Training and Assessment Prospectus 2016

Transcription

Training and Assessment
Prospectus 2016
1
1 Owen Sivell Close, Liskeard Business Park, Liskeard, Cornwall, PL14 3US. Tel: 01579
348544. www.swaat.co.uk. info@swaat.co.uk
Contents
About South West Assessment and Training ......................................................................................... 5
Training Facilities .................................................................................................................................... 5
Meet The Team! ...................................................................................................................................... 6
Case Studies ........................................................................................................................................... 7
Anna Gubbins ...................................................................................................................................... 7
M.K. Pipework ..................................................................................................................................... 7
How to book a course ............................................................................................................................. 8
Online Resources .................................................................................................................................... 8
Onsite Training ........................................................................................................................................ 8
How to find us ......................................................................................................................................... 9
LOGIC Water Regulations ................................................................................................................. 10
LOGIC Unvented Domestic Hot Water for New Entrants .................................................................. 11
LOGIC Unvented Domestic Hot Water Reassessment ..................................................................... 11
LOGIC Certification Disinfection and Risk Assessment of Water Systems for Legionella................ 12
BPEC Installation of Above Ground Sanitary Pipework and Rainwater Systems in Domestic
Properties .......................................................................................................................................... 12
BPEC Rainwater/Greywater Harvesting ............................................................................................ 13
Logic Certification Foundation Certificate in Basic Heating and Hot Water System Design and
Specification ...................................................................................................................................... 13
Gas Section ........................................................................................................................................... 14
Domestic BPEC Foundation Level Gas Course ................................................................................ 15
BPEC Fast Track Gas Course........................................................................................................... 15
Natural Gas Initial Assessment for New Entrants (CCN1) ................................................................ 16
Domestic Natural Gas Individual Appliance Assessments (add-ons) ............................................... 16
Domestic Natural Gas Re-assessment Training ............................................................................... 17
Domestic Natural Gas Re-assessment ............................................................................................. 17
ACOPs Gas Course (for domestic, commercial or liquid petroleum gases) ..................................... 18
Medium Pressure Gas Meters (REGT1) Training and Assessment ................................................. 19
CMDDA1 Training and Assessment (Carbon Monoxide Investigation) ............................................ 19
Entry requirements/pre-requisites .................................................................................................. 19
Domestic LPG Initial Assessment for New Entrants (CCLP1) .......................................................... 20
LPG Assessment (Conversion from Natural Gas to LPG - CONGLP1) ............................................ 20
LPG 'Add-on' Assessments ............................................................................................................... 21
Installation and Commissioning of LPG Gas Storage Vessels and Controls (VESLP1) ................... 22
Installation and Commissioning of LPG Gas Storage Vessels and Controls (VESLP2) ................... 22
Electro-fusion Welding....................................................................................................................... 23
Commercial/Industrial Pipework ........................................................................................................ 23
Commercial/Industrial Heating .......................................................................................................... 24
Commercial/Industrial Catering ......................................................................................................... 25
Electrical Section ................................................................................................................................... 26
2
Basic Electrics ................................................................................................................................... 26
City and Guilds 2382-12: 17th Edition Wiring Regulations ............................................................... 26
City and Guilds 2382 17th Edition Wiring Regulations Amendment No. 1 - One Day Update ......... 27
EAL 7695 Electrical Qualified Supervisor Course ............................................................................. 27
........................................................................................................................................................... 27
EAL NVQ2/3 Electrical Installations - Part Time ............................................................................... 28
BPEC Part P course .......................................................................................................................... 28
Domestic Periodic Inspection and Testing of Electrical Installations ................................................ 28
EAL Level 3 Award in the Initial Verification and Certification of Electrical Installations ................... 29
EAL Level 3 Award in the Periodic Inspection, Testing and Certification of Electrical Installations .. 29
City and Guilds 2393 - Certificate in the Building Regulations for Electrical Installations in Dwellings
........................................................................................................................................................... 30
City and Guilds 2377-22 Portable Appliance Testing (PAT testing) ................................................. 30
BS7909: Temporary Electrical Supplies ............................................................................................ 30
BPEC Electricity for Plumbers ........................................................................................................... 31
Oil Section ............................................................................................................................................. 31
OFTEC Oil 50 - Introduction to Domestic Oil Fired Appliances ........................................................ 31
OFTEC 105e - Installation of Domestic Pressure Jet Oil-fired Appliances ....................................... 31
OFTEC 101 - Commissioning and Servicing of Pressure Jet Oil Heating Appliances ..................... 32
OFTEC 102 - Commissioning and Servicing of Vaporising Oil-Fired Appliances ............................. 32
OFTEC 600A - Oil Tank Installations ................................................................................................ 33
OFTEC 201 - Commissioning and Servicing of Pressure Jet Oil Heating Appliances ..................... 33
Renewables Section ............................................................................................................................. 34
BPEC Renewable Energy Awareness .............................................................................................. 34
City and Guilds 6361-01 - Level 3 Diploma for Domestic Energy Assessors ................................... 34
City and Guilds 6361-04 - Level 4 Diploma for Non-domestic Energy Assessors (Domestic Energy
Assessor Qualified) ........................................................................................................................... 35
Microgeneration Certification Scheme (MCS) Accreditation Advisory Course ................................. 35
City and Guilds 6066 – Domestic and Commercial Green Deal Assessor courses .......................... 36
Green Deal Installer Training (PAS 2030) ......................................................................................... 36
LOGIC Solar Domestic Hot Water course (for installers) .................................................................. 37
LOGIC Groundsource/Airsource Heat pumps ................................................................................... 37
BPEC Groundsource/Airsource Heat pumps - for non-installers ...................................................... 38
BPEC Photo-voltaic Solar (PV) ......................................................................................................... 38
City and Guilds 2399 - Installation and Testing of Domestic Solar Photovoltaic Systems ............... 39
BPEC G59 - Installation of Photovoltaic Systems up to 100kWp...................................................... 39
APHC Installation of Solid Fuel Appliances and Heating Systems Fed By Solid Fuel in Domestic
Properties .......................................................................................................................................... 40
LOGIC Biomass course ..................................................................................................................... 40
3
BPEC Rainwater/Greywater Harvesting ............................................................................................ 40
LOGIC Energy Efficiency................................................................................................................... 41
City and Guilds 6361-01 - Level 3 Diploma for Domestic Energy Assessors ................................... 41
City and Guilds 6361-04 - Level 4 Diploma for Non-domestic Energy Assessors (Domestic Energy
Assessor Qualified) ........................................................................................................................... 42
Construction Section ............................................................................................................................. 42
Working at Height .............................................................................................................................. 42
Asbestos Awareness ......................................................................................................................... 43
Health and Safety Awareness for Operatives ................................................................................... 43
Health and Safety Awareness for Managers and Supervisors.......................................................... 43
NEBOSH National General Certificate in Occupational Health and Safety ...................................... 44
Manual Handling ................................................................................................................................ 44
Cost ................................................................................................................................................ 44
Control of Substances Hazardous to Health (COSHH) Regulations................................................. 44
Refrigeration Section ............................................................................................................................. 45
Foundation in Small Refrigeration and Air Conditioning Systems..................................................... 45
CITB Pipework & Brazing (J05) ......................................................................................................... 45
CITB F-Gas Refrigerant Handling + Reassessment ......................................................................... 46
4
About South West Assessment and Training
South West Assessment and Training is an award winning training provider offering a wide portfolio of
training including Plumbing, Gas, Oil, Electrics, Green Deal Assessments and Health & Safety.
All qualifications offered are from UKCAS accredited awarding bodies including BPEC, City & Guilds,
and EAL and are recognised, where appropriate, for registration with Competent Persons Schemes
(CPS) and Microgeneration Certification Schemes (MCS).
Courses range from those suitable for new entrants to up-skilling for existing tradespersons, with our
key focus on delegate support.
This year we are adding NEBOSH General Certificate to our portfolio.
The centre has been designed and equipped to offer the ideal learning environment for all of our training,
which is of the highest standard. Wherever possible we have a very low student to trainer ratio and
the highest quality training equipment.
Advantages of training at SWAAT are:
• Students are provided with the training to suit their requirements and to the highest possible
standard
• Low student to trainer ratio
• A wide range of the highest quality training equipment
The centre boasts unique custom-built training areas and our air conditioned classrooms are each
equipped with teaching screens and an environment to ensure the theory part of your course is
delivered with your education and comfort in mind.
For more details please visit the SWAAT website (www.swaat.co.uk) or call us on 01579 348544.
Training Facilities
The centre and staff provide a relaxed, friendly environment with first class facilities to enable our
customers to achieve their qualifications.
As well as two spacious and comfortable classrooms for theory study, the centre has separate
plumbing, electrical, refrigeration, natural gas, LPG and oil training workshops, as well as up-to-date
equipment.
The centre is also very proud to offer training on the latest Ariston and Viessmann heating appliances
and hot water cylinders.
5
Meet The Team!
Mike Kent – Centre Manager
As well as running the centre Mike is an assessor as well as running the APHC
Solid Fuel and BPEC Biomass courses.
With over 40 years’ experience in the plumbing, heating and refrigeration
industries Mike is well aware of how the work-place has evolved over the years
and the need for updating key skills and knowledge.
Sally Kent – Trainer/Assessor
Sally has a wealth of experience in the heating, electrical and renewables
industries and has since turned her skills to the refrigeration industry, chiefly
heat pumps and air conditioning. In her spare time she likes to read the 17 th
Edition book and re-wire her home.
Kevin Kendall – Trainer/Assessor
An experienced gas service and breakdown engineer who has found his 'niche'
in training.
Happy to share his wealth of knowledge and experience with whoever will listen
to him, Kev has proven to be an invaluable key player in the company, running
many of the courses we offer.
Claire Skews – Administrator
Claire has been with South West Assessment and Training for over five years
now and is a much valued member of the team. Along with Josie she is the
person to speak to when you aren’t sure what qualification you need to
undertake.
Josie Wilkinson – Administrator
Josie keeps a ‘tight ship’ at SWAAT making sure that assessment materials are
in place before they commence as well as ensuring that as soon as they are
completed they are processed.
Paul Lower – Facilities Manager
For many, Paul is the first face they’ll see when they arrive at SWAAT as he is at
the centre bright and early every day making sure that everything is ready.
6
Case Studies
Anna Gubbins
Anna is an oil heating engineer who came to South West Assessment
and Training to undertake the OFTEC Oil course to enable her to carry
out commissioning and servicing of oil appliances.
She states "The course provided me with the confidence to know I could
go out on my own to service oil fired boilers. The Oftec books are also
useful tools and we learnt about new regulations as well as the practical
side to servicing boilers.
SWAAT is local to us and were very helpful in accommodating me on dates
which were convenient to me. I would definitely recommend SWAAT to
others as the whole team are friendly and approachable, and I know I could
ring up with questions and they would do their best to help me”.
M.K. Pipework
M.K. Pipework is a commercial pipe fitting company who, after undertaking training previously at
the centre came to us for help in putting together comprehensive health and safety policies and
procedures to ensure the safety of their employees.
Kevin sat down with the directors of the company and systematically went through their current
practices and how they approach each task from a health and safety perspective. He then
suggested some minor changes to these practices and put in place a number of method
statements, risk assessments, policies and safer working practices. As a result the company were
able to gain ‘Safe Contractor' status and have since been awarded a number of contracts that were
previously unobtainable.
Managing Director Matt Lewis says; “Without the help of South West Assessment and Training
and especially Kevin, we would never have been able to work on the projects we are currently
working on. We found the whole process of dealing with health and safety daunting but SWAAT
made it common sense and, as such, we now have a much safer working environment”.
7
How to book a course
Booking a course or training package is very straightforward.
Contact our office on 01579 348544 and speak to our admin team or, alternatively, email us at
swaat@btconnect.com and we can provide details of course dates and Cost before a booking is made.
Payment can be made by all major debit / credit cards (excluding American Express).
We also accept bank transfers and CHAPS payments. Larger organisations may apply for Account
Facilities with us - please call for more details.
Online Resources
At SWAAT we believe in supporting our customers before, during and after they attend a training event.
Our website features a FREE comprehensive online resource section for all our customers containing
over 5000 manufacturer instruction manuals, the complete set of British Standards, exclusive online
training courses, video content and much more.
Onsite Training
A number of courses can be undertaken 'on-site' at the customer's premises. These courses are;
QCF Level II Award in Gas Safety Awareness in Residential Premises
Electrical Courses
Basic Electrics - One day course
Basic Electrics
City & Guilds 2377-22 - Portable Appliance Testing (PAT)
City & Guilds 2382 17th Edition Wiring Regulations (Full Course)
City & Guilds 2382 17th Edition Wiring Regulations Amendment No. 3 (Update Course)
BS7909 - Temporary Electrical Supplies
Emergency Lighting
Fire Alarm Design and Certification to BS5839 Parts 1 and 6
Marine Electrics
Water Regulations
Unvented Hot Water Reassessment
BPEC Renewable Energy Awareness
Energy Efficiency (Part L1)
Green Deal Installer Training (PAS2030)
Microgeneration Certification Scheme (MCS) Accreditation Advisory Course
RHI Metering Course
City & Guilds 6066 - Green Deal Assessor
Foundation Certificate in Basic Heating and Hot Water System Design and Specification
Health and Safety Awareness for Operatives
Health and Safety Awareness for Supervisors and Managers
EAL Level 1 Health and Safety in a Construction Environment
NEBOSH National General Certificate Training
Asbestos Awareness
Control of Substances Hazardous to Health
Fire Warden Training
Manual Handling
QCF Level 2 Award in Gas Safety Awareness in Residential Premises (including Social Housing)
8
How to find us
Directions from Bodmin/St Austell:
Take the A38 through the Glynn Valley passing Trago Mills on the right hand side. At the Dobwalls
roundabout take the first exit for Liskeard and follow the bypass down the hill heading in the direction
of Plymouth.
Do not take the first junction off for Liskeard on the left hand side but instead continue a short distance
and take the next turning on the left signposted for Callington. At the small roundabout adjacent to the
Premier Inn (Liskeard Tavern) take the first exit, arriving at another roundabout opposite Morrisons
supermarket.
Take the third exit and follow the road up the hill heading for Callington. The South West Assessment
and Training (SWAAT) building is almost at the top of the hill on the right-hand side. However if you
reach Liskeard Hospital you have driven too far!
From Plymouth:
Cross Tamar Bridge and at roundabout take the 2nd exit onto the A38 Signposted Liskeard. At next
roundabout take the 3rd exit onto the A38 Signposted Liskeard A390.
At Island Shop junction branch left, then at roundabout take the 2nd exit onto the A390 Signposted
Liskeard, Bodmin. At roundabout take the 3rd exit onto the A390 Signposted Tavistock.
At roundabout (opposite Morrisons Supermarket) take the 2nd exit onto the A390 Signposted
Callington, Tavistock. The South West Assessment and Training (SWAAT) building is almost at the top
of the hill on the right-hand side. However, if you reach Liskeard Hospital you have driven too far!
9
LOGIC Water Regulations
Introduction
In 1999 local Water Byelaws in England and Wales were replaced by the Water Supply (Water Fittings)
Regulations 1999.
This course is designed to update candidates with the relevant information and assess their
knowledge.
Entry requirements/pre-requisites
The course requires candidates to have a knowledge and understanding of plumbing and heating
systems and is ideally suited to existing plumbing engineers who should hold an NVQ in Plumbing at
level 3 or equivalent (e.g. City & Guilds Advanced Craft) or who has suitable practical plumbing
experience.
Course duration
One day.
Cost
£95 + £55 + VAT certification fees.
10
LOGIC Unvented Domestic Hot Water for New Entrants
Introduction
Unvented hot water has become ever more popular in the U.K over the past few years being fed directly
from the cold water mains supply. This course covers the legal requirements for installing this type of
hot water cylinder.
The course requires candidates to have a knowledge and understanding of plumbing and heating
systems and is ideally suited to existing plumbing engineers who should hold an NVQ in Plumbing at
level 3 or equivalent (e.g. City & Guilds Advanced Craft) or who has suitable practical plumbing
experience.
Plumbers currently practicing in industry, who do not hold an NVQ (or equivalent) but have suitable
experience at this level, can also undertake this course. Anyone who has previously held an unvented
hot water certificate at any time in the past can undertake the Unvented Hot Water reassessment
course, if they can provide evidence of this by way of a certificate or their operative's card.
Course duration
One day
Cost
LOGIC Unvented Domestic Hot Water Reassessment
Introduction
Unvented
hot
water
is
one
of
the
fastest
growing
sectors
of
the
U.K.
Unvented systems are fed directly from the cold water mains supply and offer a number of benefits
compared to conventional systems, such as;
• Higher pressures and flow rates at all hot taps
• Balanced hot and cold supplies
• No special terminal fittings required.
Evidence of the existing qualification must be provided by way of a certificate or their operative's card.
Course duration
One day
Cost
£77.50 + £55 + VAT certification fees
11
LOGIC Certification Disinfection and Risk Assessment of Water Systems for
Legionella
Introduction
Under general health and safety law it is a legal requirement of employers and persons in charge of
buildings to consider the risks from legionella.
This course covers the requirements of the revised Approved Code of Practice (ACOP) and guidance
for Legionnaires disease, as well as the requirements for disinfection of hot and cold water systems.
Anyone undertaking this course should have a good understanding of hot and cold water plumbing
systems.
Ideally they should also hold a recognised Water Regulations qualification.
Course duration
One day
Cost
£175 + £55 certification fees+ VAT
BPEC Installation of Above Ground Sanitary Pipework and Rainwater Systems
in Domestic Properties
Introduction
This training course has been designed to provide relevant knowledge and information regarding
sanitary and rainwater pipework systems under the requirements of Building Regulations Competent
Persons Schemes.
Delegates should have a good knowledge and understanding of plumbing and drainage systems.
Course duration
One day
Cost
£170 + VAT (No certification fee)
12
BPEC Rainwater/Greywater Harvesting
Introduction
Fresh water is an extremely limited and precious resource. In fact, less than 3% of all water on the
planet is considered "fresh" (source: “Human Appropriation of the World's Fresh Water Supply”).
During the 21st century, it is estimated that the demand for water is going to increase dramatically, to
such an extent that the government is now looking at more sustainable approaches for water
conservation.
This is a hands-on course with interactive seminars and practical demonstration.
Anyone undertaking this course should have a knowledge and understanding of plumbing principles.
Course duration
One day
Cost
£125 + VAT plus £55 certification fees
Logic Certification Foundation Certificate in Basic Heating and Hot Water
System Design and Specification
Introduction
The course is designed to give a good level of understanding which will allow the operative to design
and specify basic domestic heating systems and size hot water storage cylinders. The course will also
act as a stepping stone for operatives who wish to go on and complete the Institute of Domestic Heating
& Environmental Engineers (IDHEE) full diploma course.
There are no entry/pre-requisite requirements to undertaking this course. However knowledge of
plumbing and heating systems will be beneficial.
Course duration
Two days
Cost
£180 + £55 + VAT certification fees
13
Gas Section
SWAAT offers a number of Domestic, LPG and Commercial courses. These include;
DOMESTIC
 Foundation Gas
 Fast Track Gas
 New Entrant Gas Assessment
 Gas Appliance “add ons”
 Re-assessment Training
 Gas re-assessment
 ACOPS gas course
 REGT1 Medium Pressure
 CMDDA1
 Boiler Fault Finding
 City and Guilds 6132 - Technical Certificate in Domestic Natural Gas Installation and
Maintenance
 City and Guilds 6012 - NVQ Level 2 in Gas Installation and Maintenance
 Logic Certification Foundation Certificate in Basic Heating and Hot Water System Design and
Specification
LPG







New Entrants LPG (CCLP1)
LPG Training
Nat. Gas to LPG
LPG “add ons”
VESLP 1
VESLP 2
Electro Fusion Welding
COMMERCIAL
 Commercial Pipework
 Commercial Heating Training/assessments
 Commercial Catering Training/assessments
 Commercial Laundry Training/assessments
14
Domestic BPEC Foundation Level Gas Course
Introduction
An in-depth course designed for new entrants to the gas industry (categories 2 and 3) to meet the core
ACS assessment requirements.
Candidates need no previous qualifications, but should either be working or have worked under
supervision within the gas industry and gained practical experience, with evidence provided
in a BPEC Foundation Level Gas Portfolio, available directly from BPEC on 0845 644 6558. Only upon
successful completion of the Foundation Gas Course will candidates be able to proceed to undertake
the ACS assessment(s) and any add-ons.
Course duration
Ten days in total. This consists of five days at the South West Assessment and Training centre in
Liskeard, Cornwall, ten working days continuing to gather evidence with a Gas Safe Registered
operative (which must be organised by the candidate), and then a further five days back at the South
West Assessment and Training centre in Liskeard, Cornwall.
Cost
£950 + VAT + £37 (viper book) + £75 (Portfolio)
BPEC Fast Track Gas Course
Introduction
An in-depth course designed for both experienced gas engineers whose qualifications have lapsed and
new entrants to the gas industry (category 2) who hold an NVQ Level 3 in plumbing (or equivalent), to
meet the core ACS assessment requirements.
In order to undertake the course candidates will need to provide evidence of either NVQ Level III
qualification in plumbing or equivalent, or evidence of previous ACS assessments and/or CORGI or
GAS SAFE registration (which are no longer current). There may also be an additional need to provide
evidence that the person is currently working under supervision within the gas industry (in the form of a
letter from their employer).
Course duration
Five days
Cost
£550 + VAT
15
Natural Gas Initial Assessment for New Entrants (CCN1)
Introduction
A pre-requisite assessment for all other appliance assessments and covers all aspects of gas safety
and legislation.
.
Candidates will need to have either successfully completed the Foundation Gas course or Fast Track
Gas course, or be able to provide sufficient evidence that they have the required skills and knowledge
enabling them to undertake this assessment (i.e. be experienced to Category 1).
Course duration
One week should be sufficient to complete this assessment. However this is dependent on the number
of add-ons undertaken.
Cost
Cost will differ depending on what add-ons are required, please contact our office on 01579
348544 for a quote.
Domestic Natural Gas Individual Appliance Assessments (add-ons)
Introduction
Assessments for individual domestic natural gas appliances, for anyone wishing to 'add on' to their
existing domestic gas qualifications.
The add-ons available are;
CMDDA1 – Carbon Monoxide/Carbon Dioxide atmosphere and appliance testing
CENWAT1 – Domestic central heating/hot water boilers AND Water Heaters (less than 70kW net
input)
CESP1 – Natural gas core emergency service provider
CKHB1 – Domestic range cookers/boilers (flued cookers such as Rayburns)
CKR1 – Domestic natural gas cookers
CPA1 - Domestic combustion performance analysis on gas-fired appliances
DAH1 – Natural gas domestic ducted air heaters
HTR1 – Domestic gas fires and wall heaters
HWB1 – Hot water boilers 15 – 140Kw (swimming pool boilers)
LAU1 – Natural gas domestic laundry appliances
MET2 - Domestic natural gas meters (install/exchange primary and secondary meters)
MET3LS – Meter installations gas safety
MET4 – Diaphragm gas meter installations
Candidates will need to have either successfully completed the Domestic Natural Gas Core Assessment
(CCN1) or be able to provide sufficient evidence that they have passed this assessment at another
college or assessment centre.
Course duration
Generally half a day per 'add-on' undertaken is sufficient.
However, the duration of the assessment(s) depends upon how many and which assessments are
being undertaken.
Cost
Cost will differ depending on what add-ons are required, please contact our office on 01579
348544 for a quote.
16
Domestic Natural Gas Re-assessment Training
Introduction
A two-day refresher course designed to assist previously trained operatives to update their existing
domestic natural gas knowledge and understanding to meet the core ACS assessment requirements.
Gas operatives must be qualified to category 1.
Course Duration
Two days
Cost
£180 + VAT
Domestic Natural Gas Re-assessment
Introduction
Five yearly re-assessment of Domestic Natural Gas qualifications covering all aspects of gas safety
and legislation. PLEASE NOTE: This assessment can be taken up to six months before expiry of
the original end date and the new accreditation dated appropriately (i.e. no time lost on existing
qualification).
Anyone undertaking the assessment should have appropriate domestic natural gas qualifications which
are still within date. Evidence of existing domestic natural gas qualifications in the form of certificates
need to presented to our office prior to undertaking the assessment.
Course duration
Dependant on the number of add-ons undertaken
Cost
Vary dependant on number of ‘add-ons’ undertaken
17
ACOPs Gas Course (for domestic, commercial or liquid petroleum gases)
Introduction
This course provides anyone involved in the design or construction of domestic and non-domestic
buildings, or anyone who may work with natural or liquid petroleum gas, information regarding their
obligations under the Gas Safety (Installation and Use) Regulations 1998, as well as other relevant
legislation.
Part B, 8(1) of the Gas Safety (Installation and Use) Regulations 1998 lays down the requirement that
anyone working at a property must not affect the gas safety in any way (with regard the pipework,
ventilation provisions, flue etc.)
This course aims to make delegates fully aware of their obligations and requirements.
There are no entry or pre-requisite requirements to undertaking this course.
Course duration
This course is usually run over two days.
However, it is tailored to suit the company's/individual's needs so please contact our office on 01579
348544 if you require a different time scale.
Cost
Varies dependant on duration and individual requirements - please contact our office on 01579
348544 for further information.
18
Medium Pressure Gas Meters (REGT1) Training and Assessment
Introduction
This training and assessment course is designed to both train and test the gas safety competence of
an operative in the work of installing, testing & commissioning domestic medium pressure meter
regulators.
(CCN1) or be able to provide sufficient evidence that they have passed this assessment at another
college or assessment centre.
Course duration
Training: ½ Day (subject to minimum number of candidates)
Assessment: ½ Day
Cost
£95 + VAT + £55 certification fees
CMDDA1 Training and Assessment (Carbon Monoxide Investigation)
Introduction
CMDDA1 - carbon monoxide/carbon dioxide atmosphere and appliance testing - is designed to address
the investigation of reported fumes, smells or leakage of combustion products in domestic premises for example, following the activation of a CO alarm - through the use of a portable electronic combustion
gas analyser (ECGA).
Please note: it does not cover the competencies required to investigate the cause of established
incidents, such as those that have resulted in major injury or fatality and whose
Candidates must hold up-to-date ACS qualifications in domestic natural gas.
Course duration
Two days
Cost
£190 + VAT + £55 certification fees
19
Domestic LPG Initial Assessment for New Entrants (CCLP1)
Introduction
A pre-requisite assessment for all other LPG appliance assessments and covers all aspects of gas
safety and legislation.
Candidates will need to have either successfully completed the BPEC Foundation Gas course or Fast
Track Gas course, or be able to provide sufficient evidence that they have the required skills and
knowledge enabling them to undertake this assessment (i.e. be experienced to Category 1).
Course duration
One week should be sufficient to complete this assessment. However this is dependent on the number
of add-ons undertaken.
Cost
£310 + VAT + £55 (Core Only)
LPG training (conversion from Natural Gas)
Introduction
Training course covering all aspects of gas safety specifically designed for those wishing to achieve the
LPG changeover from Natural Gas.
Candidates undertaking this training/assessment must hold a current and relevant ACS core gas
qualification.
Course duration
One day
Cost
£90 + VAT
20
LPG Assessment (Conversion from Natural Gas to LPG - CONGLP1)
Introduction
This is the assessment for converting natural gas qualifications to LPG and is a pre-requisite
assessment for all other LPG appliance assessments, without holding an existing LPG core
qualification. The qualification is required if candidates wish to undertake work within the LPG sector
within domestic properties and residential park homes (defined as log cabins or chalets). If the
candidate wishes to work on mobile homes (static caravans) or touring caravans they will need to
undertake this Natural Gas to LPG conversion plus the Leisure Accommodation Vehicles (LAV)
assessment.
PLEASE NOTE: This is the same qualification required for anyone ‘re-assessing' for their
existing LPG changeover qualification.
Candidates will need to have a current domestic or commercial/industrial core gas safety qualification.
Evidence of this natural gas qualification will need to be proven with the relevant and most up-to-date
certificate(s), at the start of the course.
Course duration
One day should be sufficient for the changeover assessment.
Half a day should be sufficient per add-on taken in addition.
Cost
£160 + VAT + £55 (changeover only)
LPG 'Add-on' Assessments
Introduction
Assessments for individual LPG gas appliances, for anyone wishing to 'add on' to their existing LPG
gas qualifications.
The add-ons available are;
LAV – Leisure Accommodation Vehicles (static holiday homes, touring vans and towed caravans)
Boats
CMC - Commercial Mobile Catering (PLEASE NOTE: Candidates will also need to hold a core
commercial gas qualification or appropriate changeover as well as the relevant COMCAT qualifications)
HTRLP2 - Closed Flue LPG Gas Fires (Widney and Spinflo fires etc.)
HTRLP3 - Caravan LPG Gas Fires (Truma caravan fires etc.)
REFLP2 - Caravan LPG Refrigerators (Electrolux RM122 refrigerators etc.)
WATLP2 - Caravan LPG Water Heater (Carver Cascade 'under bench' water heaters etc.)
(CCN1) or Commercial/Industrial Core Assessment (CCCN1), or be able to provide sufficient evidence
that they have passed this assessment at another college or assessment centre.
Course duration
Generally half a day per 'add-on' undertaken is sufficient. However, the duration of the assessment(s)
depends upon how many and which assessments are being undertaken.
Cost
£65 + VAT Per Appliance plus £55 certification
21
Installation and Commissioning of LPG Gas Storage Vessels and Controls
(VESLP1)
Introduction
This is an assessment only which covers the installation and commissioning of LPG gas storage
vessels and controls (Single LPG Supply) with up to 32mm Pipework.
Candidates will need to have either successfully completed the core LPG assessment (CCLP1), or
conversion from natural gas to LPG assessment, or be able to provide sufficient evidence that they
have passed this assessment at another college or assessment centre.
Course duration
One day is usually sufficient to complete this assessment
Cost
£95 + VAT + £55
Installation and Commissioning of LPG Gas Storage Vessels and Controls
(VESLP2)
Introduction
This is an assessment only which covers the installation and commissioning of LPG gas storage
vessels and controls (Single LPG Supply) with up to 63mm Pipework.
Candidates will need to have either successfully completed the core LPG assessment (CCLP1), or
conversion from natural gas to LPG assessment, or be able to provide sufficient evidence that they
have passed this assessment at another college or assessment centre.
Course duration
One day is usually sufficient to complete this assessment
Cost
£125 + VAT + £55
22
Electro-fusion Welding
Introduction
Introduction to common thermoplastics (MDPE, PVC, PP, PE, PVDF); key processing techniques; joint
preparation; defects and how to avoid them; process control, inspection and testing, health and safety;
practical electro-fusion welding in polypropylene or polyethylene pipework.
There are no pre-requisites to anyone wishing to undertake this training and/or assessment.
Course duration
One day
Cost
£145 + VAT + £55
Commercial/Industrial Pipework
Introduction
South West Assessment and Training offer assessment for commercial gas installations and
appliances.
Training and assessment is available for pipework installation, testing and purging, industrial heating
appliances and commercial catering appliances.
Any operatives undertaking the individual appliance assessments must hold an appropriate
industrial/commercial core gas safety qualification or relevant changeover qualification.
Course duration
1 day training for each assessment and 1 to 2 days for actual assessment.
Cost
£90 (Per day for training) and £95 (per assessment) + VAT + £55
23
Commercial/Industrial Heating
Introduction
appliances.
industrial/commercial core gas safety qualification or relevant changeover qualification.
ICPN1
ICPN1LS
ICAE1
CIGA1
CDGA1
CORT1
CLEI1
CMET1
CMET2
First Fix Pipework in excess of 35mm
As Above but Limited Scope
First Fix Commercial Appliances: Installing commercial equipment
Indirect Fired Heating Appliances:
Installing, commissioning, servicing indirect fired heating appliances
Direct Fired Heating Appliances:
Installing, commissioning, servicing direct fired heating appliances
Radiant Plaque and Radiant Tube Heaters:
Installing, commissioning, servicing radiant plaque and tube heaters
Commercial Laundry Equipment
Commercial Meters
Install & Commission Commercial Low Pressure Diaphragm (U65 and above)
and RPD meters
Commercial Meters
Install & Commission Commercial Turbine Meters
Course duration
The duration of the assessment depends upon the number of assessments taken
Cost
£90 per day training (recommended at least 1 day)
COCN1: £310 + VAT / CODNCO1: £220 + VAT / Appliances: £95 each + VAT / Certification £55
24
Commercial/Industrial Catering
Introduction
appliances. .
industrial/commercial core gas safety qualification or relevant changeover qualification (see below for
these assessments).
COMCAT1
COMCAT2
COMCAT3
COMCAT4
COMCAT5
CMC
COCATA1
Open/Solid Top Ranges
Water Boilers (Pressure Type)
Deep Fat & Pressure Fryers
Fish & Chip Fryers (on-site assessment only)
Forced Draught Equipment
Commercial Mobile Catering Equipment.
COMCATS 1 & 3
Course duration
The duration of the assessment depends on a several factors, including the number of assessments
taken. Please contact the office for further details.
Cost
£90 per day for training (recommended at least 1 day)
CCLING1:£310 + VAT
CoCCLNG1: £220 + VAT
Appliances: £95 Each
25
Electrical Section
Basic Electrics
Introduction
This three day course combines the essential knowledge and understanding of safe electrical good
practice with "hands on" experience of using the necessary tools and equipment.
The course is ideal for technical staff who may not be qualified electricians but require the basic
knowledge in order to disconnect, reconnect and diagnose faults safely on electrical equipment.
There are no entry/pre-requisite requirements to undertaking this course.
Course duration
Three days
Cost
£275 + VAT
City and Guilds 2382-12: 17th Edition Wiring Regulations
Introduction
This course is intended to ensure that all who undertake the course are up-to-date with the format,
content and applications of BS7671. The course is also suitable for those who may require a working
knowledge of BS7671, for example architects or designers.
Candidates should also have a working knowledge of electrical installations.
For anyone new to electrical work, or who would like to update their knowledge and skills, it is highly
recommended that they undertake the Basic Electrics course prior to this course.
Course duration
The course is run over five days – four days are for training and one-day is the assessment.
There is some home study and the course is very intensive!
Cost
£330 + VAT + £35 (Please note: Additional books will also be required for this course. Contact our
office for details)
26
City and Guilds 2382 17th Edition Wiring Regulations Amendment No. 1 - One
Day Update
Introduction
This is a one-day training course (with exam) which will concentrate on informing delegates about the
amendment to the 17th Edition Wiring regulations and how this may affect them at work.
Candidates should have an excellent understanding of electrical installations as well as holding a 17th
Edition qualification.
Course duration
One day
Cost
£130 + VAT + £35 (Please note: Additional books will also be required for this course. Contact our
office for details)
EAL 7695 Electrical Qualified Supervisor Course
Introduction
From 6th April 2013, any business or self-employed person that registers on a Domestic Installer or
Competent Person scheme must have a suitably qualified Supervisor who is responsible for the safety,
technical standards and quality of all electrical installation work within a business.
Anyone wishing to undertake this course must have a minimum of a current 17th Edition electrical
qualification.
Course duration
Dependant on candidate's experience.
Two options are available;
OPTION ONE:
For qualified experienced candidates (minimum of City and Guilds or EAL Inspection and Test
qualification); Five days at the centre, plus 1 day a month for a maximum of 12 months.
OPTION TWO:
For new/less experienced candidates; Three weeks (not concurrent) which will also include Part P
and 17th Edition within the same course, plus 1 day a month for a maximum of 12 months.
Cost
For qualified experienced candidates: £885 + VAT + Certification + 2 x onsite visits (£75 - £150).
For new/less experienced candidates: £1459 VAT + Certification + 2 onsite visits (£75 - £150)
27
EAL NVQ2/3 Electrical Installations - Part Time
Introduction
This electrical installation course is ideally suited to anyone thinking about Electrical Engineering as a
career but who would like some experience of the job role first, or wish to learn new skills.
This course is aligned to the QCF framework.
There are no pre-requisites to undertaking this course.
Course duration
NVQ2 and NVQ3 can be gained over 1 year each. However in some cases we are able to fast track
the qualification; this is dependent on your ability to complete set criteria of NVQ, collecting evidence
on site in your work.
Cost
Prices vary depending on individual knowledge/experience
BPEC Part P course
Introduction
South West Assessment and Training has devised a training package to cover the requirements of
domestic installation and at the end of the course students will have a sufficient level of competence,
so that once registered with a relevant body, they will be able to work safely, efficiently and legally on
electrical equipment.
Candidates should have a knowledge and understanding of domestic electrical installations.
Course duration
Five days should be allowed for, due to the nature of the practical assessment
Cost
£460 + VAT + £55
Domestic Periodic Inspection and Testing of Electrical Installations
Introduction
This is an ‘in-house’ course that provides knowledge and some practical experience for those electrical
installers who wish to go on to issue Periodic Inspection Reports for domestic properties.
It does not deal with non-domestic installations or three-phase systems. This is not a formal
qualification so anyone wishing to issue Periodic Inspection Reports and/or work on non-domestic
systems should also consider attending the EAL Inspection and Testing course offered.
Anyone undertaking this course must hold a 17th Edition electrical qualification.
Course duration
Five days
Cost
£250 + VAT (Please note: Additional books will also be required for this course. Contact our office for
details)
28
EAL Level 3 Award in the Initial Verification and Certification of Electrical
Installations
Introduction
This qualification provides an understanding of the theory and practice involved in the initial verification
and commissioning of single and three phase electrical installations.
Successful learners will gain the knowledge to work safely in line with industry safety standards,
including BS 7671 and the IET Guidance Note 3.
Candidates should have basic knowledge and understanding of electrical science and principles and
experience of electrical installation work either within the electrical contracting industry or an allied
trade. Candidates must also hold a 17th Edition Qualification. It is highly recommended that anyone
wishing to undertake this course first undertakes the Domestic Periodic Inspection and Testing of
Electrical Installations course offered.
Course duration
5 days (or 7 if taken with the periodic inspection, testing and condition reporting course)
Cost
£595 + £55 + VAT
EAL Level 3 Award in the Periodic Inspection, Testing and Certification of
Electrical Installations
Introduction
The course has been developed for those candidates who need an advanced level qualification in
carrying out periodic inspection and testing and correct completion of all relevant documentation.
Candidates must hold both a 17th Edition qualification as well as the EAL Level 3 Award in the Initial
Verification and Certification of Electrical Installations. It is highly recommended that anyone wishing
to undertake this course first undertakes the Domestic Periodic Inspection and Testing of Electrical
Installations course offered.
Course duration
2 days (or 7 if taken with the EAL Level 3 Award in the Initial Verification and Certification of Electrical
Installations)
Cost
£350 + £55 + VAT
29
City and Guilds 2393 - Certificate in the Building Regulations for Electrical
Installations in Dwellings
Introduction
This is a training course followed by an online exam which covers all aspects of Building Regulations
Part P. It allows successful candidates to work within the mandate of Part P and is designed for
experienced electricians with existing current qualifications as an alternative to undertaking the full Part
P course. It is also suitable for those who require a working knowledge of how installations can affect
building construction.
Candidates should hold a 17th Edition qualification (BS7671) or equivalent (such as a City and Guilds
2360 Part 1 or City and Guilds 2330 level 2 qualification).
Course duration
One day (Half a day training followed by the examination)
Cost
Please ring our office on 01579 348544 for details of pricing
City and Guilds 2377-22 Portable Appliance Testing (PAT testing)
Introduction
To meet the requirements of those who are contracted to maintain and test electrical equipment, or who
wish to undertake such work.
Candidates should have a knowledge and understanding of domestic electrical installations.
For
anyone new to electrical work, or who would like to update their knowledge and skills, it is highly
recommended that they undertake the Basic Electrics course prior to this one.
Course duration
Two days (One and a half days of training followed by the examination)
Cost
£195 + Vat + £39.30 (Please note: Additional books will also be required for this course. Contact our
office for details)
BS7909: Temporary Electrical Supplies
Introduction
This course deals with the requirements of BS7909: 2008 - The Code of Practice for the creation and
operation of Temporary Electrical Systems for Entertainment and Related Purposes.
Candidates should possess an understanding of electrical principles together with an appreciation of
electrical installation working practices. They should also hold a current City & Guilds 2382: 17th Edition
qualification.
Course duration
One day (including assessment).
Cost
£120 + VAT
30
BPEC Electricity for Plumbers
Introduction
This course is ideally suited for Plumbers and Heating engineers who would like to improve their
knowledge of electrical wiring and fault finding on domestic heating systems.
The pre-requisite for attending the course is that the person holds as a minimum; ACS CCN1 or CCLP
and CEN1 or CENWAT1 certificates.
Course duration
Three days
Cost
£275 + VAT
Oil Section
OFTEC Oil 50 - Introduction to Domestic Oil Fired Appliances
Introduction
This is a practical course designed for operatives lacking or with no experience of domestic oil
installations and is designed to give more intensive and detailed practical training than the standard
courses, which are aimed at experienced operatives.
Anyone undertaking this course must have basic plumbing skills. Knowledge of heating systems will
also be highly advantageous.
Course duration
Five days
Cost
£485 + VAT
OFTEC 105e - Installation of Domestic Pressure Jet Oil-fired Appliances
Introduction
This is a practical course designed for experienced operatives in the installation of pressure jet oil
appliances.
Candidates undertaking this course must either be experienced oil operatives, or GAS SAFE
registered heating system operatives (PLEASE NOTE: Proof of previous qualifications will be
required at the start of the course).
Course duration
One day training is available for OFTEC 105e. One day should be sufficient to complete the OFTEC
105e assessment (in addition to any training undertaken).
Cost
£90 + VAT Training (per day)
£155 + VAT plus £55 certification for Assessment (Please note: OFTEC books will also be required
for this course)
31
OFTEC 101 - Commissioning and Servicing of Pressure Jet Oil Heating
Appliances
Introduction
This is a practical course designed for those who are either new to commissioning or servicing pressurejet oil appliances or who have previously held the qualification but wish to update their skills and
knowledge.
Candidates undertaking this course must either be experienced oil operatives, or GAS SAFE registered
heating system operatives (PLEASE NOTE: Proof of previous qualifications will be required at the
start of the course).
Course duration
One day of training is available for OFTEC 101. One day should be sufficient to complete the OFTEC
101 assessment (in addition to any training undertaken).
Cost
£155 + VAT + £55 Assessment (Please note: OFTEC books will also be required for this course)
OFTEC 102 - Commissioning and Servicing of Vaporising Oil-Fired Appliances
Introduction
This is a practical course designed for operatives with limited experience in working with vaporising oil
appliances.
Anyone new to the oil industry should consider attending our OFT50 course for new entrants.
Course
duration
One day training is available for OFTEC 102. One day should be sufficient to complete the OFTEC
102 assessment (in addition to any training undertaken).
Cost
for this course
32
OFTEC 600A - Oil Tank Installations
Introduction
This is a practical course designed for experienced operatives and is designed to provide an up-to-date
refreshment of regulations and the health and safety aspects of installing and carrying out visual
inspection of oil tanks.
Course duration
One day of training is available for OFTEC 600A. One day should be sufficient to complete the OFTEC
600A assessment (in addition to any training undertaken).
Cost
for this course)
OFTEC 201 - Commissioning and Servicing of Pressure Jet Oil Heating
Appliances
Introduction
This assessment is designed for operatives wishing to commission/service commercial pressure jet oil
appliances (appliances of 50kw heat input and above).
Course duration
One day should be sufficient to complete the OFTEC 201 assessment.
Cost
£155 + VAT plus £55 certification for Assessment (Please note: OFTEC books will also be
required for this course)
33
Renewables Section
BPEC Renewable Energy Awareness
Introduction
In the light of rising fuel bills and average gas bills exceeding £1000 a year, BPEC has introduced a
course designed to educate and inform individuals about renewable energy heating and energy
technologies.
Course duration
Two days
Cost
£240 + VAT plus £55 course materials
City and Guilds 6361-01 - Level 3 Diploma for Domestic Energy Assessors
Introduction
This training programme has been designed for those either wishing to become Domestic Energy
Assessors or who wish to progress to qualify as Home Inspectors.
It is for anyone new to this profession and need a comprehensive programme of training and
assessment to deliver the knowledge and skills they will require in their new role.
There are no pre-requisites to undertaking this course. However a knowledge and understanding of
construction methods and/or heating systems will be beneficial.
Course duration
South West Assessment and Training offer two workshops.
A portfolio of evidence needs to be compiled by the candidate in their own time and therefore the
length of the course largely depends upon the individual.
However the portfolio must be successfully completed and signed off as such within two years from
commencement of the course.
Cost
£495 + VAT + £100 Cert Fee
34
City and Guilds 6361-04 - Level 4 Diploma for Non-domestic Energy Assessors
(Domestic Energy Assessor Qualified)
Introduction
This training programme has been designed for those already qualified as Domestic Energy Assessors
and who wish to further develop their skills and carry out Commercial Energy Assessments.
This programme has been designed for those already qualified as Domestic Energy Assessors who
wish to further develop their skills and carry out non-Domestic Energy Assessments.
PLEASE NOTE: For those wishing to carry out non-domestic energy assessments without
carrying out domestic energy assessments, South West Assessment and Training also run an
alternative non-domestic energy assessor course.
Course duration
South West Assessment and Training offer four workshops. A portfolio of evidence needs to be
compiled by the candidate in their own time and therefore the length of the course largely depends
upon the individual. However, the portfolio must be successfully completed and signed off as such
within two years from commencement of the course.
Cost
£900 + VAT plus £100 certification fees.
Microgeneration Certification Scheme (MCS) Accreditation Advisory Course
Introduction
The Microgeneration Certification Scheme certificates microgeneration technologies used to produce
electricity and heat from renewable sources. MCS has been developed to provide consumers with an
assurance that microgeneration products and installation companies meet a robust set of standards.
The MCS is also linked to financial incentives such as Feed-in Tariffs.
Course duration
One day
Cost
£160 + VAT
35
City and Guilds 6066 – Domestic and Commercial Green Deal Assessor courses
Introduction
The Green Deal is aimed at allowing individuals and businesses to make energy efficient improvements
to their homes and buildings with no upfront cost. Green Deal Advisors (GDAs) play an important part
in the process as they are the people to identify and promote the measures needed to reduce the
building's energy bills.
Only those who have previously qualified as a Domestic Energy Assessor are able to undertake this
course.
Course duration
Three days for Domestic course. Five days for Commercial course.
Cost
Please contact our office on 01579 348544 for course prices.
Green Deal Installer Training (PAS 2030)
Introduction
The Green Deal is aimed at allowing individuals and businesses to make energy efficient improvements
to their homes and buildings with no upfront cost.
This course covers the requirements of PAS2030 and the setting up of a Quality Management System
(QMS) as part of the process of becoming a Green Deal Installer.
Course duration
One day
Cost
£105 + VAT
36
LOGIC Solar Domestic Hot Water course (for installers)
Introduction
The solar domestic installation course enables installers to gain the knowledge and skills required to
specify, install, commission and maintain solar domestic hot water systems. During the three day
course, candidates will undertake practical training including commissioning systems and fault-finding.
PLEASE NOTE: A course is available for anyone not involved in installing solar hot water
systems but who require a background knowledge.
Candidates must hold an Unvented Domestic Hot Water qualification, Water Regulations, and an
Energy Efficiency qualification as well as one of the following:





N/SVQ Level 2/3 in Plumbing or equivalent earlier certification that provides evidence of
competence; or
N/SVQ Level 2/3 in Heating and Ventilating (Domestic Installation) or equivalent earlier
certification that provides evidence of competence; or
N/SVQ Level 2/3 in Heating and Ventilating (Industrial and Commercial Installation) or
equivalent earlier certification that provides evidence of competence; or
N/SVQ Level 2/3 in Oil-Fired Technical Services or equivalent earlier certification that provides
evidence of competence; or
N/SVQ Level 2/3 in Gas Installation and Maintenance or equivalent earlier certification that
provides evidence of competence
Course duration
Three days
Cost
£350 + £60 + VAT
LOGIC Groundsource/Airsource Heat pumps
Introduction
Training and assessment covering all aspects of Groundsource and Airsource Heat Pumps.
Candidates must hold an Unvented Domestic Hot Water qualification, Water Regulations, and an
Energy Efficiency qualification as well as one of the following;





N/SVQ Level 2/3 in Plumbing or equivalent earlier certification that provides evidence of
competence; or
N/SVQ Level 2/3 in Heating and Ventilating (Domestic Installation) or equivalent earlier
certification that provides evidence of competence; or
N/SVQ Level 2/3 in Heating and Ventilating (Industrial and Commercial Installation) or
equivalent earlier certification that provides evidence of competence; or
N/SVQ Level 2/3 in Oil-Fired Technical Services or equivalent earlier certification that provides
evidence of competence; or
N/SVQ Level 2/3 in Gas Installation and Maintenance or equivalent earlier certification that
provides evidence of competence
Course duration
Four-Five days
Cost
£410 + £60 + VAT
37
BPEC Groundsource/Airsource Heat pumps - for non-installers
Introduction
The heat pump non-installer's course enables anyone other than installers to gain the knowledge and
skills required to design, specify and sell heat pump systems.
During the two day course, candidates will be provided with the information they require regarding
heat pump systems including current legislation, system selection and design. As with all of our
training at SWAAT, the training is delivered by our team of qualified and experienced tutors.
There are no pre-requisites for undertaking this course although candidates may benefit from taking
the wider scope BPEC Renewables Awareness course before this course.
Course duration
Two days
Cost
BPEC Photo-voltaic Solar (PV)
Introduction
The course provides the knowledge on how to install a solar PV system and takes into consideration
the majority of systems installed in the UK investigating the different system configurations, components
and operating characteristics.
Anyone undertaking this course must have a good electrical knowledge and understanding and
experience of working on domestic or commercial electrical supplies as well as holding a minimum of a
17th Edition qualification and either a Part P or formal craft qualification e.g. N/SVQ3 in Electrical
Installation or equivalent earlier certification that includes inspection and testing.
Course duration
Four days
Cost
38
City and Guilds 2399 - Installation and Testing of Domestic Solar Photovoltaic
Systems
Introduction
This City and Guilds 2399 Certificate is intended for qualified electricians who want to install grid
connected domestic photovoltaic systems that are either integrated into, or retro fitted onto, a domestic
property. It is concerned with domestic systems installation within prescribed specifications and
therefore does not cover design or glazed or curtain wall systems.
It is expected that candidates will be practicing electricians and have appropriate qualifications related
to electrical installation, knowledge of the IEE Wiring Regulations and inspection and testing. Therefore
anyone undertaking this course must have a minimum of a 17th Edition and a commercial Inspection
and Testing qualification.
Course duration
Four days
Cost
From £550 + VAT plus certification (Please note: This varies depending on the type of
certification required. Please contact our office on 01579 348544 for further details)
BPEC G59 - Installation of Photovoltaic Systems up to 100kWp
Introduction
This course is designed for the installation of large scale commercial PV systems up to 100kWp.
Candidates must be qualified to G83 and must hold at least:
NVQ Level 3 in Electro Technical Services; or
City and Guilds 236 (parts 1 AND 2); or
AM1 & AM2; or
City and Guilds 2391/equivalent
Candidates should also hold City and Guilds 2382 (17th Edition).
Electronic or photocopies of qualifications must be provided on the day of the course.
Course duration
One day
Cost
£125 + VAT (in-house certification)
39
APHC Installation of Solid Fuel Appliances and Heating Systems Fed By Solid
Fuel in Domestic Properties
Introduction
This course has been written by the Approved Plumbing and Heat Contractors (APHC) and is a
method of proving competence in the installation of solid appliances and heating systems fed by solid
fuels under the requirements of Building Regulations Competent Persons Schemes.
PLEASE NOTE: Anyone who undertakes and successfully completes this course will need to
register themselves with the APHC Competent Persons Scheme, NOT HETAS.
The course is aimed primarily at practising heating engineers who already have some knowledge of
the fundamental requirements of solid fuel appliances and heating systems.
Course duration
Two days
Cost
£300 + VAT + £55
LOGIC Biomass course
Introduction
The course provides background information to enable engineers to carry out feasibility studies,
professionally advise the client, consider fuel type and storage options as well as design systems and
installations to suit the varying site circumstances.
Candidates need to have a Solid Fuel, Water Regulations and an Energy Efficiency qualification.
Course duration
Three days
Cost
£395 +£55 + VAT
BPEC Rainwater/Greywater Harvesting
Introduction
Fresh water is an extremely limited and precious resource. In fact, less than 3% of all water on the
planet is considered "fresh".
During the 21st century, it is estimated that the demand for water is going to increase dramatically, to
such an extent that the government is now looking at more sustainable approaches for water
conservation.
This is a hands-on course with interactive seminars and practical demonstration.
Anyone undertaking this course should have a knowledge and understanding of plumbing principles.
Course duration
One day
Cost
£125 + VAT plus £55 certification
40
LOGIC Energy Efficiency
Introduction
This course enables candidates to comply with Part L1 of the Building Regulations.
Over the last few years it has become increasingly important to install energy efficient heating systems
in order to deliver reduced carbon dioxide emissions and comply with increased legislation.
Heating installers play a key role in advising householders on which boilers to install. This training
programme will help candidates to understand the relationship between energy to the Building
Regulations and how these will impact on your day-to-day business.
There are no entry/pre-requisite requirements to undertaking this course, although it would be
beneficial to have a basic understanding of heating controls and systems
Course duration
One day
Cost
City and Guilds 6361-01 - Level 3 Diploma for Domestic Energy Assessors
Introduction
This training programme has been designed for those either wishing to become Domestic Energy
Assessors or who wish to progress to qualify as Home Inspectors.
There are no entry/pre-requisite requirements. However a knowledge and understanding of
construction methods and/or heating systems will be beneficial.
Course content
Workshop 1 - Introduction to Diploma and Portfolio Building
Workshop 2 - House Construction, Survey, Heating and Controls/RDSAP Methodology
Workshop 3 - On-site assessment
PLEASE NOTE: Practical assessment must be arranged within 10 miles of Liskeard, otherwise
a fee will be incurred for travelling and time spent on-site
Course duration
South West Assessment and Training offer three workshops. A portfolio of evidence needs to be
compiled by the candidate in their own time and therefore the length of the course largely depends upon
the individual. However the portfolio must be successfully completed and signed off as such within two
years from commencement of the course
Cost
41
City and Guilds 6361-04 - Level 4 Diploma for Non-domestic Energy Assessors
(Domestic Energy Assessor Qualified)
Introduction
This training programme has been designed for those already qualified as Domestic Energy Assessors
and who wish to further develop their skills and carry out Commercial Energy Assessments.
This programme has been designed for those already qualified as Domestic Energy Assessors who
wish to further develop their skills and carry out non-Domestic Energy Assessments.
PLEASE NOTE: For those wishing to carry out non-domestic energy assessments without
carrying out domestic energy assessments, South West Assessment and Training also run an
alternative non-domestic energy assessor course.
Course duration
South West Assessment and Training offer four workshops. A portfolio of evidence needs to be
compiled by the candidate in their own time and therefore the length of the course largely depends
upon the individual. However the portfolio must be successfully completed and signed off as such
within two years from commencement of the course.
Cost
Construction Section
Working at Height
Introduction
This is an ‘in-house’ course which provides anyone involved in work at height, information regarding
their obligations under the Work at Height Regulations 2005, as well as other relevant legislation.
Course duration
One day
Cost
£95 + VAT
42
Asbestos Awareness
Introduction
Asbestos poses a serious threat to health. It is estimated that up to 500,000 non-domestic buildings in
the UK contain some form of asbestos and up to 4,000 people die each year as a result of asbestos
exposure. This figure is set to increase.
There are no entry or pre-requisite requirements
Course duration
Half a day
Cost
£65 + VAT
Health and Safety Awareness for Operatives
Introduction
The construction industry accounts for more than a quarter of all work-related deaths and over 4,000
major injuries every year. For this reason health and safety continues to be at the forefront of the
industry's agenda and is central to the drive to qualify the construction workforce.
Course duration
One day
Cost
£95 + VAT
Health and Safety Awareness for Managers and Supervisors
Introduction
The construction industry accounts for more than a quarter of all work-related deaths and over 4,000
major injuries every year. For this reason health and safety continues to be at the forefront of the
industry's agenda and is central to the drive to qualify the construction workforce.
Course duration
One day
Cost
£95 + VAT
43
NEBOSH National General Certificate in Occupational Health and Safety
Introduction
The National General Certificate is the most widely held health and safety qualification in the UK, this
training course is designed for Managers, supervisors and staff from all types of organisations who
need a broad understanding of health and safety issues. The certificate helps them manage risks
effectively. Many people take the NEBOSH National General Certificate as a first step in a career in
health and safety. It provides a valuable overview, and is a sound basis for further professional study.
Course duration
Two week blocks, with revision for exam, please phone for more information on this course
Cost
Training: £950 + VAT
Exams: £200 + VAT
NOTE: EXAMS ARE CARRIED OUT AT A DIFFERENT LOCATION
Manual Handling
Introduction
A one day course providing an overview of the relevant legislation and issues, followed by a practical
checklist approach for risk assessments which can be applied in most working environments.
Course duration
Half a day
Cost
£65 + VAT
Control of Substances Hazardous to Health (COSHH) Regulations
Introduction
This course provides anyone involved in the handling, storage or use of chemicals or substances
hazardous to health information regarding their obligations under the Control of Substances Hazardous
to
Health
Regulations,
as
well
as
other
relevant
legislation.
It also applies to anyone responsible for the supervision or management of anyone handling, storage
or use of chemicals or substances hazardous to health.
Course duration
Half a day
Cost
£65 + VAT
44
Refrigeration Section
Foundation in Small Refrigeration and Air Conditioning Systems
Introduction
This introduction into the refrigeration and air conditioning industry is designed for engineers who need
to expand their knowledge and experience. Through both classroom-based and hands-on training it
aims to provide a greater understanding of the refrigeration and air-conditioning industries. Learn how
to use tools and equipment of the trade, identify and handle various refrigerants, as well as service and
repair cooling systems. Installation and maintenance of refrigeration and air-conditioning piping and
tubing, electrical apparatus and circuits is also covered.
There are no pre-requisites, although a plumbing/heating background would be highly advantageous.
Course duration
The course is run over ten days, which can be flexibly split over two five day modules.
Cost
CITB Pipework & Brazing (J05)
Introduction
The CITB J05 Pipework and Brazing course is designed to provide those undertaking the training and
assessment with the relevant practical skills and theoretical knowledge to demonstrate competency and
compliance with;
 Pressure Equipment Regulations 1999
 Pressure Equipment Directive 97/23/EC
 Pressure Systems Safety Regulations 2000 (PSSR2000)
There are no pre-requisites for undertaking this course
Course duration
Two days
Cost
45
CITB F-Gas Refrigerant Handling + Reassessment
Introduction
This qualification is accredited by CITB and is designed to enable refrigeration engineers to meet
legal requirements in relation to the qualifications required to work with Fluorinated Greenhouse
Gasses, otherwise known as F-Gasses.
Anyone undertaking this course should have prior experience in the refrigeration industry.
Course duration
Dependant on category undertaken.
Cost
46
Like us on
and keep
up-to-date
with
news of new courses, changes in
legislation and forthcoming course
dates.
www.facebook.com/swaattraining
47

Training and Assessment Prospectus 2016

Transcription

Similar documents

Nebula Hotel.pub

customer information sheet

to your Agusta A109E Power

IntForumAgendaAndRegistration_16Nov2011

list of participating businesses

Moonsail Luxury Self Catering Holiday Home

1 Tottles Court, Westgate Street, Launc

Property PDF

to our 2016 sponsorship brochure

30a Tottles Court, Westgate Street, Launceston