2012 Kanetsune Seki Products Guide

Transcription

Proudly Made in Japan
HIGH CARBON STEEL
HIGH CARBON STEEL
KB-123
TRADITIONAL
TRADITIONAL
KB-122
KB-120 "HANA"
●OVERALL : 640mm (25.19in.)
●BLADE : 450mm (17.71in.)
●STEEL : White Steel Core
●HANDLE : Oak & Black Cord Wrapped
●SHEATH : Magnolia
KB-122 "TEN"
●BLADE : 215mm (8.47in.)
●STEEL : Blue Steel Core / Damascus 15 Layers
●HANDLE : Stingray & Leather Wrapped
●SHEATH : Magnolia / Black Laquer Finish
HIGH CARBON STEEL
HIGH CARBON STEEL
TRADITIONAL
TRADITIONAL
KB-123 "SORA"
●BLADE : 215mm (8.47in.)
●HANDLE : Stingay & Black Cord Wrapped
HIGH CARBON STEEL
LONG-SELLING
PRODUCTS
KB-124
KB-125
KB-124 "YUME MED."
KB-125 "YUME SM."
●OVERALL : KB-124 / 230mm (9.06in.)
KB-125 / 150mm (5.91in.)
●BLADE : KB-125 / 120mm (4.73in.)
KB-125 / 65mm (2.56in.)
●HANDLE & SHEATH : Magnolia
KB-127 "HOKO"
KB-128 "YOROI"
●BLADE : 200mm (7.87in.)
● STEEL : Blue Steel Core / Damascus 15 layers
●HANDLE : Oak
●BLADE : 160mm (6.30in.)
●HANDLE : Oak
HIGH CARBON STEEL
HIGH CARBON STEEL
HIGH CARBON STEEL
TRADITIONAL
KB-129 "KARI"
●BLADE : 240mm (9.45in.)
●STEEL : Blue Steel Core
●HANDLE : Oak
●SHEATH : Leather
KB-130 "RYOU"
●BLADE : 210mm (8.27in.)
●HANDLE : Oak & Leather
●SHEATH : Leather
●CLOSE OUT
1
KB-132 "TORA"
●BLADE : 150mm (5.90in.)
●HANDLE : Oak
*Tiger Engraved Blade
●COLSE OUT
www.kanetsune.com
HIGH CARBON STEEL
HIGH CARBON STEEL
TRADITIONAL
KB-138
KB-139
KB-140
KB-141
KB-133 "KIKORI"
●BLADE : 64mm (2.52in.)
(Comes With Blade Cover)
KB-138 "NATA XL."
KB-139 "NATA LG."
●OVERALL :
KB-138 / 445mm (17.52in.)
KB-139 / 410mm (16.14in.)
KB-140 / 375mm (14.76in.)
KB-141 / 345mm (13.58in.)
KB-140 "NATA MED."
KB-141 "NATA SM."
●BLADE :
KB-138 / 270mm (10.63in.)
KB-139 / 240mm (9.45in.)
KB-140 / 210mm (8.27in.)
KB-141 / 180mm (7.09in.)
HIGH CARBON STEEL
KB-142
●STEEL : SRK-8 High Carbon Steel Core
●HANDLE : Oak
●SHEATH : Leather
HIGH CARBON STEEL
SINGLE BEVEL EDGE
KB-143
KB-142 "MAKIRI LG."
●BLADE : 240mm (9.45in.)
●HANDLE : Cocobolo Wood
●SHEATH : Leather
KB-143 "MAKIRI MED."
●BLADE : 210mm (8.27in.)
●SHEATH : Leather
HIGH CARBON STEEL
KB-144 "YAMASHI"
●OVERALL：370mm (14.57in.)
●BLADE：210mm (8.27in.)
●STEEL：Blue Steel Core
●HANDLE：Oak & Cocobolo Wood
●SHEATH：Leather
HIGH CARBON STEEL
TRADITIONAL
KB-145
KB-146
KB-145 "RYOU-TAKUMI LG."
●BLADE : 240mm (9.45in.)
STEEL : Blue Steel Core / Damascus 15 Layers
●STEEL
●HANDLE : Walnut & Ebony
●SHEATH : Leather
KB-146 "RYOU-TAKUMI MED."
●BLADE : 200mm (7.87in.)
●HANDLE : Walnut & Ebony
●SHEATH : Leather
2
KB-224 "NISHIKI"
●BLADE : 120mm (4.73in.)
www.kanetsune.com
HIGH CARBON STEEL
KB-147
HIGH CARBON STEEL
NEWFOR
FOR
NEW
2012
KB-148
KB-147 "MATAGI LG"
KB-148 "MATAGI MED."
●BLADE : 230mm (9.05in.)
●HANDLE : Beech Tree Wood & Leatherr
●SHEATH : Leather
●BLADE : 195mm (7.67in.)
●HANDLE : Beech Tree Wood & Leatherr
●SHEATH : Leather
HIGH CARBON STEEL
HIGH CARBON STEEL
KB-220
KB-231 "YOH"
●BLADE : 90mm (3.54in.)
●HANDLE : Ebony
●SHEATH : Leather
●CLOSE OUT
HIGH CARBON STEEL
KB-223
KB-221
KB-222
KB-220 "KAZE"
KB-221 "HAYASHI"
●OVERALL : KB-220 / 165mm (6.50in.)
KB-221 / 170mm (6.70in.)
●BLADE : KB-220 / 65mm (2.56in.)
KB-221 / 65mm (2.56in.)
●SHEATH : Leather
KB-222 "HI"
KB-223 "YAMA"
●OVERALL : KB-222 / 180mm (7.09in.)
KB-223 / 185mm (7.28in.)
●BLADE : KB-222 / 75mm (2.95in.)
KB-223 / 80mm (3.15in.)
●SHEATH : Leather
HIGH CARBON STEEL
HIGH CARBON STEEL
KB-241 "HANE"
●STEEL：White Steel Core
●HANDLE：Cocobolo Wood
●SHEATH：Leather
HIGH CARBON STEEL
KB-233 "TSUNO"
KB-234 "TSUME"
KB-235 "KIBA"
●BLADE : 120mm (4.72in.)
●HANDLE : Paracord Wrapped
●BLADE : 120mm (4.72in.)
●BLADE : 120mm (4.72in.)
3
www.kanetsune.com
HIGH CARBON STEEL
HIGH CARBON STEEL
SKINNING
KNIFE
KB-236 "KUMA"
●BLADE : 170mm (6.69in.)
●STEEL : SKD12
●HANDLE : Rose Wood
●SHEATH : Nylon
BONING
KNIFE
KB-237 "INOSHISHI"
●OVERALL : 255mm ( 10.04in.)
●BLADE : 140mm (5.51in.)
●STEEL : SKD12
●SHEATH : Nylon
HIGH CARBON STEEL
HIGH CARBON STEEL
GUTTING
KNIFE
KB-238 "SHIKA"
●BLADE : 140mm (5.51in.)
●STEEL : SKD12
●SHEATH : Nylon
KB-242 "SABI"
●STEEL：White Steel Core / Damascus 15 Layers
●HANDLE：Cocobolo Wood
●SHEATH：Leather
HIGH CARBON STEEL
SLICING
KNIFE
KB-239 "KIJI"
●BLADE : 150mm (5.90in.)
●STEEL : SKD12
●SHEATH : Nylon
HIGH CARBON STEEL
KB-209
HIGH CARBON STEEL
HIGH CARBON STEEL
TRADITIONAL
TRADITIONAL
KB-243 "YUMI"
●OVERALL： 200mm (7.87in.)
●BLADE： 100mm (3.94in.)
●STEEL：White Steel Core / Damascus 15 Layers
●HANDLE：Paracord Wrapped
●SHEATH：Leather
●CLOSE OUT
HIGH CARBON STEEL
TRADITIONAL
KB-210
KB-209 "SHINOBI MED"
KB-210 "SHINOBI SM"
●OVERALL : KB-209 / 255mm(10.04in.)
KB-210 / 220mm(8.66in.)
BLADE : KB-209 / 125mm(4.92in.)
●BLADE
KB-210 / 95mm(3.74in.)
●HANDLE : Oak / Black cord wrapped
KB-247 "ENCHO"
●OVERALL ：260mm (10.24in.)
●BLADE ：135mm (5.31in.)
●STEEL ：Blue Steel Core / Damascus 15 Layers
●HANDLE ：Oak
●SHEATH ：Magnolia
4
KB-250 "SABAKI-2"
●BLADE :115mm (4.52in.)
●STEEL : SRK-8 High Carbon Steel Core
●HANDLE : Oak
●SHEATH : Leather
www.kanetsune.com
HIGH CARBON STEEL
HIGH CARBON STEEL
LONG-SELLING
PRODUCTS
KB-251 "SHUN-2 LG."
●BLADE : 115mm (4.53in.)
●HANDLE : Oak
LONG-SELLING
PRODUCTS
KB-252 "SHUN-2 MED."
●BLADE : 90mm (3.55in.)
●HANDLE : Oak
HIGH CARBON STEEL
HIGH CARBON STEEL
TRADITIONAL
TRADITIONAL
KB-248 "SAZANAMI / MIGAKI"
●STEEL： SRK-8 High Carbon Steel Core
/ Polished Tsuchime-finish
●HANDLE：Oak
●SHEATH：Magnolia
KB-249 "SAZANAMI / BOKASHI"
●STEEL： SRK-8 High Carbon Steel Core
/ Matt Gray finish
●HANDLE：Oak
●SHEATH：Magnolia
HIGH CARBON STEEL
STAINLESS STEEL
NEW FOR
2012
NEW FOR
2012
KB-502 "MAKOTO"
●BLADE : 78mm (3.07in.)
●STEEL : VG-10 Stainless Steel Core
/ Damascus 15 Layers
●SHEATH : Leather
KB-503 "YOSHI"
●BLADE : 72mm (2.83in.)
●SHEATH : (None)
5
HIGH CARBON STEEL
LONG-SELLING
PRODUCTS
KB-253 "SHUN-2 SM."
●BLADE : 70mm (2.76in.)
●HANDLE : Oak
STAINLESS STEEL
TRADITIONAL
KB-501 "KAGAYAKI"
●BLADE : 120mm (4.7in.)
●STEEL : VG-10 Stainless Steel Core
●HANDLE : Oak / Cherry Wood Skin Wrapped
●SHEATH : Magnolia / Cherry Wood Skin Wrapped
●CLOSE OUT
HIGH CARBON STEEL
NEW FOR
2012
KB-504 "GO"
●BLADE : 70mm (2.76in.)
●SHEATH : (None)
www.kanetsune.com
KANETSUNE ACCESSORIES & MAINTENACE
●LENGTH :90cm(35.43in)～160cm (63.99in.)
●WIDTH : 30mm (1.18in)
(※knives are not included)
KB-302 "OBI" SLING BLACK
(※knife is not included)
KB-303 "OBI" SLING OD
This is a long-lasting
maintenance cloth and an
ideal choice for cleaning
and wiping off
fingerprints from the metal
surface.
SIZE : 26×
×18cm
(10.2×
×7in)
In case the blades of your
knives are covered with rust,
you can clean them by using
Northman RUST GUARD. It can
be also used for other metal
products.
(140g)
Tsubaki (Camellia oil) is the
rust preventing oil that has
been used for protecting
traditional Japanese swords.
It is an ideal choice for
traditional Japanese swords,
field and kitchen knives.
(100ml)
KB-401 TSUBAKI OIL
KB-402 RUST CLEAN
KB-403 BIRDY CHAMOIS
STEEL USED IN KANETSUNE KNIVES
C
Carbon
Cr
Mn
P
Chromium Manganese Phoshorus
Si
Silicon
S
Sulfur
Ni
Nickel
Molybdenum
Mo
V
Vanadium
W
Tungsten
HRC
Shirogami 2 (White Steel)
1.05 - 1.15
-
0.20 - 0.30
≦0.025
0.10 - 0.20
≦0.004
-
-
-
-
60 - 61
Aogami 2 (Blue Steel)
1.05 - 1.15
0.20 - 0.50
0.20 - 0.30
≦0.025
0.10 - 0.20
≦0.004
-
-
-
1.00 - 1.50
61 - 62
Aogami Super Steel
1.40 - 1.50
0.30 - 0.50
0.20 - 0.30
≦0.025
0.10 - 0.20
≦0.004
-
-
-
2.00 - 2.50
62 - 63
SRK-8 Steel
0.95 - 1.10
0.20 - 0.50
0.25
≦0.030
0.10 - 0.20
0.003
-
-
-
-
60 - 61
SKD-12 Steel
0.95 - 1.05
4.80 - 5.50
0.40 - 0.80
≦0.03
0.10 - 0.40
≦0.03
-
-
-
-
60 - 61
Aichi AUS-10 (10A) Stainless Steel
0.95 - 1.10
13.00 - 14.50
≦0.50
0.040
≦1.00
0.03
≦0.49
0.10 - 0.30
0.10 - 0.25
-
59 - 60
Takefu Super Gold Ⅱ Powdered Steel
1.25 - 1.45
14.00 - 16.00
-
-
-
-
-
-
-
-
61 - 62
VG-10
0.95 - 1.05
14.50 - 15.50
0.30 - 0.50
≦0.03
≦0.35
≦0.03
≦0.25
0.80 - 1.20
0.25 - 0.35
-
60 - 61
0.95
13.50
0.70
≦0.025
0.40
≦0.010
-
-
-
-
60 - 61
Sandvik 19C27
Hitachi Shirogami
(White Steel)
Hitachi Aogami
(Blue Steel)
Hitachi Aogami Super
(Super Blue Steel)
SRK-8
High Carbon Steel
SKD-12
High Carbon Steel
Aichi AUS-10
Stainless Steel
Takefu Super Gold Ⅱ
Powdered Steel
This is refined carbon steel that does not contain any ingredients and can be used for making
high-grade Hocho (Japanese kitchen knives), hatchets, axes, sickles and chisels.
This is made by adding chromium and tungsten to Shirogami (White Steel) that makes the material
more durable and provides corrosion resistance and mostly used for making high-grade Hocho
(kitchen knives) and outdoor knives.
This is the highest grade steel in their product line that contains high percentage of carbon,
chrome to increease hardness, improviding edge retention and corrosion resistance.
SRK-8 is a improved version of Hitachi's refined carbon steel, Shirogami (White steel) and it's
tougher and durable than Shirogami steel and holds an edge well as Blue steel.
Hitachi Metals Ltd. is one of top manufactures of
high grade metal and the company is also well
known as a manufacture of its “Yasuki Hagane”
YSS (Yasuki Speciality Steel) for cutlery industries.
Yasuki Hagane steel has been produced in their
plant in Japan where the high quality iron sand
has been produced for making traditional
Japanese swords since ancient times.
These are three main premium grade high
carbon steels, Shirogami, Aogami and Aogami
Super that have been used for making Japanese
field & kitchen knives. Hitachi metal is also
known as the manufacture of high grade
premium stainless steel, ATS-34 and ZDP-189.
SKD-12 steel is classed as cold work tool steel and the steel has high carbon content. It is mostly
used for making dies due to its high wear resistance.
Japanese made stainless steel pdoruced by Aichi foundry. AUS-10 has roughly the same carbon
content as 440C but with slightly less chromium therefore it should be a bit less rust resistant but
tougher than 440C.
Super Gold is a premium Japanese powder metal steel developed by Takefu special steel that
creates the razor sharp edge, and can be hardened into a range of RC 62 on the Rockwell
Hardness scale translating into superlative sharpness, wear resistance and the ability to maintain
very sharp edge. The steel contains 1.45% of carbon and 16% of chromium that offers high
corrosion resistance.
Thank you for your Support for
the earthquake & Tsunami victims in Japan.
KANETSUNE
PROUDLY
MADE IN
JAPAN
KITASHO COMPANY LTD.
VG-10
Stainless Steel
Sandvik 19C27
Stainless Steel
VG-10 is a stainless steel with a high carbon content that is manufactured by Takefu Special Steel
in Japan. VG-10 is quite unique in it's composition using Molybdenum, Cobalt and Vanadium in the
mixture. VG-10 is typically hardened to anywhere from RC 58-61.
Sandvik 19C27 is a highest grade steel among their stainless chromium steel series. The steel has
high percentage of carbon content and is mostly used for high quality industrial knife applications.
6
5-1-11,Sakae-machi, Seki City
Gifu Pref.,JAPAN 501-3253
E-mail : info@kt-kitasho.co.jp
TEL ： 81-575-24-1211
FAX ： 81-575-24-1210
www.kanetsune.com
www.kanetsune.com

2012 Kanetsune Seki Products Guide

Transcription

Similar documents

View Purchase with Purchase Booklet

2014 Sandal Catalog

- Excalibur

Walter`s Party Supplies

Insert Overview

Otter Ashigaru