5000 Series Voltage Detection System

w w w. m k s i n s t. c o m
Process Environment
Monitoring
Auditing, Monitoring,
and Training
Novx voltage detection system series 5000
The Novx Voltage Detection System Series 5000 is an advanced instrument for
use in electrostatic charge/electrostatic discharge (ESC/ESD) auditing, monitoring,
and training with direct interface to the Novx Data Acquisition Software and facility
monitoring systems. This instrument is used for test and analysis of human body
voltage, product and real-time equipment performance, ground integrity, and ESD
training. Use the Series 5000 with the Novx Training Light Tower to demonstrate
electrostatic charge in the manufacturing environment.
Features and Benefits
• Probe Voltage LED Array with Polarity
• Peak Hold LED Array
•Max Voltage Measured/Stored
•Non-contact Measured Proximity Input
•Measured Precise Contact
• Portable for Random Testing/Training
• LED Logarithmic Array for Voltage
•Switching Power Supplies for Decay
Testing
• Analog I/O Capabilities Standard
• Visual Aide for Cause and Effect
•Training Light Tower
• Battery Pack
• Personnel training and awareness demonstrations with real-time results.
• “Hands-on” training on ESD causes and effects of various activities.
• Real-time data capture with time and date
stamping for accurate SPC analysis.
• Data collection requires only the setting of
a few toggle switches.
Specifications
Special Features
Voltage: An optional switch enables you to set up for a ±5000V
or a ±500V full-scale instrument.
High Voltage Power Supply Switch: The optional high voltage
power supply switch may be used for charged plate decay time
testing.
Options
Training Light Tower(s): The Series 5150 (5000V) and the
Series 5160 (500V) provide a large visual display of voltage generation including polarity for use in personnel training and awareness demonstrations with real-time results. The towers are used
to provide educational support for “hands-on” training on ESD
causes and effects of various activities.
Data Acquisition: Provides real-time data capture with time and
date stamping for accurate SPC analysis. The software can be
set for data capture rates up to 32,500 measurements/second or
for alarm level data storage only, capturing data above customer
programmed alarm levels for extended life testing. The software
also provides ionization efficiency decay testing with programmable start and end-point settings for the application.
Remote Probe: Allows for real-time product performance testing
down to component pin level and real-time equipment testing for
robotics, handlers, and pick-and-place. Very high input impedance provides extremely accurate and product safe measurement information of actual voltage levels.
Specifications
Input Impedance
>100 GW
Bandwidth/Filter Off
>100 KHz
Bandwidth/Filter On
5 Hz
Input Voltage (Max)
±10 kV
Input Voltage (Max Display)
±5 kV
Accuracy
5% of Actual Measurement
Voltage Range
0V to 5000V
External Analog I/O
±5V
General
Communication
Analog
LED Displays
Peak Hold/Probe Voltage
Audible Alarms
Off, High, Low
Power Supply
International
Battery Pack
>8 Hours
Dimensions
4” H x 9” W x 11” D
Weight
3 lb
Enclosure
Stainless Steel
Human Body Applications
Probe
• Real-time body voltage measurement
• Dynamic tribocharging characteristics for wrist/footwear
product performance
Proximity
• Non-contact charge potential of body in motion
• Protective clothing/garments performance characteristics
• Station alarm of charge potential
Performance Testing Applications
Wrist-strap
• Strap performance test
• Dynamic ground loop testing (continuous and real-time)
Calibration
Heal-strap/Shoes
Instruments are shipped already calibrated and certified. Calibration must be validated annually to meet ISO certification compliance requirements.
• Performance testing
• Dynamic testing/demonstration (street footwear vs. heal
straps vs. ESD footwear)
Flooring
• Dynamic tribocharging characteristic testing
• 100% check (fast and easy)
• Ease of use for regular testing (dirt/wax breakdown)
Customer Support
Seating
Technical telephone support, custom training, and optional extended Service Agreements are all available. Contact your sales
representative for details. Specifications are subject to frequent
changes.
• Dynamic tribocharging characteristic testing (contact or
human body)
• Floor interface dynamic tribocharge testing
Pkg Materials
• Dynamic bag and package charge suppression
• Elimination testing
Workstation
• GND performance testing
• GND plane voltage differential (multiple products on a bench)
Process
• GND performance testing point-to-point
Equipment
• Charging characteristics from operator to equipment or
Tribocharging characteristics from product to equipment
IC Handler
• Dynamic “charge-on-the-fly” testing
Ionization
• Monitoring of ionization balance and charge decay testing
Environmental
• Area charge potential or AC noise/60 Hz potential
MKS, Ion Systems
1750 North Loop Road, Alameda, CA 94502
Tel: 510.217.0600 or 800.367.2452
Fax: 510.217.0484
info@ion.com
www.mksinst.com
Novx Series 5000 and Training Light Tower
DS-5000 - Ver. 1
© 2007 MKS Instruments, Inc.
All rights reserved.