RT2600 - TuningMania.com.br
Transcription
RT2600 - TuningMania.com.br
2000’ THUNDER BIBLE 1 Table of content page 2 Amps line page 3 Speakers line page 4 THE AMPS Power and fonctions page 6 RT2120 page 7 RT2600 page 8 RT4240 page 9 TH102 page 10 TH152 page 11 TH302 page 12 TH204 page 13 TH304 page 14 TH405 page 15 TH250D page 16 TH500D page 17 TH1000D page 18 Class ”D” in action page 19 RT2600 in action page 20 THE BOXES T410 page 22 T412 page 23 T410x3 page 24 T610 page 25 T612 page 26 T610x3 page 27 THE SUBWOOFERS Recommanded enclosures page 29 ALDS technologie page 30 T484 page 31 T4104 page 33 T4124 page 35 T4154 page 37 T684 page 39 T6104 page 41 T6124 page 43 T6154 page 45 T8104 page 47 T8124 page 49 T8154 page 51 TABLE OF CONTENT THE WINNING SYSTEM THE COMPO SPEAKERS Work better together page 64 Recommanded enclosures page 65 page 66 T3.4e page 54 Power and fonctions T3.5e page 55 Class ”D” in action page 67 T3.6e page 56 RT2600 in action page 68 THE COAX SPEAKERS SYSTEM #1 page 69 3521e page 58 SYSTEM #2 page 70 4022e page 59 SYSTEM #3 page 71 5222e page 60 SYSTEM #4 page 72 6522e page 61 SYSTEM #5 page 73 6923e page 62 SYSTEM #6 page 74 2 TH1000D TH102 2x55w 1x2000w TH204 4x55w TH304 TH500D TH152 1x1000w 2x75w TH250D TH302 TH405 1x500w 2x150w 4x60+200w 4x75w RT2120 RT2600 RT4240 2x60w 2x300w 4x55w 3 T484 T4104 T4124 T4154 T410x3 T410 T412 T684 T6104 T6124 T6154 T610x3 T610 T612 LSX1 T8104 T8154 T8124 4022e 3521e LSX2 T3.5 5222e T3.4 T3.6 LSB1 6522e 4 6923e THE AMPS 5 Power 2Ω - 12,5 V Power bridged 12,5 V Power 4 Ω - 14,4 V Power 2 Ω - 14,4 V Power 1 x 200 W bridged 14,4 V Power port EBC inputs High level remote Automatic x-over Low pass x-over High pass POWER AND FONCTIONS 4 Ω - 12,5 V 2 x 100 W Frequency 85 Hz 2 x 55 W 18dB/oct 1 x 120 W 1 x 750 W 18dB/oct 2 x 60 W 2 x 375 W YES YES 2 x 40 W 2 x 200 W YES YES RT2120 1 x 600 W 2 x 200 W inside T-shirt YES 85 Hz 2 x 300 W 4 x 100 W 50 - 200 Hz 18dB/oct 2 x 200 W 4 x 55 W 12dB/oct 18dB/oct RT2600 2 x 120 W 24dB/oct 85 Hz 4 x 60 W YES 18dB/oct 4 x 45 W YES 18dB/oct RT4240 1 x 250 W YES 2 x 125 W 50 - 200 Hz 2 x 65 W 12dB/oct 1 x 100 W 24dB/oct 2 x 50 W YES 2 x 25 W YES THUNDER102 1 x 325 W YES 2 x 165 W 50 - 200 Hz 2 x 90 W 12dB/oct 1 x 150 W 24dB/oct 2 x 75 W YES 2 x 37,5 W YES THUNDER152 YES 1 x 425 W 1 x 300 W 2 x 212 W 2 x 150 W 2 x 120 W 2 x 75 W YES THUNDER302 50 - 200 Hz 4 x 65 W 12dB/oct 2 x 100 W YES 24dB/oct 4 x 50 W 50 - 200 Hz YES 2 x 250 W 4 x 25 W YES 24dB/oct 50 - 200 Hz 4 x 125 W THUNDER204 4 x 165 W 2x250+300W YES 24dB/oct YES 4 x 90 W 4x125+300W YES YES YES 50 - 200 Hz 2 x 150 W 4x65+150W YES YES 50 - 200 Hz 12dB/oct 4 x 75 W 2x100+200W 1 x 350 W YES 24dB/oct 24dB/oct 4 x 37,5 W 4x50+200W 1 x 200 W 1 x 775 W YES 2 x 325 W THUNDER304 4x25+100W 1 x 250 W 1 x 450 W 1 x 1500 W YES THUNDER405 1 x 125 W 1 x 500 W 1 x 850 W 50 - 200 Hz THUNDER250D 1 x 250 W 1 x 1000 W 12dB/oct THUNDER500D 1 x 500 W 24dB/oct THUNDER1000D 6 RT2120 2 CHANNEL AMP SPECIFICATIONS : IHF Power : 2 2 1 2 2 1 RMS Power : x x x x x x 100 W 55 W 200 W 60 W 40 W 120 W @2Ω @4Ω @4Ω @2Ω @4Ω @4Ω 14V 14V 14V 12V 12V 12V X-over : Low pass or High pass at 85Hz, 18dB/Oct Signal/noise ratio : >110 dB Frequency response : 20Hz - 20kHz (±0,25dB) Thunder EQ variable from 0 to +18 dB at 40 Hz High level inputs with automatic remote Line out Dimensions : 18,4 x 22,8 x 5 cm ▲ THUNDER SHEET INCLUDED IN EVERY AMP - POWER CHEKED AT 200W You must read this born certificate to understand that every amp deliver sometimes twice the official power ▲ 18DB/OCT ACTIVE LOW PASS OR HIGH PASS X-OVER AT 85HZ For any kind of application, very fast sloop for the best subwoofers or the best speakers (MTX !) ▲ LINE OUT FOR THE NEXT AMP You don’t need any shit ”Y” to feed your next amp ▲ HIGH LEVEL INPUTS WITH COLOR CODED HARNESS It works with all kind of system, even with the original head units. It’s great and highly flexible ! ▲ AUTOMATIC REMOTE WHEN USED WITH HIGH LEVEL INPUTS You don’t need to look for a remote cable or any shit switch, turn on and off are automatic ▲ THUNDER EQ : VARIABLE BASS BOOST FROM 0 TO +18DB CENTERED AT 40HZ to shake the subs or the front speakers, if they still need it... (ATTENTION, DO NOT ABUSE OF ▲ PWM MOSFET THUNDER EQ, SOME SPEAKERS DON’T APRECIATE. NOT MTX REGULATED POWER SUPPLY WITH GIANT MOSFETS FOR SHURE (RT2600 For maximum stability, reliability and sound quality ▲ POWER STAGES WITH MOSFET (V-FET) For dynamite dynamic. For sound quality, MOSFETs are very close to tube in term of sound ! ▲ 4 VOLTS COMPATIBLE ON THE RCA LINES To be compatible with every type of source ▲ ISO-FEET NYLON DESIGNED MOUNTING FEETS To avoid ground looping and for a better look ▲ AVANCED COMPUTERISED PROTECTION CIRCUIT For maximum safe power and protection ▲ IT’S A MTX AMP, BUILT WITH QUALITY COMPONENTS IN THE For the quality, check the nominations (AT2L, Auto sound award...) 7 USA !) ONE’S) RT2600 ”THE MONSTER” 2 CHANNEL AMP SPECIFICATIONS : IHF Power : 2 2 1 2 2 1 RMS Power : x x x x x x 300 200 600 375 200 750 W W W W W W @2Ω @4Ω @4Ω @2Ω @4Ω @4Ω 14V 14V 14V 12V 12V 12V X-over : Low pass or High pass at 85Hz, 18dB/Oct Signal/noise ratio : >110 dB Frequency response : 20Hz - 20kHz (±0,25dB) Thunder EQ variable from 0 to +18 dB at 40 Hz Line out Dimensions : 33,6 x 22,8 x 5 cm ▲ THUNDER SHEET INCLUDED IN EVERY AMP - POWER CHEKED AT 200W You must read this born certificate to understand that every amp deliver sometimes twice the official power ▲ HE IS TH2300’S BROTHER... DESIGNED TO PLAY LOUD IN BRIDGED MODE UNDER 4Ω It a monster, on every bench it produce more than 1000W, use it carefully with the T610x3 for example ▲ 18DB/OCT ACTIVE LOW PASS OR HIGH PASS X-OVER AT 85HZ For any kind of application, very fast sloop for the best subwoofers or the best strong speakers (MTX !) ▲ LINE OUT FOR THE NEXT AMP You don’t need any shit ”Y” to feed your next amp ▲ THUNDER EQ : VARIABLE BASS BOOST FROM 0 TO +18DB CENTERED AT 40HZ to shake the subs or the front speakers, if they still need it... (ATTENTION, DO NOT ABUSE OF ▲ PWM MOSFET THUNDER EQ, SOME SPEAKERS DON’T APRECIATE. NOT MTX REGULATED POWER SUPPLY WITH GIANT MOSFETS FOR SHURE (RT2600 For maximum stability, reliability and sound quality ▲ POWER STAGES WITH MOSFET (V-FET) For dynamite dynamic. For sound quality, MOSFETs are very close to tube in term of sound ! ▲ 4 VOLTS COMPATIBLE ON THE RCA LINES To be compatible with every type of source ▲ ISO-FEET NYLON DESIGNED MOUNTING FEETS To avoid ground looping and for a better look ▲ AVANCED COMPUTERISED PROTECTION CIRCUIT For maximum safe power and protection ▲ IT’S A MTX AMP, BUILT WITH QUALITY COMPONENTS IN THE For the quality, check the nominations (AT2L, Auto sound award...) 8 USA !) ONE’S) RT4240 4 CHANNEL AMP SPECIFICATIONS : IHF Power : 4 4 2 4 4 2 RMS Power : x x x x x x 100 W 55 W 200 W 60 W 45 W 120 W @2Ω @4Ω @4Ω @2Ω @4Ω @4Ω 14V 14V 14V 12V 12V 12V X-over : Low pass or High pass at 85Hz, 18dB/Oct (only high pass on the front) Signal/noise ratio : >110 dB Frequency response : 20Hz - 20kHz (±0,25dB) Thunder EQ variable from 0 to +18 dB at 40 Hz High level inputs with automatic remote Line out Dimensions : 28,6 x 22,8 x 5 cm ▲ THUNDER SHEET INCLUDED IN EVERY AMP - POWER CHEKED AT 2 X 200W You must read this born certificate to understand that every amp deliver sometimes twice the official power ▲ 18DB/OCT LOW PASS OR HIGH PASS X-OVER AT 85HZ (FRONT : ONLY HIGH PASS) For any kind of application, very flexible, very fast sloop for the best subwoofer or the best speakers (MTX !) ▲ LINE OUT FOR THE NEXT AMP You don’t need any shit ”Y” to feed your next amp ▲ HIGH LEVEL INPUTS WITH COLOR CODED HARNESS It works with all kind of system, even with the original head units. It’s great and highly flexible ! ▲ AUTOMATIC REMOTE WHEN USED WITH HIGH LEVEL INPUTS You don’t need to look for a remote cable or any shit switch, turn on and off are automatic ▲ THUNDER EQ : VARIABLE BASS BOOST FROM 0 TO +18DB CENTERED AT 40HZ to shake the subs or the front speakers, if they still need it... (ATTENTION, ▲ PARALLEL DO NOT ABUSE OF THUNDER EQ, SOME SPEAKERS DON’T APRECIATE. NOT MTX !) FOR SHURE INPUT SWITCH ALLOWS YOU FEED THE AMP WITH ONLY ONE PAIR OF RCA You don’t need any shit ”Y” to feed the entire amp ▲ PWM MOSFET REGULATED POWER SUPPLY WITH GIANT MOSFETS (RT2600 For maximum stability, reliability and sound quality ▲ POWER STAGES WITH MOSFET (V-FET) For dynamite dynamic. For sound quality, MOSFETs are very close to tube in term of sound ! ▲ 4 VOLTS COMPATIBLE ON THE RCA LINES To be compatible with every type of source ▲ ISO-FEET NYLON DESIGNED MOUNTING FEETS To avoid ground looping and for a better look ▲ AVANCED COMPUTERISED PROTECTION CIRCUIT For maximum safe power and protection ▲ IT’S A MTX AMP, BUILT WITH QUALITY COMPONENTS IN THE For the quality, check the nominations (AT2L, Auto sound award...) 9 USA ONE’S) TH102 2 CHANNEL AMP SPECIFICATIONS : IHF Power : INCLUDED 2 2 1 2 2 1 RMS Power : x x x x x x 125 W 65 W 250 W 50 W 25 W 100 W @2Ω @4Ω @4Ω @2Ω @4Ω @4Ω 14V 14V 14V 12V 12V 12V X-over : variable from 40 to 200Hz, 24dB/Oct low pass, 12dB/Oct high pass Line out : 24dB low pass and 12dB high pass Signal/noise ratio : >110 dB Frequency response : 20Hz - 20kHz (±0,25dB) Thunder EQ variable from 0 to +18 dB at 40 Hz High level inputs with automatic remote Dimensions : 20,9 x 22,8 x 5 cm ▲ THUNDER SHEET INCLUDED IN EVERY AMP - POWER CHEKED AT 250W You must read this born certificate to understand that every amp deliver sometimes twice the official power ▲ X-OVER : VARIABLE FROM 40 TO 200HZ, 24DB LOW PASS, 12DB HIGH PASS Total flexibility, fast slope for the subs to keep transparency, slow slope for the speakers to preserve bass ▲ LINE OUT WITH X-OVER, 24DB LOW PASS, 12DB HIGH PASS You don’t need any shit ”Y” to feed your next amp ▲ HIGH LEVEL INPUTS WITH COLOR CODED HARNESS It works with all kind of system, even with the original head units. It’s great and highly flexible ! ▲ AUTOMATIC REMOTE WHEN USED WITH HIGH LEVEL INPUTS You don’t need to look for a remote cable or any shit switch, turn on and off are automatic ▲ THUNDER EQ : VARIABLE BASS BOOST FROM 0 TO +18DB CENTERED AT 40HZ to shake the subs or the front speakers, if they still need it... (ATTENTION, DO NOT ABUSE OF ▲ PWM MOSFET THUNDER EQ, SOME SPEAKERS DON’T APRECIATE. NOT MTX FOR SHURE REGULATED POWER SUPPLY WITH GIANT MOSFETS For maximum stability, reliability and sound quality ▲ POWER STAGES WITH MOSFET (V-FET) For dynamite dynamic. For sound quality, MOSFETs are very close to tube in term of sound ! ▲ 8 VOLTS COMPATIBLE ON THE RCA LINES To be compatible with every type of component ▲ ISO-FEET NYLON DESIGNED MOUNTING FEETS To avoid ground looping and for a better look ▲ DUAL ADJUSTABLE INPUT SENSITIVITY CONTROLS For precise gain matching and for centered image ▲ IT’S A MTX AMP, BUILT WITH QUALITY COMPONENTS IN THE For the quality, check the nominations (AT2L, Auto sound award...) 10 USA !) TH152 2 CHANNEL AMP SPECIFICATIONS : INCLUDED IHF Power : 2 2 1 2 2 1 RMS Power : x x x x x x 165 W 90 W 325 W 75 W 37,5 W 150 W @2Ω @4Ω @4Ω @2Ω @4Ω @4Ω 14V 14V 14V 12V 12V 12V X-over : variable from 40 to 200Hz, 24dB/Oct low pass, 12dB/Oct high pass Line out : 24dB low pass and 12dB high pass Signal/noise ratio : >110 dB Frequency response : 20Hz - 20kHz (±0,25dB) Thunder EQ variable from 0 to +18 dB at 40 Hz High level inputs with automatic remote Dimensions : 23,5 x 22,8 x 5 cm ▲ THUNDER SHEET INCLUDED IN EVERY AMP - POWER CHEKED AT 325W You must read this born certificate to understand that every amp deliver sometimes twice the official power ▲ X-OVER : VARIABLE FROM 40 TO 200HZ, 24DB LOW PASS, 12DB HIGH PASS Total flexibility, fast slope for the subs to keep transparency, slow slope for the speakers to preserve bass ▲ LINE OUT WITH X-OVER, 24DB LOW PASS, 12DB HIGH PASS You don’t need any shit ”Y” to feed your next amp ▲ HIGH LEVEL INPUTS WITH COLOR CODED HARNESS It works with all kind of system, even with the original head units. It’s great and highly flexible ! ▲ AUTOMATIC REMOTE WHEN USED WITH HIGH LEVEL INPUTS You don’t need to look for a remote cable or any shit switch, turn on and off are automatic ▲ THUNDER EQ : VARIABLE BASS BOOST FROM 0 TO +18DB CENTERED AT 40HZ to shake the subs or the front speakers, if they still need it... (ATTENTION, DO NOT ABUSE OF ▲ PWM MOSFET THUNDER EQ, SOME SPEAKERS DON’T APRECIATE. NOT MTX FOR SHURE REGULATED POWER SUPPLY WITH GIANT MOSFETS For maximum stability, reliability and sound quality ▲ POWER STAGES WITH MOSFET (V-FET) For dynamite dynamic. For sound quality, MOSFETs are very close to tube in term of sound ! ▲ 8 VOLTS COMPATIBLE ON THE RCA LINES To be compatible with every type of component ▲ ISO-FEET NYLON DESIGNED MOUNTING FEETS To avoid ground looping and for a better look ▲ DUAL ADJUSTABLE INPUT SENSITIVITY CONTROLS For precise gain matching and for centered image ▲ IT’S A MTX AMP, BUILT WITH QUALITY COMPONENTS IN THE For the quality, check the nominations (AT2L, Auto sound award...) 11 USA !) TH302 2 CHANNEL AMP SPECIFICATIONS : INCLUDED IHF Power : 2 2 1 2 2 1 RMS Power : x x x x x x 212 W 120 W 425 W 150 W 75 W 300 W @2Ω @4Ω @4Ω @2Ω @4Ω @4Ω 14V 14V 14V 12V 12V 12V X-over : variable from 40 to 200Hz, 24dB/Oct low pass, 12dB/Oct high pass Line out : 24dB low pass and 12dB high pass Signal/noise ratio : >110 dB Frequency response : 20Hz - 20kHz (±0,25dB) Thunder EQ variable from 0 to +18 dB at 40 Hz High level inputs with automatic remote EBC port (optional subwoofer remote control) Dimensions : 23,5 x 22,8 x 5 cm ▲ THUNDER - POWER SHEET INCLUDED IN EVERY AMP CHEKED AT 325W You must read this born certificate to understand that every amp deliver sometimes twice the official power ▲ X-OVER : VARIABLE FROM 40 TO 200HZ, 24DB LOW PASS, 12DB HIGH PASS Total flexibility, fast slope for the subs to keep transparency, slow slope for the speakers to preserve bass ▲ LINE OUT WITH X-OVER, 24DB LOW PASS, 12DB HIGH PASS You don’t need any shit ”Y” to feed your next amp ▲ HIGH LEVEL INPUTS WITH COLOR CODED HARNESS It works with all kind of system, even with the original head units. It’s great and highly flexible ! ▲ AUTOMATIC REMOTE WHEN USED WITH HIGH LEVEL INPUTS You don’t need to look for a remote cable or any shit switch, turn on and off are automatic ▲ THUNDER EQ : VARIABLE BASS BOOST FROM 0 TO +18DB CENTERED AT 40HZ to shake the subs or the front speakers, if they still need it... (ATTENTION, ▲ EBC READY DO NOT ABUSE OF THUNDER EQ, SOME SPEAKERS DON’T APRECIATE. (EXTERNAL BASS CONTROL) NOT MTX FOR SHURE !) COMMANDE DU SUBWOOFER DÉPORTÉE For a fine tuning of the sub from your seat with a simple knob, nothing to see with the level on your head-unit ▲ PWM MOSFET REGULATED POWER SUPPLY WITH GIANT MOSFETS For maximum stability, reliability and sound quality ▲ POWER STAGES WITH MOSFET (V-FET) For dynamite dynamic. For sound quality, MOSFETs are very close to tube in term of sound ! ▲ 8 VOLTS COMPATIBLE ON THE RCA LINES To be compatible with every type of component ▲ DUAL ADJUSTABLE INPUT SENSITIVITY CONTROLS For precise gain matching and for centered image ▲ IT’S A MTX AMP, BUILT WITH QUALITY COMPONENTS IN THE For the quality, check the nominations (AT2L, Auto sound award...) 12 USA TH204 4 CHANNEL AMP INCLUDED SPECIFICATIONS : IHF Power : 4 4 2 4 4 2 RMS Power : x x x x x x 125 W 65 W 250 W 50 W 25 W 100 W @2Ω @4Ω @4Ω @2Ω @4Ω @4Ω 14V 14V 14V 12V 12V 12V X-over : variable from 40 to 200Hz, 24dB/Oct low pass, 12dB/Oct high pass Line out : 24dB low pass and 12dB high pass Signal/noise ratio : >110 dB Frequency response : 20Hz - 20kHz (±0,25dB) Thunder EQ variable from 0 to +18 dB at 40 Hz High level inputs with automatic remote Dimensions : 31,1 x 22,8 x 5 cm ▲ THUNDER SHEET INCLUDED IN EVERY AMP - POWER CHEKED AT 2 X 250W You must read this born certificate to understand that every amp deliver sometimes twice the official power ▲ X-OVER : VARIABLE FROM 40 TO 200HZ, 24DB LOW PASS, 12DB HIGH PASS Total flexibility, fast slope for the subs to keep transparency, slow slope for the speakers to preserve bass ▲ LINE OUT You don’t need any shit ”Y” to feed your next amp ▲ THUNDER EQ : VARIABLE BASS BOOST FROM 0 TO +18DB CENTERED AT 40HZ to shake the subs or the front speakers, if they still need it... (ATTENTION, ▲ PARALLEL DO NOT ABUSE OF THUNDER EQ, SOME SPEAKERS DON’T APRECIATE. NOT MTX FOR SHURE INPUT SWITCH ALLOWS YOU FEED THE AMP WITH ONLY ONE PAIR OF You don’t need any shit ”Y” to feed the entire amp ▲ PWM MOSFET REGULATED POWER SUPPLY WITH GIANT MOSFETS For maximum stability, reliability and sound quality ▲ POWER STAGES WITH MOSFET (V-FET) For dynamite dynamic. For sound quality, MOSFETs are very close to tube in term of sound ! ▲ 8 VOLTS COMPATIBLE ON THE RCA LINES To be compatible with every type of component ▲ ISO-FEET NYLON DESIGNED MOUNTING FEETS To avoid ground looping and for a better look ▲ IT’S A MTX AMP, BUILT WITH QUALITY COMPONENTS IN THE For the quality, check the nominations (AT2L, Auto sound award...) 13 USA !) RCA TH304 4 CHANNEL AMP INCLUDED SPECIFICATIONS : IHF Power : 4 4 2 4 4 2 RMS Power : x x x x x x 165 W 90 W 325 W 75 W 37,5 W 150 W @2Ω @4Ω @4Ω @2Ω @4Ω @4Ω 14V 14V 14V 12V 12V 12V X-over : variable from 40 to 200Hz, 24dB/Oct low pass, 12dB/Oct high pass Line out : 24dB low pass and 12dB high pass Signal/noise ratio : >110 dB Frequency response : 20Hz - 20kHz (±0,25dB) Thunder EQ variable from 0 to +18 dB at 40 Hz High level inputs with automatic remote Dimensions : 38,7 x 22,8 x 5 cm ▲ THUNDER SHEET INCLUDED IN EVERY AMP - POWER CHEKED AT 2 X 250W You must read this born certificate to understand that every amp deliver sometimes twice the official power ▲ X-OVER : VARIABLE FROM 40 TO 200HZ, 24DB LOW PASS, 12DB HIGH PASS Total flexibility, fast slope for the subs to keep transparency, slow slope for the speakers to preserve bass ▲ LINE OUT You don’t need any shit ”Y” to feed your next amp ▲ THUNDER EQ : VARIABLE BASS BOOST FROM 0 TO +18DB CENTERED AT 40HZ to shake the subs or the front speakers, if they still need it... (ATTENTION, ▲ PARALLEL DO NOT ABUSE OF THUNDER EQ, SOME SPEAKERS DON’T APRECIATE. NOT MTX FOR SHURE INPUT SWITCH ALLOWS YOU FEED THE AMP WITH ONLY ONE PAIR OF You don’t need any shit ”Y” to feed the entire amp ▲ PWM MOSFET REGULATED POWER SUPPLY WITH GIANT MOSFETS For maximum stability, reliability and sound quality ▲ POWER STAGES WITH MOSFET (V-FET) For dynamite dynamic. For sound quality, MOSFETs are very close to tube in term of sound ! ▲ 8 VOLTS COMPATIBLE ON THE RCA LINES To be compatible with every type of component ▲ ISO-FEET NYLON DESIGNED MOUNTING FEETS To avoid ground looping and for a better look ▲ IT’S A MTX AMP, BUILT WITH QUALITY COMPONENTS IN THE For the quality, check the nominations (AT2L, Auto sound award...) 14 USA !) RCA TH405 5 CHANNEL AMP SPECIFICATIONS : INCLUDED IHF Power : 4 4 4 4 RMS Power : x x x x 125 W + 400W 65 W + 200W 50 W + 200W 25 W + 100W @2Ω @4Ω @2Ω @4Ω 14V 14V 12V 12V X-over : Front: HP 18dB/oct variable from 50 to 200Hz, withfrequency multiplier 40X (2000 to 8000Hz) Rear : HP 18dB/oct variable from 50 to 200Hz Subwoofer : LP 18dB/oct variable from 50 to 200Hz Signal/noise ratio : >110 dB Frequency response : 20Hz - 20kHz (±0,25dB) EBC port (optional subwoofer remote control) Thunder EQ variable from 0 to +18 dB at 40 Hz Dimensions : 41,3 x 22,8 x 5 cm ▲ 5 CHANNELS MEANS ONE AMP FOR A COMPLETE AND EFFICIENT SYSTEM 4 channels for the front & rear, one specialy designed channel for the sub(s) and a flexible x-over, all in one ! ▲ CLASS ”D” SUB CHANNEL 2Ω COMPATIBLE WITH EBC PORT (OPTIONAL) For maximum power, stability, reliability and sound quality ▲ THUNDER SHEET INCLUDED IN EVERY AMP - POWER CHEKED AT 2 325W X You must read this born certificate to understand that every amp deliver sometimes twice the official power ▲ 18DB/OCT X-OVER, HIGH PASS FOR FRONT WITH 40X FREQUENCY MULTIPLIER, HIGH PASS FOR REAR, LOW PASS FOR THE SUB CHANNEL, VARIABLE FROM 200HZ, 50 TO For the best flexibilty ever ▲ THUNDER EQ VARIABLE BASS BOOST 0 TO +18DB CENTERED AT 40HZ Available for each channel. To shake the subs or the front speakers, if they still need it... (ATTENTION, DO NOT ABUSE OF ▲ PWM MOSFET THUNDER EQ, SOME SPEAKERS DON’T APRECIATE. NOT MTX REGULATED POWER SUPPLY WITH GIANT MOSFETS !) FOR SHURE (TH2300 ONE’S) For maximum stability, reliability and sound quality ▲ POWER STAGES WITH MOSFET (V-FET) For dynamite dynamic. For sound quality, MOSFETs are very close to tube in term of sound ! ▲ 8 VOLTS COMPATIBLE ON THE RCA LINES, AND NOT ONLY 4 ! To be compatible with every tipe of source ▲ PARALLEL INPUT SWITCH ALLOWS YOU FEED THE AMP WITH ONLY ONE PAIR OF You don’t need any shit ”Y” to feed the entire amp ▲ ISO-FEET NYLON DESIGNED MOUNTING FEETS To avoid ground looping and for a better look ▲ IT’S A MTX AMP, BUILT WITH QUALITY COMPONENTS IN THE For the quality, check the nominations (AT2L, Auto sound award...) 15 USA RCA TH250D 1 CHANNEL AMP INCLUDED SPECIFICATIONS : IHF Power : 1 1 1 1 RMS Power : x x x x 350 200 250 125 W W W W @2Ω @4Ω @2Ω @4Ω 14V 14V 12V 12V X-over : variable from 40 to 200Hz, 24dB/Oct low pass Line out Signal/noise ratio : >100 dB Frequency response : 20Hz - 200Hz (±0,25dB) Thunder EQ variable from 0 to +18 dB at 40 Hz High level inputs with automatic remote EBC port (optional subwoofer remote control) Dimensions : 20,9 x 22,8 x 5 cm ▲ IT’S A ”CLASS D” 85% AMPLIFIER WITH EFFICIENCY !!! MEANS LOTS OF POWER If 100W input, 85W will go for the speakers. Class A/B is only 50% efficient means 50W for the peakers ▲ IT’S A MONO BLOC AMPLIFIER TO BE COMPATIBLE WITH TWO 4Ω SUBS With a single channel, you don’t have any impedance problem, because you don’t need to bridge the amp. ▲ THUNDER SHEET INCLUDED IN EVERY AMP - POWER CHECKED AT 500W You must read this born certificate to understand that every amp deliver sometimes twice the official power ▲ LOW PASS X-OVER VARIBLE FROM 40 TO 200HZ All you need to do is to tune your subwoofer with the best flexibilty ever ▲ LINE OUT TO CHAIN THE SUB AMPS You don’t need any shit ”Y” to feed multiple sub amps ▲ HIGH LEVEL INPUTS WITH COLOR CODED HARNESS AND AUTOMATIC REMOTE It works with all systems, even with the original head units. No remote cable or any shit switch, all automatic ▲ EBC READY (EXTERNAL BASS CONTROL) SUBWOOFER REMOTE CONTROL For a fine tuning of the sub from your seat with a simple knob, nothing to see with the level on your head-unit ▲ THUNDER EQ VARIABLE BASS BOOST 0 TO +18DB CENTERED AT 45HZ to shake the subs, if they still need it... (ATTENTION, DO NOT ABUSE OF ▲ PWM MOSFET THUNDER EQ, SOME SPEAKERS DON’T APRECIATE. NOT MTX FOR SHURE REGULATED POWER SUPPLY For maximum stability, reliability, sound quality ▲ POWER STAGE WITH MOSFET (V-FET) For dynamite dynamic. For sound quality, MOSFETs are very close to tube in term of sound ! ▲ 8 VOLTS COMPATIBLE ON THE RCA LINES To be compatible with every tipe of source ▲ IT’S A MTX AMP, BUILT WITH QUALITY COMPONENTS IN THE For the quality, check the nominations (AT2L, Auto sound award...) 16 USA !) TH500D 1 CHANNEL AMP INCLUDED SPECIFICATIONS : IHF Power : 1 1 1 1 RMS Power : x x x x 750 450 500 250 W W W W @2Ω @4Ω @2Ω @4Ω 14V 14V 12V 12V X-over : variable from 40 to 200Hz, 24dB/Oct low pass Line out Signal/noise ratio : >100 dB Frequency response : 20Hz - 200Hz (±0,25dB) Thunder EQ variable from 0 to +18 dB at 40 Hz High level inputs with automatic remote EBC port (optional subwoofer remote control) Dimensions : 20,9 x 22,8 x 5 cm ▲ IT’S A ”CLASS D” 85% AMPLIFIER WITH EFFICIENCY !!! MEANS LOTS OF POWER If 100W input, 85W will go for the speakers. Class A/B is only 50% efficient means 50W for the peakers ▲ IT’S A MONO BLOC AMPLIFIER TO BE COMPATIBLE WITH TWO 4Ω SUBS With a single channel, you don’t have any impedance problem, because you don’t need to bridge the amp. ▲ THUNDER SHEET INCLUDED IN EVERY AMP - POWER CHECKED AT 1000W You must read this born certificate to understand that every amp deliver sometimes twice the official power ▲ LOW PASS X-OVER VARIBLE FROM 40 TO 200HZ All you need to do is to tune your subwoofer with the best flexibilty ever ▲ LINE OUT TO CHAIN THE SUB AMPS You don’t need any shit ”Y” to feed multiple sub amps ▲ HIGH LEVEL INPUTS WITH COLOR CODED HARNESS AND AUTOMATIC REMOTE It works with all systems, even with the original head units. No remote cable or any shit switch, all automatic ▲ EBC READY (EXTERNAL BASS CONTROL) SUBWOOFER REMOTE CONTROL For a fine tuning of the sub from your seat with a simple knob, nothing to see with the level on your head-unit ▲ THUNDER EQ VARIABLE BASS BOOST 0 TO +18DB CENTERED AT 45HZ to shake the subs, if they still need it... (ATTENTION, DO NOT ABUSE OF ▲ PWM MOSFET THUNDER EQ, SOME SPEAKERS DON’T APRECIATE. NOT MTX FOR SHURE REGULATED POWER SUPPLY For maximum stability, reliability, sound quality ▲ POWER STAGE WITH MOSFET (V-FET) For dynamite dynamic. For sound quality, MOSFETs are very close to tube in term of sound ! ▲ 8 VOLTS COMPATIBLE ON THE RCA LINES To be compatible with every tipe of source ▲ IT’S A MTX AMP, BUILT WITH QUALITY COMPONENTS IN THE For the quality, check the nominations (AT2L, Auto sound award...) 17 USA !) TH1000D ”ABSOLUTE POWER” 1 CHANNEL AMP INCLUDED SPECIFICATIONS : IHF Power : 1 1 1 1 RMS Power : x x x x 1500 W 850 W 1000 W 500 W @2Ω @4Ω @2Ω @4Ω 14V 14V 12V 12V X-over : variable from 40 to 200Hz, 24dB/Oct low pass. Line out Signal/noise ratio : >100 dB Frequency response : 20Hz - 200Hz (±0,25dB) Thunder EQ variable from 0 to +18 dB at 40 Hz High level inputs with automatic remote EBC port (optional subwoofer remote control) Dimensions : 20,9 x 22,8 x 5 cm ▲ IT’S A ”CLASS D” 85% AMPLIFIER WITH EFFICIENCY !!! MEANS LOTS OF POWER If 100W input, 85W will go for the speakers. Class A/B is only 50% efficient means 50W for the peakers ▲ IT’S A MONO BLOC AMPLIFIER TO BE COMPATIBLE WITH TWO 4Ω SUBS With a single channel, you don’t have any impedance problem, because you don’t need to bridge the amp. ▲ THUNDER SHEET INCLUDED IN EVERY AMP - POWER CHECKED AT 2000W You must read this born certificate to understand that every amp deliver sometimes twice the official power ▲ LOW PASS X-OVER VARIBLE FROM 40 TO 200HZ All you need to do is to tune your subwoofer with the best flexibilty ever ▲ LINE OUT TO CHAIN THE SUB AMPS You don’t need any shit ”Y” to feed multiple sub amps ▲ EBC READY (EXTERNAL BASS CONTROL) SUBWOOFER REMOTE CONTROL For a fine tuning of the sub from your seat with a simple knob, nothing to see with the level on your head-unit ▲ THUNDER EQ VARIABLE BASS BOOST 0 TO +18DB CENTERED AT 45HZ to shake the subs, if they still need it... (ATTENTION, DO NOT ABUSE OF ▲ PWM MOSFET THUNDER EQ, SOME SPEAKERS DON’T APRECIATE. NOT MTX FOR SHURE REGULATED POWER SUPPLY For maximum stability, reliability, sound quality ▲ POWER STAGE WITH MOSFET (V-FET) For dynamite dynamic. For sound quality, MOSFETs are very close to tube in term of sound ! ▲ 8 VOLTS COMPATIBLE ON THE RCA LINES To be compatible with every tipe of source ▲ IT’S A MTX AMP, BUILT WITH QUALITY COMPONENTS IN THE For the quality, check the nominations (AT2L, Auto sound award...) 18 USA !) CLASS ”D” AMPS IN ACTION TH250D TH500D TH1000D 4Ω 4Ω TWO 4Ω THE 8Ω 8Ω 8Ω FOUR 8Ω SUBS IN PARALLEL ON ONE CLASS 8Ω AMP WORKS UNDER THE 12Ω 12Ω 12Ω 12Ω SUBS IN PARALLEL ON ONE CLASS 2Ω 12Ω SIX 12Ω SUBS IN PARALLEL ”D” 12Ω ”D” AMP WORKS UNDER ON ONE CLASS 2Ω THE ”D” AMP WORKS UNDER 2Ω COMPATIBILITY COMPATIBILITY COMPATIBILITY TH250D -> T4000 TH500D -> T6000 OR T8000 TH1000D -> T8000 TH250D -> T4000 TH500D -> T4000 OR T6000 TH1000D -> T6000 OR T8000 TH250D -> T4000 TH500D -> T4000 OR T6000 TH1000D -> T6000 OR T8000 The MTX Class ”D” amps are mono bloc 2Ω compatible. The double speaker connector is wired in parallel Maximum power will be achived under 2Ω. But they can work under 4Ω. 19 THE RT2600 IN ACTION (APPLICABLE ON EVERY 2 CHANNEL AMP) 12Ω 8Ω 12Ω 4Ω 4Ω 4Ω 4Ω 4Ω 8Ω 12Ω THREE 12Ω SUBS IN PARALLEL ON ONE RT2600 BRIDGED. TWO 8Ω SUBS IN PARALLEL ON ONE RT2600 BRIDGED. ONE 4Ω SUBS IN PARALLEL ON ONE FOUR 4Ω SUBS IN PARALLEL TWO BY RT2600 BRIDGED. TWO ON EACH CHANNEL THE RT2600 THE AMP WORKS UNDER EQUAL 4Ω BRIDGED 2Ω STEREO. THE AMP WORKS UNDER EQUAL 4Ω BRIDGED 2Ω STEREO. THE AMP WORKS UNDER EQUAL 4Ω BRIDGED 2Ω STEREO. WORKS IN STEREO MODE THE T410X3/T610X3 WAY OF WORKING T6000 T8000 AND COMPATIBLE T4000 T6000 AND COMPATIBLE ATTENTION THIS DIAGRAM AMP WORKS UNDER CAN EQUAL 2Ω STEREO 4Ω BRIDGED. BE DANGEROUS FOR THE SUB, BECAUSE THERE IS NOT MANY T4000 T6000 SUB WHO CAN FACE COMPATIBLE A RT2600 GED T8000 COMPATIBLE 20 BRID- AND THE BOXES 21 T410 Ø25cm SEALED ENCLOSURE SPECIFICATIONS : RMS Power Maximum Power Impedance Frequency response Sensitivity Diameter Dimensions ▲ MAXIMUM POWER 200 W 400 W 4Ω 57 Hz - 150 Hz 88 dB 25 cm (10”) 30,7 x 30,2 x 40,3 cm (h x w x d) 400W... 200w RMS, to face an 200RMS amp (RT2120, TH102...) ▲ PLAY MUCH LOUDER THAN A SUB ON THE REAR CHELF He handle with him his resonance box, it always play in every car ▲ ASYMMETRICAL LINEAR DRIVE SYSTEM (ALDS) IS USED ON THIS SUB This is the technology behind every MTX sub : extended pole pice and flat progressive spider ▲ HIGH EFFICIENCY (88DB FOR 1 WATT AT 1 METRE) You don’t need an expensive powerfull amp to shake the trees ▲ THUNDER 4000 SUBWOOFER SPECIALY DESIGNED FOR SEALED BOXES He’s playing in a box specialy designed for him, this is no strange stuff.... ▲ QUALITY MADE IN USA - 4 FACTORIES AROUND THE STATES MTX is leader on the box market since 15 years, in fact MTX invented boxes for cars ▲ 70° TRAPEZOIDAL SHAPE TO FIT 80% OF THE VEHICULES for very easy installation ▲ FAST CONNECTORS TO REMOVE THE BOX IN A VERY SHORT TIME Usefull ! ▲ EXTENDED LIFE FOR THE SUB BECAUSE OF THE ENCLOSURE Better working in a very well adapted box if you want to play loud 22 T412 Ø30cm SEALED ENCLOSURE SPECIFICATIONS : RMS Power Maximum Power Impedance Frequency response Sensitivity Diameter Dimensions ▲ MAXIMUM POWER 200 W 400 W 4Ω 49 Hz - 150 Hz 89,8 dB 30 cm (12”) 36,5 x 39,7 x 45,7 cm (h x w x d) 400W... 200w RMS, to face an 200RMS amp (RT2120, TH102...) ▲ PLAY MUCH LOUDER THAN A SUB ON THE REAR CHELF He handle with him his resonance box, it always play in every car ▲ ASYMMETRICAL LINEAR DRIVE SYSTEM (ALDS) IS USED ON THIS SUB This is the technology behind every MTX sub : extended pole pice and flat progressive spider ▲ HIGH EFFICIENCY (89,8DB FOR 1 WATT AT 1 METRE) You don’t need an expensive powerfull amp to shake the trees ▲ THUNDER 4000 SUBWOOFER SPECIALY DESIGNED FOR SEALED BOXES He’s playing in a box specialy designed for him, this is no strange stuff.... ▲ QUALITY MADE IN USA - 4 FACTORIES AROUND THE STATES MTX is leader on the box market since 15 years, in fact MTX invented boxes for cars ▲ 70° TRAPEZOIDAL SHAPE TO FIT 80% OF THE VEHICULES for very easy installation ▲ FAST CONNECTORS TO REMOVE THE BOX IN A VERY SHORT TIME Usefull ! ▲ EXTENDED LIFE FOR THE SUB BECAUSE OF THE ENCLOSURE Better working in a very well adapted box if you want to play loud 23 T410x3 Ø25CM TRISUB SEALED ENCLOSURE SPECIFICATIONS : RMS Power Maximum Power Impedance Frequency response Sensitivity Diameter Dimensions ▲ MAXIMUM POWER 1200W... DESIGNED FOR 600 W 1200 W 4Ω 58 Hz - 150 Hz 92,6 dB 3 x 25 cm (10”) 33,7 x 89,5 x 36,8 cm (h x w x d) SPL 600w RMS, to face an 600RMS amp (RT2600, TH302...) ▲ PLAY MUCH LOUDER THAN A SUB ON THE REAR CHELF He handle with him his resonance box, it always play in every car ▲ ASYMMETRICAL LINEAR DRIVE SYSTEM (ALDS) IS USED ON THIS SUB This is the technology behind every MTX sub : extended pole pice and flat progressive spider ▲ HIGH EFFICIENCY (92,6DB FOR 1 WATT AT 1 METRE) For very high SPL readings ▲ THUNDER 4000 SUBWOOFER SPECIALY DESIGNED FOR SEALED BOXES He’s playing in a box specialy designed for him, this is no strange stuff.... ▲ QUALITY MADE IN USA - 4 FACTORIES AROUND THE STATES MTX is leader on the box market since 15 years, in fact MTX invented boxes for cars ▲ 70° TRAPEZOIDAL SHAPE TO FIT 80% OF THE VEHICULES for very easy installation ▲ FAST CONNECTORS TO REMOVE THE BOX IN A VERY SHORT TIME Usefull ! ▲ EXTENDED LIFE FOR THE SUB BECAUSE OF THE ENCLOSURE Better working in a very well adapted box if you want to play loud 24 T610 Ø25cm SEALED ENCLOSURE SPECIFICATIONS : RMS Power Maximum Power Impedance Frequency response Sensitivity Diameter Dimensions ▲ MAXIMUM POWER 250 W 500 W 4Ω 44 Hz - 150 Hz 85,5 dB 25 cm (10”) 31,1 x 30,5 x 40,3 cm (h x w x d) 500W... 250w RMS, to face an 250RMS amp (TH152...) ▲ PLAY MUCH LOUDER THAN A SUB ON THE REAR CHELF He handle with him his resonance box, it always play in every car ▲ ASYMMETRICAL LINEAR DRIVE SYSTEM (ALDS) IS USED ON THIS SUB This is the technology behind every MTX sub : extended pole pice and flat progressive spider ▲ THUNDER 6000 SUBWOOFER SPECIALY DESIGNED FOR SEALED BOXES He’s playing in a box specialy designed for him, this is no strange stuff.... ▲ QUALITY MADE IN USA - 4 FACTORIES AROUND THE STATES MTX is leader on the box market since 15 years, in fact MTX invented boxes for cars ▲ 70° TRAPEZOIDAL SHAPE TO FIT 80% OF THE VEHICULES for very easy installation ▲ FAST CONNECTORS TO REMOVE THE BOX IN A VERY SHORT TIME Usefull ! ▲ EXTENDED LIFE FOR THE SUB BECAUSE OF THE ENCLOSURE Better working in a very well adapted box if you want to play loud 25 T610 Ø25cm SEALED ENCLOSURE SPECIFICATIONS : RMS Power Maximum Power Impedance Frequency response Sensitivity Diameter Dimensions ▲ MAXIMUM POWER 250 W 500 W 4Ω 41 Hz - 150 Hz 87,1 dB 25 cm (10”) 36,2 x 39,7 x 45,4 cm (h x w x d) 500W... 250w RMS, to face an 250RMS amp (TH152...) ▲ PLAY MUCH LOUDER THAN A SUB ON THE REAR CHELF He handle with him his resonance box, it always play in every car ▲ ASYMMETRICAL LINEAR DRIVE SYSTEM (ALDS) IS USED ON THIS SUB This is the technology behind every MTX sub : extended pole pice and flat progressive spider ▲ THUNDER 6000 SUBWOOFER SPECIALY DESIGNED FOR SEALED BOXES He’s playing in a box specialy designed for him, this is no strange stuff.... ▲ QUALITY MADE IN USA - 4 FACTORIES AROUND THE STATES MTX is leader on the box market since 15 years, in fact MTX invented boxes for cars ▲ 70° TRAPEZOIDAL SHAPE TO FIT 80% OF THE VEHICULES for very easy installation ▲ FAST CONNECTORS TO REMOVE THE BOX IN A VERY SHORT TIME Usefull ! ▲ EXTENDED LIFE FOR THE SUB BECAUSE OF THE ENCLOSURE Better working in a very well adapted box if you want to play loud 26 T610x3 Ø25cm TRISUB SEALED ENCLOSURE SPECIFICATIONS : RMS Power Maximum Power Impedance Frequency response Sensitivity Diameter Dimensions ▲ MAXIMUM POWER 1500W... DESIGNED FOR 750 W 1500 W 4Ω 46 Hz - 150 Hz 90,0 dB 3 x 25 cm (10”) 33,7 x 89,5 x 36,8 cm (h x w x d) SPL 750w RMS, to face an 750RMS amp (RT2600...) ▲ PLAY MUCH LOUDER THAN A SUB ON THE REAR CHELF He handle with him his resonance box, it always play in every car ▲ ASYMMETRICAL LINEAR DRIVE SYSTEM (ALDS) IS USED ON THIS SUB This is the technology behind every MTX sub : extended pole pice and flat progressive spider ▲ THUNDER 6000 SUBWOOFER SPECIALY DESIGNED FOR SEALED BOXES He’s playing in a box specialy designed for him, this is no strange stuff.... ▲ QUALITY MADE IN USA - 4 FACTORIES AROUND THE STATES MTX is leader on the box market since 15 years, in fact MTX invented boxes for cars ▲ 70° TRAPEZOIDAL SHAPE TO FIT 80% OF THE VEHICULES for very easy installation ▲ FAST CONNECTORS TO REMOVE THE BOX IN A VERY SHORT TIME Usefull ! ▲ EXTENDED LIFE FOR THE SUB BECAUSE OF THE ENCLOSURE Better working in a very well adapted box if you want to play loud 27 THE SUBWOOFERS 28 THE 2000 RECOMMENDED ENCLOSURES T4104 T6104 T8104 14 to 28 LITERS SEALED T4124 T6124 T8124 28 TO 56 LITERS SEALED T4154 T6154 T8154 56 TO 85 LITERS SEALED 42 TO 70 LITERS SEALED 35 TO 63 LITERS SEALED 29 SMALL SEALED ENCLOSURE Flat progressive spider ;;; ;;; ;; ; Extended pole piece ALDS Is the technologie behind every MTX subwoofer This technologie is composed with two parts : Flat progressive spider The spider is very smooth at the beginning when the music is quiet and when we need a maximum of details. It alows to listen everything with a very fast sub. But when the music hits, the cone is moving more and the suspension becomes harder. It alows to put a lot of power. The sub keeps the controle, the distorsion remain low. This spider is very polyvalent for many tipes of differents music. The spider becomes harder with the increasement of displacement of the cone The voice coil cannot go out of the gap because of the internal guide Extended pole piece Thanks to the extended pole pice, the magnetic flux in the gap is more homogenius, more symetrical. She’s increasing the linerity and the performances of the sub. The second role of the extended pole pice is to be a rigid guide for the voice coil support when people use the sub over limits (All the time !). The complete cone can not go out of the gap because of the guide in the center (ex pole piece!). It is one of the best protection during SPL contests... The magnetic flux is more symetrical in the gap 30 T484 Ø20cm SUBWOOFER SPECIFICATIONS RMS Power Maximum Power Free air resonance Vas Qts Qes Qms Re Sd Xmax (one way) Frequency response Impedance SPL Depth ▲ MAXIMUM POWER 100 W 200 W 39,5 Hz 43,2 liters 0,66 0,70 13,18 2,88 Ω 0,0216 m2 5,3 mm 43 - 150 Hz 4Ω 87,5 dB 8,89 cm 200W 100w RMS, to face an 100W RMS amp (RT2120, TH102...) ▲ ASYMMETRICAL LINEAR DRIVE SYSTEM (ALDS) IS USED ON THIS SUB This is the technology behind every MTX sub : extended pole pice and flat progressive spider ▲ HE WORKS VERY WELL IN A 10 LITERS SEALED BOX OR IN 14 LITERS VENTED BOX Like that your wife cannot say that there is no room left in the trunk ! He He... ▲ IT’S A MTX THUNDER 4000 DESINGED FOR SEALED OR VENTED ENCLOSURE He’s very flexible for lots of different boxes. See next page ▲ Ø26 MM APICAL VOICE COIL For a high power handling and reliability ▲ NEW HIGH END PLASTIC GASQUET Absolutely beautiful view from the front (normal position) ▲ VENTED POLE PICE For a high power handling and reliability ▲ STRONTIUM MAGNET For a high power handling and efficiency ▲ MACHINE TURNED PLATES For technical appearance ▲ QUALITY MADE IN USA - 4 FACTORIES AROUND THE STATES MTX is leader on the sub market since 15 years, the quality control is very difficult 31 T484 TECHNICAL DATAS SEALED ENCLOSURES Enclosure volume F-3 Ripple Qtc Net volume Driver volume Excursion limited SPL Excursion limited power 10,6 liters 67 Hz 0,00 dB 1,23 9,6 liters 1litre 109 dB 100 Watts 14,2 liters 61 Hz 0,01 dB 1,11 13,2 liters 1litre 107 dB 79 Watts 17,7 liters 57 Hz 0,01 dB 1,03 16,7 liters 1litre 106 dB 65 Watts 21,2 liters 53 Hz 0,01 dB 0,98 20,3 liters 1litre 105 dB 56 Watts 24,8 liters 53 Hz 0,00 dB 0,94 23,8 liters 1litre 104 dB 50 Watts 14,2 liters 5,1 x 20,3 cm 63 Hz 45 Hz 0,29 dB 12,7 liters 1litre 0,54 liters 107 dB 45 Watts 17,7 liters 5,1 x 22,9 cm 54 Hz 38 Hz 0,37 dB 16,2 liters 1litre 0,5 liters 109 dB 100 Watts 21,2 liters 5,1 x 21cm 49 Hz 35 Hz 0,42 dB 19,8 liters 1litre 0,5 liters 109 dB 96 Watts 24,8 liters 5,1 x 22,9 cm 48 Hz 31 Hz 0,32 dB 23,3 liters 1litre 0,5 liters 106 dB 80 Watts 28,3 liters 5,1 x 22,9 cm 46 Hz 29 Hz 0,26 dB 26,8 liters 1litre 0,5 liters 106 dB 71 Watts 23,2 liters 43-129 Hz 1,3 dB 7,6 x 17,1 cm 76 Hz 0,70 dB 11,2 liters 10,3 liters 1litre 0,8 liters 106 dB 57 Watts 26,6 liters 38-124 Hz 0,0 dB 7,6 x 21,0 cm 70 Hz 0,73 dB 14,3 liters 10,3 liters 1litre 1,0 liters 103 dB 44 Watts 32,0 liters 33-119 Hz -1,4 dB 7,6 x 26,0 cm 64 Hz 0,75 dB 19,4 liters 10,3 liters 1litre 1,3 liters 101 dB 33 Watts 31,2 liters 44-110 Hz 2,6 dB 7,6 x 13,3 cm 70 Hz 0,14 dB 14,7 liters 14,9 liters 1litre 0,6 liters 106 dB 49 Watts 36,2 liters 39-104 Hz 1,3 dB 7,6 x 16,5 cm 64 Hz 0,14 dB 19,6 liters 14,9 liters 1litre 0,8 liters 103 dB 37 Watts 45,3 liters 34-99 Hz -0,2 dB 7,6 x 21,0 cm 58 Hz 0,15 dB 28,5 liters 14,9 liters 1litre 1,0 liters 101 dB 28 Watts VENTED ENCLOSURES Enclosure volume Vent dimensions F-3 Tuning frequency Ripple Net volume Driver volume Vent volume Excursion limited SPL Excursion limited power SINGLE REFLEX BAND PASS ENCLOSURE (S=0,5) Enclosure volume Band pass Band pass gain Vent dimensions Tuning frequency Ripple Sealed volume Vented volume Driver volume Vent volume Excursion limited SPL Excursion limited power 19,5 liters 54-140 Hz 3,5 dB 7,6 x 11,4 cm 87 Hz 0,65 dB 7,6 liters 10,3 liters 1litre 0,5 liters 110 dB 87 Watts 21,0 liters 48-135 Hz 2,5 dB 7,6 x 14,0 cm 82 Hz 0,68 dB 9,1 liters 10,3 liters 1litre 0,6 liters 108 dB 71 Watts SINGLE REFLEX BAND PASS ENCLOSURE (S=0,6) Enclosure volume Band pass Band pass gain Vent dimensions Tuning frequency Ripple Sealed volume Vented volume Driver volume Vent volume Excursion limited SPL Excursion limited power 25,8 liters 52-120 Hz 4,8 dB 7,6 x 8,3 cm 80 Hz 0,12 dB 9,5 liters 14,9 liters 1litre 0,3 liters 110 dB 75 Watts 28,0 liters 49-115 Hz 3,8 dB 7,6 x 10,2 cm 75 Hz 0,13 dB 11,6 liters 14,9 liters 1litre 0,4 liters 108 dB 61 Watts 32 T4104 Ø25cm SUBWOOFER SPECIFICATIONS RMS Power Maximum Power Free air resonance Vas Qts Qes Qms Re Sd Xmax (one way) Frequency response Impedance SPL Depth ▲ MAXIMUM POWER 200 W 400 W 39,5 Hz 37,7 liters 0,66 0,70 10,02 3,19 Ω 0,0360 m2 9,4 mm 39 - 150 Hz 4Ω 88,0 dB 12,2 cm 400W 200w RMS, to face an 200W RMS amp (RT2120, TH102...) ▲ ASYMMETRICAL LINEAR DRIVE SYSTEM (ALDS) IS USED ON THIS SUB This is the technology behind every MTX sub : extended pole pice and flat progressive spider ▲ HE WORKS VERY WELL IN A 14 LITERS SEALED BOX Like that your wife cannot say that there is no room left in the trunk ! He He... ▲ IT’S A MTX THUNDER 4000 DESINGED FOR SEALED OR VENTED ENCLOSURE He’s very flexible for lots of different boxes. See netx page ▲ Ø38 MM APICAL VOICE COIL For a high power handling and reliability ▲ NEW HIGH END PLASTIC GASQUET Absolutely beautiful view from the front (normal position) ▲ VENTED POLE PICE For a high power handling and reliability ▲ STRONTIUM MAGNET For a high power handling and efficiency ▲ MACHINE TURNED PLATES For technical appearance ▲ QUALITY MADE IN USA - 4 FACTORIES AROUND THE STATES MTX is leader on the sub market since 15 years, the quality control is very difficult 33