compact brazed heat exchangers - IN

Transcription

compact brazed heat exchangers - IN
A STEP TOWARDS A MORE
EFFICIENT REFRIGERANT INDUSTRY
Simulation is one of the most important stages in
the development of new and existing CBEs. The
ability to evaluate different plate patterns by
simulating flow rate and directions offers great
opportunities for improved functionality.
SWEP is a rapidly growing international company in the
heat transfer field. Decades of creative work, leadingedge competence and committed SWEP people have
resulted in the world's most effective offer of products.
World-leading within its field, SWEP constantly
advances the front line in order to be able to use the very
latest technology. SWEP's aim is constantly to offer its
customers excellent performance, economy and service.
Today, SWEP is close to its customers, with representation in more than 50 countries and its own
dedicated salesforce in more than 20 countries. With
highly efficient production units in Sweden, Switzerland,
USA and Malaysia it is possible to serve customers all
over the world. The company is part of the global Dover
Corporation.
FOR REFRIGERANT APPLICATIONS
Our "Technical Handbook about Refrigerant
Applications" offers you every opportunity to
broaden your competence, with first-class
information about everything from basic heat
transfer to compressors and condensers.
A
DOVER
COMPANY
SWEP International AB
Box 105, SE-261 22 Landskrona, Sweden
Tel. +46 (0)418 40 04 00. Fax +46 (0)418 292 95
Internet: www.swep.net
E-mail: info@swep.net
MC0211-06
Each SWEP CBE is delivered with full traceability
and verified functionality. A SWEP CBE is
approved by leading independent international
bodies, such as PED, UL, KHK and CSA.
92030-9540
Air dryers, chillers, cascade heat
pumps and refrigeration systems are
typical examples of applications that
operate more efficiently using
compact brazed heat exchangers
(CBEs). The list of new applications
is growing continuously, and today
you will find SWEP CBEs in virtually
all kinds/sorts of applications in the
global refrigerant market. Alongside
the increase in the areas of use,
there is also a rapid technological
changeover to modern high-efficiency SWEP CBEs where shelland-tubes were previously used.
Extensive research and development combined with effective use of
CFD (Computational Fluid Dynamics) have enabled us to offer the
market's most comprehensive range
of condensers, desuperheaters,
evaporators and subcoolers for all
types of refrigerant applications.
And by using standardized components, we can cost-effectively mass
customize the product precisely to
your needs.
We can always offer you more,
thanks to our complete program of
effective aids. SSP, the SWEP
Software package that we have
developed for dimensioning exchangers and dynamic drawing
generation, is the soft way to get
hard facts. Or why not do some indepth reading in our Refrigerant
Handbook, the complete handbook
for CBE refrigerant applications?
Contact one of our expert heat
transfer consultants today to find out
more about SWEP CBEs and
energy-saving solutions.
COMPACT BRAZED HEAT EXCHANGERS
A
DOVER
COMPANY
A COMPLETE RANGE OF DEDICATED CBEs FOR REFRIGERANT APPLICATIONS
117 mm
4.61 in.
The concept
Condenser
ARI conditions
In principle, a CBE is constructed
as a plate package of corrugated
channel plates between front and
rear cover-plate packages. The
cover plate packages consist of
sealing plates, blind rings and cover
plates. During the vacuum-brazing
process, a brazed joint is formed at
every contact point between the
base and the filler material.
B
Evaporator
ARI conditions
Standard CBE (Compact
Brazed Heat Exchanger)
72 mm
2.84 in.
Sealing
F3 F4
Blind plate
rings
Connec(StartCover
tions
plate(s) plate)
117 mm
4.61 in.
310 mm
12.21 in.
B5
B10
V10
187 mm
7.45 in.
0
1
2
3
4
5
6
0
3.4
6.8
10
14
17
20
0
1
2
3
4
5
6
0
3.4
6.8
10
14
17
20
kW
kBTU/h
kW
kBTU/h
0
2
4
6
8
10
12
0
6.8
14
20
27
34
41
12
kW
41 kBTU/h
0
2
4
6
8
10
0
6.8
14
20
27
34
287 mm
11.31 in.
kW
kBTU/h
0
20
40
60
80
100
120
0
68
137
205
273
342
410
B35
V35
393 mm
15.48 in.
287 mm
11.31 in.
B12
kW
kBTU/h
524 mm
20.65 in.
B25
V25
465 mm
18.32 in.
B15
B8
Front Cover Plate Package
Cover
Blind
plate(s)
rings
Zero
End
Channel plates hole
plate
channel
plate
72 mm
2.84 in.
243 mm
9.57 in.
117 mm
4.61 in.
Plate Package
F2
DB Patented True dual-circuit CBE
DV
72 mm
2.84 in.
Back Cover Plate Package
F1
Specially designed CBE
with a built-in distribution
device for evaporator duties
V
0
20
40
60
80
100
120
0
68
137
205
273
342
410
kW
kBTU/h
The fluids can pass through the heat
exchanger in different ways. For parallel flow CBEs, there are two different flow configurations: co-current or counter-current.
0
2
4
6
8
10
12
0
20
40
60
80
0
6.8
14
20
27
34
41 kBTU/h
0
68
137
205
273 342 410
12
kW
41 kBTU/h
0
20
40
60
0
68
137 205
0
2
4
6
8
10
0
6.8
14
20
27
34
kW
80
100 120
100 120
273 342 410
kW
kBTU/h
0
20
40
60
0
68
137
205
80 100 120
kW
273 342 410 kBTU/h
kW
kBTU/h
304 mm
11.98 in.
Counter-current flow
304 mm
11.98 in.
243 mm
9.50 in.
119 mm
4.69 in.
243 mm
9.57 in.
Co-current flow
364 mm
14.34 in.
There are several different versions
of the channel plate packages. Below are some examples.
B80
V80
526 mm
20.72 in.
B200
V200
525 mm
20.65 in.
694 mm
27.34 in.
B400
V400
DB47
DV47
525 mm
20.69 in.
694 mm
27.34 in.
DB58
DV58
374 mm
14.74 in.
B60
Two-Pass CBE (../2P), which corresponds to
two units connected in series.
True-Dual
0
20
40
60
80
0
68
137
205
273 342 410
0
20
40
60
80
0
68
137
205
100 120
100 120
273 342 410
kW
kBTU/h
kW
kBTU/h
0
60
120 180
240 300 360
615
820 1025 1230
120 180
240 300 360
0
205 410
0
60
0
205 410
615
820 1025 1230
kW
kBTU/h
kW
kBTU/h
0
100
200 300
0
342
683 1025 1366 1708 2049
0
100
200 300
0
342 683 1025 1366 1708 2049
400 500 600
400 500 600
kW
kBTU/h
kW
kBTU/h
0
60
0
205 410
120 180
240 300 360
615
820 1025 1230
120 180
240 300 360
0
60
0
205 410
615
820 1025 1230
kW
kBTU/h
kW
kBTU/h
0
100
200 300
0
342
683 1025 1366 1708 2049
0
100
200 300
0
342
683 1025 1366 1708 2049
400 500 600
400 500 600
kW
kBTU/h
0
25
50
75
100 125 150
0
85
171
256
342 427 512
kW
kBTU/h
(capacity when used as de-superheater)
kW
kBTU/h