premium catalogue

Bold, Tough & Rare
Toughen
up
your
Truck
WHY
SILVERBACK?
Because it’s
BOLD TOUGH
& RARE
BIRTH of SILVERBACK
It’s APPEAL
The parent company CSC Exhaust Parts
searched the world for the solution to the
growing demand for CHROME EXHAUST
COMPONENTS, which not only offered the
range and the quality, but could withstand
the new high temperatures that the
EURO EMISSION STANDARDS imposed
on new trucks.
IGNITE what’s BOLD in your Beast... Its DEADLY appearance!
It’s in the HEART of AMERICA they found
the SOLUTION and it was then SILVERBACK
CHROME was BORN.
Silverback chrome is not just Standard chrome, as the closer
you look you’ll find it becomes MORE APPEALING.
Its starts by using FLAWLESS MATERIAL held to a standard
TWICE that of ASTM SPECIFICATIONS, next being VERTICALLY
POLISHED to eliminate ring polish marks, then being TRIPLE
NICKEL COATED for improved chrome adhesion and Lastly
being chromed, with a CONTROLLED layer which is applied
with expertise and experience.
Outlet
vertical height
Choosing
Your Silverback
JUST FOLLOW THESE 5 SIMPLE STEPS TO SELECT
WHAT IS BEST FOR YOU & YOUR BEAST!
CHOOSE SERIES
CHOOSE TYPE
YOUR STACK WILL EITHER BE REDUCED OR NON REDUCED
CHOOSE STYLE
Stack height measurement
MAKE A DECISION THAT IS BACKED BY GUARANTEE
DEFINE THE CHARACTER OF YOUR BEAST
FROM 5 DIFFERENT STYLES
CHOOSE DIAMETER
CHOOSE LENGTH
Reduced
End Length
TOUGH COMES IN 3 SIZES... 6”, 7” & 8”
MAKE YOUR STACKS STAND OUT.
5” OD reduction
Diameter
Choose
Your Series
ENDURANCE
INCREASE what’s TOUGH about your Beast...
Its ability to SURVIVE!
BOLD
TOUGH
RARE
What you can avoid by making the right decision...
CORROSION & RUSTING
Corrosion and rusting generally occurs when poor
quality stacks are used which cannot endure the
harshness of the Australian elements. Also internal
rusting commonly occurs on late model trucks that
have euro emission control such as a DPF unit or
Ad-blue, this can dribble down the outside of the
chrome stack making it very difficult to clean.
SILVERBACK ADBLUE upgrade, 650C Series &
AIR-COOLED upgrade are all options that can assist
in reducing or removing the corrosion and rusting.
DISCOLOURED STACKS
Using stacks with incorrect temperature ratings will
result in irreversible and permanent discolouration.
This can appear as blue, gold or purple coloured
‘flame’ marks. The SILVERBACK 650C Series and the
AIR-COOLED upgrade are options that can guarantee
no stack discoloration.
Corrosion & Rusting
Discoloured
SO MAKE A DECISION THAT IS BACKED BY A GUARANTEE
Comes in 2 main Series; 350C Series & 650C Series
> S
ilverback 350C Series - For the Older Classic Truck
or any Truck built prior to EURO V (ADR80/03),
basically 2009 or earlier. As Traditional chrome
discolours at 315ºC - 370ºC this series will not
withstand the temperature that the new EURO-V
standard imposes.
> S
ilverback 650C Series - components are tested
to withstand temperatures of up to 650ºC.
This series utilizes a multiphase proprietary
system that prevents the chrome discolouring
at high temperatures, resists the corrosive
effects of Urea Re-Agents and under normal
use will not corrode internally.
And 2 optional upgrades; ADBLUE Upgrade &
AIR-COOLED Upgrade
> AD-BLUE Upgrade - This is a carefully applied
coating that has been formulated to endure the
acidic conditions the ad-blue creates. Generally
applied to 350C Series when heat from the DPF is
not an issue.
> AIR-COOLED Upgrade - This is when a stainless
insert sleeve is put into each stack to create an
Air-cooled chamber around the exhaust gas.
This is a recommended upgrade for CAB OVER
trucks such as the Kenworth K200 & Freightliner
Argosy. This is used in applications when
temperatures exceed 650°C.
Choose Type
YOUR STACK WILL EITHER BE
REDUCED OR NON-REDUCED
If you have a TRADITIONAL GUARD SETUP with standard 5” OUT MUFFLERS
you will need the REDUCED TYPE.
If you have SPORTS MUFFLERS with an OUTLET LARGER THAN 5” or you are running
a MONSTER SETUP you will need the NON-REDUCED stacks that are appropriate.
MONSTER
THE NEW SEAMLESS INTERLOCKING CHROME
EXHAUST in 6", 7" and 8"
The Key to the MONSTER Setup is the
SEAMLESS INTERLOCKING which is
achieved through a special reduced end
called a TAPERLOC. The TAPERLOC end
is on both the CENTRE SPOOL and the
ELBOW. This enables ANY TOP STACK to
slip onto the SPOOL and thus the SPOOL
to slip onto the ELBOW. These two joints
are then hidden with a WIDE CLAMP to
give the overall AWESOME appearance
of ONE CONTINUOUS exhaust stack.
A 350C Series 8inch
BULL HORN CURVE
MONSTER Pipe
FLOWTECH SPORTS MUFFLERS
IF YOUR NOT READY FOR A SILVERBACK MONSTER SETUP...
The FLOWTECH Sports Muffler
combined with SILVERBACK Stacks
gives you the traditional option to
give your BEAST the BOLD, TOUGH
& RARE it deserves!
The FLOWTECH Sports Mufflers are
designed to replace any CENTRECENTRE Vertical muffler that has a
44” long barrel.
FLOWTECH sports mufflers focus on
> SOUND
> PERFORMANCE
> FUEL ECONOMY
The ADVANTAGE is that this is achieved
without losing the ability to customise...
or compromising any element of
QUALITY in manufacturing.
TRADITIONAL
THE STANDARD GUARD
EXHAUST SETUP
If Your truck runs a TRADITIONAL
setup and you’re not yet ready to
change to a MONSTER Setup...
A pair of Silverback Chrome Top
Stacks are exactly what you require.
This will boost the APPEARANCE and
REPUTATION of your BEAST without
the need to change your setup.
A pair of 350C Series
8inch reduced to 5
inch MITRE CUT Stacks
fitted in a Traditional
Muffler set up
Choose Style
BRING out what’s RARE in your Beast...
Its UNIQUE Character!
With OVER 400 Different VARIATIONS of TOPS STACKS Offered!
THERE’s ABSOLUTELY NO REASON YOU CAN’T MAKE YOUR TRUCK UNIQUE...
So BRING out what’s RARE in your BEAST!
AUSSIE CURVE
THE TRADITIONAL SHAPE
WEST COAST CURVE
MUSCULAR NEW STYLE
BULL HORN
WILD LOOK – STANDS OUT
MITRE CUT
SHARP LOOKS
STRAIGHT CUT
AGGRESSIVE, IN-YOUR-FACE LOOKS
Choose Diameter
DIAMETER VARIATIONS
6” - EASY UPGRADE
7” - POPULAR UPGRADE
8” - PREMIUM UPGRADE
Choose Length
LENGTH VARIATIONS
SHORT (30”, 36” & 44”)
Day Cab – Low Clearance Work
MEDIUM (48” & 54”)
Sleeper Cab - Highway Runs
HIGH (60”, 64” & 72”)
High Sleeper – Tall Payloads
Air Intake Pipes
Combine a Silverback Air Intake Pipe with a Mako-Airforce Air Ram, which are
both Chrome Plated Stainless, and you have the peak of Awesomeness.
Not only that though... it will have a consistent shine that is far more enduring
than the surface of just stainless. And it will not Dull or get SURFACE RUST
spots or go YELLOW as exposed STAINLESS tends to do in the Tough conditions
your BEAST will live through!
Bold, Tough & Rare
1300 885 089
silverbackchrome.com.au