infofiche_Quatro Canal_USA

Transcription

24V EC MOTOR
High performance technology
QUATRO CANAL HYBRID
4-pipes connection
- dry and wet cooling
- 24VDC EC_motor
- low temperature radiator
- heating & cooling
Options
-- height adjustable feet for raised floors
-- empty shafts, all standard lengths (for the filling of empty space)
-- corner piece (connecting and finishing of corners)
-- Jaga 2-way valve 24 V
Grill colour *
Grill
* fill in grill colour (BNC)
Wooden grille
13 mm
BNA Alu nature
6 mm
0.24”
width (cm)
QUAF. 013 080 27 / BNA / XXX
Aluminium grille
12 mm
Length (cm)
CODE: nomenclature
Height (cm)
-- width 10.63”
-- lenghts (cm): 80 - 110 - 160 - 180
-- minimal build-in height 5.12”, adjustment untill 6.89”
-- 4-pipes Low H2O Heat Exchanger
-- 0...10V speed control
-- mounting / protection panel
-- stainless steel flexible connections
-- thermal activators: 24 VDC
-- continuous grille
-- can be installed as a continuous product, open spaces can be filled with empty ducts
-- heat exchanger with collector with low resistance
-- duct of Sendzimir galvanized steel plate, coated with a charcoalgrey scratch-proof epoxypolyester paint
Code
Benefits
BNC/... Alu lacquered
BON Oak
BBN Beech
12 mm
0.47”
9 mm
0.35”
BOV Oak varnisched
BBV Beech varnisched
13 mm
0.59”
Quatro Canal Hybrid: heating and cooling
Length
(cm)
Length
(inch)
CODE
• Heating BTU/h
(med)
080
31.65
QUAF.013 080 27 /... / ...
1783
110
42.52
QUAF.013 110 27 /... / ...
3200
160
62.83
QUAF.013 160 27 /... / ...
4914
2814
180
70.87
QUAF.013 180 27 /... / ...
5943
3598
Fill in Grill code
Fill in Grill colour code (BNC)
6 mm
•
•
• Cooling (total) BTU/h
(med)
9 mm
1015
1799
Flow water T°: 140°F, return water T°: 120°F, air inlet T°: 70°F
Flow cooling water T°: 45°F / Return cooling water T°: 55°F / Air
inlet T°: 88°F dry bulb T°: - 50% RH (relative humidity)
Range
T 80
T 110
T 160
T 180
31.65”
42.52”
62.83”
70.87”
H 5.12” > 6.69”
10.63”
JAGA Export_Tel: +32 11 29 41 16_e-mail: export@jaga.be
1
1
protection panel (wood)
2
ALU grille (standard)
3
cover plate
4
dynamic Low-H2O heat exchanger with stainless steel flexible connections, length 15 cm
1/2”
5
tangential fan(s) with EC motor(s)
6
internal height adjustment
7
condensate drain
8
end caps
9
external height adjustment with sound
decoupling.
10
2
5
3
4
enclosure made of Sendzimir galvanized
steel plate
7
6
10
8
electrical connection (always left)
hydraulic connection (always left)
condensate drain connection
9
Dimension (inch)
L
12.20”
4.52”
2.95”
10.63”
2.3”
2.3”
5.1”
0.9”
>
condensate
1.57”
drain
Ø3
Ø0.7”
4
6
0.98”
2.3”
9.64”
1.57”
Type
3.46”
L (cm)
L (inch)
80
80.4
31.65
110
108.0
42.52
160
159.6
62.83
180
180.0
70.87
Quatro Canal_options & accessories
Height adjustment (inch)
0.31
< Fine adjustment height
max 0.8
Internal height adjustment (max 0.31”)
min 5.12” > max 5.43”
external height adjustment:
max 1.77”
< Height adjustment
Height adjustable feet for raised floors
Order CODE
H (inch)
5208.05070000
1.97 > 2.76
5208.08130000
3.15 >5.12
5208.13230000
5.12 > 9.06
5208.20300000
7.87 > 11.81
2.36
11.02
H
-3 feet per unit
-height adjustable feet for
raised floors
-painted in the colour black RAL
7024
-1 set contains 2 height adjustable feet
9.84
3.54
Empty shafts (all standard lengths)
To fill open spaces for a continuous installation
- with protection panel
- without connection perforations
- with continuous grille
- with height adjustments and
fine height adjustment
- with end caps
L
27
13 > 17.5
T
Order CODE
Length (cm)
Length (inch)
80
QUAD.01308027/.../...
80.4
31.65
110
QUAD.01311027/.../...
108.0
42.52
160
QUAD.01316027/.../...
159.6
62.83
180
QUAD.01318027/.../...
180.0
70.87
Fill in Grill code
Fill in Grill colour code (BNC)
Corner piece
Connecting and finishing of
corners
- with protection panel
- with height adjustment
Order CODE
QUAD.013 036 27/BNA
QUAD.013 036 27/BNC/...
Grill
Alu. natural
Alu. lacquered
Fill in Grill code
eg. with /BNA or /BNC Grill
eg. with /PLA cover plate
QUAD.013 036 27/PLA
Cover plate, in RAL 9006
Quatro Canal _accessories
Option: 0...10V Thermostat
0...10 V Control and Thermostat
for EC motors and valves
------
control per room
control heating system
control cooling system
control outputs 0-10 VDC
7-day program: 8 programmable timers to switch over between Comfort and
Economy mode
power supply 24 VDC
automatic or manual heating / cooling
changeover
fan speed automatically or manually in 3
steps (3V - 6V - 8V)
back-lighting LCD display
minimum and maximum limits of the desired temperature
------
Order CODE
Description
8751.050009
Room regulator with LCD
5.04
3.66
1.14
Jaga Clock Thermostat
-- automatic thermostat.
-- day- night- and week program.
-- ventilators: auto / continuous.
Order CODE
Description
7990.073
Jaga Clock Thermostat
4.92
3.54
Connection sets
set
94
Connectionset 24 VDC (0...10VDC)
set
Two return valves M24 180°
91
valve set with 24 VDC motor-controlled valve (0...10VDC)
• with varistor to protect against overload
• with indicator (open/closed)
Order CODE
CODY.AA4.10.3...
Description
valve G1/2” x M24 180°
return valve G1/2” x M24 180°
Order CODE
Description
CODY.LOS.00.3...
M24 180°
1.34
Quatro Canal_accessories
Power Supply
- small mounting depth
- safety: UL1310 Class 2
- convection cooling
- DIN-rail or wall mounting
5.3
1
CODE
Description
7990.050
31 W
7.1
4
1
8.9
4
1
4
DC LO
DC ON
9.1
Technical data
5.5
7990.051
60 W
7990.052
100 W
The warranty is only valid when using the original Jaga power supply.
7990.053
240 W
Required power = sum of the power consumption of the equipments
L
N
L
5 6
N
L
5 6
N
5 6
Order CODE >
7990.050
7990.051
7990.052
7990.053
VDC
A
Watt
VAC
lbs
1
24-28
1,3
31,2
90-264
0.44
1
24-28
2,5
60
90-264
0.55
1
24-28
4,2
100,8
90-264
0.70
1
22.5 - 28.5
5
240
93-132 / 186-264
1.98
Phases
Output voltage between
Output current
Power
Input voltage (single phase)
Weight
Overload protection:
LED Display:
120 - 145%
Green LED = on, Red LED = DC output Low
Operating temperature:
-13 tot +159,8 ° F
Cable length in factor of number of motors (max. lose of tension 5%)
Number >
Type 1
Wire size
17 AWG
16 AWG
14 AWG
Number >
Type 2
Wire size
17 AWG
16 AWG
14 AWG
Number >
Wire size
17 AWG
16 AWG
14 AWG
2
3
4
1
2
3
4
Max. Cabellength
196
98
65
295 131
98
65
492 229 164
Type 3
Wire size
17 AWG
16 AWG
14 AWG
Number >
1
Max. Cabellength
295 164
98
459 229 131
787 393 262 196
1
2
3
4
Max. Cabellength
98
33
33
164 65,
295 131
98
65
Type 4
1
2
3
4
5
6
65
98
164
131
5
6
7
8
9
10
11
12
13
14
15
16
17
18
>23 > 47
16
17
18
19
> 30
18
19
20
33
65
98
7
33
98
8
65
9
10
11
12
33
13
14
15
33
33
98
5
65
33
6
7
8
9
6
7
8
9
10
11
12
13
14
15
16
17
10
11
12
13
14
15
16
17
33
33
5
Max. Cabellength
98
32
32
131
65
32
32
229
98
65
32
Quatro Canal_ technical data
Jaga Quatro Canal: Technical data
Type 1
Type 2
Type 3
Type 4
Cooling (total) BTU/h
• (45°F/55°F/80°F)
Size
Med
1015
1799
2814
3598
Max
1381
1791
2067
2662
Cooling (sensible) BTU/h
Med
598
1058
1657
2116
• (45°F/55°F/80°F)
Max
813
1438
2252
2877
Water flow cooling GPM
Med
0.16
0.27
0.43
0.55
Heating BTU/h
130°F AWT / 70°F)
Med
946
1645
2571
3312
Max
1264
2237
5788
4475
Water flow heating GPM
Med
0.16
0.27
0.43
0.55
Heating BTU/h
• (140°F / 120°F / 70°F)
Med
1783
3200
4914
5943
Max
2606
4206
6583
8179
Water flow heating GPM
Med
0.43
0.70
1.09
1.35
CFM
(Cubic feet per minute)
Med
35
71
105
104
High
41.3
83.7
128.6
167.5
Heat Exchanger (coil)
Fins Per Inch (FPI)
0.08 (48 fins per 3.94 inch)
Face Area ft
10.08
2
Coil connections inch
Quantity
Fan
Width inch
Sound pressure
Voltage
2+2
1x14.17
1x24.8
1x14.17, 1x24.8
2x24.8
Consumption Watt (med)
-
-
-
-
Consumption Watt (max)
3.5
5
8.5
10
Quantity
1
1
2
2
RPM Speed med (8 VDC)
1100
RPM Speed max (10VDC)
1300
dB(A) Med speed
-
-
-
-
dB(A) Max speed
30
30.5
31.5
33.5
Volts
24VDC
Height, inch
adjustible between min. 5.12 > max. 6.69
31.65
42.52
Width, inch
10.63
Fine adjustment height
max 0.39
Weight lbs
•
•
1+2
2.36
JAGA Controller 1 room / JAGA Controller for multiple areas
Length, inch
Cabinet
1
Diameter inch
Control
EC Motor (24VDC)
3/4
1
28.22
38.8
62.83
70.87
56.44
63.49
Flow water T°: 140°F, return water T°: 120°F, air inlet T°: 70°F
Flow cooling water T°: 45°F / Return cooling water T°: 55°F / Air inlet T°: 88°F dry bulb T°: - 50% RH (relative humidity)
Quatro Canal_ pressure drop
Pressure drop
ΔP
[Kpa]
100
80
60
50
40
30
Work pressure: 10 bar
ΔP
[inch H2O]
402
321
241
201
161
121
0.66
2
8.04
0.33
0.26
0.20
0.16
0.13
0.10
1
0.8
0.6
0.5
0.4
0.3
4.02
3.21
2.41
2.01
1.61
1.21
0.06
0.2
0.80
0.03
0.1
0.40
2.64
3.52
4.4
1.32
1.76
0.88
0.44
0.26
0.35
0.13
0.18
0.066
0.088
600
800
1000
40.2
32.1
24.1
20.1
16.1
12.1
300
400
10
8
6
5
4
3
200
3.34
2.67
2.00
1.67
1.33
1.00
100
80.40
60
80
20
30
40
6.69
15
20
Pressure drop in Ft/Hd, Kpa, inch H2O
[Ft/Hd]
33.45
26.76
20.03
16.72
13.38
10.03
L 080
L 110
L 160
L 180
ΔP
Water flow in LPH / GPM
LPH
GPM
Quatro Canal_product description
Standard delivery
Pre-assembled heating, cooling appliance for installation in the floor,
consisting of:
-a 0.04” -thick duct of Sendzimir galvanized steel plate and a telescopically adjustable height adjustment with stainless steel grille
holder, coated with a charcoal grey scratch-proof epoxy polyester lacquer, RAL 7024, duct 10% gloss.
The appliance is equipped as standard for heating and for connection
to traditional water heating systems, but can also be used for cooling
with a chilled water supply, and for connection to mechanical ventilation systems
-a minimum recess depth of 5.31” below finished floor level is required. The appliance is equipped with a height adjustment from 0” to
1.77” and a fine height adjustment up to + 0.31” to perfectly align the
appliance with the finished floor
-the shaft is equipped with 4 openings for the passage of the hydraulic
lines and 1 opening for the electric cables. These openings - in the
side – are sealed with black insulation tape
-the shaft is also equipped with a condensate drain ø 1.26/008”
-two end caps are supplied, equipped with a stainless steel grille support and aluminium rivets with countersunk heads for finishing the
ends of the inner duct
-all components are secured with special spring steel suspension
hooks, so all the parts can be removed extremely quickly and easily
for regular cleaning and maintenance without hydraulic or electrical
disconnection
-anodized aluminium grille(s)
-Low-H2O heat exchanger
-thermal activator(s), (tangential mini activator)
-protection panel
-4 pieces stainless steel flexible connections 1/2”, length of 0.59 up to
0.98”
Aluminium grille
Aluminium floor grille bars, length 14.17” with EPDM holder 0.65”.
-profile: 0.24 x 0.55”
-spacing 0.35”
-material: anodized aluminium
Low-H2O heat exchanger
1 heat exchanger for heating or cooling. Round, seamless circular
pipes in pure copper, connected to pure aluminium panels with a mutual distance of 0.07” and an integrated brass collector, including air
venting.
- the heat exchanger electrostatically lacquered with black epoxy-polyester, gloss degree 70%.
- element pressure test: 290 psi
- operating pressure: max 145 psi
- standard connection left.
Activators
One or more tangential activators, 24 VDC, with Sendzimir galvanized
steel plate cover and integrated stainless steel air filter.
Colour black, glossiness 70%.
Options
-empty duct(s) with height adjustment, comprising a 0.04” duct of
Sendzimir galvanized steel plate, coated with an charcoal-grey
scratch-proof epoxy polyester lacquer, RAL 7024, 10% gloss, with
stainless steel grille and protection panel
- connecting / finishing of corners 90 °Corner piece with height adjustment, comprising a 0.04” duct of Sendzimir galvanized steel plate,
coated with an charcoal-grey scratch proof epoxy polyester lacquer,
RAL 7024, 10% gloss.
Cover plate made of aluminium.
- telescopically adjustable feet for raised or hollow floors, lacquered in
the colour black RAL 7024:
- Type 1: adjustable between 3.94” and 5.91”
- Type 2: adjustable between 5.51” and 7.87”
- supply 31.2 W / 60 W / 100.8 W
- Low Profile for Building Automation
- output 24 VDC
- Class II Double Insulation
- -13 to +159.8°F Operation
- convection cooled
- DIN Rail or wall mounting
How to install
The installer will propose all the heating elements, while taking into
account the following requirements:
-a heat loss calculation according to the standard guidelines for the
regions
- heat emission and measurement tables in compliance with the tables
and Quatro Canal fitting instructions supplied by the manufacturer
-the heating elements are connected to a four-pipe system / singlesided connection. Standard connections left
-install the Quatro Canal with the convector side towards the exterior
side of the room
-the distance between the Quatro Canal and the window should allow
for any curtains. Curtains should never be hung above the Quatro Canal. The heating element should be accessible at all times for maintenance.
- if the appliance is not mounted directly on the floor, the space between the bottom of the appliance and the floor must be filled with a
stable filling, e.g. concrete infilling.
Manufacturer: Jaga N.V.
Type: Quatro Canal
Electric connection
Integrated electric connection box with manual tension spring system.
Standard connection left.
Jaga reserves the right to change product specification at any time in line with our policy of continuous improvement and innovation.
June 11, 2015 11:40 AM - Jaga N.V.

infofiche_Quatro Canal_USA

Transcription

Similar documents

GE Lighting