For some of the best Stepvan Creations check out our

Transcription

Check out these Great
Customer Vans!
Chassis
If you would like to be included in our on-line Customer’s
Van page, send a short story and pictures of your van to
'feature@millsupply.com'. Periodically we include a 'Truck
of the Month' in our bimonthly flyer. These are some of
our winners, your van could be the next!
Body
pgs 02 - 79
GM/Workhorse........................................... 8-45
Ford......................................................... 46-55
Freightliner............................................... 56-73
International..............................................74-75
pgs 80 - 92
Union City Body...................................... 80-81
Grumman / Morgan Olson....................... 82-85
Utilimaster................................................ 86-88
Door Hardware pgs 93 - 111
Windshields, Windows, & Parts................ 93-96
Side Door Hardware............................... 97-101
Rear Door Hardware............................ 102-108
Roll Up Door pgs 112 - 125
Seating
Order a Replacement Door.................. 112-116
Todco.................................................... 117-121
Whiting..................................................122-124
Dover & Diamond........................................125
pgs 126 - 130
Driver's Seating....................................126-127
Passenger Seating...............................128-130
Heating & A/C pgs 131 - 151
Grumman / Morgan Olson....................132-135
Union City Body...................................136-137
Utilimaster.............................................138-140
Parts by Type........................................142-149
Wiper
Mirrors
pgs 152 - 160
Grumman / Morgan Olson................... 152-153
Utilimaster............................................ 154-155
Union City Body..........................................156
pgs 161 - 167
West Coast..................................................161
Velvac Dual Head................................ 162-163
Front & Rear Crossview....................... 164-165
Lights
pgs 168 - 187
LED...................................................... 169-181
Incandescent........................................181-185
Fluorescent..................................................180
Electrical
pgs 188 - 201
Liftgate
pgs 202 - 204
Miscellaneous pgs 205 - 207
Keep Updated at MillSupply.com
Stepvan 2016.indb 1
7/21/2016 2:12:41 PM
REPLACEMENT PARTS that fi
2
800-888-5072 • MillSupply.com
FRONT BUMPERS
FRONT BUMPERS
Original Rib Style Bumper
Convert your Rib Style Bumper to
New Smooth Look Bumper
our Smooth Look Bumper
Our bumper mounting bracket 85-632 will allow you to convert your rib style
bumper with one of our new smooth surface bumpers.
9-5/8" Tall
"Be sure to measure the width of your current bumper
in a straight line! Do not follow curvatures!"
Smooth Look
Powder Coated White
85-537 - 86" Long
85-538 - 96" Long
All Bumpers
Made in USA
11" Tall
Mounting holes
must be drilled
Smooth Look
Powder Coated White
85-528 - 90" Long
7" Tall
Mounting holes
must be drilled
Original Rib Style
Powder Coated White
85-500 - 85" Long
85-537 - 86" Front Bumper
Fits Utilimaster with Ford chassis. Holes must be
drilled for mounting bumper to the frame. Bumper
can be shipped UPS.
This bumper will fit Ford, Freightliner, and
Workhorse chassis. Holes must be drilled for
mounting bumper to the frame. Must ship by Freight.
Our new bracket and 'smooth look' bumpers are heavier
duty than the original rib bumper and offers a cleaner
look. Rib style bumper are still available, see below.
Fits Utilimaster with Freightliner chassis. The
universal design can replace all styles with or
without center hole or plug hole. Holes must be
drilled to mount a plug and for mounting the bumper
to the frame. Use our 85-632 bumper bracket for
mounting. Bumper must be shipped freight.
7 Gauge metal bumper fits Grumman and Utilimaster
with Freightliner and Ford chassis.
85-560 - 91.5" Front Bumper White
7 Gauge metal bumper is slightly angled and fits
Utilimaster with Ford chassis.
Mounting holes
must be drilled
7" Tall
85-632 1/4" steel bumper
bracket that fits Freightliner
chassis. Fits our bumpers
85-528, 85-537 & 85-538.
Original Rib Style
Powder Coated White
85-560 - 91-1/2" Long
85-563 - 96" Long
85-563 - 96" Front Bumper White
7 Gauge metal bumper is slightly angled and fits
Utilimaster with Freightliner chassis.
85-520 New Style 1/4" steel heavy duty
bumper bracket that fits Ford chassis.
Fits our bumpers; 85-500, 85-560 and
85-563. Replaces old "hat style" bracket.
29-355A - L & R Hood Holddown
Assembly, includes hardware, 1 pair
29-355 - L & R Hood Holddown
Bracket, Hardware Not Included, 1 pr
Fits ALL Utilimaster vehicles.
This old style Ford hat-bracket
is now replaced with 85-520.
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers.
Stepvan 2016.indb 2
7/21/2016 2:12:54 PM
REPLACEMENT PARTS that fit
10" Tall
FRONT BUMPERS
85-588 - 89" Long
4 Mounting holes on face: 30" x 5-1/2" apart
9" Tall
6 Mounting holes on face: center holes 25-1/2" x 6"
apart. End holes 20" from closest hole.
85-550 - 86" Long
85-591 - 91.5" Long
OE Mounting Brackets must be modified.
Black or White
GRIP
STRUT
SURFACE
Freshen up your bumper
with Your Choice of
Touch-Up Paint
7 Gauge metal bumper that
fits Fedex Ground trucks with
International chassis. Bumper
can be shipped UPS.
Fits Grumman, Utilimaster,
Union City Body with
Workhorse/GM chassis.
Bumper can be shipped UPS.
85-591 - 91.5" Front Bumper
Similar to 85-550 but 91.5" long
and not painted.
REAR STEP BUMPERS
Powder Coated
11 oz.
M-1662
M-1663
M-1664
M-1665
M-1666
M-1667
Dull Aluminum
Gloss White
Gloss Black
Ultra Flat Black
Gray Primer,
Sandable
Banner Red
Powder Coated Bumpers
All Bumpers
Made in USA
Built Tough with 1/4" steel side
plates and a 2" x 2" square tube
facing with 3/16" wall thickness to
stand up to the most severe beatings.
Large one foot deep 14 gauge
Grip-Strut Surface for sure foot
placement and safety while allowing
snow and other debris to fall through.
Strong Rubber Impact Strip protects
bumper and truck when backed into
docks.
One Man Installation... Our simple
mounting procedure requires only one
individual for installation.
3
FRONT & REAR BUMPERS
Part No.
Body
Width
Bumper Color
85-778..........78"............ Black
85-782..........82"............ Black
85-786..........86"............ Black
83-183..........86"............White
85-794....... 94-96"......... Black
83-194....... 94-96".........White
Fits Chassis:
• GM
• Workhorse
• Ford
• Freightliner
• International
Bumpers Include: (2) 24" Rubber impact strips
with installation hardware, Reflecti e tape, (2)
mounting brackets with hardware. Does not
include bumper mount plate, see below.
Fits all StepVan Frame
Widths from 35" to 45"
regardless of body width
Order your Bumper
by Body Width
78" - 82" - 86" - 94" - 96"
12"
Deep
Mill Supply bumpers are designed better, built tougher, easier
to install and are a better value for your dollar!
BUMPER MOUNT PLATE
TRU
CK F
TRUCK
RAM
FRAM
E
E
OUR BUMPER
PLATES WELD TO
THE TRUCK FRAME
M-1431-24 - Rubber Impact Strip
2-1/4”x1-3/8” x 24"
BP-1112 - Bumper Plate 11-1/2" Square with 8 holes.
Sold individually & not included with bumper.
Stepvan 2016.indb 3
7/21/2016 2:13:13 PM
4
REPLACEMENT
REAR SPRING BUMPERS
REAR BUMPERS WITH SIDE PLATES
All Bumpers
FOR SPRING MOUNTS
Made in USA
9-1/2"
Deep
Order springs
separately
GRIP
STRUT
SURFACE
86"
or 9
5.5"
Widt
h
Powder Coated
Black
Order springs
separately
86-881
Inner "C"
spring
86-501
Outer spring
86-882
Outer spring
86-502
Inner spring
86-883
Lower spring
mounting box
86-880
Hardware for
spring bumper
Includes:1 Bolt, 1 Nut,
2 Washers & 1 Bushing
(2 needed per vehicle)
2-1/4”x1-3/8”
Rubber Impact Strip
86-503
Mid spring
86-504
Lower mount
bracket
86-880 Bushing
Hardware Kit
Spring Hardware
Spring Hardware
86-882 - Outer spring
86-881 - Inner "C" spring
86-883 - Lower mount box
86-880 - Hardware Kit
86-501 - Outer spring
86-502 - Inner spring
86-503- Mid spring
86-504 - Lower Mount Bkt
86-880- Hardware Kit
(Order separately)
(Order separately)
Spring Mounted Bumpers
86-886 - 86'' Black Bumper with side plates
86-896 - 95.5" Black Bumper with side plates
• 1/4" Steel Side Plates and Spring Mount Surface
• 2" x 2" Square Tube Facing with 3/16" wall thickness
• 9-1/2" deep 14 gauge anti-slip Grip-Strut Surface
• Strong Rubber Impact Strip
• Bumper must be drilled to mount outer spring brackets
All lamps mount in
4-1/2" dia. hole.
Existing Bumper with
Kidneys Built-in
New Bumper with Lights
in Body of Truck
Some older step vans have
lights built into kidneys
on the bumper. Our new
bumpers do not allow for this
but you can purchase lights
and install them directly to
the body of your truck. See
the lights on this page or go
to the lights section of this
catalog for a full selection.
See Lights Section
for full selection!
INCANDESCENT
40042RD......Red light w/grommet &
LED
plug. 3 year warranty
M42322R... LED Red S/T/T light, 9 LEDs
40002RD......Red light w/grommet &
M42323R... LED Red S/T/T w/flang , 9 LEDs
plug, 2 year warranty
M42347...... LED Clear back-up light only
413...............2-Wire red flange moun
9 LEDs
light w/black poly housing
M42324...... LED Clear back-up light only,
413S.............2-Wire red flange moun
grommet mount, 18 LED's
light w/S.S. housing
40700........ Black open back grommet
40004C.
.
.......Clear
back-up light with
94993........ PL3 Right angle plug
grommet
& plug
M-50905.... PL3 Plug with resistor to allow an
SS-4111-W...Stainless steel flang
LED light to use a standard
mount back-up light
flashe
Stepvan 2016.indb 4
7/21/2016 2:13:33 PM
REPLACEMENT
5
LICENSE BOXES & RUBBER BUMPERS
HOLLOW "D" SHAPE BUMPERS
RECESSED LICENSE PLATE BOXES/INSERTS
REPLACES GRUMMAN / MORGAN OLSON
Can be special ordered
in custom lengths with
desired hole pattern.
Height
Length
33-540 - Aluminum License Plate Box
Overall Dim: 18-1/2" x 10-3/8"
Fits in hole: 16-1/2" x 6-3/4"
License light hole size: 1-1/4" (Lights not included)
33-538 - Same as 33-540 with two Incandescent license lights.
33-531 - Aluminum License Plate Box
Overall Dim: 18-1/2" x 10-1/2"
Fits in hole: 16-1/4" x 6-7/8"
33-527 - Plastic License Plate Box
Overall Dim: 17-3/8" x 10-3/16"
Fits in hole: 15-1/2" x 6-3/4"
Replaces existing
rotted-out license
lights
33-553 - LED License light with rubber grommet
eyebrow to direct light to license plate. Includes a
6-1/8" x 2-1/2" aluminum side plate to repair rusted
area. Made for U.C.B.C. Powder coated white. Fits
either side, sold each.
Width
Part No.
Width
Height
Length Hole Centers
M-1258........ 4-1/2".....3-3/4"........12"........ 6"
M-1047......... 4-1/2".....3-3/4".... 13-1/2"..... 7"
M-1078......... 4-1/2".....3-3/4"........18"....... 12"
M-1169......... 3-5/8".....3-1/2"........14"........ 8"
M-1169X...... 3-5/8".....3-1/2"........14".... 10-1/4"
DOCK BUMPERS
671-1041
Dock bumper with 3 mounting
holes, at 6-1/2" centers.
Dim: 16"L x 2-1/2"W x 2"H
75-240
Dock bumper with 3" hole centers.
Dim: 6"L x 3"W x 3-1/2"H
RUBBER BUMPER IMPACT STRIP
Includes bar washer
Bar washer is not drilled,
only rubber is drilled
1111001 - Armored
license light with
bracket. All aluminum
construction, standard
on Grumman/Morgan
Olson.
66-438 - LED 2-wire chrome
license light with 2 screw mount.
Fits in 1-3/4" hole.
70-4817 - Incandescent chrome
1-wire license light.
26-338 - Incandescent chrome
2-wire license light.
263-3331 - This 2-wire license light has
a 2-1/2" x 1-3/4" aluminum flange that
surrounds the lamp. Popular on Utilimasters
with the hole rotted out around the original
light. Light can be snapped out of base to fit a
standard 1-1/4" hole.
SOLID "D" SHAPE
BUMPER
Rubber impact strips can
be special ordered to be cut
and drilled to any length in
quantities of 20 or more
M-1431-24 - 24" Rubber Impact Strip
M-1431-78 - 77-1/2" Rubber impact strip
SINGLE RETRACTABLE STEP
Retractable Step can be bolted or welded to the floor, bumper or
frame. Step is solid with a black powder coat finish.300 l . Wt. Limit.
Overall depth open: 14-1/2", Overall depth closed: 12"
Height closed: 5-1/4", Step depth: 8".
CLOSED
B-4000
8"L x 6"W x 3"H
Half round
dock bumper.
2-7/8"W x 5-3/8"L
hole centers
2-1/4"
66-443 - LED 2-Wire
License light. Snaps in
place and fits in 1-1/4" hole.
66-431 - Incandescent
1-Wire license light that
snaps in place. Fits in 1-1/4"
hole.
1-3/8"
83-920 - 24" Wide Retractable Step
83-934 - 28" Wide Retractable Step
OPEN
Stepvan 2016.indb 5
7/21/2016 2:14:16 PM
6
800-888-5072
RADIATOR & CONDENSER FANS
RADIATOR COOLANT FAN
• MillSupply.com
REVERSIBLE S-BLADE ELECTRIC COOLING FANS
MOUNTS TO RADIATORS AND CONDENSERS
• Lowest profile high-performance,
reversible fan on the market.
• 130/160 watt dust and water proof
sealed motor; can be sprayed and washed.
• Quiet, S-blade design - works as a puller
or pusher of air.
• All glass filled nylon construction.
• Includes mating locking quick disconnect
with 9" pigtail
• Includes (4) 90 degree mounting feet
with rubber spacers and pads.
•Increase Gas Mileage by up to 15%
•Increase Water Pump Life
•Reduce Engine Warm Up Time
•Reversible for push or pull applications
•Mounts on Condenser or Radiator
Measure the Condenser or Radiator
Before Installation and Use the Largest
Fan that will Easily Fit.
CFM and Ampere are shown at "0" static pressure. Tested at 13.5 volts.
Fan Part No.
Diameter
80-509
80-510
80-512
80-514
80-516
9"
10"
12"
14"
16"
Air Type
Current
Draw
790 CFM
950 CFM
1155 CFM
1555 CFM
1810 CFM
7.7 Amps
7.9 Amps
7.7 Amps
10.1 Amps
12.3 Amps
TO MOUNT HOLE
Part No.
80-509
80-510
80-512
80-514
80-516
A
8.11"
10.59"
12.52"
14.45"
15.75"
Fan Assy Dimension
B
C
D
9.72"
5.47" 5.47"
11.20" 5.59" 9.70"
13.23" 6.61" 11.46"
15.04" 7.51" 13.03"
16.30" 8.14" 14.12"
E
2.48"
2.48"
2.48"
2.87"
2.87"
80-501 - Adjustable temperature sensing relay
switch kit
Aluminum Billet Brackets fit
14" and 16" fans
80-539
80-536
80-536 -Billet aluminum universal fan brackets for 14" and 16" fans.
Kit includes: (2) Billet aluminum brackets with 4 adjustable side
angle brackets that attach to the side flange of radiator; (4) bolts,
washers and nylon lock nuts for mounting fan.
Mill Supply carries replacement condenser fans that
mount underneath air conditioned bus vans. These
fans are constantly exposed to road elements that
shorten their life span considerably. Mill Supply
stocks two popular sizes and styles that use a
universal mounting system for a quick replacement
in a variety of applications.
CONDENSER FANS
•12 Volt
•130 Watts
•730 Max CFM
Mount position of fans are shown on the
condenser section of the A/C unit positioned
underneath an E-450 Econoline.
80-539 - Universal metal bracket strips with mount bolts.
Brackets can be bent or trimmed to desired shape and
length. Fits all fans.
Kit includes: (4) 7-1/4" long strap brackets; (4) bolts,
washers and nylon lock nuts.
One fan will replace many existing units with its variety of
mounting positions built into the perimeter of the fan. Measure
your fan diameter before you order.
80-523 - 10" Low Profile
Condenser Fan
Our 10" low profile unit replaces Spal and R vcor fans.
Extends 2-3/8" from the body and uses S-curve blades.
Overall outside diameter is approximately 11". This unit
replaces 10" fans used on TransAir and some AC Carrier
units. Measure your fan diameter before you order.
•12 Volt
•225 Watts
•989 Max CFM
80-527
11" Condenser Fan
This 11" Fan fits C Carrier. This larger
fan extends 3-13/16" from the body and
uses straight blades as shown. Its overall
outside diameter is approx. 12".
Stepvan 2016.indb 6
7/21/2016 2:14:31 PM
ENGINE & TRANSMISSION COOLERS
7
ENGINE AND TRANSMISSION COOLERS
80-944 Transmission oil
80-940 Engine
cooler. Replacement for
1999-2010 Workhorse
Step Vans.
oil cooler.
Replacement for
G.M. step vans.
Core Dim: 11" x 8-3/8" x 1-1/2"
Overall Dim: 20" x 10-1/2"
Cooler Inlet Size: 3/8-18 NPT
Quick Disconnect
Cooler Outlet Size: 3/8-18 NPT
Quick Disconnect
Dim: 8"x11"x1.5"
80-938 Transmission Oil
Cooler that fits 99-2004
Ford E350/E450. Comes
with mounting brackets and
hose fittings.
Dim: 6-1/8" x 13-1/2".
80-942 8"x11"x1.5"
Universal
transmission oil
cooler. Includes
installation kit.
COOLANT OVERFLOW TANKS
Convert "open" cooling systems or replace original equipment.
85-083 Overflow
reservoir with
screw-on cap attaches
directly to fender well or
other body member.
Kit includes: reservoir, cap,
overflow tubing, and mounting
hardware.
Overall Dim: 6"W x 8"H x 4-1/2"D
Coolant Recovery Tank
fits GM/Workhorse
85-090 Overflow
Reservoir for Radiator,
3 quart capacity
85-094
85-092
Front View
85-088
Plastic Surge Tank that
fits 6.5L Diesel GM
85-092 - Coolant recovery tank
(less bracket)
85-094 - Bracket for tank
Back View
85-093
Plastic surge tank for our
radiator 80-886. Fits Freightliner
Stepvan 2016.indb 7
7/21/2016 2:14:54 PM
46
FORD CHASSIS
RADIATORS
Please check dimensions before you order.
5.4 LITER GAS
302/351 C.I. - 5.0/5.8 LITER GAS
POPULAR ON UTILIMASTER BODY
WITH FORD CHASSIS
80-862
5.4 L Gas Engine
Core Dimensions: Aluminum
Inlet Tank: Plastic
Outlet Tank: Plastic
Hose Inlet: Hose Outlet: Oil Cooler: 1997-05
30-1/4"W x 23-5/8"H
2-1/2" x 30-5/16"H
2-1/2" x 30-5/16"H
1-3/4" Top left
1-3/4" Bottom right
12” C-C
80-855
L300 OR CUMMINS 4BT
3.9 LITER DIESEL 1977-88
80-851
L300 or Cummins 4BT
3.9 L Diesel
Core Dimensions:
Inlet Tank: Outlet Tank: Hose Inlet: Hose Outlet: Oil Cooler: Radiators may be:
Alum. Core, Plastic
Tanks or
Copper Core, Brass
Tanks
5.0/5.8L Gas
Front Flange Mount
Core Dimensions: Aluminum
Inlet Tank: Plastic
Outlet Tank: Plastic
Hose Inlet: Hose Outlet: Oil Cooler: 1977-91
26-1/4"W x 19-1/4"H
3" x 26-3/4"H
3" x 26-3/4"H
1-1/2" Top left
1-3/4" Bottom right
12” C-C
5.4LITER V8 & 6.8LITER V10 GAS
1977-88
22-7/16"W x 18"H
3" x 26-7/8"H
3" x 26-7/8"H
1-1/2" Top right
1-3/4" Bottom right
12” C-C
80-874
5.4L V8 & 6.8L V10 Gas
Ford E450
Core Dimensions:
Inlet Tank: Outlet Tank: Hose Inlet: Hose Outlet: Oil Cooler: 2005-2013
23-5/8"W x 29-3/8""H
3" x 30-7/16"H
3" x 26-3/8"H
1-3/4" Top left
1-3/4" Bottom right
12” C-C
Stepvan 2016.indb 46
7/21/2016 2:25:54 PM
ENGINE &
TRANSMISSION COOLERS
80-938 Transmission Oil Cooler, that fits 99-2004
FORD CHASSIS
47
BATTERY TRAY
87-425
Battery Tray
Ford E350/E450. Comes with mounting brackets
and hose fittings. Dim: 6-1/8x13-1/2.
COLUMN SHIFT TUBE REPAIR KIT
89-570 - Steering
Column Shift Tube
Repair Kit. When
your column shift
tube is broken
your column shifter will be loose with no tension and will limit
your shifting to 1 or 2 positions if any at all. This shift tube
replaces the 97-on E Series Stepvans and 99-on F-Series
Trucks. Replaces OE Numbers F57Z-7212-A, F3TZ-7L278A,
F7D-7R264-AA.
HORNS
Single or Dual Terminal Horn
Hardware Includes: strip bracket,
pigtail, screws and nuts.
87-040 - 12 volt Horn, High note, 125 decibels
87-043 - 12 volt Horn, Low note, 125 decibels
EMERGENCY BRAKE HANDLE & CABLES
10-970 - Parking Brake Handle for
single or dual rear wheel
10-535 - 84-91 Emergency Brake
Cable, Mounts to handle in cab,
(for vehicles with 158" wheelbase)
replaces Napa #93753
10-536 - 84-91 Emergency Brake
Cable, Mounts to handle in cab,
replaces Napa #93285 (for vehicles
with 138" wheelbase)
10-531 - 80-91 Left Emergency Brake
Cable at rear drum, replaces Napa
#93210
10-532 - 80-91 RightW Emergency
Brake Cable at rear drum, replaces
Napa #93209
7/21/2016 2:26:13 PM
48
FORD CHASSIS
STEERING LINKAGE that fit
fits 1975-1991 FORD E350 1-TON
Passenger Side
Driver Side
89-569
89-571
89-561
89-551
89-553
89-563
89-532
89-562
89-554
STEERING LINKAGE
Part #
Description
Side
Thread Dia.
Length
Year
89-571.....Right Drag Link Assembly....................Pass..........................................43".............75-2/88
89-551.....Right Outer Tie Rod End......................Pass................... 1".................. 5.39"............2/88-91
89-561.....Left Outer Tie Rod End.......................Driver.................7/8"................ 4.88"............1977-91
89-553.....Right Inner Tie Rod..............................Pass................... 1"................. 36.97"...........2/88-91
89-563.....Left Inner Tie Rod End........................Driver.................7/8"............... 18.25"...........1977-91
89-532.....Right Adjusting Sleeve.........................Pass................... 1"................... 5.5".............2/88-on
89-562.....Left Adjusting Sleeve..........................Driver.................7/8"................. 4.5"............ 1975-91
89-554.....Steering Stabilizer (units with steering linkage in front of axle)............................. 1975-91
89-569.....Pitman Arm (Units with Power Steering).................................................................2/88-91
FRONT SUSPENSION that fit
fits 1975-91 FORD E350 1-TON
89-721
Part #
Radius Arms No
Longer Available
Cast
89-690
Steel
89-713
89-714
King Bolt Set
Description
Year
89-710... King Bolt Set, Metal 1.054" x 6.69".............................1975-91
89-713... Axle Pivot Bushing - 5/8" Bolt x 1.762" O.D................1975-on
89-714... Axle Pivot Bushing - 5/8" Bolt x 1.702" O.D................1975-on
89-668... Left Radius Arm Bracket.............................................1980-91
89-669... Right Radius Arm Bracket..........................................1980-91
89-721... Radius Arm Bushing Kit, One front end set................1975-77
fits cast iron arm
89-690... Radius Arm Bushing Kit, One Front-End Set ............1978-on
Stamped steel
89-725... Sway Bar Link Kit with Link.......................................1975-91
89-727... Sway Bar Link Repair Kit without Link......................1975-91
89-731... Mount Bushing w/1" bar, exc. 158" & 176" w/base.....1975-91
89-756... Threaded end rod for radius arm. Must be welded.....1975-91
Hyper-Flex Polyurethane Bushings
that fits Ford E-Series 1975-91
Sway Bar Link Kit
89-710
With bayonet style
end link
89-725
Radius Arm Brackets
89-668
89-669
Sway Bar Repair Kit
89-727
Bushing sets
include two sway
bar bushings for
existing brackets,
four bushings with
two sleeves for
eye ends and
four grommets for
bayonet style end
links.
Sway Bar
Diameter
To determine the correct set,
measure the height of your
sway bar bushing and follow
this chart.
2 1/2" Tall
Bushing Set
5/8"
-------
3/4"
-------
7/8" 89-671
1"
89-672
1-1/8" 89-673
2" Tall
Bushing Set
89-674
89-675
89-676
89-677
89-678
7/21/2016 2:26:17 PM
FORD CHASSIS
STEERING LINKAGE that fit
fits SINGLE & DUAL WHEEL
1992-ON E350/E350SD/E450SD/E550SD
Passenger Side
49
Driver Side
89-533
89-537
89-532
89-531
89-543
89-542
89-526
89-541
STEERING LINKAGE
Part #
Description
Year
89-531....Right (Pass Side) Outer Tie Rod End, Single/Dual rear wheel, 1" thread................................ 1992-on
89-541....Left (Drivers Side) Outer Tie Rod End, Single/Dual rear wheel............................................... 1992-on
89-533....Right (Pass Side) Inner Tie Rod End, Single Wheel only....................................................... 1992-on
89-537....Right (Pass Side) Inner Tie Rod End, Dual Wheel only.......................................................... 1992-on
89-543....Left (Drivers Side) Inner Tie Rod End, Single/Dual rear wheel................................................ 1992-on
89-532....Right (Pass Side) Adjusting Sleeve, Single/Dual rear wheel, 1" thread x 5.5" long .................2/88-on
89-542....Left (Drivers Side) Adjusting Sleeve, Single/Dual rear wheel, 22mm thread .......................... 1992-on
89-524....Steering Stabilizer, Single Wheel only (not shown)................................................................ 1992-95
89-526....Steering Stabilizer, Dual Wheel only...................................................................................... 1992-on
FRONT SUSPENSION that fit
fits 1992-ON FORD E350 1-TON
WHY EXTREME-DUTY BALL JOINTS?
89-766
89-690
89-713
89-714
Grease fitting or
prolonged service life.
One piece forged
steel housing
89-695
Part #
89-872
Description
Dichromate
coating for long
term corrosion
resistance
Patented two piece,
• Outperforms OE
cylindrical wedge bearing
and competition
for best fatigue/wear
• Restores that like
resistance
Full ball, low
friction design
89-696
89-698
Patented, advanced technology such as low friction fully
encapsulated polymer bearing designs makes Extreme-Duty
Ball joints the right replacement for applications where the
need for severe-duty durability is absolute. Cold formed, heated
treated studs provide superior strength, durability and stability,
polyurethane boot resists cracking and splitting.
Cold-formed, heattreated stud for
superior strength
and durability
new “handling”
• Bearing design
means no spring.
No spring means
no end play
• No high torque,
high friction metal
on metal.
34-900 Front Shock
Year
89-766.....Ball Joint, Upper Control Arm, Single and Dual wheel, Extreme Duty...................................................................1992-on
89-872.....Ball Joint, Lower Control Arm, Single and Dual wheel, Extreme Duty...................................................................1992-on
89-713.....Axle Pivot Bushing, 5/8" Bolt x 1.762" O.D. Single wheel , sold each....................................................................1975-on
89-714.....Axle Pivot Bushing, 5/8" Bolt x 1.702" O.D. Single wheel , sold each....................................................................1975-on
89-690.....Radius Arm Bushing Kit, Single & Dual wheel, 10 piece kit for both sides.............................................................1978-on
89-695.....Sway Bar Mount Center Bushing - With 1" Bar To Frame, Single/Dual wheel.......................................................1992-on
89-696.....Sway Bar Mount End Bushing - To Axle, Single/Dual wheel, rubber w/steel surround, (One Axle Set).................1992-on
89-698.....Sway Bar Mount Center & End Bushing - To Axle, Single/Dual wheel, Polyurethane, (One Axle Set)..................1992-on
34-900.....Front Shock, 18" extended length; 1/2" eyelet; 3/8" stud; includes nut, retainers and bushings.............................1992-on
7/21/2016 2:26:21 PM
50
FORD CHASSIS
FUEL TANKS & SENDING UNITS that fifit FORD E350 CHASSIS
1975-85
1988-91
1986-87
C
B
A
F
E
G
A......... 91-75-110......22 Gal, Fuel Tank, 75-85 E350, rear mount with small 2" sender gauge hole,
vent pipe toward front
B......... 91-86-113......22 Gal, Fuel Tank, 86-87 E350, rear mount with large 3-5/8" sender gauge hole
C......... 91-88-115......22 Gal, Fuel Tank, 88-91 E350, rear mount with large 3-5/8" sender gauge hole
D......... 81-970...........Fuel Sending Unit only, 1986-91 E-Series, requires harness plug 43-542 (picture E)
E......... 43-542...........Repair Harness Plug for 81-970 Sending Unit, used with 81-970 sending unit
F......... 91-75-112......Upper Fuel Tank Strap, Pair
G......... 81-940...........Lower Fuel Tank Strap, Each
H......... 81-960...........Rubber insulation for gas tank straps, 10 ft length
K......... 81-834...........Vent Hose, Flex, 3/4" I.D. x 36"
K......... 81-998...........Filler Hose, Flex, 2" I.D. x 36" Fits 91-75-112, 91-86-113, 91-88-115
L......... 81-991...........Diesel Fuel Filler Neck, 2" dia. neck w/3/4" vent tube, Fits E350 with Grumman Body.
M......... 81-967...........Unleaded Fuel Filler Neck, neck reduces down to 1-1/2" dia. and has 3/4" vent tube,
Fits 97-on E350/450 with ground tab. Popular on Morgan Olson & Utilimaster Body.
*Pre.vent® minimizes fuel expulsion
when cap is removed
K
L
M
FUEL CAPS
pre.vent®
81-901 - Non-Locking Gas
Cap with Pre-vent®,
'80 - '96 E350 with threaded
filler ne k, 4.9L
D
H
pre.vent®
81-903 - Locking Gas Cap
with Pre-vent®,
'80 thru '07 E350 with
threaded filler ne k, 4.9L
81-904 - Non-Locking
Gas Cap '80 - '96
E350 without threaded
filler ne k, 4.9L
81-905 - Locking Gas
Cap, '80 - '96 E350
without threaded filler
neck, 4.9L
81-907 - Non-Locking Gas Cap
81-843 - Locking Gas Cap
97 - '05 E350 & E450 without
threaded filler ne k.
EXHAUST MANIFOLD KITS
A
B
C
D
E
A....57-340.... Exhaust manifold kit that fits Ford E350, 6 cyl. 4.9L 300 CID, includes: 2 studs, 2 nuts, 1 flange.
B....57-345 ... Exhaust manifold kit that fits Ford E350, 6 cyl. 4.9L 300 CID. Includes: 2 nuts, 2 studs, and a flange.
C....57-347.... LH Exhaust manifold kit that fits ord E350 & E-Super Duty, 8 cyl. 5.4L 330 CID. 1997-on, Inc: 2 studs, 2 nuts, 1 gasket.
D....57-349.... RH Exhaust manifold kit that fits ord E350 & E-Super Duty, 8 cyl. 5.4L 330 CID. 1997-on, Inc: 2 studs, 1gasket.
E....57-393..... Manifold studs, set of 10.
7/21/2016 2:26:26 PM
FORD CHASSIS
51
ALUMINIZED EXHAUST SYSTEM
that fit
fits FORD E350/E450 with 5.4L ENGINE
MILL SUPPLY'S EXHAUST SYSTEM SHOWN
INSTALLED IN FRONT OF THE REAR WHEEL.
CONVERT YOUR EXHAUST SYSTEM FROM EXITING BEHIND
THE REAR WHEEL TO IN FRONT OF THE REAR WHEEL
CATALYTIC CONVERTER SHOWN INSTALLED
57-213 - 55" x 3"dia. Aluminized
Extension Pipe. Cut to desired length.
57-220 - Aluminized
Muffler, 3" dia. Inlet
and Outlet
57-286 - Aluminized
Tail Pipe,
36" x 10" x 3" Dia.
57-218 - Replacement
Catalytic Converter for
gas engines. Ford 5.4L.
Catalytic Converters are not approved
for use in California or New York
557-166 - Chrome Exhaust
Tip, 3" dia. x 12" long.
57-437
57-268 Universal Exhaust
Pipe Hanger. Can be bolted or
welded to frame. 1/2” Dia.
57-433
USE EXISTING
HOLE IN FRAME
TO MOUNT
UNIVERSAL
BRACKET
Insulator
Hanger
Universal Pipe Hanger. Heat
this 1/2" dia. x 11" rod and
bend it around pipes or
mufflers and weld on. Or use
two, one welded to the frame
and one welded to the muffler
pipe. Use the insulator hanger
(57-433) in-between.
Our heavy-duty pipe hanger system can be bolted or welded on
the frame of the vehicle. Add the reinforced rubber insulator and
our universal straight pipe hanger for a simple solution to annoying
brackets that continually break.
7/21/2016 2:26:32 PM
52
FORD CHASSIS
FRONT DISC BRAKE HARDWARE
REAR DISC BRAKE HARDWARE
FRONT CALIPERS & PADS that fits 1996-07 FORD
E450 STEP VANS w/ DUAL REAR WHEELS
REAR CALIPERS & PADS that fit
fits 1996-07 FORD
Check your Casting # before ordering
Check your Casting#
before ordering
D-411
No
Core
Charge
10-571
D-655
10-574
No
Core
Charge
D-802
10-871
10-573
Length
5-15/32"
10-570
Popular on Utilimasters with Ford Chassis
10-570 - Left Front Brake Caliper (Casting # on caliper KH12795101)
10-571 - Right Front Brake Caliper (Casting # on caliper KH12795101)
D-655 - Front brake pad set (includes shims) 1996-07
FRONT ROTOR & HUB that fit
fits 1996-07 FORD E450
STEP VANS w/ DUAL REAR WHEELS
10-747
FRONT BEARINGS & RACE that fit
fits 1996-07 FORD
10-741
REAR ROTOR that fit
fits 1996-07 FORD E450
SUPERDUTY W/ DUAL REAR WHEELS
10-749 Rear Rotor, fits 96-07 E450 Super
Duty w/dual rear wheels, fits Ford chassis
with Utilimaster body. Uses brake pad
D411; Uses Caliper 10573/10574 with
drive line parking brake.
10-747 - Front Rotor with Hub with exciter ring,
w/dual rear wheels, 4- wheel anti-lock brakes, fits
1996-07 E450 Ford chassis with Utilimaster
Body. Uses brake pad D655;
Uses Caliper 10570/10571
10-782 - Front wheel stud, 9/16"-18 x 2-5/32"
10-789 - Lug Nut, 9/16-18 thread
10-740
10-573 - Left Rear Brake Caliper (Casting # on caliper KH12068401)
10-574 - Right Rear Brake Caliper (Casting # on caliper KH12068401)
D-411 - Rear Brake Pad set, fits trucks (with drive line brakes at
rear of transmission) E450
D-802 - Rear Brake Pad set, fits trucks (with emergency cable at rear rotor) E350 SuperDuty
10-871 - Brake Hardware Kit
10-744
10-729
10-740 - Front Inner Bearing & Race, 1975-07
10-741 - Front Outer Bearing, replaces NAPA # 15101; 1977-07
10-744 - Front Outer Race, replaces NAPA #15245; 1977-07
10-729 - Front Wheel Seal, replaces NAPA #4160; 11/80-07
FRONT & REAR ROTORS that fit
fits 2008-12 FORD
10-754 Rear Rotor, fits 96-on E450 Super
Duty w/dual rear wheels, fits Ford chassis
with built-in emergency brake drum, with cables at rear
wheel. Uses brake pad D802.
10-749
10-754
10-788 - Rear Wheel Stud 9/16-18 x 3-9/32, fits 10-749
10-790 - Lug Nut with cone flange washer, 9/16-18
REAR BEARINGS AND RACE that fit
fits 1996-07
FORD E450 STEP VANS w/ DUAL REAR WHEELS
10-755
10-736
10-737
Rear Wheel Seal
Inner Bearing and Race. Replaces Napa # 387AS/382A
Outer Bearing & Race, Replaces Napa # A-38
10-755
10-736
10-737
D-1328
D-1330
10-529
10-718
10-529 - Front Rotor and Hub Assy with ABS, 2008-11
10-718 - Rear Rotor, Outer Dia:13.583" Height: 4.593", 2008-12
D-1328 - Front Brake Pad Set, E350/450 SD 2008-12
D-1330 - Rear Brake Pad Set, E450 SD 2008-10
7/21/2016 2:27:04 PM
FORD CHASSIS
BRAKE HARDWARE that fit
fits 2008-ON FORD F59
D-1066 - Brake Pad, Front and
Rear, 18,000 to 22,000 lbs GVW.
10-223 - Rotor, Front or Rear,
18,000 to 22,000 lbs GVW.
10 Bolt; Bolt Circle: 163mm
O.D.:15.55"; Height: 4.87"
53
89-003 - Stemco Kiaser Qwik Kit
King Pin Set. 1.430 dia. x 8.25"
length. Fits 1989-2003 Ford F650
89-016 - Stemco Kaiser Qwik Kit
King Pin Set. 1.359 dia. x 7.97
length. Fits 2004-2010 Ford F650
EMERGENCY DRIVE LINE BRAKE PARTS that fit
fits up to 2002 FORD E450 & F450
MOUNTED ON REAR OF TRANSMISSION
10-807
Spring Set
D-646
3"
Brake Shoes
10-941 - Drive Line
Brake Assembly
10-647
Seal
9”
10-941 - Drive Line
Brake Assembly
10-645
Outer Bearing
10-646
Outer Race
Visit us onlin
e for more
detailed illustr
ations!
D-646 - Drive Line
Emergency Brake Shoe
Set, 9” x 3”. Fits Ford E
and F Series.
SD-647 - Drive Line Emergency
Brake Shoe Set, 9” x 3”. Fits Ford,
Freightliner, Custom Chassis,
Chevrolet, GM, Oshkosh, John
Deere & International.
10-641......Inner Bearing
10-642......Inner Race
10-645......Outer Bearing
10-646......Outer Race
10-647......Seal
EMERGENCY BRAKE CABLES
TO REAR WHEEL that fit
fits FORD E450
10-649
10-648 O-Ring
Seal
10-641
Inner Bearing
10-642
Inner Race
10-648......Seal
10-649......O-Ring
D-646........Brake Shoe Set
SD-647.....Brake Shoe Set
10-807......Spring Set for Brake Assy
DRIVE LINE PARTS that fit
fits E350 & E450
10-243 - Parking Brake Cable, Overall Length: 57".
Housing length: 48". Fits Ford E450
89-903 - Universal Joint,
A-Dim: 4-3/16", 4 Bearing.
Trade No. 330. Uses an
external snap ring. Fits E450,
for all three locations. Also
fits Utilimaster with Ford
chassis.
10-244 - Parking Brake Cable, Overall length: 97-3/4".
Housing length: 89-5/16". Fits Ford E450
89-901 - Universal Joint, E350, A-Dim: 3-3/16",
Trade No. 369
89-904 - Universal Joint, E350, A-Dim: 4-3/16",
2 Bearing. Trade No. 427
"A" DIM.
89-922 - Carrier
Bearing (1.5748 I.D.)
(Drive shaft center
support) Fits E450
and Utilimaster with
Ford chassis.
7/21/2016 2:27:11 PM
54
FORD CHASSIS
FRONT & REAR WHEEL BOLTS / LUG NUTS
that fi
fit FORD E350 CHASSIS
Single Wheel
Lug Nut
Dual Wheel
Lug Nut
Dim: 1-1/16"wide x 5/8"tall Dim: 1-1/16"wide x 15/16"tall
10-791 9/16"-18 Lug nut,
Dual Rear Wheels,
1975-1/84, RH Thread
10-789 9/16"-18 Lug nut,
Dual Rear Wheels,
1975-1/84, LH Thread
Rear Lug Bolts
10-788 Rear Lug Bolt,
9/16"-18 x 3-9/32", Dual Rear
Wheels, 1/84-1989
with 12 x 3-1/2" rear drum and
with 12-1/8" x 3-1/2" rear drum
10-787 Rear Lug Bolt,
9/16"-18 x 3-1/4", Dual Rear
Wheel Stud, 1/84-1989, with
12" x 3" rear drum
5400776 9/16"-18 Lug nut, RH Thread
5400792 9/16"-18 Lug nut, LH Thread
89-216
16" x 6" Steel Wheel Rim,
Single wheel, 8 lug
89-217
16" Steel Wheel Rim, 8 lug
8 round hand holes
Popular on Utilimaster Body
with Ford chassis.
10-790 Lug Nut with Cone Flange
Washer, 9/16"-18 Flange nut,
1-1/16" Hex head, 1984+, fits front
and rear wheels
Front Lug Bolts
89-200
89-228
10-784 Front Lug Bolt,
9/16"-18 x 2", 1975-81, Front
wheel, (with DRW)
Inner dual valve
extension kit,
2 hoses with 2
wire stabilizers
Nickel plated 1-5/8" valve
stem, TR# 416. Fits hole
of 5/8" & 29/32". Rubber
grommet forms seal when
compressed by hex nut. Fits
all wheels above.
WHEEL SIMULATORS that fifit FORD
10-798 RH Rear Lug Bolt,
9/16"-18 x 2-25/32", Single &
Dual Rear Wheels, 1973-1/84
10-799 LH Rear Lug Bolt,
9/16"-18 x 2-25/32", Single &
Dual Rear Wheels, 1973-1/84
RIMS that fifit FORD
10-795 Front Lug Bolt,
9/16"-18 x 2-1/2", 1975-97, Front
wheel (Except 75-1/84 w/DRW)
Dresses up your step van at a fraction of the cost of
new wheels. Stainless steel. Lifetime warranty.
89-365
'841/2 - '91, 16" Dual Wheel,
8 Lug, 1-1/16" lug nut covers
REAR SUSPENSION COMPONENTS
that fi
fit FORD E350
•Bolts on without removing wheel
•Does not violate chassis manufacturer's warranty
89-350
'99-On, 16" Dual Wheel, 8 Lug
10-557
•Under-the-lug installation for secure mounting
•Polished stainless steel for lasting durability
10-550
10-668
10-553
10-557 - Shackle Hanger,
front of rear (New holes must
be drilled in chassis)
10-550 - Shackle Hanger,
rear of rear
10-553 - Shackle Kit for rear
leaf spring
10-668 - U-Bolt, Round Bend
5/8 bolt, 10.5"L x 3.5"Inside
89-367
16" Dual Wheel,
Made for wheel 89217 with 8
Lug and 8 round hand holes.
Fits Utilimaster Body with
Ford Chassis.
34-900 - Front Shock,
Top Mount: 7/16" Stud, Bottom
Mount: 1/2", Ext. Length: 17.19",
Collapsed: 11.16"
34-901 - Rear Shock,
Top Mount: 3/8"stud, Bottom
Mount: 1/2", Ext. Length: 23.32",
Collapsed: 14.04"
3 Year Limited Warranty
•Bolts on without removing wheel
•Does not violate chassis manufacturer's warranty
7/21/2016 2:28:10 PM
FRONT AIR HELPER SPRINGS FOR
STEPVANS BY FIRESTONE
Coil-RiteTM
4101 - Coil-RiteTM Kit that fits FORD E-350 Chassis thru current
year. Pre 1991 may require tailpipe modification .
89-406 - Replacement Air Bag Only (sold each) fits FORD
FORD CHASSIS
55
ENGINE & TRANSMISSION MOUNTS
that fi
fit FORD E350 with 300 C.I. ENGINE
87-120
Left Engine
Mount, 77-84
87-121
Right Engine
Mount, 77-84
OIL PANS that fifit FORD
85-211 - Oil Pan with Drain Plug, 1983-96
L-6 300ci (4.9 liter) Van E150/250/350;
Pickup F-100/150/250/350
Gasket not included
85-111 - One Piece Gasket
12"W x 29-1/2"L
85-213 - Oil Pan with center Drain Plug,
V8, 420 (6.9L) and 445 (7.3 liter) Diesel
Vans E250, E350;
Pickup F-250, F-350, Super Duty
Gasket not included
85-218 - Oil Pan with Drain Plug and with
threaded hole for dipstick tube, E350 with
L6, 300 c.i., 4.9L engine,
Gasket not included
OIL FILL CAPS
2469
87-123
Right Engine
Mount, 85-95
87-122
Left Engine
Mount, 85-95
Engine Mount that
fits Cummins 4BT
with Ford E350
chassis.
2448
Transmission
Mount, Fits E350,
Oshkosh and
John-Deere
87-187
Transmission
Mount
PEDAL PADS
11-125 Brake & Clutch
Pedal Pad that fits ord
and Freightliner;
2-1/2"W x 3-7/8"H
85-816 - Twist on Cap
85-815 - Threaded Cap
11-126 Emergency
Brake Pedal Pad that fits
Ford; 2-1/16"W x 2-1/4"H
ACCELERATOR CABLE
54-920 - 62" Accelerator Cable. Fits Ford 300 Gas Engine and
Cummins 4 BT Diesel Engine. Replaces (OEM#E4UZ-9A758C)
SPARK PLUG IGNITION COIL
11-129 Pedal Pad that fits
Ford; 3-1/4"W x 2-1/4"H
11-128 Brake Pedal
Pad that fits ord PU and
E350; 4-5/8"W x 2-1/4"H
CLUTCH SPRING & FORK that fit
fits FORD E350
54-850 Clutch Spring,
15" long. Replaces E350
(OE#D5UZ7523A)
87-400 - Spark plug ignition
43-624 - Ignition coil repair
coil that fits 1997-On 5.4 Liter.
harness for 87-400
89-720 Clutch Release Fork
Replaces E350 (OE#E42Z7515C)
7/21/2016 2:28:29 PM

For some of the best Stepvan Creations check out our

Transcription

Similar documents

compact wheel loaders

suzuki boulevard s40

2014 valkyrie - Honda Powersports

KYMCO Grandvista 250

Type G - Deronda

For some of the best Stepvan Creations check out our

Alterra 500 XT » Arctic Cat

install instructions

11 Knowsley Drive, Swinton, Manchester £235,000

41 Lower Green Lane, Astley, Manchester £159000