product overview caravans and motorhomes

Transcription

product overview caravans and motorhomes
PRODUCT OVERVIEW
CARAVANS AND
MOTORHOMES
www.hella.com/caravan
02 | 03
CONTENTS
Introduction
Page
4–5
Time travel
Page
6–7
LED indicators and the patented failure check
Page
8–9
DynaView® Evo2
Page
11
Daytime running lights
Page
12 – 15
90 mm low beam headlights and spotlights
Page
16 – 22
90 mm indicators, position lights, fog lights and daytime running lights
Page
23
50 mm headlights
Page
24
Micro DE headlights
Page
25
Indicator and position lights
Page
26 – 29
Headlight cleaning systems
Page
30
Ultrasonic headlight range adjustment
Page
31
Combination rear lights
Page
33 – 45
Clearance lights
Page
46 – 48
Auxiliary stop lights
Page
49 – 50
Reflectors
Page
50 – 51
License plate lights
Page
52 – 53
Side marker lights
Page
55 – 56
Auxiliary indicators
Page
57
Ceiling lights
Page
59 – 63
Orientation lights
Page
62 – 67
Reading lights
Page
68 – 69
Ambient lighting
Page
69
Intelligent Battery Sensor
Page
71 – 72
Switches, plugs, sockets
Page
73 – 74
Battery chargers
Page
75
Hazard warning lights
Page
75
Hand lamps
Page
75
Boxes of spare bulbs
Page
75
Page
76 – 77
FRONT LIGHTING
REAR LIGHTING
SIDE LIGHTING
INTERIOR LIGHTING
ACCESSORIES
ICONS
Overview and description
Freedom without adventure
Caravan or motorhome owners heading out on holiday want to
experience independence, but in their own way.
Anyone who develops, designs and produces homes on wheels
has to set new trends in technology and design with every new
model series.
Anyone with HELLA on board as a partner has boundless
possibilities – as developer, manufacturer or user. HELLA means
real freedom - free from risky adventures.
Depth of innovation. Modular concepts.
Technological leadership.
HELLA has established a leading global position through diligence,
creativity and precision quality. For over one hundred years.
HELLA and modern caravanning – a permanently successful
relationship.
• More safety thanks to innovations in lighting technology: e.g.
Xenon and LED.
• More efficiency thanks to integrated electric and electronic
components.
• More equipment options, more brand characteristics and more
trendsetting: e.g. through an extraordinarily deep range of
products and modular systems.
• More safety in production and use: e.g. thanks to original
equipment quality, synergies from developments in the
international car industry and zero error quality management.
On site HELLA Support.
We don’t just see ourselves as a quality supplier, but as a
development partner as well. If required, our developers and
engineers can work on the optimum solution for your application
with your teams on your premises. This speeds up workflows and
clears the way for new standards. More technological freedom,
more styling freedom, more room for rationalisation: that is
HELLA.
Have a good trip to the future.
04 | 05
We are the 100% service provider for innovative individual customisation.
And for 100 % reliability.
New dimensions in the lighting segment:
After decades of standard solutions, HELLA has continually broken
new ground – and become the Number 1 for customer-specific
solutions. The lead is growing.
Because there are cutting-edge solutions available that only
HELLA has to offer. We are able to cover applications for all global
brands thanks to the work done in our own lighting laboratory.
New dimensions in the field of modular concepts:
Engineers, designers and controllers are equally delighted with
our modular system. It provides you with the whole spectrum
of design possibilities – from futuristic through dynamic, sporty,
business-like, elegant and classic to retro.
Our range offers solutions that no one else can offer. At HELLA,
you can take your pick from our entire line of modern headlights
and lights, ranging from: Halogen, Bi-Halogen®, Xenon and BiXenon® to LED, light transmitters, Ellipsoid and FreeForm FF. You
give us the installation opening and select the design, we will build
your module. In small production runs too, of course.
New dimensions of modular speed:
we want to be faster than everyone else. An optimised time-tomarket process from the first lines on a notebook through to
series delivery allows us to create your custom design in no time.
New dimensions in the field of electrics and electronics:
HELLA covers the whole range of possibilities. From modern
standard solutions to custom application development. And we
remain true to our motto “More safety and more comfort” in this
area, too. HELLA offers the combination of safety stoplight and
rear view camera in one solution, as well as applications for
closing and locking storage compartment flaps and caravan doors.
Also new: The switch generation with 6,000 lasering and lighting
possibilities.
So take us with you on your journey to the future.
Because like you, we love real freedom.
1965
HELLA universal 2-chamber combination rear light
series 1305 with lens reflectors using bulb technology
in the smallest conceivable design.
1998
The 122 mm modular light series for individual and
combined lights is launched. The series will be
enhanced on an ongoing basis in the next few years
with pattern-free and LED lights.
2008
A success story continues:
The Caraluna Modular for vertical flush-mounting
joins the Caraluna family. Pattern-free and coloured
lens with modular reflector inserts, which allow for a
customised appearance, installation with bulb-based
or LED technology and horizontal flush-mounting.
1973
Further development of the 3-chamber combination
rear light series. The 2844 series is launched in a very
progressive design for the time.
2000
The customer-specific multi-function light with
pattern-free lens adorns hobby caravans.
2009
122 mm round light upgrade to LED and a new
member of the Caraluna family: Caraluna Vertical
with chrome effect.
1978
The HELLA universal 3-chamber combination rear
light series 3409 – designed as a surface-mounted
solution for towed vehicles such as trailers –
becomes the lighting standard for caravans.
2002
The Caraluna success story continues. The first
HELLA-specific light with pattern-free lens for
caravans and motorhomes is launched - Caraluna II
for horizontal surface-mounting.
2010
HELLA matches the lighting technology inside the
light with the fluid exterior body design. A ringshaped 3D body around the edge which generates a
“glowing look” thanks to the use of cutting-edge LED
technology takes over the taillight function and gives
the rear end of the new Fendt Brilliant a unique and
unmistakable appearance.
06 | 07
Quick trip to the past
The first “touring cars” appeared as early as the mid-19th century. The sometimes quite
luxuriously equipped predecessors of the modern caravan were invented in Britain. Initially
they were horse-drawn, but shortly after the invention of the motor vehicle the first petroldriven coaches were hitched to the touring cars. There has been a close relationship
between Hella and the automobile for over one hundred years, and this naturally includes
caravans and motorhomes.
Here is a quick look at our most recent shared past.
1986
The HELLA universal 4-chamber combination rear
light series 4460 as surface-mounted solution with
lens pattern becomes established. The design size
increases in line with the more stringent safety
requirements for more light output.
2004
The success story of Caraluna II is continued: The
Caraluna II with chrome effect and transparent lens
with high-sheen vapour-plated reflectors is launched
on the market.
2011
HELLA adapts the lighting technology of a highly
innovative lighting geometry for the Hobby Premium
Caravan. Two opposing “hockey stick" shaped 3D
lights, with LED technology for taillight and stop light,
highlight the successful shape of the vehicle. The
remaining functions with conventional solutions are
installed behind an elegant stripe pattern and go into
the handle which overlaps into the lights. Simply
premium. A milestone in caravan construction.
1989
The HELLA universal 3-chamber combination rear
light series 6459 with lens pattern finds its way into
the caravan industry. The light sweep means it can be
flush-mounted near the outer edges. This design
effect gives a whole new dimension to motorhome
and caravan contours.
2005
Modular light series Agroluna for individual and
combined lights with pattern-free lenses and bulbbased technology is launched. Customer-specific
multi-function light Bürstner and Chateau.
2011
Two opposing eyebrow-shaped lights installed using
innovative light-transmitting technology in LED
technology for the taillight give Knaus motorhomes of
the last generation an unmistakable face. The lights
are equally impressive thanks to the sophisticated
detailing inside. All under the motto: you will see
motorhomes with different eyes.
1996
Birth of the first multi-function light for the
motorhome and caravan industry. As well as
integrating all the light functions, the required
triangular reflector is also integrated horizontally
surface-mounted. The HELLA Caraluna I becomes a
sign of quality and a recognised brand for a whole
industry.
2006
Customer-specific developments for hobby caravans
and motorhomes, Hymer motorhomes and Fendt
caravans and motorhomes. Upgrade to Caraluna
multi-function light series: Caraluna II Plus with
combined indicator/reversing spotlight.
2012
Lighting technology made to measure – HELLA uses
innovative LED light transmitter technology for the
taillight of the new generation of Adria Caravans.
The light transmitters produce a particularly
sophisticated night-time signature, giving Adria
Caravans a distinctive rear design.
More design freedom from LEDs
The use of LEDs gives design engineers much greater design freedom. Ergonomic aspects can be implemented more easily.
Diverse technical options from LEDs.
Depending on the product or customer requirements, HELLA installs LEDs in different optical lighting systems. Here are some examples
of combination rear lights:
Direct light
• Spot-like appearance
• No optical system necessary
• Max. distance of 2 LEDs = 15 mm
Fresnel Systems
• Suitable for all functions
• Homogeneous appearance
Reflector with pattern/
lens without pattern
• High efficiency
• Brilliant appearance
Light transmitter systems
• Elongated appearance
• Homogeneous illumination
• Adapted to curved exterior shape
08 | 09
LED indicators and the patented failure check
Legal requirement in all ECE states
The indicators on vehicles registered for use on public roads
must be monitored. An indicator failure must be communicated
to the driver visually or acoustically. This applies in all ECE states.
A potential failure of the indicator must therefore be monitored
by the vehicle. Manufacturers use different control methods for
this purpose. However, the failure controls in use today cannot
detect simple LED lights and display an error when they are
used. All HELLA LED indicators have integrated electronics for
failure control. The indicators monitor themselves. They generate
an impulse that is evaluated by the electronic ballast. This
ballast simulates a 21W bulb which means it can be used with
conventional indicators.
Safe conversion to LED indicators is now possible using
patented HELLA electronics
HELLA supplies electronic ballasts for all HELLA LED indicators
which make it possible to retrofit the indicator failure display on
various vehicles. This is necessary if the vehicle manufacturer
does not guarantee an indicator bulb failure check via the vehicle's
electrical system.
The method is patented by HELLA. There are currently three
different ballasts and several different LED indicators available.
If just a single LED fails, the light is faulty and the pulse is no
longer generated. In this case, the ballast switches off bulb
simulation and the indicator reports the fault to the driver.
LED-light failure check and correct electrical connection
Operation of the LED light with AC voltage or synchronised DC voltage is not
permitted. The individual light functions may only be operated with a vehicle fuse of
max. 3 A.
Due to the low watt output of LED lights, which are distinctly different from a bulb
version, problems can arise in bulb failure control when operating traction vehicles.
As the indicator check is required by law, we recommend operating the light only in
conjunction with the indicator control unit, HELLA part no. 5DS 009 552-... .
Some traction vehicles also detect other light functions. This is a vehicle convenience
function that is not required by law and does not exempt the driver from his or her
obligation to visually inspect the lighting equipment. Even in this case, low outputs
can lead to misdiagnoses (instrument panel in the cab shows a light failure even
though it is working fine).
Should misdiagnoses occur, as described above, while operating your traction
vehicle, please contact the traction vehicle manufacturer.
FRONT LIGHTING
DynaView® Evo2
Page
11
Daytime running lights
Page
12 – 15
90 mm low beam headlights and
spotlights
Page
16 – 22
90 mm fog lights and daytime running
lights
Page
23
50 mm headlights
Page
24
Micro DE headlights
Page
25
Indicator and position lights
Page
26 – 29
Headlight cleaning systems
Page
30
Ultrasonic headlight range adjustment
Page
31
10 | 11
DynaView® Evo2
A new lighting era
DynaView® Evo2 combines the cornering light and fog light
safety functions in compact round auxiliary lights, which can be
universally installed in many different vehicles. When the low
beam is switched on, the right or left cornering light is activated
automatically and immediately when the indicator is actuated or
when the vehicle drives round a bend at a speed of less than 40
km/h.
A yaw rate sensor measures the vehicle's angular acceleration
and triggers the turn-on signal when the car drives through a
curve. At the end of the curve, a dimmer softly fades the extra
light. If the reverse gear is engaged, both cornering lights are
switched on and ensure broad and bright illumination of the areas
along the left and right of the vehicle.
“The cornering light is
switched off during normal
driving situations on a straight
stretch of road.”
“When turning a corner or
driving slowly through a curve
(up to a speed of 40 km/h),
the cornering light is turned on
automatically.”
“When driving round a bend
up to a speed of 40 km/h,
the respective headlight is
switched on automatically.”
“In foggy conditions, the
cornering light can be switched
on manually (both sides) as a
fog light.”
DynaView® EVO2 INC. H7 BULB
with holding bracket, 12 V
Set inc. control electronics and harness
1N0 009 295-801
individual left
1N0 009 295-011
individual right
1N0 009 295-021
Type approval
1951,
ECE R119 cornering light,
ECE R19 fog light B series 02 / B series 03
CONNECTOR PLUG SET
DynaView® Evo2
for 20 headlights
8JD 156 151-807
Harness
8KB 163 160-801
Control electronics
5DF 009 244-007
Daytime running lights
Advantages of the daytime running light
The daytime running light provides a decisive safety advantage in
road traffic and reduces the number of accidents which result in
serious injuries by 58%.*
For this reason, and long before the introduction of any legal
requirement, HELLA developed daytime running lights to increase
driving safety.
* Study carried out by the SWOV-Institute for Road Safety Research on behalf of the EU.
Daytime running lights are safer than low beams.
The HELLA daytime running lights generate a passively radiating
white signal light. This enables the vehicle to be seen earlier and
better by other road-users. HELLA thus ensures extra reaction
time and offers a noticeable safety advantage.
Performance comparison of low beams and daytime running lights
Low beams during the day
Daytime running light with bulbs
Daytime running light with LEDs
0,207
0,15
90 %
Saving and
4-times more light!
90 %
0,052
Saving and
4-times more light!
0,036
0,021
0,014
Petrol passenger car
Source: BAST (Bundesanstalt für Straßenwesen = German Road Traffic Authority)
Diesel passenger car
12 | 13
These LED products have the following characteristics
Additional features are shown separately ( )
LED DAYTIME RUNNING LIGHT SET, ROUND DESIGN
2 lights including harness, universal bracket,
3 high-performance LEDs per light, multi-voltage 9-33 V
12 V/5.5 W, current consumption = approx. 2.18 A
Set for surface-mounting
2PT 009 599-811
Universal carrier frame
9AH 165 968-001
Harness, pre-assembled
8KA 165 959-001
Type approval
2372
LED DAYTIME RUNNING LIGHT SET, RECTANGULAR DESIGN
2 lights including harness, universal bracket,
3 high-performance LEDs per light, multi-voltage 9-33 V
12 V/5.5 W, current consumption = approx. 2.18 A
Set for surface-mounting
2PT 009 496-801
Individual light without bracket,
DRL with PO function
2PT 009 496-007
Type approval
2344
83 MM LED-3 FUNCTIONAL LIGHT
pre-wired with 2.5 m sheathed four-core cable
2BE 980 691-101
Individual light
Type approval
03 1962
5854 and
Indicator ECE Reg. No. 6
Position light ECE Reg. No. 7
Daytime running light ECE Reg. No. 87
Optional accessory - 90 mm adapter ring
The adapter ring is used to replace a 90 mm light with the 83 mm light. This means
that vehicles equipped with a HELLA 90 mm light can be easily converted to 83 mm
lights.
9GD 980 696-001
FRONT LIGHTING
These LED products have the following characteristics
Additional features are shown separately ( )
LED DAYTIME RUNNING LIGHT SET LEDayLine®
WITH POSITION LIGHT FUNCTION
2 lights with five LED diodes per light and integrated relay for fully automatic switchon, inc. professional harness and attachment material,
multi-voltage 9-32 V, 12 V max. 5.5 W
Set for surface-mounting, 12 V
2PT 010 043-801
12 V, left
2PT 010 043-011
2PT 010 043-021
12 V, right
Type approval
2578
VEHICLE-SPECIFIC FINISHER, BLACK
(ONLY DAYTIME RUNNING LIGHT)
Suitable for Fiat Ducato, Citroёn Jumper, and Peugeot Boxer. Inc. connection harness,
assembly material instructions.
2PT 010 043-811
15°
LED DAYTIME RUNNING LIGHT SET LEDayLine 15
for horizontal installation, with 2.5 m connecting cable and separate changeover relay
for automatically turning daytime running lights on and off or for switching over to
position light.
Set includes:
2 lights each with 8 LEDs, changeover relay, inc. mounting frame.
12 V daytime running light
2PT 980 860-801
Individual light
12 V daytime running light with position light
2PT 980 860-001
Bracket set
8HG 980 864-101
Harness assembly / control unit
8KA 959 186-101
30°
LED DAYTIME RUNNING LIGHT SET LEDayLine 30
for horizontal installation, with 2.5 m connecting cable and separate changeover relay
for automatically turning daytime running lights on and off or for switching over to
position light.
Set includes:
2 lights each with 8 LEDs, changeover relay, inc. mounting frame.
12 V daytime running light
2PT 980 850-801
12 V daytime running light with position light
2PT 980 850-811
Individual light
12 V daytime running light with position light
2PT 980 850-001
Bracket set
8HG 980 854-101
Harness assembly / control unit
8KA 959 186-101
Find out more about further variants, legal requirements and fitting regulations at www.daytime-running-light.com or www.hella.com/lightshow.
* When the LEDayFlex is used as a position light, the standard position light must be permanently disabled in accordance with ECE-R 48.
14 | 15
These LED products have the following characteristics
Additional features are shown separately ( )
LED DAYTIME RUNNING LIGHT SET LEDayFlex
The set consists of two pre-wired module chains with five to eight round light modules
as well as two electronic boxes for controlling the daytime running lights, available
with or without position light. The system is connected to the vehicle's electrical
system via a 3-pin AMP supersealed connector.
12 / 24 V multi-voltage
5 LED light modules for daytime running light
2PT 010 458-801
5 LED light modules for daytime running light with position
light
2PT 010 458-811
6 LED light modules for daytime running light
2PT 010 458-821
6 LED light modules for daytime running light with position
light
2PT 010 458-831
7 LED light modules for daytime running light
2PT 010 458-841
7 LED light modules for daytime running light with position
light
2PT 010 458-851
8 LED light modules for daytime running light
2PT 010 458-861
8 LED light modules for daytime running light with position
light
2PT 010 458-871
Type approval
5852
Accessories
Harness (not included)
8KA 165 959-001
LED DAYTIME RUNNING LIGHT SET LEDayFlex II
LEDayFlex II has expanded the system of flexibly connected module chains since 2012.
The two square LED daytime running light chains with five or six pre-wire light
modules make new designs possible.
5 LED light modules
2PT 980 789-851
6 LED light modules
2PT 980 789-861
Type approval ECE
Bracket for screw attachment, above
Included
for 5-module chain (10 units)
8HG 980 797-801
for 6-module chain (12 units)
8HG 980 797-811
Bracket for screw attachment, rear
Optional accessories
for 5-module chain (10 units)
8HG 980 793-801
for 6-module chain (12 units)
8HG 980 793-811
Bracket for screw attachment, front
Optional accessories
for 5-module chain (10 units)
8HG 980 795-008
for 6-module chain (12 units)
8HG 980 795-007
FRONT LIGHTING
Comparison between LED, Halogen and Xenon low beam
LED
PRODUCT IMAGE
DESCRIPTION
Premium
LED low beam
Page 18
HALOGEN
Classic
Halogen low beam
Page 21
Premium
Halogen and
Bi-Halogen®
Low beam
Page 19
Performance
Halogen low beam
Page 20
XENON
Classic
Xenon low beam
Page 21
Classic
Bi-Xenon® Low beam
Page 21
Premium
Bi-Xenon® Low beam
Page 19
LIGHT DISTRIBUTION
16 | 17
Comparison between LED, Halogen and Xenon high beam
LED
PRODUCT IMAGE
DESCRIPTION
Bi-LED high beam
Page 18
HALOGEN
Classic
Halogen high beam
Page 21
Premium
Bi-Halogen® high beam
Page 19
Performance
Halogen high beam
Page 20
XENON
Classic
Xenon high beam
Page 21
Classic
Bi-Xenon® high beam
Page 21
Premium
Bi-Xenon® high beam
Page 20
LIGHT DISTRIBUTION
90 mm Premium LED module
The light colour, which is similar to daylight, offers more safety
and comfortable, fatigue-free driving. Three white high-power
LEDs function as a light source per lighting function. The light
is projected through the 70 mm DE lens homogeneously on the
street.
Exclusive automobiles distinguish themselves through their
cutting-edge technology.
The HELLA LED low beam or low beam/high beam module is
so high-tech that there is technological progress every time it is
switched on, creating visible distance from the mass market.
The service life of the headlight, normally more than 15,000*
real operating hours, offers major cost savings when it comes to
maintenance and repair costs compared to other light systems**.
LED HEADLIGHTS
Maintenance-free module for normally more than 15,000 operating hours,
very homogeneous light and rapid start time, 35 watt power consumption,
no movable parts, passive cooling system, plastic covering pane, vehicle security
system: 5 A, multi-voltage
Mono LED, right-hand traffic
1BL 010 820-001
Mono LED, left-hand traffic
1ML 010 820-011
Bi-LED, right-hand traffic
1AL 010 820-021
Bi-LED, left-hand traffic
1LL 010 820-031
Type approval Mono LED
ES 3159 and LES 3160,
ES 3351 and LES 3352
Bi-LED
Accessories
For failure check
Functional monitoring device, 12 V
5DS 011 630-001
Carrier frame
9AH 169 580-011
Set packaging
(One headlight and one 12 V control unit for functional monitoring)
Mono LED, right-hand traffic
1BL 010 820-801
Mono LED, left-hand traffic
1ML 010 820-821
Bi-LED, right-hand traffic
1AL 010 820-841
Bi-LED, left-hand traffic
1LL 010 820-861
* at about 50°C ambient temperature
** In the ECE R48 area of application, under current law, it is necessary to ensure failure control for a LED headlight in the vehicle's electrical system by suitable measures.
18 | 19
90 mm Premium
High-end illumination. Low beam and high beam from a single headlight module, choice of Xenon or Halogen technology. Pattern-free
glass cover lens. High-quality aluminium reflector. With Xenon, waterproof ballast. Connection using 0.5 metre shielded supply cable with
detachable plug-type connection.
BI-XENON® MAIN HEADLIGHT
FOR LOW BEAM HEADLIGHTS AND SPOTLIGHTS, 12 V
Xenon low beam and high beam in one lamp unit, Xenon low beam only permitted with
headlight range adjustment and lens cleaning system.
Right-hand traffic, D2S, ECE
1AL 009 997-001
Left-hand traffic, D2S, ECE
1LL 009 997-011
1AL 009 997-021
Right-hand traffic, D2S, SAE
Type approval
2484 and
2485
BI-HALOGEN® MAIN HEADLIGHT
FOR LOW BEAM HEADLIGHTS AND SPOTLIGHTS, 12 V
Halogen low beam and high beam in one lamp unit.
Right-hand traffic, H7, ECE
1AL 009 998-001
Left-hand traffic, H7, ECE
1LL 009 998-011
1AL 009 998-021
Right-hand traffic, H9, SAE
Type approval
2484 and
2485
HALOGEN LOW BEAM HEADLIGHT, 12 V
Metal reflectors with clear DE lens. Ideal in combination with the matching spotlights
and fog lights, including light source.
Right-hand traffic, H7, ECE
1BL 009 999-001
Left-hand traffic, H7, ECE
1ML 009 999-011
1BL 009 999-021
Right-hand traffic, H7, SAE
Type approval
2486 and
2487
Info
MODULE ATTACHMENTS
Would you like to combine modules from the Premium and Performance series
without having to commit yourself right at the start of the vehicle design process?
90 mm high beam with PO, 12 V bulb,
Right-hand traffic
1KO 247 043-117
Then use the tried-and-trusted Premium carrier frame structure as a basis.
90 mm high beam wit 12 V bulb,
Right-hand traffic
1KO 247 043-127
Alongside the complete Premium range, the following modules from the
Performance series that are compatible with a Premium carrier frame can also be
used.
90 mm spotlight 12 V bulb,
right-hand traffic
Left-hand traffic
1BL 247 042-177
1ML 247 042-187
Connector for H1 bulb low beam
8JD 156 151-807
PO connector for high beam module
8JD 156 150-807
FRONT LIGHTING
90 mm Performance
Optimised illumination. Modules in enhanced quality for use on long journeys.
With splashwater-proof plug-type connector.
HALOGEN LOW BEAM HEADLIGHT, 12 V
Module headlight with aluminium reflector and clear DE lens behind pattern-free glass
cover lens
Right-hand traffic, H1
1BL 247 042-007*
1BL 247 042-001*
Left-hand traffic, H1
1ML 247 042-027*
Type approval
2397 and
2398
* Right-hand traffic variant can be switched from asymmetrical low beam to
symmetrical light. Left-hand traffic variant can be switched from symmetrical to
asymmetrical.
HALOGEN SPOTLIGHT, 12 V
Module headlight with aluminium FF reflector and pattern-free glass cover lens
with position light, H1
1K0 247 043-007
1K0 247 043-001
without position light
1K0 247 043-017
1K0 247 043-011
Type approval
2397
Info
MODULE ATTACHMENTS
If you have been using Classic modules so far (except Bi-Xenon®), you can easily
upgrade these to Performance modules.
90 mm high beam with PO, 12 V bulb,
Right-hand traffic
1KO 247 043-157
90 mm high beam with 12 V bulb,
Right-hand traffic
1KO 247 043-167
The following Performance modules have the same module attachment
as the Classic module and are therefore compatible and easy to replace – without
having to modify the existing Classic carrier frame structure first.
90 mm spotlight 12 V bulb,
right-hand traffic
Left-hand traffic
1BL 247 042-217
1ML 247 042-227
Connector for H1 bulb low beam (20 units)
8JD 156 151-807
PO connector for high beam module (20 units)
8JD 156 150-807
20 | 21
90 mm Classic
BI-XENON® MAIN HEADLIGHT, 12 V
LOW AND HIGH BEAM IN ONE HEADLIGHT
Module headlight with pattern-free glass cover lens, high-quality metal reflector,
waterproof Xenon electronic ballast, and 1 metre shielded supply cable with detachable
plug-type connections
D2S, right-hand traffic
1AL 008 934-001*
D2S, left-hand traffic
1LL 008 934-011*
SAE (USA)
1AL 008 934-041
Type approval
1677
Accessories for Bi-Xenon®
Plug for ballast (10 units)
8JA 990 295-127
Plug for switching high beam (20 units)
8JD 162 211-801
* Right-hand traffic variant can be switched from asymmetrical low beam to
symmetrical light. Left-hand traffic variant can be switched from symmetrical to
asymmetrical.
LOW BEAM HEADLIGHT, 12 V
Module headlight with magnesium reflectors, clear DE lens and
pattern-free glass cover lens
Xenon low beam headlight
D2 S
1BL 008 194-007
D2 S, SAE (USA)
1BL 008 194-047
Type approval
917
Halogen low beam headlight
H7, right-hand traffic
1BL 008 193-001
H7, left-hand traffic
1LL 008 193-117
1BL 008 193-021
H9, SAE (USA)
Type approval
917
SPOTLIGHT, 12 V
Module headlight with magnesium FF reflectors and pattern-free glass cover lens
Xenon spotlight
with position light
1K0 008 192-007
without position light
1K0 008 192-017
Type approval
917
Halogen spotlight
with position light
1K0 008 191-001
without position light
1K0 008 191-011
with position light, SAE (USA)
1K0 008 191-131
without position light, SAE (USA)
1K0 008 191-051
Type approval
917
FRONT LIGHTING
90 mm Accessories
PREMIUM CARRIER FRAME
coated black
9AH 169 580-011
PERFORMANCE CARRIER FRAME
coated black
9AH 254 228-017
CLASSIC CARRIER FRAME
for low beam headlights and spotlights
9AH 157 659-007
CONNECTOR PLUG SET
Premium, Performance and Classic for Xenon ballasts, Halogen, Bi-Halogen®
and DynaView® Evo2, for 20 headlights
8JD 156 151-807
CONNECTOR PLUG SET
Performance and Classic spotlights with position light, for position light, for 20 headlights
8JD 156 150-807
CLASSIC CONNECTOR PLUG SET
H9 008 191-..., 008 193-..., 009 998-... and for SAE (USA), 20 headlights
8JD 158 175-807
ACTUATOR MOTORS
for headlight range adjustment
Premium – for 12 V Halogen headlights
6NM 007 282-221
Premium – for 12 V Xenon headlights
6NM 007 282-231
Premium – Accessories for actuator assembly
8HG 138 620-007
Classic – for 12 V Xenon headlights
6NM 007 282-231
RUBBER CAPS
for 90 mm Halogen H7, Classic
Low beam headlight 008 193-..., non-ventilated
flat version for angled plugs
9GH 152 654-012
deep version for female connector housing
9GH 145 943-012
RUBBER CAPS
for 90 mm Halogen H7, Classic
Spotlight 008 191-... ventilated
flat version for angled plugs
9GH 152 654-007
deep version for female connector housing
9GH 145 943-001
Halogen H9:
Sealed through connector plug system, no cap required
For information on automated headlight range adjustment and headlight cleaning systems, please refer to pages 28 and 29.
22 | 23
90 mm indicators, position lights, fog lights and daytime running lights
FOG LIGHT 90 MM, 12 V
Minimum installation dimensions for a discreetly convincing lighting design.
Aluminium reflectors with clear lens. Ideal in combination with the matching 90 mm
spotlights and low beam headlights.
1N0 008 582-007
Halogen fog light
Type approval
1342, ECE R19 B Series 02, B Series 03
Accessories
9GH 158 051-007
Rubber cap
90 MM INDICATOR / POSITION LIGHT COMBINATION
Module headlights with pattern-free glass cover lens, 12 V with PY21W silver-coloured
bulb
Indicator / position light
Type approval
2BE 010 102-001
2586
90 MM INDICATOR / POSITION LIGHT COMBINATION
Module headlight with pattern-free glass cover lens, 12 V with P21W Longlife bulb and
Kartoval® LED
with daytime running light/position light
Type approval
2BE 010 102-101
2586, ECE R87, ECE R7
90 MM DAYTIME RUNNING LIGHT / SPOTLIGHT COMBINATION
Module headlight with pattern-free glass cover lens, 12 V with H 15,
55 W / 15 W bulb, with carrier frame.
with daytime running light/high beam
Type approval
1F0 010 293-001
2680, ECE R87, ECE R112
90 MM DAYTIME RUNNING LIGHT / FOG LIGHT COMBINATION
Module headlight with pattern-free glass cover lens, 12 V with H 15,
55 W / 15 W bulb, with carrier frame.
with daytime running light/fog light
Type approval
1N0 010 294-001
2681, ECE R19 B Series 02, B Series 03, ECE R87
FRONT LIGHTING
50 mm Premium
LOW BEAM HEADLIGHT, 12 V
Installation frame for 3-point attachment, adjustable from the front and rear
Xenon
Right-hand traffic, D2S
including D2S Xenon bulb and separate Xenon electronic
ballast
Halogen
Right-hand traffic, H7
Left-hand traffic, H7
Type approval
1903 and
1BL 009 071-047
1BL 009 071-007
1ML 009 071-017
1904
SPOTLIGHT, 12 V
3-point holder, adjustable using setting screw
Xenon
including D2S Xenon bulb and separate Xenon electronic
ballast
rear carrier frame is not included
(see accessories), D2S
95,2
147,6
Type approval
1120
Halogen
H9
Type approval
1F0 008 390-317
1KL 009 486-001
2198
FOG LIGHT, 12 V
3-point holder, adjustable using setting screw, rear carrier frame is not included supply
(see accessories)
1NL 008 090-317
H7
Type approval
877, ECE R19 B Series 02, B Series 03
Accessories
CARRIER FRAME (not for H9 halogen spotlights)
a) without headlight range adjustment holder
9AH 161 786-017
b) with headlight range adjustment holder
9AH 161 784-017
PLASTIC CAP (rubber cap)
a) for halogen low beam headlights
9GH 152 654-007
b) for fog lights
9GH 147 009-007
CONNECTOR PLUG SET
Rubber cap for 20 headlights
8JD 156 150-807
H9 plug for 20 headlights (not shown)
8JD 158 175-807
ACTUATOR MOTORS FOR HEADLIGHT RANGE ADJUSTMENT
for 12 V Halogen
6NM 007 282-221
for 12 V Xenon
6NM 007 282-231
Actuator assembly set
8HG 183 586-001
24 | 25
Micro DE headlights
MICRO DE PREMIUM EDITION: FOG LIGHT
Individual fog lights
with 12 V H3 bulb, aluminium design finisher
1NL 008 090-301
Type approval
877, ECE R19 B Series 02, B Series 03
DE XENON PREMIUM EDITION: XENON SPOTLIGHT
Ref. 17.5, 12 V, black housing colour, inc. D2S Xenon bulb and separate electronic
ballast, aluminium design finisher
Set with harness and relay
1F0 008 390-821
Individual
1F0 008 390-301
Type approval
1120
DE XENON SPOTLIGHT
DE spotlight, with black decorative rings, gas discharge lamps
and 12 V ballast
Set with harness and relay
1F0 008 390-801
Individual
1F0 008 390-001
Type approval
1120
DE FOG LIGHT
Fog light with black decorative ring
Set
1NL 008 090-821
Individual
1NL 008 090-031
Type approval
877, ECE R19 B Series 02, B Series 03
FRONT LIGHTING
These LED products have the following characteristics
Additional features are shown separately ( )
LED POSITION LIGHT
for horizontal surface-mounting, with 500 mm cable, modern night-time design and
high level of safety thanks to maximum illuminated area
2PG 344 690-307
12 V
with cable
Type approval
5853
LED POSITION LIGHT WITH REFLECTOR
for horizontal surface-mounting, with 2 LEDs
12 V/0.3 W, current consumption = approx. 0.03 A
Type approval
2PG 964 295-121*
0301
LED POSITION LIGHT
for horizontal surface-mounting, with 20° adapter base included loose
12 V/0.3 W, current consumption = approx. 0.03 A
Type approval
2PF 964 295-257*
817
LED POSITION LIGHT
for surface-mounting, self-adhesive with 6.3 mm contacts and counterplug grommet
Current consumption = 0.04 A
12 V
2PF 009 226-097
Counterplug grommet (order separately)
9GT 186 597-007
LED POSITION LIGHT
for horizontal or vertical flush-mounting,
12 V/0.5 W, current consumption = approx. 0.04 A
2PF 959 590-401*
with 0.5 m cable, 10 –33 V
Type approval
* Please see the note on pages 8 and 9 regarding LED indicators and the LED indicator failure check.
7597 and
031721
26 | 27
These LED products have the following characteristics
Additional features are shown separately ( )
LED POSITION LIGHT WITHOUT REFLECTOR
for flush-mounting, clear lens, black plastic housing with adhesive film for sticking to
the body. 2-pin cable, 150 mm long, open cable ends,
with 2 white LEDs
12 V/0.6 W, current consumption = approx. 0.05 A
Type approval
2PF 340 825-041*
11371
MODULAR LED LIGHT, 55 MM DIAMETER
for front flush-mounting, patterned clear lens and 500 mm connection cable
Indicator
2BA 011 172-001/-007
Indicator**
2BA 011 172-011/-017
in preparation
Position light with heat sink
Type approval BL
3284 and CCC
PREMIUM LED LIGHT, 60 MM DIAMETER
Position light, for flush-mounting,
with 12 LEDs
Type approval
2PF 009 001-421*
ECE
SAE
(USA)
X
■
12390
83 MM LED-3 FUNCTIONAL LIGHT
pre-wired with 2.5 m sheathed four-core cable
2BE 980 691-101
Individual light
Type approval
03 1962
5854 and
Indicator ECE Reg. No. 6
Position light ECE Reg. No. 7
Daytime running light ECE Reg. No. 87
Optional accessory - 90 mm adapter ring
The adapter ring is used to replace a 90 mm light with the
83 mm light. This means that vehicles equipped with a
HELLA 90 mm light can be easily converted to 83 mm
lights.
* Please see the note on pages 8 and 9 regarding LED indicators and the LED indicator failure check.
** With pulse for indicator failure check
9GD 980 696-001
FRONT LIGHTING
POSITION LIGHT WITH REFLECTOR
for horizontal or vertical flush-mounting,
with pre-fitted 12 V/3 W bulb
12 V
2PG 962 964-041
Seal (order separately)
9GD 963 281-001
9GT 963 129-001
Grommet (order separately)
Type approval
7499 and
3153
POSITION LIGHT WITH REFLECTOR
for horizontal flush-mounting,
with pre-fitted 12 V/5 W bulb and seal
2PG 964 295-011
12 V
POSITION LIGHT WITHOUT REFLECTOR (not shown)
for horizontal or vertical flush-mounting
2PF 964 295-021
12 V
Type approval
9806 and
811
POSITION LIGHT
for surface-mounting, clear lens, 2 x M5 fastening screws
2PF 001 259-631
12 V
Intermediate piece
for surface-mounting at 45° (order separately)
Type approval
8HG 002 247-001
21624
INDICATOR
with fitted amber 12 V/21 W bulb
Type approval
2BA 008 221-107
878
POSITION LIGHT
2PF 008 221-011
for 12 V/5 W bulb
Type approval
879
Accessories for light series 008 221-...
Harness with grommet
8KA 152 134-007
Grommet separate
9GT 137 236-007
28 | 29
A) CHROME-PLATED CIRCULAR FINISHER
suitable for light series 008 221-... and 011 172-...
8XU 008 405-031
for surface-mounting
a)
b)
LED POSITION LIGHT
for surface-mounting, suitable for light series 008 221-... and 011 172-...
12 V/1.8 W, current consumption = approx. 0.15 A
2PF 008 405-061*
with 12 LEDs
Type approval
1696
PREMIUM LIGHTS, 60 MM DIAMETER
ECE
12 V / 21 W, with clear lens, indicator with ...
amber bulb
2BA 009 001-071
amber bulb
2BA 009 001-091
silver-coloured bulb
2BA 009 001-201
Position light
2PF 009 001-081
with P21/5 W bulb
Type approval
6546 and
SAE
(USA)
X
■
X
ECE
SAE
(USA)
X
■
ECE
SAE
(USA)
7613
INDICATOR/POSITION LIGHT, 90 MM DIAMETER
12 V
Indicator with amber bulb
2BA 965 039-061
X
■ ●
Position light
2PF 965 039-071
X
■ ●
ECE
SAE
(USA)
■ ●
Type approval
10215
OVAL LIGHT SERIES
12 / 24 V, for horizontal or vertical surface-mounting, with grommet.
Attention:
Depending on the installation position, the water drain opening must
be broken out.
Indicator,
without bulb
2BA 343 130-057
X
Indicator/position light,
without bulb
2BE 343 130-007
X
Type approval
* Please see the note on pages 8 and 9 regarding LED indicators and the LED indicator failure check.
■ SAE type approval for vehicles < 2,032 mm wide
● SAE type approval for vehicles < 2,031 mm wide
6550 and
10202
Headlight cleaning systems
Legislation prescribes the use of a headlight cleaning system when Xenon low beam headlights are used.
(The system can also be used for halogen headlights and high beam.)
HELLA cleaning systems work according to the water jet principle, which manages without wipers and brushes by using the kinetic
energy from thick water drops to loosen and rinse away dirt particles from the lens.
Ø 50 MM
Ø 90 MM
Ø 90 MM
1BL 009 071-…
1KO 008 191-...
1LL 009 997-...
1ML 009 071-…
1KO 008 192-...
1BL 010 820-...
1F0 008 390-…
1BL 008 193-...
1ML 010 820-...
1BL 008 194-...
1BL 247 042-...
1AL 009 997-...
1ML 247 042-...
1LL 009 997-...
1KO 247 043-...
These headlight cleaning systems are ECE type-approved for the following HELLA headlight series when installed in accordance with the enclosed assembly instructions.
WITH FIXED NOZZLES
12 V
WITH TELESCOPIC INDIVIDUAL NOZZLES
8WS 008 549-001
12 V
8WT 008 549-101
WITH TELESCOPIC DOUBLE NOZZLES
12 V
8WT 008 549-201
30 | 31
Ultrasonic headlight range adjustment
The ultrasonic system is a headlight range
adjustment system for 50 mm and 90 mm
headlight modules for original equipment and
upgrades for vehicles with Xenon headlights.
ULTRASONIC SYSTEM FOR HEADLIGHT RANGE ADJUSTMENT – OVERVIEW
The sensor in this system measures the
distance from the vehicle undercarriage to the
road and forwards the signal to the central
control unit, which then optimally adjusts the
headlights via the actuator motors on the
Xenon headlights.
Control unit
For more detailed information, see assembly
instructions.
Rear sensor
Adjustment cable
Parking lights
Ground
optional:
front sensor
H/L actuator
HEADLIGHT RANGE ADJUSTMENT
12 V, one sensor (passenger car)
8XX 010 315-001
12 V, one sensor (3.5 t)
8XX 010 315-101
REAR LIGHTING
Combination rear lights
Page
33 – 45
Clearance lights
Page
46 – 48
Auxiliary stop lights
Page
49 – 50
Reflectors
Page
50 – 51
License plate lights
Page
52 – 53
32 | 33
CARALUNA II PLUS COMBINATION REAR LIGHT
for horizontal flush-mounting, with 12 V bulbs, triangular reflector
and combined indicator and reverse light module, can also be used
as an upgrade of the basic version 2.. 343 419-...
ECE
Left
2VP 343 590-017

X
Right
2VP 343 590-027

X
Type approval
SAE
(USA)
9836
CARALUNA II PLUS CHROMIUM COMBINATION REAR LIGHT
for horizontal flush-mounting, with 12 V brilliant-finish bulbs,
triangular reflector and combined indicator and reverse light
module, can also be used as an upgrade of the basic version
2.. 343 419-..., without side marker reflector light
ECE
Left
2VP 343 590-057

X
Right
2VP 343 590-067

X
Type approval
SAE
(USA)
10217
CARALUNA II CHROMIUM COMBINATION REAR LIGHT
for horizontal flush-mounting, with 12 V brilliant-finish bulbs,
without side marker reflector light
ECE
SAE
(USA)
with triangular reflector
Left
2VA 341 419-097

X
Right
2VP 341 419-107

X
Left
2VP 341 419-157

X
Right
2VA 341 419-167

X
Left
2VA 341 419-077

X
Right
2VP 341 419-087

X
Left
2VP 341 419-177

X
Right
2VA 341 419-187

X
with round reflector
Type approval
10217
CARALUNA II COMBINATION REAR LIGHT
for horizontal flush-mounting, with 12 V bulbs
ECE
SAE
(USA)
with triangular reflector
Left
2VA 341 419-011

X
X■●
Right
2VA 341 419-021

X
X■●
Left
2VA 341 419-117

X
X■●
Right
2VA 341 419-147

X
X■●
Right
2VP 341 419-127

X
X■●
Left
2VP 341 419-137

X
X■●
with round reflector
Type approval
9836
■ SAE type approval for vehicles < 2,032 mm wide
● SAE type approval for vehicles < 2,031 mm wide
 Taillight
 Stop light
 Reflectors
 Side marker light with reflector
 Indicator
 Rear fog light
 Back-up light
 Licence plate light
‰ Position light
REAR LIGHTING
CARALUNA VERTICAL
ECE
for vertical flush-mounting, with 12 V bulbs
SAE
(USA)
Right-hand traffic
Left
2SD 343 440-017

X
Right
2SK 343 440-027

X
Left
2SK 343 440-037

X
Right
2SD 343 440-047

X
Left-hand traffic
Type approval
0501
MODULAR CARALUNA COMBINATION REAR LIGHT
for vertical flush-mounting, with 12 V bulbs, with combined indicator
and reverse light module and with integrated red side marker light
ECE
SAE
(USA)
Red lens
Left
2VP 343 520-017

X
Right
2VP 343 520-027

X
Left
2VP 343 520-057

X
Right
2VP 343 520-067

X
Clear lens
Type approval
12677
REAR LIGHT
12 V, for horizontal flush-mounting, brilliant finish
ECE
SAE
(USA)
2SA 008 805-007

X
X■●
for double attachment
2DA 008 805-017

X
X■●
for double attachment
2SB 008 805-027

X
X■●
2NE 008 805-037

X
with clear lens
2ZR 008 805-047

X
for double attachment,
with clear lens
2BA 008 805-057

X
Type approval
10151
X■●
34 | 35
These LED products have the following characteristics
Additional features are shown separately ( )
LED TAIL STOP LIGHT
for horizontal flush-mounting, with brilliant-finish clear lens
12 V / 3 W,
current consumption = approx.
0.25 A
Type approval
2SB 008 982-367
ECE
SAE
(USA)
X

10880
LED INDICATOR
for horizontal flush-mounting, with brilliant-finish clear lens
12 V / 2 W,
current consumption = approx.
0.17 A
Type approval
2BA 008 982-347
ECE
SAE
(USA)
X

10880
LED TAILLIGHT STOP LIGHT DIRECTION INDICATOR
for horizontal or vertical surface-mounting, with 24 LEDs, clear lens,
with ECE and EMC type approval
Taillight: 12 V/0.5 W, current consumption = approx. 0.04 A
Stop light: 12 V/1 W, current consumption = approx. 0.08 A
Direction indicator: 12 V/1.5 W, current consumption = approx. 0.125 A
Multi-voltage 9 – 32 V,
With 200 mm cable and 4-pin AMP plug 282 106-1 for
mating plug AMP 282 088-1 to be used
2SD 343 910-017*
With integrated AMP plug 282 106-1
in the housing
2SD 343 910-027*
Type approval
12393 and
035109
* Please see the note on pages 8 and 9 regarding LED indicators and the LED indicator failure check.
■ SAE type approval for vehicles < 2,032 mm wide
● SAE type approval for vehicles < 2,031 mm wide
 Taillight
 Stop light
 Reflectors
 Side marker light with reflector
 Indicator
 Rear fog light
 Back-up light
 Licence plate light
‰ Position light
REAR LIGHTING
These LED products have the following characteristics
Additional features are shown separately ( )
LED TAILLIGHT STOP LIGHT DIRECTION INDICATOR
for surface-mounting, redesign of series 964 169, 24 LEDs
Taillight: 12 V/1 W, current consumption = approx. 0.08 A
Stop light: 12 V / 2 W, current consumption = approx. 0.17 A
Direction indicator: 12 V / 2 W, current consumption = approx. 0.17 A
with clear lens
with red / clear lens
Type approval
12371,
ECE
2SD 344 200-001*

X
2SD 344 200-071*

X
12658 and
SAE
(USA)
03 4895
LED TAIL STOP LIGHT
for surface-mounting
Taillight: 12 V/1 W, current consumption = approx. 0.08 A
Stop light: 12 V / 3 W, current consumption = approx. 0.25 A
ECE
with clear lens
2SB 344 200-027*

X
with red lens
2SB 344 200-081*

X
Type approval
12658 and
SAE
(USA)
03 4895
LED INDICATOR
for rear surface-mounting
Direction indicator: 12 V / 3 W, current consumption = approx. 0.25 A
2BA 344 200-037*
with clear lens
Type approval
12658 and

ECE
SAE
(USA)
X
03 4895
LED REAR FOG LIGHT
for surface-mounting
Rear fog light: 12 V / 2 W, current consumption = approx. 0.17 A
ECE
with clear lens
2NE 344 200-061*

X
with red lens
2NE 344 200-091*

X
Type approval
14198 and
03 4895
SAE
(USA)
36 | 37
These LED products have the following characteristics
Additional features are shown separately ( )
LED REVERSE LIGHT
for surface-mounting
Reverse light: 12 V / 2 W, current consumption = approx. 0.17 A
2ZR 344 200-051*
Type approval
14198 and
ECE
SAE
(USA)
X

03 4895
TAILLIGHT STOP LIGHT DIRECTION INDICATOR
ECE
Lens
glass-clear
2SD 344 200-201

X
glass-clear
2SD 344 200-207

X
red / clear
2SD 344 200-211

X
red / clear
2SD 344 200-217

X
red/amber
2SD 344 200-251

X
red/amber
2SD 344 200-257

X
Type approval
12371 and
SAE
(USA)
03 0235
TAILLIGHT/STOP LIGHT
ECE
Lens
glass-clear
2SB 344 200-221

X
glass-clear
2SB 344 200-227

X
red
2SB 344 200-231

X
red
2SB 344 200-237

X
Type approval
12658 and
SAE
(USA)
03 0235
INDICATOR
ECE
Lens
glass-clear
2BA 344 200-241

X
glass-clear
2BA 344 200-247

X
Type approval
12658 and
03 0235
* Please see the note on pages 8 and 9 regarding LED indicators and the LED indicator failure check.
■ SAE type approval for vehicles < 2,032 mm wide
● SAE type approval for vehicles < 2,031 mm wide
 Taillight
 Stop light
 Reflectors
 Side marker light with reflector
 Indicator
 Rear fog light
 Back-up light
 Licence plate light
‰ Position light
SAE
(USA)
REAR LIGHTING
These LED products have the following characteristics
Additional features are shown separately ( )
MODULAR LED LIGHT, 55 MM DIAMETER
for rear flush-mounting, patterned clear lens and 500 mm connection cable
12 V
2BA 011 172-021/-027

12 V
2BA 011 172-031/-037**

12 V
2SA 011 172-041/-047

12 V
2DA 011 172-061/-067

Type approval
3283, CCC
MODULAR LED LIGHT, 55 MM DIAMETER
for rear flush-mounting, patterned clear lens and 500 mm connection cable
2NE 011 172-081/-087
Type approval

3286, CCC
MODULAR LED LIGHT, 55 MM DIAMETER
for rear flush-mounting, back-up light, patterned clear lens and
500 mm connection cable
2ZR 011 172-101/-107
Type approval
3285, CCC
1) LED taillight / clearance light, 12 V
for flush-mounting, with 12 red LEDs,
clear lens, 1.8 W
2SA 008 405-021*
2PF 008 405-061
1) LED position light, 12 V
Type approval
1197,
1196 and
1892
1)
2)
3)
1) LED taillight / stop light, 12 V
for flush-mounting, with 12 red LEDs,
clear lens, 2.1 W
Type approval
1197,
1196 and
2SB 008 405-101*
1892
8XU 008 405-031
2) Chrome-plated finisher, 12 V
8RA 008 405-001
3) Reflector, 12 V
Type approval
1197,
1196 and
1892

38 | 39
COMBINATION REAR LIGHTS
a) for flush-mounting with red lens
a, c
12 / 24 V
2XA 008 221-021

with fitted 12 V / 5 W bulb
2SA 008 221-127

12 / 24 V
2XA 008 221-021

with fitted 12 V / 21 W bulb
2DA 008 221-167

12 / 24 V
2BA 008 221-041

with fitted 12 V/21 W amber bulb
2BA 008 221-147

12 / 24 V
2NE 008 221-031

with fitted 12 V / 21 W bulb
2NE 008 221-137

12 / 24 V
2ZR 008 221-051

with fitted 12 V / 21 W bulb
2ZR 008 221-157

Type approval
b, d
1048 and
1049
b) for flush-mounting with grey lens
Type approval
1051,
878 and
879
c) for flush-mounting with red lens
Type approval
1050
d) for flush-mounting with grey lens
Type approval
1052
Accessories for light series 008 221-...
Harness with grommet
8KA 152 134-007
Grommet separate
9GT 137 236-007
Examples of combination possibilities
1)
1) Rear lighting
2BA 008 221-041
and
2SA 008 405-021

2) Rear lighting
2XA 008 221-021
and
8RA 008 405-001

Heat baffle plate (required at ambient
temperature > 50°C)
9XB 161 749-007
2)
* Please see the note on pages 8 and 9 regarding LED indicators and the LED indicator failure check.
** With pulse for indicator failure check
■ SAE type approval for vehicles < 2,032 mm wide
● SAE type approval for vehicles < 2,031 mm wide
 Taillight
 Stop light
 Reflectors
 Side marker light with reflector
 Indicator
 Rear fog light
 Back-up light
 Licence plate light
‰ Position light


REAR LIGHTING
This LED product has the following characteristics
PREMIUM LED LIGHT, 60 MM DIAMETER
ECE
with clear lens
12 V
2SB 009 001-401

X
12 V
2BA 009 001-411*

X
12 V
2BA 009 001-431**

X
Type approval
SAE
(USA)
12390
60 MM PREMIUM LIGHTS
ECE
with pre-fitted bulbs 12 V, inc. design ring
SAE
(USA)
Red lens
2SA 009 001-047

X
Red lens
2DA 009 001-057

X
Red lens
2SB 009 001-067

X
Grey lens
2BA 009 001-007

X
with Silvervision bulb
2BA 009 001-191

X
Red lens
2NE 009 001-027

X
X
Grey lens
2ZR 009 001-017

X
X

X
X
Type approval
3917,
Macro reflector, 12 V, red
Type approval
6546,
7613 and
23255
8RA 009 001-037
3189
DESIGN RING
suitable for 60 mm light modules with Ø 71.6 mm
(Part number ... 009 001-... except LED versions),
perfect high-sheen finish with one “click”
high-sheen chrome-plated
9HB 161 122-012
silver
9HB 161 122-007
Premium silver
9HB 164 168-002
Combination example
for a combination rearlight
... 009 001-...
with design ring Ø 71.6 mm high-sheen chrome-plated
9HB 161 122-012
40 | 41
These LED products have the following characteristics
Additional features are shown separately ( )
COMBINED LED TAILLIGHT STOP LIGHT INDICATOR
for rear surface-mounting, clear lens, with 24 red LEDs, suitable for
light series 009 362-..., 009 001-...
12 V/4.8 W, current consumption = approx.
0.4 A
ECE
2SD 009 362-201*
SAE
(USA)
■●
LED CIRCULAR MODULES
ECE
available with a choice of clear or red cover lens
Red lens
2SB 009 362-041*

X
Clear lens
2SB 009 362-021*

X
Red lens
8RA 009 362-001

X
Type approval
7747 and
SAE
(USA)
7748
DESIGN RING Ø 118 MM
suitable for ring module 009 362
perfect high-sheen finish with one “click”
high-sheen chrome-plated
9HB 163 085-012
silver
9HB 163 085-001
ACCESSORIES FOR 60 MM COMBINATION REAR LIGHTS
Adapter ring for
frontal screw attachment for combination rear lights Ø
60 mm, direct assembly and assembly in circular module,
black
9XD 161 119-007
Adapter ring
to attach LED lights or the reflector in the circular module
series 009 362-..., black (not shown)
9XD 161 119-017
* Please see the note on pages 8 and 9 regarding LED indicators and the LED indicator failure check.
** With pulse for indicator failure check
■ SAE type approval for vehicles < 2,032 mm wide
● SAE type approval for vehicles < 2,031 mm wide
 Taillight
 Stop light
 Reflectors
 Side marker light with reflector
 Indicator
 Rear fog light
 Back-up light
 Licence plate light
‰ Position light
REAR LIGHTING
REAR LIGHT
12 V, for surface or flush-mounting, brilliant finish
ECE
SAE
(USA)
2BA 964 169-507
653

X
X■●
2SB 964 169-537
816

X
X■●
2ZR 964 169-517
2312

X
X■●
2NE 964 169-527
3809

X
REAR LIGHT
12 V for surface- or flush-mounting.
Depending on the installation position, the water drain opening must
be broken out.
ECE
SAE
(USA)
2DA 964 169-001
808

X
X■●
2BA 964 169-011
648

X
X■●
2NE 964 169-021
3808

X
X■●
2ZR 964 169-031
2311

X
X■●
2BA 964 169-041
9804

X
2BN 964 169-051
9801

X
X■
2TA 964 169-061
9805

X
X■
2BE 964 169-071**
9802
‰
X
2SW 964 169-081
9803

X
X■
2SA 964 169-091
810

X
X■●
2SD 964 169-111
9903

X
2TA 964 169-147
■

2SB 964 169-287
815

X
X■●
ECE
SAE
(USA)
** indicator / position light for front surface-mounting
COMBINATION REAR LIGHT Ø 90 MM
for flush-mounting, with fitted bulbs, reverse light and rear
indicators with smoked glass lens, also available as daytime running
light
Attachment possible from the front using the enclosed clips or
from the rear using screws
12 V
2SA 965 039-001

X
X■●
12 V
2DA 965 039-011

X
X■
12 V
2BA 965 039-021/7

X
X■
12 V
2NE 965 039-031/7

X
X■●
12 V
2ZR 965 039-041/7

X
X■●
12 V
2SB 965 039-051/7

X
X■
12 V
2SA 965 039-307

X
X■●
12 V
2DA 965 039-317

X
X■
12 V
2BA 965 039-347

X
X■
12 V
2NE 965 039-327

X
X■●
12 V
2ZR 965 039-337

X
X■●
2SB 965 039-357

X
X■
with mounted attachment clips
12 V
Type approval
10215
42 | 43
“OVAL” COMBINATION REAR LIGHT - BRILLIANT-FINISH APPEARANCE
suitable for horizontal and vertical flush- and surface-mounting,
right or left (= turn light through 180°),
can be used for 12 V and 24 V operation,
before mounting, break out the water drain hole and insert seal,
black housing, clear cover lens
ECE
SAE
(USA)
2SB 343 130-021/7
7698

X
■●
2BA 343 130-051/7
6550

X
■●
2NE 343 130-031/7
3919

X
2ZR 343 130-041/7
23257

X
■●
ECE
SAE
(USA)
“OVAL LIGHT” COMBINATION REAR LIGHT
for horizontal or vertical flush-mounting,
lens with stripe pattern,
housing with black edging all the way round,
completely pre-fitted, with 100 mm cable
and pre-fitted 12 V bulb
Left
2SA 343 400-217
823

X
Right
2SA 343 400-227
823

X
Left
2DA 343 400-237
821

X
Right
2DA 343 400-247
821

X
Left
2ZR 343 400-297
2314

X
Right
2ZR 343 400-307
2314

X
Left
2NE 343 400-277
3812

X
Right
2NE 343 400-287
3812

X
Left
2BA 343 400-257
655

X
Right
2BA 343 400-267
655

X
Left
2SB 343 400-317
822

X
Right
2SB 343 400-327
822

X
* Please see the note on pages 8 and 9 regarding LED indicators and the LED indicator failure check.
** With pulse for indicator failure check
■ SAE type approval for vehicles < 2,032 mm wide
● SAE type approval for vehicles < 2,031 mm wide
 Taillight
 Stop light
 Reflectors
 Side marker light with reflector
 Indicator
 Rear fog light
 Back-up light
 Licence plate light
‰ Position light
REAR LIGHTING
These LED products have the following characteristics
Additional features are shown separately ( )
"OVAL" LED COMBINATION REAR LIGHT
for horizontal and vertical surface-mounting, clear lens, 24 LEDs,
can be used on the right and left, can be turned through 180°, 2
bodywork fastening screws (diagonal arrangement) with 100 mm
harness, multi-voltage 9–32 V
2SD 343 390-011*
ECE

X

X

X
SAE
(USA)
12 red LEDs for stop light:
12 V / 1 W, current consumption = approx. 0.08 A
12 red LEDs for stop light (reduced power):
12 V / 0.2 W, current consumption = approx. 0.02 A
12 amber LEDs for indicator
12 V / 1.5 W, current consumption = approx. 0.13 A
2BA 343 390-071*
24 amber LEDs for indicator
12 V / 1.5 W, current consumption = approx. 0.13 A
2SB 343 390-091*
Stop light: 12 V / 1 W, current consumption = approx. 0.08 A
Taillight: 12 V/0.2 W, current consumption = approx. 0.02 A (reduced power)
"OVAL" LED COMBINATION REAR LIGHT
only for vertical flush-mounting, with 24 LEDs, 12 red LEDs for stop
light, with 4-pole DEUTSCH plug integrated in the housing
ECE
2SD 343 390-401*
X
2SD 343 390-407*
X
12 red LEDs for stop light:
12 V / 1 W, current consumption = approx. 0.08 A
12 red LEDs for stop light (reduced power):
12 V / 0.2 W, current consumption = approx. 0.02 A
12 amber LEDs for indicator
12 V / 1.5 W, current consumption = approx. 0.13 A
SAE
(USA)
44 | 45
These LED products have the following characteristics
Additional features are shown separately ( )
EUROLED
1 Power LED, for surface-mounting, cast in one piece with the black
base plate, electrical connection through cable 2,500 mm long
ECE
SAE
(USA)
12 V/2.5 W, current consumption = approx. 0.21 A
(SAE versions on request)
2SB 959 821-601*
Red lens

X

X
12 V/4 W, current consumption = approx. 0.33 A
2NE 959 821-201*
Clear lens
Type approval
10208
EUROLED
1 Power LED, for surface-mounting, cast in one piece with the black
base plate, electrical connection through cable 2,500 mm long
ECE
SAE
(USA)
12 V/5 W, current consumption = approx. 0.42 A
2ZR 959 820-601*
Clear lens
Type approval
X

10208
EUROLED
1 Power LED, for surface-mounting, cast in one piece with the black
base plate, electrical connection through cable 2,500 mm long
ECE
12 V/2.5 W, current consumption = approx. 0.21 A
(SAE versions on request)
2BA 959 822-601**
Type approval

10208
* Please see the note on pages 8 and 9 regarding LED indicators and the LED indicator failure check.
** With pulse for indicator failure check
■ SAE type approval for vehicles < 2,032 mm wide
● SAE type approval for vehicles < 2,031 mm wide
 Taillight
 Stop light
 Reflectors
 Side marker light with reflector
 Indicator
 Rear fog light
 Back-up light
 Licence plate light
‰ Position light
X
SAE
(USA)
REAR LIGHTING
CLEARANCE LIGHT
for vertical surface-mounting, red/white with grey base plate
left, with 12 V bulb
2XS 008 479-001
right, with 12 V bulb
2XS 008 479-011
left, without bulb
2XS 008 479-061
right, without bulb
2XS 008 479-071
Type approval
1201
CLEARANCE LIGHT
for vertical surface-mounting, red with grey base plate, PO function silver-coloured,
opaque
2XS 008 479-107
Left
2XS 008 479-117
Right
Type approval
1201
CLEARANCE LIGHT
for vertical surface-mounting, red/white with white base plate
2XS 008 479-081
Left
2XS 008 479-091
Right
Type approval
1201
CLEARANCE LIGHT
with pre-fitted 12 V bulb and seal,
for horizontal or vertical flush-mounting
2XS 964 295-031
oval
Type approval
812
46 | 47
These LED products have the following characteristics
Additional features are shown separately ( )
LED CLEARANCE LIGHT
for vertical surface-mounting, red/white with black base plate
Versions with grey base plate on request!
Screw attachment, AMP Superseal
2XS 205 020-001
Rubber pendulum and angled bracket, AMP Superseal
2XS 205 020-021
Screw attachment, 500 mm cable
2XS 205 020-041
Rubber pendulum, AMP Superseal
2XS 205 020-121
LED CLEARANCE LIGHT
for horizontal surface-mounting, with 2 LEDs, self-adhesive, with 6.3 mm contacts and
counterplug grommet
2XS 009 226-107
LED CLEARANCE LIGHT
for horizontal surface-mounting, 2 LEDs, 12 V with seal and cable 5,000 mm long
12 V / 0.5 W, current consumption = approx. 0.04 A
2TM 964 295-101*
oval
Type approval
0302
LED CLEARANCE LIGHT
for surface-mounting, modern night-time design and high level of safety thanks to
maximum illuminated area, 12 V
2TM 344 690-357
500 mm cable, horizontal
Type approval
* Please see the note on pages 8 and 9 regarding LED indicators and the LED indicator failure check.
7597 and
031721
REAR LIGHTING
These LED products have the following characteristics
Additional features are shown separately ( )
LED CLEARANCE LIGHT
for horizontal surface-mounting, 2 LEDs, 8 –28 V
12 V / 0.5 W, current consumption = approx. 0.04 A
2XA 959 560-401*
500 mm cable
2XA 959 560-411*
5,000 mm cable
Type approval
7574 and
031721
LED CLEARANCE LIGHT
for horizontal or vertical surface-mounting, with 2 LEDs and light guide strip in red,
2 screw holes ø 5.4 mm for fastening screws
12 V / 0.7 W, current consumption = approx. 0.06 A
2XS 008 078-011*
12 V
Type approval
0515
LED CLEARANCE LIGHT
for horizontal or vertical flush-mounting, clear lens with 2 red LEDs can be used as
taillight or clearance light, 8 –28 V
12 V / 0.5 W, current consumption = approx. 0.04 A
500 mm cable with caps
2XA 959 790-401*
5,000 mm cable with caps
2XA 959 790-411*
Type approval
7597 and
031721
LED CLEARANCE LIGHT
for horizontal or vertical surface-mounting, with reflector, 12 V,
2 holes for fastening screws B 4.2
12 V / 0.6 W, current consumption = approx. 0.05 A
500 mm cable
2TM 008 645-931
5,000 mm cable
2TM 008 645-921
For horizontal surface-mounting, the LED field must point to the outer vehicle edge.
For vertical surface-mounting, the LED field may point upwards or downwards.
(Clearance light can also be used as a taillight with reflector.)
Type approval
1395 and
1398
48 | 49
These LED products have the following characteristics
Additional features are shown separately ( )
LED AUXILIARY STOP LIGHT
for horizontal surface-mounting, with 12 red LEDs, in brilliant finish, with 3D effect
thanks to each LED being embedded in a separate reflector, with 200 mm cable
12 V / 1.8 W, current consumption = approx. 0.15 A
12 V, red lens
2DA 343 800-001*
12 V, red lens
2DA 343 800-007*
12 V, with rubber base
Type approval
2DA 343 800-057*
7715
LED AUXILIARY STOP LIGHT
for horizontal surface-mounting, 12 LEDs, 2,500 mm cable and open cable ends
12 V / 2 W, current consumption = approx. 0.16 A
12 V, red lens
2DA 959 071-537*
12 V, clear lens
2DA 959 071-037*
Type approval
7547
LED AUXILIARY STOP LIGHT
for horizontal or vertical surface-mounting, with 10 red LEDs, red lens,
with 3000 mm cable, design height 9.5 mm (when installed)
12 V / 0.7 W, current consumption = approx. 0.06 A
for screw attachment
2DA 343 106-007*
self-adhesive for smooth and clean surfaces
2DA 343 106-207*
Type approval
7696
LED AUXILIARY STOP LIGHT
for horizontal or vertical surface-mounting, with 10 red LEDs, with smoked glass lens,
3000 mm cable, design height 9.5 mm (when installed)
12 V / 0.7 W, current consumption = approx. 0.06 A
for screw attachment
2DA 343 106-021*
self-adhesive for smooth and clean surfaces
2DA 343 106-221*
Type approval
* Please see the note on pages 8 and 9 regarding LED indicators and the LED indicator failure check.
7696
REAR LIGHTING
AUXILIARY STOP LIGHT
for horizontal flush-mounting, red lens,
with pre-fitted 12 V bulbs, 2.3 W
with PE foam seal, coated on both sides with adhesive
2DA 008 136-027
Screw attachment from the front through the lens (screws
are not included)
2DA 008 136-017
Type approval
02799
AUXILIARY STOP LIGHT
for horizontal surface-mounting, with 12 V bulbs,
2.3 W, cable 146 751-00 included loose
2DA 008 136-031
Type approval
02799
Accessories (order separately):
Cable with grommet
8KA 146 751-007
Cable without grommet
8KA 144 707-007
Grommet only
9GT 146 757-007
REFLECTORS
self-adhesive, red
8RA 002 014-081
self-adhesive, amber
8RA 002 014-101
self-adhesive, white
8RA 002 014-091
Type approval
623555
REFLECTORS
for horizontal or vertical surface-mounting
self-adhesive, red
8RA 003 326-031
self-adhesive, amber
8RA 003 326-041
self-adhesive, white
8RA 003 326-051
Type approval
0292031
REFLECTORS
for horizontal or vertical surface-mounting, suitable for light series 9642
self-adhesive, red
8RA 343 160-007
self-adhesive, amber
8RA 343 160-027
self-adhesive, white
8RA 343 160-017
Type approval
3190
50 | 51
REFLECTORS
for horizontal or vertical surface-mounting
8RA 009 226-137
self-adhesive, red
REFLECTORS
for horizontal or vertical surface-mounting
self-adhesive, amber
8RA 009 226-127
REFLECTORS
for horizontal or vertical surface-mounting
self-adhesive, white
8RA 009 226-117
REFLECTORS
8RA 343 220-007
self-adhesive, red
with 2 holes for fastening screws, red
Type approval
8RA 343 220-017
023191
REFLECTORS
2 holes, Ø 6 mm, for fastening screws
8RA 002 020-001
red
Type approval
02346
REAR FOG LIGHT
with integrated reflector
2NE 344 610-007
12 V, inc. bulb
8RA 344 610-017
12 V, without bulb
Type approval
5857
REAR LIGHTING
These LED products have the following characteristics
Additional features are shown separately ( )
LED LICENSE PLATE LIGHT
for surface-mounting left and right next to the licence plate 520 x 120 mm,
with 2.5 m cable, bracket for mounting the light to the body, cover, fastening screws,
cover caps for screws as well as a spacer for different mounting situations, multivoltage 10-33 V; with 2 LEDs 0.5 W
12 V / 0.55 W, current consumption = approx. 0.04 A
2KA 959 640-607*
clear lens, black housing
Type approval
4068 and
031721
LED LICENSE PLATE LIGHT
12 V, for surface-mounting on the right or left next to the licence plate, with 4 LEDs,
clear lens, housing made of black plastic, with CE and ECE type approval, with flat plug
6.3 x 0.8
12 V/1 W, current consumption = approx. 0.08 A
for 520 x 120 mm licence plates, only 1 light
required for illumination
Type approval
2609
for 340 x 240 and 280 x 200 mm licence plates
Type approval
2KA 010 278-321*
2KA 010 278-421*
2911
LED LICENSE PLATE LIGHT
12 V, for flush-mounting above the licence plate, with frame, with
flat plug 6.3 x 0.8
for 340 x 240 and 280 x 200 mm licence plates,
only 1 light required for illumination
Type approval
2KA 010 278-411
2911
LED LICENSE PLATE LIGHT
for flush-mounting above the licence plate 520 x 120 mm, 2 lights required
for illumination, with black plastic frame, with flat plug 6.3 x 0.8
12 V/1 W, current consumption = approx. 0.08 A
Type approval
2609
2KA 010 278-311*
52 | 53
LICENSE PLATE LIGHT
for flush-mounting above or below licence plates 520 x 120 mm
(2 or 3 lights) and 340 x 240 mm (2 lights), 2 x M4 fastening screws, installation depth:
approx. 25 mm, clear lens
with chrome brilliant-finish edge
2KA 001 378-001
with silver-coloured edge,
without fastening screws
2KA 001 378-041
with black edge
and 12 V bulb
2KA 001 378-127
Type approval
12958
LICENSE PLATE LIGHT
for flush-mounting above or below (2 lights) the licence plate
520 x 120 mm, 2 holes for fastening screws, installation depth: approx. 20 mm,
Clear lens
2KA 004 331-061
with 12 V bulb
Type approval
22890
SIDE LIGHTING
Side marker lights
Page
55 – 56
Auxiliary indicators
Page
57
54 | 55
These LED products have the following characteristics
Additional features are shown separately ( )
LED SIDE MARKER LIGHT
for surface-mounting, modern night-time design and high level of safety thanks to
maximum illuminated area, 12 V, additional versions on request
6.3 mm contact pin, white frame
2PS 344 690-007*
6.3 mm contact pin, grey frame
2PS 344 690-027*
6.3 mm contact pin, black frame
2PS 344 690-067*
AMP Superseal, white frame
2PS 344 690-607
AMP Superseal, black frame
2PS 344 690-617
Type approval
5853
with 6.3 mm contact
LED SIDE MARKER LIGHT
for horizontal flush-mounting, with 2 LEDs, with reflector, with seal and two cables
500 mm long, with ECE and SAE type approval
12 V / 0.5 W, current consumption = approx. 0.04 A
with fastening screws
2PS 964 295-067*
self-adhesive, without seal,
with caps for the screw holes
2PS 964 295-081*
Type approval
0202
LED SIDE MARKER LIGHT
for horizontal surface-mounting, with 250 mm cable, self-adhesive
12 V, horizontal
2PS 009 226-021/7
12 V, vertical
2PS 009 226-077
for horizontal surface-mounting, with 6.3 mm contacts and counterplug grommet,
self-adhesive
2PS 009 226-067
12 V, horizontal
Type approval
* Please see the note on pages 8 and 9 regarding LED indicators and the LED indicator failure check.
10236
SIDE LIGHTING
This LED product has the following characteristics
LED SIDE MARKER LIGHT SET
for horizontal flush-mounting, for retrofitting to passenger cars <
6 m, 4 units each, with LED technology
12 V / 0.7 W, current consumption = approx. 0.06 A
ECE
SAE
(USA)
amber lenses,
Silver-grey finishers
2PS 008 138-801*
X
X
Grey lenses,
Black finishers
2PS 008 138-811
X
X
Grey lenses,
Silver-grey finishers
2PS 008 138-821
X
X
ECE
SAE
(USA)
Type approval
9110
SIDE MARKER LIGHT SET
for horizontal and vertical flush-mounting, 4 units each, with
amber 12 V / 5 W bulb
2PS 008 541-801*
in arrow design
Type approval
X
1223
SIDE MARKER LIGHT
for horizontal flush-mounting, with reflector, with seal, with 12 V bulb, with
ECE and SAE type approval
12 V/5 W, amber
2PS 964 295-001
Red SMLR in accordance with SAE
2XS 964 295-031/-037
Type approval SMLR
9807, UR
812
SIDE MARKER LIGHT
for horizontal or vertical flush-mounting, with reflector, with 12 V bulb,
with white base plate, with ECE and SAE type approval
12 V/3 W
2PS 962 964-037
Seal (order separately)
9GD 963 281-001
Grommet (order separately)
Type approval ECE
Info
For vehicles < 6 m in length and/or < 3.5 t, auxiliary indicators of category 5 are
prescribed, and for vehicles > 6 m in length and/or > 3.5 t, auxiliary indicators of
category 6 are prescribed.
10236
9GT 963 129-001
56 | 57
This LED product has the following characteristics
LED AUXILIARY INDICATOR
for horizontal flush-mounting, category 5,
simple gluing into prepared mirror,
can also be used as a universal auxiliary indicator
12 V / 0.7 W, current consumption = approx.
0.06 A
Type approval
2BM 008 771-007*
ECE
SAE
(USA)
X
X
011423
AUXILIARY INDICATOR
for surface-mounting on the side, category 6 for 24 V / 21 W, without bulb, extremely
flat design
2BM 008 355-001
Lens, amber
Type approval
1059
2BM 008 355-017
Clear lens
Type approval
1848
Accessories
Harness for non splashwater-proof area
8KA 157 425-007
AUXILIARY INDICATOR
for surface-mounting on the side, category 5 and 6 for 12 V and 24 V / 21 W, with bulb
Suitable for GGVS/ADR
2BM 006 692-017
Left
2BM 006 692-027
Right
Type approval
0152621
AUXILIARY INDICATOR
for flush-mounting on the side, category 5 for 12 V, with bulb
small, space-saving
Type approval
* Please see the note on pages 8 and 9 regarding LED indicators and the LED indicator failure check.
■ SAE type approval for vehicles < 2,032 mm wide
● SAE type approval for vehicles < 2,031 mm wide
42621
2BM 003 563-111
INTERIOR LIGHTING
Ceiling lights
Page
59 – 63
Orientation lights
Page
62 – 67
Reading lights
Page
68 – 69
Ambient lighting
Page
69
58 | 59
These LED products have the following characteristics
STANDARD LED SPOTLIGHTS, FIXED
STANDARD LED SPOTLIGHTS, ADJUSTABLE
Number of Power LEDs: 1 white
Illumination angle: 40° or 20°
Illuminance at 1 m: 156 lux (20°), 65 lux (40°)
IP protection class: 3 x
Power consumption: 2 W (0.16 A at 12 V)
Lens: glass-clear
Installation: choice between screw- or spring-assisted mounting
Spotlight current consumption at 12 V/2.5 W = approx. 0.20 A
Number of Power LEDs: 1 white
Illumination angle: 40° or 20°
Illuminance at 1 m: 156 lux (20°), 65 lux (40°)
IP protection class: 3 x
Power consumption: 2 W (0.16 A at 12 V)
Lens: glass-clear
Installation: choice between screw- or spring-assisted mounting
Spotlight current consumption at 12 V/2.5 W = approx. 0.20 A
Flush-mounting, fixed, wide illumination (40°)
Flush-mounting, adjustable, wide illumination (40°)
Finisher colour*:
Finisher colour*:
white
2JA 344 040-701
white
2JA 343 790-301
black
2JA 344 040-711
black
2JA 343 790-311
silver
2JA 344 040-721
silver
2JA 343 790-341
Flush-mounting, fixed, spot-type illumination (20°)
Flush-mounting, adjustable, spot-type illumination (20°)
Finisher colour*:
Finisher colour*:
white
2JA 344 040-741
white
2JA 343 790-401
black
2JA 344 040-751
black
2JA 343 790-411
silver
2JA 344 040-761
silver
2JA 343 790-441
additional with white, ambient Celis® light guide ring, current consumption of the
Celis® light guide ring at 12 V / 0.5 W = approx. 0.04 A
Accessories
Flush-mounting, adjustable, wide illumination (40°)
Round finisher with angled edges
black
9AB 344 057-001
white
9AB 344 057-011
silver
9AB 344 057-021
chrome
9AB 344 057-061
gold
9AB 344 057-071
Round finisher with rounded edges
Finisher colour*:
white
2JA 343 790-701
black
2JA 343 790-711
silver
2JA 343 790-741
Flush-mounting, adjustable, spot-type illumination (20°)
Finisher colour*:
white
2JA 343 790-601
black
2JA 343 790-611
silver
2JA 343 790-641
chrome
9AB 344 045-061
gold
9AB 344 045-071
Stainless metal frame, polished
9AB 959 505-501
Stainless metal frame, satined
9AB 959 505-561
* further finisher colours (e.g. real-wood look) or ambient CELIS® light guide ring
(e.g. blue, red) on request
black
9AB 344 058-001
Accessories
white
9AB 344 058-011
Finisher chrome
9AB 343 792-061
silver
9AB 344 058-021
Finisher gold
9AB 343 792-071
chrome
9AB 344 058-061
gold
9AB 344 058-071
Square finisher with angled edges
* further finisher colours (e.g. real-wood look) or ambient CELIS® light guide ring
(e.g. blue, red) on request
INTERIOR LIGHTING
These LED products have the following characteristics
*
*
LED SPOTLIGHTS ROUND, FLAT FLUSH-MOUNTING/SURFACE-MOUNTING
Illumination angle:
Illuminance at
1 m:
IP protection class:
Power consumption:
Dimensions:
Voltage:
35°
45 lux (Standard),
105 lux (high power)
20
Standard 1.5 W (0.12 A at 12 V)
High power 2.6 W (0.21 A at 12 V)
Flush-mounting variant only 14 mm
Surface-mounting variant only 22 mm
5 VDC (connection possible only with control unit)
Individual packaging
consisting of 1 spotlight LED, 1 colour light frame, 1 coloured installation frame,
1 seal ring for flush-mounting
Flush-mounting,
fixed
Finisher colour**
Standard LED spotlight
High-power LED spotlight
Standard LED
Spotlight, 1.5 W
High-Power LED spotlight
2.6 W (double light power
with cooling element)
white
2JA 344 199-001
2JA 344 599-001
black
2JA 344 199-011
2JA 344 599-011
silver
2JA 344 199-021
2JA 344 599-021
without Celis®
with Celis® warm-white ambient
white
2JA 344 199-101
2JA 344 599-101
black
2JA 344 199-111
2JA 344 599-111
silver
2JA 344 199-121
2JA 344 599-121
white
2JA 344 199-201
2JA 344 599-201
black
2JA 344 199-211
2JA 344 599-211
silver
2JA 344 199-221
2JA 344 599-221
white
2JA 344 199-301
2JA 344 599-301
black
2JA 344 199-311
2JA 344 599-311
silver
2JA 344 199-321
2JA 344 599-321
with Celis® blue ambient
with Celis® red ambient
with Celis® orange ambient
white
2JA 344 199-351
2JA 344 599-351
black
2JA 344 199-361
2JA 344 599-361
silver
2JA 344 199-371
2JA 344 599-371
Accessories
Installation frame, the overall height with frame is 22 mm
chrome
9AB 344 192-061
gold
9AB 344 192-071
A control unit is required for the use of more than one spotlight
Number of circuits:
IP protection class:
Power consumption:
Voltage:
max. 8 spotlight LEDs in 1 or 2 dimming circuits
30
1–16 W
Multi-voltage (9 – 32 VDC)
for 4 Standard or High-Power spotlights
please use ...
5XA 344 150-001
for 8 Standard or 5 high power spotlights
please use ...
5XA 344 150-011
* Connection possible only with control unit (5XA 344 150-001/011)
** Further finisher colours (e.g. real-wood look) available on request
60 | 61
These LED products have the following characteristics
Additional features are shown separately ( )
EUROLED
Number of LEDs
Connection
Lens
Power consumption
Installation
12 V / 4 W, current consumption =
approx. 0.33 A
1 white Power LED
electrical connection via a cable
2,500 mm long
white
White 4 W (0.33 A at 12 V)
Red <2.5 W (0.20 A at 12 V)
Surface-mounting, permanently bonded
with base plate
2JA 959 820-501
EUROLED TOUCH
Number of LEDs
Connection
Lens
Power consumption
Installation
Function
1 white and 8 red
electrical, using a 2,500 mm cable
white
White 4 W (0.33 A at 12 V)
Red <2.5 W (0.20 A at 12 V)
Surface-mounting, permanently bonded
with base plate
with sensitive switch, for ON/OFF and
dimming as well as switching between
red and white light
black finisher
2JA 959 950-031
white finisher
2JA 959 950-041
CARGOLED
Number of LEDs
Connection
Illumination angle
Illuminance at 1 m
Power consumption
Lens
Installation
Temperature range
4 white Power LEDs
electrical, using a 310 mm cable
44° (wide illumination at close range)
180 lux
6 W (0.5 A at 12 V)
glass-clear
Flush-mounting (aluminium installation
frame)
–40 °C to +60 °C
cold white
2JB 343 227-001
warm white
2JB 343 227-041
Accessories
Installation frame, grey
9XD 344 118-101
INTERIOR LIGHTING
These LED products have the following characteristics
Additional features are shown separately ( )
CARGOLED
Number of LEDs
Connection
36 white LEDs
electrical, using a 2,500 mm
cable
70°, wide horizontal and narrow vertical
illumination
720 lux
9 W (0.75 A at 12 V)
glass-clear
impact-resistant plastic,
UV-resistant
Surface-mounting, permanently bonded
with white base plate
Illumination angle
Illuminance
Power consumption
Lens
Material description
Installation
2JA 959 037-511
MINI OVALLED
Number of LEDs
4 white LEDs, 1 ambient LED
Illumination angle
50°
Illumination
side driver or instrument range
Illuminance at
1m
Standard 14.5 lux,
Power 54 lux
Function
ambient lighting can be switched on
IP protection class
6K9K (without frame/switch),
40 (with frame/switch)
Power consumption
Standard 1.7 W (0.14 A at 12 V)
Power 3.6 W (0.30 A at 12 V)
Lens
brilliant and clear
Installation
Flush-mounting
Voltage
12 V or 24 V
Current consumption
12 V/3.6 W, = approx. 0.30 A
Temperature range
–40 °C to +60 °C
without frame
and switch
with frame
and switch
4 white power LEDs,
red
2JA 343 570-011
2JA 343 570-051
4 white power LEDs,
blue
2JA 343 570-117
2JA 343 570-157
4 white standard LEDs, red
2JA 343 570-031
2JA 343 570-071
LED equipment
62 | 63
These LED products have the following characteristics
LED LIGHTS WITH SWITCH
Number of LEDs
Illuminance at 1 m
Length
Light colour
Material description
Installation
Nominal output
Current consumption
12 LEDs
approx. 100 lux
355 mm
4000 K (neutral white)
Lens and frame made of impactresistant material
Surface-mounting
3.5 W
approx. 0.30 A at 12 V,
approx. 0.15 A at 24 V
2JA 007 373-151
Number of LEDs
Illuminance at 1 m
Length
Light colour
Material description
Installation
Nominal output
Current consumption
24 LEDs
approx. 200 lux
355 mm
4000 K (neutral white)
Lens and frame made of impactresistant material
Surface-mounting
7W
approx. 0.58 A at 12 V,
approx. 0.29 A at 24 V
2JA 007 373-161
TRANSISTOR CEILING LIGHT
Lighting material
Feature
IP protection class
Lens
Installation
Voltage
Bulb
fully interference suppressed, compact
fluorescent light with switch
43
glass-clear
Surface-mounting
12 V
255 mm long, 7 W
2JA 007 373-001
285 mm long, 9 W
2JA 007 373-031
355 mm long, 11 W
2JA 007 373-061
440 mm long, 8 W
2JA 007 372-001
670 mm long, 13 W
2JA 007 372-041
Spare parts
Floor light,
7 W, white, 255 mm
8GS 861 955-001
Floor light,
9 W, white, 285 mm
8GS 861 955-011
Floor light,
11 W, white, 355 mm
8GS 861 955-021
Floor light,
8 W, warm white, 440 mm
8GS 002 296-101
Floor light,
8 W, white, 440 mm
8GS 002 296-111
Floor light,
13 W, white, 670 mm
8GS 861 953-011
INTERIOR LIGHTING
These LED products have the following characteristics
Additional features are shown separately ( )
FLAT LED SURFACE-MOUNTED LIGHT
Number of LEDs
Connection
10 white LEDs
electrical, using a 500 mm cable
Illumination angle
Illuminance at 1 m
Power consumption
Lens
Installation
Temperature range
38°
32 lux
1.8 W (0.15 A at 12 V)
Clear
Surface-mounting,
permanently bonded with base plate
– 40 °C to + 60 °C
12 V, white LEDs
2JA 343 606-001/-007
12 V, blue LEDs
2JA 343 606-201
LED STEP LIGHT
Number of LEDs
Connection
Feature
Colouring
Power consumption
Lens
Installation
2 white LEDs
electrical, via flat plug and grommet
with prism rod as a light aperture body
Grey housing
0.7 W (0.05 A at 12 V)
glass-clear
Surface-mounted (horizontally or
vertically)
2JA 008 078-031
LED STEP LIGHT
Number of LEDs
Connection
Illumination angle
Illuminance at 1 m
Feature
Power consumption
Lens
Scope of delivery
Installation
10 white LEDs
2,500 mm cable
24°
130 lux
cast in one piece
2 W (0.16 A at 12 V)
glass-clear
with screws, screw caps, seal, and cable
connector
Flush-mounting
2JA 959 073-001
64 | 65
These LED products have the following characteristics
Additional features are shown separately ( )
LED STEP LIGHT
Number of LEDs
Connection
Illumination
Illuminance at 1 m
Colouring
Power consumption
Lens
Scope of delivery
Installation
1 LED
electrical, using a 100 mm potted cable
wide in close range areas
< 10 lux
White cover cap
0.5 W (0.04 A at 12 V)
Clear
with seal
Flush-mounting, choice with 2 screws or
with snap-on fastening
White LED
2JA 998 560-017
LED STEP LIGHT
Number of LEDs
Connection
Illumination
Illuminance at 1 m
Colouring
Power consumption
Lens
Scope of delivery
Installation
1 LED
electrical, using a 100 mm potted cable
wide in close range areas
< 10 lux
White cover cap
0.5 W (0.04 A at 12 V)
Clear
with seal
Flush-mounting, choice with 2 screws or
with snap-on fastening
LED blue
2JA 998 560-057
ENTRY LIGHT AND AWNING LIGHT
Number of light sources
Illumination
Illuminance at 1 m
Colouring
Installation
Voltage
3 tubular bulbs at 5 W
optimal in and in front of the step area
23 lux
Housing painted in silver
Surface-mounting
12 V
12 V
2XT 008 929-001
Spare parts
12 V bulb C5W
8GM 002 092-121
INTERIOR LIGHTING
These LED products have the following characteristics
Additional features are shown separately ( )
LED ENTRY LIGHT AND AWNING LIGHT
Number of LEDs
Illuminance at 1 m
Energy consumption
Colouring
Power consumption
Light colour
Light intensity
Lens
Installation
3 high-power LEDs
107 lux
4.5 W at 12 V
Housing painted in silver
4.5 W (0.37 A at 12 V)
4000 K (neutral white)
4x compared to the bulb version
glass-clear
Surface-mounting
2XT 008 929-011
LED STEP LIGHT
Number of LEDs
Connection
2 LEDs
electrical, using a 120 mm cable
Illumination angle
Illuminance at 1 m
Feature
Power consumption
Lens
Scope of delivery
Installation
30°
15 lux
with reverse polarity protection
0.5 W (0.04 A at 12 V)
glass-clear
Seal, attachment screws, and screw caps
Flush-mounting
White LEDs
2XT 959 510-427
LED STEP LIGHT
Number of LEDs
Connection
2 LEDs
electrical, using a 120 mm cable
Illumination angle
Illuminance at 1 m
Feature
Power consumption
Lens
Scope of delivery
Installation
30°
15 lux
with reverse polarity protection
0.5 W (0.04 A at 12 V)
glass-clear
Seal, attachment screws, and screw caps
Flush-mounting
Blue LEDs
2XT 959 510-657
66 | 67
These LED products have the following characteristics
Additional features are shown separately ( )
MINI THINLED
Number of LEDs
Connection
Temperature range
5 white or 3 blue LEDs
electrical, using a cable 170 mm
long
34° (wide at close range)
7.2 lux
6K9K
2.8 W (0.23 A at 12 V)
Clear
Surface-mounting, permanently bonded
with base plate
Temperature rang –40 °C to +60 °C
5 white LEDs
2JA 343 660-101/-107
3 blue LEDs
2JA 343 660-021
Illumination angle
Illuminance at 1 m
IP protection class
Power consumption
Lens
Installation
LED STEP LIGHT
Number of LEDs
Feature
Installation
1 LED
with polished steel frame
Flush-mounting
1 blue LED
2XT 959 680-612
1 white LED
2XT 959 680-812
LED STEP LIGHT
Number of LEDs
Feature
Power consumption
Lens
Installation
4 white LEDs
with square white frame
0.5 W (0.04 A at 12 V)
white
Flush-mounting
12 V
2XT 980 580-052
12 V, High-Power
2XT 980 596-002
INTERIOR LIGHTING
This LED product has the following characteristics
LED READING LIGHT, FLEXIBLY ADJUSTABLE ARM
Number of LEDs
Connection
Illumination
Illumination angle
Illuminance at 0.7 m
IP protection class
Power consumption
Lens
Installation
1 white Power LED
electrical, using a cable 150 mm
long
optimal for map-reading
38°
110 lux
53
2.5 W (0.20 A at 12 V)
patterned
Surface-mounting
150 mm
2JA 343 720-011
400 mm
2JA 343 720-111
Finisher colour black*
150 mm
2JA 343 720-021
400 mm
2JA 343 720-121
Finisher colour silver*
150 mm
2JA 343 720-291
400 mm
2JA 343 720-191
with plug for cigarette lighter (150 mm)
Finisher colour white
2JA 343 720-071*
Finisher colour black
2JA 343 720-081
Finisher colour silver
2JA 343 720-091
* further finisher colours on request
SPOTLIGHT READING LIGHT
Number of light sources
Feature
Light source
Power consumption
Lens
Scope of delivery
Installation
Voltage
1 Xenon bulb 12 V/6 W
with flexible metal arm
strong and glare-free
6 W (0.50 A at 12 V)
glass-clear
with bracket for permanent surfacemounting
Surface-mounting
12 V
a) for fixed installation
a)
500 mm
2AB 004 532-001
195 mm
2AB 004 532-011
b) with plug for cigarette lighter
160 mm
2AB 004 532-021
Accessories
Red lens
9EL 128 922-011
b)
Spare parts
Xenon bulb, 12 V
8GP 007 676-121
Bracket
9XB 136 202-005
68 | 69
This LED product has the following characteristics
LED READING LIGHT
Number of LEDs
Illuminance at 1 m
IP protection class
Power consumption
Lens
Scope of delivery
Installation
1 LED
5 lux
20
0.3 W (0.02 A at 12 V)
clear
3 frames (white, grey and black)
Surface-mounting via attachment
element
LED red
2JA 344 170-001
LED blue
2JA 344 170-011
LED white
2JA 344 170-021
LED, amber
2JA 344 170-031
Variant
White LED with silver instead of
grey frame
2JA 344 170-201
READING LIGHT
Number of light sources
Connection
Feature
Housing
Power consumption
Lens
Installation
Voltage
1 halogen bulb
250 mm long cable
integrated ON/OFF switch in light head,
can be turned (340°), can be pivoted
(330°)
black
5 W (0.42 A at 12 V)
red or white replaceable
Surface-mounting
12 V
2AB 004 532-102
ACCESSORIES
Intelligent Battery Sensor
Page
71 – 72
Switches, plugs, sockets
Page
73 – 74
Battery chargers
Page
75
Hazard warning lights
Page
75
Hand lamps
Page
75
Boxes of spare bulbs
Page
75
70 | 71
IBScontrol:
Intelligent battery sensor with colour display
Which motorhome and caravan enthusiast has not had this
experience? Shortly before the start of the holiday, the motorhome
or caravan battery is fully charged and ready to go. The first days
of the holiday go just fine, but then the battery dies completely.
Nothing works! The reasons are varied. On the one hand, there
are more and more consumers in the vehicle. Also, as the battery
ages, it loses the ability to recharge at 100% of its nominal
capacity. The IBScontrol from HELLA measures the battery
capacity that is actually available and displays it clearly on a colour
display.
IBScontrol reduces battery risk to a minimum:
• Continuous battery monitoring
• The key information at a glance
• Precision through battery-specific adjustment
• Energy management of consumers
• Intuitive operation
• Very easy installation thanks to plug & play
IBScontrol: The details
• Intelligent battery sensor with colour display for
12 V vehicle electric systems
• Connection of one or two batteries possible
• Precise determination and representation of battery capacity,
aging and remaining running time
• Comfortable energy management for upgrading
• Very low current consumption thanks to automatic switch-off
• Four switch outputs and buzzers individually programmable,
including hysteresis
• Battery-specific adaptation of the system by
selecting the applicable battery characteristics (standard
starter, Gel and AGM)
• Data logging on SD card with simple analysis option
• Surface-mounted or flush-mounted version
1. Remaining progress display
Shows the remaining running time at
current consumption
2. Current display
Red = discharging
Green = charging
3. Current as numerical value
Example: Current drain 0.1 A
4. Battery aging
(SOH = State of health)
Example: The original battery capacity
is already reduced by 2 %
5. State of charge
(SOC = State of charge)
Current state of charge of the battery
Example: State of charge 88 %
Made in Germany
IBScontrol: The variants
IBScontrol SET
WITH DISPLAY FOR SURFACE-MOUNTED VARIANT
•
•
•
•
•
•
IBScontrol display (brilliant, black)
IBS battery sensor
Battery pole adapter
Completely pre-assembled harness
Operating/mounting instructions (CD ROM)
Assembly group (screw, cable tie, retaining plates as per variant)
Surface-mounted variant
6PY 178 103-811
IBScontrol SET
WITH DISPLAY FOR FLUSH-MOUNTED VARIANT
•
•
•
•
•
•
IBScontrol display (brilliant, black)
IBS battery sensor
Battery pole adapter
Completely pre-assembled harness
Operating/mounting instructions (CD ROM)
Assembly group (screw, cable tie, retaining plates as per variant)
Installation variant
6PY 178 103-831
IBScontrol
EXPANSION KIT
Expansion kit for monitoring a second battery, battery sensor
IBS, battery pole adapter, completely pre-assembled harness
Set
6PY 178 103-841
IBScontrol
AS SINGLE COMPONENT
Sensor 1
6PK 010 842-001
Sensor 2
6PK 010 842-011
72 | 73
Accessories
MODULE SWITCH
• self-cleaning contact system - erosion and contamination are minimised
• reliable switching even at low control currents
• minimal contact resistance for the lowest voltage losses
• long service life of up to 450,000 switching cycles
• tension spring with even contact force for reliable switching function
• standardised, high-quality AgNi 2.8 mm blade terminals
• flexible and individual laser-engraved symbols
• implementation according to customer requirements
• rapid product availability – even for small batch sizes
• reliable interpretation of signals for each switch position through the use of up to 4 LED light sources.
Night-time lighting in green, red function monitor
• Haptic design of the rocker for orientation on the rocker surface
Realisation of a very wide variety of 12 V and 24 V switching functions:
• Contact/changeover contact
• Momentary-contact switch / maintained-contact switch
• Locking function
• Hazard light switch
Switch with symbol for “step”
6FH 354 100-682
Switch with symbol for “heatable external mirror”
6FH 354 103-922
Switch without symbol
6FH 354 104-681
Switch with symbol 1 “AC” and symbol 2 “battery”
6FH 354 104-831
Switch with symbol 1 “blind down” and symbol 2 “blind up”
6FH 354 105-762
CONNECTOR
7-pin in accordance with ISO 1724, plastic version, screw connections
12 V
8JA 001 930-003
CONNECTOR SOCKET
7-pin in accordance with ISO 1724, plastic version, screw connections, 12 V
12 V
8JB 001 943-003
CONNECTOR SOCKET
13-pin in accordance with ISO 11 446, plastic version, screw connections, 12 V
with rubber grommet and rubber seal in hinged cover
8JB 005 949-001
with rear fog light switch-off
8JB 005 949-011
CONNECTOR
13-pin in accordance with ISO 11 446, plastic version, screw connections, with rubber grommet
12 V
8JA 005 951-001
SUPER-SHORT ADAPTER
from 13-pin socket (ISO 11 446) on the traction vehicle to 7-pin connector (ISO 11 446) on the trailer
12 V
8JA 008 969-001
ACCESSORIES
Accessories
CABLE ADAPTER
from 13-pin socket (ISO 11 446) on the traction vehicle
to 7-pin connector (ISO 11 446) on the trailer, with 250 mm cable
12 V
8JA 005 952-001
MINI-SHORT ADAPTER
from 7-pin socket (ISO 1724) on the traction vehicle
to 13-pin connector (ISO 11 446) on the trailer
12 V
8JA 008 981-001
SOCKET
2-pin in accordance with ISO 4165, without cover, 6.3 mm blade-terminals,
Load capacity: max. 16 A
6 –24 V
8JB 001 946-072
SOCKET
2-pin in accordance with ISO 4165, 6.3 mm blade terminals
Load capacity: max. 16 A, 6 –24 V
with spring-loaded cover
8JB 001 946-082
SOCKET
2-pin in accordance with ISO 4165, 6.3 mm blade terminals
Load capacity: max. 16 A, 6 –24 V
with snap-on cover
8JB 001 946-092
SURFACE-MOUNTED SOCKET
2-pin according to ISO 4165, screw connections
Load capacity: max. 16 A
6 –24 V
8JB 004 123-001
POWER SOCKET
2-pin with cover and clamping sleeve, suitable for cigarette lighter socket, 6.3 mm blade terminals
Load capacity: max. 16 A
6 –24 V
8JB 008 023-001
UNIVERSAL CONNECTOR
2-pin with screwed tension relief and 8 A fuse,
suitable for cigarette lighters and standard sockets (ISO 4165)
screw connection up to 2.5 mm
6 –24 V
8JA 007 589-001
CONNECTOR
2-pin in accordance with ISO 4165
6 –24 V
8JA 002 262-001
74 | 75
Accessories
MINI-CHARGER BATTERY CHARGER
AUTOMATIC 6 /12 V
CE-certified, 230 V/50 Hz/10 W,
Charging current at 6 V = 0.8 A or at 12 V = 0.6 A, automatic switch-off,
suitable for gel batteries, with reverse polarity protection
8ES 006 266-011
POWER CHARGER BATTERY CHARGER
10 AUTOMATIC
CE-certified, 230 V/50 Hz/130 W,
Normal charge 7 A, fast charge 10 A,
Automatic switch-off operationally safe due to overload protection
8ES 004 417-051
TURBO-CHARGER BATTERY CHARGER
CE-certified, 230 V/50 Hz/350 W,
Normal charge 9 A, fast charge 17 A,
operationally safe due to overload protection
8ES 004 417-061
HAZARD WARNING LIGHT
MODEL 3003 ACCU
when the engine is running, the rechargeable battery is charged through contacts in the charging bracket.
Automatic voltage switchover to match the vehicle´s electrical system 12/24 V, operating time in flashing
mode: 40 hours or 7 hours as work light, charging bracket and lead-gel rechargeable battery included
type-tested
2XW 007 146-011
HAZARD WARNING LIGHT
MODEL 3003
with fastening bracket (for battery operation via 5 mono cells, not included)
type-tested
2XW 007 146-001
BOXES OF SPARE BULBS
A must for every responsible camper. The assortment contains one bulb each for the most common lighting functions as well as
various spare fuses.
H4, 12 V
8GJ 002 525-913
H9, 12 V (not shown)
8GH 007 157-901
HAND LAMP
with 11 Watt PL tubes, impact-proof protective tube,
handle and cap made of oil- and petrol-resistant rubber,
length 44 cm, protective rating IP 64
Protection class II
2XM 001 974-051
LED HAND LAMP
30 LEDs, 12 V
2XM 001 974-211
60 LEDs, 12 V
2XM 001 974-221
Overview and description of icons
FEATURES
DESCRIPTION
COMMENTS
Overvoltage protection
Supplement to the electronics for protecting the LED
against high voltages/currents in the on-board network
according to ISO 7637-2.
Overloading of the LEDs can be caused by voltage spikes
in the vehicle because of:
Jump-starting
Defective control units
Load dump pulse
(faulty battery contact)
These can stress or damage the LED, which can lead to a
failure or a reduction in the service life. By supplementing
the circuit with appropriate components, it can be
protected, so that the service life is extended and failure
is prevented.
Bi-polarity of the light
Even when the connecting cable is attached with reverse
polarity, the LED functions fully.
The semiconductor in an LED must always be operated
with the correct polarity. The wrong polarity damages the
LED, so that LED lights are always equipped with reverse
polarity protection (diode). However, this function only
works when "+" and "-" are correctly connected. If a light
has a bi-polar circuit, function is independent of the
contact connections. This ensures Poka-yoke (avoiding
faulty installations) in conjunction with insulation
displacement technology, for instance. However, the
additional components on the PCB also increase the
costs.
Lamp approved for transport of dangerous goods
according to the European Agreement Concerning the
International Carriage of Dangerous Goods by Road (ADR;
in German, GGVS).
Generally required for truck and trailer lighting.
Precondition for approval: damage of the light source
must not cause explosive media to ignite.
Electromagnetic compatibility (EMC) tested
and EC type approval obtained.
If the light is not constructed according to EMC
specifications, and thus is not certified, interaction
between it and other safety-relevant electronic systems
may occur.
Approval for transport of dangerous goods
Electromagnetic compatibility
Examples:
Crackling sounds in radio, loudspeakers, disruption of
ABS electronics or failure of the light due to susceptibility
to interference.
Automotive Electronic Council
Components qualified according to automotive standard.
Electronic components (LEDs, diodes, …) are more robust
and safer than electronic components for industry thanks
to automotive specifications.
By using certified suppliers, a more robust design of the
circuit is possible even for longer periods, at a constant
quality. Thus slight additional costs for the components
improve the service life of LED lighting functions.
Overview and description of icons
FEATURES
DESCRIPTION
Power consumption of
LED lights
COMMENTS
Advantages of the LED:
Generally, LED lights need less power than bulb lighting.
Savings of up to 90 % are possible, also contributing to CO2 reductions.
On-board voltage
Defines the voltage supply of the light.
Whether 12 V, 24 V or for a multi-voltage range (8 – 33 V).
Multi-voltage is most flexible:
Requires fewer versions, but has more electronic circuit
components and thus a higher price.
International Protection (IP) according to DIN 40050 Part
9.
Specific definition for road vehicles.
5K = Dust protected
6K = Dust protection
9K = Water resistance during high-pressure/
steam cleaning.
The higher the protection class, the better the protection
against penetrating media. IP 6K9K maximum value
Completely sealed against dust and water.
Regulation according to ECE R 48:
The driver must be informed of a failure of the indicator
function. To remain legally compliant, this requirement
must also be fulfilled for LED lights. This requirement is
fulfilled by means of an integrated self-diagnostic unit on
the PCB of the LED and an electrical pulse. Since the end
of 2011, this failure check with pulse by HELLA has been
ISO standard: ISO 13207.
If the indicator failure check is not ensured, the general
vehicle certification becomes void. It is therefore not legal
to operate vehicles without indicator failure check in
countries subject to ECE R 48.
Basically, two different circuits are possible for LED lights:
Active:
Higher expenditure during development because of
complex circuit and necessary EMC approval. Higher
price because of electronic components, but electronic
current regulation allows for maximum LED service life.
IP protection class
Indicator failure check
according to ECE R 48
In combination with ballasts HELLA part No.
5DS 009 552-… the indicator failure check is ensured.
Electronic circuit
Active
Active:
LED current regulation by means of active electronics
Passive:
A specific voltage range is preset
for the LED by a dropping resistor.
Passive:
Cost-effective solution without complex protective
measures. Reduced LED service life in case of failure.
EMC approval not required.
Passive
Thermal Management
Active
Passive
Active:
Electronic power control of the LED in case of
impermissible high ambient temperatures. This ensures
the LED is protected against destruction by overheating.
Active:
Higher expenditure for active thermal management
development and higher parts prices ensure optimum
conditions for maximum service life.
Passive:
Optimum layout of the components for even temperature
distribution and temperature spreading.
Passive:
The warmer the LED gets through exterior factors or
heat generated by its own operation, the shorter the
service life.
HELLA KGaA Hueck & Co.
Rixbecker Straße 75
59552 Lippstadt, Germany
Tel.: +49 2941 38-0
Fax: +49 2941 38-7133
Internet: www.hella.com
HELLA Limited
Wildmere Industrial Estate
Banbury, Oxon OX16 3JU
Tel.: (01295) 225600
Fax: 0800 7832571
E-mail: hella.sales@hella.com
Website: www.hella.co.uk
HELLA Asia Singapore Pte Ltd
Regional Headquarters Asia Pacific
Independent Aermarket
2 International Business Park
#02-12 The Strategy
Singapore 609930
Tel: +65 6854 7300
Fax: +65 6854 7302
E-mail: singapore@hella.com
Internet: www.hellaasia.com
© HELLA KGaA Hueck & Co., Lippstadt
9Z2 999 134-391 J00516/G+R/07.13/1.9
Subject to technical and price modifications
Printed in Germany

Similar documents

Fog lights Spotlights

Fog lights Spotlights But which is the right auxiliary light for your requirements? Find the answer here, in our clearly structured and detailed summary of the respective light distributions projected by Hella auxiliary...

More information

Caravans and Motorhomes 2008

Caravans and Motorhomes 2008 Thanks to the use of LEDs, design engineers have a great deal more design freedom. Ergonomic aspects can also be implemented easily and effectively.

More information

24V-Trailers

24V-Trailers commercial vehicles which are in use day and night. The new Hella lights using LED technology pick up where other lighting concepts reach the limits of their possibilities. In the LED stoplight sec...

More information

90 mm modules general overview

90 mm modules general overview 83 mm LED 3-function light (indicator, position and daytime running light)

More information