Product Guide - Babcock Wanson UK

5. PROCESS AIR HEATING
DIRECT AND INDIRECT FIRED SYSTEMS / OIL AND GAS FIRED
A complete range of standard and custom built air heaters for process application.
8 Babcock Wanson system designs
www.babcock-wanson.co.uk
PRODUCT GUIDE
FOR FULL DETAILS OF ANY PRODUCT IN THIS GUIDE PLEASE CONTACT US
1. STEAM BOILERS AND WATER TREATMENT 2. HEAT RECOVERY BOILERS 3. THERMAL FLUID HEATERS
4. VOC THERMAL OXIDISERS 5. PROCESS AIR HEATING 6. AFTER SALES CARE AND CONTRACT MANAGEMENT
1. STEAM BOILERS & WATER TREATMENT
FIRETUBE STEAM BOILERS / STEAM GENERATORS / EUROSTEAM / WATER TREATMENT
Indirect MTV/HTV air heater range
8 150 kW to 2400 kW standard range
8 Oil or gas fired
Steambloc Firetube Boilers 100 kg/h – 25,000 kg/h
8 Boiler efficiency 90%. 94% with optional economiser
8 300OC max air off temp
8 Fully packaged and tested
Direct Fired
8 230OC max temp difference
8 Suitable for gaseous and/or liquid fuels
8 Mixbloc gas fired internal or
external duct burner
8 Special construction
for higher
temperatures
8 Three pass design
8 Temperature rise 700 K maximum
air off 700OC
O
8 Gasairbloc for non-recirculating or direct systems. Oil or
gas firing up to 1200OC
8 Food and
pharmaceutical,
drying and process
applications
8 Application for drying & curing also gas turbine exhaust
temperature lift for subsequent enhanced heat recovery
8 Large process air
distribution systems
8 Water cooled gas transfer chamber
8 Low emission burners
Eurosteam-ESM 1000 kg/h – 8000 kg/h
6. AFTER SALES CARE AND CONTRACT MANAGEMENT
8
ABOUT BABCOCK WANSON
Babcock Wanson is part of the International CNIM organisation
World leaders in environmental and energy industries.
Babcock and Wanson have been boiler builders working
together for approaching 50 years.
8
8 Once through coil type steam generator. Efficiency 90%
8 Advanced design. Inverter varispeed drives for precise
control of feedwater, fuel and combustion air
8 Low emission burners. Gasoil/LPG/Nat gas fuels
8 Optional exhaust gas recirculation
8 Double insulated
8 Quiet in operation
8 Safe design with no pressure vessels
8 Rapid response to load changes and quick start up from
cold to full steam
BS EN ISO
9001:2000
FM 29856
SERVICE AND PLANT CARE
Babcock Wanson worldwide specialise in Service and plant care with particular accent on preventative maintenance for all areas of
our business. In the UK our large team of fully qualified Service Engineers is able to provide the essential aftercare needs of the
wide variety of equipment available from our Group from Boilers to Thermal Oxidisers and from Air Heat Systems to Water
Treatment and Thermal Fluid Systems. These service facilities are available from our other Group Companies throughout Europe
and major industrial areas across the world.
130 years of Babcock – 80 years of Wanson – 50 years of Babcock Wanson UK.
“There is no substitute for experience.”
www.babcock-wanson.co.uk
Babcock Wanson UK Ltd 7 Elstree Way, Borehamwood, Hertfordshire WD6 1SA, UK
Tel: +44 (0) 20 8953 7111 Fax: +44 (0) 20 8207 5177 email: info@babcock-wanson.co.uk
Sales and Manufacturing facilities in United Kingdom, France, Italy, Morocco, Central Europe, Portugal, Spain and Switzerland.
The Babcock Wanson Organisation operates in more than 50 countries. This network makes it possible to offer services to Babcock Wanson customers anywhere in the world.
Babcock Wanson Company’s policy is one of continuous improvement and the right is reserved to change specifications and dimensions at any time without notice.
PRODUCT GUIDE UK/09/05/GPR/JN.3265/QT.2000 VIKING
Series VPX LN
200-1800 kg/h
(12 models)
8 Gas-fired, oil
fired or dual-fuel
Skid or container
mounted
assemblies for
both fire tube
and coil boilers
8 Low emission
and NOx
8 Water treatment
8 Low noise
8 High efficiency
8 Feed and
condensate vessels
8 Horizontal or
vertical
8 Ready piped and
wired
8 Blowdown system
8 immediate hook up
on site
Series VPX RR/HP
150-8000 kg/h
(15 models)
8 Once-through coil
design for safety,
compactness and
efficiency
8 Oil, gas or dual-fired
up to 50 bar working
pressure
8 Up to 90 bar working
pressure in closed
circuit natural
circulation configuration
2. HEAT RECOVERY BOILERS
STEAM GENERATORS
4. VOC THERMAL OXIDISERS
RECUPERATIVE / REGENERATIVE / COMBI
Odour and VOC abatement, Regenerative and Recuperative
Thermal Oxidising with heat recovery
Firetube and Coil Heat Recovery Boilers
A full range of customised Boilers to suit application and
process, including:8 Gas turbine and engine exhausts
8 Furnace and oxidiser heat recovery
8 Steam, Hot water or Thermal Fluid
8 Low gas pressure loss
8 For food, chemical and process applications
8 Energy efficient
8 Environmentally effective
8 Best technology and practice
Fire tube heat recovery boiler on BW DEO
VOC Oxidiser
3. THERMAL FLUID HEATERS
Regenerative VOC Oxidiser
TBC B / TPC LN / TPC EL / COMBI
Systems and applications design by Babcock-Wanson. Thermal Fluid systems are a simple and safe alternative to steam and regularly
show energy consumption savings in excess of 30% in addition to significant maintenance and other operating cost savings. Probably
the lowest operating cost of all heat transfer systems.
Series TPC LN (14 models)
250-2600 kW
Vertical or horizontal configuration,
oil or gas-fired Babcock Wanson
burners or customer choice suitable
for environmentally sensitive locations.
Full international approval.
Series TPC EL – 18-864 kW
Electric thermal
fluid
heaters of
modular
design and
construction in
18 kW modules.
Recuperative VOC Oxidiser
VOC Incineration
For the food, chemical, printing, coating and
laminating industries.
8 Recuperative thermal oxidising with heat
recovery
8 Regenerative thermal oxidising
8 Odour destruction
Thermal Oxidiser Rendering Plant
Series TPC B (12 models) 100-7000 kW
LNHI Combi
Coil construction, oil, gas or dual-firing for fluid
temperatures up to 400°C with mineral or synthetic
fluids. Approved by all the world’s leading insurance
and inspection agencies for land and marine
installations.
8 Low maintenance
8 Low heat loss
8 Low fuel consumption
8 High overall energy efficiency
Combined Thermal Fluid Heater
and Thermal Oxidiser.
LNHI COMBI offers a simple
solution to ensure environmental
emission compliance with high
efficiency energy production for
a wide range of food, chemical
and other industrial processes.
Combination Recuperative
Babcock Wanson Service
Babcock Wanson Turnkey
Ancillary equipment
Our after sales service is without doubt the best
of its type. Fully-trained and qualified Babcock
Wanson field service engineers are available at all
times, to assist in problem solving and to provide a
regular service and preventative maintenance care
programme for your plant. Our well-stocked parts
store means high plant availability to you. We also
provide a retrofit service to update existing
equipment to current designs, including fuel
conversions and works or site reconditioning.
Babcock Wanson are able to provide complete
turnkey heating installations for a broad selection of
Process heating applications. Our experienced
design, application and contracting teams are able
to provide a service which can be tailored to suit
customer needs. All Babcock Wanson products and
systems are designed to make best use of fuel and
energy and to comply with current and anticipated
international standards of construction and emission.
Babcock Wanson design and
supply a full range of boiler house
and plant room equipment
including feedwater treatment
plant, pressure vessels, blowdown
systems and control systems for
unattended equipment operation
and feedwater and combustion
air economisers. Skid or portable
boiler houses are one of our
specialities.
Tallow Fuel Processing Plant
Water Treatment Plant