9mm L-band Worm-drive Hose clip W1

Transcription

9mm L-band Worm-drive Hose clip W1
Low Pressure
One Ear Clip W1-W4
Two Ear Clip W1-W4
6-8
7-9
One Ear Clip with Inner Ring W1-W4
10 - 11
P-Clips W1-W4
12-13
Spring Clip W1
14
Wire Clip W1
15
"Normal" mini-clip W1
16
Open worm-drive W2
17
Preformed clamp W4
20
Endless Band and Housing W4
21
Medium Pressure
ASFA-L W1 worm-drive clip
22
ASFA-L W2 worm-drive clip
23
ASFA-L W4 worm-drive clip
24
ASFA-L W5 worm-drive clip
25
ASFA-S W1 worm-drive clip
26
ASFA-S W2 worm-drive clip
27
ASFA-S W4 worm-drive clip
28
ASFA-S W5 worm-drive clip
29
High Pressure
Super W1 Heavy-Duty Clamp
32
Supra W2 Heavy-Duty Clamp
33
Supra W4 Heavy-Duty Clamp
34
Supra W2 CT Heavy-Duty Clamp
35
Special Clamps
Double Bridge Clamp (for spiral hose) W4
38
Titanium Clamp Titanium
39
Assortment Boxes and Display Units
Hose Clip Assortments
42
Display Units
43
* This catalogue is the property of The Mikalor Group. Any partial or total reproduction of any or all of the contents is strictly forbidden, unless written authorization is given by the Mikalor Group or any of the
companies which form part of it. Failure to comply with this will lead to prosecution
* Due to continuing technical advances and the evolution of materials used in the manufacture of the products in this catalogue, Mikalor reserves the right to carry out dimensional, structural or other modifications
without giving prior notice, with the aim of supplying a better and more efficient product.
* This catalogue is for commercial use. The details contained herein do not constitute a contract in any way.
1
Mikalor, S.A.
Mikalor was founded in 1943 and has grown constantly ever since. Nowadays The
Mikalor Group is made up of six companies, including Mikalor S.A.
Damesa is responsible for the distribution and commercialization of the products
manufactured by the other companies in the group.
The main manufacturing unit, where our range of hose clips and clamps is
manufactured, is located in the city of Sabadell, 25 km from Barcelona. Our state
of the art manufacturing processes produce the best range of clips and clamps on
the market.
The use of high-tech manufacturing processes has given Mikalor an important
presence in international markets in automotive, white goods and general industrial
applications.
Mikalor Products
Our aim is to fulfill the highest expectations of industrial clients offering the widest
possible range of solutions, working at all times to maintain and improve our
competitive position in the market. Environmental concerns are forefront in our
minds at all stages of the manufacturing process.
Mikalor is the only company in the world at this time to have launched a range of
100% Titanium worm-drive hose clips, designed to meet the needs of the most
demanding of industrial applications.
Our R&D department has also pioneered products such as the famous SUPER
heavy-duty hose clamp, the benchmark by which all other heavy-duty clamps are
judged.
Mikalor Technology
We are proud to put our technological capacity at the service of clients, working
together to design solutions for their clamping needs.
One of the main factors which makes Mikalor stand out from the rest is the
implication of our R&D department in the development of new products in response
to the demands of the market,.
Development projects are coordinated from the beginning to the end of the life
of a product as solutions are trialed and tested during all phases of product design,
development, CAE, prototypes, and the manufacture of tooling.
We use our engineering know-how in the quest for improvement, until we find
the solution to each particular application.
The majority of the products in the Mikalor range are patented worldwide.
2
Our Committment
We undertake to promote a company culture based on the full satisfaction of our
clients’ expectations.
In order to fulfill our commitment, Mikalor invests continuously in technology and
human resources, in order to ensure the continuous quality of our products and
processes.
All the different processes involved in the manufacture of Mikalor products are
carried out by companies belonging to The Mikalor Group. Rather than outsourcing
manufacturing processes, we prefer to have full control of the entire process,
starting with the design of the product right up to the moment it is delivered to our
client.
This commitment means we can guarantee top quality products which have been
manufactured in optimum conditions.
The future of Mikalor
With regard to the future, here at Mikalor we have one clear aim in mind.
Mikalor and the rest of the companies in the Mikalor group are working and will
continue to work tirelessly to rise to the challenges which lie ahead.
This dedication to the pursuit of excellence, which has been a constant factor in
our activities since the Group was founded, has lead to the supreme quality of our
product range and the unparalleled worldwide reputation of the Mikalor brand.
Material Specification Chart according
to international norms
W1
W2
W3
DIN
AISI
EN
AFNOR
UNI
(Germany)
(USA)
(EU)
(France)
(Italy)
1.0213
Qst-3 Steel White Zinc-Plated Cr3
1.0935
Zinc-plated steel Cr3
1.0213
Qst-3 Steel White Zinc-Plated Cr3
1.4016
430
X6Cr17
1.4016
430
X6Cr17
Z8C 17
X8Cr 17
430 S 17
W4
1.4031
304
X5CrNi1810
Z7CN 18-09
X5 CrNi1810
304 S 16
304 S 31
W5
1.4571
X6CrNiMoTi17122
Z6CNDT 17-12
X6 CrNiMo Ti17 12
320 S 31
(1.4401)
316
3
(X5CrNiMo17122) (Z7 CDN 17-12-02)
(X5 CrNiMo 17 12)
Low Pressure
One-ear clip W1
One Ear Clip W1 - A10R W1
Information
The use of One-ear clips is an
economical solution for many
simple hose assemblies, as they
can be used with air or other
fluids. The practical design of
ear clips means that they are
tamper-proof once mounted.
The edges are rounded to avoid
damage to the hose.
One-ear clips are easy, fast and
safe to mount.
Ø Application
min. max.
7
8
9
10
11
12
14
16
9
10
11
12
13
14
16
18
Reference
W1
A
B
C
D
E
Box
Quantity
Packing
Colour
03012080
03012072
03012013
03012021
03012030
03012048
03012056
03012064
9,3
10,3
11,3
12,3
13,3
14,3
16,3
18,5
5,5
6,0
6,5
7,0
7,5
8,0
8,5
9,5
6,0
6,0
6,5
6,5
6,5
7,0
7,0
7,0
13,0
14,0
15,0
16,0
17,0
18,5
20,5
23,0
0,8
0,8
0,8
0,8
0,9
1,0
1,1
1,2
1000
1000
1000
500
500
500
500
500
8000
8000
8000
8000
8000
4000
4000
4000
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
ØA
Materials W1
C
B
Band:
St 34 steel (DIN 2393 C)
Finish:
Silver-white Cr3 Zinc-Plated
E
D
6
Two-ear clip W1
Two-ear Clip W1 - A20R W1
Information
The use of Two-ear clips is an
economical solution for many
simple hose assemblies, used
with air or other fluids. The two
ears give the clip extra grip and
help to maintain constant
pressure around the hose. Fitting
is more flexible and exact. The
practical design of Two-ear clips
means that they clamp firmly on
to the assembly and are tamperproof once mounted. The edges
are rounded to avoid damage to
the hose
Two-ear clips offer great versatility
in simple hose assemblies.
Ø Application
min. max.
5
7
9
10
11
13
14
15
17
18
20
22
23
25
28
31
34
37
40
43
7
9
11
12
13
15
17
18
20
21
23
25
27
28
31
34
37
40
43
46
Reference
W1
A
B
C
D
E
Box
Quantity
Packing
Colour
03012101
03012110
03012128
03012099
03012136
03012144
03012152
03012160
03012179
03012187
03012195
03012208
03012216
03012224
03012232
03012240
03012259
03012267
03012275
03012283
7,3
9,3
11,3
12,3
13,3
15,3
17,5
18,5
20,5
21,5
23,5
25,5
27,5
28,5
31,5
34,5
37,5
40,5
43,5
46,5
4,3
4,8
5,3
5,5
5,8
6,3
6,6
7,0
7,6
7,9
8,5
9,1
9,4
10,0
10,6
11,0
11,5
12,0
12,5
13,0
6,0
6,0
6,5
6,5
6,5
7,0
7,0
7,5
7,5
8,0
8,0
8,5
8,5
9,0
9,0
9,5
9,5
10,0
10,0
10,5
11,0
13,5
17,0
18,0
19,0
21,5
24,0
25,0
27,0
28,0
31,0
33,0
35,0
36,0
39,0
42,0
46,0
49,0
53,0
56,0
0,6
0,8
0,8
0,9
0,9
1,0
1,2
1,2
1,2
1,2
1,3
1,4
1,4
1,4
1,4
1,4
1,6
1,6
1,6
1,6
2000
1000
1000
1000
500
500
500
500
250
250
250
200
200
200
100
100
100
100
75
75
16000
16000
8000
8000
8000
4000
4000
500
2000
2000
2000
1600
1600
200
800
800
800
100
600
75
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
ØA
C
Materials W1
B
Band:
St 34 steel (DIN 2393 C)
Finish:
Silver-white Cr3 Zinc-Plated
E
D
7
Stainless-steel
One-ear clip W4
AISI-304 Stainless steel (A2)
One-ear Clip W4 - A10R INOX W4
Information
The use of One-ear clips is an
economical solution for many
simple hose assemblies, used
with air or other fluids. Due to
the AISI-304 steel used in the
manufacture of these clips, their
corrosion resistance is
outstanding.
They are recommended
especially in outdoor
applications. Like all ear clips,
once mounted they are tamperproof.
Ø Application
min. max.
7
8
9
10
11
12
13
14
15
16
17
18
9
10
11
12
13
14
15
16
17
18
19
20
Reference
W4
A
B
C
D
E
Box
Quantity
Packing
Colour
23012440
23012087
23012010
23012028
23012036
23012044
23012079
23012052
23012058
23012060
23012423
23012431
9,3
10,3
11,3
12,3
13,3
14,3
15,3
16,3
17,5
18,5
19,5
20,5
5,5
6,0
6,5
7,0
7,5
8,0
8,0
8,5
9,0
9,0
9,5
10,0
6,0
6,0
6,5
6,5
6,5
7,0
7,0
7,0
7,0
7,0
7,5
7,5
13,0
14,0
15,0
16,0
17,0
18,5
19,5
20,5
22,0
23,0
24,0
25,0
0,8
0,8
0,8
0,8
0,8
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1000
1000
1000
1000
500
500
500
500
500
500
250
250
16000
16000
8000
8000
8000
8000
4000
4000
4000
4000
2000
2000
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
ØA
Materials W4
C
B
Band:
AISI-304
Stainless steel (A2)
Finish:
100% Stainless steel
E
D
8
Stainless-steel
Two-ear clip W4
AISI-304 Stainless steel (A2)
Two-ear Clip W4 - A20R INOX W4
Information
The use of Two-ear clips is an
economical solution for many
simple hose assemblies, used with
air or other fluids. The two ears
give the clip extra grip and help to
maintain constant pressure around
the hose. Fitting is more flexible
and exact. The practical design of
Two-ear clips means that they
clamp firmly on to the assembly
and cannot be removed once
mounted. The edges are rounded
to avoid damage to the hose
Due to the AISI-304 steel used in
the manufacture of these clips,
their corrosion resistance is
outstanding.
They are recommended especially
in outdoor applications.
Ø Application
min. max.
5
7
9
11
13
14
15
17
18
20
22
7
9
11
13
15
17
18
20
21
23
25
Reference
W4
A
B
C
D
E
Box
Quantity
Packing
Colour
23012108
23012116
23012124
23012132
23012140
23012159
23012167
23012175
23012183
23012191
23012204
7,3
9,3
11,3
13,3
15,3
17,5
18,5
20,5
21,5
23,5
25,5
4,3
4,8
5,3
5,8
6,3
6,6
7,0
7,6
7,9
8,5
9,1
6,0
6,0
6,5
6,5
7,0
7,0
7,5
7,5
8,0
8,0
8,5
11,5
14,5
16,5
19,0
21,5
24,0
25,0
27,0
28,5
30,5
33,5
0,6
0,8
0,8
0,8
1,0
1,0
1,0
1,0
1,0
1,0
1,2
2000
1000
1000
500
500
500
500
250
250
250
200
16000
16000
8000
8000
4000
4000
4000
2000
2000
2000
1600
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
ØA
C
Materials W4
B
Band:
AISI-304
Stainless steel (A2)
Finish:
100% Stainless steel
E
D
9
One-ear clip W1
With Stainless steel Inner-Ring
One Ear Clip W1 - A10RB W1
Information
The use of One-ear clips is an
economical solution for many
simple hose assemblies, as they
can be used with air or other
fluids. The inner-ring means that
the clamp fits snugly around the
hose, while the beveled edges
protect the hose from being
pinched during fitting.
The use of One ear clips with
Inner-ring is recommended
when working with delicate
hoses.
Ø Application
min. max.
7,5
8,0
9,0
10,0
10,5
11,5
13,0
15,0
8,5
9,5
10,5
11,5
12,5
13,3
15,3
17,3
Reference
W1
A
B
C
D
E
F
G
Box
Quantity
Packing
Colour
03011009
03011010
03011029
03011037
03011045
03011053
03011061
03011070
9,3
10,3
11,3
12,3
13,3
14,3
16,3
18,5
5,5
6,0
6,5
7,0
7,5
8,0
8,5
9,5
6,0
6,0
6,5
6,5
6,5
7,0
7,0
7,0
13,0
14,0
15,0
16,0
17,0
18,5
20,5
23,0
0,8
0,8
0,8
0,8
0,9
1,0
1,1
1,2
8,5
9,5
10,5
11,5
12,5
13,3
15,3
17,3
7,8
7,8
7,8
7,8
7,8
8,8
8,8
8,8
1000
1000
1000
500
500
500
500
500
8000
8000
8000
8000
8000
4000
4000
4000
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
ØA
Materials W1
C
B
Band:
St 34 steel (DIN 2393 C)
Finish:
Silver-white Cr3 Zinc-Plated
Inner-ring:
AISI-301 Stainless steel
E
D
G
F
10
Stainless steel
One-ear clip W4
With Stainless steel Inner-Ring
One Ear Clip W4 - A10RI W4
Information
The use of One-ear clips is
an economical solution for
many simple hose
assemblies, as they can be
used with air or other fluids.
The inner-ring means that the
clamp fits snugly around the
hose, while the beveled edges
protect the hose from being
pinched during fitting.
Due to the AISI-304 steel
used in the manufacture of
these clips, their corrosion
resistance is outstanding.
These clips are especially
recommended in outdoor and
marine applications.
Ø Application
min. max.
7,5
8,2
9,0
10,0
10,5
11,5
12,5
13,0
14,0
15,0
16,0
17,0
8,5
9,5
10,5
11,5
12,5
13,5
14,5
15,3
16,3
17,3
18,3
19,3
Reference
W4
A
B
C
D
E
F
G
Box
Quantity
23012300
23012319
23012327
23012335
23012343
23012351
23012360
23012378
23012386
23012394
23012407
23012415
9,3
10,3
11,3
12,3
13,3
14,3
15,3
16,3
17,5
18,5
19,5
20,5
5,5
6,0
6,5
7,0
7,5
8,0
8,0
8,5
9,0
9,5
9,5
10,0
6,0
6,0
6,5
6,5
6,5
7,0
7,0
7,0
7,0
7,0
7,5
7,5
13,0
14,0
15,0
16,0
17,0
18,5
19,5
20,5
22,0
23,0
24,0
25,0
0,8
0,8
0,8
0,8
0,8
1,0
1,0
1,0
1,0
1,0
1,0
1,0
8,5
9,5
10,5
11,5
12,5
13,5
14,5
15,3
16,3
17,3
18,3
19,3
7,8
7,8
7,8
7,8
7,8
7,8
8,8
8,8
8,8
8,8
9,8
9,8
2000
1000
1000
1000
500
500
500
500
250
250
250
200
Packing
16000
8000
8000
8000
8000
4000
4000
4000
4000
4000
2000
2000
Colour
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
INOX
ØA
C
Materials W4
B
Band:
AISI-304
Stainless steel (A2)
Finish:
100% Stainless steel
E
D
Inner-ring:
AISI-301
Stainless steel
G
F
11
Rubber-lined P-Clip W1
DIN: 3016
Rubber lined P-Clip W1
Article
Reference
AGD
Bandwidth
a
Diameter
Application
d
Metric
screw
Box
Quantity
Packing
AGD125
AGD126
AGD128
AGD1210
AGD1212
AGD1213
AGD1214
AGD1215
AGD1216
AGD1217
AGD1218
AGD1219
AGD1220
AGD1221
AGD1222
AGD1223
AGD1224
AGD1225
AGD1226
AGD1227
AGD1228
AGD156
AGD158
AGD1510
AGD1512
AGD1513
AGD1514
AGD1515
AGD1516
AGD1517
AGD1518
AGD1519
AGD1520
AGD1521
AGD1522
03003856
03003864
03003880
03003901
03003928
03003936
03003944
03003952
03003960
03003979
03003987
03003995
03004007
03004015
03004023
03004031
03004040
03004058
03004066
03004074
03004082
03004664
03004680
03004701
03004728
03004736
03004744
03004752
03004760
03004779
03004787
03004795
03004808
03004816
03004824
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
15
15
15
15
15
15
15
15
15
15
15
15
15
15
5
6
8
10
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
6
8
10
12
13
14
15
16
17
18
19
20
21
22
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.5
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
200
200
200
200
200
200
200
200
200
200
200
200
200
100
100
100
100
100
100
100
100
200
200
200
200
200
200
200
200
200
200
200
200
100
100
200
200
200
200
200
200
200
200
200
200
200
200
200
100
100
100
100
100
100
100
100
200
200
200
200
200
200
200
200
200
200
200
200
100
100
Information
Rubber-lined P-Clips are
composed of a zincplated steel band lined
with anti-vibration EPDM
rubber, which also
protects hands from
injury during mounting.
Both holes are
reinforced with plates
which ensure a firm grip.
P-Clips are often used
when mounting pipes
and electric cabling in
applications where
vibration can be a
problem.
12
Rubber lined P-Clip W1
Article
Reference
AGD
Bandwidth
a
Diameter
Application
d
Metric
screw
Box
Quantity
Packing
AGD1523
AGD1525
AGD1526
AGD1528
AGD1530
AGD1532
AGD1534
AGD1535
AGD1537
AGD1538
AGD1540
AGD2011
AGD2012
AGD2013
AGD2014
AGD2015
AGD2016
AGD2018
AGD2019
AGD2020
AGD2021
AGD2022
AGD2023
AGD2024
AGD2025
AGD2027
AGD2028
AGD2030
AGD2032
AGD2034
AGD2035
AGD2036
AGD2038
AGD2040
03004832
03004859
03004867
03004883
03004904
03004920
03004947
03004955
03004971
03004980
03005000
03005510
03005528
03005536
03005544
03005552
03005560
03005579
03005587
03005595
03005608
03005616
03005624
03005632
03005640
03005667
03005675
03005691
03005712
03005739
03005747
03005755
03005771
03005798
15
15
15
15
15
15
15
15
15
15
15
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
23
25
26
28
30
32
34
35
37
38
40
11
12
13
14
15
16
18
19
20
21
22
23
24
25
27
28
30
32
34
35
36
38
40
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.6
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
M.8
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
50
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
50
Materials W1
d
Band:
Mild steel reinforced
at both ends
Finish:
Galvanized and lined
with EPDM rubber
* Special dimensions and
material qualities are available
on request.
d
W1
a
13
Spring Clip W1
Spring Clip AML W1
Information
Spring clips are designed
to distribute pressure
uniformly around the
application zone. Their
use is recommended
when the hose is subject
to rapid changes in
temperature which cause
expansion and
contraction of the
materials used in the
assembly. The spring clip
maintains pressure during
this process, thereby
preventing leaks.
Nominal
diameter Ø
Reference
W1
6
7
8
9
10
11
12
14
15
17
20
02014025
02014033
02014041
02014050
02014068
02014076
02014084
02014092
02014105
02014113
02014121
Ø di
5,5
6,4
7,4
8,4
9,3
10,3
11,1
12,9
13,5
15,6
18,4
±0,1
±0,1
±0,15
±0,15
±0,2
±0,2
±0,2
±0,2
±0,2
±0,2
±0,4
b
a
± 0,05
s
Box
Quantity
Packing
7
7
8
8
8
8
8
8
8
8
8
3
3
3
3,5
3,5
4
4
4
4,5
4,5
3,2
0,5
0,5
0,6
0,6
0,7
0,7
0,7
0,8
0,8
0,8
0,8
500
500
500
500
500
500
500
500
500
500
500
8000
8000
8000
4000
4000
4000
4000
4000
4000
4000
4000
Materials W1
s
Band:
Spring steel
a
Finish:
Silver-white
Cr3 Zinc-Plated
b
Ødi
14
Wire Clip W1
Spring Clip AAL W1
Information
Wire clips are a competitivelypriced clamping solution in
certain applications. They are
used in low-pressure
applications and particularly
with small diameter sunken
spiral hoses.
Materials W1
Ø Application
min. max.
7,3
7,8
8,3
8,8
9,3
9,8
10,4
11,0
11,6
12,1
12,9
13,6
14,4
14,8
15,9
16,8
17,7
18,7
19,6
7,8
8,3
8,8
9,3
9,9
10,4
11,0
11,6
12,3
13,1
13,6
14,4
15,1
15,9
16,8
17,7
18,7
19,6
20,6
Reference
W1
r1
r2
h
max.
Øs
Box
Quantity
Packing
02016012
02016020
02016039
02016047
02016055
02016063
02016071
02016080
02016098
02016100
02016119
02016127
02016135
02016143
02016151
02016160
02016178
02016186
02016194
10,7
10,7
11,0
11,0
11,8
13,5
14,8
14,8
16,4
17,2
17,5
18,0
19,6
21,0
22,0
21,3
22,7
23,3
24,0
8,2
8,3
8,6
9,0
9,0
10,5
11,4
11,9
12,4
13,7
14,0
14,5
16,0
16,4
16,6
16,5
17,7
18,0
18,5
5,5
5,5
5,5
5,5
5,5
6,3
6,3
6,3
7,3
7,3
7,3
7,3
8,4
8,4
8,4
8,4
9,9
9,9
9,9
1,0
1,0
1,0
1,0
1,0
1,2
1,2
1,2
1,5
1,5
1,5
1,5
1,8
1,8
1,8
1,8
2,0
2,0
2,0
1000
1000
1000
1000
1000
1000
1000
1000
1000
500
500
500
500
500
500
500
500
500
500
8000
8000
8000
8000
8000
8000
8000
8000
4000
4000
4000
4000
4000
4000
4000
4000
2000
2000
2000
h
r1
Band:
Spring steel
r2
Finish:
Cr3 Zinc-Plated
Ød
Øs
15
“Normal” Mini-clip W1
“Normal” Mini-clip W1
Information
The use of malleable mild
steel in the manufacture
of the “Normal” mini-clip
means that when
tightened, the clip adapts
perfectly to the hose,
clamping firmly but
gently. This clip is
recommended for use
with gaseous fluids at low
pressure.
“Normal” also has many
applications in the
automotive industry.
* The maximum pressure may
vary depending on the type of
hose and coupling used
d Ø Application
mm
Reference
W1
r
6
8
9
9,5-10
10-11
12-13
13-14
14-15
15-17
16-18
18-20
19-21
20-22
22-25
23-26
25-28
26-29
29-32
03010510
03010528
03010536
03010544
03010552
03010560
03010579
03010587
03010595
03010608
03010616
03010624
03010632
03010640
03010659
03010667
03010675
03010683
M3
M3
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
M4
e
a
b
s
Max. values*
Torque Nm
Max. values*
Pressure (Bars)
Box
Quantity
Packing
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8,4
9
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
9
9
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,4
0,4
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
15,0
14,0
15,0
14,0
13,0
12,5
12,5
12,0
12,0
11,5
10,5
10,5
10,5
9,5
9,0
8,5
8,5
8,0
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1600
1600
1600
1600
1600
1600
1600
1600
1600
1600
1600
800
800
800
800
800
800
800
min. 2 threads
e
Materials W1
r
Screw:
6.6 strength
Grey-white Cr3 zinc-plated
Nut:
6 strength
White Cr3 zinc-plated
Band:
St 02Z (DIN 1.0226)
b
Ød
s
a
9±0.1
16
min. Ø 8
Open worm-drive
clip W2
Open Light series
Open worm-drive clip W2
Information
The reduced dimensions of
the housing of this clip make
it the ideal choice for
applications where space is
limited. It is especially
recommended for clamping
small bore thin-walled hoses.
Ø Application
mm
Reference
W2
a
b
c
d
7-11
11-19
03016401
03016410
7,5
7,5
0,4
0,4
7
7
5
5
Max. values
Max. values
Box
Torque Nm Pressure (Bars) Quantity
1,5
1,5
35
35
100
100
* The maximum pressure may vary
depending on the type of hose and
coupling used.
Materials W2
Screw and housing:
Qst 34-3 Mild Steel
(DIN 1.0213)
Grey-white Cr3 zinc-plated
Band:
Stainless steel X8CR 17
(DIN 1.4016)
(AISI-430)
c
d
a
b
17
Packing
1600
1600
Medium
Pressure
Stainless steel
Preformed Clamp W4
Stainless steel AISI-304
Stainless Steel Preformed Clamp W4
Information
The housing of the
preformed clamp
incorporates a stainless
steel ball-bearing making
it extremely tough once
fastened. Due to its
design, the preformed
clamp is tamper-proof
once it has been
mounted. Two different
bandwidths are available,
meaning that you can
clamp up to 114kg, and
in applications up to
300mm in diameter.
Ø Application
mm
4,50
4,50
4,50
4,50
4,50
4,50
4,50
7,94
7,94
7,94
7,94
7,94
7,94
7,94
x
x
x
x
x
x
x
x
x
x
x
x
x
x
33
50
76
102
156
207
245
50
76
102
135
150
207
312
Reference
W4
Width
Maximum
diameter
Length
Strength
(Kg)
Box
Quantity
Packing
03002001
03002002
03002003
03002004
03002005
03002006
03002007
03002008
03002009
03002010
03002011
03002012
03002013
03002014
4,50
4,50
4,50
4,50
4,50
4,50
4,50
7,94
7,94
7,94
7,94
7,94
7,94
7,94
33
50
76
102
156
207
245
50
76
102
135
150
207
312
130
200
300
370
520
680
840
200
300
370
450
500
680
1020
46
46
46
46
46
46
46
114
114
114
114
114
114
114
100
100
100
100
100
100
100
100
100
100
100
100
100
100
8000
6000
5000
4500
100
100
100
4500
4000
3000
2000
2500
100
100
Materials W4
Band:
AISI-304
Stainless steel (A2)
Ball:
AISI-304
Stainless steel (A2)
Application Tool
for Preformed Clamps
Application Tool for Preformed Clamps
Article
Reference
AM-AFM
Box
Quantity
Packing
Application Tool for
Preformed Clamps
03002015
1
1
20
Endless worm-drive
band and housing W4
Stainless steel AISI-304
Endless worm-drive Band and separate housing W4
Description
Article
CT/CP/CC
Reference
Bandwidth
(mm)
a
Minimum
band thickness
b
Packing
Material
Stamped Band
Stamped Band
Housing (A)
CT 7-25
CT 7-2
CCT 7
03011109
03011117
03011125
7
7
-
0,6
0,6
-
25 mts
2 mts
100 pcs
AISI-304 Stainless steel
AISI-304 Stainless steel
AISI-302 Cu Stainless steel
Stamped Band
Stamped Band
Housing (A)
CT 11-30
CT 11-3
CCT 11-A
03011168
03011176
03011184
11
11
-
0,6
0,6
-
30 mts
3 mts
100 pcs
AISI-304 Stainless steel
AISI-304 Stainless steel
AISI-302 Cu Stainless steel
Perforated Band
Perforated Band
CP 14-30
CP 14-5
CCP 14-10
CCP 14-50
03012961
03011192
03011205
03012970
14
14
-
0,6
0,6
-
30 mts
5 mts
10 pcs
50 pcs
AISI-304 Stainless steel
AISI-304 Stainless steel
AISI-302 Cu Stainless steel
AISI-302 Cu Stainless steel
Information
Endless banding with
comes in rolls which are
between 2m to 30m
long, allowing you to
clamp just about any
assembly without
knowing the diameter in
advance. The housings
are supplied separately
and can be fitted easily
where and when they
are needed. With an
endless band and a box
of buckles you can cover
just about any
eventuality. Ideally suited
for the client with
temporary or occasional
clamping needs.
Housing (B)
Housing (B)
Materials W4
b
Band:
AISI-304
Stainless steel (A2)
Housing:
AISI-3025
(Cu Stainless steel)
a
21
9mm L-band Worm-drive
Hose clip W1
DIN: 3017 Light series
Asfa-L W1 Hose Clip
Information
Thanks to the exclusive
design of the housing, the
ASFA-L W1 hose clip has
excellent performance while
being at the same time very
compact. The cold-formed
stamped band thread,
smoothed on the
underside, combined with
beveled band-edges,
protects the hose from
damage.
The ASFA-L W1 hose clip
complies fully with the DIN
3017 norm and also with
the RoHs directive EU
20032/95/EC dated 1st
July 2006.
This clip is ideal for general
industrial applications.
Ø Application Reference
mm
W1
8-16
12-22
16-27
20-32
25-40
30-45
32-50
40-60
50-70
60-80
70-90
80-100
90-110
100-120
110-130
120-140
130-150
140-166
03008753
03008761
03008770
03008788
03008796
03008809
03008817
03008825
03008833
03008841
03008850
03008868
03008876
03008884
03008892
03008905
03008913
03008921
L
s + 0,1
h
a +- 0,3
max.
0
max.
0,2
22,1
23,6
23,6
23,6
25,6
25,6
25,6
25,6
26,6
26,6
26,6
26,6
26,6
26,6
26,6
26,6
26,6
26,6
0,6
0,6
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
b
max.
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
(9 mm bandwidth)
Max. Values* Max. Values*
Box
Torque Nm Pressure (Bars) Quantity
3,0
3,0
3,5
3,5
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
45
45
42
36
32
28
24
19
17
15
13
11
10
9
8
7
6
5
Packing
200
200
200
200
100
100
100
100
100
100
50
50
25
25
25
25
25
25
800
800
800
800
800
800
800
400
100
100
400
400
200
200
25
25
25
25
*The maximum application pressure
can vary depending on the type of
hose used and the geometry of the
coupling.
Patented Worldwide
Materials W1
b
MADE IN SPAIN
Screw:
Qst 36-3 Mild steel
(DIN 1.0213)
Silver-white Cr3 Zinc-Plated
MADE IN SPAIN
Band and Housing:
Galvanized steel
S/EN 10292
(DIN 1.0935)
Ø
L
MADE IN SPAIN
h
S
a
22
9mm L-band Worm-drive
Hose clip W2
DIN: 3017 Light series
Asfa-L W2 Hose Clip (9 mm bandwidth)
Information
Thanks to the exclusive
design of the housing, the
ASFA-L W2 hose clip has
excellent performance while
being at the same time very
compact. The cold-formed
stamped band thread,
smoothed on the underside,
combined with beveled
band-edges protects the
hose from damage. The
AISI-430 Stainless steel
finish of the band and
housing make this a very
attractive clip.
The ASFA-L W2 hose clip
complies fully with the DIN
3017 norm and also with
the RoHs directive EU
20032/95/EC dated 1st July
2006.
This clip is very popular in
the hardware and domestic
markets and in automotive
applications.
*The maximum application pressure
can vary depending on the type of
hose used and the geometry of the
coupling.
Patented Worldwid
Ø Application Reference
mm
W2
8-12
8-16
12-22
16-27
20-32
25-40
30-45
32-50
40-60
50-70
60-80
70-90
80-100
90-110
100-120
110-130
120-140
130-150
140-160
03016508
03016516
03016524
03016532
03016540
03016559
03016567
03016575
03016583
03016591
03016604
03016612
03016620
03016639
03016647
03016655
03016663
03016671
03016680
b
L
s + 0,1
h a + 0,3
- 0,2
max.
0
max.
b
max.
18
22,1
22,1
23,6
23,6
25,6
25,6
25,6
25,6
26,6
26,6
26,6
26,6
26,6
26,6
26,6
26,6
26,6
26,6
11,5
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
0,6
0,6
0,6
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
9,5
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
7,5
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
Max. Values* Max. Values*
Box
Torque Nm Pressure (Bars) Quantity
1,5
3,0
3,0
3,5
3,5
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
40
45
45
42
36
32
28
24
19
17
15
13
11
10
9
8
7
6
5
Packing
200
200
200
200
200
100
100
100
100
100
100
50
50
25
25
25
25
25
25
1600
800
800
800
800
800
800
800
400
100
100
400
400
200
200
25
25
25
25
MADE IN SPAIN
MADE IN SPAIN
Materials W2
Screw:
Qst 36-3 Mild steel (DIN
1.0213)
Silver-white Cr3 Zinc-Plated
Ø
L
MADE IN SPAIN
h
Band and Housing:
X6Cr17 Stainless steel
(DIN 1.4016) (AISI-430)
S
a
23
9mm L-band Worm-drive
Hose clip W4
DIN: 3017 Light series
Asfa-L W4 Hose Clip
Information
Thanks to the exclusive
design of the housing, the
ASFA-L W4 hose clip has
excellent performance while
being at the same time very
compact. The cold-formed
stamped band thread,
smoothed on the underside,
combined with beveled
band-edges protects the
hose from damage.
The ASFA-L W4 hose clip
complies fully with the DIN
3017 norm and also with the
RoHs directive EU
20032/95/EC dated 1st July
2006.
This clip is ideally for use in
the marine industry, due to
the corrosion resistance
offered by the use of AISI304 stainless steel in its
manufacture.
Ø Application Reference
mm
W4
8-16
12-22
16-27
20-32
25-40
30-45
32-50
40-60
50-70
60-80
70-90
80-100
90-110
100-120
110-130
120-140
130-150
140-160
03014019
03014027
03014035
03014043
03014051
03014060
03014078
03014086
03014094
03014107
03014115
03014123
03014140
03014158
03014166
03014174
03014182
03014190
L
s
h
b
a +- 0,3
0,2 max.
max. ± 0,05 max.
22,1
22,1
23,6
23,6
25,6
25,6
25,6
25,6
26,6
26,6
26,6
26,6
26,6
26,6
26,6
26,6
26,6
26,6
0,6
0,6
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
(9 mm bandwidth)
Max. Values* Max. Values*
Box
Torque Nm Pressure (Bars) Quantity
3,0
3,0
3,5
3,5
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
45
45
42
36
32
28
24
19
17
15
13
11
10
9
8
7
6
5
Packing
200
200
200
200
100
100
100
100
100
100
50
50
25
25
25
25
25
25
800
800
800
800
800
800
800
400
100
100
400
400
200
200
25
25
25
25
*The maximum application pressure
can vary depending on the type of
hose used and the geometry of the
coupling.
Patented Worldwide.
b
MADE IN SPAIN
Materials W4
MADE IN SPAIN
Screw:
AISI-304 Cu
Stainless steel
Band and Housing:
X5CrNi1810
Stainless steel
(DIN 1.4301)
(AISI-304)
Ø
L
MADE IN SPAIN
h
S
a
24
9mm L-band Worm-drive
Hose clip W5
DIN: 3017 Light series
Asfa-L W5 Hose Clip (9 mm bandwidth)
Information
Thanks to the exclusive
design of the housing, the
ASFA-L W5 hose clip has
excellent performance while
being at the same time very
compact. The cold-formed
stamped band thread,
smoothed on the underside,
combined with beveled
band-edges protects the
hose from damage.
The ASFA-L W5 hose clip
complies fully with the DIN
3017 norm and also with the
RoHs directive EU
20032/95/EC dated 1st July
2006.
This clip is ideally for use in
the petrochemical, foodstuffs
and marine industry due to
the outstanding corrosion
resistance offered by the use
of AISI-316 stainless steel in
its manufacture
Ø Application Reference
mm
W5
8-16
12-22
16-27
20-32
25-40
30-45
32-50
40-60
50-70
60-80
70-90
80-100
90-110
100-120
110-130
120-140
130-150
140-160
03015759
03015767
03015775
03015783
03015804
03015812
03015820
03015839
03015847
03015855
03015863
03015871
03015880
03015898
03015900
03015919
03015927
03015935
L
s
h a + 0,3 b
max. ± 0,05 max. - 0,2 max.
22,1
22,1
23,6
23,6
25,6
25,6
25,6
25,6
26,6
26,6
26,6
26,6
26,6
26,6
26,6
26,6
26,6
26,6
0,6
0,6
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
Max. Values* Max. Values*
Box
Torque (Nm) Pressure (Bars) Quantity
3,0
3,0
3,5
3,5
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
4,0
45
45
42
36
32
28
24
19
17
15
13
11
10
9
8
7
6
5
Packing
200
200
200
200
100
100
100
100
100
100
50
50
25
25
25
25
25
25
800
800
800
800
800
800
800
400
100
100
400
400
200
200
25
25
25
25
*The maximum application pressure
can vary depending on the type of
hose used and the geometry of the
coupling.
Patented Worldwide
Materials W5
b
MADE IN SPAIN
Screw:
AISI-316 Cu
Stainless steel (A4)
Band and Housing:
X5CrNiMo 17.12.2
Stainless steel
(DIN 1.4401)
(AISI-316) (A4)
MADE IN SPAIN
Ø
L
MADE IN SPAIN
h
S
a
25
12mm S-band
Worm-drive Hose clip W1
DIN: 3017 Heavy series
Asfa-S W1 Hose Clip (12 mm bandwidth)
Information
The ASFA-S W1 hose clip
combines an innovative
housing designed to take a
lot of torque and a sturdy
12mm band which together
make this a high performance
hose clip. The cold-formed
stamped band thread,
smoothed on the underside,
combined with beveled bandedges protects the hose from
any damage.
The ASFA-S W1 hose clip
complies fully with the DIN
3017 norm and also with the
RoHs directive EU
20032/95/EC dated 1st July
2006.
This clip is ideally for use in
general industrial applications
where a robust and
competitively priced clip is
called for. The ASFA-S W1 is
especially recommended for
use in agriculture and in fluid
transfer applications.
Ø Application Reference
mm
W1
16-27
20-32
25-40
30-45
32-50
40-60
50-70
60-80
70-90
80-100
90-110
100-120
110-130
120-140
130-150
140-160
150-170
160-180
170-190
180-200
190-210
200-220
210-230
220-240
03009001
03009002
03009003
03009004
03009005
03009006
03009007
03009008
03009009
03009010
03009011
03009012
03009013
03009014
03009015
03009016
03009017
03009018
03009019
03009020
03009021
03009022
03009023
03009024
L
s
+0,1 0
h
a +- 0,4
0,2
b
max.
30,6
30,6
30,6
30,6
30,6
30,6
32,6
32,6
32,6
32,6
32,6
32,6
32,6
35,6
35,6
35,6
35,6
35,6
35,6
35,6
35,6
35,6
35,6
35,6
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
Max. Values* Max. Values*
Torque (Nm) Pressure (Bars)
4,2
5,2
5,2
5,2
6,0
6,0
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
Box
Quantity
Packing
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
400
400
400
400
400
400
400
50
50
200
200
200
25
25
25
25
25
25
10
10
10
10
10
10
45
45
40
35
35
30
25
20
17
14
12
10
8
7
6
5
4
3
2
2
1,8
1,8
1,6
1,6
MADE IN SPAIN
*The maximum application pressure
can vary depending on the type of
hose used and the geometry of the
coupling.
Patented Worldwide
b
Materials W1
L
Screw:
Qst 36-3 Mild steel
(DIN 1.0213)
Silver-white Cr3
Zinc-Plated
MADE IN SPAIN
Ø
Band and Housing:
Galvanized steel
S/EN 10292
(DIN 1.0935)
h
S
a
26
12mm S-band
Worm-drive Hose clip W2
DIN: 3017 Heavy series
Asfa-S W2 Hose Clip (12 mm bandwidth)
Information
The ASFA-S W2 hose clip
combines an innovative
housing and a sturdy 12mm
band which together make
this a high performance hose
clip. The cold-formed
stamped band thread,
smoothed on the underside,
combined with beveled bandedges protects the hose from
any damage. The AISI-430
Stainless steel finish of the
band and housing make this
a very attractive clip.
The ASFA-S W2 hose clip
complies fully with the DIN
3017 norm and also with the
RoHs directive EU
20032/95/EC dated 1st July
2006.
This clip is ideally for use in
automotive applications, in
agriculture and in fluid transfer
applications.
Ø Application Reference
W2
16-27
20-32
25-40
30-45
32-50
40-60
50-70
60-80
70-90
80-100
90-110
100-120
110-130
120-140
130-150
140-160
150-170
160-180
170-190
180-200
190-210
200-220
210-230
220-240
03017017
03017025
03017033
03017009
03017041
03017050
03017068
03017076
03017084
03017092
03017105
03017113
03017121
03017130
03017148
03017156
03017164
03017172
03017180
03017199
03017201
03017210
03017228
03017236
*The maximum application
pressure can vary depending
on the type of hose used and
the geometry of the coupling.
L
s
+0,1 0
h
a +- 0,4
0,2
b
max.
Max. Values*
Torque (Nm)
29,6
29,6
29,6
29,6
29,6
29,6
31,6
31,6
31,6
31,6
31,6
31,6
31,6
34,6
34,6
34,6
34,6
34.6
34,6
34,6
34,6
34,6
34,6
34,6
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
4,2
5,2
5,2
5,2
6,0
6,0
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
Max. Values*
Box
Pressure (Bars) Quantity
45
45
40
35
35
30
25
20
17
14
12
10
8
7
6
5
4
3
2
2
1,8
1,8
1,6
1,6
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
Packing
400
400
400
400
400
400
400
50
50
200
200
200
25
25
25
25
25
25
10
10
10
10
10
10
MADE IN SPAIN
Patented Worldwide
Materials W2
b
L
Screw:
Qst 36-3 Mild steel
(DIN 1.0213)
Silver-white Cr3 Zinc-Plated
Band and Housing:
X6Cr17 Stainless steel
(DIN 1.4016) (AISI-430)
MADE IN SPAIN
Ø
h
S
a
27
12mm S-band
Worm-drive Hose clip W4
DIN: 3017 Heavy series
Asfa-S W4 Hose Clip (12 mm bandwidth)
Information
The ASFA-S W4 hose clip
combines an innovative
housing and a sturdy 12mm
band which together make
this a high performance hose
clip. The cold-formed
stamped band thread,
smoothed on the underside,
combined with beveled
band-edges protects the
hose from any damage. The
ASFA-S W4 hose clip
complies fully with the DIN
3017 norm and also with the
RoHs directive EU
20032/95/EC dated 1st July
2006.
Crafted entirely from AISI304 stainless steel, this clip
is ideally for use in marine
applications or in any
industrial assemblies where
high levels of corrosion
resistance are required.
Ø Application
mm
Reference
W4
L
s
+0,5
h
a +- 0,4
0,2
b
max.
Max. Values*
Torque (Nm)
Max. Values*
Pressure (Bars)
Box
Quantity
Packing
16-27
20-32
25-40
30-45
32-50
40-60
50-70
60-80
70-90
80-100
90-110
100-120
110-130
120-140
130-150
140-160
150-170
160-180
170-190
180-200
190-210
200-220
210-230
220-240
03014730
03014510
03014529
03014748
03014537
03014545
03014553
03014561
03014570
03014588
03014596
03014609
03014617
03014625
03014633
03014641
03014650
03014668
03014676
03014684
03014692
03014705
03014713
03014721
29,6
29,6
29,6
29,6
29,6
29,6
31,6
31,6
31,6
31,6
31,6
31,6
31,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
4,6
5,6
5,6
5,6
6,5
6,5
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
45
45
40
35
35
30
25
20
17
14
12
10
8
7
6
5
4
3
2
2
1,8
1,8
1,6
1,6
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
400
400
400
400
400
400
400
50
50
200
200
200
25
25
25
25
25
25
10
10
10
10
10
10
*The maximum application pressure
can vary depending on the type of
hose used and the geometry of the
coupling.
MADE IN SPAIN
Patented Worldwide
Materials W4
b
L
Screw:
AISI-304 Cu
Stainless steel (A2)
Band and Housing:
X5CrNi1810
Stainless steel
(DIN 1.4301)
(AISI-304) (A2)
MADE IN SPAIN
Ø
h
S
a
28
12mm S-band Wormdrive Hose clip W5
DIN: 3017 Heavy series
Asfa-S W5 Hose Clip
Information
Ø Application
mm
Reference
W5
L
s
h
a +- 0,4
0,2
max. ± 0,5 max.
16-27
20-32
25-40
30-45
32-50
40-60
50-70
60-80
70-90
80-100
90-110
100-120
110-130
120-140
130-150
140-160
150-170
160-180
170-190
180-200
190-210
200-220
210-230
220-240
03017720
03017500
03017519
03017738
03017527
03017535
03017543
03017551
03017560
03017578
03017586
03017594
03017607
03017615
03017623
03017631
03017640
03017658
03017666
03017674
03017682
03017690
03017703
03017711
29,6
29,6
29,6
29,6
29,6
29,6
31,6
31,6
31,6
31,6
31,6
31,6
31,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
The ASFA-S W5 hose clip
combines an innovative
housing, a sturdy 12mm band
and is made entirely of AISI316 stainless steel. The coldformed stamped band thread,
smoothed on the underside,
combined with beveled bandedges protects the hose from
any damage. The ASFA-S W5
hose clip complies fully with
the DIN 3017 norm and also
with the RoHs directive EU
20032/95/EC dated 1st July
2006.
Crafted entirely from AISI-316
stainless steel, this clip is
ideally for use in the marine,
petrochemical and foodstuffs
sectors, where only the highest
quality
Stainless steel is acceptable
due to the extreme application
conditions.
*The maximum application
pressure can vary depending on
the type of hose used and the
geometry of the coupling.
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
b
max.
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
(12 mm bandwidth)
Max. Values* Max. Values*
Torque (Nm) Pressure (Bars)
4,6
5,6
5,6
5,6
6,5
6,5
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
7,0
Box
Quantity
Packing
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
400
400
400
400
400
400
400
50
50
200
200
200
25
25
25
25
25
25
10
10
10
10
10
10
45
45
40
35
35
30
25
20
17
14
12
10
8
7
6
5
4
3
2
2
1,8
1,8
1,6
1,6
MADE IN SPAIN
Patented Worldwide
Materials W5
b
Screw:
AISI-316 Cu Stainless steel (A4)
L
Band and Housing:
X5CrNiMo 17.12.2
Stainless steel
(DIN 1.4401)
(AISI-316) (A4)
MADE IN SPAIN
Ø
h
S
a
29
High Pressure
Super Heavy-Duty
Hose Clamp W1
High Pressure series
Super Heavy-duty hose clamp W1
Information
Mikalor was the first
company to design and
produce a heavy-duty hose
clamp, and since then the
Super clamp has gone from
strength to strength. The
high strength 8.8 grade steel
nut and T-bolt mean that
Super can be tightened up
hard using many different
kinds of tool, while the
beveled edges protect the
hose from harm.
The Super clamp is in its
element in agricultural
applications, waste water
extraction, mining, quarrying
or on other sectors where a
rugged yet competitively
priced heavy-duty clamp is
required.
*The maximum application
pressure can vary depending on
the type of hose used and the
geometry of the coupling.
Patented Worldwide
Materials W1
Ø Application
d mm
Reference
W1
r
e
a
b
s
Max. Values*
Torque Nm
Max. Values*
Pressure (Bars)
Box
Quantity
Packing
17-19
20-22
23-25
26-28
29-31
32-35
36-39
40-43
44-47
48-51
52-55
56-59
60-63
64-67
68-73
74-79
80-85
86-91
92-97
98-103
104-112
113-121
122-130
131-139
140-148
149-161
162-174
175-187
188-200
201-213
214-226
227-239
240-252
03018263
03018271
03018280
03018298
03018300
03018319
03018327
03018335
03018010
03018028
03018036
03018044
03018052
03018060
03018079
03018087
03018095
03018108
03018116
03018124
03018132
03018140
03018159
03018167
03018175
03018183
03018191
03018204
03018212
03018220
03018239
03018247
03018255
M6
M6
M6
M6
M6
M6
M7
M7
M7
M7
M7
M7
M7
M7
M7
M7
M7
M8
M8
M8
M8
M8
M8
M8
M8
M8
M10
M10
M10
M10
M10
M10
M10
8
8
8
8
8
8
10
10
10
10
10
10
10
10
10
10
10
13
13
13
13
13
13
13
13
13
15
15
15
15
15
15
15
18 +0,2
18 +0,2
18 +0,2
18 +0,2
18 +0,2
18 +0,2
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
19,8
19,8
19,8
19,8
19,8
19,8
22
22
22
22
22
22
22
22
22
22
22
27,5
27,5
27,5
27,5
27,5
27,5
27,5
27,5
27,5
31
31
31
31
31
31
31
0,6
0,6
0,6
0,6
0,8
0,8
0,8
0,8
1,2
1,2
1,2
1,2
1,2
1,2
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
1,7
10
10
10
10
10
10
12
12
12
12
12
12
16
16
16
16
16
30
30
30
30
30
30
30
30
30
45
45
45
45
45
45
45
45
45
45
45
45
45
40
40
40
40
40
40
36
36
36
36
36
28
28
28
20
20
20
12
12
12
9
9
9
6
6
6
3
50
50
50
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
400
400
400
400
400
200
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
b
e
T-Bolt:
8.8 grade steel
Yellow-zinc plated
S
r
Band and Bridge:
Mild steel
Yellow zinc-plated
Washer and Trunions:
Mild steel
Yellow zinc-plated
SECTION A-A
Ød
44-47
Pat.
a
32
Supra Heavy-Duty Hose
Clamp W2 Stainless Steel
High Pressure series
Supra Heavy-duty hose clamp W2
Information
The Supra range is the natural
evolution of the Super W1
Clamp. Due to its revolutionary
swiveling bridge, Supra W2 can
be mounted in the most
awkward applications without
having to remove the hose. It
can be opened up and fastened
again when in place without
dislodging any other parts of the
clamp, making assembly much
easier.
Thanks to the beveled edges,
the hose is protected from
damage. The Supra W2 clamp
complies fully with the RoHs
directive EU 20032/95/EC dated
1st July 2006.
The high-strength bolt, designed
and manufactured by Mikalor
specifically for this clamp,
together with the captive nut and
spacer system allow you to
clamp the most demanding of
hose assemblies.
This is the clamp of choice for
professionals in the industrial
hose, automotive and agricultural
machinery sectors as well as in
all industrial applications where
an outstanding and above all
reliable heavy-duty clamp is
required.
*The maximum application pressure
can vary depending on the type of hose
used and the geometry of the coupling.
Patented Worldwide
Ø Application
mm
Reference
W2
r
e
a
b
Max. Values*
Torque (Nm)
Max. Values*
Pressure (Bars)
Box
Quantity
Packing
17-19
19-21
21-23
23-25
25-27
27-29
29-31
31-34
34-37
37-40
40-43
43-47
47-51
51-55
55-59
59-63
63-68
68-73
73-79
79-85
85-91
91-97
97-104
104-112
112-121
121-130
130-140
140-150
150-162
162-174
174-187
187-200
200-213
213-226
226-239
239-252
03019012
03019020
03019039
03019047
03019055
03019063
03019071
03019080
03019098
03019100
03019119
03019127
03019135
03019143
03019151
03019160
03019178
03019186
03019194
03019207
03019215
03019223
03019231
03019240
03019258
03019266
03019274
03019282
03019290
03019303
03019311
03019320
03019338
03019346
03019354
03019362
M6
M6
M6
M6
M6
M6
M7
M7
M7
M7
M7
M7
M7
M7
M7
M7
M7
M8
M8
M8
M8
M8
M8
M8
M8
M8
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
8
8
8
8
8
8
10
10
10
10
10
10
10
10
10
10
10
13
13
13
13
13
13
13
13
13
15
15
15
15
15
15
15
15
15
15
18 +0,2
18 +0,2
18 +0,2
18 +0,2
18 +0,2
18 +0,2
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
19,8
19,8
19,8
19,8
19,8
19,8
22
22
22
22
22
22
22
22
22
22
22
27,5
27,5
27,5
27,5
27,5
27,5
27,5
27,5
27,5
31
31
31
31
31
31
31
31
31
31
10
10
10
10
10
10
12
12
12
12
12
12
16
16
16
16
16
30
30
30
30
30
30
30
30
30
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
40
40
40
40
40
40
36
36
36
36
36
28
28
28
20
20
20
12
12
12
9
9
9
6
6
6
3
3
3
3
50
50
50
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
400
400
400
400
400
200
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
b
e
Materials W2
8.8
Band and Bridge:
X6Cr17 Stainless steel
(DIN 1.4016) (AISI-430)
Tornillo:
Qst 36-3 Mild steel
(DIN 1.0213)
Silver-white Cr3 Zinc-Plated
Ød
Pat.
SECTION A-A
43-47
A
A
33
a
Supra Heavy-Duty Hose
Clamp Stainless Steel W4
High Pressure series
Supra Heavy-duty hose clamp W4
Information
The Supra range is the natural
evolution of the Super W1
Clamp. Due to its revolutionary
swiveling bridge, Supra W4 can
be mounted in the most
awkward applications without
having to remove the hose. It
can be opened up and fastened
again when in place without
dislodging any other parts of the
clamp, making assembly much
easier.
Thanks to the beveled edges,
the hose is protected from
damage. The Supra W4 clamp
complies fully with the RoHs
directive EU 20032/95/EC dated
1st July 2006.
The stainless steel bolt together
with the captive nut and spacer
system allow you to clamp the
most demanding of hose
assemblies.
Supra W4 is a full stainless steel
clamp, destined for demanding
applications where high
corrosion resistance is vital.
This top of the range heavy-duty
clamp is ideal for marine
applications and the foodstuffs
industry, as well as for countless
industrial applications where
AISI-304 stainless steel is
specified.
*The maximum application pressure
can vary depending on the type of
hose used and the geometry of the
coupling.
Ø Application
mm
Reference
W4
r
e
a
b
Max. Values*
Torque (Nm)
Max. Values*
Pressure (Bars)
Box
Quantity
Packing
17-19
19-21
21-23
23-25
25-27
27-29
29-31
31-34
34-37
37-40
40-43
43-47
47-51
51-55
55-59
59-63
63-68
68-73
73-79
79-85
85-91
91-97
97-104
104-112
112-121
121-130
130-140
140-150
150-162
162-174
174-187
187-200
200-213
213-226
226-239
239-252
03013016
03013024
03013032
03013040
03013059
03013067
03013075
03013083
03013091
03013104
03013112
03013120
03013139
03013147
03013155
03013163
03013171
03013180
03013198
03013200
03013219
03013227
03013235
03013243
03013251
03013260
03013278
03013286
03013294
03013307
03013315
03013323
03013331
03013340
03013358
03013366
M6
M6
M6
M6
M6
M6
M7
M7
M7
M7
M7
M7
M7
M7
M7
M7
M7
M8
M8
M8
M8
M8
M8
M8
M8
M8
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
8
8
8
8
8
8
11
11
11
11
11
11
11
11
11
11
11
13
13
13
13
13
13
13
13
13
15
15
15
15
15
15
15
15
15
15
18 +0,2
18 +0,2
18 +0,2
18 +0,2
18 +0,2
18 +0,2
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
19,8
19,8
19,8
19,8
19,8
19,8
22
22
22
22
22
22
22
22
22
22
22
27,5
27,5
27,5
27,5
27,5
27,5
27,5
27,5
27,5
31
31
31
31
31
31
31
31
31
31
10
10
10
10
10
10
12
12
12
12
12
12
16
16
16
16
16
30
30
30
30
30
30
30
30
30
45
45
45
45
45
45
45
45
45
45
40
40
40
40
40
40
35
35
35
35
35
35
30
30
30
30
30
20
20
20
15
15
15
10
10
10
6
6
6
3
3
3
3
3
3
3
50
50
50
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
400
400
400
400
400
200
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
Patented Worldwide
b
e
Materials W4
8.8
Band and Bridge:
X5CrNI 1810 Stainless steel
(DIN 1.4301) (AISI-304) (A2)
Bolt:
AISI 302 Cu
Stainless steel
Ød
Pat.
SECTION A-A
43-47
A
A
34
a
Supra CT Constant
Tension Heavy-Duty Hose
Clamp W2 Stainless steel
High Pressure series
Supra CT W2 Stainless Steel
Information
The Supra CT clamp
incorporates a series of AISI304 Stainless steel spring
washers to the outstanding
Supra W2 clamp. This
specialized version of the Supra
W2 is used in applications
subject to vibration and/or
great variations in temperature
and which cause the
components of a hose
assembly to expand and
contract. Thanks to the spring
washer system, the Supra CT
maintains constant pressure
around the hose and prevents
leakage. The beveled edges
protect the hose from damage.
The Supra CT clamp complies
fully with the RoHs directive
EU 20032/95/EC dated 1st
July 2006.
This clamp is generally fitted in
high-powered diesel engines
in heavy machinery, trucks,
buses, marine engines and
diesel-powered generators as
well as in various other
industrial applications where
expansion and contraction
cause assemblies using
standard clamps to leak.
*The maximum application
pressure can vary depending on
the type of hose used and the
geometry of the coupling.
Patented Worldwide
Ø Application
mm
Reference
W2
r
e
a
b
Max. Values*
Torque (Nm)
Max. Values*
Pressure (Bars)
Box
Quantity
Packing
17-19
19-21
21-23
23-25
25-27
27-29
29-31
31-34
34-37
37-40
40-43
43-47
47-51
51-55
55-59
59-63
63-68
68-73
73-79
79-85
85-91
91-97
97-104
104-112
112-121
121-130
130-140
140-150
150-162
162-174
174-187
187-200
200-213
213-226
226-239
239-252
03020100
03020118
03020126
03020134
03020142
03020150
03020169
03020177
03020185
03020193
03020206
03020214
03020222
03020230
03020249
03020257
03020265
03020273
03020281
03020290
03020302
03020310
03020329
03020337
03020345
03020353
03020361
03020370
03020388
03020396
03020409
03020417
03020425
03020433
03020441
03020450
M6
M6
M6
M6
M6
M6
M7
M7
M7
M7
M7
M7
M7
M7
M7
M7
M7
M8
M8
M8
M8
M8
M8
M8
M8
M8
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
10
10
10
10
10
10
11
11
11
11
11
11
11
11
11
11
11
13
13
13
13
13
13
13
13
13
17
17
17
17
17
17
17
17
17
17
18 +0,2
18 +0,2
18 +0,2
18 +0,2
18 +0,2
18 +0,2
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
20 +0,3
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
25 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
28 +0,4
19,8
19,8
19,8
19,8
19,8
19,8
22
22
22
22
22
22
22
22
22
22
22
27,5
27,5
27,5
27,5
27,5
27,5
27,5
27,5
27,5
31
31
31
31
31
31
31
31
31
31
4,5
4,5
4,5
4,5
4,5
4,5
8,0
8,0
8,0
8,0
8,0
10,0
10,0
10,0
10,0
10,0
10,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
25,0
50
50
50
50
50
50
50
50
50
50
50
50
48
48
45
45
42
42
40
40
38
38
36
36
34
34
34
28
28
28
20
20
20
12
12
12
9
9
9
6
6
6
3
3
3
3
50
50
50
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
400
400
400
400
400
200
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
b
Materiales W2
e
Band and Bridge:
X6Cr17 Stainless steel
(DIN 1.4016) (AISI-430)
r
Sreew:
8.8 grade steel
Silver-white Cr3 Zinc-Plated
8.8
Ød
SECTION A-A
43-47
Pat.
Washers and Trunions:
AISI 304 Stainless steel
a
35
Special Clips
and Clamps
9mm L-band Stainless
steel Worm-drive clip
W4 Double Bridge Clip
Light series
Double Bridge Clip
Information
The Double Bridge clip was
developed by the Mikalor
R&D Department due to
requirements from the
ventilation sector for a
clamp suitable for spiral
hose. This is just one
example of how we put our
engineering know-how at
the service of our
customers. We work
together with our customers
to design and craft the
solution to their needs in
each case. The DoubleBridge clip is manufactured
in AISI-304 stainless steel.
Reference
W4
Application
Ø mm
a +- 0,3
0,2
b
Max.
L
h
Box
Quantity
Packing
0301409A
0301410A
0301411B
0301412B
0301415B
0301417B
0301419B
50-70
60-80
70-90
80-100
100-120
120-140
140-160
9
9
9
9
9
9
9
14
14
14
14
14
14
14
25,6
25,6
25,6
25,6
25,6
25,6
25,6
10
10
10
10
10
10
10
100
100
100
50
25
25
25
100
100
100
50
200
200
25
*The maximum application pressure
can vary depending on the type of
hose used and the geometry of the
coupling.
Patented Worldwide
b
Materials W4
L
Screw:
AISI-304 Cu Stainless steel
Band and Housing:
X5CrNi 1810 Stainless steel
(DIN 1.4301) (AISI-304)
MADE IN SPAIN
h
S
a
38
Titanium S-band
Worm-drive Hose clip
100% Titanium
Titanium-TI Hose Clip (12 mm bandwidth)
Information
The use of Titanium in the
manufacture of this clip, together
with the innovative design of the
housing and the 12mm bandwidth
mean that the Titanium clip gives
superlative comparative results in
weight, performance and corrosion
resistance, not just compared with
the rest of the Mikalor worm-drive
range, but with worldwide
competition included.
We can supply all dimensions from
16-27 up to 220-240 thanks to the
revolutionary manufacturing
process.
Due to the combination of its
extraordinary low weight, increased
pressure values and corrosion
resistance, this clip is
recommended for use in
competition engines, whether they
are on land, in the sea or in aircraft.
Each Titanium clip is subject to
individual quality control using
automatic control systems to
ensure that all parameters function
to perfection.
Titanium clips are hand-packed in
boxes of 4 units per diameter, which
include an instruction manual and
technical specification sheet.
This clip conforms to all EU norms
and directives.
We can truthfully say that we believe
the Titanium clip to be the world’s
finest hose clip
*The maximum application pressure
can vary depending on the type of
hose used and the geometry of the
coupling.
Ø Application Reference
mm
16-27
20-32
25-40
30-45
32-50
40-60
50-70
60-80
70-90
80-100
90-110
100-120
110-130
120-140
130-150
140-160
150-170
160-180
170-190
180-200
190-210
200-220
210-230
220-240
03009502
03009510
03009529
03009537
03009545
03009553
03009561
03009570
03009588
03009596
03009609
03009617
03009625
03009633
03009641
03009650
03009668
03009676
03009684
03009692
03009705
03009713
03009721
03009730
L
s
max. +0,1 0
h
a +- 0,4
0,2
b
max.
Max. Values*
Torque (Nm)
29,6
29,6
29,6
29,6
29,6
29,6
31,6
31,6
31,6
31,6
31,6
31,6
31,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
34,6
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
12,2
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
5,0
6,0
6,0
6,0
7,0
7,0
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
7,5
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
Max. Values*
Box
Pressure (Bars) Quantity
47
47
42
37
37
32
26
21
18
15
13
11
8,5
7,4
6,3
5,3
4,2
3,2
2,1
2,1
1,9
1,9
1,7
1,7
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
Packing
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
MADE IN SPAIN
b
L
Patented Worldwide
Materials
Screw:
Ti-3 (3.7055)
S/ASTM B 265-79
Band:
Ti-2 (3.7035)
S/ASTM B 265-79
Housing:
Ti-1 (3.7032)
S/ASTM B 265-79
MADE IN SPAIN
Ø
h
S
a
39
Assortment
Boxes and
Display Units
Worm-Drive Hose Clip
Assortment Boxes
DIN 3017
Contents
Reference
Information
With the aim of providing you
with the hose clip which most
adequately suits your needs,
we have developed a wide
range of hose clip assortment
boxes.
The different diameters of clip
are arranged in individual
compartments, making it easy
to find the appropriate size.
The sturdy plastic case is also
very convenient for
transporting the product.
All assortment boxes include
a flexible hex-socket
screwdriver which can be
used to torque up Mikalor
worm-drive clips in all sorts
of application zones.
03503028
03503044
03503087
03503095
03503108
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø Flexi Series Material
8-16 12-22 16-27 20-32 25-40 30-45 32-50 40-60 50-70 60-80 70-90 driver
Quality
Pcs Pcs Pcs Pcs
Pcs
Pcs Pcs Pcs Pcs Pcs Pcs
60
60
-
40
40
-
40
40
25
25
25
20
20
20
20
20
20
20
12
12
12
20
20
-
10
10
8
8
8
10
10
6
6
6
6
6
6
6
6
5
5
5
5
5
5
1
1
1
1
1
LIGHT
LIGHT
HEAVY
HEAVY
HEAVY
W2
W4
W1
W2
W4
Materials
Case:
Yellow PVC
27 cm.
38 cm.
Insert:
High impact red
polypropylene
8 cm.
42
Worm-Drive
Hose Clip Display Units
DIN 3017
Contents
Reference
Ø
Ø
8-16 12-22
Pcs
Pcs
02500052
02500060
02500132
02500159
02500175
200
200
-
Information
Our range of wall-displays is
one of the most complete on
the market, meaning that you
can choose the one which most
suits your needs and the space
at your disposal.
The design of these easy to use
wall displays, which are both
attractive and well-organized,
makes them an ideal sales tool.
200
200
-
Ø
16-27
Pcs
Ø
20-32
Pcs
Ø
25-40
Pcs
Ø
32-50
Pcs
Ø
40-60
Pcs
Ø
50-70
Pcs
Ø
70-90
Pcs
Series
Material
Quality
200
200
-
200
200
50
50
50
100
100
50
50
50
100
100
50
50
50
100
100
50
50
50
100
100
50
50
50
50
50
50
LIGHT
LIGHT
HEAVY
HEAVY
HEAVY
W2
W4
W1
W2
W4
Materials
92 cm.
38 cm.
Display:
High resistance
PS plastic
Color:
Yellow
10 cm.
43
D.L.: B-8870-2008
Much more than just clamps
Garraf, 10-12 · Pol. Ind. Pla de la Bruguera
08211 CASTELLAR DEL VALLÈS (Barcelona) España
Tel. (00-34) 937 299 610 - Fax (00-34) 937 142 425
damesa@damesa.es - www.damesa.es

Similar documents

W1 - Industrial Quality Parts

W1 - Industrial Quality Parts Mikalor has been present on the international fasteners market since 1943 with a wide range of top-quality products which provide fastening solutions adapted to the needs of modern industry. The Mi...

More information

Sans titre

Sans titre The two ears give the clip extra grip and help to maintain constant pressure around the hose. Fitting is more flexible and exact. The practical design of two ear clips means that they clamp firmly ...

More information

Bolt Clamps W1 - HCD Flow Technology

Bolt Clamps W1 - HCD Flow Technology nut and T-bolt mean that Super can be tightened up hard using many different kinds of tool, while the beveled edges protect the hose from harm. The Super clamp is in its element in agricultural app...

More information

our Clips and Clamps Catalogue

our Clips and Clamps Catalogue zone and prevents potential damage due to vibration. The steel reinforced screw holes at either end ensure they clamp down firmly. P-clips are particularly recommended for mounting pipes, electric ...

More information

22A REDDEN STREET PORTSMITH, CAIRNS

22A REDDEN STREET PORTSMITH, CAIRNS 1-1/2" BEND 90 DEG 2002E 2" BEND 90 DEG 1501E-316 1-1/2" BEND RADIUS 90DEG 2001E316 2" BEND RADIUS 90 DEG

More information