mobile video studios

Transcription

DEC 2010
MOBILE VIDEO STUDIOS
SOLUTIONS FOR VIDEO PRODUCTION
HS-2000
FIVE-INPUT HD MOBILE STUDIO
DN-60
DV/HDV FIELD RECORDER
HD/SD SWITCHERS • MONITORS • RECORDERS • CHROM AKEY • CONVERTERS • CG SYSTEMS
w w w . d a t a v i d e o . u s
TABLE OF CONTENTS
Pages
05-11

MOBILE VIDEO STUDIOS
HS-2000
HS-500

MS-900

MS-800

SE-3000
SE-2000

24-24

SE-900

DVK-200

CKL-200
HDR-40
DN-200

HDR-50
DN-300

DN-60
DN-400 DN-500
NETWORK MEDIA
MP-1000
CG-100
CHARACTER GENERATORS

CG-300
36-37

CG-350
TFT LCD MONITORS
TLM-700 TLM-700HD/PD
TLM-702HD/PD TLM-433
38-39

SE-500
DIGITAL VIDEO RECORDERS
34-35

CHROMAKEY
33-33

SE-800
ITC-100
27-32

MS-500
INTERCOM SYSTEMS
25-26

SWITCHERS
12-23

HS-800

TLM-404H TLM-702
TLM-170/D/M/MD
CONVERTERS, DISTRIBUTORS
AMPLIFIERS, AUDIO DELAYS
DAC-7 DAC-8
VP-445 VP-299
40-41

DAC-9

TBC-1000

TBC-5000
ACCESSORIES
Copyright symbol 2009, 2010 Datavideo Corporation, all rights reserved. MediaPac is a trademark of Datavideo Corporation. Windows is a trademark
of Microsoft Corporation. Pentium is a trademark of Intel Corporation. Betacam is a trademark of Sony Corporation. All other trademarks are the property
of their respective owners. Connections, specifications, and appearance of products subject to change without notice.
HS-2000 five-input HD hand-carried mobile studio
The HS-2000 is a hand-carried, mobile
bile
studio that simplifies the workflow of
any HD-SDI production venue.
The HS-2000 combines 1 or 2 DVI-D sources and
d3
or 4 HD-SDI sources. Based on the SE-2000 switcher,
cher,
it also features a 17” LCD (LED Backlit) monitor to
o
display a multi-view output. The built-in 4 channell
audio mixer comes with a 5 channel wired intercom,
om,
complete with headsets, tally lights, and intercom belt
packs for 4 users. Operating the HS-2000 is easyy
and time-efficient because every control is right on
the work surface. Program output may be recorded
ed
on a digital video recorder, such as the Datavideo
o
HDR-40/50 (not included), then monitored on thee
LCD screen. Powerpoint presentations or Character
ter
generation software (like Datavideo’s CG-350) can
an
be added to your live production via your
computer through the DVI-D input.
17” LCD
( L ED B a c k lit
m o nit o r)
ITC-50
0
Int e rc o m
LCD M o nit o r
Co nt ro ls
S
SE-20
00
Sw it c h e r
With mobility in mind from start to finish, the
aluminum case is a good combination of light
weight and protective strength. The HS-2000
can go almost anywhere.
Features
Specifications
Designed to be “live-in-seconds” with easy setup,
breakdown and storage at any location
1920x1080i and 1280x720p
Built in digital clock and 2 logo stores
Lumakey function for text overlay
Picture-in-Picture function
Built in TBC and frame synchronizers on all video inputs for
glitch free switching
A multi view including each source, picture-in-picture preview,
preview and program. It also includes 28 pre-stored logos -14
per each logo, five operator setup memories, title overlay and
DVI-D input ideal for use with presentation software
Video
Inputs: 4x HD-SDI & 1x DVI-D or 3x HD-SDI & 2x DVI-D
Outputs: 2x HD-SDI & 1x HD-YUV
Processing: 10-bit internal processing
Audio
4x XLR microphones or line audio inputs with
48v phantom power
Monitor
17-inch LED video monitor displays each source,
picture-in-picture preview, preview, and program
Intercom
Built-in intercom system with 4 camera operator
belt packs and dual color, camera mounted tally lights
(5th ITC-100SL headset optional)
Power
DC 12V input with 110/222 supply included

Rear View
Au dio
Input
Int e rc o m b e lt
p a c k c o nn e c t o rs
H D -SD I
Input
H D -SD I
DVI-D
Input
DVI-D
Input
TA L LY
Output
Au dio
Output
H D -SD I
Output
HDMI Input for
monitoring
H D -YU V
Output
Power on/off
DC In 12V
3
HS-2000 five-input HD hand-carried mobile studio
APPLICATIONS
Example Setup Diagram
EXTERNAL MICROPHONES OR LINE LEVEL INPUTS
TLM-700
3 X HD-SDI SOURCES
1
HD-SDI
2
3
OR
HD-SDI TO YUV
YUV
CG-350
CHARACTER
GENERATOR
PC
HD-SDI or DVI
HDR-40/50
HD RECORDER
DVD RECORDER
MP-6000
DAC-8
DAC-50
AUDIO RCA
HD-SDI
HS-2000
INTERNET
WEB
CV
HDMI PLAYBACK MONITOR
XLR
4
HD-SDI
PC or
MAC
WEBCAST
ENCODER
7’ LCD MONITOR
HDMI
HD-SDI X 4
PROJECTOR
DVI
AUDIO
AUDIO DELAY
BOX
AD-100
Products shown sold separately
AUDIO
MIXER
DAC-8
HDMI
BUILT-IN
ITC-50
INTERCOM
PC or
MAC
CONNECTED as DSK
XLR
AUDIO
AUDIO
VP-445
LCD SCREEN
MONITOR
OPERATOR HEADSETS
Dimensions
CG-300 / 350 Software
Advanced window based character generator for SD & HD
productions. Software requires Decklink HD Extreme Card or
AJA Video Capture Card acting as a downstream keyer (DSK).
V
FKH P
,Q
P
P
P
,
PCR-350HD Workstation with Software / Decklink HD Extreme
This is an all inclusive workstation that comes with installed CG350 in an HP/Compaq 6000 Pro Micro tower PC. Includes:
19” wide screen LCD monitor and a Decklink HD extreme card.
QFK
HV
HDR 40 / 50
An HD/SD-SDI hard drive video recorder with HDMI output and
XLR inputs. The HDR 50 comes with the rackmount casing.
Width: 19.6 inches (498mm)
Depth: 18.1 inches (460mm)
Height: 5.4 inches (139mm)
Weight: 33.6lb (15.2kg)
Power:110-240V AC 60 Hz / 50 Hz 3A 36W Max
Included
4x MC-1
Headsets
4
What to Order
PP
,QFKHV
DAC-8
A converter that takes the HD/SD-SDI video and audio sources
and converts to HDMI.
VP-445
1x input, 4x output SDI distribution amplifier which works in either
SD-SDI or HD-SDI setting.
CA-SDI 50 / 100 / 150
A male to male BNC cable for 50 foot, 100 foot or 150 foot
correspondingly to the model numbers above.
4x ITC-100SL
Belt Packs
4x CB-3
65ft / 20m 5pin Cable
AD-100
Audio delay box that allows synchronization of video and audio.
Additional features also include traditional RCA connectors and
professional XLR connectors.
MS-900 eight-input SD mobile studio
The MS-900 is a portable, eight input SD
mobile studio that speeds the workflow of
any SD or travelling studio.
The shock mounted case of the MS-900 houses the
SE-900 switcher, which can accept a variety of input
boards for DV, SDI, DVI , YUV, as well as S-Video and
composite video. It can store up to two logos for output
display and also features a CG (Character Generator)
overlay channel. You can use a CG (like Datavideo’s
CG-100) as a DSK and retain access to the multiple
outputs of the SE-900 switcher. It also has a built-in 17”
monitor for multi-view output, which folds down into a
one rack-unit space for travel.
Some card options include external sync and a
chromakey card that allows cuts between two cameras
and two backgrounds. Additionally, it has an eight
channel wired intercom with belt-packs and tally lights.
Features

Virtual studio with up to eight live camera inputs. Requires
optional chromakey card
Control
Built in frame synchronizer and TBC for each channel, no external gen-lock is required for ﬂicker free switching
between all 8 inputs – in any format
Monitor

RS-232 or RS-422 control interface
Advanced multi-screen monitor to preview each source with
next source/effect preview and program output – with overlay
tally indicator

Designed to be “live-in-seconds” with easy setup, breakdown
and storage at any location
Recorder

Anti shock padding protects the MS-900 during transit

Each input card offers a composite Video Preview Output, irrespective of the input type
Intercom

Each DV and SDI video input has an audio de-embedder which
provides dual channel balanced audio output

Speciﬁcations
Video

Inputs: up to 8 inputs with a choice of SDI, DV, DVI, component
(Y:U:V), S-Video (Y/C) & composite

Outputs: Optional SDI, DV, YUV, S-Video and/or composite

Inputs: both balanced XLR and RCA with audio delay for
perfect sync with DV or SDI video sources

Outputs: one balanced XLR +/- 12Vp-p, 1 RCA stereo
Built-in DN-500 hard disk recorder for video recording
or playback
Keeping communication open between the camera crew, the
producer, lighting, ﬂoor manager, etc. is vital in any live production. ITC-100 is an 8 channel talkback/intercom system
that comes supplied complete with 8x camera man belt packs
with headset/microphone & tally box indicator
Power Distribution Center

Integrated Datavideo PD-1 power distribution center provides a
simple and secure solution for connecting power in the studio
or in the ﬁeld from a 12V source, such as a generator
5
MS-900 eight-input SD mobile studio
I /O C a r d s
Rear View
Easy installation of optional
I/O cards including SDI, DVI,
Down Stream Keyer, Genlock
and more.
RP-31
All inputs are synchronized
internally, so no genlock is
required, even between consumer
camcorders/players and
computer equipment.
PD-1
SE-900
Included Cards
External Control Card
SDI Overlay Card
RS-232, RS-422 & GPI control interface board
allows easy integration with existing equipment
that can be controlled such as tape recorders
and players or presentation control panels.
A down stream keyer (DSK) board that offers both
Internal and External keying options. Perfect for
integration with character generator hardware/
software such as Datavideo CG-100 or CG-350.
Multi-image preview output card
Analog & DV Output Card
The multi-image output display allows all inputs,
master & next source output to be displayed on
a single monitor, with super-imposed tally and
source info to assist the producer in a hectic live
production environment.
Output card for a range of popular video
formats – DV (with embedded audio from the audio
delay circuit), composite video, S-Video (Y/C) and
component (Y:U:V).
SDI Input Card
Analog Video Input Card
For users who work with SDI. Also includes audio
de-embedding to a balanced pair. Features
a useful composite monitor output for easy
connection to an external preview monitor
For users who require input from a range of popular
analog video formats including composite video,
S-Video (Y/C) and component (Y:U:V). Built-in TBC
syncs each input, enabling non-genlock gear to be used
without glitches. Features a useful composite Video
monitor output, for easy connection to an external
preview monitor.
DVI-D & VGA Input Card
DV Input Card
Connect a computer and switch between live video and
popular computer applications such as presentation
and more. Perfect for live events like worship and
company presentations. Features a composite monitor
output, for easy connection to an external preview
monitor.
For users who work with digital video (DV). The DV
input board also de-embeds the audio to a pair of
balanced outputs.
Four-Channel Chromakey
Function Card (Optional)
SDI Output Card
I/O Cards
Dimensions
For users who work with SDI. The SDI Output board
also features a useful composite Video monitor output, for
easy connection to an external preview monitor.
Create a virtual chromakey video studio with glitch-free
switching between up to four video inputs. You can
pair 4 fore-grounds (e. g. talent/actor in front of the
camera) and backgrounds (like 3D backgrounds). The
internal TBC takes care of synchronizing, even nongenlock equipment, like consumer camcorders can be
used.
P
PP
,QFKHV
Width: 24.4inches (620mm)
Height: 23.6inches (600mm)
Weight: 150lb (68kg)
PD1 Power Distribution Center:
AC 100-240VAC 50/60HZ or DC 12V 300W 25 Amps
6
FKHV
,Q
P
P
P
,QF
KHV
MS-900
MS-900
eight-channel
eight-input SD
SD mobile
mobile studio
studio
MS-900 MOBILE STUDIO SETUP
8 X INPUTS
SDI CAMERA
CG-100
MS-900
8 X INPUT
CARDS
MULT-IMAGE
PREVIEW
PC
DEVICE
PROGRAM
SDI
SDI IN
DV
PC or
MAC
SDI OUT
DV CAMCORDER
PROGRAM
PREVIEW
1
2
3
4
5
6
7
8
YUV
MONITOR
YUV
YUV
YUV
S-VIDEO
COMPOSITE
COMPUTER
MP-6000
DVI / VGA
OPTIONAL CARDS
DVD PLAYER
COMPUTER
AUDIO
OUT
AUDIO
IN
AUDIO
CV
CHROMAKEY
BOARD
TCP/IP
WEBCAST
ENCODER
WEB/NETWORK
OR
PC or
MAC
DV
EXTERNAL
GENLOCK
DEVICE
HDV RECORDER
DN-500
AUDIO MIXER
SDI
DAC-8
HDMI
7’ LCD
MONITOR
TLM-700
PROJECTOR
What to Order
OPERATOR HEADSETS
MS-900 MOBILE STUDIO - NTSC / PAL
MS-900 includes Datavideo's SE-900 switcher with a pull-out,
ﬂip-up monitor that displays all incoming sources, preview and
program outputs using the SE-900's multi-image output.
MP-6000
A DVD+R/RW recorder with DV input; allows recordings from
most A/V sources including: cameras and analog VCRs.
MS-900 DV
Includes 6x DV input cards, 2x YUV, CV, S, input cards,
and 8 input SD switcher with RS-232/422 interface; and
analog audio inputs on motherboard. In addition, keyboard,
multi image preview card, SDI CG overlay card; and CV,
YUV, S, DV video output cards, and 1 Chromakey card.
HD-40 / 50
A SD/HDI-SDI recorder with 250 GB removable HDD and two
hard drive enclosures included.
MS-900 STD
Includes 4x DV input cards, 4x YUV, CV, S, input cards, and
8 input SD switcher with RS-232/422 interface; and analog
audio inputs on motherboard. In addition, keyboard, multi
image preview card, SDI CG overlay card; and CV, YUV, S,
DV video output cards, and 1 Chromakey card.
MS-900 SDI
Includes 6x SDI input cards, 8 input SD switcher, RS-232/422
interface; and analog audio inputs on motherboard. In addition,
keyboard, multi image preview card, SDI CG overlay card; CV,
YUV, S, DV video output cards, and 1 Chromakey card
TB-5
A tally box that comes with 4 indicators compatible with both the
Datavideo SE-500 and SE-900.
MS-900 YUV
Includes 8x YUV, CV, S, input cards, 8 input SD switcher with RS232/422 interface; analog audio inputs on motherboard. Keyboard,
multi image preview card, SDI CG overlay card; and CV, YUV, S, DV
video output cards, and 1 Chromakey card are also included.
CA-SDI 50 / 100 / 150
correspondingly to the model number above.
MS-900 BROADCASTER
TLM-170M, 2x TB-5, NVS-10, DN-400 or DN-500, 1x Chromakey
Card. Pick from 6x YUV, CV, S Input Card and 6x DV Input Cards,
assembled in a 8U aluminum case.
DAC-8
CB-3 / CB-4 / CB-76
These are 5 pin intercom and tally cables that comes in the
following length: CB-3 is a 20M (65ft), CB-4 is a 50M (164ft), CB76 is a 76M(250ft).
CKL-200
Includes one Datavideo LD-1 blue/green LED ring, 1 brightness
control power supply, 3 camera adaptor rings in 82mm,
72mm, and 58mm; and 2 Datavideo RF-1225FP (Fire retardant
Chromakey fabric).
PCR-100SDI Workstation with Software / Decklink SDI
Workstation with software for CG-100SDI installed in a HP
Compaq 6000 Pro Micro tower PC ; includes a HP Compaq
19” widescreen LCD monitor and Decklink SDI card.
7
MS-800 four-input SD mobile studio
AV & DV Models
At the heart of the MS-800 is the
SE- 800 video/audio switcher.
DN-500
HDD player/recorder w/
removable hard drive
The SE-800 video/ audio switcher comes in
DV (digital) and AV (analog) versions. You can
choose which version you prefer. Each switcher
allows four channels of video and up to six
channels of audio to be switched. The MS-800
comes complete with a wired intercom system for
4 users. Also installed are monitors that display
each input source, a preview (the next video
coming up), and the program (the output).
ITC-100
Talkback/intercom system
TLM-702
2 x 7" TFT LCD
Monitor Bank
The built-in DN-500 hard drive recorder can be
used for playback or recording. The MS- 800 is a
one-box solution that goes anywhere and becomes
live in seconds. Operating the MS-800 is quick
and intuitive for beginners and professionals.
TLM-404H
4 x 4" TFT LCD Monitor
Bank
SE-800
DV/Analog Switcher
The MS-800 (Digital Version) also has a CG
(Character Generator) overlay channel, so you
may use a CG (like the CG-100) as a DSK, but
keep access to the multiple outputs of the switcher.
Features
Rear View

RP-1

RP-26
RP-6
An extensive rear panel accessory range ensures easy connection
to existing equipment on location or in the studio
Designed to be “live-in-seconds” with easy setup,
breakdown and storage at any location
Speciﬁcations
Video

RP-4

PD-1

DV version – inputs: 4 inputs in DV, composite, component, and S-Video
DV version – outputs: SDI, DV, composite, component, and S-Video
AV version – inputs: 4 inputs in composite, component, and S-Video
AV version – composite, component, and S-Video
Loop through of all camera sources, not just next source and
program output, for confident preview of all live sources.
Audio
Inputs: unbalanced, 4 sources (A, B, C, D),
Aux 1, Aux 2, stereo and 2 XLR inputs
Outputs: unbalanced, 2 main stereo outputs, 2 stereo XLR outputs
Control
RS-232 remote control interface
Monitor
TLM-404H for input monitoring and TLM-702 for
next source and program output monitoring
Recorder
Built-in DN-500 hard drive recorder is for playback
Intercom

Dimensions
8
8
8
HV
,QFK
P
P
8
8
8
PP
,QFKHV
PP
,QFKH
V
PP
V
,QFKH

PD-1 Power Distribution Center:
AC 100-240VAC 50/60HZ or DC 12V 300W
Weight: 159lb (72kg.)
8
producer, lighting, floor manager, etc. is vital in any
live production. ITC-100 is an eight-channel
talkback/intercom system that comes supplied complete with 4x
camera man belt packs with headset/microphone & tally box
indicator. Additional belt packs and extension cables available
simple and secure solution for connecting power in the
studio or in the field from a 12V source, such as a generator
HS-800 four-input SD mobile studio
The HS-800 houses the SE-800 video/
audio switcher in a compact mobile unit
with wheels. It also includes a wired
intercom system for up to 8 users and
monitors that display each input source.
TLM-702
2 x 7" TFT LCD
Monitor Bank
The built-in DN-500 hard drive recorder may be used
for playback or recording. The HS-800 is a one box
solution that goes anywhere, becomes live in seconds,
and can webcast using the optional NVS-10.
TLM-404H
4 x 4" TFT LCD
Monitor Bank
ITC-100
Talkback
Intercom system
The HS-800 (Digital Version) also has a CG (Character
Generator) overlay channel, so you may use a CG (like
the CG-100) as a DSK, but keep access to the multiple
outputs of the switcher. It is compact enough to fit in
the trunk of a car. The “flip up” monitor design, the
“mobile studio” is compact and fits in the trunk of a
car.
SE-800
DV/Analog Switcher
DN-500
HDD player/recorder
with removable
hard drive
USB
Connect the USB Hard
Drive to a PC or MAC
Removable USB Hard Drive
Features
Rear View

An extensive rear panel accessory range ensures easy connection
to existing equipment on location or in the studio
Designed to be “live-in-seconds” with easy setup, breakdown and
storage at any location
Anti shock padding protects the HS-800 during transit
Specifications
Video
Inputs: 4x DV, component, composite, and S-Video
Outputs: DV, component, composite and S-Video
Audio
Inputs: unbalanced, 4 sources (A, B, C, D), Aux 1, Aux 2,
stereo and microphone inputs
Outputs: unbalanced, 2 main stereo XLR outputs
PD-1 RP-4
SE-800
Control
ITC-100
Dimensions
8
HV P
P
,QFK
P
P
8
8
8
Monitor
TLM-404H for input monitoring and TLM-702 for next source
and main output monitoring
PP
,QFKHV
8
8
Depth: 30 inches (726 mm)
Height: 17 inches (432 mm)
PD1 Power Distribution Center:
AC 100-240VAC 50/60HZ or DC 12V 300W 25 Amps
,QFK
HV
Recorder
Built-in DN-500 hard drive recorder is for playback
Intercom
producer, lighting, floor manager, etc. is vital in any live production.
ITC-100 is an eight-channel talkback/intercom system that comes
supplied complete with 4x cameraman belt packs with headset/
microphone & tally box indicator. Additional belt packs and
extension cables available
simple and secure solution for connecting power in the studio or
in the field from a 12V source, such as a generator
9
MS-500 four-input SD mobile studio
The MS-500 is a straight forward
solution for transporting and
using a Datavideo SE-500
switcher and a dual screen TLM702 monitor as one unit.
DVD Player
For Illustration Only
Rack Shelf
The dual screen TLM-702 monitor is prewired to use one screen for selectable
quad-view of each source and the other
screen for program output. It’s perfect for
applications within education, houses of
worship, internet streaming, live events,
conferences and more. It also includes the
Datavideo PD-1 and ITC-100 Intercom,
for complete production versatility.
ITC-100
Talkback/Intercom
TLM-702
2 x 7" TFT LCD
Monitor Bank
Outputs include: component (YUV)
which could be connected to a
DVD recorder or projector.
SE-500
Features
Rear View

Anti shock padding protects the MS-500 during transit
Can be operated from DC as well as AC power
Specifications
Video
Inputs: 4x composite and S-Video
Outputs: 2x composite and 1x S-Video
RP-17
RP-18
PD-1
Audio
Inputs: 2x unbalanced RCA and ¼” mic
Outputs: 2x unbalanced RCA
Control
Monitor
TLM-702 utilizes the SE-500 unique quad preview output on
one of the high quality 7” TFT LCD monitors, while displaying
the program output on the second 7” TFT LCD monitor
Dimensions
8
HV
LQFK
P
P
PP
LQFKH
V
8
PP
V
LQFKH
8
8
PP
LQFKHV
PD-1 Power Distribution Center:
AC 100-240VAC 50/60HZ or DC 12V 300W
10
Intercom
Keeping communication open between the camera crew,
the producer, lighting, floor manager, etc. is vital in any live
production. ITC-100 is an eight-channel talkback/intercom
system that comes supplied complete with 4x camera man
belt packs with headset/microphone & tally box indicator.
Additional belt packs and extension cables available
simple and secure solution for connecting power in the studio
or in the field from a 12V source, such as a generator. PD-1
also provides two power outlets
HS-500 four-input SD hand-carried mobile studio
The HS-500 is a light weight hand-carried
solution for transporting and using a
Datavideo SE-500 switcher and a dual
screen TLM-702 monitor as one unit.
The dual screen TLM-702 monitor is pre-wired to use
one screen for selectable quad-view of each source
and the other screen for program output. It’s perfect for
applications within education, houses of worship, internet
streaming, live events, conferences and more.
CG (Character Generation) can be applied by using our
Datavideo CG-100 and a Blackmagic Design Decklink
® card that overlays text and graphics on the program
output (via a computer).
Outputs include: component (YUV) which could be
connected to a DVD recorder or projector.
Aluminum Carrying Case:
Rear View
Features

Easy adjustment of the viewing angle of the high quality TLM-702
TFT LCD monitor
Fully integrated with cable loom and power supply. Connection
to video sources (such as camcorders) is made easy with the
quick release pivoting back panel
Housed in a stylish and light aluminum carrying case for easy
and secure transport
Speciﬁcations
Video
Inputs: 4x composite and S-Video
Outputs: 2x composite and 1x S-Video OR 2x composite 1x
component
Audio

Dimensions
PP
KHV P
P
,QF
PP
,QFKHV
,QF
Control
KHV
Monitor
TLM-702 utilizes the SE-500 unique quad preview output on
one of the high quality 7” TFT LCD monitors, while displaying
the program output on the second 7” TFT LCD monitor
Power: 12V 4.2A DC 110/220 power supply included
11
SE-3000 16-input HD & SD video switcher
The SE-3000 is a versatile, easy-to-use 16 input HD/
SD live production switcher filled with an impressive
number of features and functions.
USB
Not only does it boast a touch screen menu to select EFX,
stills, and balance colors, it has dual multi-view outputs,
chromakey, dual PiP, 3D functions, multi language support
and a full size keyboard.
The processing unit is compact and conveniently designed
to accommodate mobile applications.
An interesting and powerful feature added to the SE3000 in the “Flex Source®” component, which is similar
to having a second M/E. (See the next page for a
connection schematic.)
RS-422 Out
Rear View
Audio Input
HD/ SD-SDI Input
DETAILS
Video Format
Video Processing
Video Input
Video Output
M/E
Flex source
Monitor
Keyer (in M/E)
Background
DSK
PiP
Still Store
AUX Bus
Input Functions
Output Functions
Ergonomic Touch Screen Control
Memory Function
Interface
Power Supply
Aux Out
Audio Output
HD Program
HD Preview
RS-422 In
RS-232
Tally
REF IN
Multi-1
REF Loop
Multi-2
GPI
DVI-D Input
Ethernet
DVD-D Output
HD/SD component Output
HD (1080/59.94i,60i,50i) - (720/59.94p, 60p, 50p) - SD (525/60NTSC,625/50 PAL)
4:2:2:4, 10 bit digital component
16x HD/SD-SDI inputs (included)
8x HD/SD-SDI outputs (included)
1x M/E with Flex Source®
Powerful Flex Source® feature allows 2x PiP images with background & linear keyer
Built in 7” 800x480 touch screen LCD
2x linear, luminance, chroma
Wipe – 40+ patterns, single/dual colored & video borders
DVE – 80+ transitions including slides, pushes, 3D spins, page turns & page rolls
2x DSK - linear & luminance
2x channel in Flex Source®
2x built in still stores, with internal storage for up to 100 uncompressed HD images
4x AUX outputs
16x inputs with 8x SD-to-HD up converter built in
Dual channel multiviewer, 20x sources split on two monitors, HD-SDI, DVI & HD component
Ergonomic LCD touch screen on the control panel with multi language support
Internal Storage for up to 999 user memories, 8x button shot box for instant access
Panel: RJ45, Editor: D-sub 9pin, Tally D-sub 37-pin, GPI D-sub 15-pin, PC: RJ45
12V DC operation 110/220 power supply and cord included
Specifications on the SE-3000 are subject to change without notice due to continual improvements.
12
DC In 12V
SE-3000 16-input HD & SD video switcher
REMOTE CONTROL
PC or
MAC
POWER
SUPPLY
AUDIO
OUTPUT X 2
DC IN
12V 10A
ETHERNET
HD-SDI OUT X4
8X HD/SD-SDI OUTPUTS
AUDIO
INPUTS X 4
AUX-1
AC INPUT
16X HD/SD-SDI INPUTS
HDMI
HD RECORDER
HDR-50
VIDEO PROJECTOR
WEB
AUX-2
WEBCAST
ENCODER
INTERNET
AUX-3
HD-SDI
HDMI
HD RECORDER
HDR-50
AUX-4
DEVICE
7’ LCD MONITOR
TLM-700HD
HD-SDI
DAC-8
MAIN PROCESSOR REAR PANEL
DVI-D
PC or
MAC
DVI INPUT
REF. IN (OPTION)
DAC-8
SINGLE MULTIVIEW OUT
RJ45
TYPICAL MULTI-IMAGE
PREVIEW
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
HD-SDI
OR
PROGRAM
1
2
3
5
6
7
4
8
9
10
11
12
13
14
15
16
PROGRAM
PREVIEW
AUX-1
AUX-2
PREVIEW
PREVIEW
DAC-8
AC INPUT
ITC-200
INTERCOM
BASE STATION
16X WIRED
BELT
PACK
3
4
7
8
PROGRAM
PROGRAM
DAC-8
DC IN
12V 3A
POWER
SUPPLY
2
6
OR
HD-SDI
HD/SD DIGITAL VIDEO SWITCHER
SE-3000 CONTROL PANEL
1
5
2
3
4
5
6
7
8
9
10
11
12
14
15
TALLY
INTERCOM
+TALLY
TB-30
TALLY BOX WORKS
WITH DATAVIDEO
TALLY LIGHTS
16 X OPERATOR HEADSETS
PROGRAM
PREVIEW
1
13
PREVIEW
AUX-1
AUX-2
1
2
3
4
9
10
11
12
5
6
7
8
13
14
15
16
16
Flex Source
1. Live or pre-recorded videos
2. PiP#1 with border
3. PiP#2 with border
4. Linear Key for CG, logo, etc...
2
1
3
Up Next: New Ideas for 2010
OR
4
This sample setup of four elements can be pre-configured
and assigned to an input just as if it was a single source.
This is similar to having 2 M/E on a single switcher!
What to Order
HDR-40 / 50
Hard drive video recorder comes equipped with a 250GB
removable hard disk drive and enclosure. HDR-50 comes with
an additional rack mount.
TLM-700HD
This is a one unit; 7” TFT HD LCD monitors that comes with an
on screen display features and HD-SDI inputs.
ITC-200 (Coming Soon)
An intercom that accommodates up to 16 remote users. This set
includes: case station, 20M (65ft) cables, headsets, belt packs
and tally lights for 8 users.
CA-SDI 50/100/150
correspondingly to the model number.
CG-350 - Software Only
This is a Windows based character generator for SD & HD
productions. Software requires Decklink HD Extreme Card or
DAC-8
Workstation with software for SD or HD CG-350 in a 3 RU
rackmount computer with Decklink Extreme that can be used
HD-SDI or SD-SDI.
CA-SDI 50 /100 /150
TB-30 (Coming Soon)
A tally box thats compatible with the
Datavideo SE-3000 switcher.
PD-2 (Coming Soon)
A dual DC12V power supply with two AC inputs and UPS
function. If one power supply fails, the other takes over.
13
SE-2000 five-input HD video switcher
The SE-2000 is a HD-SDI switcher ideal for small
live production venues that use up to 5 inputs.
Multi-Image PVW out and clock display
By combining 1 or 2 DVI-D sources and 3 or 4 HD-SDI sources,
any user can make the most of this flexible unit.
Preview
Program
Clock
The HD-SDI inputs may be HD cameras or small HDMI output
cameras that can be used with a Datavideo DAC-9 HDMI to HDSDI converter (not included). With Datavideo’s CG-350 software,
CG (character generation) may be added to any live production
via computer, through the DVI-D input. PowerPoint® presentations
Cam4
(DVI/HD-SDI)
can also be used via the computer as a source or overlaid using
the luminance key.
The SE-2000’s multi-display output includes each source, preview
display, program display, PiP, and a digital clock display. In
addition, the system will store and recall 14 different logos. It has 5
memory settings (user-defined) and title overlay.
CAM3
(HD-SDI)
Cam2
(HD-SDI)
PIP
Cam 5
(DVI)
Cam1
(HD-SDI)
The SE-2000's built-in audio mixer has four audio-followsvideo inputs (microphone or line), and two audio outputs.
Operating the SE-2000 is easy and time-efficient because
every control is right on the work surface.
RKM-2000
Monitor &
Intercom
Holder
Features
Logo insertion - 28 pre-stored logos -14 per each logo
(max 128 x 96 pixels) inserted via luminance key
Luminance key, PIP, Freeze Image, Black
Five individual speed keys, T-bar and TAKE key
Five user preset memories
13 transitions with adjustable border width
Multi preview monitor output (DVI Out)

ITC-100
Intercom
SE-2000
Switcher
Resolution

Input 1920x1080i & 1280x720p
Output 1080i - 720p
Speciﬁcations
Optional Accessories
Video
ITC-100
(4 users)
RKM-2000
ITC-100 Intercom System
SE-2000 Monitor/Intercom Holder

Inputs: 4x HD-SDI & 1x DVI-D or 3x HD-SDI & 2x DVI-D
Outputs: 2x HD-SDI, 1x HD-YUV & DVI (Multi-view)
Processing: 10-bit internal processing
Audio

4x XLR microphone or line audio inputs
Power

DC 12V input with 110/220 supply included
Rear View
HD-SDI Input
14
Audio Input
HD-SDI In/
DVI-D In
input
DVI-D Input
Audio Output
Tally
HD-SDI Output
Power Switch
Preview Output
HD-YUV Output
DC In 12V
SE-2000 five-input HD video switcher
PROGRAM
DVI OUT
2
3
4
HD-SDI
XLR
1
HD-SDI
PC or
MAC
2
3
5
6
CG-350
CHARACTER
GENERATOR
HD-SDI or DVI
PC
YUV
INTERCOM +TALLY
HD-SDI X 4
AUDIO
AUDIO DELAY
BOX
AD-100
AUDIO MIXER
OPERATOR HEADSETS
What to Order
XLR
AUDIO
CONNECTED AS DSK
DVI-D
HDMI
VIDEO
PROJECTOR
VP-445
AUDIO
PC or
MAC
HDR-40/50
DVD RECORDER
MP-6000
SE-2000 CONTROL PANEL
ITC-100
HD RECORDERS
CV
HD-SDI TO YUV
DAC-50
INTERNET
WEB
DAC-8
HD-SDI
TLM-700
PREVIEW
1
4
WEBCAST
ENCODER
7’ LCD MONITOR
DAC-8
HDMI
EXTERNAL MICROPHONES
AUDIO RCA
3 X HD-SDI SOURCES
MULTI-IMAGE
PREVIEW
LCD SCREEN
MONITOR
SE-2000 KIT ITC
The kit includes the SE-2000, 8-channel ITC-100 intercom with 5
operator headsets, and RKM-2000 holder.
AD-100
Audio delay box that allows better synchronization of video and
audio output. This unit permits traditional RCA connectors but also
accommodates professional XLR connectors.
SE-2000 KIT HDR
The kit includes the SE-2000, HDR-50 SD/HD-SDI Hard Drive
Video Recorder and RKM-2000 holder.
TLM-700HD
This is a one unit; 7” TFT HD LCD monitors that comes with on
screen display features and HD-SDI inputs.
RKM-2000
Holder for SE-2000, ITC-100, and space for monitor (monitor not
included).
TLM-170
A 17” monitor that comes with a 1440 x 900 high resolution, 16:9
aspect ratio, and built-in speakers with SDI inputs.
ITC-100
DAC-8
CG-350 - Software Only
This is a Microsoft Window based character generator for SD
& HD productions. Software requires Decklink HD Extreme
Card or AJA Video Capture Card acting as a downstream
keyer (DSK).
DAC-9
A converter that takes the HDMI source and converts it to HD/SDSDI video and audio sources.
Workstation with software for SD or HD CG-350 in a 3 RU
rackmount computer with Decklink Extreme that can be used
HD-SDI or SD-SDI.
VP-445
A HD/SD-SDI distribution amplifier that comes with mounting
brackets.
CB-10
This is a YUV cable with sync of 4 BNC to 4 BNC (component
to genlock) of 9.8 ft or 3 meter cable.
CA-SDI 50 / 100 / 150
Dimensions
Power: 12V 5A DC 110/220 power supply included
15
SE-900 eight-input SD video switcher
Multi-image Preview Output
The SE-900 is a two-piece eight input
SD switcher designed for flexibility and
ease-of-use.
The SE-900 accepts any combination of up to eight
input boards for DV, SDI, DVI, YUV, S-Video and
composite video. It can also store 2 logos for output
display, and has a CG(Character Generation) overlay
channel. A user can apply CG software (like the
Datavideo CG-100) as a DSK and still retain access to
the multiple outputs of the SE-900 switcher.
The rack mounted processing unit of the SE-900 is
connected to the control panel by an RS-232 cable.
Datavideo has prepared several SE-900 “kits” with
various input cards included, but you may choose
any configuration that you prefer for the eight slots
available.
Card options include external synch and a chromakey
card that allows cuts between two cameras and two
backgrounds.
Features
Built in frame synchronizer and TBC for each channel, no
external gen-lock is required for flicker free switching
between all 8 inputs – in any format
Voice sync - audio delayed to minus 17 frames
Picture-in-Picture (two fixed sizes, able to move from
off-screen to off-screen)
Joystick control can work with either RGB color correction
(white balance), position control for the PIP or Mosaic effect
Multi-image preview panel allows the producer to monitor all
live sources as well as Program & Next source
SDI overlay card pre-installed – use with any SDI-based
character generator with a downstream keyer
(DSK) (Upgrade card)
Easy titling with an optional CG-100 Character Generator
Digital effects – Over 50 digital effects (including 15
transitions with borders) with six speeds, plus 6 special
effects
Logo overlay included – use 24-bit RGB 96x24 bitmap image
or input source
Eight tally outputs, red/yellow LED tally lights included
Audio may be embedded in the SDI stream
GPI input trigger controls up to 10 pre-programmed
effects in sequence
Optional chromakey card - can accept four
foreground inputs, four background inputs and four
chromakey settings. Internal chromakey switcher allows for
glitch-free switching between the four sources and
backgrounds. Background and foreground selection is through
the inputs to the switcher
Separate control panel and 19” rack-mountable main unit

16
Each input card offers a composite video preview output,
irrespective of the input type
Includes an audio delay function as well as a DV/SDI audio
embedder for output. Additionally, each DV and SDI video
input has an audio de-embedder which provides dual channel
balanced audio output

Speciﬁcations
Video
Inputs: up to 8 inputs with a choice of SDI, DV, DVI,
component (Y:U:V), S-Video (Y/C) & composite
Outputs: SDI, DV, YUV, S-Video and/or composite Video.
(2) multi-image preview outputs. (1) Normal is the next source
preview. Pressing the “Preview” key shows the next effect. (2)
Multi-image output - composite and component video.
Audio
Inputs: stereo balanced XLR’s and RCA with audio delay for
perfect sync with DV or SDI video sources
Outputs: stereo balanced XLR +/- 12Vp-p, 1 RCA stereo
Control
GPI and RS-232/RS-422 control interface
Power
Main unit: 12V 10A power supply included
Control panel: 12V 1.2A DC operation 110/220
powersupply and cord included

Rear View
Audio Output Balanced &
RCA
Audio Input Balanced &
RCA
Control Panel Connector
Monitor Out
Power Connector
Tally
RS-232 &
SDI Output
Preview Card
RC-422
Analog Input Cards
Card
Card Analog & DV
Chroma Key Card
SDI CG OverDVI/VGA Input Card
Video Output
lay Card
Card
DV Input Card
SDI Input Cards
I/O Cards
RS-232/RS-422/GPI
DV-IN (900-DV25)
SDI CG OVERLAY
CV/S/YUV/DV OUT
CV/S/YUV IN (900-YUV)
SDI-IN (900-SDI)
PREVIEW
DVI-VGA-IN
(900-DVI)
SDI-OUT (900-SDI-O)
CHROMAKEY
(900-DVK)
Optional Converters
D I G I T AL V I D E O S W I T C H E R
AUDIO
C V ,S-VIDE O
or Y UV IN PUT
SDI OU T
DAC-7
(WITH EMBEDDED
AU D I O )
S E-900
YUV to SDI Converter
17
SDI CAMERA
CG-100
SE-900
8 X INPUT
CUSTOMIZABLE
CARDS
MULT-IMAGE
PREVIEW
PC
PROGRAM
SDI
DV CAMCORDER
SDI IN
DV
PC or
MAC
COMPUTER
MP-6000
DVI / VGA
AUDIO
OUT
AUDIO
IN
AUDIO MIXER
OR
DVD PLAYER
EXTERNAL
GENLOCK
DEVICE
1
2
3
4
5
6
7
8
YUV
MONITOR
YUV
YUV
AUDIO
CV
CHROMAKEY
BOARD
PC or
MAC
PROGRAM
PREVIEW
YUV
S-VIDEO
COMPOSITE
OPTION CARDS
COMPUTER
SDI OUT
DEVICE
ITC-100 INTERCOM
TCP/IP
WEBCAST
ENCODER
WEB/NETWORK
DV
HDV RECORDER
DN-500
SDI
DAC-8
HDMI
7” LCD
MONITOR
TLM-700
PROJECTOR
What to Order
OPERATOR HEADSETS
18
8
SE-900 DV KIT
6x DV Input Cards, 2x YUV, CV,S Input Card +8 Input
SD Switcher & Analog Audio inputs on Motherboard .
Keyboard, Multi Image Preview card, SDI CG Overlay card
& CV,YUV,S, DV Video Out card.1x Chromakey Card.
DAC-7 / 7L
A converter that swaps analog to SDI. DAC-7L is an individual
unit without the tri-pod mount.
SE-900 STD KIT
4x DV Input Cards, 4x YUV, CV,S Input Card+8 Input SD
Switcher & Analog Audio inputs on Motherboard. Keyboard,
Multi Image Preview card, SDI CG Overlay card & CV,YUV,S,
DV Video Out card.1x Chromakey Card.
TB-5
SE-900 SDI KIT
6x SDI in Cards,+8 Input SD Switcher & Analog Audio inputs
on Motherboard . Keyboard, Multi Image Preview card,
SDI CG Overlay card & CV,YUV,S, DV Video Out card.1x
Chromakey Card, 1x SDI out Card
HDR-40 /50
Hard drive video recorder comes equipped with a 250GB
removable hard disk drive and enclosure. The HDR-50 is a
rack mount unit.
SE-900 YUV KIT
8x YUV, CV, S Input Cards, +8 Input SD Switcher & interface
& Analog Audio inputs on Motherboard . Keyboard, Multi
Image Preview card, SDI CG Overlay card & CV,YUV,S, DV
Video Out card.1x Chromakey Card.
TLM-404H
4 units of 4” TFT LCD composite monitor on a 19” rack mount;
that is made from steel and aluminum.
SE-900 BROADCASTER
TLM-170M, 2x TB-5, NVS-10, DN-400 or DN-500, 1x
Chromakey Card. Pick from 6x YUV, CV, S Input Card and 6x
DV Input Cards.
TLM-170
A 17” monitor that comes with a 1440x900 high resolution, 16:9
aspect ratio, and built-in speakers with SDI inputs.
ITC-100KF900
VP-314
This is an inline DV repeater that comes with 6-pin outputs.
DN-400 / DN-500
This is a DV/HDV hard drive disk recorder that comes with
a removable 250GB hard drive disk and two hard drive
enclosures. The DN-500 is a rack mount unit.
CA-SDI 50 / 100 / 150
SE-800 four-input SD video switcher
The SE-800 AV & DV video switchers are ﬂexible
solutions for any studio and are supported by a large
family of Datavideo accessories.
The SE-800 comes in digital and analog versions (SE-800DV and SE800AV), accommodating almost any studio set-up. The DV model includes
4 DV/AV inputs and outputs for SDI, DV, composite, component, and
S-Video. It also includes an output for an SDI overlay channel for use with
a CG (character generator) that uses a down stream keyer (DSK). Using
the SDI overlay allows the character generator to appear in all of the SE800DV outputs. The SE-800 switchers also include an internal audio mixer
with both mic and line level audio inputs. (Built-in audio delay will ensure
correct lip-synch works on all formats) Both models include TBC and a
format converter, so each input source may be seen with a composite
video monitor.
Each unit is compatible with a family of Datavideo accessories: monitor
holders, shipping cases, mobile studios (and their compatible products)
intercoms, character generators, and more. We have several SE-800 “kits”
available that include a switcher and monitor, but you can build a kit of
your own with the available accessories.
Features

SDI graphics overlay – use any SDI based character
generator with DSK (down stream keyer). SE-800DV has SDI
overlay built in, SE-800AV requires upgrade card
No gen-lock required – frame synchronizer and TBC built-in
for each active source for ﬂicker-free switching

Four tally outputs – requires RMC-140 with
red/yellow tally lights

Input selector – main and sub bus selector. Cut direct
between sources via the main bus

GPI input trigger controls 30 pre-programmed effects in sequence

Preset keys – 30 quick selection keys for preset event
and effects

Voice sync – audio advanced to audio delayed, +3/-19 frame

Audio mixer – 6 channel stereo mixer for mixing the audio
from video with house audio or AUX inputs or microphone

Adjustable audio delay for frame accurate and perfect
synchronization between video and external audio
Video
DV version – inputs: 4 inputs in DV, composite,
component and S-Video
DV version – outputs: SDI, DV, composite,
component, and S-Video. SDI overlay for graphics
or character generators

Joystick control can be used for either RGB color correction
(white balance corrections) or position the PIP or Mosaic effect

Picture-In-Picture (two ﬁxed sizes)

Color processor – brightness, contrast, and color setting white
balanced for each input. Last settings saved at power up

Digital effects – 15 transitions plus border, six speeds, plus six
special effects

Easy tilt with the Datavideo CG-100 character generator

Monitor output: one composite output for each input via
included composite video format converters

Next source preview and tally – optional with RMC-140

Included
Speciﬁcations
AV version – inputs: 4 inputs in composite, component,
and S-Video
AV version – outputs: composite, component, and S-Video
Audio
Inputs: unbalanced, 4 sources (A, B, C, D), aux 1, aux 2,
stereo
Outputs: unbalanced, 2 main stereo outputs
Control
Power
15V 4.5A DC 110/220 power supply

Quad 4” TFT LCD Monitor
Aluminum Accessory
Case
LCD Monitor Holder
TLM-404H
Dual 7” TFT LCD Monitor
TLM-702
RKM-4N7
19
SE-800DV Rear Panel View
GPI Interface
Control via GPI interface 30 pre-programmed effects
Monitor Outputs A-D
Video Inputs A-D
Video Outputs
RS-232 Interface
Each input is looped
through to a composite
video monitor
Four video inputs, each
with DV25, component YUV,
S-Video
(Y/C) and composite video
Simultaneous output of SDI,
component Y:U:V, DV25, S-Video
(Y/C) & composite video
Connect Datavideo’s external control
boxes (RMC-90,
RMC140 & RMC-120)
Dimensions
DV Input
Power: 15V 4.5A DC 110/220
power supply included
SE-800DV provides users
with four DV25 inputs via a
FireWire connector. DV25
provides optimal picture
quality while at the same time
easy installation and no quality
loss using long cabling
GPI Interface
SE-800AV Rear Panel View
Monitor Output A-D
Each input is looped
through to a composite video
monitor
Control via GPI interface 30 preprogrammed effects
Video Input A-D
Four video inputs, component
YUV, S-Video (Y/C) and
composite video
Video Output
Simultaneous output of SDI,
component Y:U:V, DV25, S-Video
(Y/C) & composite Video
RMC-120 Ethernet remote controller
System Requirements
CPU: Pentium 4, 2.4GHz
RAM: 512MB RAM
Screen Resolution: 1024x768
OS: Windows XP
PC/Network control box allows full
control of SE-800 via Datavideo's
free software (available online on our
website)
20
RS-232 Interface
Connect Datavideo’s external control
boxes (RMC-90, RMC140 & RMC-120)
SE-800
SE
800 Remote
Re
Remot
motee control
mot
cont
c ont
ontrol
rol software
softw
so
ftware
ftw
are (PC
(P
( C Only)
O nlyy )
Only
Remote Control Software
Ĳ
ĳ
Ĵ
ĵ
Connect the SE-800 direct to a RMC-120 port or a Ethernet port on a computer
and control the switcher using special computer software
RMC-120 Ethernet Control Box
Ķ
HUB
ķ
ĸ
Ĺ
ĺ
Ĳı
ĲĲ
ĳĴ
ĳĳ
RS-232 cable
Ethernet cable to computer
TCP/IP
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Joy stick and mode selector
Voice sync adjustment
Video input format selector
Color processor
Border control
Background control
Audio follow video switch
Transition source selectors
GPI function on/off button
Audio channel selectors
Play F1 to F30 by sequence
Take function key
ĳĲ
T-Bar
Main video source selectors
Sub video source selectors
Chroma key control
Preset Banks F1 to F30
Video effects: Picture in Picture
Video effects: Paint controls
Video effects: Mosaic controls
Numeric Keypad
Transition effects.
Audio channel selectors
PIP
ĲĶ
Ĳĵ ĲĴ
Ĳĳ
RMC-140
A tally box that works with the SE-800 to display choices of next
source.
RMC-120
This is an Ethernet (TCP/IP) based control box used in particular
with the SE-800.
Next Source/Tally Box RMC-140
POP
Ĳĸ Ĳķ
DN-400 / DN-500
This is a DV/HDV hard drive recorder that comes with a
removable 250GB hard drive disk and two hard drive enclosures.
DN-500 comes with an additional rack mount.
Quad
ĳı Ĳĺ ĲĹ
NEXT
VP-314
This is an inline DV repeater that comes with 6-pin outputs.
What to Order
Menu
selector
Tally light output
(15pin & 3.5mm
RS-232
control output
4 x composite
Video input
RS-232
control input
Monitor output
(Quad,POP,PIP,and
Next)
ITC-100
MP-6000
DVD +R/RW recorder with DV inputs which allows recording
of media directly from most A/V sources, cameras, and analog
VCRs’.
RKM-4N7PK
This is a holder for the SE-800; also includes space to hold TLM404H, TLM702 and ITC-100.
TLM-404H
4 units of 4” TFT LCD composite monitor on a 19” rack mount;
that is made from steel and aluminum.
TLM-702
This is a 2 unit; 7” TFT LCD monitors that comes with on screen
display features and HD-SDI inputs.
Power (DC12V)
4 Full screen preview
with tally indication
Designed specifically for the SE-800
DV CABLES - CA2066/CA1066/CA2266
CA 2066/CA1066/These are male to male fire wire cables:
CA2066 is a 20 meter (65ft) cable, CA 1066 is a 10 meter (32ft),
CA 2266 is a 1.8 meter (5.9ft).
21
The SE-500 is a compact, light weight, 4-channel
analog video/audio switcher with a built-in Time
Base Correction.
TLM-702 / 2 x 7” TFT LCD
Optional Monitor Bank
The SE-500 accepts S-Video (Y/C) and composite video signals,
making it ideal for small churches, schools, clubs, or pubs –
anywhere that you want a low cost, extremely reliable video /
audio switcher. In addition to S-Video and composite Video, the
SE-500 also provides component (Y:U:V) output. Features include
dissolves, flicker free cuts, wipes, splits, PiP and a color processor.
It also has built-in TBC for each channel for seamless switching.
The SE-500 has a selectable quad-view output of the four inputs.
You only need two video monitors — one for the source and one
for program output.
Monitor output: preview may be displayed as PIP or Quad
preview
With the included breakout cable, one composite output and
one S-Video output can be combined and converted into a
component output
Built in audio mixer with two microphone channels, one
auxiliary video source output
Digital processor - high image quality
Digital effects - split, PIP, wipe, fade and quad display effect
Illuminated backlit control buttons
5-pin MIDI control interface
Headphone monitor with volume control
NTSC or PAL video standards (not a dual standard device)

Speciﬁcations
Video
Inputs: 4x composite, 4x S-Video
Outputs: 3x composite and 1x S -Video or 2x composite
1x component
The SE-500 can be manually operated or controlled via RS-232 &
MIDI interface.
SE-500
SE-500 model is a 4 input analog video and audio switcher that
comes with a quad preview.
RMC-150
This is an Ethernet (TCP/IP) based control box used in particular
with the SE-500.
What to Order
Features
Audio

TB-5
TLM-702
This is a 2 unit; 7” TFT LCD unit that comes with on screen display
features and HD-SDI inputs.
RKM-572
This is a holder for the SE-500; also includes space to hold
TLM-702.
Control
RS-232 control interface

Power
12V 1.5A DC 110/220 power supply included

Rear View
CV Input
Y:U:V Output
CV Output
RMC-150 Control
AUX In/Out
Microphone Input
NO
GENLOCK
REQUIRED
MIDI Control
S-Video (Y/C) Input
22
S-Video (Y/C)
Quad Preview
Tally output
DC In
On/Off
Ethernet Remote Controller
System Requirements
The RMC-150 is a PC/Network
control box. Allows full control of
SE-500 using our free software
(Available on-line)

CPU: Pentium 4 © , 2.4GHz
RAM: 512MB RAM
Screen Resolution: 1024x768

OS: Windows XP or higher ©

Connection Diagram
Remote control software
COMPUTER
Connect the SE-500 directly to
a RS-232 port on an computer
and control the switcher using
special computer software.
HUB
RS-232
TCP/IP
RS-232 CABLE
ETHERNET CABLE
TB-5 Tally Box & Indicators
Power
15-Pin Tally
or
connector
Tall Out
Tally
TB-5 Tally Box & Indicators
TB-5 Tally Box
&%
7'
&$0
7%
7'
7
7'
&$0
7$//<
$9
7$//<
$9
7
7'
7'
7DOO\,QGLFDWRU
&$0
&$0
$9
$9
6(
Dimensions
Height: 3.3inches (84mm)
Weight: 5lb (2.3kg)
23
ITC-100
Eight-channel Intercom System
4x MC-1
4x ITC-100SL
The ITC-100 is a practical base station
intercom system for up to eight remoteusers, and comes complete with tally
lights, belt-packs, cables and headsets for
4 users.
4x TD-1
Users are connected to the base station via belt
packs and 20 meter 5-pin XLR audio cables that may
be extended up to 200 meters.
Included Accessories
The ITC-100 is available as a standalone product or as a kit for specific switchers:

ITC-100: Use with the SE-500 or SE-800, includes 4 belt packs with tally lights, headsets and 20m cables

ITC-100KF900: Use with the SE-900; includes 8 belt-packs with tally lights, headsets, and 20m cables
Features

1 RU high chassis
Supplied with gooseneck microphone and LED light
External headset and microphone interface
Enables clean and vital communication between
the camera crew and the director
Communication distance up to 200 meters
Each operator package includes:
Beltpack
20m communications cable with 5pin XLR cables
Headset
Tally light (Red/Yellow, camera mounted)
What to Order

Specifications
ITC-100
CB-3 / CB-4 / CB-76
These are 5 pin intercom and tally cables that comes in the
following length: CB-3 is a 20M (65ft), CB-4 is a 50M (164ft),
CB-76 is a 76M(250ft).
Power
Intercom Beltpack ITC-100SL
Call Button
Tally
Headset
with
microphone
Talk Button
Dimensions
Weight: 5lb (2.3kg)
Headset
TD-1
Intercom / Tally Output 1-8
24
Tally B
DC in 12V
Input
2.5A
DVK-200 SD Chromakey
The DVK-200 is a Standard Definition, standalone chromakey solution designed for education,
small studios, wedding videographers and smaller
production companies.
The DVK-200 can help create live virtual studio effects using one
camera and the DVI output of your computer. You can play clips,
create still backgrounds, or embed people into a PowerPoint®
presentation that you webcast. The DVK-200 has switchable DVI,
S-Video and composite video foreground and background inputs.
The YUV input is reserved for foreground use only. It supports either
PAL or NTSC video standards.
Features
Key out backgrounds - select blue, green or luminance
Key out level adjustment - reduce the shadow after keying
Crop/adjust window - select areas of screen window to be keyed
Built in shrink function - reduces white or black edges
on a subject
Built in TBC (Time Base Corrector)
Adjustable color processor, brightness, contrast, color and
tint (tint is only NTSC)
Spill adjustment – removes unwanted color cast
on the subject
Subject density – makes the subject become
more or less defined
Perfect accessory - the CKL-200 dual color light ring and
retro reflective cloth (not included)

Preview Output
Foreground
Background
Results
Speciﬁcations
DVK-200 Video
Foreground Inputs: DVI, YUV, S-Video, and CV (composite)
Background Inputs: DVI, S-Video, and CV (composite)
(Single DVI can be used as a foreground or
background source)
Outputs: 2x CV (composite) and S-Video
Control

Power
Rear View
DVI In
Input Select Mode Select
GPI RS-232 Control
MONITOR PREVIEW
TLM-170
BACKGROUND
DVD PLAYER
DVI, CV or S(Y/C)
CV
FOREGROUND
YUV or
S(Y/C)
CHROMAKEY
DVK-200
S(Y/C)
DN-400
PC or
MAC
DVI or CV
Foreground
Green Key
Background Output
DC in 12V 1.5A
Blue Key
25
CKL-200 SD Chromakey Studio Kit
LD-1+RF-1225FP
Single Dual Color (Green & Blue) LED ring
Highly retro-reflective material
Switch between Blue or Green
screen with a push of a switch!
The CKL-200 is a combination of a dual-color
(green & blue) LED ring, and a unique retroreflective backdrop cloth.
Change chromakey setup from
Green to Blue with a flick of
a switch on the supplied LD-1
controller
Features

CKL-200 kit include

LD-1 Dual green/blue LED light ring with control unit for
switching colors and controlling LED brightness
82mm, 72mm (pre-installed in light ring) and 58mm
adapter rings
Power supply
Speciﬁcations

Input: two camcorder inputs for foreground and one
background input. S-Video and composite video input
Output: S-Video and composite output
Power supply comes with built-in dimmer control switch,
GPI In/Out interface and External blue / green button
LED lights effective range – 10 meters
Dual Color LED – Green & Blue
LED light ring lens size 72 mm (additional stepping rings from
52mm to 82mm available from your reseller)
Two retro-reflective cloths (2.5m x 1.2m each)
Perfect light return up to 75° off axis
DC power AC100~240V
AC or DC 12V 1.5A
Recommended for Standard Definition remote control
26
What to Order
The LED light ring is mounted on the lens of your camera,
and projects a highly directional green or blue light on the
backdrop cloth. The backdrop cloth is embedded with glass
beads. Light is then projected back to the camera creating
a perfect green or blue background, providing you with an
excellent SD keying result with very little effort.
RF-1225FP
4.1’ x 4.1’ (1.25m x 3m) retro-reflective screen for use with the
CKL-200, fire-retardant.
CKL-200
LD-1 LED ring, power supply, camera adaptor rings(82mm,
72mm, and 58mm) plus 2 X RF-1225FP (Fire-retardant) : 4.1’
x 9.8’ (1.25m x 2.5m) retro-reflective screens.
Retro-Reflective Screen
2.4m(Expandable)
2.5m
RF-1225FP
Expandable
Thanks to the retroreflective material
with embedded glass
beads, light from LED
light ring is projected
back to the camera (up
to 75 degrees axis).
It's expandable in many
ways with the use of its
velcro edges or with
its grommet and pole
sleeves, connections.
*HWWLQJ*UHDW&KURPDNH\5HVXOWV
Achieving great results by utilizing chromakey technology
How does it work?
Chromakey technology works by recognizing a single video color
and replacing it with a background image.
Background resources:
Paper
Paper is the easiest, fastest, and least expensive solution in creating
Natural lighting for the people
a chromakey background.
We are used to seeing each
Paint
other with a main or key source
Paint is an easy and permanent solution to create a chromakey
and a fill source. Flat lighting
background; however, home supply paint is not recommended.
on the people will appear less
Cloth
natural. You should be able to
Regular cloth and foam backed cloth also works to create a
light the people without affecting
chromakey background. The only difference between a regular
the background.
cloth versus a foam backed cloth is foam backed cloth comes in a
wrinkle-free condition.
Balance the light levels
You will get better results if the light on the background and the
Cyclorama
light on the subject are of similar brightness levels.
This can be used toward creating a curved background between
the walls and the floor. This is a permanent solution.
Light brightness
Retroreflective Backgrounds
Light brightness is like sound. The closer you are to the
This material reflects light back toward the source where it came
source, the more there is. Light spreads out rapidly with distance.
from; utilizing the same theory as traffic signs. Having the LED
With more light, the camera electronics will work less (theoretically)
rings surrounding the camera lens, you can use a small amount
the signal has less noise. Less expensive cameras can look better
of light to illuminate just what the camera sees. It will help if you
with more light. More light also means that the lens is stopped
“backlight” the subject to make it easier for the chromakey to
down more and that the depth of field is greater i.e.– more is in
distinguish between backgrounds and foregrounds.
Choosing Wide Angle Lenses?
A wide angle lens is required
for accommodating a larger
background, because camera
lens focal length will affect the
size of the background.
Getting the right results:
Lighting
Lighting: In order to obtain optimum results; a well-balanced
background and subject lighting is required.
How do you measure lighting?
Use a light meter: a light meter will obtain illumination on the
background. Do not use your eyes to judge the evenness of the
illumination.
Flat lighting for the backgrounds.
Chromakey works best with even
lighting or also known as, flat
lighting. Flat lighting will provide
difficulties in illuminating an evenly
distributed background; therefore,
you will need the Datavideo
Chromakey technology DVK100 providing you the capability
of cropping the unnecessary
Light Glossary:
Candela (cd)- is used in reference of 1 unit of luminous intensity of
a light source in a specific direction.
Footcandle (fc or ftc)- is used in reference of a unit of light intensity,
measured in lumens per square foot.
Lumen (lm)- is used in reference of 1 unit of light flow or luminous
flux.
Lux (lx)- is used in reference of 1 unit of Lux illumination equals
to one lumen per square meter.
To make easier sense, if you work in feet, you results will be
measured in footcandles.
(1 footcandle = 1 lumen/sq ft). If you work in meter, your results
will be in lux (1 lux = 1 lumen sq meter)
These are the questions to keep in mind when experimenting
screen setups with the illumination ratios:
1. If the green/blue screen is brighter than the subject, what will
the edge look like?
2. If they the subjects inside the screen are about equal, what
will the edge look like?
3. How does lighting the back of the subject have an affect or/
effect on the edge?
DVK-100 Instruction book
We’ve given you concepts and ideas.For more information please
read the instruction
27
HDR-40/50 HD Recorder with Removable HDD
The HDR-40 & HDR-50 are hard drive based video recorders
designed for studio desktop applications, recording in both
Standard and High Definition video via SDI. They have HDMI
output, and conveniently include SDI loop through.
Native
HDV (.m2t)
The recorders come with a 250GB removable hard drive and provide a
choice of 1080i, 720p, 576i and 480i recording formats. You can record
HD in either IBP or Intra-frame (I-frame), and in SD/IBP.
The recorded .M2T files are compatible with a wide range of NLE and
play-out solutions on the market. Once recording is completed, the hard
drive enclosure simply ejects and can connect via USB-2 to a PC or MAC
based NLE system. (USB 2.0 to mini-USB cable provided).
You can work directly from the removable drive, or copy video files into
the NLE's video drives. The remote control interface includes RS-422,
RS-232, and GPI for easy integration with other equipment. The only
difference between the two recorders is the HDR-50 is rack mounted.
Features

Embedded audio via SDI
Variable recording bitrates – records SD at 25Mbps and HD at 20-60Mbps
4:20:0 color sampling
Audio monitor function
2U height ﬁts in 19” standard rack mounts
Records audio as MPEG-1 Layer 2 format at 48KHZ, 384Kbps
Hard drive enclosure includes convenient USB 2.0
Removable hard drive
USB & E-SATA interfaces
HDD25
Dimensions
Weight: 6lb (2.8kg)
Power: 12V 4.2A DC 110/220 power supply included.
Front Panel
Speciﬁcations
Video
Input: HD-SDI and SD-SDI
Output: HD-SDI, SD-SDI, and HDMI
Audio
Input: Balanced stereo XLR
Video Recording Format
SD: 5Mbps to 15Mbps
HD: 20Mbps to 60Mbps
M2T recording format (compatible with most NLE systems)
Audio Recording Format
MPEG-1 Layer 2
Sampling rate: 48kHz
Bitrate: 384Kbps
Volume
Rear Panel
GPI
Control
GPI, RS-232, and RS-422 control interface (Sony control protocol compatible)
Power
12V 4.2A DC operation 110/220 power supply and cord included

HDR-50
(Rack Mounted)
Front Panel
Power
LCD Screen
Audio Levels
Volume
Removable
HDD
HDMI
Audio In OUT
VTR
Controls
HD-SD SDI
IN & OUT
Power
DC In 12V
4.2A
Removable Drive
Dimensions
DC In 12V 3A
GPI
RS-422/RS-232
Audio
Level
HDR-50 has the same speciﬁcations as the HDR-40.
VTR controls
Rear Panel
28
IEE 1394
Input File
Transfer
IEEE 1394
Input File
Transfer
RS-422
RS-232
Power
Audio HDMI OutHD/SD-SDI
In
IN & OUT
Weight: 7lb (3.5kg)
Power: 12V 4.2A DC 110/220 power supply included
DN-60 HDV/DV solid state CF card recorder
The DN-60 uses today’s solid state highcapacity CF memory cards to provide hours
of continuous HD recording. This enables
you to record in even the most challenging of
environments.
The DN-60 is powered by using four traditional or
rechargeable AA batteries. Standard AA batteries should
offer approximately 2 hours of continuous recording.
It connects directly to the existing DV or HDV camcorder
through a single FireWire cable. Once you are done
capturing video with the DN-60, use a CF reader to transfer
your media files onto a Mac or PC.
Features

Portable and shockproof
Removable CF card, compatible with FAT32 or NTFS ﬁle systems.
Use four standard AA batteries for more than two hours continuous
recording or use the included external power adapter
8 seconds pre-record buffer, useful in recording unexpected events
especially in science research, outdoor recording or security applications
Tripod and hot shoe mountable
Can be “triggered” to record by the camera
Removable
CF Card
(not included)
Speciﬁcations
Video
Input: IEEE 1394 Firewire
Output: IEEE 1394 Firewire
Audio
Inputs: IEEE 1394 Firewire
Outputs: IEEE 1394 Firewire
8GB: 37 minutes
16GB: 1:14 minutes
32GB: 2:28 minutes
File support includes: AVI, MOV, MXF-OP1A, M2T format, QuickTime
HDV and MXF-OP1A through MAC or PC software conversion program
DN-60BH
Shoe to ball head
(not included)

MPEG-1 Layer 2
Bitrate: 384Kbps

Control
Control Interface RS-232 compatible with Sony Protocol

Dimensions
Weight: 5.7 oz (160g)
Rear View
4 AA
Batteries
DV/HDV
IN/OUT
Camera Mount
1/4 Inch
Female
RS-232
29
DN-200 HDV/DV/Analog digital recorder
The DN-200 is a portable recorder
capable of extended recording times.
It comes with a built-in, large capacity
hard drive 250GB (HDD) that stores
the video.
The DN-200 comes with a 250GB HDD that
can record a minimum of 19 hours of video
depending on the format you select (DV or HDV).
It is an ideal replacement for tape recording.
You can drag and drop the video files directly
into the time-line of your video editing program.
It is also ideal for applications within Broadcast
TV, Education, Science, Medical, and Security
applications.
Features

Small size, easy to carry, high capacity hard drive recorder
Built-in 2.5" 250 GB HDD, record over 19 hours of DV or HDV
footage
Set record date
Comprehensive backlit LCD display for recording status
8 seconds pre-record buffer, useful in recording unexpected
events especially in science research, outdoor recording or
security applications
Tripod and hot shoe mountable
Manually triggered single frame recording
Play last video feature
File support includes AVI, MOV, MXF-OP1A and M2T format,
QuickTime HDV and MXF-OP1A through quick utility program
MPEG-1 Layer 2
Bitrate: 384Kbps
Control
RS-232 and GPI control interface
Power
12V 1A DC 110/220 power supply included
Specifications
Video
Inputs: DV and HDV, composite video
Outputs: DV and HDV, composite video via (A/V out)
Dimensions
Audio
Inputs: composite, IEEE 1394 Firewire
Outputs: IEEE 1394 Firewire, composite output via (A/V out)
Length: 7.8 inches (199mm)
Height: 1.3 inches (34.1mm)
Weight: 21.2 oz (600g)
Rear View
TC In
A/V Out
30
CVBS In
GPI
Audio In
RS-232
DV/HDV
IN/OUT
Power
Switch
DC In 12v 1A
DN-400/500 HDV/DV/Analog removable HDD recorder
The DN-400 and DN-500 video recorders allow
for file-based tapeless solutions, saving you hours of
capturing time.
Native
DV (.dv)
HDV (.m2t)
The DN-400 comes with a 250GB HDD and a removable hard
drive enclosure. One additional enclosure is included, if you
would like to purchase another HDD. Once you have completed
your recording, simply eject the hard drive enclosure and use USB
2.0 to connect to a PC or MAC based NLE system. The USB port
provides power to the unit. It’s perfect for use with laptops in the
field. You can work directly from the removable drive, or copy
video files to your NLE’s video drives.
USB & E-SATA interfaces
HDD25
Features
2.5” 250GB removable hard drive & extra enclosure included
Embedded audio via HD-SDI
IEEE-1394 port for connection to PC, MAC, and HDV device
Hard drive enclosure includes convenient USB 2.0 connector and
SATA connection
1U height fits standard 19” rack mount
Audio monitor function
Includes the FC-01 software utility to “wrap” file formats.

Dimensions
Weight: 11.5lb (5.2kg)
Front View
Specifications
VTR controls
Video
Inputs: HDV, DV, composite, SD component, and S-Video
Outputs: HDV, DV, composite, SD component, and S-Video
Note: Only the analog sources can be monitored during playback
Audio
Inputs: balanced stereo mini XLR
Outputs: balanced stereo mini XLR
SD: 5Mbps to 15Mbps
HDV: 20Mbps to 60Mbps
M2T recording format (compatible with most NLE systems)
MPEG-1 Layer 2
Bitrate: 384Kbps
Control
GPI, RS-232 (for firmware update only), and RS-422 control\
interface (Sony control protocol compatible)
Power
DN-500
Removable
drive
Headset
Volume
DV I/O
Rear View
Power
RS-232
Audio level
Audio
In/Out
composite In/Out
S(Y/C) In/Out
DV/HDV
In/Out
GPI
DC In
12V/4.2A
Mini-XLR
In/Out
RS-422
component In/Out
(Rack Mounted)
Front View
DN-500 has the same specifications as the DN-400
Power
VTR Controls
LCD Screen
Rear View
XLR outputs
XLR inputs
Volume
Audio Level DV/HDV
In/Out
Removable Drive
Dimensions
RCA Audio
In/Out
Depth: 9.4 inches (23.87mm)
Weight: 7 lb (3.5kg)
GPI
DC In 12V
composite
RS-422 DV/
4.2A
component In/
HDV
RS-232
S-Video
Out
In/Out
31
DN-300 HDV/DV/Analog HDD recorder
The DN-300 is an instant-on, "drag-and-drop" HDV/
DV Hard Drive Recorder. It accepts Digital or Analog
video inputs, DV/HDV (through Fire wire), component
(YUV), S-Video (Y/C) and composite (CV) inputs.
Every DN-300 includes a 250GB hard drive for over 19 hours
of recorded video. It boasts VTR-style controls with large,
illuminated buttons and a two-line backlit LCD display. These
buttons let the user select play, rewind, fast forward, fast
reverse, pause, frame advance, file selection, file delete and
loop play.
Other features include seamless repeat loop play (for trade
shows), variable speed forward or reverse play, and frame-byframe playback in forward and reverse.
Native
DV (.dv)
HDV (.m2t)
Features

Stand alone DV/HDV hard drive recorder/player
250 GB hard disk drive – record more than 18 hours
Records DV from either digital or analog inputs via component, composite
S-Video or Firewire
Included Accessories
DV file conversion software FC-01
Records HDV from HDV input via Firewire
Records direct to a native video format including HDV (.m2t) & DV (.dv)
while monitoring on an analog source
Can record and playback up to 99 tracks
Support DV time code
Full VTR playback functionality, including seamless looping
VTR-style buttons make it easy to use and navigate
Variable-speed playback, forward and reverse
Drag and drop file transfer to PC or Mac via Firewire
DV video saved as .dv files, HDV video saved as .m2t files

Quicktime/Reference movie
AVI Type 1 & 2, Reference AVI Type 1 & 2
Sony ES-3 DV Canopus AVI Type 1 & 2
Matrox RT2500/Design Suite DV
Sony DSR DU-1 DV (.dvd)
Avid DV OMF file
Raw DV (.dv/.dif/.dvsd)
Specifications
Video
Inputs: DV, HDV, composite, SD component, and S-Video
Outputs: DV, HDV, composite, SD component, and S-Video
Note: Only the analog sources can be monitored during playback
Audio
Inputs: unbalanced RCA
Outputs: unbalanced RCA
Control
GPI and RS-422 remote control interface
Power
Rear View
DV/HDV/FireWire
component
Input &
Output
composite &
S-Video In/Out
Analog Audio In/Out
Dimensions
Weight: 4.5 lb (2.1kg)
Power: 12V 4.2A DC operation
GPI Remote Control Interface
DC power 12V 4.2A
RS-232
interface
Power On/Off
RS-422 Control interface for machine control
32
MP-1000 Network media player
The MP-1000 is a versatile digital media player with
LAN and Internet Connectivity.
The MP-1000 stores its media and settings on the included 2 GB
Compact Flash™ card, and can be easily updated via a network
connection using the built-in Ethernet port. DVD quality content
can then be scheduled remotely or locally.
Support for RSS enables automatically updated scrolling text,
like news bulletins from leading broadcasters, with customizable
colors and opacity.
The MP-1000 supports the most popular media formats, such as
JPEG (for slideshows), MPEG-1, -2 and -4, AVI and DIVX movie
files and MP3 and WAV sound files.
The MP-1000 is rugged and stands up to the rigorous challenges of
today’s most demanding digital media applications. The compact
design also makes MP-1000 ideal for kiosks, digital signage
advertising and other small-footprint installations.
Rear View
RS-232
Features

S-Video Out
YUV Out
File formats supported: MP3, MPG1, MPG2, MP4, JPG, AVI, DIVX,
WAV, TXT, and RSS
Video Codecs supported: MPEG-1, MPEG-2, MPEG-4 (must be .avi
extension), DivX and Cinepak
Scheduled or menu-controlled auto-playback

Uses easily-available CompactFlash for storage – upgrade or replace
quickly and affordably. Supports up to 16GB in FAT32 format

Hundreds of units can be controlled and maintained remotely using
the included software

Scheduled content uploads
VGA
Out
composite In
Audio
Out
Ethernet
Setup Example
Specifications
Video
Input: all files uploaded through compact flash card or ethernet port

DC In
12V 0.5A
/&'
79021,725
/&'
79021,725
/&'
79021,725
Output: composite, S-Video, component, and VGA
Audio
Output: unbalanced stereo RCA
Power

$
9
$
9
$
9
03
03
6(59(5
03
7&3,3
Speciﬁcations
PCM wave (.wav)
Output:
Input:

CV x 1 (BNC connector)
S-Video x 1 (S-Video connector)
YUV x 1 (BNC connector)
VGA x 1(D-Sub 15 pins)
Unbalanced audio, stereo x
1 (RCA connector)
Video:
NTSC / PAL
BW= 5.0M <3dB
S/N > 50
Over or less Amplitude in Color bar <5%

RJ-45
Audio:
Maximum 6V p-p input without distortion
Bandwidth: 20Hz ~ 20kHz
S/N Ratio: >65 dB, THD: <0.1%
Video

Media format support:
Photo
JPEG (.jpg, .jpeg), up to to 5120 x 3840
resolution (output resolution: 640x480)

MPEG-1 (.mpg, .dat)
MPEG-2 (.mpg, .vob, .avi)
MPEG-4 SP, ASP* (.avi, .asf, .divx)
Motion-JPEG (.avi)
Video output: NTSC 640 x 480 or
PAL 720 x 576

* SP is simple proﬁle, ASP is Advanced SP
Audio

MP3 (.mp3) from 32K to 256K bps
33
CG-300/350 SD/ HD Character Generators
FREE DEMO DOWNLOAD: Visit www.datavideo.us
and click on "Character Generators".
The CG-300 and CG-350 are PC-based Character Generators designed for live and post production.
Both packages will work with a Blackmagic Design Decklink or AJA® Kona® LHe card as a downstream keyer. It can also be used to key and fill
sources (depending on the card). Please note: Key and fill is only available via SDI or HD-SDI. The CG-300 is a modest version of the CG-350.
The CG-350 includes Banner Crawl (continuously scrolling text) and Snyper (corner graphics, station IDs, and "coming up next" animation)
functions, and the CG-300 doesn’t. However, it is still a robust program for professional standard character generations.
Specifications

Supports resolutions from 320x240 to 1080i HD
Anti-aliased characters with leading, kerning and tracking, with two
edge and three shadow styles for each character.
32-bit color support (with transparency). Color can be selected by
adjusting RGB or HLS levels.
Create smooth gradients between any 2 colors in the characters, edges,
shadows, and shapes.
Character attributes can be drawn with custom textures (marble, wood
grain, etc). 16 different textures can be used on each page.
Up to 32 shapes per page. Each shape can be set to a solid color,
semi-transparent color, a color gradient, or a texture. The shapes can be
edged, colored, sized, italicized, and rotated just like text characters.
Up to 16 full-color logos can fine-positioned, overlapped, sized, etc. just
like characters.
1,000 Layers - Text, logos, and shapes can be placed on multiple layers,
each independent of the others. Layers can be named.
Support for BMP, JPG, GIF, PCX, TIF and TGA images.
Text Style Gallery - 1 button access to your 64 user-defined text styles
and each typefaces can use up to 25 Truetype different typefaces.
Character height, width, angle and rotation all customizable, and
independent from letter to letter.
Variable character and edge blurs, independent of each other.
System Requirements
CPU: Pentium® 4 2.0 GHz or higher
Ram: 1 GB or higher
Required Min. Disk Space: 15 MB
Screen Resolution: VGA, XGA
Network: 10/100/1000 Base T NIC
OS: Windows® XP/7 SP2 (with Direct X 9.0c)

Title Composer

Create static and animated title pages using editable text, layers,
graphic placements and shapes.
Hardware Support

Datavideo CG-300/350 utilizes the latest technology from
Blackmagic Design® and AJA to maximize quality and affordability.*
PCR-300HD Workstation with Software & Decklink HD Extreme
Workstation with software for SD or HD CG-300 installed in a
HP Compaq 6000 Pro Micro tower PC which includes 19” wide
screen LCD monitor and inclusive of a Decklink HD extreme card.
What to Order
Graphics Output
CG-300 KIT Software / Decklink HD Extreme
A kit that comes with the advanced window based character generator CG-300 software for SD & HD productions and Declink
HD Extreme Card; used as a downstream keyer (DSK).
This is an all inclusive workstation that comes with installed CG350 in an HP/Compaq 6000 Pro Micro tower PC includes: 19”
wide screen LCD monitor and a Decklink HD extreme card.
CG-350 KIT Software / Decklink HD Extreme
A kit that comes with the advanced window based character generator CG-350 software for SD & HD productions and
Declink HD Extreme Card; used as a downstream keyer (DSK).
CG-300 OR 350 - Software Only
This is a Microsoft Window based character generator for SD &
HD productions. Software requires Decklink HD Extreme Card or
* Blackmagic Design® does not support the use of Decklink® cards on the Dell computers, due to past incompatibilities. However, the CG-300/350 software
can also be used with an AJA Kona LHi card or AJA® Kona® LHe card, if you intend to use a Dell® computer.
34
CG-100 SD Character Generator
The CG-100 is a PC-based* SDI Character Generator that produces lower thirds, text rolls, text crawls and more.
The CG-100 can help create professional looking character generation at an affordable price. It can import .TGA animations, text files,
and still images and even use any font installed on your system. Eastern Asian right-to-left languages like Hebrew and Arabic can also
be applied (however, the character generator tools and menus are in English only). An added feature is the Live Operation Mode, in
which the CG-100 can also be used as a live on-screen typewriter.
Title pages can be composed and animated on any windows-based computer running the CG-100 at your event. Simply transfer any
generated files and the USB dongle key to any live event computer that contains a Blackmagic Design DeckLink card, and run the
sequence.
The CG-100 works easily with many of Datavideo’s switchers and Mobile Video Systems, like the SE-800, HS-800, SE-900 and MS900 to give superb quality graphics, text , and logo overlay on live productions. The CG-100 can also be used with other SDI or YUV
input switchers that have the Blackmagic Design DeckLink Studio and DeckLink SDI capture cards.**
Specifications
Image objects may be imported as graphics and stored as
part of the page.
Targa Sequence for animation
Animation including wipe, push & fade in various directions at
different speeds
Text can roll and crawl
Support Windows unicode for multi-language input.
Redo/undo function for quick testing of an animation
Support 16:9 or 4:3 aspect ratios & NTSC/ PAL video standard.
Standalone logo display function
Digital Clock Timer
GPI trigger by external GPI cable or by “Ctrl Key “ or “Right Click
on the mouse”

System Requirements

CPU: Pentium® 4 2.0 GHz or higher
Ram: 1 GB or higher
Required Min. Disk Space: 15 MB
Screen Resolution: VGA, XGA
Network: 10/100 Base T NIC
OS: Windows® XP/7 SP2 (with Direct X 9.0c)
DeckLinkStudio, DeckLink SDI
What to Order
PCR-100SDI Workstation with Software / Decklink SDI
This is an all inclusive workstation that comes with installed
CG-100SDI in an HP/Compaq 6000 Pro Micro tower PC includes: 19” wide screen LCD monitor and a Decklink HD extreme
card.
PCR-100STUDIO - Software / Computer / Decklink Studio
This is an all inclusive workstation that comes with installed
CG-100SDI in an HP/Compaq 6000 Pro Micro tower PC includes: 19” wide screen LCD monitor and a Decklink studio card.
CG-100SDI K - Software/Decklink SDI Card
production only comes with the Decklink SDI card.
CG-100STUDIO K - Software / Decklink SDI Card
production only comes with the Decklink Studio cardIncludes
analog I/O.
CG-100 Software
production only; requires a Decklink SDI or Studio card.
* Blackmagic Design® does not support the use of Decklink® cards on the Dell computers, due to past incompatibilities.
**The CG-100 does not produce character generation for HD media
35
021,7256'DWDYLGHR0RQLWRU6HULHV
TLM-170/D
TLM-170M/MD
021,725
6\VWHP
3DQHOV
5HVROXWLRQ3L[HO
%DFNOLJKW
9LHZ$QJOH'HJ
%ULJKWQHVV&RQWUDVW
&RORU7HPS$GMXVW
9,'(2
&9<8969LGHR
+'6',+'0,9*$
%\SDVV&92XW
$8;5*%
'9,(((SRUW
$8',2
+HDGSKRQH
9ROXPH&RQWURO
6SHDNHU
&211(&7,216
2YHU8QGHUVFDQ
7DOO\/(',QGLFDWRU
7DOO\,QSXW
$VSHFW
)OLS0LUURUHIIHFW
63(&,),&$7,216
'HSWK
:LGWK
+HLJKW
:HLJKW
3RZHU
237,21$/
TLM-700
Standalone Unit
7" TFT LCD
480 x 234
CCFL
T: 40, B: 60, L/R:60
500cd/m² - 300
N/A
TLM-700PD
TLM-700HD
Standalone Unit
Standalone Unit
7" TFT LCD
7" TFT LCD
800x480
800x480
LED
LED
T: 60, B: 40, L/R: 60 T: 60, B: 40, L/R: 60
300cd/m² - 500
300cd/m² - 500
Yes
Yes
2x CV
1x CV, 1x YUV
1x HD-SDI,
1x HDMI
1x CV, 1x YUV
1x HD-SDI,
2x CV, 1x YUV
1x S-Video, 1x HD-SDI
(TLM-170D/MD Only)
1x HDMI
No
No
No
1
Yes
No
1
Yes
No
1
Yes
2
No
No
No
4:3 / 16:9
No
No
2 Color
15-Pin
4:3 / 16:9
Yes
No
2 Color
15-Pin
4:3 / 16:9
Yes
Yes
2 Color
3.5mm Jack
4:3/16:9/16:10
No
1.5 in / 38mm
7.3 in / 127mm
5 in / 184 mm
1.5 lbs / 0.8 kg
6W
1.5 in / 38mm
7.3 in / 184mm
5 in / 127mm
2 lbs / 0.9 kg
18W
1.5 in / 38mm
7.3 in / 184mm
5 in / 127mm
2 lbs / 0.9 kg
18W
2 in / 51 mm
19 in / 483 mm
13.3 in / 338 mm
3.3 lbs / 1.5 kg
15W
50,000 hours panel life
TLM-170: Desktop
TLM-170M:1U rack-mounted pull shelf
TLM-170/D/M/MD
Rack Mountable 1U
17" TFT LCD
1440 x 900
CCFL
T: 60, B: 60, L/R:70
500cd/m² - 700
N/A
TLM-170D: HD-SDI, Desktop
TLM-170MD: HD-SDI, 1U
rack-mounted shelf
5($59,(:
36
$OOPRQLWRUVDXWRGHWHFW176&3$/VLJQDOVWDQGDUG$OOPRQLWRUV &DQGHODSHUVTXDUHPHWUH
KDYH%ULJKWQHVV&RQWUDVW&RORU$GMXVWPHQW
$OOPRQLWRUVKDYH7LQWDGMXVWPHQWH[FOXGLQJWKH7/0ZKLFK
GRHV127LQFOXGHWKLVIHDWXUH
FGPð9LHZDQJOHDEEUHYLDWLRQV
7 7RS% %RWWRP/ /HIW5 5LJKW
$OOPRQLWRUVVKRZQKDYHDSRZHULQSXWRI'&9DQG'2127
KDYHXQEDODQFHGDXGLRLQSXWRXWSXWRU'9DXGLR
TLM-702
Rack Mountable 3U
7" TFT LCD
480 x 234
CCFL
T: 40, B: 60, L/R: 60
500cd/m² - 300
N/A
TLM-702HD
Rack Mountable 3U
7" TFT LCD
800 x 480
LED
T: 40, B: 60, L/R: 60
500cd/m² - 400
Yes
TLM-702PD
Rack Mountable 3U
7" TFT LCD
800 x 480
LED
T: 40, B: 60, L/R: 60
500cd/m² - 400
Yes
TLM-433
Rack Mountable 19" 2U
4" x 3 TFT LCD
480 x 272
CCFL
T: 80, B: 80, L/R: 80
240cd/m² - 400
N/A
TLM-404H
Rack Mountable 19" 2U
4" x 4 TFT LCD
960 x 240
CCFL
T: 10, B: 30, L/R: 60
350cd/m²150
N/A
4x CV, 4x CV Out.
1x Y.U.V., 1x HDMI
1x CV, 1x component
1x HD/SD-SDI
1x
1x
1x
1x
3x CV, 3x CV Out
-
4x CV, 4x Cv Out, 4X
AUX RGB
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
2 Color
3.5mm Jack
4:3/ 16:9
No
Yes
2 Color
15-Pin
4:3 / 16:9 / 15:9
YES
Yes
2 Color
15-Pin
4:3 / 16:9 / 15:9
YES
Yes
1 Color
15-Pin
4:3 / 16:9 Selectable
No
No
3 Color
15-Pin
4:3
No
2.5 in / 64 mm
19 in / 483 mm
5.3 in / 133 mm
5 lbs / 2.3 kg
30W
2.5 in / 64 mm
19 in / 483 mm
5.3 in / 133 mm
5 lbs / 2.3 kg
30W
2.5 in / 64 mm
19 in / 483 mm
5.3 in / 133 mm
5 lbs / 2.3 kg
30W
3 in / 76 mm
19 in / 483 mm
3.5 in / 89 mm
3.3 lbs / 1.5 kg
15W
3 in / 76 mm
19 in / 483 mm
3.5 in / 89 mm
4 lbs / 1.8 kg
HD/SD Y.U.V.
HDMI, 1x CV
component
HD/SD-SDI
50W
50,000 hours panel
life
37
Converters, Distribution Amplifiers, Audio Delays
MODEL
Type
Power Consumption
Product Description
DAC-7 / DAC-7L
Converter
DC 12v 1.0A
Designed to convert
analog video and audio
to SD-SDI, allowing
transmission of high quality
video over distances of up
to 200 meters.
DAC-8
Converter
DC 12v 1.0A
Converts from HD/SD-SDI
video and audio sources to
HDMI. Quickly connect to
LCD and Plasma televisions
as well as video projectors.
DAC-9
Converter
DC 12v 1.0A
Connect HDMI devices
to professional SDI
equipment, like video
switchers or recorders,
up to 200 meter.
DAC-50
Converter
DC 12v 1.0A
A HD/SD-SDI to
Y:U:V component &
composite Video signal
converter with built in
up/down scaling
VP-445
Distribution Amplifier
DC 12v 500mA
Four way HD/SD
SDI Distribution
Amplifier with
Embedded Audio
Input: composite
BNC, S-Video,
component
Output: 2x BNC
connector for SDI
signal
Input: 2x BNC
Connectors for HD/
SD-SDI
Output: HDMI
Input: HDMI
Output: 2x BNC
connectors for HD/
SD-SDI
Input: HD-SDI/SD-SDI
Output: Y:U:V
/ component or
composite signal
Input: 1x SDI
(HD or SD)
Output: 4x SDI
(HD or SD)
Cross convert from
1080i to 720p
Up/down scale
resolution
VIDEO CONNECTIONS
AUDIO CONNECTIONS
2x unbalanced audio,
Input: 2x balanced,
XLR connector. 2x
RCA connector
unbalanced stereo
audio, RCA connector
OPTIONS
MODE
NTSC or PAL
REAR VIEW
38
The DAC-7 mounts
between camera and
tripod while the
DAC-7L is a stand
alone unit.
The DAC-8 also
embeds the HDMI
audio in the SDI
stream.
The DAC-9 also
embeds the HDMI
audio in the SDI
stream
Only NTSC or PAL.
Not a dual standard
device.
Only NTSC or PAL.
Not a dual standard
device.
Only NTSC or PAL. Only NTSC or PAL.
Not a dual standard Not a dual standard
device. The DAC-9 is device.
not compatible with
the HDMI output from
the Sony camera
only.
Does not up or
down convert HD
or SD.
Converters, Distribution Amplifiers, Audio Delays
AD-100
Audio Delay
DC 12v 2.5A
Allows you to synchronize video
and audio. The unit features
traditional RCA connectors
as well as professional XLR
connectors.
VP-299
Distribution Amplifier
DC 12V 0.5A
One in, four out S-Video and
composite video distribution
amplifier. Has a built-in video
amplifier. Used to distribute one
signal into many.
TBC-1000
Time Base Corrector
DC 12V 1.2A
Used to improve video signal
quality for better, cleaner video
captures. Most video camcorders
produce relatively unstable,
poorly-synchronized signals.
TBC-5000
Time Base Corrector
DC 12V 1.5A
A compact and flexible 4
channel Time Base Corrector
and Matrix Switcher.
Input: S-Video and composite
Output: S-Video and composite
Input: S-Video and composite
Output: S-Video and composite
Input 4x composite & 4
S-Video with genlock TBC.
Input: unbalanced RCA and
balanced XLR
Output: unbalanced RCA and
balanced XLR
Input: unbalanced RCA
Output: unbalanced RCA
Input: unbalanced RCA
Output: unbalanced RCA
Low power consumption. It can
be powered by Datavideo PD-1
power distribution center.
4:2:2 sampling rate, 13.5MHz
8-bit video resolution
Built-in distribution amplifier
(4 outputs)
NTSC or PAL
Auto Detection NTSC or PAL
Auto Detection NTSC or PAL
Supports both NTSC and PAL.
8-bit internal processing
39
Datavideo Accessories
For SE-500
For SE-500
RMC-150
IP / Internet Control Box
VP-314
DV Repeater 1 to 1
CA-64
4-pin to 6-pin Adapter
TB-5
Tally Box with Tally Indicator
ITC-100SL
Intercom Belt-pack
CB-7
GPI Cable 3.6ft
CAD-01
Balanced to Unbalanced (XLR to
RCA) audio attenuator (set of 2)
PD-1
CB-10
9ft HD-YUV Cable
For ITC-100 Headset
CB-15D
0.9ft DV Cable
CB-1
150ft Minijack Tally Cable
CB-2
S-Video-to-BNC Splitter Cable
CB-15U
CB-8
Minijack-to-XLR Adapter
CB-3
CB-4
0.9ft DV Cable
(CB-3) 60ft 5-Pin Intercom
(CB-4)150ft 5-Pin Intercom
HDD25
Removable Hard drive carrier
CB-21
5.4ft DVI-I to VGA Cable
Cables
BH-05
Ball & socket head for mounting
LCD monitors or similar to a tripod
40
Datavideo Accessories
For SE-800
For SE-800 / SE-800AV
RMC-120
RMC-180
RMC-140
IP / Internet Control Box
For Panasonic PTZ cameras
Next Source & Tally box
For SE-1000
TB-10
Tally Box with Tally Indicator
For ITC-100
TD-1
LP-1
Intercom Gooseneck Light
Tally Light Indicator
For ITC-100
BAC-03
Balanced / Unbalanced
Audio Converter
MC-1
Microphone Headset
CA-2066
60ft DV cable
MC-2
Intercom Gooseneck
Microphone
CB-20
5.4ft DVI-HDMI Cable
CA-2266
5.4ft 6-pin to 6-pin DV Cable
CA-2264
5.4ft 6-pin to 4-pin DV Cable
CA-1066
CB-19
5.4ft DVI-D Cable
30ft DV cable
CKL-200
2.5m
1.2m
PPT-100
Firewire Scan Converter
Software
RF-1225FP
Fire Retardent Retro-Reflective
Cloth
DN-60BH
Shoe to ball head
11.23.2010:02:00PST
w w w . d a t a v i d e o . u s
Datavideo Distributor / Reseller
Datavideo Global Offices
Datavideo Corporation
7048 Elmer Avenue.
Whittier, CA 90602,
U.S.A.
Tel:+1-562-696 2324
Fax:+1-562-698 6930
E-mail:contactus@datavideo.us
Datavideo UK Limited
Unit 2 Waterside Business Park
Hadfield, Glossop,
Derbyshire SK13 1BE, UK
Tel:+44-1457 851000
Fax:+44-1457 850964
E-mail:sales@datavideo.co.uk
Datavideo Technologies (S) PTE Ltd
No. 178 Paya Lebar Road,
#06-03,
Singapore 409030
Tel:+65-6749 6866
Fax:+65-6749 3266
E-mail:sales@datavideo.sg
Datavideo Technologies Europe
Floridadreef 106
3565 AM Utrecht,
The Netherlands
Tel:+31-30-261 96 56
Fax:+31-30-261 96 57
E-mail:info@datavideo.nl
Datavideo Technologies China Co
102,No.618
LiuYing Rd, Zhabei District
Shanghai, China
Tel: +86 21-5603 6599
Fax: +86 21-5603 6770
E-mail:service@datavideo.cn
Datavideo Technologies Co. Ltd
10F. No. 176, Jian 1st Rd.,Chung
Ho City
Taipei Hsien 235, Taiwan,
R.O.C.
Tel: +886-2-8227-2888
Fax: +886-2-8227-2777
E-mail:service@datavideo.com.tw
Datavideo Hong Kong LtdG/F.,26
Cross Lane
Wanchai, Hong Kong
Tel: +852-2833-1981
Fax: +852-2833-9916
E-mail:info@datavideo.com.hk
U.S.A. Phone (562)696-2324