W1 - Industrial Quality Parts

Transcription

W1 - Industrial Quality Parts
Low Pressure
W1-W4 One Ear Clips
W1-W4 Two-Ear Clips
6-8
7-9
W1-W4 One Ear clips with W4 Inner-Ring
10 - 11
W1-W4 DIN 3016 P-Clips
12 - 14
W1 Spring Clip
16
W1 Wire Clip
17
W1 Wire Clip with screw
18
W1 « Normal » Mini Clip
19
W2 Open worm-drive
20
W4 Endless band and housing
21
Medium Pressure
W4 Preformed Clamp
26
W1 « Stepless » Ear Clamp
27
W4 Clip Clamp
28
W1 Fixed diameter “S” Clamp
29
W1 - W2 - W3 - W4 - W5 ASFA –L Worm-Drive Clip
30 - 34
W1 - W2 - W3 - W4 - W5 ASFA –S Worm-Drive Clip
35 - 39
High Pressure
W1 Super Heavy-Duty Clamp
W2 - W4 - W5 Supra Heavy-Duty Clamp
44
45 - 47
Special Clamps
W1 DIN 3021 Heavy-duty Spring-Band clip
52
W4 Double-Bridge Clip
54
ASFA TI Titanium Hose Clip
55
W1 Exhaust Clamp
53
W3 Teflon-Coated inner rings for ASFA – L/S Clips
56 - 57
W3 ASFA –L /S Worm-Drive Clips Black Finish
58 - 59
W3 ASFA –S CT Constant-Tension Worm-Drive Clip
60
W2 Supra CT Constant-Tension Heavy-Duty Clamp
61
Assortment Boxes and Display Units
Worm-Drive Hose Clip Assortments
66
Worm-Drive Hose Clip Display Units
67
Tools and Accessories
Manual Tools
68
Automatic Tools
69
* This catalogue is the property of The Mikalor Group. Any partial or total reproduction of any or all of the contents is strictly forbidden, unless written authorization is given by the Mikalor Group or any of the
companies which form part of it. Failure to comply with this will lead to prosecution
* Due to continuing technical advances and the evolution of materials used in the manufacture of the products in this catalogue, Mikalor reserves the right to carry out dimensional, structural or other modifications
without giving prior notice, with the aim of supplying a better and more efficient product.
* This catalogue is for commercial use. The details contained herein do not constitute a contract in any way.
1
Mikalor, S.A.
Mikalor has been present on the international fasteners market since 1943 with a
wide range of top-quality products which provide fastening solutions adapted to
the needs of modern industry. The Mikalor Group is made up of 6 companies,
including Mikalor S.A.
Damesa is responsible for all the distribution and commercialization of the products
manufactured by the different companies which form the Mikalor Group.
The main manufacturing unit, where our range of hose clips and clamps is
manufactured, is situated in Sabadell, a city about 25 km from Barcelona. Our state
of the art manufacturing processes, certified to ISO 9001 and ISO 14001, guarantee
the best range of hose clips and clamps in the world.
Our use of high-tech manufacturing processes has given Mikalor an important
presence in international automotive, white-goods and general industrial sectors.
Mikalor Products
Our aim is to fulfill the highest expectations of industrial clients offering the widest
possible range of solutions, working at all times to maintain and improve our
competitive position in the market. Environmental concerns are forefront in our
minds at all stages of the manufacturing process.
Mikalor is the only company in the world at this time to have launched a range of
100% Titanium worm-drive hose clips, designed to meet the needs of the most
demanding of industrial applications.
Our R&D department has also pioneered products such as the famous SUPER
heavy-duty hose clamp, the benchmark by which all other heavy-duty clamps are
judged.
Mikalor Technology
Our technological capacity means that we can offer our clients optimum fastening
solutions tailored to their particular needs.
One of the main factors which makes Mikalor stand out from the rest is the role of
I+D+i. Our I+D department is the motor of the Mikalor Group, constantly pushing
the boundaries of the range of solutions we can provide to our clients.
Development projects are coordinated from the beginning to the end of the life cycle
of a product as solutions are trialed and tested during all phases of product design,
development, CAE, prototypes and tooling manufacture.
We work hand in hand with the engineering departments of our clients in the search
for the appropriate fastening solution for each particular case.
The majority of the products designed and manufactured by Mikalor are patented
worldwide.
2
Our Committment
We are committed to the promotion of a corporate culture whose aim is the total
satisfaction of our clients’ expectations. In order to fulfill this commitment, Mikalor
invests continuously in technology and human resources in order to ensure the
quality of our products and processes.
All the different processes involved in the manufacture of Mikalor products are
carried out by companies which are members of the Group. Rather than outsourcing
manufacturing processes, we prefer to have full control of the entire process from
the design of the product right up to the moment it is delivered to our client.
This commitment means that we can guarantee top quality products which have
been manufactured in optimum conditions.
The future for Mikalor
Here at Mikalor we are working towards the future, in solid partnership with our
clients, and with total respect for current environmental legislation.
Mikalor and the rest of the companies in the group are already working and will
continue to work tirelessly to rise to the challenges which lie ahead.
This dedication to the pursuit of excellence, which has been a constant aspect of
our activities since Mikalor was founded in 1943, has led to the supreme quality
of our product range and the unparalleled worldwide reputation of the Mikalor
brand.
Material Specification Chart according
to international norms
W1
W2
W3
W4
DIN
AISI
EN
AFNOR
UNI
(Germany)
(United States)
(EU)
(France)
(Italy)
SCREW
1.0213
BAND AND HOUSING
1.0935
Zinc-plated steel Cr3
SCREW
1.0213
Qst 36-3 Steel white zinc-plated Cr3
BAND AND HOUSING
1.4016
430
X6Cr17
SCREW
1.4016
430
X6Cr17
Z8C 17
BAND AND HOUSING
1.4016
430
X6Cr17
430 S 17
X8Cr 17
SCREW
1.4031
304
X5CrNi1810
Z7CN 18-09
X5 CrNi1810
BAND AND HOUSING
1.4031
304
X5CrNi1810
304 S 16
X5 CrNi1810
Qst 36-3 Steel white zinc-plated Cr3
X8Cr 17
304 S 31
W5
SCREW
1.4571
316
X6CrNiMoTi17122
Z6CNDT 17-12
X6 CrNiMo Ti17 12
320 S 31
BAND AND HOUSING
(1.4401)
316
3
(X5CrNiMo17122)
(Z7 CDN 17-12-02)
(X5 CrNiMo 17 12)
Low Pressure
W1
One-ear clip
Zinc-plated mild steel
One Ear Clip - A10R W1
Information
The use of One-ear clips is an
economical solution for many
simple hose assemblies, as they
can be used with air or other
fluids. The practical design of
ear clips means that they are
tamper-proof once mounted.
The edges are rounded to avoid
damage to the hose.
One-ear clips are easy, fast and
safe to mount.
Ø Application
min. max.
7
8
9
10
11
12
14
16
9
10
11
12
13
14
16
18
Reference
W1
A
B
C
D
E
Box
Quantity
Packing
Colour
03012080
03012072
03012013
03012021
03012030
03012048
03012056
03012064
9,3
10,3
11,3
12,3
13,3
14,3
16,3
18,5
5,5
6,0
6,5
7,0
7,5
8,0
8,5
9,5
6,0
6,0
6,5
6,5
6,5
7,0
7,0
7,0
13,0
14,0
15,0
16,0
17,0
18,5
20,5
23,0
0,8
0,8
0,8
0,8
0,9
1,0
1,1
1,2
1000
1000
1000
500
500
500
500
500
8000
8000
8000
8000
8000
4000
4000
4000
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
* Please see pages 68 and 69 for further information regarding application tools.
ØA
W1 Materials
C
B
Band:
St 34 steel (DIN 2393 C)
Finish:
Silver-white Cr3 Zinc-Plated
E
D
6
W1 Two-ear clip
Zinc-plated mild steel
Two-ear Clip - A20R W1
Information
The use of Two-ear clips is an
economical solution for many
simple hose assemblies, used
with air or other fluids. The two
ears give the clip extra grip and
help to maintain constant
pressure around the hose. Fitting
is more flexible and exact. The
practical design of Two-ear clips
means that they clamp firmly on
to the assembly and are tamperproof once mounted. The edges
are rounded to avoid damage to
the hose
Two-ear clips offer great versatility
in simple hose assemblies.
Ø Application
min. max.
5
7
9
10
11
13
14
15
17
18
20
22
23
25
28
31
34
37
40
43
7
9
11
12
13
15
17
18
20
21
23
25
27
28
31
34
37
40
43
46
Reference
W1
A
B
C
D
E
Box
Quantity
Packing
Colour
03012101
03012110
03012128
03012099
03012136
03012144
03012152
03012160
03012179
03012187
03012195
03012208
03012216
03012224
03012232
03012240
03012259
03012267
03012275
03012283
7,3
9,3
11,3
12,3
13,3
15,3
17,5
18,5
20,5
21,5
23,5
25,5
27,5
28,5
31,5
34,5
37,5
40,5
43,5
46,5
4,3
4,8
5,3
5,5
5,8
6,3
6,6
7,0
7,6
7,9
8,5
9,1
9,4
10,0
10,6
11,0
11,5
12,0
12,5
13,0
6,0
6,0
6,5
6,5
6,5
7,0
7,0
7,5
7,5
8,0
8,0
8,5
8,5
9,0
9,0
9,5
9,5
10,0
10,0
10,5
11,0
13,5
17,0
18,0
19,0
21,5
24,0
25,0
27,0
28,0
31,0
33,0
35,0
36,0
39,0
42,0
46,0
49,0
53,0
56,0
0,6
0,8
0,8
0,9
0,9
1,0
1,2
1,2
1,2
1,2
1,3
1,4
1,4
1,4
1,4
1,4
1,6
1,6
1,6
1,6
2000
1000
1000
1000
500
500
500
500
250
250
250
200
200
200
100
100
100
100
75
75
16000
16000
8000
8000
8000
4000
4000
500
2000
2000
2000
1600
1600
200
800
800
800
100
600
75
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
* Please see pages 68 and 69 for further information regarding application tools.
ØA
C
W1 Materials
B
Band:
St 34 steel (DIN 2393 C)
Finish:
Silver-white Cr3 Zinc-Plated
E
D
7
Stainless-steel
One-ear clip
W4
AISI-304 Stainless steel (A2)
One-ear Clip - A10R INOX W4
Information
The use of One-ear clips is an
economical solution for many
simple hose assemblies, used with
air or other fluids. Due to the AISI304 steel used in the manufacture
of these clips, their corrosion
resistance is outstanding.
They are recommended especially
in outdoor applications. Like all
ear clips, once mounted they are
tamper-proof.
Ø Application
min. max.
7
8
9
10
11
12
13
14
15
16
17
18
9
10
11
12
13
14
15
16
17
18
19
20
Reference
W4
A
B
C
D
E
Box
Quantity
Packing
Colour
23012440
23012087
23012010
23012028
23012036
23012044
23012079
23012052
23012458
23012060
23012423
23012431
9,3
10,3
11,3
12,3
13,3
14,3
15,3
16,3
17,5
18,5
19,5
20,5
5,5
6,0
6,5
7,0
7,5
8,0
8,0
8,5
9,0
9,0
9,5
10,0
6,0
6,0
6,5
6,5
6,5
7,0
7,0
7,0
7,0
7,0
7,5
7,5
13,0
14,0
15,0
16,0
17,0
18,5
19,5
20,5
22,0
23,0
24,0
25,0
0,8
0,8
0,8
0,8
0,8
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1000
1000
1000
1000
500
500
500
500
500
500
250
250
16000
16000
8000
8000
8000
8000
4000
4000
4000
4000
2000
2000
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
* Please see pages 68 and 69 for further information regarding application tools.
ØA
W4 Materials
C
B
Band:
AISI-304
Stainless steel (A2)
Finish:
100% Stainless steel
E
D
8
Stainless-steel
Two-ear clip
W4
AISI-304 Stainless steel (A2)
Two-ear Clip - A20R INOX W4
Information
The use of Two-ear clips is an
economical solution for many simple
hose assemblies, used with air or
other fluids. The two ears give the
clip extra grip and help to maintain
constant pressure around the hose.
Fitting is more flexible and exact.
The practical design of Two-ear clips
means that they clamp firmly on to
the assembly and cannot be
removed once mounted. The edges
are rounded to avoid damage to the
hose
Due to the AISI-304 steel used in
the manufacture of these clips, their
corrosion resistance is outstanding.
They are recommended especially
in outdoor applications.
Ø Application
min. max.
5
7
9
11
13
14
15
17
18
20
22
7
9
11
13
15
17
18
20
21
23
25
Reference
W4
A
B
C
D
E
Box
Quantity
Packing
Colour
23012108
23012116
23012124
23012132
23012140
23012159
23012167
23012175
23012183
23012191
23012204
7,3
9,3
11,3
13,3
15,3
17,5
18,5
20,5
21,5
23,5
25,5
4,3
4,8
5,3
5,8
6,3
6,6
7,0
7,6
7,9
8,5
9,1
6,0
6,0
6,5
6,5
7,0
7,0
7,5
7,5
8,0
8,0
8,5
11,5
14,5
16,5
19,0
21,5
24,0
25,0
27,0
28,5
30,5
33,5
0,6
0,8
0,8
0,8
1,0
1,0
1,0
1,0
1,0
1,0
1,2
2000
1000
1000
500
500
500
500
250
250
250
200
16000
16000
8000
8000
4000
4000
4000
2000
2000
2000
1600
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
* Please see pages 68 and 69 for further information regarding application tools.
ØA
C
W4 Materials
B
Band:
AISI-304
Stainless steel (A2)
Finish:
100% Stainless steel
E
D
9
One-ear clip
W1
With Stainless steel Inner-Ring
One Ear Clip - A10RB W1
Information
The use of One-ear clips is an
economical solution for many
simple hose assemblies, as they
can be used with air or other
fluids. The inner-ring means that
the clamp fits snugly around the
hose, while the beveled edges
protect the hose from being
pinched during fitting.
The use of One ear clips with
Inner-ring is recommended when
working with delicate hoses.
Ø Application
min. max.
Reference
W1
A
B
C
D
E
F
G
Box
Quantity
Packing
Colour
7,5
8,0
9,0
10,0
10,5
11,5
13,0
15,0
03011009
03011010
03011029
03011037
03011045
03011053
03011061
03011070
9,3
10,3
11,3
12,3
13,3
14,3
16,3
18,5
5,5
6,0
6,5
7,0
7,5
8,0
8,5
9,5
6,0
6,0
6,5
6,5
6,5
7,0
7,0
7,0
13,0
14,0
15,0
16,0
17,0
18,5
20,5
23,0
0,8
0,8
0,8
0,8
0,9
1,0
1,1
1,2
8,5
9,5
10,5
11,5
12,5
13,3
15,3
17,3
7,8
7,8
7,8
7,8
7,8
8,8
8,8
8,8
1000
1000
1000
500
500
500
500
500
8000
8000
8000
8000
8000
4000
4000
4000
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
8,5
9,5
10,5
11,5
12,5
13,3
15,3
17,3
* Please see pages 68 and 69 for further information regarding application tools.
ØA
W1 Materials
C
B
Band:
St 34 steel (DIN 2393 C)
Finish:
Silver-white Cr3 Zinc-Plated
Inner-ring:
AISI-301 Stainless steel
E
D
G
F
10
Stainless steel
One-ear clip
W4
With Stainless steel Inner-Ring
One Ear Clip - A10RI W4
Information
The use of One-ear clips is an
economical solution for many
simple hose assemblies, as they
can be used with air or other fluids.
The inner-ring means that the
clamp fits snugly around the hose,
while the beveled edges protect
the hose from being pinched
during fitting.
Due to the AISI-304 steel used in
the manufacture of these clips,
their corrosion resistance is
outstanding. These clips are
especially recommended in
outdoor and marine applications.
Ø Application
min. max.
7,5
8,2
9,0
10,0
10,5
11,5
12,5
13,0
14,0
15,0
16,0
17,0
8,5
9,5
10,5
11,5
12,5
13,5
14,5
15,3
16,3
17,3
18,3
19,3
Reference
W4
A
B
C
D
E
F
G
Box
Quantity
Packing
Colour
23012300
23012319
23012327
23012335
23012343
23012351
23012360
23012378
23012386
23012394
23012407
23012415
9,3
10,3
11,3
12,3
13,3
14,3
15,3
16,3
17,5
18,5
19,5
20,5
5,5
6,0
6,5
7,0
7,5
8,0
8,0
8,5
9,0
9,5
9,5
10,0
6,0
6,0
6,5
6,5
6,5
7,0
7,0
7,0
7,0
7,0
7,5
7,5
13,0
14,0
15,0
16,0
17,0
18,5
19,5
20,5
22,0
23,0
24,0
25,0
0,8
0,8
0,8
0,8
0,8
1,0
1,0
1,0
1,0
1,0
1,0
1,0
8,5
9,5
10,5
11,5
12,5
13,5
14,5
15,3
16,3
17,3
18,3
19,3
7,8
7,8
7,8
7,8
7,8
7,8
8,8
8,8
8,8
8,8
9,8
9,8
2000
1000
1000
1000
500
500
500
500
250
250
250
200
16000
8000
8000
8000
8000
4000
4000
4000
4000
4000
2000
2000
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
* Please see pages 68 and 69 for further information regarding application tools.
ØA
C
W4 Materials
B
Band:
AISI-304
Stainless steel (A2)
Finish:
100% Stainless steel
E
D
Inner-ring:
AISI-301
Stainless steel
G
F
11
Rubber-lined P-Clip
W1
DIN: 3016
Rubber lined P-Clip W1
Article
Reference
AGD
Diameter
Application
Bandwidth
a
d
Metric
screw
Box
Quantity
Packing
AGD 5/12
AGD 6/12
AGD 8/12
AGD 10/12
AGD 12/12
AGD 13/12
AGD 14/12
AGD 15/12
AGD 16/12
AGD 17/12
AGD 18/12
AGD 19/12
AGD 20/12
AGD 21/12
AGD 22/12
AGD 23/12
AGD 24/12
AGD 25/12
AGD 26/12
AGD 27/12
AGD 28/12
AGD 6/15
AGD 8/15
AGD 10/15
AGD 12/15
AGD 13/15
AGD 14/15
AGD 15/15
AGD 16/15
AGD 17/15
AGD 18/15
AGD 19/15
AGD 20/15
AGD 21/15
AGD 22/15
03003856
03003864
03003880
03003901
03003928
03003936
03003944
03003952
03003960
03003979
03003987
03003995
03004007
03004015
03004023
03004031
03004040
03004058
03004066
03004074
03004082
03004664
03004680
03004701
03004728
03004736
03004744
03004752
03004760
03004779
03004787
03004795
03004808
03004816
03004824
5
6
8
10
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
6
8
10
12
13
14
15
16
17
18
19
20
21
22
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
15
15
15
15
15
15
15
15
15
15
15
15
15
15
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
200
200
200
200
200
200
200
200
200
200
200
200
200
100
100
100
100
100
100
100
100
200
200
200
200
200
200
200
200
200
200
200
200
100
100
200
200
200
200
200
200
200
200
200
200
200
200
200
100
100
100
100
100
100
100
100
200
200
200
200
200
200
200
200
200
200
200
200
100
100
Information
T h e s e r u b b e r- l i n e d
connecting clamps, known
in the market as «P-Clips»
are composed of a zincplated mild steel band lined
with EPDM rubber. This
rubber lining allows for firm
and safe clamping in the
application zone and
prevents potential damage
due to vibration. The screw
holes at either end of the
band are reinforced with
steel plates to ensure they
clamp down firmly. P-Clips
are
particularly
recommended for
mounting pipes, electric
cable ducting and hoses
in a multitude of different
applications.
12
Rubber lined P-Clip W1
Article
Reference
AGD
Diameter
Application
Bandwidth
a
d
Metric
screw
Box
Quantity
Packings
AGD 23/15
AGD 25/15
AGD 26/15
AGD 28/15
AGD 30/15
AGD 32/15
AGD 34/15
AGD 35/15
AGD 37/15
AGD 38/15
AGD 40/15
AGD 11/20
AGD 12/20
AGD 13/20
AGD 14/20
AGD 15/20
AGD 16/20
AGD 18/20
AGD 19/20
AGD 20/20
AGD 21/20
AGD 22/20
AGD 23/20
AGD 24/20
AGD 25/20
AGD 27/20
AGD 28/20
AGD 30/20
AGD 32/20
AGD 34/20
AGD 35/20
AGD 36/20
AGD 38/20
AGD 40/20
03004832
03004859
03004867
03004883
03004904
03004920
03004947
03004955
03004971
03004980
03005000
03005510
03005528
03005536
03005544
03005552
03005560
03005579
03005587
03005595
03005608
03005616
03005624
03005632
03005640
03005667
03005675
03005691
03005712
03005739
03005747
03005755
03005771
03005798
23
25
26
28
30
32
34
35
37
38
40
11
12
13
14
15
16
18
19
20
21
22
23
24
25
27
28
30
32
34
35
36
38
40
15
15
15
15
15
15
15
15
15
15
15
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
50
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
50
* P-Clips can be supplied in bandwidths of up to 25mm and in diameters up to 100 mm.
* Other models of DIN 3016 P-Clips are also available on request. (Forms B, C, E and F and also without rubber lining.
W1 Materials
d
Band:
Mild steel reinforced
at both ends
Finish:
Galvanized and lined
with EPDM rubber
d
W1
a
13
Rubber-lined P-Clip
W4
DIN: 3016
Rubber lined P-Clip W4
Article
Reference
AGD
Diameter
Application
Bandwidth
a
d
Metric
screw
Box
Quantity
Packing
AGID 5/12
AGID 6/12
AGID 8/12
AGID 10/12
AGID 12/12
AGID 13/12
AGID 14/12
AGID 15/12
AGID 16/12
AGID 17/12
AGID 18/12
AGID 19/12
AGID 20/12
AGID 21/12
AGID 22/12
AGID 23/12
AGID 24/12
AGID 25/12
AGID 26/12
AGID 27/12
AGID 28/12
AGID 6/15
AGID 8/15
AGID 10/15
AGID 12/15
AGID 13/15
AGID 14/15
AGID 15/15
AGID 16/15
AGID 17/15
AGID 18/15
AGID 19/15
AGID 20/15
AGID 21/15
AGID 22/15
43003859
43003867
43003883
43003904
43003920
43003939
43003947
43003955
43003963
43003971
43003980
43003998
43004000
43004018
43004026
43004034
43004042
43004050
43004069
43004077
43004085
43004667
43004683
43004704
43004720
43004739
43004747
43004755
43004763
43004771
43004780
43004798
43004800
43004819
43004827
5
6
8
10
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
6
8
10
12
13
14
15
16
17
18
19
20
21
22
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
15
15
15
15
15
15
15
15
15
15
15
15
15
15
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
200
200
200
200
200
200
200
200
200
200
200
200
200
100
100
100
100
100
100
100
100
200
200
200
200
200
200
200
200
200
200
200
200
100
100
200
200
200
200
200
200
200
200
200
200
200
200
200
100
100
100
100
100
100
100
100
200
200
200
200
200
200
200
200
200
200
200
200
100
100
Information
T h e s e r u b b e r- l i n e d
connecting clamps,
known in the market as
«P-Clips» are composed
of an AISI 304 stainless
steel band lined with
EPDM rubber. This rubber
lining allows for firm and
safe clamping in the
application zone and
prevents potential
damage due to vibration.
The screw holes at either
end of the band are
reinforced with steel plates
to ensure they clamp
down tight. P-Clips are
particularly recommended
for mounting pipes,
electric cable ducting and
hoses in automotive and
marine applications and
in industrial machinery.
The fact that this P-Clip is
manufactured entirely in
AISI-304 material makes it
ideal for marine
applications.
14
Rubber lined P-Clip W4
Article
Reference
AGD
Diameter
Application
Bandwidth
a
d
Metric
screw
Box
Quantity
Packing
AGID 23/15
AGID 25/15
AGID 26/15
AGID 28/15
AGID 30/15
AGID 32/15
AGID 34/15
AGID 35/15
AGID 36/15
AGID 37/15
AGID 38/15
AGID 40/15
AGID 11/20
AGID 12/20
AGID 13/20
AGID 14/20
AGID 15/20
AGID 16/20
AGID 18/20
AGID 19/20
AGID 20/20
AGID 21/20
AGID 22/20
AGID 23/20
AGID 24/20
AGID 25/20
AGID 27/20
AGID 28/20
AGID 29/20
AGID 30/20
AGID 32/20
AGID 34/20
AGID 35/20
AGID 36/20
AGID 38/20
AGID 40/20
43004835
43004851
43004860
43004886
43004907
43004923
43004940
43004958
43004966
43004974
43004982
43005002
43005512
43005520
43005539
43005547
43005555
43005563
43005571
43005580
43005598
43005600
43005619
43005627
43005635
43005643
43005661
43005670
43005688
43005696
43005715
43005731
43005740
43005758
43005774
43005790
23
25
26
28
30
32
34
35
37
38
40
11
12
13
14
15
16
18
19
20
21
22
23
24
25
27
28
30
32
34
35
36
38
40
15
15
15
15
15
15
15
15
15
15
15
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
50
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
50
* P-Clips can be supplied in bandwidths of up to 25mm and in diameters up to 100 mm.
* Other models of DIN 3016 P-Clips are also available on request. (Forms B, C, E and F and also without rubber lining.
W4 Materials
d
Band:
AISI 304 stainless steel (A2)
with reinforced screw holes
Lining:
EPDM rubber
d
W1
a
15
Spring Clip
W1
Zinc-plated mild steel
Spring Clip AML W1
Information
Spring clips are designed to
distribute pressure uniformly
around the application zone.
Their use is recommended
when the hose is subject to
rapid changes in temperature
which cause expansion and
contraction of the materials
used in the assembly. The
spring clip maintains pressure
during this process, thereby
preventing leaks.
Nominal
diameter Ø
Reference
W1
6
7
8
9
10
11
12
14
15
17
20
02014025
02014033
02014041
02014050
02014068
02014076
02014084
02014092
02014105
02014113
02014121
Ø di
5,5
6,4
7,4
8,4
9,3
10,3
11,1
12,9
13,5
15,6
18,4
±0,1
±0,1
±0,15
±0,15
±0,2
±0,2
±0,2
±0,2
±0,2
±0,2
±0,4
b
a
± 0,05
s
Box
Quantity
Packing
7
7
8
8
8
8
8
8
8
8
8
3
3
3
3,5
3,5
4
4
4
4,5
4,5
3,2
0,5
0,5
0,6
0,6
0,7
0,7
0,7
0,8
0,8
0,8
0,8
500
500
500
500
500
500
500
500
500
500
500
8000
8000
8000
4000
4000
4000
4000
4000
4000
4000
4000
W1 Materials
s
Band:
Spring steel
a
Finish:
Silver-white
Cr3 Zinc-Plated
b
Ødi
16
Wire Clip
W1
Zinc-plated mild steel
Spring Clip AAL W1
Information
Wire clips are a competitivelypriced clamping solution in
certain applications. They are
used in low-pressure
applications and particularly
with small diameter sunken
spiral hoses.
W1 Materials
Ø Application
min. nominal max.
Reference
W1
r1
r2
h
max.
Øs
Box
Quantity
Packing
7,6
8,1
8,6
9,1
9,6
10,1
10,7
11,3
11,9
12,8
13,3
14
14,8
15,5
16,4
17,3
18,2
19,2
20,2
02016012
02016020
02016039
02016047
02016055
02016063
02016071
02016080
02016098
02016100
02016119
02016127
02016135
02016143
02016151
02016160
02016178
02016186
02016194
10,7
10,7
10,9
11,0
11,8
13,5
14,8
14,8
16,4
17,2
17,0
18,0
19,6
21,0
22,0
21,3
22,7
23,3
24,0
8,2
8,3
8,6
9,0
9,0
10,5
11,4
11,9
12,4
13,7
14,0
14,5
16,0
16,4
16,6
16,5
17,7
18,0
18,5
5,5
5,5
5,5
5,5
5,5
6,3
6,3
6,3
7,3
7,3
7,3
7,3
8,4
8,4
8,4
8,4
9,9
9,9
9,9
1,0
1,0
1,0
1,0
1,0
1,2
1,2
1,2
1,5
1,5
1,5
1,5
1,8
1,8
1,8
1,8
2,0
2,0
2,0
1000
1000
1000
1000
1000
1000
1000
1000
1000
500
500
500
500
500
500
500
500
500
500
8000
8000
8000
8000
8000
8000
8000
8000
4000
4000
4000
4000
4000
4000
4000
4000
2000
2000
2000
7,3
7,8
8,3
8,8
9,3
9,8
10,4
11,0
11,6
12,1
12,9
13,6
14,4
14,8
15,9
16,8
17,7
18,7
19,6
7,8
8,3
8,8
9,3
9,9
10,4
11,0
11,6
12,3
13,1
13,6
14,4
15,1
15,9
16,8
17,7
18,7
19,6
20,6
h
r1
Band:
Spring steel
r2
Finish:
Cr3 Zinc-Plated
Ød
Øs
17
W1
Wire Clip with screw
Zinc-plated mild steel
AAT W1 wire clip with screw
Information
This clip was specially
designed for use with hoses
incorporating an outer helix.
It is generally used when
installing ventilation ducting.
The double-wire
construction of this clip
means that it sits comfortably
on either side of the helix
and can then be clamped
down firmly thanks to the
screw-tightening system.
* The maximum application pressure
can vary depending on the type of
hose used and the geometry of the
coupling.
d Ø Application
mm
Application
d Ø Application
nominal mm
d
e
l
h
max
Box
quantity
Packing
9,5-12
10,5-13
11,5-14
12,5-15
13,0-16
13,5-17
15,0-18
15,5-19
17,0-20
17,5-21
18,5-22
19,0-23
21,0-24
21,5-25
23,5-27
25,0-29
27,0-31
29,0-33
30,5-35
33,0-37
35,5-40
38,5-43
41,0-46
43,5-49
46,5-53
50,5-56
53,5-60
56,5-64
60,0-68
64,0-72
68,5-76
72,5-80
76,5-84
03030015
03030023
03030031
03030040
03030058
03030066
03030074
03030082
03030090
03030103
03030111
03030120
03030138
03030146
03030154
03030162
03030170
03030189
03030197
03030200
03030218
03030226
03030234
03030242
03030250
03030269
03030277
03030285
03030293
03030306
03030314
03030322
03030330
11,0
11,5
12,5
13,0
14,0
15,0
16,0
17,0
18,0
18,5
20,0
20,5
22,0
23,5
25,0
27,0
29,0
31,5
33,0
37,0
38,5
41,0
43,5
46,5
50,5
53,5
56,5
60,0
64,0
68,5
72,5
76,5
80,0
1,5
1,5
1,5
1,5
1,8
1,8
1,8
1,8
1,8
1,8
2,0
2,0
2,0
2,2
2,2
2,2
2,2
2,2
2,2
2,2
2,2
2,5
2,5
2,5
2,5
2,5
2,8
2,8
2,8
2,8
3,0
3,0
3,0
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
5,5
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
8,0
8,0
8,0
8,0
8,0
10,0
10,0
10,0
10,0
10,0
10,0
10,0
20
20
20
20
25
25
25
25
25
25
30
30
30
30
30
30
30
30
30
30
30
40
40
40
40
40
50
50
50
50
50
50
50
11
11
11
11
11
11
11
11
11
11
13
13
13
13
13
13
13
13
13
13
13
15
15
15
15
15
18
18
18
18
18
18
18
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
200
200
200
200
200
200
200
200
200
100
100
100
100
100
100
100
100
100
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
800
800
800
800
800
800
800
800
800
400
400
400
400
400
400
400
400
400
W1 Materials
d
e
Wire:
Steel wire
B-UNI 3823
Screw:
6.6 grade steel Cr3
zinc-plated
l
18
h
“Normal” Mini-clip
W1
Zinc-plated mild steel
“Normal” Mini-clip W1
Information
The use of malleable mild
steel in the manufacture of
the “Normal” mini-clip
means that when tightened,
the clip adapts perfectly to
the hose, clamping firmly
but gently. This clip is
recommended for use with
gaseous fluids at low
pressure.
“Normal” also has many
applications in the
automotive industry.
* The maximum pressure may vary
depending on the type of hose and
coupling used
d Ø Application
mm
Reference
W1
r
e
a
b
s
Max. values*
Torque Nm
Max. values*
Pressure (Bars)
Box
Quantity
Packing
6
8
9
9,5-10
10-11
12-13
13-14
14-15
15-17
16-18
18-20
19-21
20-22
22-25
23-26
25-28
26-29
29-32
03010510
03010528
03010536
03010544
03010552
03010560
03010579
03010587
03010595
03010608
03010616
03010624
03010632
03010640
03010659
03010667
03010675
03010683
M3
M3
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8,4
9
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
9
9
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,4
0,4
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
15,0
14,0
15,0
14,0
13,0
12,5
12,5
12,0
12,0
11,5
10,5
10,5
10,5
9,5
9,0
8,5
8,5
8,0
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1600
1600
1600
1600
1600
1600
1600
1600
1600
1600
1600
800
800
800
800
800
800
800
min. 2 threads
e
W1 Materials
r
Screw:
6.6 strength
Grey-white Cr3 zincplated
Nut:
6 strength
White Cr3 zinc-plated
Band:
St 02Z (DIN 1.0226)
b
Ød
s
a
9±0.1
19
Open worm-drive clip
W2
Open Light series
Open worm-drive clip W2
Information
The reduced dimensions of
the housing of this clip make
it the ideal choice for
applications where space is
limited. It is especially
recommended for clamping
small bore thin-walled hoses.
Ø Application
mm
Reference
W2
a
b
c
d
7-11
11-19
03016401
03016410
7,5
7,5
0,4
0,4
7
7
5
5
Max. values Max. values
Torque Nm Pressure (Bars)
1,5
1,5
Box
Quantity
Packing
100
100
1600
1600
35
35
* The maximum pressure may vary
depending on the type of hose and
coupling used.
W2 Materials
Screw and housing:
Qst 34-3 Mild Steel
(DIN 1.0213)
Grey-white Cr3 zincplated
Band:
Stainless steel X8CR 17
(DIN 1.4016)
(AISI-430)
c
d
a
b
20
Endless worm-drive
band and housing
W4
Stainless steel AISI-304
Endless worm-drive Band and separate housing W4
Description
Article
CT/CP/CC
Reference
Bandwidth
(mm)
a
Minimum
band thickness
b
Stamped Band
Stamped Band
Housing (A)
CT 7-25
CT 7-2
CCT 7
03011109
03011117
03011125
7
7
-
0,6
0,6
-
25 mts.
AISI-304 Stainless steel
2 mts.
AISI-304 Stainless steel
100 unid. AISI-302 Cu Stainless steel
Stamped Band
Stamped Band
Housing (A)
CT 11-30
CT 11-3
CCT 11-A
03011168
03011176
03011184
11
11
-
0,6
0,6
-
30 mts.
AISI-304 Stainless steel
3 mts.
AISI-304 Stainless steel
100 unid. AISI-302 Cu Stainless steel
Perforated Band
Perforated Band
Housing (B)
Housing (B)
CP 14-30
CP 14-5
CCP 14-10
CCP 14-50
03012961
03011192
03011205
03012970
14
14
-
0,6
0,6
-
30 mts.
5 mts.
10 unid.
50 unid.
Information
Endless banding with comes in
rolls which are between 2m to
30m long, allowing you to clamp
just about any assembly without
knowing the diameter in advance.
The housings are supplied
separately and can be fitted easily
where and when they are needed.
With an endless band and a box
of buckles you can cover just
about any eventuality. Ideally
suited for the client with temporary
or occasional clamping needs.
Packing
Material
AISI-304 Stainless steel
AISI-304 Stainless steel
AISI-302 Cu Stainless steel
AISI-302 Cu Stainless steel
W4 Materials
b
Band:
AISI-304
Stainless steel (A2)
Housing:
AISI-3025
(Cu Stainless steel)
a
21
Technical
Information
B
A
C
One Ear clips with W4 Inner-Ring
E
D
F
G
A
The inner-ring protects the underside of the ear, thereby ensuring
a snug fit around the hose.
B
Materials free of toxic substances in accordance with current
environmental legislation.
C
Easy and quick to mount.
D
Rounded band edges which prevent cutting or damage to the
hose.
E
All clips and clamps are marked with the clamping range and the
Mikalor logo.
F
Wide variety of models which cover many applications.
G
In order to decide which ear clamp to use, add 1 mm to the OD
of the tube or hose to be clamped.
S-1
Polar Diagram
Sectors
Force Kg
S1
S2
S3
S4
S5
S6
S7
S8 Average
16,1 17,8 18,1 8,2 20,4 18,8 19,8 11,2
S-2
S-8
20,
10,
16,3
0
0
0
S-3
S-7
Torque / Efficiency [ Nm / daN ]
B
S-6
S-4
S-5
D
Rubber-lined P-Clip
E
C
A
The rubber lining allows for firm and safe clamping, protecting the
application zone and preventing potential damage due to vibration.
B
The screw holes at either end of the band are reinforced with steel
plates to avoid damage to the holes when a lot of force is applied.
C
The steel used to manufacture the band is very flexible, meaning
that the P-Clip fits snugly into the application zone.
D
The band, reinforcements and band edges are electro zinc-plated,
thereby increasing resistance to corrosion.
E
All clips are marked with the application diameter and the Mikalor
logo.
F
Special diameters are also available on request.
A
F
22
Technical
Information
C
D
Wire Clip with screw
B
E
A
A
The steel wire used in the manufacture of this clip is free from
burrs and sharp edges which could cut into the hose or ducting.
B
Possibility of manual or automatic mounting.
C
Screw-tightening system ensures effective clamping.
D
Double-wire construction sits comfortably on either side of the
helix.
E
Materials free of toxic substances in accordance with current
environmental legislation.
S-1
S-2
S-8
40,
20,
0
0
0
Sectors
S1
S2
S3
S4
S5
S6
S7
S8 Average
23,0 17,4 22,8 22,8 17,6 18,2 21,6 14,2
28,0 21,6 32,8 30,4 24,6 24,4 29,2 22,8
1,2 Nm
1,6 Nm
S-3
S-7
Polar Diagram
19,7
26,7
S-6
S-4
S-5
Torque / Efficiency [ Nm / daN ]
A
C
« Normal » Mini-clip
A
Nut and bolt tightening system designed for use with a variety
of different tools.
B
Rounded band edges prevent the clamp from digging into and
cutting the hose.
C
Unique nut-blocking system makes tightening easy.
D
The band end forms a bridge which avoids possible damage to
the hose during tightening and allows for a snug fit around the
hose.
E
Materials free of toxic substances in accordance with current
environmental legislation.
F
All clips are marked with the application diameter and the Mikalor
logo.
B
D
E
F
S-1
S-2
S-8
60,
Polar Diagram
Sectors
S1
S2
S3
S4
S5
S6
S7
30,
S8 Average
0
0
0
1 Nm
1,4 Nm
23,0 31,5 43,0 60,0 29,5 32,5 22,5 30,5
25,7 33,0 44,4 62,5 33,0 34,2 23,9 35,0
S-3
S-7
34,1
36,5
Torque / Efficiency [ Nm / daN ]
S-4
S-6
S-5
23
Medium
Pressure
Stainless steel
Preformed Clamp
W4
Stainless steel AISI-304
Stainless Steel Preformed Clamp W4
Information
The housing of the
preformed clamp
incorporates a stainless
steel ball-bearing making
it extremely tough once
fastened. Due to its
design, the preformed
clamp is tamper-proof
once it has been
mounted. Two different
bandwidths are available,
meaning that you can
clamp up to 114kg, and
in applications up to
300mm in diameter.
Ø Application
mm
4,50
4,50
4,50
4,50
4,50
4,50
4,50
7,94
7,94
7,94
7,94
7,94
7,94
7,94
x
x
x
x
x
x
x
x
x
x
x
x
x
x
33
50
76
102
156
207
245
50
76
102
135
150
207
312
Reference
W4
Width
Maximum
diameter
Length
Strength
(Kg)
Box
Quantity
Packing
03002001
03002002
03002003
03002004
03002005
03002006
03002007
03002008
03002009
03002010
03002011
03002012
03002013
03002014
4,50
4,50
4,50
4,50
4,50
4,50
4,50
7,94
7,94
7,94
7,94
7,94
7,94
7,94
33
50
76
102
156
207
245
50
76
102
135
150
207
312
130
200
300
370
520
680
840
200
300
370
450
500
680
1020
46
46
46
46
46
46
46
114
114
114
114
114
114
114
100
100
100
100
100
100
100
100
100
100
100
100
100
100
8000
6000
5000
4500
100
100
100
4500
4000
3000
2000
2500
100
100
* Please see pages 68 and 69 for further information regarding application tools.
W4 Materials
Band:
AISI-304
Stainless steel (A2)
Ball:
AISI-304
Stainless steel (A2)
26
W1
« Stepless » Ear Clamp
Mild steel
« Stepless » Ear Clamp W1
Information
This clamp was designed
for use in assembly lines
due to the fast and easy
locking system. It is
normally mounted where a
fixed diameter clamp is
required and the application
zone is difficult to access.
It is particularly useful in low
t o m e d i u m p re s s u re
applications and for air
transfer. Once this clamp
has been mounted it is
tamper-proof.
Ø Nominal
mm
10,0
13,3
15,7
17,5
17,8
18,5
20,5
29,5
31,6
39,6
40,5
45,5
47,0
51,5
52,5
65,5
Ø Application
min.
max.
8,3
10,8
13,2
14,3
14,6
15,3
17,3
26,3
28,4
36,4
37,3
42,3
43,8
48,3
49,3
62,3
9,5
12,8
15,2
17,0
17,3
18,0
20,0
29,0
31,1
39,1
40,0
45,0
46,5
51,0
52,0
65,0
Ref.
H max.
mm
S
(mm)
03030752
03030760
03030779
03030787
03030795
03030808
03030816
03030824
03030832
03030840
03030859
03030867
03030875
03030883
03030891
03030904
14,0
17,0
20,1
22,5
22,5
23,5
26,0
35,5
37,5
45,5
46,5
51,5
53,0
57,5
58,5
71,5
0,6
0,6
0,6
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
a
+ 0,15
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
Box
Quantity
Packing
1000
1000
1000
1000
1000
1000
500
500
500
500
500
200
200
100
100
100
8000
8000
5000
5000
5000
4000
3000
3000
2000
2000
1000
400
400
500
500
500
* This clamp is also available in W4 (AISI 304) material upon request.
H
W1 Materials
Band:
Mild Steel Dx51D + AZ 150
(UNI EN 10215)
S +- 0,03
Ø max.
27
a
W4
Clip Clamp
Stainless Steel AISI-304
Clip Clamp W4
Information
The design of the locking
device of the Clip Clamp
allows for great precision
when mounting. This device,
together with the folds in the
material confers a spring
function to this clamp,
meaning that it can maintain
constant pressure around
the hose. The rounded band
edges avoid damage to the
hose. This clamp is
especially suited for use in
assembly lines and industrial
applications due to the ease
with which it can be
mounted and the AISI 304
material employed in its
manufacture.
Article
Ø Application
min.
max.
Reference
Bandwidth
a
Box
Quantity
Packing
clip 8
clip 9
clip 10
clip 11
clip 12
clip 13
clip 14
clip 15
clip 16
clip 17
clip 18
clip 19
clip 20
clip 21
clip 22
clip 23
clip 24
8,5
9,5
10,5
11,5
12,5
13,5
14,5
15,5
16,5
17,5
18,5
19,5
20,5
21,5
22,5
23,5
24,5
03030410
03030429
03030437
03030445
03030453
03030461
03030470
03030488
03030496
03030509
03030517
03030525
03030533
03030541
03030550
03030568
03030576
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
1000
1000
1000
1000
1000
1000
500
500
500
500
500
500
500
500
500
500
500
4000
4000
4000
4000
4000
4000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
9,5
10,5
11,5
12,5
14,0
15,0
16,0
17,0
18,0
19,0
20,0
21,0
22,0
23,0
24,0
25,0
26,0
W4 Materials
Ø
Ap
pl
ic
at
io
n
Band:
AISI 304 (A2)
Stainless Spring Steel
a
28
Fixed diameter
“S” Clamp
W1
Zinc-plated mild steel
Fixed diameter “S” Clamp W1
Information
The fixed diameter « S » clamp
was designed to ensure the
best possible fit of hose and
coupling. This is achieved due
to the fact that once the clamp
has been mounted and
tightened it fits the desired
diameter exactly. The design
of this clamp means that it can
be used with hoses mounted
on metallic or plastic couplings.
It is particularly recommended
for certain sectors ranging from
medical
machinery
manufacture to the automotive
industry.
Ø Application
d
Article
ADF
Reference
a
Box
quantity
Packing
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
ADF10/9
ADF11/9
ADF12/9
ADF13/9
ADF14/9
ADF15/9
ADF16/9
ADF17/9
ADF18/9
ADF19/9
ADF20/9
ADF21/12
ADF22/12
ADF23/12
ADF24/12
ADF25/12
ADF26/12
ADF27/12
ADF28/12
ADF29/12
ADF30/12
ADF31/15
ADF32/15
ADF33/15
ADF34/15
ADF35/15
ADF36/15
03032010
03032029
03032037
03032045
03032053
03032061
03032070
03032088
03032096
03032109
03032117
03032740
03032758
03032766
03032774
03032782
03032790
03032803
03032811
03032820
03032838
03033443
03033451
03033460
03033478
03033486
03033494
9
9
9
9
9
9
9
9
9
9
9
12
12
12
12
12
12
12
12
12
12
15
15
15
15
15
15
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
100
100
100
100
100
100
100
100
100
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
400
400
400
400
400
400
400
400
400
400
* This clamp can be supplied in diameters up to 120mm and in bandwidths up to 30mm.
W1 Materials
Band:
Mild steel DIN 1.0935
b
Ø
d
Screw:
6.6 grade Cr3 white
zinc-plated mild steel
Nut:
6.6 grade Cr3 white
zinc-plated mild steel
a
29
9mm L-band
Worm-drive Hose clip
W1
DIN: 3017 Light series
Asfa-L W1 Hose Clip (9mm bandwidth)
Information
Thanks to the exclusive
design of the housing, the
ASFA LW1 hose clip has
excellent performance while
being at the same time very
compact. The cold-formed
stamped band thread,
smoothed on the
underside, combined with
the beveled band edges
protects the hose from any
damage.
The ASFA-L W1 hose clip
complies fully with the DIN
3017 norm and also with
the RoHs directive EU
2002/95/EC dated 1st July
2006.
This clip is ideal for general
industrial applications.
Ø Application Reference
mm
W1
8-16
12-22
16-27
20-32
25-40
30-45
32-50
40-60
50-70
60-80
70-90
80-100
90-110
100-120
110-130
120-140
130-150
140-160
03008753
03008761
03008770
03008788
03008796
03008809
03008817
03008825
03008833
03008841
03008850
03008868
03008876
03008884
03008892
03008905
03008913
03008921
L
s + 0,1
h
a +- 0,3
max.
0
max.
0,2
22,1
22,1
23,6
23,6
25,6
25,6
25,6
25,6
29,6
29,6
29,6
29,6
29,6
29,6
29,6
29,6
29,6
29,6
0,6
0,6
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
b
max.
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
Max. Values* Max. Values*
Box
Torque Nm Pressure (Bars) Quantity
3,0
3,0
3,5
3,5
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
45
45
42
36
32
28
24
19
17
15
13
11
10
9
8
7
6
5
Packing
200
200
200
200
100
100
100
100
100
100
50
50
25
25
25
25
25
25
800
800
800
800
800
800
800
400
100
100
400
400
200
200
25
25
25
25
* The maximum application pressure
can vary depending on the type of
hose used and the geometry of the
coupling.
Patented Worldwide.
W1 Materials
b
MADE IN SPAIN
Screw:
Qst 36-3 Mild steel
(DIN 1.0213)
Silver-white Cr3 Zinc-Plated
MADE IN SPAIN
Band and Housing:
Galvanized steel
S/EN 10292
(DIN 1.0935)
Ø
L
MADE IN SPAIN
h
S
a
30
9mm L-band
Worm-drive Hose clip
W2
DIN: 3017 Light series
Asfa-L W2 Hose Clip (9 mm bandwidth)
Information
Thanks to the exclusive design
of the housing, the ASFA-L W2
hose clip has excellent
performance while being at the
same time very compact. The
cold-formed stamped band
thread, smoothed on the
underside, combined with
beveled band-edges protects
the hose from damage. The
AISI-430 Stainless steel finish
of the band and housing make
this a very attractive clip.
The ASFA-L W2 hose clip
complies fully with the DIN
3017 norm and also with the
RoHs
directive
EU
20032/95/EC dated 1st July
2006.
This clip is very popular in the
h a rd w a re a n d d o m e s t i c
markets and in automotive
applications.
Ø Application
mm
8-12
8-16
12-22
16-27
20-32
25-40
30-45
32-50
40-60
50-70
60-80
70-90
80-100
90-110
100-120
110-130
120-140
130-150
140-160
Reference
L s + 0,1
h
b
Max. Values*
a +- 0,3
W2
max.
0
max.
0,2 max. Torque Nm
03016508
03016516
03016524
03016532
03016540
03016559
03016567
03016575
03016583
03016591
03016604
03016612
03016620
03016639
03016647
03016655
03016663
03016671
03016680
18,0
22,1
22,1
23,6
23,6
25,6
25,6
25,6
25,6
26,6
26,6
26,6
26,6
26,6
26,6
26,6
26,6
26,6
26,6
0,6
0,6
0,6
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
9,5
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
7,5
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
11,5
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
1,5
3,0
3,0
3,5
3,5
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
Max. Values*
Pressure (Bars)
Box
Quantity
Packing
40
45
45
42
36
32
28
24
19
17
15
13
11
10
9
8
7
6
5
200
200
200
200
200
100
100
100
100
100
100
50
50
25
25
25
25
25
25
1600
800
800
800
800
800
800
800
400
100
100
400
400
200
200
25
25
25
25
*The maximum application pressure
can vary depending on the type of
hose used and the geometry of the
coupling.
Patented Worldwid
W2 Materials
b
MADE IN SPAIN
Screw:
Qst 36-3 Mild steel
(DIN 1.0213)
Silver-white Cr3 ZincPlated
MADE IN SPAIN
Band and Housing:
X6Cr17 Stainless steel
(DIN 1.4016) (AISI430)
Ø
L
MADE IN SPAIN
h
S
a
31
9mm L-band
Worm-drive Hose clip
W3
DIN: 3017 Light series
Hose Clip Asfa-L W3
Information
Thanks to the exclusive
design of the housing, the
ASFA LW3 hose clip has
excellent performance while
being at the same time very
compact. The cold-formed
stamped band thread,
smoothed on the underside,
combined with the beveled
band edges protects the
hose from any damage.
The ASFA-L W3 hose clip
complies fully with the DIN
3017 norm and also with
the RoHs directive EU
2002/95/EC dated 1st July
2006.
ASFA LW3 is specially
recommended for use in the
automotive industry.
Ø Application Reference
mm
W3
8-16
12-22
16-27
20-32
25-40
30-45
32-50
40-60
50-70
60-80
70-90
80-100
90-110
100-120
110-130
120-140
130-150
140-160
03016014
03016022
03016030
03016049
03016065
03016073
03016081
03016090
03016102
03016110
03016129
03016137
03016145
03016153
03016161
03016170
03016188
03016196
L
s + 0,1
h a + 0,3
- 0,2
max.
0
max.
22,1
22,1
23,6
23,6
25,6
25,6
25,6
25,6
29,6
29,6
29,6
29,6
29,6
29,6
29,6
29,6
29,6
29,6
0,6
0,6
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
b
max.
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
(9mm bandwidth)
Max. Values* Max. Values*
Box
Torque Nm Pressure (Bars) Quantity
3,0
3,0
3,5
3,5
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
45
45
42
36
32
28
24
19
17
15
13
11
10
9
8
7
6
5
Packing
200
200
200
200
100
100
100
100
100
100
50
50
25
25
25
25
25
25
800
800
800
800
800
800
800
400
100
100
400
400
200
200
25
25
25
25
* The maximum application pressure
can vary depending on the type of
hose used and the geometry of the
coupling.
Patented Worldwide.
W3 Materials
b
MADE IN SPAIN
Screw:
AISI 430
Stainless steel
MADE IN SPAIN
Band and housing:
Stainless steel
X6Cr17 (DIN 1.4016)
(AISI-430)
Ø
L
MADE IN SPAIN
h
S
a
32
9mm L-band
Worm-drive Hose clip
W4
DIN: 3017 Light series
Asfa-L W4 Hose Clip
Information
Thanks to the exclusive design
of the housing, the ASFA-L W4
hose clip has excellent
performance while being at the
same time very compact. The
cold-formed stamped band
thread, smoothed on the
underside, combined with
beveled band-edges protects
the hose from damage.
The ASFA-L W4 hose clip
complies fully with the DIN 3017
norm and also with the RoHs
directive EU 20032/95/EC
dated 1st July 2006.
This clip is ideally for use in the
marine industry, due to the
corrosion resistance offered by
the use of AISI-304 stainless
steel in its manufacture.
Ø Application Reference
L
s
h a + 0,3
- 0,2
mm
W4
max. ± 0,05 max.
8-12
8-16
12-22
16-27
20-32
25-40
30-45
32-50
40-60
50-70
60-80
70-90
80-100
90-110
100-120
110-130
120-140
130-150
140-160
03014000
03014019
03014027
03014035
03014043
03014051
03014060
03014078
03014086
03014094
03014107
03014115
03014123
03014140
03014158
03014166
03014174
03014182
03014190
18,0
22,1
22,1
23,6
23,6
25,6
25,6
25,6
25,6
29,6
29,6
29,6
29,6
29,6
29,6
29,6
29,6
29,6
29,6
0,6
0,6
0,6
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
9,5
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
b
Max. Values*
max.
Torque Nm
7,5
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
11,5
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
1,5
3,0
3,0
3,5
3,5
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
(9 mm bandwidth)
Max. Values*
Pressure (Bars)
Box
Quantity
Packing
40
45
45
42
36
32
28
24
19
17
15
13
11
10
9
8
7
6
5
200
200
200
200
200
100
100
100
100
100
100
50
50
25
25
25
25
25
25
800
800
800
800
800
800
800
800
400
100
100
400
400
200
200
25
25
25
25
*The maximum application pressure
can vary depending on the type of hose
used and the geometry of the coupling.
Patented Worldwide.
W4 Materials
b
MADE IN SPAIN
Screw:
AISI-304 Cu (A2)
Stainless steel
Band and Housing:
X5CrNi1810
Stainless steel
(DIN 1.4301)
(AISI-304) (A2)
MADE IN SPAIN
Ø
L
MADE IN SPAIN
h
S
a
33
9mm L-band
Worm-drive Hose clip
W5
DIN: 3017 Light series
Asfa-L W5 Hose Clip (9 mm bandwidth)
Information
Thanks to the exclusive
design of the housing, the
ASFA-L W5 hose clip has
excellent performance while
being at the same time very
compact. The cold-formed
stamped band thread,
smoothed on the underside,
combined with beveled
band-edges protects the
hose from damage.
The ASFA-L W5 hose clip
complies fully with the DIN
3017 norm and also with the
RoHs directive EU
20032/95/EC dated 1st July
2006.
This clip is ideally for use in
the petrochemical, foodstuffs
and marine industry due to
the outstanding corrosion
resistance offered by the use
of AISI-316 stainless steel in
its manufacture
Ø Application Reference
L
s
h
b
Max. Values*
a +- 0,3
0,2 max. Torque (Nm)
mm
W5
max. ± 0,05 max.
8-16
12-22
16-27
20-32
25-40
30-45
32-50
40-60
50-70
60-80
70-90
80-100
90-110
100-120
110-130
120-140
130-150
140-160
03015759
03015767
03015775
03015783
03015804
03015812
03015820
03015839
03015847
03015855
03015863
03015871
03015880
03015898
03015900
03015919
03015927
03015935
22,1
22,1
23,6
23,6
25,6
25,6
25,6
25,6
29,6
29,6
29,6
29,6
29,6
29,6
29,6
29,6
29,6
29,6
0,6
0,6
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
3,0
3,0
3,5
3,5
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
Max. Values*
Pressure (Bars)
Box
Quantity
Packing
45
45
42
36
32
28
24
19
17
15
13
11
10
9
8
7
6
5
200
200
200
200
100
100
100
100
100
100
50
50
25
25
25
25
25
25
800
800
800
800
800
800
800
400
100
100
400
400
200
200
25
25
25
25
*The maximum application pressure
can vary depending on the type of
hose used and the geometry of the
coupling.
Patented Worldwide
W5 Materials
b
MADE IN SPAIN
Screw:
AISI-316 Cu
Stainless steel (A4)
Band and Housing:
X5CrNiMo 17.12.2
Stainless steel
(DIN 1.4401)
(AISI-316) (A4)
MADE IN SPAIN
Ø
L
MADE IN SPAIN
h
S
a
34
12mm S-band
Worm-drive Hose clip
W1
DIN: 3017 Heavy series
Asfa-S W1 Hose Clip (12 mm bandwidth)
Information
The ASFA-S W1 hose clip
combines an innovative
housing designed to take a lot
of torque and a sturdy 12mm
band which together make this
a high performance hose clip.
The cold-formed stamped
band thread, smoothed on the
underside, combined with
beveled band-edges protects
the hose from any damage.
The ASFA-S W1 hose clip
complies fully with the DIN
3017 norm and also with the
RoHs
directive
EU
20032/95/EC dated 1st July
2006.
This clip is ideally for use in
general industrial applications
where a robust and
competitively priced clip is
called for. The ASFA-S W1 is
especially recommended for
use in agriculture and in fluid
transfer applications.
Ø Application
mm
Reference
W1
L
s
+0,1 0
h
a +- 0,4
0,2
b
max.
Max. Values*
Torque (Nm)
Max. Values*
Pressure (Bars)
Box
Quantity
Packing
16-27
20-32
25-40
30-45
32-50
40-60
50-70
60-80
70-90
80-100
90-110
100-120
110-130
120-140
130-150
140-160
150-170
160-180
170-190
180-200
190-210
200-220
210-230
220-240
03009001
03009002
03009003
03009004
03009005
03009006
03009007
03009008
03009009
03009010
03009011
03009012
03009013
03009014
03009015
03009016
03009017
03009018
03009019
03009020
03009021
03009022
03009023
03009024
29,6
29,6
29,6
29,6
29,6
29,6
31,6
31,6
31,6
31,6
31,6
31,6
31,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
4,2
5,2
5,2
5,2
6,0
6,0
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
45
45
40
35
35
30
25
20
17
14
12
10
8
7
6
5
4
3
2
2
1,8
1,8
1,6
1,6
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
400
400
400
400
400
400
400
50
50
200
200
200
25
25
25
25
25
25
10
10
10
10
10
10
*The maximum application pressure
can vary depending on the type of
hose used and the geometry of the
coupling.
MADE IN SPAIN
Patented Worldwide
W1 Materials
b
L
Screw:
Qst 36-3 Mild steel
(DIN 1.0213)
Silver-white Cr3
Zinc-Plated
Band and Housing:
Galvanized steel
S/EN 10292
(DIN 1.0935)
Ø
h
S
a
35
12mm S-band
Worm-drive Hose clip
W2
DIN: 3017 Heavy series
Asfa-S W2 Hose Clip (12 mm bandwidth)
Information
The ASFA-S W2 hose clip
combines an innovative
housing and a sturdy 12mm
band which together make
this a high performance hose
clip. The cold-formed
s t a m p e d b a n d t h re a d ,
smoothed on the underside,
combined with beveled bandedges protects the hose from
any damage. The AISI-430
Stainless steel finish of the
band and housing make this
a very attractive clip.
The ASFA-S W2 hose clip
complies fully with the DIN
3017 norm and also with the
RoHs directive EU
20032/95/EC dated 1st July
2006.
This clip is ideally for use in
automotive applications, in
agriculture and in fluid transfer
applications.
Ø Application Reference
mm
W2
16-27
20-32
25-40
30-45
32-50
40-60
50-70
60-80
70-90
80-100
90-110
100-120
110-130
120-140
130-150
140-160
150-170
160-180
170-190
180-200
190-210
200-220
210-230
220-240
03017017
03017025
03017033
03017009
03017041
03017050
03017068
03017076
03017084
03017092
03017105
03017113
03017121
03017130
03017148
03017156
03017164
03017172
03017180
03017199
03017201
03017210
03017228
03017236
*The maximum application pressure
can vary depending on the type of hose
used and the geometry of the coupling.
s
+0,1 0
h
a +- 0,4
0,2
b
max.
29,6
29,6
29,6
29,6
29,6
29,6
31,6
31,6
31,6
31,6
31,6
31,6
31,6
34,6
34,6
34,6
34,6
34.6
34,6
34,6
34,6
34,6
34,6
34,6
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
Max. Values* Max. Values*
Torque (Nm) Pressure (Bars)
4,2
5,2
5,2
5,2
6,0
6,0
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
45
45
40
35
35
30
25
20
17
14
12
10
8
7
6
5
4
3
2
2
1,8
1,8
1,6
1,6
Box
Quantity
Packing
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
400
400
400
400
400
400
400
50
50
200
200
200
25
25
25
25
25
25
10
10
10
10
10
10
MADE IN SPAIN
Patented Worldwide
W2 Materials
L
b
L
Screw:
Qst 36-3 Mild steel
(DIN 1.0213)
Silver-white Cr3 Zinc-Plated
Band and Housing:
X6Cr17 Stainless steel
(DIN 1.4016) (AISI-430)
Ø
h
S
a
36
12mm S-band
Worm-drive Hose clip
W3
DIN: 3017 Heavy series
Asfa-S W3 Hose Clip (12mm bandwidth)
Information
The ASFA –S W3 hose clip
combines an innovative
housing and a sturdy 12mm
band (compared with 9mm in
the light version) which
together make this a highperformance hose clip. The
cold-formed stamped band
thread, smoothed on the
underside, combined with the
beveled band edges protects
the hose from any damage.
Manufactured in its entirety in
AISI-430 stainless steel, the
ASFA-S W3 is a very attractive
clip which complies fully with
the DIN 3017 norm and also
with the RoHs directive EU
2002/95/EC dated 1st July
2006. It is especially
recommended for use in
automotive, agricultural and
fluid transfer applications.
Ø Application Reference
mm
W3
16-27
20-32
25-40
30-45
32-50
40-60
50-70
60-80
70-90
80-100
90-110
100-120
110-130
120-140
130-150
140-160
150-170
160-180
170-190
180-200
190-210
200-220
210-230
220-240
03016209
03016217
03016225
03016233
03016241
03016250
03016268
03016276
03016284
03016292
03016305
03016313
03016321
03016330
03016348
03016356
03016364
03016372
03016380
03016399
03016428
03016436
03016444
03016452
L
s
+0,1 0
h
a +- 0,4
0,2
b
max.
29,6
29,6
29,6
29,6
29,6
29,6
31,6
31,6
31,6
31,6
31,6
31,6
31,6
34,6
34,6
34,6
34,6
34.6
34,6
34,6
34,6
34,6
34,6
34,6
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
Max. Values* Max. Values*
Torque Nm
Pressure (Bars)
4,2
5,2
5,2
5,2
6,0
6,0
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
45
45
40
35
35
30
25
20
17
14
12
10
8
7
6
5
4
3
2
2
1,8
1,8
1,6
1,6
Box
Quantity
Packing
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
400
400
400
400
400
400
400
50
50
200
200
200
25
25
25
25
25
25
10
10
10
10
10
10
* The maximum application pressure
can vary depending on the type of hose
used and the geometry of the coupling.
Patented Worldwide.
W3 Materials
MADE IN SPAIN
b
L
Screw:
Stainless steel
(AISI-430)
Band and housing:
Stainless steel X6Cr17
(DIN 1.4016)
(AISI-430)
Ø
h
S
a
37
12mm S-band
Worm-drive Hose clip
W4
DIN: 3017 Heavy series
Asfa-S W4 Hose Clip (12 mm bandwidth)
Information
The ASFA-S W4 hose clip
combines an innovative
housing and a sturdy 12mm
band which together make
this a high performance hose
clip. The cold-formed
s t a m p e d b a n d t h re a d ,
smoothed on the underside,
combined with beveled
band-edges protects the
hose from any damage. The
A S FA - S W 4 h o s e c l i p
complies fully with the DIN
3017 norm and also with the
RoHs directive EU
20032/95/EC dated 1st July
2006.
Crafted entirely from AISI-304
stainless steel, this clip is
ideally for use in marine
applications or in any
industrial assemblies where
high levels of corrosion
resistance are required.
Ø Application Referencie
mm
W4
16-27
20-32
25-40
30-45
32-50
40-60
50-70
60-80
70-90
80-100
90-110
100-120
110-130
120-140
130-150
140-160
150-170
160-180
170-190
180-200
190-210
200-220
210-230
220-240
03014730
03014510
03014529
03014748
03014537
03014545
03014553
03014561
03014570
03014588
03014596
03014609
03014617
03014625
03014633
03014641
03014650
03014668
03014676
03014684
03014692
03014705
03014713
03014721
*The maximum application pressure
can vary depending on the type of
hose used and the geometry of the
coupling.
L
s
+0,5
h
a +- 0,4
0,2
b
max.
29,6
29,6
29,6
29,6
29,6
29,6
31,6
31,6
31,6
31,6
31,6
31,6
31,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
Max. Values* Max. Values*
Torque (Nm) Pressure (Bars)
4,6
5,6
5,6
5,6
6,5
6,5
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
45
45
40
35
35
30
25
20
17
14
12
10
8
7
6
5
4
3
2
2
1,8
1,8
1,6
1,6
Box
Quantity
Packing
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
400
400
400
400
400
400
400
50
50
200
200
200
25
25
25
25
25
25
10
10
10
10
10
10
MADE IN SPAIN
Patented Worldwide
W4 Materials
b
L
Screw:
AISI-304 Cu
Stainless steel (A2)
Band and Housing:
X5CrNi1810
Stainless steel
(DIN 1.4301)
(AISI-304) (A2)
Ø
h
S
a
38
12mm S-band Wormdrive Hose clip
W5
DIN: 3017 Heavy series
Asfa-S W5 Hose Clip
Information
The ASFA-S W5 hose clip
combines an innovative
housing, a sturdy 12mm band
and is made entirely of AISI316 stainless steel. The coldformed stamped band thread,
smoothed on the underside,
combined with beveled bandedges protects the hose from
any damage. The ASFA-S W5
hose clip complies fully with
the DIN 3017 norm and also
with the RoHs directive EU
20032/95/EC dated 1st July
2006.
Crafted entirely from AISI-316
stainless steel, this clip is ideally
for use in the marine,
petrochemical and foodstuffs
sectors, where only the highest
quality Stainless steel is
acceptable due to the extreme
application conditions.
Ø Application Reference
mm
W5
16-27
20-32
25-40
30-45
32-50
40-60
50-70
60-80
70-90
80-100
90-110
100-120
110-130
120-140
130-150
140-160
150-170
160-180
170-190
180-200
190-210
200-220
210-230
220-240
03017720
03017500
03017519
03017738
03017527
03017535
03017543
03017551
03017560
03017578
03017586
03017594
03017607
03017615
03017623
03017631
03017640
03017658
03017666
03017674
03017682
03017690
03017703
03017711
L
s
h
a +- 0,4
0,2
max. ± 0,5 max.
29,6
29,6
29,6
29,6
29,6
29,6
31,6
31,6
31,6
31,6
31,6
31,6
31,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
b
max.
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
(12 mm bandwidth)
Max. Values* Max. Values*
Torque (Nm) Pressure (Bars)
4,6
5,6
5,6
5,6
6,5
6,5
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
45
45
40
35
35
30
25
20
17
14
12
10
8
7
6
5
4
3
2
2
1,8
1,8
1,6
1,6
Box
Quantity
Packing
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
400
400
400
400
400
400
400
50
50
200
200
200
25
25
25
25
25
25
10
10
10
10
10
10
*The maximum application pressure can
vary depending on the type of hose used
and the geometry of the coupling.
Patented Worldwide
W5 Materials
MADE IN SPAIN
b
Screw:
AISI-316 Cu Stainless steel (A4)
L
Band and Housing:
X5CrNiMo 17.12.2
Stainless steel
(DIN 1.4401)
(AISI-316) (A4)
Ø
h
S
a
39
Techn
Technical
Information
Inform
Technical
Information
Technical
Information
H
E
ASFA-L worm-drive hose clips
G
F
D
A
Smooth band underside which avoids damage to the hose.
B
Beveled band edges to avoid the clip cutting into the hose.
C
Cold formed stamped band thread which gives a very good grip
due to the fact that the thread is deeper than the thickness of the
material used.
D
The exclusive design of the housing keeps the screw in firm contact
with the band and means that the ASFA-L gives great performance.
E
The compact housing grips the screw preventing lateral movement
during tightening.
F
The screw was designed to take a lot of torque and can be
tightened using a variety of different tools.
G
All Mikalor hose clips are marked with the application range,
material, the Mikalor logo and the country of manufacture in
compliance with DIN 3017.
H
Manual or automatic assembly.
C
B
A
S-1
MADE IN SPAIN
S-8
140
Polar Diagram
Sectors
3 Nm
3,5 Nm
S1
S2
S3
S4
S5
S6
S7
70,
0
S8 Average
77,7 89,9 85,5 75,8 64,2 68,0 62,0 82,0
86,3 99,0 94,5 84,6 71,5 76,0 70,0 117,0
S-2
,0
0
S-3
S-7
75,0
87,4
Torque / Efficiency [ Nm / daN ]
S-4
S-6
S-5
40
nical
mation
I
E
ASFA-S worm-drive hose clips
H
F
A
Smooth band underside which avoids damage to the hose.
B
Beveled band edges to avoid the clip cutting into the hose.
C
Cold formed stamped band thread which gives a very good grip
due to the fact that the thread is deeper than the thickness of the
material used.
D
Cold formed stamped band thread which gives a very good grip
due to the fact that the thread is deeper than the thickness of the
material used.
E
The compact housing grips the screw preventing lateral movement
during tightening.
F
The screw was designed to take a lot of torque and can be
tightened using a variety of different tools.
G
The 12mm band gives extra clamping force compared to the 9mm
version.
H
All Mikalor hose clips are marked with the application range,
material, the Mikalor logo and the country of manufacture in
compliance with DIN 3017.
I
Manual or automatic assembly.
D
C
B
A
G
S-1
Polar Diagram
S-2
S-8
Sectors
4 Nm
4,5 Nm
S1
S2
S3
S4
S5
S6
S7
120
S8 Average
63,8 91,7 80,1 76,8 67,4 62,2 41,1 97,0
92,7 101,5 89,5 85,3 75,1 69,7 46,8 110,0
,0
60,
0
75,0
83,8
0
S-3
S-7
Torque / Efficiency [ Nm / daN ]
S-6
S-4
S-5
41
High Pressure
Super Heavy-Duty
Hose Clamp
W1
High Pressure series
Super Heavy-duty hose clamp W1
Information
Mikalor was the first
company to design and
produce a heavy-duty hose
clamp, and since then the
Super clamp has gone from
strength to strength. The
high strength 8.8 grade steel
nut and T-bolt mean that
Super can be tightened up
hard using many different
kinds of tool, while the
beveled edges protect the
hose from harm.
The Super clamp is in its
element in agricultural
applications, waste water
extraction, mining, quarrying
or on other sectors where a
rugged yet competitively
priced heavy-duty clamp is
required.
*The maximum application pressure
can vary depending on the type of
hose used and the geometry of the
coupling.
Patented Worldwide
W1 Materials
Ø Application Reference
d mm
W1
17-19
20-22
23-25
26-28
29-31
32-35
36-39
40-43
44-47
48-51
52-55
56-59
60-63
64-67
68-73
74-79
80-85
86-91
92-97
98-103
104-112
113-121
122-130
131-139
140-148
149-161
162-174
175-187
188-200
201-213
214-226
227-239
240-252
03018263
03018271
03018280
03018298
03018300
03018319
03018327
03018335
03018010
03018028
03018036
03018044
03018052
03018060
03018079
03018087
03018095
03018108
03018116
03018124
03018132
03018140
03018159
03018167
03018175
03018183
03018191
03018204
03018212
03018220
03018239
03018247
03018255
r
e
a
b
s
Max. Values*
Torque Nm
Max. Values*
Pressure (Bars)
Box
Quantity
Packing
M5
M5
M5
M5
M6
M6
M6
M6
M7
M7
M7
M7
M7
M7
M8
M8
M8
M8
M8
M8
M8
M8
M8
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
8
8
8
8
10
10
10
10
11
11
11
11
11
11
13
13
13
13
13
13
13
13
13
17
17
17
17
17
17
17
17
17
17
18 +0,2
18 +0,2
18 +0,2
18 +0,2
20 +0,3
20 +0,3
20 +0,3
20 +0,3
22 +0,2
22 +0,2
22 +0,2
22 +0,2
22 +0,2
22 +0,2
24 +0,4
24 +0,4
24 +0,4
24 +0,4
24 +0,4
24 +0,4
24 +0,4
24 +0,4
24 +0,4
26 +0,5
26 +0,5
26 +0,5
26 +0,5
26 +0,5
26 +0,5
26 +0,5
26 +0,5
26 +0,5
26 +0,5
19,8
19,8
19,8
19,8
22
22
22
22
24,5
24,5
24,5
24,5
24,5
24,5
26,5
26,5
26,5
26,5
26,5
26,5
26,5
26,5
26,5
29
29
29
29
29
29
29
29
29
29
0,6
0,6
0,6
0,6
0,8
0,8
0,8
0,8
1,2
1,2
1,2
1,2
1,2
1,2
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
4,5
4,5
4,5
4,5
8
8
8
8
16
16
16
16
16
16
25
25
25
25
25
25
25
25
25
50
50
50
50
50
50
50
50
50
50
48
48
45
45
42
42
40
40
44
44
40
40
36
36
28
28
28
20
20
20
12
12
12
9
9
9
6
6
6
3
3
3
3
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
400
400
400
400
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
b
e
T-Bolt:
8.8 grade steel
Yellow-zinc plated
S
r
Band and Bridge:
Mild steel
Yellow zinc-plated
Washer and Trunions:
Mild steel
Yellow zinc-plated
SECTION A-A
Ød
44-47
Pat.
a
44
Supra Heavy-Duty Hose
Clamp Stainless Steel
W2
High Pressure series
Supra Heavy-duty hose clamp W2
Information
The Supra range is the natural
evolution of the Super W1
Clamp. Due to its revolutionary
swiveling bridge, Supra W2 can
be mounted in the most
awkward applications without
having to remove the hose. It
can be opened up and fastened
again when in place without
dislodging any other parts of the
clamp, making assembly much
easier.
Thanks to the beveled edges,
the hose is protected from
damage. The Supra W2 clamp
complies fully with the RoHs
directive EU 20032/95/EC dated
1st July 2006.
The high-strength bolt, designed
and manufactured by Mikalor
specifically for this clamp,
together with the captive nut and
spacer system allow you to
clamp the most demanding of
hose assemblies.
This is the clamp of choice for
professionals in the industrial
hose, automotive and agricultural
machinery sectors as well as in
all industrial applications where
an outstanding and above all
reliable heavy-duty clamp is
required.
*The maximum application pressure
can vary depending on the type of hose
used and the geometry of the coupling.
Patented Worldwide
Ø Application
d mm
Reference
W2
r
e
a
b
Max. Values*
Torque (Nm)
Max. Values*
Pressure (Bars)
Box
Quantity
Packing
17-19
19-21
21-23
23-25
25-27
27-29
29-31
31-34
34-37
37-40
40-43
43-47
47-51
51-55
55-59
59-63
63-68
68-73
73-79
79-85
85-91
91-97
97-104
104-112
112-121
121-130
130-140
140-150
150-162
162-174
174-187
187-200
200-213
213-226
226-239
239-252
03019012
03019020
03019039
03019047
03019055
03019063
03019071
03019080
03019098
03019100
03019119
03019127
03019135
03019143
03019151
03019160
03019178
03019186
03019194
03019207
03019215
03019223
03019231
03019240
03019258
03019266
03019274
03019282
03019290
03019303
03019311
03019320
03019338
03019346
03019354
03019362
M6
M6
M6
M6
M6
M6
M7
M7
M7
M7
M7
M7
M7
M7
M7
M7
M7
M8
M8
M8
M8
M8
M8
M8
M8
M8
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
8
8
8
8
8
8
10
10
10
10
10
10
10
10
10
10
10
13
13
13
13
13
13
13
13
13
15
15
15
15
15
15
15
15
15
15
18 +0,2
18 +0,2
18 +0,2
18 +0,2
18 +0,2
18 +0,2
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
19,8
19,8
19,8
19,8
19,8
19,8
22
22
22
22
22
22
22
22
22
22
22
27,5
27,5
27,5
27,5
27,5
27,5
27,5
27,5
27,5
31
31
31
31
31
31
31
31
31
31
10
10
10
10
10
10
13
13
13
13
13
16
16
16
16
16
16
30
30
30
30
30
30
30
30
30
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
40
40
40
40
40
36
36
36
36
36
36
28
28
28
20
20
20
12
12
12
9
9
9
6
6
6
3
3
3
3
50
50
50
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
400
400
400
400
400
200
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
b
e
W2 Materials
r
Band and Bridge:
X6Cr17 Stainless steel
(DIN 1.4016) (AISI-430)
Bolt:
Qst 36-3 Mild steel
(DIN 1.0213)
Silver-white Cr3 Zinc-Plated
8.8
Ød
Pat.
SECTION A-A
43-47
A
A
45
a
Supra Heavy-Duty Hose
Clamp Stainless Steel
W4
High Pressure series
Supra Heavy-duty hose clamp W4
Information
The Supra range is the natural
evolution of the Super W1 Clamp.
Due to its revolutionary swiveling
bridge, Supra W4 can be
mounted in the most awkward
applications without having to
remove the hose. It can be
opened up and fastened again
when in place without dislodging
any other parts of the clamp,
making assembly much easier.
Thanks to the beveled edges, the
hose is protected from damage.
The Supra W4 clamp complies
fully with the RoHs directive EU
20032/95/EC dated 1st July
2006.
The stainless steel bolt together
with the captive nut and spacer
system allow you to clamp the
most demanding of hose
assemblies.
Supra W4 is a full stainless steel
clamp, destined for demanding
applications where high corrosion
resistance is vital.
This top of the range heavy-duty
clamp is ideal for marine
applications and the foodstuffs
industry, as well as for countless
industrial applications where AISI304 stainless steel is specified.
*The maximum application pressure can
vary depending on the type of hose used
and the geometry of the coupling.
Patented Worldwide
Ø Application
mm
Reference
W4
r
e
a
b
Max. Values*
Torque (Nm
Max. Values*
Pressure (Bars)
Box
Quantity
Packing
17-19
19-21
21-23
23-25
25-27
27-29
29-31
31-34
34-37
37-40
40-43
43-47
47-51
51-55
55-59
59-63
63-68
68-73
73-79
79-85
85-91
91-97
97-104
104-112
112-121
121-130
130-140
140-150
150-162
162-174
174-187
187-200
200-213
213-226
226-239
239-252
03013016
03013024
03013032
03013040
03013059
03013067
03013075
03013083
03013091
03013104
03013112
03013120
03013139
03013147
03013155
03013163
03013171
03013180
03013198
03013200
03013219
03013227
03013235
03013243
03013251
03013260
03013278
03013286
03013294
03013307
03013315
03013323
03013331
03013340
03013358
03013366
M6
M6
M6
M6
M6
M6
M7
M7
M7
M7
M7
M7
M7
M7
M7
M7
M7
M8
M8
M8
M8
M8
M8
M8
M8
M8
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
8
8
8
8
8
8
11
11
11
11
11
11
11
11
11
11
11
13
13
13
13
13
13
13
13
13
15
15
15
15
15
15
15
15
15
15
18 +0,2
18 +0,2
18 +0,2
18 +0,2
18 +0,2
18 +0,2
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
19,8
19,8
19,8
19,8
19,8
19,8
22
22
22
22
22
22
22
22
22
22
22
27,5
27,5
27,5
27,5
27,5
27,5
27,5
27,5
27,5
31
31
31
31
31
31
31
31
31
31
10
10
10
10
10
10
12
12
12
12
12
12
16
16
16
16
16
30
30
30
30
30
30
30
30
30
45
45
45
45
45
45
45
45
45
45
40
40
40
40
40
40
35
35
35
35
35
35
30
30
30
30
30
20
20
20
15
15
15
10
10
10
6
6
6
3
3
3
3
3
3
3
50
50
50
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
400
400
400
400
400
200
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
b
e
W4 Materials
r
Band and Bridge:
X5CrNI 1810 Stainless steel
(DIN 1.4301) (AISI-304) (A2)
Bolt:
AISI 302 Cu
Stainless steel
8.8
Ød
Pat.
SECTION A-A
43-47
A
A
46
a
Supra Heavy-Duty
Hose Clamp AISI-316
Stainless Steel
W5
High Pressure Series
Supra Heavy-Duty hose clamp W5
Information
The Supra range is the natural
evolution of the Super W1 clamp.
Due to its revolutionary swiveling
bridge, the Supra W5 clamp can
be mounted in the most awkward
applications without having to
remove the hose. Once mounted,
it can be opened up and fastened
again without dislodging or losing
any of the other components of
the clamp, making assembly
much easier.
Thanks to the beveled edges,
the hose is protected from
damage. The Supra W5 clamp
complies fully with RoHs directive
EU 2002/95/EC dated 1st July
2006.
The AISI 316 stainless steel bolt
together with the captive nut and
spacer system allow you to
clamp the most demanding of
assemblies.
Supra W5 is a full stainless steel
clamp destined for demanding
applications where very high
corrosion resistance is vital.
This top of the range heavy-duty
clamp is ideal for marine
applications, foodstuff
manufacture, pharmaceutical and
petro-chemical industries and
other applications where AISI 316
stainless steel fittings are required.
The maximum application pressure can
vary depending on the type of hose
used and the geometry of the coupling.
Ø Application
mm
Reference
W5
r
e
a
b
Max. Values*
Torque Nm
Max. Values*
Pressure (Bars)
Box
Quantity
Packing
17-19
19-21
21-23
23-25
25-27
27-29
29-31
31-34
34-37
37-40
40-43
43-47
47-51
51-55
55-59
59-63
63-68
68-73
73-79
79-85
85-91
91-97
97-104
104-112
112-121
121-130
130-140
140-150
150-162
162-174
174-187
187-200
200-213
213-226
226-239
239-252
03013614
03013622
03013630
03013649
03013657
03013665
03013673
03013681
03013690
03013702
03013710
03013729
03013737
03013745
03013753
03013761
03013770
03013788
03013796
03013809
03013817
03013825
03013833
03013841
03013850
03013868
03013876
03013884
03013892
03013905
03013913
03013921
03013930
03013948
03013956
0301 3964
M6
M6
M6
M6
M6
M6
M7
M7
M7
M7
M7
M7
M7
M7
M7
M7
M7
M8
M8
M8
M8
M8
M8
M8
M8
M8
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
8
8
8
8
8
8
11
11
11
11
11
11
11
11
11
11
11
13
13
13
13
13
13
13
13
13
15
15
15
15
15
15
15
15
15
15
18 +0,2
18 +0,2
18 +0,2
18 +0,2
18 +0,2
18 +0,2
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
19,8
19,8
19,8
19,8
19,8
19,8
22
22
22
22
22
22
22
22
22
22
22
27,5
27,5
27,5
27,5
27,5
27,5
27,5
27,5
27,5
31
31
31
31
31
31
31
31
31
31
10
10
10
10
10
10
12
12
12
12
12
12
16
16
16
16
16
30
30
30
30
30
30
30
30
30
45
45
45
45
45
45
45
45
45
45
40
40
40
40
40
40
35
35
35
35
35
35
30
30
30
30
30
20
20
20
15
15
15
10
10
10
6
6
6
3
3
3
3
3
3
3
50
50
50
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
400
400
400
400
400
200
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
Patented Worldwide.
b
e
W5 Materials
r
Band and Bridge:
X5 Cr NI MO 17.12.2
(DIN 1.4401) (AISI 316) (A4)
Stainless Steel
Bolt:
AISI 316 Cu (A4)
Stainless steel
8.8
Ød
Pat.
SECCION A-A
43-47
A
A
47
a
Techn
Technical
Information
Inform
Technical
Information
D
C
G
E
B
A
I
F
H
48
nical
mation
Technical
Information
Supra Heavy-Duty Clamp
A
The design of the Supra heavy-duty clamp allows
you to clamp the most demanding of applications.
Supra complies with DIN 3017-3.
B
The welding spots at both band ends guarantee a
perfect bond meaning that Supra gives excellent
response in applications which require very high
torque.
C
High resistance bolt designed to take a lot of torque.
D
Manual or automatic assembly.
E
Swiveling bridge makes it easy to mount and dismount
Supra.
F
Beveled band edges protect the hose from damage.
G
The revolutionary design makes it impossible to
dislodge the nut and trunions.
H
Flexible material allows Supra to adapt to the
application zone, thereby guaranteeing a leak-proof
assembly.
I
All Supra Clamps are marked with the application
range, material and the Mikalor logo.
49
Special Clips
and Clamps
Heavy-duty Spring
band clip DIN 3021
W1
DIN 3021
Heavy-duty Spring band clip W1
Information
The heavy-duty spring-band
clamp is manufactured
according to DIN 3021. This
clamp is especially
recommended
for
applications where
temperature can vary from
-40ºC to +120ºC . The
design of this clamp means
that it can maintain the
same radial force despite
these changes in
temperature. It is fast and
easy to mount and is also
reusable.
Nom. d
mm
Ø min
d1
Ø max
d2
Reference
h +- 0,08
0,02
Opening
Force N
Box
Quantity
Packing
17
19
20
21
23
24
25
26
27
29
31
32
35
36
38
39
40
42
43
44
46
47
50
51
53
55
15,2
17,8
18,4
19,5
21,0
22,0
23,0
24,3
25,0
27,0
28,5
29,3
31,5
32,5
34,5
35,0
35,5
37,2
38,0
38,5
40,5
41,0
43,5
44,0
46,0
46,8
18,3
20,0
21,8
22,5
24,7
26,0
36,8
28,0
28,9
31,5
22,0
34,5
38,0
29,0
41,5
42,0
42,5
44,5
45,5
46,5
49,0
50,0
53,0
54,0
56,0
58,0
03031501
03031510
03031528
03031536
03031544
03031552
03031560
03031579
03031587
03031595
03031608
03031616
03031624
03031632
03031640
03031659
03031667
03031675
03031683
03031691
03031704
03031712
03031720
03031739
03031747
03031755
0,85
1,3
1,3
1,3
1,3
1,3
1,5
1,6
1,6
1,75
1,75
1,75
1,75
1,75
1,75
1,75
1,75
1,9
1,9
1,9
2,0
2,0
2,0
2,0
2,2
2,2
100
200
200
220
220
220
230
250
280
300
280
280
260
250
220
220
220
280
280
280
270
260
260
260
330
320
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
100
100
100
100
100
100
100
100
100
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
400
400
400
400
400
400
400
400
400
* h= thickness before surface treatment.
W1 Materials
d
Band:
50 CRV4
Steel
h
52
W1
Exhaust Clamp
Zinc-Plated Mild Steel
ATE W1 Exhaust Clamp
Information
This clamp has been
designed specifically for use
in automotive applications as
its name suggests. It is used
to join safely and securely
two metal tubes subject to
constant high temperatures
and vibration, thereby
avoiding leaks of exhaust
fumes.
Ø Application
mm
Reference
Ø min.
mm
b
+ 0,5
-
a
+ 0,2
-
Box
Quantity
Packing
27-30
30-33
33-36
39-42
40-43
42-45
45-48
47-50
48-51
49-52
52-54
53-56
55-58
57-59
58-61
61-64
67-71
71-74
03002765
03002773
03002781
03002790
03002791
03002802
03002810
03002829
03002837
03002845
03002853
03002861
03002870
03002888
03002896
03002909
03002917
03002925
27
30
33
39
40
42
45
47
48
49
52
53
55
57
58
61
67
71
30
33
36
42
43
45
48
50
51
52
54
56
58
59
61
64
71
74
1,5
1,5
2,0
2,0
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
3,0
3,0
100
100
100
100
100
100
100
100
50
50
50
50
50
50
50
50
50
50
400
400
400
400
400
400
400
400
200
200
200
200
200
200
200
200
200
200
b
W1 Materials
Bolt:
8.8 grade steel white zinc-plated
Band:
St34 (DIN 2393C) Steel
Ø
a
53
9mm L-band Stainless
steel Worm-drive clip
Double Bridge Clip
W4
Light series
Double Bridge Clip
Information
The Double Bridge clip
was developed by the
Mikalor R&D Department
due to requirements from
the ventilation sector for
a clamp suitable for spiral
hose. This is just one
example of how we put
our engineering knowhow at the service of our
customers. We work
together with our
customers to design and
craft the solution to their
needs in each case. The
Double-Bridge clip is
manufactured in AISI-304
stainless steel.
Reference
W4
Application
Ø mm
a +- 0,3
0,2
b
Max.
L
h
Box
Quantity
Packing
0301409A
0301410A
0301411B
0301412B
0301415B
0301417B
0301419B
50-70
60-80
70-90
80-100
100-120
120-140
140-160
9
9
9
9
9
9
9
14
14
14
14
14
14
14
25,6
25,6
25,6
25,6
25,6
25,6
25,6
10
10
10
10
10
10
10
100
100
100
50
25
25
25
100
100
100
50
50
50
50
*The maximum application
pressure can vary depending on
the type of hose used and the
geometry of the coupling.
Patented Worldwide
b
W4 Materials
L
Screw:
AISI-304 Cu (A2)
Stainless steel
Band and Housing:
X5CrNi 1810 Stainless steel
(DIN 1.4301) (AISI-304) (A2)
h
S
a
54
Titanium S-band
Worm-drive Hose clip
TI
100% Titanium
Titanium-TI Hose Clip (12 mm bandwidth)
Information
The use of T itanium in the
manufacture of this clip, together
with the innovative design of the
housing and the 12mm bandwidth
mean that the Titanium clip gives
superlative comparative results in
weight, performance and corrosion
resistance, not just compared with
the rest of the Mikalor worm-drive
range, but with worldwide
competition included.
We can supply all dimensions from
16-27 up to 220-240 thanks to the
re v o l u t i o n a r y m a n u f a c t u r i n g
process.
Due to the combination of its
extraordinary low weight, increased
pressure values and corrosion
resistance, this clip is
recommended for use in
competition engines, whether they
are on land, in the sea or in aircraft.
Each Titanium clip is subject to
individual quality control using
automatic control systems to
ensure that all parameters function
to perfection.
Titanium clips are hand-packed in
boxes of 4 units per diameter, which
include an instruction manual and
technical specification sheet.
This clip conforms to all EU norms
and directives.
We can truthfully say that we believe
the Titanium clip to be the world’s
finest hose clip
*The maximum application pressure
can vary depending on the type of hose
used and the geometry of the coupling.
Ø Application Reference
mm
16-27
20-32
25-40
30-45
32-50
40-60
50-70
60-80
70-90
80-100
90-110
100-120
110-130
120-140
130-150
140-160
150-170
160-180
170-190
180-200
190-210
200-220
210-230
220-240
03009502
03009510
03009529
03009537
03009545
03009553
03009561
03009570
03009588
03009596
03009609
03009617
03009625
03009633
03009641
03009650
03009668
03009676
03009684
03009692
03009705
03009713
03009721
03009730
L
s
max. +0,1 0
h
a +- 0,4
0,2
b
max.
29,6
29,6
29,6
29,6
29,6
29,6
31,6
31,6
31,6
31,6
31,6
31,6
31,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
Max. Values* Max. Values*
Torque (Nm) Pressure (Bars)
5,0
6,0
6,0
6,0
7,0
7,0
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
47
47
42
37
37
32
26
21
18
15
13
11
8,5
7,4
6,3
5,3
4,2
3,2
2,1
2,1
1,9
1,9
1,7
1,7
Box
Quantity
Packing
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
MADE IN SPAIN
b
Patented Worldwide
L
TI - Materials
Screw:
Ti-3 (3.7055)
S/ASTM B 265-79
Band:
Ti-2 (3.7035)
S/ASTM B 265-79
Housing:
Ti-1 (3.7032)
S/ASTM B 265-79
Ø
h
S
a
55
Stainless steel
inner-rings for ASFA-L
worm-drive hose clips
W4
Black finish
Inner Rings for ASFA L clips W4
Information
This inner ring for ASFA-L
worm-drive clip was designed
to give extra protection to the
hose, especially in applications
where changes in the
frequency of vibration can be
an issue. The ring also
contributes to an even
distribution of pressure around
the hose and confers a
constant tension function to
the clip. The black coating
helps to ensure that the rings
adapts correctly to the hose
assembly.
Ø Application
mm
Reference
Black
Reference
Plain
a
+0,5
-
b
Box
Quantity
Packing
8-16
12-22
16-27
20-32
25-40
30-45
32-50
40-60
50-70
60-80
70-90
80-100
90-110
100-120
110-130
120-140
130-150
140-160
73031015
73031023
73031031
73031040
73031058
73031066
73031074
73031082
73031090
73031103
73031111
73031120
73031138
73031146
73031154
73031162
73031170
73031189
03031018
03031026
03031034
03031042
03031050
03031069
03031077
03031085
03031093
03031106
03031114
03031122
03031130
03031149
03031157
03031165
03031173
03031181
13,5
13,5
13,5
13,5
13,5
13,5
13,5
13,5
13,5
13,5
13,5
13,5
13,5
13,5
13,5
13,5
13,5
13,5
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
200
200
200
200
100
100
100
100
100
100
50
50
25
25
25
25
25
25
1000
800
800
800
800
800
800
400
100
100
400
400
200
200
25
25
25
25
W4 Materials
Band:
Stainless Steel
(AISI-301)
Finish:
Black Teflon
or
Stainless steel
b
a
56
Stainless steel
inner-rings for ASFA-S
worm-drive hose clips
W4
Black Finish
Inner Rings for ASFA S clips W4
Information
This inner ring for ASFA-S
worm-drive clip was designed
to give extra protection to the
hose, especially in applications
where changes in the
frequency of vibration can be
an issue. The ring also
contributes to an even
distribution of pressure around
the hose and confers a
constant tension function to
the clip. The black coating
helps to ensure that the rings
adapts correctly to the hose
assembly.
Ø Application
mm
Reference
Black
Reference
Plain
a
+ 0,5
-
16-27
20-32
2540
30-45
32-50
40-60
50-70
60-80
70-90
80-100
90-110
100-120
110-130
120-140
130-150
140-160
150-170
160-180
170-190
180-200
190-210
200-220
210-230
220-240
73031218
73031226
73031234
73031242
73031250
73031269
73031277
73031285
73031293
73031306
73031314
73031322
73031330
73031349
73031357
73031365
73031373
73031381
73031390
73031402
73031410
73031429
73031437
73031445
03031210
03031228
03031236
03031244
03031252
03031260
03031279
03031287
03031295
03031309
03031317
03031325
03031333
03031341
03031350
03031368
03031376
03031384
03031392
03031405
03031413
03031421
03031430
03031448
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
16,5
W4 Materials
Band:
Stainless Steel
(AISI-301)
Finish:
Black Teflon
or
Stainless steel
b
a
57
b
Box
Quantity
Packing
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
100
100
100
100
100
100
100
100
100
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
400
400
400
400
400
400
400
50
50
200
200
200
25
25
25
25
25
25
10
10
10
10
10
10
9mm L-band
Worm-drive Hose clip
W3
DIN: 3017 Light Series black
ASFA L Hose Clip W3 (9mm bandwidth)
Information
Ø Application Reference
mm
Thanks to the exclusive
design of the housing, the
ASFA LW3 hose clip has
excellent performance
while being at the same
time very compact. The
cold-formed stamped
band thread, smoothed
on the underside,
combined with the beveled
band edges protects the
hose from any damage.
The ASFA-L W3 hose clip
complies fully with the DIN
3017 norm and also with
the RoHs directive EU
2002/95/EC dated 1st
July 2006.
The special black finish
gives added corrosion
resistance and makes this
clip very popular in
automotive and defense
applications, as well as in
t h e m a n u f a c t u re o f
agricultural machinery.
8-16
12-22
16-27
20-32
25-40
30-45
32-50
40-60
50-70
60-80
73016011
73016020
73016038
73016046
73016062
73016070
73016089
73016095
73016100
73016118
L
max.
s + 0,1
0
h
max.
a +- 0,3
0,2
b
Max.
22,1
22,1
23,6
23,6
25,6
25,6
25,6
25,6
26,6
26,6
0,6
0,6
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
10
10
10
10
10
10
10
10
10
10
9
9
9
9
9
9
9
9
9
9
14
14
14
14
14
14
14
14
14
14
Max. Values* Max. Values*
Box
Torque Nm
Pressure (Bars) Quantity
3,0
3,0
3,5
3,5
4,0
4,0
4,0
4,0
4,0
4,0
45
45
42
36
32
28
24
19
17
15
Packing
800
800
800
800
800
800
800
400
100
100
200
200
200
200
100
100
100
100
100
100
* The maximum application
pressure can vary
depending on the type of
hose used and the
geometry of the coupling.
Patented Worldwide.
b
W3 Materials
Screw:
(AISI-430)
Stainless steel
L
Band and housing:
Stainless steel X6Cr-17
(DIN 1.4016) AISI 430
Ø
h
Finish:
Black
S
a
58
12mm S-band
Worm-drive Hose clip
W3
DIN: 3017 Heavy Series black
ASFA-S W3 Hose Clip (12mm bandwidth)
Information
Ø Application Reference
mm
Thanks to the exclusive
design of the housing, the
ASFA SW3 hose clip has
excellent performance while
being at the same time very
compact. The cold-formed
stamped band thread,
smoothed on the
underside, combined with
the beveled band edges
protects the hose from any
damage.
The ASFA-S W3 hose clip
complies fully with the DIN
3017 norm and also with
the RoHs directive EU
2002/95/EC dated 1st July
2006.
The special black finish
gives added corrosion
resistance and makes this
clip very popular in
automotive and defense
applications, as well as in
the manufacture of
agricultural machinery.
16-27
20-32
25-40
30-45
32-50
40-60
50-70
60-80
73016206
73016214
73016222
73016230
73016249
73016257
73016265
73016273
L
max.
s + 0,1
0
h
max.
a +- 0,3
0,2
b
Max.
29,6
29,6
29,6
29,6
29,6
29,6
31,6
31,6
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
11
11
11
11
11
11
11
11
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
18
18
18
18
18
18
18
18
Max. Values* Max. Values*
Box
Torque Nm Pressure (Bars) Quantity
4,2
5,2
5,2
5,2
6,0
6,0
6,8
6,8
45
45
40
35
35
30
25
20
50
50
50
50
50
50
50
50
Packing
400
400
400
400
400
400
400
50
* The maximum application
pressure can vary depending
on the type of hose used and
the geometry of the coupling.
Patented Worldwide.
MADE IN SPAIN
b
W3 Materials
Screw:
(AISI-430) Stainless steel
L
Band and housing:
Stainless steel X6Cr-17
(DIN 1.4016) AISI 430
Ø
Finish:
Black
h
S
a
59
S-band Constant
tension worm-drive clip
W3
DIN: 3017 heavy series
ASFA-S W3 Constant tension worm-drive Hose Clip (12mm bandwidth)
Información
The main difference between
the W3 constant tension
worm-drive and the standard
Mikalor worm-drive is to be
found in the inner-ring insert
incorporating a spring. This
spring-loaded insert
maintains constant pressure
around the hose in case of
sudden variations in
temperature and /or vibration
thereby avoiding leaks.
The fact that this clamp
guarantees leak-proof hose
assemblies with both
gaseous fluid and liquids
makes it ideal for
applications in car, tractor or
heavy machinery engines.
M o r e o v e r, t h e n o n perforated cold formed band
together with the rounded
band edges make sure that
no damage occurs to the
hose. This clip complies fully
with the DIN 3017 norm and
also with the RoHs directive
EU/2002/95/EC dated 1st
July 2006.
* The maximum application pressure
can vary depending on the type of
hose used and the geometry of the
coupling.
Ø Nominal
mm
Reference
L
s + 0,1
h
Ø
a +- 0,3
W3
0
max.
0,2
Application max.
16-27
20-32
25-40
30-45
32-50
40-60
50-70
60-80
70-90
80-100
90-110
100-120
110-130
03017800
03017818
03017826
03017834
03017842
03017850
03017869
03017877
03017885
03017893
03017906
03017914
03017922
13-23
17-28
22-36
27-41
29-46
37-56
47-66
57-76
67-86
77-96
87-106
97-116
107-126
29,6
29,6
29,6
29,6
29,6
29,6
31,6
31,6
31,6
31,6
31,6
31,6
31,6
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
11
11
11
11
11
11
11
11
11
11
11
11
11
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
b
Max. Values* Max. Values*
Box
max.
Torque Nm Pressure (Bars) Quantity
18
18
18
18
18
18
18
18
18
18
18
18
18
4,5
5,5
5,5
5,5
6,3
6,3
7,0
7,0
7,0
7,0
7,0
7,0
7,0
47
47
42
37
37
32
27
22
18
15
13
11
9
200
200
100
100
100
100
100
100
50
50
25
25
25
* The bandwidth does not take into account the spring-loaded insert.
* This can also be manufactured in 9mm L-band.
MADE IN SPAIN
b
L
W3 Materials
Screw:
(AISI-430)
Stainless steel
Ø
Band and Housing:
X6Cr-17Stainless steel
(DIN 1.4016) (AISI 430)
Spring-loaded insert:
(AISI-301)
Stainless steel
h
S
a
60
Supra CT Constant
Tension Heavy-Duty Hose
Clamp Stainless steel
W2
High Pressure series
Supra CT W2 Stainless Steel
Information
The Supra CT clamp
incorporates a series of AISI304 Stainless steel spring
washers to the outstanding
Supra W2 clamp. This
specialized version of the Supra
W2 is used in applications
subject to vibration and/or great
variations in temperature and
which cause the components
of a hose assembly to expand
and contract. Thanks to the
spring washer system, the
Supra CT maintains constant
pressure around the hose and
prevents leakage. The beveled
edges protect the hose from
damage. The Supra CT clamp
complies fully with the RoHs
directive EU 20032/95/EC
dated 1st July 2006.
This clamp is generally fitted in
high-powered diesel engines
in heavy machinery, trucks,
buses, marine engines and
diesel-powered generators as
well as in various other industrial
applications where expansion
and contraction cause
assemblies using standard
clamps to leak.
*The maximum application pressure
can vary depending on the type of
hose used and the geometry of the
coupling.
Patented Worldwide
Ø Application
mm
Reference
W2
r
e
a
b
Max. Values*
Torque (Nm)
Max. Values*
Pressure (Bars)
Box
Quantity
Packing
17-19
19-21
21-23
23-25
25-27
27-29
29-31
31-34
34-37
37-40
40-43
43-47
47-51
51-55
55-59
59-63
63-68
68-73
73-79
79-85
85-91
91-97
97-104
104-112
112-121
121-130
130-140
140-150
150-162
162-174
174-187
187-200
200-213
213-226
226-239
239-252
03020100
03020118
03020126
03020134
03020142
03020150
03020169
03020177
03020185
03020193
03020206
03020214
03020222
03020230
03020249
03020257
03020265
03020273
03020281
03020290
03020302
03020310
03020329
03020337
03020345
03020353
03020361
03020370
03020388
03020396
03020409
03020417
03020425
03020433
03020441
03020450
M6
M6
M6
M6
M6
M6
M7
M7
M7
M7
M7
M7
M7
M7
M7
M7
M7
M8
M8
M8
M8
M8
M8
M8
M8
M8
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
10
10
10
10
10
10
11
11
11
11
11
11
11
11
11
11
11
13
13
13
13
13
13
13
13
13
17
17
17
17
17
17
17
17
17
17
18 +0,2
18 +0,2
18 +0,2
18 +0,2
18 +0,2
18 +0,2
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
19,8
19,8
19,8
19,8
19,8
19,8
22,0
22,0
22,0
22,0
22,0
22,0
22,0
22,0
22,0
22,0
22,0
27,5
27,5
27,5
27,5
27,5
27,5
27,5
27,5
27,5
31,0
31,0
31,0
31,0
31,0
31,0
31,0
31,0
31,0
31,0
4,5
4,5
4,5
4,5
4,5
4,5
8,0
8,0
8,0
8,0
8,0
10,0
10,0
10,0
10,0
10,0
10,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
50,0
50,0
50,0
50,0
50,0
50,0
50,0
50,0
50,0
50,0
50
50
48
48
45
45
42
42
40
40
38
38
36
36
34
34
34
28
28
28
20
20
20
12
12
12
9
9
9
6
6
6
3
3
3
3
50
50
50
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
400
400
400
400
400
200
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
b
W2 Materials
e
Band and Bridge:
X6Cr17 Stainless steel
(DIN 1.4016) (AISI-430)
Sreew:
8.8 grade steel
Silver-white Cr3 Zinc-Plated
r
8.8
Ød
SECTION A-A
43-47
Pat.
Washers and Trunions:
AISI 304 Stainless steel
a
61
Technical
Information
G
H
B
ASFA TI Titanium S-band worm-drive hose clip
A
F
E
A
Manufactured in 100% Titanium, this clamp offers the greatest
resistance to pressure and corrosion of any equivalent clamp on
the market, as well as being the lightest of its kind.
B
The screw is also manufactured in Titanium and can take a great
deal of torque.
C
Smooth band underside which avoids damage to the hose.
D
Beveled band edges to avoid the clip cutting into the hose.
E
Cold formed stamped band thread which gives a very good grip
due to the fact that the thread is deeper than the thickness of the
material used.
D
C
F
The exclusive design of the housing keeps the screw in firm contact
with the band and means that the ASFA-TI gives great performance.
G
The compact housing grips the screw preventing lateral movement
during tightening.
H
All ASFA TI hose clips are marked with the application range,
material, the Mikalor logo and the country of manufacture.
Polar Diagram
S-1
Sectors
4 Nm
5 Nm
S2
S1
S3
S4
S5
S6
S7
S8 Average
90,0 71,0 93,0 86,0 77,0 76,0 71,3 101,0 81,4
113,0 97,6 123,0 113,6 103,6 102,2 101,4 137,0 109,2
S-2
S-8
140
Torque / Efficiency [ Nm / daN ]
,0
70,
0
0
S-3
S-7
S-4
S-6
B
S-5
C
Heavy-duty spring-band clip DIN 3021
D
A
The design of this clamp means that it can maintain the same
radial force despite changes in temperature and/or pressure.
B
Safety feature to avoid excessive pressure when mounting which
could damage the clamp.
C
Quick and easy to mount.
D
Quick and easy to mount.
E
Materials free of toxic substances in accordance with current
environmental legislation.
E
S-8
S-2
S-1
A
6,0
3,0
0
Polar Diagram
Sectors
S1
S2
S3
S4
S5
S6
S7
S8 Average
Force Kg
2,3
2,9
3,6
1,5
4,2
2,6
2,2
6,0
S-3
S-7
3,1
S-6
S-4
Torque / Efficiency [ Nm / daN ]
S-5
62
Technical
Information
H
A
F
C
Supra CT Constant Tension Heavy-duty hose clamp
A
The Supra CT incorporates a series of stainless steel spring washers
which allow the clamp to maintain constant pressure around the
hose despite extreme variations of temperature and pressure.
B
The welding spots at both band ends guarantee a perfect bond
meaning that Supra gives excellent response in applications which
require very high torque.
C
High resistance bolt designed to take a lot of torque.
D
Swiveling bridge makes it easy to mount and dismount Supra.
E
Beveled band edges protect the hose from damage.
F
The revolutionary design makes it impossible to dislodge the nut
and trunions.
G
Flexible material allows Supra to adapt to the application zone,
thereby guaranteeing a leak-proof assembly.
H
Manual or automatic assembly.
I
All Supra Clamps are marked with the application range, material
and the Mikalor logo.
D
B
I
G
E
G
F
E
S-band Constant tension worm-drive clip
A
The spring-loaded insert maintains constant pressure around the
hose in case of sudden variations in temperature and /or pressure
thereby avoiding leaks.
B
Smooth band underside which avoids damage to the hose.
C
Beveled band edges to avoid the clip cutting into the hose.
D
Cold formed stamped band thread which gives a very good grip
due to the fact that the thread is deeper than the thickness of the
material used.
E
The screw was designed to take a lot of punishment and can be
tightened using a variety of different tools.
F
The exclusive design of the housing keeps the screw in firm contact
with the band and means that the ASFA-L gives great performance.
G
The compact housing grips the screw preventing lateral movement
during tightening.
H
All Mikalor hose clips are marked with the application range,
material, the Mikalor logo and the country of manufacture in
compliance with DIN 3017.
I
The spring insert is fixed to the band in such a way that it
automatically adjusts while tightening thus optimizing performance.
H
C
D
B
A
C
Polar Diagram
Sectors
5 Nm
6 Nm
S1
S2
S3
S4
S5
S6
S7
S8 Average
95,0 83,0 87,4 102,0 75,0 76,2 70,0 107,0 87,0
112,0 98,2 106,0 116,0 93,6 95,4 89,0 123,0 101,8
S-1
S-8
Torque / Efficiency [ Nm / daN ]
120
S-2
,0
60,
0
0
S-3
S-7
S-4
S-6
63
S-5
Assortment
Boxes and
Display Units
Worm-Drive Hose Clip
Assortment Boxes
DIN 3017
Contents
Reference
Information
With the aim of providing you
with the hose clip which most
adequately suits your needs,
we have developed a wide
range of hose clip assortment
boxes.
The different diameters of clip
are arranged in individual
compartments, making it easy
to find the appropriate size.
The sturdy plastic case is also
very convenient for transporting
the product.
All assortment boxes include a
flexible hex-socket screwdriver
which can be used to torque
up Mikalor worm-drive clips in
all sorts of application zones.
03503010
03503028
03503044
03503060
03503087
03503095
03503108
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø Flexi Series Material
8-16 12-22 16-27 20-32 25-40 30-45 32-50 40-60 50-70 60-80 70-90 driver
Quality
Pcs Pcs Pcs Pcs Pcs Pcs Pcs
Pcs
Pcs
Pcs
Pcs
60
60
60
60
-
40
40
40
40
-
40
40
40
40
25
25
25
20
20
20
20
20
20
20
20
20
20
20
12
12
12
20
20
20
20
-
10
10
10
10
8
8
8
10
10
10
10
6
6
6
6
6
6
6
6
6
6
5
5
5
5
5
5
1
1
1
1
1
1
1
LIGHT
LIGHT
LIGHT
LIGHT
HEAVY
HEAVY
HEAVY
W1
W2
W4
W5
W1
W2
W4
Materials
Case:
Yellow PVC
27 cm.
38 cm.
Insert:
High impact red
polypropylene
8 cm.
66
Worm-Drive
Hose Clip Display Units
DIN 3017
Contents
Reference
Ø
Ø
8-16 12-22
Pcs
Pcs
02500191
02500079
02500087
02500140
02500167
02500183
200
200
200
-
Information
Our range of wall-displays is
one of the most complete on
the market, meaning that you
can choose the one which most
suits your needs and the space
at your disposal.
The design of these easy to use
wall displays, which are both
attractive and well-organized,
makes them an ideal sales tool.
200
200
200
-
Ø
16-27
Pcs
Ø
20-32
Pcs
Ø
25-40
Pcs
Ø
32-50
Pcs
Ø
40-60
Pcs
Ø
50-70
Pcs
Ø
70-90
Pcs
Series
Material
Quality
200
200
200
-
200
200
200
50
50
50
100
100
100
50
50
50
100
100
100
50
50
50
100
100
100
50
50
50
100
100
100
50
50
50
50
50
50
LIGHT
LIGHT
LIGHT
HEAVY
HEAVY
HEAVY
W1
W2
W4
W1
W2
W4
Materials
92 cm.
38 cm.
Display:
High resistance
PS plastic
Color:
Yellow
10 cm.
67
Frontal Ear Clip pliers
Frontal ear clip pliers
Information
These pliers can be used to fasten all types of
ear clip. The Frontal model is fast and easy to
use and can be used in the majority of cases.
It is also known as the “Russian” model
Article
Reference
Frontal ear clip pliers
Box
Quantity
Packing
Frontal Ear
Clip pliers
03011088
1
1
Lateral Ear Clip Pliers
Frontal and lateral ear clip pliers
Information
This lateral model was designed to be used in
application zones which are difficult to access. It
can be used both frontally and laterally.
Article
Reference
Lateral Ear clip pliers
Box
Quantity
Packing
Frontal and lateral
ear clip pliers
03011096
1
1
Pliers for DIN 3021 Heavyduty Spring band Clip
Pliers for heavy-duty spring-band clips
Información
Pliers for DIN 3021 heavy-duty spring-band clips.
These pliers were specially designed to grip the
DIN 3021 clip firmly during assembly.
Article
Reference
Spring-band pliers
Box
Quantity
Packing
Pliers for heavy-duty
spring-band clips
03031499
1
1
68
Pliers for Clip clamp
Frontal pliers for Clip clamp
Information
Pliers for the complete Clip clamp range.
Article
Reference
Clip clamp pliers
Box
Quantity
Packing
Frontal pliers
for Clip clamp
03030390
1
1
Application tool
for preformed clamps
Application tool for preformed clamps
Information
Application tool for preformed clamps. This tool
is very easy to use. It incorporates a function which
regulates tension in the band and cuts the band
end automatically.
Article
Reference
Preformed clamp application tool
Box
Quantity
Packing
Application tool for
preformed clamps
03002015
1
1
Pneumatic pliers
for Clip clamp
Pneumatic pliers for Clip clamp
Information
Pneumatic pliers for use with the complete range
of Clip clamps. Ideal for use on assembly lines.
Working pressure: 5 bars. Total weight : 650grs
Article
Reference
Pneumatic pliers for Clip clamp
Box
Quantity
Packing
Pneumatic pliers
for Clip clamp
03030402
1
1
69
D.L.: B-?-?
MuchMuch
more
than
just
clamps
more than just clamps
Garraf, 10-12 · Pol. Ind. Pla de la Bruguera
08211 CASTELLAR DEL VALLÈS (Barcelona) Spain
Tel. (00-34) 937 299 611 - Fax (00-34) 937 142 425
damesa@damesa.es - www.damesa.es
www.mikalor.com

Similar documents

Bolt Clamps W1 - HCD Flow Technology

Bolt Clamps W1 - HCD Flow Technology nut and T-bolt mean that Super can be tightened up hard using many different kinds of tool, while the beveled edges protect the hose from harm. The Super clamp is in its element in agricultural app...

More information