Open the brochure
Transcription
Open the brochure
TECHNICAL GUIDE FOR HOISTS Dimensions (SI/50Hz) SI SUPDOCTGQDIM3-0.ORD 23.12.2011 - - - 080674 10.10.2010 Boehringer Straße 4 68307 Mannheim Germany tel +49(0)621 789-900 fax +49(0)621 789 90-100 Info@swfkrantechnik.com www.swfkrantechnik.com English 30/12/2011 1 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. Original instructions SUPDOCTGQDIM30100-0 PS02505 23.12.2011 SWF Krantechnik GmbH Postbox 310410 68264 Mannheim Germany TECHNICAL GUIDE FOR HOISTS Table of contents 1 CHANGE HISTORY ........................................................................................................................... 6 LOW HEADROOM TROLLEY .................................................................................................................. 8 2 LOW HEADROOM HOIST NB, REEVING: 02.................................................................................... 9 3 LOW HEADROOM HOIST NB, REEVING: 04.................................................................................. 11 4 LOW HEADROOM HOIST NC, REEVING: 02 ................................................................................. 13 5 LOW HEADROOM HOIST NC, REEVING: 04 ................................................................................. 15 6 LOW HEADROOM HOIST NC, REEVING: 04, EXTENDED LOAD .................................................. 17 7 LOW HEADROOM HOIST NC, REEVING: A2 ................................................................................. 19 8 LOW HEADROOM HOIST NC, REEVING: A4 ................................................................................. 21 9 LOW HEADROOM HOIST ND, REEVING: 02 ................................................................................. 23 10 LOW HEADROOM HOIST ND, REEVING: 04 .............................................................................. 25 11 LOW HEADROOM HOIST ND, REEVING: 04, EXTENDED LOAD .............................................. 27 DOUBLE GIRDER TROLLEY, MEDIUM ................................................................................................ 29 12 DOUBLE GIRDER HOIST NB, REEVING: 02............................................................................... 31 13 DOUBLE GIRDER HOIST NB, REEVING: 04............................................................................... 33 14 DOUBLE GIRDER HOIST NC, REEVING: 02............................................................................... 35 15 DOUBLE GIRDER HOIST NC, REEVING: 04............................................................................... 37 16 DOUBLE GIRDER HOIST ND, REEVING: 02............................................................................... 39 17 DOUBLE GIRDER HOIST ND, REEVING: 04............................................................................... 41 18 DOUBLE GIRDER HOIST ND, REEVING: 06............................................................................... 43 19 DOUBLE GIRDER HOIST ND, REEVING: 08............................................................................... 45 20 DOUBLE GIRDER HOIST ND, REEVING: 22............................................................................... 47 21 DOUBLE GIRDER HOIST ND, REEVING: 24............................................................................... 49 22 DOUBLE GIRDER HOIST ND, REEVING: 26............................................................................... 51 23 DOUBLE GIRDER HOIST ND, REEVING: 28............................................................................... 53 24 DOUBLE GIRDER HOIST NE, REEVING: 02............................................................................... 55 25 DOUBLE GIRDER HOIST NE, REEVING: 04............................................................................... 57 26 DOUBLE GIRDER HOIST NE, REEVING: 06............................................................................... 59 27 DOUBLE GIRDER HOIST NE, REEVING: 08............................................................................... 61 28 DOUBLE GIRDER HOIST NE, REEVING: 22............................................................................... 63 29 DOUBLE GIRDER HOIST NE, REEVING: 24............................................................................... 65 30 DOUBLE GIRDER HOIST NE, REEVING: 26............................................................................... 67 31 DOUBLE GIRDER HOIST NE, REEVING: 28............................................................................... 69 32 DOUBLE GIRDER HOIST NF, REEVING: 22 ............................................................................... 71 33 DOUBLE GIRDER HOIST NF, REEVING: 24 ............................................................................... 73 34 DOUBLE GIRDER HOIST NF, REEVING: 26 ............................................................................... 75 35 DOUBLE GIRDER HOIST NF, REEVING: 28 ............................................................................... 77 36 TWO HOIST TROLLEY ND 04 + NC 02 ....................................................................................... 79 37 TWO HOIST TROLLEY ND 04 + NC 04 ....................................................................................... 81 38 TWO HOIST TROLLEY NE 04 + NC 02 ....................................................................................... 83 English 30/12/2011 2 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 39 TWO HOIST TROLLEY NE 04 + NC 04 ....................................................................................... 85 40 TWO HOIST TROLLEY NE 04 + ND 02 ....................................................................................... 87 41 TWO HOIST TROLLEY NE 04 + ND 04 ....................................................................................... 89 42 TWO HOIST TROLLEY NE 06 + NC 04 ....................................................................................... 91 43 TWO HOIST TROLLEY NE 06 + ND 04 ....................................................................................... 93 44 TWO HOIST TROLLEY NF 24 + NC 04 ....................................................................................... 95 45 TWO HOIST TROLLEY NF 24 + ND 02 ....................................................................................... 97 46 TWO HOIST TROLLEY NF 24 + ND 04 ....................................................................................... 99 47 TWO HOIST TROLLEY NF 24 + NE 04 ..................................................................................... 101 48 TWO HOIST TROLLEY NF 26 + NC 04 ..................................................................................... 103 49 TWO HOIST TROLLEY NF 26 + ND 04 ..................................................................................... 105 50 TWO HOIST TROLLEY NF 26 + NE 04 ..................................................................................... 107 DOUBLE GIRDER TROLLEY, HIGH ................................................................................................... 109 51 HIGH DOUBLE GIRDER HOIST NB, REEVING: 02 .................................................................. 111 52 HIGH DOUBLE GIRDER HOIST NB, REEVING: 04 .................................................................. 113 53 HIGH DOUBLE GIRDER HOIST NC, REEVING: 02 .................................................................. 115 54 HIGH DOUBLE GIRDER HOIST NC, REEVING: 04 .................................................................. 117 55 HIGH DOUBLE GIRDER HOIST ND, REEVING: 02 .................................................................. 119 56 HIGH DOUBLE GIRDER HOIST ND, REEVING: 04 .................................................................. 121 57 HIGH DOUBLE GIRDER HOIST ND, REEVING: 06 .................................................................. 123 58 HIGH DOUBLE GIRDER HOIST ND, REEVING: 08 .................................................................. 125 59 HIGH DOUBLE GIRDER HOIST ND, REEVING: 22 .................................................................. 127 60 HIGH DOUBLE GIRDER HOIST ND, REEVING: 24 .................................................................. 129 61 HIGH DOUBLE GIRDER HOIST ND, REEVING: 26 .................................................................. 131 62 HIGH DOUBLE GIRDER HOIST ND, REEVING: 28 .................................................................. 133 DOUBLE GIRDER TROLLEY, LOW .................................................................................................... 135 63 LOW DOUBLE GIRDER HOIST ND, REEVING: 02 ................................................................... 137 64 LOW DOUBLE GIRDER HOIST ND, REEVING: 04 ................................................................... 139 NORMAL HEADROOM TROLLEY ...................................................................................................... 141 65 NORMAL HEADROOM HOIST NB, REEVING: 02 .................................................................... 143 66 NORMAL HEADROOM HOIST NB, REEVING: 04 .................................................................... 145 67 NORMAL HEADROOM HOIST NC, REEVING: 02 .................................................................... 147 68 NORMAL HEADROOM HOIST NC, REEVING: 02, CURVED TRACK ...................................... 149 69 NORMAL HEADROOM HOIST NC, REEVING: 04 .................................................................... 151 70 NORMAL HEADROOM HOIST NC, REEVING: 04, CURVED TRACK ...................................... 153 71 NORMAL HEADROOM HOIST ND, REEVING: 02 .................................................................... 155 72 NORMAL HEADROOM HOIST ND, REEVING: 02, CURVED TRACK ...................................... 157 73 NORMAL HEADROOM HOIST ND, REEVING: 04 .................................................................... 159 74 NORMAL HEADROOM HOIST ND, REEVING: 04, CURVED TRACK ...................................... 161 75 NORMAL HEADROOM HOIST ND, REEVING: 06 .................................................................... 163 76 NORMAL HEADROOM HOIST ND, REEVING: 06, CURVED TRACK ..................................... 165 77 NORMAL HEADROOM HOIST ND, REEVING: 08 .................................................................... 167 78 NORMAL HEADROOM HOIST ND, REEVING: 08, CURVED TRACK ...................................... 169 79 NORMAL HEADROOM HOIST ND, REEVING: 22 .................................................................... 171 80 NORMAL HEADROOM HOIST ND, REEVING: 22, CURVED TRACK ...................................... 173 English 30/12/2011 3 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 81 NORMAL HEADROOM HOIST ND, REEVING: 24 ..................................................................... 175 82 NORMAL HEADROOM HOIST ND, REEVING: 24, CURVED TRACK ....................................... 177 83 NORMAL HEADROOM HOIST ND, REEVING: 26 ..................................................................... 179 84 NORMAL HEADROOM HOIST ND, REEVING: 26, CURVED TRACK ....................................... 181 85 NORMAL HEADROOM HOIST ND, REEVING: 28 ..................................................................... 183 86 NORMAL HEADROOM HOIST ND, REEVING: 28, CURVED TRACK ....................................... 185 87 NORMAL HEADROOM HOIST NE, REEVING: 02 ..................................................................... 187 88 NORMAL HEADROOM HOIST NE, REEVING: 04 ..................................................................... 189 89 NORMAL HEADROOM HOIST NE, REEVING: 06 ..................................................................... 191 90 NORMAL HEADROOM HOIST NE, REEVING: 22 ..................................................................... 193 91 NORMAL HEADROOM HOIST NE, REEVING: 24 ..................................................................... 195 92 NORMAL HEADROOM HOIST NE, REEVING: 26 ..................................................................... 197 93 NORMAL HEADROOM HOIST NE, REEVING: 28 ..................................................................... 199 FIXED HOIST ....................................................................................................................................... 201 94 FIXED HOIST NB, REEVING: 02................................................................................................ 203 95 FIXED HOIST NB, REEVING: 04................................................................................................ 205 96 FIXED HOIST NC, REEVING: 02 ............................................................................................... 207 97 FIXED HOIST NC, REEVING: 04 ............................................................................................... 209 98 FIXED HOIST ND, REEVING: 02 ............................................................................................... 211 99 FIXED HOIST ND, REEVING: 04 ............................................................................................... 213 100 FIXED HOIST ND, REEVING: 06 ............................................................................................... 215 101 FIXED HOIST ND, REEVING: 08 ............................................................................................... 217 102 FIXED HOIST ND, REEVING: 22 ............................................................................................... 219 103 FIXED HOIST ND, REEVING: 24 ............................................................................................... 221 104 FIXED HOIST ND, REEVING: 26 ............................................................................................... 223 105 FIXED HOIST ND, REEVING: 28 ............................................................................................... 225 106 FIXED HOIST NE, REEVING: 02................................................................................................ 227 107 FIXED HOIST NE, REEVING: 04................................................................................................ 229 108 FIXED HOIST NE, REEVING: 06................................................................................................ 231 109 FIXED HOIST NE, REEVING: 08................................................................................................ 233 110 FIXED HOIST NE, REEVING: 22................................................................................................ 235 111 FIXED HOIST NE, REEVING: 24................................................................................................ 237 112 FIXED HOIST NE, REEVING: 26................................................................................................ 239 113 FIXED HOIST NE, REEVING: 28................................................................................................ 241 114 FIXED HOIST NF, REEVING: 22................................................................................................ 243 115 FIXED HOIST NF, REEVING: 24................................................................................................ 245 116 FIXED HOIST NF, REEVING: 26................................................................................................ 247 117 FIXED HOIST NF, REEVING: 28................................................................................................ 249 SPECIAL LOW HEADROOM HOIST ................................................................................................... 251 118 SPECIAL LOW HEADROOM HOIST NB, REEVING: 04 ............................................................ 253 MACHINERY HOIST ............................................................................................................................ 255 119 MACHINERY HOIST NBM1V, REEVING: M1............................................................................. 257 120 MACHINERY HOIST NBM2V, REEVING: M2, ROPES TO SAME DIRECTION ......................... 259 121 MACHINERY HOIST NBM2V, REEVING: M2, ROPES TO OPPOSITE DIRECTIONS............... 261 122 MACHINERY HOIST NCM1V, REEVING: M1 ............................................................................ 263 English 30/12/2011 4 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 123 124 125 126 127 128 129 130 MACHINERY HOIST NCM2V, REEVING: M2, ROPES TO SAME DIRECTION ........................ 265 MACHINERY HOIST NCM2V, REEVING: M2, ROPES TO OPPOSITE DIRECTIONS .............. 267 MACHINERY HOIST NDM1V, REEVING: M1 ............................................................................ 269 MACHINERY HOIST NDM2V, REEVING: M2, ROPES TO SAME DIRECTION ........................ 271 MACHINERY HOIST NDM2V, REEVING: M2, ROPES TO OPPOSITE DIRECTIONS .............. 273 MACHINERY HOIST NEM1V, REEVING: M1 ............................................................................ 275 MACHINERY HOIST NEM2V, REEVING: M2 ............................................................................ 277 HOOK ........................................................................................................................................ 279 130.1 130.2 130.3 Hook block dimensions ..................................................................................................................... 279 New hook blocks to be released in 2012 ........................................................................................... 280 Hook forging dimensions ................................................................................................................... 281 131 DRUM AND ROPE SHEAVE DIAMETERS ................................................................................ 282 PRODUCTS TO BE PHASED OUT IN 2012........................................................................................ 283 132 DOUBLE GIRDER HOIST ND, REEVING: 06 ............................................................................ 285 133 DOUBLE GIRDER HOIST ND, REEVING: 08 ............................................................................ 287 134 DOUBLE GIRDER HOIST ND, REEVING: 22 ............................................................................ 289 135 DOUBLE GIRDER HOIST ND, REEVING: 24 ............................................................................ 291 136 DOUBLE GIRDER HOIST ND, REEVING: 26 ............................................................................ 293 137 DOUBLE GIRDER HOIST ND, REEVING: 28 ............................................................................ 295 138 HIGH DOUBLE GIRDER HOIST ND, REEVING: 06 .................................................................. 297 139 HIGH DOUBLE GIRDER HOIST ND, REEVING: 08 .................................................................. 299 140 HIGH DOUBLE GIRDER HOIST ND, REEVING: 22 .................................................................. 301 141 HIGH DOUBLE GIRDER HOIST ND, REEVING: 24 .................................................................. 303 142 HIGH DOUBLE GIRDER HOIST ND, REEVING: 26 .................................................................. 305 143 HIGH DOUBLE GIRDER HOIST ND, REEVING: 28 .................................................................. 307 144 NORMAL HEADROOM HOIST ND, REEVING: 06 .................................................................... 309 145 NORMAL HEADROOM HOIST ND, REEVING: 06, CURVED TRACK ..................................... 311 146 NORMAL HEADROOM HOIST ND, REEVING: 08 .................................................................... 313 147 NORMAL HEADROOM HOIST ND, REEVING: 08, CURVED TRACK ...................................... 315 148 NORMAL HEADROOM HOIST ND, REEVING: 22 .................................................................... 317 149 NORMAL HEADROOM HOIST ND, REEVING: 22, CURVED TRACK ...................................... 319 150 NORMAL HEADROOM HOIST ND, REEVING: 24 .................................................................... 321 151 NORMAL HEADROOM HOIST ND, REEVING: 24, CURVED TRACK ...................................... 323 152 NORMAL HEADROOM HOIST ND, REEVING: 26 .................................................................... 325 153 NORMAL HEADROOM HOIST ND, REEVING: 26, CURVED TRACK ...................................... 327 154 NORMAL HEADROOM HOIST ND, REEVING: 28 .................................................................... 329 155 NORMAL HEADROOM HOIST ND, REEVING: 28, CURVED TRACK ...................................... 331 156 FIXED HOIST ND, REEVING: 06............................................................................................... 333 157 FIXED HOIST ND, REEVING: 08............................................................................................... 335 158 FIXED HOIST ND, REEVING: 22............................................................................................... 337 159 FIXED HOIST ND, REEVING: 24............................................................................................... 339 160 FIXED HOIST ND, REEVING: 26............................................................................................... 341 161 FIXED HOIST ND, REEVING: 28............................................................................................... 343 English 30/12/2011 5 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 1 CHANGE HISTORY Change Table code Modified by Date MOT dimension corrected. MOT dimension corrected. 124132 124133 ETTPSU ETTPSU 22.12.2011 22.12.2011 MOT dimension corrected. 124134 ETTPSU 22.12.2011 MOT dimension corrected. 124135 ETTPSU 22.12.2011 MOT dimension corrected. Missing H1 dimension added. 124515 ETTPSU 22.12.2011 MOT dimension corrected. Missing H1 dimension added. 124516 ETTPSU 22.12.2011 MOT dimension corrected. Missing H1 dimension added. 124517 ETTPSU 22.12.2011 MOT dimension corrected. Missing H1 dimension added. 124518 ETTPSU 22.12.2011 MOT dimension corrected. 124426 ETTPSU 22.12.2011 MOT dimension corrected. 124427 ETTPSU 22.12.2011 MOT dimension corrected. 124428 ETTPSU 22.12.2011 MOT dimension corrected. 124429 ETTPSU 22.12.2011 MOT dimension corrected. 124578 ETTPSU 22.12.2011 MOT dimension corrected. 124579 ETTPSU 22.12.2011 MOT dimension corrected. 124580 ETTPSU 22.12.2011 MOT dimension corrected. 124581 ETTPSU 22.12.2011 MOT dimension corrected. 124936 ETTPSU 22.12.2011 MOT dimension corrected. 124937 ETTPSU 22.12.2011 MOT dimension corrected. 124938 ETTPSU 22.12.2011 MOT dimension corrected. 124939 ETTPSU 22.12.2011 MOT dimension corrected. 124940 ETTPSU 22.12.2011 MOT dimension corrected. 124941 ETTPSU 22.12.2011 MOT dimension corrected. 124942 ETTPSU 22.12.2011 MOT dimension corrected. 124943 ETTPSU 22.12.2011 MOT dimension corrected. 126313 ETTPSU 22.12.2011 MOT dimension corrected. 126314 ETTPSU 22.12.2011 MOT dimension corrected. 126316 ETTPSU 22.12.2011 MOT dimension corrected. 126317 ETTPSU 22.12.2011 MOT dimension corrected. 126318 ETTPSU 22.12.2011 MOT dimension corrected. 126319 ETTPSU 22.12.2011 English Drawing code 30/12/2011 6 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS English 30/12/2011 7 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS LOW HEADROOM TROLLEY English 30/12/2011 8 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 2 LOW HEADROOM HOIST NB, REEVING: 02 Hoisting speed (m/min) Load Class kg Fem/ISO 800 3m/M6 1000 2m/M5 1250 3m/M6 1600 2m/M5 F gear + P1/T1 motor High Low 10 1.7 10 1.7 - Hoist dimensions HOL Length m code 12 A 19 C M1 mm 431 561 Motor dimensions Motor P1 M2 (mm) 498 Weight ( kg) 21 P2 558 31 Trolley dimensions B min. B max. 80 E1 303 L6 68 410 E2 305 L7 203 D1 (∅ ∅) 80 E4 380 L9 33 D3 (∅ ∅) 40 E5 236 L10 29 F gear + P2/T2 motor High Low 10 1.7 10 1.7 10 1.7 10 1.7 H2 mm 90 144 P3 588 35 E7 192 L12 148 H5 mm 501 501 T1 498 22 H5* mm 516 516 T2 498 22 E9 75 L16 22 E11 387 L17 29 G gear + P2/T2 motor High Low 12.5 2.1 12.5 2.1 12.5 2.1 12.5 2.1 L11 mm 203 333 L15 mm 225 292 H gear + P3/T3 motor High Low 16 2.7 16 2.7 16 2.7 16 2.7 W2 mm 166 231 Weight kg 175 195 T3 498 22 H1 71 M3 158 H6 523 M6 115 L2 25 W1 64.4 L4 376 L5 248 D002075_A 061739 C-dimensions B 80 271 321 371 - 270 320 370 410 C 400 430 460 485 Note: All dimensions in mm. Note: Weight calculated with P1 motor. * Please, disregard the dimension H5*. English 30/12/2011 9 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Low Headroom Hoist NB, REEVING: 02 English 30/12/2011 10 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 3 LOW HEADROOM HOIST NB, REEVING: 04 Load kg 1600 2000 2500 3200 Class Fem/ISO 3m/M6 2m/M5 3m/M6 2m/M5 F gear + P1/T1 motor High Low 5 0.8 5 0.8 - Hoist dimensions HOL Length m code 6 A 9.5 C Motor dimensions Motor P1 M2 (mm) 498 Weight ( kg) 21 Trolley dimensions B min. B max. 80 E1 303 L6 68 410 E2 305 L7 203 M1 mm 431 561 P2 558 31 D1 (∅ ∅) 80 E4 380 L9 33 D3 (∅ ∅) 40 E5 236 L10 29 H2 mm 45 72 P3 588 35 E7 192 L12 148 G gear + P2/T2 motor High Low 6.3 1.1 6.3 1.1 6.3 1.1 6.3 1.1 H5 mm 501 501 T1 498 22 H5* mm 516 516 T2 498 22 E9 75 L16 22 H gear + P3/T2 motor High Low 8 1.3 8 1.3 8 1.3 8 1.3 E11 387 L17 29 L11 mm 203 333 L15 mm 225 292 W2 mm 166 231 Weight kg 180 200 T3 498 22 H1 15 M3 158 H6 523 M6 115 L2 25 W1 64.4 L4 376 L5 248 D002080_A 062124 C-dimensions B 80 271 321 371 - 270 320 370 410 C 350 380 410 435 Note: All dimensions in mm. Note: Weight calculated with P1 motor. * Please, disregard the dimension H5*. English 30/12/2011 11 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Low Headroom Hoist NB, REEVING: 04 English 30/12/2011 12 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 4 LOW HEADROOM HOIST NC, REEVING: 02 Hoisting speed (m/min) Load Class kg Fem/ISO 2000 3m/M6 2500 2m/M5 3200 1Am/M4 E gear + P3/T3 motor High Low 8 1.3 8 1.3 8 1.3 Hoist dimensions HOL Length m code 12 B 18 C 24 D M1 mm 467 567 667 Motor dimensions Motor P3 M2 (mm) 597 Weight ( kg) 35 Trolley dimensions B min. B max. 100 E1 338 L6 5.8 490 E2 305 L7 346 P4 690 53 D1 (∅ ∅) 100 E4 380 L9 45 D3 (∅ ∅) 63 E5 236 L10 42 F gear + P3/T3 motor High Low 10 1.7 10 1.7 - H2 mm 95 144 193 H5 mm 574 574 574 T3 507 22 T4 610 45 E7 256 L12 198 E9 125 L16 53 H5* mm 590 590 590 E11 415 M3 173 H gear + P4/T4 motor High Low 16 2.7 16 2.7 - L11 mm 346 446 546 H1 88 M6 121 W3 mm 202.5 302.5 402.5 H6 538 W1 80.6 Weight kg 325 345 365 L2 37.5 W2 202.5 L4 427 L5 241 D002087_A 001576 C-dimensions B 100 251 301 351 401 451 - 250 300 350 400 450 490 C 440 470 505 535 570 595 Note: All dimensions in mm. Note: Weight calculated with P3 motor. * Please, disregard the dimension H5*. English 30/12/2011 13 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Low Headroom Hoist NC, REEVING: 02 English 30/12/2011 14 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 5 LOW HEADROOM HOIST NC, REEVING: 04 Hoisting speed (m/min) Load Class kg Fem/ISO 4000 3m/M6 5000 2m/M5 F gear + P3/T3 motor High Low 5 0.8 5 0.8 H gear + P4/T4 motor High Low 8 1.3 8 1.3 Hoist dimensions HOL Length m code 6 B 9 C 12 D M1 mm 467 567 667 H2 mm 49 74 99 H5 mm 574 574 574 Motor dimensions Motor P3 M2 (mm) 597 Weight ( kg) 35 P4 690 53 T3 507 22 T4 610 45 Trolley dimensions B min. B max. 100 E1 338 L6 5.8 490 E2 305 L7 346 D1 (∅ ∅) 100 E4 380 L9 45 D3 (∅ ∅) 63 E5 236 L10 42 E7 256 L12 198 E9 125 L16 53 H5* mm 590 590 590 E11 415 M3 173 L11 mm 346 446 546 H1 8 M6 121 W3 mm 202.5 302.5 402.5 H6 538 W1 80.6 Weight kg 330 350 370 L2 37.5 W2 202.5 L4 427 L5 241 D002092_A 062166 C-dimensions B 100 200 250 301 351 401 451 - 199 249 300 350 400 450 490 C 490 460 425 455 490 520 550 Note: All dimensions in mm. Note: Weight calculated with P3 motor. * Please, disregard the dimension H5*. English 30/12/2011 15 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Low Headroom Hoist NC, REEVING: 04 English 30/12/2011 16 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 6 LOW HEADROOM HOIST NC, REEVING: 04, EXTENDED LOAD Hoisting speed (m/min) Load Class kg Fem/ISO 6300 1Am/M4 E gear + P3/T3 motor High Low 4 0.7 Hoist dimensions HOL Length m code 6 B 9 C 12 D M1 mm 467 567 667 Motor dimensions Motor M2 (mm) Weight ( kg) T3 507 22 Trolley dimensions B min. B max. 100 E1 332 L6 1.5 490 E2 305 L7 388 P3 597 35 D1 (∅ ∅) 125 E4 380 L9 42 D3 (∅ ∅) 63 E5 236 L10 40 H2 mm 49 74 99 E7 256 L12 185 H5 mm 578 578 578 E9 125 L16 80 H5* mm 594 594 594 E11 421 M3 188 H1 22 M6 121 L11 mm 358 458 558 H6 538 W1 97.5 W3 mm 195 295 395 L2 41.5 W2 225 Weight kg 330 350 370 L4 427 L5 253 D002093_A 062511 C-dimensions B 100 200 250 301 351 401 451 - 199 249 300 350 400 450 490 C 505 470 440 475 505 540 570 Note: All dimensions in mm. Note: Weight calculated with P3 motor. * Please, disregard the dimension H5*. English 30/12/2011 17 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Low Headroom Hoist NC, REEVING: 04, Extended Load English 30/12/2011 18 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 7 LOW HEADROOM HOIST NC, REEVING: A2 Hoisting speed (m/min) Load Class kg Fem/ISO 1250 3m/M6 1600 2m/M5 Hoist dimensions HOL Length m code 22.5 C 30 D Motor dimensions Motor M2 (mm) Weight ( kg) Trolley dimensions B min. B max 100 E1 338 L6 5.8 490 E2 305 L7 346 E gear + P2/T2 motor High Low 8 1.3 8 1.3 M1 mm 567 667 P2 567 35 D1 (∅ ∅) 63 E4 380 L9 45 H2 mm 144 193 P4 690 53 D2 (∅ ∅) 100 E5 236 L10 42 H5 mm 574 574 T2 507 22 E7 256 L12 198 F gear + P2/T2 motor High Low 10 1.7 10 1.7 H5* mm 590 590 L11 mm 446 546 W3 mm 302.5 402.5 H1 88 M6 121 H6 536 W1 80.6 H gear + P4/T4 motor High Low 16 2.7 16 2.7 Weight kg 320 340 T4 610 45 E9 125 L16 53 E11 415 M3 173 L2 37.5 W2 202.5 L4 427 L5 241 D002106_A 062531 C-dimensions B 100 251 301 351 401 451 - 250 300 350 400 450 490 C 410 440 475 505 540 570 Note: All dimensions in mm. Note: Weight calculated with P2 motor. * Please, disregard the dimension H5*. English 30/12/2011 19 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Low Headroom Hoist NC, REEVING: A2 English 30/12/2011 20 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 8 LOW HEADROOM HOIST NC, REEVING: A4 Hoisting speed (m/min) Load Class kg Fem/ISO 2500 3m/M6 3200 2m/M5 Hoist dimensions HOL Length m code 11 C 15 D M1 mm 567 667 Motor dimensions Motor P2 M2 (mm) 567 Weight ( kg) 35 Trolley dimensions B min. B max. 100 E1 338 L6 5.8 490 E2 305 L7 346 E gear + P2/T2 motor High Low 4 0.7 4 0.7 P4 690 53 D1 (∅ ∅) 100 E4 380 L9 45 D3 (∅ ∅) 63 E5 236 L10 42 H2 mm 73 99 T2 507 22 E7 256 L12 198 F gear + P2/T2 motor High Low 5 0.8 5 0.8 H5 mm 574 574 H5* mm 590 590 L11 mm 446 546 H gear + P4/T4 motor High Low 8 1.3 8 1.3 W3 mm 302.5 402.5 Weight kg 335 355 T4 610 45 E9 125 L16 53 E11 415 M3 173 H1 28 M6 121 H6 536 W1 80.6 L2 37.5 W2 202.5 L4 427 L5 241 D002107_A 062529 C-dimensions B 100 241 301 351 401 451 - 240 300 350 400 450 490 C 340 380 415 445 480 510 Note: All dimensions in mm. Note: Weight calculated with P2 motor. * Please, disregard the dimension H5*. English 30/12/2011 21 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Low Headroom Hoist NC, REEVING: A4 English 30/12/2011 22 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 9 LOW HEADROOM HOIST ND, REEVING: 02 Hoisting speed (m/min) Load Class kg Fem/ISO 4000 3m/M6 5000 2m/M5 6300 1Am/M4 Hoist dimensions HOL Length m code 18 D 24 E 32 F E gear + P5/T5 motor High Low 8 1.3 8 1.3 8 1.3 M1 mm 697 817 967 Motor dimensions Motor P5 M2 (mm) 722 Weight ( kg) 58 Trolley dimensions B min. B max. 100 L1 175 610 L2 411 H2 mm 176 235 309 P6 722 85 D1 (∅ ∅) 125 L3 620 F gear + P5/T5 motor High Low 10 1.7 10 1.7 - D2 (∅ ∅) 63 L5 3 H3 mm 647 767 917 P7 762 105 T5 642 45 H gear + P6/T6 motor High Low 16 2.7 16 2.7 - L12 mm 1058 1178 1328 T6 722 65 W mm 708 828 978 J gear + P7/T7 motor High Low 20 3.3 20 3.3 - L4 mm 672 672 672 L4* mm 692 692 692 Weight kg 595 640 690 T7 722 71 H1 236 L6 41 L7 35 L8 262 L9 60 L10 513 L11 106 D002112_A 059568 C-dimensions B 100 200 260 441 541 - 199 259 440 540 610 C 630 600 580 640 680 Note: Weight calculated with P5 motor. Note: All dimensions in mm. * Please, disregard the dimension L4*. English 30/12/2011 23 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Low Headroom Hoist ND, REEVING: 02 English 30/12/2011 24 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 10 LOW HEADROOM HOIST ND, REEVING: 04 Hoisting speed (m/min) Load Class kg Fem/ISO 5000 3m/M6 6300 3m/M6 8000 3m/M6 10000 2m/M5 E gear + P5/T5 motor High Low 4 0.7 4 0.7 4 0.7 4 0.7 Hoist dimensions HOL Length m code 9 D 12 E 16 F M1 mm 697 817 967 Motor dimensions Motor P5 M2 (mm) 722 Weight ( kg) 58 Trolley dimensions B min. B max. 100 L1 175 610 L2 489 P6 722 85 D1 (∅ ∅) 125 L3 620 D2 (∅ ∅) 63 L5 3 F gear + P5/T5 motor High Low 5 0.8 5 0.8 5 0.8 5 0.8 H2 mm 88 118 156 P7 762 105 H3 mm 569 689 839 H gear + P6/T6 motor High Low 8 1.3 8 1.3 8 1.3 8 1.3 L12 mm 1058 1178 1328 T5 642 45 T6 722 65 L7 35 L8 262 W mm 708 828 978 J gear + P7/T7 motor High Low 10 1.7 10 1.7 10 1.7 10 1.7 L4 mm 674 674 674 L4* mm 694 694 694 Weight kg 610 660 710 T7 722 71 H1 314 L6 40 L9 60 L10 513 L11 106 D002117_A 004991 C-dimensions B 100 200 290 431 531 - 199 289 430 530 610 C 610 575 530 595 650 Note: Weight calculated with P5 motor. Note: All dimensions in mm. * Please, disregard the dimension L4*. English 30/12/2011 25 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Low Headroom Hoist ND, REEVING: 04 English 30/12/2011 26 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 11 LOW HEADROOM HOIST ND, REEVING: 04, EXTENDED LOAD Hoisting speed (m/min) Load Class kg Fem/ISO 12500 1Am/M4 E gear + P5/T5 motor High Low 4 0.7 Hoist dimensions HOL Length m code 9 D 12 E 16 F M1 mm 697 817 967 Motor dimensions Motor P5 M2 (mm) 722 Weight ( kg) 58 Trolley dimensions B min. B max. 100 L1 175 610 L2 488 P6 722 85 D1 (∅ ∅) 150 L3 619 D2 (∅ ∅) 63 L5 4 F gear + P5/T5 motor High Low - H2 mm 88 118 156 H3 mm 569 689 839 P7 762 105 T5 642 45 L12 mm 1058 1178 1328 T6 722 65 H gear + P6/T5 motor High Low - W mm 708 828 978 J gear + P7/T7 motor High Low - L4 mm 670 670 670 L4* mm 690 690 690 Weight kg 610 660 710 T7 722 71 H1 313 L6 44 L7 48 L8 272 L9 47 L10 510 L11 107 D002118_A 005000 C-dimensions B 100 200 290 431 531 - 199 289 430 530 610 C 655 620 585 650 695 Note: Weight calculated with P5 motor. Note: All dimensions in mm. * Please, disregard the dimension L4*. English 30/12/2011 27 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Low Headroom Hoist ND, REEVING: 04, Extended Load English 30/12/2011 28 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS DOUBLE GIRDER TROLLEY, MEDIUM English 30/12/2011 29 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS English 30/12/2011 30 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 12 DOUBLE GIRDER HOIST NB, REEVING: 02 Hoisting speed (m/min) Load Class kg Fem/ISO 800 3m/M6 1000 2m/M5 1250 3m/M6 1600 2m/M5 F gear + P1/T1 motor High Low 10 1.7 10 1.7 - Hoist dimensions HOL Length m code 12 A 19 C Motor dimensions Motor P1 M2 (mm) 498 Weight (kg) 21 Trolley dimensions C D1(∅ ∅) 320 90 L1 L2 83 324 L14 L15 319 138 M1 mm 431 561 P2 558 31 D2(∅ ∅) 120 L3 250 L16 104 H2 mm 90 144 P3 588 35 D3(∅ ∅) 63 L4 15 L17 600 F gear + P2/T2 motor High Low 10 1.7 10 1.7 10 1.7 10 1.7 Min R mm 1200 1200 T1 498 22 G gear + P2/T2 motor High Low 12.5 2.1 12.5 2.1 12.5 2.1 12.5 2.1 L6 mm 87 87 T2 498 22 L6* mm 72 72 H gear + P3/T3 motor High Low 16 2.7 16 2.7 16 2.7 16 2.7 Weight kg 220 230 T3 498 22 H1 WB W min W max 519 L5 1096 L18 212 820 L7 376 L19 138 50 L8 265 70 L9 90 L10 397 L11 423 L12 535 L13 561 D002076_A 062126 Note: All dimensions in mm. Note: Weight calculated with P1 motor. Note: Min R with second brake. Note: Standard rail gauges: 1200, 1400, 1700 and 2000. * Please, disregard the dimension L6*. English 30/12/2011 31 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist NB, REEVING: 02 English 30/12/2011 32 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 13 DOUBLE GIRDER HOIST NB, REEVING: 04 Hoisting speed (m/min) Load Class kg Fem/ISO 1600 3m/M6 2000 2m/M5 2500 3m/M6 3200 2m/M5 F gear + P1/T1 motor High Low 5 0.8 5 0.8 - Hoist dimensions HOL Length m code 6 A 9.5 C Motor dimensions Motor P1 M2 (mm) 498 Weight (kg) 21 Trolley dimensions C D1(∅ ∅) 270 90 L1 L2 83 324 L14 L15 319 138 M1 mm 431 561 P2 558 31 D2(∅ ∅) 120 L3 250 L16 104 H2 mm 45 72 P3 588 35 D3(∅ ∅) 63 L4 15 L17 600 F gear + P2/T2 motor High Low 5 0.8 5 0.8 5 0.8 5 0.8 L6 mm 87 87 T1 498 22 G gear + P2/T2 motor High Low 6.3 1.1 6.3 1.1 6.3 1.1 6.3 1.1 L6* mm 72 72 T2 498 22 Min R mm 1200 1200 H gear + P3/T3 motor High Low 8 1.3 8 1.3 8 1.3 8 1.3 Weight kg 225 235 T3 498 22 H1 WB W min W max 574 L5 1096 L18 212 820 L7 376 L19 138 50 L8 265 70 L9 90 L10 411 L11 410 L12 549 L13 548 D002081_A 062127 Note: All dimensions in mm. Note: Weight calculated with P1 motor. Note: Min R with second brake Note: Standard rail gauges: 1200, 1400, 1700 and 2000. * Please, disregard the dimension L6*. English 30/12/2011 33 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist NB, REEVING: 04 English 30/12/2011 34 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 14 DOUBLE GIRDER HOIST NC, REEVING: 02 Hoisting speed (m/min) Load Class kg Fem/ISO 2000 3m/M6 2500 2m/M5 3200 1Am/M4 E gear + P3/T3 motor High Low 8 1.3 8 1.3 8 1.3 Hoist dimensions HOL Length m code 12 B 18 C 24 D 30 E M1 mm 467 567 667 787 M2 mm 252 252 352 352 Motor dimensions Motor P3 M3 (mm) 597 Weight (kg) 35 P4 690 53 T3 507 22 Trolley dimensions C D1 (∅ ∅) 360 L1 83 L13 138 90 L2 324 L14 158 D2 (∅ ∅) 120 L3 250 L15 600 D3 (∅ ∅) 63 L4 12 L16 138 F gear + P3/T3 motor High Low 10 1.7 10 1.7 - H1 mm 459 459 559 559 H2 mm 95 144 193 252 Min R mm 1200 1200 1400 1400 H gear + P4/T4 motor High Low 16 2.7 16 2.7 - L18 mm 119 119 119 119 L18* mm 103 103 103 103 Weight kg 310 320 335 350 T4 610 45 WB W min W max 1010 L5 1286 L17 212 50 L6 427 70 L7 301 L8 90 L9 482 L10 528 L11 620 L12 666 D002088_A 062138 Note: Weight calculated with P3 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1200, 1400, 1700 and 2000. * Please, disregard the dimension L18*. English 30/12/2011 35 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist NC, REEVING: 02 English 30/12/2011 36 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 15 DOUBLE GIRDER HOIST NC, REEVING: 04 Hoisting speed (m/min) Load Class kg Fem/ISO 4000 3m/M6 5000 2m/M5 6300 1Am/M4 High 4 4 4 E gear + P3/T3 motor Low 0.7 0.7 0.7 Hoist dimensions HOL Length m code 6 B 9 C 12 D 15 E M1 mm 467 567 667 787 M2 mm 252 252 352 352 Motor dimensions Motor P3 M3 (mm) 597 Weight (kg) 35 P4 690 53 T3 507 22 Trolley dimensions C1 C2 350 L1 83 L13 138 447 L2 324 L14 158 D1 (∅ ∅) 90 L3 250 L15 600 D2 (∅ ∅) 120 L4 12 L16 212 D3 (∅ ∅) 63 L5 1286 L17 138 High 5 5 - H1 mm 537 537 637 637 F gear + P3/T3 motor Low 0.8 0.8 - H2 mm 49 74 99 129 Min R mm 1200 1200 1400 1400 H gear + P4/T4 motor High Low 8 1.3 8 1.3 - L18 mm 119 119 119 119 L18* mm 103 103 103 103 Weight kg 315 325 340 360 T4 610 45 WB W min W max 1010 L6 427 50 L7 301 70 L8 90 L9 505 L10 505 L11 643 L12 643 D002095_A 062139 Note: Weight calculated with P3 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1200, 1400, 1700 and 2000. * Please, disregard the dimension L18*. English 30/12/2011 37 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist NC, REEVING: 04 English 30/12/2011 38 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 16 DOUBLE GIRDER HOIST ND, REEVING: 02 Hoisting speed (m/min) Load Class kg Fem/ISO 4000 3m/M6 5000 2m/M5 6300 1Am/M4 E gear + P5/T5 motor High Low 8 1.3 8 1.3 8 1.3 Hoist dimensions HOL Length m code 18 D 24 E 32 F 40 G M1 mm 697 817 967 1157 Motor dimensions Motor P5 M3 (mm) 722 Weight (kg) 58 P6 722 85 F gear + P5/T5 motor High Low 10 1.7 10 1.7 - M2 mm 259 259 372 522 P7 762 105 H1 mm 558 558 671 821 T5 642 45 H gear + P6/T6 motor High Low 16 2.7 16 2.7 - H2 mm 176 235 309 403 T6 722 65 L18 mm 30 30 30 30 J gear + P7/T7 motor High Low 20 3.3 20 3.3 - L18* mm 10 10 10 10 Min R mm 1400 1400 1700 2000 Weight kg 650 675 720 760 T7 722 71 Trolley dimensions C 476 L1 430 L13 148 D1 (∅ ∅) 110 L2 382 L14 128 D2 (∅ ∅) 140 L3 400 L15 900 D3 (∅ ∅) 63 L4 15 L16 148 WB 1080 L5 98 L17 255 W min 52 L6 1376 W max 87 L7 420 L8 100 L9 507 L10 573 L11 655 L12 721 D002113_A 005020 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1400, 1700 and 2000. * Please, disregard the dimension L18*. English 30/12/2011 39 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist ND, REEVING: 02 English 30/12/2011 40 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 17 DOUBLE GIRDER HOIST ND, REEVING: 04 Hoisting speed (m/min) Load Class kg Fem/ISO 5000 3m/M6 6300 3m/M6 8000 3m/M6 10000 2m/M5 12500 1Am/M4 E gear + P5/T5 motor High Low 4 0.7 4 0.7 4 0.7 4 0.7 4 0.7 Hoist dimensions HOL Length m code 9 D 12 E 16 F 20 G M1 mm 697 817 967 1157 Motor dimensions Motor P5 M3 (mm) 722 Weight (kg) 58 P6 722 85 M2 mm 259 259 372 522 P7 762 105 F gear + P5/T5 motor High Low 5 0.8 5 0.8 5 0.8 5 0.8 - H1 mm 640 640 753 903 T5 642 45 H gear + P6/T6 motor High Low 8 1.3 8 1.3 8 1.3 8 1.3 - H2 mm 88 118 156 201 T6 722 65 L18 mm 30 30 30 30 J gear + P7/T7 motor High Low 10 1.7 10 1.7 10 1.7 10 1.7 - L18* mm 10 10 10 10 Min R mm 1400 1400 1700 2000 Weight kg 670 700 745 785 T7 722 71 Trolley dimensions C1 421 L1 470 L13 148 C2 477 L2 382 L14 128 D1 (∅ ∅) 110 L3 400 L15 900 D2 (∅ ∅) 140 L4 15 L16 148 D3 (∅ ∅) 63 L5 98 L17 255 WB 1080 L6 1376 W min 52 L7 420 W max 87 L8 100 L9 540 L10 540 L11 688 L12 688 D002119_A 005021 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1400, 1700 and 2000. * Please, disregard the dimension L18*. English 30/12/2011 41 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist ND, REEVING: 04 English 30/12/2011 42 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 18 DOUBLE GIRDER HOIST ND, REEVING: 06 Hoisting speed (m/min) Load Class kg Fem/ISO 12000 3m/M6 15000 2m/M5 F gear + P5/T5 motor High Low 3.2 0.5 3.2 0.5 Hoist dimensions HOL Length m code 6 D 8 E 10 F 13 G M1 mm 558 678 828 1018 Motor dimensions Motor P5 MOT (mm) 578 Weight ( kg) 58 P6 578 85 M2 mm 678 828 1003 1183 P7 618 105 H gear + P6/T6 motor High Low 5 0.8 5 0.8 H1 mm 645 795 970 1150 T5 498 45 H2 mm 53 78 98 132 T6 578 65 J gear + P7/T7 motor High Low 6.3 1.1 6.3 1.1 Min R mm 1400 1700 2000 2400 Weight kg 760 805 850 915 T7 578 71 Trolley dimensions C 790 RO 98 ∅ BU 63 TD 94 BU 163 TH 430 BUH 100 E1 382 E2 1343 E3 18 GEA 143 WB 1080 ∅ WD 140 W min 54 W max 84 D007194_A 124515 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1400, 1700, 2000 and 2400. Note: M2 and weight calculated with Min R. English 30/12/2011 43 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist ND, REEVING: 06 English 30/12/2011 44 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 19 DOUBLE GIRDER HOIST ND, REEVING: 08 Hoisting speed (m/min) Load Class kg Fem/ISO 16000 2m/M5 20000 1Am/M4 F gear + P5/T5 motor High Low 2.5 0.4 2.5 0.4 Hoist dimensions HOL Length m code 4.5 D 6 E 8 F 10 G M1 mm 558 678 828 1018 Motor dimensions Motor P5 MOT (mm) 578 Weight ( kg) 58 P6 578 85 M2 mm 678 828 1003 1183 P7 618 105 H gear + P6/T6 motor High Low 4 0.7 4 0.7 H1 mm 645 795 970 1150 T5 498 45 H2 mm 44 53 76 98 T6 578 65 J gear + P7/T7 motor High Low 5 0.8 5 0.8 Min R mm 1400 1700 2000 2400 Weight kg 770 815 865 925 T7 578 71 Trolley dimensions C 520 RO 98 ∅ BU 63 TD 20 BU 148 TH 692 BUH 100 E1 382 E2 1328 E3 15 GEA 143 WB 1080 ∅ WD 110 W min 54 W max 84 D007195_A 124516 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1400, 1700, 2000 and 2400.. Note: M2 and weight calculated with Min R. English 30/12/2011 45 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist ND, REEVING: 08 English 30/12/2011 46 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 20 DOUBLE GIRDER HOIST ND, REEVING: 22 Hoisting speed (m/min) Load Class kg Fem/ISO 4000 3m/M6 5000 2m/M5 F gear + P5/T5 motor High Low 10 1.7 10 1.7 Hoist dimensions HOL Length m code 8.5 D 13 E 18 F 25 G 33.5 H 46 J Motor dimensions Motor P5 MOT (mm) 578 Weight ( kg) 58 M1 mm 558 678 828 1018 1268 1618 P6 578 85 H gear + P6/T6 motor High Low 16 2.7 16 2.7 M2 mm 421 361 436 341 399 424 P7 618 105 BRA mm 128 128 Min R mm 1400 1400 1700 1700 2000 2400 T5 498 45 T6 578 65 J gear + P7/T7 motor High Low 20 3.3 20 3.3 Weight kg 660 680 730 760 840 925 T7 578 71 Trolley dimensions C 620 RO 98 ∅ BU 63 TD 97 BU 148 TH 427 BUH 100 E1 382 E2 1328 E3 15 GEA 143 WB 1080 ∅ WD 110 W min 52 W max 87 D007171_A 124132 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1400, 1700, 2000 and 2400. Note: Gear brake as standard brake for drum lengths H and J. Note: M2 and weight calculated with Min R. English 30/12/2011 47 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist ND, REEVING: 22 English 30/12/2011 48 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 21 DOUBLE GIRDER HOIST ND, REEVING: 24 Hoisting speed (m/min) Load Class kg Fem/ISO 8000 3m/M6 10000 2m/M5 Hoist dimensions HOL Length m code 4 D 6.5 E 9 F 12.5 G 16.5 H 23 J Motor dimensions Motor MOT (mm) Weight ( kg) P5 578 58 F gear + P5/T5 motor High Low 5 0.8 5 0.8 M1 mm 558 678 828 1018 1268 1618 P6 578 85 H gear + P6/T6 motor High Low 8 1.3 8 1.3 M2 mm 421 361 436 341 399 424 BRA mm 128 128 P7 618 105 J gear + P7/T7 motor High Low 10 1.7 10 1.7 Min R mm 1400 1400 1700 1700 2000 2400 T5 498 45 T6 578 65 Weight kg 725 745 795 825 900 990 T7 578 71 Trolley dimensions C 785 RO 98 ∅ BU 63 TD 97 BU 148 TH 427 BUH 100 E1 382 E2 1328 E3 15 GEA 143 WB 1080 ∅ WD 110 W min 52 W max 87 D007172_A 124133 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1400, 1700, 2000 and 2400. Note: Gear brake as standard brake for drum lengths H and J. Note: M2 and weight calculated with Min R. English 30/12/2011 49 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist ND, REEVING: 24 English 30/12/2011 50 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 22 DOUBLE GIRDER HOIST ND, REEVING: 26 Hoisting speed (m/min) Load Class kg Fem/ISO 12000 3m/M6 15000 2m/M5 Hoist dimensions HOL Length m code 4 E 6 F 8 G 11 H 15 J Motor dimensions Motor P5 MOT (mm) 578 Weight ( kg) 58 F gear + P5/T5 motor High Low 3.2 0.5 3.2 0.5 M1 mm 678 828 1018 1268 1618 P6 578 85 H gear + P6/T6 motor High Low 5 0.8 5 0.8 M2 mm 361 436 341 399 424 BRA mm 128 128 P7 618 105 T5 498 45 Min R mm 1400 1700 1700 2000 2400 T6 578 65 J gear + P7/T7 motor High Low 6.3 1.1 6.3 1.1 Weight kg 780 825 855 935 1020 T7 578 71 Trolley dimensions C 785 RO 98 ∅ BU 63 TD 94 BU 163 TH 430 BUH 100 E1 382 E2 1343 E3 18 GEA 143 WB 1080 ∅ WD 140 W min 54 W max 84 D007173_A 124134 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1400, 1700, 2000 and 2400. Note: Gear brake as standard brake for drum lengths H and J. Note: M2 and weight calculated with Min R. English 30/12/2011 51 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist ND, REEVING: 26 English 30/12/2011 52 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 23 DOUBLE GIRDER HOIST ND, REEVING: 28 Hoisting speed (m/min) Load Class kg Fem/ISO 16000 2m/M5 20000 1Am/M4 F gear + P5/T5 motor High Low 2.5 0.4 2.5 0.4 Hoist dimensions HOL Length m code 4.5 F 6 G 8 H 11.5 J Motor dimensions Motor P5 MOT (mm) 578 Weight ( kg) 58 M1 mm 828 1018 1268 1618 P6 578 85 H gear + P6/T6 motor High Low 4 0.7 4 0.7 M2 mm 436 341 399 424 P7 618 105 BRA mm 128 128 T5 498 45 Min R mm 1700 1700 2000 2400 T6 578 65 J gear + P7/T7 motor High Low 5 0.8 5 0.8 Weight kg 840 870 945 1030 T7 578 71 Trolley dimensions C 785 RO 98 ∅ BU 63 TD 94 BU 163 TH 430 BUH 100 E1 382 E2 1343 E3 18 GEA 143 WB 1080 ∅ WD 140 W min 54 W max 84 D007174_A 124135 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1400, 1700, 2000 and 2400. Note: Gear brake as standard brake for drum lengths H and J. Note: M2 and weight calculated with Min R. English 30/12/2011 53 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist ND, REEVING: 28 English 30/12/2011 54 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 24 DOUBLE GIRDER HOIST NE, REEVING: 02 Hoisting Speed (m/min) Load kg 6300 8000 10000 E gear High Low 8 1.3 P6/T6 motor P6/T6 motor P6/T6 motor Class Fem/ISO 3m/M6 2m/M5 1Am/M4 Hoist Dimensions HOL HOL* m m 15.5 10 21 15.5 28 22.5 36 30.5 47 41.5 61 55.5 80.5 75 97 91.5 *HOL with drum brake Motor Dimensions Motor M2 (mm) Weight (kg) Length code C D E F G H J K P6 536 85 F gear High Low 10 1.7 P6/T6 motor P6/T6 motor P7/T7 motor M1 mm 462 562 682 832 1022 1272 1622 1922 P7 576 105 M3 mm 714 799 799 949 1149 1469 1559 1944 G gear High Low 12.5 2.1 P7/T7 motor P7/T7 motor P8/T8 motor H1 mm 654 739 739 889 1089 1409 1499 1884 P8 711 106 H gear High Low 16 T8 motor T8 motor T9 motor H2 mm 139 188 251 322 421 546 721 868 T6 536 65 T7 536 71 J gear High Low 20 T9 motor T9 motor TA motor Min R mm 1400 1700 1700 2000 2400 3100 3400 4200 Max R mm 1400 2700 3100 3100 3100 3800 4200 4200 Weight kg 1250 1320 1370 1460 1570 1750 1950 2200 T8 536 81 T9 536 92 TA 576 106 L1 1842 L2 100.5 Trolley Dimensions C 892 E1 488 L3 87 D1 (∅ ∅) 140 E2 600 L4 707 D2 (∅ ∅) 170 E3 18 L5 628 D3 (∅ ∅) 63 E4 1000 L6 100 WB 1500 E5 253 L7 163 W min 54 E6 173 M4 472 W max 84 H3 757 M5 44 H4 743 M6 218 H5 920 H6 906 D006647_A 090649 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: Standard rail gauges: 1400, 1700, 2000, 2400, 2700, 3100, 3400, 3800 and 4200. Note: H1, M3 and weight calculated with min R. English 30/12/2011 55 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist NE, REEVING: 02 English 30/12/2011 56 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 25 DOUBLE GIRDER HOIST NE, REEVING: 04 Hoisting Speed (m/min) Load kg 12500 16000 20000 E gear High Low 4 0.7 P6/T6 motor P6/T6 motor P6/T6 motor Class Fem/ISO 3m/M6 2m/M5 1Am/M4 Hoist Dimensions HOL HOL* m m 7.5 4.5 10.5 7.5 14 11 18 15 23.5 20.5 30.5 27.5 40 37 48.5 45.5 *HOL with drum brake Motor Dimensions Motor M2 (mm) Weight (kg) Length code C D E F G H J K P6 536 85 F gear High Low 5 0.8 P6/T6 motor P6/T6 motor P7/T7 motor M1 mm 462 562 682 832 1022 1272 1622 1922 P7 576 105 M3 mm 714 799 799 949 1149 1469 1559 1944 G gear High Low 6.3 1.1 P7/T7 motor P7/T7 motor P8/T8 motor H1 mm 654 739 739 889 1089 1409 1499 1884 P8 711 106 T6 536 65 H gear High Low 8 T8 motor T8 motor T9 motor J gear High Low 10 T9 motor T9 motor TA motor H2 mm 69 94 125 161 210 273 360 434 Min R mm 1400 1700 1700 2000 2400 3100 3400 4200 Max R mm 1400 2700 3100 3100 3100 3800 4200 4200 T7 536 71 T8 536 81 T9 536 92 Weight kg 1290 1360 1410 1500 1620 1790 2000 2240 TA 576 106 Trolley Dimensions C 892 E1 488 L3 87 D1 (∅ ∅) 140 E2 600 L4 707 D2 (∅ ∅) 170 E3 18 L5 628 D3 (∅ ∅) 63 E4 1000 L6 100 WB 1500 E5 253 L7 163 W min 54 E6 173 M4 472 W max 84 H3 757 M5 44 H4 743 M6 218 H5 920 H6 906 L1 1842 L2 100.5 D006648_A 090650 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: Standard rail gauges: 1400, 1700, 2000, 2400, 2700, 3100, 3400, 3800 and 4200. Note: H1, M3 and weight calculated with min R. English 30/12/2011 57 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist NE, REEVING: 04 English 30/12/2011 58 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 26 DOUBLE GIRDER HOIST NE, REEVING: 06 Hoisting Speed (m/min) Load kg 20000 25000 30000 Class Fem/ISO 3m/M6 2m/M5 1Am/M4 E gear High Low 2.5 0.4 P6/T6 motor P6/T6 motor P6/T6 motor Hoist Dimensions HOL HOL* m m 5 3 7 5 9 7 12 10 15.5 13.5 20 18 26.5 24.5 32 30 *HOL with drum brake Motor Dimensions Motor M2 (mm) Weight (kg) Length code C D E F G H J K P6 536 85 F gear High Low 3.2 0.5 P6/T6 motor P6/T6 motor P7/T7 motor M1 mm 462 562 682 832 1022 1272 1622 1922 P7 576 105 M3 mm 714 799 799 949 1149 1469 1559 1944 P8 711 106 G gear High Low 4 0.7 P7/T7 motor P7/T7 motor P8/T8 motor H1 mm 654 739 739 889 1089 1409 1499 1884 T6 536 65 H gear High Low 5 T8 motor T8 motor T9 motor H2 mm 46 63 84 107 140 182 240 289 Min R mm 1400 1700 1700 2000 2400 3100 3400 4200 T7 536 71 J gear High Low 6.3 T9 motor T9 motor TA motor Max R mm 1400 2700 3100 3100 3100 3800 4200 4200 T8 536 81 T9 536 92 Weight kg 1570 1650 1700 1800 1940 2210 2430 2820 TA 576 106 Trolley Dimensions C 949 E1 488 L3 105 D1 (∅ ∅) 200 E2 600 L4 707 D2 (∅ ∅) 230 E3 80 L5 690 D3 (∅ ∅) 80 E4 1000 L6 100 WB 1410 E5 253 L7 226 W min 54 E6 173 M4 512 W max 99 H3 712 M5 44 H4 698 M6 218 H5 938 H6 924 L1 1862 L2 122 D006649_A 090651 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: Standard rail gauges: 1400, 1700, 2000, 2400, 2700, 3100, 3400, 3800 and 4200. Note: H1, M3 and weight calculated with min R. English 30/12/2011 59 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist NE, REEVING: 06 English 30/12/2011 60 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 27 DOUBLE GIRDER HOIST NE, REEVING: 08 Hoisting Speed (m/min) Load kg 32000 40000 Class Fem/ISO 2m/M5 1Am/M4 E gear High Low 2 0.3 P6/T6 motor P6/T6 motor Hoist Dimensions HOL HOL* m m 7 5.5 9 7.5 11.5 10 15 13.5 20 18.5 24 22.5 *HOL with drum brake Motor Dimensions Motor M2 (mm) Weight (kg) Length code E F G H J K P6 536 85 F gear High Low 2.5 0.4 P7/T7 motor P7/T7 motor M1 mm 682 832 1022 1272 1622 1922 P7 576 105 G gear High Low 3.2 0.5 P8/T8 motor M3 mm 799 949 1149 1469 1559 1944 P8 711 106 G gear High Low 3.2 T8 motor - H1 mm 739 889 1089 1409 1499 1884 T6 536 65 H2 mm 63 81 105 137 180 217 H gear High Low 4 T9 motor T9 motor Min R mm 1700 2000 2400 3100 3400 4200 T7 536 71 H gear High Low 5 TA motor TA motor Max R mm 3100 3100 3100 3800 4200 4200 T8 536 81 T9 536 92 Weight kg 1780 1880 2010 2280 2510 2890 TA 576 106 Trolley Dimensions C 1165 E1 488 L3 105 D1 (∅ ∅) 200 E2 600 L4 707 D2 (∅ ∅) 230 E3 80 L5 690 D3 (∅ ∅) 80 E4 1000 L6 100 WB 1410 E5 253 L7 226 W min 54 E6 173 M4 512 W max 99 H3 712 M5 44 H4 698 M6 218 H5 938 H6 924 L1 1862 L2 122 D006650_A 090652 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: Min R with service platform. Note: Standard rail gauges: 1700, 2000, 2400, 2700, 3100, 3400, 3800 and 4200. Note: H1, M3 and weight calculated with min R. English 30/12/2011 61 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist NE, REEVING: 08 English 30/12/2011 62 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 28 DOUBLE GIRDER HOIST NE, REEVING: 22 Hoisting Speed (m/min) Load kg 6300 8000 10000 E gear High Low 8 1.3 P6/T6 motor P6/T6 motor P6/T6 motor Class Fem/ISO 3m/M6 2m/M5 1Am/M4 Hoist Dimensions HOL HOL* m m 16.5 9 22 14.5 29.5 22 39 31.5 52 44.5 63.5 56 77 69.5 86.5 79 98 90.5 *HOL with drum brake Motor Dimensions Motor M2 (mm) Weight (kg) P6 536 85 F gear High Low 10 1.7 P6/T6 motor P6/T6 motor P7/T7 motor Length code E F G H J K L M N G gear High Low 12.5 2.1 P7/T7 motor P7/T7 motor P8/T8 motor M1 mm 682 832 1022 1272 1622 1922 2272 2522 2822 P7 576 105 P8 711 106 M3 mm 359 434 339 364 389 389 414 439 489 T6 536 65 H gear High Low 16 T8 motor T8 motor T9 motor Min R mm 1400 1700 1700 2000 2400 2700 3100 3400 3800 T7 536 71 J gear High Low 20 T9 motor T9 motor TA motor Max R mm 2000 2400 2700 3100 3400 3400 3400 3800 4200 T8 536 81 Weight kg 1310 1380 1440 1560 1720 1890 2090 2240 2430 T9 536 92 TA 576 106 Trolley Dimensions C 807 E1 488 L3 111 D1 (∅ ∅) 140 E2 600 L4 707 D2 (∅ ∅) 170 E3 18 L5 627 D3 (∅ ∅) 63 E4 1000 L6 100 WB 1500 E5 253 L7 163 W min 54 E6 173 M4 472 W max 84 H3 757 M5 44 H4 743 M6 218 H5 920 H6 906 L1 1834 L2 100.5 D006651_A 090653 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: Min R with service platform. Note: Standard rail gauges: 1400, 1700, 2000, 2400, 2700, 3100, 3400, 3800 and 4200. Note: M3 and weight calculated with min R. English 30/12/2011 63 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist NE, REEVING: 22 English 30/12/2011 64 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 29 DOUBLE GIRDER HOIST NE, REEVING: 24 Hoisting Speed (m/min) Load kg 12500 16000 20000 E gear High Low 4 0.7 P6/T6 motor P6/T6 motor P6/T6 motor Class Fem/ISO 3m/M6 2m/M5 1Am/M4 Hoist Dimensions HOL HOL* m m 8 4 11 7 14.5 10.5 19.5 15.5 26 22 31.5 27.5 38.5 34.5 43 39 49 45 *HOL with drum brake Motor Dimensions Motor M2 (mm) Weight (kg) P6 536 85 F gear High Low 5 0.8 P6/T6 motor P6/T6 motor P7/T7 motor Length code E F G H J K L M N G gear High Low 6.3 1.1 P7/T7 motor P7/T7 motor P8/T8 motor M1 mm 682 832 1022 1272 1622 1922 2272 2522 2822 P7 576 105 P8 711 106 M3 mm 359 434 339 364 389 389 414 439 489 T6 536 65 H gear High Low 8 T8 motor T8 motor T9 motor Min R mm 1400 1700 1700 2000 2400 2700 3100 3400 3800 T7 536 71 J gear High Low 10 T9 motor T9 motor TA motor Max R mm 2000 2400 2700 3100 3400 3400 3400 3800 4200 T8 536 81 Weight kg 1380 1450 1520 1640 1800 1970 2170 2320 2510 T9 536 92 TA 576 106 Trolley Dimensions C 1115 E1 488 L3 111 D1 (∅ ∅) 140 E2 600 L4 707 D2 (∅ ∅) 170 E3 18 L5 627 D3 (∅ ∅) 63 E4 1000 L6 100 WB 1500 E5 253 L7 163 W min 54 E6 173 M4 472 W max 84 H3 757 M5 44 H4 743 M6 218 H5 920 H6 906 L1 1834 L2 100.5 D006652_A 090654 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: Standard rail gauges: 1400, 1700, 2000, 2400, 2700, 3100, 3400, 3800 and 4200. Note: M3 and weight calculated with the Min R. English 30/12/2011 65 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist NE, REEVING: 24 English 30/12/2011 66 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 30 DOUBLE GIRDER HOIST NE, REEVING: 26 Hoisting Speed (m/min) Load kg 20000 25000 30000 E gear High Low 2.5 0.4 P6/T6 motor P6/T6 motor P6/T6 motor Class Fem/ISO 3m/M6 2m/M5 1Am/M4 Hoist Dimensions HOL HOL* m m 5.5 3 7 4.5 9.5 7 13 10.5 17 14.5 21 18.5 25.5 23 28.5 26 32.5 30 *HOL with drum brake Motor Dimensions Motor M2 (mm) Weight (kg) P6 536 85 F gear High Low 3.2 0.5 P6/T6 motor P6/T6 motor P7/T7 motor Length code E F G H J K L M N G gear High Low 4 0.7 P7/T7 motor P7/T7 motor P8/T8 motor M1 mm 682 832 1022 1272 1622 1922 2272 2522 2822 P7 576 105 P8 711 106 M3 mm 359 434 339 364 389 389 414 439 489 T6 536 65 H gear High Low 5 T8 motor T8 motor T9 motor Min R mm 1400 1700 1700 2000 2400 2700 3100 3400 3800 T7 536 71 J gear High Low 6.3 T9 motor T9 motor TA motor Max R mm 2000 2400 2700 3100 3400 3400 3400 3800 4200 T8 536 81 Weight kg 1650 1730 1800 1920 2100 2280 2490 2660 2870 T9 536 92 TA 576 106 Trolley Dimensions C 1154 E1 488 L3 129 D1 (∅ ∅) 200 E2 600 L4 707 D2 (∅ ∅) 230 E3 80 L5 690 D3 (∅ ∅) 80 E4 1000 L6 100 WB 1410 E5 253 L7 226 W min 54 E6 173 M4 512 W max 99 H3 712 M5 44 H4 698 M6 218 H5 938 H6 924 L1 1852 L2 122 D006653_A 090655 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: Min R with service platform. Note: Standard rail gauges: 1400, 1700, 2000, 2400, 2700, 3100, 3400, 3800 and 4200. Note: M3 and weight calculated wit the Min R. English 30/12/2011 67 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist NE, REEVING: 26 English 30/12/2011 68 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 31 DOUBLE GIRDER HOIST NE, REEVING: 28 Hoisting Speed (m/min) Load kg 32000 40000 Class Fem/ISO 2m/M5 1Am/M4 E gear High Low 2 0.3 P6/T6 motor P6/T6 motor Hoist Dimensions HOL HOL* m m 5.5 3.5 7 5 9.5 7.5 13 11 15.5 13.5 19 17 21.5 19.5 24.5 22.5 *HOL with drum brake Motor Dimensions Motor M2 (mm) Weight (kg) F gear High Low 2.5 0.4 P7/T7 motor P7/T7 motor Length code F G H J K L M N P6 536 85 G gear High Low 3.2 0.5 P8/T8 motor M1 mm 832 1022 1272 1622 1922 2272 2522 2822 P7 576 105 P8 711 106 G gear High Low 3.2 T8 motor - M3 mm 434 339 364 389 389 414 439 489 T6 536 65 H gear High Low 4 T9 motor T9 motor Min R mm 1700 1700 2000 2400 2700 3100 3400 3800 T7 536 71 H gear High Low 5 TA motor TA motor Max R mm 2400 2700 3100 3400 3400 3400 3800 4200 T8 536 81 Weight kg 1850 1920 2050 2230 2400 2620 2790 3010 T9 536 92 TA 576 106 Trolley Dimensions C 1280 E1 488 L3 129 D1 (∅ ∅) 200 E2 600 L4 707 D2 (∅ ∅) 230 E3 80 L5 690 D3 (∅ ∅) 80 E4 1000 L6 100 WB 1410 E5 253 L7 226 W min 54 E6 173 M4 512 W max 99 H3 712 M5 44 H4 698 M6 218 H5 938 H6 924 L1 1852 L2 122 D006654_A 090656 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: Min R with service platform. Note: Standard rail gauges: 1700, 2000, 2400, 2700, 3100, 3400, 3800 and 4200. Note: M3 and weight calculated with the Min R. English 30/12/2011 69 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist NE, REEVING: 28 English 30/12/2011 70 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 32 DOUBLE GIRDER HOIST NF, REEVING: 22 Hoisting Speed (m/min) Load kg 12500 16000 20000 Class Fem/ISO 3m/M6 2m/M5 1Am/M4 E gear High Low 8 1.2 P6/T6 motor P6/T6 motor P6/T6 motor Hoist Dimensions HOL HOL* m m 15.5 9 20.5 14 27.5 21 37.5 31 46 39.5 55.5 49 62.5 56 71 64.5 *HOL with drum brake Motor Dimensions Motor M2 (mm) Weight (kg) P6 536 85 F gear High Low 10 1.6 P6/T6 motor P6/T6 motor P7/T7 motor Length code F G H J K L M N P7 576 105 G gear High Low 12.5 2 P7/T7 motor P7/T7 motor T8 motor M1 mm 832 1022 1272 1622 1922 2272 2522 2822 T6 536 65 M3 mm 434 339 214 389 389 414 439 489 T7 536 71 H gear High Low 16 T8 motor T8 motor T9 motor Min R mm 1700 1700 2000 2400 2700 3100 3400 3800 T8 536 81 J gear High Low 20 T9 motor T9 motor - Max R mm 2400 2700 3100 3100 3100 3400 3800 4200 Weight kg 1800 1950 2080 2270 2430 2620 2780 2970 T9 536 92 Trolley Dimensions C 960 E1 488 L3 106 D1 (∅ ∅) 200 E2 600 L4 707 D2 (∅ ∅) 230 E3 80 L5 690 D3 (∅ ∅) 80 E4 1000 L6 100 WB 1410 E5 305 L7 226 W min 54 E6 173 M4 512 W max 99 H3 712 M5 44 H4 698 M6 218 H5 938 H6 924 L1 1857 L2 122 D006655_A 090657 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: Min R with service platform. Note: Standard rail gauges: 1700, 2000, 2400, 2700, 3100, 3400, 3800 and 4200. Note: M3 and weight calculated with min R. English 30/12/2011 71 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist NF, REEVING: 22 English 30/12/2011 72 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 33 DOUBLE GIRDER HOIST NF, REEVING: 24 Hoisting Speed (m/min) Load kg 25000 32000 40000 E gear High Low 4 0.6 P6/T6 motor P6/T6 motor P6/T6 motor Class Fem/ISO 3m/M6 2m/M5 1Am/M4 Hoist Dimensions HOL HOL* m m 7.5 4 10 6.5 13.5 10 18.5 15 23 19.5 27.5 24 31 27.5 35.5 32 *HOL with drum brake Motor Dimensions Motor P6 M2 (mm) 536 Weight (kg) 85 F gear High Low 5 0.8 P6/T6 motor P6/T6 motor P7/T7 motor Length code F G H J K L M N P7 576 105 G gear High Low 6.3 1 P7/T7 motor P7/T7 motor T8 motor M1 mm 832 1022 1272 1622 1922 2272 2522 2822 T6 536 65 M3 mm 434 339 214 389 389 414 439 489 T7 536 71 H gear High Low 8 T8 motor T8 motor T9 motor Min R mm 1700 1700 2000 2400 2700 3100 3400 3800 T8 536 81 T9 536 92 W max 99 H3 712 M5 44 H4 698 M6 218 J gear High Low 10 T9 motor T9 motor - Max R mm 2400 2700 3100 3100 3100 3400 3800 4200 Weight kg 2040 2200 2330 2530 2680 2880 3030 3230 Trolley Dimensions C 1305 E1 488 L3 106 D1 (∅ ∅) 200 E2 600 L4 707 D2 (∅ ∅) 230 E3 80 L5 690 D3 (∅ ∅) 80 E4 1000 L6 100 WB 1410 E5 305 L7 226 W min 54 E6 173 M4 512 H5 938 H6 924 L1 1857 L2 122 D006656_A 090658 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: Min R with service platform. Note: Standard rail gauges: 1700, 2000, 2400, 2700, 3100, 3400, 3800 and 4200. Note: M3 and weight calculated with min R. English 30/12/2011 73 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist NF, REEVING: 24 English 30/12/2011 74 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 34 DOUBLE GIRDER HOIST NF, REEVING: 26 Hoisting Speed (m/min) Load kg 40000 50000 60000 E gear High Low 2.5 0.4 P6/T6 motor P6/T6 motor P6/T6 motor Class Fem/ISO 3m/M6 2m/M5 1Am/M4 Hoist Dimensions HOL HOL* m m 5 2.5 6.5 4 9 6.5 12.5 10 15 12.5 18.5 16 20.5 18 23.5 21 *HOL with drum brake Motor Dimensions Motor P6 M2 (mm) 536 Weight (kg) 85 F gear High Low 3.2 0.5 P6/T6 motor P6/T6 motor P7/T7 motor Length code F G H J K L M N P7 576 105 G gear High Low 4 0.6 P7/T7 motor P7/T7 motor T8 motor M1 mm 832 1022 1272 1622 1922 2272 2522 2822 T6 536 65 M3 mm 434 339 214 389 389 414 439 489 T7 536 71 H gear High Low 5 T8 motor T8 motor T9 motor Min R mm 1700 1700 2000 2400 2700 3100 3400 3800 T8 536 81 T9 536 92 W max 89 H3 687 M5 44 H4 653 M6 218 J gear High Low 6.3 T9 motor T9 motor - Max R mm 2400 2700 3100 3100 3100 3400 3800 4200 Weight kg 2530 2690 2830 3070 3310 3580 3790 4040 Trolley Dimensions C 1354 E1 488 L3 117 D1 (∅ ∅) 250 E2 600 L4 707 D2 (∅ ∅) 280 E3 107 L5 717 D3 (∅ ∅) 100 E4 1000 L6 150 WB 1340 E5 305 L7 262 W min 54 E6 173 M4 589 H5 949 H6 915 L1 1868 L2 125 D006657_A 090659 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: Min R with service platform. Note: Standard rail gauges: 1700, 2000, 2400, 2700, 3100, 3400, 3800 and 4200. Note: M3 and weight calculated with min R. English 30/12/2011 75 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist NF, REEVING: 26 English 30/12/2011 76 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 35 DOUBLE GIRDER HOIST NF, REEVING: 28 Hoisting Speed (m/min) Load kg 63000 80000 Class Fem/ISO 2m/M5 1Am/M4 E gear High Low 2 0.3 P6/T6 motor P6/T6 motor Hoist Dimensions HOL HOL* m m 6.5 4.5 9 7 11 9 13.5 11.5 15.5 13.5 17.5 15.5 *HOL with drum brake Motor Dimensions Motor P6 M2 (mm) 536 Weight (kg) 85 F gear High Low 2.5 0.4 P6/T6 motor P7/T7 motor Length code H J K L M N P7 576 105 G gear High Low 3.2 0.5 P7/T7 motor T8 motor M1 mm 1272 1622 1922 2272 2522 2822 T6 536 65 M3 mm 364 389 389 414 439 489 T7 536 71 H gear High Low 4 T8 motor T9 motor Min R mm 2400 2400 2700 3100 3400 3800 T8 536 81 T9 536 92 W max 89 H3 687 M5 44 H4 733 M6 218 J gear High Low 5 T9 motor - Max R mm 3100 3100 3100 3400 3800 4200 Weight kg 3380 3610 3860 4140 4330 4590 Trolley Dimensions C 1410 E1 488 L3 117 D1 (∅ ∅) 250 E2 600 L4 707 D2 (∅ ∅) 280 E3 142 L5 752 D3 (∅ ∅) 100 E4 1000 L6 150 WB 1420 E5 305 L7 262 W min 54 E6 173 M4 589 H5 949 H6 995 L1 1867 L2 154 D006658_A 090660 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: Min R with service platform. Note: Standard rail gauges: 2400, 2700, 3100, 3400, 3800 and 4200. Note: M3 and weight calculated with min R. English 30/12/2011 77 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist NF, REEVING: 28 English 30/12/2011 78 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 36 TWO HOIST TROLLEY ND 04 + NC 02 Main hoist ND 04 hoisting speed (m/min) Load Class E gear + P5 motor kg Fem/ISO High Low 6300 3m/M6 4 0.7 8000 3m/M6 4 0.7 10000 2m/M5 4 0.7 125000 1Am/M4 4 0.7 Main hoist ND 04 motor dimensions Motor P5 P6 M2 (mm) 567 567 Weight ( kg) 58 85 F gear + P5 motor High Low 5 0.8 5 0.8 5 0.8 - J gear + P7 motor High Low 10 1.7 10 1.7 10 1.7 - Main hoist ND 04 cover plate dimensions L6 L13 L6* L13* 542 28 522 48 P7 607 105 Auxiliary hoist NC 02 hoisting speed (m/min) Load Class E gear + P3 motor kg Fem/ISO High Low 2000 3m/M6 8 1.3 2500 2m/M5 8 1.3 3200 1Am/M4 8 1.3 Auxiliary hoist NC 02 motor dimensions Motor P3 P4 M1 (mm) 449 542 Weight ( kg) 35 53 H gear + P6 motor High Low 8 1.3 8 1.3 8 1.3 - F gear + P3 motor High Low 10 1.7 10 1.7 - H gear + P4 motor High Low 16 2.7 16 2.7 - Auxiliary hoist NC 02 cover plate dimensions L7 L8 L15 L7* 1813 510 60 1849 Hoist dimensions (main hoist ND 04 + auxiliary hoist NC 02) HOL1 HOL2 Drum ND 04 NC 02 Min R Max R H1 lengths m m mm mm mm D+B 9 9 1400 2000 640 E+B 12 12 1400 2000 640 H2 mm 88 118 H3 mm 559 559 H4 mm 95 95 M3 mm 408 408 L8* 494 M4 mm 472 472 L15* 76 Weight Min R Weight Max R kg 880 900 kg 980 1000 L16 455 L28 85 L17 305 L29 163 Trolley dimensions C1 553 L1 432 L18 618 L30 121 C2 404 L2 432 L19 468 L31 346 D1 (∅ ∅) 140 L3 400 L20 712 D2 (∅ ∅) 170 L4 18 L21 380 HTH 640 L5 100 L22 149 WB 1400 L9 423 L23 548 WW min 50 L10 337 L24 163 WW max 85 L11 108 L25 69 L12 87 L26 300 L14 90 L27 1217 D004568_A 063932 Note: Weight calculated with smallest P motor. Note: All dimensions in mm. Note: Standard rail gauges: 1400, 1700 and 2000. Note: H- and M- dimensions with min R. *Please, disregard the dimensions L6*, L7*, L8*, L13* and L15*. English 30/12/2011 79 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Two Hoist Trolley ND 04 + NC 02 Note.1: travelling machinery inside when R=>1700. Note.2: travelling machinery inside when R=>2000. English 30/12/2011 80 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 37 TWO HOIST TROLLEY ND 04 + NC 04 Main hoist ND 04 hoisting speed (m/min) Load Class E gear + P5 motor kg Fem/ISO High Low 6300 3m/M6 4 0.7 8000 3m/M6 4 0.7 10000 2m/M5 4 0.7 12500 1Am/M4 4 0.7 Main hoist ND 04 motor dimensions Motor P5 P6 M2 (mm) 567 567 Weight ( kg) 58 85 F gear + P5 motor High Low 5 0.8 5 0.8 5 0.8 - J gear + P7 motor High Low 10 1.7 10 1.7 10 1.7 - Main hoist ND 04 cover plate dimensions L6 L13 L6* L13* 541 28 521 48 P7 607 105 Auxiliary hoist NC 04 hoisting speed (m/min) Load Class E gear + P3 motor kg Fem/ISO High Low 4000 3m/M6 4 0.7 5000 2m/M5 4 0.7 6300 1Am/M4 4 0.7 Auxiliary hoist NC 04 motor dimensions Motor P3 M1 (mm) 449 Weight ( kg) 35 H gear + P6 motor High Low 8 1.3 8 1.3 8 1.3 - F gear + P3 motor High Low 5 0.8 5 0.8 - H gear + P4 motor High Low 8 1.3 8 1.3 - Auxiliary hoist NC 04 cover plate dimensions P4 542 53 L7 1814 Hoist dimensions (main hoist ND 04 + auxiliary hoist HOL1 HOL2 Drum ND 04 NC 04 Min R Max R lengths m m mm mm D+C 9 9 1400 2000 E+D 12 12 1400 2000 L8 510 L15 60 L7* 1850 L8* 494 L15* 76 M3 mm 408 408 M4 mm 472 472 Weight Min R kg 910 930 Weight Max R kg 1010 1030 L16 455 L28 85 L17 327 L29 163 NC 04) H1 mm 640 640 H2 mm 88 118 H3 mm 637 637 H4 mm 74 99 Trolley dimensions C1 553 L1 432 L18 618 L30 121 C2 385 L2 432 L19 490 L31 446 D1 (∅ ∅) 140 L3 400 L20 712 D2 (∅ ∅) 170 L4 18 L21 380 HTH 618 L5 100 L22 149 WB 1400 L9 423 L23 548 WW min 50 L10 337 L24 163 WW max 85 L11 103 L25 69 L12 87 L26 300 L14 90 L27 1217 D004558_A 063934 Note: Weight calculated with P3 motor. Note: All dimensions in mm. Note: Standard rail gauges: 1400, 1700 and 2000. Note: H- and M- dimensions with min R. *Please, disregard the dimensions L6*, L7*, L8*, L13* and L15*. English 30/12/2011 81 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Two Hoist Trolley ND 04 + NC 04 English 30/12/2011 82 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 38 TWO HOIST TROLLEY NE 04 + NC 02 Main hoist NE 04 hoisting speed (m/min) E gear Load Class High Low kg Fem/ISO 4 0.7 12500 3m/M6 P6/T6 motor 16000 2m/M5 P6/T6 motor 20000 1Am/M4 P6/T6 motor Main hoist NE 04 motor dimensions Motor P6 P7 M2 (mm) 536 576 Weight ( kg) 85 105 F gear High Low 5 0.8 P6/T6 motor P6/T6 motor P7/T7 motor P8 711 106 T6 536 65 Auxiliary hoist NC 02 hoisting speed (m/min) Load Class E gear + P3 motor kg Fem/ISO High Low 2000 3m/M6 8 1.3 2500 2m/M5 8 1.3 3200 1Am/M4 8 1.3 Auxiliary hoist NC 02 motor dimensions Motor P3 P4 M1 (mm) 449 542 Weight ( kg) 35 53 G gear High Low 6.3 1.1 P7/T7 motor P7/T7 motor P8/T8 motor T7 536 71 T8 536 81 F gear + P3 motor High Low 10 1.7 10 1.7 - H gear High Low 8 T8 motor T8 motor T9 motor T9 536 92 J gear High Low 10 T9 motor T9 motor TA motor TA 576 106 H gear + P4 motor High Low 16 2.7 16 2.7 - Auxiliary hoist NC 02 cover plate dimensions L17 L17* 41 25 Hoist dimensions (main hoist NE 04 + auxiliary hoist NC 02) HOL1 HOL2 Drum NE 04 NC 02 Min R Max R H1 lengths m m mm mm mm D+B 10.5 12 1700 2400 788 E+C 14 18 1700 2700 788 F+C 18 18 2000 2700 931 H2 mm 94 125 161 H3 mm 709 709 859 H4 mm 95 144 144 M3 mm 784 784 934 M4 mm 622 622 772 Weight Min R kg 1550 1850 1950 Weight Max R kg 1800 2200 2250 Trolley dimensions C1 922 L1 514 L13 400 L26 213 C2 439 L2 514 L14 648 L27 480 D1(∅ ∅) 200 L3 600 L15 55 L28 1013 D2(∅ ∅) 230 L4 3 L16 25 L29 154 HTH 752 L5 123 L18 532 L30 188 WB 1800 L6 541 L19 692 L31 213 WW min 55 L7 2251 L20 356 L32 256 WW max 100 L8 503 L21 905 L33 221 L9 612 L22 569 L34 179 L10 88 L23 478 L35 600 L11 97 L24 562 L36 121 L12 25 L25 218 L37 346 D004578_A 063871 Note: Weight calculated with smallest P motors. Note: All dimensions in mm. Note: Standard rail gauges: 1700, 2000, 2400 and 2700. Note: H- and M- dimensions with min R. * Please, disregard the dimension L17*. English 30/12/2011 83 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Two Hoist Trolley NE 04 + NC 02 Note.1: Travelling machinery inside when R=>2400 English 30/12/2011 84 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 39 TWO HOIST TROLLEY NE 04 + NC 04 Main hoist NE 04 hoisting speed (m/min) E gear Load Class High Low kg Fem/ISO 4 0.7 12500 3m/M6 P6/T6 motor 16000 2m/M5 P6/T6 motor 20000 1Am/M4 P6/T6 motor Main hoist NE 04 motor dimensions Motor P6 P7 M2 (mm) 536 576 Weight ( kg) 85 105 F gear High Low 5 0.8 P6/T6 motor P6/T6 motor P7/T7 motor P8 711 106 T6 536 65 Auxiliary hoist NC 04 hoisting speed (m/min) Load Class E gear + P3 motor kg Fem/ISO High Low 4000 3m/M6 4 0.7 5000 2m/M5 4 0.7 6300 1Am/M4 4 0.7 Auxiliary hoist NC 04 motor dimensions Motor P3 P4 M1 (mm) 449 542 Weight ( kg) 35 53 G gear High Low 6.3 1.1 P7/T7 motor P7/T7 motor P8/T8 motor T7 536 71 T8 536 81 F gear + P3 motor High Low 5 0.8 5 0.8 - H gear High Low 8 T8 motor T8 motor T9 motor T9 536 92 J gear High Low 10 T9 motor T9 motor TA motor TA 576 106 H gear + P4 motor High Low 8 1.3 8 1.3 - Auxiliary hoist NC 04 cover plate dimensions L16 L16* 41 25 Hoist dimensions (main hoist NE 04 + auxiliary hoist NC 04) HOL1 HOL2 Drum NE 04 NC 04 Min R Max R H1 lengths m m mm mm mm D+D 10.5 12 1700 2400 788 E+E 14 15 1700 2700 788 H2 mm 94 125 H3 mm 787 787 H4 mm 99 129 M3 mm 784 784 M4 mm 622 622 Weight Min R kg 1600 1850 Weight Max R kg 2050 2250 Trolley dimensions C1 922 L1 514 L13 643 L26 480 C2 430 L2 514 L14 55 L27 1013 D1(∅ ∅) 200 L3 600 L15 25 L28 154 D2(∅ ∅) 230 L4 3 L17 692 L29 188 HTH 730 L5 123 L18 378 L30 130 WB 1800 L6 541 L19 905 L31 213 WW min 55 L7 2251 L20 591 L32 256 WW max 100 L8 502 L21 478 L33 503 L9 612 L22 562 L34 179 L10 97 L23 218 L35 121 L11 88 L24 213 L36 600 L12 25 L25 522 L37 546 D004577_A 063870 Note: Weight calculated with smallest P motors. Note: All dimensions in mm. Note: Standard rail gauges: 1700, 2000, 2400 and 2700. Note: H- and M- dimensions with min R. * Please, disregard the dimension L16*. English 30/12/2011 85 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Two Hoist Trolley NE 04 + NC 04 Note.1: travelling machinery inside when R=>2000. Note.2: travelling machinery inside when R=>2000. English 30/12/2011 86 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 40 TWO HOIST TROLLEY NE 04 + ND 02 Main hoist NE 04 hoisting speed (m/min) E gear Load Class High Low kg Fem/ISO 4 0.7 12500 3m/M6 P6/T6 motor 16000 2m/M5 P6/T6 motor 20000 1Am/M4 P6/T6 motor Main hoist NE 04 motor dimensions Motor P6 P7 M2 (mm) 536 576 Weight ( kg) 85 105 F gear High Low 5 0.8 P6/T6 motor P6/T6 motor P7/T7 motor P8 711 106 T6 536 65 Auxiliary hoist ND 02 hoisting speed (m/min) Load Class E gear + P5/T5 motor kg Fem/ISO High Low 4000 3m/M6 8 1.3 5000 2m/M5 8 1.3 6300 1Am/M4 8 1.3 T7 536 71 P5 567 58 P6 567 85 T8 536 81 F gear + P5/T5 motor High Low 10 1.7 10 1.7 - Auxiliary hoist ND 02 motor dimensions Motor M1 (mm) Weight ( kg) G gear High Low 6.3 1.1 P7/T7 motor P7/T7 motor P8/T8 motor H gear High Low 8 T8 motor T8 motor T9 motor T9 536 92 TA 576 106 H gear + P6/T6 motor High Low 16 2.7 16 2.7 - Auxiliary hoist ND 02 cover plate dimensions L8 L16 L8* 561 42 541 P7 607 105 Hoist dimensions (main hoist NE 04 + auxiliary hoist ND 02) HOL1 HOL2 Drum NE 04 ND 02 Min R Max R H1 lengths m m mm mm mm F+D 18 18 2000 2700 931 H2 mm 161 H3 mm 858 H4 mm 176 J gear High Low 10 T9 motor T9 motor TA motor M3 mm 934 J gear + P7/T7 motor High Low 20 3.3 20 3.3 - L16* 62 M4 mm 708 Weight Min R kg 2150 Weight Max R kg 2500 L11 97 L24 218 L12 25 L25 213 L13 643 L26 1013 Trolley dimensions C1 922 L1 123 L14 55 L27 201 C2 627 L2 478 L15 22 L28 213 D1 (∅ ∅) 200 L3 600 L17 532 L29 256 D2 (∅ ∅) 230 L4 3 L18 692 L30 216 HTH 748 L5 514 L19 360 L31 192 WB 1800 L6 541 L20 905 L32 149 WW min 55 L7 2272 L21 573 L33 548 WW max 100 L9 612 L22 478 L34 600 L10 88 L23 832 D004576_A 063869 Note: Weight calculated with smallest P motors. Note: All dimensions in mm. Note: Standard rail gauges: 2000, 2400 and 2700. Note: H- and M- dimensions with min R. * Please, disregard the dimensions L8* and L16*. English 30/12/2011 87 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Two Hoist Trolley NE 04 + ND 02 English 30/12/2011 88 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 41 TWO HOIST TROLLEY NE 04 + ND 04 Main hoist NE 04 hoisting speed (m/min) E gear Load Class High Low kg Fem/ISO 4 0.7 12500 3m/M6 P6/T6 motor 16000 2m/M5 P6/T6 motor 20000 1Am/M4 P6/T6 motor Main hoist NE 04 motor Motor M2 (mm) Weight ( kg) dimensions P6 536 85 F gear High Low 5 0.8 P6/T6 motor P6/T6 motor P7/T7 motor P7 576 105 P8 711 106 Auxiliary hoist ND 04 hoisting speed (m/min) Load Class E gear + P5 motor kg Fem/ISO High Low 6300 3m/M6 4 0.7 8000 3m/M6 4 0.7 10000 2m/M5 4 0.7 12500 1Am/M4 4 0.7 Auxiliary hoist ND 04 motor dimensions Motor P5 P6 M1 (mm) 567 567 Weight ( kg) 58 85 G gear High Low 6.3 1.1 P7/T7 motor P7/T7 motor P8/T8 motor T6 536 65 H gear High Low 8 T8 motor T8 motor T9 motor T7 536 71 F gear + P5 motor High Low 5 0.8 5 0.8 5 0.8 - T8 536 81 J gear High Low 10 T9 motor T9 motor TA motor T9 536 92 H gear + P6 motor High Low 8 1.3 8 1.3 8 1.3 - TA 576 106 J gear + P7 motor High Low 10 1.7 10 1.7 10 1.7 - Auxiliary hoist ND 04 cover plate dimensions L8 L16 L8* L16* 561 42 541 62 P7 607 105 Hoist dimensions (main hoist NE 04 + auxiliary hoist ND 04) HOL1 HOL2 Drum NE 04 ND 04 Min R Max R H1 lengths m m mm mm mm D+E 10.5 12 1700 2400 788 E+F 14 16 1700 2700 788 F+G 18 20 2000 2700 931 H2 mm 94 125 161 H3 mm 790 753 903 H4 mm 118 156 204 M3 mm 784 784 934 M4 mm 558 521 671 Weight Min R kg 2050 2100 2250 Weight Max R kg 2350 2550 2650 Trolley dimensions C1 922 L4 3 L18 692 L30 143 C2 564 L5 123 L19 391 L31 213 D1 (∅ ∅) 200 L6 541 L20 905 L32 256 D2 (∅ ∅) 230 L7 2272 L21 604 L33 498 HTH 717 L9 612 L22 478 L34 192 WB 1800 L10 88 L23 562 L35 668 WW min 55 L11 97 L24 218 L36 600 WW max 100 L12 25 L25 213 L37 149 L13 643 L26 480 L1 L2 L3 514 L14 55 L27 104 514 L15 22 L28 1013 600 L17 532 L29 201 D004575_A 063868 Note: Weight calculated with smallest P motors. Note: All dimensions in mm. Note: Standard rail gauges: 1700, 2000, 2400 and 2700. Note: H- and M- dimensions with min R. * Please, disregard the dimensions L8* and L16*. English 30/12/2011 89 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Two Hoist Trolley NE 04 + ND 04 Note.1: travelling machinery inside when R=>2000. Note.2: travelling machinery inside when R=>2400. English 30/12/2011 90 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 42 TWO HOIST TROLLEY NE 06 + NC 04 Main hoist NE 06 hoisting speed (m/min) E gear Load Class High Low kg Fem/ISO 4 0.7 20000 3m/M6 P6/T6 motor 25000 2m/M5 P6/T6 motor 30000 1Am/M4 P6/T6 motor Main hoist NE 06 motor dimensions Motor P6 P7 M2 (mm) 536 576 Weight ( kg) 85 105 F gear High Low 5 0.8 P6/T6 motor P6/T6 motor P7/T7 motor P8 711 106 T6 536 65 Auxiliary hoist NC 04 hoisting speed (m/min) Load Class E gear + P3 motor kg Fem/ISO High Low 4000 3m/M6 4 0.7 5000 2m/M5 4 0.7 6300 1Am/M4 4 0.7 Auxiliary hoist NC 04 motor dimensions Motor P3 P4 M1 (mm) 449 542 Weight ( kg) 35 53 G gear High Low 6.3 1.1 P7/T7 motor P7/T7 motor P8/T8 motor T7 536 71 T8 536 81 F gear + P3 motor High Low 5 0.8 5 0.8 - H gear High Low 8 T8 motor T8 motor T9 motor T9 536 92 J gear High Low 10 T9 motor T9 motor TA motor TA 576 106 H gear + P4 motor High Low 8 1.3 8 1.3 - Auxiliary hoist NC 04 cover plate dimensions L17 L17* 41 25 Hoist dimensions (main hoist NE 06 + auxiliary hoist NC 04) HOL1 HOL2 Drum NE 06 NC 04 Min R Max R H1 lengths m m mm mm mm D+C 7 9 1700 2400 810 E+C 9 9 1700 2700 810 F+D 12 12 2000 2700 936 G+E 15.5 15 2400 2700 1117 H2 mm 63 84 107 140 H3 mm 787 787 937 1137 H4 mm 74 74 99 129 M3 mm 784 784 934 1134 M4 mm 622 622 772 972 L12 25 L25 218 L37 446 L1 514 L13 643 L26 213 L38 121 Weight Min R kg 1850 1900 2050 2250 Weight Max R kg 2250 2300 2350 2400 L2 514 L14 55 L27 480 L3 600 L15 402 L28 522 Trolley dimensions C1 1062 L4 3 L16 25 L29 154 C2 430 L5 123 L18 532 L30 1013 D1 (∅ ∅) 200 L6 541 L19 713 L31 188 D2 (∅ ∅) 230 L7 2251 L20 378 L32 256 HTH 709 L8 502 L21 926 L33 213 WB 1800 L9 612 L22 591 L34 221 WW min 55 L10 97 L23 478 L35 179 WW max 100 L11 88 L24 562 L36 600 D004580_A 063873 Note: Weight calculated with smallest P motors. Note: All dimensions in mm. Note: Standard rail gauges: 1700, 2000, 2400 and 2700. Note: H- and M- dimensions with min R. * Please, disregard the dimension L17*. English 30/12/2011 91 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Two Hoist Trolley NE 06 + NC 04 Note.1: travelling machinery inside when R=>2000. Note.2: travelling machinery inside when R=>2400. English 30/12/2011 92 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 43 TWO HOIST TROLLEY NE 06 + ND 04 Main hoist NE 06 hoisting speed (m/min) E gear Load Class High Low kg Fem/ISO 2.5 0.4 20000 3m/M6 P6/T6 motor 25000 2m/M5 P6/T6 motor 30000 1Am/M4 P6/T6 motor Main hoist NE 06 motor dimensions Motor P6 P7 M2 (mm) 536 576 Weight ( kg) 85 105 F gear High Low 3.2 0.5 P6/T6 motor P6/T6 motor P7/T7 motor P8 711 106 T6 536 65 Auxiliary hoist ND 04 hoisting speed (m/min) Load Class E gear + P5 motor kg Fem/ISO High Low 6300 3m/M6 4 0.7 8000 3m/M6 4 0.7 10000 2m/M5 4 0.7 12500 1Am/M4 4 0.7 T7 536 71 P5 567 58 P6 567 85 T8 536 81 F gear + P5 motor High Low 5 0.8 5 0.8 5 0.8 - Auxiliary hoist ND 04 motor dimensions Motor M1 (mm) Weight ( kg) G gear High Low 4 0.7 P7/T7 motor P7/T7 motor P8/T8 motor H gear High Low 5 T8 motor T8 motor T9 motor T9 536 92 P7 607 105 Hoist dimensions (main hoist NE 06 + auxiliary hoist ND 04) HOL1 HOL2 Drum NE 06 ND 04 Min R Max R H1 lengths m m mm mm mm D+D 7 9 1700 2400 810 E+D 9 9 1700 2700 810 F+E 12 12 2000 2700 936 G+F 15.5 16 2400 2700 1117 H2 mm 63 84 107 140 H3 mm 790 790 940 1103 TA 576 106 H gear + P6 motor High Low 8 1.3 8 1.3 8 1.3 - Auxiliary hoist ND 04 cover plate dimensions L8 L16 L8* 561 42 541 H4 mm 88 88 118 156 M3 mm 784 784 934 1134 J gear High Low 6.3 T9 motor T9 motor TA motor J gear + P7 motor High Low 10 1.7 10 1.7 10 1.7 - L16* 62 M4 mm 558 558 708 821 Weight Min R kg 2100 2150 2300 2600 Weight Max R kg 2550 2600 2650 2750 L2 514 L15 22 L28 104 L3 600 L17 532 L29 1013 Trolley dimensions C1 1062 L4 3 L18 713 L30 201 C2 564 L5 123 L19 391 L31 216 D1 (∅ ∅) 200 L6 541 L20 926 L32 256 D2 (∅ ∅) 230 L7 2272 L21 604 L33 213 HTH 696 L9 612 L22 478 L34 192 WB 1800 L10 97 L23 562 L35 600 WW min 55 L11 88 L24 218 L36 149 WW max 100 L12 25 L25 213 L37 548 L13 643 L26 522 L1 514 L14 55 L27 480 D004579_A 063872 Note: Weight calculated with smallest P motors. Note: All dimensions in mm. Note: Standard rail gauges: 1700, 2000, 2400 and 2700. Note: H- and M- dimensions with min R. * Please, disregard the dimensions L8* and L16*. English 30/12/2011 93 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Two Hoist Trolley NE 06 + ND 04 Note.1: travelling machinery inside when R=>2400. English 30/12/2011 94 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 44 TWO HOIST TROLLEY NF 24 + NC 04 Main hoist NF 24 hoisting speed (m/min) E gear Load Class High Low kg Fem/ISO 4 0.6 25000 3m/M6 P6/T6 motor 32000 2m/M5 P6/T6 motor 40000 1Am/M4 P6/T6 motor F gear High Low 5 0.8 P6/T6 motor P6/T6 motor P7/T7 motor Main hoist NF 24 motor dimensions Motor P6 P7 M2 (mm) 536 576 Weight ( kg) 85 105 T6 536 65 Auxiliary hoist NC 04 hoisting speed (m/min) Load Class E gear + P3 motor kg Fem/ISO High Low 4000 3m/M6 4 0.7 5000 2m/M5 4 0.7 6300 1Am/M4 4 0.7 Auxiliary hoist NC 04 motor dimensions Motor P3 P4 M1 (mm) 449 542 Weight ( kg) 35 53 G gear High Low 6.3 1 P7/T7 motor P7/T7 motor T8 motor T7 536 71 H gear High Low 8 T8 motor T8 motor T9 motor T8 536 81 F gear + P3 motor High Low 5 0.8 5 0.8 - J gear High Low 10 T9 motor T9 motor - T9 536 92 H gear + P4 motor High Low 8 1.3 8 1.3 - Auxiliary hoist NC 04 cover plate dimensions L8 L15 L8* L15* 494 164 478 148 Hoist dimensions (main hoist NF 24 + auxiliary hoist NC 04) HOL1 HOL2 Drum NF 24 NC 04 Min R Max R H1 lengths m m mm mm mm G+D 10 12 2000 2400 787 H+E 13.5 15 2000 2700 937 H2 mm 99 129 M3 mm 489 364 M4 mm 772 772 Weight Min R kg 2800 2900 Weight Max R kg 2950 3250 Trolley dimensions C1 1440 L1 595 L14 84 L27 1013 C2 430 L2 595 L16 455 L28 342 D1(∅ ∅) 250 L3 600 L17 695 L29 256 D2(∅ ∅) 280 L4 82 L18 459 L30 221 WB 2000 L5 135 L19 950 L31 255 HTH 846 L6 492 L20 714 L32 98 WW min 55 L7 2528 L21 478 L33 600 WW max 100 L9 693 L22 1022 L34 121 L10 20 L23 218 L35 546 L11 150 L24 255 L12 18 L25 437 L13 720 L26 487 D004571_A 063877 Note: Weight calculated with smallest P motors. Note: All dimensions in mm. Note: H and M dimensions with min R. Note: Standard rail gauges: 2000, 2400 and 2700. * Please, disregard the dimensions L8* and L15*. English 30/12/2011 95 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Two Hoist Trolley NF 24 + NC 04 Note.1: Travelling machinery inside when R=>2400. English 30/12/2011 96 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 45 TWO HOIST TROLLEY NF 24 + ND 02 Main hoist NF 24 hoisting speed (m/min) E gear Load Class High Low kg Fem/ISO 4 0.6 25000 3m/M6 P6/T6 motor 32000 2m/M5 P6/T6 motor 40000 1Am/M4 P6/T6 motor F gear High Low 5 0.8 P6/T6 motor P6/T6 motor P7/T7 motor Main hoist NF 24 motor dimensions Motor P6 P7 M2 (mm) 536 576 Weight ( kg) 85 105 T6 536 65 Auxiliary hoist ND 02 hoisting speed (m/min) Load Class E gear + P5/T5 motor kg Fem/ISO High Low 4000 3m/M6 8 1.3 5000 2m/M5 8 1.3 6300 1Am/M4 8 1.3 Auxiliary hoist ND 02 motor dimensions Motor P5 P6 M1 (mm) 567 567 Weight ( kg) 58 85 G gear High Low 6.3 1 P7/T7 motor P7/T7 motor T8 motor T7 536 71 T8 536 81 F gear + P5/T5 motor High Low 10 1.7 10 1.7 - H gear High Low 8 T8 motor T8 motor T9 motor J gear High Low 10 T9 motor T9 motor - T9 536 92 H gear + P6/T6 motor High Low 16 2.7 16 2.7 - J gear + P7/T7 motor High Low 20 3.3 20 3.3 - Auxiliary hoist ND 02 cover plate dimensions L7 L14 L7* L14* 512.5 82.5 492.5 62.5 P7 607 105 Hoist dimensions (main hoist NF 24 + auxiliary hoist ND 02) HOL1 HOL2 Drum NF 24 ND 02 Min R Max R H1 lengths m m mm mm mm J+D 18.5 18 2400 2700 1058 H2 mm 176 M3 mm 389 Weight Min R kg 3300 M4 mm 908 Weight Max R kg 3600 Trolley dimensions C1 1440 L1 135 L15 455 L27 1013 C2 625.7 L2 600 L16 695 L28 355 D1(∅ ∅) 250 L3 82 L17 441 L29 256 D2(∅ ∅) 280 L4 595 L18 950 L30 216 WB 2000 L5 492 L19 696 L31 111 HTH 864 L6 2528 L20 478 L32 600 WW min 55 L8 693 L21 1622 L33 255 WW max 100 L9 20 L22 218 L34 149 L10 150 L23 255 L35 548 L11 18 L24 437 L12 720 L25 126 L13 84 L26 487 D004572_A 063878 Note: Weight calculated with smallest P motors. Note: All dimensions in mm. Note: H and M dimensions with min R. Note: Standard rail gauges: 2400 and 2700. * Please, disregard the dimensions L7* and L14*. English 30/12/2011 97 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Two Hoist Trolley NF 24 + ND 02 English 30/12/2011 98 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 46 TWO HOIST TROLLEY NF 24 + ND 04 Main hoist NF 24 hoisting speed (m/min) E gear Load Class High Low kg Fem/ISO 4 0.6 25000 3m/M6 P6/T6 motor 32000 2m/M5 P6/T6 motor 40000 1Am/M4 P6/T6 motor Main hoist NF 24 motor dimensions Motor P6 P7 M2 (mm) 536 576 Weight ( kg) 85 105 F gear High Low 5 0.8 P6/T6 motor P6/T6 motor P7/T7 motor T6 536 65 T7 536 71 Auxiliary hoist ND 04 hoisting speed (m/min) Load Class E gear + P5/T5 motor kg Fem/ISO High Low 6300 3m/M6 4 0.7 8000 3m/M6 4 0.7 10000 2m/M5 4 0.7 12500 1Am/M4 4 0.7 Auxiliary hoist ND 04 motor dimensions Motor P5 P6 P7 M1 (mm) 567 567 607 58 85 105 Weight ( kg) T5 487 45 G gear High Low 6.3 1 P7/T7 motor P7/T7 motor T8 motor T8 536 81 F gear + P5/T5 motor High Low 5 0.8 5 0.8 5 0.8 - T6 567 65 T7 607 71 Hoist dimensions (main hoist NF 24 + auxiliary hoist ND 04) HOL1 HOL2 Drum NF 24 ND 04 Min R Max R lengths m m mm mm G+E 10 12 2000 2400 H+F 13.5 16 2000 2700 J+G 18.5 20 2400 2700 H1 mm 940 903 1103 H gear High Low 8 T8 motor T8 motor T9 motor J gear High Low 10 T9 motor T9 motor - T9 536 92 H gear + P6/T6 motor High Low 8 1.3 8 1.3 8 1.3 - J gear + P7/T7 motor High Low 10 1.7 10 1.7 10 1.7 - Auxiliary hoist ND 04 cover plate dimensions L8 L15 L8* L15* 512.5 82.5 492.5 62.5 H2 mm 118 156 204 M3 mm 489 364 389 M4 mm 708 708 908 Weight Min R kg 3050 3150 3500 Weight Max R kg 3250 3550 3700 L12 18 L25 437 L13 720 L26 126 Trolley dimensions C1 1440 L1 595 L14 84 L27 487 C2 564 L2 595 L16 455 L28 1013 D1 (∅ ∅) 250 L3 600 L17 695 L29 355 D2 (∅ ∅) 280 L4 82 L18 472 L30 256 WB 2000 L5 135 L19 950 L31 216 HTH 833 L6 492 L20 727 L32 255 WW min 55 L7 2528 L21 478 L33 111 WW max 100 L9 693 L22 1022 L34 600 L10 20 L23 218 L35 149 L11 150 L24 255 L36 668 D004570_A 063876 Note: Weight calculated with smallest P motors. Note: All dimensions in mm. Note: H and M dimensions with min R. Note: Standard rail gauges: 2000, 2400 and 2700. * Please, disregard the dimensions L8* and L15*. English 30/12/2011 99 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Two Hoist Trolley NF 24 + ND 04 English 30/12/2011 100 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 47 TWO HOIST TROLLEY NF 24 + NE 04 Main hoist NF 24 hoisting speed (m/min) E gear Load Class High Low kg Fem/ISO 4 0.6 25000 3m/M6 P6/T6 motor 32000 2m/M5 P6/T6 motor 40000 1Am/M4 P6/T6 motor Main hoist NF 24 motor dimensions Motor P6 P7 M2 (mm) 536 576 Weight ( kg) 85 105 F gear High Low 5 0.8 P6/T6 motor P6/T6 motor P7/T7 motor T6 536 65 T7 536 71 T8 536 81 Auxiliary hoist NE 04 hoisting speed (m/min) E gear F gear Load Class High Low High Low kg Fem/ISO 4 0.7 5 0.8 12500 3m/M6 P6/T6 motor P6/T6 motor 16000 2m/M5 P6/T6 motor P6/T6 motor 20000 1Am/M4 P6/T6 motor P7/T7 motor Auxiliary hoist NE 04 motor dimensions Motor P6 P7 M1 (mm) 536 576 Weight ( kg) 85 105 P8 711 106 G gear High Low 6.3 1 P7/T7 motor P7/T7 motor T8 motor T7 536 71 J gear High Low 10 T9 motor T9 motor - T9 536 92 G gear High Low 6.3 1.1 P7/T7 motor P7/T7 motor P8/T8 motor T6 536 65 H gear High Low 8 T8 motor T8 motor T9 motor T8 536 81 H gear High Low 8 T8 motor T8 motor T9 motor T9 536 92 J gear High Low 10 T9 motor T9 motor TA motor TA 576 106 Hoist dimensions (main hoist NF 24 + auxiliary hoist NE 04) Drum lengths G+D H+E J+F HOL1 NF 24 m 10 13.5 18.5 HOL2 NE 04 m 10.5 14 18 Min R mm 2000 2400 2400 Max R mm 2400 2700 2700 D1 (∅ ∅) 250 L3 600 L15 246 L27 1013 D2 (∅ ∅) 280 L4 82 L16 455 L28 546 HTH 876 L5 135 L17 695 L29 378 H1 mm 938 938 114 1 H2 mm 94 125 161 M3 mm 489 564 389 M4 mm 934 1134 1134 Weight Min R kg 3700 3950 4100 Weight Max R kg 3850 4200 4350 Trolley dimensions C1 1440 L1 595 L13 720 L25 437 C2 922 L2 595 L14 20 L26 126 WB 2000 L6 492 L18 429 L30 256 WW min 55 L7 2774 L19 950 L31 255 WW max 100 L8 484 L20 684 L32 134 L9 693 L21 478 L33 218 L10 20 L22 1022 L34 562 L11 150 L23 218 L35 900 L12 18 L24 255 D004556_A 063874 Note: Weight calculated with smallest P motors. Note: All dimensions in mm. Note: H and M dimensions with min R. Note: Standard rail gauges: 2000, 2400 and 2700. English 30/12/2011 101 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Two Hoist Trolley NF 24 + NE 04 English 30/12/2011 102 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 48 TWO HOIST TROLLEY NF 26 + NC 04 Main hoist NF 26 hoisting speed (m/min) E gear Load Class High Low kg Fem/ISO 2.5 0.4 40000 3m/M6 P6/T6 motor 50000 2m/M5 P6/T6 motor 60000 1Am/M4 P6/T6 motor Main hoist NF 26 motor dimensions Motor P6 P7 M2 (mm) 536 576 Weight ( kg) 85 105 F gear High Low 3.2 0.5 P6/T6 motor P6/T6 motor P7/T7 motor T6 536 65 T7 536 71 Auxiliary hoist NC 04 hoisting speed (m/min) Load Class E gear + P3/T3 motor kg Fem/ISO High Low 4000 3m/M6 4 0.7 5000 2m/M5 4 0.7 6300 1Am/M4 4 0.7 Auxiliary hoist NC 04 motor dimensions Motor P3 P4 M3 (mm) 597 690 Weight ( kg) 35 53 T3 507 22 G gear High Low 4 0.6 P7/T7 motor P7/T7 motor T8 motor T8 536 81 H gear High Low 5 T8 motor T8 motor T9 motor J gear High Low 6.3 T9 motor T9 motor - T9 536 92 F gear + P3/T3 motor High Low 5 0.8 5 0.8 - H gear + P4/T4 motor High Low 8 1.3 8 1.3 - Auxiliary hoist NC 04 cover plate dimensions L7 L14 L7* L14* 500 210 484 194 T4 610 45 Hoist dimensions (main hoist NF 26 + auxiliary hoist NC 04) HOL1 HOL2 Drum NF 26 NC 04 Min R Max R H1 lengths m m mm mm mm H+C 9 9 2400 2700 1137 J+D 12 12 2400 2700 1137 K+E 15 15 2700 1287 H2 mm 74 99 129 M3 mm 564 739 739 M4 mm 972 972 1122 Weight Min R kg 3500 3650 3950 Weight Max R kg 3750 3850 3950 Trolley dimensions C1 1516 L1 173 L15 455 L27 1013 C2 430 L2 600 L16 656 L28 342 D1 (∅ ∅) 250 L3 81.9 L17 504 L29 256 D2 (∅ ∅) 280 L4 595 L18 911 L30 221 HTH 840 L5 512 L19 759 L31 53 WB 2000 L6 2573 L20 477 L32 600 WW min 55 L8 689 L21 1272 L33 255 WW max 100 L9 20 L22 218 L34 121 L10 150 L23 255 L35 446 L11 63 L24 392 L12 740 L25 176 L13 84 L26 442 D004574_A 063879 Note: Weight calculated with smallest P motors. Note: All dimensions in mm. Note: H and M dimensions with min R. Note: Standard rail gauges: 2400 and 2700. * Please, disregard the dimensions L7* and L14*. English 30/12/2011 103 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Two Hoist Trolley NF 26 + NC 04 English 30/12/2011 104 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 49 TWO HOIST TROLLEY NF 26 + ND 04 Main hoist NF 26 hoisting speed (m/min) E gear Load Class High Low kg Fem/ISO 2.5 0.4 40000 3m/M6 P6/T6 motor 50000 2m/M5 P6/T6 motor 60000 1Am/M4 P6/T6 motor Main hoist NF 26 motor dimensions Motor P6 P7 M2 (mm) 536 576 Weight ( kg) 85 105 F gear High Low 3.2 0.5 P6/T6 motor P6/T6 motor P7/T7 motor T6 536 65 Auxiliary hoist ND 04 hoisting speed (m/min) Load Class E gear + P5 motor kg Fem/ISO High Low 6300 3m/M6 4 0.7 8000 3m/M6 4 0.7 10000 2m/M5 4 0.7 12500 1Am/M4 4 0.7 Auxiliary hoist ND 04 motor dimensions Motor P5 P6 M1 (mm) 567 567 Weight ( kg) 58 85 G gear High Low 4 0.6 P7/T7 motor P7/T7 motor T8 motor T7 536 71 T8 536 81 H gear High Low 5 T8 motor T8 motor T9 motor J gear High Low 6.3 T9 motor T9 motor - T9 536 92 F gear + P5 motor High Low 5 0.8 5 0.8 5 0.8 - H gear + P6 motor High Low 8 1.3 8 1.3 8 1.3 - J gear + P7 motor High Low 10 1.7 10 1.7 10 1.7 - Auxiliary hoist ND 04 cover plate dimensions L7 L13 L7* L13* 517.5 127.5 497.5 107.5 P7 607 105 Hoist dimensions (main hoist NF 26 + auxiliary hoist ND 04) HOL1 HOL2 Drum NF 26 ND 04 Min R Max R lengths m m mm mm H+D 9 9 2400 2700 J+E 12 12 2400 2700 K+F 15 16 2700 2700 H1 mm 1140 1140 1253 H2 mm 88 118 156 M3 mm 564 739 739 M4 mm 908 908 1058 Weight Min R kg 3850 3950 4250 Weight Max R kg 4050 4150 4250 Trolley dimensions C1 1516 L1 173 L15 455 L27 1013 C2 564 L2 600 L16 656 L28 355 D1 (∅ ∅) 250 L3 82 L17 517 L29 256 D2 (∅ ∅) 280 L4 595 L18 911 L30 216 HTH 827 L5 512 L19 772 L31 66 WB 2000 L6 2573 L20 477 L32 600 WW min 55 L8 689 L21 1272 L33 548 WW max 100 L9 20 L22 218 L34 149 L10 150 L23 255 L35 255 L11 63 L24 392 L12 740 L25 126 L14 84 L26 442 D004573_A 064086 Note: Weight calculated with smallest P motors. Note: All dimensions in mm. Note: H and M dimensions with min R. Note: Standard rail gauges: 2400 and 2700. * Please, disregard the dimensions L7* and L13*. English 30/12/2011 105 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Two Hoist Trolley NF 26 + ND 04 English 30/12/2011 106 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 50 TWO HOIST TROLLEY NF 26 + NE 04 Main hoist NF 26 hoisting speed (m/min) E gear Load Class High Low kg Fem/ISO 2.5 0.4 40000 3m/M6 P6/T6 motor 50000 2m/M5 P6/T6 motor 60000 1Am/M4 P6/T6 motor F gear High Low 3.2 0.5 P6/T6 motor P6/T6 motor P7/T7 motor Main hoist NF 26 motor dimensions Motor P6 P7 M2 (mm) 536 576 Weight ( kg) 85 105 T6 536 65 T7 536 71 T8 536 81 Auxiliary hoist NE 04 hoisting speed (m/min) E gear F gear Load Class High Low High Low kg Fem/ISO 4 0.7 5 0.8 12500 3m/M6 P6/T6 motor P6/T6 motor 16000 2m/M5 P6/T6 motor P6/T6 motor 20000 1Am/M4 P6/T6 motor P7/T7 motor Auxiliary hoist NE 04 motor dimensions Motor P6 P7 M1 (mm) 536 576 Weight ( kg) 85 105 P8 711 106 G gear High Low 4 0.6 P7/T7 motor P7/T7 motor T8 motor T6 536 65 J gear High Low 6.3 T9 motor T9 motor - T9 536 92 G gear High Low 6.3 1.1 P7/T7 motor P7/T7 motor P8/T8 motor T7 536 71 H gear High Low 5 T8 motor T8 motor T9 motor T8 536 81 H gear High Low 8 T8 motor T8 motor T9 motor T9 536 92 J gear High Low 10 T9 motor T9 motor TA motor TA 576 106 Hoist dimensions (main hoist NF 26 + auxiliary hoist NE 04) Drum lengths H+D J+E K+F HOL1 NF 26 m 9 12 15 HOL2 NE 04 m 10.5 14 18 Min R mm 2400 2400 2700 Max R mm 2400 2700 2700 H1 mm 1138 1138 1291 H2 mm 94 125 161 M3 mm 564 389 389 M4 mm 1144 1144 1344 Weight Min R kg 4450 4550 4950 Weight Max R kg 4450 4800 4950 Trolley dimensions C1 1516 L1 173 L13 20 L25 126 C2 922 L2 595 L14 201 L26 442 D1 (∅ ∅) 250 L3 600 L15 455 L27 1013 D2 (∅ ∅) 280 L4 82 L16 656 L28 378 HTH 870 L5 512 L17 474 L29 256 WB 2000 L6 2774 L18 911 L30 501 WW min 55 L7 489 L19 729 L31 255 WW max 100 L8 689 L20 477 L32 900 L9 20 L21 1272 L33 89 L10 150 L22 218 L34 218 L11 63 L23 255 L35 562 L12 720 L24 392 D004564_A 063875 Note: Weight calculated with smallest P motors. Note: All dimensions in mm. Note: H and M dimensions with min R. Note: Standard rail gauges: 2400 and 2700. English 30/12/2011 107 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Two Hoist Trolley NF 26 + NE 04 English 30/12/2011 108 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS DOUBLE GIRDER TROLLEY, HIGH English 30/12/2011 109 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS English 30/12/2011 110 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 51 HIGH DOUBLE GIRDER HOIST NB, REEVING: 02 Hoisting speed (m/min) Load Class kg Fem/ISO 800 3m/M6 1000 2m/M5 1250 3m/M6 1600 2m/M5 F gear + P1/T1 motor High Low 10 1.7 10 1.7 - Hoist dimensions HOL Length m code 12 19 A C Motor dimensions Motor P1 M2 (mm) 498 Weight (kg) 21 Trolley dimensions C D1(∅ ∅) 185 L1 83 L14 138 90 L2 324 L15 104 G gear + P2/T2 motor High Low 12.5 2.1 12.5 2.1 12.5 2.1 12.5 2.1 H gear + P3/T3 motor High Low 16 2.7 16 2.7 16 2.7 16 2.7 M1 mm H2 mm Min R mm L6 mm L6* mm Weight kg 431 561 90 144 900 900 87 87 72 72 210 220 P2 558 31 D2(∅ ∅) 120 L3 250 L16 600 F gear + P2/T2 motor High Low 10 1.7 10 1.7 10 1.7 10 1.7 P3 588 35 D3(∅ ∅) 63 L4 15 L17 212 T1 498 22 T2 498 22 T3 498 22 H1 WB W min W max 369 L5 1096 L18 138 820 L7 400 50 L8 90 70 L9 397 L10 423 L11 536 L12 561 L13 169 D002074_A 062128 Note: All dimensions in mm. Note: Weight calculated with P1 motor. Note: Min R with second brake. Note: Standard rail gauges: 900, 1200, 1400, 1700 and 2000. * Please, disregard the dimension L6*. English 30/12/2011 111 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS High Double Girder Hoist NB, REEVING: 02 English 30/12/2011 112 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 52 HIGH DOUBLE GIRDER HOIST NB, REEVING: 04 Hoisting speed (m/min) Load Class kg Fem/ISO 1600 3m/M6 2000 2m/M5 2500 3m/M6 3200 2m/M5 F gear + P1/T1 motor High Low 5 0.8 5 0.8 - Hoist dimensions HOL Length m code 6 A 9.5 C Motor dimensions Motor P1 M2 (mm) 498 Weight (kg) 21 Trolley dimensions C D1(∅ ∅) 135 L1 83 L14 138 90 L2 324 L15 104 M1 mm 431 561 P2 558 31 D2(∅ ∅) 120 L3 250 L16 600 H2 mm 45 72 P3 588 35 D3(∅ ∅) 63 L4 15 L17 212 F gear + P2/T2 motor High Low 5 0.8 5 0.8 5 0.8 5 0.8 Min R mm 900 900 T1 498 22 G gear + P2/T2 motor High Low 6.3 1.1 6.3 1.1 6.3 1.1 6.3 1.1 L6 mm 87 87 T2 498 22 L6* mm 72 72 H gear + P3/T3 motor High Low 8 1.3 8 1.3 8 1.3 8 1.3 Weight kg 210 220 T3 498 22 H1 WB W min W max 424 L5 1096 L18 138 820 L7 90 50 L8 400 70 L9 411 L10 410 L11 549 L12 548 L13 169 D002079_A 028596 Note: All dimensions in mm. Note: Weight calculated with P1 motor. Note: Min R with second brake. Note: Standard rail gauges: 900, 1200, 1400, 1700 and 2000. * Please, disregard the dimension L6*. English 30/12/2011 113 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS High Double Girder Hoist NB, REEVING: 04 English 30/12/2011 114 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 53 HIGH DOUBLE GIRDER HOIST NC, REEVING: 02 Hoisting speed (m/min) Load Class kg Fem/ISO 2000 3m/M6 2500 2m/M5 3200 1Am/M4 E gear + P3/T3 motor High Low 8 1.3 8 1.3 8 1.3 Hoist dimensions HOL Length m code 12 B 18 C 24 D 30 E M1 mm 467 567 667 787 M2 mm 130 130 102 252 Motor dimensions Motor P3 M3 (mm) 597 Weight (kg) 35 P4 690 53 T3 507 22 Trolley dimensions C D1 (∅ ∅) 90 L1 83 L13 138 90 L2 324 L14 158 D2 (∅ ∅) 120 L3 250 L15 600 D3 (∅ ∅) 63 L4 12 L16 212 F gear + P3/T3 motor High Low 10 1.7 10 1.7 - H1 mm 337 337 309 459 H2 mm 95 144 193 252 Min R mm 900 900 900 1200 H gear + P4/T4 motor High Low 16 2.7 16 2.7 - L18 mm 95 95 95 95 L18* mm 79 79 79 79 Weight kg 321 331 346 367 T4 610 45 WB W min W max 1010 L5 1286 L17 138 50 L6 427 70 L7 571 L8 90 L9 483 L10 527 L11 621 L12 665 D002229_A 062229 Note: Weight calculated with P3 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 900, 1200, 1400, 1700 and 2000. * Please, disregard the dimension L18*. English 30/12/2011 115 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS High Double Girder Hoist NC, REEVING: 02 English 30/12/2011 116 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 54 HIGH DOUBLE GIRDER HOIST NC, REEVING: 04 Hoisting speed (m/min) Load Class kg Fem/ISO 4000 3m/m6 5000 2m/M4 6300 1Am/M4 E gear + P3/T3 motor High Low 4 0.7 4 0.7 4 0.7 Hoist dimensions HOL Length m code 6 B 9 C 12 D 15 E M1 mm 467 567 667 787 M2 mm 130 130 102 252 Motor dimensions Motor P3 M3 (mm) 597 Weight (kg) 35 P4 690 53 T3 507 22 Trolley dimensions C1 C2 80 L1 83 L13 138 97 L2 324 L14 158 D1 (∅ ∅) 90 L3 250 L15 600 D2 (∅ ∅) 120 L4 12 L16 212 D3 (∅ ∅) 63 L5 1286 L17 138 F gear + P3/T3 motor High Low 5 0.8 5 0.8 - H1 mm 415 415 387 537 H2 mm 49 74 99 129 Min R mm 900 900 900 1200 H gear + P4/T4 motor High Low 8 1.3 8 1.3 - L18 mm 95 95 95 95 L18* mm 79 79 79 79 Weight kg 325 335 355 375 T4 610 45 WB W min W max 1010 L6 427 50 L7 571 70 L8 90 L9 505 L10 505 L11 643 L12 643 D002230_A 062231 Note: Weight calculated with P3 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 900, 1200, 1400, 1700 and 2000. * Please, disregard the dimension L18*. English 30/12/2011 117 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS High Double Girder Hoist NC, REEVING: 04 English 30/12/2011 118 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 55 HIGH DOUBLE GIRDER HOIST ND, REEVING: 02 Hoisting speed (m/min) Load Class kg Fem/ISO 4000 3m/M6 5000 2m/M5 6300 1Am/M4 E gear + P5/T5 motor High Low 8 1.3 8 1.3 8 1.3 Hoist dimensions HOL Length m code 18 D 24 E 32 F 40 G M1 mm 697 817 967 1157 Motor dimensions Motor P5 M3 (mm) 722 Weight (kg) 58 P6 722 85 M2 mm 159 159 122 372 P7 762 105 F gear + P5/T5 motor High Low 10 1.7 10 1.7 - H1 mm 458 458 421 671 T5 642 45 H gear + P6/T6 motor High Low 16 2.7 16 2.7 - H2 mm 176 235 309 403 L18 mm 40 40 40 40 T6 722 65 T7 722 71 W max 87 L7 685 L8 100 L18* mm 20 20 20 20 J gear + P7/T7 motor High Low 20 3.3 20 3.3 - Min R mm 1200 1200 1200 1700 Weight kg 665 690 715 795 Trolley dimensions C 211 L1 430 L13 148 D1 (∅ ∅) 110 L2 382 L14 128 D2 (∅ ∅) 140 L3 400 L15 900 D3 (∅ ∅) 63 L4 15 L16 255 WB 1080 L5 98 L17 148 W min 52 L6 1376 L9 507 L10 573 L11 655 L12 721 D002238_A 062235 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1200, 1400, 1700 and 2000. * Please, disregard the dimension L18*. English 30/12/2011 119 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS High Double Girder Hoist ND, REEVING: 02 English 30/12/2011 120 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 56 HIGH DOUBLE GIRDER HOIST ND, REEVING: 04 Hoisting speed (m/min) Load Class kg Fem/ISO 5000 3m/M6 6300 3m/M6 8000 3m/M6 10000 2m/M5 12500 1Am/M4 E gear + P5/T5 motor High Low 4 0.7 4 0.7 4 0.7 4 0.7 4 0.7 Hoist dimensions HOL Length m code 9 D 12 E 16 F 20 G M1 mm 697 817 967 1157 Motor dimensions Motor P5 M3 (mm) 722 Weight (kg) 58 P6 722 85 M2 mm 159 159 122 372 P7 762 105 F gear + P5/T5 motor High Low 5 0.8 5 0.8 5 0.8 5 0.8 - H1 mm 540 540 503 753 T5 642 45 H gear + P6/T6 motor High Low 8 1.3 8 1.3 8 1.3 8 1.3 - H2 mm 88 118 156 204 T6 722 65 L18 mm 40 40 40 40 J gear + P7/T7 motor High Low 10 1.7 10 1.7 10 1.7 10 1.7 - L18* mm 20 20 20 20 Min R mm 1200 1200 1200 1700 Weight kg 685 710 735 815 T7 722 71 Trolley dimensions C1 155 L1 470 L13 148 C2 210 L2 382 L14 128 D1 (∅ ∅) 110 L3 400 L15 900 D2 (∅ ∅) 140 L4 15 L16 255 D3 (∅ ∅) 63 L5 98 L17 148 WB 1080 L6 1376 W min 52 L7 685 W max 87 L8 100 L9 540 L10 540 L11 688 L12 688 D002240_A 062246 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1200, 1400, 1700 and 2000. * Please, disregard the dimension L18*. English 30/12/2011 121 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS High Double Girder Hoist ND, REEVING: 04 English 30/12/2011 122 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 57 HIGH DOUBLE GIRDER HOIST ND, REEVING: 06 Hoisting speed (m/min) Load Class kg Fem/ISO 12000 3m/M6 15000 2m/M5 F gear + P5/T5 motor High Low 3.2 0.5 3.2 0.5 Hoist dimensions HOL Length m code 6 D 8 E 10 F 13 G M1 mm 558 678 828 1018 Motor dimensions Motor P5 MOT (mm) 722 Weight ( kg) 58 P6 722 85 M2 mm 548 648 803 933 P7 762 105 H gear + P6/T6 motor High Low 5 0.8 5 0.8 H1 mm 515 615 770 900 T5 642 45 H2 mm 53 78 98 132 T6 722 65 Min R mm 1200 1400 1700 2000 J gear + P7/T7 motor High Low 6.3 1.1 6.3 1.1 Weight kg 765 800 850 905 T7 722 71 Trolley dimensions C 525 RO 98 ∅ BU 63 TD 20 BU 163 TH 695 BUH 100 E1 382 E2 1343 E3 18 GEA 143 WB 1080 ∅ WD 140 W min 54 W max 84 D007196_A 124517 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1200, 1400, 1700, 2000 and 2400. Note: M2 and weight calculated with Min R. English 30/12/2011 123 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS High Double Girder Hoist ND, REEVING: 06 English 30/12/2011 124 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 58 HIGH DOUBLE GIRDER HOIST ND, REEVING: 08 Hoisting speed (m/min) Load Class kg Fem/ISO 16000 2m/M5 20000 1Am/M4 F gear + P5/T5 motor High Low 2.5 0.4 2.5 0.4 Hoist dimensions HOL Length m code 4.5 D 6 E 8 F 10 G M1 mm 558 678 828 1018 Motor dimensions Motor P5 MOT (mm) 722 Weight ( kg) 58 P6 722 85 M2 mm 548 648 803 933 P7 762 105 H gear + P6/T6 motor High Low 4 0.7 4 0.7 H1 mm 515 615 770 900 T5 642 45 H2 mm 44 53 76 98 T6 722 65 Min R mm 1200 1400 1700 2000 J gear + P7/T7 motor High Low 5 0.8 5 0.8 Weight kg 780 815 865 915 T7 722 71 Trolley dimensions C 525 RO 98 ∅ BU 63 TD 20 BU 163 TH 695 BUH 100 E1 382 E2 1343 E3 18 GEA 143 WB 1080 ∅ WD 140 W min 54 W max 84 D007197_A 124518 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1200, 1400, 1700, 2000 and 2400. Note: M2 and weight calculated with Min R. English 30/12/2011 125 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS High Double Girder Hoist ND, REEVING: 08 English 30/12/2011 126 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 59 HIGH DOUBLE GIRDER HOIST ND, REEVING: 22 Hoisting speed (m/min) Load Class kg Fem/ISO 4000 3m/M6 5000 2m/M5 Hoist dimensions HOL Length m code 8.5 D 13 E 18 F 25 G 33.5 H 46 J Motor dimensions Motor MOT (mm) Weight ( kg) P5 578 58 F gear + P5/T5 motor High Low 10 1.7 10 1.7 M1 mm 558 678 828 1018 1268 1618 P6 578 85 M2 mm 321 261 286 341 216 424 P7 618 105 H gear + P6/T6 motor High Low 16 2.7 16 2.7 BRA mm 128 128 T5 498 45 Min R mm 1200 1200 1400 1700 1700 2400 T6 578 65 J gear + P7/T7 motor High Low 20 3.3 20 3.3 Weight kg 675 695 735 785 840 950 T7 578 71 Trolley dimensions C 355 RO 98 ∅ BU 63 TD 20 BU 148 TH 692 BUH 100 E1 382 E2 1328 E3 15 GEA 143 WB 1080 ∅ WD 110 W min 52 W max 87 D007182_A 124426 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1200, 1400, 1700, 2000 and 2400. Note: Gear brake as standard brake for drum lengths H and J. Note: M2 and weight calculated with Min R. English 30/12/2011 127 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS High Double Girder Hoist ND, REEVING: 22 English 30/12/2011 128 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 60 HIGH DOUBLE GIRDER HOIST ND, REEVING: 24 Hoisting speed (m/min) Load Class kg Fem/ISO 8000 3m/M6 10000 2m/M5 Hoist dimensions HOL Length m code 4 D 6.5 E 9 F 12.5 G 16.5 H 23 J Motor dimensions Motor MOT (mm) Weight (kg) P5 578 58 F gear + P5/T5 motor High Low 5 0.8 5 0.8 M1 mm 558 678 828 1018 1268 1618 P6 578 85 M2 mm 321 261 286 341 216 424 P7 618 105 H gear + P6/T6 motor High Low 8 1.3 8 1.3 BRA mm 128 128 T5 498 45 Min R mm 1200 1200 1400 1700 1700 2400 T6 578 65 J gear + P7/T7 motor High Low 10 1.7 10 1.7 Weight kg 740 760 800 850 905 1015 T7 578 71 Trolley dimensions C 520 RO 98 ∅ BU 63 TD 20 BU 148 TH 692 BUH 100 E1 382 E2 1328 E3 15 GEA 143 WB 1080 ∅ WD 110 W min 52 W max 87 D007183_A 124427 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1200, 1400, 1700, 2000 and 2400. Note: Gear brake as standard brake for drum lengths H and J. Note: M2 and weight calculated with Min R. English 30/12/2011 129 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS High Double Girder Hoist ND, REEVING: 24 English 30/12/2011 130 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 61 HIGH DOUBLE GIRDER HOIST ND, REEVING: 26 Hoisting speed (m/min) Load Class kg Fem/ISO 12000 3m/M6 15000 2m/M5 Hoist dimensions HOL Length m code 4 E 6 F 8 G 11 H 15 J Motor dimensions Motor MOT (mm) Weight (kg) P5 578 58 F gear + P5/T5 motor High Low 3.2 0.5 3.2 0.5 M1 mm 678 828 1018 1268 1618 P6 578 85 M2 mm 261 286 341 216 424 P7 618 105 H gear + P6/T6 motor High Low 5 0.8 5 0.8 BRA mm 128 128 T5 498 45 Min R mm 1200 1400 1700 1700 2400 T6 578 65 J gear + P7/T7 motor High Low 6.3 1.1 6.3 1.1 Weight kg 790 830 885 935 1050 T7 578 71 Trolley dimensions C 520 RO 98 ∅ BU 63 TD 20 BU 163 TH 695 BUH 100 E1 382 E2 1343 E3 18 GEA 143 WB 1080 ∅ WD 140 W min 54 W max 84 D007184_A 124428 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1200, 1400, 1700, 2000 and 2400. Note: Gear brake as standard brake for drum lengths H and J. Note: M2 and weight calculated with Min R. English 30/12/2011 131 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS High Double Girder Hoist ND, REEVING: 26 English 30/12/2011 132 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 62 HIGH DOUBLE GIRDER HOIST ND, REEVING: 28 Hoisting speed (m/min) Load Class kg Fem/ISO 16000 2m/M5 20000 1Am/M4 Hoist dimensions HOL Length m code 4.5 F 6 G 8 H 11.5 J Motor dimensions Motor MOT (mm) Weight (kg) P5 578 58 F gear + P5/T5 motor High Low 2.5 0.4 2.5 0.4 M1 mm 828 1018 1268 1618 P6 578 85 M2 mm 286 341 216 424 P7 618 105 H gear + P6/T6 motor High Low 4 0.7 4 0.7 BRA mm 128 128 T5 498 45 Min R mm 1400 1700 1700 2400 T6 578 65 J gear + P7/T7 motor High Low 5 0.8 5 0.8 Weight kg 840 895 945 1060 T7 578 71 Trolley dimensions C 520 RO 98 ∅ BU 63 TD 20 BU 163 TH 695 BUH 100 E1 382 E2 1343 E3 18 GEA 143 WB 1080 ∅ WD 140 W min 54 W max 84 D007185_A 124429 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1400, 1700, 2000 and 2400. Note: Gear brake as standard brake for drum lengths H and J. Note: M2 and weight calculated with Min R. English 30/12/2011 133 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS High Double Girder Hoist ND, REEVING: 28 English 30/12/2011 134 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS DOUBLE GIRDER TROLLEY, LOW English 30/12/2011 135 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS English 30/12/2011 136 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 63 LOW DOUBLE GIRDER HOIST ND, REEVING: 02 Hoisting speed (m/min) Load Class kg Fem/ISO 4000 3m/M6 5000 2m/M5 6300 1Am/M4 Hoist dimensions HOL Length m code 18 D 24 E 32 F 40 G Motor dimensions Motor M3 (mm) Weight (kg) Trolley dimensions C D1 615 110 L1 L2 430 342 L13 L14 721 148 E gear + P5/T5 motor High Low 8 1.3 8 1.3 8 1.3 M1 mm 697 817 967 1157 P5 722 58 D2 140 L3 250 L15 128 M2 mm 259 259 372 522 P6 722 85 D3 63 L4 5 L16 900 F gear + P5/T5 motor High Low 10 1.7 10 1.7 - H1 mm 558 558 671 821 P7 762 105 WB 1080 L5 98 L17 148 H2 mm 176 235 309 403 T5 642 45 W min 52 L6 320 L18 212 H gear + P6/T6 motor High Low 16 2.7 16 2.7 - L19 mm 30 30 30 30 T6 722 65 W max 87 L7 1376 L8 245 L19* mm 10 10 10 10 J gear + P7/T7 motor High Low 20 3.3 20 3.3 - Min R mm 1400 1400 1700 2000 Weight kg 650 675 720 760 T7 722 71 L9 100 L10 507 L11 573 L12 655 D002115_A 005058 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1400, 1700 and 2000. * Please, disregard the dimension L19*. English 30/12/2011 137 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Low Double Girder Hoist ND, REEVING: 02 English 30/12/2011 138 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 64 LOW DOUBLE GIRDER HOIST ND, REEVING: 04 Hoisting speed (m/min) Load Class kg Fem/ISO 5000 3m/M6 6300 3m/M6 8000 3m/M6 10000 2m/M5 12500 1Am/M4 E gear + P5/T5 motor High Low 4 0.7 4 0.7 4 0.7 4 0.7 4 0.7 Hoist dimensions HOL Length m code 9 D 12 E 16 F 20 G M1 mm 697 817 967 1157 Motor dimensions Motor P5 M3 (mm) 722 Weight (kg) 58 P6 722 85 M2 mm 259 259 372 522 P7 762 105 F gear + P5/T5 motor High Low 5 0.8 5 0.8 5 0.8 5 0.8 - H1 mm 640 640 753 903 T5 642 45 H gear + P6/T6 motor High Low 8 1.3 8 1.3 8 1.3 8 1.3 - H2 mm 88 118 156 204 T6 722 65 L19 mm 30 30 30 30 L19* mm 10 10 10 10 J gear + P7/T7 motor High Low 10 1.7 10 1.7 10 1.7 10 1.7 - Min R mm 1400 1400 1700 2000 Weight kg 670 700 745 785 T7 722 71 Trolley dimensions C1 595 L1 470 L13 688 C2 651 L2 342 L14 148 D1 (∅ ∅) 110 L3 250 L15 128 D2 (∅ ∅) 140 L4 5 L16 900 D3 (∅ ∅) 63 L5 98 L17 148 WB 1080 L6 320 L18 212 W min 52 L7 1376 W max 87 L8 245 L9 100 L10 540 L11 540 L12 688 D002122_A 005060 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1400, 1700 and 2000. * Please, disregard the dimension L19*. English 30/12/2011 139 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Low Double Girder Hoist ND, REEVING: 04 English 30/12/2011 140 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS NORMAL HEADROOM TROLLEY English 30/12/2011 141 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS English 30/12/2011 142 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 65 NORMAL HEADROOM HOIST NB, REEVING: 02 Hoisting speed (m/min) Load Class kg Fem/ISO 800 3m/M6 1000 2m/M5 1250 3m/M6 1600 2m/M5 F gear + P1/T1 motor High Low 10 1.7 10 1.7 - Hoist dimensions HOL Length m code 12 A 19 C M1 mm 431 561 Motor dimensions Motor P1 M2 (mm) 498 Weight ( kg) 21 Trolley dimensions B min. B max. 100 E1 311 L5 150 450 E2 305 L6 2 P2 558 31 C 740 E3 531 L7 253 D1(∅ ∅) 100 E4 380 L8 531 F gear + P2/T2 motor High Low 10 1.7 10 1.7 10 1.7 10 1.7 H2 mm 90 144 P3 588 35 D3(∅ ∅) 63 E5 236 L9 45 H5 mm 447 447 T1 498 22 T2 498 22 E6 179 L10 40 E7 116 L11 179 G gear + P2/T2 motor High Low 12.5 2.1 12.5 2.1 12.5 2.1 12.5 2.1 H5* mm 462 462 H gear + P3/T3 motor High Low 16 2.7 16 2.7 16 2.7 16 2.7 Weight kg 250 270 T3 498 22 E11 277 L12 26 H1 70 M3 155 H6 633 M4 400 L2 33 M6 115 L4 377 Trolley dimensions Length L15 code A 185 C 315 D002077_A 062129 Minimum track radius B Min R 100 - 109 2500 110 - 119 2000 120 - 450 1500 Note: All dimensions in mm. Note: Weight calculated with P1 motor. Note: Additional travelling machinery for curved track (option) indicated with an ‘X’ in the drawing. * Please, disregard the dimension H5*. English 30/12/2011 143 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist NB, REEVING: 02 English 30/12/2011 144 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 66 NORMAL HEADROOM HOIST NB, REEVING: 04 Hoisting speed (m/min) Load Class kg Fem/ISO 1600 3m/M6 2000 2m/M5 2500 3m/M6 3200 2m/M5 F gear + P1/T1 motor High Low 5 0.8 5 0.8 - Hoist dimensions HOL Length m code 6 A 9.5 C M1 mm 431 561 Motor dimensions Motor P1 M2 (mm) 498 Weight ( kg) 21 Trolley dimensions B min. B max. 80 E1 311 L5 150 450 E2 305 L6 2 P2 558 31 C 690 E3 531 L7 253 D1(∅ ∅) 63 E4 380 L8 531 F gear + P2/T2 motor High Low 5 0.8 5 0.8 5 0.8 5 0.8 H2 mm 45 72 P3 588 35 D2(∅ ∅) 100 E5 236 L9 45 H5 mm 465 465 T1 498 22 H5* mm 480 480 T2 498 22 E6 179 L10 40 G gear + P2/T2 motor High Low 6.3 1.1 6.3 1.1 6.3 1.1 6.3 1.1 E7 116 L11 179 H gear + P3/T3 motor High Low 8 1.3 8 1.3 8 1.3 8 1.3 Weight kg 260 300 T3 498 22 E11 277 L12 26 H1 15 M3 155 H6 616 M4 400 L2 33 M6 115 L4 377 Trolley dimensions Length L15 code A 185 C 315 D002082_A 062130 Minimum track radius B 100 - 109 110 - 119 120 - 450 Min R 2500 2000 1500 Note: All dimensions in mm. Note: Weight calculated with P1, When B=300 mm. Note: Additional travelling machinery for curved track (option) indicated with an ‘X’ in the drawing. * Please, disregard the dimension H5*. English 30/12/2011 145 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist NB, REEVING: 04 English 30/12/2011 146 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 67 NORMAL HEADROOM HOIST NC, REEVING: 02 Hoisting speed (m/min) Load Class kg Fem/ISO 2000 3m/M6 2500 2m/M5 3200 1Am/M4 Hoist dimensions HOL Length m code 12 B 18 C 24 D 30 E Motor dimensions Motor M2 (mm) Weight ( kg) Trolley dimensions B min B max 120 E2 305 L5 150 450 E3 527 L6 2 Trolley dimensions Length E1 code B/C 362 D 362 E 184 E gear + P3/T3 motor High Low 8 1.3 8 1.3 8 1.3 M1 mm 467 567 667 787 P3 597 35 M3 mm 211 211 211 62 P4 690 53 H1 mm 129 129 129 21 T3 507 22 H2 mm 98 147 198 258 H gear + P4/T4 motor High Low 16 2.7 16 2.7 - H5 mm 532 532 532 532 H5* mm 548 548 548 548 Weight kg 350 390 420 480 T4 610 45 835 E4 380 L8 581 D1 (∅ ∅) 100 E5 236 L9 40 D3 (∅ ∅) 63 E6 175 L10 40 E7 266 L13 420 E11 L7 L11 L15 376 376 554 373 373 253 249 249 96 269 373 218 C F gear + P3/T3 motor High Low 10 1.7 10 1.7 - E8 47.5 M4 400 E9 31 M6 121 E12 34 W1 80.6 H6 665 W2 220 L2 33 L4 427 D002090_A 062140 Note: All dimensions in mm. Note: Weight calculated with P3, when B=300 mm. Note: Dimensions E8, E9 and E12 with RST cubicles. * Please, disregard the dimension H5*. English 30/12/2011 147 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist NC, REEVING: 02 English 30/12/2011 148 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 68 NORMAL HEADROOM HOIST NC, REEVING: 02, CURVED TRACK Hoisting speed (m/min) Load Class kg Fem/ISO 2000 3m/M6 2500 2m/M5 3200 1Am/M4 Hoist dimensions HOL Length m code 12 B 18 C 24 D 30 E Motor dimensions Motor M2 (mm) Weight ( kg) Trolley dimensions B min B max 90 E1 179 H6 668 M3 11 350 E2 305 L2 33 M4 400 E gear + P3/T3 motor High Low 8 1.3 8 1.3 8 1.3 M1 mm 467 567 667 787 P3 597 35 C 995 E3 688 L4 427 M6 121 H2 mm 98 147 198 258 P4 690 53 D1 (∅ ∅) 100 E4 380 L5 150 W1 80.6 F gear + P3/T3 motor High Low 10 1.7 10 1.7 - H5 mm 532 532 532 532 T3 507 22 D3 (∅ ∅) 63 E5 236 L6 2 H5* mm 548 548 548 548 H gear + P4/T4 motor High Low 16 2.7 16 2.7 - Weight kg 470 490 530 540 T4 610 45 E6 335 L7 253 E7 266 L8 741 E8 47.5 L9 42 E9 31 L10 40 E11 36 L11 66 E12 34 L13 523 H1 97 L15 191 D003840_A 062168 Track radius B 90 110 120 - 109 119 350 R min 2500 2000 1500 Note: All dimensions in mm. Note: Weight calculated with P3 motor. Note: Dimensions E8, E9 and E12 with RST cubicles. * Please, disregard the dimension H5*. English 30/12/2011 149 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist NC, REEVING: 02, Curved Track English 30/12/2011 150 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 69 NORMAL HEADROOM HOIST NC, REEVING: 04 Hoisting speed (m/min) Load Class kg Fem/ISO 4000 3m/M6 5000 2m/M5 Hoist dimensions HOL Length m code 6 B 9 C 12 D 15 E Motor dimensions Motor M2 (mm) Weight ( kg) Trolley dimensions B min B max 80 E2 305 L5 150 450 E3 527 L6 2 Trolley dimensions Length E1 code B/C 362 D 362 E 213 E gear + P3/T3 motor High Low 4 0.7 4 0.7 M1 mm 467 567 667 787 P3 597 35 F gear + P3/T3 motor High Low 5 0.8 5 0.8 M3 mm 211 211 211 62 P4 690 53 H1 mm 48.5 48.5 48.5 100.5 T3 507 22 H5 mm 555 555 555 555 H5* mm 571 571 571 571 Weight kg 470 490 530 540 T4 610 45 870 E4 380 L8 581 D1 (∅ ∅) 100 E5 236 L9 40 D3 (∅ ∅) 63 E6 175 L10 40 E7 266 L13 420 E11 L7 L11 L15 376 376 525 253 373 253 249 249 96 269 373 218 C H2 mm 49 73 97 121 H gear + P4/T4 motor High Low 8 1.3 8 1.3 E8 47.5 M4 400 E9 31 M6 121 E12 34 W1 80.6 H6 638 W2 220 L2 33 L4 427 D002097_A 062143 Note: All dimensions in mm. Note: Weight calculated with P3 motor, when B=300 mm. Note: Dimensions E8, E9 and E12 with RST cubicles. * Please, disregard the dimension H5*. English 30/12/2011 151 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist NC, REEVING: 04 English 30/12/2011 152 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 70 NORMAL HEADROOM HOIST NC, REEVING: 04, CURVED TRACK Hoisting speed (m/min) Load Class kg Fem/ISO 4000 3m/M6 5000 2m/M5 Hoist dimensions HOL Length m code 6 B 9 C 12 D 15 E E gear + P3/T3 motor High Low 4 0.7 4 0.7 M1 mm 467 567 667 787 F gear + P3/T3 motor High Low 5 0.8 5 0.8 M3 mm 211 211 11 11 H1 mm 48.5 48.5 177.5 177.5 Motor dimensions Motor M2 (mm) Weight ( kg) P3 597 35 Trolley dimensions B1 min B1 max B2 min B2 max C1 C2 90 E5 236 L13 600 350 E7 266 M4 400 870 E8 47.5 M6 121 1030 E9 31 W1 80.6 E3 E6 E11 527 687 175 335 376 35 80 E2 305 L7 253 450 E4 380 L10 40 Trolley dimensions Length E1 code B/C 362 D/E 180 P4 690 53 T3 507 22 H2 mm 49 73 97 121 H gear + P4/T4 motor High Low 8 1.3 8 1.3 H5 mm 555 555 555 555 H5* mm 571 571 571 571 Weight kg 360 400 550 565 T4 610 45 D1 (∅ ∅) 100 E12 34 D3 (∅ ∅) 63 H6 638 L2 33 L8 L9 L11 L15 581 742 40 42 249 66 269 191 L4 427 L5 150 L6 2 D003841_A 062169 Track radius B 80 110 120 - 109 119 450 R min 2500 2000 1500 Note: All dimensions in mm. Note: Weight calculated with P3 motor. Note: Dimensions E8, E9 and E12 with RST cubicles. * Please, disregard the dimension H5*. English 30/12/2011 153 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist NC, REEVING: 04, Curved Track English 30/12/2011 154 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 71 NORMAL HEADROOM HOIST ND, REEVING: 02 Hoisting speed (m/min) Load Class kg Fem/ISO 4000 3m/M6 5000 2m/M5 6300 1Am/M4 E gear + P5/T5 motor High Low 8 1.3 8 1.3 8 1.3 Hoist dimensions HOL Length m code 18 D 24 E 32 F 40 G Motor dimensions Motor P5 M2 (mm) 722 Weight ( kg) 58 Trolley dimensions B min B max 120 E1 5 L12 2 610 E4 540 L17 16 M1 mm 697 817 967 1157 P6 722 85 C 1080 H6 667 M6 148 P7 762 105 D1 (∅ ∅) 100 L2 33 W1 80.6 F gear + P5/T5 motor High Low 10 1.7 10 1.7 - M3 mm 45 45 70 70 T5 642 45 D3 (∅ ∅) 63 L4 513 H2 mm 176 235 309 403 T6 722 65 L5 150 H gear + P6/T6 motor High Low 16 2.7 16 2.7 - H5 mm 625 625 625 625 J gear + P7/T7 motor High Low 20 3.3 20 3.3 - H5* mm 645 645 645 645 Weight kg 750 820 900 960 Travelling dimensions Motor MF06MA M4 (mm) 360 T7 722 71 L6 2 L7 253 L8 697 L9 40 MF06LA 400 L10 40 L11 138 D002114_A 062272 Trolley dimensions Length H1 code D/E 108 F/G 83 L13 L15 494 522 177 464 Note: All dimensions in mm. Note: Weight calculated with P6 motor, when B=300 mm. * Please, disregard the dimension H5*. English 30/12/2011 155 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 02 English 30/12/2011 156 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 72 NORMAL HEADROOM HOIST ND, REEVING: 02, CURVED TRACK Hoisting speed (m/min) Load Class kg Fem/ISO 4000 3m/M6 5000 2m/M5 6300 1Am/M4 E gear + P5/T5 motor High Low 8 1.3 8 1.3 8 1.3 Hoist dimensions HOL Length m code 18 D 24 E 32 F 40 G Motor dimensions Motor P5 M2 (mm) 722 Weight ( kg) 58 Trolley dimensions B min B max 90 E1 38 L11 88 350 E4 540 L12 8.5 M1 mm 697 817 967 1157 P6 722 85 C 1230 H1 136 L17 16 P7 762 105 D1 (∅ ∅) 100 H6 667 M3 12 F gear + P5/T5 motor High Low 10 1.7 10 1.7 - H2 mm 176 235 309 403 T5 642 45 D3 (∅ ∅) 63 L2 33 M6 148 H5 mm 625 625 625 625 T6 722 65 L4 513 W1 80.6 H gear + P6/T6 motor High Low 16 2.7 16 2.7 - H5* mm 645 645 645 645 T7 722 71 L5 150 J gear + P7/T7 motor High Low 20 3.3 20 3.3 - Weight kg 810 870 940 1000 Travelling dimensions Motor MF06MA M4 (mm) 360 L6 2 L7 253 L8 842 MF06LA 400 L9 42 L10 40 D004135_A 062273 Trolley dimensions Length L13 code D/E 520 F/G 640 Track radius B 90 - 109 110 - 119 120 - 350 L15 184 404 R min 2500 2000 1500 Note: All dimensions in mm. Note: Weight calculated with P5 motor. * Please, disregard the dimension H5*. English 30/12/2011 157 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 02, Curved Track English 30/12/2011 158 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 73 NORMAL HEADROOM HOIST ND, REEVING: 04 Hoisting speed (m/min) Load Class kg Fem/ISO 5000 3m/M6 6300 3m/M6 8000 3m/M6 10000 2m/M5 E gear + P5/T5 motor High Low 4 0.7 4 0.7 4 0.7 4 0.7 Hoist dimensions HOL Length m code 9 D 12 E 16 F 20 G M1 mm 697 817 967 1157 Motor dimensions Motor M2 (mm) Weight ( kg) P6 722 85 Trolley dimensions B min B max 80 E1 5 L12 2 610 E4 540 L17 16 P5 722 58 C 1024 H6 643 M4 400 D1 (∅ ∅) 100 L2 33 M6 148 F gear + P5/T5 motor High Low 5 0.8 5 0.8 5 0.8 5 0.8 M3 mm 45 45 70 70 P7 762 105 D3 (∅ ∅) 63 L4 513 W1 80.6 H2 mm 88 118 156 204 T5 642 45 L5 150 H gear + P6/T6 motor High Low 8 1.3 8 1.3 8 1.3 8 1.3 H5 mm 649 649 649 649 T6 722 65 T7 722 71 L6 2 L7 253 J gear + P7/T7 motor High Low 10 1.7 10 1.7 10 1.7 10 1.7 H5* mm 669 669 669 669 L8 697 Weight kg 790 850 930 990 L9 40 L10 40 L11 138 D002120_A 062274 Trolley dimensions Length H1 code D/E 188 F/G 163 L13 L15 494 522 177 464 Note: All dimensions in mm. Note: Weight calculated with P6 motor, when B=300 mm. * Please, disregard the dimension H5*. English 30/12/2011 159 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 04 English 30/12/2011 160 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 74 NORMAL HEADROOM HOIST ND, REEVING: 04, CURVED TRACK Hoisting speed (m/min) Load Class kg Fem/ISO 5000 3m/M6 6300 3m/M6 8000 3m/M6 10000 2m/M5 E gear + P5/T5 motor High Low 4 0.7 4 0.7 4 0.7 4 0.7 Hoist dimensions HOL Length m code 9 D 12 E 16 F 20 G M1 mm 697 817 967 1157 Motor dimensions Motor M2 (mm) Weight ( kg) P6 722 85 Trolley dimensions B min B max 90 E1 38 L11 88 350 E4 540 L12 8.5 P5 722 58 C 1170 H1 220 L17 16 D1 (∅ ∅) 100 H6 643 M3 12 F gear + P5/T5 motor High Low 5 0.8 5 0.8 5 0.8 5 0.8 M3 mm 520 520 640 640 P7 762 105 D3 (∅ ∅) 63 L2 33 M4 400 H1 mm 88 118 156 204 T5 642 45 L4 513 M6 148 H gear + P6/T6 motor High Low 8 1.3 8 1.3 8 1.3 8 1.3 H5 mm 649 649 649 649 T6 722 65 L5 150 W1 80.6 H5* mm 669 669 669 669 J gear + P7/T7 motor High Low 10 1.7 10 1.7 10 1.7 10 1.7 Weight kg 880 930 1000 1090 T7 722 71 L6 2 L7 253 L8 842 L9 42 L10 40 D004136_A 062275 Trolley dimensions Length L13 code D/E 520 F/G 640 Track radius B 90 - 109 110 - 119 120 - 350 L15 184 404 R min 2500 2000 1500 Note: All dimensions in mm. Note: Weight calculated with P5 motor. * Please, disregard the dimension H5*. English 30/12/2011 161 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 04, Curved Track English 30/12/2011 162 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 75 NORMAL HEADROOM HOIST ND, REEVING: 06 Hoisting speed (m/min) Load Class kg Fem/ISO 12000 3m/M6 15000 2m/M5 F gear + P5/T5 motor High Low 3.2 0.5 3.2 0.5 Hoist dimensions HOL Length m code 6 D 8 E 10 F 13 G Motor dimensions Motor MOT (mm) Weight ( kg) P5 578 58 Trolley dimensions B min B max 110 BU 288 M1 mm 558 678 828 1018 610 BUH 40 P6 578 85 C 1413 GEA 143 ∅ BU 63 H4 612 H gear + P6/T6 motor High Low 5 0.8 5 0.8 M2 mm 33 33 33 33 P7 618 105 ∅ WD 125 TF 40 H1 mm 556 556 596 596 T5 498 45 TD 716 H2 mm 53 78 98 132 T6 578 65 TH 170 T7 578 71 J gear + P7/T7 motor High Low 6.3 1.1 6.3 1.1 H3 mm 605 605 605 605 H3* mm 625 625 625 625 Travelling dimensions Motor MF06MA TMO (mm) 360 Weight kg 1030 1050 1140 1195 MF06LA 400 TW 41.5 D007206_A 124578 Trolley dimensions Length code BF D/E 110 F/G 370 TS 600 720 Note: All dimensions in mm. Note: Weight calculated with P5 motor, when B=300 mm * Please, disregard the dimension H3*. English 30/12/2011 163 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 06 English 30/12/2011 164 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 76 NORMAL HEADROOM HOIST ND, REEVING: 06, CURVED TRACK Hoisting speed (m/min) Load Class kg Fem/ISO 12000 3m/M6 15000 2m/M5 F gear + P5/T5 motor High Low 3.2 0.5 3.2 0.5 Hoist dimensions HOL Length m code 6 D 8 E 10 F 13 G Motor dimensions Motor MOT (mm) Weight ( kg) P5 578 58 Trolley dimensions B min B max 120 BU 288 M1 mm 558 678 828 1018 300 BUH 40 P6 578 85 ∅ BU 63 H4 612 C 1568 GEA 143 H gear + P6/T6 motor High Low 5 0.8 5 0.8 M2 mm 33 33 33 33 P7 618 105 ∅ WD 125 TF 39.5 H1 mm 556 556 596 596 T5 498 45 H2 mm 53 78 98 132 T6 578 65 T7 578 71 J gear + P7/T7 motor High Low 6.3 1.1 6.3 1.1 H3 mm 605 605 605 605 H3* mm 625 625 625 625 Travelling dimensions Motor MF06MA TMO (mm) 360 Weight kg 1110 1155 1245 1300 MF06LA 400 R min 2500 TD 871 TH 170 TW 41.5 D007207_A 124579 Trolley dimensions Length code BF D/E 110 F/G 370 TS 600 720 Note: All dimensions in mm. Note: Weight calculated with P5 motor. * Please, disregard the dimension H3*. English 30/12/2011 165 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 06, Curved Track English 30/12/2011 166 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 77 NORMAL HEADROOM HOIST ND, REEVING: 08 Hoisting speed (m/min) Load Class kg Fem/ISO 16000 2m/M5 20000 1Am/M4 F gear + P5/T5 motor High Low 2.5 0.4 2.5 0.4 Hoist dimensions HOL Length m code 4.5 D 6 E 8 F 10 G Motor dimensions Motor MOT (mm) Weight ( kg) P5 578 58 Trolley dimensions B min B max 110 BU 288 M1 mm 558 678 828 1018 610 BUH 40 P6 578 85 C 1413 GEA 143 ∅ BU 63 H4 612 H gear + P6/T6 motor High Low 4 0.7 4 0.7 M2 mm 33 33 33 33 P7 618 105 ∅ WD 125 TF 39.5 H1 mm 556 556 596 596 T5 498 45 H2 mm 44 53 76 98 T6 578 65 TD 716 TH 170 T7 578 71 J gear + P7/T7 motor High Low 5 0.8 5 0.8 H3 mm 730 730 730 730 H3* mm 750 750 750 750 Travelling dimensions Motor MF06MA TMO (mm) 360 Weight kg 1040 1060 1150 1210 MF06LA 400 TW 41.5 D007208_A 124580 Trolley dimensions Length code BF D/E 110 F/G 370 TS 600 720 Note: All dimensions in mm. Note: Weight calculated with P5 motor, when B=300 mm. * Please, disregard the dimension H3*. English 30/12/2011 167 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 08 English 30/12/2011 168 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 78 NORMAL HEADROOM HOIST ND, REEVING: 08, CURVED TRACK Hoisting speed (m/min) Load Class kg Fem/ISO 16000 2m/M5 20000 1Am/M4 F gear + P5/T5 motor High Low 2.5 0.4 2.5 0.4 Hoist dimensions HOL Length m code 4.5 D 6 E 8 F 10 G Motor dimensions Motor MOT (mm) Weight ( kg) P5 578 58 Trolley dimensions B min B max 120 BU 288 M1 mm 558 678 828 1018 300 BUH 40 P6 578 85 ∅ BU 63 H4 612 C 1568 GEA 143 H gear + P6/T6 motor High Low 4 0.7 4 0.7 M2 mm 33 33 33 33 P7 618 105 ∅ WD 125 TF 39.5 H1 mm 556 556 596 596 T5 498 45 H2 mm 44 53 76 98 T6 578 65 T7 578 71 J gear + P7/T7 motor High Low 5 0.8 5 0.8 H3 mm 605 605 605 605 H3* mm 625 625 625 625 Travelling dimensions Motor MF06MA TMO (mm) 360 Weight kg 1120 1170 1260 1315 MF06LA 400 R min 2500 TD 716 TH 170 TW 41.5 D007209_A 124581 Trolley dimensions Length code BF D/E 110 F/G 370 TS 600 720 Note: All dimensions in mm. Note: Weight calculated with P5 motor. * Please, disregard the dimension H3*. English 30/12/2011 169 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 08, Curved Track English 30/12/2011 170 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 79 NORMAL HEADROOM HOIST ND, REEVING: 22 Hoisting speed (m/min) Load Class kg Fem/ISO 4000 3m/M6 5000 2m/M5 E gear + P5/T5 motor High Low 8 1.3 8 1.3 Hoist dimensions HOL Length m code 8.5 D 13 E 18 F 25 G 33.5 H 46 J M1 mm 558 678 828 1018 1268 1618 Motor dimensions Motor P5 MOT (mm) 578 Weight ( kg) 58 Trolley dimensions B min B max 90 BU 253 610 BUH 40 M2 mm 279 339 414 509 634 809 P6 578 85 C 1200 GEA 143 BRA mm 128 128 P7 618 105 ∅ BU 63 H4 602 F gear + P5/T5 motor High Low 10 1.7 10 1.7 H1 mm 553 553 553 753 753 753 T5 498 45 ∅ WD 100 TD 676 T6 578 65 TF 35 TH 150 H gear + P6/T6 motor High Low 16 2.7 16 2.7 H3 mm 595 595 595 595 595 595 T7 578 71 H3* mm 615 615 615 615 615 615 J gear + P7/T7 motor High Low 20 3.3 20 3.3 Weight kg 870 890 940 1085 1160 1245 Travelling dimensions Motor MF06MA TMO (mm) 360 MF06LA 400 TW 33 D007219_A 124936 Trolley dimensions Length BF code D/E/F 113 G/H/J -77 TS 300 500 Note: Weight calculated with P5, when B=300 mm. Note: All dimensions in mm. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension H3*. English 30/12/2011 171 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 22 English 30/12/2011 172 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 80 NORMAL HEADROOM HOIST ND, REEVING: 22, CURVED TRACK Hoisting speed (m/min) Load Class kg Fem/ISO 4000 3m/M6 5000 2m/M5 E gear + P5/T5 motor High Low 8 1.3 8 1.3 Hoist dimensions HOL Length m code 8.5 D 13 E 18 F 25 G 33.5 H 46 J M1 mm 558 678 828 1018 1268 1618 Motor dimensions Motor P5 MOT (mm) 578 Weight ( kg) 58 P6 578 85 Trolley dimensions B min B max 90 BU 253 350 BUH 40 C 1353 GEA 143 M2 mm 279 339 414 509 634 809 P7 618 105 ∅ BU 63 H4 602 F gear + P5/T5 motor High Low 10 1.7 10 1.7 BRA mm 128 128 T5 498 45 ∅ WD 100 TD 829 H1 mm 553 553 553 753 753 753 T6 578 65 TF 42 H gear + P6/T6 motor High Low 16 2.7 16 2.7 H3 mm 595 595 595 595 595 595 H3* mm 615 615 615 615 615 615 Weight kg 890 945 1000 1145 1215 1330 Travelling dimensions Motor MF06MA TMO (mm) 360 T7 578 71 TH 150 J gear + P7/T7 motor High Low 20 3.3 20 3.3 MF06LA 400 TW 30.5 D007220_A 124937 Track radius B 90 110 120 - 109 119 350 R min 2500 2000 1500 Trolley dimensions Length BF code D/E/F 113 G/H/J -77 TS 300 500 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension H3*. English 30/12/2011 173 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 22, Curved Track English 30/12/2011 174 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 81 NORMAL HEADROOM HOIST ND, REEVING: 24 Hoisting speed (m/min) Load Class kg Fem/ISO 6300 3m/M6 8000 3m/M6 10000 2m/M5 E gear + P5/T5 motor High Low 4 0.7 4 0.7 4 0.7 Hoist dimensions HOL Length m code 4 D 6.5 E 9 F 12.5 G 16.5 H 23 J M1 mm 558 678 828 1018 1268 1618 Motor dimensions Motor P5 MOT (mm) 578 Weight ( kg) 58 Trolley dimensions B min B max 90 BU 253 610 BUH 40 P6 578 85 C 1365 GEA 143 M2 mm 279 339 414 509 634 809 P7 618 105 ∅ BU 63 H4 602 F gear + P5/T5 motor High Low 5 0.8 5 0.8 5 0.8 BRA mm 128 128 T5 498 45 ∅ WD 100 TD 676 H1 mm 553 553 553 753 753 753 T6 578 65 TF 35 H gear + P6/T6 motor High Low 8 1.3 8 1.3 8 1.3 TH 150 T7 578 71 H3 mm 595 595 595 595 595 595 J gear + P7/T7 motor High Low 10 1.7 10 1.7 10 1.7 H3* mm 615 615 615 615 615 615 Weight kg 950 970 1020 1165 1240 1325 Travelling dimensions Motor MF06LA TMO (mm) 400 TW 31 D007221_A 124938 Trolley dimensions Length BF code D/E/F 113 G/H/J -77 TS 300 500 Note: Weight calculated with P5 motor, when B=300 mm. Note: All dimensions in mm. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension H3*. English 30/12/2011 175 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 24 English 30/12/2011 176 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 82 NORMAL HEADROOM HOIST ND, REEVING: 24, CURVED TRACK Hoisting speed (m/min) Load Class kg Fem/ISO 6300 3m/M6 8000 3m/M6 10000 2m/M5 E gear + P5/T5 motor High Low 4 0.7 4 0.7 4 0.7 Hoist dimensions HOL Length m code 4 D 6.5 E 9 F 12.5 G 16.5 H 23 J Motor dimensions Motor MOT (mm) Weight ( kg) Trolley dimensions B min B max 90 BU 253 350 BUH 40 M1 mm 558 678 828 1018 1268 1618 P5 578 58 P6 578 85 C 1518 GEA 143 ∅ BU 63 H4 602 F gear + P5/T5 motor High Low 5 0.8 5 0.8 5 0.8 M2 mm 279 339 414 509 634 809 BRA mm 128 128 P7 618 105 T5 498 45 ∅ WD 100 TD 829 TF 42 H gear + P6/T6 motor High Low 8 1.3 8 1.3 8 1.3 H1 mm 553 553 553 753 753 753 H3 mm 595 595 595 595 595 595 T6 578 65 TH 150 J gear + P7/T7 motor High Low 10 1.7 10 1.7 10 1.7 H3* mm 615 615 615 615 615 615 Weight kg 980 1025 1075 1220 1295 1405 Travelling dimensions Motor MF06LA TMO (mm) 400 T7 578 71 TW 31 D007222_A 124939 Track radius B 90 - 109 110 - 119 120 - 350 R min 2500 2000 1500 Trolley dimensions Length code D/E/F G/H/J BF TS 113 -77 300 500 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension H3*. English 30/12/2011 177 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 24, Curved Track English 30/12/2011 178 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 83 NORMAL HEADROOM HOIST ND, REEVING: 26 Hoisting speed (m/min) Load Class kg Fem/ISO 12000 3m/M6 15000 2m/M5 F gear + P5/T5 motor High Low 3.2 0.5 3.2 0.5 Hoist dimensions HOL Length m code 4 E 6 F 8 G 11 H 15 J M1 mm 678 828 1018 1268 1618 Motor dimensions Motor P5 MOT (mm) 578 Weight ( kg) 58 P6 578 85 Trolley dimensions B min B max 100 BU 288 610 BUH 40 C 1408 GEA 143 M2 mm 339 414 509 634 809 P7 618 105 ∅ BU 63 H4 602 H gear + P6/T6 motor High Low 5 0.8 5 0.8 BRA mm 128 128 T5 498 45 ∅ WD 125 TD 716 H1 mm 588 588 788 788 788 T6 578 65 TF 40 TH 170 T7 578 71 J gear + P7/T7 motor High Low 6.3 1.1 6.3 1.1 H3 mm 595 595 595 595 595 H3* mm 615 615 615 615 615 Travelling dimensions Motor MF06MA TMO (mm) 360 Weight kg 990 1010 1060 1205 1280 MF06LA 400 TW 41.5 D007223_A 124940 Trolley dimensions Length BF code E/F 113 G/H/J -77 TS 300 500 Note: Weight calculated with P5 motor, when B=300 mm. Note: All dimensions in mm. Note: gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension H3*. English 30/12/2011 179 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 26 English 30/12/2011 180 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 84 NORMAL HEADROOM HOIST ND, REEVING: 26, CURVED TRACK Hoisting speed (m/min) Load Class kg Fem/ISO 12000 3m/M6 15000 2m/M5 HOL m 4 6 8 11 15 F gear + P5/T5 motor High Low 3.2 0.5 3.2 0.5 Hoist dimensions Length M1 code mm E 678 F 828 G 1018 H 1268 J 1618 Motor dimensions Motor P5 MOT (mm) 578 Weight ( kg) 58 Trolley dimensions B min B max 120 BU 288 300 BUH 40 P6 578 85 C 1563 GEA 143 M2 mm 339 414 509 634 809 P7 618 105 ∅ BU 63 H4 602 H gear + P6/T6 motor High Low 5 0.8 5 0.8 BRA mm 128 128 T5 498 45 ∅ WD 125 TD 871 H1 mm 588 588 788 788 788 T6 578 65 H3 mm 595 595 595 595 595 T7 578 71 J gear + P7/T7 motor High Low 6.3 1.1 6.3 1.1 H3* mm 615 615 615 615 615 Weight kg 1115 1165 1310 1385 1495 Travelling dimensions Motor MF06MA TMO (mm) 360 MF06LA 400 R min 2500 TF 40 TH 170 TW 41.5 D007224_A 124941 Trolley dimensions Length BF code E/F 113 G/H/J -77 TS 300 500 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension H3*. English 30/12/2011 181 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 26, Curved Track English 30/12/2011 182 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 85 NORMAL HEADROOM HOIST ND, REEVING: 28 Hoisting speed (m/min) Load Class kg Fem/ISO 16000 2m/M5 20000 1Am/M4 F gear + P5/T5 motor High Low 2.5 0.4 2.5 0.4 Hoist dimensions HOL Length m code 4.5 F 6 G 8 H 11.5 J Motor dimensions Motor MOT (mm) Weight ( kg) Trolley dimensions B min B max 100 BU 288 610 BUH 40 M1 mm 828 1018 1268 1618 P5 578 58 P6 578 85 C 1408 GEA 143 ∅ BU 63 H4 602 H gear + P6/T6 motor High Low 4 0.7 4 0.7 M2 mm 414 509 634 809 P7 618 105 ∅ WD 125 TD 716 BRA mm 128 128 T5 498 45 TF 40 H1 mm 588 788 788 788 T6 578 65 TH 170 H3 mm 595 595 595 595 T7 578 71 J gear + P7/T7 motor High Low 5 0.8 5 0.8 H3* mm 615 615 615 615 Weight kg 1075 1220 1295 1380 Travelling dimensions Motor MF06MA TMO (mm) 360 MF06LA 400 TW 41.5 D007225_A 124942 Trolley dimensions Length BF code F 113 G/H/J -77 TS 300 500 Note: Weight calculated with P5 motor, when B=300 mm. Note: All dimensions in mm. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension H3*. English 30/12/2011 183 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 28 English 30/12/2011 184 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 86 NORMAL HEADROOM HOIST ND, REEVING: 28, CURVED TRACK Hoisting speed (m/min) Load Class kg Fem/ISO 16000 2m/M5 20000 1Am/M4 F gear + P5/T5 motor High Low 2.5 0.4 2.5 0.4 Hoist dimensions HOL Length m code 4.5 F 6 G 8 H 11.5 J Motor dimensions Motor MOT (mm) Weight ( kg) Trolley dimensions B min B max 120 BU 288 300 BUH 40 M1 mm 828 1018 1268 1618 P5 578 58 P6 578 85 C 1563 GEA 143 ∅ BU 63 H4 602 M2 mm 414 509 634 809 P7 762 105 ∅ WD 125 TD 871 H gear + P6/T6 motor High Low 4 0.7 4 0.7 BRA mm 128 128 T5 642 45 H1 mm 588 788 788 788 T6 578 65 H3 mm 595 595 595 595 T7 578 71 J gear + P7/T7 motor High Low 5 0.8 5 0.8 H3* mm 615 615 615 615 Weight kg 1180 1325 1400 1510 Travelling dimensions Motor MF06MA TMO (mm) 360 MF06LA 400 R min 2500 TF 40 TH 170 TW 41.5 D007226_A 124943 Trolley dimensions Length BF code F 113 G/H/J -77 TS 300 500 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension H3*. English 30/12/2011 185 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 28, Curved Track English 30/12/2011 186 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 87 NORMAL HEADROOM HOIST NE, REEVING: 02 Hoisting speed (m/min) Load kg 6300 8000 10000 E gear High Low 8 1.3 P6/T6 motor P6/T6 motor P6/T6 motor Class Fem/ISO 3m/M6 2m/M5 1Am/M4 Hoist dimensions HOL Length m code 15.5 C 21 D 28 E 36 F 47 G 61 H 80.5 J 97 K E11 mm 605 605 605 605 605 605 1064 1064 F gear High Low 10 1.7 P6/T6 motor P6/T6 motor P7/T7 motor M1 mm 462 562 682 832 1022 1272 1622 1922 Motor dimensions Motor M2 (mm) Weight ( kg) P6 536 85 Trolley dimensions B1 min B1 max B2 min B2 max C 180 E3 126 L1 1588.5 M4 409 320 E4 600 L2 41.5 M5 44 1752 E5 315 L4 707 M6 218 120 E1 605 H5 832.5 L12 52.5 610 E2 600 H6 756 L14 36.5 P7 576 105 M3 mm 610 610 560 560 640 640 600 600 P8 711 106 G gear High Low 12.5 2 P7/T7 motor P7/T7 motor P8/T8 motor L13 mm 1310 1310 1540 1540 2050 2050 1910 1910 T6 536 65 D1 (∅ ∅) 125 E6 272 L5 170 D3 (∅ ∅) 63 E7 435 L6 1.5 L15 mm 200 200 200 200 200 200 659 659 H gear High Low 16 T8 motor T8 motor T9 motor H1 mm 550 550 500 500 580 580 540 540 T7 536 71 H2 mm 139 188 251 322 421 546 721 868 T8 536 81 J gear High Low 20 T9 motor T9 motor TA motor Weight A kg 2000 2000 2200 2300 2500 2700 3100 3300 Weight B kg 2200 2300 2400 2500 2700 2900 3400 3600 T9 536 92 TA 576 106 Min R 2500 E8 247 L7 288 E9 400 L8 946 E10 206 L9 34.5 H3 104.5 L10 40 H4 121.5 L11 200 D006985_A 103527 Note: Weight calculated with P6 motor when B=300 mm. Note: All dimensions in mm. Note: Dimensions B1 min, B1 max, E6, and Weight A for normal track suspension. Note: Dimensions B2 min, B2 max, E8, Weight B and Min R for curved track suspension (option). English 30/12/2011 187 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist NE, REEVING: 02 Electric panel size for hoists with Crane electric provisions Trolley travel control type Electric panel size + additional panel size Main voltage 400V or 460V Electric panel size + additional panel size Other main voltages * Inverter in bridge panel. 2-speed --or-MicroDrive TravelMaster 3 power rating 002 TravelMaster 3 power ratings 003-004 TravelMaster 3 power ratings 005-007 TravelMaster 2p power ratings 002-005 TravelMaster 2p power ratings 007-011 600x600 600x600 1000x600 600x600* 600x600 + 600x400 600x600* 1000x600 1000x600 1000x600 + 600x400 600x600* 600x600* 600x600* 2-speed --or-MicroDrive TravelMaster 3 power rating 002 TravelMaster 3 power ratings 003-004 TravelMaster 3 power ratings 005-007 TravelMaster 2p power ratings 002-005 TravelMaster 2p power ratings 007-011 1000x600 1000x600 1000x600 1000x600 + 1000x600 1000x600 + 600x400 1000x600 + 1000x600 1000x600 1000x600 1000x600 + 600x400 1000x600 + 1000x600** 1000x600 + 600x400 1000x600 + 1000x600** Electric panel size for hoists with Solo electric provisions Trolley travel control type Electric panel size + additional panel size Main voltage 400V or 460V Electric panel size + additional panel size Other main voltages **Transformer in bridge panel. Note: For hoists with Solo electric provisions and a hoisting inverter, a special cubicle layout is required. Please consult the factory. Note: Detail views A for normal track suspension. Detail views B for curved track suspension (option). Note: X points the location for an auxiliary electrical cubicle. English 30/12/2011 188 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 88 NORMAL HEADROOM HOIST NE, REEVING: 04 Hoisting speed (m/min) Load kg 12500 16000 20000 E gear High Low 4 0.7 P6/T6 motor P6/T6 motor P6/T6 motor Class Fem/ISO 3m/M6 2m/M5 1Am/M4 Hoist dimensions HOL Length m code 7.5 C 10.5 D 14 E 18 F 23.5 G 30.5 H 40 J 48.5 K E11 mm 605 605 1085 1085 1255 1255 1574 1574 F gear High Low 5 0.8 P6/T6 motor P6/T6 motor P7/T7 motor M1 mm 462 562 682 832 1022 1272 1622 1922 Motor dimensions Motor M2 (mm) Weight ( kg) P6 536 85 Trolley dimensions B1 min B1 max B2 min B2 max C 180 E3 126 L1 1588.5 M4 429 320 E4 600 L2 53 M5 44 1762 E5 315 L4 707 M6 218 120 E1 605 H5 832.5 L12 52.5 610 E2 600 H6 756 L14 46.5 P7 576 105 M3 mm 610 610 560 560 640 640 600 600 P8 711 106 G gear High Low 6.3 1.1 P7/T7 motor P7/T7 motor P8/T8 motor H gear High Low 8 T8 motor T8 motor T9 motor L13 mm 1310 1310 1060 1060 1400 1400 1400 1400 H1 mm 550 550 500 500 580 580 540 540 T6 536 65 D1 (∅ ∅) 180 E6 282 L5 207 D3 (∅ ∅) 80 E7 435 L6 6 L15 mm 200 200 680 680 850 850 1169 1169 T7 536 71 H2 mm 69 94 125 161 210 273 360 434 T8 536 81 J gear High Low 10 T9 motor T9 motor TA motor Weight A kg 2300 2300 2500 2600 2800 3000 3400 3600 T9 536 92 Weight B kg 2500 2600 2700 2800 3000 3200 3600 3900 TA 576 106 Min R 4000 E8 282 L7 343 E9 400 L8 955 E10 206 L9 44.5 H3 104.5 L10 51.5 H4 121.5 L11 200 D006986_A 103528 Note: Weight calculated with P6 motor when B=300 mm. Note: All dimensions in mm. Note: Dimensions B1 min, B1 max, E6, and Weight A for normal track suspension. Note: Dimensions B2 min, B2 max, E8, Weight B and Min R for curved track suspension (option). English 30/12/2011 189 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist NE, REEVING: 04 Electric panel size for hoists with Crane electric provisions Trolley travel control type Electric panel size + additional panel size Main voltage 400V or 460V Electric panel size + additional panel size Other main voltages * Inverter in bridge panel. 2-speed --or-MicroDrive TravelMaster 3 power rating 002 TravelMaster 3 power ratings 003-004 TravelMaster 3 power ratings 005-007 TravelMaster 2p power ratings 002-005 TravelMaster 2p power ratings 007-011 600x600 600x600 1000x600 600x600* 600x600 + 600x400 600x600* 1000x600 1000x600 1000x600 + 600x400 600x600* 600x600* 600x600* 2-speed --or-MicroDrive TravelMaster 3 power rating 002 TravelMaster 3 power ratings 003-004 TravelMaster 3 power ratings 005-007 TravelMaster 2p power ratings 002-005 TravelMaster 2p power ratings 007-011 1000x600 1000x600 1000x600 1000x600 + 1000x600 1000x600 + 600x400 1000x600 + 1000x600 1000x600 1000x600 1000x600 + 600x400 1000x600 + 1000x600** 1000x600 + 600x400 1000x600 + 1000x600** Electric panel size for hoists with Solo electric provisions Trolley travel control type Electric panel size + additional panel size Main voltage 400V or 460V Electric panel size + additional panel size Other main voltages **Transformer in bridge panel. Note: For hoists with Solo electric provisions and a hoisting inverter, a special cubicle layout is required. Please consult the factory. Note: Detail views A for normal track suspension. Detail views B for curved track suspension (option). Note: X points the location for an auxiliary electrical cubicle. English 30/12/2011 190 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 89 NORMAL HEADROOM HOIST NE, REEVING: 06 Hoisting speed (m/min) Load kg 20000 25000 30000 E gear High Low 2.5 0.4 P6/T6 motor P6/T6 motor P6/T6 motor Class Fem/ISO 3m/M6 2m/M5 1Am/M4 Hoist dimensions HOL Length m code 5 C 7 D 9 E 12 F 15.5 G 20 H 26.5 J 32 K E11 mm 605 605 1085 1085 1255 1255 1574 1574 F gear High Low 3.2 0.5 P6/T6 motor P6/T6 motor P7/T7 motor M1 mm 462 562 682 832 1022 1272 1622 1922 Motor dimensions Motor M2 (mm) Weight ( kg) P6 536 85 Trolley dimensions B1 min B1 max B2 min B2 max C 180 E3 126 L1 1588.5 M4 429 320 E4 600 L2 53 M5 44 1881 E5 315 L4 707 M6 218 120 E1 605 H5 832.5 L12 52.5 610 E2 600 H6 756 L14 46.5 P7 576 105 M3 mm 610 610 560 560 640 640 600 600 P8 711 106 G gear High Low 4 0.7 P7/T7 motor P7/T7 motor P8/T8 motor L13 mm 1310 1310 1060 1060 1400 1400 1400 1400 T6 536 65 D1 (∅ ∅) 180 E6 282 L5 207 D3 (∅ ∅) 80 E7 435 L6 6 L15 mm 200 200 680 680 850 850 1169 1169 T7 536 71 H gear High Low 5 T8 motor T8 motor T9 motor H1 mm 550 550 500 500 580 580 540 540 H2 mm 46 63 84 107 140 182 240 289 T8 536 81 J gear High Low 6.3 T9 motor T9 motor TA motor Weight A kg 2400 2400 2600 2700 2900 3100 3500 3700 T9 536 92 Weight B kg 2600 2700 2800 2900 3100 3300 3700 4000 TA 576 106 Min R 4000 E8 282 L7 343 E9 400 L8 955 E10 206 L9 44.5 H3 104.5 L10 51.5 H4 121.5 L11 200 D006987_A 103529 Note: Weight calculated with P6 motor when B=300 mm. Note: All dimensions in mm. Note: Dimensions B1 min, B1 max, E6, and Weight A for normal track suspension. Note: Dimensions B2 min, B2 max, E8, Weight B and Min R for curved track suspension (option). English 30/12/2011 191 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist NE, REEVING: 06 Electric panel size for hoists with Crane electric provisions Trolley travel control type Electric panel size + additional panel size Main voltage 400V or 460V Electric panel size + additional panel size Other main voltages * Inverter in bridge panel. 2-speed --or-MicroDrive TravelMaster 3 power rating 002 TravelMaster 3 power ratings 003-004 TravelMaster 3 power ratings 005-007 TravelMaster 2p power ratings 002-005 TravelMaster 2p power ratings 007-011 600x600 600x600 1000x600 600x600* 600x600 + 600x400 600x600* 1000x600 1000x600 1000x600 + 600x400 600x600* 600x600* 600x600* 2-speed --or-MicroDrive TravelMaster 3 power rating 002 TravelMaster 3 power ratings 003-004 TravelMaster 3 power ratings 005-007 TravelMaster 2p power ratings 002-005 TravelMaster 2p power ratings 007-011 1000x600 1000x600 1000x600 1000x600 + 1000x600 1000x600 + 600x400 1000x600 + 1000x600 1000x600 1000x600 1000x600 + 600x400 1000x600 + 1000x600** 1000x600 + 600x400 1000x600 + 1000x600** Electric panel size for hoists with Solo electric provisions Trolley travel control type Electric panel size + additional panel size Main voltage 400V or 460V Electric panel size + additional panel size Other main voltages **Transformer in bridge panel. Note: For hoists with Solo electric provisions and a hoisting inverter, a special cubicle layout is required. Please consult the factory. Note: Detail views A for normal track suspension. Detail views B for curved track suspension (option). Note: X points the location for an auxiliary electrical cubicle. English 30/12/2011 192 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 90 NORMAL HEADROOM HOIST NE, REEVING: 22 Hoisting speed (m/min) Load kg 6300 8000 10000 Class Fem/ISO 3m/M6 2m/M5 1Am/M4 Hoist dimensions HOL HOL* m m 16.5 9 22 14.5 29.5 22 39 31.5 52 44.5 63.5 56 77 69.5 86.5 79 98 90.5 *HOL with drum brake E gear High Low 8 1.3 P6/T6 motor P6/T6 motor P6/T6 motor Length code E F G H J K L M N F gear High Low 10 1.7 P6/T6 motor P6/T6 motor P7/T7 motor E1 mm 605 605 605 605 605 925 925 860 860 M1 mm 682 832 1022 1272 1622 1922 2272 2522 2822 Motor dimensions Motor M2 (mm) Weight ( kg) P6 536 85 Trolley dimensions B1 min B1 max B2 min B2 max C 180 E4 600 L2 41.5 320 E5 315 L4 707 1729 E6 272 L5 170 120 E2 600 H6 732.5 M5 44 610 E3 126 L1 1542 M6 218 P7 576 105 G gear High Low 12.5 2.1 P7/T7 motor P7/T7 motor P8/T8 motor M3 mm 314 239 144 319 144 -306 -481 -306 -456 P8 711 106 T6 536 65 D1 (∅ ∅) 125 E7 435 L6 1.5 D3 (∅ ∅) 63 E8 247 L7 288 H1 mm 655 655 655 955 955 655 655 955 955 T7 536 71 H gear High Low 16 T8 motor T8 motor T9 motor L11 mm 195 195 195 195 195 520 520 495 495 J gear High Low 20 T9 motor T9 motor TA motor Weight A kg 2000 2100 2300 2500 2800 3000 3300 3600 3800 T8 536 81 T9 536 92 Weight B kg 2200 2300 2500 2800 3100 3300 3600 4000 4300 TA 576 106 Min R 2500 E9 400 L8 946 E10 162 L9 34.7 H3 81.5 L10 40 H4 100.5 L12 52.5 H5 809.5 M4 409 D006895_A 101302 Note: Weight calculated with P6 motor when B=300 mm. Note: All dimensions in mm. Note: Dimensions B1 min, B1 max, E6 and Weight A for normal track suspension. Note: Dimensions B2 min, B2 max, E8, Weight B and Min R for curved track suspension (option). English 30/12/2011 193 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist NE, REEVING: 22 Electric panel size for hoists with Crane electric provisions Trolley travel control type Electric panel size + additional panel size Main voltage 400V or 460V Electric panel size + additional panel size Other main voltages * Inverter in bridge panel. 2-speed --or-MicroDrive TravelMaster 3 power rating 002 TravelMaster 3 power ratings 003-004 TravelMaster 3 power ratings 005-007 TravelMaster 2p power ratings 002-005 TravelMaster 2p power ratings 007-011 600x600 600x600 1000x600 600x600* 600x600 + 600x400 600x600* 1000x600 1000x600 1000x600 + 600x400 600x600* 600x600* 600x600* 2-speed --or-MicroDrive TravelMaster 3 power rating 002 TravelMaster 3 power ratings 003-004 TravelMaster 3 power ratings 005-007 TravelMaster 2p power ratings 002-005 TravelMaster 2p power ratings 007-011 1000x600 1000x600 1000x600 1000x600 + 1000x600 1000x600 + 600x400 1000x600 + 1000x600 1000x600 1000x600 1000x600 + 600x400 1000x600 + 1000x600** 1000x600 + 600x400 1000x600 + 1000x600** Electric panel size for hoists with Solo electric provisions Trolley travel control type Electric panel size + additional panel size Main voltage 400V or 460V Electric panel size + additional panel size Other main voltages **Transformer in bridge panel. Note: For hoists with Solo electric provisions and a hoisting inverter, a special cubicle layout is required. Please consult the factory. Note: Detail views A for normal track suspension. Detail views B for curved track suspension (option). Note: X points the location for an auxiliary electrical cubicle. English 30/12/2011 194 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 91 NORMAL HEADROOM HOIST NE, REEVING: 24 Hoisting speed (m/min) Load kg 12500 16000 20000 Class Fem/ISO 3m/M6 2m/M5 1Am/M4 E gear High Low 4 0.7 P6/T6 motor P6/T6 motor P6/T6 motor Hoist dimensions HOL HOL* m m 8 4 11 7 14.5 10.5 19.5 15.5 26 22 31.5 27.5 38.5 34.5 43 39 49 45 *HOL with drum brake Length code E F G H J K L M N F gear High Low 5 0.8 P6/T6 motor P6/T6 motor P7/T7 motor E1 mm 605 605 605 605 605 925 925 860 860 M1 mm 682 832 1022 1272 1622 1922 2272 2522 2822 Motor dimensions Motor M2 (mm) Weight ( kg) P6 536 85 Trolley dimensions B1 min B1 max B2 min B2 max C 180 E4 600 L2 41.5 320 E5 315 L4 707 2037 E6 272 L5 170 120 E2 600 H6 732.5 M5 44 610 E3 126 L1 1542 M6 218 P7 576 105 P8 711 106 G gear High Low 6.3 1.1 P7/T7 motor P7/T7 motor P8/T8 motor M3 mm 314 239 144 319 144 -306 -481 -306 -456 T6 536 65 D1 (∅ ∅) 125 E7 435 L6 1.5 D3 (∅ ∅) 63 E8 247 L7 288 H1 mm 655 655 655 955 955 655 655 955 955 T7 536 71 H gear High Low 8 T8 motor T8 motor T9 motor L11 mm 195 195 195 195 195 520 520 495 495 J gear High Low 10 T9 motor T9 motor TA motor Weight A kg 2100 2200 2400 2600 2900 3100 3400 3700 3900 T8 536 81 T9 536 92 Weight B kg 2300 2400 2600 2900 3100 3400 3700 4100 4300 TA 576 106 Min R 2500 E9 400 L8 946 E10 162 L9 34.7 H3 81.5 L10 40 H4 100.5 L12 52.5 H5 809.5 M4 409 D006896_A 101303 Note: Weight calculated with P6 motor when B=300 mm. Note: All dimensions in mm. Note: Dimensions B1 min, B1 max, E6, and Weight A for normal track suspension. Note: Dimensions B2 min, B2 max, E8, Weight B and Min R for curved track suspension (option). English 30/12/2011 195 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist NE, REEVING: 24 Electric panel size for hoists with Crane electric provisions Trolley travel control type Electric panel size + additional panel size Main voltage 400V or 460V Electric panel size + additional panel size Other main voltages * Inverter in bridge panel. 2-speed --or-MicroDrive TravelMaster 3 power rating 002 TravelMaster 3 power ratings 003-004 TravelMaster 3 power ratings 005-007 TravelMaster 2p power ratings 002-005 TravelMaster 2p power ratings 007-011 600x600 600x600 1000x600 600x600* 600x600 + 600x400 600x600* 1000x600 1000x600 1000x600 + 600x400 600x600* 600x600* 600x600* 2-speed --or-MicroDrive TravelMaster 3 power rating 002 TravelMaster 3 power ratings 003-004 TravelMaster 3 power ratings 005-007 TravelMaster 2p power ratings 002-005 TravelMaster 2p power ratings 007-011 1000x600 1000x600 1000x600 1000x600 + 1000x600 1000x600 + 600x400 1000x600 + 1000x600 1000x600 1000x600 1000x600 + 600x400 1000x600 + 1000x600** 1000x600 + 600x400 1000x600 + 1000x600** Electric panel size for hoists with Solo electric provisions Trolley travel control type Electric panel size + additional panel size Main voltage 400V or 460V Electric panel size + additional panel size Other main voltages **Transformer in bridge panel. Note: For hoists with Solo electric provisions and a hoisting inverter, a special cubicle layout is required. Please consult the factory. Note: Detail views A for normal track suspension. Detail views B for curved track suspension (option). Note: X points the location for an auxiliary electrical cubicle. English 30/12/2011 196 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 92 NORMAL HEADROOM HOIST NE, REEVING: 26 Hoisting speed (m/min) Load kg 20000 25000 30000 Class Fem/ISO 3m/M6 2m/M5 1Am/M4 E gear High Low 2.5 0.4 P6/T6 motor P6/T6 motor P6/T6 motor Hoist dimensions HOL HOL* m m 5.5 3 7 4.5 9.5 7 13 11.5 17 14.5 21 18.5 25.5 23 28.5 26 32.5 30 *HOL with drum brake Motor dimensions Motor M2 (mm) Weight ( kg) Trolley dimensions B1 min B1 max 130 E2 600 H6 732.5 M5 44 610 E3 126 L1 1542 M6 218 Length code E F G H J K L M N F gear High Low 3.2 0.5 P6/T6 motor P6/T6 motor P7/T7 motor E1 mm 605 605 605 605 605 925 925 860 860 P6 536 85 M1 mm 682 832 1022 1272 1622 1922 2272 2522 2822 P7 576 105 P8 711 106 B2 min B2 max C 180 E4 600 L2 53 320 E5 315 L4 707 2086 E6 282 L5 208 G gear High Low 4 0.7 P7/T7 motor P7/T7 motor P8/T8 motor M3 mm 314 239 144 319 144 -306 -481 -306 -456 T6 536 65 D1 (∅ ∅) 180 E7 435 L6 6 D3 (∅ ∅) 80 E8 257 L7 343 H gear High Low 5 T8 motor T8 motor T9 motor H1 mm 655 655 655 955 955 655 655 955 955 T7 536 71 J gear High Low 6.3 T9 motor T9 motor TA motor L11 mm 195 195 195 195 195 520 520 495 495 Weight A kg 2400 2500 2700 2900 3200 3400 3700 4000 4200 Weight B kg 2600 2700 2900 3200 3500 3700 4000 4400 4700 T8 536 81 T9 536 92 TA 576 106 Min R 4000 E9 400 L8 956 E10 162 L9 44.5 H3 81.5 L10 51.5 H4 100.5 L12 52.5 H5 809.5 M4 429 D006897_A 101304 Note: Weight calculated with P6 motor when B=300 mm. Note: All dimensions in mm. Note: Dimensions B1 min, B1 max, E6, and Weight A for normal track suspension. Note: Dimensions B2 min, B2 max, E8, Weight B and Min R for curved track suspension (option). English 30/12/2011 197 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist NE, REEVING: 26 Electric panel size for hoists with Crane electric provisions Trolley travel control type Electric panel size + additional panel size Main voltage 400V or 460V Electric panel size + additional panel size Other main voltages * Inverter in bridge panel. 2-speed --or-MicroDrive TravelMaster 3 power rating 002 TravelMaster 3 power ratings 003-004 TravelMaster 3 power ratings 005-007 TravelMaster 2p power ratings 002-005 TravelMaster 2p power ratings 007-011 600x600 600x600 1000x600 600x600* 600x600 + 600x400 600x600* 1000x600 1000x600 1000x600 + 600x400 600x600* 600x600* 600x600* 2-speed --or-MicroDrive TravelMaster 3 power rating 002 TravelMaster 3 power ratings 003-004 TravelMaster 3 power ratings 005-007 TravelMaster 2p power ratings 002-005 TravelMaster 2p power ratings 007-011 1000x600 1000x600 1000x600 1000x600 + 1000x600 1000x600 + 600x400 1000x600 + 1000x600 1000x600 1000x600 1000x600 + 600x400 1000x600 + 1000x600** 1000x600 + 600x400 1000x600 + 1000x600** Electric panel size for hoists with Solo electric provisions Trolley travel control type Electric panel size + additional panel size Main voltage 400V or 460V Electric panel size + additional panel size Other main voltages **Transformer in bridge panel. Note: For hoists with Solo electric provisions and a hoisting inverter, a special cubicle layout is required. Please consult the factory. Note: Detail views A for normal track suspension. Detail views B for curved track suspension (option). Note: X points the location for an auxiliary electrical cubicle. English 30/12/2011 198 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 93 NORMAL HEADROOM HOIST NE, REEVING: 28 Hoisting speed (m/min) Load kg 32000 40000 Class Fem/ISO 2m/M5 1Am/M4 Hoist dimensions HOL HOL* m m 5.5 3.5 7 5 9.5 7.5 13 11 15.5 13.5 19 17 21.5 19.5 24.5 22.5 *HOL with drum brake Motor dimensions Motor M2 (mm) Weight ( kg) Trolley dimensions B1 min B1 max 130 E2 600 H6 732.5 M5 44 610 E3 126 L1 1542 M6 218 E gear High Low 2 0.3 P6/T6 motor P6/T6 motor Length code F G H J K L M N F gear High Low 2.5 0.4 P7/T7 motor P7/T7 motor E1 mm 605 605 605 605 925 925 860 860 P6 536 85 M1 mm 832 1022 1272 1622 1922 2272 2522 2822 P7 576 105 P8 711 106 B2 min B2 max C 180 E4 600 L2 53 320 E5 315 L4 707 2212 E6 282 L5 208 D1 (∅ ∅) 180 E7 435 L6 6 G gear High Low 3.2 0.5 T8 motor P8/T8 motor M3 mm 239 144 319 144 -306 -481 -306 -456 H1 mm 655 655 955 955 655 655 955 955 T6 536 65 T7 536 71 D3 (∅ ∅) 80 E8 257 L7 343 H gear High Low 4 T9 motor T9 motor L11 mm 195 195 195 195 520 520 495 495 J gear High Low 5 TA motor TA motor Weight A kg 2700 2800 3000 3300 3500 3800 4100 4400 T8 536 81 T9 536 92 Weight B kg 2900 3000 3300 3600 3900 4200 4500 4800 TA 576 106 Min R 4000 E9 400 L8 956 E10 162 L9 44.5 H3 81.5 L10 51.5 H4 100.5 L12 52.5 H5 809.5 M4 429 D006898_A 101305 Note: Weight calculated with P6 motor when B=300 mm. Note: All dimensions in mm. Note: Dimensions B1 min, B1 max, E6, and Weight A for normal track suspension. Note: Dimensions B2 min, B2 max, E8, Weight B and Min R for curved track suspension (option). English 30/12/2011 199 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist NE, REEVING: 28 Electric panel size for hoists with Crane electric provisions Trolley travel control type Electric panel size + additional panel size Main voltage 400V or 460V Electric panel size + additional panel size Other main voltages * Inverter in bridge panel. 2-speed --or-MicroDrive TravelMaster 3 power rating 002 TravelMaster 3 power ratings 003-004 TravelMaster 3 power ratings 005-007 TravelMaster 2p power ratings 002-005 TravelMaster 2p power ratings 007-011 600x600 600x600 1000x600 600x600* 600x600 + 600x400 600x600* 1000x600 1000x600 1000x600 + 600x400 600x600* 600x600* 600x600* 2-speed --or-MicroDrive TravelMaster 3 power rating 002 TravelMaster 3 power ratings 003-004 TravelMaster 3 power ratings 005-007 TravelMaster 2p power ratings 002-005 TravelMaster 2p power ratings 007-011 1000x600 1000x600 1000x600 1000x600 + 1000x600 1000x600 + 600x400 1000x600 + 1000x600 1000x600 1000x600 1000x600 + 600x400 1000x600 + 1000x600** 1000x600 + 600x400 1000x600 + 1000x600** Electric panel size for hoists with Solo electric provisions Trolley travel control type Electric panel size + additional panel size Main voltage 400V or 460V Electric panel size + additional panel size Other main voltages **Transformer in bridge panel. Note: For hoists with Solo electric provisions and a hoisting inverter, a special cubicle layout is required. Please consult the factory. Note: Detail views A for normal track suspension. Detail views B for curved track suspension (option). Note: X points the location for an auxiliary electrical cubicle. English 30/12/2011 200 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS FIXED HOIST English 30/12/2011 201 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS English 30/12/2011 202 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 94 FIXED HOIST NB, REEVING: 02 Hoisting speed (m/min) Load Class kg Fem/ISO 800 3m/M6 1000 2m/M5 1250 3m/M6 1600 2m/M5 Hoist dimensions HOL Length m code 12 A 19 C Motor dimensions Motor M2 (mm) Weight ( kg) F gear + P1/T1 motor High Low 10 1.7 10 1.7 - M1 mm 431 561 P1 498 21 P2 558 31 H2 mm 90 144 F gear + P2/T2 motor High Low 10 1.7 10 1.7 10 1.7 10 1.7 R mm 400 530 P3 588 35 G gear + P2/T2 motor High Low 12.5 2.1 12.5 2.1 12.5 2.1 12.5 2.1 H5 mm 448 448 T1 498 22 H5* mm 463 463 T2 498 22 H gear + P3/T3 motor High Low 16 2.7 16 2.7 16 2.7 16 2.7 Weight kg 125 135 T3 498 22 Trolley dimensions C D1 (∅ ∅) 195 E1 4 L11 25 18 E2 305 L12 15 E3 77.5 M3 42 E4 380 M6 115 E5 236 H1 127 H3 135 H4 155 H6 391 L4 376 L8 35 L9 100 D002071_A 062131 Note: All dimensions in mm. Note: Weight calculated with P1 motor. * Please, disregard the dimension H5*. English 30/12/2011 203 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist NB, REEVING: 02 English 30/12/2011 204 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 95 FIXED HOIST NB, REEVING: 04 Hoisting speed (m/min) Load Class kg Fem/ISO 1600 3m/M6 2000 2m/M5 2500 3m/M6 3200 2m/M5 F gear + P1/T1 motor High Low 5 0.8 5 0.8 - Hoist dimensions HOL m 6 9.5 Length code A C Motor dimensions Motor M2 (mm) Weight ( kg) P1 498 21 F gear + P2/T2 motor High Low 5 0.8 5 0.8 5 0.8 5 0.8 M1 mm 431 561 P2 558 31 H2 mm 45 72 H5 mm 461 461 P3 588 35 G gear + P2/T2 motor High Low 6.3 1.1 6.3 1.1 6.3 1.1 6.3 1.1 H5* mm 476 476 T1 498 22 T2 498 22 R mm 400 530 H gear + P3/T3 motor High Low 8 1.3 8 1.3 8 1.3 8 1.3 Weight kg 130 140 T3 498 22 Trolley dimensions C D1(∅ ∅) 145 E1 4 L11 25 18 E2 305 L12 15 E3 77.5 M3 42 E4 380 M6 115 E5 236 H1 182 H3 148 H4 142 H6 378 L4 376 L8 35 L9 100 D002078_A 062132 Note: All dimensions in mm. Note: Weight calculated with P1 motor. * Please, disregard the dimension H5*. English 30/12/2011 205 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist NB, REEVING: 04 English 30/12/2011 206 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 96 FIXED HOIST NC, REEVING: 02 Hoisting speed (m/min) Load Class kg Fem/ISO 2000 3m/M6 2500 2m/M5 3200 1Am/M4 Hoist dimensions HOL Length m code 12 B 18 C 24 D 30 E Motor dimensions Motor M2 (mm) Weight ( kg) E gear + P3/T3 motor High Low 8 1.3 8 1.3 8 1.3 M1 mm 467 567 667 787 P3 597 35 M3 mm 158 58 58 58 P4 690 53 T3 507 22 F gear + P3/T3 motor High Low 10 1.7 10 1.7 - H1 mm 239 139 139 139 H2 mm 98 147 196 256 R mm 560 560 780 780 H gear + P4/T4 motor High Low 16 2.7 16 2.7 - H5 mm 528 528 528 528 H5* mm 544 544 544 544 Weight kg 195 205 220 240 T4 610 45 Trolley dimensions C D1 (∅ ∅) 240 E1 96 L11 20 18 E2 305 L12 13 E3 147.5 M6 121 E4 380 E5 236 H3 96.5 H4 233.5 H6 459.5 L4 427 L5 11.5 L8 45 L9 120 D002086_A 062134 Note: All dimensions in mm. Note: Weight calculated with P3 motor. * Please, disregard the dimension H5*. English 30/12/2011 207 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist NC, REEVING: 02 English 30/12/2011 208 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 97 FIXED HOIST NC, REEVING: 04 Hoisting speed (m/min) Load Class kg Fem/ISO 4000 3m/M6 5000 2m/M5 6300 1Am/M4 E gear + P3/T3 motor High Low 4 0.7 4 0.7 4 0.7 Hoist dimensions HOL Length m code 6 B 9 C 12 D 15 E M1 mm 467 567 667 787 Motor dimensions Motor P3 M2 (mm) 597 Weight ( kg) 35 P4 690 53 Trolley dimensions C1 C2 215 E1 96 L11 20 232 E2 305 L12 13 D1 (∅ ∅) 18 E3 147.5 M6 121 M3 mm 158 58 58 58 T3 507 22 E4 380 F gear + P3/T3 motor High Low 5 0.8 5 0.8 - R mm 560 560 780 780 H1 mm 319.5 219.5 219.5 219.5 H2 mm 49 73 97 127 H gear + P4/T4 motor High Low 8 1.3 8 1.3 - H5 mm 551 551 551 551 H5* mm 567 567 567 567 Weight kg 200 210 220 230 T4 610 45 E5 236 H3 120 H4 210 H6 436 L4 427 L5 11.5 L8 45 L9 120 D002091_A 062135 Note: All dimensions in mm. Note: Weight calculated with P3 motor. * Please, disregard the dimension H5*. English 30/12/2011 209 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist NC, REEVING: 04 English 30/12/2011 210 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 98 FIXED HOIST ND, REEVING: 02 Hoisting speed (m/min) Load Class kg Fem/ISO 4000 3m/M6 5000 2m/M5 6300 1Am/M4 E gear + P5/T5 motor High Low 8 1.3 8 1.3 8 1.3 Hoist dimensions HOL Length m code 18 D 24 E 32 F 40 G M1 mm 697 817 967 1157 Motor dimensions Motor P5 M5 (mm) 722 Weight ( kg) 58 Trolley dimensions C D1 (∅ ∅) 366 L1 1142 18 L2 531 M2 mm 830 830 1170 1170 P6 722 85 F gear + P5/T5 motor High Low 10 1.7 10 1.7 - M3 mm 81 81 271 81 P7 762 105 M4 mm -53 67 67 67 T5 642 45 H gear + P6/T6 motor High Low 16 2.7 16 2.7 - H2 mm 176 235 310 405 T6 722 65 H3 mm 201 81 81 81 L6 mm 831 831 831 831 J gear + P7/T7 motor High Low 20 3.3 20 3.3 - L6* mm 851 851 851 851 Weight kg 430 445 460 480 T7 722 71 H1 153 L3 513 L4 18 L5 210 L7 25 L8 430 L9 175 L10 147 D002111_A 062189 Note: Weight calculated with P5 motor. Note: All dimensions in mm. * Please, disregard the dimension L6*. English 30/12/2011 211 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist ND, REEVING: 02 English 30/12/2011 212 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 99 FIXED HOIST ND, REEVING: 04 Hoisting speed (m/min) Load Class kg Fem/ISO 5000 3m/M6 6300 3m/M6 8000 3m/M6 10000 2m/M5 12500 1Am/M4 Hoist dimensions HOL Length m code 9 D 12 E 16 F 20 G E gear + P5/T5 motor High Low 4 0.7 4 0.7 4 0.7 4 0.7 4 0.7 M1 mm 697 817 967 1157 Motor dimensions Motor P5 M4 (mm) 722 Weight ( kg) 58 Trolley dimensions C1 C2 310 L1 1142 367 L2 531 M2 mm 830 830 1170 1170 P6 722 85 D1 (∅ ∅) 18 L3 513 F gear + P5/T5 motor High Low 5 0.8 5 0.8 5 0.8 5 0.8 - M3 mm 81 81 271 81 P7 762 105 M4 mm -53 67 67 67 T5 642 45 H gear + P6/T6 motor High Low 8 1.3 8 1.3 8 1.3 8 1.3 - H2 mm 88 118 156 204 T6 722 65 H3 mm 201 81 81 81 L6 mm 841 841 841 841 J gear + P7/T7 motor High Low 10 1.7 10 1.7 10 1.7 10 1.7 - L6* mm 861 861 861 861 Weight kg 445 460 480 500 T7 722 71 H1 233 L4 18 L5 193 L7 25 L8 430 L9 175 L10 147 D002116_A 062190 Note: Weight calculated with P5 motor. Note: All dimensions in mm. * Please, disregard the dimension L6*. English 30/12/2011 213 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist ND, REEVING: 04 English 30/12/2011 214 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 100 FIXED HOIST ND, REEVING: 06 Hoisting speed (m/min) Load Class kg Fem/ISO 12000 3m/M6 15000 2m/M5 Hoist dimensions HOL Length m code 6 D 8 E 10 F 13 G Motor dimensions Motor MOT (mm) Weight (kg) F gear + P5/T5 motor High Low 3.2 0.5 3.2 0.5 M1 mm 558 678 828 1018 P5 578 58 M2 mm 548 648 803 933 P6 578 85 H gear + P6/T6 motor High Low 5 0.8 5 0.8 Min R mm 1200 1400 1700 2000 P7 618 105 H1 mm 515 615 770 900 T5 498 45 J gear + P7/T7 motor High Low 6.3 1.1 6.3 1.1 H2 mm 53 78 98 132 T6 578 65 H3 mm 605 605 605 605 H3* mm 625 625 625 625 Weight kg 585 625 675 735 T7 578 71 Trolley dimensions C ∅F 693 E1 406 18 E3 60 E8 170 F1 200 F2 440 F3 70 GEA 143 H4 270 RO 70 TH 527 D007242_A 126313 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: M2 and weight calculated with Min R. Note: Standard rail gauges: 1200, 1400, 1700, 2000 and 2400. * Please, disregard the dimension H3*. English 30/12/2011 215 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist ND, REEVING: 06 English 30/12/2011 216 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 101 FIXED HOIST ND, REEVING: 08 Hoisting speed (m/min) Load Class kg Fem/ISO 16000 2m/M5 20000 1Am/M4 Hoist dimensions HOL Length m code 4.5 D 6 E 8 F 10 G Motor dimensions Motor MOT (mm) Weight (kg) F gear + P5/T5 motor High Low 2.5 0.4 2.5 0.4 M1 mm 558 678 828 1018 P5 578 58 M2 mm 548 648 803 933 P6 578 85 H gear + P6/T6 motor High Low 4 0.7 4 0.7 Min R mm 1200 1400 1700 2000 P7 618 105 H1 mm 515 615 770 900 T5 498 45 J gear + P7/T7 motor High Low 5 0.8 5 0.8 H2 mm 44 53 76 98 T6 578 65 H3 mm 605 605 605 605 H3* mm 625 625 625 625 Weight kg 600 635 690 750 T7 578 71 Trolley dimensions C ∅F 693 E1 406 18 E3 60 E8 170 F1 200 F2 440 F3 70 GEA 143 H4 270 RO 70 TH 527 D007243_A 126314 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: M2 and weight calculated with Min R. Note: Standard rail gauges: 1200, 1400, 1700, 2000 and 2400. * Please, disregard the dimension H3*. English 30/12/2011 217 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist ND, REEVING: 08 English 30/12/2011 218 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 102 FIXED HOIST ND, REEVING: 22 Hoisting speed (m/min) Load Class kg Fem/ISO 4000 3m/M6 5000 2m/M5 Hoist dimensions HOL Length m code 8.5 D 13 E 18 F 25 G 33.5 H 46 J Motor dimensions Motor MOT (mm) Weight (kg) F gear + P5/T5 motor High Low 10 1.7 10 1.7 M1 mm 558 678 828 1018 1268 1618 P5 578 58 M2 mm 321 261 186 91 216 41 P6 578 85 H gear + P6/T6 motor High Low 16 2.7 16 2.7 Min R mm 1200 1200 1200 1200 1700 1700 P7 618 105 BRA mm 128 128 T5 498 45 J gear + P7/T7 motor High Low 20 3.3 20 3.3 H3 mm 605 605 605 605 605 605 T6 578 65 H3* mm 625 625 625 625 625 625 Weight kg 505 530 555 590 670 730 T7 578 71 Trolley dimensions C ∅F 523 E1 406 18 E3 60 E8 170 F1 200 F2 440 F3 70 GEA 143 H4 270 RO 70 TH 527 D007244_A 126316 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: M2 and weight calculated with Min R. Note: Standard rail gauges: 1200 and 1700. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension H3*. English 30/12/2011 219 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist ND, REEVING: 22 English 30/12/2011 220 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 103 FIXED HOIST ND, REEVING: 24 Hoisting speed (m/min) Load Class kg Fem/ISO 8000 3m/M6 10000 2m/M5 Hoist dimensions HOL Length m code 4 D 6.5 E 9 F 12.5 G 16.5 H 23 J Motor dimensions Motor MOT (mm) Weight (kg) F gear + P5/T5 motor High Low 5 0.8 5 0.8 M1 mm 558 678 828 1018 1268 1618 P5 578 58 P6 578 85 M2 mm 321 261 186 91 216 41 H gear + P6/T6 motor High Low 8 1.3 8 1.3 Min R mm 1200 1200 1200 1200 1700 1700 P7 618 105 BRA mm 128 128 T5 498 45 J gear + P7/T7 motor High Low 10 1.7 10 1.7 H3 mm 605 605 605 605 605 605 T6 578 65 H3* mm 625 625 625 625 625 625 Weight kg 570 590 620 655 735 795 T7 578 71 Trolley dimensions C ∅F 688 E1 406 18 E3 60 E8 170 F1 200 F2 440 F3 70 GEA 143 H4 270 RO 70 TH 527 D007245_A 126317 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: M2 and weight calculated with Min R. Note: Standard rail gauges: 1200 and 1700. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension H3*. English 30/12/2011 221 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist ND, REEVING: 24 English 30/12/2011 222 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 104 FIXED HOIST ND, REEVING: 26 Hoisting speed (m/min) Load Class kg Fem/ISO 12000 3m/M6 15000 2m/M5 Hoist dimensions HOL Length m code 4 E 6 F 8 G 11 H 15 J Motor dimensions Motor MOT (mm) Weight (kg) F gear + P5/T5 motor High Low 3.2 0.5 3.2 0.5 M1 mm 678 828 1018 1268 1618 P5 578 58 M2 mm 261 186 91 216 41 P6 578 85 H gear + P6/T6 motor High Low 5 0.8 5 0.8 Min R mm 1200 1200 1200 1700 1700 P7 618 105 BRA mm 128 128 T5 498 45 J gear + P7/T6 motor High Low 6.3 1.1 6.3 1.1 H3 mm 605 605 605 605 605 T6 578 65 H3* mm 625 625 625 625 625 Weight kg 600 625 665 745 805 T7 578 71 Trolley dimensions C ∅F 688 E1 406 18 E3 60 E8 170 F1 200 F2 440 F3 70 GEA 143 H4 270 RO 70 TH 527 D007246_A 126318 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: M2 and weight calculated with Min R. Note: Standard rail gauges: 1200 and 1700. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension H3*. English 30/12/2011 223 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist ND, REEVING: 26 English 30/12/2011 224 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 105 FIXED HOIST ND, REEVING: 28 Hoisting speed (m/min) Load Class kg Fem/ISO 16000 2m/M5 20000 1Am/M4 F gear + P5/T5 motor High Low 2.5 0.4 2.5 0.4 Hoist dimensions HOL Length m code 4.5 F 6 G 8 H 11.5 J Motor dimensions Motor MOT (mm) Weight (kg) M1 mm 828 1018 1268 1618 P5 578 58 M2 mm 186 91 216 41 P6 578 85 H gear + P6/T6 motor High Low 4 0.7 4 0.7 Min R mm 1200 1200 1700 1700 P7 618 105 BRA mm 128 128 T5 498 45 J gear + P7/T7 motor High Low 5 0.8 5 0.8 H3 mm 605 605 605 605 T6 578 65 H3* mm 625 625 625 625 Weight kg 640 675 755 815 T7 578 71 Trolley dimensions C ∅F 688 E1 406 18 E3 60 E8 170 F1 200 F2 440 F3 70 GEA 143 H4 270 RO 70 TH 527 D007247_A 126319 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: M2 and weight calculated with Min R. Note: Standard rail gauges: 1200 and 1700. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension H3*. English 30/12/2011 225 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist ND, REEVING: 28 English 30/12/2011 226 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 106 FIXED HOIST NE, REEVING: 02 Hoisting speed (m/min) Load kg 6300 8000 10000 Class Fem/ISO 3m/M6 2m/M5 1Am/M4 Hoist dimensions HOL m 15.5 21 28 36 47 61 80.5 97 Motor dimensions Motor M2 (mm) Weight ( kg) E gear High Low 8 1.3 P6/T6 motor P6/T6 motor P6/T6 motor Length code C D E F G H J K P6 536 85 F gear High Low 10 1.7 P6/T6 motor P6/T6 motor P7/T7 motor R mm 1550 1550 1780 1780 2290 2290 2699 2699 G gear High Low 12.5 2 P7/T7 motor P7/T7 motor P8/T8 motor M1 mm 462 562 682 832 1022 1272 1622 1922 P7 576 105 M3 mm 730 730 560 560 640 640 810 810 P8 711 106 T6 536 65 H gear High Low 16 T8 motor T8 motor T9 motor H1 mm 670 670 620 620 700 700 660 660 T7 536 71 J gear High Low 20 T9 motor T9 motor TA motor H2 mm 139 188 251 322 421 546 721 868 T8 536 81 Weight kg 1200 1300 1300 1400 1500 1600 1900 2000 T9 536 92 TA 576 106 Trolley dimensions C D1 (∅ ∅) 754 E1 405 L4 707 18 E2 600 L5 766 E3 126 L8 20 E4 600 L9 60 E5 315 L11 320 E7 435 L12 52 E9 400 M5 44 H3 104.5 M6 218 H4 121.5 H5 832.5 H6 551.5 L1 1384 D006936_A 102573 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: X points the location for an auxiliary electrical cubicle. English 30/12/2011 227 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist NE, REEVING: 02 English 30/12/2011 228 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 107 FIXED HOIST NE, REEVING: 04 Hoisting speed (m/min) Load kg 12500 16000 20000 Class Fem/ISO 3m/M6 2m/M5 1Am/M4 Hoist dimensions HOL m 7.5 10.5 14 18 23.5 30.5 40 48.5 Motor dimensions Motor M2 (mm) Weight ( kg) E gear High Low 4 0.7 P6/T6 motor P6/T6 motor P6/T6 motor Length code C D E F G H J K P6 536 85 F gear High Low 5 0.8 P6/T6 motor P6/T6 motor P7/T7 motor R mm 1550 1550 1780 1780 2290 2290 2699 2699 G gear High Low 6.3 1.1 P7/T7 motor P7/T7 motor P8/T8 motor M1 mm 462 562 682 832 1022 1272 1622 1922 P7 576 105 M3 mm 730 730 560 560 640 640 810 810 P8 711 106 T6 536 65 H gear High Low 8 T8 motor T8 motor T9 motor H1 mm 670 670 620 620 700 700 660 660 T7 536 71 J gear High Low 10 T9 motor T9 motor TA motor H2 mm 69 94 125 161 210 273 360 434 T8 536 81 Weight kg 1300 1300 1400 1400 1600 1700 1900 2100 T9 536 92 TA 576 106 Trolley dimensions C D1 (∅ ∅) 754 E1 405 L4 707 18 E2 600 L5 766 E3 126 L8 20 E4 600 L9 60 E5 315 L11 320 E7 435 L12 52 E9 400 M5 44 H3 104.5 M6 218 H4 121.5 H5 832.5 H6 551.5 L1 1384 D006937_A 102574 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: X points the location for an auxiliary electrical cubicle. English 30/12/2011 229 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist NE, REEVING: 04 English 30/12/2011 230 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 108 FIXED HOIST NE, REEVING: 06 Hoisting speed (m/min) Load kg 20000 25000 30000 Class Fem/ISO 3m/M6 2m/M5 1Am/M4 Hoist dimensions HOL m 5 7 9 12 15.5 20 26.5 32 Motor dimensions Motor M2 (mm) Weight ( kg) E gear High Low 2.5 0.4 P6/T6 motor P6/T6 motor P6/T6 motor Length code C D E F G H J K P6 536 85 F gear High Low 3.2 0.5 P6/T6 motor P6/T6 motor P7/T7 motor R mm 1550 1550 1780 1780 2290 2290 2699 2699 G gear High Low 4 0.7 P7/T7 motor P7/T7 motor P8/T8 motor M1 mm 462 562 682 832 1022 1272 1622 1922 P7 576 105 M3 mm 730 730 560 560 640 640 810 810 P8 711 106 T6 536 65 H gear High Low 5 T8 motor T8 motor T9 motor H1 mm 670 670 620 620 700 700 660 660 T7 536 71 J gear High Low 6.3 T9 motor T9 motor TA motor H2 mm 46 63 84 107 140 182 240 289 T8 536 81 Weight kg 1300 1400 1500 1500 1600 1800 2000 2100 T9 536 92 TA 576 106 Trolley dimensions C D1 (∅ ∅) 873 E1 405 L4 707 18 E2 600 L5 766 E3 126 L8 20 E4 600 L9 60 E5 315 L11 320 E7 435 L12 52 E9 400 M5 44 H3 104.5 M6 218 H4 121.5 H5 832.5 H6 551.5 L1 1384 D006938_A 102575 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: X points the location for an auxiliary electrical cubicle. English 30/12/2011 231 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist NE, REEVING: 06 English 30/12/2011 232 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 109 FIXED HOIST NE, REEVING: 08 Hoisting speed (m/min) Load kg 32000 40000 Class Fem/ISO 2m/M5 1Am/M4 Hoist dimensions HOL m 7 9 11.5 15 20 24 Motor dimensions Motor M2 (mm) Weight ( kg) E gear High Low 2 0.3 P6/T6 motor P6/T6 motor Length code E F G H J K P6 536 85 F gear High Low 2.5 0.4 P7/T7 motor P7/T7 motor R mm 1780 1780 2290 2290 2699 2699 G gear High Low 3.2 0.5 P8/T8 motor M1 mm 682 832 1022 1272 1622 1922 P7 576 105 G gear High Low 3.2 T8 motor - M3 mm 560 560 640 640 810 810 P8 711 106 T6 536 65 H gear High Low 4 T9 motor T9 motor H1 mm 620 620 700 700 660 660 T7 536 71 H gear High Low 5 TA motor TA motor H2 mm 63 81 105 137 180 217 T8 536 81 Weight kg 1500 1600 1700 1800 2100 2200 T9 536 92 TA 576 106 Trolley dimensions C D1 (∅ ∅) 1096 E1 405 L4 707 18 E2 600 L5 766 E3 126 L8 20 E4 600 L9 60 E5 315 L11 320 E7 435 L12 52 E9 400 M5 44 H3 104.5 M6 218 H4 121.5 H5 832.5 H6 551.5 L1 1384 D006939_A 102576 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: X points the location for an auxiliary electrical cubicle. English 30/12/2011 233 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist NE, REEVING: 08 English 30/12/2011 234 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 110 FIXED HOIST NE, REEVING: 22 Hoisting speed (m/min) Load kg 6300 8000 10000 Class Fem/ISO 3m/M6 2m/M5 1Am/M4 E gear High Low 8 1.3 P6/T6 motor P6/T6 motor P6/T6 motor Hoist dimensions HOL Length m code 16.5 E 22 F 29.5 G 39 H 52 J 63.5 K 77 L 86.5 M 98 N Motor dimensions Motor M2 (mm) Weight ( kg) H1 mm 770 770 770 1070 1070 1095 1095 1370 1370 P6 536 85 P7 576 105 F gear High Low 10 1.7 P6/T6 motor P6/T6 motor P7/T7 motor M1 mm 682 832 1022 1272 1622 1922 2272 2522 2822 P8 711 106 G gear High Low 12.5 2 P7/T7 motor P7/T7 motor P8/T8 motor M3 mm 429 354 259 434 259 134 -40 109 -40 T6 536 65 H gear High Low 16 T8 motor T8 motor T9 motor J gear High Low 20 T9 motor T9 motor TA motor Weight kg 1200 1300 1300 1500 1600 1800 2000 2200 2300 T7 536 71 T8 536 81 T9 536 92 TA 576 106 Trolley dimensions C D1 (∅ ∅) 731 E1 410 L4 707 18 E2 600 L5 766 E3 126 L8 20 E4 600 L9 60 E5 315 L11 260 E7 435 L12 52 E9 400 M5 44 H3 81.5 M6 218 H4 100.5 H5 810 H6 570 L1 1380 D006940_A 102577 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: X points the location for an auxiliary electrical cubicle. English 30/12/2011 235 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist NE, REEVING: 22 English 30/12/2011 236 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 111 FIXED HOIST NE, REEVING: 24 Hoisting speed (m/min) Load kg 12500 16000 20000 E gear High Low 4 0.7 P6/T6 motor P6/T6 motor P6/T6 motor Class Fem/ISO 3m/M6 2m/M5 1Am/M4 Hoist dimensions HOL Length m code 8 E 11 F 14.5 G 19.5 H 26 J 31.5 K 38.5 L 43 M 49 N Motor dimensions Motor M2 (mm) Weight ( kg) P6 536 85 F gear High Low 5 0.8 P6/T6 motor P6/T6 motor P7/T7 motor H1 mm 770 770 770 1070 1070 1095 1095 1370 1370 P7 576 105 M1 mm 682 832 1022 1272 1622 1922 2272 2522 2822 P8 711 106 G gear High Low 6.3 1.1 P7/T7 motor P7/T7 motor P8/T8 motor M3 mm 429 354 259 434 259 134 -40 109 -40 T6 536 65 H gear High Low 8 T8 motor T8 motor T9 motor J gear High Low 10 T9 motor T9 motor TA motor Weight kg 1300 1300 1400 1600 1700 1900 2000 2200 2400 T7 536 71 T8 536 81 T9 536 92 TA 576 106 H4 100.5 H5 810 Trolley dimensions C D1 (∅ ∅) 1040 E1 410 L4 707 18 E2 600 L5 766 E3 126 L8 20 E4 600 L9 60 E5 315 L11 260 E7 435 L12 52 E9 400 M5 44 H3 81.5 M6 218 H6 570 L1 1380 D006941_A 102578 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: X points the location for an auxiliary electrical cubicle. English 30/12/2011 237 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist NE, REEVING: 24 English 30/12/2011 238 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 112 FIXED HOIST NE, REEVING: 26 Hoisting speed (m/min) Load kg 20000 25000 30000 E gear High Low 2.5 0.4 P6/T6 motor P6/T6 motor P6/T6 motor Class Fem/ISO 3m/M6 2m/M5 1Am/M4 Hoist dimensions HOL Length m code 5.5 E 7 F 9.5 G 13 H 17 J 21 K 25.5 L 28.5 M 32.5 N Motor dimensions Motor M2 (mm) Weight ( kg) P6 536 85 F gear High Low 3.2 0.5 P6/T6 motor P6/T6 motor P7/T7 motor H1 mm 770 770 770 1070 1070 1095 1095 1370 1370 P7 576 105 M1 mm 682 832 1022 1272 1622 1922 2272 2522 2822 P8 711 106 G gear High Low 4 0.7 P7/T7 motor P7/T7 motor P8/T8 motor M3 mm 429 354 259 434 259 134 -40 109 -40 T6 536 65 H gear High Low 5 T8 motor T8 motor T9 motor J gear High Low 6.3 T9 motor T9 motor TA motor Weight kg 1400 1400 1500 1700 1800 1900 2100 2300 2400 T7 536 71 T8 536 81 T9 536 92 TA 576 106 H4 100.5 H5 810 Trolley dimensions C D1 (∅ ∅) 1079 E1 410 L4 707 18 E2 600 L5 766 E3 126 L8 20 E4 600 L9 60 E5 315 L11 260 E7 435 L12 52 E9 400 M5 44 H3 81.5 M6 218 H6 570 L1 1380 D006942_A 102579 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: X points the location for an auxiliary electrical cubicle. English 30/12/2011 239 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist NE, REEVING: 26 English 30/12/2011 240 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 113 FIXED HOIST NE, REEVING: 28 Hoisting speed (m/min) Load kg 32000 40000 Class Fem/ISO 2m/M5 1Am/M4 E gear High Low 2 0.3 P6/T6 motor P6/T6 motor Hoist dimensions HOL Length m code 5.5 F 7 G 9.5 H 13 J 15.5 K 19 L 21.5 M 24.5 N Motor dimensions Motor P6 M2 (mm) 536 Weight ( kg) 85 F gear High Low 2.5 0.4 P7/T7 motor P7/T7 motor H1 mm 770 770 1070 1070 1095 1095 1370 1370 P7 576 105 G gear High Low 3.2 0.5 P8/T8 motor M1 mm 832 1022 1272 1622 1922 2272 2522 2822 P8 711 106 M3 mm 354 259 434 259 134 -40 109 -40 T6 536 65 G gear High Low 3.2 T8 motor - H gear High Low 4 T9 motor T9 motor H gear High Low 5 TA motor TA motor Weight kg 1500 1600 1800 1900 2100 2200 2400 2600 T7 536 71 T8 536 81 T9 536 92 TA 576 106 H4 100.5 H5 810 Trolley dimensions C D1 (∅ ∅) 1206 E1 410 L4 707 18 E2 600 L5 766 E3 126 L8 20 E4 600 L9 60 E5 315 L11 260 E7 435 L12 52 E9 400 M5 44 H3 81.5 M6 218 H6 570 L1 1380 D006943_A 102580 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: X points the location for an auxiliary electrical cubicle. English 30/12/2011 241 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist NE, REEVING: 28 English 30/12/2011 242 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 114 FIXED HOIST NF, REEVING: 22 Hoisting speed (m/min) Load kg 12500 16000 20000 Class Fem/ISO 3m/M6 2m/M5 1Am/M4 E gear High Low 8 1.2 P6/T6 motor P6/T6 motor P6/T6 motor Hoist dimensions HOL m 15.5 20.5 27.5 37.5 46 55.5 62.5 71 Length code F G H J K L M N Motor dimensions Motor M2 (mm) Weight ( kg) P6 536 85 F gear High Low 10 1.6 P6/T6 motor P6/T6 motor P7/T7 motor R mm 1700 1700 2400 2400 3100 3100 3800 3800 G gear High Low 12.5 P7/T7 motor P7/T7 motor T8 motor M1 mm 832 1022 1272 1622 1922 2272 2522 2822 P7 576 105 M3 mm 434 339 565 389 339 414 840 690 T6 536 65 T7 536 71 H gear High Low 16 T8 motor T8 motor T9 motor J gear High Low 20 T9 motor T9 motor - Weight kg 1400 1500 1600 1800 2000 2200 2400 2600 T8 536 81 T9 536 92 Trolley dimensions C D1 (∅ ∅) 918 E1 488 L1 1773 18 E2 600 L2 92 E3 122 L4 707 E4 600 L5 731.5 E5 305 L8 57 E6 81 L9 70 E9 400 L10 35 E10 586 L11 540 H3 255 L12 272 H4 355 M5 44 H5 833 M6 218 H6 940.5 D006944_A 102581 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: The larger electrical cubicle is required with motor P7. English 30/12/2011 243 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist NF, REEVING: 22 English 30/12/2011 244 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 115 FIXED HOIST NF, REEVING: 24 Hoisting speed (m/min) Load kg 25000 32000 40000 Class Fem/ISO 3m/M6 2m/M5 1Am/M4 E gear High Low 4 0.6 P6/T6 motor P6/T6 motor P6/T6 motor Hoist dimensions HOL m 7.5 10 13.5 18.5 23 27.5 31 35.5 Length code F G H J K L M N Motor dimensions Motor M2 (mm) Weight ( kg) P6 536 85 F gear High Low 5 0.8 P6/T6 motor P6/T6 motor P7/T7 motor R mm 1700 1700 2400 2400 3100 3100 3800 3800 P7 576 105 G gear High Low 6.3 1 P7/T7 motor P7/T7 motor T8 motor M1 mm 832 1022 1272 1622 1922 2272 2522 2822 M3 mm 434 339 565 389 339 414 840 690 T6 536 65 T7 536 71 H gear High Low 8 T8 motor T8 motor T9 motor J gear High Low 10 T9 motor T9 motor - Weight kg 1500 1500 1700 1800 2100 2200 2500 2600 T8 536 81 T9 536 92 Trolley dimensions C D1(∅ ∅) 1263 E1 488 L1 1773 18 E2 600 L2 92 E3 122 L4 707 E4 600 L5 731.5 E5 305 L8 57 E6 81 L9 70 E9 400 L10 35 E10 586 L11 540 H3 255 L12 272 H4 355 M5 44 H5 833 M6 218 H6 940.5 D006945_A 102582 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: The larger electrical cubicle is required with motor P7. English 30/12/2011 245 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist NF, REEVING: 24 English 30/12/2011 246 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 116 FIXED HOIST NF, REEVING: 26 Hoisting speed (m/min) Load kg 40000 50000 60000 E gear High Low 2.5 0.4 P6/T6 motor P6/T6 motor P6/T6 motor Class Fem/ISO 3m/M6 2m/M5 1Am/M4 Hoist dimensions HOL m 5 6.5 9 12.5 15 18.5 20.5 23.5 Length code F G H J K L M N Motor dimensions Motor M2 (mm) Weight ( kg) P6 536 85 F gear High Low 3.2 0.5 P6/T6 motor P6/T6 motor P7/T7 motor R mm 1700 1700 2400 2400 3100 3100 3800 3800 P7 576 105 G gear High Low 4 0.6 P7/T7 motor P7/T7 motor T8 motor M1 mm 832 1022 1272 1622 1922 2272 2522 2822 M3 mm 434 339 565 389 339 414 840 690 T6 536 65 T7 536 71 H gear High Low 5 T8 motor T8 motor T9 motor J gear High Low 6.3 T9 motor T9 motor - Weight kg 1600 1700 1900 2000 2400 2600 3000 3100 T8 536 81 T9 536 92 Trolley dimensions C D1 (∅ ∅) 1339 E1 488 L1 1773 18 E2 600 L2 92 E3 122 L4 707 E4 600 L5 732 E5 305 L8 57 E6 81 L9 70 E9 400 L10 35 E10 586 L11 540 H3 255 L12 330 H4 355 M5 44 H5 833 M6 218 H6 940.5 D006946_A 102583 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: The larger electrical cubicle is required with motor P7. English 30/12/2011 247 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist NF, REEVING: 26 English 30/12/2011 248 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 117 FIXED HOIST NF, REEVING: 28 Hoisting speed (m/min) Load kg 63000 80000 E gear High Low 2 0.3 P6/T6 motor P6/T6 motor Class Fem/ISO 2m/M5 1Am/M4 Hoist dimensions HOL m 6.5 9 11 13.5 15.5 17.5 Length code H J K L M N Motor dimensions Motor M2 (mm) Weight ( kg) P6 536 85 F gear High Low 2.5 0.4 P6/T6 motor P7/T7 motor R mm 2400 2400 3100 3100 3800 3800 G gear High Low 3.2 0.5 P7/T7 motor T8 motor M1 mm 1272 1622 1922 2272 2522 2822 P7 576 105 M3 mm 565 389 339 414 840 690 T6 536 65 T7 536 71 H gear High Low 4 T8 motor T9 motor J gear High Low 5 T9 motor - Weight kg 2000 2200 2600 2700 3100 3200 T8 536 81 T9 536 92 Trolley dimensions C D1 (∅ ∅) 1430 E1 488 L1 1773 18 E2 600 L2 92 E3 122 L4 707 E4 600 L5 732 E5 305 L8 57 E6 81 L9 70 E9 400 L10 35 E10 586 L11 540 H3 255 L12 330 H4 355 M5 44 H5 833 M6 218 H6 940.5 D006947_A 102584 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: The larger electrical cubicle is required with motor P7. English 30/12/2011 249 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist NF, REEVING: 28 English 30/12/2011 250 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS SPECIAL LOW HEADROOM HOIST English 30/12/2011 251 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS English 30/12/2011 252 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 118 SPECIAL LOW HEADROOM HOIST NB, REEVING: 04 Hoisting speed (m/min) Load Class kg 2800 JIS C 3200 ISO M5 G gear + O2 motor Single speed 6.3 6.3 Hoist dimensions HOL Length m code 6 A 9 C Trolley dimensions Min B Max B 75 L1 436.5 L13 18 300 L2 426 L14 442 M2 mm 318 448 C 608 L3 155 L15 25 D1 (∅ ∅) 80 L4 142.6 L16 520 G gear + P2 motor High Low 6.3 1.1 6.3 1.1 M1 mm 284 414 D2 (∅ ∅) 40 L5 115.4 L17 569 L17 mm 569 679 L6 142 Weight kg 240 260 L7 99.5 L8 142.5 L9 128.7 L10 76 L11 11.5 L12 114 D004646_A 062492 Note: All dimensions in mm. English 30/12/2011 253 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Special Low Headroom Hoist NB, REEVING: 04 Note 1: Adjust the position of the hoisting upper limit lever so that the end of it is in the middle of track beam. Tolerance ±12mm. Note 2: Location of 1-speed or inverter travelling motor connection box. Note 3: Location of 2-speed travelling motor connection box. Note 4: Location of M8 threaded holes for towing arm and for travelling limit switch. Spacing 76mm x 76mm. Note 5: Buffer position for brand M. Note 6: Buffer position for other brands. English 30/12/2011 254 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS MACHINERY HOIST English 30/12/2011 255 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS English 30/12/2011 256 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 119 MACHINERY HOIST NBM1V, REEVING: M1 Hoisting speed (m/min) Load Class kg Fem/ISO 400 3m/M6 500 2m/M5 600 3m/M6 800 2m/M5 F gear + P1/T1 motor High Low 20 3.3 20 3.3 - Hoist dimensions HOL Length m code 24 A 38 C Motor dimensions Motor P1 M2 (mm) 498 Weight ( kg) 21 M1 mm 431 561 P2 558 31 F gear + P2/T2 motor High Low 20 3.3 20 3.3 20 3.3 20 3.3 H1 mm 182 288 P3 588 35 T1 mm 270 400 T1 498 22 G gear + P2/T2 motor High Low 25 4.2 25 4.2 25 4.2 25 4.2 T3 mm 318 448 T2 498 22 H gear + P3/T3 motor High Low 32 5.3 32 5.3 32 5.3 32 5.3 Weight kg 95 105 T3 498 22 Trolley dimensions D1 (∅ ∅) 303 D2 (∅ ∅) 6.4 D3 (∅ ∅) 14 L1 L2 L3 L4 L5 L6 L7 L8 L9 380 249 386 24 28 40 300 291 631 D002083_A 062495 Note: All dimensions in mm. Note: Weight calculated with P1 motor. Note: Max rope angle from drum groove +/- 4 degrees. English 30/12/2011 257 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Machinery Hoist NBM1V, REEVING: M1 English 30/12/2011 258 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 120 MACHINERY HOIST NBM2V, REEVING: M2, ROPES TO SAME DIRECTION Hoisting speed (m/min) Load Class kg Fem/ISO 400 3m/M6 500 2m/M5 600 3m/M6 800 2m/M5 F gear + P1/T1 motor High Low 20 3.3 20 3.3 - Hoist dimensions HOL Length m code 7 A 15 C Motor dimensions Motor P1 M2 (mm) 498 Weight ( kg) 21 M1 mm 431 561 P2 558 31 F gear + P2/T2 motor High Low 20 3.3 20 3.3 20 3.3 20 3.3 H1 mm 53 118 P3 588 35 T1 mm 270 400 T1 498 22 G gear + P2/T2 motor High Low 25 4.2 25 4.2 25 4.2 25 4.2 T3 mm 318 448 T2 498 22 H gear + P3/T3 motor High Low 32 5.3 32 5.3 32 5.3 32 5.3 Weight kg 95 105 T3 498 22 Trolley dimensions D1 (∅ ∅) 303 L1 629 D2 (∅ ∅) 6.7 L2 380 D3 (∅ ∅) 14 L3 249 L4 386 L5 24 L6 74 L7 28 L8 40 L9 300 L10 291 D002085_A 062496 Note: All dimensions in mm. Note: Weight calculated with P1 motor. Note: Rope 1 closer to the gearbox. Note: max rope angle from drum groove +/- 4 degrees. English 30/12/2011 259 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Machinery Hoist NBM2V, REEVING: M2 , Ropes To Same Direction Note 1: Electric cubicle optional position and transport position. English 30/12/2011 260 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 121 MACHINERY HOIST NBM2V, REEVING: M2, ROPES TO OPPOSITE DIRECTIONS Hoisting speed (m/min) Load Class kg Fem/ISO 400 3m/M6 500 2m/M5 600 3m/M6 800 2m/M5 F gear + P1/T1 motor High Low 20 3.3 20 3.3 - Hoist dimensions HOL Length m code 7 A 15 C Motor dimensions Motor M2 (mm) Weight ( kg) M1 mm 431 561 P1 498 21 H1 mm 53 118 P2 558 31 F gear + P2/T2 motor High Low 20 3.3 20 3.3 20 3.3 20 3.3 T1 mm 270 400 P3 588 35 G gear + P2/T2 motor High Low 25 4.2 25 4.2 25 4.2 25 4.2 T3 mm 318 448 T1 498 22 H gear + P3/T3 motor High Low 32 5.3 32 5.3 32 5.3 32 5.3 Weight kg 95 105 T2 498 22 T3 498 22 Trolley dimensions D1 (∅ ∅) 303 L1 629 D2 (∅ ∅) 6.4 L2 380 D3 (∅ ∅) 14 L3 249 L4 380 L5 386 L6 40 L7 300 L8 24 L9 74 L10 28 L11 307 D002084_A 062561 Note: All dimensions in mm. Note: Weight calculated with P1 motor. Note: Both ropes within the allowed rope angle! Note: Max rope angle from drum groove +/- 4 degrees. English 30/12/2011 261 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Machinery Hoist NBM2V, REEVING: M2, Ropes To Opposite Directions Note 1: Electric cubicle optional position and transport position. English 30/12/2011 262 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 122 MACHINERY HOIST NCM1V, REEVING: M1 Hoisting speed (m/min) Load Class kg Fem/ISO 1000 3m/M6 1250 2m/M5 1600 1Am/M4 Hoist dimensions HOL Length m code 24 B 36 C 48 D 62 E Motor dimensions Motor M2 (mm) Weight ( kg) E gear + P3/T3 motor High Low 16 2.7 16 2.7 16 2.7 M1 mm 467 567 667 787 P3 597 35 H1 mm 196 292 392 506 P4 690 53 T3 507 22 F gear + P3/T3 motor High Low 20 3.3 20 3.3 - T1 mm 300 400 500 620 T3 mm 350 450 550 670 H gear + P4/T4 motor High Low 32 5.3 32 5.3 - Weight kg 140 150 160 170 T4 610 45 Trolley dimensions D1 (∅ ∅) 355 L1 435 D2 (∅ ∅) 8 L2 251 D3 (∅ ∅) 18 L3 456 L4 40 L5 25 L6 42.5 L7 350 L8 294 L9 686 D002108_A 062500 Note: All dimensions in mm. Note: Weight calculated with P3 motor. Note: Max rope angle from drum groove +/- 4 degrees. English 30/12/2011 263 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Machinery Hoist NCM1V, REEVING: M1 English 30/12/2011 264 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 123 MACHINERY HOIST NCM2V, REEVING: M2, ROPES TO SAME DIRECTION Hoisting speed (m/min) Load Class kg Fem/ISO 1000 3m/M6 1250 2m/M5 1600 1Am/M4 Hoist dimensions HOL Length m code 9.5 B 17 C 25 D 34 E Motor dimensions Motor M2 (mm) Weight ( kg) E gear + P3/T3 motor High Low 16 2.7 16 2.7 16 2.7 M1 mm 467 567 667 787 P3 597 35 H1 mm 62 112 162 222 P4 690 53 T3 507 22 F gear + P3/T3 motor High Low 20 3.3 20 3.3 - T1 mm 300 400 500 620 T3 mm 350 450 550 670 H gear + P4/T4 motor High Low 32 5.3 32 5.3 - Weight kg 140 150 160 170 T4 610 45 Trolley dimensions D1 (∅ ∅) 355 L1 707 D2 (∅ ∅) 6.4 L2 435 D3 (∅ ∅) 18 L3 251 L4 456 L5 40 L6 80 L7 25 L8 42.5 L9 350 L10 294 D002110_A 062505 Note: All dimensions in mm. Note: Weight calculated with P3 motor. Note: Max rope angle from drum groove +/- 4 degrees. Note: Drum groove var. 4. English 30/12/2011 265 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Machinery Hoist NCM2V, REEVING: M2, Ropes To Same Direction English 30/12/2011 266 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 124 MACHINERY HOIST NCM2V, REEVING: M2, ROPES TO OPPOSITE DIRECTIONS Hoisting speed (m/min) Load Class kg Fem/ISO 1000 3m/M6 1250 2m/M5 1600 1Am/M4 E gear + P3/T3 motor High Low 16 2.7 16 2.7 16 2.7 Hoist dimensions HOL Length m code 9.5 B 17 C 25 D 34 E M1 mm 467 567 667 787 Motor dimensions Motor P3 M2 (mm) 597 Weight ( kg) 35 P4 690 53 H1 mm 62 112 162 222 T3 507 22 F gear + P3/T3 motor High Low 20 3.3 20 3.3 - T1 mm 300 400 500 620 T3 mm 350 450 550 670 H gear + P4/T4 motor High Low 32 5.3 32 5.3 - Weight kg 140 150 160 170 T4 610 45 Trolley dimensions D1 (∅ ∅) 355 L1 705 D2 (∅ ∅) 6.4 L2 435 D3 (∅ ∅) 18 L3 251 L4 456 L5 25 L6 42.5 L7 350 L8 80 L9 40 L10 308 D002109_A 062501 Note: All dimensions in mm. Note: Weight calculated with P3 motor. Note: Max rope angle from drum groove +/- 4 degrees. Note: Rope 1 closer to the gearbox. English 30/12/2011 267 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Machinery Hoist NCM2V, REEVING: M2, Ropes To Opposite Directions English 30/12/2011 268 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 125 MACHINERY HOIST NDM1V, REEVING: M1 Hoisting speed (m/min) Load Class kg Fem/ISO 2000 3m/M6 2500 2m/M5 3150 1Am/M4 E gear + P5/T5 motor High Low 16 2.7 16 2.7 16 2.7 Hoist dimensions HOL Length m code 36 D 48 E 64 F 82 G Motor dimensions Motor M1 (mm) Weight ( kg) M2 mm 697 817 967 1157 P5 722 58 F gear + P5/T5 motor High Low 20 3.3 20 3.3 - H1 mm 352 472 622 812 P6 722 85 T1 mm 490 610 760 950 P7 762 105 H gear + P6/T6 motor High Low 32 5.3 32 5.3 - T3 mm 552 672 822 1012 T5 642 45 J gear + P7/T7 motor High Low 40 6.7 40 6.7 - Weight kg 315 330 350 370 T6 722 65 T7 722 71 Trolley dimensions D1 (∅ ∅) 406 D2 (∅ ∅) 11 D3 (∅ ∅) 22 L1 L2 L3 L4 L5 L6 L7 L8 L9 847 541 400 515 177 54 57.5 400 388 D002138_A 062940 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Max rope angle from drum groove +/- 4 degrees. English 30/12/2011 269 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Machinery Hoist NDM1V, REEVING: M1 English 30/12/2011 270 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 126 MACHINERY HOIST NDM2V, REEVING: M2, ROPES TO SAME DIRECTION Hoisting speed (m/min) Load Class kg Fem/ISO 2000 3m/M6 2500 2m/M5 3150 1Am/M4 E gear + P5/T5 motor High Low 16 2.7 16 2.7 16 2.7 Hoist dimensions HOL Length m code 18 D 27 E 38 F 50 G Motor dimensions Motor M1 (mm) Weight ( kg) M2 mm 698 818 968 1158 P5 728 58 F gear + P5/T5 motor High Low 20 3.3 20 3.3 - H1 mm 128 188 263 358 P6 722 85 T1 mm 490 610 760 950 P7 762 105 H gear + P6/T6 motor High Low 32 5.3 32 5.3 - T3 mm 552 672 822 1012 T5 728 45 J gear + P7/T7 motor High Low 40 6.7 40 6.7 - Weight kg 315 330 350 370 T6 722 65 T7 722 71 Trolley dimensions D1 (∅ ∅) 406 L1 515 D2 (∅ ∅) 22 L2 332 D3 (∅ ∅) 8 L3 541 L4 99 L5 31 L6 57.5 L7 400 L8 388 L9 530 L10 177 D002137_A 062942 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Max rope angle from drum groove +/- 4 degrees. English 30/12/2011 271 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Machinery Hoist NDM2V, REEVING: M2, Ropes To Same Direction English 30/12/2011 272 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 127 MACHINERY HOIST NDM2V, REEVING: M2, ROPES TO OPPOSITE DIRECTIONS Hoisting speed (m/min) Load Class kg Fem/ISO 2000 3m/M6 2500 2m/M5 3150 1Am/M4 E gear + P5/T5 motor High Low 16 2.7 16 2.7 16 2.7 Hoist dimensions HOL Length m code 18 D 27 E 38 F 50 G Motor dimensions Motor M1 (mm) Weight ( kg) M2 mm 698 818 968 1158 P5 722 58 F gear + P5/T5 motor High Low 20 3.3 20 3.3 - H1 mm 128 188 263 358 P6 722 85 T1 mm 490 610 760 950 P7 762 105 H gear + P6/T6 motor High Low 32 5.3 32 5.3 - T3 mm 552 672 822 1012 T5 642 45 J gear + P7/T7 motor High Low 40 6.7 40 6.7 - Weight kg 315 330 350 370 T6 722 65 T7 722 71 Trolley dimensions D1 (∅ ∅) 406 L1 515 D2 (∅ ∅) 22 L2 332 D3 (∅ ∅) 8 L3 541 L4 31 L5 57.5 L6 400 L7 388 L8 99 L9 65 L10 530 L11 177 D002139_A 062943 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Rope 1 closer to the gearbox. Note: Max rope angle from drum groove +/- 4 degrees. English 30/12/2011 273 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Machinery Hoist NDM2V, REEVING: M2, Ropes To Opposite Directions English 30/12/2011 274 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 128 MACHINERY HOIST NEM1V, REEVING: M1 Hoisting speed (m/min) Load kg 3200 4000 5000 E gear High Low 16 2.7 P6/T6 motor P6/T6 motor P6/T6 motor Class Fem/ISO 3m/M6 2m/M5 1Am/M4 Hoist dimensions HOL m 32 43 56.5 73 94.5 122.5 161.5 195 Motor dimensions Motor M2 (mm) Weight ( kg) Length code C D E F G H J K P6 536 85 F gear High Low 20 3.3 P6/T6 motor P6/T6 motor P7/T7 motor H2 mm 286 385 506 654 846 1097 1446 1746 P7 576 105 G gear High Low 25 4.2 P7/T7 motor P7/T7 motor P8/T8 motor T1 mm 400 500 620 770 960 1210 1560 1860 P8 711 106 T6 536 65 H gear High Low 32 T8 motor T8 motor T9 motor T3 mm 466 566 686 836 1026 1276 1626 1926 T7 536 71 T8 536 81 J gear High Low 40 T9 motor T9 motor TA motor Weight kg 600 630 660 700 740 810 900 980 T9 536 92 TA 576 106 L9 70 L10 800 Trolley dimensions D1 (∅ ∅) 608 L1 1034 D2 (∅ ∅) 21 L2 800 L3 600 L4 60 L5 60 L6 60 L7 60 L8 660 L11 218 L12 33 D002433_A 063844 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: Max rope angle from drum groove +/- 4 degrees. English 30/12/2011 275 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Machinery Hoist NEM1V, REEVING: M1 English 30/12/2011 276 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 129 MACHINERY HOIST NEM2V, REEVING: M2 Hoisting speed (m/min) Load kg 3200 4000 5000 E gear High Low 16 2.7 P6/T6 motor P6/T6 motor P6/T6 motor Class Fem/ISO 3m/M6 2m/M5 1Am/M4 Hoist dimensions HOL m 37 48.5 63 82 108.5 131.5 158.5 177.5 200.5 Motor dimensions Motor M2 (mm) Weight ( kg) Length code E F G H J K L M N P6 536 85 F gear High Low 20 3.3 P6/T6 motor P6/T6 motor P7/T7 motor H2 mm 242 317 412 537 710 861 1037 1162 1312 P7 576 105 G gear High Low 25 4.2 P7/T7 motor P7/T7 motor P8/T8 motor T1 mm 620 770 960 1210 1560 1860 2210 2460 2760 P8 711 106 T6 536 65 H gear High Low 32 T8 motor T8 motor T9 motor T3 mm 686 836 1026 1276 1626 1926 2276 2526 2826 T7 536 71 T8 536 81 J gear High Low 40 T9 motor T9 motor TA motor Weight kg 660 700 740 810 900 980 1070 1140 1220 T9 536 92 TA 576 106 Trolley dimensions D1 (∅ ∅) 608 L1 1034 L13 33 D2 (∅ ∅) 11 L2 800 D3 (∅ ∅) 21 L3 600 L4 60 L5 60 L6 60 L7 60 L8 70 L9 660 L10 800 L11 218 L12 30 D002411_A 063845 Note: Weight calculated with P6 motor. Note: All dimensions in mm. Note: Angle of rope 2 can variate 0-360 degrees. Note: Max rope angle from drum groove +/- 4 degrees. English 30/12/2011 277 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Machinery Hoist NEM2V, REEVING: M2 English 30/12/2011 278 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 130 HOOK 130.1 Hook block dimensions c_hbdim1b Hoist frame Rope falls Z 02 M5 RSN1 V 1 385 84 261 168 108 9.3 Z 04 M5 RSN1.6 V 3 391 84 258 168 202 16.2 B 02 M5 M6 RSN 1 V 1 385 84 261 168 108 9.3 B 04 M5 M6 HBC 1.6 V 2 337 84 198 168 221 13 C 02 M5 M6 RSN 1 V 1 425 102 282 204 118 14 C 04 M5 M6 HBC 2.5 V 2 426 102 259 204 270 22 C 04 HBC 2.5 V 3 443 102 276 204 241 31.5 C 06 HBC 2.5 V 4 499 110 324 220 165 37 C 08 M4 M5 HBC 2.5 V 4 499 110 324 220 165 40 D 02 X (M4) M5 M6 HBC 2.5 V 1 578 142 371 283 148 31 D 04 M5 M6 HBC 5 V 2 548 142 316 283 376 46.5 D 04 HBC 5 V 3 604 142 372 283 341 77.5 D 06 M5 M6 HBC 5 V 4 687 150 447 300 220 88 D 08 HBC 5 V 4 687 150 447 300 220 95 D 22 M5 M6 HBC 2.5 V 4 499 110 324 220 165 29 D 24 M5 M6 HBC 5 V 5 608 110 408 220 220 67 D 26 M5 M6 RSN 6 V 5 644 110 448 220 286 80 D 28 M4 M5 RSN 6 V 5 644 110 448 220 344 88 E 02 M4 M5 M6 HBC 5 V 9 830 205 535 410 244 98 E 04 M4 M5 M6 HBC 5 V 9 830 205 535 410 244 111 English 1Am/M4 X (M4) Hoist duty 2m/M5 3m/M6 X (M4) M5 M6 X (M4) M4 M5 Hook forging Fig. H 30/12/2011 Hook block dimensions (mm) H1 H2 D B Weight (kg) 279 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Hoist frame Rope falls 1Am/M4 Hoist duty 2m/M5 3m/M6 E 06 M4 M5 E 08 M4 M5 E 22 M4 M5 E 24 M4 E 26 E 28 F F M6 Hook forging Fig. H Hook block dimensions (mm) H1 H2 D B Weight (kg) RSN10 T 8 965 205 655 410 282 181 RSN 16 T 8 1119 205 780 410 294 236 M6 HBC 5 V 9 740 155 495 310 243 78 M5 M6 RSN 6 V 7 719 160 473 700 275 143 M4 M5 M6 M4 M5 22 M4 M5 M6 RSN 6 V 24 M4 M5 M6 RSN 16 T F 26 M4 M5 M6 RSN 20 T F 28 M4 M5 RSN 25 T RSN10 T 7 830 160 564 700 282 192 RSN 16 T 7 974 160 680 700 294 299 8 844 205 553 410 244 114 7 1034 200 700 910 377 332 7 1118 200 766 910 377 495 7 1219 200 847 910 377 603 B Weight (kg) 86 130.2 New hook blocks to be released in 2012 Please check availability from factory. Hoist frame Rope falls D 06 D 08 D 22 M5 D 24 D 26 D 28 English 1Am/M4 Hoist duty 2m/M5 3m/M6 Hook forging Fig. HBC 5 V 1 740 155 495 310 243 HBC 5 V 1 740 155 495 310 243 91 M6 HBC 2.5 V 1 541 115 361 230 203 37 M5 M6 RSN 6 V 2 639 120 433 530 243 100 M5 M6 RSN 6 V 2 639 120 433 530 243 104 RSN 6 V 2 639 120 433 530 243 110 M5 M4 M4 M6 M5 M5 H 30/12/2011 Hook block dimensions (mm) H1 H2 D 280 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 130.3 Hook forging dimensions d1 d1 A b4 f1 Ba ll r l1 l1 g1 a2 ll r2 b2 B a3 a1 E a3 e3 a2 g1 B 2 e3 Ba b1 f1 C D h2 h2 b3 b2 h1 D h3 b1 b3 a1 h4 E c_hb1b RSN a1 a2 a3 b1 b2 b3 b4 d1 e3 f1 g1 h1 h2 h3 h4 l1 r2 weight (forging) kg HBC RSN 1 RSN 1.6 RSN 2.5 RSN 4 RSN RSN 5 RSN 6 RSN 10 RSN 16 RSN 20 HBC RSN 25 HBC 1.6 HBC 2.5 HBC 5 50 + 3 56 + 3 63 + 3 71 + 4 80 + 4 90 + 5 112 + 6 140 + 6 160 + 8 180 + 8 56 + 3 63 + 3 80 + 3 40 + 3 45 + 3 50 + 3 56 + 4 63 + 4 71 + 5 90 + 6 112 + 6 125 + 8 140 + 8 45 + 3 51 + 3 63 + 3 57 + 3 64 + 3 72 + 3 80 + 4 90 + 4 101 + 5 127 + 6 160 + 6 180 + 8 202 + 8 60 + 3 65 + 3 84 + 3 38 + 3 45 + 3 53 + 3 63 + 4 71 + 4 80 + 5 100 + 6 125 + 6 140 + 8 160 + 8 46 + 3 52 + 3 75 + 3 32 + 3 38 + 3 45 + 3 53 + 4 60 + 4 67 + 5 85 6 106 + 6 118 + 8 132 + 8 40 + 3 44 + 3 64 + 3 + + + + + + + + + + + 32 + 3 37 + 3 59 + 3 + + + + + + + + + + 32 + 3 37 + 3 45 + 2 30 + 3 36 + 3 42 + 3 48 + 4 53 105 + 3 118 + 3 132 + 3 148 + 4 31 + 1 35 + 1 40 + 1 45 + 12.5 + 1 14 + 1 16 + 1 16 48 + 3 56 + 3 67 + 3 40 + 3 48 + 3 58 + 3 + 4 60 + 5 75 + 6 95 + 6 106 + 8 118 + 8 38 + 3 44 + 3 55 + 3 165 + 4 185 + 5 221 + 6 280 + 6 330 + 8 360 + 8 105 + 3 118 + 3 148 + 3 2 51 + 2 57 + 2 46 + 3 58 + 3 68 + 3 74 + 3 40 + 1 45 + 2 56 + 2 + 2 18 + 2 18 + 2 23 + 3 33 + 3 33 + 3 38 + 3 14 + 1 16 + 1 18 + 2 80 + 4 90 + 4 100 + 5 125 + 6 160 + 6 180 + 8 200 + 8 67 + 4 75 + 4 85 5 106 + 6 132 + 6 150 + 8 170 + 8 + + + + 56 + 3 65 + 3 90 + 4 + + + + + + + + + + 76 + 3 85 + 3 112 + 4 + + + + + + + + + + 84 + 3 100 + 3 130 + 4 197 + 3 224 + 3 253 + 3 285 + 4 318 + 4 380 + 5 452 + 6 582 + 6 653 + 8 724 + 8 199 + 3 260 + 3 300 + 4 50 + 3 56 + 3 63 + 3 71 4 90 90 5 112 + 6 140 + 6 160 + 8 180 + 8 56 3 63 3 80 4 3.2 4.5 6.3 + 8.8 + 4 12.3 + 17.1 34 66 95 136 + 5.1 + 8 + 15 Note: Safety latch on HBC forging decreases dimension a2 about 5 mm and about 15 mm on RSN forging. Note: The ‘+ number’ after the nominal dimension indicates the tolerance. For example 160+6 means that the actual dimension is between 160 - 166 mm. Hook forging standard Dimension standard Material standard English RSN DIN 15401 DIN 15400 30/12/2011 HBC DIN 15401 when applicable DIN 15400 281 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS B 131 DRUM AND ROPE SHEAVE DIAMETERS D Nominal diameter C A Rope sheave diameters Rope diameter Duty class A B C D (nominal, mm) (nominal, mm) FEM / ISO (mm) (mm) (mm) (mm) 146 6.4 3m / ISO M6 22 / 22 3.3 18 40 180 8 3m / ISO M6 26 / 26 4.2 20 50 248 11 3m / ISO M6 32 / 38 5.8 23 65 288 11 4m / ISO M7 32 / 48 5.8 33 65 338 15 3m / ISO M6 40 / 46 8 28 85 15 4m / ISO M7 40 / 59 8 41 85 (1) (1) 398 1) Standard as center wheels on some true-vertical lift hooks. Frame size code Z B C D D E E F English Rope diameter (mm) 6.2 6.4 8 11 8 15 11 15 Reeving Standard Standard Standard Standard True vertical Standard True vertical True vertical Rope drum diameter (nominal, (mm)) 243 303 355 406 406 608 608 608 Rope drum pitch (mm) 30/12/2011 7 7.2 9.1 12.5 9.1 17.1 12.5 17.1 Rope sheave diameter (nominal, mm) 146 146 180 248 180 338 248 and 288 338 and 398 Number of rope clamps on drum 2 2 3 4 2x3 6 2x4 2x6 282 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS PRODUCTS TO BE PHASED OUT IN 2012 English 30/12/2011 283 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS English 30/12/2011 284 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 132 DOUBLE GIRDER HOIST ND, REEVING: 06 Hoisting speed (m/min) Load Class kg Fem/ISO 12000 3m/M6 15000 2m/M5 F gear + P5/T5 motor High Low 3.2 0.5 3.2 0.5 Hoist dimensions HOL Length m code 6 D 8 E 10 F 13 G M1 mm 682 802 952 1142 Motor dimensions Motor P5 M3 (mm) 722 Weight ( kg) 58 P6 722 85 M2 mm 480 630 770 970 P7 762 105 H gear + P6/T6 motor High Low 5 0.8 5 0.8 H1 mm 657 807 952 1152 T5 642 45 H2 mm 53 78 98 132 T6 722 65 J gear + P7/T7 motor High Low 6.3 1.1 6.3 1.1 L7 mm 73 73 73 73 L7* mm 93 93 93 93 Min R mm 1400 1700 2000 2400 Weight kg 775 820 855 885 T7 722 71 Trolley dimensions C 699 L1 470 L14 715 D1 (∅ ∅) 140 L2 382 L15 663 D2 (∅ ∅) 170 L3 400 L16 163 D3 (∅ ∅) 63 L4 18 L17 103 WB 1000 L5 100 L18 900 WW min 50 L6 230 L19 163 WW max 85 L8 1326 L20 255 L9 510 L10 428 L11 100 L12 500 L13 500 D002124_A 005023 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1400, 1700, 2000 and 2400. * Please, disregard the dimension L7*. English 30/12/2011 285 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist ND, REEVING: 06 English 30/12/2011 286 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 133 DOUBLE GIRDER HOIST ND, REEVING: 08 Hoisting speed (m/min) Load Class kg Fem/ISO 16000 2m/M5 20000 1Am/M4 F gear + P5/T5 motor High Low 2.5 0.4 2.5 0.4 Hoist dimensions HOL Length m code 4.5 D 6 E 8 F 10 G M1 mm 682 802 952 1142 Motor dimensions Motor P5 M3 (mm) 722 Weight ( kg) 58 P6 722 85 M2 mm 480 630 770 970 P7 762 105 H gear + P6/T6 motor High Low 4 0.7 4 0.7 H1 mm 668 818 948 1148 T5 642 45 H2 mm 44 53 76 98 T6 722 65 J gear + P7/T7 motor High Low 5 0.8 5 0.8 L7 mm 73 73 73 73 L7* mm 93 93 93 93 Min R mm 1400 1700 2000 2400 Weight kg 780 825 860 890 T7 722 71 Trolley dimensions C 865 L1 470 L14 715 D1 (∅ ∅) 140 L2 382 L15 663 D2 (∅ ∅) 170 L3 400 L16 163 D3 (∅ ∅) 63 L4 18 L17 103 WB 1000 L5 100 L18 900 WW min 50 L6 230 L19 255 WW max 85 L8 1326 L20 163 L9 510 L10 423 L11 100 L12 500 L13 500 D002127_A 005026 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1400, 1700, 2000 and 2400. * Please, disregard the dimension L7*. English 30/12/2011 287 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist ND, REEVING: 08 English 30/12/2011 288 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 134 DOUBLE GIRDER HOIST ND, REEVING: 22 Hoisting speed (m/min) Load Class kg Fem/ISO 4000 3m/M6 5000 2m/M5 Hoist dimensions HOL Length m code 8.5 D 13 E 18 F 25 G 33.5 H 46 J Motor dimensions Motor P5 M4 (mm) 722 Weight ( kg) 58 F gear + P5/T5 motor High Low 10 1.7 10 1.7 M1 mm 697 817 967 1157 1407 1757 P6 722 85 H gear + P6/T6 motor High Low 16 2.7 16 2.7 M3 mm 279 217 292 197 255 280 P7 762 105 H1 mm 705 705 855 855 1036 1236 T5 642 45 L7 mm 43 43 43 43 43 43 T6 722 65 J gear + P7/T7 motor High Low 20 3.3 20 3.3 L7* mm 63 63 63 63 63 63 Min R mm 1400 1400 1700 1700 2000 2400 Weight kg 720 780 790 850 880 985 T7 722 71 Trolley dimensions C 735 L1 382 L14 636 D1 (∅ ∅) 110 L2 430 L15 660 D2 (∅ ∅) 140 L3 400 L16 148 D3 (∅ ∅) 63 L4 15 L17 88 M2 128 L5 98 L18 900 WB 1000 L6 320 L19 148 WW min 50 L8 1296 L20 255 WW max 85 L9 510 L10 420 L11 100 L12 488 L13 512 D002134_A 005028 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1400, 1700, 2000 and 2400. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension L7*. English 30/12/2011 289 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist ND, REEVING: 22 English 30/12/2011 290 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 135 DOUBLE GIRDER HOIST ND, REEVING: 24 Hoisting speed (m/min) Load Class kg Fem/ISO 8000 3m/M6 10000 2m/M5 Hoist dimensions HOL Length m code 4 D 6.5 E 9 F 12.5 G 16.5 H 23 J Motor dimensions Motor M3 (mm) Weight ( kg) P5 722 58 F gear + P5/T5 motor High Low 5 0.8 5 0.8 M1 mm 697 817 967 1157 1407 1757 P6 722 85 H gear + P6/T6 motor High Low 8 1.3 8 1.3 M2 mm 279 217 292 197 255 280 H1 mm 703 705 853 855 1034 1234 P7 762 105 T5 642 45 J gear + P7/T7 motor High Low 10 1.7 10 1.7 L7 mm 43 43 43 43 43 43 T6 722 65 L7* mm 63 63 63 63 63 63 Min R mm 1400 1400 1700 1700 2000 2400 Weight kg 780 840 850 910 940 1045 T7 722 71 Trolley dimensions C 801 L1 382 L14 648 D1 (∅ ∅) 110 L2 470 L15 648 D2 (∅ ∅) 140 L3 400 L16 722 D3 (∅ ∅) 63 L4 15 L17 148 WB 1000 L5 98 L18 88 WW min 50 L6 320 L19 900 WW max 85 L8 1296 L20 148 L9 510 L21 255 L10 420 L11 100 L12 500 L13 500 D002135_A 005030 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1400, 1700, 2000 and 2400. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension L7*. English 30/12/2011 291 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist ND, REEVING: 24 English 30/12/2011 292 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 136 DOUBLE GIRDER HOIST ND, REEVING: 26 Hoisting speed (m/min) Load Class kg Fem/ISO 12000 3m/M6 15000 2m/M5 Hoist dimensions HOL Length m code 4 E 6 F 8 G 11 H 15 J Motor dimensions Motor P5 M3 (mm) 722 Weight ( kg) 58 F gear + P5/T5 motor High Low 3.2 0.5 3.2 0.5 M1 mm 817 967 1157 1407 1757 P6 722 85 H gear + P6/T6 motor High Low 5 0.8 5 0.8 M2 mm 217 292 197 255 280 P7 762 105 H1 mm 705 852 855 1033 1233 T5 642 45 L6 mm 73 73 73 73 73 T6 722 65 J gear + P7/T7 motor High Low 6.3 1.1 6.3 1.1 L6* mm 93 93 93 93 93 Min R mm 1400 1700 1700 2000 2400 Weight kg 860 870 930 960 1065 T7 722 71 Trolley dimensions C 831 L1 470 L14 703 D1 (∅ ∅) 140 L2 382 L15 128 D2 (∅ ∅) 170 L3 400 L16 163 D3 (∅ ∅) 63 L4 100 L17 103 WB 1000 L5 320 L18 900 WW min 50 L7 1326 L19 163 WW max 85 L8 510 L20 255 L9 423 L21 18 L10 103 L11 460 L12 540 L13 623 D002132_A 005032 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1400, 1700, 2000 and 2400. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension L6*. English 30/12/2011 293 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist ND, REEVING: 26 English 30/12/2011 294 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 137 DOUBLE GIRDER HOIST ND, REEVING: 28 Hoisting speed (m/min) Load Class kg Fem/ISO 16000 2m/M5 20000 1Am/M4 F gear + P5/T5 motor High Low 2.5 0.4 2.5 0.4 Hoist dimensions HOL Length m code 4.5 F 6 G 8 H 11.5 J Motor dimensions Motor P5 M3 (mm) 722 Weight ( kg) 58 M1 mm 967 1157 1407 1757 P6 722 85 H gear + P6/T6 motor High Low 4 0.7 4 0.7 M2 mm 292 197 255 280 P7 762 105 H1 mm 851 855 1032 1232 T5 642 45 T6 722 65 L6 mm 73 73 73 73 J gear + P7/T7 motor High Low 5 0.8 5 0.8 L6* mm 93 93 93 93 Min R mm 1700 1700 2000 2400 Weight kg 890 950 980 1085 T7 722 71 Trolley dimensions C 831 L1 382 L14 700 D1 (∅ ∅) 140 L2 470 L15 128 D2 (∅ ∅) 170 L3 400 L16 163 D3 (∅ ∅) 63 L4 100 L17 103 WB 1000 L5 320 L18 900 WW min 50 L7 1326 L19 163 WW max 85 L8 510 L20 255 L9 423 L21 18 L10 100 L11 463 L12 537 L13 626 D002136_A 005034 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1400, 1700, 2000 and 2400. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension L6*. English 30/12/2011 295 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Double Girder Hoist ND, REEVING: 28 English 30/12/2011 296 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 138 HIGH DOUBLE GIRDER HOIST ND, REEVING: 06 Hoisting speed (m/min) Load Class kg Fem/ISO 12000 3m/M6 15000 2m/M5 F gear + P5/T5 motor High Low 3.2 0.5 3.2 0.5 Hoist dimensions HOL Length m code 6 D 8 E 10 F 13 G M1 mm 682 802 952 1142 Motor dimensions Motor P5 M3 (mm) 722 Weight ( kg) 58 P6 722 85 M2 mm 390 490 620 770 P7 762 105 H gear + P6/T6 motor High Low 5 0.8 5 0.8 H1 mm 557 657 802 952 T5 642 45 H2 mm 53 78 98 132 T6 722 65 L6 mm 73 73 73 73 J gear + P7/T7 motor High Low 6.3 1.1 6.3 1.1 L6* mm 93 93 93 93 Min R mm 1200 1400 1700 2000 Weight kg 825 876 945 1020 T7 722 71 Trolley dimensions C 436 L1 470 L14 663 D1 (∅ ∅) 140 L2 382 L15 163 D2 (∅ ∅) 170 L3 400 L16 103 D3 (∅ ∅) 63 L4 18 L17 900 WB 1000 L5 100 L18 255 WW min 50 L7 1326 L19 163 WW max 85 L8 510 L9 688 L10 100 L11 500 L12 500 L13 715 D002241_A 062247 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1200, 1400, 1700, 2000 and 2400. * Please, disregard the dimension L6*. English 30/12/2011 297 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS High Double Girder Hoist ND, REEVING: 06 English 30/12/2011 298 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 139 HIGH DOUBLE GIRDER HOIST ND, REEVING: 08 Hoisting speed (m/min) Load Class kg Fem/ISO 16000 2m/M5 20000 1Am/M4 F gear + P5/T5 motor High Low 2.5 0.4 2.5 0.4 Hoist dimensions HOL Length m code 4.5 D 6 E 8 F 10 G M1 mm 682 802 952 1142 Motor dimensions Motor P5 M3 (mm) 722 Weight ( kg) 58 P6 722 85 M2 mm 390 490 620 770 P7 762 105 H gear + P6/T6 motor High Low 4 0.7 4 0.7 H1 mm 568 668 798 948 T5 642 45 H2 mm 44 53 76 98 T6 722 65 L6 mm 73 73 73 73 J gear + P7/T7 motor High Low 5 0.8 5 0.8 L6* mm 93 93 93 93 Min R mm 1200 1400 1700 2000 Weight kg 845 896 965 1040 T7 722 71 Trolley dimensions C 599 L1 470 L14 663 D1 (∅ ∅) 140 L2 382 L15 163 D2 (∅ ∅) 170 L3 400 L16 103 D3 (∅ ∅) 63 L4 18 L17 900 WB 1000 L5 100 L18 255 WW min 50 L7 1326 L19 163 WW max 85 L8 510 L9 688 L10 100 L11 500 L12 500 L13 715 D002242_A 062248 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1200, 1400, 1700, 2000 and 2400. * Please, disregard the dimension L6*. English 30/12/2011 299 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS High Double Girder Hoist ND, REEVING: 08 English 30/12/2011 300 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 140 HIGH DOUBLE GIRDER HOIST ND, REEVING: 22 Hoisting speed (m/min) Load Class kg Fem/ISO 4000 3m/M6 5000 2m/M5 Hoist dimensions HOL Length m code 8.5 D 13 E 18 F 25 G 33.5 H 46 J Motor dimensions Motor M3 (mm) Weight ( kg) P5 722 58 F gear + P5/T5 motor High Low 10 1.7 10 1.7 M1 mm 697 817 967 1157 1407 1757 P6 722 85 M2 mm 179 117 143 197 73 248 P7 762 105 H gear + P6/T6 motor High Low 16 2.7 16 2.7 H1 mm 605 605 705 855 850 1200 T5 642 45 T6 722 65 L5 mm 42 42 42 42 42 42 J gear + P7/T7 motor High Low 20 3.3 20 3.3 L5* mm 62 62 62 62 62 62 Min R mm 1200 1200 1400 1700 1700 2400 Weight kg 750 775 835 915 959 1125 T7 722 71 Trolley dimensions C 470 L1 430 L14 128 D1 (∅ ∅) 110 L2 382 L15 148 D2 (∅ ∅) 140 L3 400 L16 88 D3 (∅ ∅) 63 L4 98 L17 900 WB 1000 L6 1296 L18 255 WW min 50 L7 510 L19 148 WW max 85 L8 685 L20 15 L9 100 L10 488 L11 512 L12 636 L13 660 D002243_A 062250 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1200, 1400, 1700, 2000 and 2400. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension L5*. English 30/12/2011 301 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS High Double Girder Hoist ND, REEVING: 22 English 30/12/2011 302 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 141 HIGH DOUBLE GIRDER HOIST ND, REEVING: 24 Hoisting speed (m/min) Load Class kg Fem/ISO 8000 3m/M6 10000 2m/M5 Hoist dimensions HOL Length m code 4 D 6.5 E 9 F 12.5 G 16.5 H 23 J Motor dimensions Motor M3 (mm) Weight ( kg) P5 722 58 F gear + P5/T5 motor High Low 5 0.8 5 0.8 M1 mm 697 817 967 1157 1407 1757 P6 722 85 M2 mm 179 117 143 197 73 248 P7 762 105 H gear + P6/T6 motor High Low 8 1.3 8 1.3 H1 mm 605 605 705 855 850 1200 T5 642 45 T6 722 65 L5 mm 43 43 43 43 43 43 J gear + P7/T7 motor High Low 10 1.7 10 1.7 L5* mm 63 63 63 63 63 63 Min R mm 1200 1200 1400 1700 1700 2400 Weight kg 810 835 895 975 1019 1185 T7 722 71 Trolley dimensions C 536 L1 470 L14 128 D1 (∅ ∅) 110 L2 382 L15 148 D2 (∅ ∅) 140 L3 400 L16 88 D3 (∅ ∅) 63 L4 98 L17 900 WB 1000 L6 1296 L18 255 WW min 50 L7 510 L19 148 WW max 85 L8 685 L20 15 L9 100 L10 500 L11 500 L12 648 L13 648 D002244_A 062269 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1200, 1400, 1700, 2000 and 2400. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension L5*. English 30/12/2011 303 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS High Double Girder Hoist ND, REEVING: 24 English 30/12/2011 304 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 142 HIGH DOUBLE GIRDER HOIST ND, REEVING: 26 Hoisting speed (m/min) Load Class kg Fem/ISO 12000 3m/M6 15000 2m/M5 Hoist dimensions HOL Length m code 4 E 6 F 8 G 11 H 15 J Motor dimensions Motor M3 (mm) Weight ( kg) P5 722 58 F gear + P5/T5 motor High Low 3.2 0.5 3.2 0.5 M1 mm 817 967 1157 1407 1757 P6 722 85 M2 mm 117 143 197 73 248 P7 762 105 H gear + P6/T6 motor High Low 5 0.8 5 0.8 H1 mm 605 705 855 850 1200 T5 642 45 T6 722 65 L5 mm 74 74 74 74 74 J gear + P7/T7 motor High Low 6.3 1.1 6.3 1.1 L5* mm 94 94 94 94 94 Min R mm 1200 1400 1700 1700 2400 Weight kg 860 920 1000 1045 1210 T7 722 71 Trolley dimensions C 566 L1 470 L14 128 D1 (∅ ∅) 140 L2 382 L15 163 D2 (∅ ∅) 170 L3 400 L16 103 D3 (∅ ∅) 63 L4 100 L17 900 WB 1000 L6 1326 L18 255 WW min 50 L7 510 L19 163 WW max 85 L8 688 L20 18 L9 103 L10 460 L11 540 L12 623 L13 703 D002245_A 062270 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1200, 1400, 1700, 2000 and 2400. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension L5*. English 30/12/2011 305 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS High Double Girder Hoist ND, REEVING: 26 English 30/12/2011 306 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 143 HIGH DOUBLE GIRDER HOIST ND, REEVING: 28 Hoisting speed (m/min) Load Class kg Fem/ISO 16000 2m/M5 20000 1Am/M4 Hoist dimensions HOL Length m code 4.5 F 6 G 8 H 11.5 J Motor dimensions Motor M3 (mm) Weight ( kg) P5 722 58 F gear + P5/T5 motor High Low 2.5 0.4 2.5 0.4 M1 mm 967 1157 1407 1757 P6 722 85 M2 mm 143 197 73 248 H gear + P6/T6 motor High Low 4 0.7 4 0.7 H1 mm 705 855 850 1200 P7 762 105 T5 642 45 T6 722 65 L5 mm 74 74 74 74 J gear + P7/T7 motor High Low 5 0.8 5 0.8 L5* mm 94 94 94 94 Min R mm 1400 1700 1700 2400 Weight kg 940 1020 1065 1230 T7 722 71 Trolley dimensions C 566 L1 470 L14 128 D1 (∅ ∅) 140 L2 382 L15 163 D2 (∅ ∅) 170 L3 400 L16 103 D3 (∅ ∅) 63 L4 100 L17 900 WB 1000 L6 1326 L18 255 WW min 50 L7 510 L19 163 WW max 85 L8 688 L20 18 L9 103 L10 463 L11 537 L12 626 L13 700 D002246_A 062271 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Min R with service platform and second brake. Note: Standard rail gauges: 1400, 1700, 2000 and 2400. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension L5*. English 30/12/2011 307 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS High Double Girder Hoist ND, REEVING: 28 English 30/12/2011 308 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 144 NORMAL HEADROOM HOIST ND, REEVING: 06 Hoisting speed (m/min) Load Class kg Fem/ISO 12000 3m/M6 15000 2m/M5 F gear + P5/T5 motor High Low 3.2 0.5 3.2 0.5 Hoist dimensions HOL Length m code 6 D 8 E 10 F 13 G Motor dimensions Motor M2 (mm) Weight ( kg) Trolley dimensions B min B max 100 E1 102 L7 288 610 E2 420 L8 714 M1 mm 682 802 952 1142 P5 722 58 P6 722 85 C 1325 E3 656 L9 40 H gear + P6/T6 motor High Low 5 0.8 5 0.8 H2 mm 53 78 98 132 P7 762 105 D1 (∅ ∅) 125 E4 540 L10 40 D3 (∅ ∅) 63 E5 302.5 L11 125 H5 mm 722 722 722 722 T5 642 45 E6 204 L12 2 H5* mm 742 742 742 742 T6 722 65 H1 257 M3 229 J gear + P7/T7 motor High Low 6.3 1.1 6.3 1.1 Weight kg 980 1000 1090 1150 Travelling dimensions Motor MF06MA M4 (mm) 360 T7 722 71 H6 756 M6 148 L2 42 W1 97.5 L4 513 L5 170 MF06LA 400 L6 2 D002125_A 062276 Trolley dimensions Length L13 code D/E 600 F/G 640 L15 332 632 Note: All dimensions in mm. Note: Weight calculated with P5, when B=300 mm * Please, disregard the dimension H5*. English 30/12/2011 309 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 06 English 30/12/2011 310 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 145 NORMAL HEADROOM HOIST ND, REEVING: 06, CURVED TRACK Hoisting speed (m/min) Load Class kg Fem/ISO 12000 3m/M6 15000 2m/M5 F gear + P5/T5 motor High Low 3.2 0.5 3.2 0.5 Hoist dimensions HOL Length m code 6 D 8 E 10 F 13 G Motor dimensions Motor M2 (mm) Weight ( kg) Trolley dimensions B min B max 120 E1 101 L7 288 300 E2 420 L8 817 M1 mm 682 802 952 1142 P5 722 58 P6 722 85 C 1430 E3 767 L9 40 D1 (∅ ∅) 125 E4 540 L10 40 H gear + P6/T6 motor High Low 5 0.8 5 0.8 M3 mm 600 600 640 640 P7 762 105 D3 (∅ ∅) 63 E5 302.5 L11 84 H2 mm 53 78 98 132 T5 642 45 H5 mm 722 722 722 722 T6 722 65 J gear + P7/T7 motor High Low 6.3 1.1 6.3 1.1 H5* mm 742 742 742 742 Weight kg 1360 1450 1600 1690 Travelling dimensions Motor MF06MA MF06LA M4 (mm) 360 400 T7 722 71 R min 2500 E6 315 L12 8.5 H1 260 M3 232 H6 756 M6 148 L2 42 W1 97.5 L4 513 L5 170 L6 2 D004208_A 062277 Trolley dimensions Length L13 code D/E 600 F/G 640 L15 340 640 Note: Weight calculated with P5 motor. Note: All dimensions in mm. * Please, disregard the dimension H5*. English 30/12/2011 311 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 06, Curved Track English 30/12/2011 312 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 146 NORMAL HEADROOM HOIST ND, REEVING: 08 Hoisting speed (m/min) Load Class kg Fem/ISO 16000 2m/M5 20000 1Am/M4 F gear + P5/T5 motor High Low 2.5 0.4 2.5 0.4 Hoist dimensions HOL Length m code 4.5 D 6 E 8 F 10 G Motor dimensions Motor M2 (mm) Weight ( kg) Trolley dimensions B min B max 80 E1 102 L7 288 610 E2 420 L8 714 M1 mm 682 802 952 1142 P5 722 58 P6 722 85 C 1488 E3 656 L9 40 D1 (∅ ∅) 125 E4 540 L10 40 H gear + P6/T6 motor High Low 4 0.7 4 0.7 M3 mm 600 600 640 640 P7 762 105 D3 (∅ ∅) 63 E5 302.5 L11 125 H2 mm 44 53 76 98 T5 642 45 H5 mm 730 730 730 730 T6 722 65 E6 204 L12 2 H1 269 M3 229 J gear + P7/T7 motor High Low 5 0.8 5 0.8 H5* mm 750 750 750 750 Travelling dimensions Motor MF06MA MF06LA M4 (mm) 360 400 T7 722 71 H6 747.5 M6 148 Weight kg 990 1010 1100 1160 L2 42 W1 97.5 L4 513 L5 170 L6 2 D002128_A 062278 Trolley dimensions Length L13 code D/E 600 F/G 640 L15 332 632 Note: Weight calculated with P5 motor, when B=300 mm. Note: All dimensions in mm. * Please, disregard the dimension H5*. English 30/12/2011 313 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 08 English 30/12/2011 314 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 147 NORMAL HEADROOM HOIST ND, REEVING: 08, CURVED TRACK Hoisting speed (m/min) Load Class kg Fem/ISO 16000 2m/M5 20000 1Am/M4 F gear + P5/T5 motor High Low 2.5 0.4 2.5 0.4 Hoist dimensions HOL Length m code 4.5 D 6 E 8 F 10 G Motor dimensions Motor M2 (mm) Weight ( kg) Trolley dimensions B min B max 120 E1 101 L7 288 300 E2 420 L8 817 M1 mm 682 802 952 1142 P5 722 58 P6 722 85 C 1592 E3 767 L9 40 D1 (∅ ∅) 125 E4 540 L10 40 H gear + P6/T6 motor High Low 4 0.7 4 0.7 M3 mm 600 600 640 640 P7 762 105 D3 (∅ ∅) 63 E5 302.5 L11 84 H2 mm 44 53 76 98 T5 642 45 H5 mm 730 730 730 730 T6 722 65 J gear + P7/T7 motor High Low 5 0.8 5 0.8 H5* mm 750 750 750 750 Weight kg 1360 1450 1600 1700 Travelling dimensions Motor MF06MA MF06LA M4 (mm) 360 400 T7 722 71 R min 2500 E6 315 L12 8.5 H1 272 M3 232 H6 747.5 M6 148 L2 42 W1 97.5 L4 513 L5 170 L6 2 D004209_A 062280 Trolley dimensions Length L13 code D/E 600 F/G 640 L15 340 640 Note: Weight calculated with P5 motor. Note: All dimensions in mm. * Please, disregard the dimension H5*. English 30/12/2011 315 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 08, Curved Track English 30/12/2011 316 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 148 NORMAL HEADROOM HOIST ND, REEVING: 22 Hoisting speed (m/min) Load Class kg Fem/ISO 4000 3m/M6 5000 2m/M5 E gear + P5/T5 motor High Low 8 1.3 8 1.3 Hoist dimensions HOL Length m code 8.5 D 13 E 18 F 25 G 33.5 H 46 J M1 mm 697 817 967 1157 1407 1757 Motor dimensions Motor P5 M2 (mm) 722 Weight ( kg) 58 Trolley dimensions B min B max 100 E2 420 L9 40 610 E3 617 L10 40 M3 mm 28.5 88.5 163.5 -96.5 28.5 203.5 P6 722 85 C 1318 E4 540 L12 1 D1 (∅ ∅) 100 E5 302.5 M5 128 P7 762 105 F gear + P5/T5 motor High Low 10 1.7 10 1.7 H1 mm 245 245 245 600 600 600 H5 mm 679 679 679 679 679 679 T5 642 45 D3 (∅ ∅) 63 E6 165 M6 148 H gear + P6/T6 motor High Low 16 2.7 16 2.7 T6 722 65 H6 798.5 W1 80.6 L2 33 H5* mm 699 699 699 699 699 699 Weight kg 770 790 810 1030 1070 1120 Travelling dimensions Motor MF06MA M4 (mm) 360 T7 722 71 L4 516 J gear + P7/T7 motor High Low 20 3.3 20 3.3 L5 150 L6 2 L7 253 MF06LA 400 L8 676 D003134_A 062281 Trolley dimensions Length E1 code D/E/F 215 G/H/J 13 L11 212 245 Note: Weight calculated with P5, when B=300 mm. Note: All dimensions in mm. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension H5*. English 30/12/2011 317 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 22 English 30/12/2011 318 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 149 NORMAL HEADROOM HOIST ND, REEVING: 22, CURVED TRACK Hoisting speed (m/min) Load Class kg Fem/ISO 4000 3m/M6 5000 2m/M5 E gear + P5/T5 motor High Low 8 1.3 8 1.3 Hoist dimensions HOL Length m code 8.5 D 13 E 18 F 25 G 33.5 H 46 J M1 mm 697 817 967 1157 1407 1757 Motor dimensions Motor P5 M2 (mm) 722 Weight ( kg) 58 P6 722 85 Trolley dimensions B min B max 90 E2 420 L9 42 350 E3 732 L10 40 C 1438 E4 540 L12 8.5 D1 (∅ ∅) 100 E5 302.5 M5 128 F gear + P5/T5 motor High Low 10 1.7 10 1.7 M3 mm 28.5 88.5 163.5 -201.5 -76.5 98.5 P7 762 105 H1 mm 245 245 245 705 705 705 T5 642 45 D3 (∅ ∅) 63 E6 280 M6 148 H5 mm 679 679 679 679 679 679 T6 722 65 H6 798.5 W1 80.6 H gear + P6/T6 motor High Low 16 2.7 16 2.7 H5* mm 699 699 699 699 699 699 Weight kg 1080 1160 1240 1490 1580 1700 Travelling dimensions Motor MF06MA M4 (mm) 360 T7 722 71 L2 33 J gear + P7/T7 motor High Low 20 3.3 20 3.3 L4 516 L5 150 L6 2 L7 253 MF06LA 400 L8 783 D004206_A 062282 Track radius B 90 110 120 - 109 119 350 R min 2500 2000 1500 Trolley dimensions Length E1 code D/E/F 195 G/H/J 93 L11 202 140 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension H5*. English 30/12/2011 319 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 22, Curved Track English 30/12/2011 320 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 150 NORMAL HEADROOM HOIST ND, REEVING: 24 Hoisting speed (m/min) Load Class kg Fem/ISO 6300 3m/M6 8000 3m/M6 10000 2m/M5 E gear + P5/T5 motor High Low 4 0.7 4 0.7 4 0.7 Hoist dimensions HOL Length m code 4 D 6.5 E 9 F 12.5 G 16.5 H 23 J Motor dimensions Motor M2 (mm) Weight ( kg) Trolley dimensions B min B max 80 E2 420 L9 40 610 E3 617 L10 40 M1 mm 697 817 967 1157 1407 1757 P5 722 58 P6 722 85 C 1294 E4 540 L12 1 D1 (∅ ∅) 100 E5 302.5 M4 400 M3 mm 28.5 88.5 163.5 -96.5 28.5 203.5 F gear + P5/T5 motor High Low 5 0.8 5 0.8 5 0.8 H1 mm 245 245 245 600 600 600 P7 762 105 D3 (∅ ∅) 63 E6 165 M5 128 H5 mm 693 693 693 693 693 693 T5 642 45 H6 785.5 M6 148 H gear + P6/T6 motor High Low 8 1.3 8 1.3 8 1.3 H5* mm 713 713 713 713 713 713 T6 722 65 L2 33 W1 80.6 J gear + P7/T7 motor High Low 10 1.7 10 1.7 10 1.7 Weight kg 790 800 830 1050 1080 1130 T7 722 71 L4 516 L5 150 L6 2 L7 253 L8 676 D003135_A 062290 Trolley dimensions Length E1 code D/E/F 215 G/H/J 13 L11 212 245 Note: Weight calculated with P5 motor, when B=300 mm. Note: All dimensions in mm. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension H5*. English 30/12/2011 321 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 24 English 30/12/2011 322 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 151 NORMAL HEADROOM HOIST ND, REEVING: 24, CURVED TRACK Hoisting speed (m/min) Load Class kg Fem/ISO 6300 3m/M6 8000 3m/M6 10000 2m/M5 E gear + P5/T5 motor High Low 4 0.7 4 0.7 4 0.7 Hoist dimensions HOL Length m code 4 D 6.5 E 9 F 12.5 G 16.5 H 23 J Motor dimensions Motor M2 (mm) Weight ( kg) Trolley dimensions B min B max 90 E2 420 L9 42 350 E3 732 L10 40 M1 mm 697 817 967 1157 1407 1757 P5 722 58 P6 722 85 C 1414 E4 540 L12 7 D1 (∅ ∅) 100 E5 302.5 M4 400 F gear + P5/T5 motor High Low 5 0.8 5 0.8 5 0.8 M3 mm 28.5 88.5 163.5 -201.5 -76.5 98.5 H1 mm 245 245 245 705 705 705 P7 762 105 D3 (∅ ∅) 63 E6 280 M5 128 H5 mm 693 693 693 693 693 693 T5 642 45 H6 785.5 M6 148 H gear + P6/T6 motor High Low 8 1.3 8 1.3 8 1.3 H5* mm 713 713 713 713 713 713 T6 722 65 L2 33 W1 80.6 J gear + P7/T7 motor High Low 10 1.7 10 1.7 10 1.7 Weight kg 1060 1140 1220 1460 1560 1740 T7 722 71 L4 516 L5 150 L6 2 L7 253 L8 783 D004207_A 062291 Track radius B 90 - 109 110 - 119 120 - 350 R min 2500 2000 1500 Trolley dimensions Length code D/E/F G/H/J E1 L11 195 93 202 140 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension H5*. English 30/12/2011 323 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 24, Curved Track English 30/12/2011 324 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 152 NORMAL HEADROOM HOIST ND, REEVING: 26 Hoisting speed (m/min) Load Class kg Fem/ISO 12000 3m/M6 15000 2m/M5 F gear + P5/T5 motor High Low 3.2 0.5 3.2 0.5 Hoist dimensions HOL Length m code 4 E 6 F 8 G 11 H 15 J M1 mm 817 967 1157 1407 1757 Motor dimensions Motor P5 M2 (mm) 722 Weight ( kg) 58 P6 722 85 Trolley dimensions B min B max 80 E2 420 L9 40 610 E3 666 L10 40 C 1335 E4 540 L12 1 D1 (∅ ∅) 125 E5 302.5 M5 128 H gear + P6/T6 motor High Low 5 0.8 5 0.8 M3 mm 8.5 83.5 178.5 28.5 203.5 P7 762 105 H1 mm 325 325 325 600 600 T5 642 45 D3 (∅ ∅) 63 E6 214 M6 148 H5 mm 697 697 697 697 697 T6 722 65 H6 780.5 W1 97.5 L2 42 J gear + P7/T7 motor High Low 6.3 1.1 6.3 1.1 H5* mm 717 717 717 717 717 Travelling dimensions Motor MF06MA M4 (mm) 360 T7 722 71 L4 516 Weight kg 940 970 1030 1220 1300 L5 170 L6 2 L7 288 MF06LA 400 L8 725 D003136_A 062292 Trolley dimensions Length E1 code E/F/G 93 H/J 113 L11 220 245 Note: Weight calculated with P5 motor, when B=300 mm. Note: All dimensions in mm. Note: gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension H5*. English 30/12/2011 325 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 26 English 30/12/2011 326 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 153 NORMAL HEADROOM HOIST ND, REEVING: 26, CURVED TRACK Hoisting speed (m/min) Load Class kg Fem/ISO 12000 3m/M6 15000 2m/M5 F gear + P5/T5 motor High Low 3.2 0.5 3.2 0.5 Hoist dimensions HOL Length m code 4 E 6 F 8 G 11 H 15 J M1 mm 817 967 1157 1407 1757 Motor dimensions Motor P5 M2 (mm) 722 Weight ( kg) 58 P6 722 85 Trolley dimensions B min B max 120 E2 420 L9 40 300 E3 767 L10 40 C 1441 E4 540 L12 7 D1 (∅ ∅) 125 E5 302.5 M5 128 H gear + P6/T6 motor High Low 5 0.8 5 0.8 M3 mm 41.5 116.5 -136.5 -11.5 163.5 P7 762 105 H1 mm 292.5 292.5 640 640 640 T5 642 45 D3 (∅ ∅) 63 E6 315 M6 148 H5 mm 697 697 697 697 697 T6 722 65 J gear + P7/T7 motor High Low 6.3 1.1 6.3 1.1 H5* mm 717 717 717 717 717 Weight kg 1340 1420 1660 1760 1940 Travelling dimensions Motor MF06MA M4 (mm) 360 T7 722 71 MF06LA 400 R min 2500 H6 780.5 W1 97.5 L2 42 L4 516 L5 170 L6 2 L7 288 L8 818 D004201_A 062294 Trolley dimensions Length E1 code E/F 148 G/H/J 158 L11 155 205 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension H5*. English 30/12/2011 327 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 26, Curved Track English 30/12/2011 328 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 154 NORMAL HEADROOM HOIST ND, REEVING: 28 Hoisting speed (m/min) Load Class kg Fem/ISO 16000 2m/M5 20000 1Am/M4 F gear + P5/T5 motor High Low 2.5 0.4 2.5 0.4 Hoist dimensions HOL Length m code 4.5 F 6 G 8 H 11.5 J Motor dimensions Motor M2 (mm) Weight ( kg) Trolley dimensions B min B max 80 E2 420 L9 40 610 E3 666 L10 40 M1 mm 967 1157 1407 1757 P5 722 58 P6 722 85 C 1335 E4 540 L12 1 D1 (∅ ∅) 125 E5 302.5 M5 128 H gear + P6/T6 motor High Low 4 0.7 4 0.7 M3 mm 83.5 178.5 28.5 203.5 P7 762 105 D3 (∅ ∅) 63 E6 214 M6 148 H1 mm 325 325 600 600 T5 642 45 H6 778.5 W1 97.5 H5 mm 699 699 699 699 T6 722 65 L2 42 J gear + P7/T7 motor High Low 5 0.8 5 0.8 H5* mm 719 719 719 719 Travelling dimensions Motor MF06MA M4 (mm) 360 T7 722 71 L4 516 Weight kg 990 1040 1230 1320 L5 170 L6 2 L7 288 MF06LA 400 L8 725 D003137_A 062296 Trolley dimensions Length E1 code E/F/G 93 H/J 113 L11 220 245 Note: Weight calculated with P5 motor, when B=300 mm. Note: All dimensions in mm. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension H5*. English 30/12/2011 329 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 28 English 30/12/2011 330 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 155 NORMAL HEADROOM HOIST ND, REEVING: 28, CURVED TRACK Hoisting speed (m/min) Load Class kg Fem/ISO 16000 2m/M5 20000 1Am/M4 F gear + P5/T5 motor High Low 2.5 0.4 2.5 0.4 Hoist dimensions HOL Length m code 4.5 F 6 G 8 H 11.5 J Motor dimensions Motor M2 (mm) Weight ( kg) Trolley dimensions B min B max 120 E2 420 L9 40 300 E3 767 L10 40 M1 mm 967 1157 1407 1757 P5 722 58 P6 722 85 C 1441 E4 540 L12 7 D1 (∅ ∅) 125 E5 302.5 M5 128 M3 mm 116.5 -136.5 -11.5 163.5 P7 762 105 D3 (∅ ∅) 63 E6 315 M6 148 H gear + P6/T6 motor High Low 4 0.7 4 0.7 H1 mm 292.5 640 640 640 T5 642 45 H5 mm 699 699 699 699 T6 722 65 J gear + P7/T7 motor High Low 5 0.8 5 0.8 H5* mm 719 719 719 719 Weight kg 1440 1680 1780 1950 Travelling dimensions Motor MF06MA M4 (mm) 360 T7 722 71 MF06LA 400 R min 2500 H6 778.5 W1 97.5 L2 42 L4 516 L5 170 L6 2 L7 288 L8 818 D004202_A 062297 Trolley dimensions Length E1 code F 148 G/H/J 158 L11 155 205 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension H5*. English 30/12/2011 331 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Normal Headroom Hoist ND, REEVING: 28, Curved Track English 30/12/2011 332 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 156 FIXED HOIST ND, REEVING: 06 Hoisting speed (m/min) Load Class kg Fem/ISO 12000 3m/M6 15000 2m/M5 F gear + P5/T5 motor High Low 3.2 0.5 3.2 0.5 Hoist dimensions HOL Length m code 6 D 8 E 10 F 13 G Motor dimensions Motor M4 (mm) Weight ( kg) Trolley dimensions C D1 (∅ ∅) 683 L1 1280 18 L2 515 M1 mm 682 802 952 1142 P5 722 58 H gear + P6/T6 motor High Low 5 0.8 5 0.8 M2 mm 1140 1140 1480 1480 P6 722 85 M3 mm 261 141 291 101 P7 762 105 H2 mm 53 78 98 132 T5 642 45 T6 722 65 J gear + P7/T7 motor High Low 6.3 1.1 6.3 1.1 L4 mm 736 736 736 736 L4* mm 756 756 756 756 Weight kg 620 630 685 700 T7 722 71 H1 360 L3 565 L5 30 L6 500 L7 440 L8 90 L9 197 L10 696 D002123_A 062191 Note: Weight calculated with P5 motor. Note: All dimensions in mm. * Please, disregard the dimension L4*. English 30/12/2011 333 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist ND, REEVING: 06 English 30/12/2011 334 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 157 FIXED HOIST ND, REEVING: 08 Hoisting speed (m/min) Load Class kg Fem/ISO 16000 2m/M5 20000 1Am/M4 F gear + P5/T5 motor High Low 2.5 0.4 2.5 0.4 Hoist dimensions HOL Length m code 4.5 D 6 E 8 F 10 G Motor dimensions Motor M4 (mm) Weight ( kg) Trolley dimensions C D1 (∅ ∅) 772 L1 1280 18 L2 515 M1 mm 682 802 952 1142 P5 722 58 M2 mm 1140 1140 1480 1480 P6 722 85 H gear + P6/T6 motor High Low 4 0.7 4 0.7 M3 mm 261 141 291 101 P7 762 105 H2 mm 44 53 76 98 T5 642 45 J gear + P7/T7 motor High Low 5 0.8 5 0.8 L4 mm 736 736 736 736 T6 722 65 L4* mm 756 756 756 756 Weight kg 625 635 650 670 T7 722 71 H1 372 L3 565 L5 30 L6 440 L7 500 L8 90 L9 197 L10 696 D002126_A 062192 Note: Weight calculated with P5 motor. Note: All dimensions in mm. * Please, disregard the dimension L4*. English 30/12/2011 335 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist ND, REEVING: 08 English 30/12/2011 336 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 158 FIXED HOIST ND, REEVING: 22 Hoisting speed (m/min) Load Class kg Fem/ISO 4000 3m/M6 5000 2m/M5 Hoist dimensions HOL Length m code 8.5 D 13 E 18 F 25 G 33.5 H 46 J Motor dimensions Motor M4 (mm) Weight ( kg) F gear + P5/T5 motor High Low 10 1.7 10 1.7 M1 mm 696 816 966 1156 1406 1756 P5 722 58 M2 mm 1110 1110 1110 1110 1710 1710 P6 722 85 H gear + P6/T6 motor High Low 16 2.7 16 2.7 M3 mm 253 193 118 23 198 23 P7 762 105 H1 mm 650 650 650 650 950 950 T5 642 45 J gear + P7/T7 motor High Low 20 3.3 20 3.3 L7 mm 976 976 976 976 976 976 T6 722 65 L7* mm 996 996 996 996 996 996 Weight kg 380 440 450 490 605 1000 T7 722 71 Trolley dimensions C D1 (∅ ∅) 640 L1 1280 L14 150 18 L2 515 L3 510 L4 5 L5 297 L6 403 L8 90 L9 325 L10 440 L11 500 L12 519 L13 128 D002129_A 062199 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension L7*. English 30/12/2011 337 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist ND, REEVING: 22 English 30/12/2011 338 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 159 FIXED HOIST ND, REEVING: 24 Hoisting speed (m/min) Load Class kg Fem/ISO 8000 3m/M6 10000 2m/M5 Hoist dimensions HOL Length m code 4 D 6.5 E 9 F 12.5 G 16.5 H 23 J Motor dimensions Motor M4 (mm) Weight ( kg) F gear + P5/T5 motor High Low 5 0.8 5 0.8 M1 mm 696 816 966 1156 1406 1756 P5 722 58 M2 mm 1110 1110 1110 1110 1710 1710 P6 722 85 H gear + P6/T6 motor High Low 8 1.3 8 1.3 M3 mm 253 193 118 23 198 23 P7 762 105 H1 mm 648 648 648 648 948 948 T5 642 45 J gear + P7/T7 motor High Low 10 1.7 10 1.7 L7 mm 976 976 976 976 976 976 T6 722 65 L7* mm 996 996 996 996 996 996 Weight kg 440 500 530 570 685 1000 T7 722 71 Trolley dimensions C D1 (∅ ∅) 706 L1 1280 L14 150 18 L2 515 L3 510 L4 5 L5 285 L6 415 L8 90 L9 325 L10 440 L11 500 L12 519 L13 128 D002130_A 062201 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension L7*. English 30/12/2011 339 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist ND, REEVING: 24 English 30/12/2011 340 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 160 FIXED HOIST ND, REEVING: 26 Hoisting speed (m/min) Load Class kg Fem/ISO 12000 3m/M6 15000 2m/M5 Hoist dimensions HOL Length m code 4 E 6 F 8 G 11 H 15 J Motor dimensions Motor M4 (mm) Weight ( kg) F gear + P5/T5 motor High Low 3.2 0.5 3.2 0.5 M1 mm 816 966 1156 1406 1756 P5 722 58 M2 mm 1110 1110 1110 1710 1710 P6 722 85 H gear + P6/T6 motor High Low 5 0.8 5 0.8 M3 mm 193 118 23 198 23 P7 762 105 H1 mm 647 647 647 947 947 T5 642 45 J gear + P7/T6 motor High Low 6.3 1.1 6.3 1.1 L7 mm 976 976 976 976 976 T6 722 65 L7* mm 996 996 996 996 996 Weight kg 520 530 590 705 1000 T7 722 71 Trolley dimensions C D1 (∅ ∅) 739 L1 1280 L14 128 18 L2 515 L3 510 L4 5 L5 280 L6 420 L8 90 L9 325 L10 440 L11 500 L12 519 L13 150 D002131_A 005112 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension L7*. English 30/12/2011 341 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist ND, REEVING: 26 English 30/12/2011 342 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS 161 FIXED HOIST ND, REEVING: 28 Hoisting speed (m/min) Load Class kg Fem/ISO 16000 2m/M5 20000 1Am/M4 F gear + P5/T5 motor High Low 2.5 0.4 2.5 0.4 Hoist dimensions HOL Length m code 4.5 F 6 G 8 H 11.5 J Motor dimensions Motor M4 (mm) Weight ( kg) M1 mm 966 1156 1406 1756 P5 722 58 M2 mm 1110 1110 1710 1710 P6 722 85 H gear + P6/T6 motor High Low 4 0.7 4 0.7 M3 mm 118 23 198 23 P7 762 105 H1 mm 655 655 955 955 T5 642 45 J gear + P7/T7 motor High Low 5 0.8 5 0.8 L8 mm 976 976 976 976 T6 722 65 L8* mm 996 996 996 996 Weight kg 550 610 725 1000 T7 722 71 Trolley dimensions C D1 (∅ ∅) 739 L1 128 L14 519 18 L2 1280 L3 515 L4 510 L5 5 L6 277 L7 423 L9 90 L10 325 L11 440 L12 500 L13 150 D002133_A 005118 Note: Weight calculated with P5 motor. Note: All dimensions in mm. Note: Gear brake as standard brake for drum lengths H and J. * Please, disregard the dimension L8*. English 30/12/2011 343 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved. TECHNICAL GUIDE FOR HOISTS Fixed Hoist ND, REEVING: 28 English 30/12/2011 344 / 344 This document and the information contained herein, is the exclusive property of SWF Krantechnik GmbH and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of SWF Krantechnik GmbH. Copyright © (2010) SWF Krantechnik GmbH. All rights reserved.