Machinery and Equipment of Specialty Tape

AUCTION SALE
Machinery and Equipment of Specialty Tape Manufacturer
Former
Equipment Of:
COMPAC Corporation
103 Bilby Road,
Hackettstown, New Jersey 07840
Sale Date: Tuesday, April 14th, 2009 at 10:30 a.m.
Inspection Date: Monday, April 13th from 8:00 a.m. to 4:00 p.m. and morning of sale
Cameron Type 14 92" Trim Width Surface Rewind Slitter
Arrow Mdl. 444 (modified) 58" Wide Turret Rewinder
New
2004
New
2008
Azco 52" Trim Width Sheeter
Megtec Systems CleanSwitch – 250-95 (25,000 SCFM RTO System)
With BIDSPOTTER.COM you can bid on items in auctions from anywhere in the world!
To register to bid in this Koster Industries Inc. auction, please visit us at www.bidspotter.com
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
Branch Office:
Boston, Massachusetts
(978) 474-4442 • Fax: (978) 474-4673
http:www.kosterindustries.com • e-mail: info@kosterindustries.com
Cameron Type 10 72" Trim Width Surface Rewind Slitter
Cameron Type 10 72" Trim Width Surface Rewind Slitter
Cevenini Mdl. ET-7EX 60" Wide Single Knife Slitter
Cevenini 54" Wide Mdl. R-800/S Log Roll Rewinder
Geometric Mdl. S-5000 62" Trim Width Log Roll Rewinder
Lever Mdl. 500 60" Wide Single Knife Slitter
Slitting Department
Cameron Type 10 82" Trim Width Surface
Rewind Slitter, shear cut, rewind diameter,
separate shaftless unwind for 60" OD,
30 HP updated drive for 1500 FPM, 3 HP
trim blower, roll ejector, driven nip guard
Cameron Type 10 82" Trim Width Surface
Rewind Slitter, score cut platen shaft, 40"
rewind diameter, separate shaftless unwind
for 60" OD, 30 HP updated drive for 1500
FPM, 3 HP trim blower, roll ejector, driven
nip guard
Cameron Type 10 72" Trim Width Surface
Rewind Slitter, shear cut, 36" rewind
diameter, separate shaftless unwind for
60" OD, 30 HP updated drive for 1500 FPM,
3 HP trim blower, roll ejector, driven nip guard
Single Knife Slitters
and Log Rollers
Mixing Area: Note –
Installed in 2004
AIR Compressor:
Cevenini Mdl. ET-7EX 60" Wide Single
Knife Slitter, 15" dia. blade with grinder, 3"
mandrel, fully adjustable head, fully
automatic
Powder Mezzanine:
Platform 22' x 15', 11 ft. to deck, 10 feet
clear with 8' wide loading gate, (3) 2 ton
super-sac chain hoists, (3) bulk hoppers 3'
x 3' bulk hoppers with side agitators, (3)
auger drives each from individual bulk
hoppers feeding to air conveyor, gravimetric
weighing system and dust collector systems
with air blow down for air conveyor system
Note: To be sold as a lot or individual
pieces
Lever Mdl. 500 60" Wide Single Knife
Slitter, 12" max. roll diameter, 3" mandrel
Cevenini 54" Wide Mdl. R-800/S Log Roll
Rewinder, 8" maximum rewind diameter
turret, 3" shafts and adaptors for shaftless
small roll winding, 30" unwind dia.
Geometric Mdl. S-5000 62" Trim Width
Log Roll Rewinder, 18" rewind dia., 20 HP
drive, 3" rewind air shafts, automatic cutoff, shear cut slitting, 40" OD unwind
Cameron Type 14 92" Trim Width Surface
Rewind Slitter, shear cut, 50" rewind
diameter, separate shaftless unwind for
60" OD, 30 HP updated drive for 1500 FPM,
3 HP trim blower, roll ejector, driven nip guard
Arrow Mdl. 444 (modified) 58" Wide
Turret Rewinder, 6" OD maximum rewind
dia., 3" rewind air shafts, shear slitting with
wicking
Cameron Type 10 72" Trim Width Surface
Rewind Slitter, shear cut, 30" rewind
diameter, separate shaftless unwind for
48" OD, 30 HP updated drive for 1500 FPM,
3 HP trim blower, roll ejector, driven nip guard
Azco 52" Trim Width Sheeter (guillotine
type) with a Powell Driven unwind for a 40"
diameter roll, heavy duty cut off knife,
Tidland slitters, etc. [New 2008]
Cameron Mdl. 26 58" Wide Duplex
Rewind Slitter, includes a separate unwind
for a 48" diameter roll, edge guide, shear
cut slitting, 3" dia. rewind air shafts,
17-3/4" maximum rewind diameter,
updated controls and drive
Sheeting Department
Thermal Oxidizer
Megtec Systems CleanSwitch – 250-95
(25,000 SCFM RTO System), includes a
150 HP input blower, two heat exchange
towers, 4.786 MM BTU gas burner and a
single Megtec non-contact switch valve
[New 2004]
20 HP Kaeser
Mixing Mezzanine (Dynamic Air):
(2) Powder mixing tanks, each with auger
feed
Storage Tanks:
(6) 70" diameter x 96" high for finished
product storage tanks, stainless steel with 2
HP agitator motors
Control System:
AB Micrologix 1500 with Panelview 550
(5) Flow meters for water, latex and MagOx
Corporate Office:
555 Broadhollow Road, Melville, NY 11747
(631) 454-1766 • Fax: (631) 454-1779
REM Turret Rewind, 60" wide, 40"
diameters, flying splicer, new drives and
controls in 2007
Approximately 10 Shaftless and Shafted
Unwinds and Rewinds, 60" to 80" widths,
40" to 60" diameters
(2) Mixing kettles, 90" diameter x 49" deep
with Ross mixer and paddle mixer and
loading doors
(2) 6000 gal. mild steel tanks, vertical –
internally coated
Unwinds and Rewinds/
coater components
(2) Black Clawson Turret Unwind Stands
for approx. 62" wide x 40" diameter rolls
(2) Grind kettles with 40 HP Meyers mixer
and pump out system
(2) 6000 gal. mild steel tanks, horizontal –
internally coated
(2) Clever Brooks 200 HP Gas Fired Boilers
[New 2004]
Portable Rewinder, 60" wide x 40" OD roll,
compact motor and drive, etc.
(2) Table Top Rewinders 6" wide to 10"
diameter rolls
CMS Coating Head, servo control, touchscreen interface, precision application, etc.
CMS Moisturizing System
Core Cutter
Coretech Core Cutter Mdl. CM-11 with
60" wide core hopper, automatic core feed,
3" ID tooling, PLC controlled core cutting
with widths and counts, dust control system
Branch Office:
Boston, Massachusetts
(978) 474-4442 • Fax: (978) 474-4673
http:www.kosterindustries.com • e-mail: info@kosterindustries.com
Powder Mezzanine
Mixing Mezzanine
Storage Tanks
Two Black Clawson Turret Unwind Stands
Coretech Core Cutter Mdl. CM-11
New
2004
(2) Clever Brooks 200 HP Gas Fired Boilers
Lab Equipment
Perkin-Elmer FTIR Spectrometer, with Spectrum One
HATR Accy-Flat Plate, Spectrum One UATR AccyReflection, Saddler Flame Retardant Packate
Cheminstruments Tape Release Tester
Cheminstruments Rolldown Tester
SAFT Oven-30 Position Shear Tester
Cheminstruments 30 Bank Shear Tester
Lindberg-Blue M Oven
Tinius Olsen H5KS Tensile Tester
perforator
Machine Shop Equipment
84" Full Perforator, 1/8" x 1/8" square
pattern and 84" lane perforator 1/8" x 1/8,
both with driven rubber rolls
Davis #4 Keyseater
Toolroom Machinery
and Equipment
Steering Rolls, 88" face width to be used
as a web guide
Engine Lift and one of many portable roll
carts
Multiple Roll Aligner (Rewinder), approx.
15" wide
Dake 50-Ton Hydraulic Press
Beach Puncture Tester-Metrotec PM01
Brookfield Viscometer
Cheminstruments Probe Tack Tester-PT1000
Much More, Including: Lab Benches, Lab Hoods,
Glassware, Testers, Etc.
Bridgeport Mill Head On Brown & Sharpe
Base, 8" x 40" table
Large quantity of approx. 80" wide bowed
rolls and idler rolls
Meuser 16" x 96" Lathe
Miscellaneous Shop Support, Including:
Toolroom Machinery and Equipment,
Pedestal Fans, Workbenches, Electrical
Supplies, Hardware, Hand Tools, Blowers,
Shop Furniture, Hose Reels, Etc.
South Bend 8" Bench Lathe
Miscellaneous
DoAll Model ML Vertical Bandsaw with
Blade Welder
Hockmeyer Mixer
Cincinnati #4 Horizontal Mill, 18" x 72"
table
Four 7.5 HP Venturi Type Trim Blowers
with hoses and scrap bins
Delta Rockwell Table Saw
Reverse Roll Coating Head, 60" wide,
3 roll nip fed
Bridgeport Mill 9" x 40", variable speed,
power feeds
84" Full
Perforator
Assorted Fans
(5) Forklift
Trucks,
including Yale,
Caterpiller and
Clark, up to
5,000# capacity
Office Furniture and Equipment,
Consisting of: Desks, Chairs, Lateral and
Standard File Cabinets, Tables, Secretarial
Chairs, Executive Offices, etc.
With BIDSPOTTER.COM you can bid
on items in auctions from anywhere
in the world! To register to bid in this
Koster Industries Inc. auction, please
visit us at www.bidspotter.com
CMS Moisturizer
Systems
Machinery and Equipment of Specialty Tape Manufacturer
Former
Equipment Of:
COMPAC Corporation
103 Bilby Road,
Hackettstown, New Jersey 07840
IMPORTANT NOTICE TO ALL BUYERS REGARDING AUCTION PAYMENT: 13%
Buyer’s Premium. A minimum deposit of 25% on all lots purchased is required at the
time of sale in cash, certified or cashier’s check. Company or personal checks will
be accepted only if accompanied by a letter from the payor’s bank guaranteeing
unqualified payment to Koster Industries Inc. All checks must be made payable to
the order of Koster Industries Inc. Direct bank wire transfers to the account of Koster
Industries Inc. on balances due will be accepted with prior arrangement. No lot may
be removed until complete settlement is made.
IMPORTANT NOTICE: Although information has been obtained from sources deemed
reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as
to the accuracy of the information herein contained. It is for this reason that buyers
should avail themselves of the opportunity to make inspection prior to the sale.
AUCTIONEERS • LIQUIDATORS • APPRAISERS
555 Broadhollow Road, Melville, New York 11747
(631) 454-1766 • Fax (631) 454-1779
Presorted
First-Class Mail
U.S. Postage
PAID
Minneapolis, MN
Permit #3723
AXP/9030730
AUCTION SALE
Machinery and Equipment of Specialty Tape Manufacturer
Former
Equipment Of:
COMPAC Corporation
103 Bilby Road,
Hackettstown, New Jersey 07840
Sale Date: Tuesday, April 14th, 2009 at 10:30 a.m.
Inspection Date: Monday, April 13th from 8:00 a.m. to 4:00 p.m. and morning of sale
REM Turret
Rewind
Directions:
From Newark International Airport: Take ramp onto I-78W toward
Garden State Parkway/Clinton. Take right fork onto RT-24W toward
Springfield (I-287-Morristown). Go 9.8 miles and take the Mahwah
(I-80) exit onto I-287 North. Go 4.2 miles and take exit #41B/
Delaware Water Gap onto I-80W. Take Exit #19/Hackettstown/
Allamuchy. Turn left onto CR-517. Turn left onto Bilby Road.
With BIDSPOTTER.COM you can bid on items in auctions
from anywhere in the world! To register to bid in this Koster
Industries Inc. auction, please visit us at www.bidspotter.com