Accurate Screw Machine Product Catalog

Transcription

Accurate Screw Machine Product Catalog
ASMInsertR1_ASMInsertR1 10/28/10 11:53 AM Page 2
LOW-PROFILE SPRING-LOADED
CAPTIVE PANEL FASTENERS
STANDARD
Adding to our already extensive product line, Accurate Screw Machine (ASM)
now offers Low-Profile, Spring-Loaded Captive Panel Fasteners!
These Spring-Loaded Captive Panel Fasteners will secure your panel cover
ensuring no more lost screws, and they are manufactured to the same high
quality standard you’ve come to expect from ASM. These fasteners are RoHS
compliant and available in thread ranges from 4-40 through 1/4-20 (standard)
or M3, M4, M5 and M6 (metric). Best of all, they are available in small or
large quantities, and your order is always in stock and available for
immediate turnaround.
METRIC
Contact us today for more information about ASM’s new Low-Profile
Spring-Loaded Captive Panel Fasteners or any of our other fastener lines,
or to request a copy of our printed full line catalog.
Retainer
Screw
Spring
Material
Finish
Carbon Steel
Carbon Steel
300 Series Stainless Steel
Bright Nickel over Copper Flash
Bright Nickel over Copper Flash
Self-Finish
NOTE: The line on the metric knurl is to differentiate between
metric and unified thread size.
STANDARD (inches)
Basic Part
No.
Thread
Size
A
(Shank)
Max.
Min.
Sheet
Thickness
C
Max.
B1
Nom.
B2
Max.
D
± .010
E
± .005
F
± .015
570
571
572
573
574
575
576
577
578
579
580
581
582
#4-40
#4-40
#4-40
#6-32
#6-32
#6-32
#8-32
#8-32
#8-32
#10-32
#10-32
#10-32
1/4 - 20
0.030
0.038
0.058
0.030
0.038
0.058
0.030
0.038
0.058
0.030
0.038
0.058
0.058
0.030
0.040
0.060
0.030
0.040
0.060
0.030
0.040
0.060
0.030
0.040
0.060
0.060
0.202
0.202
0.202
0.218
0.218
0.218
0.249
0.249
0.249
0.311
0.311
0.311
0.374
0.595
0.595
0.595
0.595
0.595
0.595
0.600
0.600
0.600
0.605
0.605
0.605
0.675
0.325
0.325
0.325
0.325
0.325
0.325
0.330
0.330
0.330
0.335
0.335
0.335
0.385
0.406
0.406
0.406
0.438
0.438
0.438
0.468
0.468
0.468
0.530
0.530
0.530
0.625
0.202
0.202
0.202
0.202
0.202
0.202
0.207
0.207
0.207
0.220
0.220
0.220
0.242
0.300
0.300
0.300
0.300
0.300
0.300
0.300
0.300
0.300
0.300
0.300
0.300
0.350
A
(Shank)
Max.
Min.
Sheet
Thickness
C
Max.
B1
Nom.
B2
Max.
D
± .25
E
± .13
F
± .40
0.97
1.48
0.97
1.48
0.97
1.48
1.48
1.00
1.50
1.00
1.50
1.00
1.50
1.50
5.48
5.48
6.38
6.38
7.98
7.98
9.48
15.11
15.11
15.24
15.24
15.37
15.37
17.15
8.26
8.26
8.38
8.38
8.51
8.51
9.78
10.31
10.31
11.89
11.89
13.46
13.46
15.88
5.13
5.13
5.26
5.26
5.59
5.59
6.12
7.62
7.62
7.62
7.62
7.62
7.62
8.89
METRIC (millimeters)
Basic Part
No.
591
592
593
594
595
596
597
Thread
Size
M3
M3
M4
M4
M5
M5
M6
x
x
x
x
x
x
x
0.5
0.5
0.7
0.7
0.8
0.8
1.0
Accurate Screw Machine
a Division of MW Industries, Inc.
Phone 877-285-2181 • Fax 973-244-9177 • www.accuratescrew.com
BACK
1-888-208-2008
TABLE OF CONTENTS
Fax (973) 244-9177
www.accuratescrew.com
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . .1
Washers . . . . . . . . . . . . . . . . . . . .198-243
EZ Order Instructions . . . . . . . . . . . . . . . .2
Nuts and Bushings . . . . . . . . . . . .244-254
Pictorial Table of Contents . . . . . . . . . .3-6
Miscellaneous Components . . . . .255-259
Standoffs and Spacers . . . . . . . . . . . .7-91
Handles
Locking Fasteners . . . . . . . . . . . . . .92-108
Material and Technical Specs . . . .275-287
Screws
Part Number Index . . . . . . . . . . . . . . . .288
. . . . . . . . . . . . . . . . . . . .109-189
Retainers . . . . . . . . . . . . . . . . . . . .190-197
Accurate Screw Machine, Corp. (ASM) products are sold with the
understanding and on condition that the purchaser will test them in actual
use and make his o wn determina tion as to their suitability and
acceptability for his intended use, and the purchaser a grees to such
condition. Use of ASM products other than for a pplications illustra ted
herein constitutes a misuse for which the purchaser bears all
responsibility.
ASM warrants to the original purchaser only tha t ASM products, when
purchased in the original, unopened, ASM brand packa ge, are to be free
from defects in ma terials and workmanship. ASM’s sole obliga tion, and
purchaser’s sole remed y, for an y breach of this warranty is limited to
repair or replacement of the product at ASM’s option. ASM shall not under
any circumstances be liable for the loss of the use of a purchaser’
s
. . . . . . . . . . . . . . . . . . . .260-274
WARRANTY
equipment or facilities, or for loss of an y business or goodwill or profits,
or for cost of inspection, transportation or storage, or for any incidental or
consequential dama ges of an y na ture or description. Purchaser must
notify ASM in writing of an y products which are deemed to be defective
within 30 days after receipt of such products.
ASM reser ves the right to transfer an
purchase order.
y right and obliga tion of an y
ASM expressly disc laims an y and all expressed or implied warranties
concerning its products inc luding, without limitation, warranty of fitness
for a particular purpose and warranty of merchantability
, except the
warranty set forth above.
Dedication to Complete Customer Satisfaction
ASM continues to lead the way in the component fastener industr y because we listen to the needs
of our customers and respond to ensure these needs are met. As a result, ASM offers our customers:
The largest inventory and product selection in the industry , with many available in
standard or metric sizes.
Unparalleled service, with stock part orders shipped the same day and custom parts
delivered in one week or less.
Exacting quality standards which include full QC certification, registration to ISO
9001/2000, and a top performance rating from every major OEM in the country ,
including the US Military and NASA.
The widest range of product reference tools available in the marketplace, including a
comprehensive printed catalog, an interactive CD-ROM, and a state-of-the-art W eb site
with on-line technical support.
No matter what your industr y requirements, ASM is
“The Source” for your entir e hardware fastener needs.
1
1-888-208-2008
EZ ORDER INSTRUCTIONS
Fax (973) 244-9177
www.accuratescrew.com
This overview illustrates how to easily and accurately create a valid ASM part number by following the instructions listed in the
“ORDER EXAMPLE” box located on ALL product pages of the catalog.
EXAMPLE: Suppose you want to specify a male-female threaded standoff, stainless steel, with a 1/4" diameter hex bod y, a
6-32 thread, .250" body length with a passiva te finish.
Go to our Pictorial Table of Contents, beginning on the next pa ge, and find the correct corresponding product pa ge (which for
our example is page 27 for male-female threaded standoffs), then follow the step-by-step instructions belo w:
Step 1
Choose the “Basic Part Number” from the part number chart on the product pa ge tha t most c losely ma tches the standard
dimensions for the part you require. Document your choice (from our example a 1/4" diameter standoff with a 6-32 thread)
which corresponds with ASM “Basic Part Number” 14040. NOTE: The default external male thread length (B) is 3/8"
and the internal female thread length (A) is 3/8". See Thread Chart on product page for def ault thread lengths.
Step 2
Choose from the available standard body styles – Hex (H), Round (R) or Square (S) – from the choices offered on the product
page. Add your choice (from our example, H for Hex) after the “Basic Part Number” as follows:
14040-H
Step 3
Choose an available material for this product using the “Materials” chart located on the product pa ge. Add your choice (from
our example SS for Stainless Steel) to the part number as follo ws:
14040-H-SS
Step 4
Indicate the length (L) of the standoff bod y, which in most cases, has no specific limitations unless indicated otherwise. Add
the length (from our example, .250") to the part number as follo ws:
14040-H-SS-.250
Step 5
Lastly, choose a finish code from the table on pa ge 277. Add this code (from our example, 12 for passivate finish) to
complete the part number as follo ws:
14040-H-SS-.250-12
ORDER EXAMPLE:
Step 1
Step 2
14040 - H
Basic
Part
Number
Hex (H) or
Round (R)
or Square (S)
Step 3
-
Step 4
Step 5
SS - .250 - 12
Material:
See material chart
Length:
Fill in your length,
any increment
Finish:
See page 277
If a dimension or thread change is required for A or B, add changes to part # as follows:
14040-H-SS-.250-12 (B=4-40 x 3/8)
Note: Be sure that thread and length are specified.
IMPORTANT NOTE: This part number
example is intended to illustra te the general
step-by-step sequence by which ASM part
numbers are created. However, please be
sure to reference the “ORDER EXAMPLE”
box located on the specific product pa ge for
other requirements or details pertinent to
that specific part.
Additional questions? Please contact sales at
888-208-2008 or sales@accuratescrew.com
2
1-888-208-2008
Fax (973) 244-9177
www.accuratescrew.com
PICTORIAL TABLE OF CONTENTS
BUSHINGS
Bushings ......................................................................250-254
LOCKING FASTENERS
NUTS
Blind ....................................................................................248
Cap, Nylon ...........................................................................247
Hand (Phenolic) ....................................................................249
Blind Nut, Stainless & Carbon Steel ..............................102-103
Blind Standoff, Stainless 303 .................................................98
Chassis, Square ...................................................................259
Extension Nut, Hex or Round, Stainless Steel .......................101
Extension Nut w/Spline ........................................................105
Flush Nut, Straight Shank .....................................................99
Flush Nut, Tapered Shank ....................................................100
Flush Standoff, Stainless/Aluminum .......................................96
Hi-Torque Data & Index ..........................................................92
Knurled Standoff, Aluminum...................................................95
Hex Machine Screw .............................................................246
Hex, Nylon (ZYTEL 101 UL94V2) ...........................................247
Hex Thumb w/Collar.............................................................245
Knurled Thumb w/Collar.......................................................245
Lock, Nylon ..........................................................................247
Potentiometer & Control, Hex ...............................................244
Self-Thread, Nylon ...............................................................247
Slotted, Nylon.......................................................................247
Thumb, Nylon.......................................................................247
Wing, Nylon..........................................................................247
Knurled Standoff, Steel...........................................................94
Miniature Knurled Standoff, Steel...........................................93
RETAINERS
Press Nut w/Spline...............................................................104
Clear Hole, Flare...................................................................194
Reverse Flush Standoff, Stainless ..........................................97
Clear Hole, Flare w/Spring....................................................195
FERRULES
Flare & Knurled Data............................................................190
Threaded, Flare ............................................................192-196
Ferrules................................................................................270
HANDLES
Threaded, Flare, Heavy Duty ................................................196
Threaded, Flare, Small Profile ..............................................196
Folding, Oval, External Thread ..............................................273
Threaded, Flare w/Spring Load ............................................193
Folding, Oval, Internal Thread ...............................................274
Threaded, w/Full Knurl Press Mount .....................................191
Folding, Rectangular, w/Mounting Plate................................274
SCREWS
Folding, Round, Chamfered External Thread .........................271
Folding, Round, External Thread ...........................................272
Oval, Internal Thread ............................................................264
Rectangular, Internal Thread.................................................265
Round, External Thread w/ferrule .........................................268
Round, External Thread w/shoulder......................................269
Round, Internal Thread..................................................260-263
Round, Offset, Internal Thread..............................................267
Round, Side-Mounted, Internal Thread .................................266
Belleville Lock Assy, Specs...................................................116
Cap, Hex Head .....................................................................186
Cap, Hex Head, Slotted.........................................................187
Captive Panel Assy, Binding Head.........................................121
Captive Panel Assy, Binding Head w/Retainer, .....................122
Captive Panel Assy, Cheese Head w/Retainer, Metric............151
Captive Panel Assy, Cheese Head, Slotted, Metric.................150
Captive Panel Assy, Fillister Head .........................................124
continued on next page
3
PICTORIAL TABLE OF CONTENTS
SCREWS (continued)
4
1-888-208-2008
Fax (973) 244-9177
www.accuratescrew.com
SCREWS (continued)
Captive Panel Assy, Fillister Head w/Retainer ......................125
Captive, Hex Socket Button Head .........................................141
Captive Panel Assy, Flat Head w/Retainer ............................138
Captive, Hex Socket Cap, Low..............................................139
Captive Panel Assy, Hex Head w/Retainer ............................134
Captive, Hex Washer Head ...................................................137
Captive Panel Assy, Hex Head w/Retainer, Metric .................155
Captive, Knurled Head ..................................................113-114
Captive Panel Assy, Hex Socket Button Head ........................141
Captive, Machine, Hex Head.................................................132
Captive Panel Assy, Hex Socket Button Head w/Retainer .....142
Captive, Machine, Hex Head, Metric .....................................154
Captive Panel Assy, Hex Socket Cap.....................................130
Captive, Oval Countersunk Head ..........................................115
Captive Panel Assy, Hex Socket Cap, Low ............................139
Captive, Pan Head ................................................................117
Captive Panel Assy, Hex Socket Cap, Metric .........................152
Captive, Pan Head, Metric ....................................................148
Captive Panel Assy, Hex Socket, Low w/Retainer .................140
Captive, Round Head............................................................126
Captive Panel Assy, Machine Screw, Hex Head.....................133
Captive, Security Flat Head ..................................................146
Captive Panel Assy, Machine Screw, Hex Head, Metric .........155
Captive, Security Pan Head ..................................................145
Captive Panel Assy, Pan Head ..............................................118
Captive, Security Socket Pin Head, Button............................146
Captive Panel Assy, Pan Head w/Retainer ............................117
Captive, Security Socket Pin Head, Flat ................................146
Captive Panel Assy, Pan Head, Metric...................................148
Captive, Short Knurled Head.................................................113
Captive Panel Assy, Pan Head, Metric w/Retainer ................149
Captive, Socket Head Cap ....................................................129
Captive Panel Assy, Round Head ..........................................127
Captive, Socket Head Cap, Metric ........................................152
Captive Panel Assy, Round Head w/Retainer ........................128
Captive, Thumb Screw w/Knobs ...........................................171
Captive Panel Assy, Security Pan Head .................................145
Captive, Torx Socket Button Head .........................................143
Captive Panel Assy, Socket Head Cap w/Retainer ................131
FMR2002 Front-Mount Retainer Assembly....................110-112
Captive Panel Assy, Socket Head Cap, Metric w/Retainer ....153
Hex Socket Cap ...................................................................178
Captive Panel Assy, Torx Button Head w/Retainer ................144
Jack Screw, Hex ....................................................................41
Captive Panel Assy, Torx Socket Button Head .......................143
Knurled Phenolic Hand Screws & Nuts .................................249
Captive, Binding Head ..........................................................120
Machine, Flat Countersunk, Slotted ......................................184
Captive, Cheese Head, Slotted, Metric ..................................150
Machine, Hex Head ..............................................................179
Captive, Countersink, Rounded.............................................115
Machine, Hex Head, Slotted .................................................182
Captive, Fillister Head...........................................................123
Machine, Oval Countersunk, Slotted .....................................185
Captive, Flat Head Cross-Recessed, Metric ..........................156
Machine, Pan Head, Slotted..................................................183
Captive, Flat Head Machine, Slotted & Phillips ..............135-136
Machine, Round Head, Slotted .............................................177
Captive, Flat Head Slotted Machine, Metric ..........................156
Shoulder, Male/Female.........................................................164
Captive, Flat Head, Hex Socket.............................................137
Shoulder, Slotted ..........................................................158-161
continued on next page
1-888-208-2008
Fax (973) 244-9177
www.accuratescrew.com
PICTORIAL TABLE OF CONTENTS
SCREWS (continued)
STANDOFFS
Shoulder, Socket Head..................................................162-163
Adapters, Male Space ............................................................41
Slotted, Binding Head...........................................................180
Blind Threaded Hole...............................................................89
Slotted, Fillister Head ...........................................................181
Double-Ended, Male .........................................................34-35
Slotted, Set Screws ..............................................................188
Double-Ended, Male, Hi-Torque ........................................36-37
Socket Head Cap, Stainless ..........................................172-173
Face Knurled, Clear Hole & Threaded .....................................90
Socket Set ...........................................................................189
FMR2002 Front-Mount Retainer/Standoff .............................7-8
Socket Set, Cup Point, Stainless ...................................174-175
Hi-Torque, Clear Hole & Threaded ..........................................11
Socket Set, Nylon Tip, Hex ...................................................176
Hinged, for Terminal Boards ...................................................91
Thumb, Captive Pusher ........................................................166
Insulating, Strong Thread .......................................................16
Thumb, Knurled, Captive & Full Pusher ...............................168
Knurled, Press Mount, Male ..................................................43
Thumb, Knurled, Collared .....................................................167
Knurled, Press Mount, Male, Double-Ended ...........................44
Thumb, Knurled, Round-Cornered ........................................169
Knurled, Threaded & Clear Hole ........................................79-88
Thumb, Pusher.....................................................................165
Locking, Threaded w/Captive Washer, Male/Female ..............32
Thumb, Shoulder..................................................................170
Locking, Threaded w/Ext. Tooth Lock Washer, Male/Female ..40
SELF-LOCKING DEVICES
Self-Forming, Male/Female ....................................................29
Shoulder, Male .......................................................................42
Self-Locking Devices: Specs ................................................109
Snap-in, Double-Ended ..........................................................26
SPACERS
Snap-in, Female, Threaded ....................................................24
Clear Hole.........................................................................17-18
Snap-in, Male, Threaded ........................................................25
Clear Hole, Double-Ended, Self-Locating ................................21
Swage ...................................................................................45
Clear Hole, Locking ................................................................19
Swage, Flare..........................................................................45
Clear Hole, Self-Locating........................................................20
Swage, Hi-Torque, Hex...........................................................45
Knurled, Threaded..................................................................13
Swage, Positive Locking, Threaded & Clear Hole...............72-78
Locking, Threaded w/Ext. Tooth Lock Washer .........................12
Swage, Threaded & Clear Hole .........................................46-71
Self-Retaining, Stacking.........................................................24
Threaded ............................................................................9-10
Thin Wall Telescopic, Brass Tubular...................................22-23
Threaded w/Diamond Knurl, Male/Female..............................38
Threaded, Self-Locating .........................................................14
Threaded, Hi-Torque, Male/Female ..................................30-31
Threaded, Self-Locating, Double-Ended .................................15
Threaded, Male/Female ....................................................27-28
Threaded, Self-Locating, Male/Female ...................................39
continued on next page
5
PICTORIAL TABLE OF CONTENTS
STUDS
1-888-208-2008
Fax (973) 244-9177
www.accuratescrew.com
WASHERS (continued)
Studs, Locking, Blind Press, Stainless & Aluminum ..............106
Washers, Cylindrically Curved, Spring Steel ..................232-238
Studs, Locking, Concealed Head, Stainless & Carbon Steel ..108
Washers, Finishing ...............................................................243
Studs, Locking, Flush Mount, Stainless ................................107
Washers, Flat................................................................198-215
Studs, Threaded, Continuous ........................................255-258
Washers, Flat, Neoprene Durameter Medium #60 .........216-217
Washers, Lock: Internal, External, Split.................................157
TOOLS
Tools, Security, Spanner & Pin Socket ..................................147
Washers, Panel Screw..........................................................243
Washers, Panel Screw Retainer ............................................197
WASHERS
!
Washers, Panel Screw Retainer, Metric ................................147
Washers, Belleville........................................................227-231
Washers, Shoulder........................................................218-226
Washers, Counterbore ..........................................................243
Washers, Wave .............................................................239-242
TECH TIP
Be sure to check out our new 3D CAD model repository at
www.accuratescrew.com. Each model is custom generated as per
your specifications.
Be sure to also take advantage of ASM’ s other online features such
as: requesting a quote, checking your or der status, accessing live
support and searching for products.
RoHS Compliant
All products in catalog are RoHS compliant (see pages 275 and 277).
6
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
The Latest
Innovation in
Fastener
Technology!
Front-Mount
Retainer/Standoff
STANDOFFS & SPACERS
1-888-208-2008
WHAT IS THE FMR2002?
• The FMR2002 is a pa tented multi-purpose fastener
developed by ASM that is available
externally/internally threaded for use as a retainer
assembly (Fig. A) or threaded standoff (Fig. C) - plus
it can be ordered without internal threads for use as
a clear-hole standoff/spacer (Fig. B).
• The FMR2002 is completely installed from the
front of a panel due to its unique external threaded
design – you simply drill, tap, and install with a
standard socket or open ended wrench.
Call our Sales Department today a t 1-888-208-2008 for
complete details.
Visit our Web site at www.accuratescrew.com to view a
video clip of the FMR2002’s easy front mount installa tion.
Fig. A
Fig. B
• The FMR2002 is produced hex-headed and is
available in brass, steel, or stainless steel.
HOW DOES THE FMR2002
SAVE TIME AND MONEY?
Fig. C
• Reduces Panel Assembly Time up to 20% due to
the unique completely front mount (or single-sided)
installation process.
• Cuts Production Setup Costs because there is no
need for anvil/punch sets or equipment, such as an
arbor press, punch press, or drill press.
(Complete product specifications info. located on the next pa ge)
• Eliminates Product Rejection Rates on bent,
cracked, or bulging panels because, unlike traditional
swaged or flared products tha t require a pressing
force for installation, the FMR2002 simply screws
tightly into place.
• Allows Onsite Product Repair due to its external
threaded design and installation, which enables the
FMR2002 to be easily removed and reused.
7
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
Front-Mount Retainer/Standoff
Installed
Basic
Part
Number
Captive
Screw
Thread Size
R
Min
P
M
S
Hex
76256
76440
76632
76832
761032
761024
762520
2-56
4-40
6-32
8-32
10-32
10-24
1/4-20
.125
.125
.125
.125
.125
.125
.125
.062
.093
.093
.093
.093
.093
.125
8-32
10-32
1/4-28
1/4-28
5/16-24
5/16-24
3/8-24
3/16
1/4
5/16
5/16
3/8
3/8
7/16
Available Material
(see page 275)
A
B
S
SS
Aluminum
Brass, composition 360
Steel, low carbon 1018 ASTM 108
Stainless Steel
18-8, 302-304 series, ASTMA 580/A580M-98
CLEAR HOLE
STANDOFFS
Available ID and Appropriate Code
Screw ID +.010 Code Screw ID +.010 Code
–.000
–.000
Thread
Letter Thread
Letter
#2
#4
#6
.100
.128
.156
A
#8
B
#10
C #1/4
.180
.213
.281
D
E
F
To specify Clear Hole Option, add prefix code to part number.
EXAMPLE: A76256-H-SS-12
.100 - ID
ORDER EXAMPLE:
76256 - H SS - 12
Basic
Hex Only
Material:
Part Number
See chart
Any dimension may be changed by adding to part number .
EXAMPLE: 76256 H SS 12 (R = .187)
Finish:
See page 277
The FMR2002 is an excellent alternative to existing flared and swage standoff products…
In Applications With Restricted Installation Space
Fig. C
The FMR2002 completely installs from the front (or a
single-side) of a panel using a standard socket or open
ended wrench (Fig. C). This dramatically reduces clearance
and accessibility constraints normally associa ted with
traditional retainer/standoff products that require installation
using a press, anvil, or punch (Fig. D).
Fig. D
In Applications With Panel Edge Distortion Concerns
The FMR2002 can be installed much c loser to the edge of a
panel (Fig. E) than a traditional retainer/standoff without
concerns about panel distortion. This is possible because
the shank portion of the FMR2002 is screwed in ra ther than
pressed, which lessens the force and stress a pplied to the
panel material, eliminating any bulging or cracking issues
(Fig. F).
Fig. G
Fig.
E
PC Board
Fig.
F
THE FMR2002 IS A PERFECT CHOICE
FOR USE IN PCB APPLICATIONS!
See Fig. G
For FMR2002 captive screw assembly information please refer to the product section starting on pa ge 110.
8
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
THREADED STANDOFFS
Available Material (see page 275)
A
B
C
S
SS
N
D
UL*
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
ULTEM 1000
Ph**
Phl**
L**
PA**
PP**
T
F**
KF**
*ULTEM 1000 UL Rating 94V-0
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
Fiber
Kel-F
(see page 109)
**Supplied in round only .
ORDER EXAMPLE:
9010 - R - SS - .250 - 12
Basic
Part
Number
Hex (H) or
Round (R)
or Square (S)
Material:
See chart
Length:
Fill in your length,
any increment
Finish:
See page 277
If a different thread on each end is needed, including Metric, add to end of part number .
EXAMPLE: 1130-H- SS-.500-12 (one end 4-40 thd.)
OD
1/8
5/32
3/16
1/4
5/16
3/8
7/16
Thread
0-80
2-56
4-40
2-56
4-40
6-32
2-56
4-40
6-32
8-32
10-32
2-56
4-40
6-32
8-32
10-32
1/4-20
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
1/4-28
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
Basic Part No.
Thread
0-80
2-56
4-40
6-32
8-32
H or R or S
10-24
10-32
1/4-20
1/4-28
3/8-16*
3/8-24*
5/16-18*
7/16-14*
*Thread sizes available for 7/16 OD and larger .
For Dep h of Thread information, see page 281.
Material
Length
Finish
9010
1016
1017
1020
1030
1031
1110
1120
1130
1140
1150
1210
1220
1230
1240
1250
1253
1310
1320
1330
1340
1345
1350
1352
1353
1410
1420
1430
1440
1450
1460
1470
NOTE: Hi-Torque Feature (see page 11), Locking Standoff (see page 12), Insulating Standof f (see page 16).
9
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
THREADED STANDOFFS
Available Material (see page 275)
A
B
C
S
SS
N
D
UL*
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
ULTEM 1000
Ph**
Phl**
L**
PA**
PP**
T
F**
KF**
*ULTEM 1000 UL Rating 94V-0
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
Fiber
Kel-F
(see page 109)
**Supplied in round only .
ORDER EXAMPLE:
1510 - R - SS - .250 - 12
Basic
Part
Number
Hex (H) or
Round (R)
or Square (S)
Material:
See chart
Length:
Fill in your length,
any increment
Thread
Finish:
See page 277
2-56
4-40
6-32
8-32
10-24
If a different thread on each end is needed, including Metric, add to end of part number .
EXAMPLE: 1550-H- SS-.500-12 (one end 10-32 thd.)
10-32
12-24
1/4-20
1/4-28
3/8-16
3/8-24
5/16-18
7/16-14
For Depth of Thread informa ion, see page 281.
OD
1/2
5/8
3/4
Thread
Basic Part No.
2-56
4-40
6-32
8-32
10-24
10-32
12-24
1/4-20
1/4-28
4-40
6-32
8-32
10-24
10-32
3/8-24
12-24
1/4-20
5/16-18
3/8-16
7/16-14
2-56
4-40
6-32
8-32
10-24
10-32
12-24
1/4-20
1/4-28
5/16-18
3/8-16
7/16-14
1510
1520
1530
1540
1550
1560
1570
1580
1581
1610
1620
1630
1640
1650
1651
1660
1670
1680
1682
1685
2100
2105
2110
2115
2120
2125
2130
2135
2140
2145
2150
2155
H or R or S
Material
Length
Finish
NOTE: Hi-Torque Feature (see page 11), Locking Standoff (see page 12), Insulating Standof f (see page 16).
10
1-888-208-2008
HI-TORQUE THREADED & CLEAR HOLE SPACERS
Hex or Square
LOCKS SPACERS, SAMPLES AVAILABLE
CONVENTIONAL SPACERS SPIN EASILY
HI-TORQUE SPACER OFFERS MAXIMUM TORQUE
Conventional No-Grip
Six Point Grip
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
L
1. Refer to Clear Hole and Threaded Spacers on pages 9-21.
2. Add letter designation (HT) to part number according to the order example below .
ORDER EXAMPLE:
1130 - H - A - .500 - 1
Basic
Part
Number
Hex (H) or
Square (S)
Material:
See chart
Overall
Length:
L ± .005
Finish:
See page 277
-
HT
Hi-Torque
If Hi-Torque factor is required on one side, indicate: EXAMPLE: 1130-H-A-.500-1 (HT one side only)
A STANDOFF THAT WON’T SPIN!
Hi-Torque hex swage standoff with a locking feature that ends loosening & spinning problems
HI-TORQUE SWAGE STANDOFF
HI-TORQUE HEX SWAGE
GRIPPING STANDOFF*
HEX SWAGE
NO-GRIP STANDOFF
Up to 23 in/lb - 6 Flats Really Grip!
Conventional No-Grip!
Six flats really grip the board to provide the highest
torque installation achievable yet.
No
additional
tooling
required.
*This feature is also available for Male/Female
Standoffs see pages 27-28.
11
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
LOCKING THREADED SPACERS
Available in Hex, Round or Squar e
S
SS
Lock Washer
Material
Finish
Steel - 1040/1060
Zinc Chrome Clear
Stainless Steel - 410
NONE
Threaded Spacer Available Material
(see page 275)
A Aluminum
B Brass
C Copper
S Steel
ORDER EXAMPLE:
1020 - R - SS - .250 - LSS - 12
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Spacer
Material:
See chart
Length L:
Fill in your length,
any increment
Lock Washer
Material:
Stainless (LSS)
or Steel (LS)
Finish:
See page 277
No specific increments required for length.
To order Lock Washer in steel (1040/1060) add LS to end of part number: EXAMPLE: 1020-R-S-.250-LS -12
To order Lock Washer on bo h ends add LL to end of part number: EXAMPLE: 1020-R-SS-.250-LLSS-12
OD
3/16
1/4
5/16
3/8
!
12
Thread
2-56
4-40
2-56
4-40
2-56
4-40
6-32
8-32
10-32
2-56
4-40
6-32
8-32
10-24
10-32
Basic
Part Number
1020
1030
1110
1120
1210
1220
1230
1240
1250
1310
1320
1330
1340
1345
1350
TECH
TIP
Metric sizes and
threads are available
on many of the pr oducts
we manufacture.
OD
7/16
1/2
5/8
3/4
Thread
2-56
4-40
6-32
8-32
10-24
10-32
2-56
4-40
6-32
8-32
10-24
10-32
4-40
6-32
8-32
10-24
10-32
2-56
4-40
6-32
8-32
10-24
10-32
12-24
SS Stainless Steel
A
Inside
Diameter
Min
Max
Thread
2-56
4-40
6-32
8-32
10-32
.115
.141
.168
.195
.258
Basic
Part Number
1410
1420
1430
1440
1450
1460
1510
1520
1530
1540
1550
1560
1610
1620
1630
1640
1650
2100
2105
2110
2115
2120
2125
2130
.123
.150
.176
.204
.267
Washer Size
B
Outside
Diameter
Min
Max
Min
Max
.245
.305
.365
.395
.494
.015
.016
.018
.020
.023
.019
.022
.029
.025
.028
.260
.320
.381
.410
.510
C
Thickness
Washer
Number
4
6
8
10
1/4
1/4
4
6
8
10
1/4
1/4
6
8
10
1/4
1/4
4
6
8
10
1/4
1/4
1/4
NOTE: For depth of hread, see page 281.
1-888-208-2008
KNURLED THREADED SPACERS
L
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
APPLICATION:
These inserts can be die cast into aluminum and zinc, used in plastic and
metal sheets, injection and compression molded.
Thread
Available Material (see page 275)
A
B
S
SS
2-56
2-64
3-48
3-56
4-40
Aluminum
Brass
Steel
Stainless Steel
6-32
8-32
10-24
10-32
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
ORDER EXAMPLE:
1900 - A - .125 - 22
Basic
Part
Number
A
Dia
5/32
3/16
7/32
1/4
9/32
3/8
7/16
1/2
Material:
See chart
Length:
Fill in your length,
any increment
Thread
2-56
2-64
3-48
3-56
4-40
4-48
6-32
6-40
4-40
6-32
8-32
8-32
10-24
10-32
8-32
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24 1985
Basic
Part Number
Finish:
See page 277
Material
Length
Finish
1900
1905
1910
1915
1920
1925
1930
1935
1941
1942
1943
1944
1950
1955
1957
1960
1965
1970
1975
1980
NOTE: When length is 2" or longer, 3/4" will be knurled from each end. For depth of thread, see page 281.
13
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
SELF-LOCATING THREADED SPACERS
B
L
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Board or Panel
Thickness
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
Fiber
1/32
1/16
3/32
1/8
3/16
1/4
B
Recommended
Shank Length
.025
.055
.085
.118
.180
.240
**Supplied in round only.
ORDER EXAMPLE:
3302 - H - A - .500 - .025 - 2
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Spacer Length L:
Fill in your length,
any increment*
Shank Length B:
Fill in your length,
any increment*
Finish:
See page 277
*No specific increments required for spacer or shank length.
OD
1/4
5/16
3/8
1/2
14
Thread
A
Shank Dia
+.000
-.003
Basic
Part
Number
2-56
4-40
6-32
6-32
8-32
6-32
8-32
10-32
6-32
8-32
10-32
1/4-20
.188
.188
.188
.234
.234
.234
.234
.281
.234
.234
.312
.375
3302
3304
3306
3308
3310
3312
3314
3316
3318
3320
3322
3324
H or R or S
Material
L
Spacer
Length
B
Shank
Length
Finish
NOTE: When overall length is 3/4" or longer , see page 281 for depth of thread. Length L not less than .125.
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
C and D
Board or
Recommended
Panel
Thickness Shank Length
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
Fiber
1/32
1/16
3/32
1/8
3/16
1/4
.025
.055
.085
.118
.180
.240
!
ORDER EXAMPLE:
3102 - H - A - .500 - .025 - 2
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Spacer Length L:
Fill in your length,
any increment*
Shank Length C & D:
Fill in your length,
any increment*
Finish:
See page 277
*No specific increments required for spacer or shank length.
OD
1/4
5/16
3/8
1/2
Thread
A&B
Shank Dia
+.000
-.003
Basic
Part
Number
2-56
4-40
6-32
6-32
8-32
6-32
8-32
10-32
6-32
8-32
10-32
1/4-20
.188
.188
.188
.234
.234
.234
.234
.281
.234
.234
.312
.375
3102
3104
3106
3108
3110
3112
3114
3116
3118
3120
3122
3124
H or R or S
Material
NOTE: When overall length is 3/4" or longer , see page 281 for depth of thread. Length L not less han .125.
TECH
TIP
Torque-tension formula
and tables are useful
in determining the
required torque.
However, the only
sure way to establish
the “correct” torque
is through
experimentation
utilizing the actual
fasteners or one that
closely simulates it.
**Supplied in round only.
Basic
Part
Number
STANDOFFS & SPACERS
SELF-LOCATING, DOUBLE-ENDED
THREADED SPACERS
L
Spacer
Length
C&D
Shank
Length
Finish
15
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
STRONG INSULATING THREADED STANDOFFS*
Available Material (see page 275)
ORDER EXAMPLE:
1130 - H - N - .625 - LI - 1 - (M3.5x0.6)
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Fill in your
length, any
increment
Locking
Insert
Finish:
See page
277
D
N
T
L**
PA**
PP**
UL*
Metric
Requirement
For Threaded Standoff Basic Part Number, see pages 9, 10, 14 or 15.
Add letters LI (Locking Insert) to part number as shown above to specify strong insulating feature.
EXAMPLE: 1130-H-N-.625-LI-1
METRIC THREADED EXAMPLE: 1130-H-N-.625-LI-1-(M3.5x0.6)
Delrin
Nylon
Teflon
Polycarbonate (Lexan)
A.B.S..
P.V.C..
ULTEM 1000
*ULTEM 1000 - UL Rating 94V-0
**Supplied in round only.
SELF-THREADING INSERT FOR THERMOPLASTICS
AND THERMOSET PLASTICS
Brass inserts are designed for maximum pullout strength, superior vibration resistance.
D is a special thread designed for ease of installation and strength.
Insert
Mounting Hole
1" minimum length required.
OTHER
OPTIONS:
Internal
Thread Size
(Inches)
2-56
4-40
6-32
8-32
8-32
10-32
1/4-20
Internal
Thread Size
(Metric)
M2 x 0.4
M3 x 0.5
M3.5 x 0.6
M4 x 0.7
M4 x 0.7
M5 x 0.8
M6 x 1
D
Diameter
L
Insert Length
Recommended
Hole Size
.141
.171
.218
.250
.250
.296
.375
.187
.234
.281
.328
.218
.375
.312
.127-.124
.152-.149
.194-.190
.226-.222
.226-.222
.264-.259
.330-.336
MALE/FEMALE STANDOFFS
ORDER EXAMPLE:
14040 - H - N - .500 - LI - 1
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Fill in your
length, any
increment
Locking Finish:
Insert See page
277
For Threaded Standoff Basic Part Number, see pages 9, 10, 14 or 15.
Add letters LI (Locking Insert) to part number as shown above to specify
strong insulating feature.
EXAMPLE: 14040-H-N-.500-LI-1
16
*See pages starting on 275 for further specifications, tolerance, etc.
1-888-208-2008
CLEAR HOLE SPACERS
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
**Supplied in round only.
Recommended Clearance Hole
ORDER EXAMPLE:
1010 - R - SS - .250 - 12
Basic
Part
Number
Hex (H) or
Round (R)
or Square (S)
Material:
See chart
Length:
Fill in your length,
any increment
Finish:
See page 277
Any one dimension change, add to the end of part number .
EXAMPLE: 1010-R-SS-.250-12-(MOD ID .100)
OD x ID
1/8 x .091
5/32 x .091
5/32 x .115
5/32 x .120
3/16 x .091
3/16 x .115
3/16 x .120
3/16 x .140
3/16 x .150
1/4 x .091
1/4 x .115
1/4 x .120
1/4 x .140
1/4 x .148
1/4 x .171
5/16 x .091
5/16 x .115
5/16 x .140
5/16 x .171
5/16 x .194
3/8 x .115
3/8 x .140
3/8 x .171
3/8 x .187
3/8 x .194
3/8 x .219
3/8 x .250
3/8 x .253
3/8 x .257
3/8 x .277
7/16 x .140
Basic
Part Number
H or R or S
Material
Thread
ID - Inside Dia
2-56
4-40
6-32
8-32
10-32
10-24
1/4-20
.091
.115
.140
.171
.194
.194
.257
Length
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
+.015 -.000
Finish
1010
1011
1012
1013
2010
2020
2030
2040
2050
3010
3020
3021
3030
3031
3040
4006
4010
4020
4030
4040
5005
5010
5020
5025
5030
5040
5042
5041
5043
5045
6010
17
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
CLEAR HOLE SPACERS
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S.
P.V.C.
Teflon
F ber
**Supplied in round only.
Recommended Clearance Hole
ORDER EXAMPLE:
6020 - R - SS - .250 - 12
Basic
Part
Number
Hex (H) or
Round (R)
or Square (S)
Material:
See chart
Length:
Fill in your length,
any increment
Finish:
See page 277
Any one dimension change, add to the end of part number .
EXAMPLE: 6020-R-SS-.250-12-(MOD ID .100)
OD x ID
7/16 x .171
7/16 x .194
1/2 x .140
1/2 x .171
1/2 x .194
1/2 x .219
1/2 x .257
5/8 x .140
5/8 x .171
5/8 x .194
5/8 x .219
5/8 x .257
5/8 x .281
5/8 x .312
5/8 x .315
5/8 x .375
5/8 x .406
5/8 x .437
3/4 x .140
3/4 x .171
3/4 x .194
3/4 x .219
3/4 x .257
3/4 x .281
3/4 x .312
3/4 x .375
3/4 x .380
3/4 x .406
3/4 x .437
3/4 x .440
3/4 x .505
18
Basic
Part Number
6020
6030
7010
7020
7030
7040
7050
8010
8020
8030
8040
8050
8060
8070
8071
8080
8090
8095
8800
8805
8810
8815
8820
8825
8830
8097
8831
8835
8840
8841
8845
H or R or S
Material
Thread
ID - Inside Dia
Thread
ID - Inside Dia
2-56
4-40
6-32
8-32
10-32
10-24
1/4-20
.091
.115
.140
.171
.194
.194
.257
1/4-28
5/16-18
3/8-24
3/8-16
7/16-14
1/2-13
.257
.315
.380
.380
.440
.505
+.015 -.000
Length
+.015 -.000
Finish
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
LOCKING CLEAR HOLE SPACERS
AVAILABLE IN HEX, ROUND OR SQUARE
Clear Hole Spacer
Available Material
(see page 275)
ORDER EXAMPLE:
2010 - R - SS - .250 - LSS - 12
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Spacer
Material:
See chart
Length L:
Fill in your length,
any increment
Lock Washer
Material:
Stainless (LSS)
or Steel (LS)
Finish:
See page 277
No specific increments required for length.
NOTE: To order Lock Washer on both ends, just add LL to end of part number.
EXAMPLE: 2010-R-SS-.250-LLSS-12
OD x ID
3/16 x .091
3/16 x .120
1/4 x .091
1/4 x .115
1/4 x .120
5/16 x .091
5/16 x .115
5/16 x .140
5/16 x .171
5/16 x .194
3/8 x .115
3/8 x .140
3/8 x .171
3/8 x .187
3/8 x .194
Basic
Part Number
2010
2030
3010
3020
3021
4006
4010
4020
4030
4040
5005
5010
5020
5025
5030
Washer
Number
4
6
4
6
6
4
6
8
10
12
6
8
10
12
12
Finish
Zinc Chrome Clear
NONE
NOTE: For depth of thread, see page 281.
Aluminum
B
Brass
C
Copper
S
Steel
SS
Stainless Steel
OD x ID
Basic
Part Number
Washer
Number
7/16 x .140
7/16 x .171
7/16 x .194
1/2 x .140
1/2 x .171
1/2 x .194
5/8 x .140
5/8 x .171
5/8 x .194
3/4 x .140
3/4 x .171
3/4 x .194
6010
6020
6030
7010
7020
7030
8010
8020
8030
8800
8805
8810
8
10
12
8
10
12
8
10
12
8
10
12
Thread
Lock Washer
Material
S Steel - 1040/1060
SS Stainless Steel - 410
A
2-56
4-40
6-32
8-32
10-24
10-32
A
Inside
Diameter
Min
.115
.141
.168
.195
.258
.258
Max
.123
.150
.176
.204
.267
.267
Washer Size
B
Outside
Diameter
Min
.245
.305
.365
.395
.494
.494
Max
.260
.320
.381
.410
.510
.510
C
Thickness
Recommended
Clearance Hole
Thread
Min
.015
.016
.018
.020
.023
.023
Max
.019
.022
.029
.025
.028
.028
2-56
4-40
6-32
8-32
10-24
10-32
ID - Inside Dia
+.010
-.000
.091
.115
.140
.171
.194
.194
19
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
SELF-LOCATING CLEAR HOLE SPACERS
Available Material
(see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S.
P.V.C.
Teflon
F ber
Board
or Panel
Thickness
B
Recommended
Shank Length
1/32
1/16
3/32
1/8
3/16
1/4
.025
.055
.085
.118
.180
.240
Color
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
Code
1
2
3
4
5
6
7
8
9
**Supplied in round only.
ORDER EXAMPLE:
3340 - H - A - .500 - .025 - 2
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Spacer Length L:
Fill in your length,
any increment*
Shank Length B:
Fill in your length,
any increment*
Finish:
See page 277
!
Nylon and Delrin
parts are supplied
in nine different
colors.
No specific increments required for length.
EXAMPLE FOR NYLON AND DELRIN PARTS: 3340-H-N-.500-.025-2
BLACK
Choose color from chart, otherwise Natural is provided.
Any one dimension change can be added to the end of part number .
EXAMPLE: 3340-H-A-.500-.025-3 (MOD ID = .060)
20
OD x ID
A Shank Dia
+.010
-.005
+.000
-.003
Basic
Part
Number
1/4 x .091
1/4 x .120
1/4 x .140
5/16 x .115
5/16 x .140
5/16 x .171
5/16 x .194
3/8 x .140
3/8 x .171
3/8 x .194
1/2 x .140
1/2 x .171
1/2 x .194
1/2 x .219
1/2 x .257
.188
.188
.188
.234
.234
.234
.234
.234
.234
.257
.257
.257
.257
.312
.375
3340
3342
3344
3346
3348
3350
3352
3354
3356
3358
3360
3362
3364
3366
3368
Hex or
Round or
Square
TECH
TIP
Material
L
Spacer
Length
B
Shank
Length
Finish
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
Available Material
(see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
Board
Or Panel
Thickness
C&D
Recommended
Shank Length
1/32
1/16
3/32
1/8
3/16
1/4
.025
.055
.085
.118
.180
.240
STANDOFFS & SPACERS
DOUBLE-ENDED, SELF-LOCATING
CLEAR HOLE SPACERS
Color
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
Code
1
2
3
4
5
6
7
8
9
**Supplied in round only.
ORDER EXAMPLE:
3202 - H - A - .500 - .025 - 2
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Spacer Length L:
Fill in your length,
any increment*
Shank Length C & D:
Fill in your length,
any increment*
Finish:
See page 277
Choose color from chart, otherwise Natural is provided.
EXAMPLE FOR NYLON AND DELRIN PARTS: 3202-H-N-.500-.025-2
BLACK
Any one dimension change can be added to the end of part number .
EXAMPLE: 3202-H-A-.500-.025-3 (MOD ID = .060)
OD x ID
+.010
-.005
1/4 x .091
1/4 x .120
1/4 x .140
5/16 x .115
5/16 x .140
5/16 x .171
5/16 x .194
3/8 x .140
3/8 x .171
3/8 x .194
1/2 x .171
1/2 x .194
1/2 x .219
1/2 x .257
A-B
Shank Dia
+.000
-.003
Basic
Part
Number
.188
.188
.188
.234
.234
.234
.234
.234
.234
.257
.234
.257
.312
.375
3202
3204
3206
3208
3210
3212
3214
3216
3218
3220
3222
3224
3226
3228
Hex or
Round or
Square
Material
L
Spacer
Length
C&D
Shank
Length
Finish
21
1-888-208-2008
STANDOFFS & SPACERS
STANDOFFS & SPACERS
THIN WALL TELESCOPIC
BRASS TUBULAR SPACERS
ORDER EXAMPLE:
900100 - 1
Basic
Part
Number
Finish*:
See page
277
*AVAILABLE IN ALUMINUM:
Add the letter A after part number. EXAMPLE: 900100-A-1
OD
ID
1/16
(.0625)
.035
3/32
(.094)
.066
1/8
(.125)
22
Fax (973) 244-9177
www.accuratescrew.com
.097
5/32
(.156)
.128
3/16
(.187)
.159
Length
Part
Number
.125
.187
.250
.312
.375
.438
.500
.125
.187
.250
.312
.375
.438
.500
900100
900102
900104
900106
900108
900110
900112
900114
900116
900118
900120
900122
900124
900126
.125
.187
.250
.312
.375
.438
.500
900128
900130
900132
900134
900136
900138
900140
.125
.187
.250
.312
.375
.438
.500
.125
.187
.250
.312
.375
.438
.500
900142
900144
900146
900148
900150
900152
900154
900156
900158
900160
900162
900164
900166
900168
OD
ID
7/32
(.219)
.191
1/4
(.250)
.222
9/32
(.281)
.253
5/16
(.312)
.285
11/32
(.344)
.316
Length
Part
Number
.125
.187
.250
.312
.375
.438
.500
.125
.187
.250
.312
.375
.438
.500
.125
.187
.250
.312
.375
.438
.500
900170
900172
900174
900176
900178
900180
900182
900184
900186
900188
900190
900192
900194
900196
900198
900200
900202
900204
900206
900208
900210
.125
.187
.250
.312
.375
.438
.500
.125
.187
.250
.312
.375
.438
.500
900212
900214
900216
900218
900220
900222
900224
900226
900228
900230
900232
900234
900236
900238
OD
ID
3/8
(.375)
.347
13/32
(.406)
.378
7/16
(.438)
.409
15/32
(.468)
.440
1/2
(.500)
.472
Length
Part
Number
.125
.187
.250
.312
.375
.438
.500
.125
.187
.250
.312
.375
.438
.500
.125
.187
.250
.312
.375
.438
.500
.125
.187
.250
.312
.375
.438
.500
.125
.187
.250
.312
.375
.438
.500
900240
900242
900244
900246
900248
900250
900252
900254
900256
900258
900260
900262
900264
900266
900268
900270
900272
900274
900276
900278
900280
900282
900284
900286
900288
900290
900292
900294
900296
900298
900300
900302
900304
900306
900308
1-888-208-2008
THIN WALL TELESCOPIC
BRASS TUBULAR SPACERS
ORDER EXAMPLE:
900310 - 1
Basic
Part
Number
Finish*:
See page
277
*AVAILABLE IN ALUMINUM:
Add the letter A after part number. EXAMPLE: 900310-A-1
OD
ID
3/32
(.094)
.036
1/8
(.125)
.067
5/32
(.156)
.098
3/16
(.187)
.129
Length
Part
Number
.125
.187
.250
.312
.375
.438
.500
.125
.187
.250
.312
.375
.438
.500
900310
900312
900314
900316
900318
900320
900322
900324
900326
900328
900330
900332
900334
900336
.125
.187
.250
.312
.375
.438
.500
.125
.187
.250
.312
.375
.438
.500
900338
900340
900342
900344
900346
900348
900350
900352
900354
900356
900358
900360
900362
900364
OD
ID
7/32
(.219)
.161
1/4
(.250)
.192
9/32
(.281)
.223
5/16
(.312)
.254
Length
Part
Number
.125
.187
.250
.312
.375
.438
.500
.125
.187
.250
.312
.375
.438
.500
.125
.187
.250
.312
.375
.438
.500
.125
.187
.250
.312
.375
.438
.500
900366
900368
900370
900372
900374
900376
900378
900380
900382
900384
900386
900388
900390
900392
900394
900396
900398
900400
900402
900404
900406
900408
900410
900412
900414
900416
900418
900420
OD
ID
11/32
(.344)
.286
3/8
(.375)
.317
7/16
(.438)
.380
1/2
(.500)
.442
Length
Part
Number
.125
.187
.250
.312
.375
.438
.500
.125
.187
.250
.312
.375
.438
.500
.125
.187
.250
.312
.375
.438
.500
.125
.187
.250
.312
.375
.438
.500
900422
900424
900426
900428
900430
900432
900434
900436
900438
900440
900442
900444
900446
900448
900450
900452
900454
900456
900458
900460
900462
900464
900466
900468
900470
900472
900474
900476
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
23
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
FEMALE “SNAP-IN” THREADED STANDOFF
1/16" Board Thickness
3/32" Board Thickness
(To snap fit in a .152 + .002 dia hole)
(To snap fit in a .152 + .002 dia hole)
(see page 281)
(see page 281)
Available Material (see page 275)
ORDER EXAMPLE:
1130 - H - A - .500 - SN
Basic
Part Number
Hex
Material:
See chart
A
C*
PA*
PP*
T
UL*
Snap-in
Board
Length
Select spacer requirements from pages 9-10.
For Snap-in 1/16 board, add SN to part number . EXAMPLE: 1130-H-A-.500-SN
For Snap-in 3/32 board add SNN to part number . EXAMPLE: 1130-H- A-.500-SNN
For Nylon and Delrin parts, choose color from chart, otherwise Natural is provided.
EXAMPLE: 1130-H-N-.500-SN-2
BLACK
Aluminum
Copper
A.B.S.
P.V.C.
Teflon
ULTEM 1000
B
S
SS
N
D
Brass
Steel
Stainless Steel
Nylon
Delrin
*Supplied in round only.
SELF-RETAINING SPACERS
Self-retaining and aligning • 1/16" Board Thickness • Material: Nylon LP410
ORDER EXAMPLE:
561 - .526 - 1
Basic
Part
Number
Length available
from 1/8 to 5/8
or fill in your
own length*
Color:
See chart
*No specific increments required for length.
Color
Code
Color
Code
Natural
1
Brown
6
Black
2
Orange
7
Red
3
Green
8
Blue
4
Yellow
9
Purple
5
Basic
Part No.
A Dim
Inches (mm)
B Dim
Inches (mm)
C Dim
Inches (mm)
D Dim
Inches (mm)
E Dim
Inches (mm)
Slot
Width
Screw
Size
561
562
563
.260 (6.6)
9/32 (7.1)
9/32 (7.1)
.125 (3.1)
.153 (3.9)
.169 (4.3)
.203
.250
.250
.182
.228
.228
.064
.064
.064
.050
.050
.050
#4
#6
#8
Mounting Hole
+.003 In. (mm)
.187 (4.7)
.234 (5.9)
.234 (5.9)
SELF-RETAINING STACKING SPACERS
Self-retaining and aligning • 1/16" Board Thickness • Material: Nylon LP410
ORDER EXAMPLE:
564 - .526 - 1
Basic
Part
Number
Length available
from 1/8 to 1.00
or fill in your
own length*
Color:
See chart
*No specific increments required for length.
24
Color
Code
Color
Code
Natural
1
Brown
6
Black
2
Orange
7
Red
3
Green
8
Blue
4
Yellow
9
Purple
5
Basic
Part No.
A Dim
Inches (mm)
B Dim
Inches (mm)
C Dim
Inches (mm)
D Dim
Inches (mm)
E Dim
Inches (mm)
Slot
Width
Screw
Size
Mounting Hole
+.003 In. (mm)
564
565
566
1/4 (6.3)
5/16 (7.1)
5/16 (7.1)
.125 (3.1)
.153 (3.9)
.169 (4.3)
.203
.250
.250
.182
.228
.228
.064
.064
.064
.050
.050
.050
#4*
#6**
#8**
.187 (4.7)
.234 (5.9)
.234 (5.9)
*#4 screw size in lengths up to 5/8 (15.9) only .
**#6 and #8 screw size not available in 1/8 (3.2) or 3/16 (4.8) lengths.
1-888-208-2008
MALE “SNAP-IN” THREADED STANDOFF
1/16" Board Thickness
(To snap fit in a
.152 +.002 dia.
hole in a .062
nom. thick board)
Available Material (see page 275)
A
C*
PA*
PP*
T
UL*
Aluminum
Copper
A.B.S.
P.V.C.
Teflon
ULTEM 1000
B
S
SS
N
D
Brass
Steel
Stainless Steel
Nylon
Delrin
Thread
B
2-56
4-40
6-32
8-32
10-32
3/16
1/4
3/8
7/16
1/2
*Supplied in round only.
Hex (H) or
Round (R)
Material:
See chart
Length:
Fill in your length,
any increment
Finish:
See page
277
Thickness
H or R Material Length
Thickness
H or R Material Length
Board
3/16
1/4
ORDER EXAMPLE:
14500 - H - SS - .250 - 2
Basic
Part
Number
D
Basic
Part
No.
Thread
1/16"
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
5/16
3/8
2-56
4-40
6-32
2-56
4-40
6-32
8-32
2-56
4-40
6-32
8-32
10-32
2-56
4-40
6-32
8-32
10-32
14500
14502
14504
14506
14508
14510
14512
14514
14516
14518
14520
14522
14524
14526
14528
14530
14532
3/32" Board Thickness
(To snap fit in a
.152 +.002 dia.
hole in a .093
nom. thick board)
A
C*
PA*
PP*
T
UL*
Available Material (see page 275)
Thread
B
Aluminum
Copper
A.B.S.
P.V.C.
Teflon
ULTEM 1000
2-56
4-40
6-32
8-32
10-32
3/16
1/4
3/8
7/16
1/2
B
S
SS
N
D
Brass
Steel
Stainless Steel
Nylon
Delrin
*Supplied in round only.
Hex (H) or
Round (R)
Material:
See chart
Length:
Fill in your length,
any increment
Finish:
See page
277
No.
Thread Part
3/32"
Board
3/16
1/4
ORDER EXAMPLE:
14501 - H - SS - .250 - 12
Basic
Part
Number
Basic
D
5/16
3/8
2-56
4-40
6-32
2-56
4-40
6-32
8-32
2-56
4-40
6-32
8-32
10-32
2-56
4-40
6-32
8-32
10-32
14501
14503
14505
14507
14509
14511
14513
14515
14517
14519
14521
14523
14525
14527
14529
14531
14533
25
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
DOUBLE “SNAP-IN” STANDOFF
1/16" Board Thickness
(To snap fit in a .152
±.002 dia. hole in a
.062 nom. thick board)
Available Material (see page 275)
ORDER EXAMPLE:
14600 - H - SS - .250 - 12
Basic
Part
Number
Hex (H) or
Round (R)
D
Basic Part
Number
3/16
1/4
5/16
3/8
14600
14606
14614
14624
!
Material:
See chart
H or R
Length:
Fill in your length,
any increment
Material
A
C*
PA*
PP*
T
UL*
Finish:
See page
277
Length
Aluminum
Copper
A.B.S.
P.V.C.
Teflon
ULTEM 1000
B
S
SS
N
D
Brass
Steel
Stainless Steel
Nylon
Delrin
Finish
TECH TIP
ASM has the machine capability to manufactur e root radius threads (UNJ).
3/32" Board Thickness
(To snap fit in a .152
±.002 dia. hole in a
.093 nom. thick board)
ORDER EXAMPLE:
14601 - H - SS - .250 - 12
Basic
Part
Number
26
*Supplied in
round only.
Hex (H) or
Round (R)
D
Basic Part
Number
3/16
1/4
5/16
3/8
14601
14603
14605
14607
Material:
See chart
Length:
Fill in your length,
any increment
Finish:
See page
277
Available Material (see page 275)
A
C*
PA*
PP*
T
UL*
Aluminum
Copper
A.B.S.
P.V.C.
Teflon
ULTEM 1000
B
S
SS
N
D
Brass
Steel
Stainless Steel
Nylon
Delrin
*Supplied in round only.
H or R
Material
Length
Finish
1-888-208-2008
MALE/FEMALE THREADED STANDOFF
See page 29 for Self-Forming Male/Female Standof fs.
See page 279 for Metric ordering information.
(see page 109)
ORDER EXAMPLE:
14002 - H - SS - .250 - 12
Length:
Fill in your length,
any increment
Hex (H),
Material:
Round (R) See chart
or Square (S)
Basic
Part
Number
Finish:
See page
277
If a different thread on each end is needed, including Metric, add to end of part
number. EXAMPLE: 14002-H- SS-.250-12 (one end 4-40 thd.)
If a dimensional or hread change is required (A or B), add to part number.
EXAMPLE: 14002-H-SS-.250-12 (B=440 x 3/8)
Be sure both Thread and Length are specified.
Thread
B
A Thread
Depth Min*
Min. L*
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
12-24
3/16
1/4
3/8
7/16
1/2
1/2
1/2
1/2
3/16
1/4
3/8
7/16
1/2
1/2
1/2
1/2
1/4
3/8
7/16
1/2
5/8
5/8
5/8
5/8
D
5/32
3/16
1/4
5/16
3/8
Thread
Basic Part
Number
2-56
14002
4-40
14004
2-56
14000
4-40
14010
6-32
14015
2-56
14020
4-40
14030
6-32
14040
8-32
14050
2-56
14060
4-40
14070
6-32
14080
8-32
14090
10-32
14100
2-56
14110
4-40
14120
6-32
14130
8-32 14140
10-32
14150
*When the
body length L
is less than or
equal to the
thread depth A,
the maximum
number of
threads
possible will
be provided.
H or R or S
Metric
Thread
M 2.5 x .45
3.0 x 0.5
3.5 x 0.6
4.0 x 0.7
5.0 x 0.8
6.0 x 1.0
8.0 x 1.25
Material
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S.
P.V.C.
Teflon
F ber
**Supplied in round only.
A
Min Depth
3.97
4.76
6.35
9.53
9.53
12.70
12.70
Length
B
4.76
6.35
9.53
11.10
12.70
15.00
15.00
Finish
For Locking Male/Female Threaded Standoff,
see page 40.
!
TECH
TIP
If a deeper thread
depth is required,
the integrity of the
male thread can
be jeopardized due
to the drill depth.
(see chart above for details)
27
1-888-208-2008
STANDOFFS & SPACERS
STANDOFFS & SPACERS
MALE/FEMALE THREADED STANDOFF
See page 29 for Self-Forming Male/Female Standof fs.
See page 279 for Metric ordering information.
(see page 109)
ORDER EXAMPLE:
14160 - H - SS - .250 - 12
Length:
Fill in your length,
any increment
Hex (H),
Material:
Round (R) See chart
or Square (S)
Basic
Part
Number
Finish:
See page
277
If a different thread on each end is needed, including Metric, add to end of part
number. EXAMPLE: 14160-H- SS-.250-12 (one end 4-40 thd.)
If a dimensional or hread change is required (A or B), add to part number.
EXAMPLE: 14160-H-SS-.250-12 (B=440 x 3/8)
Be sure both Thread and Length are specified.
Thread
B
A Thread
Depth Min*
Min. L*
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
12-24
3/16
1/4
3/8
7/16
1/2
1/2
1/2
1/2
3/16
1/4
3/8
7/16
1/2
1/2
1/2
1/2
1/4
3/8
7/16
1/2
5/8
5/8
5/8
5/8
D
Thread
7/16
1/2
28
Fax (973) 244-9177
www.accuratescrew.com
2-56
4-40
6-32
8-32
10-24
10-32
12-24
1/4-20
2-56
4-40
6-32
8-32
10-24
10-32
12-24
1/4-20
Basic Part
Number
14160
14170
14180
14190
14200
14210
14220
14230
14240
14250
14260
14270
14280
14290
14300
14310
*When the
body length L
is less than or
equal to the
thread depth A,
the maximum
number of
threads
possible will
be provided.
H or R or S
Metric
Thread
M 2.5 x .45
3.0 x 0.5
3.5 x 0.6
4.0 x 0.7
5.0 x 0.8
6.0 x 1.0
8.0 x 1.25
Material
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S.
P.V.C.
Teflon
F ber
**Supplied in round only.
A
Min Depth
3.97
4.76
6.35
9.53
9.53
12.70
12.70
Length
B
4.76
6.35
9.53
11.10
12.70
15.00
15.00
Finish
For Locking Male/Female Threaded Standoff,
see page 40.
!
TECH
TIP
If a deeper thread
depth is required,
the integrity of the
male thread can
be jeopardized due
to the drill depth.
(see chart above for details)
1-888-208-2008
MALE/FEMALE SELF-FORMING STANDOFFS
(see page 281 for
slot dimensions)
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
Material Specifications and Finishes (see page 275)
S
SS
Steel Case Hardened (.010 Deep)
12L14 or Equivalent
Stainless Steel (300 Series)
ORDER EXAMPLE:
14040 - H - SS - .500 - 7
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Length:
Fill in your length,
any increment
Finish:
See page
277
Choose any Male/Female Standoff (Hex, Round or Square) from pa ges 27-28.
The thread size and length of the male is determined by the part number . For Self-Forming,
add the letter C to part number. EXAMPLE: 14040-H-S-.500-7-C
If a different male length (B), a different Internal Thread, or depth in female A is required, add
requirement to the part number. EXAMPLE: 14040-H-S-.500-7-C (A=4-40 X 1/4 deep)
Tap
Size
B
Male Length
2
4
6
8
10
12
1/4
3/16
1/4
3/8
7/16
1/2
1/2
1/2
THREAD FORM TAPPING
Because thread form ta pping involves metal displacement, tap drill size
becomes more critical than in conventional ta pping. Charts sho wing ta p
drill sizes for conventional tapping are of no use in setting up a thread form
tapping procedure.
Experimental data shows that thread percenta ges in thread form ta pping
should fall between a maximum of 75% and a minimum of 55% of full
thread. Actually, between 65% and 55% of full thread usually gives
adequate strength, together with the added advanta ges of longer tool life
and lower torque requirements.
Recommended Drill Sizes for Thread Form Tapping
Basic
Major
Diameter
.0860
.1120
.1380
.1640
.1900
.2160
.2500
Theoretical Tap Drill Size
55%
Thread
.0793
.1027
.1263
.1523
.1744
.2004
.2313
65%
Thread
.0781
.1010
.1242
.1502
.1716
.1976
.2279
75%
Thread
.0769
.0993
.1221
.1481
.1688
.1948
.2245
Recommended
Tap Drill to Approx.
65% Thread
Drill
Drill
Size
Hole Size
5/64
.0781
38
.1015
1/8
.1250
25
.1495
11/64
.1719
8
.1990
#1
.2280
The follo wing formula, derived from research da ta, may be used in
determining the theoretical drill sizes for various percenta
ges of full
thread.
(
Theor.
Drill Size
)=(
)-(
Basic
Thread OD
)
.0068 x % of Th’d
Threads per inch
Theor. Drill Size (For 55% Th’d) = Basic OD - .374
N
.422
Theor. Drill Size (For 65% Th’d) = Basic OD N
.510
Theor. Drill Size (For 75% Th’d) = Basic OD N
N = Threads per inch
NOTE: The above formula is for a verage conditions. If thread percenta ge
is highly critical, or the workpiece is extremely hard or soft, user must
experiment to arrive at desired hole size.
EXAMPLE: To select the proper ta
tapped hole:
p drill for a 5/16-18 UNC form
Basic Thread O.D. = .3125 Threads per inch = 18
Max Drill Size (For 55% Th’d) = .3125 - .0068x55 = .29172"
18
Min Drill Size (For 75% Th’d) = .3125 - .0068x75 = .28417"
18
Since a size L drill has an ODof .2900", it would be a logical choice.This drill
should give a thread percenta ge of between 55% and 65% of full thread
under average conditions.
29
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
MALE/FEMALE THREADED STANDOFF
with Hi-Torque Locking and Grounding Feature
If a different A or B dimension,
is required, see note below.
ORDER EXAMPLE:
14400 - H - SS - .250 - 12
Hex (H) or
Square (S)
Basic
Part
Number
Material:
See chart
Length:
Fill in your length,
any increment
!
Finish:
See page
277
If a deeper thread
depth is required,
the integrity of
the male thread
can be jeopardized
due to the drill
depth.
If dimensional or thread change is required (A or B), add to part number.
EXAMPLE: 14400-H-SS-.250-12 (B=440 x 3/8)
Both Thread and Length must be specified.
Thread
B
A Thread
Depth Min*
Min. L*
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
12-24
3/16
1/4
3/8
7/16
1/2
1/2
1/2
1/2
3/16
1/4
3/8
7/16
1/2
1/2
1/2
1/2
1/4
3/8
7/16
1/2
5/8
5/8
5/8
5/8
D
5/32
3/16
1/4
5/16
3/8
30
Thread
2-56
4-40
2-56
4-40
6-32
2-56
4-40
6-32
8-32
2-56
4-40
6-32
8-32
10-32
2-56
4-40
6-32
8-32 14434
Available Material
(see page 275)
A
B
S
SS
Aluminum
Brass
Steel
Stainless Steel
(see chart at left for details )
*When the body length L is less than
or equal to the thread depth A, the
maximum number of threads
possible will be provided.
Basic
Part Number
14400
14402
14404
14406
14408
14410
14412
14414
14415
14418
14420
14422
14424
14426
14428
14430
14432
H or S
TECH
TIP
Material
Length
Finish
NOTE: See page 29 for Self-Forming Male/Female Standof fs.
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
MALE/FEMALE THREADED STANDOFF
with Hi-Torque Locking and Grounding Feature
If a different A or B dimension,
is required, see note below.
ORDER EXAMPLE:
14436 - H - SS - .250 - 12
Hex (H) or
Square (S)
Basic
Part
Number
Material:
See chart
Length:
Fill in your length,
any increment
!
Finish:
See page
277
If a deeper thread
depth is required,
the integrity of
the male thread
can be jeopardized
due to the drill
depth.
If dimensional or thread change is required (A or B), add to part number.
EXAMPLE: 14436-H-SS-.250-12 (B=440 x 3/8)
Both Thread and Length must be specified.
Thread
B
A Thread
Depth Min*
Min. L*
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
12-24
3/16
1/4
3/8
7/16
1/2
1/2
1/2
1/2
3/16
1/4
3/8
7/16
1/2
1/2
1/2
1/2
1/4
3/8
7/16
1/2
5/8
5/8
5/8
5/8
D
Thread
3/8
10-32
2-56
4-40
6-32
8-32
10-24
10-32
12-24
1/4-20
2-56
4-40
6-32
8-32
10-24
10-32
12-24
1/4-20
7/16
1/2
Available Material
(see page 275)
A
B
S
SS
Aluminum
Brass
Steel
Stainless Steel
(see chart at left for details )
*When the body length L is less than
or equal to the thread depth A, the
maximum number of threads
possible will be provided.
Basic
Part Number
14436
14460
14462
14464
14466
14468
14470
14472
14474
14476
14478
14480
14482
14484
14486
14488
14490
NOTE: See page 29 for Self-Forming Male/Female Standof fs.
H or S
TECH
TIP
Material
Length
Finish
31
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
MALE/FEMALE LOCKING THREADED
STANDOFF ASSEMBLY
ORDER EXAMPLE:
14021 - H - .500 - SS - A - 12
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Length:
Fill in your length,
any increment
Material:
See chart
Assembly
Finish:
See page 277
If a different male Leng h (B) or a dif ferent internal thread depth in female A is required,
add requirement to the part number.
Example: 14021-H-.500-SS-A-12 (A = 4-40 x 1/4 deep)
Available Material
Standoff
B
Brass, Composition 360
S
Steel Low Carbon 1018
SS
D
1/4
5/16
3/8
32
Captive Washer
Internal Tooth Lock Washer
Brass conforming to ASTM B3
Carbon Steel conforming to
ASTM 108 ASTM - A 569
Stainless Steel conforming to
AISI Type 302 or 305
Stainless Steel 18-8
302 - 304 Series
Thread Data
Basic
Part
Number
Size
B
Length
14021
14031
14041
14051
14061
14071
14081
14091
14101
14111
14121
14131
14141
14151
2-56
4-40
6-32
8-32
2-56
4-40
6-32
8-32
10-32
2-56
4-40
6-32
8-32
10-32
3/16
1/4
3/8
7/16
3/16
1/4
3/8
7/16
1/2
3/16
1/4
3/8
7/16
1/2
Captive
Washer
A Thd
Outside Dia
Depth Min*
± 1/64
3/16
1/4
1/4
5/16
3/8
5/16
7/16
3/8
3/16
3/8
1/4
3/8
3/8
3/8
7/16
3/8
1/2
7/16
3/16
7/16
1/4
7/16
3/8
7/16
7/16
7/16
1/2
7/16
Material - Spring Steel per
QQ-S-700
Finish - Cadmium Plate per
QQ-P-416 (Clear)
Internal Tooth Lock Washer
Outside Dia
Thickness
Min
Max
Min
Max
.175
.255
.275
.325
.175
.255
.275
.325
.365
.175
.255
.275
.325
.365
.200
.270
.295
.340
.200
.270
.295
.340
.381
.200
.270
.295
.340
.381
.010
.015
.017
.018
.010
.015
.017
.018
.020
.010
.015
.017
.018
.020
.015
.019
.021
.023
.015
.019
.021
.023
.025
.015
.019
.021
.023
.025
*A dimension will be maximum depth (minimum or 1-1/2 threads).
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
MALE/FEMALE LOCKING THREADED
STANDOFF ASSEMBLY
ORDER EXAMPLE:
14161 - H - .500 - SS - A - 12
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Length:
Fill in your length,
any increment
Material:
See chart
Assembly
Finish:
See page 277
If a different male Leng h (B) or a dif ferent internal thread depth in female A is required,
add requirement to the part number.
Example: 14161-H-.500-SS-A-12 (A = 4-40 x 1/4 deep)
Available Material
Standoff
B
S
SS
D
7/16
1/2
Captive Washer
Brass, Composition 360
Steel Low Carbon 1018
Brass conforming to ASTM B3
Carbon Steel conforming to
ASTM 108 ASTM - A 569
Stainless Steel conforming to
AISI Type 302 or 305
Stainless Steel 18-8
302 - 304 Series
Thread Data
Basic
Part
Number
Size
14161
14171
14181
14191
14211
14231
14241
14251
14261
14271
14291
14311
2-56
4-40
6-32
8-32
10-32
1/4-20
2-56
4-40
6-32
8-32
10-32
1/4-20
Internal Tooth Lock Washer
B
Length
3/16
1/4
3/8
7/16
1/2
1/2
3/16
1/4
3/8
7/16
1/2
1/2
*A dimension will be maximum depth (minimum or 1-1/2 threads).
Captive
Washer
A Thd
Outside Dia
Depth Min*
± 1/64
3/16
1/4
3/8
7/16
1/2
1/2
3/16
1/4
3/8
7/16
1/2
1/2
1/2
9/16
Material - Spring Steel per
QQ-S-700
Internal Tooth Lock Washer
Outside Dia
Thickness
Min
Max
Min
Max
.175
.255
.275
.325
.365
.460
.175
.255
.275
.325
.365
.460
.200
.270
.295
.340
.381
.478
.200
.270
.295
.340
.381
.478
.010
.015
.017
.018
.020
.023
.010
.015
.017
.018
.020
.023
.015
.019
.021
.023
.025
.028
.015
.019
.021
.023
.025
.028
33
1-888-208-2008
STANDOFFS & SPACERS
STANDOFFS & SPACERS
DOUBLE-ENDED MALE STANDOFFS
(see page 109)
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phenolic (Paper)
Phl**
Phenolic (Linen)
L** Polycarbonate
(Lexan)
PA**
A.B.S.
PP**
P.V.C.
T
Teflon
F**
F ber
**Supplied in round only.
ORDER EXAMPLE:
20500 - H - SS - .250 - 12
Basic
Part
Number
Hex (H),
Round (R) or
Square (S)
Material:
See chart
Length:
Fill in your length,
any increment
Finish:
See page
277
EXAMPLE FOR NYLON AND DELRIN PARTS: 20500-H-N-.250-2
BLACK
Choose color from chart, otherwise Natural is provided.
When A and B threads are different, specify both Thread and Leng h,
add them to the closest part number .
EXAMPLE: 20500-H-SS-.250-12 (A-4-40 X 1/4, B=6-32 X 3/8)
34
Fax (973) 244-9177
www.accuratescrew.com
D x THD
Basic Part Number
3/16 x 2-56
3/16 x 4-40
1/4 x 2-56
1/4 x 4-40
1/4 x 6-32
1/4 x 8-32
5/16 x 2-56
5/16 x 4-40
5/16 x 6-32
5-16 x 8-32
5/16 x 10-32
3/8 x 2-56
3/8 x 4-40
3/8 x 6-32
3/8 x 8-32
3/8 x 10-32
3/8 x 1/4-20
3/8 x 1/4-28
20500
20502
20504
20506
20508
20510
20512
20514
20516
20518
20520
20522
20524
20526
20528
20530
20532
20533
H or R or S
Thread
A-B
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
1/4-28
3/16
1/4
3/8
7/16
1/2
1/2
1/2
1/2
!
Material
Color
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
Code
1
2
3
4
5
6
7
8
9
TECH TIP
All standoffs and spacers
can be dimensionally
customized to fit
your application.
Length
Finish
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
DOUBLE-ENDED MALE STANDOFFS
(see page 109)
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phenolic (Paper)
Phl**
Phenolic (Linen)
L** Polycarbonate
(Lexan)
PA**
A.B.S.
PP**
P.V.C.
T
Teflon
F**
F ber
**Supplied in round only.
ORDER EXAMPLE:
20034 - H - SS - .250 - 12
Basic
Part
Number
Hex (H),
Round (R) or
Square (S)
Material:
See chart
Length:
Fill in your length,
any increment
Finish:
See page
277
EXAMPLE FOR NYLON AND DELRIN PARTS: 20034-H-N-.250-2
BLACK
Choose color from chart, otherwise Natural is provided.
When A and B threads are different, specify both Thread and Leng h,
add them to the closest part number .
EXAMPLE: 20034-H-SS-.250-12 (A-4-40 X 1/4, B=6-32 X 3/8)
D x THD
Basic Part Number
7/16 x 2-56
7/16 x 4-40
7/16 x 6-32
7/16 x 8-32
7/16 x 10-24
7/16 x 10-32
7/16 x 1/4-20
7/16 x 1/4-28
1/2 x 2-56
1/2 x 4-40
1/2 x 6-32
1/2 x 8-32
1/2 x 10-24
1/2 x 10-32
1/2 x 1/4-20
1/2 x 1/4-28
20034
20036
20038
20040
20042
20044
20046
20048
20050
20052
20054
20056
20058
20060
20062
20064
H or R or S
Thread
A-B
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
1/4-28
3/16
1/4
3/8
7/16
1/2
1/2
1/2
1/2
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
Material
1
2
3
4
5
6
7
8
9
Length
Finish
35
1-888-208-2008
STANDOFFS & SPACERS
STANDOFFS & SPACERS
DOUBLE-ENDED MALE STANDOFFS
with Hi-Torque Feature
(see page 109)
ORDER EXAMPLE:
20600 - H - SS - .250 - 12
Basic
Part
Number
Hex (H),
Round (R) or
Square (S)
Material:
See chart
Length:
Fill in your length,
any increment
Finish:
See page
277
When A and B threads are different, specify both Thread and Leng h,
add them to the closest part number .
EXAMPLE: 20600-H-SS-.250-12 (A-4-40 X 1/4, B=6-32 X 3/8)
36
Fax (973) 244-9177
www.accuratescrew.com
D x THD
Basic Part Number
3/16 x 2-56
3/16 x 4-40
1/4 x 2-56
1/4 x 4-40
1/4 x 6-32
1/4 x 8-32
5/16 x 2-56
5/16 x 4-40
5/16 x 6-32
5/16 x 8-32
5/16 x 10-32
3/8 x 2-56
3/8 x 4-40
3/8 x 6-32
3/8 x 8-32
3/8 x 10-32
3/8 x 1/4-20
3/8 x 1/4-28
20600
20602
20604
20606
20608
20610
20612
20614
20616
20618
20620
20622
20624
20626
20628
20630
20632
20634
H or R or S
Thread
A-B
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
1/4-28
3/16
1/4
3/8
7/16
1/2
1/2
1/2
1/2
Material
Available Material (see page 275)
A
B
S
SS
Length
Aluminum
Brass
Steel
Stainless Steel
Finish
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
DOUBLE-ENDED MALE STANDOFFS
with Hi-Torque Feature
(see page 109)
ORDER EXAMPLE:
20636 - H - SS - .250 - 12
Hex (H),
Round (R) or
Square (S)
Basic
Part
Number
Material:
See chart
Length:
Fill in your length,
any increment
Finish:
See page
277
When A and B threads are different, specify both Thread and Leng h,
add them to the closest part number .
EXAMPLE: 20636-H-SS-.250-12 (A-4-40 X 1/4, B=6-32 X 3/8)
D x THD
Basic Part Number
7/16 x 2-56
7/16 x 4-40
7/16 x 6-32
7/16 x 8-32
7/16 x 10-24
7/16 x 10-32
7/16 x 1/4-20
7/16 x 1/4-28
1/2 x 2-56
1/2 x 4-40
1/2 x 6-32
1/2 x 8-32
1/2 x 10-24
1/2 x 10-32
1/2 x 1/4-20
1/2 x 1/4-28
20636
20638
20640
20642
20644
20646
20648
20650
20652
20654
20656
20658
20660
20662
20664
20666
!
H or R or S
Thread
A-B
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
1/4-28
3/16
1/4
3/8
7/16
1/2
1/2
1/2
1/2
Material
Available Material (see page 275)
A
B
S
SS
Aluminum
Brass
Steel
Stainless Steel
Length
Finish
TECH TIP
Be sure to check out our new 3D CAD model repository at
www.accuratescrew.com. Each model is custom generated
as per your specifications.
37
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
KNURLED MALE/FEMALE THREADED STANDOFF
(see page 109)
Available Material (see page 275)
A
B
S
SS
Aluminum
Brass
Steel
Stainless Steel
ORDER EXAMPLE:
113918 - A - .500 - 1
Basic
Part
Number
Material:
See chart
Length:
Fill in your length,
any increment
Finish:
See page 277
If different Thread or Length is required, add to the closest part number .
EXAMPLE: 113918-A-.500-1 MOD (B= 4-40 x 1/2 Lg.)
OD x Thd
Diameter before Knurl
5/32 x 2-56
5/32 x 4-40
3/16 x 2-56
3/16 x 4-40
3/16 x 6-32
1/4 x 2-56
1/4 x 4-40
1/4 x 6-32
1/4 x 8-32
5/16 x 2-56
5/16 x 4-40
5/16 x 6-32
5/16 x 8-32
5/16 x 10-32
3/8 x 2-56
3/8 x 4-40
3/8 x 6-32
3/8 x 8-32
3/8 x 10-32
7/16 x 2-56
7/16 x 4-40
7/16 x 6-32
7/16 x 10-32
1/2 x 4-40
1/2 x 6-32
1/2 x 8-32
1/2 x 10-32
1/2 x 1/4-20
38
Basic
Part Number
113918
113920
113922
113924
113926
113928
113930
113932
113934
113936
113938
113940
113942
113944
113946
113948
113950
113952
113954
113956
113958
113960
113962
113964
113966
113968
113972
113974
Thread
B
2-56
4-40
6-32
8-32
10-32
1/4-20
3/16
1/4
3/8
7/16
1/2
1/2
A Thread
Depth Min*
3/16
1/4
3/8
7/16
1/2
1/2
*When the body length L is less than or equal
to the thread depth A, the maximum of threads
possible will be provided.
Material
Length
Finish
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
MALE/FEMALE THREADED SPACER
with Self-Locating Feature
(see page 109)
Available Material (see page 275)
ORDER EXAMPLE:
3866 - H - .500 - .055 - A - 3
Hex (H) or
Round (R)
Basic
Part
Number
D
Dim.
Length:
Fill in your length,
any increment
Material:
See chart
Finish:
See page 277
A Min
B
C +.000
-.003
E +.005
2-56
4-40
6-32
8-32
10-32
10-24
1/4-20
1/4-28
3/16
1/4
3/8
7/16
1/2
1/2
1/2
1/2
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
.188
.188
.234
.234
.312
.312
.375
.375
.230
.230
.275
.275
.350
.350
.415
.415
OD or Hex
1/4
5/16
3/8
1/2
5/8
Thread
2-56
4-40
8-32
6-32
8-32
10-32
6-32
8-32
10-32
1/4-20
1/4-28
6-32
8-32
10-32
1/4-20
1/4-28
Board
or Panel
Thickness
D
Recommended
Shank Length
1/32
1/16
3/32
1/8
3/16
1/4
.025
.055
.085
.118
.180
.240
Basic Part No. Hex or Round
L*
Aluminum
B
Brass
S
Steel
SS
Any one dimension change, add to part number . EXAMPLE: 3866-H-.500-.055-A-3 (MOD B=250)
FOR NYLON AND DELRIN PARTS: Choose color from chart, otherwise Natural is provided.
Part number for nylon and Delrin parts: EXAMPLE: 3866-H-.500-.055-N-3
RED
Thread
A
Stainless Steel
N
Nylon
D
Delrin
NYLON AND DELRIN
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
D
Material
1
2
3
4
5
6
7
8
9
Finish
3866
3868
3872
3876
3878
3880
3882
3884
3886
3888
3890
3892
3894
3896
3898
3900
*When L dimension is equal to or smaller than A, the depth will be maximum possible or a minimum of 1-1/2 threads, whichever is greater.
39
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
MALE/FEMALE LOCKING THREADED STANDOFF
ORDER EXAMPLE:
14000 - H - SS - .250 - LSS
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Standoff
Material:
See chart
Length L:
Fill in your length,
any increment
-
Lock Washer
Material:
Stainless (LSS)
or Steel (LS)
Male/Female Standoff
Available Material
(see page 275)
12
Finish:
See page 277
A
B
C
S
SS
NOTE: To order Lock Washer in Steel (1040/1060) just add LS to end of part number.
EXAMPLE: 14000-H-SS-.250-LS-12
OD
3/16
1/4
5/16
3/8
7/16
1/2
40
Thread
2-56
4-40
2-56
4-40
2-56
4-40
6-32
8-32
10-32
2-56
4-40
6-32
8-32
10-32
2-56
4-40
6-32
8-32
10-24
10-32
12-24
2-56
4-40
6-32
8-32
10-24
10-32
12-24
Basic
Part Number
14000
14010
14020
14030
14060
14070
14080
14090
14100
14110
14120
14130
14140
14150
14160
14170
14180
14190
14200
14210
14220
14240
14250
14260
14270
14280
14290
14300
Thread
2-56
4-40
6-32
8-32
10-24
10-32
Washer Size
B
Outside
Diameter
C
Thickness
A
Inside
Diameter
Min
Max
Min
Max
Min
Max
.115
.141
.168
.195
.258
.258
.245
.305
.365
.395
.494
.494
.260
.320
.381
.410
.510
.510
.015
.016
.018
.020
.023
.023
.019
.022
.029
.025
.028
.028
.123
.150
.176
.204
.267
.267
Aluminum
Brass
Copper
Steel
Stainless Steel
Lock Washer
Finish
Material
S
Steel - 1040/1060
Zinc Chrome Clear
SS Stainless Steel - 410
NONE
Thread
B
A Thread
Depth Min*
2-56
4-40
6-32
8-32
10-24
10-32
3/16
1/4
3/8
7/16
1/2
1/2
5/32
3/16
1/4
3/8
3/8
3/8
*When the body length L is less than or
equal to the thread depth A, the
maximum of threads possible will be
provided.
!
TECH
TIP
Our new in-house
passivation process,
certified to QQP35CAMS2700B-MIL F
14072D, further
improves our lead
times.
NOTE: For depth of hread, see page 281.
1-888-208-2008
MALE SPACE ADAPTERS
Available Material (see page 275)
A
C
PA
PP
D
Aluminum
Copper
A.B.S.
P.V.C.
Delrin
B
S
SS
N
Brass
Steel
Stainless Steel
Nylon
ORDER EXAMPLE:
8300 - H - SS - 632 - 632 - 12
Basic
Hex (H),
Material:
Thread C
Thread A
Finish:
Part
Round (R)
See chart
See page
Number
or Square (S)
277
If a different thread or length is required, add to end of part number . EXAMPLE: 8300-H-SS-632-632-12 (D=.875)
FOR NYLON AND DELRIN PARTS: Choose color from chart, otherwise Natural is provided.
Part number for Nylon and Delrin parts: EXAMPLE: 8300-H-N-632-632-2
BLACK
Color
Natural
Black
Red
NYLON AND DELRIN
Code
Color
Code
1
2
3
Blue
Purple
Brown
4
5
6
Code
Orange
Green
Yellow
7
8
9
2-56
4-40
6-32
8-32
1/4
5/16
Thread
Color
E
10-24
10-32
1/4-20
3/8
D
B
± .015
± .015
.187
.250
.250
.375
.375
.250
.250
.375
.250
.375
.500
.187
.187
.250
.250
.375
.187
.250
.375
.250
.375
.500
Basic
Part No.
8300
8302
8304
8306
8308
8310
8312
8314
8316
8318
8320
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
HEX JACK SCREW - 3/16
Supplied unassembled with:
Two (2) #4 Flat Washers
One (1) #4 Lock Washer
One (1) #4-40 Nut
ORDER EXAMPLE:
67664 - S - 8
Basic
Material:
Finish:
Part
See chart
See page
Number
277
**Length may vary to your specification.
EXAMPLE: 67664-S-8 (L=.500)
Part No.
A ± .015
67664
67666
67668
67670
67672
67674
67676
67678
67680
67682
.187
.250
.312
.375
.437
.500
.562
.625
.687
.750
Available Material (see page 275)
B
D*
S
SS
Brass
Delrin
Steel
Stainless Steel
* Less Lock Washer
41
1-888-208-2008
STANDOFFS & SPACERS
STANDOFFS & SPACERS
MALE STANDOFF - SHOULDER TYPE
ORDER EXAMPLE:
3920 - H SS - 12
Basic
Part Number
Hex (H),
Round (R) or
Square (S)
Material:
See chart
Available Material (see page 275)
Finish:
See page 277
Any one dimension change, add to the end of part number .
Example: 3920-H-SS-12 (T=.200)
Screw Driver Slot is available, add SDS to part number . Example: 3920-H-SS-12 SDS
Part A
Number
3920
3922
3924
3925
3927
3928
3930
3932
3934
3936
3937
3938
3939
3940
3941
3942
3943
3948
3950
3951
3952
3954
3955
3956
3958
3960
3961
3962
3964
3966
3968
3970
3972
42
Fax (973) 244-9177
www.accuratescrew.com
B
+.000
–.003
± .003
.1245
.1245
.1245
.1245
.1245
.1245
.156
.156
.156
.156
.156
.156
.156
.156
.156
.156
.156
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
.125
.187
.250
.312
.437
.500
.125
.187
.250
.312
.375
.437
.500
.562
.625
.687
.750
.125
.187
.250
.312
.375
.437
.500
.562
.625
.687
.750
.875
1.000
1.250
1.375
1.500
C
OD
1/4
1/4
1/4
1/4
1/4
1/4
9/32
9/32
9/32
9/32
9/32
9/32
9/32
9/32
9/32
9/32
9/32
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
T
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.156
.156
.156
.156
.156
.156
.156
.156
.156
.156
.156
.156
.156
.156
.156
.156
ROUND
ONLY
Thread Length
440
440
440
440
440
440
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
5/32
5/32
5/32
5/32
5/32
5/32
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
A
Aluminum
B
Brass
S
Steel
SS
Stainless Steel
N
Nylon
C Copper
D
Delrin
Part A +.000
–.003
Number
3973 .250
3974 .250
3975 .250
3976 .250
3977 .250
3978 .250
3979 .250
3980 .250
3981 .250
3982 .250
3983 .250
3984 .250
3985 .250
3986 .250
3987 .250
3989 .312
3990 .312
3991 .312
3992 .312
3993 .312
3994 .312
3995 .312
3996 .312
3997 .312
3998 .312
3999 .312
4000 .312
4001 .312
4002 .312
4003 .312
B
± .003
.125
.187
.250
.312
.437
.500
.562
.625
.687
.750
.875
1.000
1.250
1.375
1.500
.125
.187
.250
.312
.437
.500
.562
.625
.687
.750
.875
1.000
1.250
1.375
1.500
C
OD
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
T
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
.250
Thread Length
1032
1032
1032
1032
1032
1032
1032
1032
1032
1032
1032
1032
1032
1032
1032
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
MALE KNURLED STANDOFF
Available Material (see page 275)
ORDER EXAMPLE:
901500 - H - .125 - A - 23
Basic
Part
Number
Hex (H) or
Round (R)
Rec. Knurled
Shank Length C:
See chart
Material:
See chart
Finish:
See page
277
A
B
S
SS
Aluminum
Brass
Steel
Stainless Steel
Board
Thickness
C
Rec. Knurled
Shank Length
+ .007
1/32
1/16
3/32
1/8
3/16
1/4
.032
.062
.093
.125
.187
.250
Make any one dimensional change by adding to the end of the part number .
EXAMPLE: 901500-H-.125-A-23 (B=.500)
*Thickness may be revised simply by adding change to end of part number .
EXAMPLE: 901500-H-.125-A-23 (T=.093)
K
Knurl Dia
Recommended
Drill Hole Size
± .010
D
Round
or Hex
± .003
+ .002 - .000
Basic
Part Number
3/16
1/4
3/8
7/16
1/2
1/2
5/8
7/8
1.00
1.00
.250
.250
.312
.312
.375
.500
.625
.500
.562
.625
.152
.152
.201
.201
.247
.267
.299
.366
.426
.550
.145
.145
.194
.194
.240
.260
.290
.358
.417
.542
901500
901502
901504
901506
901508
901510
901512
901514
901516
901518
Thread
Size
**B
Shank Length
2-56
4-40
6-32
8-32
10-32
1/4-20
1/4-20
5/16-18
3/8-16
1/2-13
OPTIONAL - NO COLLAR
EXAMPLE: 901500-H-.125-A-23 (MOD. NO COLLAR)
43
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
DOUBLE-ENDED MALE KNURLED STANDOFF
Available Material (see page 275)
ORDER EXAMPLE:
901501 - H - .125 - A - 23
Basic
Part
Number
Hex (H) or
Round (R)
Rec. Knurled
Shank Length C:
See chart
Material:
See chart
A
B
S
SS
Board
Thickness
C
Rec. Knurled
Shank Length
+.007
1/32
1/16
3/32
1/8
3/16
1/4
.032
.062
.093
.125
.187
.250
Finish:
See page
277
Make any one dimensional change by adding to the end of the part number .
EXAMPLE: 901501-H-.125-A-23 (B=.250)
**Thickness may be revised simply by adding change to end of part number .
EXAMPLE: 901501-H-.125-A-23 (T=.093)
44
Aluminum
Brass
Steel
Stainless Steel
K
Knurl Dia
Recommended
Drill Hole Size
± .010
D
Round
or Hex
± .003
+.002 -.000
Basic
Part Number
3/16
1/4
3/8
7/16
1/2
1/2
5/8
7/8
1.00
1.00
.250
.250
.312
.312
.375
.500
.625
.500
.562
.625
.152
.152
.201
.201
.247
.267
.299
.366
.426
.550
.145
.145
.194
.194
.240
.260
.290
.358
.417
.542
901501
901503
901505
901507
901509
901511
901513
901515
901517
901519
Thread
Size
A& B
Shank Length
2-56
4-40
6-32
8-32
10-32
1/4-20
1/4-20
5/16-18
3/8-16
1/2-13
1-888-208-2008
INSTALLATION OF SWAGE
AND FLARE TYPE STANDOFFS
ADVANTAGES
ASM Swage and Flare Type Standoffs are an inexpensive method of
spacing or mounting electronic circuit boards and electronic
components. After installation they are permanently affixed to the
board and further assembly becomes simplified. These standoffs
are available in both threaded and unthreaded types (see Hi-Torque
Standoffs).
INSTALLATION
Installation is accomplished by using an y means of force. Normal
equipment, such as an arbor press, punch press, drill press, are
most commonly used. If flare type is planned, the hole must be
countersunk as sho wn in the illustra tion. For s wage type
installation, an ordinar y drilled or punched hole, of the correct
diameter, is adequate.
TOOLING
Punches and anvils are a vailable for all standoffs. See Standoff
pages for more information.
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
NOTE: During and after installation, cracking may occur around the perimeter of the shank.
The cracking does not affect form, fit or function.
SWAGE TYPE AND TOOLING
FLARE TYPE AND TOOLING
A STANDOFF THAT WON’T SPIN!
Hi-Torque hex swage standoff with a locking feature that ends loosening & spinning problems
HI-TORQUE SWAGE STANDOFF
HI-TORQUE HEX SWAGE
GRIPPING STANDOFF*
HEX SWAGE
NO-GRIP STANDOFF
Up to 23 in/lb - 6 Flats Really Grip!
Conventional No-Grip!
Six flats really grip the board to provide the highest
torque installation achievable yet.
No
additional
tooling
required.
*This feature is also available for Male/Female
Standoffs see pages 27-28.
INCREASE TORQUE!
For POSITIVE LOCKING Standoffs,
see pages 72-78.
For FULL KNURL Positive Locking Standoffs,
see pages 79-88.
Same installation instructions as Swage and Flare
type standoffs, except the appropriate hole size
and tolerance is shown on each page.
ORDER EXAMPLE:
13010 - H - A - .075 - 1 - HT
Basic
Part
Number
Hex (H)
Material*
Shank Length:
Fill in your length,
any increment
Finish:
See page
277
Hi-Torque
Option
*Refer to Threaded Standoffs on pages 46-89 for basic configura ion, specifications,
material, etc.
Hi-torque option is available for Male/Female Standof fs (see pages 27-28).
Add HT to end of part number. EXAMPLE: 14010-H-A-.750-1 HT
45
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
SWAGE STANDOFFS - THREADED & CLEAR HOLE
1/8" Hex or Round - 0-80 Thd.
Ct. Bore .063 +– .003
.000
0-80
Thread
+ .000
1/8
.090 – .003
Available Material (see page 275)
A
B
C
S
SS
N
D
See page 281 for dep h of thread.
See page 45 for installation instructions.
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
F ber
Board
Thickness
Recommended
Shank Length
for Swage
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
Available ID and Appropriate Code
ID +.010
Code Letter
–.000
.070
**Supplied in round only.
.070 - ID
Hex (H) or
Round (R)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Swage Tooling
Finish:
See page
277
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 11022-R-SS-.105-12 (L=.525)
Punch
Part Number
P-1
EXAMPLE:
46
P
Prefix letter code to part number.
EXAMPLE: P11010-H-SS-.105-12
ORDER EXAMPLE:
11010 - H - SS - .105 - 12
Basic
Part
Number
CLEAR HOLE STANDOFFS
L Length
Thread
Basic
Part Number
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-3/16
1-1/4
1-3/8
1-1/2
1-3/4
2
0-80
0-80
0-80
0-80
0-80
0-80
0-80
0-80
0-80
0-80
0-80
0-80
0-80
0-80
0-80
0-80
0-80
0-80
0-80
0-80
0-80
11010
11012
11014
11016
11018
11020
11022
11024
11026
11028
11030
11032
11034
11036
11038
11040
11042
11044
11046
11048
11050
H or R
P-1
Material
Anvil Part Number
Round
He x
RA -10
HA-40
RA-11
HA-41
RA-12
HA-42
RA-13
HA-43
PUNCH
HA - 40
Shank Length
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
Finish
NOTE: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
1-888-208-2008
SWAGE STANDOFFS - THREADED & CLEAR HOLE
5/32" Hex or Round - 2-56 Thd.
Ct. Bore .098 +– .003
.000
2-56
Thread
+ .000
5/32
.125 – .003
Available Material (see page 275)
A
B
C
S
SS
N
D
See page 281 for depth of thread.
See page 45 for installation instructions.
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
F ber
Board
Thickness
Recommended
Shank Length
for Swage
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
Available ID and Appropriate Code
ID
+.010
–.000
Code Letter
.070
.091
**Supplied in round only.
P
Q
Prefix letter code to part number.
EXAMPLE: P21010-H-SS-.105-12
ORDER EXAMPLE:
21010 - H - SS - .105 - 12
Basic
Part
Number
CLEAR HOLE STANDOFFS
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
Hex (H) or
Round (R)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
.070 - ID
Swage Tooling
Finish:
See page
277
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 21054-R-SS-.105-12 (L=.525)
Punch
Part Number
L Length
Thread
Basic
Part Number
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-3/16
1-1/4
1-3/8
1-1/2
1-3/4
2
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
21010
21020
21030
21040
21050
21052
21054
21056
21058
21060
21062
21064
21066
21068
21070
21072
21074
21076
21078
21080
21082
NOTE: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
H or R
RA -14
RA-15
RA-16
RA-17
P-2
EXAMPLE:
Anvil Part Number
Round
He x
P-2
Material
PUNCH
HA-44
HA-45
HA-46
HA-47
HA - 44
Shank Length
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
Finish
47
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
SWAGE STANDOFFS - THREADED & CLEAR HOLE
3/16" Hex, Round or Squar e - 2-56 Thd.
Ct. Bore .104 +– .002
.001
2-56
Thread
See page 281 for depth of hread.
See page 45 for installation instructions.
+ .002
3/16
.125 – .001
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
Fiber
Board
Thickness
Recommended
Shank Length
for Swage
CLEAR HOLE STANDOFFS
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
Available ID and Appropriate Code
ID +.010
Code Letter
–.000
.070
.091
**Supplied in round only.
Prefix letter code to part number.
EXAMPLE: P31110-H-SS-.105-12
ORDER EXAMPLE:
31110 - H - SS - .105 - 12 - HT
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
Hi-Torque
Option:
See page
45
.070 - ID
Swage Tooling
Punch
Part Number
P-3
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 31140-R-SS-.105-12 (L=.525)
EXAMPLE:
48
L Length
Thread
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
1
1-3/16
1-1/4
1-3/8
1-1/2
1-3/4
2
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
Basic
Part Number
31110
31115
31120
31125
31130
31135
31140
31145
31150
31155
31160
31162
31165
31170
31172
31174
31176
31178
31180
31182
H or R or S
P
Q
Material
P-3
Anvil Part Number
Round
He x
RA -18
HA-48
RA-19
HA-49
RA-20
HA-50
RA-21
HA-51
PUNCH
Shank Length
HA - 48
Finish
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
HT Option
NOTE: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
1-888-208-2008
SWAGE STANDOFFS - THREADED & CLEAR HOLE
3/16" Hex, Round or Squar e - 3-48 Thd.
Ct. Bore .104 +– .002
.001
3-48
Thread
+ .000
3/16
.125 – .003
Available Material (see page 275)
A
B
C
S
SS
N
D
See page 281 for depth of thread.
See page 45 for installation instructions.
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Recommended
Shank Length
for Swage
.075
.105
.135
.165
.230
.290
Board
Thickness
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
Fiber
1/32
1/16
3/32
1/8
3/16
1/4
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
CLEAR HOLE STANDOFFS
Available ID and Appropriate Code
ID +.010
Code Letter
–.000
.070
.091
**Supplied in round only.
P
Q
Prefix letter code to part number.
EXAMPLE: P41110-H-SS-.105-12
ORDER EXAMPLE:
41110 - H - SS - .105 - 12 - HT
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
Hi-Torque
Option:
See page
45
.070 - ID
Swage Tooling
Punch
Part Number
P-3
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 41140-R-SS-.105-12 (L=.525)
EXAMPLE:
L Length
Thread
Basic
Part Number
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
1
1-1/4
1-1/2
1-3/4
2
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
41110
41115
41120
41125
41130
41135
41140
41145
41150
41155
41160
41162
41165
41170
41172
41174
41176
41178
H or R or S
NOTE: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
Material
P-3
Anvil Part Number
Round
He x
RA -18
HA-48
RA-19
HA-49
RA-20
HA-50
RA-21
HA-51
PUNCH
Shank Length
HA - 48
Finish
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
HT Option
49
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
SWAGE STANDOFFS - THREADED & CLEAR HOLE
3/16" Hex, Round or Squar e - 2-56 Thd.
Ct. Bore .109 +– .002
.001
2-56
Thread
See page 281 for depth of thread.
See page 45 for installation instructions.
+ .000
3/16
.139 – .003
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
Fiber
Board
Thickness
Recommended
Shank Length
for Swage
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
CLEAR HOLE STANDOFFS
Available ID and Appropriate Code
ID +.010
Code Letter
–.000
.070
.091
.115
**Supplied in round only.
Prefix letter code to part number.
EXAMPLE: P31010-H-SS-.105-12
ORDER EXAMPLE:
31010 - H - SS - .105 - 12 - HT
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
Hi-Torque
Option:
See page
45
.070 - ID
Swage Tooling
Punch
Part Number
EXAMPLE:
50
Thread
1/8
5/32
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-3/16
1-1/4
1-3/8
1-1/2
1-3/4
2
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
Basic
Part Number
31010
31012
31015
31020
31025
31030
31035
31040
31045
31050
31055
31060
31062
31065
31067
31070
31072
31074
31076
31078
31080
31082
H or R or S
Material
Anvil Part Number
Round
He x
RA -18
RA-19
RA-20
RA-21
P-3
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 31040-R-SS-.105-12 (L=.525)
L Length
P
Q
U
P-3
PUNCH
Shank Length
HA-48
HA-49
HA-50
HA-51
HA - 48
Finish
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
HT Option
NOTE: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
1-888-208-2008
SWAGE STANDOFFS - THREADED & CLEAR HOLE
3/16" Hex, Round or Squar e - 3-48 Thd.
Ct. Bore .109 +– .002
.001
3-48
Thread
+ .000
3/16
.139 – .003
Available Material (see page 275)
A
B
C
S
SS
N
D
See page 281 for depth of thread.
See page 45 for installation instruc ions.
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
Fiber
Board
Thickness
Recommended
Shank Length
for Swage
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
CLEAR HOLE STANDOFFS
Available ID and Appropriate Code
ID +.010
Code Letter
–.000
.070
.091
.115
**Supplied in round only.
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
Hi-Torque
Option:
See page
45
.070 - ID
Swage Tooling
Punch
Part Number
EXAMPLE:
Thread
Basic
Part Number
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
1
1-3/16
1-1/4
1-3/8
1-1/2
1-3/4
2
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
41010
41015
41020
41025
41030
41035
41040
41045
41050
41055
41060
41062
41065
41070
41072
41018
41021
41023
41026
41028
H or R or S
NOTE: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
Material
Anvil Part Number
Round
He x
RA -18
RA-19
RA-20
RA-21
P-3
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 41040-R-SS-.105-12 (L=.525)
L Length
P
Q
U
Prefix letter code to part number.
EXAMPLE: P41010-H-SS-.105-12
ORDER EXAMPLE:
41010 - H - SS - .105 - 12 - HT
Basic
Part
Number
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
P-3
PUNCH
Shank Length
HA-48
HA-49
HA-50
HA-51
HA - 48
Finish
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
HT Option
51
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
SWAGE STANDOFFS - THREADED & CLEAR HOLE
3/16" Hex, Round or Squar e - 4-40 Thd.
Ct. Bore .113 +– .009
.005
4-40
Thread
See page 281 for depth of thread.
See page 45 for installation instructions.
+ .000
3/16
.139 – .003
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
Fiber
Board
Thickness
Recommended
Shank Length
for Swage
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
CLEAR HOLE STANDOFFS
Available ID and Appropriate Code
ID +.010
Code Letter
.070
.091
.115
**Supplied in round only.
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
Hi-Torque
Option:
See page
45
.070 - ID
Swage Tooling
Punch
Part Number
EXAMPLE:
52
Thread
3/32
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
1
1-3/16
1-1/4
1-3/8
1-1/2
1-3/4
2
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
Basic
Part Number
41073
41074
41076
41078
41080
41082
41084
41086
41088
41090
41092
41094
41095
41096
41098
41099
41075
41077
41079
41081
41083
H or R or S
Material
Anvil Part Number
Round
He x
RA -18
RA-19
RA-20
RA-21
P-3
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 41086-R-SS-.105-12 (L=.525)
L Length
P
Q
U
Prefix letter code to part number.
EXAMPLE: P41073-H-SS-.105-12
ORDER EXAMPLE:
41073 - H - SS - .105 - 12 - HT
Basic
Part
Number
–.000
P-3
PUNCH
Shank Length
HA-48
HA-49
HA-50
HA-51
HA - 48
Finish
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
HT Option
NOTES: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
Counterbore will have score marks from threading operation.
1-888-208-2008
SWAGE STANDOFFS - THREADED & CLEAR HOLE
1/4" Hex, Round or Squar e - 4-40 Thd.
Ct. Bore .113 +– .009
.005
4-40
Thread
See page 281 for depth of thread.
See page 45 for installation instructions.
+ .000
1/4
.139 – .004
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Recommended
Shank Length
for Swage
.075
.105
.135
.165
.230
.290
Board
Thickness
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
Fiber
1/32
1/16
3/32
1/8
3/16
1/4
**Supplied in round only.
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
Hi-Torque
Option:
See page
45
Basic
Part Number
3/32
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/8
1-1/4
1-1/2
1-3/4
2
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
51108
51110
51115
51120
51125
51130
51135
51140
51145
51150
51155
51160
51162
51165
51166
51170
51175
51180
51185
51190
51195
NOTES:
H or R or S
Where L dimension is 1/2 or longer, see page 281 for depth of thread.
Counterbore will have score marks from threading operation.
P
Q
U
Swage Tooling
Punch
Part Number
P-3
EXAMPLE:
Thread
.070
.091
.115
.070 - ID
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 51140-R-SS-.105-12 (L=.525)
L Length
Available ID and Appropriate Code
ID +.010
Code Letter
–.000
Prefix letter code to part number.
EXAMPLE: P51108-H-SS-.105-12
ORDER EXAMPLE:
51108 - H - SS - .105 - 12 - HT
Basic
Part
Number
CLEAR HOLE STANDOFFS
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
Material
P-3
Anvil Part Number
Round
He x
RA -22
HA-52
RA-23
HA-53
RA-24
HA-54
RA-25
HA-55
PUNCH
Shank Length
HA - 52
Finish
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
HT Option
53
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
SWAGE STANDOFFS - THREADED & CLEAR HOLE
1/4" Hex, Round or Squar e - 2-56 Thd.
Ct. Bore .150 +– .002
.001
2-56
Thread
See page 281 for depth of thread.
See page 45 for installation instructions.
+ .000
1/4
.188 – .003
CLEAR HOLE STANDOFFS
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
Fiber
Board
Thickness
Recommended
Shank Length
for Swage
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
.070
.091
.115
.120
**Supplied in round only.
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
Hi-Torque
Option:
See page
45
54
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/8
1-1/4
1-1/2
1-3/4
2
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
Basic
Part Number
52010
52015
52020
52025
52030
52035
52040
52045
52050
52055
52060
52062
52065
52066
52070
52075
52080
52085
52090
52095
H or R or S
W
WW
XX
Swage Tooling
Punch
Part Number
P-4
EXAMPLE:
Thread
.140
.150
.156
.070 - ID
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 52040-R-SS-.105-12 (L=.525)
L Length
P
Q
U
V
Prefix letter code to part number.
EXAMPLE: P52010-H-SS-.105-12
ORDER EXAMPLE:
52010 - H - SS - .105 - 12 - HT
Basic
Part
Number
Available ID and Appropriate Code
+.010 Code Letter ID +.010 Code Letter
–.000
–.000
ID
Material
P-4
Anvil Part Number
Round
He x
RA -22
HA-52
RA-23
HA-53
RA-24
HA-54
RA-25
HA-55
PUNCH
Shank Length
HA - 52
Finish
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
HT Option
NOTE: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
1-888-208-2008
SWAGE STANDOFFS - THREADED & CLEAR HOLE
1/4" Hex, Round or Squar e - 3-48 Thd.
Ct. Bore .150 +– .002
.001
3-48
Thread
See page 281 for depth of thread.
See page 45 for installation instructions.
+ .000
1/4
.188 – .003
CLEAR HOLE STANDOFFS
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
Fiber
Board
Thickness
Recommended
Shank Length
for Swage
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
.070
.091
.115
.120
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
Hi-Torque
Option:
See page
45
Basic
Part Number
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/8
1-1/4
1-1/2
1-3/4
2
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
54010
54012
54014
54016
54018
54020
54022
54024
54026
54028
54030
54032
54034
54036
54038
54040
54042
54044
54046
54048
H or R or S
NOTE: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
W
WW
XX
Swage Tooling
Punch
Part Number
Material
Anvil Part Number
Round
He x
RA -22
RA-23
RA-24
RA-25
P-4
EXAMPLE:
Thread
.140
.150
.156
.091 - ID
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 54022-R-SS-.105-12 (L=.525)
L Length
P
Q
U
V
Prefix letter code to part number.
EXAMPLE: Q54010-H-SS-.105-12
ORDER EXAMPLE:
54010 - H - SS - .105 - 12 - HT
Basic
Part
Number
Available ID and Appropriate Code
Code Letter ID +.010 Code Letter
–.000
+.010
–.000
ID
**Supplied in round only.
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
P-4
PUNCH
Shank Length
HA-52
HA-53
HA-54
HA-55
HA - 52
Finish
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
HT Option
55
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
SWAGE STANDOFFS - THREADED & CLEAR HOLE
1/4" Hex, Round or Squar e - 4-40 Thd.
Ct. Bore .150 +– .002
.001
4-40
Thread
See page 281 for depth of thread.
See page 45 for installation instructions.
+ .000
1/4
.188 – .003
CLEAR HOLE STANDOFFS
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
F ber
Board
Thickness
Recommended
Shank Length
for Swage
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
Hi-Torque
Option:
See page
45
56
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/8
1-1/4
1-1/2
1-3/4
2
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
Basic
Part Number
51010
51015
51020
51025
51030
51035
51040
51045
51050
51055
51060
51062
51065
51066
51070
51075
51080
51085
51090
51095
H or R or S
W
WW
XX
Swage Tooling
Punch
Part Number
P-4
EXAMPLE:
Thread
.140
.150
.156
.070 - ID
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 51040-R-SS-.105-12 (L=.525)
L Length
P
Q
U
V
Prefix letter code to part number.
EXAMPLE: P51010-H-SS-.105-12
ORDER EXAMPLE:
51010 - H - SS - .105 - 12 - HT
Hex (H),
Round (R)
or Square (S)
–.000
.070
.091
.115
.120
**Supplied in round only.
Basic
Part
Number
Available ID and Appropriate Code
+.010 Code Letter ID +.010 Code Letter
–.000
ID
Material
P-4
Anvil Part Number
Round
He x
RA -22
HA-52
RA-23
HA-53
RA-24
HA-54
RA-25
HA-55
PUNCH
Shank Length
HA - 52
Finish
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
HT Option
NOTE: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
1-888-208-2008
SWAGE STANDOFFS - THREADED & CLEAR HOLE
1/4" Hex, Round or Squar e - 6-32 Thd.
Ct. Bore .150 +– .003
.001
6-32
Thread
See page 281 for depth of thread.
See page 45 for installation instructions.
+ .000
1/4
.188 – .003
CLEAR HOLE STANDOFFS
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
Fiber
Board
Thickness
Recommended
Shank Length
for Swage
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
Available ID and Appropriate Code
Code Letter ID +.010 Code Letter
ID +.010
–.000
–.000
.091
.115
.120
**Supplied in round only.
Basic
Part
Number
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
Hi-Torque
Option:
See page
45
Basic
Part Number
1/8
3/16
7/32
1/4
9/32
5/16
11/32
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
61010
61015
61017
61020
61022
61025
61027
61030
61035
61040
61045
61050
61055
61060
61062
61065
61067
61070
61075
61080
61081
61085
61087
61089
H or R or S
NOTE: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
W
WW
XX
Swage Tooling
Punch
Part Number
P-4
EXAMPLE:
Thread
.140
.150
.156
.091 - ID
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 61040-R-SS-.105-12 (L=.525)
L Length
Q
U
V
Prefix letter code to part number.
EXAMPLE: Q61010-H-SS-.105-12
ORDER EXAMPLE:
61010 - H - SS - .105 - 12 - HT
Hex (H),
Round (R)
or Square (S)
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
Material
P-4
Anvil Part Number
Round
He x
RA -22
HA-52
RA-23
HA-53
RA-24
HA-54
RA-25
HA-55
PUNCH
Shank Length
HA - 52
Finish
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
HT Option
57
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
SWAGE STANDOFFS - THREADED & CLEAR HOLE
1/4" Hex, Round or Squar e - 8-32 Thd.
Ct. Bore .175 +– .002
.001
8-32
Thread
See page 281 for depth of thread.
See page 45 for installation instructions.
+ .000
1/4
.215 – .003
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
F ber
Board
Thickness
Recommended
Shank Length
for Swage
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
**Supplied in round only.
ORDER EXAMPLE:
62200 - H - SS - .105 - 12 - HT
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
Hi-Torque
Option:
See page
45
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 62218-R-SS-.105-12 (L=.525)
58
L Length
Thread
1/8
3/16
7/32
1/4
9/32
5/16
11/32
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
Basic
Part Number
62200
62202
62204
62206
62208
62210
62212
62214
62216
62218
62220
62222
62224
62226
62228
62230
62232
62234
62236
62238
62240
62242
62244
62246
H or R or S
Material
CLEAR HOLE STANDOFFS
ID
Available ID and Appropriate Code
+.010 Code Letter ID +.010 Code Letter
–.000
–.000
.091
.115
.120
.140
Q
U
V
W
.150
.156
.171
WW
XX
X
Prefix letter code to part number.
EXAMPLE: Q62200-H-SS-.105-12
.091 - ID
STAKING TOOLS
ARE NOT AVAILABLE
FOR THIS PART NUMBER
Shank Length
Finish
HT Option
NOTE: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
1-888-208-2008
SWAGE STANDOFFS - THREADED & CLEAR HOLE
5/16" Hex, Round or Squar e - 6-32 Thd.
Ct. Bore .201 +– .002
.001
6-32
Thread
See page 281 for depth of thread.
See page 45 for installation instructions.
+ .000
5/16
.234 – .003
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
CLEAR HOLE STANDOFFS
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
Fiber
Board
Thickness
Recommended
Shank Length
for Swage
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
**Supplied in round only.
Prefix letter code to part number.
EXAMPLE: W71010-H-SS-.105-12
ORDER EXAMPLE:
71010 - H - SS - .105 - 12 - HT
Basic
Part
Number
Available ID and Appropriate Code
ID +.010
Code Letter ID +.010
Code Letter
–.000
–.000
.091
Q
.150
WW
.115
U
.156
XX
.120
V
.171
X
.140
W
.194
Y
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
Hi-Torque
Option:
See page
45
.140 - ID
Swage Tooling
Punch
Part Number
P-5
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 71040-R-SS-.105-12 (L=.525)
EXAMPLE:
L Length
Thread
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/8
1-1/4
1-1/2
1-3/4
2
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
Basic
Part Number
71010
71015
71020
71025
71030
71035
71040
71045
71050
71055
71060
71062
71065
71067
71070
71075
71080
71085
71090
71095
H or R or S
NOTE: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
Material
P-5
Anvil Part Number
Round
He x
RA -26
HA-56
RA-27
HA-57
RA-28
HA-58
RA-29
HA-59
PUNCH
Shank Length
HA - 56
Finish
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
HT Option
59
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
SWAGE STANDOFFS - THREADED & CLEAR HOLE
5/16" Hex, Round or Squar e - 4-40 Thd.
Ct. Bore .201 +– .002
.001
4-40
Thread
See page 281 for depth of thread.
See page 45 for installa ion instructions.
+ .000
5/16
.234 – .003
CLEAR HOLE STANDOFFS
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
Fiber
Board
Thickness
Recommended
Shank Length
for Swage
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
**Supplied in round only.
Prefix letter code to part number.
EXAMPLE: Q72010-H-SS-.105-12
ORDER EXAMPLE:
72010 - H - SS - .105 - 12 - HT
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
Hi-Torque
Option:
See page
45
.091 - ID
Swage Tooling
Punch
Part Number
P-5
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 72040-R-SS-.105-12 (L=.525)
EXAMPLE:
60
Available ID and Appropriate Code
ID +.010
Code Letter ID +.010
–.000 Code Letter
–.000
.091
Q
.150
WW
.115
U
.156
XX
.120
V
.171
X
.140
W
.194
Y
L Length
Thread
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/8
1-1/4
1-1/2
1-3/4
2
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
Basic
Part Number
72010
72015
72020
72025
72030
72035
72040
72045
72050
72055
72060
72062
72065
72066
72070
72075
72080
72085
72090
72095
H or R or S
Material
P-5
Anvil Part Number
Round
He x
RA -26
HA-56
RA-27
HA-57
RA-28
HA-58
RA-29
HA-59
PUNCH
Shank Length
HA - 56
Finish
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
HT Option
NOTE: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
1-888-208-2008
SWAGE STANDOFFS - THREADED & CLEAR HOLE
5/16" Hex, Round or Squar e - 8-32 Thd.
Ct. Bore .201 +– .002
.001
8-32
Thread
See page 281 for depth of thread.
See page 45 for installation instructions.
+ .000
5/16
.234 – .003
CLEAR HOLE STANDOFFS
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
Fiber
Board
Thickness
Recommended
Shank Length
for Swage
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
**Supplied in round only.
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
Hi-Torque
Option:
See page
45
.140 - ID
Swage Tooling
Punch
Part Number
P-5
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 81040-R-SS-.105-12 (L=.525)
EXAMPLE:
L Length
Thread
1/8
5/32
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/8
1-1/4
1-1/2
1-3/4
2
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
Basic
Part Number
81010
81012
81015
81020
81025
81030
81035
81040
81045
81050
81055
81060
81062
81065
81067
81070
81075
81080
81085
81090
81095
H or R or S
NOTE: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
Available ID and Appropriate Code
+.010
ID +.010
–.000 Code Letter ID –.000 Code Letter
.091
Q
.150
WW
.115
U
.156
XX
.120
V
.171
X
.140
W
.194
Y
Prefix letter code to part number.
EXAMPLE: W81010-H-SS-.105-12
ORDER EXAMPLE:
81010 - H - SS - .105 - 12 - HT
Basic
Part
Number
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
Material
P-5
Anvil Part Number
Round
He x
RA -26
HA-56
RA-27
HA-57
RA-28
HA-58
RA-29
HA-59
PUNCH
Shank Length
HA - 56
Finish
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
HT Option
61
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
SWAGE STANDOFFS - THREADED & CLEAR HOLE
5/16" Hex, Round or Squar e - 10-32 Thd.
Ct. Bore .201 +– .002
.001
10-32
Thread
See page 281 for depth of thread.
See page 45 for installation instructions.
+ .000
5/16
.234 – .003
CLEAR HOLE STANDOFFS
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
F ber
Board
Thickness
Recommended
Shank Length
for Swage
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
.091
.115
.120
.140
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
Hi-Torque
Option:
See page
45
P-5
EXAMPLE:
62
Thread
1/8
5/32
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
1
1-1/8
1-1/4
1-1/2
1-3/4
2
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
Basic
Part Number
82010
82012
82014
82016
82018
82020
82022
82024
82026
82028
82030
82032
82034
82036
82038
82040
82042
82044
82046
82048
H or R or S
WW
XX
X
Y
Swage Tooling
Punch
Part Number
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 82024-R-SS-.105-12 (L=.525)
L Length
.150
.156
.171
.194
.091 - ID
ORDER EXAMPLE:
82010 - H - SS - .105 - 12 - HT
Hex (H),
Round (R)
or Square (S)
Q
U
V
W
Prefix letter code to part number.
EXAMPLE: Q82010-H-SS-.105-12
**Supplied in round only.
Basic
Part
Number
Available ID and Appropriate Code
+.010
+.010
–.000 Code Letter ID –.000 Code Letter
ID
Material
P-5
Anvil Part Number
Round
He x
RA -26
HA-56
RA-27
HA-57
RA-28
HA-58
RA-29
HA-59
PUNCH
Shank Length
HA - 56
Finish
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
HT Option
NOTE: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
1-888-208-2008
SWAGE STANDOFFS - THREADED & CLEAR HOLE
3/8" Hex, Round or Squar e - 3/48 Thd.
Ct. Bore .201 +– .002
.001
3-48
Thread
See page 281 for depth of thread.
See page 45 for installation instructions.
+ .000
3/8
.234 – .003
CLEAR HOLE STANDOFFS
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
F ber
Board
Thickness
Recommended
Shank Length
for Swage
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
Available ID and Appropriate Code
+.010
ID +.010
–.000 Code Letter ID –.000 Code Letter
.091
Q
.150
WW
.115
U
.156
XX
.120
V
.171
X
.140
W
.194
Y
Prefix letter code to part number.
EXAMPLE: W53010-H-SS-.105-12
**Supplied in round only.
.140 - ID
ORDER EXAMPLE:
53010 - H - SS - .105 - 12 - HT
Basic
Part
Number
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
Hi-Torque
Option:
See page
45
Swage Tooling
Punch
Part Number
P-5
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 53040-R-SS-.105-12 (L=.525)
EXAMPLE:
L Length
Thread
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/8
1-1/4
1-1/2
1-3/4
2
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
3-48
Basic
Part Number
53010
53015
53020
53025
53030
53035
53040
53045
53050
53055
53060
53062
53065
53066
53070
53075
53080
53085
53090
53095
H or R or S
NOTE: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
Material
P-5
Anvil Part Number
Round
He x
RA -30
HA-60
RA-31
HA-61
RA-32
HA-62
RA-33
HA-63
PUNCH
Shank Length
HA - 60
Finish
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
HT Option
63
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
SWAGE STANDOFFS - THREADED & CLEAR HOLE
3/8" Hex, Round or Squar e - 6-32 Thd.
Ct. Bore .201 +– .002
.001
6-32
Thread
See page 281 for depth of thread.
See page 45 for installation instructions.
+ .000
3/8
.234 – .003
CLEAR HOLE STANDOFFS
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Recommended
Shank Length
for Swage
.075
.105
.135
.165
.230
.290
Board
Thickness
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
Fiber
1/32
1/16
3/32
1/8
3/16
1/4
**Supplied in round only.
Available ID and Appropriate Code
+.010
+.010
–.000 Code Letter ID –.000 Code Letter
.091
Q
.150
WW
.115
U
.156
XX
.120
V
.171
X
.140
W
.194
Y
ID
Prefix letter code to part number.
EXAMPLE: Q91010-H-SS-.105-12
.091 - ID
ORDER EXAMPLE:
91010 - H - SS - .105 - 12 - HT
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
Hi-Torque
Option:
See page
45
Swage Tooling
Punch
Part Number
EXAMPLE:
64
L Length
Thread
1/8
3/16
1/4
3/8
5/16
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
1
1-1/8
1-1/4
1-1/2
1-3/4
2
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
Basic
Part Number
91010
91015
91020
91025
91030
91035
91040
91045
91050
91055
91060
91062
91065
91070
91075
91080
91085
91090
91095
H or R or S
RA -30
RA-31
RA-32
RA-33
P-5
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 91040-R-SS-.105-12 (L=.525)
Material
Anvil Part Number
Round
He x
P-5
PUNCH
Shank Length
HA-60
HA-61
HA-62
HA-63
HA - 60
Finish
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
HT Option
NOTE: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
1-888-208-2008
SWAGE STANDOFFS - THREADED & CLEAR HOLE
3/8" Hex, Round or Squar e - 4-40 Thd.
Ct. Bore .201 +– .002
.001
4-40
Thread
See page 281 for depth of thread.
See page 45 for installation instructions.
+ .000
3/8
.234 – .003
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
CLEAR HOLE STANDOFFS
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
Fiber
Board
Thickness
Recommended
Shank Length
for Swage
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
Available ID and Appropriate Code
+.010
ID +.010
–.000 Code Letter ID –.000 Code Letter
.091
Q
.150
WW
.115
U
.156
XX
.120
V
.171
X
.140
W
.194
Y
**Supplied in round only.
Prefix letter code to part number.
EXAMPLE: W93010-H-SS-.105-12
ORDER EXAMPLE:
93010 - H - SS - .105 - 12 - HT
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
Hi-Torque
Option:
See page
45
.140 - ID
Swage Tooling
Punch
Part Number
EXAMPLE:
L Length
Thread
Basic
Part Number
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/8
1-1/4
1-1/2
1-3/4
2
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
93010
93015
93020
93025
93030
93035
93040
93045
93050
93055
93060
93062
93065
93066
93070
93075
93080
93085
93090
93095
H or R or S
NOTE: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
RA -30
RA-31
RA-32
RA-33
P-5
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 93040-R-SS-.105-12 (L=.525)
Material
Anvil Part Number
Round
He x
P-5
PUNCH
Shank Length
HA-60
HA-61
HA-62
HA-63
HA - 60
Finish
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
HT Option
65
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
SWAGE STANDOFFS - THREADED & CLEAR HOLE
3/8" Hex, Round or Squar e - 8-32 Thd.
Ct. Bore .201 +– .002
.001
8-32
Thread
See page 281 for depth of thread.
See page 45 for installation instructions.
+ .000
3/8
.234 – .003
CLEAR HOLE STANDOFFS
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
Fiber
Board
Thickness
Recommended
Shank Length
for Swage
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
**Supplied in round only.
Prefix letter code to part number.
EXAMPLE: Q12010-H-SS-.105-12
ORDER EXAMPLE:
12010 - H - SS - .105 - 12 - HT
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
Hi-Torque
Option:
See page
45
.091 - ID
Swage Tooling
Punch
Part Number
P-5
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 12040-R-SS-.105-12 (L=.525)
EXAMPLE:
66
Available ID and Appropriate Code
+.010
ID +.010
–.000 Code Letter ID –.000 Code Letter
.091
Q
.150
WW
.115
U
.156
XX
.120
V
.171
X
.140
W
.194
Y
L Length
Thread
Basic
Part Number
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
1
1-1/8
1-1/4
1-1/2
1-3/4
2
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
12010
12015
12020
12025
12030
12035
12040
12045
12050
12055
12060
12062
12065
12070
12075
12080
12085
12090
12095
H or R or S
Material
P-5
Anvil Part Number
Round
He x
RA -30
HA-60
RA-31
HA-61
RA-32
HA-62
RA-33
HA-63
PUNCH
Shank Length
HA - 60
Finish
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
HT Option
NOTE: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
1-888-208-2008
SWAGE STANDOFFS - THREADED & CLEAR HOLE
3/8" Hex, Round or Squar e - 10-32 Thd.
Ct. Bore .201 +– .002
.001
10-32
Thread
See page 281 for depth of thread.
See page 45 for installation instruc ions.
+ .000
3/8
.234 – .003
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
CLEAR HOLE STANDOFFS
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
Fiber
Board
Thickness
Recommended
Shank Length
for Swage
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
Prefix letter code to part number.
EXAMPLE: W13010-H-SS-.105-12
**Supplied in round only.
.140 - ID
ORDER EXAMPLE:
13010 - H - SS - .105 - 12 - HT
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
Hi-Torque
Option:
See page
45
Swage Tooling
Punch
Part Number
P-5
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 13040-R-SS-.105-12 (L=.525)
EXAMPLE:
L Length
Thread
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
1
1-1/8
1-1/4
1-1/2
1-3/4
2
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
Basic
Part Number
13010
13015
13020
13025
13030
13035
13040
13045
13050
13055
13060
13062
13065
13070
13075
13080
13085
13090
13095
H or R or S
NOTE: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
Available ID and Appropriate Code
+.010
ID +.010
–.000 Code Letter ID –.000 Code Letter
.091
Q
.150
WW
.115
U
.156
XX
.120
V
.171
X
.140
W
.194
Y
Material
P-5
Anvil Part Number
Round
He x
RA -30
HA-60
RA-31
HA-61
RA-32
HA-62
RA-33
HA-63
PUNCH
Shank Length
HA - 60
Finish
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
HT Option
67
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
SWAGE STANDOFFS - THREADED & CLEAR HOLE
1/2" Hex, Round or Squar e - 6-32 Thd.
Ct. Bore .201 +– .002
.001
6-32
Thread
See page 281 for depth of thread.
See page 45 for installa ion instructions.
+ .000
1/2
.234 – .003
CLEAR HOLE STANDOFFS
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
Fiber
Board
Thickness
Recommended
Shank Length
for Swage
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
Prefix letter code to part number.
EXAMPLE: Q13200-H-SS-.105-12
**Supplied in round only.
.091 - ID
ORDER EXAMPLE:
13200 - H - SS - .105 - 12 - HT
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
Hi-Torque
Option:
See page
45
Swage Tooling
Punch
Part Number
EXAMPLE:
68
Thread
Basic
Part Number
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
1
1-1/8
1-1/4
1-1/2
1-3/4
2
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
13200
13202
13204
13206
13208
13210
13212
13214
13216
13218
13220
13222
13224
13226
13228
13230
13232
13234
13236
H or R or S
Material
Anvil Part Number
Round
He x
RA -34
RA-35
RA-36
RA-37
P-5
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 13212-R-SS-.105-12 (L=.525)
L Length
Available ID and Appropriate Code
+.010
ID +.010
–.000 Code Letter ID –.000 Code Letter
.091
Q
.150
WW
.115
U
.156
XX
.120
V
.171
X
.140
W
.194
Y
P-5
PUNCH
Shank Length
HA-64
HA-65
HA-66
HA-67
RA - 34
Finish
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
HT Option
NOTE: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
1-888-208-2008
SWAGE STANDOFFS - THREADED & CLEAR HOLE
1/2" Hex, Round or Squar e - 8-32 Thd.
Ct. Bore .201 +– .002
.001
8-32
Thread
See page 281 for depth of thread.
See page 45 for installation instructions.
+ .000
1/2
.234 – .003
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
CLEAR HOLE STANDOFFS
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
Fiber
Board
Thickness
Recommended
Shank Length
for Swage
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
Available ID and Appropriate Code
+.010
ID +.010
–.000 Code Letter ID –.000 Code Letter
.091
Q
.150
WW
.115
U
.156
XX
.120
V
.171
X
.140
W
.194
Y
**Supplied in round only.
Prefix letter code to part number.
EXAMPLE: W13238-H-SS-.105-12
ORDER EXAMPLE:
13238 - H - SS - .105 - 12 - HT
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
Hi-Torque
Option:
See page
45
.140 - ID
Swage Tooling
Punch
Part Number
P-5
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 13250-R-SS-.105-12 (L=.525)
EXAMPLE:
L Length
Thread
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
1
1-1/8
1-1/4
1-1/2
1-3/4
2
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
Basic
Part Number
13238
13240
13242
13244
13246
13248
13250
13252
13254
13256
13258
13260
13262
13264
13266
13268
13270
13272
13274
H or R or S
NOTE: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
Material
P-5
Anvil Part Number
Round
He x
RA -34
HA-64
RA-35
HA-65
RA-36
HA-66
RA-37
HA-67
PUNCH
Shank Length
RA - 34
Finish
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
HT Option
69
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
SWAGE STANDOFFS - THREADED & CLEAR HOLE
1/2" Hex, Round or Squar e - 10-32 Thd.
Ct. Bore .201 +– .002
.001
10-32
Thread
See page 281 for depth of thread.
See page 45 for installation instructions.
+ .000
1/2
.234 – .003
CLEAR HOLE STANDOFFS
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
Fiber
Board
Thickness
Recommended
Shank Length
for Swage
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
Available ID and Appropriate Code
+.010
ID +.010
–.000 Code Letter ID –.000 Code Letter
.091
Q
.150
WW
.115
U
.156
XX
.120
V
.171
X
.140
W
.194
Y
**Supplied in round only.
Prefix letter code to part number.
EXAMPLE: W13276-H-SS-.105-12
ORDER EXAMPLE:
13276 - H - SS - .105 - 12 - HT
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
Hi-Torque
Option:
See page
45
.140 - ID
Swage Tooling
Punch
Part Number
EXAMPLE:
70
L Length
Thread
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
1
1-1/8
1-1/4
1-1/2
1-3/4
2
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
Basic
Part Number
13276
13278
13280
13282
13284
13286
13288
13290
13292
13294
13296
13298
13300
13302
13304
13306
13308
13310
13312
H or R or S
RA -34
RA-35
RA-36
RA-37
P-5
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 13288-R-SS-.105-12 (L=.525)
Material
Anvil Part Number
Round
He x
P-5
PUNCH
Shank Length
HA-64
HA-65
HA-66
HA-67
RA - 34
Finish
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
HT Option
NOTE: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
1-888-208-2008
SWAGE STANDOFFS - THREADED & CLEAR HOLE
1/2" Hex, Round or Squar e - 1/4-20 Thd.
Ct. Bore .275 +– .002
.001
1/4-20
Thread
See page 281 for depth of thread.
See page 45 for installation instructions.
+ .000
1/2
.312 – .003
CLEAR HOLE STANDOFFS
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Ph**
Phl**
L**
PA**
PP**
T
F**
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate (Lexan)
A.B.S
P.V.C
Teflon
Fiber
Board
Thickness
Recommended
Shank Length
for Swage
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
.091
.115
.120
.140
.150
Hex (H),
Round (R)
or Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
Hi-Torque
Option:
See page
45
Basic
Part Number
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
1
1-1/8
1-1/4
1-1/2
1-3/4
2
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
13314
13316
13318
13320
13322
13324
13326
13328
13330
13332
13334
13336
13338
13340
13342
13344
13346
13348
13350
H or R or S
NOTE: Where L dimension is 1/2 or longer, see page 281 for depth of thread.
XX
X
Y
Z
ZZ
Swage Tooling
Punch
Part Number
P-8
EXAMPLE:
Thread
.156
.171
.194
.215
.257
.040 - ID
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 13326-R-SS-.105-12 (L=.525)
L Length
Q
U
V
W
WW
Prefix letter code to part number.
EXAMPLE: W13314-H-SS-.105-12
ORDER EXAMPLE:
13314 - H - SS - .105 - 12 - HT
Basic
Part
Number
Available ID and Appropriate Code
+.010
+.010
–.000 Code Letter ID –.000 Code Letter
ID
**Supplied in round only.
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
Material
P-8
Anvil Part Number
Round
He x
RA -34
HA-64
RA-35
HA-65
RA-36
HA-66
RA-37
HA-67
PUNCH
Shank Length
RA - 34
Finish
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
HT Option
71
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
POSITIVE LOCKING SWAGE STANDOFF
Threaded and Clear Hole - 3/16" Round - 2-56 or 4-40 Thd.
± .002
.152 Dia. Typ.
.115 Dia. C’Bore Typ.
.139 Dia. Typ.
+ .003
– .000
+ .000
– .003
CLEAR HOLE STANDOFFS
Available ID and Appropriate Code
ID
Code Letter
.091
.115
See page 281 for depth of thread.
A
B
C
S
SS
.115 - ID
Aluminum
Brass
Copper
Steel
Stainless Steel
Board
Thickness
S - Shank Length
for Swage Type
K
Knurl
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
1/32
1/16
3/32
1/8
5/32
3/16
ORDER EXAMPLE:
67200 - 256 - A - .105 - 1
Basic
Part
Number
Thread
Size
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 67202-4-40-A-.105-1 (L=.200)
Hex material available, add an H to the part number .
EXAMPLE: 67202-H-4-40-A-.105-1
Panel hole size* should be: .140
Q
U
Prefix letter code to part number.
EXAMPLE: U67200-R-SS-.105-12
Available Material (see page 275)
72
+.010
–.000
Basic
Part Number
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/4
1-1/2
1-3/4
2
67200
67202
67204
67206
67208
67210
67212
67214
67216
67218
67220
67222
67224
67226
67228
67230
67232
67234
67236
Thread
2-56 or 4-40
Material
Anvil Part Number
Round
He x
RA -18
RA-19
RA-20
RA-21
P-3
EXAMPLE:
+.005
- 000
Length
Swage Tooling
Punch
Part Number
P-3
PUNCH
HA-48
HA-49
HA-50
HA-51
HA - 48
Shank Length
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
Finish
NOTE: Where L dimension is 3/4 or longer, see page 281 for depth of thread.
*See page 45 for installation instructions.
1-888-208-2008
POSITIVE LOCKING SWAGE STANDOFF
Threaded and Clear Hole - 7/32" Round - 2-56 or 4-40 Thd.
CLEAR HOLE STANDOFFS
± .002
.179 Dia. Typ.
.129 Dia. C’Bore Typ.
.165 Dia. Typ.
+ .002
– .001
+ .000
– .003
Available ID and Appropriate Code
+.010
ID +.010
–.000 Code Letter ID –.000 Code Letter
.091
Q
.120
V
.115
U
.140
W
Prefix letter code to part number.
EXAMPLE: W67250-R-SS-.105-12
See page 281 for depth of thread.
Available Material (see page 275)
A
B
C
S
SS
STAKING TOOLS
ARE NOT AVAILABLE
FOR THIS PART
NUMBER
Aluminum
Brass
Copper
Steel
Stainless Steel
ORDER EXAMPLE:
67250 - 256 - A - .105 - 1
Basic
Part
Number
Thread
Size
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
S - Shank Length
for Swage Type
K
Knurl
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
1/32
1/16
3/32
1/8
5/32
3/16
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 67252 -4-40 A .105 - 1 (L=.200)
Panel hole size* should be: .166
Length
Basic
Part Number
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/4
1-1/2
1-3/4
2
67250
67252
67254
67256
67258
67260
67262
67264
67266
67268
67270
67272
67274
67276
67278
67280
67282
67284
67286
+.005
-.000
Thread
2-56 or 4-40
NOTE: Where L dimension is 3/4 or longer, see page 281 for depth of thread.
*See page 45 for installation instructions.
.140 - ID
Board
Thickness
!
Material
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
TECH TIP
Download 3D CAD models of this
and other parts in a wide range
of standard formats at
www.accuratescrew.com.
Shank Length
Finish
73
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
POSITIVE LOCKING SWAGE STANDOFF
Threaded and Clear Hole - 1/4" Round - 4-40 or 6-32 Thd.
± .002
.201 Dia. Typ.
.150 Dia. C’Bore Typ.
.188 Dia. Typ.
+ .003
– .000
+ .000
– .003
CLEAR HOLE STANDOFFS
Available ID and Appropriate Code
+.010
ID +.010
–.000 Code Letter ID –.000 Code Letter
.091
Q
.140
W
.115
U
.150
WW
.120
V
.156
XX
See page 281 for depth of thread.
Available Material (see page 275)
A
B
C
S
SS
.140 - ID
Aluminum
Brass
Copper
Steel
Stainless Steel
Board
Thickness
S - Shank Length
for Swage Type
K
Knurl
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
1/32
1/16
3/32
1/8
5/32
3/16
ORDER EXAMPLE:
67300 - 440 - A - .105 - 1
Basic
Part
Number
Thread
Size
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 67302-440-A-.105-1 (L=.200)
Hex material is available, add an H to the part number .
EXAMPLE: 67300-H-6-32-A-.105-1
Panel hole size* should be: .188
Length
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/4
1-1/2
1-3/4
2
74
Basic
Part Number
Prefix letter code to part number.
EXAMPLE: W67300-R-SS-.105-12
Swage Tooling
Punch
Part Number
P-4
EXAMPLE:
+.005
-.000
Thread
4-40 or 6-32
Material
P-4
Anvil Part Number
Round
He x
RA -22
HA-52
RA-23
HA-53
RA-24
HA-54
RA-25
HA-55
PUNCH
HA - 52
Shank Length
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
Finish
67300
67302
67304
67306
67308
67310
67312
67314
67316
67318
67320
67322
67324
67326
67328
67330
67332
67334
67336
NOTE: Where L dimension is 3/4 or longer, see page 281 for depth of thread.
*See page 45 for installation instructions.
1-888-208-2008
POSITIVE LOCKING SWAGE STANDOFF
Threaded and Clear Hole - 9/32" Round - 4-40 or 6-32 Thd.
± .002
.226 Dia. Typ.
.176 Dia. C’Bore Typ.
.212 Dia. Typ.
+ .002
– .001
+ .000
– .003
CLEAR HOLE STANDOFFS
See page 281 for depth of thread.
Available Material (see page 275)
A
B
C
S
SS
Board
Thickness
S - Shank Length
for Swage Type
K
Knurl
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
1/32
1/16
3/32
1/8
5/32
3/16
ORDER EXAMPLE:
67350 - 440 - A - .105 - 1
Thread
Size
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
STAKING TOOLS
ARE NOT AVAILABLE
FOR THIS PART NUMBER
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 67352-440-A-.105-1 (L=.200)
Panel hole size* should be: .213
Length
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/4
1-1/2
1-3/4
2
Basic
Part Number
Prefix letter code to part number.
EXAMPLE: W67350-R-SS-.105-12
.140 - ID
Aluminum
Brass
Copper
Steel
Stainless Steel
Basic
Part
Number
Available ID and Appropriate Code
+.010
ID +.010
–.000 Code Letter ID –.000 Code Letter
.091
Q
.150
WW
.115
U
.156
XX
.120
V
.171
X
.140
W
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
+.005
-.000
Thread
4-40 or 6-32
Material
Shank Length
Finish
67350
67352
67354
67356
67358
67360
67362
67364
67366
67368
67370
67372
67374
67376
67378
67380
67382
67384
67386
NOTE: Where L dimension is 3/4 or longer, see page 281 for depth of thread.
*See page 45 for installation instructions.
75
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
POSITIVE LOCKING SWAGE STANDOFF
Threaded and Clear Hole - 5/16" Round - 6-32, 8-32 or 10-32 Thd.
CLEAR HOLE STANDOFFS
± .002
.247 Dia. Typ.
.200 Dia. C’Bore Typ.
.234 Dia. Typ.
+ .003
– .000
+ .000
– .003
Available ID and Appropriate Code
+.010
ID +.010
–.000 Code Letter ID –.000 Code Letter
.091
Q
.150
WW
.115
U
.156
XX
.120
V
.171
X
.140
W
.194
Y
See page 281 for depth of hread.
Available Material (see page 275)
A
B
C
S
SS
.140 - ID
Aluminum
Brass
Copper
Steel
Stainless Steel
Board
Thickness
S - Shank Length
for Swage Type
K
Knurl
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
1/32
1/16
3/32
1/8
5/32
3/16
ORDER EXAMPLE:
67400 - 632 - A - .105 - 1
Basic
Part
Number
Thread
Size
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 67400-632-A-.105-1 (L=.200)
Hex material is available, add an H to the part number .
EXAMPLE: 67400-H-632-A-.105-1
Panel hole size* should be: .234
Length
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/4
1-1/2
1-3/4
2
76
Prefix letter code to part number.
EXAMPLE: W67400-R-SS-.105-12
Thread
6-32, 8-32 or 10-32
Material
Anvil Part Number
Round
He x
RA -26
RA-27
RA-28
RA-29
P-5
EXAMPLE:
+.005
-.000
Basic
Part Number
67400
67402
67404
67406
67408
67410
67412
67414
67416
67418
67420
67422
67424
67426
67428
67430
67432
67434
67436
Swage Tooling
Punch
Part Number
P-5
PUNCH
HA-56
HA-57
HA-58
HA-59
HA - 56
Shank Length
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
Finish
NOTE: Where L dimension is 3/4 or longer, see page 281 for depth of thread.
*See page 45 for installation instruc ions.
1-888-208-2008
POSITIVE LOCKING SWAGE STANDOFF
Threaded and Clear Hole - 11/32" Round - 6-32, 8-32 or 10-32 Thd.
± .002
.263 Dia. Typ.
.213 Dia. C’Bore Typ.
.250 Dia. Typ.
± .002
+ .000
– .004
CLEAR HOLE STANDOFFS
Available ID and Appropriate Code
+.010
ID +.010
–.000 Code Letter ID –.000 Code Letter
.091
Q
.150
WW
.115
U
.156
XX
.120
V
.171
X
.140
W
See page 281 for depth of thread.
Prefix letter code to part number.
EXAMPLE: W67450-R-SS-.105-12
Available Material (see page 275)
A
B
C
S
SS
.140 - ID
Aluminum
Brass
Copper
Steel
Stainless Steel
Board
Thickness
S - Shank Length
for Swage Type
K
Knurl
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
1/32
1/16
3/32
1/8
5/32
3/16
ORDER EXAMPLE:
67450 - 632 - A - .105 - 1
Basic
Part
Number
Thread
Size
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
STAKING TOOLS
ARE NOT AVAILABLE
FOR THIS PART NUMBER
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 67452-632-A-.105-1 (L=.200)
Panel hole size* should be: .250
Length
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/4
1-1/2
1-3/4
2
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
Basic
Part Number
67450
67452
67454
67456
67458
67460
67462
67464
67466
67468
67470
67472
67474
67476
67478
67480
67482
67484
67486
+.005
-.000
Thread
6-32, 8-32 or 10-32
NOTE: Where L dimension is 3/4 or longer, see page 281 for depth of thread.
*See page 45 for installation instructions.
Material
Shank Length
Finish
77
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
POSITIVE LOCKING SWAGE STANDOFF
Threaded and Clear Hole - 3/8" Round - 6-32 or 8-32 or 10-32 Thd.
± .002
.247 Dia. Typ.
.200 Dia. C’Bore Typ.
.234 Dia. Typ.
+ .003
– .000
+ .000
– .003
CLEAR HOLE STANDOFFS
See page 281 for depth of thread.
Prefix letter code to part number.
EXAMPLE: W67500-R-SS-.105-12
Available Material (see page 275)
A
B
C
S
SS
.140 - ID
Aluminum
Brass
Copper
Steel
Stainless Steel
Board
Thickness
S - Shank Length
for Swage Type
K
Knurl
1/32
1/16
3/32
1/8
3/16
1/4
.075
.105
.135
.165
.230
.290
1/32
1/16
3/32
1/8
5/32
3/16
ORDER EXAMPLE:
67500 - 632 - A - .105 - 1
Basic
Part
Number
Thread
Size
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 67502-632-A-.105-1 (L=.200)
Hex Material available,add an H to the part number .
EXAMPLE: 67500-H-632-A-.105-1
Panel hole size* should be: .234
Length
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/4
1-1/2
1-3/4
2
78
Basic
Part Number
67500
67502
67504
67506
67508
67510
67512
67514
67516
67518
67520
67522
67524
67526
67528
67530
67532
67534
67536
Available ID and Appropriate Code
+.010
ID +.010
–.000 Code Letter ID –.000 Code Letter
.091
Q
.150
WW
.115
U
.156
XX
.120
V
.171
X
.140
W
.194
Y
Swage Tooling
Punch
Part Number
Thread
6-32, 8-32 or 10-32
RA -30
RA-31
RA-32
RA-33
P-5
EXAMPLE:
+.005
-.000
Material
Anvil Part Number
Round
He x
P-5
PUNCH
HA-60
HA-61
HA-62
HA-63
HA - 60
Shank Length
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
Finish
NOTE: Where L dimension is 3/4 or longer, see page 281 for depth of thread.
*See page 45 for installation instructions.
1-888-208-2008
KNURLED STANDOFFS
Threaded and Clear Hole - 3/16" Hex, Round or Squar e - 2-56 Thd.
2-56
Thread
.003
C’Bore .115 Typ. +
– .000
.152 ± .002
3/16
CLEAR HOLE STANDOFFS
Available Material
(see page 275)
A
B
C
S
SS
Board
Thickness
1/32
1/16
3/32
1/8
3/16
1/4
Aluminum
Brass
Copper
Steel
Stainless Steel
Recommended
Shank Length
for Swage
.075
.105
.135
.165
.230
.290
Available ID and Appropriate Code
ID +.010
Code Letter
–.000
.070
.091
.115
Hex (H),
Round (R) or
Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 901014-R-SS-.105-12 (L=.525)
Panel hole size** should be: .140
Length
Thread
Basic
Part Number
1/8
5/32
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-3/16
1-1/4
1-3/8
1-1/2
1-3/4
2
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
901000
901002
901004
901006
901008
901010
901012
901014
901016
901018
901020
901022
901024
901026
901028
901030
901032
901034
901036
901038
901040
901042
.070 - ID
Swage Tooling
Punch
Part Number
P-3
EXAMPLE:
+.005
-.000
H or R or S
NOTE: Where L dimension is 3/4 or longer, see page 281 for depth of thread.
**See page 45 for installation instructions.
P
Q
U
Prefix letter code to part number.
EXAMPLE: P901000-R-SS-.105-12
ORDER EXAMPLE:
901000 - H - SS - .105 - 1
Basic
Part
Number
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
P-3
Material
Anvil Part Number
Round
He x
RA -18
HA-48
RA-19
HA-49
RA-20
HA-50
RA-21
HA-51
PUNCH
HA - 48
Shank Length
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
Finish
79
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
KNURLED STANDOFFS
Threaded and Clear Hole - 3/16" Hex, Round or Squar e - 4-40 Thd.
4-40
Thread
.003
C’Bore .115 Typ. +
– .000
.152 ± .002
3/16
CLEAR HOLE STANDOFFS
Available Material
(see page 275)
A
B
C
S
SS
Board
Thickness
1/32
1/16
3/32
1/8
3/16
1/4
Aluminum
Brass
Copper
Steel
Stainless Steel
Recommended
Shank Length
for Swage
.075
.105
.135
.165
.230
.290
Available ID and Appropriate Code
ID +.010
Code Letter
–.000
.070
.091
.115
Prefix letter code to part number.
EXAMPLE: P901084-R-SS-.105-12
ORDER EXAMPLE:
901084 - H - SS - .105 - 1
Basic
Part
Number
Hex (H),
Round (R) or
Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
.070 - ID
Swage Tooling
Punch
Part Number
Finish:
See page
277
P-3
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 901098-R-SS-.105-12 (L=.525)
Panel hole size** should be: .140
80
Length
Thread
3/32
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
1
1-3/16
1-1/4
1-3/8
1-1/2
1-3/4
2
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
EXAMPLE:
+.005
-.000
Basic
Part Number
901084
901086
901088
901090
901092
901094
901096
901098
901100
901102
901104
901106
901108
901110
901112
901114
901116
901118
901120
901122
901124
P
Q
U
H or R or S
P-3
Material
Anvil Part Number
Round
He x
RA -18
HA-48
RA-19
HA-49
RA-20
HA-50
RA-21
HA-51
PUNCH
HA - 48
Shank Length
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
Finish
NOTE: Where L dimension is 3/4 or longer, see page 281 for depth of thread.
**See page 45 for installation instructions.
1-888-208-2008
KNURLED STANDOFFS
Threaded and Clear Hole - 1/4" Hex, Round or Squar e - 4-40 Thd.
4-40
Thread
.003
C’Bore .150 Typ. +
– .001
.201 ± .002
1/4
CLEAR HOLE STANDOFFS
Available Material
(see page 275)
A
B
C
S
SS
Board
Thickness
1/32
1/16
3/32
1/8
3/16
1/4
Aluminum
Brass
Copper
Steel
Stainless Steel
Recommended
Shank Length
for Swage
.075
.105
.135
.165
.230
.290
ID
Hex (H),
Round (R) or
Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 901056-R-SS-.105-12 (L=.525)
Panel hole size** should be: .188
Length
Thread
Basic
Part Number
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/8
1-1/4
1-1/2
1-3/4
2
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
901044
901046
901048
901050
901052
901054
901056
901058
901060
901062
901064
901066
901068
901070
901072
901074
901076
901078
901080
901082
H or R or S
NOTE: Where L dimension is 3/4 or longer, see page 281 for depth of thread.
**See page 45 for installation instructions.
P
Q
U
V
.140
.150
.156
W
WW
XX
Prefix letter code to part number.
EXAMPLE: P901044-R-SS-.105-12
.070 - ID
Swage Tooling
Punch
Part Number
P-4
EXAMPLE:
+ 005
-.000
Available ID and Appropriate Code
+.010
+.010
–.000 Code Letter ID –.000 Code Letter
.070
.091
.115
.120
ORDER EXAMPLE:
901044 - H - SS - .105 - 1
Basic
Part
Number
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
P-4
Material
Anvil Part Number
Round
He x
RA -22
HA-52
RA-23
HA-53
RA-24
HA-54
RA-25
HA-55
PUNCH
HA - 52
Shank Length
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
Finish
81
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
KNURLED STANDOFFS
Threaded and Clear Hole - 1/4" Hex, Round or Squar e - 6-32 Thd.
6-32
Thread
.003
C’Bore .150 Typ. +
– .001
.201 ± .002
1/4
CLEAR HOLE STANDOFFS
Available Material
(see page 275)
A
B
C
S
SS
Board
Thickness
1/32
1/16
3/32
1/8
3/16
1/4
Aluminum
Brass
Copper
Steel
Stainless Steel
Recommended
Shank Length
for Swage
.075
.105
.135
.165
.230
.290
Available ID and Appropriate Code
+.010
ID +.010
–.000 Code Letter ID –.000 Code Letter
.091
Q
.140
W
.115
U
.150
WW
.120
V
.156
XX
Prefix letter code to part number.
EXAMPLE: W901126-R-SS-.105-12
ORDER EXAMPLE:
901126 - H - SS - .105 - 1
Basic
Part
Number
Hex (H),
Round (R) or
Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
.140 - ID
Swage Tooling
Punch
Part Number
Finish:
See page
277
P-4
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 901144-R-SS-.105-12 (L=.525)
Panel hole size** should be: .188
82
+.005
-.000
Length
Thread
Basic
Part Number
1/8
3/16
7/32
1/4
9/32
5/16
11/32
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
901126
901128
901130
901132
901134
901136
901138
901140
901142
901144
901146
901148
901150
901152
901154
901156
901158
901160
901162
901164
901166
901168
901170
901172
EXAMPLE:
H or R or S
P-4
Material
Anvil Part Number
Round
He x
RA -22
HA-52
RA-23
HA-53
RA-24
HA-54
RA-25
HA-55
PUNCH
HA - 52
Shank Length
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
Finish
NOTE: Where L dimension is 3/4 or longer, see page 281 for depth of thread.
**See page 45 for installation instructions.
1-888-208-2008
KNURLED STANDOFFS
Threaded and Clear Hole - 5/16" Hex, Round or Squar e - 6-32 Thd.
6-32
Thread
.003
C’Bore .200 Typ. +
– .000
.247 ± .002
5/16
CLEAR HOLE STANDOFFS
Available Material
(see page 275)
A
B
C
S
SS
Board
Thickness
1/32
1/16
3/32
1/8
3/16
1/4
Aluminum
Brass
Copper
Steel
Stainless Steel
Recommended
Shank Length
for Swage
.075
.105
.135
.165
.230
.290
Available ID and Appropriate Code
+.010
ID +.010
–.000 Code Letter ID –.000 Code Letter
.091
Q
.150
WW
.115
U
.156
XX
.120
V
.171
X
.140
W
.194
Y
Prefix letter code to part number.
EXAMPLE: W901174-R-SS-.105-12
.140 - ID
ORDER EXAMPLE:
901174 - H - SS - .105 - 1
Basic
Part
Number
Hex (H),
Round (R) or
Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 901186-R-SS-.105-12 (L=.525)
Panel hole size** should be: .234
Length
Thread
Basic
Part Number
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
1
1-1/8
1-1/4
1-1/2
1-3/4
2
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
901174
901176
901178
901180
901182
901184
901186
901188
901190
901192
901194
901196
901198
901200
901202
901204
901206
901208
901210
Swage Tooling
Punch
Part Number
P-5
EXAMPLE:
+.005
-.000
H or R or S
NOTE: Where L dimension is 3/4 or longer, see page 281 for depth of thread.
**See page 45 for installation instructions.
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
P-5
Material
Anvil Part Number
Round
He x
RA -26
HA-56
RA-27
HA-57
RA-28
HA-58
RA-29
HA-59
PUNCH
HA - 56
Shank Length
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
Finish
83
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
KNURLED STANDOFFS
Threaded and Clear Hole - 5/16" Hex, Round or Squar e - 8-32 Thd.
8-32
Thread
.003
C’Bore .200 Typ. +
– .000
.247 ± .002
5/16
CLEAR HOLE STANDOFFS
Available Material
(see page 275)
A
B
C
S
SS
Board
Thickness
1/32
1/16
3/32
1/8
3/16
1/4
Aluminum
Brass
Copper
Steel
Stainless Steel
Recommended
Shank Length
for Swage
.075
.105
.135
.165
.230
.290
Available ID and Appropriate Code
+.010
ID +.010
–.000 Code Letter ID –.000 Code Letter
.091
Q
.150
WW
.115
U
.156
XX
.120
V
.171
X
.140
W
.194
Y
Prefix letter code to part number.
EXAMPLE: W901212-R-SS-.105-12
ORDER EXAMPLE:
901212 - H - SS - .105 - 1
Basic
Part
Number
Hex (H),
Round (R) or
Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
.140 - ID
Swage Tooling
Punch
Part Number
Finish:
See page
277
P-5
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 901212-R-SS-.105-12 (L=.525)
Panel hole size** should be: .234
84
EXAMPLE:
+.005
-.000
Length
Thread
Basic
Part Number
1/8
5/32
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
1
1-1/8
1-1/4
1-1/2
1-3/4
2
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
901212
901214
901216
901218
901220
901222
901224
901226
901228
901230
901232
901234
901236
901238
901240
901242
901244
901246
901248
901250
H or R or S
P-5
Material
Anvil Part Number
Round
He x
RA -26
HA-56
RA-27
HA-57
RA-28
HA-58
RA-29
HA-59
PUNCH
HA - 56
Shank Length
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
Finish
NOTE: Where L dimension is 3/4 or longer, see page 281 for depth of thread.
**See page 45 for installation instructions.
1-888-208-2008
KNURLED STANDOFFS
Threaded and Clear Hole - 5/16" Hex, Round or Squar e - 10-32 Thd.
10-32
Thread
.003
C’Bore .200 Typ. +
– .000
.247 ± .002
5/16
CLEAR HOLE STANDOFFS
Available Material
(see page 275)
A
B
C
S
SS
Board
Thickness
1/32
1/16
3/32
1/8
3/16
1/4
Aluminum
Brass
Copper
Steel
Stainless Steel
Recommended
Shank Length
for Swage
.075
.105
.135
.165
.230
.290
Available ID and Appropriate Code
+.010
ID +.010
–.000 Code Letter ID –.000 Code Letter
.091
Q
.150
WW
.115
U
.156
XX
.120
V
.171
X
.140
W
.194
Y
Prefix letter code to part number.
EXAMPLE: W901252-R-SS-.105-12
ORDER EXAMPLE:
901252 - H - SS - .105 - 1
Basic
Part
Number
Hex (H),
Round (R) or
Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 901266-R-SS-.105-12 (L=.525)
Panel hole size** should be: .234
Length
Thread
Basic
Part Number
1/8
5/32
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
1
1-1/8
1-1/4
1-1/2
1-3/4
2
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
901252
901254
901256
901258
901260
901262
901264
901266
901268
901270
901272
901274
901276
901278
901280
901282
901284
901286
901288
901290
.140 - ID
Swage Tooling
Punch
Part Number
P-5
EXAMPLE:
+.005
-.000
H or R or S
NOTE: Where L dimension is 3/4 or longer, see page 281 for depth of thread.
**See page 45 for installation instructions.
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
P-5
Material
Anvil Part Number
Round
He x
RA -26
HA-56
RA-27
HA-57
RA-28
HA-58
RA-29
HA-59
PUNCH
HA - 56
Shank Length
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
Finish
85
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
KNURLED STANDOFFS
Threaded and Clear Hole - 3/8" Hex, Round or Squar e - 6-32 Thd.
6-32
Thread
.003
C’Bore .200 Typ. +
– .000
.247 ± .002
3/8
CLEAR HOLE STANDOFFS
Available Material
(see page 275)
A
B
C
S
SS
Board
Thickness
1/32
1/16
3/32
1/8
3/16
1/4
Aluminum
Brass
Copper
Steel
Stainless Steel
Recommended
Shank Length
for Swage
.075
.105
.135
.165
.230
.290
Available ID and Appropriate Code
+.010
ID +.010
–.000 Code Letter ID –.000 Code Letter
.091
Q
.150
WW
.115
U
.156
XX
.120
V
.171
X
.140
W
.194
Y
Prefix letter code to part number.
EXAMPLE: W901292-R-SS-.105-12
.140 - ID
ORDER EXAMPLE:
901292 - H - SS - .105 - 1
Basic
Part
Number
Hex (H),
Round (R) or
Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Swage Tooling
Punch
Part Number
Finish:
See page
277
P-5
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 901304-R-SS-.105-12 (L=.525)
Panel hole size** should be: .234
86
EXAMPLE:
+.005
-.000
Length
Thread
Basic
Part Number
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
1
1-1/8
1-1/4
1-1/2
1-3/4
2
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
901292
901294
901296
901300
901298
901302
901304
901306
901308
901310
901312
901314
901316
901318
901320
901322
901324
901326
901328
H or R or S
P-5
Material
Anvil Part Number
Round
He x
RA -30
HA-60
RA-31
HA-61
RA-32
HA-62
RA-33
HA-63
PUNCH
HA - 60
Shank Length
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
Finish
NOTE: Where L dimension is 3/4 or longer, see page 281 for depth of thread.
**See page 45 for installation instructions.
1-888-208-2008
KNURLED STANDOFFS
Threaded and Clear Hole - 3/8" Hex, Round or Squar e - 8-32 Thd.
8-32
Thread
.003
C’Bore .200 Typ. +
– .000
.247 ± .002
3/8
CLEAR HOLE STANDOFFS
Available Material
(see page 275)
A
B
C
S
SS
Board
Thickness
1/32
1/16
3/32
1/8
3/16
1/4
Aluminum
Brass
Copper
Steel
Stainless Steel
Recommended
Shank Length
for Swage
.075
.105
.135
.165
.230
.290
Available ID and Appropriate Code
+.010
ID +.010
–.000 Code Letter ID –.000 Code Letter
.091
Q
.150
WW
.115
U
.156
XX
.120
V
.171
X
.140
W
.194
Y
Prefix letter code to part number.
EXAMPLE: W901330-R-SS-.105-12
ORDER EXAMPLE:
901330 - H - SS - .105 - 1
Basic
Part
Number
Hex (H),
Round (R) or
Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
Finish:
See page
277
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 901342-R-SS-.105-12 (L=.525)
Panel hole size** should be: .234
Length
Thread
Basic
Part Number
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
1
1-1/8
1-1/4
1-1/2
1-3/4
2
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
901330
901332
901334
901336
901338
901340
901342
901344
901346
901348
901350
901352
901354
901356
901358
901360
901362
901364
901366
.140 - ID
Swage Tooling
Punch
Part Number
P-5
EXAMPLE:
+.005
-.000
H or R or S
NOTE: Where L dimension is 3/4 or longer, see page 281 for depth of thread.
**See page 45 for installation instructions.
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
P-5
Material
Anvil Part Number
Round
He x
RA -30
HA-60
RA-31
HA-61
RA-32
HA-62
RA-33
HA-63
PUNCH
HA - 60
Shank Length
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
Finish
87
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
KNURLED STANDOFFS
Threaded and Clear Hole - 3/8" Hex, Round or Squar e - 10-32 Thd.
10-32
Thread
.003
C’Bore .200 Typ. +
– .000
.247 ± .002
3/8
CLEAR HOLE STANDOFFS
Available Material
(see page 275)
A
B
C
S
SS
Board
Thickness
1/32
1/16
3/32
1/8
3/16
1/4
Aluminum
Brass
Copper
Steel
Stainless Steel
Recommended
Shank Length
for Swage
.075
.105
.135
.165
.230
.290
Available ID and Appropriate Code
+.010
ID +.010
–.000 Code Letter ID –.000 Code Letter
.091
Q
.150
WW
.115
U
.156
XX
.120
V
.171
X
.140
W
.194
Y
Prefix letter code to part number.
EXAMPLE: W901368-R-SS-.105-12
ORDER EXAMPLE:
901368 - H - SS - .105 - 1
Basic
Part
Number
Hex (H),
Round (R) or
Square (S)
Material:
See chart
Shank Length:
See chart or
fill in your
own length
.140 - ID
Swage Tooling
Finish:
See page
277
Punch
Part Number
*L dimension may be changed, add required length to the closest part number .
EXAMPLE: 901380-R-SS-.105-12 (L=.525)
Panel hole size** should be: .234
88
Length
Thread
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
1
1-1/8
1-1/4
1-1/2
1-3/4
2 10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
P-5
+.005
-.000
Basic
Part Number
EXAMPLE:
H or R or S
P-5
Material
Anvil Part Number
Round
He x
RA -30
HA-60
RA-31
HA-61
RA-32
HA-62
RA-33
HA-63
PUNCH
HA - 60
Shank Length
Length
1/8-3/16
1/4-7/16
1/2-11/16
3/4 & up
ANVIL
Finish
901368
901370
901372
901374
901376
901378
901380
901382
901384
901386
901388
901390
901392
901394
901396
901398
901400
901402
901404
NOTE: Where L dimension is 3/4 or longer, see page 281 for depth of thread.
**See page 45 for installation instructions.
1-888-208-2008
BLIND THREADED HOLE STANDOFFS
Thread
0-80
2-56
3-48
4-40
6-32
8-32
10-32
1/4-20
Depth of Blind Hole
.187 Min. Full
.187 Min. Full
.187 Min. Full
.250 Min. Full
.375 Min. Full
.437 Min. Full
.500 Min. Full
.500 Min. Full
Thread
Thread
Thread
Thread
Thread
Thread
Thread
Thread
Code
A
B
C
H
I
S
K
L
ORDER EXAMPLE:
H - 13010 - H - A - .075 - 1 - HT
Blind Hole Depth:
See chart
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Material:
See chart on
Standoff page
Shank Length:
See chart or
fill in your own
length
Finish:
See page
277
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
Hi-Torque
Option
Refer to Threaded Standoffs on page 46-88 for basic configuration, specifications, material, etc.
Add letter designation to part number according to the charts.
Thread
0-80
2-56
3-48
4-40
6-32
8-32
10-32
1/4-20
Depth of Blind Hole
.187 Min. Full
.187 Min. Full
.187 Min. Full
.250 Min. Full
.375 Min. Full
.437 Min. Full
.500 Min. Full
.500 Min. Full
Thread
Thread
Thread
Thread
Thread
Thread
Thread
Thread
Code
AA
BB
CC
HH
II
SS
KK
LL
ORDER EXAMPLE:
HH - 13010 - H - A - .075 - 1 - HT
Blind Hole Depth:
See chart
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Material:
See chart on
Standoff page
Shank Length:
See chart or
fill in your own
length
Finish:
See page
277
Hi-Torque
Option
Refer to Threaded Standoffs on pages 46-88 for basic configuration, specifications, material, etc.
Add letter designation to part number according to the charts.
!
TECH TIP
For flush flaring into counter-sink hole, use a shank
length of .020 shorter than boar d thickness.
NOTES: Depth of thread will vary in shorter lengths L. The maximum depth, minimum of 1-1/2 threads for shear length, will be threaded .
89
1-888-208-2008
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
STANDOFFS & SPACERS
FACE KNURLED THREADED STANDOFFS
ORDER EXAMPLE:
J - 13010 - H - A - .075 - 1
Knurled
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Material:
See chart on
Standoff page
Shank Length:
See chart or
fill in your own
length
Finish:
See page
277
Refer to Threaded/Clear Hole Standoffs on pages 46-71 for basic part number , basic
configurations, specifications, material, etc.
Add letter designation J to part number for Knurled.
FACE KNURLED CLEAR HOLE STANDOFFS
ORDER EXAMPLE:
J - Q - 13010 - H - A - .075 - 1
Knurled
Clearance
Hole:
See chart
Basic
Part
Number
Hex (H),
Round (R)
or Square (S)
Material:
See chart on
Standoff page
Shank Length:
See chart or
fill in your own
length
Finish:
See page
277
Refer to Threaded/Clear Hole Standoffs on pages 46-71 for basic part number , basic configurations,
specifica ions, material, etc.
Add letter designation J to part number for Knurled.
Add letter designation to part number for Clearance Hole according to the chart.
Visit us on the Web at
www.accuratescrew.com
90
Clearance
Hole
Letter
Designation
.091
.098
.115
.120
.140
.150
.156
.171
.194
.215
.257
Q
QQ
U
V
W
WW
XX
X
Y
Z
ZZ
1-888-208-2008
HINGED STANDOFF FOR TERMINAL BOARDS
Finish
Cadmium plate per
QQ-P-416 class 2,
type 2 and gold iridite
ORDER EXAMPLE:
20088
Material
Made of brass
mil. spec. QQ-B-626A
comp. 22-1/2 hard
Basic
Part
Number
Part
Number
T
Thread
L
Length
20074
20076
20078
20080
20082
20084
4-40
4-40
6-32
6-32
8-32
8-32
.625
.875
.625
.875
.625
.875
D
Diameter
.187
.187
.250
.250
.250
.250
Part
Number
20088
20090
20092
T
Thread
4-40
6-32
8-32
L
Length
1/2
1/2
1/2
D
Diameter
.187
.250
.250
A
B
.250
.312
.312
.250
.250
.250
Part
Number
T
Thread
D
Diameter
L
Length
A
B
C
20094
20095
20095A
20096
20097
20097A
20098
20099
20099A
4-40
4-40
4-40
6-32
6-32
6-32
8-32
8-32
8-32
.187
.187
.187
.250
.250
.250
.250
.250
.250
3/4
1
1-1/4
3/4
1
1-1/4
3/4
1
1-1/4
.172
.250
.250
.172
.250
.250
.172
.250
.250
.375
.375
.625
.375
.375
.625
.375
.375
.625
.375
.625
.625
.375
.625
.625
.375
.625
.625
E
A
C
B
.250
.250
.312
.312
.312
.312
.172
.250
.172
.250
.172
.250
.250
.250
.250
.250
.250
.250
.375
.625
.375
.625
.375
.625
STANDOFFS & SPACERS
STANDOFFS & SPACERS
Fax (973) 244-9177
www.accuratescrew.com
91
1-888-208-2008
LOCKING FASTENERS
Fax (973) 244-9177
www.accuratescrew.com
HI-TORQUE LOCKING FASTENERS
Applications and Installations
Hi-Torque Fasteners Offer A Number
Of Advantages In A Wide Variety Of Styles
LOCKING FASTENERS
assemblies. Their extreme durability makes them a must
where repeated fastening and unfastening takes place.
The unified design of the Floating Nuts simplifies adjusting
hole misalignments, particularly in difficult-to-reach places.
Self-locking styles provide added resistance to vibration
and shock in fastening applications.
• Wear and corrosion resistant
• Magnetic carbon and stainless steel for strong
threads and maximum life
• Simplified design
• No loose nuts, washers or lock pins
• Easy to install with ordinary tools
Installation
Hi-Torque Locking Fastener
Applications Are Virtually Unlimited
Their integral, captivated design speeds handling and
assembly operations in a wide variety of applications in
the electronic, instrument, aircraft and other industries.
The ability of these fasteners to provide long-wearing
stainless steel threads for aluminum, brass, mild steel,
thermoplastic panels or chassis makes them ideal for
fastening components, terminal boards, wire and cable
harnesses, circuit boards, tube sockets and sub-
STANDOFFS
• No special tools or chassis preparations required
• Drilled or punched hole
• Insert into the prescribed size hole
• Press into place
DRILL
AND
PRESS
NUTS
Miniature . . . . . . . .93
Flush Style I ............99
Blind Press ...........106
Knurled . . . . . .94-95
Flush Style II .........100
Flush ....................107
Flush . . . . . . . . . . .96
Hex Extension .......101
Concealed Head....108
Reverse Flush . . . .97
Round Extension ...101
Blind . . . . . . . . . . .98
Blind .............102-103
Spline Press..........104
Spline Press
Extension..............105
92
STUDS
1-888-208-2008
LOCKING FASTENERS
Fax (973) 244-9177
www.accuratescrew.com
MINIATURE STANDOFFS
Hi-Torque Locking Fasteners
Threads provided are class 2B, MIL-S-7742 for
materials of Rockwell hardness 70 or less (stainless
steel nuts) and 85 or less (carbon steel nuts) for hole
sizes .108 up to .150.
Typical retention forces are 150 lbs. push-out, and 25
inch lbs. torque-out in standard chassis aluminum.
Captive hardware facilitates easy one-side installing for
assemblies in normally hard-to-reach places.
Steel Inserts: for use in low carbon steels that are 1/2
hard or softer and for stainless steel in the annealed
condition.
Stainless steel inserts: for use in most aluminums or in
low carbon steels that are 1/4 hard or softer .
The Cadmium Plate Finish (7) for Carbon Steel and
the Passivate Finish (12) for Stainless Steel is
recommended.
LOCKING FASTENERS
Superior fastening performance
is provided by the miniature
press nut through strong,
permanent, wear-resistant
threads for soft brass,
aluminum, mild steel, or
thermoplastic panels, part or
chassis. Thread depth and
load retention is made constant regardless of sheet
material or thickness. Extension E provides additional
threads for thin, brittle materials.
Available Material (see page 275)
S
SS
Carbon Steel
Stainless Steel
ORDER EXAMPLE:
66060 - SS - 12
Basic
Part
Number
Material:
See chart
Finish:
See page
277
Tolerances (unless noted): Decimals ± .005, Frac ±1/64
Basic
Part No.
Thread
Size
D
Max
Sheet
Thickness
66060
66062
66064
66066
66068
66070
66072
66074
0-80
0-80
1-64
1-64
2-56
2-56
3-48
3-48
.030
.038
.030
.038
.030
.038
.030
.038
.032-.039
.040-up
.032-.039
.040-up
.032-.039
.040-up
.032-.039
.040-up
Hole Size
in Sheet
A
Max
C
Dia
.109-.112
.108
11/64
.120-.123
.119
3/16
B
Length
3/64
.136-.139
.135
13/64
.147-.150
.146
7/32
93
1-888-208-2008
LOCKING FASTENERS
Fax (973) 244-9177
www.accuratescrew.com
KNURLED STANDOFFS
Hi-Torque Locking Fasteners
LOCKING FASTENERS
The Knurled Standoffs permit
quick and neat fastening of
components, terminal boards,
brackets and sub-assemblies
in hard-to-get at places
without the need for nuts
and wrenches, washers or
lockpins.
Stainless steel inserts: for use in most aluminums or in
low carbon steels that are 1/4 hard or softer .
Steel inserts: for use in low carbon steels that are 1/2
hard or softer and for stainless steel in the annealed
condition.
Cadmium Plate Finish (7) for carbon steel and the
Passivate Finish (12) for stainless steel is
recommended.
Available Material (see page 275)
S
SS
Carbon Steel
Stainless Steel
ORDER EXAMPLE:
66076 - SS - 12
Basic
Part
Number
Basic
Part
No.
66076
66078
66080
66082
66084
66086
66088
66090
66092
66094
66096
66098
66100
66102
66104
66106
66108
66110
66112
66114
66116
66118
66120
66122
66124
66126
66128
66130
94
Thread
Size
2-56
3-48
4-40
6-32
8-32
10-24
10-32
Material:
See chart
D
Max
Thickness
.030
.038
.054
.087
.030
.038
.054
.087
.030
.038
.054
.087
.030
.038
.054
.087
.030
.038
.054
.087
.030
.038
.054
.087
.030
.038
.054
.087
.032-.039
.040-.055
.056-.090
.091- up
.032-.039
.040-.055
.056-.090
.091- up
.032-.039
.040-.055
.056-.090
.091- up
.032-.039
.040-.055
.056-.090
.091- up
.032-.039
.040-.055
.056-.090
.091- up
.032-.039
.040-.055
.056-.090
.091- up
.032-.039
.040-055
.056-.090
.091- up
Sheet
Finish:
See page
277
Hole
Size in
Sheet
.166
.169
.187
.190
.213
.216
.250
.253
Part configuration for sheet
thickness .032-.039
A
+.000
-.003
.165
.187
.212
.249
C
Dia
1/4
B
Length
± .010
.070
9/32
5/16
11/32
.090
Basic
Part
No.
66132
66134
66136
66138
66140
66142
66144
66146
66148
66150
66152
66154
66156
66158
66160
66162
66164
66166
66168
66170
66172
66174
66176
66178
Thread
Size
12-24
12-28
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
Undercut shape may vary.
D
Max
Thickness
.038
.054
.087
.038
.054
.087
.054
.087
.120
.054
.087
.120
.054
.087
.120
.054
.087
.120
.087
.120
.235
.087
.120
.235
.040-.055
.056-.090
.091- up
.040-.055
.056-.090
.091- up
.056-.090
.091-.124
.125- up
.056-.090
.091-.124
.125- up
.056-.090
.091-.124
.125- up
.056-.090
.091-.124
.125- up
.091-.124
.125-.249
.250- up
.091-124
.125-.249
.250- up
Tolerances (unless noted):
Decimals ±.005, Frac ±1/64
Sheet
Hole
Size in
Sheet
+.000
-.003
.277
.280
A
C
Dia
B
Length
.276
3/8
.130
.344
.347
.343
7/16
.170
.413
.416
.411
1/2
.230
.500
.503
.498
9/16
.270
± .010
1-888-208-2008
LOCKING FASTENERS
Fax (973) 244-9177
www.accuratescrew.com
KNURLED STANDOFFS
This fastener provides durable
threads for strong, uniform
attachment at all points on
panels and chassis of varying
thickness and material.
Extension E provides additional
thread length for thin panel
without restricting flush
mounting at the panel front.
Knurled Standof fs permit quick and neat fastening of
components, terminal boards, brackets and subassemblies in hard-to-reach places without the need for
nuts and wrenches, washers or lockpins.
Available Material (see page 275)
Aluminum 2011
T3
LOCKING FASTENERS
Hi-Torque Locking Fasteners
ORDER EXAMPLE:
66180 - 22
Basic
Part
Number
Basic
Part
No.
66180
66182
66184
66186
66188
66190
66192
66194
66195
66196
66198
66200
66202
66204
66206
66208
66210
66212
66214
Thread
Size
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
1/4-28
D
Finish:
See page
277
Sheet
+.000
-.005
Thickness
.038
.054
.038
.054
.038
.054
.038
.054
.087
.038
.054
.038
.054
.054
.087
.120
.054
.087
.120
.040 -.055
.056 - up
.040 -.055
.056 - up
.040 -.055
.056 - up
.040 -.055
.056 - up
.091 -.124
.040 -.055
.056 - up
.040 -.055
.056 - up
.056 -.090
.091 -.124
.125 - up
.056 -.090
.091 -.124
.125 - up
Hole
Size in
Sheet
.166
.169
.187
.190
.213
.216
.234
.237
Undercut shape may vary.
A
+.000
-.003
.165
C
Dia
B
Length
1/4
± .010
.070
.187
.090
.212
9/32
.233
5/16
.296
.299
.295
3/8 .160
.344
.347
.343
7/16
.130
.170
Basic
Part
No.
66216
66218
66220
66222
66224
66226
66228
66230
66232
66234
66236
66238
Thread
Size
5/16-18
5/16-24
3/8-16
3/8-24
D
Sheet
+.000
-.005
Thickness
.054
.087
.120
.054
.087
.120
.087
.120
.235
.087
.120
.235
.056 -.090
.091 -.124
.125 - up
.056 -.090
.091 -124
.125 - up
.091 -.124
.125 -.249
.250 - up
.091 -.124
.125 -.249
.250 - up
Hole
Size in
Sheet
A
+.000
-.003
C
Dia
B
Length
.413
.416
.411
1/2 .230
.500
.503
.498
9/16
± .010
.270
Tolerances (unless noted):
Decimals +.005, Frac +1/64
95
1-888-208-2008
LOCKING FASTENERS
Fax (973) 244-9177
www.accuratescrew.com
FLUSH STANDOFFS
Hi-Torque Locking Fasteners - Blind or Tapped Through
LOCKING FASTENERS
These fasteners have
an extended section
which provides
additional securingthread length and also
serves as a threaded
standoff spacer for
mounting panels or
brackets to a chassis.
These blind-threadseal press nuts protect against oil and moisture
penetration without the need for sealing washers. Thruthreaded units permit two-ended mounting; extension
on one end, flush-to-panel on the other .
Corrosion-proof stainless steel and light-weight
aluminum press nuts provide non-magnetic hardware
for mounting components and sub-assemblies in hardto-reach places, without the need for nuts, wrenches,
washers, or other extraneous hardware.
The reversed blind standoff is excellent for outdoor use,
because it protects against climatic elements.
Type NC
Maximum recommended panel hardness:
nuts, Rockwell B-70, Type NA nuts, Rockwell B-60.
Threads: Class 2B, MIL-S-7742.
Aluminum inserts: for use in grades of aluminum that
are non-heat treatable or that have an O or H temper .
Stainless steel inserts: for use in most aluminums or in
low carbon steels that are 1/4 hard or softer .
Material
A
SS
Finish
Aluminum 7075-T6
300 Stainless Steel
None (1)
Passivate (12)
ORDER EXAMPLE:
66264 - 4 - SS - 12
Basic
Part
Number
Length in
32nds:
See chart
Material:
See chart
Finish:
See page
277
To reverse thread for Blind Standoffs 8 and up, add prefixR to part
number. EXAMPLE: R-66264-8-SS-12
Blind Through Thread
Thread Thread
Size
Part No. Part No.
66264 66276 4-40
66266 66278 4-40
66268 66280 6-32
66270 66282 6-32
66272 66284 8-32
66274 66286 10-32
B
S
A
Dia
Hole Size
in Sheet
3/16
1/4
1/4
5/16
5/16
5/16
.125
.125
.156
.156
.188
.203
.166-.169
.213-.216
.213-.216
.281-.284
.281-.284
.281-.284
+.000
-.005
.165
.212
.212
.280
.280
.280
*D dimension in 32nds
Recommended Use:
4-40 & 6-32 IN SHEET .040-UP
8-32 & 10-32 IN SHEET .050-UP
D=
D=
C=
E=
96
Length in 32nds
Length in Inches
Counterbore Depth
Min Thread Depth
-4
-6
-8
1/8 3/16 1/4
None
5/64 1/8
-10
5/16
5/32
-12
3/8
-14 -16 -18 -20 -22 -24 -26 -28 -30 -32 -34
7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16
3/16
5/16
7/16
3/16 1/4 DP 16 - 20
3/8 DP 22 - 32
1-888-208-2008
LOCKING FASTENERS
Fax (973) 244-9177
www.accuratescrew.com
REVERSE FLUSH STANDOFFS
Hi-Torque Locking Fasteners - Stainless Steel
Stainless Steel Inserts: for use in most aluminums or in
low carbon steels that are 1/4 hard or softer .
Passivate Finish (12) for Stainless Steel is
recommended.
Extension Leng hs beyond 3/8 available. Contact ASM for price and delivery.
LOCKING FASTENERS
The round extension
nuts are designed for
standoff applications.
These nuts have a
round extension on the
hex side which provides
extra threads beyond
the panel surface.
CLEAR HOLE STANDOFFS
Available ID and Appropriate Code
ID +.004
Code Letter
–.003
Part
Number
66288
66290
66292
66294
66296
66298
66300
66302
66304
66306
Extension
Length in
32nds:
See chart
Thread
2-56
4-40
6-32
8-32
10-32
1/4-20
1/4-28
Panel
Thickness:
See chart
Mounting
Hole
± .002
Finish:
See page
277
B
Diameter
± .002
A
Diameter
± .005
.161
.203
.161
.203
.203
.265
.157
.199
.157
.199
.199
.261
.265
.261
.156
.203
.156
.203
.218
.250
.250
.281
.386
.382
.344
1 = 1/32
5 = 5/32
2 = 1/16
6 = 3/16
3 = 3/32
7 = 7/32
4 = 1/8
8 = 1/4
Hex
Size
3/16
1/4
3/16
1/4
1/4
5/16
5/16
7/16
NOTES: For applications requiring additional threads and extensions contact ASM.
.093 - ID
Panel
Thickness
See
Chart 1
See
Chart 2
A
B
C
D
E
Prefix letter code to part number.
EXAMPLE: A66288-4-SS-062-12
CHART 1
Basic
Part
Number
.093
.116
.140
.171
.196
Extension Length in 32nds
CHART 2
ORDER EXAMPLE:
66288 - 4 - .062 - 12
Panel
Thickness
.040
1/16 (.062)
3/32 (.093)
1/8 (.125)
5/32 (.156)
3/16 (.187)
1/8 (.125)
5/32 (.156)
3/16 (.187)
1/4 (.250)
5/16 (.312)
D
C
E
± .004
± .003 ± .003
.038
.058
.085
.117
.147
.177
.117
.147
.177
.236
.296
.012 .018
.019 .029
.029 .043
.029 .043
97
1-888-208-2008
LOCKING FASTENERS
Fax (973) 244-9177
www.accuratescrew.com
BLIND STANDOFFS
Hi-Torque Locking Fasteners - Stainless Steel Type 303
LOCKING FASTENERS
The blind standof
f is
recommended for use in
blind-hole applications such
as plates, castings and
behind front panels. This
non-magnetic stainless
steel standof f locks into
aluminum, mild steel, soft
brass and other materials of
Rockwell Hardness RB 70
or less. Typical holding specifications for a type 66312
unit in standard chassis aluminum 5052 H34 are 150 lbs.
pull-out, 30 lbs. torque-out; and for a type 66326 - unit
are 200 lbs. pull-out and 40 lbs. torque-out. In addition to
permitting mar-free panel surface, these standof
fs
present an inherent seal against external contaminants
such as dirt, oil and moisture. For DIRECT
Stud
mounting with inherent seal, use Blind Head Press Stud.
These are designed to provide permanent threads in
blind hole applications such as front panels, plates and
castings having a Rockwell hardness of RB 70 or less.
The Standof fs are available in thread sizes from 4-40
NC2B – 1/4-20 NC2B and lengths that are listed in
the table.
This blind head standof f is easily fastened to the panel
by placing it in a counterbored hole and pressing using
an arbor press or other steady pressure device.
ORDER EXAMPLE:
66312 - SS - 12
Basic
Part
Number
Material:
See chart
C
Part
Thread Length
Number
+.002 -.005
66312
66314 4-40
66316
66318
66320 6-32
66322
66324
66326
66328 8-32
66330
66332
66334 10-24
66336
66338
66340 10-32
66342
66344
66346 1/4-20
66348
3/16
1/4
5/16
1/4
5/16
3/8
1/2
5/16
3/8
1/2
3/8
1/2
5/8
3/8
1/2
5/8
5/8
3/4
1
Finish:
See page
277
B
D
A
E
Mounting
Hole
Max
Hex Size
.212
1/4
.165 3/16
.213-.216
.289
5/16
.213
1/4
.290-.293
.311
11/32
.245
1/4
.312-.315
.343
3/8
.290
3/8
.344-.347
.343
3/8
.290
3/8
.344-.347
.389
7/16
.354
3/8
.390-.393
± .005
Max
Full Thd
Min Dpth
Typical pull-out values in aluminum 5052
H34 are:
Thread
Pull-out
Torque-Out
4-40 thread
150#
30"#
8-32 thread
200#
40"#
Stainless steel inserts*: for use in most
aluminums or in low carbon steels that are
1/4 hard or softer.
Tolerances (unless noted):
Decimals +.005, Frac. +1/64
98
*The Passivate Finish (12) for stainless steel is recommended.
1-888-208-2008
LOCKING FASTENERS
Fax (973) 244-9177
www.accuratescrew.com
FLUSH NUT STYLE I
Hi-Torque Locking Fasteners are
simply pressed into place in a
drilled or punched hole, using an
arbor press, hydraulic press, or
other steady-pressure tool. Cold
flow of panel material into
channel grooves and knurls
provides permanent push, pull
and torque-resistant installation.
Flush Nut Style I non-magnetic stainless steel Hi-Torque
Locking Fasteners fit flush on both surfaces of panel,
replacing tapped holes, providing both the strength and
wear resistance of a nut.
Stainless steel inserts*: for use in most aluminums or in
low carbon steels that are 1/4 hard or softer .
ORDER EXAMPLE:
66000 - .062 - 12
!
Thread
2-56
4-40
6-32
8-32
10-32
1/4-20
1/4-28
Finish:
See page
277
Mounting Hole
± .002
.161
.203
.161
.203
.203
.265
Panel
Thickness
See
Chart 1
.265
.386
See Chart 2
.157
.199
.157
.199
.199
.261
Hex
Size
3/16
1/4
3/16
1/4
1/4
5/16
.261
5/16
.382
7/16
A Dia
± .002
CHART 1
Part
Number
66000
66002
66004
66006
66008
66010
66012
66014
66016
66018
Panel
Thickness:
See chart
CHART 2
Basic
Part
Number
LOCKING FASTENERS
Hi-Torque Locking Fasteners - Stainless Steel
Panel
C Dim
Thickness ± .004
.040
.038
1/16 (.062) .058
3/32 (.093) .085
1/8 (.125) .117
5/32 (.156) .147
3/16 (.187) .177
1/8 (.125) .117
5/32 (.156) .147
3/16 (.187) .177
1/4 (.250) .236
5/16 (.312) .296
B Dim D Dim
± .003 ± .003
.012
.019
.018
.029
.029
.043
.029
.043
TECH TIP
Parts go through a 5-stage cleaning pr ocess before plating.
* The Passivate Finish (12) for Stainless Steel is recommended.
99
1-888-208-2008
LOCKING FASTENERS
Fax (973) 244-9177
www.accuratescrew.com
FLUSH NUT STYLE II
Hi-Torque Locking Fasteners - Stainless Steel
LOCKING FASTENERS
Flush Nut Style II non-magnetic
stainless steel are recommended
for use where mounting
hardware protrusion above either
mounting surface cannot be
permitted.
Convenient hardware for
mounting in hard-to reach places,
Flush Nut Style II nuts provide hard, durable threads of
Class 2B, MIL -S -7742 for soft brass, aluminum, mild
steel or thermoplastic panels, parts or chassis of .061
sheet thickness or larger , where additional threads
provided in extension type nut is not required.
They
eliminate the need for wrenches and nuts, washers and
lockpins.
Typical retention values for 66024 nut in alloy 5052 H39
aluminum are 200 lbs. push-out, and 25-inch lbs. torqueout.
Maximum recommended panel hardness is: Rockwell
B-70.
Stainless steel inserts: for use in most aluminums or in
low carbon steels that are 1/4 hard or softer .
Tolerances (unless noted): Decimals ± .005, Frac. ± 1/64
ORDER EXAMPLE:
66024 - 12
Basic
Part
Number
Basic
Part Number
66024
66026
66028
66030
66032
66034
66036
66038
66040
66042
66044
66046
66048
66050
66052
66054
66056
66058
100
Finish:
See page
277
Thread
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
1/4-28
B
Max
.060
.090
.060
.090
.060
.090
.060
.090
.060
.090
.060
.090
.120
.151
.182
.120
.151
.182
Sheet
Thickness
.061-.090
.091- up
.061-.090
.091- up
.061-.090
.091- up
.061-.090
.091- up
.061-.090
.091- up
.061-.090
.091- up
.125-.155
.156-.186
.187- up
.125-.155
.156-.186
.187- up
Mounting
Hole
.172
.175
.172
.175
.213
.215
.290
.295
.312
.315
.312
.315
A
+.000 -.003
Hex
Size-C
.171
3/16
.212
1/4
.289
5/16
.311
11/32
.343
3/8
.344
.347
.344
.347
1-888-208-2008
LOCKING FASTENERS
Fax (973) 244-9177
www.accuratescrew.com
EXTENSION NUTS
Hex Extensions Nuts
are
dimensionally the same as
Flush style except for
extension beyond the panel
surface on the hex side.
Recommended for thin panels
as extension provides
additional threads. Extension
may be used as a spacer or
standoff for mounting panels or brackets to chassis.
ROUND
HEX
Hex (H),
Round (R) or
Square (S)
Panel
Thickness:
See chart
Extension Length
in 32nds*
1=
2=
3=
4=
5=
6=
7=
8=
Optional Extension Finish:
Length in 32nds: See page
See note & chart
277
Dimensions are for flush type nuts. To convert to dimensions of Hex
or Round styles, add extension leng hs to C dimension.
Part
Number
66240
66242
66244
66246
66248
66250
66252
66254
66256
66258
!
Thread
2-56
4-40
6-32
8-32
10-32
1/4-20
1/4-28
.161
.203
.161
.203
.203
.265
.157
.199
.157
.199
.199
.261
Hex
Size
3/16
1/4
3/16
1/4
1/4
5/16
.265
.261
5/16
Mount
A Dia
Hole +.002
± .002
.386
.382
7/16
1/32
1/16
3/32
1/8
5/32
3/16
7/32
1/4
Panel
Thickness
See
Chart 1
See
Chart 2
CHART 1
Basic
Part
Number
Stainless steel inserts: for use in most aluminums or in
low carbon steels that are 1/4 hard or softer .
CHART 2
ORDER EXAMPLE:
66240 - H - .062 - 2 - 12
Round Extension Nuts
are
dimensionally similar to FL and
Hex styles except that the nut
opposite the hex is extended
beyond the panel surface.
Provides additional threads in
thin panels and may be used
as a standoff mounting.
LOCKING FASTENERS
Hi-Torque Locking Fasteners - Stainless Steel
Panel
Thickness
.040
1/16 (.062)
3/32 (.093)
1/8 (.125)
5/32 (.156)
3/16 (.187)
1/8 (.125)
5/32 (.156)
3/16 (.187)
1/4 (.250)
5/16 (.312)
C Dim
B Dim
± .004
± .003
± .003
.038
.058
.085
.117
.147
.177
.117
.147
.177
.236
.296
.012
.019
.018
.029
.029
.043
.029
.043
D Dim
TECH TIP
Captive screw assemblies can be supplied with a variety of dif ferent flat
and captive washers.
*Extension lengths beyond 3/8 available. Check factory for price and delivery .
101
1-888-208-2008
LOCKING FASTENERS
Fax (973) 244-9177
www.accuratescrew.com
BLIND NUTS
Hi-Torque Locking Fasteners - Stainless Steel - Carbon Steel
LOCKING FASTENERS
This non-magnetic stainless
steel fastener is ideal for use in
assemblies requiring a
moisture seal and in corrosive
atmospheres. It presents an
inherent seal against entrance
of dirt, oils and moisture, which
cannot be supplied by nut and
screw type hardware without
elaborate seals and a timeconsuming assembly procedure.
The fastener also provides the usual mounting capability
for tight or normally inaccessible places. Extension E
provides additional thread length for thin panels.
Our Extension Stainless Steel precision blind press nuts
will provide strong threads of class 2B MIL-S-7742 for
use in aluminum, mild steel and other materials of
Rockwell Hardness 70 or less.
Typical push-out and torque-out maximums for a 66356040-12 nut in standard chassis aluminum are 170 lbs.,
and 20 inch lbs. respectively.
Steel inserts**: for use in low carbon steels that are 1/2
hard or softer and for stainless steel in the annealed
condition.
Stainless steel inserts**: for use in most aluminums or in
low carbon steels that are 1/4 hard or softer .
ORDER EXAMPLE:
66344 - .040 - 12
Basic
Part
Number
Panel
Thickness
Finish:
See page
277
See page 103 for part numbers and dimension info.
!
102
TECH TIP
Our new in-house passivation pr ocess, certified to QQP35C-AMS2700B-MIL F
14072D, further improves our lead times.
**The Cadmium Plate Finish (7) for Carbon Steel and the Passivate Finish (12) for Stainless Steel is recommended.
1-888-208-2008
LOCKING FASTENERS
Fax (973) 244-9177
www.accuratescrew.com
BLIND NUTS
Stainless Steel
Basic
Part
Thread
Number
66344 - 040
66346 - 056 4-40
66348 - 091
66350 - 040
66352 - 056 6-32
66354 - 091
66356 - 040
66358 - 056 8-32
66360 - 091
66362 - 040
66364 - 056 10-24
66366 - 091
66368 - 040
66370 - 056 10-32
66372 - 091
66374 - 056
66376 - 091 1/4-20
66378 - 125
Carbon Steel
Basic
Part
Thread
Number
66380 - 040
4-40
66382 - 056
66384 - 091
66386 - 040
6-32
66380 - 056
66390 - 091
66392 - 040
8-32
66394 - 056
66396 - 091
66398 - 040
66400 - 056 10-24
66402 - 091
66404 - 040
66406 - 056 10-32
66408 - 091
66410 - 056
66412 - 091 1/4-20
66414 - 125
Max
Sheet
Thickness
.038
.054
.087
.038
.054
.087
.038
.054
.087
.038
.054
.087
.038
.054
.087
.054
.087
.120
.040-.055
.056-.090
.091- up
.040-.055
.056-.090
.091- up
.040-.055
.056-.090
.091- up
.040-.055
.056-.090
.091- up
.040-.055
.056-.090
.091- up
.056-.090
.091-.124
.125- up
G
Max
Sheet
Thickness
.038
.054
.087
.038
.054
.087
.038
.054
.087
.038
.054
.087
.038
.054
.087
.054
.087
.120
.040-.055
.056-.090
.091- up
.040-.055
.056-.090
.091- up
.040-.055
.056-.090
.091- up
.040-.055
.056-.090
.091- up
.040-.055
.056-.090
.091- up
.056-.090
.091-.124
.125- up
G
Tolerances (unless noted): Decimals ± .005, Frac. ± 1/64
Hole
Size
E
B
F
A
D
C
Max
± .010
Max
± .010
Max
.149
.38
.335
3/16
.187
.186 9/32 .169
.190
.38
.335
3/16
.213
.212 5/16 .204
.216
.44
.385
1/4
.250
.249 11/32 .235
.253
.44
.385
1/4
.344
.342 7/16 .305
.347
.56
.500
5/16
E
.166
.165 1/4
.169
Hole
Size
B
F
A
D
C
Max
± .010
Max
± .010
Max
.149
.38
.335
3/16
.187
.186 9/32 .169
.190
.38
.335
3/16
.213
.212 5/16 .204
.216
.44
.385
1/4
.250
.249 11/32 .235
.253
.44
.385
1/4
.344
.342 7/16 .305
.347
.56
.500
5/16
.166
.165 1/4
.169
LOCKING FASTENERS
Hi-Torque Locking Fasteners
103
1-888-208-2008
LOCKING FASTENERS
Fax (973) 244-9177
www.accuratescrew.com
PRESS NUT-SPLINE
Hi-Torque Locking Fasteners - Carbon Steel, Stainless Steel
LOCKING FASTENERS
Push-out and torque-out values for a 66490 press nut in
glass epoxy laminate are 100 lbs., and 20 inch lbs.
respectively.
Steel inserts: for use in low carbon steels that are 1/2
hard or softer and for stainless steel in the annealed
condition.
Spline-Type press nuts (carbon-steel and non-magnetic
stainless-steel) are designed to provide wear resistant,
strong threads of class 2B MIL-S-7742 for plastic and
non-ductile materials such as glass-composite boards,
epoxies, polycarbonates, nylon and paper as well as for
aluminum and zinc castings.
Stainless steel inserts: for use in most aluminums or in
low carbon steels that are 1/4 hard or softer .
The Cadmium Plate Finish (7) for Carbon Steel and the
Passivate Finish (12) for Stainless Steel is
recommended.
Parts designed for material thickness .060 and up.
The torque resisting splines literally cut their way down
into the mounting material, biting in for torque resistance
and providing a holding collar against pull-out forces.
Available Material (see page 275)
S
SS
Carbon Steel
Stainless Steel
ORDER EXAMPLE:
66472 - SS - 12
Basic
Part
Number
!
104
Material:
See chart
Finish:
See page
277
Part
Number
66472
66474
66476
66478
66480
66482
66484
66486
Thread
2-56
3-48
4-40
6-32
8-32
10-24
10-32
1/4-20
C
A
Stock
±.003
3/32
7/32
15/64
7/32
9/32
11/32
.165
.177
.184
.231
.268
1/8
3/8
.290
Hole Size
in Sheet
.146-.150
.158-.162
.166-.170
.213-.217
.250-.254
.
.272-.276
15/64
7/16
.346
.328-.332
B
1/16
TECH TIP
The specially engineered spline bevels minimize destructive compr ession
forces normally developed on entr y, which can fracture non-ductile
brittle materials.
Tolerances (unless noted): Decimals ± .005, Frac. ± 1/64
1-888-208-2008
LOCKING FASTENERS
Fax (973) 244-9177
www.accuratescrew.com
SPLINE PRESS EXTENSION NUT
Spline Press Extension Nuts
are made or case-hardened
carbon steel and non-magnetic
stainless steel.
which can fracture non-ductile substrate materials. The
extension enables the user to space brackets and other
associated hardware away from the chassis housing.
Typical push-out, and torque-out values in glass epoxy
laminate are 100 lbs., and 20 inch lbs. respectively .
The torque resisting splines
literally cut their way down into
the mounting material, biting in
for torque resistance and
providing a holding collar
against pull-out forces.
The
specially engineered spline
bevels minimize destructive
compression forces normally encountered on entry
,
Steel inserts*: for use in low carbon steels that are 1/2
hard or softer and for stainless steel in the annealed
condition.
Stainless steel inserts*: for use in most aluminums or in
low carbon steels that are 1/4 hard or softer .
LOCKING FASTENERS
Hi-Torque Locking Fasteners - Carbon Steel, Stainless Steel
Available Material (see page 275)
S
SS
Carbon Steel
Stainless Steel
ORDER EXAMPLE:
66488 - SS - 16 - 12
Basic
Part
Number
Material:
See chart
Extension
Length in 32nds:
See chart
D
Part
Number
Thread
66488
66490
66492
66494
4-40
6-32
–
–
Hole Size
+.004 –.003
–
–
.116
.143
Finish:
See page
277
C
Stock
± .003
Mounting
Hole Size
7/32
9/32
7/32
9/32
.184
.231
.184
.231
.166-.170
.213-.217
.166-.170
.213-.217
A
B Length in 32nds
4
8
12
16
20
24
Length in inches
.125
.250
.375
.500
.625
.750
D Minimum Thread Length
Tapped Thru
28
!
32
.875 1.00
3/8 ± 1/64
*The Cadmium Plate Finish (7) for Carbon Steel and the Passivate Finish (12) for Stainless Steel is recommended.
TECH
TIP
Spline press
extension nuts are
designed for use in
thin metal panels
and brittle plastic
parts where tapped
holes are not
satisfactory.
105
1-888-208-2008
LOCKING FASTENERS
Fax (973) 244-9177
www.accuratescrew.com
BLIND PRESS STUD
Hi-Torque Locking Fasteners
LOCKING FASTENERS
Type BSTK Press Studs are designed for fully-seatedknurl installation in .093 or thicker stock, to provide
consistently superior torque and pull-out resistance.
They are mounted in blind holes in panels, plates and
castings of aluminum, soft brass, mild steel or
thermoplastic panels and other materials of Rockwell
Hardness B70 or less, (stainless); B50 (aluminum).
This fastener type is ideally suited for front panel work
where no hardware can be visible. Aluminum studs are
lightweight and can be anodized with the panel after
assembly, eliminating the potential for scratching the
front panel. For highly corrosive, and salt-spray
environments, we recommend the use of stainless
studs.
Typical pull-out and torque-out maximum values for
stainless steel stud in standard chassis aluminum are
100 lbs., 40 inch lbs., respectively.
All threads are Class 2A, MIL-S-7742.
Available Material
(see page 275)
A
Aluminum
SS
Stainless Steel
ORDER EXAMPLE:
66568 - SS - 20 - 12
Material:
See chart
Basic
Part
Number
Extension
Length in 32nds:
See chart
Finish:
See page
277
Part
Number
Thread
A
Max
Mtg Hole
Counterbore Dia
B
Stock Size
66568
66570
66572
4-40
6-32
8-32
.171
.212
.289
.172-.175
.213-.216
.290-.293
13/64
1/4
21/64
L Dimension in 32nds*
6 = 3/16
8 = 1/4
10 = 5/16
12 = 3/8
14 = 7/16
18 = 9/16
20 = 5/8
24 = 3/4
32 = 1
*Other leng hs available. Consult factory
for price and delivery.
Thread
Size
4-40
6-32
8-32
106
1/4
3/8
1/2
-8
-12
-16
L Length in 32nds
5/8
3/4
-20
-24
1
-32
1-1/4
-40
1-1/2
-48
Recommended Finishes
Passivate (12)
Stainless Steel
None (1)
Aluminum
INSTALLATION NOTE: Minimum panel thickness .093
Conterbore flat bottom hole to depth .080 +.005 /-.000. Tolerances (unless noted): Decimals ± .005, Frac. ± 1/64.
1-888-208-2008
LOCKING FASTENERS
Fax (973) 244-9177
www.accuratescrew.com
FLUSH STUD
Hi-Torque Locking Fasteners - Stainless Steel, Passivate Finish
LOCKING FASTENERS
These style studs provide
mounting studs in soft
materials, without any
projection beyond the outside
surface. With stud locked in
panel, assembly of other parts
is easier and faster . Hex, major and minor diameters
same as flush style.
See page 109.
ORDER EXAMPLE:
66548 - .062 - 6 - 12
Basic
Part
Number
Panel
Thickness:
See chart
Extension
Length in 32nds:
See chart
L Dimension in 32nds*
6 = 3/16
8 = 1/4
10 = 5/16
Finish:
See page
277
12 = 3/8
14 = 7/16
18 = 9/16
20 = 5/8
24 = 3/4
32 = 1
*Other lengths available. Consult factory
for price and delivery.
2-56
4-40
6-32
8-32
10-32
1/4-20
1/4-28
Mounting
Hole
A Dia
Hex
Size
.161
.203
.161
.203
.203
.265
.157
.199
.157
.199
.199
.261
3/16
1/4
3/16
1/4
1/4
5/16
.265
.261
5/16
± .002
.386
± .002
.382
!
7/16
Panel
Thickness
See
Chart 1
See
Chart 2
CHART 1
66548
66550
66552
66554
66556
66558
66560
66562
66564
66566
Thread
CHART 2
Part
Number
Panel
Thickness
.040
1/16 (.062)
3/32 (.093)
1/8 (.125)
5/32 (.156)
3/16 (.187)
1/4 (.250)
1/8 (.125)
5/32 (.156)
3/16 (.187)
1/4 (.250)
5/16 (.312)
C
B
D
± .004
± .003
± .003
.038
.058
.085
.117
.147
.177
.236
.117
.147
.177
.236
.296
.012
.019
.018
.029
.029
.043
.029
.043
TECH TIP
Visit www.accuratescrew.com
for more Tech Tips!
107
1-888-208-2008
LOCKING FASTENERS
Fax (973) 244-9177
www.accuratescrew.com
CONCEALED HEAD STUD
Hi-Torque Locking Fasteners
LOCKING FASTENERS
These concealed head studs are designed for
permanent installation in “blind holes”. Studs are
made of corrosion resistant stainless steel and are
designed with a hex head that provides permanent
installation in panels, chassis and aluminum die
castings.
No special tooling is required. Quick and easy
installation is achieved by pressing the concealed
head stud into place in a counterbored hole with an
arbor press or other pressure device. Cold flow of
the displaced panel material captivates and locks
the stud into place securely and positively . Parts
are available in lengths of 1/4" up, thread sizes are
from 4-40 to 5/16-18. All threads Class 2A.
Available Material (see page 275)
ORDER EXAMPLE:
66580 - SS - 20 - 12
Basic
Part
Number
Material:
See chart
Stud Length
in 32nds:
See chart
S
SS
Finish:
See page
277
Carbon Steel
Stainless Steel
Recommended Finishes
Carbon Steel
Stainless Steel
Cadmium (7)
Passivate (12)
L Dimension in 32nds
Part
Number
Thread 1/4
66580
66582
66584
66586
66588
66590
4-40
6-32
8-32
10-24
10-32
1/4-20
3/8
5/8
3/4
1
1-1/4
1-1/2
Mounting
A Dia
Hole Dia
Max
Hex
Size
± .003
-8
-12
-16
-20
-24
-32
-40
!
108
1/2
-48
.172
.213
.290
.312
.312
.344
.171
.212
.289
.311
.311
.343
3/16
1/4
5/16
11/32
11/32
3/8
TECH TIP
Concealed head studs are
designed for permanent
installation in “blind holes”.
NOTES: The Cadmium Plate Finish (7) for Carbon Steel and the Passivate Finish (12) for Stainless Steel is recommended.
Minimum panel thickness 3/32"
Depth of counterbore in panel .080 +.005
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
SELF-LOCKING DEVICES
ASM offers the broadest range of top quality self-locking
fasteners available today for both military and
commercial applications. ASM is your QPL APPROVED
SOURCE for Patch fasteners which meet or exceed the
requirements of Specifications MIL-F-18240, IFI 124 and
IFI 524. Call or write for quotations.
PELLET Add SLD to end of part number
ASM Pellet is a special, tough Nylon plug, inserted into a drilled hole, which makes any threaded fastener selflocking and self-sealing while leaving it fully adjustable. Its high internal strength and resiliency help resist,
deformation after repeated use.
RECOMMENDED FOR ALL MATERIALS INCLUDING PLASTICS (NYLON, ETC.)
(Slight over spray may be evident on face.) Yellow Patch processes make threaded fasteners of all sizes and
configurations self-locking and self-sealing, while leaving them fully adjustable. Yellow Patch is completely dry
and fused to the fastener, requiring no curing time after installation. Its internal strength and resiliency remain
high, even after continual re-use.
NOT RECOMMENDED FOR PLASTICS (NYLON, ETC OR ALUMINUM). RECOMMENDED FOR METAL ONLY.
STRIP Add SLDS to end of part number
Strip is a tough bar of Nylon, inserted into a milled slot in a threaded fastener , which makes it self-locking and
self-sealing. Ideal for military and commercial fasteners. Strip performs well in both high and low temperature
extremes. Its compressibility, resiliency and strength allow repeated removals or adjustments. Excellent for use
in non-metallic material; i.e. nylon, teflon, etc.
RECOMMENDED FOR ALL MATERIALS INCLUDING PLASTICS (NYLON, ETC.)
SCREWS
EXTERNAL PATCH Add PAT to end of part number
INTERNAL PATCH (for #6-32 & larger) Add IPAT to part number
These features can be added to...
Male/Female Standoffs
(pages 27-33, 38-40)
Captive Screws
(pages 113-114)
Male Spacer Adapters
(page 41)
Shoulder Screws
(pages 158-164)
Double Ended Male Standoff
(pages 34-35)
Thumb Screws
(pages 168-170)
SELF-LOCKING DEVICE
MIL-F-18240
ORDER EXAMPLE:
14040 - H - A - .500 - 1 - SLD
Hex (H),
Material
Round (R)
or Square (S)
Basic
Part
Number
Length:
Fill in your length,
any increment
Finish
Self-Locking
Device
SUGGESTED PELLET DIAMETERS FOR THREAD SIZES INDIC ATED (Bolts, Screws & Set Screws)
Threaded
Diameter
Nylon Pellet
Diameter
#0
#1
.030 .030
#2
#3
.030 .050
#4
#5
.050 .063
#6
#8
.063 .080
#10
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
.093 .108
.125
.140 .140
.153
.153 .170 .184 .184 .184
109
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
The Latest
Innovation in
Fastener
Technology!
Front-Mount
Retainer Assembly
WHAT IS THE FMR2002?
SCREWS
• The FMR2002 is a new pa tented multi-purpose
fastener developed by ASM that is available
externally/internally threaded for use as a retainer
assembly (Fig. A) or threaded standoff (Fig. C) - plus
it can be ordered without internal threads for use as
a clear-hole standoff/spacer (Fig. B).
• The FMR2002 is completely installed from the
front of a panel due to its unique external threaded
design – you simply drill, tap, and install with a
standard socket or open ended wrench.
Call our Sales Department today a t 1-888-208-2008 for
complete details.
Visit our Web site at www.accuratescrew.com to view a
video clip of the FMR2002’s easy front mount installa tion.
Fig. A
Fig. B
• The FMR2002 is produced hex-headed and is
available in brass, steel, or stainless steel.
HOW DOES THE FMR2002
SAVE TIME AND MONEY?
Fig. C
• Reduces Panel Assembly Time up to 20% due to
the unique completely front mount (or single-sided)
installation process.
• Cuts Production Setup Costs because there is no
need for anvil/punch sets or equipment, such as an
arbor press, punch press, or drill press.
• Eliminates Product Rejection Rates on bent,
cracked, or bulging panels because, unlike traditional
swaged or flared products tha t require a pressing
force for installation, the FMR2002 simply screws
tightly into place.
• Allows Onsite Product Repair due to its external
threaded design and installation, which enables the
FMR2002 to be easily removed and reused.
110
(Available assembly head style info. located on page 112)
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
Front-Mount
Retainer Assembly
The FMR2002 is an excellent alternative to existing flared and swage standoff products…
In Applications With Restricted Installation Space
Fig. C
Fig. D
SCREWS
The FMR2002 completely installs from the front (or a
single-side) of a panel using a standard socket or open
ended wrench (Fig. C). This dramatically reduces clearance
and accessibility constraints normally associa ted with
traditional retainer/standoff products that require installation
using a press, anvil, or punch (Fig. D).
In Applications With Panel Edge Distortion Concerns
The FMR2002 can be installed much c loser to the edge of a
panel (Fig. E) than a traditional retainer/standoff without
concerns about panel distortion. This is possible because
the shank portion of the FMR2002 is screwed in ra ther than
pressed, which lessens the force and stress a pplied to the
panel material, eliminating any bulging or cracking issues
(Fig. F).
Fig.
E
Fig. G
PC Board
Fig.
F
THE FMR2002 IS A PERFECT CHOICE
FOR USE IN PCB APPLICATIONS!
See Fig. G
For FMR2002 standoff information please refer to the product section starting on pa ge 7.
111
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
Front-Mount
Retainer Assembly
Available Material (see page 275)
See page 157 for
Lock Washers
A
B
S
SS
SCREWS
ORDER EXAMPLE:
114050 - PS - .500 - U - SS - 12
Basic Part
Number:
See styles below
for page number
T
Captive
Screw Thread
P
2-56
4-40
6-32
8-32
10-32
10-24
1/4-20
.062
.093
.093
.093
.093
.093
.125
M
8-32
10-32
1/4-28
1/4-28
5/16-24
5/16-24
3/8-24
Aluminum
Brass
Steel
Stainless Steel
Pan Head
Slotted (PS) or
Phillips (PP)
S
Hex
Shank
Code
R
± .003
3/16
1/4
5/16
5/16
3/8
3/8
7/16
U
V
W
X
Y
Z
.125
.187
.250
.312
.375
.500
Length
Shank Code:
See chart
below
Material:
See chart
above
Finish:
See page
277
ASSEMBLY INSTALLED
AVAILABLE SCREW STYLES
The NEW FMR2002 is available in aluminum, brass, steel and stainless steel in the screw styles shown below .
Refer to these pages for screw dimensions.
112
FRONT-MOUNT PAN HEAD, SLOTTED
or PHILLIPS. See page 117.
FRONT-MOUNT ROUND HEAD SCREW,
SLOTTED or PHILLIPS. See page 126.
FRONT-MOUNT HEX SOCKET
LOW HEAD SCREW. See page 139.
FRONT-MOUNT BINDING HEAD SCREW,
SLOTTED ONLY. See page 120.
FRONT-MOUNT SOCKET HEAD CAP SCREW
FRONT-MOUNT HEX SOCKET
BUTTON HEAD SCREW. See page 141.
FRONT-MOUNT FILLISTER HEAD SCREW,
SLOTTED or PHILLIPS. See page 123.
FRONT-MOUNT HEX HEAD SCREW
See page 129.
See page 132.
FRONT-MOUNT 6-LOBE SOCKET
BUTTON HEAD SCREW. See page 144.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
CAPTIVE PANEL SCREWS
For Retainers and Split Washers, see pages 190-197.
ORDER EXAMPLE:
702 - 1.500 - SS - 12
Length
NS suffix indicates No Slot.
EXAMPLE: 702-1.500-SS-12-NS
Basic
Part
No.
700
702
704
706
708
710
712
714
716
717
Thread
Material:
See chart
4-40 UNC-2A .375 to 1.0
6-32 UNC-2A .500 to 2.0
8-32 UNC-2A .500 to 2.0
10-24 UNC-2A .625 to 2.0
10-32 UNF-2A .625 to 2.0
1/4-20 UNC-2A .750 to 3.0
1/4-28 UNF-2A .750 to 3.0
5/16-18 UNC-2A 1.000 to 3.0
5/16-24 UNF-2A 1.000 to 3.0
3/8-16 UNC-2A 1.000 to 3.0
Thread
718
720
722
724
726
728
730
732
734
736
738
740
4-40 UNC-2A
6-32 UNC-2A
6-32 UNC-2A
8-32 UNC-2A
10-24 UNC-2A
10-32 UNF-2A
12-24 UNC-2A
1/4-20 UNC-2A
1/4-20 UNC-2A
1/4-28 UNF-2A
1/4-28 UNF-2A
5/16-24 UNF-2A
Available Material (see page 275)
A
B
S
SS
Optional self-locking device
available. Add SLD to end of part
number (see page 109).
L ± .015
Increments
of 1/16
Basic
Part
No.
Finish:
See page 277
Aluminum
Brass
Steel
Stainless Steel
C
E
D
F
B
A
J
± 1/64
+.005
-.000
+.010
-.000
+.000
-.015
Ref.
± .005
± .010
+.000
-.016
5/16 x 5/16
5/16 x 5/16
5/16 x 5/16
3/8 x 7/16
3/8 x 7/16
1/2 x 9/16
1/2 x 9/16
5/8 x 11/16
5/8 x 11/16
5/8 x 11/16
.047
.047
.047
.063
.063
.078
.078
.094
.094
.094
.078
.078
.078
.094
.094
.094
.094
.125
.125
.125
.125
.212
.212
.250
.250
.313
.313
.375
.375
.375
5/64
3/32
3/32
5/32
5/32
3/16
3/16
1/4
1/4
1/4
.078
.095
.120
.130
.130
.175
.175
.230
.230
.280
–
–
–
–
–
–
–
–
–
–
.078
.095
.120
.130
.130
.175
.175
.230
.230
.280
H Dia G Lgth
+.015
-.005
L ± .015
Increments
of 1/16
H Dia G Lngth
.375 to 2.0
.375 to 2.0
.375 to 2.0
.625 to 2.0
.625 to 3.0
.625 to 3.0
.625 to 3.0
.625 to 3.0
.625 to 3.0
.625 to 3.0
.625 to 3.0
.625 to 3.0
5/16 x 3/16
5/16 x 3/16
3/8 x 3/16
7/16 x 1/4
7/16 x 1/4
7/16 x 1/4
9/16 x 1/4
9/16 x 1/4
3/4 x 1/4
9/16 x 1/4
3/4 x 1/4
9/16 x 1/4
+.015
–.005
± 1/64
Knurl
Chamfer
Teeth Diametrical 45°
Max.
per inch Pitch
40.7
40.7
40.7
30.6
30.6
30.6
30.6
20.4
20.4
20.4
C
E
D
B
A
+.005
–.000
+.010
–.000
± 1/64
± .005
± .010
.031-.041
.040-.050
.040-.050
.063
.063
.063
.063
.063
.063
.063
.063
.063
.063
.063
.063
.063
.063
.063
.094
.094
.125
.094
.125
.094
9/32
9/32
9/32
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
.078
.095
.095
.120
.130
.130
.152
.175
.175
.175
.175
.235
–
–
–
–
–
–
–
–
–
–
–
–
128
128
128
96
96
96
96
64
64
64
SCREWS
Basic
Part
Number
.022
.022
.022
.030
.030
.038
.038
.041
.041
.041
Knurl
Pitch
40
40
40
40
30
30
30
30
30
30
30
30
113
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
CAPTIVE PANEL SCREWS
For Retainers & Split Washers, see pages 190-197.
Available Material (see page 275)
A
B
S
SS
Aluminum
Brass
Steel
Stainless Steel
ORDER EXAMPLE:
745 - 1.500 - SS - 12
Basic
Part
Number
Length
SCREWS
NS suffix indicates No Slot.
EXAMPLE: 745-1.500-SS-12-NS
Thread
L ± .015
Increments
of 1/16
745
747
4-40 UNC-2A
6-32 UNC-2A
.375 to 2.0
.500 to 2.0
Basic
Part
No.
Thread
L ± .015
Increments
of 1/16
.625 to 2.0
.625 to 2.0
.625 to 3.0
.625 to 3.0
.625 to 3.0
.625 to 3.0
.625 to 3.0
.750 to 3.0
!
114
Optional self-locking device
available. Add SLD to end of part
number (see page 109).
Basic
Part
No.
749 8-32 UNC-2A
751 8-32 UNC-2A
752 10-24 UNC-2A
753 10-32 UNF-2A
755 10-32 UNF-2A
757 12-24 UNC-2A
759 1/4-20 UNC-2A
761 1/4-20 UNC-2A
Finish:
See page 277
Material:
See chart
H Dia
+.015
-.005
G
Lngth
± .1/64
5/16 x 1/8
5/16 x 1/8
H Dia
+.015
-.005
G
Lngth
± .1/64
1/2 x 3/16
5/8 x 3/16
1/2 x 3/16
1/2 x 3/16
5/8 x 3/16
5/8 x 3/16
5/8 x 3/16
3/4 x 1/4
+.005
-.000
C
+.010
-.000
+.010
-.005
F
B
A
N
± .005
± .010
+.000
-.016
M
Ref.
± .010
± .010
Knurl
Pitch
.047
.047
.078
.078
3/16
3/16
1/8
1/8
.078
.095
–
–
.078
.095
13/64
13/64
1/16
1/16
40
40
C
E
E
D
D
+.005
-.000
+.010
-.000
+.010
-.005
.063
.063
.063
.063
.063
.078
.078
.078
.078
.078
.094
.094
.094
.094
.094
.094
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
F
B
A
Ref.
± .005
± .010
1/8
1/8
1/8
1/8
1/8
1/8
1/4
1/4
.120
.120
.130
.130
.130
.152
.175
.175
TECH TIP
–
–
–
–
–
–
–
–
J
+.000
-.016
J
M
N
± .010
± .010
Knurl
Pitch
.120
.120
.130
.130
.130
.152
.175
.175
13/32
1/2
13/32
13/32
1/2
1/2
1/2
1/2
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/8
40
40
30
30
30
30
30
30
ASM can manufacture knurled captive panel
screws with six lobe and hex drive featur es.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
CAPTIVE SCREWS
Retainers & Split Washers, see pages 190-197.
Captive Panel
Screw Assembly
Panel Washer
See top of page 243 for details.
Available Material
(see page 275)
Aluminum
Brass
Steel
Stainless Steel
ORDER EXAMPLE:
771 - 1.500 - SS - 12
Basic
Part
Number
Length
Finish:
See page 277
Material:
See chart
NS suffix indicates No Slot.
EXAMPLE: 765-.375-SS-12-NS
No Slot
Optional self-locking device available. Add SLD to end of part number
(see page 109).
CAPTIVE PANEL SCREW ASSEMBLY
ORDER EXAMPLE:
771 - 1.500 - SS - A - 12
Length
Basic
Part
Number
Material:
See chart
Basic
Part
No.
Thread
L ± .015
Increments
of 1/16
765
767
769
771
773
4-40 UNC-2A
6-32 UNC-2A
8-32 UNC-2A
10-24 UNC-2A
10-32 UNF-2A
.375 to 2.0
.500 to 2.0
.500 to 2.0
.625 to 3.0
.625 to 3.0
Basic
Part
No.
Thread
L ± .015
Increments
of 1/16
Max
Min
Max
Min
Max
Min
Max
Min
775
777
779
781
783
785
787
789
791
2-56 UNC-2A
3-48 UNC-2A
4-40 UNC-2A
4-48 UNF-2A
6-32 UNC-2A
6-40 UNF-2A
8-32 UNC-2A
10-24 UNC-2A
10-32 UNF-2A
.250 to 2.0
.250 to 2.0
.312 to 2.0
.312 to 2.0
.375 to 3.0
.375 to 3.0
.500 to 3.0
.625 to 3.0
.625 to 3.0
.140
.161
.183
.183
.226
.226
.270
.313
.313
.124
.145
.166
.166
.208
.208
.250
.292
.292
.083
.095
.107
.107
.132
.132
.156
.180
.180
.066
.077
.088
.088
.111
.111
.133
.156
.156
.031
.035
.039
.039
.048
.048
.054
.060
.060
.023
.027
.031
.031
.039
.039
.045
.050
.050
.037
.043
.048
.048
.060
.060
.071
.083
.083
.025
.030
.035
.035
.045
.045
.054
.064
.064
G
HD
Max Min
Sharp Sharp
.225
.279
.332
.385
.385
.207
.257
.308
.359
.359
C
E
D
Abs
Min
Max
Min
Max
Min
Max
Min
.195
.244
.292
.340
.340
.104
.128
.152
.176
.176
.084
.105
.126
.148
.148
.039
.048
.054
.060
.060
.031
.039
.045
.050
.050
.059
.074
.088
.103
.103
.049
.060
.072
.084
.084
HD
C
G
Assembly
with Panel
Washer
E
F
Finish:
See page
277
P
B
± .010
± .005 ± .005
3/16
1/4
1/4
1/4
1/4
.096
.121
.142
.164
.164
D
B
± .010
± .005
1/8
1/8
5/32
5/32
3/16
3/16
3/16
1/4
1/4
.061
.070
.078
.078
.095
.095
.120
.130
.130
SCREWS
A
B
S
SS
.078
.095
.120
.130
.130
+.020
-.000
.067
.083
.100
.116
.116
P
Max
Min
.062
.070
.079
.079
.096
.096
.113
.130
.130
.053
.161
.069
.069
.086
.086
.102
.118
.118
115
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
CAPTIVE SCREWS - LOCK ASSEMBLY
Available For All Captive Panel Scr ews
In Any Head Styles and Thr ead Sizes – In Steel or Stainless Steel
SCREWS
ORDER EXAMPLE:
114070 - FS - .500 - SS - BW - 12
Fillister Head
Slotted (FS) or
Phillips (FP)
Basic
Part
Number
Length:
L
Select captive screws from pages 117-156.
Add BW to end of part number .
Material:
See chart
Belleville
Washer
Available Material (see page 275)
S
SS
Spring Steel
Stainless Steel
Finish:
See page
277
For Stainless Steel Screws:
EXAMPLE: 114070-FS-.500-SS-BW-12
Stainless Steel
Belleville Washer
For Steel Screws:
EXAMPLE: 114070-FS-.500-S-BW-7
Heat-treated Spring Steel
Belleville Washer
Belleville Washer Selection Data
Supplied assembled • Availability is from stock - 2 weeks
Thread
B
ID
A
OD
C
Thickness
D
Height
Belleville
Washer #
See Page
Belleville Washer Specs
2-56
4-40
6-32
8-32
10-32
1/4-20
3/8-16
.078
.097
.119
.156
.173
.234
.334
.150
.203
.200
.312
.365
.562
.620
.008
.010
.005
.025
.015
.030
.015
.028
.030
.030
.040
.035
.050
.080
24007
24023
24043
24087 (ID .156)
24105
24165 (ID .234)
24231
227
227
227
228
228
229
229
Spring Steel Screws:
Heat Treated Spring Steel
QQ-S-700/ASTM A 684
!
116
Stainless Steel Screws:
Stainless Steel - Type 301-304
TECH TIP
Most of our fasteners ar e made from
300 series stainless steel which is nonmagnetic and can not be heat tr eated.
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
PAN HEAD CAPTIVE PANEL SCREWS -
Slotted or Phillips
For Captive Panel Screw assemblies, see below and page 1 18.
Slotted Head (PS)
Phillips Head (PP)
Lead Point Option
ORDER EXAMPLE:
114050 - PS - .500 - SS - 12
Length:
L
Material:
See chart
Available Material (see page 275)
Finish:
See page
277
B
S
SS
To add the Lead Point option, add prefix P to part number. EXAMPLE: P1114050-PS-.500-SS-12
Basic
Thread Part
Number
*2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
114050
114052
114054
114056
114059
114058
114051
Height of Head
A
Head Dia
Max Min
B
Slotted
Max Min
.181
.238
.294
.347
.403
.403
.517
.053
.068
.082
.096
.110
.110
.144
.155
.205
.256
.306
.357
.357
.473
B
Recessed Slot Depth
Max Min Max Min
.045 062 .053 .031
.058 080 .070 .040
.072 097 .087 .050
.085 .115 .105 .058
.099 .133 .122 .068
.099 .133 .122 .068
.130 .175 .162 .087
Dimension of Recess
J
C
1
.022
.030
.037
.045
.053
.053
.070
Brass, composition 360
Steel, low carbon 1018 ASTM 108
Stainless Steel, 18-8, 302-304 series
E
T
Slot Width
Max Min
Diameter
Max Min
Depth
Max Min
.031
.039
.048
.054
.060
.060
.075
.104
.122
.166
.182
.199
.199
.281
.059
.078
.091
.108
.124
.124
.161
.023
.031
.039
.045
.050
.050
.064
091
.109
.153
.169
.186
.186
268
N
K
G
L*
PK
Ref.
Only
.017
.019
.028
.030
.031
.031
.036
1/8
5/32
3/16
3/16
1/4
1/4
1/4
.061
.078
.095
.120
.130
.130
.175
.250 - .750
.312 - 1.00
.375 - 1.00
.375 - 1.00
.500 - 1.25
.500 - 1.25
.500 - 3.00
.17
22
26
28
36
36
39
Width ±.010 ±.005
Min
.041
.060
.066
.082
.100
.100
.135
SCREWS
Pan Head
Slotted (PS) or
Pan Head Phillips (PP)
Basic
Part
Number
*Not available with O-ring. For L tolerance, see page 281. Increments of 1/16" is recommended, however , any length may be specif ied.
PAN HEAD CAPTIVE PANEL SCREW ASSEMBLY
Slotted or Phillips
Slotted
Easy One Step Installation Procedure
Phillips
Flare Tool supplied by ASM. Countersink
82° by approximately 1/2 board thickness.
ORDER EXAMPLE:
114050 - PS - .500 - B - SS - 12
Basic
Part
Number
Thread
2-56
4-40
6-32
8-32
10-32
1/4-20
Pan Head
Slotted (PS) or
Pan Head Phillips (PP)
M Dia
Min
.185
.231
.231
.231
.231
.309
Max
.188
.234
.234
.234
.234
.312
Length:
L
Mounting
Hole Dia
+.003 -.000
.188
.234
.234
.234
.234
.312
Shank Code: Material:
See chart
See chart
S
Dia
P
1/4
5/16
3/8
1/2
1/2
9/16
.062
.093
.093
.093
.093
.125
ALSO AVAILABLE AS AN FMR2002 ASSEMBLY
(see pages 110-112 for more information)
Finish:
See page
277
Tooling
Anvil
FA-2
FA-4
FA-6
FA-8
FA-10
FA-25
Punch
FP-2
FP-4
FP-6
FP-8
FP-10
FP-25
Order Example:
114050-PS-.500-U-SS-12
Shank Board
Code Thickness
A
B
C
D
E
F
1/32
1/16
3/32
1/8
3/16
1/4
R1
Available Material
(see page 275)
± .003
.027
.060
.104
.144
.221
.301
B
S
Brass, composition 360
Steel, low carbon 1018
SS
Stainless Steel 18-8,
302-304 series,
ASTMA 580/A580M-98
ASTM 108
NOTE: R =.030 Max.
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
117
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
PAN HEAD CAPTIVE PANEL SCREW ASSEMBLY
Split Lock Washer (G)
See page 157 for details.
Internal Tooth Lock Washer (H)
See page 157 for details.
ORDER EXAMPLE:
114050 - PS - .250 - SS - G - 12
ORDER EXAMPLE:
114050 - PS - .250 - SS - H - 12
Part
Number:
See page 117
Part
Number:
See page 117
Pan Head
Slotted (PS) or
Phillips (PP)
Length:
L
Material:
See page 117
Assembly
w/Split (G)
L’Washer &
Flat Washer
Finish:
See page
277
Pan Head
Slotted (PS) or
Phillips (PP)
SCREWS
External Tooth Lock Washer (J)
See page 157 for details.
Length:
L
Material:
Assembly
Finish:
See page 117 w/Internal (H) See page
L’Washer &
277
Flat Washer
Belleville Washer
see page 116.
Captive Washer Specifications
ORDER EXAMPLE:
114050 - PS - .250 - SS - J - 12
Part
Number:
See page 117
Pan Head
Slotted (PS) or
Phillips (PP)
Length:
L
Material:
Assembly
Finish:
See page 117 w/External (J) See page
L’Washer &
277
Flat Washer
Screw
Size
Outside Dia
± .010
T* ± .005
Thickness
2
4
6
8
10
1/4
.187
.255
.312
.312
.375
.500
.020
.030
.030
.030
.030
.045**
See page 117 for screw dimensions.
MATERIAL CHART
Brass Captive Screw Assembly (B) will be
furnished with silicone bronze split lock
washers conforming to ASTM B99, copper
alloy no. 651 or no. 655. Internal and external
Phosphor Bronze lock washers conforming to
ASM B159, copper alloy no. 510. Brass flat
washers will be no. 260.
Stainless Steel Captive Screw Assembly (SS) will
be furnished with stainless steel flat washers
conforming to AISI type 302 or 305 and lock
washers of stainless steel type 18-8.
Steel Captive Screw Assembly (S) will be
furnished with steel flat washers of low carbon
steel 1006-1010 soft and steel lock washer
conforming to ASTM A366.
PAN HEAD PANEL SCREW ASSEMBLY - FULL THREAD
Split Lock Washer (GF)
See page 157 for details
Internal Tooth Lock Washer (HF)
See page 157 for details
External Tooth Lock Washer (JF)
See page 157 for details
ORDER EXAMPLE:
114050 - PS - .250 - SS - GF - 12
Part
Number:
See page 117
118
Pan Head
Slotted (PS) or
Phillips (PP)
Length:
L
Material:
See page 117
Assembly
w/Split (GF),
Internal (HF) or
External (JF)
* Fully threaded up to
the flat washer.
** Maximum length
1.50 inches.
Finish:
See page
277
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
SELF-SEALING WASHERS
Material: #60 Medium Durameter Neopr ene
For Metric style, see page 147.
Pan Head Full Thread Panel Screw
Pan Head Captive Panel Screw
Slotted or Phillips
Slotted or Phillips
Self-Sealing
Basic Screw
Part
Number
Pan Head
Slotted (PS) or
Phillips (PP)
Length:
L
Material:
See page
117
Finish:
See page
277
Self-Sealing
Basic Screw
Pan Head
Length:
Part
Slotted (PS) or
L
Number
Phillips (PP)
Material:
See page
117
Full
Finish:
Thread See page
277
Any one dimension change, add to part number .
EXAMPLE: S-114050-PS-.500-SS-F-12 (K=3/16)
For L tolerance, see page 281. Increments of 1/16" is recommended, however , any leng h may be specified.
Cost difference is negligible, additional delivery time approximately 1-1/2 weeks.
SCREWS
ORDER EXAMPLE:
S - 114050 - PS - .500 - SS - F - 12
ORDER EXAMPLE:
S - 114050 - PS - .500 - SS - 12
SELF-SEALING ASSEMBLY
Pan Head Captive Panel Scr ew - Slotted or Phillips
For Metric Style, see page 147.
Self-Sealing Washers
Material: #60 Medium Durameter Neoprene
Slotted
ORDER EXAMPLE:
S - 114050 - PS - .500 - B - SS - 12
Self-Sealing
Basic Screw
Part
Number
Pan Head
Slotted (PS) or
Phillips (PP)
Length:
L
Shank Code:
See chart on
page 116
Material:
See page
117
Finish:
See page
277
Any one dimension change add to part number . EXAMPLE: S-114050-PS-.500-B-SS-F-12 (K=3/16)
Phillips
For L tolerance, see page 281. Increments of 1/16" is recommended, however , any length may be
specified. Cost difference is negligible, additional delivery time approximately 1-1/2 weeks.
SELF-SEALING FULL THREAD
Phillips Pan Head with Integral Silicone O-Ring
ORDER EXAMPLE:
SR - 114052 - PP - .250 - SS - 12
Self-Sealing
with Integral
Silicone O-Ring
Basic Screw
Part
Number
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
Pan Head
Phillips (PP)
Length:
L
Material:
See page
117
Finish:
See page
277
119
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
BINDING HEAD CAPTIVE SCREW
Slotted Only
For Binding Head Captive Screw assembly, see pages 121-122. For Retainer W ashers, see page 147.
ALSO AVAILABLE AS AN
FMR2002 ASSEMBLY
(see pages 110-112 for more information)
Slotted
Head
Ordering
Code: BS
Order Example:
Slotted Head (BS)
114060-BS-.500-U-SS-12
Lead Point Option
SCREWS
ORDER EXAMPLE:
114060 - BS - .500 - SS - 12
Basic
Part
Number
Binding
Head
Slotted (BS)
Length:
L
Material:
See chart
Finish:
See page
277
To add the Lead Point Option, add prefix P to part number.
EXAMPLE: P114060-BS-.500-SS-12
Thread
Basic
Part
Number
A
Head Dia
Min
Max
B
Head Height
Min
Max
C Head
Oval Height
Min
Max
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
114060
114062
114064
114066
114069
114068
114061
.181
.235
.290
.344
.399
.399
.525
.050
.068
.087
.105
.123
.123
.165
.018
.025
.032
.039
.045
.045
.061
.171
.223
.275
.326
.378
.378
.498
.043
.061
.078
.095
.112
.112
.152
.013
.018
.024
.029
.034
.034
.046
Available Material (see page 275)
B
composition 360
S
Steel,
SS
Stainless Steel,
D
Slot Depth
Min
Max
.030
.042
.053
.065
.077
.077
.105
Brass,
.020
.030
.040
.050
.060
.060
.084
low carbon 1018 ASTM 108
J
Slot Width
Min
Max
.031
.039
.048
.054
.060
.060
.075
18-8, 302-304 series
G
K
± .010 ± .005
.023
.031
.039
.045
.050
.050
.064
1/8
5/32
3/16
3/16
1/4
1/4
1/4
.061
.078
.095
.120
.130
.130
.175
L*
PK
Ref.
Only
.250 - .750
.312 - 1.00
.375 - 1.00
.375 - 1.00
.500 - 1.25
.500 - 1.25
.500 - 3.00
.17
.22
.26
.28
.36
.36
.39
*For L tolerance, see page 281. Increments of 1/16" is recommended, however , any length may be specified. Cost dif ference is negligible, addi ional delivery time
approximately 1-1/2 weeks.
BINDING HEAD PANEL SCREW ASSEMBLY - FULL THREAD
Split Lock Washer (GF)
See page 157 for details.
Internal Tooth Lock Washer (HF)
See page 157 for details.
External Tooth Lock Washer (JF)
See page 157 for details.
ORDER EXAMPLE:
114060 - BS - .500 - SS - GF - 12
Part
Number:
See page 120
120
Binding Head
Slotted (BS)
Length:
L
Material:
See page 120
Assembly
w/Split (GF),
Internal (HF) or
External (JF)
Finish:
See page
277
See page 157 for details
on split, internal and
external tooth washers.
* Fully threaded up to the
flat washer.
** Maximum length 1.50
inches.
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
BINDING HEAD CAPTIVE PANEL SCREW ASSEMBLY
Internal Tooth Lock Washer (H)
See page 157 for details.
Split Lock Washer (G)
See page 157 for details.
ORDER EXAMPLE:
114060 - BS - .500 - SS - G - 12
ORDER EXAMPLE:
114060 - BS - .500 - SS - H - 12
Part
Number:
See page 120
Part
Number:
See page 120
Length:
L
Material:
See page
120
Finish:
Assembly
w/Split (G) See page
277
L’Washer &
Flat Washer
External Tooth Lock Washer (J)
See page 157 for details.
Binding Head
Slotted (BS)
Length:
L
Material:
See page
120
Finish:
Assembly
w/Internal (H) See page
277
L’Washer &
Flat Washer
SCREWS
Binding Head
Slotted (BS)
Belleville Washer
see page 116.
Captive Washer Specifications
ORDER EXAMPLE:
114060 - BS - .500 - SS - J - 12
Part
Number:
See page 120
Binding Head
Slotted (BS)
Length:
L
Material:
See page
120
Finish:
Assembly
w/External (J) See page
277
L’Washer &
Flat Washer
Screw
Size
Outside Dia
± .010
T* ± .005
Thickness
2
4
6
8
10
1/4
.187
.255
.312
.375
.500
.562
.020
.030
.030
.030
.030
.045**
See page 120 for screw dimensions.
Available Material (see page 275)
B
S
SS
Brass, composition 360
Steel, low carbon 1018 ASTM 108
Stainless Steel 18-8, 302-304 series
BINDING HEAD PANEL SCREW ASSEMBLY - FULL THREAD
Split Lock Washer (GF)
See page 157 for details.
Internal Tooth Lock Washer (HF)
See page 157 for details.
External Tooth Lock Washer (JF)
See page 157 for details.
ORDER EXAMPLE:
114060 - BS - .500 - SS - GF - 12
Part
Number:
See page 120
Binding Head
Slotted (BS)
Length:
L
Material:
See page 120
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
Assembly
w/Split (GF),
Internal (HF) or
External (JF)
Finish:
See page
277
See page 157 for details
on split, internal and
external tooth washers.
* Fully threaded up to the
flat washer.
** Maximum length 1.50
inches.
121
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
BINDING HEAD CAPTIVE PANEL SCREW ASSEMBLY
Slotted Only
For split lock washers, see page 157.
See Below
Easy One Step Installation Procedure
SCREWS
Flare Tool supplied by ASM countersink 82°
by approximately 1/2 board thickness.
ORDER EXAMPLE:
114060 - BS - .500 - B - SS - 12
Binding Head
Slotted (BS)
Basic
Part
Number
Thread
Basic
Part
Number
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
114060
114062
114064
114066
114069
114068
114061
A
Head Dia
Max
Min
.181
.235
.290
.344
.399
.399
.525
.171
.223
.275
.326
.378
.378
.498
Shank Code: Material:
See chart
See chart
Length:
L
B
Head Height
Max
Min
.050
.068
.087
.105
.123
.123
.165
.043
.061
.078
.095
.112
.112
.152
C Head
Oval Height
Max
Min
.018
.025
.032
.039
.045
.045
.061
.013
.018
.024
.029
.034
.034
.046
Available Material (see page 275)
B
S
SS
Finish:
See page
277
D
Slot Depth
Max
Min
.030
.042
.053
.065
.077
.077
.105
.020
.030
.040
.050
.060
.060
.084
Brass, composition 360
Steel, low carbon 1018 ASTM 108
Stainless Steel 18-8, 302-304 series
J
Slot Width
Max
Min
.031
.039
.048
.054
.060
.060
.075
.023
.031
.039
.045
.050
.050
.064
K
G
± .010 ± .005
1/8
5/32
3/16
3/16
1/4
1/4
1/4
.061
.078
.095
.120
.130
.130
.175
L*
Length
.250 - .750
.312 - 1.00
.375 - 1.00
.375 - 1.00
.500 - 1.25
.500 - 1.25
.500 - 3.00
*For L tolerance, see page 281. Increments of 1/16" is recommended, however , any length may be specified.
Retainer and Flare Tooling Data
Thread
2-56
4-40
6-32
8-32
10-32
1/4-20
M Dia
Min
Max
.185
.231
.231
.231
.231
.309
.188
.234
.234
.234
.234
.312
Mounting
Hole Dia
+.003 -.000
.188
.234
.234
.234
.234
.312
!
122
S
Dia
P
1/4
5/16
3/8
1/2
1/2
9/16
.062
.093
.093
.093
.093
.125
Tooling
Anvil
FA-2
FA-4
FA-6
FA-8
FA-10
FA-25
Punch
FP-2
FP-4
FP-6
FP-8
FP-10
FP-25
R1
Shank
Code
Board
Thickness
± .003
A
B
C
D
E
F
1/32
1/16
3/32
1/8
3/16
1/4
.027
.060
.104
.144
.221
.301
TECH TIP
Metric sizes and threads
available on many different
products we manufacture.
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
FILLISTER HEAD CAPTIVE SCREW
Slotted or Phillips
For Fillister Head Captive Screw assembly, see page 124-125. For Retainer W ashers, see page 147.
Slotted (with hole)
B
Brass,
S
Steel,
SS
Stainless Steel,
TECH TIP
!
Available Material (see page 275)
composition 360
low carbon 1018 ASTM 108
18-8, 302-304 series
Metric sizes and threads are available on
many of the products we manufacture.
ORDER EXAMPLE:
114070 - FS - .500 - SS - 12
Basic
Part
Number
Fillister Head
Slotted (FS) or
Phillips (FP)
Length:
L
To add a drilled hole, prefix H to part number.
EXAMPLE: H114070-FS-.500-SS-12
Material:
See chart
ALSO AVAILABLE AS AN FMR2002 ASSEMBLY
(see pages 110-112 for more information)
Finish:
See page
277
To add the Lead Point Option,
prefix P to part number.
EXAMPLE: P114070-FS-.500-SS-12
Order Example:
114070-FS-.500-U-SS-12
Height of Head
Thread
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
A
Head Dia
Dimensions of Recess
B
C
Total Height Side Height
J
Slot Width
T
Slot Depth
M
Dia
D
Depth
E
Width
Basic
Part
Number Max
Min
Max
Min
Max
Min
Max
Min
Max
Min
Max
Min
Max
Min
Min
114070
114072
114074
114076
114079
114078
114071
.124
.166
.208
.250
.292
.292
.389
.083
.107
.132
.156
.180
.180
.237
.066
.088
.111
.133
.156
.156
.207
.062
.079
.096
.113
.130
.130
.170
.053
.069
.086
.102
.118
.118
.155
.031
.039
.048
.054
.060
.060
.075
.023
.031
.039
.045
.050
.050
.064
.037
.048
.060
.071
.083
.083
.109
.025
.035
.045
.054
.064
.064
.082
-.122
.166
.182
.199
.199
.281
-.109
.153
.169
.186
.186
.268
.059
.078
.091
.108
.124
.124
.161
.041
.060
.066
.082
.100
.100
.135
.017
.019
.028
.030
.031
.031
.036
.140
.183
.226
.270
.313
.313
.414
Lead Point Option
Phillips Head (FP)
SCREWS
Slotted Head (FS)
K
G
H
F
± .010
± .005
Nom.
Nom.
1/8
5/32
3/16
3/16
1/4
1/4
1/4
.061
.078
.095
.120
.130
.130
.175
.031
.037
.046
.046
.046
.046
.062
.026
.035
.043
.043
.043
.043
.062
L*
PK
Ref.
Only
.250 to .750
.312 to 1.00
.375 to 1.00
.500 to 1.00
.500 to 1.25
.500 to 1.25
.500 to 3.00
.17
.22
.26
.28
.36
.36
.39
*For L tolerance, see page 281. Increments of 1/16" is recommended, however , any length may be specified. Cost dif ference is negligible, addi ional delivery time
approximately 1-1/2 weeks.
FILLISTER HEAD SCREW ASSEMBLY - FULL THREAD
Split Lock Washer (GF)
See page 157 for details.
Internal Tooth Lock Washer (HF)
See page 157 for details.
External Tooth Lock Washer (JF)
See page 157 for details.
ORDER EXAMPLE:
114070 - FS - .500 - SS - GF - 12
Part
Number:
See page 123
Fillister Head
Slotted (FS)
Length:
L
Material:
See page 123
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
Assembly
w/Split (GF),
Internal (HF) or
External (JF)
Finish:
See page
277
* Fully threaded up
to the flat washer.
** Maximum length
1.50 inches.
123
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
FILLISTER HEAD CAPTIVE SCREW ASSEMBLY
Internal Tooth Lock Washer (H)
See page 157 for details.
Split Lock Washer (G)
See page 157 for details.
ORDER EXAMPLE:
114070 - FS - .500 - SS - G - 12
Part
Number:
See page 123
Fillister Head
Slotted (FS) or
Phillips (FP)
Length:
L
Material:
See page
123
ORDER EXAMPLE:
114070 - FS - .500 - SS - H - 12
Assembly
Finish:
w/Split (G) See page
L’Washer &
277
Flat Washer
Part
Fillister Head
Number:
Slotted (FS) or
See page 123 Phillips (FP)
SCREWS
External Tooth Lock Washer (J)
See page 157 for details.
Length:
L
Material:
See page
123
Assembly
Finish:
w/Internal (H) See page
L’Washer &
277
Flat Washer
Belleville Washer
see page 116.
Captive Washer Specifications
ORDER EXAMPLE:
114070 - FS - .500 - SS - J - 12
Part
Fillister Head
Number:
Slotted (FS) or
See page 123 Phillips (FP)
Length:
L
Material:
See page
123
Assembly
Finish:
w/External (J) See page
L’Washer &
277
Flat Washer
Screw
Size
Outside Dia
± .010
2
4
6
8
10
1/4
.187
.255
.312
.312
.375
.500
T* ± .005
Thickness
.020
.030
.030
.030
.030
.045**
See page 123 for screw dimensions.
Available Material (see page 275)
B
S
SS
Brass, composition 360
Steel, low carbon 1018 ASTM 108
Stainless Steel 18-8, 302-304 series
FILLISTER HEAD SCREW ASSEMBLY - FULL THREAD
Split Lock Washer (GF)
See page 157 for details.
Internal Tooth Lock Washer (HF)
See page 157 for details.
External Tooth Lock Washer (JF)
See page 157 for details.
ORDER EXAMPLE:
114070 - FS - .500 - SS - GF - 12
Part
Number:
See page 123
124
Fillister Head
Slotted (FS)
Length:
L
Material:
See page 123
Assembly
w/Split (GF),
Internal (HF) or
External (JF)
Finish:
See page
277
* Fully threaded up
to the flat washer.
** Maximum length
1.50 inches.
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
FILLISTER HEAD CAPTIVE PANEL SCREW ASSEMBLY
Slotted or Phillips
Slotted
Phillips
See page
157 for details.
Easy One Step Installation Procedure
ORDER EXAMPLE:
114070 - FS - .500 - B - SS - 12
Fillister Head
Slotted (FS) or
Phillips (FP)
Basic
Part
Number
Length:
L
Shank Code: Material:
See chart
See chart
Available Material (see page 275)
B
S
SS
Finish:
See page
277
Height of Head
Thread
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
A
Head Dia
B
Total Height
Brass, composition 360
Steel, low carbon 1018 ASTM 108
Stainless Steel 18-8, 302-304 series
SCREWS
Flare Tool Supplied by ASM. Countersink 82°
by approximately 1/2 board thickness.
Dimensions of Recess
C
Side Height
J
Slot Width
T
Slot Depth
M
Dia
D
Depth
E
Width
Basic
Part
Number
Max
Min
Max
Min
Max
Min
Max
Min
Max
Min
Max
Min
Max
Min
Min
114070
114072
114074
114076
114079
114078
114071
.140
.183
.226
.270
.313
.313
.414
.124
.166
.208
.250
.292
.292
.389
.083
.107
.132
.156
.180
.180
.237
.066
.088
.111
.133
.156
.156
.207
.062
.079
.096
.113
.130
.130
.170
.053
.069
.086
.102
.118
.118
.155
.031
.039
.048
.054
.060
.060
.075
.023
.031
.039
.045
.050
.050
.064
.037
.048
.060
.071
.083
.083
.109
.025
.035
.045
.054
.064
.064
.082
-.122
.166
.182
.199
.199
.281
-.109
.153
.169
.186
.186
.268
.059
.078
.091
.108
.124
.124
.161
.041
.060
.066
.082
.100
.100
.135
.017
.019
.028
.030
.031
.031
.036
K
G
± .010
± .005
1/8
5/32
3/16
3/16
1/4
1/4
1/4
.061
.078
.095
.120
.130
.130
.175
L*
.250 to .750
.312 to 1.00
.375 to 1.00
.500 to 1.00
.500 to 1.25
.500 to 1.25
.500 to 3.00
*For L tolerance, see page 281. Increments of 1/16" is recommended, however , any length may be specified. Cost dif ference is negligible, addi ional delivery time
approximately 1-1/2 weeks.
Retainer and Flare Tooling Data
Thread
2-56
4-40
6-32
8-32
10-32
1/4-20
M Dia
Min
Max
.185
.231
.231
.231
.231
.309
.188
.234
.234
.234
.234
.312
Mounting
Hole Dia
+.003 -.000
.188
.234
.234
.234
.234
.312
S
Dia.
P
1/4
5/16
3/8
1/2
1/2
9/16
.062
.093
.093
.093
.093
.125
Tooling
Anvil
FA-2
FA-4
FA-6
FA-8
FA-10
FA-25
Punch
FP-2
FP-4
FP-6
FP-8
FP-10
FP-25
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
R1
Shank
Code
Board
Thickness
± .003
A
B
C
D
E
F
1/32
1/16
3/32
1/8
3/16
1/4
.027
.060
.104
.144
.221
.301
125
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
ROUND HEAD CAPTIVE SCREW
Slotted or Phillips
For Round Head Captive Screw assembly, see pages 127-128. For Retainer W ashers, see page 147.
Slotted Head (RS)
Phillips Head (RP)
Lead Point Option
Available Material (see page 275)
SCREWS
B
Brass,
S
Steel,
SS
Stainless Steel,
composition 360
low carbon 1018 ASTM 108
18-8, 302-304 series
ORDER EXAMPLE:
114080 - RS - .500 - SS - 12
Basic
Part
Number
Round Head
Slotted (RS) or
Phillips (RP)
Length:
L
Material:
See chart
ALSO AVAILABLE AS AN FMR2002 ASSEMBLY
(see pages 110-112 for more information)
Finish:
See page
277
Order Example:
To add the Lead Point option, prefix P to part number.
EXAMPLE: P114080-RS-.500-SS-12
114080-RS-.500-U-SS-12
Thread
Basic
Part
Number
A
Head Dia
Max Min
B
Head Hght
Max Min
J
Slot Width
Max Min
C
Slot Depth
Max Min
Dimension of Recess
D
E
B1
Depth
Width
Diameter
Max Min Max Min Max
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
114080
114082
114084
114086
114089
114088
114081
.162
.211
.260
.309
.359
.359
.472
.069
.086
.103
.120
.137
.137
.175
.031
.039
.048
.054
.060
.060
.075
.048
.058
.068
.077
.087
.087
.109
.100
.118
.162
.178
.195
.195
.268
.146
.193
.240
.287
.334
.334
.443
.059
.075
.091
.107
.123
.123
.160
.023
.031
.039
.045
.050
.050
.064
.037
.044
.051
.058
.065
.065
.082
.087
.105
.149
.165
.182
.182
.255
.053
.072
.084
.101
.119
.119
.147
.034
.053
.056
.075
.093
.093
.121
.017
.019
.027
.030
.031
.031
.034
K
G
± .010
± .005
1/8
5/32
3/16
3/16
1/4
1/4
1/4
.061
.078
.095
.120
.130
.130
.175
L*
.250 to .75
.312 to 1.00
.375 to 1.00
.375 to 1.00
.500 to 1.25
.500 to 1.25
.500 to 3.00
PK
Ref.
Only
.17
.22
.26
.28
.36
.36
.39
*For L tolerance, see page 281. Increments of 1/16" is recommended, however , any length may be specified. Cost dif ference is negligible, addi ional delivery time
approximately 1-1/2 weeks.
ROUND HEAD PANEL SCREW ASSEMBLY - FULL THREAD
Split Lock Washer (GF)
See page 157 for details.
Internal Tooth Lock Washer (HF)
See page 157 for details.
External Tooth Lock Washer (JF)
See page 157 for details.
ORDER EXAMPLE:
114080 - RS - .500 - SS - GF - 12
Part
Number:
See page 126
126
Round Head
Slotted (RS)
Length:
L
Material:
See page 126
Assembly
w/Split (GF),
Internal (HF) or
External (JF)
* Fully threaded up to
the flat washer.
** Maximum length
1.50 inches.
Finish:
See page
277
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
ROUND HEAD CAPTIVE PANEL SCREW ASSEMBLY
Internal Tooth Lock Washer (H)
See page 157 for details.
Split Lock Washer (G)
See page 157 for details.
ORDER EXAMPLE:
114080 - RS - .500 - SS - G - 12
Round Head
Slotted (RS) or
Phillips (RP)
Length:
L
Material:
See page
126
Assembly
Finish:
w/Split (G) See page
L’Washer &
277
Flat Washer
Part
Round Head
Number:
Slotted (RS) or
See page 126 Phillips (RP)
External Tooth Lock Washer (J)
See page 157 for details.
Length:
L
Material:
See page
126
Assembly
Finish:
w/Internal (H) See page
L’Washer &
277
Flat Washer
SCREWS
Part
Number:
See page 126
ORDER EXAMPLE:
114080 - RS - .500 - SS - H - 12
Belleville Washer
see page 116.
Captive Washer Specifications
ORDER EXAMPLE:
114080 - RS - .500 - SS - J - 12
Part
Round Head
Number:
Slotted (RS) or
See page 126 Phillips (RP)
Length:
L
Material:
See page
126
Assembly
Finish:
w/External (J) See page
L’Washer &
277
Flat Washer
Screw
Size
Outside Dia
± .010
2
4
6
8
10
1/4
.250
.312
.312
.500
.500
.562
T* ± .005
Thickness
.020
.030
.030
.030
.030
.045**
See page 126 for screw dimensions.
Available Material (see page 275)
B
S
SS
Brass, composition 360
Steel, low carbon 1018 ASTM 108
Stainless Steel 18-8, 302-304 series
ROUND HEAD PANEL SCREW ASSEMBLY - FULL THREAD
Split Lock Washer (GF)
See page 157 for details.
Internal Tooth Lock Washer (HF)
See page 157 for details.
External Tooth Lock Washer (JF)
See page 157 for details.
ORDER EXAMPLE:
114080 - RS - .500 - SS - GF - 12
Part
Number:
See page 126
Round Head
Slotted (RS)
Length:
L
Material:
See page 126
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
Assembly
w/Split (GF),
Internal (HF) or
External (JF)
* Fully threaded up to
the flat washer.
** Maximum length
1.50 inches.
Finish:
See page
277
127
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
ROUND HEAD CAPTIVE PANEL SCREW ASSEMBLY
Slotted or Phillips
For Split Lock Washers, see page 157.
SLOTTED
PHILLIPS
Easy One Step Installation Procedure
Flare Tool Supplied by ASM. Countersink 82°
by approximately 1/2 board thickness.
SCREWS
ORDER EXAMPLE:
114080 - RS - .500 - B - SS - 12
Round Head
Slotted (RS) or
Phillips (RP)
Basic
Part
Number
Thread
Basic
Part
Number
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
114080
114082
114084
114086
114089
114088
114081
A
Head Dia
Length:
L
B
Head Height
Shank Code: Material:
See chart
See chart
J
Slot Width
Available Material (see page 275)
B
S
SS
Finish:
See page
277
Brass, composition 360
Steel, low carbon 1018 ASTM 108
Stainless Steel 18-8, 302-304 series
Dimension of Recess
E
B1
D
Diameter
Depth
Width
C
Slot Depth
Max
Min
Max
Min
Max
Min
Max
Min
Max
Min
Max
Min
Min
.162
.211
.260
.309
.359
.359
.472
.146
.193
.240
.287
.334
.334
.443
.069
.086
.103
.120
.137
.137
.175
.059
.075
.091
.107
.123
.123
.160
.031
.039
.048
.054
.060
.060
.075
.023
.031
.039
.045
.050
.050
.064
.048
.058
.068
.077
.087
.087
.109
.037
.044
.051
.058
.065
.065
.082
.100
.118
.162
.178
.195
.195
.268
.087
.105
.149
.165
.182
.182
.255
.053
.072
.084
.101
.119
.119
.147
.034
.053
.056
.075
.093
.093
.121
.017
.019
.027
.030
.031
.031
.034
K
G
± .010
± .005
1/8
5/32
3/16
3/16
1/4
1/4
1/4
.061
.078
.095
.120
.130
.130
.175
L*
.250 to .75
.312 to 1.00
.375 to 1.00
.375 to 1.00
.500 to 1.25
.500 to 1.25
.500 to 3.00
*For L tolerance, see page 281. Increments of 1/16" is recommended, however , any length may be specified. Cost dif ference is negligible, addi ional delivery time
approximately 1-1/2 weeks.
Retainer and Flare Tooling Data
Thread
2-56
4-40
6-32
8-32
10-32
1/4-20
M Dia
Min
Max
.185
.231
.231
.231
.231
.309
.188
.234
.234
.234
.234
.312
!
128
Mounting
Hole Dia
+.003 -.000
.188
.234
.234
.234
.234
.312
S
Dia
P
1/4
5/16
3/8
1/2
1/2
9/16
.062
.093
.093
.093
.093
.125
Tooling
Anvil
FA-2
FA-4
FA-6
FA-8
FA-10
FA-25
Punch
FP-2
FP-4
FP-6
FP-8
FP-10
FP-25
R1
Shank
Code
Board
Thickness
± .003
A
B
C
D
E
F
1/32
1/16
3/32
1/8
3/16
1/4
.027
.060
.104
.144
.221
.301
TECH TIP
Remember when installing flare type
standoffs and retainers to use 82º c’sink
approximately 1/2 the thickness of the boar d.
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
CAPTIVE SOCKET HEAD CAP SCREWS
1960 Series
For Captive Socket Head Cap Screw assembly, see page 130-131. ALSO AVAILABLE AS AN
FMR2002 ASSEMBLY
Lead Point Option
(see pages 110-112
for more information)
Order Example:
See page 283 for Hex size.
114112-.500-U-SS-12
Length:
L
Material:
See chart
Finish:
See page 277
To add the Lead Point option, prefix P to part number.
EXAMPLE: P114112-.500-SS-12
To order Slotted Hex Head, add SDS to part number .
EXAMPLE: 114112-.500-SS-SDS-12
Basic
Part
Number
Thread
114112
114114
114116
114118
114127
114120
114121
114111
114113
114115
114117
114119
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
1/4-28
5/16-18
3/8-16
7/16-14
1/2-13
All socket cap screws are class 3A
threads unless other specified.
Available Material (see page 275)
S
SS
D
Steel, ASTM-A-108-93 (12L14) QQ-S-637
Stainless Steel, 18-8, 302-304 series
L*
H
Max
Min
Max
Min
.140
.183
.226
.270
.312
.312
.375
.375
.469
.562
.656
.750
.134
.176
.218
.262
.303
.303
.365
.365
.457
.550
.642
.735
.086
.112
.138
.164
.190
.190
.250
.250
.312
.375
.438
.500
.083
.108
.134
.159
.185
.185
.244
.244
.306
.368
.430
.492
SCREWS
Basic
Part
Number
TECH TIP
!
ORDER EXAMPLE:
114112 - .500 - SS - 12
.250 - 1.00
.250 - 1.00
.375 - 1.25
.375 - 1.25
.500 - 1.50
.500 - 1.50
.500 - 3.00
.375 - 3.00
.500 - 3.50
.500 - 5.00
.750 - 4.00
.750 - 8.00
K
± .010
B
± .005
PK
Ref.
Only
1/8
5/32
3/16
3/16
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
.061
.078
.095
.120
.130
.130
.175
.175
.230
.280
.344
.400
.17
.22
.26
.28
.36
.36
.39
.39
.55
.59
.62
.66
*For L tolerance, see page 281. Increments of 1/16" is recommended, however , any length may be specified. Cost dif ference is negligible, addi ional delivery time
approximately 1-1/2 weeks.
SOCKET HEAD CAP SCREW ASSEMBLY - FULL THREAD
Split Lock Washer (GF)
See page 157 for details.
Internal Tooth Lock Washer (HF)
See page 157 for details.
External Tooth Lock Washer (JF)
See page 157 for details.
ORDER EXAMPLE:
114112 - .500 - SS - GF - 12
Part
Number:
See page 129
Length:
L
Material:
See page
129
Assembly
w/Split (GF),
Internal (HF) or
External (JF)
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
* Fully threaded up to the flat
washer.
** Maximum length 1.50 inches.
Finish:
See page
277
129
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
CAPTIVE SOCKET HEAD CAP SCREW ASSEMBLY
Internal Tooth Lock Washer (H)
See page 157 for details.
Split Lock Washer (G)
See page 157 for details.
ORDER EXAMPLE:
114112 - .500 - SS - G - 12
Part
Number:
See page 129
Length:
L
Material:
See page
129
Assembly
w/Split (G)
L’Washer &
Flat Washer
Finish:
See page
277
ORDER EXAMPLE:
114112 - .500 - SS - H - 12
Part
Number:
See page 129
SCREWS
External Tooth Lock Washer (J)
See page 157 for details.
Length:
L
Material:
See page
129
Assembly
Finish:
w/Internal (H) See page
L’Washer &
277
Flat Washer
Belleville Washer
see page 116.
Captive Washer Specifications
ORDER EXAMPLE:
114112 - .500 - SS - J - 12
Part
Number:
See page 129
Length:
L
Material:
See page
129
Assembly
Finish:
w/External (J) See page
L’Washer &
277
Flat Washer
Screw
Size
Outside Dia
± .010
2
4
6
8
10
1/4
5/16
.187
.255
.312
.312
.375
.500
.625
T* ± .005
Thickness
.020
.030
.030
.030
.030
.045**
.085
See page 129 for screw dimensions.
SOCKET HEAD CAP SCREW ASSEMBLY - FULL THREAD
Split Lock Washer (GF)
See page 157 for details.
Internal Tooth Lock Washer (HF)
See page 157 for details.
External Tooth Lock Washer (JF)
See page 157 for details.
ORDER EXAMPLE:
114112 - .500 - SS - GF - 12
Part
Number:
See page 129
130
Length:
L
Material:
See page
129
Assembly
w/Split (GF),
Internal (HF) or
External (JF)
* Fully threaded up to the flat
washer.
** Maximum length 1.50 inches.
Finish:
See page
277
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
SOCKET HEAD CAP SCREW
CAPTIVE PANEL SCREW ASSEMBLY
See page 157 for Split Lock W asher.
(see below)
Easy One Step Installation Procedure
ORDER EXAMPLE:
114112 - .500 - B - SS - 12
Basic
Part
Number
Length:
L
Basic
Part
Number
Thread
114112
114114
114116
114118
114127
114120
114121
114111
114113
114115
114117
114119
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
1/4-28
5/16-18
3/8-16
7/16-14
1/2-13
Material:
See chart
Shank Code:
See chart
SCREWS
Flare Tool supplied by ASM.
Countersink 82° by approximately
1/2 board thickness.
Available Material (see page 275)
Finish:
See page
277
S
SS
D
Steel, ASTM-A-108-93 (12L14) QQ-S-637
Stainless Steel, 18-8, 302-304 series
L*
H
Max
Min
Max
Min
.140
.183
.226
.270
.312
.312
.375
.375
.469
.562
.656
.750
.134
.176
.218
.262
.303
.303
.365
.365
.457
.550
.642
.735
.086
.112
.138
.164
.190
.190
.250
.250
.312
.375
.438
.500
.083
.108
.134
.159
.185
.185
.244
.244
.306
.368
.430
.492
.250-0.625
.250-0.625
.375-1.25
.375-1.25
.500-1.50
.500-1.50
.500-3.00
.375-3.00
.500-3.50
.500-5.00
.750- 4.00
.750-8.00
K
± .010
B
± .005
1/8
5/32
3/16
3/16
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
.061
.078
.095
.120
.130
.130
.175
.175
.230
.280
.344
.400
*For L tolerance, see page 281. Increments of 1/16" is recommended, however , any length may be specified. Cost dif ference is negligible, addi ional delivery time
approximately 1-1/2 weeks.
Retainer and Flare Tooling Data
Thread
2-56
4-40
6-32
8-32
10-32
1/4-20
M Dia
Min
.185
.231
.231
.231
.231
.309
Max
.188
.234
.234
.234
.234
.312
Mounting
Hole Dia
+.003 -.000
.188
.234
.234
.234
.234
.312
S
Dia
P
1/4
5/16
3/8
1/2
1/2
9/16
.062
.093
.093
.093
.093
.125
Tooling
Anvil
Punch
FA-2
FA-4
FA-6S
FA-8S
FA-10S
FA-25S
FP-2
FP-4
FP-6S
FP-8S
FP-10S
FP-25S
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
R1
Shank
Code
Board
Thickness
± .003
A
B
C
D
E
F
1/32
1/16
3/32
1/8
3/16
1/4
.027
.060
.104
.144
.221
.301
131
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
HEX HEAD CAPTIVE MACHINE SCREW
For Hex Captive Machine Screw assembly, see pages 133-134. For Retainer W ashers, see page 147.
ALSO AVAILABLE AS AN
FMR2002 ASSEMBLY
Lead Point Option
(see pages 110-112
for more information)
Order Example:
114102-.500-U-SS-12
ORDER EXAMPLE:
114102 - .500 - SS - 12
SCREWS
Basic
Part
Number
Length:
See chart
or fill in length
Material:
See chart
Lead Point Option
Thread
114102
114104
114106
114108
114107
114110
114109
114103
114105
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
5/16-18
3/8-16
Available Material (see page 275)
To order SLOTTED Hex Head, add
SDS to part number.
EXAMPLE: 114104-.500-SS-SDS-12
To add the Lead Point, add he
prefix P to part number.
EXAMPLE: P114104-.500-SS-12
Basic
Part
Number
Finish:
See page 277
S
SS
Slotted Hex Head
D
H
Max
Min
Max
Min
.125
.188
.250
.250
.312
.312
.438
.500
.562
.120
.181
.244
.244
.305
.305
.428
.489
.551
.050
.060
.093
.110
.120
.120
.163
.211
.243
.040
.049
.080
.096
.105
.105
.150
.195
.226
Steel, low carbon 1018 ASTM 108
Stainless Steel, 18-8, 302-304 series
L*
C
.250-.625
.250-.625
.375-1.25
.500-1.25
.500-1.25
.500-1.25
.625-1.25
.625-1.25
.625-1.50
Min
.134
.202
.272
.272
.340
.340
.488
.557
.628
K
± .010
B
± .005
PK
Ref.
Only
1/8
5/32
3/16
3/16
1/4
1/4
1/4
1/4
3/8
.061
.078
.095
.120
.130
.130
.175
.230
.280
.17
.22
.26
.28
.36
.36
.39
.43
.59
*For L tolerance, see page 281. Increments of 1/16" is recommended, however , any length may be specified. Cost dif ference is negligible, addi ional delivery time
approximately 1-1/2 weeks.
!
132
TECH TIP
Downloadable 3D CAD models available in the
following formats: DXF, Pro/E, IGES and STEP
at www.accuratescrew.com.
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
HEX HEAD CAPTIVE MACHINE SCREW ASSEMBLY
Split Lock Washer (G)
See page 157 for details.
Internal Tooth Lock Washer (H)
See page 157 for details.
Part
Number:
See page 132
Length:
L
Material:
See page
132
Assembly
w/Split (G)
L’Washer &
Flat Washer
Finish:
See page
277
ORDER EXAMPLE:
114102 - .500 - SS - H - 12
Part
Number:
See page 132
Length:
L
External Tooth Lock Washer (J)
See page 157 for details.
Material:
See page
132
Assembly
Finish:
w/Internal (H) See page
L’Washer &
277
Flat Washer
SCREWS
ORDER EXAMPLE:
114102 - .500 - SS - G - 12
Belleville Washer
see page 116.
Captive Washer Specifications
ORDER EXAMPLE:
114102 - .500 - SS - J - 12
Part
Number:
See page 132
Length:
L
Material:
See page
132
Assembly
Finish:
w/External (J) See page
L’Washer &
277
Flat Washer
Screw
Size
Outside Dia
± .010
2
4
6
8
10
1/4
5/16
.187
.255
.312
.312
.375
.500
.625
T ± .005
Thickness
.020
.030
.030
.030
.030
.045**
.085
See page 132 for screw dimensions.
HEX HEAD MACHINE SCREW ASSEMBLY - FULL THREAD
Split Lock Washer (GF)
See page 157 for details.
Internal Tooth Lock Washer (HF)
See page 157 for details.
External Tooth Lock Washer (JF)
See page 157 for details.
ORDER EXAMPLE:
114102 - .500 - SS - GF - 12
Part
Number:
See page 132
Length:
L
Material:
See page
132
Assembly
w/Split (GF),
Internal (HF) or
External (JF)
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
Finish:
See page
277
* Fully threaded up to the
flat washer.
** Maximum length 1.50
inches.
133
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
HEX HEAD MACHINE SCREW
CAPTIVE PANEL SCREW ASSEMBLY
See page 157 for Split Lock W asher.
(see below)
Easy One Step Installation Procedure
SCREWS
Flare Tool Supplied by ASM.
Countersink 82° by approximately
1/2 board thickness.
ORDER EXAMPLE:
114102 - .500 - B - SS - 12
Basic
Part
Number
Length:
L
Basic
Part
Number
Thread
114102
114104
114106
114108
114107
114110
114109
114105
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
3/8-16
Material:
See chart
Shank Code:
See chart
Available Material (see page 275)
Finish:
See page
277
D
S
SS
Steel, low carbon 1018 ASTM 108
Stainless Steel, 18-8, 302-304 series
L*
C
.375-.750
.375-1.00
.500-1.00
.500-1.00
.750-1.25
.750-1.25
.750-3.00
.625-1.50
Min
.134
.202
.272
.272
.340
.340
.488
.628
H
Max
Min
Max
Min
.125
.188
.250
.250
.312
.312
.438
.562
.120
.181
.244
.244
.305
.305
.428
.551
.050
.060
.093
.110
.120
.120
.163
.243
.040
.049
.080
.096
.105
.105
.150
.226
TL
± .010
B
± .005
1/8
5/32
3/16
3/16
1/4
1/4
1/4
3/8
.061
.078
.095
.120
.130
.130
.175
.280
*For L tolerance, see page 281. Increments of 1/16" is recommended, however , any length may be specified. Cost dif ference is negligible, addi ional delivery time
approximately 1-1/2 weeks.
Retainer and Flare Tooling Data
Thread
2-56
4-40
6-32
8-32
10-32
1/4-20
134
M Dia
Min
.185
.231
.231
.231
.231
.309
Max
.188
.234
.234
.234
.234
.312
Mounting
Hole Dia
+.003 -.000
.188
.234
.234
.234
.234
.312
S
Dia
1/4
5/16
3/8
1/2
1/2
9/16
Tooling
P
.062
.093
.093
.093
.093
.125
Anvil
Punch
FA-2
FA-4
FA-6
FA-8
FA-10
FA-25
FP-2
FP-4
FP-6
FP-8
FP-10
FP-25
R1
Shank
Code
Board
Thickness
± .003
A
B
C
D
E
F
1/32
1/16
3/32
1/8
3/16
1/4
.027
.060
.104
.144
.221
.301
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
FLAT HEAD CAPTIVE MACHINE SCREWS
Phillips
For Retainer Washers, see page 147.
Self-Locking Device available, see page 109.
ORDER EXAMPLE:
114122 - .430 - SS - 12
Basic
Part
Number
Length
Finish:
See page
277
Material:
See chart
Basic
Part
Number
Thread
114122
114124
114126
114128
114130
114123
114125
2-56
4-40
6-32
8-32
10-32
1/4-20
5/16-18
D
Head Dia
Max
Min
.172
.225
.279
.332
.385
.507
.635
.147
.195
.244
.292
.340
.452
.568
H
Ref
.051
.067
.083
.100
.116
.153
.191
W
Diameter
Y
Depth
Max
Min
Max
.102
.128
.174
.189
.204
.283
.365
.089
.115
.161
.176
.191
.270
.352
.063
.089
.106
.121
.136
.171
.216
Min
.047
.073
.083
.098
.113
.148
.194
K
B
± .010
± .005
1/8
5/32
3/16
3/16
1/4
.1/4
1/4
.061
.078
.095
.120
.130
.175
.230
L*
PK
Ref
Only
.43-.625
.43-.625
.43-2.00
.43-2.00
.43-2.00
.43-3.00
.50-3.50
.17
.22
.26
.28
.36
.39
.43
Available Material (see page 275)
B
S
SS
Brass, Composition 360
Steel, low carbon 1018 ATSM 108
Stainless Steel,
18-8, 302-304 series
SCREWS
To add the Lead Point, add the prefix P to part number.
EXAMPLE: P114122-.430-SS-12
Any one dimension change add to part number:
EXAMPLE: 114122-.500-SS-12 (K=3/16)
*For L tolerance, see page 281.
Increments of 1/16" is recommended,
however, any length may be specified.
Cost difference is negligible, additional
delivery time approximately 1-1/2 weeks.
FLAT HEAD CAPTIVE MACHINE SCREWS
Slotted
For Metric style see page 156.
ORDER EXAMPLE:
904960 - .430 - SS - 12
Basic
Part
Number
Length
Material:
See chart
Finish:
See page
277
To add the Lead Point, add the prefix P to part number.
EXAMPLE: P904960-.430-SS-12
Any one dimension change add to part number:
EXAMPLE: 904960-.500-SS-12 (K=3/16)
Basic
Part
Number
Thread
904960
904962
904964
904966
904968
904970
904972
2-56
4-40
6-32
8-32
10-32
1/4-20
5/16-18
A
Head Dia
Max
Min
.172
.225
.279
.332
.385
.507
.635
.147
.195
.244
.292
.340
.452
.568
H
Ref
.051
.067
.083
.100
.116
.153
.191
J
Slot Width
T
Slot Depth
Max
Min
Max
Min
.031
.039
.048
.054
.060
.075
.084
.023
.031
.039
.045
.050
.064
.072
.023
.030
.038
.045
.053
.070
.088
.015
.020
.024
.029
.034
.046
.058
K
B
± .010
± .005
1/8
5/32
3/16
3/16
1/4
1/4
1/4
.061
.078
.095
.120
.130
.175
.230
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
L*
PK
Ref
Only
.430-1.00
.430-1.50
.430-3.00
.430-3.00
.430-3.00
.430-4.00
.500-3.50
.17
.22
.26
.28
.36
.39
.43
Available Material (see page 275)
B
S
SS
Brass, Composition 360
Steel, low carbon 1018 ATSM 108
Stainless Steel, 18-8,
302-304 series, ASTMA580/A580M-98
135
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
FLAT HEAD CAPTIVE MACHINE SCREWS
Phillips
For Retainer Washers, see page 147.
Self-Locking Device available, see page 109.
ORDER EXAMPLE:
114215 - .500 - SS - 12
Basic
Part
Number
Length
Finish:
See page
277
Material:
See chart
To add the Lead Point, add the prefix P to part number.
EXAMPLE: P114215-.500-SS-12
Any one dimension change add to part number:
EXAMPLE: 114215-.500-SS-12 (K=3/16)
SCREWS
Basic
Part
Number
Thread
114215
114217
114219
114221
114223
114225
2-56
4-40
6-32
8-32
10-32
1/4-20
D
Head Dia
Max
Min
.172
.225
.279
.332
.385
.507
.143
.191
.238
.285
.333
.442
H
Ref
.037
.049
.060
.072
.083
.110
W
Diameter
Y
Depth
Max
Min
Max
Min
.097
.136
.162
.191
.225
.294
.087
.126
.152
.179
.213
.282
.063
.089
.106
.124
.147
.192
.033
.050
.065
.081
.097
.136
K
B
± .010
± .005
1/8
5/32
3/16
3/16
1/4
1/4
.061
.078
.095
.120
.130
.175
L*
PK
Ref
Only
.430-.625
.430-.625
.430-2.00
.430-2.00
.430-2.00
.500-3.00
.17
.22
.26
.28
.36
.39
Available Material
(see page 275)
S
SS
Steel, low carbon 1018 ATSM 108
Stainless Steel,
18-8, 302-304 series
*L +.000-.031 recommended increments
of 1/16, however, any length may be
specified. Cost difference is negligible,
additional delivery time approximately
1-1/2 weeks.
FLAT HEAD CAPTIVE MACHINE SCREWS
Slotted
ORDER EXAMPLE:
904961 - .500 - SS - 12
Basic
Part
Number
Length
Material:
See chart
Finish:
See page
277
To add the Lead Point, add the prefix P to part number.
EXAMPLE: P904961-.430-SS-12
Any one dimension change add to part number:
EXAMPLE: 904961-.500-SS-12 (K=3/16)
136
Basic
Part
Number
Thread
904961
904963
904965
904967
904969
904971
904973
2-56
4-40
6-32
8-32
10-32
1/4-20
5/16-18
A
Head Dia
Max
Min
.172
.225
.279
.332
.385
.507
.635
.143
.191
.238
.285
.333
.442
.556
H
Ref
.037
.049
.060
.072
.083
.110
.138
J
Slot Width
T
Slot Depth
Max
Min
Max
.031
.039
.048
.054
.060
.075
.084
.023
.031
.039
.045
.050
.064
.072
.019
.024
.030
.036
.042
.055
.069
Min
.012
.017
.022
.027
.031
.042
.053
K
B
± .010
± .005
1/8
5/32
3/16
3/16
1/4
1/4
1/4
.061
.078
.095
.120
.130
.175
.230
L*
PK
Ref
Only
.430-1.00
.430-1.50
.430-3.00
.430-3.00
.430-3.00
.500-4.00
.500-3.50
.17
.22
.26
.28
.36
.39
.43
Available Material
(see page 275)
S
SS
Steel, low carbon 1018 ATSM 108
Stainless Steel, 18-8, 302-304
series, ASTMA580/A580M-98
*L +.000-.031 recommended increments
of 1/16, however, any length may be
specified. Cost difference is negligible,
additional delivery time approximately 11/2 weeks.
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
HEX SOCKET FLAT CAPTIVE HEAD SCREWS
For Retainer Washers, see page 147.
ORDER EXAMPLE:
114132 - .430 - SS - 12
Length
Finish:
See page
277
Material:
See chart
Available Material (see page 275)
Any one dimension change add to part number .
EXAMPLE: 114132-.430-SS-12 (K=3/16)
To add the Lead Point, add the prefix P to part number.
EXAMPLE: P114132-.430-SS-12
Basic
Part
Number
Thread
114132
114133
114134
114135
114136
4-40
6-32
8-32
10-32
1/4-20
A
Head Dia
Max
†
.255
.307
.359
.411
.531
B
S
SS
H
Head Height
Abs.
Min
Ref.
Flush
Tol.
.218
.263
.311
.359
.480
.083
.097
.112
.127
.161
.011
.013
.014
.015
.016
J
Hex Socket Size
Brass, Composition 70/30
Steel, ASTM-A-108-93 (12L14) QQ-S-637
Stainless Steel, 18-8, 302-304 series
T
Key Engage.
Nominal
1/16
5/64
3/32
1/8
5/32
.062
.078
.094
.125
.156
K
± .010
B
± .005
L*
Increments
of 1/16th
5/32
3/16
3/16
1/4
1/4
.078
.095
.120
.130
.175
.43-1.50
.43-3.00
.43-3.00
.43-3.00
.50-3.50
Min
.055
.066
.076
.087
.111
PK
Ref
Only
SCREWS
Basic
Part
Number
.22
.26
.28
.36
.39
†Theoretical Sharp Max.
*For L tolerance, see page 281. Increments of 1/16" is recommended, however , any length may be specified.
Cost difference is negligible, addi ional delivery time approximately 1-1/2 weeks.
HEX WASHER HEAD
ORDER EXAMPLE:
115100 - .500 - SS - 12
Basic
Part
Number
Length
Finish:
See page
277
Material:
See chart
**Any one dimension change add to part number .
EXAMPLE: 115100-.500-SS-12 (K=3/16)
To add the Lead Point, add the prefix P to part number.
EXAMPLE: P115100-.500-SS-12
Basic
Part
Number
Nominal
Thread
Size
F
Washer Dia
Max
Min
Max
Min
Max
Min
Max
Min
115100
115102
115104
115106
115108
115110
115112
115114
4-40
6-32
8-32
10-32
12-24
1/4-20
1/4-28
5/16-18
.243
.328
.348
.414
.432
.520
.520
.676
.225
.302
.322
.384
.398
.480
.480
.624
.019
.025
.031
.031
.039
.050
.050
.055
.011
.015
.019
.019
.022
.030
.030
.035
.039
.048
.054
.060
.067
.075
.075
.084
.031
.039
.045
.050
.056
.064
.064
.072
.042
.053
.074
.080
.103
.111
.111
.134
.025
.033
.052
.057
.077
.083
.083
.100
U Washer
Thickness
J
T
± .005
± .010
5/32
3/16
3/16
1/4
1/4
1/4
1/4
1/4
B
L*
K
.312-1.00
.375-1.00
.500-1.50
.500-1.50
.500-1.250
.500-1.500
.500-2.00
.500-3.00
.078
.095
.120
.130
.157
.175
.175
.230
D Width
Across Flats
C
Width
Across
Corners
H Height
of Head
Max
Min
Min
Min
Max
.187
.250
.250
.312
.312
.375
.375
.500
.181
.244
.244
.305
.305
.367
.367
.489
.202
.272
.272
.340
.340
.409
.409
.545
.060
.093
.110
.120
.155
.190
.190
.230
.049
.080
.096
.105
.139
.172
.172
.208
PK
Ref
Only
.17
.22
.26
.28
.28
.36
.36
.43
*For L tolerance, see page 281. Increments of 1/16" is recommended, however , any length may be specified.
Cost difference is negligible, addi ional delivery time approximately 1-1/2 weeks.
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
137
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
CAPTIVE PANEL SCREW ASSEMBLY LOW PROFILE
82° Flat Head - Slotted or Phillips
Slotted
Phillips
Easy One Step
Installation Procedure
Flare Tool supplied by ASM.
Countersink 82° by approximately
1/2 board thickness.
SCREWS
Part Number
Thread
Part Number
Thread
904960
904962
904964
904966
904968
904970
2-56
4-40
6-32
8-32
10-32
1/4-20
114122
114124
114126
114128
114130
114123
2-56
4-40
6-32
8-32
10-32
1/4-20
Available Material (see page 275)
S
SS
2-56
4-40
6-32
8-32
10-32
1/4-20
M Dia
Min
Max
.185
.231
.231
.231
.231
.309
.188
.234
.234
.234
.234
.312
Mounting
Hole Dia
+.003 -.000
.188
.234
.234
.234
.234
.312
S
Dia
P
Tooling
1/4
5/16
3/8
1/2
1/2
5/8
.122
.154
.185
.220
.252
.326
AFH-2
FP-2
AFH-4
FP-4
AFH-6
FP-6
AFH-8
FP-8
AFH-10 FP-10
AFH-25 FP-25
Anvil
Punch
For screw
dimensions,
see page 135.
ORDER EXAMPLE:
904960 - .500 - B - SS - 12
Basic
Part
Number
Retainer and Flare Tooling Data
Thread
Steel Alloy, low carbon 1018 ASTM 108
Stainless Steel, 18-8, 302-304 series
Length
Shank Code:
See chart
Material:
See chart
Finish:
See page
277
R1
Shank
Code
Board
Thickness
± .003
A
B
C
D
E
F
1/32
1/16
3/32
1/8
3/16
1/4
.027
.060
.104
.144
.221
.301
CAPTIVE PANEL SCREW ASSEMBLY LOW PROFILE
100° Flat Head - Slotted or Phillips
Slotted
Phillips
Easy One Step
Installation Procedure
Flare Tool supplied by ASM.
Countersink 82° by approximately
1/2 board thickness.
Part Number
Thread
Part Number
904961
904963
904965
904967
904969
904971
Thread
114215
114217
114219
114221
114223
114225
2-56
4-40
6-32
8-32
10-32
1/4-20
2-56
4-40
6-32
8-32
10-32
1/4-20
Available Material (see page 275)
S
SS
2-56
4-40
6-32
8-32
10-32
1/4-20
138
M Dia
Min
.185
.231
.231
.231
.231
.309
Max
.188
.234
.234
.234
.234
.312
Mounting
Hole Dia
+.003 -.000
.188
.234
.234
.234
.234
.312
Tooling
S
Dia
P
1/4
5/16
3/8
1/2
1/2
5/8
.108
.144
.173
.185
.196
.280
Anvil
Punch
AFH-2
FP-2
AFH-4
FP-4
AFH-6
FP-6
AFH-8
FP-8
AFH-10 FP-10
AFH-25 FP-25
For screw
dimensions
see page 136.
ASTMA580/A580M-98
ORDER EXAMPLE:
904961 - .500 - B - SS - 12
Basic
Part
Number
Retainer and Flare Tooling Data
Thread
Steel Alloy, low carbon 1018 ASTM 108
Stainless Steel, 18-8, 302-304 Series
Length
Shank Code:
See chart
Material:
See chart
Finish:
See page
277
R1
Shank
Code
Board
Thickness
± .003
A
B
C
D
E
F
1/32
1/16
3/32
1/8
3/16
1/4
.027
.060
.104
.144
.221
.301
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
HEX SOCKET LOW HEAD CAP SCREW CAPTIVE
For Hex Socket Low Head Cap Scr ew Assembly
For Retainer Washers, see page 147.
ALSO AVAILABLE AS AN
FMR2002 ASSEMBLY
(see pages 110-112
for more information)
Order Example:
116050-.500-U-SS-12
Basic
Part
Number
Length
Finish:
See page
277
Material:
See chart
To add the Lead Point, add the prefix P to part number.
EXAMPLE: P116050-.500-SS-12
Available Material (see page 275)
**B Brass, Composition 360
S Steel, ASTM-A-108-93 (12L14) QQ-S-637
SS Stainless Steel, 18-8, 302-304 series
Any one dimension change add to part number:
EXAMPLE: 116054-.500-SS-12 (K=3/16)
Basic
Part
Number
Thread
Basic
Screw
Dia
Max
Min
Max
Min
116050
116052
116054
116056
116058
116060
4-40
6-32
8-32
10-32
1/4-20
5/16-18
.112
.138
.164
.190
.250
.312
.183
.226
.270
.312
.375
.437
.178
.221
.265
.307
.369
.431
.056
.069
.082
.095
.125
.156
.053
.066
.079
.092
.121
.152
D
SCREWS
ORDER EXAMPLE:
116054 - .500 - SS - 12
H
W
Socket
Size
Engage.
Min
G
K
± .005
± .010
.050
.062
.078
.093
.125
.156
.038
.050
.060
.072
.094
.120
.078
.095
.120
.130
.175
.230
5/32
3/16
3/16
1/4
1/4
1/4
T
L*
PK
Ref
Only
.375-1.25
.375-1.25
.375-1.25
.375-1.50
.375-3.00
.500-3.00
.22
.26
.28
.36
.39
.43
L tolerance-1" under +0-1/32
above +0-1/16 recommended
increments of 1/16 however
any length may be specified.
Cost difference is negligible,
additional delivery time
approximately 1-1/2 weeks.
HEX SOCKET LOW HEAD CAP SCREW ASSEMBLY
Split Lock Washer (G)
See page 157 for details.
Internal Tooth Lock Washer (H)
See page 157 for details.
External Tooth Lock Washer (J)
See page 157 for details.
ORDER EXAMPLE:
ORDER EXAMPLE:
ORDER EXAMPLE:
116054 - 500 - SS - G - 12
116054 - 500 - SS - H - 12
116054 - 500 - SS - J - 12
Basic
Part
Number
Length
Material:
See chart
Assy with
Split (G)
L’Washer
and Flat
Washer
Finish:
See page
277
Basic
Part
Number
Length
Material: Assy with
Finish:
See chart Internal (H) See page
L’Washer
277
and Flat
Washer
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
Basic
Part
Number
Length
Material: Assy with
See chart External (J)
L’Washer
and Flat
Washer
Finish:
See page
277
139
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
HEX SOCKET LOW HEAD
CAPTIVE PANEL SCREW ASSEMBLY - LOW PROFILE
(see page 157)
(see below)
Screw and Retainer Available Material
(see page 275)
B
S
SS
Brass, composition 360
Steel ASTM-A-108-93(12L14)QQ-S-637
Stainless Steel 18-8, 302-304 series
SCREWS
ORDER EXAMPLE:
116054 - .500 - B - SS - 12
Basic
Part
Number
Length
Shank
Code
Material:
See chart
Finish:
See page
277
Easy One-Step Installation Procedure
Flare Tool supplied by ASM.
Countersink 82° by approximately 1/2 board thickness.
Any one dimension change add to part number .
EXAMPLE: 116054-.500-SS-12 (K=1/8)
Basic
Part
Number
Thread
116054
116056
116058
8-32
10-32
1/4-20
D
H
D
Screw
Dia
Max
Min
Max
Min
W
Socket
Size
.164
.190
.250
.270
.312
.375
.265
.307
.369
.082
.095
.125
.079
.092
.121
.078
.093
.125
T
Engagement
G
K
± .005
± .010
.120
.130
.175
3/16
1/4
1/4
L*
Min
.060
.072
.094
.375-1.25
.375-1.50
.375-3.00
*For L tolerance, see page 281. Increments of 1/16" is recommended, however , any length may be specified. Cost dif ference is negligible, addi ional delivery time
approximately 1-1/2 weeks.
Retainer and Flare Tooling Data
M Dia
Thread
8-32
10-32
1/4-20
140
Min
Max
.231
.231
.309
.234
.234
.312
Mounting
Hole Dia
+.003 -.000
.234
.234
.312
S
Dia
P
3/8
1/2
1/2
.093
.093
.125
Tooling
Anvil
FA-8H
FA-10H
FA-25H
Punch
FP-8H
FP-10H
FP-25H
Shank
Code
C
D
E
F
Board
Thickness
3/32
1/8
3/16
1/4
R1
± .003
.104
.144
.221
.301
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
HEX SOCKET BUTTON HEAD SCREWS CAPTIVE
For Hex Socket Button Head Scr ew Assembly
For Retainer Washers, see page147.
ALSO AVAILABLE AS AN
FMR2002 ASSEMBLY
(see pages 110-112
for more information)
Order Example:
ORDER EXAMPLE:
116064 - .500 - SS - 12
Length
Finish:
See page
277
Material:
See chart
To add the Lead Point, add the prefix P to part number.
EXAMPLE: P116064-.500-SS-12
Any one dimension change add to part number:
EXAMPLE: 116064-.500-SS-12 (K=1/8)
D
Basic
Part
Number
Thread
116064
116066
116068
116070
116078
116080
4-40
6-32
8-32
10-32
1/4-20
5/16-18
Available Material (see page 275)
B
S
SS
Brass, Composition 70/30
Steel, ASTM-A-108-93 (12L14) QQ-S-637
Stainless Steel, 18-8, 302-304 series
S
H
Max
Min
Max
Min
Head
Side
Height
Ref.
.213
.262
.312
.361
.437
.547
.201
.250
.298
.347
.419
.527
.059
.073
.087
.101
.132
.166
.051
.063
.077
.091
.122
.152
.015
.015
.015
.020
.031
.031
W
Nom.
.1/16
5/64
3/32
1/8
5/32
3/16
.062
.078
.094
.125
.156
.188
SCREWS
Basic
Part
Number
116064-.500-U-SS-12
T
Min
G
K
± .005
± .010
.035
.044
.052
.070
.087
.105
.078
.095
.120
.130
.175
.230
5/32
3/16
3/16
1/4
1/4
1/4
L*
PK
Ref
Only
.250-.500
.250-.625
.250-.750
.250-1.00
.375-1.00
.375-1.00
.22
.26
.28
.36
.39
.43
*L tolerance-1" under +01/32 above +0-1/16
recommended increments of
1/16 however any length
may be specified. Cost
difference is negligible,
addi ional delivery time
approximately 1-1/2 weeks.
HEX SOCKET BUTTON HEAD CAP SCREW ASSEMBLY
Split Lock Washer (G)
See page 157 for details.
Internal Tooth Lock Washer (H)
See page 157 for details.
External Tooth Lock Washer (J)
See page 157 for details.
ORDER EXAMPLE:
ORDER EXAMPLE:
ORDER EXAMPLE:
116064 - 500 - SS - G - 12
Basic
Part
Number
Length
Material:
See chart
Assy with
Split (G)
L’Washer
and Flat
Washer
Finish:
See page
277
116064 - 500 - SS - H - 12
Basic
Part
Number
Length
Material: Assy with
See chart Internal (H)
L’Washer
and Flat
Washer
Finish:
See page
277
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
116064 - 500 - SS - J - 12
Basic
Part
Number
Length
Material:
See chart
Assy with
External (J)
L’Washer
and Flat
Washer
Finish:
See page
277
141
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
HEX SOCKET BUTTON HEAD
CAPTIVE PANEL SCREW ASSEMBLY
(see page 157)
(see below)
Easy One Step Installation Procedure
Flare Tool supplied by ASM.
Countersink 82° by approximately 1/2 board thickness.
SCREWS
ORDER EXAMPLE:
116064 - .500 - B - SS - 12
Basic
Part
Number
Length
Shank
Code
Material:
See chart
Screw and Retainer Available Material
(see page 275)
Finish:
See page
277
B
S
SS
Any one dimension change add to part number .
EXAMPLE: 116064-.500-SS-12 (K=1/8)
Basic Part
Number
Thread
116064
116066
116068
116070
116078
4-40
6-32
8-32
10-32
1/4-20
Max
Min
Max
Min
S
Head Side
Height
Ref.
.213
.262
.312
.361
.437
.201
.250
.298
.347
.419
.059
.073
.087
.101
.132
.051
.063
.077
.091
.122
.015
.015
.015
.020
.031
D
H
W
Nom
1/16
5/64
3/32
1/8
5/32
.062
.078
.094
.125
.156
Brass, composition 360
Steel ASTM-A-108-93(12L14)QQ-S-637
Stainless Steel 18-8, 302-304 series
T
Min
.035
.044
.052
.070
.087
G
K
± .005
± .010
.078
.095
.120
.130
.175
5/32
3/16
3/16
1/4
1/4
L*
.250-.500
.250-.625
.250-.750
.250-1.00
.375-1.00
*For L tolerance see page 281. Increments of 1/16" recommended however any length may be specified.
Cost difference is negligible, addi ional delivery time approximately 1-1/2 weeks.
Retainer and Flare Tooling Data
Thread
4-40
6-32
8-32
10-32
1/4-20
142
M Dia
Min
Max
.231
.231
.231
.231
.309
.234
.234
.234
.234
.312
Mounting
Hole Dia
+.003 -.000
.234
.234
.234
.234
.312
S
Dia
5/16
3/8
1/2
1/2
9/16
P
.093
.093
.093
.093
.125
Tooling
Anvil
Punch
FA-4
FA-6
FA-8B
FA-10B
FA-25B
FP-4
FP-6
FP-8B
FP-10B
FP-25B
R1
Shank
Code
Board
Thickness
± .003
B
C
D
E
F
1/16
3/32
1/8
3/16
1/4
.060
.104
.144
.221
.301
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
TORX SOCKET BUTTON HEAD CAPTIVE SCREWS
For Torx Socket Button Head Scr ew Assembly
ORDER EXAMPLE:
T116064 - .500 - SS - 12
Length
Material:
See chart
Finish:
See page
277
Available Material (see page 275)
**Any one dimension change add to part number .
EXAMPLE: T116064-.500-SS-12 (K=1/8)
To add the Lead Point, prefix P to part number.
EXAMPLE: PT116064-.500-SS-12
D
Basic Part
Number
Thread
T116064
T116066
T116068
T116070
T116078
T116080
4-40
6-32
8-32
10-32
1/4-20
5/16-18
Min
Max
Min
.213
.262
.312
.361
.437
.547
.201
.250
.298
.347
.419
.527
.059
.073
.087
.101
.132
.166
.051
.063
.077
.091
.122
.152
Alloy Steel, Type 4037
ASTM A574-92A-40-45 RC
SS
Stainless Steel
G
K
± .005
± .010
.078
.095
.120
.130
.175
.230
5/32
3/16
3/16
1/4
1/4
1/4
H
Max
AS
L*
.250-.500
.250-.625
.250-.750
.250-1.00
.375-1.00
.375-1.00
PK
Ref
Only
.22
.26
.28
.36
.39
.43
*L tolerance-1" under +01/32 above +0-1/16
recommended
increments of 1/16
however any leng h may
be specified. Cost
difference is negligible,
additional delivery time
approximately 1-1/2
weeks.
SCREWS
Basic
Part
Number
TORX SOCKET BUTTON HEAD CAPTIVE SCREW ASSEMBLY
Split Lock Washer (G)
See page 157 for details.
Internal Tooth Lock Washer (H)
See page 157 for details.
External Tooth Lock Washer (J)
See page 157 for details.
ORDER EXAMPLE:
ORDER EXAMPLE:
ORDER EXAMPLE:
T116064 - 500 - SS - G - 12
T116064 - 500 - SS - H - 12
T116064 - 500 - SS - J - 12
Basic
Part
Number
Length
Material:
See chart
Assy with
Split (G)
L’Washer
and Flat
Washer
Finish:
See page
277
Basic
Part
Number
Length
Material:
See chart
Assy with
Internal (H)
L’Washer
and Flat
Washer
Finish:
See page
277
Basic
Part
Number
Length
Material:
See chart
Assy with
External (J)
L’Washer
and Flat
Washer
Finish:
See page
277
TORX HEAD PANEL SCREW ASSEMBLY - FULL THREAD
Split Lock Washer (GF)
Also available with
Internal Tooth Lock Washer (HF)
and
External Tooth Lock Washer (JF)
See page 157 for details.
ORDER EXAMPLE:
T116064 - .250 - SS - GF - 12
Basic
Part
Number
Length
Material:
See chart
Finish:
Assembly
w/Split (GF), See page
277
Internal (HF) or
External (JF)
Available Material
(see page 275)
S
Steel
ASTM-A-108-93(12L14)
QQ-S-637
SS
Stainless Steel
18-8, 302-304 series
BELLEVILLE WASHER
See page 116
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
Captive Washers Specifications
Screw
Size
4
6
8
10
1/4
5/16
Outside Dia
± .010
.255
.312
.375
.375
.375
.625
T*
Thickness
± .005
.030
.030
.030
.030
.045**
.085
*Fully threaded up to the flat washer .
**Maximum length 1.50 in.
143
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
TORX SOCKET BUTTON HEAD
CAPTIVE PANEL SCREW ASSEMBLY
(see page 157)
(see page 157)
L
G
Easy One Step Installation Procedure
Flare Tool supplied by ASM.
Countersink 82° by approximately
1/2 board thickness.
SCREWS
ALSO AVAILABLE AS AN
FMR2002 ASSEMBLY
(see pages 110-112 for more information)
ORDER EXAMPLE:
T116064 - .500 - B - SS - 12
Basic
Part
Number
Length
Shank Code
Order Example:
T116064-.500-B-U-SS-12
Finish:
See page
277
Material:
See chart
Screw and Retainer Available Material
(see page 275)
Any one dimension change add to part number .
EXAMPLE: T116064-.500-SS-12 (K=1/8)
Basic Part
Number
Thread
T116064
T116066
T116068
T116070
T116078
4-40
6-32
8-32
10-32
1/4-20
S
SS
D
Max
.213
.262
.312
.361
.437
H
Min
Max
Min
.201
.250
.298
.347
.419
.059
.073
.087
.101
.132
.051
.063
.077
.091
.122
Steel ASTM-A-108-93(12L14)QQ-S-637
Stainless Steel 18-8, 302-304 series
G
K
± .005
± .010
.078
.095
.120
.130
.175
5/32
3/16
3/16
1/4
1/4
L*
.250-.500
.250-.625
.250-.750
.250-1.00
.375-1.00
*For L tolerance see page 281. Increments of 1/16" recommended, however any length may be specified.
Cost difference is negligible, additional delivery time approximately 1-1/2 weeks.
Retainer and Flare Tooling Data
Thread
4-40
6-32
8-32
10-32
1/4-20
144
M Dia
Min
Max
.231
.231
.231
.231
.309
.234
.234
.234
.234
.312
Mounting
Hole Dia
+.003 -.000
.234
.234
.234
.234
.312
S
Dia
5/16
3/8
7/16
7/16
9/16
P
.093
.093
.093
.093
.125
Tooling
Anvil
FA-4
FA-6
FA-8B
FA-10B
FA-25B
Punch
FP-4
FP-6
FP-8B
FP-10B
FP-25B
R1
Shank
Code
Board
Thickness
± .003
B
C
D
E
F
1/16
3/32
1/8
3/16
1/4
.060
.104
.144
.221
.301
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
SECURITY SCREW PAN HEAD CAPTIVE
18/8 Stainless Steel Only
Spanner
ORDER EXAMPLE:
115050 - .375 - SS - 1
Length
Finish:
See page
277
Material:
See chart
SCREWS
Basic
Part
Number
To add the Lead Point, add the prefix P to part number.
EXAMPLE: P115050-.375- SS-1
**Any one dimension change add to part number:
EXAMPLE: 115050-.375-SS-1 (K=3/16)
Basic
Part
Number
Thread
A
Head Diameter
Max
Min
B
Head Height
Max
Min
115050
115052
115054
115056
115062
4-40
6-32
8-32
10-32
1/4-20
.219
.270
.322
.373
.492
.068
.082
.096
.110
.144
.205
.256
.306
.357
.473
.058
.072
.085
.099
.130
K**
± .010
G
± .005
L*
PK
Ref
Only
5/32
3/16
3/16
1/4
1/4
.078
.095
.120
.130
.175
.250-1.5
.375-3.0
.500-4.0
.500-4.0
.500-4.0
.22
.26
.28
.36
.39
*L +.000-.031 recommended increments of 1/16, however, any length may be specified.
Cost difference is negligible, addi ional delivery time approximately 1-1/2 weeks.
SECURITY SCREW PAN HEAD CAPTIVE ASSEMBLY
Split Lock Washer (G)
See page 157 for details.
Internal Tooth Lock Washer (H)
See page 157 for details.
External Tooth Lock Washer (J)
See page 157 for details.
ORDER EXAMPLE:
ORDER EXAMPLE:
ORDER EXAMPLE:
115050 - 500 - SS - G - 12
115050 - 500 - SS - H - 12
115050 - 500 - SS - J - 12
Basic
Part
Number
Length
Material:
See chart
Assy with
Split (G)
L’Washer
and Flat
Washer
Finish:
See page
277
Basic
Part
Number
Length
Material:
See chart
Assy with
Internal (H)
L’Washer
and Flat
Washer
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
Finish:
See page
277
Basic
Part
Number
Length
Material:
See chart
Assy with
External (J)
L’Washer
and Flat
Washer
Finish:
See page
277
145
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
SECURITY SCREW CAPTIVE - FLAT HEAD
For Retainer Washers, see page 147.
Spanner
R=.030 Max.
ORDER EXAMPLE:
115068 - .500 - SS - 1
18-8
Stainless
Steel Only
SCREWS
Basic
Part
Number
Thread
115068
115070
115072
115074
115080
4-40
6-32
8-32
10-32
1/4-20
Basic
Part
Number
D
Head Diameter
Length
H
Head Height
Max
Min
Max
Min
.225
.279
.332
.385
.507
.200
.249
.300
.348
.462
.067
.083
.100
.116
.153
.055
.069
.084
.098
.131
18-8
Stainless
Steel
Finish:
See page
277
K
G
L
± .010
± .005
± 1/32
5/32
3/16
3/16
1/4
1/4
.078
.095
.120
.130
.175
.250-.50
.375-3.0
.375-4.0
.500-4.0
.500-4.0
SECURITY SCREW PIN SOCKET - FLAT HEAD
R=.030 Max.
Pin Socket
ORDER EXAMPLE:
115086 - .500 - SS - 1
18-8
Stainless
Steel Only
Basic
Part
Number
Thread
115086
115088
115090
115094
6-32
8-32
10-32
1/4-20
Basic
Part
Number
Length
Max
Min
Max
Min
J
Hex
Socket
Screw
.307
.359
.411
.531
.263
.311
.359
.480
.097
.112
.127
.161
.013
.014
.015
.016
1/8
1/8
5/32
5/32
D
Head Diameter
H
Head Height
18-8
Stainless
Steel
Finish:
See page
277
K
B
L
± .010
± .005
± 1/32
3/16
3/16
1/4
.1/4
.078
.120
.130
.175
.375-1.0
.375-1.5
.500-2.0
.500-2.0
NOTE: Standard Fastener products having a class 2A thread, once plated, may not enter 2A GO and NO-GO GAGES.
SECURITY SCREW SOCKET PIN HEAD - BUTTON
18-8
Stainless
Steel Only
Pin Socket
ORDER EXAMPLE:
115087 - .500 - SS - 1
Slight flat
and/or
countersunk
permissible
146
Basic
Part
Number
Thread
115087
115089
115091
115093
6-32
8-32
10-32
1/4-20
D
Head Diameter
H
Head Height
Max
Min
Max
Min
.262
.312
.361
.437
.250
.298
.347
.419
.073
.087
.101
.132
.063
.077
.091
.122
Basic
Part
Number
S
Head
Side
Height
.015
.015
.020
.031
Length
18-8
Stainless
Steel
T
J
L
Key
Hex
Length
Socket Engagement
Size
1/8
.044 .250-1.0
1/8
.052 .375-1.0
5/32
.070 .250-2.0
5/32
.087 .500-2.0
Finish:
See page
277
K
B
± .010
± .005
3/16
3/16
1/4
1/4
.078
.120
.130
.175
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Thread UNC-3A (except 10-32 UNF-3A) R =.030 Max.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
PANEL SCREW RETAINER WASHERS
STAINLESS STEEL
NYLON
Basic
Part Number
Basic
Part
Thread
Number
800007 SS
2-56
800008 SS
4-40
800009 SS
6-32
800010 SS
8-32
800011 SS 10-24
800012 SS 10-32
800013 SS 12-24
800014 SS 1/4-20
800015 SS 1/4-28
800016 SS 5/16-24
800016a SS 5/16-18
ID
Stainless
Steel
OD
± .005
± .005
.075
.093
.112
.146
.156
.265
Basic
Part
Number
800007 N
800000 N
800001 N
800002 N
800003 N
800004 N
800005 N
800006 N
800007a N
800007b N
800007c N
T
.010
.312
.190
.204
.214
Basic
Part Number
± .005
.171
.166
ORDER EXAMPLE:
800000 - N
.012
.375
ID
Thread
2-56
4-40
6-32
8-32
10-24
10-32
12-24
1/4-20
1/4-28
5/16-18
5/16-24
Nylon
OD
± .005
± .005
.075
.100
.125
.152
.167
.173
.193
.156
.010
.015
.171
.020
.312
.228
.030
.265
.375
.031
METRIC PANEL SCREW RETAINER WASHERS
STAINLESS STEEL
ORDER EXAMPLE:
M 800002 - SS
Basic
Part Number
Stainless Steel
Part Number
Thread
M 800002 SS
M 800003 SS
M 800004 SS
M 800005 SS
M 800006 SS
M 800007 SS
M 3 x 0.5
M 3.5 x 0.6
M 4 x 0.7
M 5 x 0.8
M6x1
M 8 x 1.2
ID
OD
T
± .15
± .15
4.4
.25
2.4
2.9
3.8
4.3
5.2
6.7
Material - Stainless Steel type 303 ASTM-A-581, 582.
8
NYLON
ORDER EXAMPLE:
M 800007 - N
Stainless
Steel
± .15
T
± .005
SCREWS
ORDER EXAMPLE:
800008 - SS
Basic
Part Number
All dimensions
are metric.
.32
9.5
Nylon
Part Number
Thread
M 800007 N
M 800008 N
M 800009 N
M 800010 N
M 800011 N
M 3 x 0.5
M 3.5 x 0.6
M 4 x 0.7
M 5 x 0.8
M6x1
Nylon
ID
OD
T
± .15
± .15
± .15
2.5
3.2
3.8
4.4
5.8
4.3
8
7.9
0.39
0.51
0.32
0.51
0.76
SECURITY TOOLS
SPANNER
Sizes 4, 6, 8, 10, 12, 1/4
DRIVERS: Complete handle with bit.
Please specify size.
BITS ONLY: Available in 5/16" hex drive
ORDER EXAMPLE:
SP - 4
ORDER EXAMPLE:
SPB - 4
Spanner
Spanner Size
Spanner Bit
Spanner Size
PIN SOCKET
DRIVERS: Complete handle with bit.
Please specify size.
ORDER EXAMPLE:
SP - 4
Tamperproof hex size: 1/4"
Socket Pin Head
Driver Socket
BITS ONLY: Available in 1/8" hex drive
ORDER EXAMPLE:
SPHB - 4
Socket Pin Head Bit
Driver Socket
Thread
Bit Size
6-32
8-32
10-32
10-24
1/4-20
5/16
1/8
1/8
5/32
5-32
5/32
3/16
Driver Socket
NOTE: Standard Fastener products having a class 2A thread, once plated, may not enter 2A GO and NO-GO GAGES.
147
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
METRIC PAN HEAD CAPTIVE PANEL SCREW
Available Material (see page 275)
B
S
SS
Brass, Type M558
Carbon Steel property class 8.8
Stainless Steel, 18-8
Pan Head Captive Panel Screw
Slotted (PS) or Phillips (PP)
ORDER EXAMPLE:
1810 - 8 - SS - PS - 12
Basic
Part
Number
Length
in mm
Material:
See chart
Head Style:
Slotted (PS)
or Phillips (PP)
Finish:
See page
277
Any one dimension change add to part number:
EXAMPLE: 1810-8-SS-PS-12 (K=4.5)
All dimensions in millimeters.
SCREWS
Basic
Part
Number
Thread
and
Pitch
Not Avail.
M 2 x .4
M 2.5 x.45
M 3 x .5
M 3.5 x .6
M 4 x .7
M 5 x .8
M 6 x 1.0
1810
1812
Not Avail.
1814
1816
1818
Head Height
B1
B
Phillips
Slotted
A
Head Dia
Max
C
Slot
J
Depth Width
Recess
E Dia
K
T Depth
Min
Max
Min
Max
Min
Max
Min
Max
Min
Max
Min
–
–
5.0 4.7
5.6 5.3
–
–
8.0 7.6
9.5 9.1
12.0 11.5
–
1.5
1.8
–
2.4
3.0
3.6
–
1.3
1.6
–
2.2
2.7
3.3
–
2.1
2.4
–
3.1
3.7
4.6
–
1.9
2.2
–
2.8
3.4
4.3
–
0.6
0.7
–
1.0
1.2
1.4
–
0.6
0.8
–
1.2
1.2
1.6
–
2.85
3.06
–
4.57
5.07
7.09
–
2.52
2.73
–
4.24
4.74
6.76
–
1.73
1.93
–
2.70
3.20
4.06
–
1.33
1.56
–
2.20
2.70
3.56
G
L*
Nom
Length
N
Width
± .25 ± .12
mm
mm
–
0.70
0.74
–
0.93
1.0
1.14
–
4.0
5.0
–
6.0
6.0
8.0
–
–
1.7 8-20
2.0 10-50
–
–
2.8 12-80
3.7 12-80
4.2 16-100
mm
*L ±1 5 mm recommended increments of even number mm however , any length may be specified.
METRIC PAN HEAD CAPTIVE PANEL SCREW ASSEMBLY
Internal Tooth Lock Washer (I)
See page 157 for details.
Split Lock Washer (S)
See page 157 for details.
ORDER EXAMPLE:
1810 - 8 - SS - PS - S - 12
Basic
Part
Number
Length
in mm
Material:
See chart
Pan Head
Slotted (PS)
or Phillips (PP)
External Tooth Lock Washer (E)
See page 157 for details.
Assembly
Finish:
w/Split (S) See page
L’Washer
277
& Flat Washer
ORDER EXAMPLE:
1810 - 8 - SS - PS - I - 12
Basic
Part
Number
Material:
See chart
Pan Head
Slotted (PS)
or Phillips (PP)
Assembly
Finish:
w/Internal (I) See page
L’Washer
277
& Flat Washer
ORDER EXAMPLE:
1810 - 8 - SS - PS - E - 12
Basic
Part
Number
148
Length
in mm
Length
in mm
Material:
See chart
Pan Head
Slotted (PS)
or Phillips (PP)
Assembly
Finish:
w/External (E) See page
L’Washer
277
& Flat Washer
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Fastener after captivation may not accept GO GAGE on last inside thread.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
METRIC PAN HEAD CAPTIVE PANEL SCREW ASSEMBLY
(see page 157 for details)
Easy One Step Installation Procedure
(typical for all assemblies)
Flare tool supplied by ASM. Countersink 82°
by approximately 1/2 board thickness.
Specify S for Split Lock W asher assembly
Screw Available Material
Basic
Part
Number
Pan Head
Slotted (PS)
or Phillips (PP)
Length
in mm
Shank Code:
See chart
below
Material:
See chart
Washer Type:
See page 157
B
S
SS
Finish:
See page
277
Brass, Type M558
Carbon Steel property class 8.8
Stainless Steel, 18-8
Retainer Available Material
B
Any one dimension change add to part number . EXAMPLE: 1810-8-SS-E-12 (K-4.5)
S
SS
All dimensions are in millimeters.
Basic
Part
Number
Thread
and
Pitch
Not Avail.
M 2 x .4
M 2.5 x.45
M 3 x .5
M 3.5 x .6
M 4 x .7
M 5 x .8
M 6 x 1.0
1810
1812
Not Avail.
1814
1816
1818
Head Height
B1
B
Phillips
Slotted
A
Head Dia
C
Slot
Brass QQ B-626
Comp 360 1/2 Hard ASTMB-16
Steel ASTM-A-108, QQ-S-637(12L14)
Stainless Steel, ASTM-A-581, A-582
(Non-magnetic) 303 series
Recess
J
E Dia
Depth Width
N
Width
T Depth
K
G
L*
Nom
Length
± .25 ± .12
Min
Max
Min
Max
Min
Max
Min
Max
Min
Max
Min
nom
mm
mm
–
–
5.0 4.7
5.6 5.3
–
–
9.5 7.6
10.0 9.1
12.0 11.5
–
1.5
1.8
–
2.4
3.0
3.6
–
1.3
1.6
–
2.2
2.7
3.3
–
2.1
2.4
–
3.1
3.7
4.6
–
1.9
2.2
–
2.8
3.4
4.3
–
0.6
0.7
–
1.0
1.2
1.4
–
0.7
0.8
–
1.2
1.2
1.6
–
2.85
3.06
–
4.57
5.07
7.09
–
2.46
2.30
–
4.20
4.71
6.64
–
1.78
1.96
–
2.76
3.20
4.07
–
1.38
1.56
–
2.31
2.70
3.62
–
0.70
0.74
–
0.93
1.00
1.14
–
4.0
5.0
–
6.0
6.0
8.0
–
1.7
2.0
–
2.8
3.7
4.2
Max
SCREWS
ORDER EXAMPLE:
1810 - PS - 8 - B - SS - E - 12
mm
–
8-20
10-50
–
12-80
12-80
16-100
*L ± 1.5 mm recommended increments of even number mm however , any leng h may be specified.
Retainer and Flare Tooling Data
All dimensions are in inches.
Shank
Code
Board
Thickness
R ± .003
A
B
C
D
E
F
1/32
1/16
3/32
1/8
3/16
1/4
.027
.060
.104
.144
.221
.301
1
Thread
M 2 x .4
Not Avail.
M 2.5 x 4.5
M 3 x .5
M 3.5 x 6
Not Avail.
M 4 x .7
M 5 x .8
M 6 x 1.0
M Dia
Mounting
Hole Dia
S
Dia
P
Anvil
Punch
–
–
–
.375
.437
.062
.060
MA2.5
MA3
MP2.5
MP3
–
–
–
–
–
.240
.281
.321
.531
.625
.625
.093
.093
.125
MA4
MA5
MA6
MP4
MP5
MP6
Min
Max
+.003 -.000
–
–
–
–
.178
.200
.175 .178
.197 .200
–
–
.237 .240
.278 .281
.318 .321
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Fastener after captivation may not accept GO GAGE on last inside thread.
Tooling
149
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
METRIC CHEESE HEAD CAPTIVE PANEL SCREW
Slotted
ORDER EXAMPLE:
1820 - 8 - SS - 12
Basic
Part
Number
Length
in mm
Material:
See chart
Finish:
See page
277
Available Material (see page 275)
B
S
SS
Any one dimension change add to part number:
EXAMPLE: 1820-8-SS-12 (K=4.5)
All dimensions are in millimeters
Brass, Type M558
Carbon Steel 4.8
Stainless Steel, 18-8
SCREWS
Basic
Part
Number
Thread
and
Pitch
A
Head Dia
Nom
B
Head
Height
C
Slot Depth
Max
J
Slot Width
Nom
K
± .25 mm
G
± .12 mm
L*
Nom Length
in mm
1820
1821
1822
1823
1824
1825
1826
M 2 x .4
M 2.5 x.45
M 3 x .5
M 3.5 x .6
M 4 x .7
M 5 x .8
M 6 x 1.0
3.8
4.5
5.5
6.0
7.0
8.5
10.0
1.3
1.6
2
2.4
2.6
3.3
3.9
.85
1.00
1.30
1.40
1.60
2.00
2.30
0.5
0.6
0.8
0.8
1.0
1.2
1.2
4.0
4.0
5.0
5.0
6.0
6.0
8.0
1.2
1.7
2.0
2.3
2.8
3.7
4.2
8-30
8-30
10-60
10-35
12-80
12-100
16-100
*L ± 1.5 mm recommended increments of even number mm however , any leng h may be specified.
METRIC CHEESE HEAD CAPTIVE PANEL
SCREW ASSEMBLY
Internal Tooth Lock Washer (I)
See page 157 for details
Split Lock Washer (S)
See page 157 for details
ORDER EXAMPLE:
1820 - 8 - SS - S - 12
Basic
Part
Number
Length
in mm
Material:
See chart
Assembly
w/Split (S)
L’Washer
& Flat Washer
Finish:
See page
277
To order Captive Washer only, prefix part number with W. EXAMPLE: W1820
External Tooth Lock Washer (E)
See page 157 for details
ORDER EXAMPLE:
1820 - 8 - SS - I - 12
Basic
Part
Number
Length
in mm
Material:
See chart
Assembly
w/Internal (I)
L’Washer
& Flat Washer
Finish:
See page
277
To order Captive Washer only, prefix part number with W. EXAMPLE: W1820
ORDER EXAMPLE:
1820 - 8 - SS - E - 12
Basic
Part
Number
Length
in mm
Material:
See chart
Assembly
w/External (E)
L’Washer
& Flat Washer
Finish:
See page
277
To order Captive Washer only, prefix part number with W. EXAMPLE: W1820
150
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Fastener after captivation may not accept GO GAGE on last inside thread.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
METRIC CHEESE HEAD CAPTIVE PANEL SCREW ASSEMBLY
Easy One Step Installation Procedure
(typical for all assemblies)
Flare tool supplied by ASM. Countersink 82°
by approximately 1/2 board thickness.
(see page 157)
Specify “I” for
Internal Tooth Lock Washer
Specify “E” for
External Tooth Lock Washer
SCREWS
Specify “S” for
Split Lock Washer
ORDER EXAMPLE:
1820 - 8 - B - SS - E - 1
Basic
Part
Number
Length
in mm
Shank
Code
Material:
See chart
Washer Type:
See page 157
Finish:
See page
277
Any one dimension change add to part number . EXAMPLE: 1820-8-SS-12 (K=4.5)
All dimensions in millimeters
Basic
Part
Number
Thread
and
Pitch
A
Head Dia
Nom
B
Head
Height
1820
1821
1822
1823
1824
1825
1826
M 2 x .4
M 2.5 x .45
M 3 x .5
M 3.5 x .6
M 4 x .7
M 5 x .8
M 6 x 1.0
3.8
4.5
5.5
6.0
7.0
8.5
10.0
1.3
1.6
2.0
2.4
2.6
3.3
3.9
C
Slot Depth
Max
J
Slot Width
Nom
K
± .25 mm
G
± .12 mm
L*
Nom Length
in mm
0.5
0.6
0.8
0.8
1.0
1.2
1.2
4.0
4.0
5.0
5.0
6.0
6.0
8.0
1.2
1.7
2.0
2.3
2.8
3.7
4.2
8-30
8-30
10-60
10-35
12-80
12-100
16-100
.85
1.00
1.30
1.40
1.60
2.00
2.30
*L ±1.5 mm recommended increments of even number mm however , any length may be specified.
Retainer and Flare Tooling Data
All dimensions are in inches.
Thread
Shank
Code
Board
Thickness
R ± .003
A
B
C
D
E
F
1/32
1/16
3/32
1/8
3/16
1/4
.027
.060
.104
.144
.221
.301
1
M 2x.4
M 2.5x.45
M 3x.5
M 3.5x6
M 4x.7
M 5x.8
M 6x1.0
M Dia
Min
Max
.153
.175
.197
.215
.237
.278
.318
.156
.178
.200
.218
.240
.281
.321
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Fastener after captivation may not accept GO GAGE on last inside thread.
Mounting
Hole Dia
+.003 -.000
.156
.178
.200
.218
.240
.281
.321
S
Dia
P
.312
.375
.437
.437
.531
.625
.625
.062
.062
.060
.093
.093
.093
.125
Tooling
Anvil
Punch
MA 2
MA 2.5
MA3
MA 3.5
MA4
MA5
MA6
MP 2
MP 2.5
MP3
MP 3.5
MP4
MP5
MP6
151
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
METRIC CAPTIVE SOCKET HEAD CAP SCREW
For Retainer Washers see page 147.
ORDER EXAMPLE:
1830 - 8 - SS - 12
Basic
Part
Number
Length
in mm
Material:
See chart
Available Material
(see page 275)
Finish:
See page
277
B
S
Any one dimension change add to part number:
EXAMPLE: 1830-8-SS-12 (K=4.5)
SS
Brass, Type M558
ASTM-A-108-93
(12L14) QQ-S-637
Stainless Steel, 18-8
All dimensions are in millimeters.
SCREWS
Basic
Part
Number
Not Avail
Not Avail
1830
Not Avail
1832
1834
1836
1838
Thread
and
Pitch
M 2 x .4
M 2.5 x .45
M 3 x .5
M 3.5 x .6
M 4 x .7
M 5 x .8
M 6 x 1.0
M 8 x 1.25
D
Max
H
Max
K
± .25 mm
–
–
5.5
–
7.0
8.5
10.0
13.0
–
–
3.0
–
4.0
5.0
6.0
8.0
–
–
4.0
–
4.0
4.0
6.0
8.0
B
± .12 mm
L Length*
(even number
mm only)
–
–
2.0
–
2.8
3.7
4.2
6.0
–
–
8-30
–
8-50
8-70
8-120
8-120
*L ±1.5 mm recommended increments of even number mm however , any length may be specified.
METRIC CAPTIVE SOCKET HEAD CAP
SCREW ASSEMBLY
Split Lock Washer (S)
See page 157 for details.
Internal Tooth Lock Washer (I)
See page 157 for details.
ORDER EXAMPLE:
1830 - 8 - SS - S - 12
Basic
Part
Number
Length
in mm
Material:
See chart
Assembly
w/Split (S)
L’Washer
& Flat Washer
Finish:
See page
277
External Tooth Lock Washer (E)
See page 157 for details.
ORDER EXAMPLE:
1830 - 8 - SS - I - 12
Basic
Part
Number
Material:
See chart
Assembly
w/Internal (I)
L’Washer
& Flat Washer
Finish:
See page
277
ORDER EXAMPLE:
1830 - 8 - SS - E - 12
Basic
Part
Number
152
Length
in mm
Length
in mm
Material:
See chart
Assembly
w/External (E)
L’Washer
& Flat Washer
Finish:
See page
277
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Fastener after captivation may not accept GO GAGE on last inside thread.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
METRIC CAPTIVE SOCKET HEAD CAP SCREW ASSEMBLY
Easy One Step Installation Procedure
(typical for all assemblies)
Flare tool supplied by ASM. Countersink 82°
by approximately 1/2 board thickness.
(see page 157 for details)
Specify “I” for
Internal Tooth Lock Washer
Specify “E” for
External Tooth Lock Washer
SCREWS
Specify “S” for
Split Lock Washer
ORDER EXAMPLE:
1830 - 8 - B - SS - E - 12
Basic
Part
Number
Length
in mm
Shank
Code
Material:
See chart
Washer Type:
See page 157
Finish:
See page
277
Screw Available Material
S
ASTM-A-108-93
(12L14) QQ-S-637
Any one dimension change add to part number . EXAMPLE: 1820-8-SS-12 (K=4.5)
SS
All dimensions are in millimeters.
Basic
Part
Number
Thread
and
Pitch
Not Avail
Not Avail
1830
Not Avail
1832
1834
1836
M 2 x .4
M 2.5 x .45
M 3 x .5
M 3.5 x .6
M 4 x .7
M 5 x .8
M 6 x 1.0
D
Max
–
–
5.5
–
7.0
8.5
10.0
H
Max
K
± .25 mm
B
± .12 mm
L Length*
–
–
3.0
–
4.0
5.0
6.0
–
–
4.0
–
4.0
4.0
6.0
–
–
2.0
–
2.8
3.7
4.2
–
–
8-30
–
8-50
8-70
8-120
(even number
mm only)
Stainless Steel, 18-8
Retainer Available Material
B
Brass QQ-B-626 Comp
360 1/2 Hard
ASTMB-16
S ASTM-A-108-93
(12L14) QQ-S-637
SS Stainless Steel
ASTM-A-581,
A582 (Non-Magnetic)
303 series
*L ±1.5 mm recommended increments of even number mm however , any length may be specified.
Retainer and Flare Tooling Data
All Dimensions are in inches.
Thread
Shank
Code
Board
Thickness
R ± .003
A
B
C
D
E
F
1/32
1/16
3/32
1/8
3/16
1/4
.027
.060
.104
.144
.221
.301
1
M2x.4
Not Avail
M2.5x4.5
Not Avail
M3x.5
M3.5x6
Not Avail
M4x.7
M5x.8
M6x1.0
Min
Max
–
–
Mounting
Hole Dia
+.003 -.000
–
–
–
–
.197
–
.200
–
.237
.278
.318
.240
.281
.321
M Dia
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Fastener after captivation may not accept GO GAGE on last inside thread.
S
Dia
P
–
Tooling
Anvil
Punch
–
–
–
–
–
–
–
.200
–
.437
–
.060
–
MA3
–
MP3
–
.240
.281
.321
.531
.625
.625
.093
.093
.125
MA4
MA5
MA6
MP4
MP5
MP6
153
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
METRIC HEX HEAD CAPTIVE MACHINE SCREW
For Retainer Washers see page 147.
ORDER EXAMPLE:
1840 - 10 - SS - 12
Basic
Part
Number
Length
in mm
Material:
See chart
Finish:
See page
277
Slotted Hex Head, add SDS to part number.
EXAMPLE: 1840-10-SS-SDS-12
Available Material
(see page 275)
B
S
SS
Brass, Type M558
ASTM-A-108-93
(12L14) QQ-S-637
Stainless Steel, 18-8
All dimensions are in millimeters.
Basic
Part
Number
SCREWS
Not Avail
Not Avail
1840
Not Avail
1842
1844
1846
Thread
and
Pitch
M 2x.4
M 2.5x.45
M 3x.5
M 3.5x.6
M 4x.7
M 5x.8
M 6x1.0
D
H
Min Max Min Max
–
–
–
–
–
–
–
–
5.32 5.5 1.88 2.21
–
–
–
–
6.78 7.0 2.68 2.92
7.78 8.0 3.35 3.65
9.78 10.0 3.85 4.15
L Length*
K
± .25 mm
B
± .12 mm
(even number
mm only)
–
–
5.0
–
6.0
6.0
8.0
–
–
2.0
–
2.8
3.7
4.2
–
–
10-30
–
12-50
12-60
16-100
*L ±1.5 mm recommended increments of even number mm however , any length may be specified.
METRIC HEX HEAD CAPTIVE MACHINE
SCREW ASSEMBLY
Internal Tooth Lock Washer (I)
See page 157 for details.
Split Lock Washer (S)
See page 157 for details.
ORDER EXAMPLE:
1840 -10 - SS - S - 12
Basic
Part
Number
Length
in mm
Material:
See chart
Assembly
w/Split (S)
L’Washer
& Flat Washer
Finish:
See page
277
External Tooth Lock Washer (E)
See page 157 for details.
ORDER EXAMPLE:
1840 -10 - SS - I - 12
Basic
Part
Number
Material:
See chart
Assembly
w/Internal (I)
L’Washer
& Flat Washer
Finish:
See page
277
ORDER EXAMPLE:
1840 -10 - SS - E - 12
Basic
Part
Number
154
Length
in mm
Length
in mm
Material:
See chart
Assembly
w/External (E)
L’Washer
& Flat Washer
Finish:
See page
277
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Fastener after captivation may not accept GO GAGE on last inside thread.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
METRIC HEX HEAD CAPTIVE MACHINE SCREW ASSEMBLY
Easy One Step Installation Procedure
Typical for all assemblies.
Flare Tool Supplied by ASM. Countersink 82°
by approximately 1/2 board thickness.
(see page 157 for details)
Specify “I” for
Internal Tooth Lock Washer
Specify “E” for
External Tooth Lock Washer
SCREWS
Specify “S” for
Split Lock Washer
ORDER EXAMPLE:
1840 - 10 - B - SS - E - 12
Basic
Part
Number
Length
in mm
Shank
Code
Material:
See chart
Washer Type:
See page 157
Screw Available Material
Finish:
See page
277
S
SS
B
Any one dimension change, add to part number . EXAMPLE: 1840-10-SS-E-1 (K=4.5)
All dimensions are in millimeters
Basic
Part
Number
Not Avail
Not Avail
1840
Not Avail
1842
1844
1846
Thread
and
Pitch
M 2x.4
M 2.5 x .45
M 3 x .5
M 3.5 x .6
M 4 x .7
M 5 x .8
M 6 x 1.0
D
H
Min Max Min Max
–
–
–
–
–
–
–
–
5.32 5.5 1.88 2.21
–
–
–
–
6.78 7.0 2.68 2.92
7.78 8.0 3.35 3.65
9.78 10.0 3.85 4.15
ASTM-A-108-93
(12L14) QQ-S-637
Stainless Steel, 18-8
Brass Type M558
Retainer Available Material
L Length*
K
± .25 mm
B
± .12 mm
(even number
mm only)
–
–
5.0
–
6.0
6.0
8.0
–
–
2.0
–
2.8
3.7
4.2
–
–
10-30
–
12-50
12-60
16-100
B
Brass QQ-B-626 Comp
360 1/2 Hard
ASTMB-16
S ASTM-A-108-93
(12L14) QQ-S-637
SS Stainless Steel
ASTM-A-581,
A582 (Non-Magnetic)
303 series
*L ±1.5 mm recommended increments of even number mm however , any length may be specified.
Retainer and Flare Tooling Data
All dimensions are in inches.
Shank
Code
A
B
C
D
E
F
Board
Thickness
1/32
1/16
3/32
1/8
3/16
1/4
Thread
R1 +.003
.027
.060
.104
.144
.221
.301
M2x.4
Not Avail
M2.5x4.5
Not Avail
M3x.5
M3.5x6
Not Avail
M4x.7
M5x.8
M6x1.0
Min
Max
Mounting
Hole Dia
+.003 -.000
–
–
–
–
–
–
–
.197
.200
–
.237
.278
.318
M Dia
S
Dia
P
Tooling
Anvil
Punch
–
–
–
–
–
–
–
.200
.437
.060
MA3
MP3
–
–
–
–
–
–
.240
.281
.321
.240
.281
.321
.531
.625
.625
.093
.093
.125
MA4
MA5
MA6
MP4
MP5
MP6
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Fastener after captivation may not accept GO GAGE on last inside thread.
155
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
METRIC FLAT HEAD CROSS-RECESSED
CAPTIVE MACHINE SCREW
For Retainer Washers, see page 147.
ORDER EXAMPLE:
1850 - 8 - SS - 12
Basic
Part
Number
Length
in mm
Material:
See chart
Finish:
See page
277
Change any one dimension, add to part number .
EXAMPLE: 1850-8-SS-12 (K=4.5)
SCREWS
Basic
Part
Number
1850
1852
1854
Not Avail
1856
1858
1859
Thread
and
Pitch
M 2x.4
M 2.5x.45
M 3x.5
M 3.5x.6
M 4x.7
M 5x.8
M 6x1.0
D
Head
Dia
3.8
4.7
5.6
–
7.5
9.2
11.0
H
Max
1.2
1.5
1.65
–
2.2
2.5
3.0
K
± .25 mm
B
± .12 mm
4.0
4.0
5.0
–
6.0
6.0
8.0
1.2
1.7
2.0
–
2.8
3.7
4.2
Available Material
(see page 275 )
L*
(even number
mm only)
8-20
8-20
10-50
–
12-80
12-80
16-80
B
S
SS
Brass, Type M558
Carbon Steel
property class 4.8
Stainless Steel, 18-8
All dimensions are in millimeters
*L ±1.5 mm recommended
increments of even number mm
however, any length may be
specified.
METRIC FLAT HEAD SLOTTED
CAPTIVE MACHINE SCREW
Available Material (see page 275)
B
S
SS
Brass, Type M558
Carbon Steel property class 4.8
Stainless Steel, 18-8
ORDER EXAMPLE:
1860 - 8 - SS - 12
Basic
Part
Number
Length
in mm
Material:
See chart
Finish:
See page
277
Change any one dimension, add to part number .
EXAMPLE: 1860-8-SS-12 (K=4.5)
All dimensions are in millimeters.
Basic
Part
Number
Thread
and
Pitch
D
Head
Dia
H
Max
J
Slot Width
Nom
T
Slot Depth
Max
K
± .25
B
± .12
1860
1862
1864
Not Avail
1866
1868
1869
M 2x.4
M 2.5x.45
M 3x.5
M 3.5x.6
M 4x.7
M 5x.8
M 6x1.0
3.8
4.7
5.5
–
8.4
9.3
11.3
1.2
1.5
1.65
–
2.7
2.7
3.3
0.5
0.6
0.8
–
1.2
1.2
1.6
0.6
0.75
0.85
–
1.3
1.4
1.6
4.0
4.0
5.0
–
6.0
6.0
8.0
1.2
1.7
2.0
–
2.8
3.7
4.2
L*
(even number
mm only)
8-30
8-30
10-50
–
12-80
12-80
16-80
*L ±1.5 mm recommended increments of even number mm however , any length may be specified.
156
NOTE: Standard fastener products having a class 2A thread, once plated, may not exit GO GAGE.
Fastener after captivation may not accept GO GAGE on last inside thread.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
ORDER EXAMPLE:
903133 - S - 32
LOCK WASHERS
Internal Tooth Lock Washers
Basic
Part Number
American Standard Available Material (see page 275)
S Spring Steel HRC 42-47
SS Stainless Steel, Type 304
B Phosphorus Bronze conforming to
ASM B159 Copper Alloy No. 510
Basic
Part
Number
903133
903135
903137
903139
903141
903143
903145
903147
903149
Normal
Washer
Size
2
4
6
8
10
1/4
5/16
3/8
7/16
A
OD
Min
.175
.255
.275
.325
.365
.460
.594
.670
.740
Metric Available Material (see page 275)
Min
.089
.115
.141
.168
.195
.256
.320
.384
.448
STANDARD
Finish:
See page 277
METRIC
B
ID
Max
.200
.270
.295
.340
.381
.478
.610
.694
.789
Material:
See chart
C
Thickness
Min
Max
.010
.015
.015
.019
.017
.021
.018
.023
.020
.025
.023
.028
.028
.034
.032
.040
.032
.040
Max
.095
.123
.150
.176
.204
.267
.332
.398
.464
S
SS
Basic
Part
Number
903180
903181
903183
903184
903185
903186
903187
Normal
Washer
Size
M2
M2.5
M3
M3.5
M4
M5
M6
Spring Steel HRC 42-47
Stainless Steel, Type 304
B
ID
A
OD
Min
4.40
5.35
6.85
7.55
8.25
10.00
12.20
Max
4.70
5.45
7.35
8.05
8.75
10.50
12.95
Min
2.25
2.65
3.15
3.65
4.15
5.15
6.20
Max
2.40
2.80
3.30
3.80
4.30
5.30
6.50
C
Thickness
Min
Max
.25
.35
.25
.35
.35
.50
.40
.55
.45
.60
.55
.70
.55
.70
External Tooth Lock Washers
SCREWS
STANDARD
American Standard Available Material (see page 275)
S Spring Steel HRC 42-47
SS Stainless Steel, Type 304
B Phosphorus Bronze conforming to
ASM B159 Copper Alloy No. 510
Basic
Part
Number
Normal
Washer
Size
Not Avail.
903132
903134
903136
903138
903140
903142
903144
903146
903148
2
4
6
8
10
12
1/4
5/16
3/8
7/16
Metric Available Material (see page 275)
B
ID
A
OD
Min
–
.245
.305
.365
.395
.460
.494
.588
.670
.740
METRIC
Max
–
.260
.320
.381
.410
.475
.510
.610
.694
.760
Min
–
.115
.141
.168
.195
.221
.256
.320
.384
.448
C
Thickness
Min
Max
–
–
.015
.019
.016
.022
.018
.023
.020
.025
.023
.028
.023
.028
.028
.034
.032
.040
.032
.040
Max
–
.123
.150
.176
.204
.231
.267
.332
.398
.464
S
SS
Basic
Part
Number
903188
903189
903190
903191
903192
903193
903194
Spring Steel HRC 42-47
Stainless Steel, Type 304
Normal
A
Washer
OD
Size
Min
Max
M2
–
–
M2.5
5.45
5.85
M3
6.85
7.35
M3.5
7.55
8.05
M4
8.50
9.00
M5
10.00 10.50
M6
12.20 12.95
B
ID
Min
2.25
2.65
3.15
3.65
4.15
5.15
6.20
Max
2.40
2.80
3.30
3.80
4.30
5.30
6.50
C
Thickness
Min
Max
.25
.35
.25
.35
.35
.50
.40
.55
.45
.60
.50
.65
.55
.70
Split Lock Washers
STANDARD
American Standard Available Material (see page 275)
S Steel (1008)
SS Stainless Steel (18-8)
B Silicone Bronze conforming to
ASM B99 Copper Alloy 651 or 655
Basic
Part
Number
Normal
Washer
Size
903150
903152
903154
903156
903158
903160
903162
903164
903166
903168
903170
2
4
5
6
8
10
12
1/4
5/16
3/8
7/16
A
OD
Max2
.172
.209
.236
.250
.293
.334
.377
.489
.586
.683
.779
B
ID
Min
.088
.115
.128
.141
.168
.194
.221
.255
.318
.382
.446
Max
.094
.121
.134
.148
.175
.202
.229
.263
.328
.393
.459
METRIC
Metric Available Material (see page 275)
W
C
Washer Section
Width*
Thickness
Approx.
.035
.040
.047
.047
.055
.062
.070
.109
.125
.141
.156
.020
.025
.031
.031
.040
.047
.056
.062
.078
.094
.109
*American Standard washer width is a pproximate.
S
SS
Basic
Part
Number
903195
903196
903197
903198
903199
903200
903201
Spring Steel HRC 44-51
Stainless Steel, Type 304 or 316
Screw
Dia
A
OD
B
ID
C
Thickness
M2
M2.5
M3
M3.5
M4
M5
M6
4.4
5.1
6.2
6.7
7.6
9.2
11.8
2.1
2.6
3.1
3.6
4.1
5.1
6.1
.5
.6
.8
.8
.9
1.2
1.6
157
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
SLOTTED HEAD SHOULDER SCREW
ORDER EXAMPLE:
17000 - SS - 12 - SLD
Basic
Part
Number
Basic
Part
Number
SCREWS
158
17000 1/8
17002
17004
17006
17008
17012
17009
17169
17170
17171
17172
17011
17013
17015
17017
17001
17027
17029
17003
17033
17035
17037
17173
17174
17175
17176
17010
17005
17014
17016
17018
17019
17020
17021
17022
17023
17024
17025
Material:
See chart
Finish:
See page
277
Self-Locking
Device Option:
See page 109
C
A
B
+.000
-.001
+.002
-.000
1/8
.1245
5/32
.1562
3/16
.1870
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1
1-1/4
1-1/2
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
.1250
.1875
.2500
.3125
.3750
.4370
.5000
.6250
.7500
.8750
1.0000
.1250
.1875
.2500
.3125
.3750
.4375
.5000
.5625
.6250
.6875
.7500
.8750
1.0000
1.2500
1.5000
.1250
.1875
.2500
.3125
.3750
.4370
.5000
.5625
.6250
.6875
.7500
.8750
D
E
F
Available Material (see page 275)
A
B
N*
S
SS
D*
Aluminum
Brass
Nylon
Steel
Stainless Steel
Delrin
*Nylon and Delrin tolerance A and B = ± .002
1/4
#4-40
5/32
Screw Driver Slot
G +.015
W +.015
.062
.062
1/8
9/32
!
#6-32
3/16
5/16
5/32
TECH
TIP
Tolerances on
fractions are
larger than
tolerances
on decimals.
#8-32
NOTE: This product also available with the Self-Locking Device, see page 109.
Tolerance A & B +.005 unless otherwise specified.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
SLOTTED HEAD SHOULDER SCREW
ORDER EXAMPLE:
17026 - SS - 12 - SLD
Basic
Part
Number
17026
17028
17031
17030
17177
17178
17180
17032
17034
17036
17038
17040
17041
17042
17043
17044
17045
17046
17047
17048
17050
17051
17052
17181
17182
17183
17054
17100
17056
17102
17058
17104
17060
17106
17061
17108
17062
17110
Material:
See chart
Finish:
See page
277
Self-Locking
Device Option:
See page 109
A
B
+.000
-.001
+.002
-.000
3/16
.1870
1/4
.2495
5/16
.3120
1
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
2
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
2
1.0000
1.2500
1.375
1.5000
1.6250
1.7500
2.0000
.1250
.1875
.2500
.3125
.3750
.4370
.5000
.5625
.6250
.6875
.7500
.8750
1.0000
1.2500
1.375
1.5000
1.6250
1.7500
2.0000
.2505
.2505
.3125
.3125
.3750
.3750
.5000
.5000
.5625
.5625
.6250
.6250
C
D
E
F
5/16
5/32
#8-32
3/16
Available Material (see page 275)
A
B
N*
S
SS
D*
Aluminum
Brass
Nylon
Steel
Stainless Steel
Delrin
*Nylon and Delrin tolerance A and B = ± .002
Screw Driver Slot
G +.015
W +.015
.062
3/8
3/16
#10-32
1/4
SCREWS
Basic
Part
Number
!
.062
TECH
TIP
Straight or
diamond knurl
can be applied
to most screw
head styles.
1/2
7/16
1/2
7/16
1/2
7/16
1/2
7/16
1/2
7/16
1/2
7/16
NOTE: This product also available with the Self-Locking Device, see page 109.
Tolerance A & B +.005 unless otherwise specified.
7/32
1/4-20
7/16
3/8
7/16
3/8
7/16
3/8
7/16
3/8
7/16
3/8
7/16
3/8
159
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
SLOTTED HEAD SHOULDER SCREW
ORDER EXAMPLE:
17063 - SS - 12 - SLD
Basic
Part
Number
SCREWS
160
Basic
Part
Number
17063
17112
17064
17114
17065
17116
17089
17118
17184
17185
17186
17187
17066
17068
17122
17070
17124
17071
17126
17072 .625
17128
17073
17130
17057
17132
17090
17134
17091
17136
17188
17189
17190
17191
17074
17076
17140
17078
17142
Material:
See chart
Finish:
See page
277
A
B
+.000
-.001
+.002
-.000
5/16
.3120
3/8
.3745
Self-Locking
Device Option:
See page 109
.6875
.6875
.7500
.7500
.8750
.8750
1.0000
1.0000
1.2500
1.5000
1.7500
2.0000
.3125
.3750
.3750
.5000
.5000
.5625
.5625
.6250
.6875
.6875
.7500
.7500
.8750
.8750
1.0000
1.0000
1.2500
1.5000
1.7500
2.0000
.3125
.3750
.3750
.5000
.5000
C
1/2
7/16
1/2
7/16
1/2
7/16
1/2
7/16
1/2
7/16
1/2
7/16
D
E
7/32
1/4-20
1/2
7/32
1/4-20
9/16
9/16
1/2
9/16
1/2
1/4
1/4
7/32
1/4
7/32
5/16-18
F
7/16
3/8
7/16
3/8
7/16
3/8
7/16
3/8
7/16
3/8
7/16
3/8
7/16
7/16
3/8
7/16
3/8
7/16
3/8
7/16
3/8
7/16
3/8
7/16
3/8
7/16
3/8
7/16
3/8
3/8
3/8
3/8
3/8
1/2
1/2
7/16
1/2
7/16
Available Material (see page 275)
A
B
N*
S
SS
D*
Aluminum
Brass
Nylon
Steel
Stainless Steel
Delrin
*Nylon and Delrin tolerance A and B = ± .002
Screw Driver Slot
G +.015
W +.015
.062
!
.062
TECH
TIP
Our new in-house
passivation
process, certified
to QQP35CAMS2700B-MIL F
14072D, further
improves our lead
times.
NOTE: This product also available with the Self-Locking Device, see page 109.
Tolerance +.005 unless otherwise specified.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
SLOTTED HEAD SHOULDER SCREW
ORDER EXAMPLE:
17079 - SS - 12 - SLD
Basic
Part
Number
17079
17144
17080
17146
17081
17148
17092
17150
17093
17152
17094
17151
17192
17193
17194
17195
17153
17154
17155
17082
17156
17083
17158
17084
17160
17085
17162
17086
17164
17087
17166
17088
17168
17196
17197
17198
17199
Material:
See chart
Finish:
See page
277
A
B
+.000
-.001
+.002
-.000
3/8
.3745
1/2
.4995
Self-Locking
Device Option:
See page 109
.5625
.5625
.6250
.6250
.6875
.6875
.7500
.7500
.8750
.8750
1.0000
1.0000
1.250
1.500
1.750
2.0000
.2500
.3125
.3750
.5000
.5000
.5625
.5625
.6250
.6250
.6875
.6875
.7500
.7500
.8750
.8750
1.0000
1.0000
1.2500
1.5000
1.7500
2.0000
C
D
9/16
1/2
9/16
1/2
9/16
1/2
9/16
1/2
9/16
1/2
9/16
1/2
9/16
1/2
9/16
1/2
5/8
5/8
5/8
3/4
5/8
3/4
5/8
3/4
5/8
3/4
5/8
3/4
5/8
3/4
5/8
3/4
5/8
3/4
5/8
3/4
5/8
1/4
7/32
1/4
7/32
1/4
7/32
1/4
7/32
1/4
7/32
1/4
7/32
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
1/4
5/16
1/4
5/16
1/4
5/16
1/4
5/16
1/4
5/16
1/4
5/16
1/4
1/4
1/4
1/4
1/4
NOTE: This product also available with the Self-Locking Device, see page 109.
Tolerance +.005 unless otherwise specified.
E
5/16-18
3/8-16
F
1/2
7/16
1/2
7/16
1/2
7/16
1/2
7/16
1/2
7/16
1/2
7/16
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
1/2
5/8
1/2
5/8
1/2
5/8
1/2
5/8
1/2
5/8
1/2
5/8
1/2
1/2
1/2
1/2
1/2
Available Material (see page 275)
A
B
N*
S
SS
D*
Aluminum
Brass
Nylon
Steel
Stainless Steel
Delrin
SCREWS
Basic
Part
Number
*Nylon and Delrin tolerance A and B = ± .002
Screw Driver Slot
G +.015
W +.015
.062
!
.062
TECH
TIP
Galling is often
referred to as
cold welding.
This occurs when
the surfaces of
male and female
threads come in
contact with
heavy pressure.
Stainless steel
fasteners are
more susceptible
to thread galling,
which also
occurs with
other alloys.
161
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
SOCKET HEAD SHOULDER SCREW
Available Material
(see page 275)
A
B
N*
S
SS
D*
*Nylon and Delrin tolerance
A and B = ± .002
Available with Self-Locking Device, see page 109
ORDER EXAMPLE:
LP - 67501 - SS - 12 - SLD
ORDER EXAMPLE:
67501 - SS - 12 - SLD
Material:
See chart
Basic
Part
Number
SCREWS
Basic
Part
Number
67501
67503
67505
67507
67509
67511
67513
67515
67517
67519
67521
67523
67525
67527
67529
67531
67533
67535
67537
67538
67540
67542
67544
67546
67548
67550
67552
67554
67556
67558
67560
67562
67564
67566
162
A
+.002
-.000
.1250
.1875
.2500
.3125
.3750
.4375
.5000
.1250
.1875
.2500
.3125
.3750
.4375
.5000
.5625
.6250
.6875
.7500
.1250
.1875
.2500
.3125
.3750
.4375
.5000
.5625
.6250
.6875
.7500
.8750
1.0000
1.2500
1.3750
1.5000
Finish:
See page
277
Aluminum
Brass
Nylon
Steel
Stainless Steel
Delrin
Low Profile
Self-Locking
Device Option:
See page 109
Material:
See chart
Basic
Part
Number
C
Self-Locking
Device Option:
See page 109
G
Min Nominal
Low
Std
Profile
D
B
Thread
+.004
+.000
-.001
Std
Low
Profile
4-40
1/4
.1245
1/8
3/32
5/32
5/64
1/16
1/32
6-32
9/32
.1560
1/8
5/64
3/16
3/32
5/64
1/32
8-32
5/16
.1870
5/32
7/64
3/16
3/32
5/64
1/32
E
+.010
F
Finish:
See page
277
+.005
NOTE: Low Profile is not recommended for high torque installation.
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
SOCKET HEAD SHOULDER SCREW
67568
67570
67572
67574
67576
67578
67580
67582
67584
67586
67588
67590
67592
67594
67596
67598
67600
67602
67604
67606
67608
67610
67612
67614
67616
67618
67620
67622
67624
67626
67628
67630
67632
67634
67636
67638
67640
67642
67644
67646
67648
67650
67652
67654
67656
67658
67660
67662
A
+.002
-.000
.1250
.1875
.2500
.3125
.3750
.4375
.5000
.5625
.6250
.6875
.7500
.8750
1.0000
1.2500
1.3750
1.5000
.2500
.3125
.3750
.5000
.6250
.7500
.8750
1.0000
.2500
.3125
.3750
.5000
.6250
.7500
.8750
1.0000
.2500
.3125
.3750
.5000
.6250
.7500
.8750
1.0000
.2500
.3125
.3750
.5000
.6250
.7500
.8750
1.0000
C
F
G
Min Nominal
Low
Std
Profile
1/4
1/8
3/32
1/32
1/8
3/8
5/32
1/8
1/32
7/32
1/8
3/8
5/32
1/8
1/32
.3745
7/32
3/32
7/16
3/16
5/32
1/32
.4995
1/4
3/32
1/2
1/4
3/16
1/32
D
B
Thread
+.004
+.000
-.001
Std
Low
Profile
10-32
3/8
.2495
3/16
1/8
1/4-20
7/16
.3120
7/32
1/4-20
1/2
.3745
5/16-18
1/2
3/8-16
5/8
E
+.010
+.005
SCREWS
Basic
Part
Number
NOTE: Low Profile is not recommended for high torque installation.
163
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
MALE/FEMALE SHOULDER SCREW
Thread
B
A
Thread
B
A
2-56
4-40
6-32
8-32
10-24
3/16
1/4
3/8
7/16
1/2
5/32
3/16
1/4
3/8
3/8
10-32
12-24
1/4-20
5/16-18
3/8-16
1/2
1/2
1/2
1/2
1/2
3/8
3/8
3/8
3/8
3/8
ORDER EXAMPLE:
16500 - H - SS - .500 - 12
When L dimension is equal to
or smaller than A, the depth
will be maximum possible or
a minimum of 1-1/2 threads,
whichever is greater.
Basic
Part
Number
Hex (H),
Round (R) or
Square (S)
Material:
See chart
Length:
Fill in length,
any increment
Finish:
See page
277
*If any dimension, tolerance, thread, etc. changes are required, add he requirement
to the end of the part number . EXAMPLE: 16592H-SS-.500-12 (E=3/32)
Self-locking device (page 109) may be added to male thread.
Add SLD to part number. EXAMPLE: 16592 H-SS-.500-12-SLD
SCREWS
164
D*
Thread
C*
+.000
-.002
3/16
4-40
.124
1/4
6-32
.156
5/16
8-32
.187
3/8
10-32
.249
+.003
-.000
E*
Basic
Part
Number
1/8
3/16
1/4
3/8
7/16
1/2
1/8
3/16
1/4
3/8
7/16
1/2
9/16
5/8
11/16
3/4
1/8
3/16
1/4
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1
1-1/4
1-3/8
1-1/2
1/8
3/16
1/4
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
16500
16502
16504
16506
16508
16510
16512
16514
16516
16518
16520
16522
16524
16526
16528
16530
16532
16534
16536
16538
16540
16542
16544
16546
16548
16550
16552
16554
16556
16558
16560
16562
16564
16566
16568
16570
16572
16574
16576
16578
16580
16582
D*
3/8
Thread
C*
+.000
-.002
10-32
.249
1/2
1/4-20
.312
1/2
5/16-18
.374
5/8
3/8-16
.499
Available Material
(see page 275)
A
B
S
SS
N
D
C
T
E*
Aluminum
Brass
Steel
Stainless Steel
Nylon
Delrin
Copper
Teflon
+.003
-.000
Basic
Part
Number
1
1-1/4
1-3/8
1-1/2
1/8
3/16
1/4
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1
1-1/4
1-3/8
1-1/2
3/8
7/16
1/2
9/16
5/8
11/16
3/4
1
1-1/4
1-3/8
1-1/2
3/8
7/16
1/2
9/16
5/8
11/16
3/4
1
1-1/4
1-3/8
1-1/2
16584
16586
16588
16590
16592
16594
16596
16598
16600
16602
16604
16606
16608
16610
16612
16614
16616
16618
16620
16622
16624
16626
16628
16630
16632
16634
16636
16638
16640
16642
16644
16646
16648
16650
16652
16654
16656
16658
16660
16662
16664
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
PUSHER TYPE THUMB SCREW
Full Thread
Available Material (see page 275)
SOFT TOUCH PARTS
Aluminum
Brass
Steel
Stainless Steel
ORDER EXAMPLE:
900 - A - 22
Basic
Part
Number
Material:
See chart
Finish:
See page 277
Screw driver slot is available (see page 281 for dimensions).
Add SDS to part number. EXAMPLE: 900-A-SDS-22
*Any one dimension may be changed by adding to part number .
EXAMPLE: 900-A-22 (E = .350)
Basic
Part No.
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
Thread
4-40
6-32
8-32
A*
E
D
C
+.010
+.015
+.015
+.020
-.000
3/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
3/16
When inserted, these pellets provide the
perfect “soft touch” to prevent marring or
scratching often caused by metal-to-metal
contact. The pellet gives full face contact
with a curved shaft. To order soft touch
just add ST to the part number.
(see page 109)
EXAMPLE: 900-A-22-ST
Material: Nylon LP - 410 Natural
See page 276 for sizes.
Basic
Part No.
936
937
938
939
940
941
942
943
944
946
948
950
952
954
956
958
960
962
964
966
968
970
972
974
976
978
980
982
984
986
988
990
992
994
996
998
Thread
10-24
10-32
1/4-20
Soft Touch parts a vailable.
A*
E
D
C
+.010
+.015
+.015
+.020
-.000
1/2
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
SCREWS
A
B
S
SS
1/4
5/16
165
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
PUSHER TYPE THUMB SCREW
Captive Thread
Available Material (see page 275)
A
B
S
SS
SOFT TOUCH PARTS
Aluminum
Brass
Steel
Stainless Steel
ORDER EXAMPLE:
C900 - A - 22
Basic
Part
Number
SCREWS
166
Material:
See chart
Finish:
See page 277
Screw driver slot is available (see page 281 for dimensions).
Add SDS to part number. EXAMPLE: C900-A-SDS-22
*Any one dimension may be changed by adding to part number .
EXAMPLE: C900-A-22 (K = 1/4)
Basic Thread
Part
No.
+.010
C900
C901
C902
C903
C904
C905
C906
C907
C908
C909
C910
C911
C912
C913
C914
C915
C916
C917
C918
C919
C920
C921
C922
C923
C924
C925
C926
C927
C928
C929
C930
C931
C932
C933
C934
C935
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
4-40
6-32
8-32
A
E
D
+.015
+.015
3/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
C
+.020
-.000
3/16
K*
+.010
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
When inserted, these pellets provide the
perfect “soft touch” to prevent marring or
scratching often caused by metal-to-metal
contact. The pellet gives full face contact
with a curved shaft. To order soft touch
just add ST to the part number.
(see page 109)
EXAMPLE: C900-A-22-ST
Material: Nylon LP - 410 Natural
See page 275 for sizes.
G
+.015
.078
.095
.120
Basic Thread
Part
No.
A
+.010
C936
5/8
C937
3/4
C938
7/8
C939
1
C940
1-1/8
C941 10-24 1-1/4
C942
1-3/8
C943
1-1/2
C944
1-5/8
C946
1-3/4
C948
1-7/8
C950
2
C952
5/8
C954
3/4
C956
7/8
C958
1
C960
1-1/8
C962 10-32 1-1/4
C964
1-3/8
C966
1-1/2
C968
1-5/8
C970
1-3/4
C972
1-7/8
C974
2
C976
5/8
C978
3/4
C980
7/8
C982
1
C984
1-1/8
C986
1-1/4
C988 1/4-20 1-3/8
C990
1-1/2
C992
1-5/8
C994
1-3/4
C996
1-7/8
C998
2
Soft Touch parts a vailable.
E
D
+.015
+.015
1/2
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
C
+.020
-.000
1/4
5/16
K*
+.010
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
G
+.015
.130
.175
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
THUMB SCREW
(see page 109)
ORDER EXAMPLE:
18000 - A - 1
Basic
Part
Number
Material:
See chart
Finish:
See page
277
Screw driver slot is available, add SDS to part number. (For slot
dimensions see page 281.) EXAMPLE: 18000-A-SDS-1
*Any one dimension may be changed, by adding to
part number. EXAMPLE: 18000-A-1 (A-1/2)
Basic
Part
No.
18000
18002
18004
18006
18008
18010
18012
18014
Thread
4-40
4-40
4-40
6-32
6-32
6-32
8-32
8-32
A*
B*
C*
+.020
-.000
+.015
+.015
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
5/8
11/16
3/4
11/16
3/4
13/16
11/16
13/16
!
When inserted, these pellets provide the
perfect “soft touch” to prevent marring or
scratching often caused by metal-to-metal
contact. The pellet gives full face contact
with a curved shaft. To order soft touch
just add ST to the part number.
EXAMPLE: 18000-A-1-ST
Material: Nylon LP - 410 Natural
See page 276 for sizes.
D*
+.010
5/16
3/8
7/16
3/8
7/16
1/2
3/8
1/2
Basic
Part
No.
18016
18018
18020
18022
18024
18026
18028
18030
SCREWS
SOFT TOUCH PARTS
Available Material (see page 275)
B
N*
S
SS
D*
Brass
Nylon
Steel
Stainless Steel
Delrin
*Knurl is less pronounced than with
metallic knurling. See page 187 for
knurled nylon thumb screws.
A*
B*
C*
Thread
+.020
-.000
+.015
+.015
8-32
10-32
10-32
10-32
1/4-20
1/4-20
1/4-20
1/4-20
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
15/16
11/16
13/16
15/16
3/4
7/8
1
1-1/8
D*
+.010
5/8
3/8
1/2
5/8
3/8
1/2
5/8
3/4
TECH TIP
Some finishes will change the major and pitch
diameter of the class 2A exter nal threads. If
required, allowances can be made to ensur e the
parts maintain the correct major and pitch diameter.
167
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
PUSHER TYPE THUMB SCREW
See page 187 for molded thumb screws.
SOFT TOUCH
PARTS
Full Thread
When inserted, these
pellets provide the perfect
“soft touch” to prevent
marring or scratching often
caused by metal-to-metal
contact. The pellet gives
full face contact with a
curved shaft. To order soft
touch just add ST to the
part number.
(see page 109)
SCREWS
ORDER EXAMPLE:
18040 - A - 22
Basic
Part
Number
Material:
See chart
Captive Thread
EXAMPLE: 18040-A-22-ST
Material: Nylon LP - 410 Natural
See page 276 for sizes.
(see page 109)
ORDER EXAMPLE:
C18040 - A - 22
Available Material (see page 275)
Finish:
See page
277
Screw Driver Slot Option - add SDS to part number
EXAMPLE: 18040-A-SDS-22
Change any dimension, add changes to end of part number .
EXAMPLE: 18040-A -22 (A=1/2)
A
B
N**
S
SS
D**
Aluminum
Brass
Nylon
Steel
Stainless Steel
Delrin
Basic
Part
Number
Material:
See chart
Finish:
See page
277
Change any dimension, add changes to end of part number .
EXAMPLE: C18040-A-22 (K=1/8)
**Knurl is less pronounced than metallic knurling.
Basic
A
Part Thread
+.020
Number
18040
18042
18044
18046
18048
18050
18052
18054
18056
18058
18060
18062
18064
18066
18068
18070
18072
18074
18076
18078
18080
18082
18084
18090
168
B
C
D
+.015
+.015
+.015
4-40
5/16
6-32
3/16
8-32
3/8
10-32 7/16
1/4-20
1/2
1/4
1/2
5/16
9/16
3/8
5/8
7/16
11/16
1/2
1/2
5/16
9/16
3/8
5/8
7/16
11/16
1/2
9/16
3/8
5/8
7/16
11/16
1/2
3/4
9/16
13/16
5/8
9/16
3/8
5/8
7/16
11/16
1/2
3/4
9/16
13/16
5/8
3/4
1/2
13/16
9/16
7/8
5/8
15/16 11/16
1
3/4
2-3/4 2-1/2
Basic Part
A
Thread
Number
+.020
C18040
C18042
C18044
C18046
C18048
C18050
C18052
C18054
C18056
C18058
C18060
C18062
C18064
C18066
C18068
C18070
C18072
C18074
C18076
C18078
C18080
C18082
C18084
C18090
B
C
D
K
G
+.015
+.015
+.015
+.010
+.005
1/2
9/16
5/8
11/16
1/2
9/16
5/8
11/16
9/16
5/8
11/16
3/4
13/16
9/16
5/8
11/16
3/4
13/16
3/4
13/16
7/8
15/16
1
2-3/4
5/16
3/8
7/16
1/2
5/16
3/8
7/16
1/2
3/8
7/16
1/2
9/16
5/8
3/8
7/16
1/2
9/16
5/8
1/2
9/16
5/8
11/16
3/4
2-1/2
5/32
3/16
7/32
1/4
5/32
3/16
7/32
1/4
3/16
7/32
1/4
9/32
5/16
3/16
7/32
1/4
9/32
5/16
1/4
9/32
5/16
11/32
3/8
1-1/4
4-40
5/16
6-32
3/16
8-32
3/8
10-32 7/16
1/4-20
1/2
1/4
.078
.095
.120
.130
.175
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
KNURLED THUMB SCREW
See page 187 for molded thumb screws.
ORDER EXAMPLE:
901700 - A - 1
Material:
See chart
A
B
N**
S
SS
D**
Finish:
See page
277
Any dimension may be changed by adding to part number .
EXAMPLE: 901700-A-1 (D = 1/2)
Basic
Part
No.
901700
901702
901704
901706
901708
901710
901712
901714
901718
901720
901722
901724
901726
901728
901730
A
Thread
4-40
6-32
8-32
B
D
E
1/4
1/4
1/4
3/8
3/8
1/4
1/4
1/4
3/8
3/8
1/4
1/4
1/4
3/8
3/8
1/8
1/2
1/2
1/8
1/8
1/2
1/2
1/2
1/8
1/8
1/2
1/2
1/2
1/8
1/8
5/16
7/16
5/8
5/16
7/16
7/16
5/8
13/16
5/16
3/8
7/16
5/8
13/16
5/16
3/8
L
Aluminum
Brass
Nylon
Steel
Stainless Steel
Delrin
**Knurl is less pronounced han metallic knurling.
Lgth
Basic
Part
No.
A
3/8
1/2
3/4
3/8
1/2
1/2
3/4
1
3/8
1/2
1/2
3/4
1
3/8
1/2
901732
901734
901736
901738
10-24
901740
901742
901744
901746
901748
901750
901752
901754 10-32
901756
901758
901760
Thread
B
D
E
3/8
3/8
3/8
1/2
1/2
1/2
1/2
3/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
7/16
5/8
13/16
5/8
13/16
1
1-1/4
5/8
7/16
5/8
13/16
1
5/8
13/16
1
Lgth
L
Basic
Part
No.
A
1/2
3/4
1
3/4
1
1-1/4
1-1/2
3/4
1/2
3/4
1
1-1/4
3/4
1
1-1/4
901762
901764
901766 10-32
901768
901770
901772
901774
901776
901778
901780
1/4-20
901782
901784
901786
901788
901790
Thread
B
D
E
1/2
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1-1/4
5/8
13/16
1
1-1/4
5/8
13/16
1
1-1/4
1-5/8
5/8
13/16
1
1-1/4
1-5/8
L
Lgth
1-1/2
3/4
1
1-1/4
1-1/2
3/4
1
1-1/4
1-1/2
2
3/4
1
1-1/4
1-1/2
2
SCREWS
Basic
Part
Number
Available Material (see page 275)
KNURLED JACK SCREW
ORDER EXAMPLE:
68001 - A - 1
Basic
Part
Number
Material:
See chart
Finish:
See page
277
Any dimension may be changed by adding to part number .
EXAMPLE: 68001-A-22 (B = 5/8)
Part
Number
68001
68003
68005
68007
68009
68011
68013
68015
68017
68019
A
Thread
4-40
4-40
6-32
6-32
8-32
8-32
10-32
10-32
1/4-20
1/4-20
B
C
D
1/4
3/8
1/4
3/8
1/4
1/4
1/2
3/4
3/4
1
1/8
1/8
1/8
1/8
1/8
1/8
1/4
1/4
1/4
1/4
1/8
1/4
1/8
1/4
1/8
1/4
1/4
1/4
3/8
3/8
L
Lgth
1/2
3/4
3/4
1
3/4
1
1
1-1/4
1-1/4
1-1/2
Part
Number
68021
68023
68025
68027
68029
68031
68033
68035
68037
68039
A
Thread
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
B
C
D
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-3/8
1-3/8
1-3/8
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
L
Lgth
1-1/4
1-5/8
2
1-1/4
1-5/8
2
2-1/2
1-5/8
2
2-1/2
Available Material (see page 275)
A
B
S
SS
Aluminum
Brass
Steel
Stainless Steel
169
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
THUMB SCREW
Shoulder Type
FLAT POINT
~•~
SCREWS
FLAT
F
ORDER EXAMPLE:
900005 - S - F - 7
Material:
Steel
Basic
Part
Number
Flat
Point
Finish*:
See page
277
*The Cadmium Plate Finish (7) is recommended for Steel.
Thread
Size
6-32
8-32
10-32
1/4-20
5/16-18
3/8-16
C
Head Width
D
Head Height
Max.
Min.
Max.
Min.
Max.
Min.
0.31
0.36
0.42
0.55
0.70
0.83
0.29
0.34
0.40
0.52
0.67
0.80
0.33
0.38
0.48
0.64
0.78
0.95
0.31
0.36
0.46
0.61
0.75
0.92
0.25
0.31
0.35
0.47
0.59
0.76
0.23
0.29
0.32
0.44
0.56
0.71
Approximate dimensions are for reference only.
!
170
E
Shoulder Dia.
Basic
Part Number
Thread
L
Length
900005*
900009*
900011
900015*
900019*
900021
900025*
900029*
900031*
900030*
900032*
900034
900036
900041*
900043*
900047*
900049*
900053*
900055*
900057*
900059
900061*
900063
900065
900067
900069*
900071*
900073
900075*
900077*
900079
900081
6-32
6-32
6-32
8-32
8-32
8-32
10-24
10-24
10-24
10-32
10-32
10-32
10-32
1/4-20
1/4-20
1-4/20
1/4-20
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
1/2
3/4
1
1/2
3/4
1
1/2
3/4
1
3/4
1
1-1/2
2
3/4
1
1-1/2
2
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3/4
1
1-1/4
1-1/2
2
2-1/2
3
Material
*Shoulder Type Only. Shoulder Type Thumb Screws with Standard Coarse
Threaded and Flat Point in Steel are carried in stock. All others are approximately
14-16 weeks delivery and 5,000 minimum order .
TECH TIP
Don’t have a 3D CAD softwae package or viewer?
Not a problem! You can view our parts fr om
www.accuratescrew.com in 3D right in your web
browser (Internet Explorer only)!
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
CAPTIVE THUMB SCREW WITH KNOBS
Knobs Are Pressed On Securely - They Won’t Come off
Knob
(see below)
Assembled
Screw
(see below)
Length:
See chart
Basic
Part
Number
Material:
See chart
Knob Code:
Knurled (K),
Rosette (R)
or Tee (T)
Knob Color:
See chart
SCREWS
ORDER EXAMPLE:
114116 - .500 - SS - K - BL - 12
Finish:
See page
277
Select knob and screw from charts.
Select SCREW From Charts Below
Screw
Part No.
114114
114116
114118
114120
114121
114111
114113
114115
Material For Captive
Thumb Screws Specifications
(see page 275)
S
SS
Heat Treated Alloy Steel
Stainless Steel 18-8
K
B
Thread
Increments of 1/16
+.010
+.005
4-40
6-32
8-32
10-32
1/4-20
1/4-28
5/16-18
3/8-16
.250-.625
.375-1.250
.375-1.250
.375-1.500
.375-3.000
.375-3.000
.500-3.500
.500-5.000
5/32
3/16
3/16
1/4
1/4
1/4
3/8
3/8
.078
.095
.120
.130
.175
.175
.230
.280
Select KNOB From Charts Below
Knurled Knob
Code Letter (K)
Screw
Size
Knob Specs
A
C
B
#4
5/16 11/64 9/32
#6
3/8 3/16 21/64
#8
1/2 7/32 3/8
#10
5/8
1/4 27/64
1/4
3/4 5/16 1/2
5/16
1 13/32 19/32
Material: Dupont Delrin
Colors Available
Black
Red
Gray
Code
BL
R
G
Rosette Knob
Code Letter (R)
Screw
Size
Knob Specs
A
C
B
1/4 1-1/2 3/8
1/2
5/16 1-1/2 13/32 37/64
3/8 1-1/2 15/32 45/64
Material: Dupont Delrin
Tee Knob
Code Letter (T)
Screw
Size
#10
1/4
5/16
3/8
Knob Specs
A
C
B
1
1/4
7/16
1-1/4 5/16 33/64
1-1/2 13/32 5/8
1-3/4 15/32 23/32
Material: Dupont Delrin
Colors Available
Black
Gray
Beige
Code
BL
G
B
Colors Available
Black
Red
Gray
Beige
Code
BL
R
G
B
171
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
SOCKET HEAD CAP SCREW
Self-Sealing/Self-Locking Devices available, see page 109.
ORDER EXAMPLE:
63004 - SS - 12
Basic
Part
Number
Stainless
Steel
18-8
THREAD: Fully formed threads - Unified National Coarse and Fine.
Available in 4-40 and up only.
Finish:
See page
277
To order Low Profile Head, add LP to part number
(available in 4-40 thread and up only).
EXAMPLE: 63004-SS-LP -7
Diameter
Threads
per Inch
SCREWS
Key Size
#0
.80 UNF
.050
Key
#1
72 UNF
1/16
Key
#2
56 UNC
5/64
Key
#3
48 UNC
5/64 Key
Length
Under
Head*
Basic
Part
Number
1/8
3/16
5/16
1/4
1/2
3/8
5/8
3/4
1
1/8
3/16
1/4
3/8
1/2
5/8
3/4
1
1/8
3/16
7/32
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1/8
3/16
1/4
5/16
3/8
5/8
1/2
3/4
63000
63002
63004
63006
63008
63010
63012
63014
63016
63018
63020
63022
63024
63026
63028
63030
63032
63034
63036
63038
63040
63042
63044
63046
63048
63050
63052
63054
63056
63058
63060
63062
63064
63066
63068
63070
63072
Diameter
Threads
per Inch
Key Size
#3 48 UNC
5/64 Key
#4
40 UNC
3/32
Key
#5
.40 UNC
3/32
Key
#6
32 UNC
For Tolerances, head dimensions, and other specifications,
see pages 281-287.
Available Material (see page 275)
Stainless Steel 18-8
Diameter
Diameter
Diameter
Length
Under
Head*
Basic
Part
Number
Threads
per Inch
Length
Under
Head*
Basic
Part
Number
Threads
per Inch
Length
Under
Head*
Basic
Part
Number
7/8
1
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1-1/4
1-3/8
1-1/2
1-3/4
2
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
1/8
3/16
1/4
3/8
63074
63076
63078
63080
63082
63084
63086
63088
#6
63090
63092 32 UNC
63094
63098
63096
63100
63102
63104
63106
63108
63110
63112
63114
63116
63118
#6
63120
63122 40 UNF
63124
63126
63130
63128
63132
63134
63136
63138
#8
63140
63142 32 UNC
63144
63146
7/16
1/2
9/16
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
7/8
1
1-1/4
1-1/2
1/8
3/16
1/4
5/16
3/8
7/16
1/2
63148
63150
63152
63154
63156
63158
#8
63160
63162 32 UNC
63164
63166
63168
63170
63172
63174
63176
63178
63180
63182
63184
63186
#8
63188
63190 36 UNF
63192
63194
63198
63196
63200
63202
63204
63206
63208
#10
63210
63212 24 UNC
63214
63216
63218
63220
9/16
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
2-1/4
2-1/2
3
3-1/4
4
1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1
63222
63224
63226
63228
63230
63232
#10
63234
63236 24 UNC
63238
63240
63242
63244
63246
63248
63250
63251
63252
63254
63256
63258
63260
63262
63264
#10
63266
63268 32 UNF
63270
63272
63274
63276
63278
63280
63282
63284
63286
63288
63290
63292
Threads
per Inch
Length
Under
Head*
Basic
Part
Number
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/2
4
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
4
63294
63296
63298
63300
63302
63304
63306
63308
63310
63312
63314
63316
63318
63320
63322
63324
63326
63328
63330
63332
63334
63336
63338
63340
63342
63344
63346
63348
63350
63352
63354
63356
63358
63360
63362
63364
63366
63368
* Tolerances, see page 281
172
NOTE: Standard socket products have a class 3A hreads, however, once plated, threads will not enter 3A GO, NO GO Cages.
Minimum thread length is 2-1/2 times diameter .
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
ORDER EXAMPLE:
63438 - SS - 12
Self-Sealing/Self-Locking Devices available, see page 109.
For Tolerances, head dimensions, and other
specifications, see pages 281-287.
THREAD: Fully formed threads - Unified Na tional
Coarse and Fine.
Minimum thread length 2.5 x diameter. Available in
4-40 and up only.
Diameter
Threads
per Inch
1/4
20 UNC
1/4
28 UNF
Length
Under
Head*
Basic
Part
Number
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/4
2-3/8
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
4-1/2
5
5-1/2
6
8
1/4
7/16
3/8
1/2
9/16
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
2-1/4
2-1/2
63370
63372
63374
63376
63378
63380
63382
63384
63386
63388
63390
63392
63394
63396
63398
63400
63402
63404
63406
63408
63410
63412
63414
63416
63418
63420
63422
63424
63426
63428
63430
63432
63434
63436
63438
63440
63442
63444
63446
63448
63450
63452
63454
63456
63458
63460
63462
63464
63466
Diameter
Threads
per Inch
Length
Under
Head*
2-3/4
3
3-1/4
1/4
3-1/2
4
28 UNF 4-1/2
5
5-1/2
6
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-7/16
1-1/2
1-5/8
1-3/4
5/16
2
18 UNC 2-1/8
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
4-1/2
5
5-1/2
6
8
3/8
1/2
5/8
3/4
5/16
7/8
1
24 UNF
1-1/4
1-1/2
1-5/8
1-3/4
Basic
Part
Number
Diameter
Basic
Part
Number
Available Material
(see page 275)
Stainless Steel 18-8,
302 Series
Stainless
Steel
18-8
Finish:
See page
277
To order Low Profile Head, add LP to part number.
EXAMPLE: 63438-SS-LP -7
Diameter
Diameter
Threads
per Inch
Length
Under
Head*
Basic
Part
Number
Threads
per Inch
Length
Under
Head*
Basic
Part
Number
63468
63470
63472
63474
63476
5/16
63478
63480
63482 24 UNF
63484
63486
63488
63490
63492
63494
63496
63498
63500
63502
63504
63506
63508
63510
63512
63514
63516
63518
63520
63522
3/8
63524
63526 16 UNC
63528
63530
63532
63534
63536
63538
63540
63542
63544
63546
63548
63550
63552
63554
63556
63558
3/8
63560
63562 24 UNF
63564
2
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
4-1/2
5
5-1/2
6
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
4-1/4
4-1/2
4-3/4
5
5-1/2
6
6-1/2
7
8
3/8
1/2
5/8
3/4
7/8
63566
63568
63570
63572
63574
63576
63578
63580
3/8
63582
63584 24 UNF
63586
63588
63590
63592
63594
63596
63598
63600
63602
63604
63606
63608
63610
63612
63614
63616
7/16
63618
63620
63622 14 UNC
63624
63626
63628
63630
63632
63634
63638
63640
63642
63644
63646
63648
63650
63652
7/16
63654
63656
20 UNF
63658
63660
63662
63664
1
1-1/8
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
4
4-1/2
5
5-1/2
6
1/2
5/8
3/4
7/8
1
1-1/4
1-3/8
1-1/2
1-3/4
1-7/8
2
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
4
4-1/2
5
5-1/2
6
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/4
63666
63668
7/16
63670
63672
63674 20 UNF
63676
63678
63680
63682
63684
63686
63688
63690
63692
63694
63696
63698
63700
63702
63704
63706
63708
63710
63712
63714
1/2
63716
63718 13 UNC
63720
63722
63724
63726
63728
63730
63732
63734
63736
63738
63740
63742
63744
63746
63748
63750
63752
63754
63756
63758
63760
63762
NOTE: Standard socket products have a class 3A threads, however, once plated, threads will not enter 3A GO, NO GO Cages.
Minimum thread length is 2-1/2 times diameter .
Threads
per Inch
Length
Under
Head*
Basic
Part
Number
2-1/2
2-3/4
3
3-1/4
3-1/2
4
6
3/8
1/2
5/8
3/4
7/8
1
11/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/4
2-3/8
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
4-1/4
4-1/2
4-3/4
5
5-1/4
5-1/2
6
7
7-1/2
8
8-1/2
9
9-1/2
10
11
12
63764
63766
63768
63770
63772
63774
63776
63778
63780
63782
63784
63786
63788
63790
63792
63794
63796
63798
63800
63802
63804
63806
63808
63810
63812
63814
63816
63818
63820
63822
63824
63826
63828
63830
63832
63834
63836
63838
63840
63842
63844
63846
63848
63850
63852
63854
SCREWS
SOCKET HEAD CAP SCREW
*Tolerances,
see page 281
173
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
SOCKET SET SCREW
Cup Point
Thread
Fully Formed Threads
Unified National Coarse and Fine 3A
ORDER EXAMPLE:
99100 - SS - 12
Available Material (see page 275)
SS
Diameter
Threads
per Inch
Overall
Length
Key Size
SCREWS
#0
80 UNF
.028 Key
#1
72 UNF
.035 Key
#2
56 UNC
.035 Key
#3
48 UNC
.050 Key
#4
40 UNC
.050 Key
#4
48 UNF
.050 Key
#5
40 UNC
1/16 Key
174
1/16
3/32
1/8
3/16
1/4
1/16
3/32
1/8
3/16
1/4
1/16
3/32
1/8
3/16
1/4
3/32
1/8
3/16
1/4
1/8
3/16
1/4
5/16
3/8
1/2
5/8
1/8
3/16
1/4
5/16
3/8
1/2
5/8
1/8
3/16
Basic
Part
Number
Stainless Steel 18-8, 302 Series
Basic
Part
Number
99100
99102
99104
99106
99107
99108
99110
99112
99114
99116
99118
99120
99122
99124
99126
99128
99130
99132
99136
99138
99140
99142
99144
99146
99148
99150
99152
99154
99156
99158
99160
99162
99164
99166
99168
Diameter
Threads
per Inch
Overall
Length
Key Size
#5
40 UNC
1/16 Key
#5
44 UNF
1/16 Key
#6
32 UNC
1/16 Key
#6
40 UNF
1/16 Key
#8
32 UNC
5/64 Key
1/4
5/16
3/8
1/2
5/8
3/4
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1/8
3/16
1/4
5/16
3/8
1/8
3/16
1/4
5/16
3/8
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
Basic
Part
Number
Diameter
Threads
per Inch
Overall
Length
Key Size
99170
99172
99174
99176
#8
99178
36 UNF
99180
5/64 Key
99182
99184
99186
99188
99190
99192
99194
99196
99198
#10
99200
99204 24 UNC
3/32 Key
99206
99208
99210
99212
99214
99216
99218
99220
#10
99222
99224 32 UNF
99226 3/32 Key
99228
99230
99232
99234
99236
1/4
99238
20 UNC
99240 1/8 Key
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/4
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/4
3/16
1/4
Basic
Part
Number
Stainless
Steel
18-8
Finish:
See page
277
Diameter
Threads
per Inch
Key Size
99242
99244
99246
99248
99250
1/4
99252
20 UNC
99254 1/8 Key
99256
99258
99260
99262
99264
99266
99268
99270
99272
99274
99276
1/4
99278 28 UNF
99280 1/8 Key
99282
99284
99286
99288
99290
99292
99294
99296
99298
99300
5/16
99302
18 UNC
99304 5/32 Key
99306
99308
99310
Overall
Length
Basic
Part
Number
5/16 99312
3/8
99314
7/16 99316
1/2
99318
5/8
99320
3/4
99322
7/8
99324
1
99326
1-1/4 99328
1-1/2 99330
1-3/4 99332
2 99334
3/16 99336
1/4
99338
5/16 99340
3/8
99342
7/16 99344
1/2
99346
5/8
99348
3/4
99350
7/8
99352
1
99354
1-1/4 99356
1-1/2 99358
1-3/4 99360
2
99362
1/4
99364
5/16 99366
3/8
99367
7/16 99368
1/2
99370
5/8
99372
3/4
99374
7/8
99376
1
99378
Diameter
Threads
per Inch
Overall
Length
Key Size
1-1/4
5/16
1-1/2
18 UNC 1-3/4
5/32 Key
2
1/4
5/16
3/8
7/16
1/2
5/16
5/8
24 UNF
3/4
5/32 Key 7/8
1
1-1/4
1-1/2
1-3/4
2
1/4
5/16
3/8
7/16
1/2
5/8
3/8
3/4
16 UNC
7/8
3/16 Key
1
1-1/4
1-1/2
1-3/4
2
2-1/2
1/4
3/8
5/16
24 UNF
3/8
3/16 Key
7/16
Basic
Part
Number
99380
99382
99384
99386
99388
99390
99391
99392
99394
99396
99398
99400
99402
99404
99406
99408
99410
99412
99414
99416
99418
99420
99422
99424
99426
99428
99430
99432
99434
99436
99438
99440
99442
99444
99446
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
SOCKET SET SCREW
Cup Point
ORDER EXAMPLE:
99448 - SS - 12
Available Material (see page 275)
SS
Diameter
Threads
per Inch
Overall
Length
Key Size
1/2
5/8
3/4
3/8
7/8
24 UNF
1
3/16 Key 1-1/4
1-1/2
1-3/4
2
2-1/2
3/8
7/16
1/2
5/8
7/16
3/4
14 UNC
7/8
7/32 Key
1
1-1/4
1-1/2
2
Basic
Part
Number
Stainless Steel 18-8, 302 Series
Basic
Part
Number
Diameter
Threads
per Inch
Overall
Length
Key Size
99448
99450
99452
7/16
99454
99456 20 UNF
99458 7/32 Key
99460
99462
99464
99466
99468
99470
99472
99474
1/2
99476
99478 13 UNC
99480 1/4 Key
99482
99484
99486
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
Basic
Part
Number
Diameter
Threads
per Inch
Overall
Length
Key Size
99488
1/2
99490 13 UNC
99492
99494
99496
99498
99500
1/2
99502
99504 20 UNF
99506 1/4 Key
99508
99510
99512
99514
99516
99518
99520
5/8
99522
11 UNC
99524
5/16 Key
99526
2
2-1/2
3
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
1/2
5/8
3/4
7/8
Basic
Part
Number
Stainless
Steel
18-8
Finish:
See page
277
Diameter
Threads
per Inch
Overall
Length
Key Size
99528
99530
5/8
99532
99534 11 UNC
99536 5/16 Key
99538
99540
99542
99544
99546
99548
5/8
99550
99552 18 UNF
99554 5/16 Key
99556
99558
99560
99562
3/4
99564
10 UNC
99566 3/8 KEY
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
5/8
3/4
Basic
Part
Number
Diameter
Threads
per Inch
Overall
Length
Basic
Part
Number
1
1-1/4
1-1/2
1-3/4
2
2-1/2
3
7/8
1
1-1/2
2
2-1/2
3
1
1-1/2
2
2-1/2
3
99608
99610
99612
99614
99616
99618
99620
99622
99624
99626
99628
99630
99632
99634
99636
99638
99640
99642
Key Size
99568
99570
3/4
99572
99574 10 UNC
99576 3/8 Key
99578
99580
99582
99584
7/8
99586 9 UNC
99588 1/2 Key
99590
99592
99594
1
99596
8
UNC
99598
99600 9/16 Key
99602
99604
99606
SCREWS
Thread
Fully Formed Threads
Unified National Coarse and Fine 3A
175
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
NYLON TIP HEX SOCKET SET SCREW
Thread or Screw
Locking
ORDER EXAMPLE:
111324 - SS - 11
SCREWS
Basic
Part
Number
Thread
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
1/4-28
176
Stainless
Steel
18-8
Available Material (see page 275)
Finish:
See page
277
SS
Stainless Steel 18-8, 302 Series
D
T
L
Part Number
Material
1/32
1/32
1/16
1/16
1/16
1/16
1/16
1/16
7/64
7/64
7/64
7/64
7/64
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/32
1/32
1/32
1/32
1/32
1/32
1/32
1/32
3/64
3/64
3/64
3/64
3/64
3/64
3/64
3/64
3/64
3/64
3/64
3/64
3/64
3/64
3/64
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/16
1/8
1/4
1/8
1/4
3/8
1/8
1/4
3/8
1/8
3/16
1/4
3/8
1/2
3/16
1/4
3/8
1/2
5/8
3/16
1/4
3/8
1/2
5/8
1/4
5/16
3/8
1/2
5/8
3/4
1/4
5/16
111324 SS
111326 SS
111328 SS
111330 SS
111332 SS
111334 SS
111336 SS
111338 SS
111340 SS
111342 SS
111344 SS
111346 SS
111348 SS
111350 SS
111352 SS
111354 SS
111356 SS
111358 SS
111360 SS
111362 SS
111364 SS
111366 SS
111368 SS
111370 SS
111372 SS
111374 SS
111376 SS
111378 SS
111380 SS
111382 SS
111384 SS
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
SLOTTED ROUND HEAD MACHINE SCREW
Self-sealing devices, see page 119. Self-locking devices, see page 109.
Captive
Nylon
Screws
N
B
S
SS
Thread Size
D
H
W
2
3
4
6
8
10
1/4
.135-.165
.169-.187
.193-.225
.240-.275
.275-.309
.310-.359
.443-.490
.045-.075
.067-.078
.055-.086
.085-.115
.095-.125
.115-.145
.145-.175
.013-.043
.027-.035
.020-.050
.030-.060
.035-.065
.040-.070
.055-.085
Basic Part
Number
112424
112426
112428
112430
112432
112434
112436
112438
112440
112442
112444
112446
112448
112450
112452
112454
112456
112458
112460
112462
112464
112466
112468
112470
112472
112474
112476
112478
112480
112482
112484
112486
112488
112490
112492
112494
Thread
L
1-64
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
3-48
3-48
3-48
3-48
3-48
3-48
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
3/16
1/8
5/32
3/16
1/4
9/32
5/16
3/8
7/16
1/2
9/16
5/8
3/4
1
1/8
3/16
1/4
3/8
1/2
9/16
1/8
9/64
3/16
1/4
9/32
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1
1-1/8
Basic Part
Number
112496
112498
112500
112502
112504
112506
112508
112510
112512
112514
112516
112518
112520
112522
112524
112526
112528
112530
112532
112534
112536
112538
112540
112542
112544
112546
112548
112550
112552
112554
112556
112558
112560
112562
112564
112566
C
.030-.060
.040-.053
.035-.065
.045-.075
.050-.080
.060-.090
.075-.109
Nylon, Zytel 101 UL 94V2
Brass, Composition 360
Steel, low carbon 1018 ASTM 108
Stainless Steel, 18-8, 302-304 series
ORDER EXAMPLE:
112424 - SS - 1
Basic
Material:
Finish:
Part
See chart
See page
Number
277
Choose color from chart, otherwise Natural is provided.
Black
For Nylon parts: Example: 112424-N-2
Thread
L
4-40
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-40
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
10-24
10-24
1-1/4
3/32
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
1-1/8
1-1/4
1-1/2
1-3/4
3/8
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
1/8
3/16
Basic Part
Number
112568
112570
112572
112574
112576
112578
112580
112582
112584
112586
112588
112590
112592
112594
112696
112598
112600
112602
112604
112606
112608
112610
112612
112614
112616
112618
112620
112622
112624
112626
112628
112630
112632
112634
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Thread
L
10-24
10-24
10-24
10-24
10-24
10-24
10-24
10-24
10-24
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
SCREWS
See page
186 for
details.
Available Material (see page 275)
177
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
HEXAGON SOCKET HEAD CAP SCREW
Captive
Nylon
Screws
Self-sealing devices, see page 119. Self-locking devices, see page 109.
See page
186 for
details.
Available Material (see page 275)
SS
N
SCREWS
178
Thread Size
D
H
W
C
4
.165-.195
.095-.125
3/32
.051
6
.207-.237
.121-.151
7/64
.064
8
.250-.280
.147-.177
9/64
.077
10
.295-.325
.173-.203
5/32
.090
1/4
.355-.385
.163-.233
3/16
.120
Basic Part
Number
112832
112834
112836
112838
112840
112842
112844
112846
112848
112850
112852
112854
112856
112858
112860
112862
112864
112866
112868
112870
112872
112874
112876
112878
112880
112882
112884
112886
112888
112890
112892
112894
112896
112898
112900
112902
112904
112906
Thread
L
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-40
8-32
8-32
8-32
8-32
8-32
8-32
8-32
1/8
3/16
1/4
9/32
5/16
3/8
7/16
1/2
5/8
11/16
3/4
7/8
1
1-1/8
1-1/4
3/32
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
1-1/8
1-1/4
1-1/2
1-3/4
3/8
1/8
3/16
1/4
5/16
3/8
7/16
1/2
Basic Part
Number
112908
112910
112912
112914
112916
112918
112920
112922
112924
112926
112928
112930
112932
112934
112936
112938
112940
112942
112944
112946
112948
112950
112952
112954
112956
112958
112960
112962
112964
112966
112968
112970
112972
112974
112976
112978
112980
112982
Stainless SteeL 18-8, 302-304 series
Nylon Zytel 101 ul 94v2
ORDER EXAMPLE:
112832 - SS - 12
Basic
Material:
Finish:
Part
See chart
See page
Number
277
Choose color from chart, otherwise Natural is provided.
Black
For Nylon parts: Example: 112832-N-2
Thread
L
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
10-24
10-24
10-24
10-24
10-24
10-24
10-24
10-24
10-24
10-24
10-24
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
5/8
3/4
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
1/4
5/16
3/8
1/2
5/8
Basic Part
Number
112984
112986
112988
112990
112992
112994
112996
112998
113000
113002
113004
113006
113008
113010
113012
113014
113016
113018
113020
113022
113024
113026
113028
113030
113032
113034
113036
113038
113040
113042
113044
113046
113048
113050
113052
113054
113056
113058
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Thread
L
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
1/2
3/4
1
1-1/2
2
2-1/2
3
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
HEX HEAD MACHINE SCREW
Captive
Nylon
Screws
Self-sealing devices, see page 119. Self-locking devices, see page 109.
Available Material (see page 275)
N Nylon Zytel 101 UL 94V2
S Steel, low carbon 1018 ASTM 108
SS Stainless Steel 18-8, 302-304 series
Thread
Size
D
2
4
6
8
10
1/4
.110-.140
.165-.195
.235-.265
.235-.265
.295-.325
.395-.438
E
.125-.155
.195-.220
.268-.298
.268-.298
.325-.355
.440-.505
H
.025-.055
.040-.070
.070-.100
.095-.125
.105-.120
.190-.150
ORDER EXAMPLE:
111826 - SS - 1
Basic
Material:
Finish:
Part
See chart
See page
Number
277
Choose color from chart, otherwise Natural is provided.
Black
For Nylon parts: Example: 111826-N-2
Basic Part
Number
Thread
L
Basic Part
Number
Thread
L
111826
111828
111830
111832
111834
111836
111838
111840
111842
111844
111846
111848
111850
111852
111854
111856
111858
111860
111862
111864
111866
111868
111870
111872
111874
111876
111878
111880
111882
111884
111886
111888
111890
111892
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
6-32
6-32
6-32
6-32
1/8
3/16
1/4
9/32
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1/8
9/64
3/16
1/4
9/32
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1
1-1/8
1-1/4
3/32
1/8
3/16
1/4
111894
111896
111898
111900
111902
111904
111906
111908
111910
111912
111914
111916
111918
111920
111922
111924
111926
111928
111930
111932
111934
111936
111938
111940
111942
111944
111946
111948
111950
111952
111954
111956
111958
111960
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-40
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
10-24
10-24
10-24
10-24
5/16
3/8
7/16
1/2
5/8
11/16
3/4
1
1-1/8
1-1/4
1-1/2
1-3/4
3/8
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
1/8
3/16
1/4
5/16
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Basic Part
Number
Thread
L
111962
111964
111966
111968
111970
111972
111974
111976
111978
111980
111982
111984
111986
111988
111990
111992
111994
111996
111998
112000
112002
112004
112006
112008
112010
112012
112014
112016
112018
112020
112022
112024
10-24
10-24
10-24
10-24
10-24
10-24
10-24
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
SCREWS
See page
186 for
details.
179
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
SLOTTED BINDING HEAD MACHINE SCREW
Self-sealing devices, see page 119. Self-locking devices, see page 109.
Captive
Nylon
Screws
Available Material (see page 275)
N
B
S
SS
Thread
Size
2
4
6
8
10
1/4
SCREWS
180
D
.160-.190
.220-.250
.275-.305
.326-.365
.365-.399
.485-.525
H
C
W
.035-.065
.050-.080
.065-.095
.085-.115
.105-.135
.140-.170
.013-.043
.020-.050
.030-.060
.035-.065
.040-.070
.055-.085
.010-.040
.020-.050
.030-.060
.035-.065
.040-.070
.055-.105
Nylon Zytel 101 UL 94V2
Brass, Composition 360
Steel, low carbon 1018 ASTM 108
Stainless Steel 18-8, 302-304 series
ORDER EXAMPLE:
111430 - SS - 1
Basic
Material:
Finish:
Part
See chart
See page
Number
277
Choose color from chart, otherwise Natural is provided.
Black
For Nylon parts: Example: 111430-N-2
Basic Part
Number
Thread
L
Basic Part
Number
Thread
L
111430
111432
111434
111436
111438
111440
111442
111444
111446
111448
111450
111452
111454
111456
111458
111460
111462
111464
111466
111468
111470
111472
111474
111476
111478
111480
111482
111484
111486
111488
111490
111492
111494
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
6-32
6-32
6-32
6-32
1/8
3/16
1/4
9/32
5/16
3/8
7/16
1/2
9/16
5/8
3/4
1
1/8
9/64
3/16
1/4
9/32
5/16
3/8
7-16
1/2
9/16
5/8
11/16
3/4
7/8
1
1-1/8
1-1/4
3/32
1/8
3/16
1/4
111496
111498
111500
111502
111504
111506
111508
111510
111512
111514
111516
111518
111520
111522
111524
111526
111528
111530
111532
111534
111536
111538
111540
111542
111544
111546
111548
111550
111552
111554
111556
111558
111560
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-40
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
10-24
10-24
10-24
5/16
3/8
7/16
1/2
5/8
11/16
3/4
1
1-1/8
1-1/4
1-1/2
1-3/4
3/8
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
1/8
3/16
1/4
Basic Part
Number
Thread
111562
10-24
111564
10-24
111566
10-24
111568
10-24
111570
10-24
111572
10-24
111574
10-24
111576
10-24
111578
10-32
111580
10-32
111582
10-32
111584
10-32
111586
10-32
111588
10-32
111590
10-32
111592
10-32
111594
10-32
111596
10-32
111598
10-32
111600
10-32
111602
10-32
111604
1/4-20
111606
1/4-20
111608
1/4-20
111610
1/4-20
111612
1/4-20
111614
1/4-20
111616
1/4-20
111618
1/4-20
111620
1/4-20
111622
1/4-20
111624
1/4-20
111626 1/4-20
See page
186 for
details.
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
L
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
SLOTTED FILLISTER HEAD MACHINE SCREW
Self-sealing devices, see page 119. Self-locking devices, see page 109.
Captive
Nylon
Screws
Available Material (see page 275)
Thread
Size
2
4
6
8
10
1/4
D
.124-.155
.165-.195
.200-.230
.240-.270
.285-.315
.385-.415
H
C
W
.053-.090
.085-.115
.110-.140
.133-.165
.156-.190
.207-.245
.015-.045
.020-.050
.030-.060
.035-.065
.040-.070
.055-.085
.015-.045
.025-.055
.035-.065
.045-.075
.055-.085
.075-.105
Nylon Zytel 101 UL 94V2
Brass, Composition 360
Steel, low carbon 1018 ASTM 108
Stainless Steel 18-8, 302-304 series
ORDER EXAMPLE:
111628 - SS - 1
Basic
Material:
Finish:
Part
See chart
See page
Number
277
Choose color from chart, otherwise Natural is provided.
Black
For Nylon parts: Example: 111628-N-2
See page
186 for
details.
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Basic Part
Number
Thread
L
Basic Part
Number
Thread
L
Basic Part
Number
Thread
L
111628
111630
111632
111634
111636
111638
111640
111642
111644
111646
111648
111650
111652
111654
111656
111658
111660
111662
111664
111666
111668
111670
111672
111674
111676
111678
111680
111682
111684
111686
111688
111690
111692
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
6-32
6-32
6-32
6-32
1/8
3/16
1/4
9/32
5/16
3/8
7/16
1/2
9/16
5/8
3/4
1
1/8
9/64
3/16
1/4
9/32
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1
1-1/8
1-1/4
3/32
1/8
3/16
1/4
111694
111696
111698
111700
111702
111704
111706
111708
111710
111712
111714
111716
111718
111720
111722
111724
111726
111728
111730
111732
111734
111736
111738
111740
111742
111744
111746
111748
111750
111752
111754
111756
111758
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-40
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
10-24
10-24
10-24
5/16
3/8
7/16
1/2
5/8
11/16
3/4
1
1-1/8
1-1/4
1-1/2
1-3/4
3/8
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
1/8
3/16
1/4
111760
111762
111764
111766
111768
111770
111772
111774
111776
111778
111780
111782
111784
111786
111788
111790
111792
111794
111796
111798
111800
111802
111804
111806
111808
111810
111812
111814
111816
111818
111820
111822
111824
10-24
10-24
10-24
10-24
10-24
10-24
10-24
10-24
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
SCREWS
N
B
S
SS
181
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
SLOTTED HEX HEAD MACHINE SCREW
Self-sealing devices, see page 119. Self-locking devices, see page 109.
Captive
Nylon
Screws
See page
186 for
details.
Available Material (see page 275)
N
S
SS
SCREWS
182
Thread
Size
D
E
H
W
C
2
4
6
8
10
1/4
.110-.140
.165-.195
.235-.265
.235-.265
.295-.325
.395-.438
.125-.155
.195-.220
.268-.298
.268-.298
.325-.355
.440-.505
.025-.055
.040-.070
.070-.100
.095-.125
.095-.125
.190-.150
.013-.043
.020-.050
.030-.060
.035-.065
.040-.070
.055-.085
.010-.040
.020-.050
.030-.060
.040-.070
.055-.085
.075-.105
Nylon Zytel 101 UL 94V2
Steel, low carbon 1018 ASTM 108
Stainless Steel 18-8, 302-304 series
ORDER EXAMPLE:
112026 - SS - 1
Basic
Material:
Finish:
Part
See chart
See page
Number
277
Choose color from chart, otherwise Natural is provided.
Black
For Nylon parts: Example: 112026-N-2
Basic Part
Number
Thread
L
Basic Part
Number
Thread
L
112026
112028
112030
112032
112034
112036
112038
112040
112042
112044
112046
112048
112050
112052
112054
112056
112058
112060
112062
112064
112066
112068
112070
112072
112074
112076
112078
112080
112082
112084
112086
112088
112090
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
6-32
6-32
6-32
6-32
1/8
3/16
1/4
9/32
5/16
3/8
7/16
1/2
9/16
5/8
3/4
1
1/8
9/64
3/16
1/4
9/32
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1
1-1/8
1-1/4
3/32
1/8
3/16
1/4
112092
112094
112096
112098
112100
112102
112104
112106
112108
112110
112112
112114
112116
112118
112120
112122
112124
112126
112128
112130
112132
112134
112136
112138
112140
112142
112144
112146
112148
112150
112152
112154
112156
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-40
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
10-24
10-24
10-24
10-24
5/16
3/8
7/16
1/2
5/8
3/4
1
1-1/8
1-1/4
1-1/2
1-3/4
3/8
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
1/8
3/16
1/4
5/16
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Basic Part
Number
Thread
L
112158
112160
112162
112164
112166
112168
112170
112172
112174
112176
112178
112180
112182
112184
112186
112188
112190
112192
112194
112196
112198
112200
112202
112204
112206
112208
112210
112212
112214
112216
112218
112220
10-24
10-24
10-24
10-24
10-24
10-24
10-24
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
SLOTTED PAN HEAD MACHINE SCREW
Self-sealing devices, see page 119. Self-locking devices, see page 109.
Captive
Nylon
Screws
Available Material (see page 275)
Thread
Size
2
3
4
6
8
10
1/4
D
H
W
C
.145-.175
.180-.193
.195-.225
.250-.280
.305-.335
.350-.380
.460-.492
.035-.065
.051-.060
.050-.080
.060-.090
.065-.096
.095-.125
.130-.175
.013-.043
.027-.035
.020-.050
.030-.060
.035-.065
.040-.070
.055-.085
.010-.040
.026-.036
.020-.050
.030-.060
.035-.065
.045-.075
.070-.100
Nylon Zytel 101 UL 94V2
Brass, Composition 360
Steel, low carbon 1018 ASTM 108
Stainless Steel 18-8, 302-304 series
ORDER EXAMPLE:
112222 - SS - 1
Basic
Material:
Finish:
Part
See chart
See page
Number
277
Choose color from chart, otherwise Natural is provided.
Black
For Nylon parts: Example: 112222-N-2
Basic Part
Number
Thread
L
Basic Part
Number
Thread
L
112222
112224
112226
112228
112230
112232
112234
112236
112238
112240
112242
112244
112246
112248
112250
112252
112254
112256
112258
112260
112262
112264
112266
112268
112270
112272
112274
112276
112278
112280
112282
112284
112286
112288
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
3-48
3-48
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
6-32
6-32
6-32
1/8
3/16
1/4
9/32
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1/4
1/8
9/64
3/16
1/4
9/32
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1
1-1/8
1-1/4
3/32
1/8
3/16
112290
112292
112294
112296
112298
112300
112302
112304
112306
112308
112310
112312
112314
112316
112318
112320
112322
112324
112326
112328
112330
112332
112334
112336
112338
112340
112342
112344
112346
112348
112350
112352
112354
112356
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-40
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
10-24
10-24
10-24
1/4
5/16
3/8
7/16
1/2
5/8
11/16
3/4
1
1-1/8
1-1/4
1-1/2
1-3/4
3/8
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
1/8
3/16
1/4
See page
186 for
details.
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Basic Part
Number
Thread
L
112358
112360
112362
112364
112366
112368
112370
112372
112374
112376
112378
112380
112382
112384
112386
112388
112390
112392
112394
112396
112398
112400
112402
112404
112406
112408
112410
112412
112414
112416
112418
112420
112422
10-24
10-24
10-24
10-24
10-24
10-24
10-24
10-24
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
SCREWS
N
B
S
SS
183
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
SLOTTED FLAT COUNTERSUNK HEAD MACHINE SCREW
Self-sealing devices, see page 119. Self-locking devices, see page 109.
Captive
Nylon
Screws
See page
186 for
details.
Available Material (see page 275)
N
S
SS
SCREWS
Thread
Size
D
H
W
C
2
4
6
8
10
1/4
.140-.172
.195-.225
.244-.295
.290-.332
.340-.385
.450-.507
.040-.060
.055-.085
.070-.100
.085-.115
.105-.135
.140-.170
.013-.043
.020-.050
.030-.060
.035-.065
.040-.070
.055-.085
.005-.035
.020-.040
.015-.045
.020-.050
.030-.060
.055-.085
Basic
Part Number
113260
113262
113264
113266
113268
113270
113272
113274
113276
113278
113280
113282
113284
113286
113288
113290
113292
113294
113296
113298
113300
113302
113304
113306
113308
113310
Thread
L
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
3/16
1/4
5/16
3/8
7/16
1/2
9/16
3/4
1/8
5/32
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/8
!
184
Basic
Part Number
113312
113314
113316
113318
113320
113322
113324
113326
113328
113330
113332
113334
113336
113338
113340
113342
113344
113346
113348
113350
113352
113354
113356
113358
113360
113362
Nylon Zytel 101 UL 94V2
Steel, low carbon 1018 ASTM 108
Stainless Steel 18-8, 302-304 series
ORDER EXAMPLE:
113260 - SS - 1
Basic
Material:
Finish:
Part
See chart
See page
Number
277
Choose color from chart, otherwise Natural is provided.
Black
For Nylon parts: Example: 113260-N-2
Thread
L
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
10-24
10-24
10-24
10-32
10-32
10-32
10-32
10-32
10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/8
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
1
1/2
3/4
1
1/4
5/16
3/8
1/2
3/4
1
1/4
1/2
5/8
3/4
1
1-1/2
2
TECH TIP
A286 stainless steel is r ecommended for high
strength stainless steel requirements.
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
SLOTTED OVAL COUNTERSUNK HEAD MACHINE SCREW
Self-sealing devices, see page 119. Self-locking devices, see page 109.
Captive
Nylon
Screws
Available Material (see page 275)
N
S
SS
Thread
Size
D
O
W
C
2
4
6
8
10
1/4
.140-.172
.195-.225
.244-.295
.290-.332
.340-.385
.450-.507
.055-.085
.075-.105
.095-.128
.125-.155
.145-.176
.197-.235
.013-.043
.020-.050
.030-.060
.035-.065
.040-.070
.055-.085
.005-.045
.010-.059
.015-.074
.020-.088
.030-.103
.055-.136
Basic
Part Number
113364
113366
113368
113370
113372
113374
113376
113378
113380
113382
113384
113386
113388
113390
113392
113394
113396
113398
113400
113402
113404
113406
113408
113410
113412
113414
Thread
L
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
3/16
1/4
5/16
3/8
7/16
1/2
9/16
3/4
1/8
5/32
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/8
Basic
Part Number
113416
113418
113420
113422
113424
113426
113428
113430
113432
113434
113436
113438
113440
113442
113444
113446
113448
113450
113452
113454
113456
113458
113460
113462
113464
113466
Nylon Zytel 101 UL 94V2
Steel, low carbon 1018 ASTM 108
Stainless Steel 18-8, 302-304 series
ORDER EXAMPLE:
113364 - SS - 1
Basic
Material:
Finish:
Part
See chart
See page
Number
277
Choose color from chart, otherwise Natural is provided.
Black
For Nylon parts: Example: 113364-N-2
Thread
L
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
10-24
10-24
10-24
10-32
10-32
10-32
10-32
10-32
10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/8
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
1
1/2
3/4
1
1/4
5/16
3/8
1/2
3/4
1
1/4
1/2
5/8
3/4
1
1-1/2
2
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
SCREWS
See page
186 for
details.
185
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
HEX CAP SCREW
Self-sealing devices, see page 119. Self-locking devices, see page 109.
Captive
Nylon
Screws
See page
186 for
details.
Available Material (see page 275)
N
S
SS
Thread
Size
SCREWS
1/4
5/16
3/8
1/2
5/8
Basic
Part Thread
Number
113468
113470
113472
113474
113476
113478
113480
113482
113484
113486
113488
113490
113492
113494
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
D
E
H
.395-.438
.470-.500
.544-.580
.725-.755
.906-.950
.440-.505
.546-.577
.610-.650
.826-.866
1.033-1.115
.150-.190
.195-.235
.226.268
.302-.364
.375-.444
L
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
Basic
Part Thread
Number
113496
113498
113500
113502
113504
113506
113508
113510
113512
113514
113516
113518
113520
113522
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
L
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
ORDER EXAMPLE:
113468 - SS - 1
Basic
Material:
Finish:
Part
See chart
See page
Number
277
Choose color from chart, otherwise Natural is provided.
Black
For Nylon parts: Example: 113468-N-2
Basic
Part Thread
Number
113524
113526
113528
113530
113532
113534
113536
113538
113540
113542
113544
113546
113548
113550
Nylon Zytel 101 UL 94V2
Steel, low carbon 1018 ASTM 108
Stainless Steel 18-8, 302-304 series
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
L
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
Basic
Part Thread
Number
113552
113554
113556
113558
113560
113562
113564
113566
113568
113570
113572
113574
113576
113578
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
L
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Basic
Part Thread
Number
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
113580
113582
113584
113586
113588
113590
113592
113594
113596
113598
113600
113602
113604
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
L
1/2
3/4
1
1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
CAPTIVE PANEL SCREW
Available in all head styles.
ORDER EXAMPLE:
113468 - N - 2 - CAP
Basic
Part
Number
186
Nylon
Color:
See chart
Captive
Thread
Size
2
3
4
6
8
10
1/4
5/16
3/8
1/2
5/8
G
K
+.005
+1/64
.061
.070
.078
.095
.120
.130
.175
.230
.280
.390
.490
1/8
5/32
5/32
3/16
3/16
1/4
3/8
1/2
5/8
5/8
3/4
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
SLOTTED HEX CAP SCREW
Captive
Nylon
Screws
Self-sealing devices, see page 119. Self-locking devices, see page 109.
Available Material (see page 275)
N
S
SS
Thread
Size
1/4
5/16
3/8
1/2
5/8
D
.395-.438 .440-.505
.470-.500 .546-.577
.544-.580 .610-.650
.725-.755 .826-.866
.906-.950 1.033-1.115
Basic
Part Thread
Number
113606
113608
113610
113612
113614
113616
113618
113620
113622
113624
113626
113628
113630
113632
E
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
H
W
C
.150-.190
.195-.235
.226-.268
.302-.364
.375-.444
.055-.085
.065-.095
.075-.105
.085-.115
.095-.125
.075-.105
.095-.125
.125-.155
.145-.175
.155-.185
Basic
Part Thread
Number
L
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
113634
113636
113638
113640
113642
113644
113646
113648
113650
113652
113654
113656
113658
113660
L
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
Basic
Part Thread
Number
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
113662
113664
113666
113668
113670
113672
113674
113676
113678
113680
113682
113684
113686
113688
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
Nylon Zytel 101 UL 94V2
Steel, low carbon 1018 ASTM 108
Stainless Steel 18-8, 302-304 series
ORDER EXAMPLE:
113606 - SS - 1
Basic
Material:
Finish:
Part
See chart
See page
Number
277
Choose color from chart, otherwise Natural is provided.
Black
For Nylon parts: Example: 113606-N-2
L
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
5-12
6
Basic
Part Thread
Number
113690
113692
113694
113696
113698
113700
113702
113704
113706
113708
113710
113712
113714
113716
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
113718
113720
113722
113724
113726
113728
113730
113732
113734
113736
113738
113740
113742
Self-Sealing/Self-Locking Devices available, see page 109.
Available Material (see page 275)
N
Nylon, Zytel 101 UL 94V2
± .015
± .015
± .015
4-40
6-32
8-32
10-24
10-32
1/4-20
.300
.360
.425
.425
.425
.540
.280
.275
.305
.325
.325
.365
.120
.125
.140
.140
.140
.155
D
B
C
ORDER EXAMPLE:
113744 - N - 2
Basic
Part
Number
Nylon
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Basic
Part Thread
Number
L
KNURLED NYLON THUMB SCREW
Thread
Size
Color
Color:
See chart
Choose color from chart, otherwise Natural is provided.
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
L
1/2
3/4
1
1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
5-1/2
6
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Basic Part
Number
Thread
L
Basic Part
Number
Thread
L
Basic Part
Number
Thread
L
113744
113746
113748
113750
113752
113754
113756
113758
4-40
4-40
4-40
4-40
6-32
6-32
6-32
6-32
1/4
3/8
1/2
3/4
1/4
3/8
1/2
3/4
113760
113762
113764
113766
113768
113770
113772
113774
6-32
8-32
8-32
8-32
8-32
8-32
10-24
10-24
1
3/16
3/8
1/2
3/4
1
1/2
3/4
113776
113778
113780
113782
113784
113786
113788
113790
10-24
10-24
10-32
10-32
10-32
10-32
1/4-20
1/4-20
1
1-1/4
3/8
1/2
3/4
1
1/2
3/4
SCREWS
See page
186 for
details.
187
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
SLOTTED SET SCREW
Available Material (see page 275)
N
S
SS
Thread
Size
SCREWS
2
4
6
8
10
1/4
188
D
± .015
.055
.075
.100
.120
.150
.175
H
± .015
W
± .015
C
± .015
.035
.045
.055
.055
.060
.080
.018
.020
.025
.028
.035
.040
.020
.025
.030
.035
.050
.060
Nylon Zytel 101 UL 94V2
Steel, low carbon 1018 ASTM 108
Stainless Steel 18-8, 302-304 series
ORDER EXAMPLE:
112636 - SS - 12
Basic
Material:
Finish:
Part
See chart
See page
Number
277
Choose color from chart, otherwise Natural is provided.
Black
For Nylon parts: Example: 112636-N-2
Basic Part
Number
Thread
L
Basic Part
Number
Thread
L
112636
112638
112640
112642
112644
112646
112648
112650
112652
112654
112656
112658
112660
112662
112664
112666
112668
112670
112672
112674
112676
112678
112680
112682
112684
112686
112688
112690
112692
112694
112696
112698
112700
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
2-56
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
6-32
6-32
6-32
6-32
3/32
1/8
3/16
1/4
9/32
5/16
3/8
7/16
1/2
5/8
3/4
1
1/8
5/32
3/16
1/4
9/32
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1
1-1/8
1-1/4
3/32
1/8
3/16
1/4
112702
112704
112706
112708
112710
112712
112714
112716
112718
112720
112722
112724
112726
112728
112730
112732
112734
112736
112738
112740
112742
112744
112746
112748
112750
112752
112754
112756
112758
112760
112762
112764
112766
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-40
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
10-24
10-24
10-24
10-24
5/16
3/8
7/16
1/2
5/8
3/4
1
1-1/8
1-1/4
1-1/2
1-3/4
3/8
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
1/8
3/16
1/4
5/16
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Basic Part
Number
Thread
L
112768
112770
112772
112774
112776
112778
112780
112782
112784
112786
112788
112790
112792
112794
112796
112798
112800
112802
112804
112806
112808
112810
112812
112814
112816
112818
112820
112822
112824
112826
112828
112830
10-24
10-24
10-24
10-24
10-24
10-24
10-24
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
1-888-208-2008
SCREWS
Fax (973) 244-9177
www.accuratescrew.com
SOCKET SET SCREW
W
Thread
Size
W
± .015
C
± .015
4
6
8
10
1/4
5/16
3/8
1/2
5/8
.050
.062
.078
.094
.125
.156
.188
.250
.312
.070
.080
.090
.100
.125
.156
.188
.250
.312
Basic Part
Number
Thread
113060
113062
113064
113066
113068
113070
113072
113074
113076
113078
113080
113082
113084
113086
113088
113090
113092
113094
113096
113098
113100
113102
113104
113106
113108
113110
113112
113114
113116
113118
113120
113122
113124
113126
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
4-40
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-32
6-40
Nylon Zytel 101 UL 94V2
Steel, low carbon 1018 ASTM 108
Stainless Steel 18-8, 302-304 series
ORDER EXAMPLE:
113060 - SS - 12
Basic
Material:
Finish:
Part
See chart
See page
Number
277
Choose color from chart, otherwise Natural is provided.
Black
For Nylon parts: Example: 113060-N-2
L
Basic Part
Number
Thread
1/8
9/64
5/32
3/16
1/4
9/32
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
1
1-1/8
1-1/4
3/32
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
1-1/8
1-1/4
1-1/2
1-3/4
3/8
113128
113130
113132
113134
113136
113138
113140
113142
113144
113146
113148
113150
113152
113154
113156
113158
113160
113162
113164
113166
113168
113170
113172
113174
113176
113178
113180
113182
113184
113186
113188
113190
113192
113194
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
8-32
10-24
10-24
10-24
10-24
10-24
10-24
10-24
10-24
10-24
10-24
10-24
10-32
10-32
10-32
10-32
10-32
10-32
10-32
± .015
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
L
Basic Part
Number
Thread
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
1/8
3/16
1/4
5/16
3/8
1/2
5/8
113196
113198
113200
113202
113204
113206
113208
113210
113212
113214
113216
113218
113220
113222
113224
113226
113228
113230
113232
113234
113236
113238
113240
113242
113244
113246
113248
113250
113252
113254
113256
113258
10-32
10-32
10-32
10-32
10-32
10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
5/8-11
5/8-11
± .015
SCREWS
Available Material (see page 275)
N
S
SS
L
± .015
3/4
7/8
1
1-1/4
1-1/2
2
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
1/2
3/4
1
1/2
3/4
1
1/2
3/4
1
1-1/4
1/2
3/4
1
1-1/2
189
1-888-208-2008
RETAINERS
Fax (973) 244-9177
www.accuratescrew.com
METHOD OF INSTALLATION
Series 400000 Retainers Only
Drill hole to press in.
Recommended Diameters
Shank
Diameter
.198
.228
.280
.366
.414
.479
Recommended
Panel Hole Diameter
+.002
–.000
.188
.218
.270
.356
.404
.469
METHOD OF INSTALLATION
RETAINERS
Series 500000, 550000, 600000, 650000,
700000 and 750000 Retainers Only
See page 45 for installation information.
Countersink formula: A = X + .045 minimum or .078 maximum
Retainer
Shank Diameter
.188
.218
.250
.270
.356
.404
.433
!
190
X
Drill or Punch
.191
.221
.257
.272
.359
.407
.437
TECH TIP
For shank diameters .270 and below
start with a .045 min when calculating
the diameter (“A”) of the countersink.
1-888-208-2008
RETAINERS
Fax (973) 244-9177
www.accuratescrew.com
SERIES 400000 RETAINER
For Captive Screws, see pages 113-156.
Basic
Material:
Finish:
Part
See chart
See page
Number
277
If any one dimension or tolerance change is required, add to
end of part number. EXAMPLE: 400001-SS-12 (A=1/2)
For method of installation, see page 190.
Available Material (see page 275)
A
B
S
SS
Aluminum
Brass
Steel
Stainless Steel
Basic
Part
Number
Thread
Panel
Thickness
A
B
C
D
E
F
G
+.004
+.002
+.004
-.001
+.005
+.005
+.010
+.005
400001
400002
400003
400004
400005
400006
400007
400008
400009
400010
400011
400012
400013
400014
400015
400016
400017
400018
400019
400021
400022
400023
400024
400025
400026
400027
400028
400029
400031
400032
400033
400034
400035
400036
400037
400038
400039
400041
400042
400043
4-40
4-40
4-40
6-32
6-32
6-32
6-32
8-32
8-32
8-32
8-32
10-24
10-24
10-24
10-24
10-24
10-32
10-32
10-32
10-32
10-32
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
5/16-18
5/16-18
5/16/18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
3/8-16
.048 - .072
.074 - .109
.119 - .156
.048 - .072
.074 - .109
.119 - .156
.188
.048 - .072
.074 - .109
.119 - .156
.188
.048 - .072
.074 - .109
.119 - .156
.188
.250
.048 - .072
.074 - .109
.119 - .156
.188
.250
.048 - .072
.074 - .109
.119 - .156
.188
.250
.048 - .072
.074 - .109
.119 - .156
.188
.250
.048 - .072
.074 - .109
.119 - .156
.188
.250
.074 - .109
.119 - .156
.188
.250
1/4
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
.198
.198
.198
.198
.198
.198
.198
.228
.228
.228
.228
.280
.280
.280
.280
.280
.280
.280
.280
.280
.280
.366
.366
.366
.366
.366
.366
.366
.366
.366
.366
.414
.414
.414
.414
.414
.479
.479
.479
.479
.150
.150
.150
.150
.150
.150
.150
.188
.188
.188
.188
.228
.228
.228
.228
.228
.228
.228
.228
.228
.228
.295
.295
.295
.295
.295
.295
.295
.295
.295
.295
.347
.347
.347
.347
.347
.406
.406
.406
.406
.050
.080
.125
.050
.080
.125
.188
.050
.080
.125
.188
.050
.080
.125
.188
.250
.050
.080
.125
.188
.250
.050
.080
.125
.188
.250
.050
.080
.125
.188
.250
.050
.080
.125
.188
.250
.080
.125
.188
.250
.200
.170
.125
.262
.232
.187
.125
.262
.232
.187
.124
.325
.295
.250
.187
.125
.325
.295
.250
.187
.125
.387
.357
.312
.249
.187
.387
.357
.312
.249
.187
.450
.420
.375
.312
.250
.482
.437
.374
.312
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
9/16
9/16
9/16
9/16
.164
.164
.164
.210
.210
.210
.210
.208
.208
.208
.208
.236
.236
.236
.236
.236
.236
.236
.236
.236
.236
.292
.292
.292
.292
.292
.292
.292
.292
.292
.292
.358
.358
.358
.358
.358
.418
.418
.418
.418
RETAINERS
ORDER EXAMPLE:
400001 - S - 12
191
1-888-208-2008
RETAINERS
Fax (973) 244-9177
www.accuratescrew.com
SERIES 500000 RETAINER
For Captive Screws, see pages 113-156.
For method of installation, see page 190.
ORDER EXAMPLE:
500001 - S - 1
Basic
Part
Number
RETAINERS
192
Material:
See chart
Finish:
See page
277
Available Material (see page 275)
A
B
S
SS
Aluminum
Brass
Steel
Stainless Steel
Basic
Part
Number
Thread
Panel
Thickness
A
B
C
+.004
-.001
+.005
G
+.000
-.003
+.005
F
+.004
+.010
+.005
-.010
500001
500002
500003
500004
500005
500006
500007
500008
500009
500010
500011
500012
500013
500014
500015
500016
500017
500018
500019
500020
500021
500022
500023
500024
500025
500026
500027
500028
500029
500030
500031
500032
500033
500034
500035
500036
4-40
4-40
4-40
6-32
6-32
6-32
8-32
8-32
8-32
8-32
8-32
10-24
10-24
10-24
10-24
10-24
10-32
10-32
10-32
10-32
10-32
12-24
12-24
12-24
12-24
12-24
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
.052 - .067
.084 - .099
.109 - .140
.052 - .067
.084 - .099
.109 - .140
.052 - .067
.084 - .099
.109 - .140
.171 - .203
.234 - .265
.052 - .067
.084 - .099
.109 - .140
.171 - .203
.234 - .265
.052 - .067
.084 - .099
.109 - .140
.171 - .203
.234 - .265
.052 - .067
.084 - .099
.109 - .140
.171 - .203
.234 - .265
.052 - .067
.084 - .099
.109 - .140
.171 - .203
.234 - .265
.052 - .067
.084 - .099
.109 - .140
.171 - .203
.234 - .265
9/32
9/32
9/32
9/32
9/32
9/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
.250
.250
.250
.250
.250
.250
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.210
.210
.210
.210
.210
.210
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.062
.093
.125
.062
.093
.125
.062
.093
.125
.187
.250
.062
.093
.125
.187
.250
.062
.093
.125
.187
.250
.062
.093
.125
.187
.250
.062
.093
.125
.187
.250
.062
.093
.125
.187
.250
.312
.281
.250
.313
.282
.250
.500
.469
.437
.375
.312
.500
.469
.437
.375
.312
.500
.469
.437
.375
.312
.500
.469
.437
.375
.312
.500
.469
.437
.375
.312
.500
.469
.437
.375
.312
3/8
3/8
3/8
3/8
3/8
3/8
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
.263
.263
.263
.265
.265
.265
.388
.388
.388
.388
.388
.395
.395
.395
.395
.395
.395
.395
.395
.395
.395
.396
.396
.396
.396
.396
.403
.403
.403
.403
.403
.403
.403
.403
.403
.403
D
E
1-888-208-2008
RETAINERS
Fax (973) 244-9177
www.accuratescrew.com
SERIES 550000 RETAINER
For method of installation, see page 190.
Choose appropriate screw
from pages 113-114.
Available Material (see page 275)
A
B
S
SS
Aluminum
Brass
Steel
Stainless Steel
ORDER EXAMPLE:
550001 - S - 1
Basic
Part
Number
Material:
See chart
(see page 198)
Finish:
See page
277
Basic
Part
Number
Thread
Panel
Thickness
A
B
C
D
E
F
G
H
+.004
+.000
-.003
+.004
-.001
+.005
-.000
+.005
+.005
+.010
+.005
-.010
550001
550002
550003
550004
550005
550006
550007
550008
550009
550010
550011
550012
550013
550014
550015
550016
550017
550018
550019
550020
550021
550022
550023
550024
550025
550028
550029
550030
550031
550032
550033
550034
550035
550036
550037
4-40
4-40
4-40
6-32
6-32
6-32
8-32
8-32
8-32
8-32
8-32
10-24
10-24
10-24
10-24
10-24
10-32
10-32
10-32
10-32
10-32
12-24
12-24
12-24
12-24
12-24
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-28
1/4-28
1/4-28
1/4-28
.052/ .067
.084/ .099
.109/ .140
.052/ .067
.084/ .099
.109/ .140
.052/ .067
.084/ .099
.109/ .140
.171/ .203
.234/ .265
.052/ .067
.084/ .099
.109/ .140
.171/ .203
.234/ .265
.052/ .067
.084/ .099
.109/ .140
.171/ .203
.234/ .265
.052/ .067
.084/ .099
.109/ .140
.171/ .203
.234/ .265
.052/ .067
.084/ .099
.109/ .140
.171/ .203
.234/ .265
.084/ .099
.109/ .140
.171/ .203
.234/ .265
9/32
9/32
9/32
9/32
9/32
9/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
.250
.250
.250
.250
.250
.250
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.210
.210
.210
.210
.210
.210
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.192
.192
.192
.192
.192
.192
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.062
.093
.125
.062
.093
.125
.062
.093
.125
.187
.250
.062
.093
.125
.187
.250
.062
.093
.125
.187
.250
.062
.093
.125
.187
.250
.062
.093
.125
.187
.250
.093
.125
.187
.250
.375
.344
.312
.375
.344
.312
.563
.532
.500
.438
.375
.563
.532
.500
.438
.375
.563
.532
.500
.438
.375
.563
.532
.500
.438
.375
.563
.532
.500
.438
.375
.532
.500
.438
.375
7/16
7/16
7/16
7/16
7/16
7/16
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
.263
.263
.263
.266
.266
.266
.388
.388
.388
.388
.388
.393
.393
.393
.393
.393
.393
.393
.393
.393
.393
.397
.397
.397
.397
.397
.405
.405
.405
.405
.405
.405
.405
.405
.405
RETAINERS
Captive Panel Screw and Spring must be
ordered separately.
193
1-888-208-2008
RETAINERS
Fax (973) 244-9177
www.accuratescrew.com
SERIES 600000 RETAINER
For method of installation, see page 190.
Choose appropriate screw
from pages 113, 119.
Available Material (see page 275)
A
B
S
SS
Aluminum
Brass
Steel
Stainless Steel
ORDER EXAMPLE:
600001 - S - 1
Basic
Part
Number
Material:
See chart
Finish:
See page
277
See page 147.
Captive Panel Screw and Retainer Ring must be
ordered separately.
RETAINERS
194
Basic
Part
Number
Thread
Panel
Thickness
A
B
C
D
E
F
G
H
+.004
+.000
-.003
+.004
-.001
+.004
-.001
+.005
+.005
+.010
+.005
-.010
600001
600002
600003
600004
600007
600008
600009
600010
600011
600012
600013
600014
600015
600018
600019
600020
600021
600022
600023
600026
600027
600028
600029
600030
600031
600032
600033
600034
600035
600036
600037
600038
600039
600040
600041
600042
4-40
4-40
4-40
6-32
6-32
6-32
8-32
8-32
8-32
8-32
8-32
10-24
10-24
10-24
10-24
10-24
10-32
10-32
10-32
10-32
10-32
12-24
12-24
12-24
12-24
12-24
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
.052/ .067
.084/ .099
.109/ .140
.052/ .067
.084/ .099
.109/ .140
.052/ .067
.084/ .099
.109/ .140
.171/ .203
.234/ .265
.052/ .067
.084/ .099
.109/ .140
.171/ .203
.234/ .265
.052/ .067
.084/ .099
.109/ .140
.171/ .203
.234/ .265
.052/ .067
.084/ .099
.109/ .140
.171/ .203
.234/ .265
.052/ .067
.084/ .099
.109/ .140
.171/ .203
.234/ .265
.052/ .067
.084/ .099
.109/ .140
.171/ .203
.234/ .265
9/32
9/32
9/32
9/32
9/32
9/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
.250
.250
.250
.250
.250
.250
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.210
.210
.210
.210
.210
.210
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.125
.125
.125
.152
.152
.152
.177
.177
.177
.177
.177
.203
.203
.203
.203
.203
.203
.203
.203
.203
.203
.228
.228
.228
.228
.228
.257
.257
.257
.257
.257
.257
.257
.257
.257
.257
.062
.093
.125
.062
.093
.125
.062
.093
.125
.187
.250
.062
.093
.125
.187
.250
.062
.093
.125
.187
.250
.062
.093
.125
.187
.250
.062
.093
.125
.187
.250
.062
.093
.125
.187
.250
.312
.281
.250
.313
.282
.250
.500
.469
.437
.375
.312
.500
.469
.437
.375
.312
.500
.469
.437
.375
.312
.500
.469
.437
.375
.312
.500
.469
.437
.375
.312
.500
.469
.437
.375
.312
3/8
3/8
3/8
3/8
3/8
3/8
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
.299
.299
.299
.304
.304
.304
.447
.447
.447
.447
.447
.464
.464
.464
.464
.464
.464
.464
.464
.464
.464
.459
.459
.459
.459
.459
.475
.475
.475
.475
.475
.475
.475
.475
.475
.475
1-888-208-2008
RETAINERS
Fax (973) 244-9177
www.accuratescrew.com
SERIES 650000 RETAINER
For method of installation, see page 190.
Choose appropriate screw
from pages 113-114.
Available Material (see page 275)
Aluminum
Brass
Steel
Stainless Steel
ORDER EXAMPLE:
650001 - S - 1
Basic
Part
Number
Material:
See chart
See page 197.
Finish:
See page
277
Captive Panel Screw and Retainer Ring must
be ordered separately.
See page 147.
Basic
Part
Number
Thread
Panel
Thickness
A
B
D
E
F
G
H
J
+.000
-.003
C
+.004
+.004
-.001
+.005
-.000
+.005
+.005
+.010
+.005
-.010
+.004
-.001
650001
650002
650003
650004
650005
650006
650007
650008
650009
650010
650011
650012
650013
650014
650015
650016
650017
650018
650019
650020
650021
650022
650023
650024
650025
650026
650027
650028
650029
650030
650031
650032
650033
650034
650035
650036
4-40
4-40
4-40
6-32
6-32
6-32
8-32
8-32
8-32
8-32
8-32
10-24
10-24
10-24
10-24
10-24
10-32
10-32
10-32
10-32
10-32
12-24
12-24
12-24
12-24
12-24
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
.052/ .067
.084/ .099
.109/ .140
.052/ .067
.084/ .099
.109/ .140
.052/ .067
.084/ .099
.109/ .140
.171/ .203
.234/ .265
.052/ .067
.084/ .099
.109/ .140
.171/ .203
.234/ .265
.052/ .067
.084/ .099
.109/ .140
.171/ .203
.234/ .265
.052/ .067
.084/ .099
.109/ .140
.171/ .203
.234/ .265
.052/ .067
.084/ .099
.109/ .140
.171/ .203
.234/ .265
.052/ .067
.084/ .099
.109/ .140
.171/ .203
.234/ .265
9/32
9/32
9/32
9/32
9/32
9/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
17/32
.250
.250
.250
.250
.250
.250
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.433
.210
.210
.210
.210
.210
.210
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.386
.192
.192
.192
.192
.192
.192
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.062
.093
.125
.062
.093
.125
.062
.093
.125
.187
.250
.062
.093
.125
.187
.250
.062
.093
.125
.187
.250
.062
.093
.125
.187
.250
.062
.093
.125
.187
.250
.062
.093
.125
.187
.250
.375
.344
.312
.375
.344
.312
.563
.532
.500
.438
.375
.563
.532
.500
.438
.375
.563
.532
.500
.438
.375
.563
.532
.500
.438
.375
.563
.532
.500
.438
.375
.563
.532
.500
.438
.375
7/16
7/16
7/16
7/16
7/16
7/16
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
.299
.299
.299
.305
.305
.305
.427
.427
.427
.427
.427
.432
.432
.432
.432
.432
.432
.432
.432
.432
.432
.438
.438
.438
.438
.438
.445
.445
.445
.445
.445
.445
.445
.445
.445
.445
.125
.125
.125
.150
.150
.150
.175
.175
.175
.175
.175
.203
.203
.203
.203
.203
.203
.203
.203
.203
.203
.228
.228
.228
.228
.228
.257
.257
.257
.257
.257
.257
.257
.257
.257
.257
RETAINERS
A
B
S
SS
195
1-888-208-2008
RETAINERS
Fax (973) 244-9177
www.accuratescrew.com
SERIES 700000 RETAINER
- Small Profile
For Captive Screws, see pages 113-156.
RETAINERS
Basic
Part
Number
Thread
Panel
Thickness
A
B
C
D
E
F
G
+.004
+.000
-.003
+.004
-.001
+.005
+.005
+.010
+.005
-.010
700001
700002
700003
700004
700005
700006
700007
700008
700009
700010
700011
700012
700013
700014
700015
700016
700017
700018
700019
700020
700021
700022
700023
700024
700025
700026
700027
700028
700029
700030
700031
700032
700033
700034
700035
700036
700037
700038
700039
700040
4-40
4-40
4-40
6-32
6-32
6-32
8-32
8-32
8-32
8-32
10-24
10-24
10-24
10-24
10-24
10-32
10-32
10-32
10-32
10-32
12-24
12-24
12-24
12-24
12-24
1/4-20
1/4-20
1/4-20
1/4-20
1/4-20
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
5/16-24
5/16-24
5/16-24
5/16-24
5/16-24
.052/ .067
.084/ .099
.109/ .140
.052/ .067
.084/ .099
.109/ .140
.052/ .067
.084/ .099
.109/ .140
.171/ .203
.052/ .067
.084/ .099
.109/ .140
.171/ .203
.234/ .265
.052/ .067
.084/ .099
.109/ .140
.171/ .203
.234/ .265
.052/ .067
.084/ .099
.109/ .140
.171/ .203
.234/ .265
.052/ .067
.084/ .099
.109/ .140
.171/ .203
.234/ .265
.052/ .067
.084/ .099
.109/ .140
.171/ .203
.234/ .265
.052/ .067
.084/ .099
.109/ .140
.171/ .203
.234/ .265
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
.188
.188
.188
.188
.188
.188
.218
.218
.218
.218
.270
.270
.270
.270
.270
.270
.270
.270
.270
.270
.270
.270
.270
.270
.270
.356
.356
.356
.356
.356
.356
.356
.356
.356
.356
.404
.404
.404
.404
.404
.150
.150
.150
.150
.150
.150
.188
.188
.188
.188
.228
.228
.228
.228
.228
.228
.228
.228
.228
.228
.228
.228
.228
.228
.228
.295
.295
.295
.295
.295
.295
.295
.295
.295
.295
.343
.343
.343
.343
.343
.062
.093
.125
.062
.093
.125
.062
.093
.125
.187
.062
.093
.125
.187
.250
.062
.093
.125
.187
.250
.062
.093
.125
.187
.250
.062
.093
.125
.187
.250
.062
.093
.125
.187
.250
.062
.093
.125
.187
.250
.188
.157
.125
.250
.219
.188
.250
.219
.187
.125
.313
.282
.250
.188
.125
.313
.282
.250
.188
.125
.313
.282
.250
.188
.125
.375
.344
.312
.250
.187
.375
.344
.312
.250
.187
.375
.344
.312
.250
.187
1/4
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
.161
.161
.161
.210
.210
.210
.210
.210
.210
.210
.236
.236
.236
.236
.236
.236
.236
.236
.236
.236
.239
.239
.239
.239
.239
.295
.295
.295
.295
.295
.295
.295
.295
.295
.295
.297
.297
.297
.297
.297
SERIES 750000 RETAINER
196
Available Material (see page 275)
A
B
S
SS
Aluminum
Brass
Steel
Stainless Steel
ORDER EXAMPLE:
700001 - S - 1
Basic
Part
Number
- Heavy Duty
Thread
Panel
Thickness
A
B
C
D
E
F
G
+.004
+.000
-.003
+.004
-.001
+.005
+.005
+.005
+.005
-.010
750001 6-32
750002 6-32
750003 6-32
750004 8-32
750005 8-32
750006 8-32
750007 10-32
750008 10-32
750009 10-32
750010 12-24
750011 12-24
750012 12-24
750013 1/4-20
750014 1/4-20
750015 1/4-20
.109/ .140
.171/ .203
.234/ .265
.109/ .140
.171/ .203
.234/ .265
.109/ .140
.171/ .203
.234/ .265
.109/ .140
.171/ .203
.234/ .265
.109/ .140
.171/ .203
.234/ .265
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
9/16
.406
.406
.406
.406
.406
.406
.406
.406
.406
.406
.406
.406
.406
.406
.406
.343
.343
.343
.343
.343
.343
.343
.343
.343
.343
.343
.343
.343
.343
.343
.165
.230
.290
.165
.230
.290
.165
.230
.290
.165
.230
.290
.165
.230
.290
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.312
.477
.542
.602
.477
.542
.602
.477
.542
.602
.477
.542
.602
.477
.542
.602
.242
.307
.367
.248
.315
.373
.252
.318
.378
.256
.321
.381
.261
.326
.386
Basic
Part
Number
For method of installation, see page 190.
Material:
See chart
Finish:
See page
277
1-888-208-2008
RETAINERS
Fax (973) 244-9177
www.accuratescrew.com
PANEL SCREW RETAINER WASHERS
Special Internal Thread
Available Material
(see page 275)
ORDER EXAMPLE:
W114050 - SS - 12
Basic
Part
Number
Material:
See chart
Part
Number
Screw
Size
W114050
W114080
W114052
W114082
W114054
W114056
2
2
4
4
6
8
OD
+.020
-.005
.187
.250
.255
.312
.312
.312
A
B
S
SS
Finish:
See page
277
Aluminum
Brass
Steel
Stainless Steel
+.005
Part
Number
Screw
Size
.020
.020
.030
.030
.030
.030
W114066
W114086
W114058
W114068
W114051
W114061
8
8
10
10
1/4
1/4
Thk
OD
Thk
+.020
-.005
+.005
.375
.500
.375
.500
.500
.562
.030
.030
.030
.030
.045
.045
Solid washers thread easily
over any captive screw.
PANEL SCREW RETAINER WASHERS
Used with 600000-650000 Retainers
Basic Part Number
Available Material (see page 275)
SS
N
Material: See chart
Stainless Steel
Part No.
Thread
Ref
ID
OD
T
+.005
+.005
Nylon
Part No.
800007 SS
800008 SS
800009 SS
800010 SS
800011 SS
800012 SS
800013 SS
800014 SS
800015 SS
800016 SS
800016aSS
2-56
4-40
6-32
8-32
10-24
10-32
12-24
1/4-20
1/4-28
5/16-24
5/16-18
.075
.093
.112
.146
.166
.166
.190
.204
.214
.265
.265
.156
.171
.171
.312
.312
.312
.312
.312
.312
.375
.375
.010
.010
.010
.012
.012
.012
.012
.012
.012
.010
.010
800007 N
800000 N
800001 N
800002 N
800003 N
800004 N
800005 N
800006 N
800007aN
800007bN
800007cN
Available Material (see page 275)
Stainless Steel Wire
ASTM-A-313,Type 302, Cond. B
Used with 4-40 or 6-32
Threaded Panel Screws
COMPRESSED HEIGHT APPROX. .06
STAINLESS
STEEL
Stainless Steel, type 303
ASTM-A-581-582
Nylon
Ref
ID
OD
T
+.005
+.005
.075
.100
.125
.152
.167
.173
.193
.228
.228
.265
.265
.156
.171
.171
.312
.312
.312
.312
.312
.312
.375
.375
.010
.015
.020
.020
.020
.020
.020
.030
.030
.031
.031
Thread
2-56
4-40
6-32
8-32
10-24
10-32
12-24
1/4-20
1/4-28
5/16-24
5/16-18
RETAINERS
ORDER EXAMPLE:
800007 - SS
(see pages 194-195)
NYLON
STAINLESS STEEL SPRINGS
For Retainers 550000-650000
(see pages 193-195)
Used with 8-32 up to or 1/4-28
Threaded Panel Screws
COMPRESSED HEIGHT APPROX. .12
Used with 2-56
Threaded Panel Screws
COMPRESSED HEIGHT APPROX. .18
METRIC SPRINGS
Part No.
MEX-4
Part No.
Part No.
Part No.
EX-1
EX-2
EX-3
Part No.
MEX-5
197
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
FLAT WASHERS
Tolerances
A = +.020
-.005
B = +.010
C = +.003
+.006
+.009
+.010
up to .032 thick
.033 to .062 thick
.063 to .093 thick
for .094 and over
Tighter tolerances for the A, B, & C
dimensions can be provided. See
order example.
C Thickness:
See chart or
fill in any length
Material:
See chart
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Recommended
Thickness “C”
.010
.015
.020
.030
.040
.045
.060
.062
.093
.125
.156
.187
.250
.312
.375
.437
.500
Available Material (see page 275)
ORDER EXAMPLE:
10 - .015 - S - 1
Basic
Part
Number
Color
A
B
C
S
SS
N
D
GM
GS
Finish:
See page 277
EXAMPLE FOR NYLON AND DELRIN PARTS: 10-015-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 10-.015-S-1 (A = .443 + .005)
See chart for recommended thickness C, but any thickness can be ordered.
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Melamine G 5
Glass Silicone G 7
Ph
Phl
L
PA
PP
T
F
GE
UL*
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
Glass Epoxy G10
ULTEM 1000
* ULTEM 1000 - UL Rating 94V-0
Screw
Size
WASHERS
0
198
B
ID
.022
.026
.028
.030
.031
.036
.036
.036
.036
.037
.038
.039
.039
.039
.041
.042
.043
.045
.047
.048
.051
.051
.052
.053
.054
.055
.055
.056
.057
.058
A
OD
.040
.100
.186
.105
.309
.093
.125
.187
.860
.078
.422
.250
.373
.750
.615
.433
.732
.306
.208
.121
.165
1.650
.250
.510
.375
.156
.396
.150
.182
.627
Basic
Part No.
10
10a
10b
10c
10d
10e
11
12
12a
13
13a
13b
13c
13d
13e
13f
13g
13h
13k
14
14a
14b
14c
14d
15
16
16a
16b
16c
16d
C
Thickness
Material Finish
Screw
Size
0
B
ID
.060
.060
.060
.061
.061
.062
.062
.062
.062
.062
.062
.063
.063
.063
.063
.063
.063
.063
.064
.064
.064
.065
.065
.066
.066
.066
.066
.066
.067
.067
A
OD
.156
.310
1.568
.141
.162
.125
.180
.218
.262
.312
.480
.086
.187
.250
.407
.498
.750
.900
.186
.435
.535
.156
.187
.234
.400
.530
.600
.686
.219
.281
Basic
Part No.
100
100a
100b
100c
100d
17
18
19
19a
19b
19c
20
20a
20b
20c
20d
20e
20f
20g
20h
20k
20j
105
105a
105b
105c
105d
105e
21
21a
C
Thickness
Material
Finish
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
FLAT WASHERS
Tolerances
A = +.020
-.005
B = +.010
C = +.003
+.006
+.009
+.010
up to .032 thick
.033 to .062 thick
.063 to .093 thick
for .094 and over
Tighter tolerances for the A, B, & C
dimensions can be provided. See
order example.
C Thickness:
See chart or
fill in any length
Material:
See chart
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Recommended
Thickness “C”
.010
.015
.020
.030
.040
.045
.060
.062
.093
.125
.156
.187
.250
.312
.375
.437
.500
Available Material (see page 275)
ORDER EXAMPLE:
22 - .015 - S - 1
Basic
Part
Number
Color
A
B
C
S
SS
N
D
GM
GS
Finish:
See page 277
EXAMPLE FOR NYLON AND DELRIN PARTS: 22-015-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 22-.015-S-1 (A = .373 + .005)
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Melamine G 5
Glass Silicone G 7
Ph
Phl
L
PA
PP
T
F
GE
UL*
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
Glass Epoxy G10
ULTEM 1000
* ULTEM 1000 - UL Rating 94V-0
0
1
B
ID
.067
.067
.067
.068
.068
.068
.069
.070
.070
.070
.071
.072
.074
.075
.075
.076
.077
.077
.077
.078
.078
.078
.078
.079
.080
.080
.080
.081
.081
.081
A
OD
.375
.533
.625
.130
.200
.235
.218
.185
.220
.235
.425
.500
.251
.156
.195
.650
.191
.483
1.000
.187
.210
.289
.375
.434
.187
1.125
1.870
.180
.373
.494
Basic
Part No.
22
22a
22b
23
23a
23b
23c
23d
23e
24
24a
24b
24c
25
25a
25b
25c
25d
25e
26
27
27a
28
28a
110
110a
110b
110c
110d
110e
C
Thickness
Material Finish
Screw
Size
1
2
B
ID
.082
.082
.083
.085
.085
.086
.087
.087
.088
.088
.088
.088
.089
.089
.089
.089
.089
.089
.089
.089
.090
.090
.090
.090
.090
.090
.091
.091
.091
.091
A
OD
.180
.180
.250
.496
.705
.185
.624
.749
.215
.312
.370
1.180
.149
.180
.187
.188
.248
.281
.725
1.185
.250
.312
.388
.440
.530
.750
.220
.275
.621
.746
Basic
Part No.
29
29a
30
30a
30b
30c
30d
30e
30f
30g
30h
30k
31
31a
120
32
32a
33
33a
33b
115
115a
115b
115c
115d
115e
115f
115g
115h
115k
C
Thickness
Material
Finish
WASHERS
Screw
Size
199
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
FLAT WASHERS
Tolerances
A = +.020
-.005
B = +.010
C = +.003
+.006
+.009
+.010
up to .032 thick
.033 to .062 thick
.063 to .093 thick
for .094 and over
Tighter tolerances for the A, B, & C
dimensions can be provided. See
order example.
ORDER EXAMPLE:
34 - .015 - S - 1
Basic
Part
Number
C Thickness:
See chart or
fill in any length
Material:
See chart
Finish:
See page 277
EXAMPLE FOR NYLON AND DELRIN PARTS: 34-015-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 34-.015-S-1 (A = .250 + .005)
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Recommended
Thickness “C”
.010
.015
.020
.030
.040
.045
.060
.062
.093
.125
.156
.187
.250
.312
.375
.437
.500
Available Material (see page 275)
A
B
C
S
SS
N
D
GM
GS
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Melamine G 5
Glass Silicone G 7
Ph
Phl
L
PA
PP
T
F
GE
UL*
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
Glass Epoxy G10
ULTEM 1000
* ULTEM 1000 - UL Rating 94V-0
Screw
Size
WASHERS
2
200
B
ID
.092
.093
.093
.093
.093
.093
.093
.093
.093
.093
.093
.094
.094
.094
.094
.094
.094
.094
.094
.094
.095
.095
.095
.095
.095
.096
.096
.096
.096
.096
A
OD
.970
.156
.187
.203
.250
.272
.312
.369
.625
.700
1.499
.186
.250
.375
.395
.499
.552
.623
.643
.809
.312
.313
.375
.445
.629
.219
.270
.498
.572
.625
Basic
Part No.
115j
34
35
35a
36
36a
36b
36c
37
37a
37b
37c
37d
38
39
39a
39b
39c
40
40a
40b
41
41a
41b
41c
42
42a
42b
42c
42d
C
Thickness
Material Finish
Screw
Size
2
2
2
2
2
3
3
3
2
3
2
2
2
2
3
2
2
2
3
3
3
2
3
3
3
3
3
3
3
3
B
ID
.096
.096
.097
.097
.097
.098
.098
.098
.098
.098
.099
.099
.099
.099
.100
.100
.100
.100
.100
.100
.101
.101
.102
.103
.104
.104
.104
.105
.105
.105
A
Basic
OD
Part No.
.652
42e
.809
42f
.300
42g
.315
42h
.372
42k
.236
42j
.283 42L
.410
43
.500
43a
.750
43b
.250
44
.374
44a
.402
44b
.472
44c
.190
45
.249
45a
.300
45b
.375
45c
.740
45d
.746
45e
.370
45f
.714
45g
.500
45h
.250
45k
.312
45j
.537
45L
.562
45m
.250
125
.260
46
.313
46a
C
Thickness
Material
Finish
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
FLAT WASHERS
Tolerances
A = +.020
-.005
B = +.010
C = +.003
+.006
+.009
+.010
up to .032 thick
.033 to .062 thick
.063 to .093 thick
for .094 and over
Tighter tolerances for the A, B, & C
dimensions can be provided. See
order example.
C Thickness:
See chart or
fill in any length
Material:
See chart
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Recommended
Thickness “C”
.010
.015
.020
.030
.040
.045
.060
.062
.093
.125
.156
.187
.250
.312
.375
.437
.500
Available Material (see page 275)
ORDER EXAMPLE:
46b - .015 - S - 1
Basic
Part
Number
Color
A
B
C
S
SS
N
D
GM
GS
Finish:
See page 277
EXAMPLE FOR NYLON AND DELRIN PARTS: 46b-015-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 46b-.015-S-1 (A = .500 + .005)
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Melamine G 5
Glass Silicone G 7
Ph
Phl
L
PA
PP
T
F
GE
UL*
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
Glass Epoxy G10
ULTEM 1000
* ULTEM 1000 - UL Rating 94V-0
3
B
ID
.105
.106
.106
.108
.108
.108
.108
.109
.110
.110
.110
.110
.111
.112
.113
.113
.114
.114
.115
.115
.115
.115
.115
.115
.115
.116
.116
.117
.117
.117
A
OD
.397
.187
.295
.187
.251
.308
.405
.343
.185
.218
.248
.375
.714
.435
.188
.327
.375
1.703
.147
.187
.209
.214
.270
.500
.590
.634
.810
.250
.369
.765
Basic
Part No.
46b
46c
46d
46e
46f
46g
46h
47
47a
48
49
49a
49b
49c
49d
49e
49f
49g
50
50a
51
52
53
54
54a
54b
54c
54d
54e
54f
C
Thickness
Material Finish
Screw
Size
4
B
ID
.117
.118
.118
.118
.118
.118
.118
.118
.118
.118
.118
.118
.118
.118
.118
.118
.119
.119
.119
.119
.119
.119
.120
.120
.120
.120
.120
.120
.120
.120
A
OD
1.000
.150
.185
.248
.275
.280
.311
.342
.387
.439
.488
.560
.600
.652
.714
.736
.230
.250
.310
.470
.687
.703
.180
.192
.214
.260
.280
.281
.310
.314
Basic
Part No.
54g
55
55a
55b
55c
55d
55e
55f
55g
55h
55k
55j
55L
55m
55n
55p
56
130
130a
130b
130c
130d
57
57a
58
58a
59
135
60
61
C
Thickness
Material
Finish
WASHERS
Screw
Size
201
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
FLAT WASHERS
Tolerances
A = +.020
-.005
B = +.010
C = +.003
+.006
+.009
+.010
up to .032 thick
.033 to .062 thick
.063 to .093 thick
for .094 and over
Tighter tolerances for the A, B, & C
dimensions can be provided. See
order example.
C Thickness:
See chart or
fill in any length
Material:
See chart
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Recommended
Thickness “C”
.010
.015
.020
.030
.040
.045
.060
.062
.093
.125
.156
.187
.250
.312
.375
.437
.500
Available Material (see page 275)
ORDER EXAMPLE:
61a - .015 - S - 1
Basic
Part
Number
Color
A
B
C
S
SS
N
D
GM
GS
Finish:
See page 277
EXAMPLE FOR NYLON AND DELRIN PARTS: 61a-015-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 61a-.015-S-1 (A = .312 + .005)
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Melamine G 5
Glass Silicone G 7
Ph
Phl
L
PA
PP
T
F
GE
UL*
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
Glass Epoxy G10
ULTEM 1000
* ULTEM 1000 - UL Rating 94V-0
Screw
Size
WASHERS
4
202
B
ID
.120
.120
.120
.120
.120
.120
.122
.123
.124
.124
.124
.124
.124
.124
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
A
OD
.406
.430
.450
.700
1.062
1.782
.498
.375
.187
.203
.250
.312
.500
.655
.187
.247
.250
.281
.310
.312
.375
.432
.500
.714
.870
.960
1.150
1.308
1.325
1.425
Basic
Part No.
61a
61b
61c
61d
61e
61f
61g
61h
61k
62
62a
62b
63
63a
63b
63c
64
65
66
67
67a
67b
67c
67d
67e
67f
67g
67h
67k
67j
C
Thickness
Material Finish
Screw
Size
4
5
B
ID
.125
.125
.125
.125
.125
.126
.126
.126
.126
.126
.126
.127
.127
.127
.127
.127
.127
.128
.128
.128
.128
.128
.128
.128
.128
.128
.128
.128
.128
.129
A
OD
1.436
1.625
1.745
.250
.358
.360
.381
.437
.498
.623
1.328
.253
.310
.550
.876
1.184
1.250
.190
.238
.250
.300
.410
.440
.528
.600
.609
.625
.748
1.190
.188
Basic
Part No.
67L
67m
67n
67p
67r
68
68a
68b
68c
68d
68e
68f
68g
68h
68k
68j
68L
68m
69
69a
69b
70
71
71a
71b
71c
71d
72
72a
73
C
Thickness
Material
Finish
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
FLAT WASHERS
Tolerances
A = +.020
-.005
B = +.010
C = +.003
+.006
+.009
+.010
up to .032 thick
.033 to .062 thick
.063 to .093 thick
for .094 and over
Tighter tolerances for the A, B, & C
dimensions can be provided. See
order example.
C Thickness:
See chart or
fill in any length
Material:
See chart
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Recommended
Thickness “C”
.010
.015
.020
.030
.040
.045
.060
.062
.093
.125
.156
.187
.250
.312
.375
.437
.500
Available Material (see page 275)
ORDER EXAMPLE:
73a - .015 - S - 1
Basic
Part
Number
Color
A
B
C
S
SS
N
D
GM
GS
Finish:
See page 277
EXAMPLE FOR NYLON AND DELRIN PARTS: 73a-015-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 73a-.015-S-1 (A = .625 + .005)
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Melamine G 5
Glass Silicone G 7
Ph
Phl
L
PA
PP
T
F
GE
UL*
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
Glass Epoxy G10
ULTEM 1000
* ULTEM 1000 - UL Rating 94V-0
5
B
ID
.129
.129
.129
.129
.129
.129
.129
.129
.129
.129
.129
.129
.130
.130
.130
.130
.130
.130
.130
.130
.130
.130
.130
.130
.130
.130
.130
.131
.131
.131
A
OD
.234
.250
.279
.311
.324
.375
.437
.500
.552
.682
.750
.815
.234
.250
.296
.312
.317
.374
.386
.430
.597
.625
.688
.855
1.160
1.473
1.500
.355
.555
.950
Basic
Part No.
73a
74
74a
74b
75
75a
75b
75c
75d
75e
75f
75g
76
76a
76b
76c
77
77a
77b
77c
77d
77e
78
78a
78b
78c
78d
78e
78f
78g
C
Thickness
Material Finish
Screw
Size
5
B
ID
.131
.132
.132
.132
.132
.133
.133
.133
.133
.134
.134
.134
.135
.135
.135
.135
.136
.136
.136
.136
.137
.137
.137
.137
.137
.137
.138
.138
.139
.139
A
OD
.998
.312
.345
.372
.623
.240
.437
.627
.875
.250
.312
1.140
.175
.235
.270
.278
.250
.438
.500
.748
.249
.311
.406
.623
.707
.829
.250
.579
.748
1.325
Basic
Part No.
78h
78k
78j
79
79a
80
80a
80b
80c
80d
80e
80f
81
81a
81b
81c
82
82a
82b
82c
82d
82e
83
83a
84
84a
84b
84c
84d
84e
C
Thickness
Material
Finish
WASHERS
Screw
Size
203
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
FLAT WASHERS
Tolerances
A = +.020
-.005
B = +.010
C = +.003
+.006
+.009
+.010
up to .032 thick
.033 to .062 thick
.063 to .093 thick
for .094 and over
Tighter tolerances for the A, B, & C
dimensions can be provided. See
order example.
C Thickness:
See chart or
fill in any length
Material:
See chart
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Recommended
Thickness “C”
.010
.015
.020
.030
.040
.045
.060
.062
.093
.125
.156
.187
.250
.312
.375
.437
.500
Available Material (see page 275)
ORDER EXAMPLE:
84f - .015 - S - 1
Basic
Part
Number
Color
A
B
C
S
SS
N
D
GM
GS
Finish:
See page 277
EXAMPLE FOR NYLON AND DELRIN PARTS: 84f-015-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 84f-.015-S-1 (A = .500 + .005)
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Melamine G 5
Glass Silicone G 7
Ph
Phl
L
PA
PP
T
F
GE
UL*
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
Glass Epoxy G10
ULTEM 1000
* ULTEM 1000 - UL Rating 94V-0
Screw
Size
WASHERS
6
204
B
ID
.140
.140
.140
.140
.140
.140
.140
.140
.140
.140
.141
.141
.141
.141
.141
.141
.141
.142
.142
.142
.142
.142
.142
.143
.143
.143
.143
.143
.144
.144
A
OD
.247
.280
.305
.312
.375
.550
.714
1.180
1.250
1.299
.247
.250
.265
.376
.432
.437
1.325
.281
.311
.373
.500
.505
1.000
.283
.312
.353
.460
.531
.247
.312
Basic
Part No.
84f
140
140a
85
86
86a
86b
86c
86d
86e
86f
88
88a
88b
89
89a
89b
89c
89d
89e
89f
90
90a
90b
90c
90d
90e
90f
90g
90h
C
Thickness
Material Finish
Screw
Size
6
B
ID
.144
.144
.144
.144
.144
.145
.145
.145
.145
.145
.145
.145
.145
.145
.145
.145
.145
.146
.146
.146
.146
.146
.147
.147
.147
.147
.147
.147
.147
.147
A
OD
.375
.476
.500
.821
1.370
.185
.242
.251
.280
.342
.390
.402
.406
.559
.625
.640
.750
.250
.270
.312
.370
.750
.250
.268
.312
.375
.400
.437
.500
.576
Basic
Part No.
91
91a
91b
91c
91d
92
92a
92b
92c
92d
92e
92f
93
93a
93b
94
95
95a
96
96a
96b
96c
97
97a
145
98
98a
98b
99
99a
C
Thickness
Material
Finish
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
FLAT WASHERS
Tolerances
A = +.020
-.005
B = +.010
C = +.003
+.006
+.009
+.010
up to .032 thick
.033 to .062 thick
.063 to .093 thick
for .094 and over
Tighter tolerances for the A, B, & C
dimensions can be provided. See
order example.
C Thickness:
See chart or
fill in any length
Material:
See chart
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Recommended
Thickness “C”
.010
.015
.020
.030
.040
.045
.060
.062
.093
.125
.156
.187
.250
.312
.375
.437
.500
Available Material (see page 275)
ORDER EXAMPLE:
99b - .015 - S - 1
Basic
Part
Number
Color
A
B
C
S
SS
N
D
GM
GS
Finish:
See page 277
EXAMPLE FOR NYLON AND DELRIN PARTS: 99b-015-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 99b-.015-S-1 (A = .400 + .005)
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Melamine G 5
Glass Silicone G 7
Ph
Phl
L
PA
PP
T
F
GE
UL*
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
Glass Epoxy G10
ULTEM 1000
* ULTEM 1000 - UL Rating 94V-0
6
B
ID
.147
.147
.147
.147
.147
.148
.148
.148
.149
.149
.149
.149
.150
.150
.150
.150
.150
.150
.150
.151
.151
.151
.151
.151
.152
.152
.152
.153
.155
.155
A
OD
.590
.622
.688
.748
1.000
.314
.419
.623
.187
.374
.435
.470
.312
.345
.375
.500
.633
.916
1.000
.312
.400
.443
.625
1.028
.250
.528
1.250
.500
.250
.312
Basic
Part No.
99b
99c
99d
99e
101
101a
101b
101c
101d
101e
101f
101g
101h
101k
101j
101L
102
102a
102b
102c
102d
104
104a
104b
104c
104d
106
106a
106b
106c
C
Thickness
Material Finish
Screw
Size
6
B
ID
.155
.155
.155
.156
.156
.156
.156
.156
.156
.156
.156
.156
.156
.157
.157
.157
.157
.157
.158
.158
.158
.158
.158
.158
.158
.158
.158
.159
.159
.159
A
OD
.750
1.125
1.295
.250
.312
.385
.438
.638
.998
1.050
1.187
1.500
1.832
.312
.375
.500
.995
1.325
.248
.355
.375
.440
.470
.531
.562
.619
.685
.312
.345
.373
Basic
Part No.
106d
106e
106f
106g
107
107a
108
108a
108b
108c
108d
108e
108f
108g
108h
108k
108j
108L
108m
108n
108p
108r
108s
108t
108u
108v
108w
108x
108y
108z
C
Thickness
Material
Finish
WASHERS
Screw
Size
205
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
FLAT WASHERS
Tolerances
A = +.020
-.005
B = +.010
C = +.003
+.006
+.009
+.010
up to .032 thick
.033 to .062 thick
.063 to .093 thick
for .094 and over
Tighter tolerances for the A, B, & C
dimensions can be provided. See
order example.
C Thickness:
See chart or
fill in any length
Material:
See chart
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Recommended
Thickness “C”
.010
.015
.020
.030
.040
.045
.060
.062
.093
.125
.156
.187
.250
.312
.375
.437
.500
Available Material (see page 275)
ORDER EXAMPLE:
109 - .015 - S - 1
Basic
Part
Number
Color
A
B
C
S
SS
N
D
GM
GS
Finish:
See page 277
EXAMPLE FOR NYLON AND DELRIN PARTS: 109-015-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 109-.015-S-1 (A = .400 + .005)
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Melamine G 5
Glass Silicone G 7
Ph
Phl
L
PA
PP
T
F
GE
UL*
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
Glass Epoxy G10
ULTEM 1000
* ULTEM 1000 - UL Rating 94V-0
Screw
Size
WASHERS
6
206
B
ID
.159
.160
.160
.160
.160
.160
.160
.160
.160
.161
.161
.161
.161
.161
.161
.162
.162
.162
.162
.162
.162
.162
.163
.164
.164
.164
.164
.164
.165
.165
A
OD
.375
.250
.323
.434
.547
.562
.749
.830
1.120
.250
.343
.560
.621
.650
.749
.250
.313
.375
.386
.495
.540
1.100
.920
.250
.360
.438
.454
1.556
.312
.490
Basic
Part No.
109
109a
109b
109c
109d
111
111a
111b
111c
111d
111e
111f
111g
111h
111k
111j
111m
111n
111p
111r
111s
111t
111u
111v
111w
112
113
113a
113b
113c
C
Thickness
Material Finish
Screw
Size
6
8
B
ID
.165
.165
.165
.165
.166
.166
.166
.166
.167
.167
.167
.167
.167
.168
.168
.168
.168
.168
.168
.168
.169
.169
.169
.169
.170
.170
.170
.170
.170
.170
A
OD
.562
.565
1.065
1.165
.250
.561
.696
.750
.250
.277
.300
.425
.490
.250
.373
.375
.500
.624
.875
1.570
.250
.437
.472
1.704
.250
.275
.315
.360
.390
.440
Basic
Part No.
113d
113e
113f
113g
113h
113k
113j
113m
132
114
114a
116
116a
116b
116c
150
117
117a
117b
117c
117d
117e
117f
117g
117h
117k
117j
118
119
119a
C
Thickness
Material
Finish
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
FLAT WASHERS
Tolerances
A = +.020
-.005
B = +.010
C = +.003
+.006
+.009
+.010
up to .032 thick
.033 to .062 thick
.063 to .093 thick
for .094 and over
Tighter tolerances for the A, B, & C
dimensions can be provided. See
order example.
C Thickness:
See chart or
fill in any length
Material:
See chart
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Recommended
Thickness “C”
.010
.015
.020
.030
.040
.045
.060
.062
.093
.125
.156
.187
.250
.312
.375
.437
.500
Available Material (see page 275)
ORDER EXAMPLE:
119b - .015 - S - 1
Basic
Part
Number
Color
A
B
C
S
SS
N
D
GM
GS
Finish:
See page 277
EXAMPLE FOR NYLON AND DELRIN PARTS: 119b-015-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 119b-.015-S-1 (A = .750 + .005)
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Melamine G 5
Glass Silicone G 7
Ph
Phl
L
PA
PP
T
F
GE
UL*
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
Glass Epoxy G10
ULTEM 1000
* ULTEM 1000 - UL Rating 94V-0
8
B
ID
.170
.170
.170
.170
.170
.170
.171
.171
.171
.171
.171
.171
.172
.172
.172
.172
.172
.172
.172
.172
.173
.173
.173
.173
.173
.174
.174
.174
.174
.174
A
OD
.500
.785
.877
1.000
1.280
1.490
.312
.378
.406
.625
.750
.997
.250
.346
.376
.410
.437
.750
1.000
1.325
.375
.625
.748
1.000
1.627
.290
.310
.375
.439
.500
Basic
Part No.
119b
119c
119d
119e
119f
119g
121
121a
121b
121c
122
122a
122b
122c
122d
123
124
126
126a
126b
127
128
128a
129
129a
131
131a
133
133a
133b
C
Thickness
Material Finish
Screw
Size
8
10
B
ID
.174
.175
.175
.175
.175
.176
.177
.177
.177
.178
.180
.182
.185
.187
.187
.187
.188
.188
.188
.189
.190
.190
.191
.192
.192
.192
.192
.193
.195
.195
A
OD
.937
.343
.373
.875
1.320
.434
.275
.500
1.438
.562
.875
.278
.437
.312
.380
1.791
.260
.500
1.400
.750
.322
.640
.522
.343
.370
.406
.468
.500
.245
.354
Basic
Part No.
133c
134
134a
134b
134c
134d
136
137
138
139
141
142
143
144
146
147
148
149
151
152
153
154
156
157
158
159
161
162
163
164
C
Thickness
Material
Finish
WASHERS
Screw
Size
207
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
FLAT WASHERS
Tolerances
A = +.020
-.005
B = +.010
C = +.003
+.006
+.009
+.010
up to .032 thick
.033 to .062 thick
.063 to .093 thick
for .094 and over
Tighter tolerances for the A, B, & C
dimensions can be provided. See
order example.
ORDER EXAMPLE:
155 - .015 - S - 1
Basic
Part
Number
C Thickness:
See chart or
fill in any length
Material:
See chart
Finish:
See page 277
EXAMPLE FOR NYLON AND DELRIN PARTS: 155-015-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 155-.015-S-1 (A = .375 + .005)
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Recommended
Thickness “C”
.010
.015
.020
.030
.040
.045
.060
.062
.093
.125
.156
.187
.250
.312
.375
.437
.500
Available Material (see page 275)
A
B
C
S
SS
N
D
GM
GS
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Melamine G 5
Glass Silicone G 7
Ph
Phl
L
PA
PP
T
F
GE
UL*
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
Glass Epoxy G10
ULTEM 1000
* ULTEM 1000 - UL Rating 94V-0
Screw
Size
WASHERS
10
12
208
B
ID
.195
.196
.196
.196
.198
.199
.199
.199
.199
.200
.200
.200
.201
.202
.203
.203
.203
.203
.209
.219
.219
.220
.220
.221
.222
.222
.222
.222
.222
.222
A
OD
.437
.375
.437
.750
.683
.312
.500
.750
1.500
.325
.359
.500
.460
.632
.309
.375
.437
.469
.438
.390
.443
.365
.635
.468
.300
.372
.500
.730
1.000
1.130
Basic
Part No.
155
166
167
168
169
171
172
173
174
176
177
179
181
182
183
184
187
188
160
189
191
192
193
196
198
210
202
203
204
206
C
Thickness
Material Finish
Screw
Size
1/4
B
ID
.222
.251
.252
.252
.252
.252
.252
.253
.253
.253
.254
.254
.254
.255
.255
.255
.255
.255
.256
.257
.257
.257
.257
.258
.258
.258
.259
.260
.260
.260
A
OD
1.500
.329
.420
.450
.500
.592
.752
.470
.562
.878
.400
.622
1.063
.340
.375
.481
.505
1.062
.695
.410
.620
.694
1.125
.318
.747
1.443
.875
.300
.400
.473
Basic
Part No.
207
208
209
9745
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
C
Thickness
Material
Finish
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
FLAT WASHERS
Tolerances
A = +.020
-.005
B = +.010
C = +.003
+.006
+.009
+.010
up to .032 thick
.033 to .062 thick
.063 to .093 thick
for .094 and over
Tighter tolerances for the A, B, & C
dimensions can be provided. See
order example.
ORDER EXAMPLE:
237 - .015 - S - 1
Basic
Part
Number
C Thickness:
See chart or
fill in any length
Material:
See chart
Finish:
See page 277
EXAMPLE FOR NYLON AND DELRIN PARTS: 237-015-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 237-.015-S-1 (A = .870 + .005)
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Recommended
Thickness “C”
.010
.015
.020
.030
.040
.045
.060
.062
.093
.125
.156
.187
.250
.312
.375
.437
.500
Available Material (see page 275)
A
B
C
S
SS
N
D
GM
GS
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Melamine G 5
Glass Silicone G 7
Ph
Phl
L
PA
PP
T
F
GE
UL*
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
Glass Epoxy G10
ULTEM 1000
* ULTEM 1000 - UL Rating 94V-0
1/4
B
ID
.260
.260
.260
.260
.260
.261
.261
.261
.263
.263
.263
.263
.265
.265
.265
.265
.265
.265
.265
.266
.267
.268
.270
.270
.270
.270
.273
.274
.276
.280
.281
A
OD
.500
.562
.625
.687
1.000
.375
1.000
1.500
.432
.500
.510
.800
.375
.430
.500
.562
.625
.870
1.125
.408
.523
.580
.750
1.000
1.130
1.250
1.375
.438
.500
.562
.625
Basic
Part No.
237
238
239
178
240
241
242
243
244
245A
245
246
247
248
249
165
175
250
251
252
253
254
255
256
257
258
259
260
261
170
262
C
Thickness
Material Finish
Screw
Size
1/4
5/16
B
ID
.282
.282
.283
.283
.284
.284
.289
.295
.296
.300
.300
.310
.310
.311
.312
.312
.312
.312
.312
.312
.312
.314
.314
.315
.315
.315
.315
.315
.316
.317
.318
A
OD
.361
.750
.495
.512
.420
.543
.555
.574
.375
.750
1.997
.687
.875
.544
.500
.562
.625
.734
.750
1.000
1.250
.420
.512
.370
.484
.500
.562
1.156
.600
.739
.437
Basic
Part No.
263
264
265
266
267
268
269
270
271
273
9748
9747
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
C
Thickness
Material
Finish
WASHERS
Screw
Size
209
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
FLAT WASHERS
Tolerances
A = +.020
-.005
B = +.010
C = +.003
+.006
+.009
+.010
up to .032 thick
.033 to .062 thick
.063 to .093 thick
for .094 and over
Tighter tolerances for the A, B, & C
dimensions can be provided. See
order example.
ORDER EXAMPLE:
293 - .015 - S - 1
Basic
Part
Number
C Thickness:
See chart or
fill in any length
Material:
See chart
Finish:
See page 277
EXAMPLE FOR NYLON AND DELRIN PARTS: 293-015-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 293-.015-S-1 (A = .370 + .005)
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Recommended
Thickness “C”
.010
.015
.020
.030
.040
.045
.060
.062
.093
.125
.156
.187
.250
.312
.375
.437
.500
Available Material (see page 275)
A
B
C
S
SS
N
D
GM
GS
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Melamine G 5
Glass Silicone G 7
Ph
Phl
L
PA
PP
T
F
GE
UL*
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
Glass Epoxy G10
ULTEM 1000
* ULTEM 1000 - UL Rating 94V-0
Screw
Size
WASHERS
1/4
210
B
ID
.318
.321
.324
.325
.325
.325
.325
.325
.326
.327
.328
.328
.328
.330
.331
.333
.335
.335
.335
.336
.340
.340
.343
.343
.343
.360
.370
.372
.373
.374
.374
A
OD
.751
.764
.520
.383
.500
.562
.625
.870
.412
.750
.562
1.000
1.375
.370
.521
.500
.390
.625
.750
.875
.687
.875
.500
.687
.750
.625
.880
.753
.503
.866
1.005
Basic
Part No.
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
180
185
313
314
315
316
317
318
319
320
321
C
Thickness
Material Finish
Screw
Size
3/8
B
ID
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.377
.378
.378
.378
.378
.380
.380
.380
.381
.382
.382
.382
.384
.384
.385
.385
.387
.390
.390
.390
.391
A
OD
.487
.500
.531
.625
.656
.875
1.000
1.130
1.250
1.632
.562
.482
.563
.720
.750
.683
.812
1.125
.782
.507
.683
2.256
.564
2.750
.625
1.000
.654
.625
.836
.870
1.000
Basic
Part No.
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
C
Thickness
Material
Finish
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
FLAT WASHERS
Tolerances
A = +.020
-.005
B = +.010
C = +.003
+.006
+.009
+.010
up to .032 thick
.033 to .062 thick
.063 to .093 thick
for .094 and over
Tighter tolerances for the A, B, & C
dimensions can be provided. See
order example.
ORDER EXAMPLE:
353 - .015 - S - 1
Basic
Part
Number
C Thickness:
See chart or
fill in any length
Material:
See chart
Finish:
See page 277
EXAMPLE FOR NYLON AND DELRIN PARTS: 353-015-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 353-.015-S-1 (A = .750 + .005)
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Recommended
Thickness “C”
.010
.015
.020
.030
.040
.045
.060
.062
.093
.125
.156
.187
.250
.312
.375
.437
.500
Available Material (see page 275)
A
B
C
S
SS
N
D
GM
GS
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Melamine G 5
Glass Silicone G 7
Ph
Phl
L
PA
PP
T
F
GE
UL*
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
Glass Epoxy G10
ULTEM 1000
* ULTEM 1000 - UL Rating 94V-0
3/8
7/16
B
ID
.394
.395
.398
.401
.402
.405
.406
.409
.407
.410
.415
.416
.421
.423
.425
.435
.437
.437
.437
.437
.437
.437
.439
.440
.440
.440
.441
.441
.442
.442
A
OD
.567
1.844
1.875
.750
1.000
.812
.890
1.000
.800
.568
.750
.628
.781
.556
.720
.630
.750
1.000
1.250
1.500
3.375
3.750
.875
.635
.750
.784
.722
.825
.620
.692
Basic
Part No.
353
354
355
356
194
190
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
C
Thickness
Material Finish
Screw
Size
7/16
1/2
B
ID
.442
.443
.443
.444
.448
.449
.450
.451
.455
.458
.463
.468
.470
.470
.473
.477
.480
.490
.500
.500
.500
.500
.500
.500
.500
.500
.503
.503
.503
.504
A
OD
.812
.875
1.005
.724
.678
.780
.815
.750
1.000
.750
.875
.921
.968
1.000
.927
.625
.750
.812
.687
.750
.875
1.000
1.125
1.250
1.500
1.875
.625
.693
.945
.812
Basic
Part No.
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
197
403
404
405
406
407
408
409
C
Thickness
Material
Finish
WASHERS
Screw
Size
211
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
FLAT WASHERS
Tolerances
A = +.020
-.005
B = +.010
C = +.003
+.006
+.009
+.010
up to .032 thick
.033 to .062 thick
.063 to .093 thick
for .094 and over
Tighter tolerances for the A, B, & C
dimensions can be provided. See
order example.
ORDER EXAMPLE:
410 - .015 - S - 1
Basic
Part
Number
C Thickness:
See chart or
fill in any length
Material:
See chart
Finish:
See page 277
EXAMPLE FOR NYLON AND DELRIN PARTS: 410-015-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 410-.015-S-1 (A = .750 + .005)
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Recommended
Thickness “C”
.010
.015
.020
.030
.040
.045
.060
.062
.093
.125
.156
.187
.250
.312
.375
.437
.500
Available Material (see page 275)
A
B
C
S
SS
N
D
GM
GS
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Melamine G 5
Glass Silicone G 7
Ph
Phl
L
PA
PP
T
F
GE
UL*
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
Glass Epoxy G10
ULTEM 1000
* ULTEM 1000 - UL Rating 94V-0
Screw
Size
WASHERS
1/2
212
B
ID
.505
.505
.505
.505
.505
.505
.506
.510
.510
.510
.513
.515
.515
.515
.515
.515
.516
.518
.520
.520
.526
.528
.530
.531
.531
.535
.535
.535
.536
.538
A
OD
.661
.750
.812
.875
1.000
1.250
.620
.570
.740
.990
.718
.660
.750
.812
.875
2.000
.656
.635
1.063
1.187
1.000
.940
.750
1.000
1.062
.720
1.000
1.281
1.062
1.385
Basic
Part No.
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
195
433
434
435
436
437
438
C
Thickness
Material Finish
Screw
Size
1/2
B
ID
.540
.541
.541
.545
.547
.550
.560
.560
.562
.562
.562
.562
.562
.562
.567
.570
.572
.573
.574
.574
.578
.578
.580
.588
.594
.599
.600
.600
.609
.625
A
OD
.750
.721
.843
.875
.620
.875
.810
1.380
.688
.750
.875
1.000
1.250
1.375
1.380
.886
.755
.985
.748
.984
1.062
2.188
.750
1.125
1.188
1.474
.812
.875
1.474
.750
Basic
Part No.
439
440
441
442
443
444
445
446
447
448
449
450
199
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
C
Thickness
Material
Finish
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
FLAT WASHERS
Tolerances
A = +.020
-.005
B = +.010
C = +.003
+.006
+.009
+.010
up to .032 thick
.033 to .062 thick
.063 to .093 thick
for .094 and over
Tighter tolerances for the A, B, & C
dimensions can be provided. See
order example.
ORDER EXAMPLE:
468 - .015 - S - 1
Basic
Part
Number
C Thickness:
See chart or
fill in any length
Material:
See chart
Finish:
See page 277
EXAMPLE FOR NYLON AND DELRIN PARTS: 468-015-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 468-.015-S-1 (A = .875 + .005)
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Recommended
Thickness “C”
.010
.015
.020
.030
.040
.045
.060
.062
.093
.125
.156
.187
.250
.312
.375
.437
.500
Available Material (see page 275)
A
B
C
S
SS
N
D
GM
GS
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Melamine G 5
Glass Silicone G 7
Ph
Phl
L
PA
PP
T
F
GE
UL*
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
Glass Epoxy G10
ULTEM 1000
* ULTEM 1000 - UL Rating 94V-0
5/8
B
ID
.625
.625
.625
.625
.625
.629
.630
.630
.630
.630
.630
.636
.640
.640
.640
.640
.640
.641
.645
.645
.645
.646
.651
.656
.656
.659
.670
.687
.687
.687
A
OD
.875
1.000
1.239
1.250
1.375
1.493
.812
1.000
1.125
1.187
1.260
.875
.786
1.120
1.188
1.193
2.375
.904
.844
.938
1.062
.746
1.250
1.250
1.312
.882
.970
.875
1.000
1.062
Basic
Part No.
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
200
491
492
493
494
495
496
C
Thickness
Material Finish
Screw
Size
5/8
3/4
B
A
ID
OD
.687 1.250
.687 1.500
.687 1.750
.688 1.500
.688 1.750
.690
.812
.690
.943
.694 1.156
.695 1.346
.707 1.138
.718
.970
.728 1 250
.750 1.000
.750 1.180
.750 1.188
.750 1.250
.750 1.500
.752 1.625
.753 1.006
.754 1.420
.755
.875
.755 1.005
.755 1.500
.760
.990
.765 1.312
.767 1.077
.768
.890
.781 1.244
.784
.872
.812 1.000
Basic
Part No.
497
498
499
9600
9601
9602
9603
9604
9605
9607
9608
9609
9610
9611
9612
9613
9614
9615
9616
9617
9618
9619
9620
9621
9622
9623
9624
9625
9626
9627
C
Thickness
Material
Finish
WASHERS
Screw
Size
213
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
FLAT WASHERS
Tolerances
A = +.020
-.005
B = +.010
C = +.003
+.006
+.009
+.010
up to .032 thick
.033 to .062 thick
.063 to .093 thick
for .094 and over
Tighter tolerances for the A, B, & C
dimensions can be provided. See
order example.
ORDER EXAMPLE:
9628 -.015 S1
Basic
Part
Number
C Thickness:
See chart or
fill in any length
Material:
See chart
Finish:
See page 277
EXAMPLE FOR NYLON AND DELRIN PARTS: 9628-015-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 9628-.015-S-1 (A = 1.420 + .005)
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Recommended
Thickness “C”
.010
.015
.020
.030
.040
.045
.060
.062
.093
.125
.156
.187
.250
.312
.375
.437
.500
Available Material (see page 275)
A
B
C
S
SS
N
D
GM
GS
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Melamine G 5
Glass Silicone G 7
Ph
Phl
L
PA
PP
T
F
GE
UL*
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
Glass Epoxy G10
ULTEM 1000
* ULTEM 1000 - UL Rating 94V-0
Screw
Size
WASHERS
3/4
7/8
214
B
ID
.812
.812
.812
.812
.812
.812
.812
.815
.817
.817
.817
.820
.839
.839
.840
.843
.845
.853
.875
.875
.875
.878
.879
.879
.879
.880
.890
.893
.895
.901
A
OD
1.250
1.375
1.469
1.500
1.750
1.875
2.000
1.068
1.000
1.474
2.005
.961
1.384
1.438
1.437
1.190
1.125
1.420
1.125
1.250
1.500
1.132
1.246
1.640
2.000
1.130
1.500
1.136
1.218
1.750
Basic
Part No.
9628
205
9629
9630
9631
9632
9633
9634
9635
9636
9637
9638
9639
9640
9641
9642
9643
9644
9645
9646
9647
9648
9649
9650
9651
9652
9653
9654
9746
9655
C
Thickness
Material Finish
Screw
Size
7/8
1.00
B
ID
.937
.937
.937
.937
.940
.947
1.000
1.000
1.000
1.000
1.000
1.004
1.004
1.004
1.010
1.015
1.020
1.026
1.031
1.062
1.062
1.067
1.067
1.069
1.073
1.073
1.073
1.078
1.078
1.081
A
OD
1.250
1.500
1.750
2.250
1.187
1.312
1.250
1.375
1.500
1.750
2.000
1.562
1.875
2.250
1.250
1.750
1.330
2.000
1.500
2.000
2.500
2.005
2.505
1.250
1.312
1.365
1.500
1.812
1.880
1.639
Basic
Part No.
9656
9657
9658
9659
9660
9661
9662
9663
9664
9665
9666
9667
9668
9669
9670
9671
9672
9673
9674
9675
9676
9677
9678
9679
9680
9681
9682
9683
9684
9685
C
Thickness
Material
Finish
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
FLAT WASHERS
Tolerances
A = +.020
-.005
B = +.010
C = +.003
+.006
+.009
+.010
up to .032 thick
.033 to .062 thick
.063 to .093 thick
for .094 and over
Tighter tolerances for the A, B, & C
dimensions can be provided. See
order example.
ORDER EXAMPLE:
9690 -.015 S1
Basic
Part
Number
C Thickness:
See chart or
fill in any length
Material:
See chart
Finish:
See page 277
EXAMPLE FOR NYLON AND DELRIN PARTS: 9690-015-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 9690-.015-S-1 (A = 1.260 + .005)
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Recommended
Thickness “C”
.010
.015
.020
.030
.040
.045
.060
.062
.093
.125
.156
.187
.250
.312
.375
.437
.500
Available Material (see page 275)
A
B
C
S
SS
N
D
GM
GS
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Melamine G 5
Glass Silicone G 7
Ph
Phl
L
PA
PP
T
F
GE
UL*
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
Glass Epoxy G10
ULTEM 1000
* ULTEM 1000 - UL Rating 94V-0
1.00
1.25
B
ID
1.129
1.129
1.135
1.137
1.165
1.187
1.187
1.188
1.195
1.198
1.250
1.252
1.254
1.258
1.260
1.260
1.265
1.279
1.281
1.312
1.312
1.323
1.323
1.324
1.328
1.328
1.347
1.379
A
OD
2.095
2.500
1.370
1.625
1.562
2.500
2.750
1.732
1.436
1.750
2.750
2.000
2.350
1.507
1.812
1.875
2.005
1.611
1.750
2.750
3.000
1.615
1.875
1.575
2.062
2.067
1.888
2.585
Basic
Part No.
9690
9691
9692
9693
9694
9695
9696
9697
9698
9699
9700
9701
9702
9703
9704
9705
9706
9707
9708
9709
9710
9711
9712
9713
9714
9715
9716
9717
C
Thickness
Material Finish
Screw
Size
1.25
1.50
2.00
B
ID
1.421
1.437
1.443
1.504
1.505
1.506
1.510
1.525
1.562
1.562
1.572
1.635
1.635
1.640
1.699
1.790
1.827
1.863
1.885
1.890
1.890
1.947
1.950
2.073
2.198
2.265
2.515
A
OD
1.812
3.250
2.000
2.820
2.000
1.998
2.062
2.150
3.250
3.500
2.125
1.865
2.188
2.375
2.250
2.440
2.375
2.645
2.115
2.375
2.625
2.500
3.000
2.625
2.750
3.000
3.250
Basic
Part No.
9718
9719
9720
9721
9722
9723
9724
9725
9726
9727
9728
9729
9730
9731
9732
9733
9734
9735
9736
9737
9738
9739
9740
9741
3742
9743
9744
C
Thickness
Material
Finish
WASHERS
Screw
Size
215
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
NEOPRENE FLAT WASHERS
Durameter - Medium #60
ORDER EXAMPLE:
9800 - .016
Basic
Part Number
WASHERS
216
Thickness
Thicknesses
and Tolerances
Available
.015 - .031
.047
.062
.093
.125
+.005
+.006
+.008
+.012
+.015
Basic
Part Number
Screw Size
Inside Dia
+.010
Outside Dia
+.010
9800
9801
9802
9808
9810
9811
9812
9816
9820
9822
9823
9824
9828
9830
9832
9836
9838
9840
9842
9844
9849
9850
9851
9854
9856
9862
9863
9864
9866
0
0
0
1
1
1
2
2
3
3
3
3
4
4
4
6
6
6
6
6
6
6
6
8
8
8
8
10
10
.070
.070
.070
.086
.086
.086
.093
.093
.109
.109
.108
.109
.120
.120
.125
.150
.150
.150
.150
.156
.156
.156
.156
.171
.171
.187
.187
.203
.203
.199
.312
.242
.242
.329
.375
.235
.390
.235
.283
.500
.390
.380
.529
.250
.380
.400
.478
.644
.375
.750
2.000
1.00
.380
.430
.312
.500
.443
.465
!
TECH
TIP
Tolerances on
fractions are larger
than the tolerances
on decimals.
NOTES: Tensile Strength, PSI 1500
Hardness, 50-70 SDH
Resistance to Continuous Heat, °F 175
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
NEOPRENE FLAT WASHERS
Durameter - Medium #60
Basic
Part Number
Basic
Part Number
9871
9872
9877
9878
9882
9884
9886
9887
9892
9893
9894
9898
98100
98102
98103
98104
98106
98110
98112
98113
98117
98118
98120
98124
98128
98130
98133
NOTES: Tensile Strength, PSI 1500
Hardness, 50-70 SDH
Resistance to Continuous Heat, °F 175
Thickness
Thicknesses
and Tolerances
Available
.015 - .031
.047
.062
.093
.125
+.005
+.006
+.008
+.012
+.015
Screw Size
Inside Dia
+.010
Outside Dia
+.010
10
.203
.265
.265
.265
.328
.328
.328
.328
.390
.390
.390
.453
.453
.515
.453
.515
.515
.640
.640
.640
.687
.765
.765
.890
1.015
1.015
1.015
1.000
.505
.625
.745
.567
.687
.812
1.000
.745
.781
.865
.755
.880
.750
1.00
.880
1.000
.875
1.000
1.250
1.000
1.000
1.187
1.250
1.250
1.500
2.00
WASHERS
ORDER EXAMPLE:
9871 - .016
217
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
SHOULDER WASHERS
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Epoxy
G10
Screw
Size
00
0
WASHERS
1
2
3
218
Ph
Phl
L
PA
PP
T
F
UL
Code
Color
Natural
Black
Red
Blue
Purple
1
2
3
4
5
Brown
Orange
Green
Yellow
Code
6
7
8
9
ORDER EXAMPLE:
15000 - .060 - .030 - S - 1
Available Material (see page 275)
A
B
C
S
SS
N
D
GE
Color
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
F ber
ULTEM 1000 UL Rating 94V-O
Shoulder Length E:
Fill in length
Basic
Part
Number
Shank Length D:
Fill in length
Material:
See chart
Finish:
See page
277
EXAMPLE FOR NYLON AND DELRIN PARTS: 15000-.060-.030-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 15000-.060-.030-S-1 (A = .078)
Internal threaded Shoulder Washers are available. Add desired thread to part number (see pa ge 281).
EXAMPLE: 15010-.050-.050-B-1 (A = 2-56)
A
B
C
± .005
± .010
± .010
Basic
Part Number
.046
.051
.053
.055
.062
.062
.063
.070
.078
.083
.090
.090
.090
.092
.093
.093
.093
.093
.093
.093
.093
.094
.095
.096
.097
.098
.098
.098
.098
.099
.100
.100
.103
.103
.106
.106
.107
.140
.090
.125
.125
.090
.156
.125
.105
.150
.123
.122
.131
.187
.151
.115
.122
.125
.125
.140
.152
.154
.137
.155
.180
.125
.136
.140
.170
.190
.128
.187
.187
.160
.192
.165
.170
.152
.187
.127
.250
.344
.156
.250
.187
.140
.215
.240
.187
.187
.313
.219
.140
.250
.187
.234
.250
.312
.250
.250
.265
.312
.187
.312
.250
.218
.250
.312
.250
.375
.250
.316
.312
.250
.224
15000
15002
15004
15006
15008
15010
15012
15014
15016
15018
15020
15022
15024
15026
15028
15030
15032
15034
15036
15038
15040
15042
15044
15046
15048
15050
15052
15054
15056
15058
16060
15062
15064
15066
15068
15070
15072
E
Shoulder Length
± .005
D
Shank Length
± .005
Material
Finish
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
SHOULDER WASHERS
Screw
Size
3
4
Ph
Phl
L
PA
PP
T
F
UL
Color
Natural
Black
Red
Blue
Purple
1
2
3
4
5
Brown
Orange
Green
Yellow
Code
6
7
8
9
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
F ber
ULTEM 1000 UL Rating 94V-O
Shoulder Length E:
Fill in length
Basic
Part
Number
Shank Length D:
Fill in length
Material:
See chart
Finish:
See page
277
EXAMPLE FOR NYLON AND DELRIN PARTS: 15074-.060-.030-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 15074-.060-.030-S-1 (A = .125)
Internal threaded Shoulder Washers are available. Add desired thread to part number (see pa ge 281).
EXAMPLE: 15074-.060-.060-S-1 (A = 2-56)
A
B
C
± .005
± .010
± .010
Basic
Part Number
.110
.110
.111
.112
.112
.113
.113
.114
.115
.115
.115
.115
.115
.116
.116
.116
.118
.118
.118
.120
.120
.120
.120
.120
.120
.120
.120
.121
.123
.125
.125
.125
.125
.125
.125
.125
.125
.187
.203
.244
.150
.185
.146
.187
.150
.136
.147
.175
.187
.187
.150
.158
.187
.137
.150
.177
.150
.180
.185
.190
.190
.214
.216
.248
.245
.187
.156
.171
.175
.187
.187
.190
.190
.199
.250
.312
.375
.250
.312
.250
.245
.312
.200
.235
.281
.250
.343
.250
.316
.281
.250
.250
.281
.250
.312
.250
.312
.375
.312
.375
.625
.375
.312
.250
.437
.312
.313
.375
.312
.375
.243
15074
15076
15078
15080
15082
15084
15086
15088
15090
15092
15094
15096
15098
15100
15102
15104
15105
15106
15108
15110
15112
15114
15116
15118
15120
15122
15124
15126
15128
15130
15132
15134
15136
15138
15140
15142
15144
E
Shoulder Length
± .005
D
Shank Length
± .005
Material
Finish
WASHERS
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Epoxy
G10
Code
ORDER EXAMPLE:
15074 - .060 - .030 - S - 1
Available Material (see page 275)
A
B
C
S
SS
N
D
GE
Color
219
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
SHOULDER WASHERS
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Epoxy
G10
Screw
Size
4
WASHERS
5
220
Ph
Phl
L
PA
PP
T
F
UL
Code
Color
Natural
Black
Red
Blue
Purple
1
2
3
4
5
Brown
Orange
Green
Yellow
Code
6
7
8
9
ORDER EXAMPLE:
15146 - .060 - .030 - S - 1
Available Material (see page 275)
A
B
C
S
SS
N
D
GE
Color
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
F ber
ULTEM 1000 UL Rating 94V-O
Shoulder Length E:
Fill in length
Basic
Part
Number
Shank Length D:
Fill in length
Material:
See chart
Finish:
See page
277
EXAMPLE FOR NYLON AND DELRIN PARTS: 15146-.060-.030-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 15146-.060-.030-S-1 (A = .136)
Internal threaded Shoulder Washers are available. Add desired thread to part number (see pa ge 281).
EXAMPLE: 15146-.060-.060-B-1 (A = 2-56)
A
B
C
± .005
± .010
± .010
Basic
Part Number
.125
.125
.125
.125
.125
.125
.125
.126
.127
.128
.128
.128
.128
.128
.128
.128
.128
.128
.129
.129
.129
.130
.130
.130
.130
.130
.130
.133
.133
.133
.135
.135
.136
.136
.136
.136
.136
.203
.218
.218
.241
.250
.312
.312
.197
.155
.150
.185
.185
.187
.193
.203
.218
.250
.265
.185
.185
.212
.177
.185
.187
.192
.208
.250
.219
.240
.187
.187
.187
.185
.187
.187
.221
.245
.421
.312
.343
.312
.375
.375
.625
.312
.265
.234
.312
.375
.312
.281
.375
.312
.375
.320
.345
.378
.437
.281
.335
.343
.437
.312
.375
.343
.355
.312
.328
.437
.312
.250
.312
.312
.375
15146
15148
15150
15152
15154
15156
15158
15160
15162
15164
15166
15168
15170
15172
15174
15176
15178
15180
15182
15184
15186
15188
15190
15192
15194
15196
15198
15200
15202
15204
15206
15208
15210
15212
15214
15216
15218
E
Shoulder Length
± .005
D
Shank Length
± .005
Material
Finish
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
SHOULDER WASHERS
Screw
Size
5
6
Ph
Phl
L
PA
PP
T
F
UL
Color
Natural
Black
Red
Blue
Purple
1
2
3
4
5
Brown
Orange
Green
Yellow
Code
6
7
8
9
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
F ber
ULTEM 1000 UL Rating 94V-O
Shoulder Length E:
Fill in length
Basic
Part
Number
Shank Length D:
Fill in length
Material:
See chart
Finish:
See page
277
EXAMPLE FOR NYLON AND DELRIN PARTS: 15220-.060-.030-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 15220-.060-.030-S-1 (A = .150)
Internal threaded Shoulder Washers are available. Add desired thread to part number (see pa ge 281).
EXAMPLE: 15220-.060-.060-SS-1 (A = 4-40)
A
B
C
± .005
± .010
± .010
Basic
Part Number
.136
.138
.139
.140
.140
.140
.140
.140
.140
.140
.140
.140
.140
.140
.140
.141
.141
.141
.141
.144
.144
.144
.144
.144
.146
.147
.147
.147
.147
.150
.150
.152
.155
.156
.156
.156
.156
.437
.190
.183
.170
.185
.185
.187
.187
.187
.210
.210
.212
.224
.234
.237
.182
.187
.187
.250
.187
.213
.250
.281
.312
.248
.172
.187
.255
.360
.203
.250
.199
.245
.250
.250
.250
.312
.562
.281
.312
.290
.312
.378
.234
.312
.328
.312
.375
.437
.343
.500
.375
.320
.250
.312
.375
.313
.310
.437
.437
.437
.375
.312
.375
.375
.500
.247
.355
.378
.360
.375
.437
.500
.500
15220
15222
15224
15226
15228
15230
15232
15234
15236
15238
15240
15242
15244
15246
15248
15250
15252
15254
15256
15258
15260
15262
15264
15266
15268
15270
15272
15274
15276
15278
15280
15282
15284
15286
15288
15290
15292
E
Shoulder Length
± .005
D
Shank Length
± .005
Material
Finish
WASHERS
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Epoxy
G10
Code
ORDER EXAMPLE:
15220 - .060 - .030 - S - 1
Available Material (see page 275)
A
B
C
S
SS
N
D
GE
Color
221
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
SHOULDER WASHERS
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Epoxy
G10
Screw
Size
6
WASHERS
8
222
Ph
Phl
L
PA
PP
T
F
UL
Code
Color
Natural
Black
Red
Blue
Purple
1
2
3
4
5
Brown
Orange
Green
Yellow
Code
6
7
8
9
ORDER EXAMPLE:
15294 - .060 - .030 - S - 1
Available Material (see page 275)
A
B
C
S
SS
N
D
GE
Color
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
F ber
ULTEM 1000 UL Rating 94V-O
Shoulder Length E:
Fill in length
Basic
Part
Number
Shank Length D:
Fill in length
Material:
See chart
Finish:
See page
277
EXAMPLE FOR NYLON AND DELRIN PARTS: 15294-.060-.030-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 15294-.060-.030-S-1 (A = .175)
Internal threaded Shoulder Washers are available. Add desired thread to part number (see pa ge 281).
EXAMPLE: 15294-.060-.040-SS-1 (A = 4-40)
A
B
C
± .005
± .010
± .010
Basic
Part Number
.160
.160
.161
.162
.162
.163
.163
.163
.165
.165
.166
.168
.168
.169
.169
.169
.169
.169
.169
.169
.170
.170
.170
.170
.170
.170
.171
.171
.173
.173
.173
.174
.174
.175
.176
.178
.185
.220
.250
.275
.218
.250
.213
.229
.430
.281
.312
.268
.250
.250
.215
.218
.236
.245
.245
.250
.278
.205
.234
.245
.250
.263
.312
.250
.250
.300
.370
.437
.218
.250
.260
.213
.312
.255
.343
.375
.433
.359
.625
.437
.312
.625
.625
.437
.500
.375
.437
.375
.312
.384
.437
.440
.380
.562
.344
.375
.390
.312
.437
.562
.375
.500
.468
.500
.562
.375
.375
.437
.437
.500
.365
15294
15296
15298
15300
15302
15304
15306
15308
15310
15312
15314
15316
15318
15320
15322
15324
15326
15328
15330
15332
15334
15336
15338
15340
15342
15344
15346
15348
15350
15352
15354
15356
15358
15360
15362
15364
15366
E
Shoulder Length
± .005
D
Shank Length
± .005
Material
Finish
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
SHOULDER WASHERS
Screw
Size
8
10
Ph
Phl
L
PA
PP
T
F
UL
Color
Natural
Black
Red
Blue
Purple
1
2
3
4
5
Brown
Orange
Green
Yellow
Code
6
7
8
9
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
F ber
ULTEM 1000 UL Rating 94V-O
A
B
C
± .005
± .010
± .010
.187
.187
.187
.187
.187
.187
.187
.187
.188
.190
.190
.191
.192
.193
.193
.193
.193
.194
.194
.194
.194
.195
.195
.195
.196
.196
.196
.196
.196
.196
.196
.198
.199
.199
.199
.200
.200
.250
.250
.250
.265
.281
.281
.312
.372
.280
.265
.312
.275
.309
.246
.257
.312
.368
.233
.277
.308
.495
.240
.310
.310
.250
.250
.300
.300
.308
.312
.375
.247
.248
.300
.341
.240
.245
.312
.375
.500
.375
.437
1.500
.562
.437
.500
.500
.500
.406
.625
.500
.375
.440
.500
.281
.531
.375
.750
.375
.437
.625
.312
.380
.500
.581
.375
.625
.625
.750
.500
.468
.750
.500
.530
Shoulder Length E:
Fill in length
Basic
Part
Number
Shank Length D:
Fill in length
Material:
See chart
Finish:
See page
277
EXAMPLE FOR NYLON AND DELRIN PARTS: 15368-.060-.030-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 15368-.060-.030-S-1 (A = .199)
Internal threaded Shoulder Washers are available. Add desired thread to part number (see pa ge 281).
EXAMPLE: 15368-.040-.040-B-1 (A = 4-40)
Basic
Part Number
15368
15370
15372
15374
15376
15378
15380
15382
15384
15386
15388
15390
15392
15394
15396
15398
15400
15402
15404
15406
15408
15410
15412
15414
15416
15418
15420
15422
15424
15426
15428
15430
15432
15434
15436
15438
15440
E
Shoulder Length
± .005
D
Shank Length
± .005
Material
Finish
WASHERS
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Epoxy
G10
Code
ORDER EXAMPLE:
15368 - .060 - .030 - S - 1
Available Material (see page 275)
A
B
C
S
SS
N
D
GE
Color
223
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
SHOULDER WASHERS
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Epoxy
G10
Screw
Size
WASHERS
10
12
1/4
224
Ph
Phl
L
PA
PP
T
F
UL
Code
Color
Natural
Black
Red
Blue
Purple
1
2
3
4
5
Brown
Orange
Green
Yellow
Code
6
7
8
9
ORDER EXAMPLE:
15442 - .060 - .030 - S - 1
Available Material (see page 275)
A
B
C
S
SS
N
D
GE
Color
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
F ber
ULTEM 1000 UL Rating 94V-O
A
B
C
± .005
± .010
± .010
.200
.200
.200
.200
.200
.200
.200
.200
.201
.201
.201
.203
.203
.203
.203
.203
.204
.205
.205
.206
.208
.210
.210
.212
.215
.218
.218
.218
.220
.223
.234
.235
.250
.250
.250
.250
.250
.245
.250
.252
.260
.280
.303
.304
.430
.358
.358
.358
.250
.296
.312
.312
.313
.270
.324
.500
.358
.275
.245
.281
.272
.380
.310
.375
.375
.281
.312
.365
.335
.312
.312
.343
.343
.375
.531
.437
.375
.399
.437
.390
.375
.625
.750
1.000
1.375
.500
.468
.437
.750
.390
.500
.590
1.375
1.000
.380
.437
.437
.343
.635
.500
.500
.625
.375
.500
.500
.500
.375
.750
.437
.625
.500
Shoulder Length E:
Fill in length
Basic
Part
Number
Shank Length D:
Fill in length
Material:
See chart
Finish:
See page
277
EXAMPLE FOR NYLON AND DELRIN PARTS: 15442-.060-.030-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 15442-.060-.030-S-1 (A = .215)
Internal threaded Shoulder Washers are available. Add desired thread to part number (see pa ge 281).
EXAMPLE: 15442-.060-.060-S-1 (A = 4-40)
Basic
Part Number
15442
15444
15446
15448
15450
15452
15454
15456
15458
15460
15462
15464
15466
15468
15470
15472
15474
15476
15478
15480
15482
15484
15486
15488
15490
15492
15494
15496
15498
15500
15502
15504
15506
15008
15510
15512
15514
E
Shoulder Length
± .005
D
Shank Length
± .005
Material
Finish
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
SHOULDER WASHERS
Screw
Size
1/4
Ph
Phl
L
PA
PP
T
F
UL
Color
Natural
Black
Red
Blue
Purple
1
2
3
4
5
Brown
Orange
Green
Yellow
Code
6
7
8
9
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
F ber
ULTEM 1000 UL Rating 94V-O
A
B
C
± .005
± .010
± .010
.250
.252
.253
.253
.253
.255
.255
.257
.257
.257
.258
.260
.260
.260
.260
.260
.260
.260
.265
.265
.265
.265
.265
.268
.280
.281
.281
.281
.281
.281
.286
.290
.296
.305
.312
.312
.312
.437
.372
.307
.308
.312
.275
.341
.310
.312
.323
.344
.310
.312
.338
.365
.375
.375
.503
.345
.359
.365
.370
.484
.430
.343
.312
.375
.421
.500
.562
.349
.387
.339
.437
.432
.437
.500
.625
.500
.438
.500
.437
.437
.500
.750
.560
.420
.500
.437
.500
.515
.500
.500
.625
.750
.500
.625
.500
.750
.875
.625
.437
.625
.750
.500
.750
1.000
.531
.562
.531
.750
.562
.500
.625
Shoulder Length E:
Fill in length
Basic
Part
Number
Shank Length D:
Fill in length
Material:
See chart
Finish:
See page
277
EXAMPLE FOR NYLON AND DELRIN PARTS: 15516-.060-.030-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 15516-.060-.030-S-1 (A = .305)
Internal threaded Shoulder Washers are available. Add desired thread to part number (see pa ge 281).
EXAMPLE: 15516-.060-.030-S-1 (A = 4-40)
Basic
Part Number
15516
15518
15520
15522
15524
15526
15528
15530
15532
15534
15536
15538
15540
15542
15544
15545
15546
15548
15550
15552
15554
15556
15558
15560
15562
15564
15566
15568
15570
15572
15574
15576
15578
15580
15582
15584
15586
E
Shoulder Length
± .005
D
Shank Length
± .005
Material
Finish
WASHERS
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Epoxy
G10
Code
ORDER EXAMPLE:
15516 - .060 - .030 - S - 1
Available Material (see page 275)
A
B
C
S
SS
N
D
GE
Color
225
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
SHOULDER WASHERS
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Glass Epoxy
G10
Screw
Size
WASHERS
5/16
3/8
7/16
1/2
226
Ph
Phl
L
PA
PP
T
F
UL
Code
Color
Natural
Black
Red
Blue
Purple
1
2
3
4
5
Brown
Orange
Green
Yellow
Code
6
7
8
9
ORDER EXAMPLE:
15590 - .060 - .030 - S - 1
Available Material (see page 275)
A
B
C
S
SS
N
D
GE
Color
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
F ber
ULTEM 1000 UL Rating 94V-O
A
B
C
± .005
± .010
± .010
.321
.323
323
.327
.330
.343
.343
.345
.375
.375
.375
.375
.375
.377
.380
.380
.380
.380
.385
.385
.386
.386
.400
.406
.406
.437
.437
.437
.438
.452
.463
.477
.500
.500
.505
.508
.513
.437
.375
.437
.355
.520
.437
.562
.470
.500
.500
.500
.500
.625
.435
.430
.442
.500
.558
.500
.562
.443
.484
.503
.500
.574
.496
.562
.593
.600
.562
.506
.559
.562
.750
.569
.558
.572
.750
.750
.562
.750
.750
.625
1.000
.625
.625
.687
.750
1.000
1.000
.614
.625
.625
.625
.812
.625
.687
.562
.687
.750
.625
.625
.625
.750
.875
.750
.688
.625
.650
.750
.1.000
.875
.890
.796
Shoulder Length E:
Fill in length
Basic
Part
Number
Shank Length D:
Fill in length
Material:
See chart
Finish:
See page
277
EXAMPLE FOR NYLON AND DELRIN PARTS: 15590-.060-.030-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If a different tolerance and/or dimension change is required, add to part number.
EXAMPLE: 15590-.060-.030-S-1 (A = .125)
Internal threaded Shoulder Washers are available. Add desired thread to part number (see pa ge 281).
EXAMPLE: 15590-.060-.030-N-1 (A = 4-40)
Basic
Part Number
15590
15592
15594
15596
15598
15600
15602
15604
15606
15608
15610
15612
15614
15616
15618
15620
15622
15624
15626
15628
15630
15632
15634
15636
15638
15640
15642
15644
15646
15648
15650
15652
15654
15656
15658
15660
15662
E
Shoulder Length
± .005
D
Shank Length
± .005
Material
Finish
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
BELLEVILLE WASHERS - SPRING STEEL
Basic
Part
Number
24000
24001
24002
24005
24007
24008
24009
24012
24011
24013
24015
24017
24019
24021
24023
24025
24027
24029
24031
24033
24035
24037
24039
24041
24043
24045
24047
24049
24051
24053
24050
24055
24057
24059
24061
24063
24065
24067
24069
24071
24073
24075
Screw
Size
#0
#1
#2
#3
#4
#5
B
A
D
C
Calc. Load
at Flat
Position
(Lbs)
.056
.066
.066
.066
.078
.078
.078
.078
.087
.094
.094
.094
.094
.094
.097
.100
.103
.103
.106
.111
.111
.115
.118
.118
.119
.120
.125
.125
.125
.128
.128
.128
.128
.128
.128
.128
.130
.130
.130
.133
.133
.133
.125
.156
.218
.312
.150
.187
.218
.250
.196
.187
.250
.312
.343
.375
.203
.200
.200
.312
.240
.300
.375
.250
.375
.400
.200
.365
.250
.250
.312
.250
.312
.318
.318
.437
.550
.625
.243
.315
.365
.300
.300
.312
.010
.025
.032
.018
.028
.020
.045
.046
.025
.025
.040
.060
.020
.050
.030
.040
.031
.055
.050
.055
.045
.025
.050
.035
.030
.060
.020
.045
.050
.020
.065
.060
.060
.050
.060
.060
.020
.015
.040
.045
.045
.060
.005
.010
.010
.008
.008
.010
.010
.015
.010
.010
.010
.015
.005
.010
.010
.020
.006
.030
.008
.012
.010
.005
.030
.020
.005
.045
.010
.020
.030
.008
.032
.010
.015
.030
.015
.015
.012
.003
.020
.012
.015
.016
7.2
109.2
78.0
9.0
88.6
50.4
282.5
70.3
81.8
82.7
263.0
2.6
48.0
90.1
760.8
26.1
1174.8
67.1
141.8
41.9
7.3
648.4
126.3
16.9
1737.7
30.4
608.6
968.9
18.9
86.4
262.6
476.4
85.2
66.8
46.4
0.5
205.1
114.0
202.5
329.0
Dimensions
cause internal strains and washer failure. The true Belleville washer is
an approximately linear rate spring of conical form designed to deflect
from its initial height to the flat position without a loss in height caused
by a permanent set due to stresses exceeding the elastic limit of the
washer material.
Approx.
Load
(Lbs)
Approx.
Deflection
(Ins)
2.4
19.5
5.2
9.3
46.1
14.2
16.5
26.3
56.7
5.3
38.0
21.2
18.1
77.6
44.0
44.2
29.2
10.7
89.4
35.3
16.6
127.4
10.4
60.1
68.3
11.7
43.6
56.6
65.7
51.8
52.5
15.0
2.0
38.0
23.4
32.4
62.1
.001
<.001
.001
.003
<.001
.001
<.001
.001
.001
.001
.001
.001
.005
.002
.001
<.001
.001
.001
.001
.001
.002
.002
.002
.003
.001
.001
.002
.001
.001
.003
.001
.001
.002
.002
.004
.002
.008
.002
.001
.001
.001
Tolerances
A = +.010
B = Up to/including
No. 10: +.005
Over No. 10: +.010
C = Commercial
D = +.005
-.015
ORDER EXAMPLE:
24000 - 31A
Basic
Part Number
Thickness
Available in Stainless Steel* Type 301-304.
Add SS to part number. EXAMPLE: 24000-SS-12
301-304 Passivate
Stainless Steel Finish
WASHERS
Conical discs are widely used as compression springs to support large
loads where space in the direction of loading is limited. Many conical
spring washers are designed with a height which will result in a partial
recovery after an initial deflection. Excessive cone heights do not add
materially to the spring action, since there is a specific amount of
springback available. However, a permanent set can result which may
*Load and deflection data does not apply
to Stainless Steel.
227
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
BELLEVILLE WASHERS - SPRING STEEL
Basic
Part
Number
WASHERS
228
24077
24079
24081
24083
24085
24087
24089
24091
24093
24095
24097
24099
24101
24103
24105
24107
24109
24111
24113
24115
24117
24119
24121
24123
24125
24127
24129
24131
24133
24135
24137
24139
24141
24143
24145
24149
24151
24153
24155
24157
24159
24161
Screw
Size
#6
#8
#10
#12
B
A
D
C
Calc. Load
at Flat
Position
(LBS)
.144
.144
.144
.148
.148
.153
.153
.153
.153
.153
.153
.156
.160
.168
.173
.175
.175
.182
.183
.185
.185
.185
.185
.187
.187
.187
.195
.195
.196
.201
.204
.204
.204
.204
.205
.207
.207
.207
.208
.219
.223
.223
.281
.300
.425
.375
.500
.312
.375
.375
.438
.500
.562
.625
.307
.437
.365
.500
.562
.380
.400
.306
.375
.500
.625
.437
.437
.437
.370
.562
.480
.500
.437
.509
.509
.561
.586
.375
.562
.625
.396
.406
.435
.435
.030
.050
.050
.055
.070
.040
.060
.060
.050
.040
.060
.040
.025
.055
.035
.070
.065
.079
.011
.016
.055
.060
.075
.020
.060
.060
.027
.045
.050
.075
.060
.060
.060
.050
.031
.020
.060
.050
.030
.032
.035
.065
.010
.012
.020
.040
.040
.025
.010
.015
.030
.020
.030
.015
.015
.040
.015
.030
.040
.020
.005
.006
.040
.032
.040
.010
.010
.015
.015
.030
.030
.030
.010
.010
.015
.025
.015
.005
.040
.030
.020
.020
.020
.050
48.8
135.8
225.6
1188.2
1294.1
453.1
62.3
189.5
479.6
107.9
432.1
36.5
69.8
870.0
93.7
736.3
855.0
608.0
0.8
5.0
1288.9
630.6
966.2
9.3
46.5
141.5
58.1
218.3
411.3
849.6
48.1
33.7
102.4
212.6
26.8
2.7
695.9
234.2
99.9
116.2
122.3
1912.2
Dimensions
Approx.
Load
(LBS)
Approx.
Deflection
(INS)
21.6
38.0
65.9
176.4
130.0
78.0
61.1
79.2
97.0
44.6
104.2
27.8
26.5
129.2
33.7
142.6
135.7
97.7
0.8
5.4
191.4
111.2
181.0
9.3
66.5
59.1
26.2
97.8
108.6
171.6
68.7
62.2
80.4
73.1
22.7
5.9
164.2
88.8
44.7
46.5
53.5
273.5
.002
.001
.003
.002
.002
.002
.002
.002
.003
.005
.004
.001
.003
.002
.003
.003
.003
.001
.006
.006
.002
.003
.004
.010
.003
.002
.004
.006
.004
.003
.003
.004
.004
.005
.011
.007
.004
.006
.004
.004
.005
.002
Tolerances
A = +.010
B = Up to/including
No. 10: +.005
Over No. 10: +.010
C = Commercial
D = +.005
- .015
ORDER EXAMPLE:
24077 - 31A
Basic
Part Number
Thickness
Available in Stainless Steel* Type 301-304.
Add SS to part number. EXAMPLE: 24077-SS-12
301-304 Passivate
Stainless Steel Finish
*Load and deflection data does not apply
to Stainless Steel.
!
TECH
TIP
Belleville spring
washers can
solve spring
problems of high
loads in a limited
space with small
deflections.
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
BELLEVILLE WASHERS - SPRING STEEL
24163
24165
24167
24169
24171
24173
24175
24177
24179
24181
24183
24185
24187
24189
24191
24193
24195
24197
24199
24201
24203
24205
24207
24209
24211
24213
24215
24217
24219
24221
24223
24225
24227
24229
24231
24233
24235
24236
24237
24239
24241
Screw
Size
#12
1/4
5/16
D
C
Calc. Load
at Flat
Position
(LBS)
.080
.050
.050
.100
.090
.040
.032
.110
.031
.080
.080
.034
.040
.040
.060
.090
.012
.027
.038
.064
.080
.076
.125
.054
.020
.048
.025
.045
.061
.103
.050
.030
.085
.062
.080
.080
.150
.112
.083
.035
.125
.060
.030
.030
.050
.030
.025
.008
.062
.006
.015
.025
.018
.020
.025
.020
.040
.008
.020
.018
.045
.032
.050
.060
.032
.010
.032
.010
.025
.031
.086
.010
.020
.010
.016
.015
.025
.090
.060
.062
.016
.062
3331.1
297.9
194.7
2254.3
1787.5
180.3
5.8
2546.3
7.5
78.2
306.4
72.6
92.7
189.9
96.4
999.1
.9
85.2
59.1
386.0
320.4
1716.2
12133.2
276.1
9.9
265.3
14.3
299.0
186.0
3434.2
9.0
44.5
38.2
73.8
113.8
445.0
4717.6
2898.3
674.6
34.7
2071.3
Dimensions
B
A
.223 .485
.223 .562
.223 .685
.223 .685
.252 .437
.255 .500
.255 .610
.255 .870
.256 .406
.256 .694
.256 .694
.260 .500
.260 .562
.261 .493
.264 .752
.265 .740
.266 .626
.271 .406
.275 .600
.281 .871
.281 .910
.283 .593
.296 .500
.316 .690
.319 .492
.322 .620
.323 .500
.323 .500
.323 .906
.325 .750
.325 .870
.326 .600
.326 .620
.328 .688
.334 .620
.334 .620
.340 1.250
.343 .875
.348 1.119
.353 .665
.379 1.110
Approx.
Load
(LBS)
Approx.
Deflection
(INS)
396.3
96.2
94.5
285.5
146.0
72.1
12.6
400.2
17.5
106.3
144.8
42.8
49.8
75.9
74.8
233.3
.9
62.2
40.5
195.9
145.2
319.8
400.7
125.1
9.9
128.8
14.3
87.3
107.8
829.3
31.5
44.5
107.8
84.0
126.6
172.6
753.8
445.8
399.0
30.7
485.0
.002
.005
.008
.003
.001
.005
.013
.005
.004
.005
.005
.007
.007
.005
.008
.005
.004
.005
.009
.009
.008
.004
.001
.008
.010
.007
.009
.004
.012
.004
.016
.010
.004
.007
.004
.004
.007
.005
.012
.013
.008
Tolerances
A = +.010
B = Up to/including
No. 10: +.005
Over No. 10: +.010
C = Commercial
D = +.005
-.015
ORDER EXAMPLE:
24163 - 31A
Basic
Part Number
Thickness
Available in Stainless Steel* Type 301-304.
Add SS to part number. EXAMPLE: 24163-SS-12
301-304 Passivate
Stainless Steel Finish
*Load and deflection data does not apply
to Stainless Steel.
WASHERS
Basic
Part
Number
229
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
BELLEVILLE WASHERS - SPRING STEEL
Basic
Part
Number
WASHERS
230
24243
24245
24247
24249
24251
24253
24255
24257
24259
24261
24263
24265
24267
24269
24271
24273
24275
24277
24279
24283
24285
24287
24289
24291
24293
24295
24297
24299
24301
24303
24305
24307
24309
24311
24313
24315
24317
24319
24321
24323
24325
Screw
Size
3/8
7/16
1/2
D
C
Calc. Load
at Flat
Position
(LBS)
.055
.080
.080
.055
.045
.060
.080
.080
.095
.135
.053
.069
.069
.110
.045
.090
.092
.129
.096
.080
.080
.062
.070
.035
.080
.080
.085
.135
.112
.110
.250
.162
.125
.139
.187
.095
.107
.075
.082
.110
.080
.040
.015
.025
.040
.022
.040
.062
.050
.036
.080
.032
.032
.040
.062
.018
.062
.062
.109
.072
.015
.025
.031
.040
.010
.015
.025
.035
.062
.065
.060
.112
.134
.083
.109
.093
.050
.050
.040
.040
.060
.040
327.0
96.5
378.1
339.1
143.4
459.1
1538.7
529.1
206.4
3084.8
213.9
171.8
263.0
2736.7
107.5
1169.5
873.5
3125.1
970.1
73.1
286.7
243.4
653.0
3.6
41.9
164.1
409.5
1948.9
1453.4
845.9
14658.3
4319.2
1711.9
2504.3
4873.8
554.2
492.3
338.1
330.1
2318.7
267.7
Dimensions
B
.380
.382
.382
.382
.390
.390
.390
.390
.390
.395
.402
.402
.402
.405
.406
.406
.406
.406
.406
.440
.440
.448
.450
.500
.504
.504
.504
.505
.515
.515
.516
.531
.545
.562
.562
.563
.563
.567
.635
.700
.700
A
.750
.683
.683
.741
.625
.740
.740
1.100
1.500
1.242
.787
1.100
1.100
.875
.607
1.000
1.180
1.187
1.250
.785
.785
.860
.785
1.109
1.000
1.000
1.000
1.250
1.250
1.475
1.500
1.625
1.547
1.625
1.625
1.340
1.573
1.125
1.250
1.067
1.360
Approx.
Load
(LBS)
Approx.
Deflection
(INS)
203.9
131.1
178.7
211.4
71.8
205.6
536.9
265.9
168.0
688.0
129.0
118.5
169.9
510.2
61.0
419.5
388.6
1270.2
545.0
132.8
180.8
132.2
210.4
6.1
115.2
156.5
217.7
564.5
497.1
397.0
1787.9
1887.3
735.8
1287.7
1141.2
307.8
302.8
204.1
219.1
570.0
200.5
.009
.005
.005
.009
.007
.008
.006
.013
.019
.009
.011
.016
.016
.006
.006
.009
.012
.008
.013
.007
.007
.011
.007
.025
.012
.012
.011
.010
.012
.017
.007
.012
.016
.015
.012
.018
.021
.016
.019
.008
.023
Tolerances
A = +.010
B = Up to/including
No. 10: +.005
Over No. 10: +.010
C = Commercial
D = +.005
-.015
ORDER EXAMPLE:
24243 - 31A
Basic
Part Number
Thickness
Available in Stainless Steel* Type 301-304.
Add SS to part number. EXAMPLE: 24243-SS-12
301-304 Passivate
Stainless Steel Finish
*Load and deflection data does not apply
to Stainless Steel.
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
BELLEVILLE WASHERS - SPRING STEEL
Screw
Size
24327
24329
24331
24333
24335
24337
24339
24341
24343
24345
24347
24349
24351
24353
24355
24357
24359
24361
24363
24365
.760
.770
.770
.781
3/4
.803
.812
.817
.830
.960
1.004
1.010
1.031
1.093
1.120
1.00
1.120
1.260
1.260
1.270
1.390
1.484
A
D
C
Calc. Load
at Flat
Position
(LBS)
1.500
1.250
1.500
1.343
1.570
1.180
2.362
1.248
1.250
1.554
2.000
1.500
1.565
1.382
2.250
2.000
2.500
2.060
2.700
1.995
.093
.050
.125
.110
.104
.033
.171
.043
.065
.050
.130
.065
.047
.096
.103
.122
.160
.085
.100
.080
.045
.020
.062
.062
.060
.012
.080
.016
.005
.020
.065
.032
.018
.032
.062
.062
.080
.040
.060
.030
372.5
34.6
1288.8
1346.9
743.0
6.8
1421.5
17.7
1.6
23.7
853.6
126.4
18.6
440.5
366.2
827.6
1252.1
153.1
–
104.9
Dimensions
B
Approx.
Load
(LBS)
Approx.
Deflection
(INS)
265.7
35.1
574.6
535.3
462.0
7.6
788.7
19.2
40.9
24.1
557.1
126.4
19.7
457.1
366.2
559.1
847.0
153.1
–
113.2
.024
.030
.017
.014
.023
.021
.029
.027
.017
.030
.030
.033
.029
.009
.041
.030
.039
.045
–
.045
Tolerances
A = +.010
B = Up to/including
No. 10: +.005
Over No. 10: +.010
C = Commercial
D = +.005
-.015
ORDER EXAMPLE:
24327 - 31A
Basic
Part Number
Thickness
Available in Stainless Steel* Type 301-304.
Add SS to part number. EXAMPLE: 24327-SS-12
301-304 Passivate
Stainless Steel Finish
*Load and deflection data does not apply
to Stainless Steel.
!
WASHERS
Basic
Part
Number
TECH TIP
Nylon locking elements prevent screws and
fasteners from backing out due to vibration.
231
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
CYLINDRICALLY CURVED WASHERS
SPRING STEEL
Basic
Part
Number
The cylindrically curved washer is well-suited
for applications requiring flexibility and light
loads (from ounces up to about a hundred
pounds), and repeated cycles through a range
of motion. Of the cylindrically curved, wave
and Belleville types, the cylindrically curved
washer exhibits the most uniform spring
constant over the widest range of deflection.
WASHERS
Spherically curved washers are frequently
made as segments of spheres instead of
segments of cylinders. Although they are not
true conical washers, they have
approximately the same spring
characteristics. However, the load capacity of
spherically curved washers varies
considerably when deflected near the flat
position. The spherical shape tends to add a
stiffening effect so that, in general, spherically
curved washers will have slightly higher spring
rates than comparable conical washers.
Tolerances
A = +.010
B = Up to/including
No. 10: +.005
Over No. 10: +.010
C = Commercial
D = +.010
ORDER EXAMPLE:
24417 - 1
Basic
Part Number
Finish:
See page 277
Available in Stainless Steel* Type 17-7 Ph (heat treated).
Add SS to part number. EXAMPLE: 24417-SS-12
17-7 Passivate
Stainless Steel Finish
Available in Beryllium Copper* ASTM-B194 (heat treated).
Add BC to part number. EXAMPLE: 24417-BC-1
Beryllium Copper
*Load and deflection data does not apply to
Stainless Steel or Beryllium Copper.
24417
24419
24421
24423
24425
24427
24429
24431
24433
24435
24437
24439
24441
24443
24445
24447**
24449
24451
24453
24455
24459
24461
24463
24465
24467
24469
24471
24473
24475
24477
24479
24481
24483
24485
24487
24489
24491
24493
24495
24497
24499
24501
24503
24505
24507
24509
24511
Screw
Size
#00
#0
#1
#2
#3
#4
Dimensions
B
ID
A
OD
D
.040
.043
.047
.047
.051
.052
.055
.055
.059
.064
.064
.064
.064
.065
.065
.067
.068
.070
.075
.084
.092
.093
.095
.095
.096
.096
.097
.097
.097
.097
.097
.098
.098
.099
.100
.101
.109
.109
.112
.112
.112
.112
.112
.117
.118
.122
.122
.105
.088
.120
.120
.378
.133
.240
.350
.183
.130
.130
.250
.379
.133
.371
.600
.145
.240
.158
.130
.163
.170
.312
.320
.140
.250
.193
.193
.210
.302
.302
.403
.438
.205
.625
.147
.203
.250
.220
.240
.273
.375
.437
.313
.203
.250
.377
.018
.015
.025
.032
.047
.035
.040
.060
.047
.025
.032
.030
.047
.037
.065
.100
.030
.055
.047
.035
.047
.026
.077
.055
.031
.040
.047
.047
.040
.030
.030
.047
.060
.040
.090
.040
.032
.062
.025
.040
.047
.090
.090
.047
.032
.036
.060
C
.006
.004
.004
.004
.005
.005
.015
.005
.005
.006
.006
.003
.010
.008
.018
.004
.005
.005
.003
.008
.005
.004
.007
.008
.003
.005
.005
.010
.010
.006
.008
.006
.010
.010
.010
.005
.005
.005
.003
.010
.005
.005
.005
.008
.005
.016
.007
Calc. Load Approx
Deflection
at flat
(INS)
pos. (LBS)
3.2
1.2
1.4
1.4
3.1
2.2
25.4
3.0
2.4
2.6
2.6
0.9
12.1
4.7
39.1
1.8
1.9
2.5
0.6
3.3
1.5
1.0
4.9
6.6
0.4
2.2
1.8
7.2
7.8
3.5
8.0
3.9
11.3
7.5
12.3
1.1
1.6
2.0
0.6
7.8
2.1
2.5
2.7
5.8
1.5
19.2
4.8
.002
.002
.004
.004
.035
.004
.005
.030
.008
.003
.003
.025
.018
.003
.009
.096
.005
.014
.010
.003
.006
.009
.017
.016
.008
.015
.009
.005
.005
.019
.012
.033
.023
.005
.048
.005
.010
.015
.020
.007
.018
.034
.047
.015
.010
.005
.025
** This item is available in Beryllium Copper only .
232
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
CYLINDRICALLY CURVED WASHERS
SPRING STEEL
Tolerances
A = +.010
B = Up to/including
No. 10: +.005
Over No. 10: +.010
C = Commercial
D = +.010
ORDER EXAMPLE:
24513 - 1
Basic
Part Number
Finish:
See page 277
Available in Stainless Steel* Type 17-7 Ph (heat treated).
Add SS to part number. EXAMPLE: 24513-SS-12
17-7 Passivate
Stainless Steel Finish
Available in Beryllium Copper* ASTM-B194 (heat treated).
Add BC to part number. EXAMPLE: 24513-BC-1
Beryllium Copper
*Load and Deflection data does not apply to
Stainless Steel or Beryllium Copper.
!
TECH
TIP
The cylindrically
curved washer is
well-suited for
applications
requiring flexibility
and light loads
(from ounces
up to about a
hundred pounds).
24513
24515
24517
24519
24521
24523
24525
24527
24529
24531
24470
24533
24535
24537
24539
24541
24543
24545
24549
24551
24553
24555
24557
24559
24561
24563
24565
24567
24569
24571
24573
24575
24577
24579
24581
24583
24585
24587
24589
24591
24593
24595
24597
24599
24601
24603
24605
Screw
Size
#4
#5
#6
Dimensions
B
ID
A
OD
D
.122
.125
.125
.125
.125
.125
.126
.127
.127
.127
.127
.128
.128
.128
.128
.128
.128
.130
.130
.130
.132
.133
.134
.135
.135
.136
.136
.136
.136
.137
.137
.137
.137
.137
.139
.140
.140
.140
.140
.141
.141
.141
.141
.144
.144
.145
.145
.378
.247
.247
.250
.250
.406
.213
.176
.213
.406
.500
.198
.230
.240
.240
.250
.750
.219
.468
.687
.503
.285
.437
.245
.285
.312
.312
.370
.400
.250
.253
.283
.283
.283
.317
.365
.406
.490
.562
.213
.281
.373
.467
.312
.312
.312
.490
.047
.062
.062
.047
.047
.070
.035
.032
.018
.050
.068
.040
.047
.041
.041
.025
.030
.032
.060
.060
.078
.062
.094
.032
.062
.062
.062
.035
.065
.020
.047
.047
.062
.062
.062
.065
.060
.080
.060
.048
.047
.062
.058
.047
.048
.030
.080
C
.008
.003
.005
.008
.012
.008
.005
.010
.005
.005
.012
.008
.008
.005
.008
.012
.005
.007
.005
.010
.010
.006
.010
.006
.006
.006
.010
.008
.010
.005
.005
.008
.005
.010
.010
.005
.005
.020
.012
.008
.008
.010
.010
.016
.016
.003
.005
Calc. Load Approx
Deflection
at flat
(INS)
pos. (LBS)
6.3
0.6
1.8
4.6
10.5
6.4
1.4
4.0
1.4
2.5
–
3.3
4.1
1.7
4.3
10.3
–
2.9
2.6
10.3
10.8
2.8
10.1
2.3
2.7
2.9
8.2
5.9
9.6
1.6
1.6
4.8
1.8
7.5
8.2
2.2
2.4
41.9
15.8
3.1
4.6
9.1
10.2
20.2
20.2
0.4
2.5
.022
.025
.015
.010
.006
.025
.011
.004
.011
.040
–
.006
.008
.014
.009
.006
–
.008
.054
.050
.031
.017
.023
.012
.017
.020
.012
.021
.020
.015
.016
.012
.020
.010
.012
.033
.040
.015
.032
.007
.012
.017
.027
.007
.007
.027
.059
WASHERS
Basic
Part
Number
233
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
CYLINDRICALLY CURVED WASHERS
SPRING STEEL
Basic
Part
Number
Tolerances
A = +.010
B = Up to/including
No. 10: +.005
Over No. 10: +.010
C = Commercial
D = +.010
ORDER EXAMPLE:
24607 - 1
Basic
Part Number
Finish:
See page 277
WASHERS
Available in Stainless Steel* Type 17-7 Ph (heat treated).
Add SS to part number. EXAMPLE: 24607-SS-12
17-7 Passivate
Stainless Steel Finish
Available in Beryllium Copper* ASTM-B194 (heat treated).
Add BC to part number. EXAMPLE: 24607-BC-1
Beryllium Copper
*Load and Deflection data does not apply to
Stainless Steel or Beryllium Copper.
234
24607
24609
24611
24613
24615
24617
24619
24621
24623
24625
24627
24629
24631
24633
24635
24637
24639
24641
24643
24645
24647
24649
24651
24653
24655
24657
24659
24661
24663
24665
24667
24669
24671
24673
24675
24677
24679
24681
24683
24685
24687
24689
24691
24693
24695
24697
Screw
Size
#6
#8
Dimensions
B
ID
A
OD
D
.147
.148
.149
.149
.149
.150
.150
.155
.157
.159
.161
.161
.161
.161
.161
.166
.168
.169
.169
.169
.169
.170
.172
.172
.172
.172
.172
.173
.174
.174
.174
.177
.178
.178
.185
.187
.187
.187
.188
.188
.189
.189
.190
.188
.193
.193
.640
.200
.277
.277
.322
.240
.275
.312
.381
.562
.249
.249
.249
.301
.302
.270
.280
.312
.437
.517
.518
.405
.241
.302
.344
.365
.562
.625
.250
.322
.400
.993
.375
.498
.315
.440
.440
.562
.314
.375
.312
.343
.375
.314
.375
.437
.062
.060
.060
.062
.030
.045
.062
.062
.062
.070
.047
.047
.047
.047
.080
.030
.046
.030
.060
.090
.062
.062
.040
.048
.050
.065
.070
.030
.040
.064
.030
.062
.090
.062
.062
.030
.062
.078
.047
.040
.062
.030
.050
.047
.066
.065
C
.005
.015
.004
.007
.010
.010
.005
.010
.010
.015
.005
.007
.010
.005
.005
.008
.010
.005
.005
.010
.015
.010
.006
.005
.006
.005
.015
.015
.015
.005
.006
.010
.010
.030
.015
.010
.010
.008
.005
.008
.004
.010
.005
.005
.006
.008
Calc. Load Approx
Deflection
at flat
(INS)
pos. (LBS)
1.6
8.5
1.0
3.3
7.8
5.5
1.6
7.3
8.6
23.6
1.2
2.5
5.1
1.7
1.7
3.6
5.8
1.6
2.2
9.8
22.2
8.5
1.5
1.5
2.6
1.9
22.9
11.2
10.0
1.6
2.1
5.2
7.7
84.8
13.6
7.1
8.4
6.2
1.4
4.6
0.9
6.5
1.8
9.0
1.1
5.2
.057
.003
.023
.013
.013
.007
.018
.012
.018
.026
.015
.011
.008
.022
.022
.011
.010
.024
.047
.033
.022
.020
.012
.022
.024
.033
.026
.015
.005
.025
.024
.052
.017
.010
.008
.020
.024
.048
.024
.021
.030
.014
.034
.031
.043
.029
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
CYLINDRICALLY CURVED WASHERS
SPRING STEEL
Tolerances
A = +.010
B = Up to/including
No. 10: +.005
Over No. 10: +.010
C = Commercial
D = +.010
ORDER EXAMPLE:
24699 - 1
Basic
Part Number
Finish:
See page 277
Available in Stainless Steel* Type 17-7 Ph (heat treated).
Add SS to part number. EXAMPLE: 24699-SS-12
17-7 Passivate
Stainless Steel Finish
Available in Beryllium Copper* ASTM-B194 (heat treated).
Add BC to part number. EXAMPLE: 24699-BC-1
Beryllium Copper
*Load and Deflection data does not apply to
Stainless Steel or Beryllium Copper.
!
TECH
TIP
The cylindrically
curved washer
exhibits the
most uniform
spring constant
over the widest
range of
deflection.
24699
24701
24703
24705
24707
24709
24711
24713
24715
24717
24719
24721
24723
24725
24727
24729
24731
24733
24735
24737
24480
24739
25100
25102
25104
25106
25108
25110
25112
25114
25116
25118
25120
25122
25124
25126
25128
25130
25132
25134
25136
25138
25140
25142
25144
25146
25148
Screw
Size
#10
#12
Dimensions
B
ID
A
OD
.194
.194
.194
.195
.195
.195
.195
.195
.196
.198
.199
.199
.200
.200
.200
.201
.201
.202
.202
.202
.203
.203
.203
.203
.203
.203
.203
.203
.204
.204
.204
.205
.205
.205
.208
.220
.220
.228
.228
.231
.234
.234
.235
.235
.239
.239
.239
.370
.375
.630
.277
.312
.400
.490
.562
.750
.442
.375
.443
.302
.430
.990
.300
.374
.312
.505
.505
.322
.365
.375
.375
.406
.438
.500
.501
.438
.565
.640
.369
.500
1.010
.563
.406
.740
.375
.468
.423
.438
.630
.325
.410
.438
.500
.625
D
.050
.070
.090
.060
.030
.060
.030
.070
.093
.062
.041
.055
.045
.070
.062
.050
.065
.062
.062
.062
.060
.032
.062
.062
.047
.070
.080
.074
.070
.052
.045
.080
.080
.085
.062
.060
.130
.041
.125
.050
.077
.062
.047
.062
.095
.050
.100
C
.008
.006
.020
.005
.010
.016
.010
.008
.020
.010
.010
.005
.005
.010
.010
.010
.005
.010
.005
.012
.015
.005
.005
.010
.005
.010
.015
.015
.010
.025
.005
.005
.015
.063
.012
.005
.010
.010
.016
.010
.010
.012
.010
.010
.010
.015
.015
Calc. Load Approx
Deflection
at flat
(INS)
pos. (LBS)
4.4
2.5
40.6
1.0
5.5
19.2
6.0
6.1
43.3
8.0
6.8
2.0
1.2
7.8
5.0
4.8
1.6
5.1
2.0
12.6
–
1.3
1.6
6.7
1.8
7.8
19.6
19.6
7.8
58.5
0.9
1.6
19.4
463.9
13.3
1.6
10.3
5.7
19.2
6.6
6.8
13.2
4.0
6.2
6.6
17.2
20.3
.021
.029
.024
.019
.012
.012
.020
.048
.034
.024
.017
.048
.022
.023
.052
.011
.034
.012
.057
.026
–
.027
.034
.017
.040
.023
.020
.020
.023
.016
.040
.033
.020
.020
.032
.040
.067
.017
.017
.022
.023
.040
.013
.021
.023
.020
.032
WASHERS
Basic
Part
Number
235
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
CYLINDRICALLY CURVED WASHERS
SPRING STEEL
Basic
Part
Number
Tolerances
A = +.010
B = Up to/including
No. 10: +.005
Over No. 10: +.010
C = Commercial
D = +.010
ORDER EXAMPLE:
25150 - 1
Basic
Part Number
Finish:
See page 277
WASHERS
Available in Stainless Steel* Type 17-7 Ph (heat treated).
Add SS to part number. EXAMPLE: 25150-SS-12
17-7 Passivate
Stainless Steel Finish
Available in Beryllium Copper* ASTM-B194 (heat treated).
Add BC to part number. EXAMPLE: 25150-BC-1
Beryllium Copper
*Load and Deflection data does not apply to
Stainless Steel or Beryllium Copper.
236
25150
25152
25154
25156
25158
25160
25162
25164
25166
25168
25170
25172
25174
25176
25178
25180
25182
25184
25186
25188
25190
25192
25194
25196
25198
25200
25202
25204
25206
25208
25210
25212
25214
25216
25218
25220
25222
25224
25226
25228
25230
25232
25234
25236
25238
25240
25242
Screw
Size
#14
1/4
Dimensions
B
ID
A
OD
.250
.250
.250
.250
.250
.250
.251
.251
.252
.253
.253
.254
.254
.255
.256
.257
.257
.258
.259
.259
.259
.260
.260
.261
.261
.262
.262
.262
.262
.263
.263
.263
.263
.263
.263
.265
.265
.265
.265
.265
.265
.265
.265
.265
.265
.269
.270
.437
.437
.495
.500
.562
.625
.562
.750
1.065
.406
.469
.497
.497
.750
.406
.438
.438
.680
.406
.562
.691
.495
.508
.740
.875
.378
.378
.438
.562
.433
.433
.433
.437
.437
.437
.406
.406
.490
.500
.508
.508
.508
.552
.562
.625
.435
.380
D
.047
.090
.125
.078
.078
.078
.037
.070
.093
.030
.047
.100
.100
.093
.032
.040
.047
.080
.062
.080
.070
.125
.055
.130
.060
.062
.062
.050
.060
.047
.047
.047
.062
.062
.062
.044
.062
.092
.070
.093
.093
.093
.075
.125
.075
.068
.060
C
.010
.010
.007
.006
.020
.020
.007
.030
.015
.005
.010
.006
.010
.012
.006
.005
.015
.010
.018
.018
.006
.007
.015
.010
.030
.005
.010
.010
.008
.005
.008
.015
.005
.008
.012
.010
.010
.008
.020
.010
.015
.028
.008
.025
.015
.010
.010
Calc. Load Approx
Deflection
at flat
(INS)
pos. (LBS)
6.2
6.2
3.5
2.6
32.5
35.2
2.1
87.8
21.2
0.8
6.7
2.5
7.1
13.9
1.5
1.1
13.6
9.1
17.2
25.6
2.1
3.4
16.1
9.4
89.0
1.1
4.5
5.8
5.0
1.3
3.6
12.9
1.4
3.7
8.4
5.0
5.0
4.3
27.5
7.0
15.7
59.0
4.8
48.4
19.0
5.5
4.2
.023
.023
.043
.051
.019
.024
.030
.023
.078
.025
.027
.050
.030
.057
.026
.035
.016
.057
.011
.021
.064
.043
.021
.067
.030
.035
.017
.023
.048
.042
.029
.015
.047
.029
.019
.020
.020
.037
.015
.032
.021
.011
.047
.015
.032
.023
.018
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
CYLINDRICALLY CURVED WASHERS
SPRING STEEL
Tolerances
A = +.010
B = Up to/including
No. 10: +.005
Over No. 10: +.010
C = Commercial
D = +.010
ORDER EXAMPLE:
25244 - 1
Basic
Part Number
Finish:
See page 277
Available in Stainless Steel* Type 17-7 Ph (heat treated).
Add SS to part number. EXAMPLE: 25244-SS-12
17-7 Passivate
Stainless Steel Finish
Available in Beryllium Copper* ASTM-B194 (heat treated).
Add BC to part number. EXAMPLE: 25244-BC-1
Beryllium Copper
*Load and Deflection data does not apply to
Stainless Steel or Beryllium Copper.
25244
25246
25248
25250
25252
25254
25256
25258
25260
25262
25264
25266
25268
25270
25272
25274
25276
25278
25280
25282
25284
25286
25288
25290
25292
25294
25296
25298
25300
25302
25304
25306
25308
25310
25312
25314
25316
25318
25320
25322
25324
25326
25328
25330
25332
25334
25336
Screw
Size
1/4
5/16
Dimensions
B
ID
A
OD
.270
.270
.272
.275
.275
.280
.280
.280
.280
.280
.280
.280
.280
.280
.280
.290
.296
.301
.312
.315
.315
.315
.316
.316
.319
.320
.320
.323
.323
.323
.326
.326
.327
.328
.328
.328
.330
.330
.331
.331
.331
.331
.346
.363
.375
.375
.375
.500
.500
.496
.599
.600
.375
.500
.552
.625
.625
.625
.625
.625
.625
.740
.437
.551
.671
.562
.500
.625
.625
.490
.625
.500
.625
.688
.415
.415
.415
.490
1.000
.620
.500
.562
.562
.750
.875
.622
.622
.622
.622
.761
.672
.600
.750
.870
D
.060
.060
.060
.055
.035
.030
.090
.075
.093
.093
.093
.093
.093
.093
.135
.060
.085
.093
.093
.060
.062
.095
.040
.098
.075
.080
.080
.062
.062
.062
.062
.093
.085
.080
.080
.125
.187
.040
.093
.093
.093
.093
.187
.080
.070
.140
.109
C
.010
.020
.010
.010
.018
.005
.010
.015
.006
.008
.010
.012
.015
.020
.010
.005
.010
.012
.020
.010
.010
.010
.010
.020
.015
.012
.010
.003
.008
.015
.010
.050
.010
.008
.008
.025
.030
.010
.006
.012
.015
.025
.020
.015
.025
.020
.010
Calc. Load Approx
Deflection
at flat
(INS)
pos. (LBS)
6.7
26.9
6.6
7.9
17.9
0.6
6.4
16.2
2.9
5.1
8.0
11.6
18.2
32.3
9.1
1.2
6.7
11.6
26.0
5.4
7.2
7.2
5.2
29.0
11.9
10.3
7.8
0.2
2.0
7.3
4.9
247.1
6.9
3.2
3.9
38.1
73.9
2.9
2.4
9.8
15.4
42.8
31.9
15.1
34.3
29.3
8.3
.031
.015
.030
.044
.017
.025
.031
.025
.080
.060
.048
.040
.032
.024
.067
.047
.037
.046
.019
.031
.048
.048
.029
.024
.020
.040
.058
.059
.026
.014
.029
.024
.047
.038
.048
.015
.023
.030
.079
.039
.032
.019
.035
.037
.018
.034
.093
WASHERS
Basic
Part
Number
237
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
CYLINDRICALLY CURVED WASHERS
SPRING STEEL
Basic
Part
Number
Tolerances
A = +.010
B = Up to/including
No. 10: +.005
Over No. 10: +.010
C = Commercial
D = +.010
ORDER EXAMPLE:
25338 - 1
Basic
Part Number
Finish:
See page 277
WASHERS
Available in Stainless Steel* Type 17-7 Ph (heat treated).
Add SS to part number. EXAMPLE: 25338-SS-12
17-7 Passivate
Stainless Steel Finish
Available in Beryllium Copper* ASTM-B194 (heat treated).
Add BC to part number. EXAMPLE: 25338-BC-1
Beryllium Copper
*Load and Deflection data does not apply to
Stainless Steel or Beryllium Copper.
238
25338
24664
25340
25342
25344
25346
25348
25350
25352
25354
25356
25358
25360
25362
25364
25366
25368
25370
25372
25374
25376
25378
25380
25382
25384
25386
25388
25390
25394
25396
25398
25402
25404
25406
25408
25410
25412
25414
25416
25418
25420
25422
25424
25426
25428
25430
25432
Screw
Size
5/16
3/8
7/16
1/2
5/8
3/4
Dimensions
B
ID
A
OD
.377
.378
.378
.379
.379
.379
.379
.383
.383
.385
.390
.390
.390
.391
.400
.406
.438
.439
.455
.468
.470
.474
.477
.502
.504
.505
.505
.505
.514
.515
.516
.520
.525
.531
.537
.585
.600
.614
.640
.640
.640
.658
.665
.720
.765
.890
.890
.465
.562
.685
.500
.563
.563
.686
.625
.691
.687
.553
.740
.740
.656
.600
.524
.740
.623
.740
.686
.870
.709
.708
1.003
.938
.740
.740
.815
.874
.875
.744
.870
.980
.873
.753
.875
.850
.880
.750
.875
1.000
1.750
.980
1.000
.910
1.093
1.095
D
.093
.080
.100
.070
.080
.080
.093
.078
.070
.040
.075
.140
.140
.125
.093
.060
.140
.093
.140
.130
.116
.115
.120
.093
.100
.125
.130
.093
.032
.125
.093
.109
.110
.156
.093
.135
.080
.062
.050
.060
.100
.219
.100
.150
.100
.130
.093
C
.006
.010
.005
.010
.010
.020
.010
.010
.008
.016
.006
.010
.020
.025
.012
.010
.015
.012
.010
.005
.010
.015
.010
.012
.032
.010
.015
.029
.020
.015
.010
.010
.021
.010
.012
.010
.020
.020
.010
.010
.030
.020
.020
.015
.020
.010
.032
Calc. Load Approx
Deflection
at flat
(INS)
pos. (LBS)
0.9
–
1.3
3.5
4.7
19.1
6.5
5.6
3.5
10.9
1.5
6.9
27.7
37.0
7.0
3.3
13.4
6.2
5.6
1.1
6.7
10.9
4.17
8.3
69.4
4.6
10.4
46.9
6.2
13.5
4.4
5.9
30.0
5.7
6.0
4.8
17.2
15.7
1.2
2.1
47.5
36.6
18.8
9.2
9.3
2.2
28.1
.044
–
.095
.031
.039
.019
.058
.048
.062
.024
.062
.067
.033
.021
.037
.034
.045
.040
.067
.115
.093
.041
.061
.081
.034
.067
.045
.028
.012
.062
.068
.093
.056
.093
.058
.094
.044
.042
.040
.050
.041
.187
.059
.081
.051
.120
.046
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
WAVE WASHERS - SPRING STEEL
When the load is static or the working range is small,
and the allowable amount of axial space is limited, the
use of a wave washer is an ef
ficient method of
obtaining the required loading. Loads obtainable from
wave washers are usually in the range of a few pounds
to hundreds of pounds. These springs are often used
as cushion springs or cushion spacers between parts
on shafts, or to take up the expected amount of
variation in assembled parts. W ave washers can be
made in a very large range of sizes.
Tolerances
A = +.010
B = Up to/including
No. 10: +.005
Over No. 10: +.010
C = Commercial
D = +.010
ORDER EXAMPLE:
24981 - 1
Basic
Part Number
Finish:
See page 277
Available in Stainless Steel* Type 17-7 Ph (heat treated).
Add SS to part number. EXAMPLE: 24981-SS-12
17-7 Passivate
Stainless Steel Finish
Available in Beryllium Copper* ASTM-B194 (heat treated).
Add BC to part number. EXAMPLE: 24981-BC-1
Beryllium Copper
*Load and Deflection data does not apply to
Stainless Steel or Beryllium Copper.
24981
24983
24985
24987
24989
24991
24993
24995
24997
24741
24743
24745
24747
24749
24751
24753
24755
24757
24759
24761
24763
24765
24767
24769
24771
24773
24775
24777
24779
24781
24783
24785
24787
24789
24791
24793
24795
24797
24799
Dimensions
B
ID
.093
.096
.096
.098
.110
.110
.120
.125
.128
.128
.128
.129
.131
.132
.143
.154
.155
.160
.165
.167
.167
.169
.169
.175
.180
.185
.187
.190
.193
.198
.198
.200
.201
.203
.203
.203
.203
.206
.219
A
OD
.205
.187
.250
.152
.196
.250
.225
.250
.250
.281
.402
.375
.249
.222
.282
.281
.281
.345
.250
.375
.375
.306
.500
.375
.343
.375
.265
.281
.280
.438
.438
.307
.308
.368
.375
.376
.438
.360
.414
D
C
.030
.025
.030
.032
.033
.040
.030
.062
.015
.045
.035
.040
.015
.032
.042
.042
.045
.060
.025
.040
.040
.060
.050
.030
.030
.035
.060
.030
.040
.060
.060
.060
.040
.045
.031
.055
.050
.060
.071
.004
.005
.004
.005
.012
.008
.006
.032
.003
.006
.007
.005
.003
.005
.005
.005
.006
.012
.005
.006
.016
.008
.016
.007
.010
.006
.008
.010
.016
.015
.025
.008
.005
.016
.005
.006
.010
.010
.020
Approx.
Approx
(LBS)
(INS)
–
7.0
–
4.0
33.7
–
9.4
–
2.5
–
–
–
2.4
5.1
7.1
6.1
8.7
–
3.7
–
–
15.5
–
–
26.9
–
7.1
13.4
27.9
–
–
9.9
–
62.2
6.3
16.2
–
22.4
105.9
.004
.003
.005
.002
.001
.003
.003
.001
.008
.005
.007
.009
.008
.004
.006
.006
.005
.003
.006
.008
.003
.005
.005
.004
.005
.009
.004
.004
.002
.003
.002
.005
–
.003
.011
.005
.004
.005
.003
No. of
Max Load Deflection
Waves
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
3
3
3
3
3
4
4
3
3
3
3
4
4
3
3
WASHERS
Basic
Part
Number
239
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
WAVE WASHERS - SPRING STEEL
Basic
Part
Number
Tolerances
A = +.010
B = Up to/including
No. 10: +.005
Over No. 10: +.010
C = Commercial
D = +.010
ORDER EXAMPLE:
24801 - 1
Basic
Part Number
Finish:
See page 277
WASHERS
Available in Stainless Steel* Type 17-7 Ph (heat treated).
Add SS to part number. EXAMPLE: 24801-SS-12
17-7 Passivate
Stainless Steel Finish
Available in Beryllium Copper* ASTM-B194 (heat treated).
Add BC to part number. EXAMPLE: 24801-BC-1
Beryllium Copper
*Load and Deflection data does not apply to
Stainless Steel or Beryllium Copper.
240
24801
24803
24805
24807
24809
24811
24813
24815
24817
24819
24821
24823
24825
24827
24829
24831
24833
24835
24837
24839
24841
24843
24845
24847
24849
24851
24853
24855
24857
24859
24861
24863
24865
24867
24869
24871
24873
24875
24877
Dimensions
B
ID
.221
.252
.255
.265
.265
.265
.265
.265
.265
.265
.265
.265
.288
.290
.312
.312
.322
.325
.325
.328
.335
.346
.346
.346
.355
.355
.365
.382
.385
.385
.385
.386
.390
.390
.390
.390
.390
.406
.420
A
OD
.374
.750
.345
.365
.375
.406
.432
.500
.500
.500
.500
.562
.410
.531
.463
.463
.420
.500
.500
.682
.562
.562
.562
.562
.500
.561
.485
.625
.500
.500
.531
.495
.562
.625
.655
.655
.655
.650
.524
D
C
.050
.086
.030
.030
.030
.030
.045
.045
.045
.045
.045
.070
.062
.070
.031
.050
.040
.055
.055
.062
.060
.080
.080
.080
.045
.080
.060
.080
.050
.050
.035
.050
.060
.080
.093
.110
.110
.085
.068
.010
.012
.008
.006
.010
.016
.016
.006
.008
.010
.016
.010
.005
.010
.016
.020
.006
.008
.015
.010
.010
.003
.005
.010
.005
.010
.006
.007
.005
.010
.010
.010
.010
.016
.010
.016
.020
.010
.003
Approx.
Approx
(LBS)
(INS)
20.7
–
5.5
3.4
19.6
34.6
42.1
9.5
16.8
26.3
59.3
–
2.8
24.8
54.6
97.2
2.3
10.0
35.1
–
36.0
–
4.6
18.5
2.7
17.0
2.7
9.2
1.5
6.3
9.6
10.3
12.0
40.1
20.3
45.7
81.2
17.7
0.8
.006
.014
.008
.011
.004
.005
.005
.016
.012
.010
.007
.011
.006
.011
.004
.003
.015
.014
.008
.017
.008
–
.028
.014
.024
.014
.020
.024
.026
.013
.015
.013
.015
.012
.018
.012
.009
.019
.050
No. of
Max Load Deflection
Waves
3
3
3
3
4
3
3
3
3
3
3
3
3
3
4
4
3
3
3
3
4
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
WAVE WASHERS - SPRING STEEL
Tolerances
A = +.010
B = Up to/including
No. 10: +.005
Over No. 10: +.010
C = Commercial
D = +.010
ORDER EXAMPLE:
24879 - 1
Basic
Part Number
Finish:
See page 277
Available in Stainless Steel* Type 17-7 Ph (heat treated).
Add SS to part number. EXAMPLE: 24879-SS-12
17-7 Passivate
Stainless Steel Finish
Available in Beryllium Copper* ASTM-B194 (heat treated).
Add BC to part number. EXAMPLE: 24879-BC-1
Beryllium Copper
*Load and Deflection data does not apply to
Stainless Steel or Beryllium Copper.
24879
24881
24883
24885
24887
24889
24891
24893
24895
24897
24899
24901
24903
24905
24907
24909
24911
24913
24915
24917
24923
24925
24927
24929
24931
24933
24935
24937
24939
24941
24943
24945
24947
24949
24951
24953
24955
24957
24959
24961
Dimensions
B
ID
.437
.440
.440
.441
.441
.441
.441
.445
.445
.445
.450
.455
.470
.470
.490
.505
.505
.515
.520
.530
.545
.560
.563
.565
.580
.609
.620
.640
.641
.642
.650
.688
.691
.695
.700
.700
.718
.718
.750
.767
A
OD
.550
.618
.618
.654
.655
.655
.750
.610
.610
.610
.605
.870
.880
.880
.610
.656
.750
.865
.740
.780
.852
.750
.760
.687
.730
.859
.750
.866
.875
1.000
.790
.937
1.000
.945
.850
.875
.920
1.000
1.000
1.125
D
C
.036
.040
.040
.075
.094
.094
.080
.094
.094
.094
.050
.094
.045
.045
.032
.070
.045
.093
.080
.125
.080
.045
.110
.062
.040
.062
.045
.045
.125
.105
.062
.141
.092
.078
.090
.090
.050
.087
.136
.105
.010
.004
.008
.010
.010
.016
.015
.004
.006
.010
.007
.010
.005
.007
.008
.006
.010
.010
.016
.012
.032
.010
.018
.010
.010
.010
.010
.020
.008
.016
.010
.012
.010
.025
.010
.007
.010
.010
.012
.016
Approx.
Approx
(LBS)
(INS)
9.6
1.3
6.8
13.6
13.7
30.8
47.2
1.4
3.3
9.3
4.0
27.0
11.5
22.6
–
4.0
13.7
20.3
25.6
22.3
168.9
8.0
27.4
8.1
9.6
10.8
14.1
41.6
5.8
36.6
8.1
12.9
12.3
55.4
8.1
4.5
9.2
10.1
11.2
27.3
.016
.036
.023
.020
.020
.013
.016
.047
.031
.019
.027
.029
.034
.025
–
.021
.026
.032
.018
.022
.010
.029
.016
.026
.029
.036
.018
.017
.048
.030
.035
.037
.048
.018
.040
.059
.040
.049
.043
.040
No. of
Max Load Deflection
Waves
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
3
3
3
3
3
3
3
3
3
3
4
3
3
3
3
3
3
3
3
3
3
3
3
3
WASHERS
Basic
Part
Number
241
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
WAVE WASHERS - SPRING STEEL
Basic
Part
Number
Tolerances
A = +.010
B = Up to/including
No. 10: +.005
Over No. 10: +.010
C = Commercial
D = +.010
ORDER EXAMPLE:
24963 - 1
Basic
Part Number
Finish:
See page 277
WASHERS
Available in Stainless Steel* Type 17-7 Ph (heat treated).
Add SS to part number. EXAMPLE: 24963-SS-12
17-7 Passivate
Stainless Steel Finish
Available in Beryllium Copper* ASTM-B194 (heat treated).
Add BC to part number. EXAMPLE: 24963-BC-1
Beryllium Copper
*Load and Deflection data does not apply to
Stainless Steel or Beryllium Copper.
!
TECH
TIP
Our full thread captive
screw assemblies are
a good alternative to
SEMS screws.
242
B
ID
24963
.780
24965
.781
24967
.781
24969
.800
24971
.812
24973
.812
24975
.828
25000
.856
25002
.885
25004
.901
25096
.910
25008
.914
25010
.915
25012
.926
25014
.959
25016
.960
25018
.970
25020
1.014
25022
1.015
25024
1.016
25026
1.016
25028
1.044
25030
1.068
25032
1.093
25034
1.135
25036
1.185
25038
1.201
25040
1.250
25042
1.250
25044
1.310
25046** 1.437
25048** 1.500
25050
1.565
25052** 1.656
25054
1.700
25056
1.750
25058
1.781
25060
2.000
25062
2.032
25064
3.475
**Beryllium Copper only.
Dimensions
A
OD
1.060
1.000
1.000
.900
.983
1.095
1.432
1.102
1.311
1.150
1.410
1.078
1.110
1.116
1.115
1.110
1.210
1.245
1.250
1.437
1.500
1.235
1.368
1.365
1.470
1.437
1.543
1.453
2.004
1.556
1.690
1.820
2.010
1.985
1.800
2.000
2.000
2.250
2.875
3.790
D
C
.120
.080
.080
.090
.080
.062
.125
.075
.125
.060
.120
.120
.120
.090
.055
.048
.062
.145
.050
.156
.085
.090
.072
.093
.062
.075
.105
.090
.140
.172
.035
.125
.150
.045
.050
.150
.187
.200
.215
.100
.008
.012
.020
.018
.010
.010
.020
.012
.007
.012
.020
.005
.010
.018
.020
.012
.012
.028
.006
.012
.016
.018
.020
.012
.012
.020
.016
.016
.032
.020
.005
.010
.032
.010
.025
.025
.020
.020
.016
.050
Approx.
Approx
(LBS)
(INS)
5.6
14.8
41.2
15.9
7.9
7.1
87.4
8.4
11.8
12.0
64.0
1.4
8.0
25.2
24.5
5.2
23.6
67.2
0.9
15.9
29.8
22.7
41.3
12.8
4.6
30.7
26.7
28.6
160.6
28.7
–
–
106.8
–
14.4
62.1
34.5
19.7
44.2
81.2
.071
.044
.027
.027
.054
.052
.043
.054
.065
.048
.045
.115
.069
.039
.035
.036
.037
.031
.044
.084
.070
.048
.050
.081
.050
.055
.079
.043
.059
.069
–
–
.067
–
.025
.053
.067
.151
.151
.050
No. of
Max Load Deflection
Waves
3
3
3
3
3
3
3
3
4
3
3
3
3
3
3
3
4
3
3
3
3
3
3
3
3
3
3
4
3
3
4
4
3
4
4
4
4
3
4
4
1-888-208-2008
WASHERS
Fax (973) 244-9177
www.accuratescrew.com
PANEL SCREW WASHERS
For Panel Screw*
Available Material (see page 275)
A
B
S
SS
ORDER EXAMPLE:
800200 - A - 1
Basic
Part Number
Material:
See chart
Finish:
See page 277
If any one dimension change is required, add to part number.
EXAMPLE: 800200-A-1 (A=5/8)
Basic
Part
Number
Thd
Size
800200 4-40
800210 6-32
800215 8-32
800220 10-24
800225 10-32
Aluminum
Brass
Steel
Stainless Steel
A
B
C
D
E
± .005
± .005
± .005
+.000
-.010
± .005
F
Thd
Depth
3/8
7/16
9/16
5/8
5/8
.265
.328
.375
.421
.421
.234
.296
.343
.390
.390
.156
.171
.203
.218
.218
1/64
1/32
1/32
1/32
1/32
.062
.078
.078
.078
.078
± .012
*See page 115 for associated screws.
COUNTERBORE WASHERS
Natural
Black
Red
Blue
Purple
ORDER EXAMPLE:
17400 - A - 1
Basic
Part Number
Material:
See chart
Finish:
See page 277
EXAMPLE FOR NYLON AND DELRIN PARTS: 17400-N-2
Choose color from chart, otherwise Natural is provided.
BLACK
Code
Color
1
2
3
4
5
Brown
Orange
Green
Yellow
Basic Screw
Part No. Size
17400
6
17402
6
17404 5/16
17406 5/16
Available Material (see page 275)
Code
A
B
N
S
SS
D
6
7
8
9
Aluminum
Brass
Nylon
Steel
Stainless Steel
Delrin
C
B
A
D
H
± .010
± .005
± .005
± .005
± .005
.370
.490
.490
.565
.275
.310
.375
.440
.155
.145
.310
.325
.125
.145
.070
.050
.250
.255
.755
.355
FINISHING WASHERS
Countersunk or finishing
washers used with flat-headed
screws provide a smooth
appearance for display cases,
automotive assemblies, sheet
metal construction, cabinet
work, and electrical cabinets
and racks.
Available Material (see page 275)
A
B
N
S
SS
D
ORDER EXAMPLE:
16001 - A - 1
Basic
Part Number
Material:
See chart
Finish:
See page 277
EXAMPLE FOR NYLON AND DELRIN PARTS: 16001-N-2
Choose color from chart, otherwise Natural is provided.
BLACK
Basic
Part
Number
16001
16003
16005
16007
16009
16011
Aluminum
Brass
Nylon
Steel
Stainless Steel
Delrin
WASHERS
Color
Color
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Screw
Size
C
B
A
4
6
8
10
12
1/4
.437
.437
.515
.580
.609
.683
.100
.100
.115
.152
.160
.183
.120
.143
.171
.191
.225
.251
243
1-888-208-2008
NUTS & BUSHINGS
Fax (973) 244-9177
www.accuratescrew.com
POTENTIOMETER,
VOLUME CONTROL AND SWITCH NUTS
Hexagon
Thread
Size
T
H
Available Material (see page 275)
A
B*
N
S*
SS
Aluminum
Brass
Nylon
Steel
Stainless Steel
* Normally stocked; others allow approximately
2 weeks for delivery.
ORDER EXAMPLE:
903000 - B - 9
Basic
Part
Number
Material:
See chart
Finish:
See page
277
Thickness may be changed to accommodate your
requirements, add to part number.
EXAMPLE: 903000-B-9 (T = .250)
NUTS
& BUSHINGS
244
2-56
3-48
4-36
4-40
6-32
8-32
10-32
12-24
1/4-20
1/4-28
1/4-28
1/4-28
1/4-32
1/4-32
1/4-32
1/4-32
1/4-32
1/4-32
1/4-40
5/16-24
5/16-32
3/8-27
3/8-32
3/8-32
3/8-32
3/8-32
7/16-28
15/32-32
15/32-32
15/32-32
15/32-32
15/32-32
1/2-32
1/2-28
5/8-24
Basic
Part
Number
903000
903002
903004
903006
903008
903010
903012
903014
903016
903018
903020
903022
903024
903026
903028
903030
903032
903034
903036
903038
903040
903042
903044
903046
903048
903050
903052
903054
903056
903058
903060
903062
903064
903066
903068
Dimensions
H
T
Hex
Thickness
3/16
1/16
3/16
1/16
1/4
3/32
1/4
3/32
5/16
7/64
5/16
1/8
5/16
1/8
3/8
1/8
7/16
3/16
3/8
3/32
3/8
1/8
7/16
.100
5/16
1/16
5/16
5/64
11/32
1/16
11/32
1/8
3/8
3/32
3/8
1/8
5/16
1/16
7/16
1/8
7/16
.101
1/2
1/16
1/2
1/16
1/2
3/32
1/2
1/8
9/16
3/32
9/16
3/32
9/16
1/16
9/16
5/64
9/16
3/32
5/8
1/16
5/8
5/64
9/16
5/64
5/8
1/8
3/4
3/32
1-888-208-2008
NUTS & BUSHINGS
Fax (973) 244-9177
www.accuratescrew.com
KNURLED THUMB NUTS
ORDER EXAMPLE:
67300 - A - 1
Basic
Part Number
C
Material:
See chart
Finish:
See page 277
B
A
B
S
SS
Aluminum
Brass
Steel
Stainless Steel
For parts not listed, contact sales of fice.
D
A
Available Material (see page 275)
E
1/64 x 45°
Chamfer
Basic Part
Number
Thread
67300
67302
67304
67306
67308
67310
67312
67314
67316
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
5/16-18
3/8-16
A
+.020
-.000
C
Ref.
D
E
± .015
± .010
± .031
1/4
5/16
3/8
7/16
1/2
1/2
9/16
5/8
3/4
1/8
1/8
1/8
1/8
5/32
5/32
5/32
3/16
7/32
1/4
1/4
9/32
9/32
11/32
11/32
3/8
13/32
15/32
1/8
1/8
5/32
5/32
3/16
3/16
7/32
7/32
1/4
3/16
1/4
11/32
3/8
13/32
13/32
15/32
17/32
5/8
B
HEX THUMB NUTS
Available Material (see page 275)
ORDER EXAMPLE:
67300 - A - 1
Basic
Part Number
Material:
See chart
A
B
S
SS
Finish:
See page 277
1/64 x 45°
Chamfer
E
B
Basic Part
Number
Thread
A
Hex
C
Ref.
D
E
± .015
± .010
± .031
67318
67320
67322
67324
67326
67328
67330
67334
67336
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
5/16-18
3/8-16
1/4
5/16
3/8
7/16
1/2
1/2
9/16
5/8
3/4
1/8
1/8
1/8
1/8
5/32
5/32
5/32
3/16
7/32
1/4
1/4
9/32
9/32
11/32
11/32
3/8
13/32
15/32
1/8
1/8
5/32
5/32
3/16
3/16
7/32
7/32
1/4
3/16
1/4
11/32
3/8
13/32
13/32
15/32
17/32
5/8
NUTS
D
& BUSHINGS
For parts not listed, contact sales of fice.
C
B
A
Aluminum
Brass
Steel
Stainless Steel
245
1-888-208-2008
NUTS & BUSHINGS
Fax (973) 244-9177
www.accuratescrew.com
HEX MACHINE SCREW NUTS
Standard and Stock Size
HEX
Available Material (see page 275)
B
Brass
S
Steel
SS
NUTS
& BUSHINGS
246
T
ORDER EXAMPLE:
3608 - SS - 12
Basic
Part Number
Stainless Steel
N
Nylon
D
Delrin
Material:
See chart
Finish:
See page 277
Any one dimension may be changed, add to the part number.
EXAMPLE:
3609-SS-12 (T = .375)
Thread
Hex
Thickness
2-56
4-40
6-32
8-32
10-32
1/4-20
1/4-28
5/16-18
3/8-16
3/8-24
1/2-13
1/2-20
5/8-11
5/8/18
3/4-10
3/4-16
3/16
1/4
5/16
11/32
3/8
7/16
7/16
1/2
5/8
5/8
3/4
3/4
15/16
15/16
1-1/8
1-1/8
1/16
3/32
7/64
1/8
1/8
3/16
3/16
17/64
21/64
21/64
7/16
7/16
35/64
35/64
41/64
41/64
Basic Part
Number
3608
3609
3613
3617
3622
3626
3630
3631
3632
3636
3640
3642
3644
3646
3648
3649
Finish
1-888-208-2008
NUTS & BUSHINGS
Fax (973) 244-9177
www.accuratescrew.com
ASSORTED NYLON NUTS
Stocked in Nylon Zytel 101 UL 94V2
G
H
CAP
F
G
H
LOCK**
G
F
HEX
H
SELFTHREADING
HEX
F
G
H
F
G
2-56
3-48
4-40
6-32
6-40
8-32
10-24
10-32
1/4-20
1/4-28
5/16-18
3/8-16
1/2-13
5/8-11
4-40
6-32
8-32
10-24
10-32
1/4-20
1/4-28
5/16-18
3/8-16
1/2-13
5/8-11
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
.180
.180
.250
.305
.305
.335
.365
.365
.425
.425
.500
.560
.750
.925
.250
.305
.330
.365
.365
.425
.425
.500
.560
.750
.925
.180
.250
.305
.335
.365
.365
.425
.180
.250
.305
.335
.365
.365
.425
.205
.205
.275
.350
.350
.380
.420
.420
.510
.510
.575
.630
.860
1.05
.275
.350
.385
.420
.420
.510
.510
.575
.630
.860
1.05
.205
.275
.350
.380
.420
.420
.510
.205
.275
.350
.380
.420
.420
.510
.070
.070
.100
.120
.120
.130
.135
.135
.200
.200
.270
.330
.430
.550
.280
.345
.375
.400
.400
.475
.475
.530
.620
.810
1.00
.140
.180
.200
.230
.250
.250
.275
.110
.180
.200
.230
.250
.250
.275
Other material available, check with factory.
Color
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
Code
1
2
3
4
5
6
7
8
9
ORDER EXAMPLE:
113794 - N - 1
Basic
Part Number
Nylon
Color:
See chart
Choose color from chart, otherwise Natural is provided.
C
SLOTTED
A
B
Part
Number
113862
113864
113866
113868
113870
113872
Thread
A
B
4-40
6-32
8-32
10-24
10-32
1/4-20
.280
.324
.378
.357
.357
.383
.317
.348
.381
.412
.412
.492
C
E
.039 045
.044 .051
.049 .059
.056 .068
.056 .068
.070 .088
B
THUMB
A
C
Part
Number
113874
113876
113878
113880
113882
113884
D
E
Thread
A
B
C
4-40
6-32
8-32
10-24
10-32
1/4-20
.300
.360
.425
.425
.425
.540
.280
.275
.305
.325
.325
.365
.120
.125
.140
.140
.140
.155
WING
A
B
Part
Thread
Number
113886
4-40
113888
6-32
113890
8-32
113892 10-24
113894 10-32
113896 10-24
113898 10-32
113900 1/4-20
113902 1/4-28
113904 1/4-20
113906 1/4-28
113908 5/16-18
113910 3/8-16
113912 7/16-14
113914 1/2-13
113916 9/16-12
A
B
D
E
.90
.50
.25
.41
1.10
.63
.30
.56
1.38
.72
.36
.65
1.75
.90
.58
.85
& BUSHINGS
F
E
H
Thread
NUTS
HEX
Basic Part
Number
113794
113796
113798
113800
113802
113804
113806
113808
113810
113812
113814
113816
113818
113820
113822
113824
113826
113828
113830
113832
113823
113825
113827
113829
113831
113834
113836
113838
113840
113842
113844
113846
113848
113850
113852
113854
113856
113858
113860
**Locking element is located approx. on last two threads at exit
side of nut with minor diameter undersize.
247
1-888-208-2008
NUTS & BUSHINGS
Fax (973) 244-9177
www.accuratescrew.com
BLIND NUTS
This Blind Nut fastener consists of a knurled
aluminum/brass nut in a tapered wall nylon cage. Driving
a screw into the nut during assembly draws the nut up,
expanding the cage wall and locking it into the hole.
Blind Nuts are priced competitively
, require only
production tolerance round holes; have the lowest
assembly cost of any blind nut; and thereby reduce the
in-place cost.
FEATURES AND ADVANTAGES
• Spring tension of nylon cage securely holds nut in
hole prior to final assembly
• Fits all sheet thicknesses. It can be used in metal,
fiberglass and plastic
• Protects prefinished or brittle surfaces as only the
nylon comes in contact with sheet material
• Makes assembly rattle-proof and dampens
vibration
• Made from corrosion resistant materials; the nylon
cage and the aluminum/brass nut
Insert into either drilled or stamped holes with finger pr essure, requires no special installation tools.
C
TH
Insert into hole
SHEET
THICKNESS
D
Stays in place
NUTS
& BUSHINGS
248
Drive screw
How To Use Blind Nuts
1. Drill or stamp a hole to dimension D.
2. Push fastener into hole with finger pressure or light tap.
3. Select screw length as specified.
4. Locate component to be attached over Blind Nut and insert screw .
5. Drive screw until solid resistance is felt.
6. The component to be attached must not turn while driving the
screw. Torque must not be transmitted from the screw head to the
head of nylon cage. Washers alone are not acceptable since they
will turn.
Basic
Part
Number
301019A
301019B*
301020A
301020B*
301030A*
301030B*
301040A
301040B*
301045A
301045B*
301050A
301050B*
301055A*
301055B
301056A*
301056B
Available Material
A
B
Aluminum
Brass
ORDER EXAMPLE:
301019 - A - 4-40
Basic
Part Number
Thread
UNC
UNF
Metric
4-40
4-48
m2.5
5/16
.030
.250
+.003
-.000
5/16 + Dim C
25 lbs
6-32
6-40
m3
3/8
.030
.312
+.004
-.000
3/8 + Dim C
85 lbs
8-32
–
m4
1/2
.030
.406
+.005
-.000
1/2 +Dim C
220 lbs
10-24
–
m5
1/2
.030
.406
+.005
-.000
1/2 + Dim C
220 lbs
–
10-32
m5
1/2
.030
.406
+.005
-.000
1/2 + Dim C
220 lbs
1/4-20
–
m6
5/8
.030
.500
+.006
-.000
5/8 + Dim C
275 lbs
–
1/4-28
m6
5/8
.030
.500
+.006
-.000
5/8 + Dim C
275 lbs
5/16-18 5/16-24
m8
.672
.030
.562
+.006
-.000
11/16 + Dim C
300 lbs
*Available from stock, all others allow 4 to 6 weeks.
D
Hole
Size
Material:
See chart
H
Cage
Length
Available Threads
T
Head
Thick
Locked in place
Minimum
Recommended
Screw Length
Average
Pullout
1-888-208-2008
NUTS & BUSHINGS
Fax (973) 244-9177
www.accuratescrew.com
KNURLED PHENOLIC HAND SCREWS & NUTS
HAND NUTS:
Brass Female Threads
The metal screws and bushings cannot slip in
the head under high torque loads because they
are permanently locked in during the molding
operation. Molded of phenolic plastic, these
hand nuts and screws are excellent electrical
insulators and have high heat resistance (up to
300° F) and are highly resistant to most
chemicals and solvents.
Available in Black only.
Styles Available:
Hand Screw
A
B
C
D
Available with
self-locking
device.
See page 109.
Hand Nut
Nut or Screw Type
Nut or Screw Type
Fig. III
Fig. IV
Nut or Screw Type
Nut or Screw Type
Fig. V
Fig. VI
Basic
Part
Number
101010
101012
101014
101016
101018
101020
101022
101024
101026
101028
101030
101032
101034
101036
101038
101040
101042
101044
101046
101048
101050
101052
101054
101056
101058
101060
101062
101064
101066
101068
101070
101072
101074
101076
101078
101080
101082
101084
101086
101088
101090
101092
101093
101094
101095
101096
101097
101098
Nuts
Screws
A
Tapped
Threaded
Head
B
C
Hole
Stud Size
Dia &
Size
& Length
Style
8-32
–
10-32
–
1/4-20
–
–
8-32x1/2
3/4
–
8-32x3/4
fig.
1/4 9/32
–
8-32x1
III
–
10-32x3/4
–
10-32x1
–
1/4-20x3/4
–
1/4-20x1
10-32
–
1/4-20
–
–
10-32x1/2
–
10-32x3/4
1
–
10-32x1
fig. 11/32 5/16
–
1/4-20x1/2
IV
–
1/4-20x3/4
–
1/4-20x1
–
1/4-20x1-1/2
10-32
–
1/4-20
–
5/16-18
–
3/8-16
–
–
1/4-20x1/2
–
1/4-20x3/4
–
1/4-20x1
1-3/8
–
1/4-20x1-1/2
fig. 13/32 3/8
–
5/16-18x3/4
V
–
5/16-18x1
–
5/16-18x1-1/2
–
5/16-18x2
–
3/8-16x1
–
3/8-16x1-1/2
–
3/8-16x2
1/4-20
–
5-16-18
–
3/8-16
–
–
1/4-20x1/2
–
1/4-20x3/4
–
1/4-20x1
1-7/8
1/2
1/2
–
1/4-20x1-1/2
fig.
–
5/16-18x3/4
VI
–
5/16-18x1
–
5/16-18x1-1/2
–
5/16-18x2
–
3/8-16x1
–
3/8-16x1-1/2
–
3/8-16x2
D
5/8
5/8
3/4
& BUSHINGS
Cadmium Plated, Steel Male Threads
NUTS
HAND SCREWS:
1
249
1-888-208-2008
NUTS & BUSHINGS
Fax (973) 244-9177
www.accuratescrew.com
BUSHINGS
B
A
D
E
C
Screw
Size
2
4
NUTS
6
& BUSHINGS
8
250
Color
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
Code
1
2
3
4
5
6
7
8
9
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
A
ID
± .005
B
Shank
OD ± .005
C
Flange
OD ± .005
.093
.093
.093
.093
.093
.116
.120
.125
.125
.125
.125
.125
.125
.125
.125
.140
.140
.141
.144
.147
.147
.157
.150
.156
.165
.170
.171
.174
.174
.174
.174
.174
.174
.178
.180
.180
.187
.187
.187
.190
.190
.125
.125
.125
.125
.125
.215
.310
.156
.156
.156
.531
.234
.234
.250
.312
.187
.359
.234
.211
.172
.172
.228
.250
.375
.250
.380
.242
.218
.218
.218
.218
.218
.218
.300
.292
.328
.296
.310
.312
.312
.343
.187
.187
.187
.187
.187
.312
.500
.250
.250
.250
.640
.375
.375
.562
.625
.375
.625
.375
.275
.312
.312
.290
.375
.625
.375
.450
.500
.375
.375
.375
.375
.375
.375
.500
.437
.500
.500
.500
.500
.687
.875
Ph
Phl
L
PA
PP
T
F
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
D
E
Shank Length Flange Thkns
± .005
± .005
.125
.187
.250
.312
.375
.168
.130
.125
.187
.250
.171
.109
.140
.250
.098
.063
.312
.087
.031
.125
.187
.148
.156
.187
.046
.155
.062
.187
.250
.312
.375
.437
.500
.750
.031
.218
.050
.168
.140
.212
.141
.062
.062
.062
.062
.062
.050
.057
.062
.062
.062
.109
.031
.031
.250
.037
.062
.031
.093
.140
.062
.062
.031
.062
.125
.062
.220
.093
.062
.062
.062
.062
.062
.062
.093
.065
.218
.070
.050
.100
.062
.140
ORDER EXAMPLE:
17200 - A - 1
Basic
Part Number
Material:
See chart
Finish:
See page 277
EXAMPLE FOR NYLON & DELRIN PARTS:
17200-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If any one dimension or tolerance change is required,
add to part number. EXAMPLE: 17200-A-1 (A=.080)
Basic
Part
Number
17200
17202
17204
17206
17208
17301
17303
17210
17212
17214
17305
17307
17309
17311
17313
17315
17317
17319
17321
17216
17218
17323
17325
17327
17329
17331
17333
17220
17222
17224
17226
17228
17230
17335
17337
17339
17341
17343
17345
17347
17349
Material
Finish
1-888-208-2008
NUTS & BUSHINGS
B
A
D
E
C
Color
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
Code
1
2
3
4
5
6
7
8
9
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
Screw
Size
A
ID
± .005
B
Shank
OD ± .005
C
Flange
OD ± .005
8
.190
.192
.195
.195
.196
.196
.196
.196
.197
.197
.200
.200
.200
.200
.200
.200
.200
.200
.201
.203
.203
.210
.218
.218
.219
.222
.234
.235
.237
.238
.240
.250
.250
.250
.250
.250
.250
.250
.252
.252
.253
.371
.375
.250
.300
.300
.300
.312
.343
.296
.681
.250
.250
.250
.250
.250
.250
.300
.312
.437
.312
.531
.343
.359
.359
.315
.697
.353
.355
.312
.375
.359
.296
.312
.359
.370
.375
.437
.500
.371
.375
.440
.578
.625
.550
.500
.583
.500
.500
.500
.500
.781
.437
.437
.437
.437
.437
.437
.562
.500
1.000
.437
.625
.625
.555
.484
.562
.750
.656
.650
.500
.500
.665
.395
.500
.500
.710
.500
1.000
1.000
.578
.500
.937
10
12
14
1/4
Ph
Phl
L
PA
PP
T
F
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
D
E
Shank Length Flange Thkns
± .005
± .005
.303
.377
.062
.406
.156
.375
.171
.406
.125
.125
.187
.250
.312
.375
.437
.500
.260
.187
.250
.038
.500
.140
.530
.172
.141
.250
.178
.171
.300
.125
.115
.178
.344
.093
.150
.375
.500
.093
.302
.250
.165
.038
.070
.031
.093
.125
.125
.046
.187
.125
.062
.062
.062
.062
.062
.062
.062
.120
.062
.187
.093
.125
.062
.103
.062
.078
.187
.103
.109
.062
.125
.109
.040
.156
.062
.053
.234
.250
.171
.038
.234
.125
ORDER EXAMPLE:
17351 - A - 1
Basic
Part Number
Material:
See chart
Finish:
See page 277
EXAMPLE FOR NYLON & DELRIN PARTS:
17351-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If any one dimension or tolerance change is required,
add to part number. EXAMPLE: 17351-A-1 (A=.080)
Basic
Part
Number
17351
17353
17355
17357
17359
17361
17363
17365
17367
17369
17232
17234
17236
17238
17240
17242
17371
17373
17375
17377
17379
17381
17383
17385
17387
17389
17391
17393
17395
17397
17399
17401
17403
17405
17407
17409
17411
17413
17415
17417
17419
Material
Finish
& BUSHINGS
BUSHINGS
NUTS
Fax (973) 244-9177
www.accuratescrew.com
251
1-888-208-2008
NUTS & BUSHINGS
Fax (973) 244-9177
www.accuratescrew.com
BUSHINGS
B
A
D
E
C
Screw
Size
NUTS
1/4
& BUSHINGS
5/16
252
Color
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
Code
1
2
3
4
5
6
7
8
9
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
A
ID
± .005
B
Shank
OD ± .005
C
Flange
OD ± .005
.255
.255
.255
.255
.255
.255
.255
.255
.256
.256
.258
.260
.260
.260
.260
.260
.260
.260
.260
.260
.260
.260
.263
.265
.265
.265
.266
.273
.280
.281
.281
.296
.310
.310
.310
.312
.312
.
312
.312
.315
.317
.311
.312
.320
.370
.375
.377
.386
.490
.375
.380
.317
.312
.312
.312
.312
.312
.312
.348
.363
.372
.443
.609
.375
.339
.375
.377
.359
.375
.615
.380
.500
.370
.370
.455
.355
.365
.412
.500
.800
.365
.500
.437
.625
.625
1.250
.635
.500
.718
.750
.750
.500
.562
.500
.500
.500
.500
.500
.500
.562
.500
.500
.562
.750
.500
.750
.625
.500
.625
.500
1.000
.500
.875
.609
.500
.560
.458
.615
.562
.796
.980
.562
1.281
Ph
Phl
L
PA
PP
T
F
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
D
E
Shank Length Flange Thkns
± .005
± .005
.072
.203
.109
.062
.212
.687
.140
.110
.682
.437
.313
.187
.250
.312
.375
.437
.500
.518
.438
.125
.250
.050
.375
.188
.140
.687
.171
.710
.625
.125
.500
.187
.225
.085
.288
.130
1.312
.782
1.375
.281
.125
.062
.031
.031
.062
.062
.062
.156
.090
.062
.062
.062
.062
.062
.062
.062
.062
.062
.031
.062
.125
.062
.125
.062
.062
.140
.062
.250
.040
.125
.125
.250
.109
.035
.060
.040
.035
.050
.218
.187
.062
.125
ORDER EXAMPLE:
17421 - A - 1
Basic
Part Number
Material:
See chart
Finish:
See page 277
EXAMPLE FOR NYLON & DELRIN PARTS:
17421-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If any one dimension or tolerance change is required,
add to part number. EXAMPLE: 17421-A-1 (A=.080)
Basic
Part
Number
17421
17423
17425
17427
17429
17431
17433
17435
17437
17439
17441
17244
17246
17248
17250
17252
17254
17443
17445
17447
17449
17451
17453
17455
17457
17459
17461
17463
17465
17467
17469
17471
17256
17258
17473
17475
17477
17479
17481
17483
17485
Material
Finish
1-888-208-2008
NUTS & BUSHINGS
B
A
D
E
C
Screw
Size
5/16
3/8
Color
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
Code
1
2
3
4
5
6
7
8
9
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
A
ID
± .005
B
Shank
OD ± .005
C
Flange
OD ± .005
.318
.318
.390
.320
.321
.323
.323
.325
.332
.332
.335
.337
.350
.365
.370
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.375
.380
.380
.380
.380
.380
.380
.437
.437
.320
.437
.470
.370
.370
.437
.443
.450
.617
.462
.375
.685
.906
.500
.430
.493
.490
.490
.430
.437
.468
.468
.496
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.500
.525
.560
.575
.625
.625
.625
.750
.625
.625
.437
.437
.625
.625
.750
.870
.625
.500
1.238
1.000
.555
.500
.755
.755
.995
.695
.625
.687
.687
.750
.625
.625
.625
.750
.750
.750
1.125
.745
.734
.734
.750
.625
.765
.750
.625
1.125
Ph
Phl
L
PA
PP
T
F
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
D
E
Shank Length Flange Thkns
± .005
± .005
.500
.503
.406
.250
.312
.062
.137
.531
.750
.125
.490
.562
.343
.185
.375
.100
.220
.030
1.010
.050
.375
.062
.093
.188
.242
.060
.133
.253
.156
.438
.190
.190
.750
.625
.625
.296
.515
1.218
.562
.250
.250
.062
.075
.125
.062
.062
.050
.050
.093
.093
.062
.130
.062
.265
.310
.062
.060
.030
.125
.130
.175
.062
.031
.078
.062
.070
.133
.060
.062
.312
.062
.065
.500
.062
.312
.312
.078
.031
.218
.250
.062
.125
ORDER EXAMPLE:
17487 - A - 1
Basic
Part Number
Material:
See chart
Finish:
See page 277
EXAMPLE FOR NYLON & DELRIN PARTS:
17487-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If any one dimension or tolerance change is required,
add to part number. EXAMPLE: 17487-A-1 (A=.080)
Basic
Part
Number
17487
17489
17491
17493
17495
17497
17499
17501
17503
17505
17260
17507
17509
17262
17511
17264
17266
17268
17270
17272
17513
17515
17517
17519
17521
17523
17525
17527
17529
17531
17533
17535
17537
17539
17541
17543
17545
17547
17549
17551
17553
Material
Finish
& BUSHINGS
BUSHINGS
NUTS
Fax (973) 244-9177
www.accuratescrew.com
253
1-888-208-2008
NUTS & BUSHINGS
Fax (973) 244-9177
www.accuratescrew.com
BUSHINGS
B
A
D
E
C
Screw
Size
3/8
NUTS
& BUSHINGS
7/16
1/2
254
Color
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
Code
1
2
3
4
5
6
7
8
9
Available Material (see page 275)
A
B
C
S
SS
N
D
Aluminum
Brass
Copper
Steel
Stainless Steel
Nylon
Delrin
A
ID
± .005
B
Shank
OD ± .005
C
Flange
OD ± .005
.382
.382
.385
.385
.385
.385
.390
.392
.400
.406
.415
.415
.420
.422
.430
.434
.442
.442
.447
.450
.453
.453
.470
.470
.470
.472
.484
.500
.500
.505
.505
.506
.508
.510
.515
.520
.522
.531
.565
.578
.593
.500
.531
.500
.505
.570
.625
.515
.510
.500
.690
.560
.625
.560
.750
.500
.747
.630
.630
.625
.625
.520
.627
.531
.531
.531
.575
.531
.620
.906
.690
.690
.628
.578
.625
.637
.625
.630
.747
.665
.687
.785
1.000
.656
.750
.625
.750
.750
.640
.637
.750
.750
.750
.703
.615
.984
.750
.993
1.275
1.250
.750
1.275
.625
.750
.937
.937
.937
.625
.625
.875
1.000
.810
.810
.750
.750
.875
.750
.796
.750
.993
.750
.921
.900
Ph
Phl
L
PA
PP
T
F
Phenolic (Paper)
Phenolic (Linen)
Polycarbonate(Lexan)
A.B.S.
P.V.C.
Teflon
Fiber
D
E
Shank Length Flange Thkns
± .005
± .005
.500
.671
.065
.562
.539
.500
.750
.309
.090
.312
.550
2.000
.315
.500
.036
.115
.750
1.250
.125
.740
.156
.500
.062
.190
.468
.257
.110
.190
.375
.370
.430
1.380
.343
.375
.187
.359
.187
.240
.647
.735
.375
.062
.109
.185
.187
.086
.093
.062
.062
.130
.125
.080
.062
.375
.125
.187
.135
.187
.437
.062
.125
.046
.093
.087
.084
.087
.062
.036
.065
.062
.130
.065
.060
.031
.125
.250
.062
.062
.135
.040
.046
.125
ORDER EXAMPLE:
17555 - A - 1
Basic
Part Number
Material:
See chart
Finish:
See page 277
EXAMPLE FOR NYLON & DELRIN PARTS:
17555-N-2
BLACK
Choose color from chart, otherwise Natural is provided.
If any one dimension or tolerance change is required,
add to part number. EXAMPLE: 17555-A-1 (A=.080)
Basic
Part
Number
17555
17557
17274
17559
17561
17563
17565
17567
17276
17569
17278
17571
17280
17573
17282
17575
17577
17579
17581
17583
17585
17587
17589
17591
17593
17595
17597
17284
17599
17286
17288
17601
17603
17605
17607
17609
17611
17613
17615
17617
17619
Material
Finish
1-888-208-2008
MISC. COMPONENTS
Fax (973) 244-9177
www.accuratescrew.com
THREADED STUD
THREADED STUD
Screw driver slot available
(see order example)
Screw driver slot available
(see order example)
L
L
Class 1A Rolled Thread
Class 1A Rolled Thread
18/8 Stainless Steel
Tolerance on Length - In.
For Lengths
For Lengths
6 In. and
Over 6 In.
Shorter
To 5/16
Over 5/16 to 3/4
Over 3/4 to 1-1/4
Over 1-1/4
Thread
Size
Basic Part
Number
4-40
6-32
8-32
10-24
10-32
12-24
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
1/2-13
1/2-20
9/16-12
5/8-11
3/4-10
7/8-9
1-8
1-1/8-7
1-1/4-7
900560
900562
900564
900566
900568
900570
900572
900574
900576
900578
900580
900582
900584
900586
900588
900590
900592
900594
900596
900598
900600
900602
±0.03
±0.06
±0.12
±0.25
±0.06
±0.12
±0.19
±0.25
L Length
(1/2 minimum)
Finish
To 5/16
Over 5/16 to 3/4
Over 3/4 to 1-1/4
Over 1-1/4
Thread Size
Basic Part
Number
1/4-20
5/16-18
3/8-16
1/2-13
5/8-11
3/4-10
7/8-9
1-8
900604
900606
900608
900610
900612
900614
900616
900618
±0.03
±0.06
±0.12
±0.25
L Length
(1/2 minimum)
±0.06
±0.12
±0.19
±0.25
Finish
ORDER EXAMPLE:
900604 - .500 - 12
Basic Part Number
Length:
Fill in your length
Finish:
See page 277
Screw Driver Slot is a vailable (.060 X .060), one end only, 8-32 thread and larger,
add SDS to part number. EXAMPLE: 900604-.500-SDS-12
Self-Locking Device is available (one sided only), add SLD (Pellet Type) or
SLDS (Strip Type) to part number.
EXAMPLE: 900604-.500-SLD or SLDS-12
ORDER EXAMPLE:
900560 - .500 - 12
Basic Part Number
Tolerance on Length - In.
For Lengths
For Lengths
6 In. and
Over 6 In.
Shorter
Nom. Std.
Size
In.
Length:
Fill in your length
MISC. COMPONENTS
Nom. Std.
Size
In.
316 Stainless Steel
Finish:
See page 277
Screw Driver Slot is a vailable (.060 X .060), one end only, 8-32 thread and larger,
add SDS to part number. EXAMPLE: 900560-.500-SDS-12
Self-Locking Device is available (one sided only), add SLD (Pellet Type) or
SLDS (Strip Type) to part number.
EXAMPLE: 900560-.500-SLD or SLDS-12
255
1-888-208-2008
MISC. COMPONENTS
Fax (973) 244-9177
www.accuratescrew.com
THREADED STUD
Low Carbon Steel (1008-1020)
Screw driver slot available
(see order example)
L
Class 1A Rolled Thread
MISC. COMPONENTS
256
Thread Size
Basic Part
Number
6-32
8-32
10-24
10-32
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
9/16-12
9/16-18
5/8-11
5/8-18
3/4-10
3/4-16
7/8-9
7/8-14
1-8
1-14
1-1/8-7
1-1/4-7
1-3/8-6
1-1/2-6
1-3/4-5
2-4-1/2
900620
900622
900624
900626
900628
900630
900632
900634
900636
900638
900640
900642
900644
900646
900648
900650
900652
900654
900656
900658
900660
900662
900664
900666
900668
900670
900672
900674
900676
900678
L Length
(1/2 minimum)
Finish
Tolerance on Length - In.
For Lengths
For Lengths
6 In. and
Over 6 In.
Shorter
Nom. Std.
Size
In.
To 5/16
Over 5/16 to 3/4
Over 3/4 to 1-1/4
Over 1-1/4
±0.03
±0.06
±0.12
±0.25
±0.06
±0.12
±0.19
±0.25
ORDER EXAMPLE:
900620 - .500 - 7
Basic Part Number
Length:
Fill in your length
Finish:
See page 277
Screw Driver Slot is a vailable (.060 X .060), one end only, 8-32 thread and larger,
add SDS to part number. EXAMPLE: 900620-.500-SDS-7
Self-Locking Device is available (one sided only), add SLD (Pellet Type) or
SLDS (Strip Type) to part number.
EXAMPLE: 900620-.500-SLD or SLDS-7
!
TECH
TIP
You can view or print our
ISO certification at
www.accuratescrew.com
1-888-208-2008
MISC. COMPONENTS
THREADED STUD
THREADED STUD
Alloy Steel (4140)
Nylon
Screw driver slot available
(see order example)
Screw driver slot available
(see order example)
L
L
Color
Class 1A Rolled Thread
Thread Size
Basic Part
Number
1/4-20
5/16-18
3/8-16
1/2-13
5/8-11
3/4-10
7/8-9
1-8
1-1/8-8
1-1/4-8
1-3/8-8
1-1/2-8
1-3/4-8
2-8
900680
900682
900684
900686
900688
900690
900692
900694
900696
900698
900700
900702
900704
900706
Nom. Std.
Size
In.
To 5/16
Over 5/16 to 3/4
Over 3/4 to 1-1/4
Over 1-1/4
L Length
(1/2 minimum)
Class 1A Rolled Thread
Finish
Basic Part
Number
4-40
6-32
8-32
10-24
10-32
1/4-20
5/16-18
3/8-16
1/2-13
900708
900710
900712
900714
900716
900718
900720
900722
900724
Nom. Std.
Size
In.
Tolerance on Length - In.
For Lengths
For Lengths
6 In. and
Over 6 In.
Shorter
±0.03
±0.06
±0.12
±0.25
±0.06
±0.12
±0.19
±0.25
ORDER EXAMPLE:
900680 - .500 - 7
Basic Part Number
Thread Size
Length:
Fill in your length
Finish:
See page 277
Screw Driver Slot is a vailable (.060 X .060), one end only, 8-32 thread and larger,
add SDS to part number. EXAMPLE: 900680-.500-SDS-7
Self-Locking Device is available (one sided only), add SLD (Pellet Type) or
SLDS (Strip Type) to part number.
EXAMPLE: 900680-.500-SLD or SLDS-7
To 5/16
Over 5/16 to 3/4
Over 3/4 to 1-1/4
Over 1-1/4
L Length
(1/2 minimum)
Code
Natural
Black
Red
Blue
Purple
Brown
Orange
Green
Yellow
1
2
3
4
5
6
7
8
9
Finish
Tolerance on Length - In.
For Lengths
For Lengths
6 In. and
Over 6 In.
Shorter
±0.03
±0.06
±0.12
±0.25
±0.06
±0.12
±0.19
±0.25
ORDER EXAMPLE:
900708 - .500 - 1
Basic Part Number
Length:
Fill in your length
Color:
See chart
Screw Driver Slot is a vailable (.060 X .060), one end only, 8-32 thread and larger,
add SDS to part number. EXAMPLE: 900708-.500-SDS-1
Self-Locking Device is available (one sided only), add SLD (Pellet Type) or
SLDS (Strip Type) to part number.
EXAMPLE: 900708-.500-SLD or SLDS-1
Choose color from chart, otherwise Natural is provided.
EXAMPLE PART NUMBER FOR NYLON: 900708-.500-2
Black
MISC. COMPONENTS
Fax (973) 244-9177
www.accuratescrew.com
257
1-888-208-2008
MISC. COMPONENTS
Fax (973) 244-9177
www.accuratescrew.com
THREADED STUD
Aluminum (2011)
Screw driver slot available
(see order example)
L
Class 1A Rolled Thread
Thread
Size
6-32
8-32
10-24
10-32
1/4-20
5/16-18
3/8-16
1/2-13
L Length
Basic Part
Number (1/2 minimum)
Tolerance on Length - In.
For Lengths
For Lengths
6 In. and
Over 6 In.
Shorter
Nom. Std.
Size
In.
Finish
To 5/16
Over 5/16 to 3/4
Over 3/4 to 1-1/4
Over 1-1/4
±0.03
±0.06
±0.12
±0.25
±0.06
±0.12
±0.19
±0.25
ORDER EXAMPLE:
900500 - .500 - 22
900500
900502
900504
900506
900508
900510
900512
900514
Basic Part Number
Length:
Fill in your length
Finish:
See page 277
Screw Driver Slot is a vailable (.060 X .060), one end only, 8-32 thread and larger,
add SDS to part number. EXAMPLE: 900500-.500-SDS-22
Self-Locking Device is available (one sided only), add SLD (Pellet Type) or
SLDS (Strip Type) to part number.
EXAMPLE: 900500-.500-SLD or SLDS-22
THREADED STUD
Brass (CDA360)
Screw driver slot available
(see order example)
Thread
Size
MISC. COMPONENTS
258
4-40
6-32
8-32
10-24
10-32
12-24
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
1/2-13
1/2-20
5/8-11
5/8-18
3/4-10
7/8-9
1-8
L Length
Basic Part
Number (1/2 minimum)
900518
900520
900522
900524
900526
900528
900530
900532
900534
900536
900538
900540
900542
900544
900546
900548
900550
900552
900554
900556
L
Finish
Class 1A Rolled Thread
Nom. Std.
Size
In.
To 5/16
Over 5/16 to 3/4
Over 3/4 to 1-1/4
Over 1-1/4
Tolerance on Length - In.
For Lengths
For Lengths
6 In. and
Over 6 In.
Shorter
±0.03
±0.06
±0.12
±0.25
±0.06
±0.12
±0.19
±0.25
ORDER EXAMPLE:
900518 - .500 - 7
Basic Part Number
Length:
Fill in your length
Finish:
See page 277
Screw Driver Slot is a vailable (.060 X .060), one end only, 8-32 thread and larger,
add SDS to part number. EXAMPLE: 900518-.500-SDS-7
Self-Locking Device is available (one sided only), add SLD (Pellet Type) or
SLDS (Strip Type) to part number.
EXAMPLE: 900518-.500-SLD or SLDS-7
1-888-208-2008
MISC. COMPONENTS
Fax (973) 244-9177
www.accuratescrew.com
CHASSIS FASTENERS
1/4" - SQUARE
4-40
Thread
Drill .098
.063 Deep
.125 ± .003
.075
.105
.135
.165
.230
.290
1/4"
X ± .003
.125
Recommended
Shank Length
1/4"
.125
.250
X = Length of Shank
Available Material (see page 275)
ORDER EXAMPLE:
1700 - B - .105 - 7
Basic
Part Number
Length
.250
Material:
See chart
Shank Length:
Fill in your length
Basic Part Number
1700
A
B
S
SS
Finish:
See page 277
Material
Aluminum
Brass
Steel
Stainless Steel
Shank Length
Finish
5/16" - SQUARE
Drill 5/32" (.156)
.093 Deep
6-32
Thread*
.187 ± .002
.075
.105
.135
.165
.230
.290
5/16"
X ± .003
.218
Recommended
Shank Length
5/16"
.156
.375
X = Leng h of Shank
Basic
Part Number
Material:
See chart
Shank Length:
Fill in your length
Finish:
See page 277
*4-40 thread is available on special order , add 4-40 to the part
number. EXAMPLE: 1800-B-.075-7 (4-40)
Length
.375
Basic Part Number
1800
NOTE: Standard materials. Other materials on special order .
Material
Available Material (see page 275)
A
Aluminum
B
Brass
S
Steel
SS
Shank Length
Stainless Steel
Finish
MISC. COMPONENTS
ORDER EXAMPLE:
1800 - B - .105 - 7
259
1-888-208-2008
HANDLES
Fax (973) 244-9177
www.accuratescrew.com
ROUND HANDLES
ORDER EXAMPLE:
8400 - 1.500 - 256 - SS - 12
Length A
between
centers
Basic
Part
Number
Thread
Material:
See chart
Thread
Finish:
See page
277
If metric thread is required, add to part number .
EXAMPLE: 8400-1.500-M2-SS-12
If a different thread depth B is required, add requirement to part number .
EXAMPLE: 8400-1.500-256-SS-12 (B = 256 x 3/8)
Diameter
1/8
5/32
3/16
Height
1/2
3/4
1
1-1/4
1-1/2
2
3/4
1
1-1/4
1-1/2
2
3/4
7/8
1
1-1/8
Approx
Radius
1/8
5/32
3/16
Basic
Part Number
Length A
±1/32
Thread
B Min. Depth of Thread
2-56
4-40
3/16
1/4
Available Material (see page 275)
A
B
C
S
SS
Aluminum
Brass
Copper
Steel 12L14
Stainless Steel, Type 303
Material
Finish
8400
8402
8404
8406
8408
8410
8412
8100
8416
8418
8420
8424
8426
8428
8430
FIRM GRIP MOLDED PLASTIC COATING
HANDLES
OTHER COLORS
Black
Blue
Red
Green
White
Yellow
Clear
Orange
Brown
Purple
BL
B
R
G
(6 Weeks Delivery)
W
Y
C
O
BR
P
ORDER EXAMPLE:
8400 - 4.00 - 256 - A - 1 - FG - BL
Basic
Part
Number
260
Recommended
Colors
Length A
between
centers
Thread
Material:
See chart
Finish:
See page
277
Firm Grip:
See note below
Color:
See chart
!
TECH
TIP
Firm grip handles
available in ten
different colors.
NOTE: Where “H” dimension is 1" or smaller , thread will be minimum depth possible or minimum of 3 full threads.
1-888-208-2008
HANDLES
Fax (973) 244-9177
www.accuratescrew.com
ROUND HANDLES
ORDER EXAMPLE:
8432 - 1.500 - 632 - SS - 12
Length A
between
centers
Basic
Part
Number
Thread
Material:
See chart
Finish:
See page
277
If metric thread is required, add to part number .
EXAMPLE: 8432-1.500-M3-SS-12
If a different thread depth B is required, add requirement to part number .
EXAMPLE: 8432-1.500-6-32-SS-12 (B = 6-32 x 3/8)
Diameter
3/16
1/4
5/16
Height
1-1/4
1-1/2
2
1
1-1/4
1-1/2
2
2-1/2
2-3/4
3
3-1/2
4
4-1/4
1
Approx
Radius
Basic
Part Number
Length A
±1/32
Thread
B Min. Depth of Thread
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
1/4-28
3/16
1/4
9/32
5/16
3/8
3/8
9/16
9/16
Available Material (see page 275)
A
B
C
S
SS
Thread
Aluminum
Brass
Copper
Steel 12L14
Stainless Steel, Type 303
Material
Finish
8432
8434
8436
8103
8104
8105
8106
8107
8108
8438
8440
8442
8444
8110
3/16
1/4
5/16
Recommended
Colors
OTHER COLORS
Black
Blue
Red
Green
White
Yellow
Clear
Orange
Brown
Purple
BL
B
R
G
(6 Weeks Delivery)
W
Y
C
O
BR
P
ORDER EXAMPLE:
8432 - 4.00 - 256 - A - 1 - FG - BL
Basic
Part
Number
Length A
between
centers
Thread
Material:
See chart
Finish:
See page
277
Firm Grip:
See note below
Color:
See chart
NOTE: Where “H” dimension is 1 or smaller , thread will be minimum dep h possible or minimum of 3 full threads.
!
TECH
TIP
ASM can supply
the hardware
for all of our
handles.
HANDLES
FIRM GRIP MOLDED PLASTIC COATING
261
1-888-208-2008
HANDLES
Fax (973) 244-9177
www.accuratescrew.com
ROUND HANDLES
ORDER EXAMPLE:
8113 - 1.500 - 256 - SS - 12
Length A
between
centers
Basic
Part
Number
Thread
Material:
See chart
Thread
B Min. Depth of Thread
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
1/4-28
3/16
1/4
9/32
5/16
3/8
3/8
9/16
9/16
Available Material (see page 275)
Finish:
See page
277
A
B
C
S
SS
If metric thread is required, add to part number .
EXAMPLE: 8113-1.500-M3-SS-12
If a different thread depth B is required, add requirement to part number .
EXAMPLE: 8113-1.500-632-SS-12 (B =632 x 3/8)
Diameter
5/16
3/8
Approx
Radius
Height
1-1/4
1-5/16
1-3/8
1-1/2
1-3/4
1-7/8
2
2-1/4
3
3-1/2
4
5
1-9/32
1-5/16
1-1/2
1-3/4
Basic
Part Number
Length A
±1/32
Aluminum
Brass
Copper
Steel 12L14
Stainless Steel, Type 303
Thread
Material
Finish
8113
8109
8114
8112
8115
8118
8116
8117
8122
8119
8120
8446
8121
8124
8127
8130
5/16
3/8
FIRM GRIP MOLDED PLASTIC COATING
HANDLES
OTHER COLORS
Black
Blue
Red
Green
White
Yellow
Clear
Orange
Brown
Purple
BL
B
R
G
(6 Weeks Delivery)
W
Y
C
O
BR
P
ORDER EXAMPLE:
8113 - 4.00 - 256 - A - 1 - FG - BL
Basic
Part
Number
262
Recommended
Colors
Length A
between
centers
Thread
Material:
See chart
Finish:
See page
277
Firm Grip:
See note below
Color:
See chart
NOTE: Where “H” dimension is 1 or smaller , thread will be minimum depth possible or minimum of 3 full threads.
1-888-208-2008
HANDLES
Fax (973) 244-9177
www.accuratescrew.com
ROUND HANDLES
ORDER EXAMPLE:
8133 - 1.500 - 632 - SS - 12
Length A
between
centers
Basic
Part
Number
Thread
Material:
See chart
3/8
1/2
Approx
Radius
1-7/8
2
2-3/8
2-1/2
3
4
1-5/8
1-3/4
1-7/8
2
2-3/8
2-1/2
3
4
5
3/8
1/2
Basic
Part Number
Length A
±1/32
2-56
4-40
6-32
8-32
10-24
10-32
1/4-20
1/4-28
5/16-18
3/16
1/4
9/32
5/16
3/8
3/8
9/16
9/16
9/16
A
B
C
S
SS
If a different thread depth B is required, add requirement to part number .
EXAMPLE: 8133-1.500-632-SS-12 (B = 6-32 x 3/8)
Height
B Min. Depth of Thread
Available Material (see page 275)
Finish:
See page
277
If metric thread is required, add to part number .
EXAMPLE: 8133-1.500-M3-SS-12
Diameter
Thread
Aluminum
Brass
Copper
Steel 12L14
Stainless Steel, Type 303
Thread
Material
Finish
8133
8123
8125
8139
8126
8128
8132
8134
8135
8136
8137
8140
8138
8142
8141
FIRM GRIP MOLDED PLASTIC COATING
Recommended
Colors
OTHER COLORS
Black
Blue
Red
Green
White
Yellow
Clear
Orange
Brown
Purple
(6 Weeks Delivery)
W
Y
C
O
BR
P
ORDER EXAMPLE:
8133 - 4.00 - 256 - A - 1 - FG - BL
Basic
Part
Number
Length A
between
centers
Thread
Material:
See chart
Finish:
See page
277
Firm Grip:
See note below
NOTE: Where “H” dimension is 1 or smaller , thread will be minimum dep h possible or minimum of 3 full threads.
HANDLES
BL
B
R
G
Color:
See chart
263
1-888-208-2008
HANDLES
Fax (973) 244-9177
www.accuratescrew.com
OVAL HANDLES
Recommended
Length A ±1/32
Length A
between
centers
Thread
Material:
See chart
A
SS
Finish:
See page
277
If metric thread is required, add to part number .
EXAMPLE: 9300-1.500-M3-SS-12
If a different thread depth B is required, add requirement to part number .
EXAMPLE: 9300-1.500-632-SS-12 (B = 6-32 x 3/8)
Oval
7/16 x 9/32
5/8 x 9/32
Height
Basic
Part
Number
1
1-9/32
1-1/2
1-3/4
2
1
1-9/32
1-1/2
1-3/4
2
2-1/4
2-1/2
3
4
9300
9302
9304
9306
9308
9310
9312
9314
9316
9318
9320
9322
9324
9326
See chart for
recommended
Length A ± 1/32
4.562
2.250
5.000
2.500
6.000
3.000
6.437
3.500
7.000
4.000
8.000
4.250
9.000
4.500
12.000
Available Material (see page 275)
ORDER EXAMPLE:
9300 - 2.00 -10-32 - SS - 12
Basic
Part
Number
2.000
Thread
Aluminum
Stainless Steel
Thread
B Min. Depth of Thread
2-56
4-40
6-32
8-32
10-32
3/16
1/4
9/32
5/16
3/8
Material
Finish
HANDLES
264
NOTE: Where H dimension is 1" or smaller , thread will be maximum depth possible or minimum of 3 full threads.
1-888-208-2008
HANDLES
Fax (973) 244-9177
www.accuratescrew.com
RECTANGLE HANDLES
Recommended
Length “A” ±1/32
2.000
3.000
4.000
5.000
6.000
7.000
8.000
9.000
10.000
Available Material (see page 275)
ORDER EXAMPLE:
9400 - 2.00 - 440 - B - 7
Basic
Part
Number
Length A
between
centers
Thread
Material:
See chart
Finish:
See page
277
If metric thread is required, add to part number .
EXAMPLE: 9400-1.500-M3-SS-12
If a different thread depth B is required, add requirement to part number .
EXAMPLE: 9400-1.500-632-SS-12 (B = 6-32 x 3/8)
Rectangle
1/2 x 3/16
1/2 x 1/4
1/2 x 5/16
5/8 x 1/4
Height
Basic
Part
Number
1-1/2
1-3/4
2
1-1/2
1-3/4
2
1-1/2
1-3/4
2
1
1-1/2
1-3/4
2
9400
9402
9405
Δ 9407
Δ 9409
Δ 9411
Δ 9413
Δ 9415
Δ 9416
Δ 9418
Δ 9423
Δ 9425
Δ 9426
See above for
Recommended
Length “A” ±1/32
Thread
A
B
S
SS
Aluminum
Brass
Steel
Stainless Steel
Thread
B Min. Depth of Thread
2-56
4-40
6-32
8-32
10-32
3/16
1/4
9/32
5/16
3/8
Material
Finish
HANDLES
Δ Not available in Brass
NOTE: Where H dimension is 1" or smaller , thread will be maximum depth possible or minimum of 3 full threads.
265
1-888-208-2008
HANDLES
Fax (973) 244-9177
www.accuratescrew.com
SIDE MOUNTED ROUND HANDLE
ORDER EXAMPLE:
114032 - 1.000 - A - 22
Length A
between
centers
Basic
Part
Number
Material:
See chart
Available Material (see page 275)
Finish:
See page
277
A
B
S
SS
Any one dimension or tolerance may be changed by adding to part number .
EXAMPLE: 114032-1.000-A-22MOD (X=.625)
Basic
D
Part
Diameter
Number
114032
114034
114036
114038
114040
114042
114044
114046
114048
HANDLES
266
Radius
5/16
5/16
3/8
3/8
1/2
3/8
!
H
+ .020
- .040
H1
± .020
2.56
3.06
3.56
2.56
3.06
3.56
2.56
3.06
3.56
1.40
1.90
2.40
1.40
1.90
2.40
1.40
1.90
2.40
F
± .005
.204
Aluminum
Brass
Steel
Stainless Steel
G
± .010
C
± .010
.156
.219
.187
.282
.250
.407
TECH TIP
X
± .010
A
± .010
Material
.41
Not sure whether the part you selected will fit in your
application? Download a 3D CAD model of the part (in
the format of your choice) fr om www.accuratescrew.com
and find out!
Finish
1-888-208-2008
HANDLES
Fax (973) 244-9177
www.accuratescrew.com
OFFSET INTERNAL THREAD HANDLES
See pages 260-263 for complete information.
3/16 Round
9/16
±3/32
A
5/16
±1/16
1/4 Round
5/16 Round
ORDER EXAMPLE:
8428 - 2.00 - 440 - SS - F - 1
Basic
Part
Number
NOTE: H-length minimum of 1.00
Length A
between
centers
Thread
Material:
See chart
Offset
Finish:
See page
277
HANDLES
3/8 Round
267
1-888-208-2008
HANDLES
Fax (973) 244-9177
www.accuratescrew.com
ROUND EXTERNAL THREADED HANDLES
Threaded ferrule and nut supplied with above handles.
Available Material (see page 275)
A
B
C
S
SS
Aluminum
Brass
Copper
Steel
Stainless Steel
ORDER EXAMPLE:
9100 - 3.000 - SS - 12
Basic
Part
Number
Fill in
required length
Material:
See chart
Finish:
See page
277
L = min. 2.00
HANDLES
268
!
TECH TIP
We can bend our handles
up to 1/2" OD.
1-888-208-2008
HANDLES
Fax (973) 244-9177
www.accuratescrew.com
ROUND EXTERNAL THREADED HANDLES
WITH SHOULDERS
Available Material (see page 275)
A
B
C
S
SS
Dia.
Aluminum
Brass
Copper
Steel
Stainless Steel
Recommended Thread
3/16
4-40 or 6-32
1/4
8-32 or 10-32
5/16
10-32 or 1/4-20
3/8
10-32, 1/4-20, or
5/16-18
1/2
10-32, 1/4-20, 5/16-18
or 3/8-24
Part No.
9200
9202
9204
9206
9208
9210
9212
9214
9216
9218
9220
9222
9224
9226
9228
9230
Diameter
3/16
1/4
5/16
3/8
1/2
ORDER EXAMPLE:
9200 - 2.00 - 440 - SS - 12
Basic
Part
Number
Height
1
1-1/2
2
1
1-1/2
2
1-13/16
2
2-1/4
2
2-1/2
3
2-1/2
3
3-1/2
4
Approx.
Radius
Length “A”
minimum
center-to-center
“L” 2.00
Length A
± .015
Thread
Thread
Material:
See chart
Material
Finish:
See page
277
Finish
3/16
1/4
5/16
3/8
1/2
*Minimum center-to-center “L” 2.00
HANDLES
Nuts and washers not supplied.
269
1-888-208-2008
HANDLES
Fax (973) 244-9177
www.accuratescrew.com
FERRULES
For 5/32" Diameter Handles
For 3/16" Diameter Handles
For 1/4" Diameter Handles
For 2-56 Thread
Part Number 8200
For 4-40 Thread
Part Number 8201
For 10-32 Thread
Part Number 8204
For 3/8" Diameter Handles
For 5/16" Diameter Handles
For 8-32 Thread
Part Number 8202
For 1/4-20 Thread
Part Number 8202A
For 10-32 Thread
Part Number 8208
For 1/4-20 Thread
Part Number 8208A
For 10-32 Thread
Part Number 8206
For 1/4-20 Thread
Part Number 8206A
For 5/16-18 Thread
Part Number 8206B
For 10-32 Thread
Part Number 8210
For 1/2" Diameter Handles
For 1/4-20 Thread
Part Number 8209
HANDLES
ORDER EXAMPLE:
8200 - SS - 12
Basic
Part
Number
270
For 3/8-24 Thread
Part Number 8209A
Material:
See chart
Finish:
See page
277
For 5/16-18 Thread
Part Number 8209B
Available Material (see page 275)
A
Aluminum
B
Brass
C
Copper
SS
Stainless Steel
For 10-32 Thread
Part Number 8209C
1-888-208-2008
HANDLES
Fax (973) 244-9177
www.accuratescrew.com
FOLDING HANDLES
Available Material (see page 275)
A
Aluminum
B
Brass*
C
Copper*
S
Steel*
SS
Indicate 90° or 180° in Part Number
90° Folding (Two Position)
180° Folding (Three Position)
Stainless Steel
*Round only
Part Number 9500
ORDER EXAMPLE:
9500 - 90º - SS - 12
Basic
Part
Number
90º Folding
2-position
Material:
See chart
Finish:
See page
277
Part Number 9504
ORDER EXAMPLE:
9504 - 180º - SS - 12
Basic
Part
Number
180º Folding
3-position
Material:
See chart
Finish:
See page
277
Part Number 9506
ORDER EXAMPLE:
9506 - 90º - SS - 12
Basic
Part
Number
90º Folding
2-position
Material:
See chart
Finish:
See page
277
ORDER EXAMPLE:
9501 - 180º - SS - 12
Basic
Part
Number
180º Folding
3-position
Material:
See chart
Finish:
See page
277
HANDLES
Part Number 9501
271
1-888-208-2008
HANDLES
Fax (973) 244-9177
www.accuratescrew.com
FOLDING - EXTERNAL THREAD ROUND
90° 2-Position Spring Loaded Detents
Available Material (see page 275)
A
Aluminum
B
Brass
C
Copper
S
Steel
SS
Diameter
1/4 OD
5/16 OD
3/8 OD
ORDER EXAMPLE:
16684 - 3.000 - A - 3
Basic
Part
Number
A
Center-to-Center
Material:
See chart
Finish:
See page
277
Basic
Part
Number
16684
16686
16688
16690
16692
16694
16696
Diameter
1/4
5/16
3/8
Available
Thread
1/4-28
5/16-24
3/8-24
Stainless Steel
L
C
B
9/16
5/8
5/8
5/16
3/8
1/2
7/16
9/16
5/8
Material
Finish
A
H
Height
See Note
Below
1.460
1.530
1.850
1.530
1.625
1.850
2.375
180° 3-Position Spring Loaded Detents
Available Material (see page 275)
A
B
SS
Diameter
1/4 OD
5/16 OD
3/8 OD
ORDER EXAMPLE:
16698 - 3.000 - A - 3
HANDLES
272
Basic
Part
Number
A
Center-to-Center
Material:
See chart
Finish:
See page
277
Basic
Part
Number
16698
16700
16702
16704
16706
16708
16710
Diameter
1/4
5/16
3/8
Available
Thread
1/4-28
5/16-24
3/8-24
H
Height
Aluminum
Brass
Stainless Steel
L
C
B
9/16
5/8
5/8
5/16
3/8
1/2
7/16
9/16
5/8
A See
Note
Below
Material
Finish
1.460
1.530
1.850
1.530
1.625
1.850
2.375
NOTES: Nuts and washers are included.
The “A” center-to-center dimension must be 2.500
1-888-208-2008
HANDLES
Fax (973) 244-9177
www.accuratescrew.com
FOLDING - EXTERNAL THREAD OVAL
90° 2-Position Spring Loaded Detents
Available Material (see page 275)
A
SS
Aluminum
Stainless Steel
Oval Size
7/16 x 9/32
5/8 x9/32
Available
Thread
5/16-24
3/8-24
L
C
B
9/16 7/16
5/8 3/4 5/8
ORDER EXAMPLE:
16712 - 3.000 - A - 3
A
Center-to-Center
Basic
Part
Number
Material:
See chart
Finish:
See page
277
Basic
Part
Number
16712
16714
16716
16718
16728
16730
16732
16734
Size
7/16 x 9/32
5/8 x 9/32
H
Height
A
See Note
Below
Material
Finish
Material
Finish
1.695
1.791
1.843
2.125
1.695
1.791
1.843
2.125
180° 3-Position Spring Loaded Detents
Available Material (see page 275)
Aluminum
Stainless Steel
Oval Size
7/16 x 9/32
5/8 x9/32
Available
Thread
5/16-24
3/8-24
L
C
B
9/16 7/16
5/8
3/4 5/8
ORDER EXAMPLE:
16736 - 3.000 - A - 3
Basic
Part
Number
A
Center-to-Center
Material:
See chart
NOTE: Nuts and washers are included.
The “A” center-to-center dimension must be 2.500
Finish:
See page
277
Basic
Part
Number
16736
16738
16740
16742
16752
16754
16756
16758
Size
7/16 x 9/32
5/8 x 9/32
H
Height
1.695
1.791
1.843
2.125
1.695
1.791
1.843
2.125
A
See Note
Below
HANDLES
A
SS
273
1-888-208-2008
HANDLES
Fax (973) 244-9177
www.accuratescrew.com
FOLDING - INTERNAL THREAD OVAL
180° Infinite Position
Available Material (see page 275)
Oval Size
7/16 X 9/32
5/8 X9/32
Available
Thread
8-32
10-32
B
C
A
SS
D
7/16 7/8 21/32
5/8 1-1/16 3/4
ORDER EXAMPLE:
16768 - 3.000 - A - 3
Basic
Part
Number
A
Center-to-Center*
Material:
See chart
Finish:
See page
277
Basic
Part
Number
16768
16770
16772
16780
16782
16784
Oval Size
7/16 X 9/32
5/8 X 9/32
H
Height
Aluminum
Stainless Steel
Basic
Part
Number
Size
H
Height
2.000
2.500
3.000
2.000
2.500
3.000
*NOTE: The “A” center-to-center dimension must be 2.500
FOLDING - WITH MOUNTING PLATE
Rectangular 180° Free Fall
Available Material (see page 275)
Aluminum Alloy
HANDLES
274
ORDER EXAMPLE:
16792
Basic
Part
Number
Basic Part
Number
16792
16794
16796
16798
Mounting
Plate
With Holes
Without Holes
for Spot Welding
Handle
Finish
Black Epoxy
Gray Epoxy
Black Epoxy
Gray Epoxy
Plate
Finish
Black Anodized
Clear Anodized
Black Anodized
Clear Anodized
1-888-208-2008
Fax (973) 244-9177
www.accuratescrew.com
MATERIAL SPECIFICATIONS
Machined Products
Material Specifications For
Machined Products
Aluminum**
A
Brass
B
Copper
C
Delrin
D
Fiber
F
Glass Epoxy
GE
Nylon*
N
2011i-T3 AMS QQ-A225/3, 2024-T351
AMS-QQA-225/6A & ASTM B211-03,
6061-T6 QQA225 8E, 6063-T52 QQA225-8E
ASTM B16-92, Alloy-C36000 temper - HO2 - half hard
QQ-B-626D-Alloy 360, temper - half hard
ASTM-B-301-96, Alloy-C14500 temper-HO2-half hard
(Tellurium); ASTM B103 & ASTM B139 Alloy-C54400
(Phos. Bronze)
ASTM-D-4181-97, natural, long term service,
temperature 200°F UL - 94 HB, virgin grade
ASTM-D-710-97 UL97HB maximum ser vice
temperature 230° F
MIL-1-24768/27-(GEE-F) 25 Feb. 92.
G10 UL 94 V-0
LP-410-natural 6/6, ASTM-D-4066-96A natural,
service virgin grade temperature 210°F UL 94HB,
Polyamides (nylon)
MIL-I-24768/11-92 PBG-P and NEMA grade XX, paper
service temperature 266°F, UL 94 rating of HB
MIL-I-24768/13-92 FBE and NEMA grade LE, linen
service temperature 257°F, UL 94 rating of HB
Phenolic - Paper
PH
Phenolic - Linen
PHL
Material
Code
A.B.S.
PA
Lexan
L
P.V.C.
PP
Rulon
AR
Stainless Steel+
SS
Steel
S
Teflon
T
ULTEM 1,000
Polyethermide***
UL
Material Specifications For
Machined Products
A.B.S. ASTM-D-4673-96-natural, service temperature
160°F UL-94 HB
Polycarbonate (Lexan) ASTM-D-3935-94-PC, 110
B34720. Continuous usage temperature 250°F U-94 V-2
P.V.C. round only L.P. 1036 service temperature 140°F
UL-94 VO Tolerances: 1/2 diameter and under +.010,
-.000 over 1/2 diameter + .020, -.000
Operating temperature range -400° to 550°F standard
grade color - maroon, non-flammable UL -94 V0
ASTM-A581, 582-95b & QQS-764B condition A (303
series non-magnetic); AMS-5732, AMS-5737 & ASTMA453 (A286 series); AMS-5643Q, ASTM A484-03a &
AMS-2303E (17-4PH)
ASTM-A-108-03 (12L14), QQ-S-637, ASTM A331
(4140/4142), AMS2301J (4130)
ASTM-D-1710-91A, type I, grade I, class A; upper
service temperature 500°F, UL 94 rating of V0,
virgin grade
Polyethermide ASTM-D-5205-96, PEI-0113
Recommended for high heat applications to 340°F,
UL 94 VO
Stamped Products
Material
Material Specifications For
Stamped Products
Material
Material Specifications For
Stamped Products
Aluminum
Brass
Phosphate Bronze
Beryllium Copper
Copper
Delrin
Fiber
Glass Melamine-G9
QQ-A250/1F thru QQ-A250/29A ASTM-B-209-93, AMS 4037
ASTM-B-36-91 AEL, AMS-4505
ASTM B-103, AMS-4510
ASTM B-194, AMS-4532
STM-B-152-97A, AMS-4500
ASTM-D-4181-97, natural, long term service, temperature
ASTM-D-710-97 UL 94HB, maximum service temperature
MIL-I-24768/1-92 GME, maximum recommended
operating temperature of 284°F UL 94 rating of V-O
MIL-I-24768/17-92 GSG maximum recommended
operating temperature of 428°F UL 94 rating of V-O
MIL-I-24768/27-(GEE-F) maximum recommended
operating temperature of 284°F UL 94 rating of V-O
LP-410-natural 6/6, ASTM-D-4066-96A natural.
Service temperature 210°F UL 94 HB
Phenolic - Paper
Paper MIL-I-24768/11-92 PBG
service temperature 266°F UL 94 rating of
Linen MIL-I-24768/13 92 FBE
Service temperature 257°F UL 94 rating of HB
ASTM-D-4673-96-natural
Service temperature 160°F UL-94 HB
ASTM-D-3935-94-PC 110, B34720
continuous usage temp. 250°F UL-94 V
LP-535-E, ASTM-D-1784-97
QQ-S-700, ASTM-A-684, AMS5120
QQ-S-698, ASTM-A-109-98 & A-366-366m-97, AMS 5040
ASTM-D-3293, ASTM-D-1710-96, type I, grade I, class A
UL 94 VO
ASTM-D-5205-96, PEI-0113 UL 94 VO
Glass Silicone-G7
Glass Epoxy-G10
Nylon*
*LP/410 self extinguishing, melting point 480ºF, deformation under load 122ºF
**Aluminum 2011i-T3 is a no lead ma terial and is RoHS compliant.
*** ULTEM 1000
Polyethermide is a high hea t and flame resistant polymer with lo w smoke
properties specifically designed by General Electric. Available in round only.
+ Stainless steel type A-286 excellent service up to 1300°F requiring high strength
and good corrosion resistance.
Phenolic - Linen
A.B.S
Lexan
Plastic
Spring Steel
Steel
Teflon
ULTEM 1,000
Polyethermide***
Flame Resistance: Exceptional flame resistance with a limiting oxygen index and
low NBS smoke evolution make UL TEM 1000 polyethermide ideal for interior
components in aircraft, bus and other vehicles where such properties are required.
Properties: High heat resistance; exceptional flame retardance - U.L.V-O rated; low
smoke; high dielectric strength; lo w dissipation factor over wide frequenc y range;
stable dielectric constant over var ying tempera tures and frequencies; outstanding
mechanical properties; broad chemical resistance; excellent machinability;
transparent.
RoHS Compliant: RoHS compliance of cadmium pla
ting depends on the
classification of the end use of each product. Cadmium plating is RoHS compliant
unless the end product is in contact with food,
human skin or indoor air . Each
customer must determine if their product's end use meets the requirements for
RoHS certification.
275
MATERIAL AND TECHNICAL SPECIFICATIONS
Code
Material
1-888-208-2008
Fax (973) 244-9177
www.accuratescrew.com
TABLE OF MATERIAL PROPERTIES
Non-Metallic Materials Approximate Values
Dielectric strength v/mil (short time)
Dielectric constant @1000 kc
Power factor A 1000 kc
Tensile strength, psi
Shear strength, psi
Compressive strength, psi
Elongation, %
Flexural strength, psi
Modulus of elasticity, ksi
Hardness
Specific gravity
Thermal conductivity btu/hr/sq. ft/°F
Specific heat, btu/lb/°F
Resistance to continuous heat °F
Water absorption %
Delrin
Vulcanized
Fiber
Glass Epoxy
G10
Glass Melamine
G9
Glass Silicone
G7
Neoprene
400-465
3.7
10,000
18,000
30
14,000
380
R112
1.42
212
0.12
150-260
4-7
.03-.08
6,000-12,000
11,000-15,000
20,000-30,000
12,000-20,000
750
R80-R100
1.0-1.5
0.25
0.37
212
16-28
750-800
45,000
22,000
55,000 (flat)
70,000
2,700
M110
1.8
284
0.15
400-450
44,000
18,000
70000 (flat)
61,000
2,000
M115
1.9
284
0.6
400
18000
17,000
45,000
25,000
1,200
M105
1.78
428
0.02
1600
300
50-70 SDH
1.23
178
-
Phenolic
Nylon*
MATERIAL AND TECHNICAL SPECIFICATIONS
Dielectric strength v/mil (short time)
Dielectric constant @1000 kc
Power factor A 1000 kc
Tensile strength, psi
Shear strength, psi
Compressive strength, psi
Elongation, %
Flexural strength, psi
Modulus of elasticity, ksi
Hardness
Specific gravity
Thermal conductivity btu/hr/sq. ft/°F
Specific heat, btu/lb/°F
Resistance to continuous heat °F
Water absorption %
*Nylon - UL 94 HB ra ting
500
3.7
10000
25
12500
350
R115
1.15-1.16
1.67
0.4
428
1.2
Ultem
Teflon**
LE
Paper
500-625
5.2
13000
13500
36000 (flat)
22000
1600
M100
1.34
257
1.9
13500
11500
25000 (flat)
22000
M95
1.35
266
2
1000
300
2
3000-5000
1700
300-500
72
50-65 SHD
2.13-2.22
1.7
621
0.01
2300
710-830
3.15
15200
15000
21900
7-8
22000
480
M109
1.27
0.22
392-410
0.25
630-770
3.7
24500
14000
30700
n/a
33000
1300
M114
1.51
1.98
410-414
0.16
**Teflon - Non-flammable
Metallic Materials Typical Approximate Values
Aluminum Beryllium
2011i-T3
Copper
Tensile strength, psi
Shear strength, ksi
Elongation, %
Modulus of elasticity, ksi
Hardness
Specific gravity
Melting point °F
Electrical resistivity
(microhm-cm) 4.49
Thermal conductivity
(BTU/hr/ft2/°F)
Coef. of thermal expansion
(in/in°F) (106)
Specific Heat (btu/lb/°F)
46000
10
10600
RB75
2.77
1180
Copper
Phos.
Bronze
Steel
(12L14)
117000
68000
38000
75000
7250
5370
6670
5660
45
53
60
50
18500
14100
17000
15000
RB45-85
RB62
50 Vickers
RB80
8.41
8.5
8.94
8.89
1590-1800 1630-1650
1980
1710-1830
78000
11600
22
29000
RB68
2765
Stainless
Steel
(303)
Stainless
Steel
(304)
Stainless
Steel
(316)
A286
Stainless
Steel
(17-4 PH)
90000
75000
75000
90000
160000
11200
11900
11200
11200
50
40
40
40
5
28000
29000
29000
29200
28600
RB83
RB92
RB95
RB85
Rc36
7.92
2550-2590 2550-2590 2530-2620 2500-2610 2560-2625
7.68
6.63
1.7
9.1
17.4
72
72
74
91
98
70
819
798
2670
604
360
112
113
101
105
124
12.9
0.23
9.89
0.10
11.4
0.09
9.5-9.9
0.09
9.61
0.09
6.39-8.17
0.11
10.2
0.12
11
0.12
10.8
0.11
9.78
0.1
6.28
0.11
Soft Touch Tip
Thread
SPECIFICATIONS
276
Brass
(HOH)
2-56
4-40
6-32
8-32
10-24
A Tip
Protrusion
1/32
1/32
1/32
3/64
3/64
B Tip
Dia.
1/32
1/16
1/16
3/32
3/32
A Tip
Protrusion
10-32
3/64
1/4-20
1/16
1/4-28
1/16
5/16-18
3/32
5/16-24
3/32
Thread
B Tip
Dia.
3/32
1/8
1/8
3/16
3/16
Thread
3/8-16
3/8-24
1/2-13
1/2-20
NOTE: Information listed above was obtained from charts of various manufacturers and is intended for comparison of materials only .
ASM assumes no obligation or liability in using the above material or product for a specific application.
A Tip
Protrusion
3/32
3/32
1/8
1/8
B Tip
Dia.
3/16
3/16
1/4
1/4
1-888-208-2008
FINISHES
1
NO FINISH
20a
2
ANODIZE - MIL-A-8625F - Type II - Class 2 - (sulphuric)
Hot water seal (dk. gray)
TIN PLATE - (electro deposit) plus solderability
ASTM B 545-92 - Class C
20b
TIN/LEAD - per ASTM B579**
3
ANODIZE - MIL-A 8625F - Type II - Class 1 - (sulphuric)
Hot water seal (clear)
21
BRIGHT DIP (brass finish)
3a
ANODIZE - MIL-A-8625F - Type II - Class 2 - (sulphuric)
Hot water seal (blue)
22
CHEMICAL FILM - MIL-C-5541-E - Class 3 (c lear)
23
CHEMICAL FILM - MIL-C-5541-E - Class 1a (gold)**
3b
ANODIZE - MIL-A-8625F - Type II - Class 2 - (sulphuric)
Hot water seal (red)
24
GOLD FLASH - 0.000015 thick over silver pla te
(0.0003 thickness)
4b
ANODIZE - MIL-A-8625F - Type II - Class 2 - (d yed gold)
26
5
ANODIZE - MIL-A-8625F - Type II - Class 2
Hot water seal (black)
CHROMIUM PLATING - SAE-AMS-QQ-C-320 (bright finish)
Class 1 - Type I
27
6
CADMIUM PLATE - SAE-AMS-QQ-P-416 - Type I - Class 2*
Clear chromate
CHROMIUM PLATING - SAE-AMS-QQ-C-320 (satin finish)
Class 1 - Type II
28
6a
CADMIUM PLATE - SAE-AMS-QQ-P-416 - Type II - Class 2*
Color chromate finish
CHROMIUM PLATING - SAE-AMS-QQ-C-320 (engineering)
Class 2
29
CLEAR LACQUER
7
CADMIUM PLATE COMMERCIAL - Type I - Classes 1, 2, 3*
30
WATER DIP LACQUER
8
CADMIUM PLATE - SAE-AMS-QQ-P-416 - Type II - Class 3*
Color chromate finish
31
ZINC PLATE - ASTM B633/85 Type I - Class FE/ZN5-SC-1
(thickness .00025)
9
NICKEL PLATE - SAE-AMS-QQ-N-290 1 - Grade G
(Thickness - .0002-SB) (single layer coa ting fully bright)
31a
ZINC PLATE - colored chromate - ASTM B633/85
Type II - FE/ZN5- SC-1 (thickness -.00025)
9a
NICKEL PLATE - SAE-AMS-QQ-N-290 1 - Grade F
(Thickness - .0004-SB) (single layer coa ting fully bright)
31b
ZINC PLATE - colorless (clear) chromate - ASTM B633/85,
Type III - Class FE/ZN5-S.C-1 (thickness .00025)
10
SILVER PLATE - ASTM-B700 - Type II - Grade B (thickness -.0003)
99-S-365
31d
ZINC PLATE - (phosphate coat) - ASTM B633/85 - Type V
Class FE/ZN5-SC-1 (thickness .00025)
11
BLACK OXIDE - MIL-DTL-13924D - Class 4
For 300 series corrosion resistance steel allo ys only
31e
ZINC PLATE - per ASTM B633 - Type II - (olive drab)
32
11a
BLACK OXIDE - MIL-DTL-13924D - Class 1
(For plain carbon and low alloy steels)
SOLDER PLATE - (.0001 TO -.0003 thick; solder per J-STD-004,
SN 60 PG 40) over nickel pla te thickness 0.0001-0.0005
in AC/W SAE-AMS-P-81728 plus solderability
12
PASSIVATE - MIL-F-14072-D (ER) AMEND #1 - Type I
(Finish #E300 - passivate per ASTM-A-380-96)
34
BLACK PHOSPHATE - DOD-DTL-16232 TYZ TYM
35
BLACK ZINC - QQ-Z-325 - TYPE II
12a
PASSIVATE - AMS-QQ-P-35, ASTM A967 - Type II
37
BLACK FINISH - (used on steel parts - strictly cosmetic)
15
ALODINE 1200**
38
ELECTRO TIN PLATE - over copper flash - ASTM B545 - Type I
16
GOLD FLASH (thickness -.00003 to .00005)
39
17
GOLD FLASH over nickel flash (thickness - .00003 to .00005)
LUBRICANT - Solid film - hea t cured - corrosion inhibiting MIL-PRF-46010F - Type I - cure temperature of 150 +3°C
18
GOLD PLATE - AMS 2422, ASTM B488 - Type II - Grade C Class 2 (thickness .00010 minimum)
39a
19
TIN PLATE - (hot dipped) ASTM B 339 “PIG TIN”
Grade A - Type II
LUBRICANT - Solid film - hea t cured - corrosion inhibiting MIL-PRF-46010F - Type II - cure temperature of 204 +3°C
Types II and III
40
20
TIN PLATE - (electro deposit) ASTM 8545 - Type I
MIL-T-10727
ELECTRO POLISH - No militar y specification assigned. An
electric process used to remove the outer layer of ma terial to
brighten primarily steel, stainless steel and brass alloys.
*RoHS Compliant: RoHS compliance of cadmium pla ting depends on the classification
of the end use of each product. Cadmium plating is RoHS compliant unless the end
product is in contact with food, human skin or indoor air. Each customer must
determine if their product's end use meets the requirements for RoHS certifica tion.
**These plating codes are not RoHS compliant and we do not offer a substitute for
these platings. Do not specify these finishes if RoHS certifica tion is required.
277
MATERIAL AND TECHNICAL SPECIFICATIONS
Fax (973) 244-9177
www.accuratescrew.com
1-888-208-2008
Fax (973) 244-9177
www.accuratescrew.com
RECOMMENDED FINISHES FOR MATERIAL
ALUMINUM:
STEEL:
Anodize (Hard) Finishes - (5): Color will vary from light tan to black depending on
alloy and thickness. Provides very hard ceramic type coating. Good dielectric
properties. Corrosion resistance is good.
Black Oxide - (11, 11a): Black oxide coatings; without supplementary preservative
treatment are used when black surface is required. Limited corrosion protection
under mildly corrosive conditions, For decorative purposes or decrease in light
reflection.
Caution - (5): Anodize finishes are recommended on aluminum allo ys of 1/2" in
diameter or greater due to the higher current required to a pply said coating.
Chromium Platings - (26): Provides a bright decorative finish; corrosion protection;
wear resistance and pleasing appearance.
Silver Plated Finish - (10): Use on aluminum to enhance conductivity.
(27): Known as industrial or hard chromium; provides wear and abrasion resistance
and incidental corrosion protection of parts as the specified thickness of the pla ting
may afford.
Anodize Finishes - (2, 3, 3a, 3b): Anodized finishes are intended to provide
corrosion resistance, improve paint adhesion and abrasion resistance, for aluminum
and aluminum alloy parts. Good dielectric properties.
Alodine - (15): Provides protection and corrosion resistance. For aluminum and
aluminum alloys.
Iridite - (22): Primarily used for protection against corrosion where lower electrical
resistance is required. Will improve adhesion of paint systems on aluminum and
aluminum alloys.
Lubricant - solid film, heat cured, corrosion inhibiting - (39, 39a): Reduces wear
and prevents galling when used on aluminum and aluminum allo ys.
BRASS:
Cadmium - (6, 6a, 7, 8): Bright silvery supplementary treatments for Type II can be
golden, iridescent. Corrosion resistance is very good.
Zinc Plate - (31, 31a, 31b, 31d, 31e): Electro deposited zinc coatings applied to iron,
steel, stainless steel and brass articles provides protection from corrosion. Service
life of zinc coating is a function of its thickness and the type of environment to which
it is exposed. Bright or dull finish is acceptable.
Black Zinc - (35): Provides corrosion resistance, decorative, used on steel alloys.
Solder Plate - (32): Provides corrosion protection and solderability.
MATERIAL AND TECHNICAL SPECIFICATIONS
Nickel Plated finishes - (9, 9a): Nickel finish is hard, bright - has an attractive look
- and is corrosive resistant. Copper plated - Copper - Copper allo ys - Zinc, Zinc
based alloys and brass parts. Steel parts.
Black Phosphate - (34): Provides corrosion resistance; also acts as a lubricant.
Bright Dip - (21): Used to brighten brass material.
Black Finish - (37): Is a decorative finish, used on steel alloys.
Tin Plate - (19, 20, 20a, 38): Depending on the thickness/application specified by
the customer. Tin plate can be utilized for articles to be soldered; to prevent galling;
to prevent corrosion or to prevent forma tion of case during nutriding.
Lubricant - solid film, heat cured, corrosion inhibiting - (39, 39a): Reduces wear
and prevents galling when used on steel allo ys.
Tin Plate - (20b): ASTM B 579
Cadmium - (6, 6a, 7, 8): Bright silvery supplementary treatments for type II can be
golden, iridescent. Corrosion resistance is very good.
Clear Lacquer - (29): Provides protective tarnish and corrosion resistance, used
mostly on brass.
(28): Engineering chromium is usually applied directly to base metal and is finished
by grinding to the specific dimensions.
ALLOY STEEL:
Nickel Plate Finishes - (9, 9a): Nickel Finish is hard, bright - has an attractive look Water Dip Lacquer - (30): Provides protective tarnish and corrosion resistance, used and is corrosive resistant. Copper plated - Copper - Copper allo ys - Zinc, Zinc based
alloys and Brass parts. Steel parts.
mostly on brass.
Zinc Plate - (31, 31a, 31b, 31d, 31e): Electro deposited zinc coatings applied to
brass articles provides protection from corrosion.
Black Zinc - (35): Provides corrosion resistance, decorative, used on brass.
Black Satin Finish - (37): Is a decorative finish, used on brass.
COPPER:
Nickel Plate finishes - (9, 9a): Nickel finish is hard, bright, - has an attractive look and is corrosive resistant. Copper plated - Copper - Copper Alloys.
Black Oxide - (11, 11a): Black oxide coatings; with or without supplementar y
preservative treatment are used when black surface is required. Limited corrosion
protection under mildly corrosive conditions. For decorative purposes or decrease in
light reflection.
Zinc Plate - (31, 31a, 31b, 31d): Electro deposited zinc coatings applied to iron or
stainless steel, and brass articles provides protection from corrosion. Service life of
zinc coating is a function of its thickness and the type of environment to which it is
exposed. Bright or dull finish is acceptable.
Silver Plate Finish - (10): Semi-bright in appearance. Good corrosion resistance
depending on base metal. Will tarnish easily. Solderability is excellent but decreases
with age. For articles such as terminals which are to be soldered. Also used on
copper to enhance electrical conductivity.
Black Phosphate - (34): Provides corrosion resistance; also acts as a lubricant. (28):
Engineering chromium is usually applied directly to base metal and is finished by
grinding to the specified dimensions.
Lubricant - solid film, heat cured, corrosion inhibiting - (39, 39a): Reduces wear
and prevents galling.
Black Chrome Satin - (33): Decorative.
STAINLESS STEEL:
Passivate - (12, 12a): A process designed to remove foreign metals from the surface
of stainless steel and corrosion resistant steels and to prevent na tural tendency of
surface to oxidize.
Zinc Plate - (31, 31a, 31b, 31d, 31e): Electro deposited zinc coatings applied to
brass, steel and stainless steel articles provides protection from corrosion. Service
lift of zinc coating is a function of its thickness and the type of environment to which
it is exposed. Bright or dull finish acceptable.
Black Zinc - (35): Provides corrosion resistance, decorative, used on stainless steel.
Black Satin Finish - (37): Is a decorative finish, used on stainless steel.
Lubricant - solid film, heat cured, corrosion inhibiting - (39, 39a): Reduces wear
and prevents galling when used on stainless steel.
Black Oxide - (11, 11a): For 300 series corrosion resistance - steel only .
278
Solder Plate - (32): Provides corrosion protection and solderability.
1-888-208-2008
Fax (973) 244-9177
www.accuratescrew.com
METRIC SPECIFICATIONS
SPACERS
Tolerances in manufacture of Standoffs and Spacers
Length: up to 100MM long +.13 MM O.D. +.152 MM
METRIC THREADS
Clearance Hole
Diameter
x Pitch
Clearance
Hole Range
1.6 x 0.35
2.0 x 0.40
2.5 x 0.45
3.0 x 0.50
3.5 x 0.60
4.0 x 0.70
5.0 x 0.80
6.0 x 1.00
6.3 x 1.00
8.0 x 1.25
1.8 - 2.1
2.2 - 2.8
2.7 - 3.1
3.2 - 3.6
3.5 - 4.2
4.2 - 4.8
5.3 - 6.0
6.3 - 7.0
6.7 - 7.5
8.5 - 9.5
Depth of Thread
Recommended
Thread Sizes
Diameter x Pitch
Recommended blind hole
thread engagement
(drilled and ta pped both ends)
M1.6 x 0.35
2.0 x 0.40
2.5 x 0.45
3.0 x 0.50
3.5 x 0.60
4.0 x 0.70
5.0 x 0.80
6.0 x 1.00
8.0 x 1.25
10.0 x 1.50
12.0 x 1.75
14.0 x 2.00
Length of Thread
Brass, Aluminum & Steel Parts: M2.5 thread is tapped thru
15.9MM in length. M3 and larger thread is ta pped thru 25.4 MM
in length.
Screw
Engagement
Thread Size
M 2.5
3.0
3.5
4.0
5.0
6.0
8.0
4.8mm
8.4
9.5
11.1
12.7
14.3
14.3
Stainless Steel & Nylon Parts: M2.5 thread is tapped thru 9.6
MM in length M3 thread is ta pped thru 12.7 MM in length.
M3.5 and larger thread is ta pped thru 25.4MM in length. For
lengths longer than specified above, see DEPTH OF THREAD
CHART.
HOW TO ORDER METRIC PARTS
Step 1 Choose American Standard part number from our ca talog.
EXAMPLE OF THREADED SPACER: 1130-R-SS- .250-12
Step 2 Simply add your metric requirements to our part number .
EXAMPLE OF METRIC THREADED SPACER: 1130-R-SS-.250-12 (M 3.5 x 0.6 Thd.)
Metric Thread
Just add requirement here.
HOW TO ORDER METRIC MALE/FEMALE STANDOFF
Choose American Standard part number from our ca talog.
EXAMPLE OF MALE FEMALE STANDOFF:
14010-H-SS-.625-12
MALE/FEMALE SPECIFICATION
Metric Thread
Then simply add your metric requirements to our part number .
EXAMPLE:
14010-H-SS-.625-12 (M3.0 x .5 Thread)
Just add requirement here.
Or if you need a longer Male thread:
EXAMPLE:
14010-H-SS-.625-12 (B = 3.0 x .5 Thread, B= 7.5 MM Length)
M 2.5 x .45
3.0 x 0.5
3.5 x 0.6
4.0 x 0.7
5.0 x 0.8
6.0 x 1.0
8.0 x 1.25
A
Min Depth
3.97
4.76
6.35
9.53
9.53
12.70
12.70
B
4.76
6.35
9.53
11.10
12.70
15.00
15.00
Just add requirement here.
NOTE: When the body length L is less than or equal to the thread depth A we will provide the maximum number of threads possible.
279
MATERIAL AND TECHNICAL SPECIFICATIONS
CONVERSION TABLE
To convert inches to millimeters multiply inches x 25.4
To convert millimeters to inches multiply millimeters x 0.039370
1-888-208-2008
Fax (973) 244-9177
www.accuratescrew.com
METRIC SCREW SPECIFICATIONS
FOR REFERENCE ONLY
Oval Head
Machine Screw
Slotted
Pan Head
Slotted
Machine Screw
Phillips
Thread Size d M2 M2.5 M3
Head Hght Max k 1.7 2.1 2.4
Head Dia Max d2 4.4 5.5 6.3
Driver Size No. 1
1
1
M4
3.7
9.4
2
M5 M6
3.9 4.7
10.4 12.6
2
3
Dimensions
in millimeters
MATERIAL AND TECHNICAL SPECIFICATIONS
Dimensions in millimeters
M2 M2.5 M3
1.6
2
2.4
4
5
6
1
1
1
M4
3.1
8
2
M5
3.8
10
2
M6
4.6
12
3
Thread Size
Head Hght
Head Dia
Pitch
280
M5
3
10
.80
M6
3.6
12
1
Dimensions
in millimeters
Phillips
d
k
d2
p
M2 M2.5 M3
1.2 1.5 1.65
3.8 4.7 5.6
.40 .45 .50
M4
2.2
7.5
.7
M5
2.5
9.2
.8
M6
3
11
1
M8 M10
4
5
14.5 18
1.25 1.50
Dimensions in millimeters
M3
3
5.5
2.5
M4
4
7
3
M5
5
8.5
4
M6
6
10
5
M8
8
13
6
M10
10
16
8
M12 M14
12
14
10
21
10
12
Button Head
5.7
7.6
9.5
10.5
14.0
17.5
21.0
28.0
M4
2.4
8
.70
Hexagon Head
Cap Screw
Dimensions in millimeters
Head Dia.
B Max.
M3
1.8
6
.50
Dimensions in millimeters
Socket Head
Cap Screw
Thread Size d
Head Hght k
Head Dia d2
Hex Key Sz s
d
k
d2
p
Flat Head
Machine Screw
Slotted
Pan Head
Cross Recessed
Machine Screw
Thread Size d
Head Hght
k
Head Dia
d2
Driver Sz
No.
Thread Size
Head Hght
Head Dia
Pitch
M16 M20
16
20
24
30
14
17
Thread Size
d
Head Hght
k
Across Flats s
Pitch
p.7
M4
2.8
7
.8
M5
3.5
8
1
M6
4
10
1.25
Important Data,
Metric Machine Screws
Head Hgt
R Max
Socket Sz
S Nom.
1.65
2.20
2.75
3.30
4.40
5.50
6.60
8.80
2
2.5
3
4
5
6
8
10
Nom Screw
Length
Dimensions
in millimeters
to 3 mm incl.
over 3 to 10 mm
over 10 to 16 mm
over 16 to 50 mm
over 50 mm
Tolerance
on Length
mm
0.2
0.3
0.4
0.5
1.0
M8
5.5
13
1.5
M10 M12
7
8
17
19
1.75
2
M14 M16 M20 M24
9
10
13
15
22
24
30
36
2
2.5
3
Position of Head : The axis of the head
shall be loca ted at true position rela tive
to the axis of the screw shank within a
tolerance zone ha ving a diameter
equivalent to 6% of the specified
maximum head diameter , or the
specified maximum width across flats of
hex and hex flange heads, regardless of
feature size.
All tolerances are plus and minus.
1-888-208-2008
Fax (973) 244-9177
www.accuratescrew.com
IMPORTANT DATA: MACHINE SCREWS
TOLERANCES
All dimensions in inches unless otherwise specified.
Two Place Decimal . . . . . . . .+.010
Three Place Decimal . . . . . .+.005
Fractions . . . . . . . . . . . . . . .+1/64"
Note:
1. Up to 4" long all spacers and standoffs are kept to + .005.
2. 4" to 6" long +.008.
3. Over 6" long +.010.
ECCENTRICITY: The heads of machine screws shall not be
eccentric with the body beyond a tolerance of 3% of the maximum
head diameter.
TOLERANCE IN LENGTH: The length for socket head ca p screw
class 3A UNRC see table on pa ge 286.
NOMINAL SCREW SIZE
NOMINAL SCREW LENGTH
Up to 1/2 in., incl.
Over 1/2 to 1 in., incl
Over 1 to 2 in., incl.
Over 2 in., incl.
SPECIAL CLOSE TOLERANCES are available.
Just add to part number.
EXAMPLE: 2030R - A - .500 - 1 (MOD L=+.002)
DIAMETER: St’d Commercial Tolerances on bar & rod.
0 - 12
1/4 - 3/4
TOLERANCE ON LENGTH
-0.02
-0.03
-0.03
-0.03
-0.06
-0.06
-0.09
-0.09
FOR LEAD POINT C APTIVE SCREW ONLY
ROUND - COLD FINISHED:
Under 5/16" . . . . . . . . . . . .+.001"
5/16" to 1/2", incl. . . . . . . . .+.0015
1/2" to 1", incl. . . . . . . . . . .+.002
0 - 12
1/4 - 3/4
TOLERANCE ON LENGTH
Up to 1/2 in., incl.
Over 1/2 to 1 in., incl
Over 1 to 2 in., incl.
Over 2 in., incl.
-0.03
-0.04
-0.07
-0.09
-0.04
-0.04
-0.07
-0.09
MATERIAL AND TECHNICAL SPECIFICATIONS
NOMINAL SCREW SIZE
NOMINAL SCREW LENGTH
THREAD INFORMATION
Tapped thru when L
Length is NOT longer
than dimension
shown.
L Length Not Longer than Shown
Thread
L
Aluminum, Brass,
Steel, Nylon
L
Stainless Steel
0-80
1-72
2-56
3-48
3-56
4-40
4-48
5-40
6-32
6-40
8-32
10-24
10-32
12-24
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
3/8
3/8
1/2
1/2
1/2
1
1
1
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1/4
1/4
3/8
3/8
3/8
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
Use the “Blind
Tap Depth” part
of chart below
when L Length
is longer than
shown at left.
Blind Tap Depth Min.
L
Aluminum, Brass, Steel, St. Steel,
Nylon Min Screw Engagement
3/16
3/16
3/16
3/16
3/16
1/4
1/4
5/16
3/8
3/8
7/16
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
SURFACES
63
SCREWDRIVER SLOT
DIMENSIONS
Unless otherwise specified
OD Diameter
Max
Up to .160
.161 to .182
.183 to .204
.205 to .225
.226 to .269
.270 to .312
.313 to .413
.414 and up
W
Max Min
Max
Min
.031
.035
.039
.039
.048
.054
.060
.075
.030
.034
.038
.042
.053
.074
.080
.111
.022
.026
.030
.025
.033
.052
.057
.083
.023
.027
.031
.031
.039
.045
.050
.064
H
NOTES:
1. Threads are supplied cut or rolled a t our option unless specifically noted on order.
2. Responsibility ends with customer inspection or 10 days after customer receives parts. No returns will be accepted without pri or approval from factory in writing.
3. All parts are stocked in plain finish. Parts will be plated to customer specifications.
4. The items in this ca talog are designed and manufactured to be functional. Engineering evaluation and quality assurance evalua tions should be accomplished with
functionability as a prime criteria.
5. All threads are Class 2A and Class 2B Commercial, except Socket Head Cap Screws which are Class 3A Threads. Once plated will not enter 3A GO and
NO GO GAGES.
281
1-888-208-2008
Fax (973) 244-9177
www.accuratescrew.com
MATERIAL COMPATIBILITY SELECTION DATA
Galvanic Corrosion
• Figure 1 •
Effects of Galvanic Corrosion
Similar metals are compatible; dissimilar metals are not
. When
dissimilar metals contact in the presence of an electrolyte, a
galvanic action occurs which causes one of the metals to corrode
at a much faster than normal rate, while the other corrodes more
slowly, if at all. The rate, location and extent of the corrosion
depends on three factors:
– the difference in electrical potentials
– the conductivity strength of the corroding medium
– the relative sizes of the contacting areas
All metals have electrical potentials.
Through research, the
potentials of different base metals and their alloys, when exposed
to sea water, were measured and then ranked into a series.
MATERIAL AND TECHNICAL SPECIFICATIONS
Galvanic Series
Table 1 presents the Galvanic Series of Metals and
Alloys. The
various metals are grouped. Those within the same group are
reasonably compatible when used together; those from dif ferent
groups cause a corrosion problem. Some metals – basically those
with significant contents of nickel and chromium – are included in
the Series both in their active and passive conditions. Passivation
(surface cleaning and sealing) lowers the metal’
s electrical
potential and improves its corrosion behavior.
In an electrical couple, the metal of higher electrical potential is the
cathode (-), that of the lower the anode (+). Current flows from the
cathode to the anode, from the anode through the electrolyte
(corroding medium) and back to the cathode. Corrosion occurs at
the point the current leaves the anode to enter the electrolyte.
When dissimilar metals contact, the anode corrodes, the cathode
survives.
Study of the Galvanic Series suggests that steel and aluminum are
reasonably compatible; but, if titanium and aluminum contact, the
aluminum, as the anode, will corrode. Fig. 1 illustrates an example.
The bolt, where it contacts the aluminum, will not corrode, because
it is now the cathode. The aluminum plate in contact with the bolt
may corrode, but only slightly because of the minor dif ference in
their electropotentials and the large anode-to-cathode area ratio.
The aluminum plate will corrode where its exposed exterior
surfaces contact the copper plate. The aluminum plate may also
corrode on its interior surface, but not to the same degree, because
the corroding medium and oxygen supply are largely sealed out
due to the bolt’s clamping action.
282
• Table 1 •
Galvanic Series of Metals and Alloys
+ Corroded End (anodic, or least noble)
Magnesium
Magnesium alloys
Zinc
Aluminum 1100
Cadmium
Aluminum 2024-T4
Steel or Iron
Cast Iron
Chromium-Iron (active)
Ni-Resist cast iron
Type 304 Stainless (active)
Type 316 Stainless (active)
Lead tim solders
Lead
Tin
Nickel (active)
Inconel nickel-chromium alloy (active)
Hastelloy Alloy C (active)
Brass
Copper
Bronzes
Copper-nickel alloys
Monel nickel-copper alloy
Silver solder
Nickel (passive)
Inconel nickel-chromium alloy (passive)
Chromium-Iron (passive)
Type 304 Stainless (passive)
Type 316 Stainless (passive)
Hastelloy Alloy C (passive)
Silver
Titanium
Graphite
Gold
Platinum
– Protect End (cathodic, or most noble)
1-888-208-2008
Fax (973) 244-9177
www.accuratescrew.com
FOR REFERENCE ONLY: SOCKET CAP SCREWS
Nominal Size or
Basic Screw
Diameter
0
1
2
3
4
5
6
8
10
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
See
Notes
0.0600
0.0730
0.0860
0.0990
0.1120
0.1250
0.1380
0.1640
0.1900
0.2500
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
0.8750
1.0000
1
D
Body Diameter
A
Head Diameter
H
Head Height
S
Max
Min
Max
Min
Max
Min
Head Side
Height
Max
0.0600
0.0730
0.0860
0.0990
0.1120
0.1250
0.1380
0.1640
0.1900
0.2500
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
0.8750
1.0000
0.0568
0.0695
0.0822
0.0949
0.1075
0.1202
0.1329
0.1585
0.1840
0.2435
0.3053
0.3678
0.4294
0.4919
0.6163
0.7406
0.8647
0.9886
0.096
0.118
0.140
0.161
0.183
0.205
0.226
0.270
0.312
0.375
0.469
0.562
0.656
0.750
0.938
1.125
1.312
1.500
0.091
0.112
0.134
0.154
0.176
0.198
0.218
0.262
0.303
0.365
0.457
0.550
0.642
0.735
0.921
1.107
1.293
1.479
0.060
0.073
0.086
0.099
0.112
0.125
0.138
0.164
0.190
0.250
0.312
0.375
0.438
0.500
0.625
0.750
0.875
1.000
0.057
0.070
0.083
0.095
0.108
0.121
0.134
0.159
0.185
0.244
0.306
0.368
0.430
0.492
0.616
0.740
0.864
0.988
0.054
0.066
0.077
0.089
0.101
0.112
0.124
0.148
0.171
0.225
0.281
0.337
0.394
0.450
0.562
0.675
0.787
0.900
2,15
3
4
J
Hex Socket Size
Nominal
0.050
0.062
0.078
0.078
0.094
0.094
0.109
0.141
0.156
0.188
0.250
0.312
0.375
0.375
0.500
0.625
0.750
0.750
1/16
5/64
5/64
3/32
3/32
7/64
9/64
5/32
3/16
1/4
5/16
3/8
3/8
1/2
5/8
3/4
3/4
21
T
Key
Engagmt
Min
G
Wall
Thkns
Min
K
Chamfer or
Radius
Max
0.025
0.031
0.038
0.044
0.051
0.057
0.064
0.077
0.090
0.120
0.151
0.182
0.213
0.245
0.307
0.370
0.432
0.495
0.020
0.025
0.029
0.034
0.038
0.043
0.047
0.056
0.065
0.095
0.119
0.143
0.166
0.190
0.238
0.285
0.333
0.380
0.003
0.003
0.003
0.003
0.005
0.005
0.005
0.005
0.005
0.008
0.008
0.008
0.010
0.010
0.010
0.010
0.015
0.015
6
283
MATERIAL AND TECHNICAL SPECIFICATIONS
• Table 1 •
Dimensions of Hexagon and Spline Socket Head Cap Screws (1960 Series)
1-888-208-2008
Fax (973) 244-9177
www.accuratescrew.com
FOR REFERENCE ONLY: SOCKET CAP SCREWS
(CONTINUED)
Notes to Table 1:
1. Nominal Size. Where specifying nominal size in decimals,zeros
preceding decimal and in the fourth decimal place shall be omitted.
Figure 1. Underhead Fillet Detail
2. Body. The term body refers to the unthreaded cylindrical portion
of the shank for those screws not threaded to the head.
3. Head Diameter. Heads may be plain or knurled at the option of
the manufacturer, unless otherwise specified by the customer . For
knurled screws the maximum head diameter shall be measured
across the tops of the knurl and the minimum head diameter shall
be the diameter of the unknurled portion,or the diameter across the
tops of the knurl for those screws not ha ving an unknurled portion,
just above the radius or chamfer a t the bottom edge of the head.
MATERIAL AND TECHNICAL SPECIFICATIONS
4. Head Chamfer. The head shall be chamfered. The chamfer E
shall be at an angle of 30 - 45 degrees with the plane of the top of
the head. The edge between the top of the head and the chamfer
may be slightly rounded.
5. Bearing Surf ace. The plane of the bearing surface shall be
perpendicular to the axis of the screw within a maximum devia tion
of 1 degree.
6. Edge of Head. The edge between the bearing surface and the
side of the head may be broken (rounded or chamfered) but the
radius or chamfer measured along the bearing surface shall not
exceed the values listed for K.
7. Concentricity.
a. The head shall be concentric with the shank within 1% of the
basic screw diameter, D maximum, (2% total runout) or 0.006 inch
total runout, whichever is greater, when held within one diameter of
the head but beyond the fillet.
b. The socket shall be concentric with the shank within 1-1/2% of
the basic screw diameter, D maximum. (3% total runout) or 0.005
inch whichever is greater for sizes through 1/2 in and 3% (6% total
runout) for sizes above 1/2 in.
c. Total runout between thread, body and head: Screws shall
assemble into a compound hole which is threaded at one end to the
basic thread size (3B minimum), for a length equivalent to 1-1/2 D,
counterbored at the other end to diameter Ae listed in Table 1C, and
whose center portion is equal to D e. Diameters De and Ae shall be
concentric with the axis of the thread.
The length of the center
portion shall be equal to the screw length minus two screw
diameters (2D). The starting thread shall be chamfered and the
junction between diameters Ae and D e shall be rounded to a value
equal to F maximum.
284
• Table 1A •
Dimensions of Underhead Fillets
Nominal
Screw
Size
0
1
2
3
4
5
6
8
10
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
F Fillet
Extension
Max
0.007
0.007
0.008
0.008
0.009
0.010
0.010
0.012
0.014
0.014
0.017
0.020
0.023
0.026
0.032
0.039
0.044
0.050
Min
0.003
0.003
0.004
0.004
0.005
0.006
0.006
0.007
0.009
0.009
0.012
0.015
0.018
0.020
0.024
0.030
0.034
0.040
FL
Fillet
Length
Max
0.012
0.012
0.014
0.014
0.015
0.017
0.017
0.020
0.024
0.024
0.029
0.034
0.039
0.044
0.054
0.066
0.075
0.085
R
Juncture
Radius
Min
0.002
0.003
0.003
0.004
0.004
0.005
0.005
0.006
0.006
0.007
0.009
0.012
0.014
0.016
0.021
0.025
0.031
0.034
8. Fillet. For all lengths of screws the form of the underhead fillet
shall be optional, as depicted in Figure 1, provided it is a smooth and
continuous conca ve cur ve fairing into the bearing surface of the
head and the screw shank within the envelope established by the
limits for fillet extension, length and juncture radius specified in
Table 1A.
9. Length. The length of the screw shall be measured parallel to
the axis of the screw from the plane of the bearing surface under
the head to the plane of the flat of the point. the portion of the screw
contained within dimension L is commonly called the shank. The
basic length dimension on the product shall be the nominal length
expressed as a two-place decimal.
1-888-208-2008
Fax (973) 244-9177
www.accuratescrew.com
FOR REFERENCE ONLY: SOCKET CAP SCREWS
(CONTINUED)
Nominal Screw Size
0 thru 7/16 7/8 thru
thru
3/8,
1-1/2,
incl 3/4, incl incl
Nominal Screw
Length
Up to 1 inch., incl.
Over 1 in to 2-1/2 , incl.
Over 2-1/2 to 6, incl.
Over 6
Over
1-1/2
Tolerance on Length
-0.03
-0.04
-0.06
-0.12
-0.03
-0.06
-0.08
-0.12
-0.05
-0.10
-0.14
-0.20
–
-0.18
-0.20
-0.24
11. Length Tolerances. The allowable tolerance for LEAD POINT
captive screws only shall be as tabula ted below:
Nominal Screw Size
0 thru 7/16 7/8 thru
thru
3/8,
1-1/2,
incl 3/4, incl incl
Nominal Screw
Length
Up to 1 inch., incl.
Over 1 in to 2-1/2 , incl.
Over 2-1/2 to 6, incl.
Over 6
Over
1-1/2
Tolerance on Length
.04
.05
.07
.13
.04
.07
.09
.13
.06
.11
.15
.21
–
.19
.21
.25
12. Threads. Threads shall be Unified external threads with radius
root: Class 3A UNC and UNF Series for screw sizes 0 (0.060 in.)
through 1 in.: Class 2A UNC and UNF Series for sizes over 1 in. to
1-1/2 in., inclusive: and Class 2A UNC Series for sizes larger that 11/2 in.
Class 3A does not provide a pla
ting allo wance. When pla ted
products are required it is recommended that they be procured from
the manufacturer. (See paragraph 1.8).
13. Thread Length, LT. The length of thread shall be measured,
parallel to the axis of screw , from the extreme point to the last
complete (full form) thread. The thread length on socket head ca p
screws shall be as defined by Table 1B and notes thereto.
14. Griping Gaging Length, LG. The grip ga ging length is the
distance, measured parallel to the axis of screw , from the bearing
surface of the head to the first complete (full form) thread under the
head (see Table 1B).
15. Body Length, LB. The bod y length is the length, measured
parallel to the axis of screw , of the unthreaded portion of the shank
(See table 1B).
16. Screw P oint Chamfer . The point shall be fla t or slightly
concave and chamfered.
The plane of the point shall be
approximately normal to the axis of the screw . The chamfer shall
extend slightly belo w the root of the thread and the edge between
the flat and chamfer may be slightly rounded. The included angle
of the point should be a pproximately 90 degrees. Chamfering of
screw sizes up to and including size 8 (0.164 in.) shall be optional.
17. Material. Steel, corrosion resistant. Cap screws shall be
fabricated from austenitic corrosion resistant steel of types 18-8,
AISI 384, or equivalent types, and shall ha ve a minimum tensile
strength of 80,000 psi for sizes up to and inc luding 5/8 in. and
70,000 psi for sizes larger than 5/8 in.
18. Surface Roughness. For allo y steel screws of up to and
including 5/8 in., and nominal lengths equal to or less than 8 times
the basic screw diameter , the surface roughness of the screws
before pla ting shall not exceed 63 microinches (arithmetical
average) on the fillet and head bearing surfaces, nor exceed 32
microinches (arithmetical average) on the threads.
For larger sizes, longer lengths, and corrosion resistant steel
screws, the surface roughness of the screws prior to pla ting shall
not exceed 125 micro-inches (arithmetical a verage) on the bod y
(see Note 2), fillet (see Note 8) and head bearing surfaces.
Normally, it shall be sufficient to ascertain tha t these surfaces on
screws have the equivalent of a smooth machined finish by visual
comparison with kno w surface standards. However, where it is
practical and deemed necessar y to measure these surfaces with
commercially available equipment, roughness measurements shall
be taken axially on the bod
y and fillet surfaces,
and
circumferentially on the bearing surface.
19. Drawings. On socket screw drawings when the distance from
the bearing surface of the head to the threading is dimensioned,
regardless of type of thread representa tion, the dimension should
be noted to indica te whether Bod y Length or Grip Length is
required.
20. See Table 7 for spline socket dimensions, and Appendix 1 for
gaging of spline sockets.
21. See Table 6 for hexagon socket dimensions, and Appendix 1 for
gaging of hexagon sockets.
22. Designation. Hexagon and Spline Socket Head Ca p Screws
shall be designa ted by the follo wing data in the sequence sho wn:
Nominal size (number, fractional or decimal equivalent); threads per
inch; length (fractional or decimal equivalent); product name;
material; and protective coating, if required. See examples below:
6-32 x 3/4 Hexagon Socket Head Cap Screw, Alloy Steel
.138 - 32 x .75 Spline Socket Head Ca p Screws,
Alloy Steel, Cadmium Plated.
285
MATERIAL AND TECHNICAL SPECIFICATIONS
10. Length Tolerances. The allowable tolerance on length shall be
as tabulated below:
1-888-208-2008
Fax (973) 244-9177
www.accuratescrew.com
FOR REFERENCE ONLY: SOCKET CAP SCREWS
(CONTINUED)
Table 1B Body and Grip Lengths for Socket Head Cap Screws (1960 Series)
Nom
Size
0
1
2
3
4
5
6
8
10
Nom
Length
LG
LB
LG
LB
LG
LB
LG
LB
LG
LB
LG
LB
LG
LB
LG
LB
LG
LB
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
.25
.25
.50
.75
...
...
...
...
...
...
...
...
...
...
...
.19
.19
.44
.69
...
...
...
...
...
...
...
...
...
...
...
.25
.25
.62
.88
...
...
...
...
...
...
...
...
...
...
.17
.17
.55
.80
...
...
...
...
...
...
...
...
...
...
.25
.25
.62
.88
1.12
...
...
...
...
...
...
...
...
...
.16
.16
.54
.79
1.04
...
...
...
...
...
...
...
...
...
.25
.25
.62
.88
1.12
1.38
...
...
...
...
...
...
...
...
.15
.15
.52
.77
1.02
1.27
...
...
...
...
...
...
...
...
.25
.25
.75
.75
1.25
1.25
...
...
...
...
...
...
...
.12
.12
.62
.62
1.12
1.12
...
...
...
...
...
...
...
.25
.25
.75
.75
1.25
1.25
1.75
...
...
...
...
...
...
.12
.12
.62
.62
1.12
1.12
1.62
...
...
...
...
...
...
.50
.50
1.00
1.00
1.50
1.50
2.00
...
...
...
...
...
.34
.34
.84
.84
1.34
1.34
1.84
...
...
...
...
...
.38
.38
.88
.88
1.38
1.38
1.88
1.88
2.38
...
...
...
.22
.22
.72
.72
1.22
1.22
1.72
1.72
2.22
...
...
...
.38
.38
.88
.88
1.38
1.38
1.88
1.88
2.38
2.38
2.88
2.88
.17
.17
.67
.67
1.17
1.17
1.67
1.67
2.17
2.17
2.67
2.67
LB
LG
LB
LG
LB
.50
.50
.50
.50
1.50
1.50
1.50
1.50
2.50
2.50
2.50
2.50
3.50
3.50
3.50
3.50
4.50
4.50
4.50
4.50
5.50
5.50
6.50
6.50
7.50
8.50
9.50
10.50
11.50
12.50
...
...
...
...
...
1.00
1.00
1.00
1.00
2.00
2.00
2.00
2.00
3.00
3.00
3.00
3.00
4.00
4.00
4.00
4.00
5.00
5.00
5.00
5.00
6.00
6.00
7.00
7.00
8.00
9.00
10.00
11.00
12.00
13.00
14.00
15.00
...
...
.44
.44
.44
.44
1.44
1.44
1.44
1.44
2.44
2.44
2.44
2.44
3.44
3.44
3.44
3.44
4.44
4.44
4.44
4.44
5.44
5.44
6.44
6.44
7.44
8.44
9.44
10.44
11.44
12.44
13.44
14.44
...
...
1.00
1.00
1.00
1.00
2.00
2.00
2.00
2.00
3.00
3.00
3.00
3.00
4.00
4.00
4.00
4.00
5.00
5.00
5.00
6.00
6.00
7.00
7.00
8.00
9.00
10.00
11.00
12.00
13.00
14.00
15.00
16.00
17.00
.38
.38
.38
.38
1.38
1.38
1.38
1.38
2.38
2.38
2.38
2.38
3.38
3.38
3.38
3.38
4.38
4.38
4.38
5.38
5.38
6.38
6.38
7.38
8.38
9.38
10.38
11.38
12.38
13.38
14.38
15.38
16.38
Nom
Size
1/4
5/16
3/8
7/16
1/2
5/8
3/4
MATERIAL AND TECHNICAL SPECIFICATIONS
Nom
Length
LG
LB
LG
LB
LG
LB
LG
LB
LG
LB
LG
LB
LG
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
4
4-1/4
4-1/2
4-3/4
5 4.00
5-1/4
5-1/2
5-3/4
6
6-1/4
6-1/2
6-3/4
7
7-1/4
7-1/2
7-3/4
8
8-1/2
9
9-1/2
10
11
12
13
14
15
16
17
18
19
20
.50
.50
1.00
1.00
1.50
1.50
2.00
2.00
2.50
2.50
3.00
3.00
3.50
3.50
.25
.25
.75
.75
1.25
1.25
1.75
1.75
2.25
2.25
2.75
2.75
3.25
3.25
3.75
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
.62
.62
1.12
1.12
1.62
1.62
2.12
2.12
2.62
2.62
3.12
3.12
3.62
3.62
4.12
4.12
4.62
4.62
5.12
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
.35
.35
.85
.85
1.35
1.35
1.85
1.85
2.35
2.35
2.85
2.85
3.35
3.35
3.85
3.85
4.35
4.35
4.85
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
.50
.50
1.00
1.00
1.50
1.50
2.00
2.00
2.50
2.50
3.00
3.00
3.50
3.50
4.00
4.00
4.50
4.50
5.00
5.00
5.50
5.50
6.00
6.00
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
.19
.19
.69
.69
1.19
1.19
1.69
1.69
2.19
2.19
2.69
2.69
3.19
3.19
3.69
3.69
4.19
4.19
4.69
4.69
5.19
5.19
5.69
5.69
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
.62
.62
1.12
1.12
1.62
1.62
2.12
2.12
2.62
2.62
3.12
3.12
3.62
3.62
4.12
4.12
4.62
4.62
5.12
5.12
5.62
5.62
6.12
6.12
6.62
7.12
7.62
...
...
...
...
...
...
...
...
...
...
...
...
.27
.27
.77
.77
1.27
1.27
1.77
1.77
2.27
2.27
2.77
2.77
3.27
3.27
3.77
3.77
4.27
4.27
4.77
4.77
5.27
5.27
5.77
5.77
6.27
6.77
7.27
...
...
...
...
...
...
...
...
...
...
...
...
.75
.75
.75
1.50
1.50
1.50
2.25
2.25
2.25
3.00
3.00
3.00
3.75
3.75
3.75
4.50
4.50
4.50
5.25
5.25
5.25
6.00
6.00
6.00
7.00
7.00
8.00
8.00
...
...
...
...
...
...
...
...
...
...
.36
.36
.36
1.12
1.12
1.12
1.86
1.86
1.86
2.62
2.62
2.62
3.36
3.36
3.36
4.12
4.12
4.12
4.86
4.86
4.86
5.62
5.62
5.62
6.62
6.62
7.62
7.62
...
...
...
...
...
...
...
...
...
...
.75
.75
.75
1.50
1.50
1.50
2.25
2.25
2.25
3.00
3.00
3.00
3.75
3.75
3.75
4.50
4.50
4.50
5.25
5.25
5.25
6.00
6.00
6.75
6.75
7.75
7.75
9.25
10.25
...
...
...
...
...
...
...
...
.30
.30
.30
1.04
1.04
1.04
1.80
1.80
1.80
2.54
2.54
2.54
3.30
3.30
3.30
4.04
4.04
4.04
4.80
4.80
4.80
5.54
5.54
6.30
6.30
7.30
7.30
8.80
9.80
...
...
...
...
...
...
...
...
1.00
1.00
1.00
1.00
2.00
2.00
2.00
2.00
3.00
3.00
3.00
3.00
4.00
4.00
4.00
4.00
5.00
5.00
5.00
5.00
6.00
6.00
7.00
7.00
8.00
9.00
10.00
11.00
12.00
13.00
...
...
...
...
...
286
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
7/8
1
1-888-208-2008
Fax (973) 244-9177
www.accuratescrew.com
FOR REFERENCE ONLY: SOCKET CAP SCREWS
(CONTINUED)
Notes to Table 1B:
2. Screws having nominal lengths falling between those for which
LG and L B values are tabula ted in Table 1B shall ha ve L G and L G
dimensions conforming with those of the next shorter tabula
ted
nominal length for the respective screw size. For example: for a 1/4
inch size screw, 1-7/8 inch long, LG=0.50 inch and L B =0.25 inch.
4. For screws of nominal lengths longer than those for which L G
and LB values are tabulated in Table 1B and for screws over 1 inch
in diameter, the maximum grip ga ging length L G and the minimum
body length L B of the screws shall be determined as follo ws:
LG
LB
Where: L
LT
LTT
= L - LT
= L - L TT
= Nominal length
= Minimum thread length tabula ted below
= Maximum total thread length tabula ted below
3. For screws of nominal length above the hea vy line in Table 1B
the complete (full form) threads measured with a thread ring ga ge,
having the thread chamfer and/or counterbore removed,
shall
extend to within two pitches (threads) of the head for sizes 0 (0.060
in.) through 5/8 inches inc lusive and shall extend as c lose to the
head as is practical for sizes larger than 5/8 inches.
Screws over 1 inch in diameter and of lengths shorter than the
minimum thread length LT plus 5 times the pitch of the UNRC thread
for the respective screw size shall have complete (full form) threads
extending as close to the head as is practicable. See Note 4 for L T
values.
Nominal Size or
Basic Screw
Diameter
0
1
2
3
4
5
6
8
10
1/4
5/16
3/8
7/16
1/2
5/8
3/4
0.0600
0.0730
0.0860
0.0990
0.1120
0.1250
0.1380
0.1640
0.1900
0.2500
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
LT
Thread
Length
Min
LTT
Total
Thread
Length
Max
Nominal Size or
Basic Screw
Diameter
LT
Thread
Length
Min
0.50
0.62
0.62
0.62
0.75
0.75
0.75
0.88
0.88
1.00
1.12
1.25
1.38
1.50
1.75
2.00
0.62
0.77
0.80
0.83
0.99
1.00
1.05
1.19
1.27
1.50
1.71
1.94
2.17
2.38
2.82
3.25
7/8
0.8750
1
1.0000
1-1/8 1.1250
1-1/4 1.2500
1-3/8 1.3750
1-1/2 1.5000
1-3/4 1.7500
2 2.0000
2-1/4 2.2500
2-1/2 2.5000
2-3/4 2.7500
3
3.0000
3-1/4 3.2500
3-1/2 3.5000
3-3/4 3.7500
4
4.0000
2.25
2.50
2.81
3.12
3.44
3.75
4.38
5.00
5.62
6.25
6.88
7.50
8.12
8.75
9.38
10.00
All drawings and designs herein ha ve been reviewed and ha ve been determined to meet the requisite specifica tions contained herein.
LTT
Total
Thread
Length
Max
3.69
4.12
4.65
5.09
5.65
6.08
7.13
8.11
8.99
10.00
10.87
11.75
12.63
13.50
14.37
15.25
287
MATERIAL AND TECHNICAL SPECIFICATIONS
1. The tabula te L G values are maximum and represent the
minimum design grip length of the screw . They shall be measured
from the bearing surface of the head to the face of a GO thread ring
gage, having the thread countersink and/or counterbore removed,
which has been assembled by hand as far as the thread will permit.
The tabulated L B values are minimum and represent the minimum
body length of the screw . They are equal to L G minus 5 times the
pitch of the UNRC thread for the respective screw size.
1-888-208-2008
Fax (973) 244-9177
www.accuratescrew.com
INDEX BY PART NUMBER
Part Number
Page
MATERIAL AND TECHNICAL SPECIFICATIONS
10 - 499 . . . . . . . . . . . .198-213
561 - 566 . . . . . . . . . . . . . . . . .24
700 - 791 . . . . . . . . . . . . .113-115
900 - 998 . . . . . . . . . . . . . . . .165
C900 - C998 . . . . . . . . . . . . . . .166
1010 - 8845 . . . . . . . . . . . . .17-18
1016 - 1470 . . . . . . . . . . . . . .9, 12
1510 - 1685 . . . . . . . . . . . . .10, 12
1700 - 1800 . . . . . . . . . . . . . . .259
1810 - 1869 . . . . . . . . . . .148-156
1900 - 1985 . . . . . . . . . . . . . . . .13
2010 - 2030 . . . . . . . . . . . . . . . .19
2100 - 2155 . . . . . . . . . . . . .10, 12
3010 - 3021 . . . . . . . . . . . . . . . .17
3102 - 3124 . . . . . . . . . . . . . . . .15
3202 - 3228 . . . . . . . . . . . . . . . .21
3302 - 3324 . . . . . . . . . . . . . . . .14
3340 - 3368 . . . . . . . . . . . . . . . .20
3608 - 3649 . . . . . . . . . . . . . . .246
3866 - 3900 . . . . . . . . . . . . . . . .39
3920 - 4003 . . . . . . . . . . . . . . . .42
4006 - 4040 . . . . . . . . . . . . . . . .19
5005 - 5030 . . . . . . . . . . . . . . . .19
6010 - 8845 . . . . . . . . . . . . .17-19
8100 - 8141 . . . . . . . . . . .260-263
8200 - 8210 . . . . . . . . . . . . . . .270
8300 - 8320 . . . . . . . . . . . . . . . .41
8400 - 8444 . . . . . . . . . . .260-261
9010 . . . . . . . . . . . . . . . . . . . . .9
9200 - 9230 . . . . . . . . . . . . . . .269
9300 - 9426 . . . . . . . . . . .264-265
9500 - 9506 . . . . . . . . . . . . . . .271
9600 - 9744 . . . . . . . . . . .213-215
9745 . . . . . . . . . . . . . . . . . . . .208
9747 - 9748 . . . . . . . . . . . . . . .209
9800 - 9866 . . . . . . . . . . . . . . .216
9871 - 9898 . . . . . . . . . . . . . . .217
11010 - 11050 . . . . . . . . . . . . . . .46
12010 - 13350 . . . . . . . . . . . .66-71
14000 - 14150 . . . . . . . . . . . .27, 40
14021 - 14311 . . . . . . . . . . . .32-33
14160 - 14310 . . . . . . . . . . . .28, 40
14400 - 14490 . . . . . . . . . . . .30-31
14500 - 14533 . . . . . . . . . . . . . . .25
14600 - 14624 . . . . . . . . . . . . . . .26
15000 - 15662 . . . . . . . . . .218-226
16001 - 16011 . . . . . . . . . . . . . .243
16500 - 16664 . . . . . . . . . . . . . .164
16684 - 16710 . . . . . . . . . . . . . .272
16712 - 16798 . . . . . . . . . .273-274
17000 - 17199 . . . . . . . . . .158-161
17200 - 17619 . . . . . . . . . .250-254
17400 - 17406 . . . . . . . . . . . . . .243
18000 - 18030 . . . . . . . . . . . . . .167
18040 - 18090 . . . . . . . . . . . . . .168
C18040 - C18090 . . . . . . . . . . . . .168
20034 - 20064 . . . . . . . . . . . . . . .35
288
Part Number
20074
20500
20600
21010
24000
24417
24664
24741
31010
31110
41010
41073
41110
51010
51108
52010
53010
54010
61010
62200
63000
66000
66060
66076
66240
66264
66344
66472
66488
66568
67200
67300
67350
67501
67664
68001
71010
72010
81010
82010
91010
93010
98100
99100
101010
111430
111826
112026
112424
112636
112832
113260
113364
113468
113606
113060
113794
-
Page
20099A . . . . . . . . . . . . . .91
20533 . . . . . . . . . . . . . . .34
20666 . . . . . . . . . . . .36-37
21082 . . . . . . . . . . . . . . .47
24365 . . . . . . . . . .227-231
25432 . . . . . . . . . .232-238
. . . . . . . . . . . . . . . . . . .238
25064 . . . . . . . . . .239-242
31082 . . . . . . . . . . . . . . .50
31182 . . . . . . . . . . . . . . .48
41028 . . . . . . . . . . . . . . .51
41083 . . . . . . . . . . . . . . .52
41178 . . . . . . . . . . . . . . .49
51095 . . . . . . . . . . . . . . .56
51195 . . . . . . . . . . . . . . .53
52095 . . . . . . . . . . . . . . .54
53095 . . . . . . . . . . . . . . .63
54048 . . . . . . . . . . . . . . .55
61089 . . . . . . . . . . . . . . .57
62246 . . . . . . . . . . . . . . .58
63854 . . . . . . . . . .172-173
66058 . . . . . . . . . . .99-100
66074 . . . . . . . . . . . . . . .93
66238 . . . . . . . . . . . .94-95
66258 . . . . . . . . . . . . . .101
66348 . . . . . . . . . . . .96-98
66414 . . . . . . . . . . . . . .103
66486 . . . . . . . . . . . . . .104
66494 . . . . . . . . . . . . . .105
66590 . . . . . . . . . .106-108
67286 . . . . . . . . . . . .72-73
67336 . . . . . . . . . . .74, 245
67536 . . . . . . . . . . . .75-78
67662 . . . . . . . . . .162-163
67682 . . . . . . . . . . . . . . .41
68039 . . . . . . . . . . . . . .169
71095 . . . . . . . . . . . . . . .59
72095 . . . . . . . . . . . . . . .60
81095 . . . . . . . . . . . . . . .61
82048 . . . . . . . . . . . . . . .62
91095 . . . . . . . . . . . . . . .64
93095 . . . . . . . . . . . . . . .65
98133 . . . . . . . . . . . . . .217
99642 . . . . . . . . . .174-175
101098 . . . . . . . . . . . . .249
111824 . . . . . . . . . .180-181
112024 . . . . . . . . . . . . .179
112422 . . . . . . . . .182-183
112634 . . . . . . . . . . . . .177
112830 . . . . . . . . . . . . .188
113058 . . . . . . . . . . . . .178
113362 . . . . . . . . . . . . .184
113466 . . . . . . . . . . . . .185
113604 . . . . . . . . . . . . .186
113790 . . . . . . . . . . . . .187
113258 . . . . . . . . . . . . .189
113916 . . . . . . . . . . . . .247
Part Number
Page
113918 - 113974 . . . . . . . . . . . . . .38
114032 - 114048 . . . . . . . . . . . . .266
114050 - 114059 . . . . . . . . . .117-119
114060 - 114069 . . . . . . . . .120-122
114070 - 114079 . . . . . . . . .123-125
114080 - 114089 . . . . . . . . .126-128
114102 - 114110 . . . . . . . . . .132-134
114111 - 114127 . . . . . . . . .129-131
114122 - 114130 . . . . . . . . .135, 138
114132 - 114136 . . . . . . . . . . . . .137
114215 - 114225 . . . . . . . . .136, 138
115050 - 115062 . . . . . . . . . . . . .145
115068 - 115094 . . . . . . . . . . . . .146
115100 - 115114 . . . . . . . . . . . . .137
116050 - 116060 . . . . . . . . .139-140
116064 - 116080 . . . . . . . . .141-142
301019 A - 301056 B . . . . . . . . . . .248
400001 - 400043 . . . . . . . . . . . . .191
500001 - 500036 . . . . . . . . . . . . .192
550001 - 550037 . . . . . . . . . . . . .193
600001 - 600042 . . . . . . . . . . . . .194
650001 - 650036 . . . . . . . . . . . . .195
700001 - 750015 . . . . . . . . . . . . .196
800007 N - 800007c N . . . . . .147, 197
800000 SS - 800016a SS . . . . .147, 197
M800002 SS - M800007 SS . . . . . . . .147
M 800007 N - M800011 N . . . . . . . . . .147
800200 - 800225 . . . . . . . . . . . . .243
900005 - 900081 . . . . . . . . . . . . .170
900100 - 900476 . . . . . . . . . . .22-23
900500 - 900724 . . . . . . . . .255-258
901000 - 901404 . . . . . . . . . . .79-88
901500 - 901519 . . . . . . . . . . .43-44
901700 - 901790 . . . . . . . . . . . . .169
903000 - 903068 . . . . . . . . . . . . .244
903132 - 903201 . . . . . . . . . . . . .157
904960 - 904972 . . . . . . . . .135, 138
904961 - 904973 . . . . . . . . .136, 138
EX-1 - MEX-5 . . . . . . . . . . . . . . .197
HA 40 - HA 63 . . . . . . . . . . . . .46-88
P-1 - P-5 . . . . . . . . . . . . . . . . .46-88
RA 10 - RA 33 . . . . . . . . . . . . .46-88
SPB-4, SPH-1/8, SPHB-1/8, SP4 . . . .147
W114050 - W14086 . . . . . . . . . . . .197
T116064 - T116080 . . . . . . . .143-144

Similar documents

PPW - Snow Plow Parts 2011

PPW - Snow Plow Parts 2011 FA3770 1-F2315 1-F66783K 1-FA4466-40 1-F9828-4 1-F8439 1-F8438 1-F8437 1-F8435 1-F8291 1-F7053K 1-F5763 1-F28888 1-F27890 1-F27777 1-F27600 1-F26593 1-F4491 FA4489 FA4901 FA2846 F7904K

More information

BOWER Catalog - Norfolk Bearings and Supply Company, Inc.

BOWER Catalog - Norfolk Bearings and Supply Company, Inc. width, and load rating. Bore size for each series increases in multiples of five or more millimeters and for each bore size a selection of different narrow and wide series is available to meet the n...

More information

Tool Holder Catalog - Infoshop @ INDEX TRAUB

Tool Holder Catalog - Infoshop @ INDEX TRAUB The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors or based on technical advances.

More information

Tool Holder Catalog - Infoshop @ INDEX TRAUB

Tool Holder Catalog - Infoshop @ INDEX TRAUB The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors or based on technical advances.

More information