One Brand Head to Toe - IPP

Transcription

One Brand
Head to Toe
Custom FX-R Gear
Custom Assault™ Gear
Custom Proximity Gear
Express Gear™
Opportunity™ Gear and Chieftain® Turnout Gear
Extrication, Wildland, USAR, and EMS Gear
Boots
Gloves
Helmets
Hoods
DuPont™ Nomex® and Kevlar® brand fibers provide superior
strength, durability and thermal protection that stands up to the heat.
Egress Necessities
Accessories
1
Fire-Dex Custom Turnout Gear
Fire-Dex custom gear allows you to select from thousands of options, including a wide
range of outer shells, thermal liners and moisture barriers. We use the highest quality
fabrics that contain the proven technology of KEVLAR® and NOMEX® for premium
strength and flame resistance. Our thermal liners and moisture barriers provide the
safety and comfort you depend on, and we offer the most popular trim configurations
to suit the needs of firefighters all over the world.
Outer Shell Comparison Chart
Scale: Poor, Fair, Good, Very Good, Excellent.
Nomex®
Nomex®/
Kevlar®
Basofil®/
Nomex®/
Kevlar®
P84®/
Kevlar®
Armor®
Advance
Ultra®
PBI/
Kevlar®
Millenia
XT®
PBI Max®
Blend
100% Nomex
IIIA
40% Nomex/
60% Kevlar
30% Basofil,
30% Nomex,
40% Kevlar
40% P84/
60% Kevlar
30% Nomex/
70% Kevlar
60% Kevlar,
20% Nomex,
20% PBO
40% PBI/
60% Kevlar
40% Zylon/
60% Technora
70% PBI/
30% Kevlar
Colors
Yellow, Black,
Tan, Red, Blue
White
Khaki, Yellow,
Black, Bronze,
Brass, Gold
Gold or Black
Light Gold,
Dark Gold
Gold or Black
Gold
Gold or
Black
Gold
Gold or Black
Approx Wt.
7.5oz
7.2oz
7.8oz
7.5oz
7.1oz
7.2oz
7.5oz
7.5oz
7.0oz
Strength
After UV
Very Good
Very Good
Good
Very Good
Excellent
Good
Excellent
Excellent
TPP Factor*
Good
Very Good
Excellent
Very Good
Very Good
Excellent
Good
Fair
Stength
After TPP
Poor
Good
Fair
Good
Excellent
Fair
Excellent
Excellent
Tensile
Strength*
Very Good
Very Good
Good
Very Good
Excellent
Excellent
Excellent
Excellent
Tear-Trap
Strength*
Very Good
Very Good
Good
Very Good
Very Good
Excellent
Excellent
Excellent
Abraison
Resistance
Very Good
Very Good
Good
Very Good
Excellent
Excellent
Very Good
Excellent
Degredation
Temperature
700oF
900oF
1000oF
1000oF
900oF
1300oF
1200oF
1300oF
Cut
Resistance
Good
Excellent
Very Good
Excellent
Excellent
Excellent
Excellent
Excellent
Thermal
Damg. Control
Poor
Good
Good
Good
Very Good
Excellent
Excellent
Excellent
Cost
$
$$
$$
$$
$$$
$$$
$$$
$$$
$$$
AKA
Brigade,
Defender
Crusader,
Advance,
Fusion
Omni Vantage
P84/Kevlar
n/a
n/a
Gemini XT
PBO
n/a
Trim Configurations
* Represents Test Methods Specified by NFPA 1971
Fire-Dex NFPA 1971 compliant trim configurations create the highest visibility.
XT00- 2" & 3"
Combination NFPA
XT01
2" NFPA Standard
2
XT02
3" NFPA Standard
XT03
3" NYC
XT04
3" HighVisibility
XT05
3" Project Fires
Fire-Dex Custom FX-R Gear
FX™ gear has been redesigned to be unlike anything else on the market. The new FX-R coat
has less fabric, weighs less, and allows for a better range of motion.
The new, patent-pending OmniDex Cut has moved the shoulder-sleeve interface inward
to the natural bend-point of the shoulder. Moving the shoulder inward has revolutionized
the way the coat moves with the body. The weight of the coat is no longer lifted when the
wearer lifts their arms. Because the coat is no longer being lifted by the wearer, the air pack
is also able to stay in its proper place and not be shoulder-pressed when reaching upward.
The OmniDex Cut has also dramatically reduced the rise of the coat when reaching as well.
This revolutionary cut has created a coat that moves like the human body does, eliminating
the need for a back pleat and reducing the size of the sleeve pipe; this has reduced bulk, the
amount of fabric, and therefore weight of the coat too.
Coat Features
Coats come standard in 28", 32", or 35" lengths (custom lengths available)
Patent pending OmniDex Cut
FX-R Collar has a pleat in the shell fabric for a more secure fit while still allowing for a
seamless moisture barrier and is NFPA compliant without a throat strap, allowing for
better interface with the SCBA face mask.
Variety of pocket options
DexFlexTM Elbow help the garment move with the wearer
2 snaps to secure the liner to the hem of the outer shell
3M™ Scotchlite™ Reflective Material in your choice of color and configuration
Pant Features
Athletic cut pattern, mid rise pant
Option of no rear panel, 3" or 6" rear panel
DexFlex™ Knee allows the leg to bend with less resistance
Ergonomic Leg that has an angled design to fit in a forward firefighting position
H-back, padded suspenders with parachute pull
Comfort inseam in crotch reduces wear and stress on the liner
DexFlex™ Knee
OmniDex Cut
DexFlex™ Elbow
FX-R pants are available with an Internal Pant Harness and/or Egress System
See Page 21 for our emergency escape products
Log on to www.firewriter.net to Create your own Custom FX™ Gear
3
Fire-Dex Custom Assault™ Gear
Assault Gear is a full-custom gear line available with an array of options and
mobility features. When you know the materials that you need, what options
you want, and where you want them placed, Assault Gear allows you to order
the exact turnout you want to your specification at a competitive price.
Coat Features
Coats come standard in 28", 32", or 35" lengths (custom lengths available)
Patent pending removable Drag Rescue Device allows it to be
removed for cleaning reducing the possibility for damage
Variety of pocket options
Can be ordered with a DexFlex™ back and/or elbow for increased mobility
2 snaps to secure the liner to the hem of the outer shell
3M™ Scotchlite™ Reflective Material or Reflexite® Brilliance® in your choice of
color and configuration
Pant Features
Available in Low or Regular Rise
Option of no rear panel, 3" or 6" rear panel
Can be ordered with a DexFlex™ knee for increased mobility
Many suspender options
Log on to www.firewriter.net to
Create your own Custom Assault™ Gear
4
Fire-Dex Custom Proximity Gear
Quality construction continues throughout all Fire-Dex® products. Fire-Dex Proximity Gear uses
lock-stitch construction on all seams to ensure strong seams that won’t unravel if one stitch is
broken. Collars are made with four layers to ensure maximum protection about the neck area, and
cuffs and knees have reinforced stitching to improve the longevity and durability of the product.
Fire-Dex Proximity Gear is compliant to NFPA 1971, current edition, ensuring that your garment
provides the mandated comfort and safety requirements.
Features
Coats are available in Assault™ style in 28”, 32”, or 35” length, as well as in FX™ style
(custom length also available)
Pants are available in Assault™ style, with or without rear panel, as well as FX™ style, with
or without rear panel.
Outer shell available in 7 oz. aluminized PBI®/Kevlar® and 10 oz. aluminized armid twill.
Available with Crosstech® moisture barrier or Stedair® 3000.
Knees, elbows, and shoulders can be reinforced with shell material.
Cuffs can be reinforced with shell material, leather, or polymer coated aramid.
Most options available on Custom Assault Gear such as our wide variety of pockets, clips,
and other features are also available on Proximity Gear.
Also Available
Gloves (non-NFPA)
Helmet Covers (non-NFPA)
Log on to www.firewriter.net to
Create your own Custom Proximity Gear
5
Fire-Dex Custom Turnout Gear Options
Fire-Dex has pockets, rings, hooks and straps for every use. We’ve got the options you
want in sizes you need. Listed below are just a few of the options we have to offer.
XP01 - Patch Pocket
10"x 10"
XP11N/20N - Radio Pocket
With Notched Flap 9"x 3"x 2",
6"x 4"x 2"
XP25 - Hand Warmer
Pocket 8"x 9"
XP52 - Rear Patch Pocket
7.5"x 8" (Pants Only)
XP02/03Radio Pocket
(2 Cell) 7"x 3"x 2"
(3 Cell) 10"x 3"x 2"
XP04 - Spanner Wrench
Pocket With Leather
12"x 3"x 1"
XP05 - Glove Pocket
4"x 3"x 2"
XP10/11/12 - Radio Pocket
12"x 3"x 2", 9"x 3"x 2",
8"x 3"x 2"
XP11LA - Leather
Reinforcement
XP11RA - Arashield Reinforcement
XP14 - Mask Pocket With
Zipper 13"x7"x 5"
XP35 - Semi Bellows Cargo Pocket 10"x 10"x 2"
XP30CP - Full Bellows
Cargo Pocket 10" x10"x 2"
with 6 extra tool
compartments
XP32 - Semi-Bellows Hand
Warmer Pocket 8" x 9"x 2"
XP34-ComboSemi-Bellows/
HandWarmer 9"x 9"x 2"
(Available on Most Pockets)
XP30/31 - Full Bellows
Cargo Pocket 10"x10"x 2",
8"x 8"x 2"
XP70 - Split Bellows Cargo
Pocket 10"x 10"x 2"
6
(Available on Most Pockets)
XL50/56/57 - Letter
Patch SEWN to Coat
and DRD flap (shown)
XL61 - Hanging
Letter Patch
XL70/76/77 - Letter Patch
VELCRO to Coat
Fire-Dex Custom Turnout Gear Options
Select your options and build your custom gear online at www.firewriter.net. Build your
gear the way you want it with your choice of pockets, straps, rings and reinforcements.
XM04 - D-Ring on a Patch
XM06 - Personal Alarm/
Badge Holder 3"x4"
XM80 - Flashlight Hook
With Fabric Strap
XM85 - Survivor Flashlight
XMKB/BL - KEVLAR® Belt
and Shell Material
Belt Loops
XM45 - Zipper
Leg Closure
554-ReinforcedShoulder,
Shown in Grey Leather
561 - Reinforced Knee
(Shown in Gold Ara-Shield®)
569- Removable Padded
Knee-Shown in Gold
Ara-Shield®
DexFlex™ KneeEnhanced Mobility for
Crawling and Climbing
DexFlex™ ElbowEliminates Restriction
in Sleeve
Increased Range of Motion
Without Restriction
DexFlex™ Back-
SuperDex™ Knee Pad7-Layer Water-Resistant
Knee Pad
XMEFR - Nomex Flag
with stars facing right
(pictured)
XMEFL - stars facing left
also available
Holder With Fabric Strap
XM11/12 - Universal
Fabric Strap 1.5"x 5", 1"x 5"
XM86 - Survivor Flashlight
Holder With Clip
XMCLP - Mic Clip 1"x 2"
– Shell Material
XM03- 7" NOMEX®
Knitwrist with Thumbhole
XM50 - Liner-Out
Warning System
XM2E - Waterwell
Eyelets 1/Sleeve
7
Fire-Dex Express Gear™
Need it fast? Fire-Dex Express Gear is shipped in five business days or less
at no extra charge. Five models are available to best suit your needs
and budget – and all five models come in sizes small through 3X.
®
Fire-Dex proudly places our
shield on every set of turnout
gear we make. Our shield
represents the commitment
®
of every Fire-Dex associate to
customer satisfaction, providing
quality products made with
proven protection, durability
and comfort, and offering
responsive service and delivery.
Our shield stands for our Express
Gear, shipped in five business
days or less at no extra charge;
FireWriterTM, www.firewriter.net,
our exclusive online spec-writing
technology; and for unsurpassed
quality we build in to every
product made right here
in the USA.
Since 1983, we’ve been providing
the highest quality Protection for
the Heat of the Battle™.
NOMEX® IIIA
Assault Gear™
Assault Gear™
Coat & Pant: 35" coat with DRD and
a regular rise pant.
Coat & Pant: 32" coat with DRD and a
regular-rise pant with a 6” rear panel.
Outer shell: NOMEX® IIIA in yellow
or black.
Outer shell: NOMEX® IIIA in yellow
or black.
Thermal liner/moisture barrier
options: QT: Quilted NOMEX® batt
sewn to Stedair® 3000.
options: QT: Quilted NOMEX® batt
sewn to Stedair® 3000. AT: Quilted
Para-Aramid batt sewn to Stedair® 3000.
AX: Quilted Para-Aramid batt sewn to
CROSSTECH® on NOMEX® pajama check.
Trim pattern: 2" & 3" combination
trim on coat. 2" trim around pant
cuff. Yellow outer shell comes
with red/orange 3MTM ScotchliteTM
Reflective Material. Black outer
shell comes with 3MTM ScotchliteTM
Reflective Material lime/yellow.
Closure: Coat and Pant have inner
woven hook and loop/outer hook
& dee.
8
NOMEX® IIIA
Trim pattern: 2" & 3" combination
trim on coat. 2" trim around pant
cuff. Yellow outer shell comes
with red/orange 3MTM ScotchliteTM
Reflective Material. Black outer
shell comes with 3MTM ScotchliteTM
Reflective Material lime/yellow.
zipper/outer woven hook & loop.
5 Models Shipped in 5 Days or Less
Fire-Dex Express Gear™ is fast – and comfortable. Our three premium Express modelswith outer shells of NOMEX/KEVLAR®, P84, and PBI Matrix® - come standard with
our DexFlex™ comfort features. The DexFlex™ Back expands the range of reach and
stretch motions for maximum mobility. The DexFlex™ Knee enhances flexibility and
comfort while climbing and crawling.
NOMEX®/KEVLAR®
P84®/KEVLAR®
Assault Gear™
Assault Gear™
a low-rise pant with a standard 6"
rear panel.
a low-rise pant with a standard 6"
rear panel.
Outer shell: NOMEX®/KEVLAR®
in Khaki.
Outer shell: P84®/KEVLAR® in light
gold or dark gold
options: AT: Quilted Para-Aramid
batt sewn to Stedair® 3000. AX:
Quilted Para-Aramid batt sewn to
CROSSTECH® on NOMEX® pajama
check CX: Caldura® facecloth
quilted to Para Aramid batt sewn to
CROSSTECH® on NOMEX® pajama
check.
options: QT: Quilted NOMEX® batt sewn
to Stedair® 3000. AT: Quilted Aramid
batt sewn to Stedair® 3000. AX: Quilted
Aramid batt sewn to CROSSTECH®
coated on NOMEX® pajama check.
Trim pattern: 3" triple trim in NYC
pattern on coat. 3" triple trim
around pant cuff. Choose from 3MTM
ScotchliteTM Reflective Material in
lime/silver or red/silver.
around pant cuff. Choose from 3MTM
PBI Matrix®/
KEVLAR®
Assault Gear™
Coat & Pant: 32" jacket with DRD
and a low-rise pant with a standard
6" rear panel.
Outer shell: PBI Matrix®/KEVLAR®
in gold.
options: AT: Quilted Para-Aramid batt
sewn to Stedair® 3000. AX: Quilted
Para-AramidbattsewntoCROSSTECH®
on NOMEX® pajama check.
around pant cuff. Choose from 3M
9
Fire-Dex® Opportunity Gear
Opportunity Gear is value gear designed with the most popular options already in
place but still allows for some customization. In addtion to choosing from our most
popular fabrics you can also change pocket types, flashlight holders, reinforcement
material, as well as the trim pattern and trim type.
Standard Opportunity Gear
Coat: 35" coat with DRD
Pant: Regular rise pant with no rear panel
Pant: Regular rise pant with 6" rear panel
Outer shell: NOMEX® IIIA in black, red, tan, yellow, and white, or in Nomex®/
Kevlar® in gold, khaki, yellow, or black
Outer shell: NOMEX® IIIA in black, red, tan, yellow, and white, Nomex®/Kevlar® in
gold, khaki, yellow, or black, or PBI® Matrix in gold or black
Thermal liner/moisture barrier: Q8 sewn to Stedair® 3000
Thermal liner/moisture barrier: XtraLite and Stedair® 3000 (can be upgraded to
Caldura® and Stedair® 4000)
Trim pattern: 3M™ Scotchlite™ Reflective Material in 2" NFPA Standard Solid Trim
(Can be upgraded to 3" solid or 3" triple trim in any of our trim configurations)
Trim pattern: 3M™ Scotchlite™ Reflective Material in 3" NYC Triple Trim (can be
changed or upgraded to any of our trim configurations)
Closure: Jacket has inner woven hook & loop with outer hook & dee. Pants have
inner snap with outer hook & dee
Closure: Jacket has inner zipper with outer hook & loop. Pants have inner hook
& loop with outer hook & dee
Features: Mic clips, polymer coated Kevlar cuffs, shoulders, and knees, coat
patch pockets, radio pocket, and full bellow pant pockets (many feature
upgrades available)
Features: Mic clips, polymer coated Kevlar cuffs and knees, semi-bellow
handwarmer coat pockets, radio pocket, and full bellow pant pockets (many
feature upgrades available)
Sizing: Chest and waist sizes available in 2" increments. with custom sleeve
lengths and inseam.
Sizing: Chest and waist sizes available in 2" increments with custom sleeve
lengths and inseam.
*Can also be upgraded to a 32" coat with inner zipper/outer hook & loop closure,
or standard closure
10
Deluxe Opportunity Gear
Chieftain® 35M & 32X
When you need quality gear at a great price, Chieftain turnout gear is an
excellent choice. This value gear is designed with the most popular options
already in place and allows you to choose from our most popular fabrics in
an array of colors.
35M
32X
Pant: Regular rise pant with no rear panel
Pant: Regular rise pant with 6" rear panel
Outer shell: NOMEX® IIIA in black, red, tan, yellow, and white, or in Nomex®/
Kevlar® in gold, khaki, yellow, or black
Outer shell: NOMEX® IIIA in black, red, tan, yellow, and white, Nomex®/Kevlar® in
gold, khaki, yellow, or black, or PBI® Matrix in gold or black
Thermal liner/moisture barrier: Q8 sewn to Stedair® 3000
Thermal liner/moisture barrier: XtraLite and Stedair® 3000 (can be upgraded to
Caldura® and Stedair® 4000)
Trim pattern: 2" NFPA Standard Solid Trim (Can be upgraded to 3" NYC Triple Trim)
Closure: Jacket has inner woven hook & loop with outer hook & dee. Pants have
inner snap with outer hook & dee
Features: Mic clips, polymer coated Kevlar cuffs, shoulders, and knees, coat
patch pockets, radio pocket, and full bellow pant pockets
Sizing: Chest and waist sizes available in 4" increments with custom sleeve
lengths and inseam.
Trim pattern: 3M™ Scotchlite™ Reflective Material in 3" NYC Triple Trim
Closure: Jacket has inner zipper with outer hook & loop. Pants have inner hook
& loop with outer hook & dee
Features: Mic clips, polymer coated Kevlar cuffs and knees, semi-bellow
handwarmer coat pockets, radio pocket, and full bellow pant pockets
Sizing: Chest and waist sizes available in 4" increments. with custom sleeve
lengths and inseam.
*Can also be upgraded to a 32" coat with inner zipper/out hook & loop
closure(32MZ) or standard closure (32M)
11
Fire-Dex Extrication Gear
Fire-Dex® Extrication Gear is made with the same superior quality used to
manufacture our Fire-Dex® turnouts, EMS and other apparel. Available in a coverall or
separate coat and pant, choose Fire-Dex® Extrication Gear for your rescue operations.
Jacket
• 32” jacket
• Outer shell available in 6 oz. NOMEX® in yellow, navy, royal, or tan,
9 oz. FR cotton in red, tan, navy blue, yellow, or Tecasafe Hi-Visibility
in yellow (meets ANSI 107, Class III, jacket or pant alone meets Class II)
• Inner zipper / outer hook & loop closure
• 3MTM ScotchliteTM Reflective Material in 2” triple trim configuration around
the hem, across the back and around the cuffs (extra trim added on Hi Vis)
• Two combination semi-bellows / handwarmer pockets (9x9x2”)
• Multiple pockets: radio pocket, pinnacle pocket, pen/pencil pocket
• 14x7” shell material padded elbows
• Hook & loop adjusters on cuffs
• Throat strap
• Cotton lined sleeves
Pant
9 oz. FR cotton in red, tan, navy blue, yellow, or Tecasafe Hi-Visibility
in yellow (meets ANSI 107, Class III, jacket or pant alone meets Class II)
• Zipper with snap fly
• Seven belt loops
• 3MTM ScotchliteTM Reflective Material in 2” triple trim around the cuffs (extra
trim added on Hi Vis)
• Two semi-bellows pockets (10x10”)
• Scissors pocket on bellows pocket,right thigh
• 12” zipper on inseam of legs
• 19x8” shell material padded knees
• Two rear patch pockets
Coverall
9 oz. FR cotton in red, tan, navy blue, yellow, or Tecasafe Hi-Visibility in
yellow (meets ANSI 107, Class III)
• Zipper closure with top snap
• 3MTM ScotchliteTM Reflective Material in 2” triple trim configuration around the
cuffs, on the yoke and upper sleeve (extra trim added on Hi Vis)
• Pleated back with elastic gather at waist
• Multiple pockets: two angled front pockets, two pass-through pockets on front
of pants, two rear patch pockets, two mic clips, radio pocket , patch pocket, pinnacle pocket with scissors pocket, pen/pencil pocket, two 10x10x2” semi bellows
on thighs
• 12” zipper on inseam of legs
• 14x7” shell material padded elbows
• 19x8” shell material padded knees
• Cotton lined sleeves
12
Chieftain® Wildland
Chieftain Wildland Gear provides the protection you need on the fire line. A full
array of features provides placement for tools, items and more, and proven-quality
fabrics maximize safety and comfort. Compliant to NFPA 1977, current edition by
Underwriters Laboratories.
Standard Jacket
• 32” jacket
• Inner zipper/outer hook & loop closure
• Throat tab
• Two utility loops on pockets
• Two 10x10” pockets
• One 9x3x2” radio pocket, left chest
• Hook & loop glove holder
• Custom sleeve lengths available in even
2” increments
Standard Pants
• Two rear patch pockets with flaps
• Elastic on sides of waistband
• Belt loops
• Leather knee reinforcements
Standard Coverall
• Inner zipper/outer hook & loop
closure
• Throat tab
• Leather knee reinforcements
• One 9x3x2” radio pocket, left
chest
• Hook & loop utility loop on right chest
• Fabric take-up straps at cuff
Deluxe Jacket
• 32” jacket
• Inner zipper/outer hook & loop closure
• Throat tab
• Two utility loops on pockets
• Two 10x10” pockets
• Hook & loop glove holder
• 2” 3M™ Scotchlite™ Reflective Material
triple trim in lime/silver around sleeves,
chest, and back
• Custom sleeve lengths available in even 2”
increments
Deluxe Pants
• Two pass through pockets
• Two angled front pockets
• Two rear patch pockets with flaps
• Two full bellow cargo pockets
• 2” Scotchlite triple trim in lime/silver
• Elastic on sides of waistband
• Belt loops
• 10” gusseted outer zipper legs
• Outer shell knee reinforcement
with thermal padding
Deluxe Coverall
• Inner zipper/outer hook & loop
closure
• Throat tab
• Outer shell knee reinforcement with
thermal padding
• 2” Scotchlite™ triple trim in lime/
silver on leg cuffs and arms
• One breast pocket
• Mic clip on left chest
• Pass-through hand pockets
• Two full bellow pockets on legs
• Fabric take-up straps at cuff
13
Fire-Dex USAR Gear
Fire-Dex® understands the rigors of search and rescue operations. Fire-Dex®
USAR Gear provides the durability you need for a search and rescue scene, without
compromising comfort. Dual certified to both NFPA standards 1999 and 1951, our
USAR gear features the same proven quality found in all Fire-Dex® products, backed
by our unsurpassed service. When selecting search and rescue gear, ask for Fire-Dex®.
Jacket
• 29" or 33” jacket
• Outer shell available in 6.0 oz.NOMEX® in yellow, navy, royal or tan
– OR –
5.3 oz. Millenia® SR in gold
• Sewn-in CROSSTECH® S/R fabric
• 3MTM ScotchliteTM Reflective Material in 2” NFPA standard
configuration (triple trim)
• One radio pocket (9x3x2”), right chest
• One patch pocket (8x6”), left chest
• Hook & loop cuff adjusters
• Shell reinforced cuffs
Available with removable liner
Available with additional fleece liner
Pant
• Outer shell available in 6.0 oz.NOMEX® in yellow, navy, royal or tan
– OR –
5.3 oz. Millenia® SR in gold
• Sewn-in CROSSTECH® S/R fabric
• Elastic waist
• Two full bellows pockets (8x8x2”)
• 3MTM ScotchliteTM Reflective Material in 2” triple trim around cuffs
• 10 x 8” shell reinforced knees
• Shell reinforced cuffs
Available with removable liner
14
Para-Dex™ EMS Gear
Para-DexTM EMS Gear by Fire-Dex® provides the comfort, protection and mobility your
job demands. A choice of outer shells and a variety of options, allow you to customize
an ensemble that fits your needs. Fire-Dex® Para-DexTM EMS Apparel is certified as
compliant to NFPA 1999, current edition by Underwriters Laboratories, Inc.
Para-DexTM EMS Gear with CROSSTECH® EMS Fabric
CROSSTECH® Jacket
• 29” or 33” NOMEX® outer shell with sewn-in CROSSTECH® EMS fabric
• 6.0 oz. NOMEX® outer shell available in yellow, navy, royal or tan
• 3MTM ScotchliteTM Reflective Material in 2” NFPA standard configuration
• One radio pocket (9x3x2”), right chest
• One patch pocket (8x6”), left chest
• Hook & loop cuff adjusters
Optional fleece or nylon winter liners are available for all EMS jackets.
CROSSTECH® Pant
• NOMEX® outer shell with sewn-in CROSSTECH® EMS fabric
• 6.0 oz. NOMEX® outer shell available in yellow, navy, royal or tan
• Easy-on elastic waist
• Two full bellows pockets (8x8x2”)
• 15” outer zippers on legs
• 3MTM ScotchliteTM Reflective Material in 2” trim around cuffs
• Options include inner zipper/outer hook & loop closure and/or suspenders
Fire-Dex® Para-DexTM EMS Apparel is certified as compliant to NFPA 1999, current edition.
NOMEX is a registered trademark of DuPont and its affiliates. CROSSTECH is a registered
trademark of WL Gore and associates. 3M and Scotchlite are trademarks of The 3M Company.
15
Fire-Dex Leather Boots
Fire-Dex leather boots have been engineered to provide all of the protection of an
NFPA leather fire boot but with all the comforts of an athletic shoe.
Exterior
Sole
• Vibram® FIRE&ICE™ compound combines
heat resistance and slip resistance,
withstanding temperatures of up to 475ºF
for 40 minutes, while providing superior
traction in even the coldest, wettest
conditions
• Rugged diamond plated ladder shank
area increases traction when climbing
ladders
• Molded Cement Outsole with
Articulating Louvers provides additional
traction to the medial side of the foot
• Red no skid pattern helps reduce
slippage in wet conditions and releases
water from being trapped beneath the
outsole
Interior
• Pull-on loops are reinforced with extra layer of leather and
Kevlar® thread to guarantee them for the life of the boot
under normal wearing conditions™
• Quick to don and doff with gloved hand
• 2.2 mm silicone tanned FR Full grain, heavy weight leather
• Enhanced visibility with 3MTM ScotchliteTM Reflective
Material - 8935 Silver Industrial Wash Flame Resistant Fabric
• Vibram® FIRE&ICE™ heel guard promotes longevity, creates
and maintains shape of ergonomically designed heel cup
• Vibram® FIRE&ICE™ toe guard provides additional grip
where you need it and promotes longevity of toe cap
• Crosstech® Footwear Fabric provides durable, breathable protection
• Lined with 400g of Polyfelt, providing lightweight insulation
• 200g of Kevlar® by DuPont provides the most innovative thermal and cut resistant barrier
• Composite protective toe cap complies with NFPA/CSA/ANSI Specifications
Insole
• Multi density footbed
• Lenzi® puncture resistant fabric adds protection & enables more flexibility in the boot
• Impact-absorbing elastomer performance gel at heel and ball of the foot
• Antibacterial/anti-odor, moisture-wicking sock liner with Nano printing technology
promotes circulation to the foot and legs
• Energy Return Polyurethane that cushions and cradles the foot also reduces foot, leg &
back fatigue & provides proper body alignment
• EVA memory foam over time will take the shape of the foot creating a cradle effect for
perfect fit
16
Fire-Dex Rubber Boots
Fire-Dex rubber boots are high quality and value priced. This boot's features are
more than the standards. Everything in its design revolves around improving comfort,
durability, and safety.
Exterior
• Abraision-resistant Nitrile and rubber exterior with silicone coating
• Rubber shin guard
• Integrated pull-on loops
• Reflective trim around base
• Reinforced heel
• External, reflective size tag
Interior
• Moisture-wicking wool liner insulates against
heat and cold
•Protective Package made of corrosion-resistant
stainless steel incluldes:
• Puncture resistant mid sole that
covers the entire outside circumference
of the foot
• Steel shank for comfort and stability
when standing on ladder shanks
• Roomy steel toe
Insole
• Shoe fit design - fits more like a leather fire boot than
any other type of open shaft boots
• Contoured heel cup reduces heel slip
• Sock liner provides comfort to the foot, reducing foot,
leg and back fatigue
• Unique, custom-made foodbed
Sole
• Deep lug outsole with articulating louvers
• Diamond plate-textured midsole
• Tread designed to push water outward
• Sole attached with internal foxing, creating a clean-looking, more flexible, and
securely attached sole
• Black, one-piece lug sole with a wide platform heel for optimal stability
17
Fire-Dex Fire Gloves
In 1983 Fire-Dex got its start in the protective clothing market marking gloves. The HonorTM and CourageTM
Gloves were created as a tribute to firefighters who put their lives on the line. We are committed to quality and
make it a priority in all of our products! An array of leathers, thermal liners and moisture barriers, ensure the
highest levels of protection and comfort – compliant to NFPA standard 1971, current edition.
Fire-Dex Classics
Gold Elkskin
G01BLMGN:
Standard Fit, Crosstech® Glove
Insert, Nomex® Knit-Wrist
G01BLMGL:
Insert, Gauntlet Cuff
G03BLDDN:
TrueFit Cut, Crosstech® Direct Grip®
Glove Insert, Nomex® Knit-Wrist
G03BLDDL:
TrueFit Cut, Crosstech® Direct Grip®
Glove Insert, Gauntlet Cuff
Grey Cowhide
G01PLMGN
Standard Fit, Crosstech®
Glove Insert, Nomex®
Knit-Wrist
G01PLMGL
Standard Fit, Crosstech®
Glove Insert, Gauntlet Cuff
Honor™ and Courage™ Gloves
Fire-Dex® HonorTM Glove
The Fire-Dex Honor™ Glove features a durable
cow hide palm and a flexible elk skin back.
G01KEMGN:
Standard Fit, Nomex knitwrist, CROSSTECH® Glove
Insert
G01KEMGL:
Standard Fit, Gauntlet Cuff, CROSSTECH® Glove Inserts
G03KEDDN:
TrueFit Cut, Nomex knit wrist, CROSSTECH® DIRECT
GRIP® Glove Inserts
G03KEDDL: FDX G1
Blue Cowhide
G01BLMGN
Insert, Nomex® Knit-Wrist
G01BLMGL
Insert, Gauntlet Cuff
G03BLDDN
TrueFit Cut, Crosstech® Direct
Grip® Glove Insert, Nomex®
Knit-Wrist
G03BLDDL
TrueFit Cut, Crosstech® Direct
Grip® Glove Insert, Gauntlet
Cuff
Fire-Dex® CourageTM Glove
The Fire-Dex Courage™ Glove features a
lasered goat hide palm and elkhide back.
Goat’s best attribute is its ability to naturally
repel water, and as a result provides one of
the best materials for gloves.
G01GEMGL_SP:
Standard Fit, Gauntlet Cuff, CROSSTECH® Glove
Inserts
G01GEMGL_SP:
Standard Fit, Nomex knitwrist, CROSSTECH® Glove
Inserts
TrueFit Cut, Gauntlet Cuff, CROSSTECH® DIRECT
GRIP® Glove Inserts
SUPERIOR SAFETY
The only high dexterity glove that has a 60+ TPP and exceeds the
measurable scale in all tests
5 Layer Back - 2 layers of Kovenex-R®, 1 layer of breathable Pyrotect™
moisture barrier, 1 layer of reverse grain pig, and 1 layer of full grain
cowhide
Kevlar® stitching on leathers, Nomex® stitching on liner
Reverse sides of leather used for improved grip
SUPERIOR MOBILITY
Roll-over, seamless fingertips for better tactility
Pre-curved, ergonomically designed fingers
Keystone thumb design
SUPERIOR QUALITY
Full grain pigskin across on back of hand and fingers
Full grain cowhide on the palm and knuckle straps
Full grain goatskin on the palm and around fingers
Kovenex-R® Thermal
Available in Gauntlet Cuff or Knitwrist
18
Fire-Dex Helmets
Both the 911 Modern Helmet and the 1910 Traditional Helmet feature fiberglass compression molded shells
with superior flame and heat resistance, thermal impact cap, ratchet adjustment, adjustable headband to fit
all SCBA’s.
SEI Certified to meet or exceed NFPA 1971, 2007 edition.
The Fire-Dex® 911™
Available in Black, Yellow, Red, and White shells with either 4" or 6" shields, or with goggles.
Standard Features
Deluxe Features
Removable/replaceable, 2-Layer Black
Earlap with NOMEX® and FR Cotton
3M™ Scotchlite™ Relective Material in Solid Lime Yellow
Knit sweatband and nape
3M™ Scotchlite™ Relective Material Triple Trim Chevrons
Leather sweatband and nape
The Fire-Dex® 1910™
Available in Black, Yellow, Red, and White shells with a 4" shields, bourkes (flip-downs) & goggles, or goggles only.
Standard Features
Deluxe Features
3M™ Scotchlite™ Relective Material Solid Lime Yellow
Trapezoid Trim
Knit sweatband and nape
3M™ Scotchlite™ Relective Material Triple Trim Trapezoid
Leather sweatband and nape
19
Fire-Dex Hoods
Fire-Dex Fire Hoods provide maximum protection and comfort in the heat of the battle.
We use only the finest proven materials on the market to ensure your safety.
Flat lock hood seams and TrueFit™ elastic provide a secure fit second to none.
H37
H61
H71
H81
2-layer hood with long bibs and
shoulder contour. Complaint
to NFPA 1971, current edition.
Phoenix edition available with
extra large bib.
2-layer tube hood with
shoulder notch and bound
notch bottom. Complaint to
NFPA 1971, current edition.
XL model available for longer
hood length. Average length
13”. XL average length 20”.
2-layer seamless bib with
shoulder gusset. Compliant
Average length 14”.
2-layer long seamless bib with
notched shoulder. Compliant
Average length 15”.
Hood Material Options
CODE
OUTER LAYER
INNER LAYER
TPP*
CX
7 oz. CarbonX®
7 oz. CarbonX®
23.4
GL
6 oz. PBI® GOLD/ High Strength Aramid
8 oz. NOMEX®/Lenzing®
20.9
NE
8 oz. NOMEX® (100%)
8 oz. NOMEX® (100%)
24.6
NL
8 oz. NOMEX®/Lenzing®
8 oz. NOMEX®/Lenzing®(20/80)
23.8
PF
8 oz. P84®/Lenzing® (40/60)
8 oz. P84®/Lenzing® (40/60)
21.7
PL
6 oz. PBI®/Lenzing® (20/80) 8 oz. NOMEX®/Lenzing®
24.5
PS
6 oz. PBI®/Lenzing® (20/80)
22.7
* TPP is an approximate value of fabric before washing.
20
6 oz. PBI®/Lenzing® (20/80)
Accessories
Fire-Dex suspenders and gear bags are made with the same quality construction methods as our turnout gear,
gloves and hoods. Our durable suspenders and gear bags are made to withstand the rigors of the fire ground.
Fire-Dex is also proud to offer a full line of emergency egress and descent products. These products can be
purchased together as a complete egress system, or individually.
Black Padded
H-Back Suspenders
Black H-Back Suspenders are
available for all Fire-Dex gear
styles and feature 8-button,
metal clip ends, and 2" black
padded non-stretch cotton
webbing with parachute pull
D-ring take up straps.
H-Back Suspenders
H-Back Suspenders are
available for most Fire-Dex
turnout gear styles and
feature 8-button, leather
ends, and 2" non-stretch
red cotton webbing.
Elastic or reflective trim
are also available.
X-Back Suspenders
X-Back Suspenders are
available with pants
without rear panels and
feature 8-button, leather
ends, and 2" non-stretch
red cotton webbing.
Elastic or reflective trim
are also available.
Sewn-In Suspenders
Sewn-in suspenders are
available for all Fire-Dex
gear styles and feature red
non-stretch cotton webbing
and thermoplastic buckles
and slides.
*Available with Cyberian Cam Lock
*Available with Cyberian Cam Lock
Large Gear Bag B05 Model
25.5" x 21"x15"
Red Cordura® Nylon
Firefigting Gear Stencil or
Maltese Cross Stencil
Internal Pant Harness
The Fire-Dex Internal Pant Harnes (IPH)
is installed between the outer shell and
inner liner of the pant so that it is always
there when you need it. It is available
for installation in our FX-R pants.
The Fire-Dex Integrated Harness
Personal Rescue System won the
2009 Award of Excellence for Best Life
Safety Innovation by Fire Apparatus &
Emergency Equipment.
Step-In Bag B03 Model
16"x16"x 20"
Red Cordura® Nylon
Organizer Bag B02 Model
25.5" x 14" x 16"
Red Cordura® Nylon
XPEG Egress Pockets
Fire-Dex has engineered multiple
Egress Pockets for the FX-R pant to
hold descending devices for the fastest
deployment possible.
XPEG (shown) - Best for use with the RIT
A.L.2 descent device.
XPEG PEX - Best for use with the Sterling F4
or PETZL EXO descent devices.
Cyberian Cam Lock
Available on any quick-adjust
suspender, the Cyberian Cam
Lock is a heavy-duty, thermoplastic suspender buckle
with a cam mechanism that
opens to allow for length
adjustment then closes to
lock that position firmly in
place to eliminate slippage.
B01 Model
24" x 13"x 14"
Red or Blue Cordura® Nylon
Firefigting Gear Stencil or
Hazmat Equipment Stencil
Harness Straps
Fire-Dex offers 3 configurations of harness
straps to fit most external harnesses and
are available on all custom Fire-Dex pants.
XMHS-5 - 5 straps for Class 1 harnesses
XMHS-6 - 6 straps for most generic harnesses
XMHS-7 - 7 straps for either left or rightopening Gemtor harnesses
XPEG FLA - For use with any descent device.
21
Fire-Dex Technology at Work
Fire-Dex® strives to offer the highest quality products and services through an
environment of continuous improvement and innovative technologies. The
Fire-Dex® Technology Lab is an on-site fabric-testing laboratory where fabrics and
material combinations can be tested against NFPA standards in-house.
FireWriterTM, our online spec-writing program, allows you to create or update your
own turnout gear in minutes.
Our website, www.firedex.com, has a new face – now with more product and
industry information than ever before.
Fire-Dex Technology Lab
The Fire-Dex® Technology Lab tests materials and
product ensembles to continually promote product
improvement and innovation. Our Technology
Lab rigorously tests fabrics, seams and ensembles
to ensure compliance to NFPA standards and to
explore new technologies on the market.
Create your custom turnout gear online at www.firewriter.net.
Build your turnout gear from the bottom up and see your choices as
they are made. Choose a style, an outer shell and liners – and then
select from hundreds of pocket, reinforcement and miscellaneous
options. Place your lettering, and see how it will appear on a turnout
jacket.
22
www.firedex.com
Our new website is your source for information on Fire-Dex products, news, and training.
Click on Products for a complete listing of
our product lines and technical information.
Our News & Discussion area will take you to our
Discussion Board where you can stay up-to-date with
Fire-Dex news, read up and watch videos on training
topics and newsworthy info, and join in discussions.
Go to
Cleaning
and Repair
to take any
of our NFPA
1851courses
and get your
Fire-Dex
certification.
Our trainings include Routine Gear Cleaning, Routine Gear
Inspection, Advanced Gear Cleaning and Decontamination,
Advanced Gear Inspection, Gear Repair Training, and a
Complete Liner Inspection Training.
23
D I S T R I B U T E D
B Y
780 South Progress Drive, Medina, Ohio 44256
PHONE: ( 330 ) 723-0000
Fax: ( 330 ) 723-0035
Email: info@firedex.com Web: www.firedex.com
Fire-Dex Turnout Gear meets or exceeds NFPA 1971: Standard on Protective Ensemble for Structural Fire Fighting, current edition.
Fire-Dex®, Fire Writer™, TrueFit™, Defendex™, Assault Gear™ and Para-Dex® are trademarks of Fire Dex, LLC. CROSSTECH®, DIRECT GRIP®, CROSSTECH EMS® are registered
trademarks of W.L. Gore. Caldura®, Millenia® and Ara-shield® are registered trademarks of Southern Mills. NOMEX®, KEVLAR® and E89® are registered trademarks of EI
DuPont Nemours and company or its affiliates. PBI® and PBI Matrix® are registered trademarks of PBI Performance Products. Basofil® is a registered trademark of Basofil
LLC. 3M and Scotchlite are trademarks of 3M. P84® is a trademark of Inspec GmbH. Stedair® is a registered trademark of Stedfast, Inc.
© 2011 Fire-Dex LLC. Details and specifications are subject to change without notice. 03/11
PHONE: (330) 723-0000 Fax: (330) 723-0035 Email: info@firedex.com Web: www.firedex.com

One Brand Head to Toe - IPP

Transcription

Similar documents

Filtes depliant sewing thread@1-2

UltraMotion Turnout Gear

specification sheet - Protective Industrial Products

CWU-45/P Flight Jacket Valley Apparel

Mechanics, industrial/factory workers, dry cleaners, etc. can safely

CWU-36/P Flight Jacket Valley Apparel

1 2 3 4 AB Air dynamics

EuroSport - Composite

One Brand Head to Toe - X

XGames.ESPN.go.com

Ricochet Manufacturing Company Inc. Catalog 2015 www.Ricochet