AE-255 NT AE-2510 NT Turret punch press

AE-255 NT AE-2510 NT Turret punch press

Turret punch press
AE-255 NT
AE-2510 NT
Pantone DS 3-5 C
CMYK 0/0/70/15
Automation
Pantone DS 36-2 C
CMYK 0/50/85/0
Lasertechnologie
Pantone DS 98-1 C
CMYK 0/100/70/10
Punching technology
Stanztechnologie
Pantone 287 C
CMYK 100/93/0/0
Software
Pantone DS 232-1 C
CMYK 100/0/0/0
Storing
Pantone DS 254-6 C
CMYK 40/0/20/0
Schneidtechnologie
Pantone DS 298-3 C
CMYK 30/0/70/0
Abkanttechnologie
Pantone DS 5-3 C
CMYK 0/15/75/0
Schweisstechnologie
Pantone DS 281-5 C
CMYK 45/0/50/30
Werkzeuge
Pantone DS 5-3 C
CMYK 0/15/75/0
VQC
Pre-Version
2082 (2082)
4165 (4100)
5120 (2560)
Dimensions of AE-2510 NT (in brackets AE-255 NT)
AE-255 NT
AE-2510 NT
Punching force
200 kN
Model
Memory capacity
Machine movement range
Axis travel (Y/X)
1270 x 1270 mm
1270 x 2500 mm
With automatic repositioning
Max. material thickness* normal steel
Standard
Option
Table loading weight
1270 x 2540 mm
1270 x 5000 mm
Positioning speed
0.01°
X-, Y- axis 80/60 m/min
Max. input value
+/- 99999.999
100 m/min
± 0.1 mm
Approach zero point
Possible features
Max. hit rate
480/min
480/min
With 25.4 mm pitch
370/min
350/min
In marking mode
900/min
900/min
Machine frame
Bridge frame
Punching drive
Servo-electric
AC servomotors
Clamping
Pneumatic
400 V/50 Hz (+ 6 %, - 10 %)
0.7 kW in standby
3.5 kW average
500 l/min including air blow
Power vacuum
Machine weight
250 l/min
12,000 kg
13,000 kg
Tel. +49 2104 2126-0
Fax +49 2104 2126-999
info@amada.de
www.amada.de
Manual or by
programming command
30/min-1
Number of punching strokes
Machine air requirement
0.01 mm
51 stations, 4 of which are rotatable
Turret rotation speed
Amada GmbH
Amada Allee 1
42781 Haan
Germany
Absolute/incremental
During rotation
± 0.07 mm
Electrical consumption
5
Input resolution
In high accuracy mode*
Electrical connection
10 MB
Number of controlled
axes
Programming
Position accuracy (without repositioning)*
Turret/table drive
AMNC-F
Brush table version up to 3.2 mm
Brush table version up to 6.4 mm
150 kg (F4) 50 kg (F1)
Simultaneous axis speed
Turret bore
Controller
Technical modifications reserved. Information on accuracy according to VDI/DGQ 3441.
Workpiece precision and material thickness to be processed are also dependent on production conditions,
material, type of workpiece, its pretreatment, table size as well as the location of the work area.
■■ Work chute 300 x 300 mm
■■ Sheet deformation sensors
■■ Lifting brush table
■■ Tool lift
■■ Air blow tool lubrication
■■ Punch slug removal
■■ Side tables
■■ Adjusting tools
■■ Punch slugs and workpiece conveyer belts,
tool grinding machine
■■ Loading and unloading systems
■■ Programming software
© Amada GmbH – AE_500-Pr_DE_EN / 10-2010/1
Technical data