TOGU EUN Tool Grinding Maschine

Pantone DS 36-2 C
CMYK 0/50/85/0
Lasertechnologie
Pantone DS 98-1 C
CMYK 0/100/70/10
Stanztechnologie
Pantone 287 C
CMYK 100/93/0/0
Software
Pantone DS 232-1 C
CMYK 100/0/0/0
Storing
Pantone DS 254-6 C
CMYK 40/0/20/0
Schneidtechnologie
Pantone DS 298-3 C
CMYK 30/0/70/0
Abkanttechnologie
Pantone DS 5-3 C
CMYK 0/15/75/0
Schweisstechnologie
Pantone DS 281-5 C
CMYK 45/0/50/30
Werkzeuge
Pantone DS 5-3 C
CMYK 0/15/75/0
VQC
Pantone 285 C
CMYK 90/43/0/10
Sägen
Pantone 320 C
CMYK 90/30/60/0
Fräsen
Pantone Warm Red C
CMYK 0/75/90/0
Drehen
Pantone 361 C
CMYK 70/0/100/0
Grinding
Schleifen
technology
Tool Grinding Maschine
TOGU EUN
1920
750
821
Technical data
www.amada-gmbh.eu/togu
TOGU-EUN
Minimum tool diameter
2 mm
Maximum tool diameter
160 mm
Maximum tool length
150 mm (three-jaw chuck)
Maximum grinding depth in mm
0.99 mm/cycle
Grinding motor infeed
240 mm
Power consumption
4.8 kVA, 400 V, 50 Hz
Motor power
Spindle motor speed
Feed motor for vertical traverse
1.5 kW, 3000 1/min
step motor 200 W, 1/2000 interval
Turntable motor
120 W, 4P
Coolant pump motor
0.26 kW, 20 l/min
Speed
Rapid feed speed
600 mm/min
Positioning speed
Grinding rate
depend on station size
0.06 mm/min (Type A) to 0.03 mm/min (Type E)
Dimension and weight
Coolant capacity
20 l
750 x 821 x 1920 mm (L x W x H)
Machine weight
Amada GmbH
Amada Allee 1
42781 Haan
Germany
Tel. +49 2104 2126-0
Fax +49 2104 2126-999
info@amada.de
www.amada.de
Technical modifications reserved. Information on accuracy according to VDI/DGQ 3441.
Workpiece precision and material thickness to be processed are also dependent on production conditions,
material, type of workpiece, its pretreatment, table size as well as the location of the work area.
450 kg
© Amada GmbH – TOGU-EUN_250-Pr_EN-DE / 10-2012/1
Machine dimension