Product List April 2011 Eng LoRes

Transcription

APRIL 2011
AUSTRALIAN PRODUCT LIST
As from December 2010 is in force a new European standard, named (IEC/EN) 61000-3-12,
which regulates the maximum levels of harmonic distortion produced by electrical equipment directly connected to the public low
voltage electric distribution network (it concerns the power sources having a current of
16A to 75A each phase). It does not concern
the power sources connected to private distribution cabins.
So the 61000-3-12 standard regulates this aspect by fixing limits that the manufacturers
should comply with.
In order to reduce and/or eliminate the harmonic distortion, Cebora has implemented
different technical solutions, such as the PFC
(Power Factor Correction) electronic devices.
The respect of such limits and a devoted manufacturing technology make it possible a lower electrical input by the power sources (particularly the single phase ones). This thanks to
the fact that the electrical input from the low
voltage public network happens by following
the sinusoidal wave form, thus avoiding waste
of energy and reflecting in a money saving for
the user.
Cebora has managed, in accordance with the
EN 61000-3-12 standard, to update its whole
product range, thus offering to all our customers products strictly in compliance with
the standard, technologically advanced and
energy saving oriented for respecting the environment.
Non complying power source
Complying power source
mains voltage
power source input
mains voltage
power source input
Logo of compliance with the
IEC/EN 61000-3-12- standard
affixed on the CEBORA power
sources
2
2011 - APRIL
PRICES AND SPECS MAY CHANGE WITHOUT PRIOR NOTICE
Ph: 1800 CEBORA; 1800 232 672, www.cebora.com
CONTENTS
PLASMA PROF
Page
PLASMA INVERTER
Page
TORCH PLASMA / PLASMA TORCHES
Page
TIG INVERTER D.C.
Page
TIG INVERTER A.C-D.C.
Page
TORCH TIG/ TIG TORCHES
Page
POWER ROD MMA INVERTER
Page
SOUND MMA INVERTER
Page
EVO SYNERGIC
Page
EVO SYNERGIC TS
Page
TRI STAR
Page
SOUND MIG STAR - synergic
Page
SOUND MIG STAR synergic Pulse/Double Pulse
Page
TORCH MIG/MIG TORCHES
Page
SPOOL GUN
Page
PUSH PULL - Water Cooled
Page
SPOTTER
Page
5
7
10
27
31
36
37
40
42
45
47
48
49
58
61
62
64
we reserve the right to modify
2011 - APRIL
3
PLASMA PROF 123 acc
“CHOPPER” multi-voltage PLASMA CUTTING POWER SOURCE. HIGH FREQUENCY IGNITION.
Art.
956
Specifications
415V 50/60 Hz
± 10%
Three phase input
S
220-230 V
50 A
Fuse rating (slow blow)
400-415/440 V 30 A
21 KVA 60%
16 KVA 100%
Input power
20A ÷ 120A
Current adjustment range
120A 60%
95A 100%
Duty Cycle (10 min.40°C)
According to IEC 60974.1
ELECTRONIC
Stepless regulation
35-40-(45) mm
1”1/4-1”2/3-(1”3/4)
Thickness on steel: Recommended- Max.-(Severance)
6m (18 ft.)
Torch length
220 lt/min - 5 bar
Air consumption
IP 21 S
Protection class
120Kg
Weight
465x720x965H
Dimensions mm
ART.
DESCRIPTION
956
Plasma cutting “Chopper” multi-voltage type power source. Comes with CEBORA CP161 MAR 6 m. hand torch, art. 1230, with
work return lead (6 m - 25 mm2) with clamp.
Complies with EN 61000-3-12.
1230
CEBORA CP161 MAR hand torch with central adaptor.
6 m. long (18 ft.).
1230.20
12 m. long (36 ft.).
1231
CEBORA CP161 DAR torch for profile machine with central adaptor. 6 m. long (18 ft.). Shielded.
1231.20
407
Wheeled compasses for CEBORA CP161 MAR hand torches artt. 1230 and 1230.20.
406
Wheeled torch holder. For art. 407.
4
PROFESSIONAL
2011 - APRIL
PLASMA PROF 163 acc
“CHOPPER” multi-voltage PLASMA CUTTING POWER SOURCE. HIGH FREQUENCY IGNITION.
Art.
S
957
Specifications
415V 50/60 Hz
± 10%
Three phase input
220/230V80A
400/415/440V 40A
27 KVA 40%
22 KVA 60%
16 KVA 100%
Input power
20A ÷ 160A
160A 40%
120A 60%
95A 100%
ELECTRONIC
Stepless regulation
40-45-(50)mm
1”2/3-1”3/4-(2”)
220 lt/min - 5 bar
Air consumption
IP 21 S
Protection class
140Kg
Weight
465x720x965H
Dimensions mm
ART.
DESCRIPTION
957
Plasma cutting “Chopper” multi-voltage power source. Comes with work return lead (6 m - 25 mm2) with clamp.
Without torch.
1230
6 m. long (18 ft.).
1230.20
12 m. long (36 ft.).
1231
CEBORA CP161 DAR torch for profile machine with central adaptor. 6 m. long (18 ft.).
Shielded.To be compulsorily coupled with Art. 108.
1231.20
CEBORA CP161 DAR torch for profile machine with central adaptor. 12 m. long (36 ft.).
Shielded.To be compulsorily coupled with Art. 108.
108
Analog interface for pantographs.
481
Ignition unit HV 14 for use with pantographs.
1229
CEBORA CP161 DAR torch for profile machine with central adaptor. 4 m long (12 ft.). Shielded. For HV 14. unit (art. 481). To be
compulsorily coupled with Art. 108.
1160
12 m. extension lead between power source (art. 957) and HV 14 unit (art. 481).
1160.10
18 m. extension lead between power source (art. 957) and HV 14 unit (art. 481).
407
Wheeled compasses for CEBORA CP161 MAR hand torches art. 1230 and 1230.20.
406
Wheeled torch holder for CEBORA CP161 MAR hand torches art. 1230 and 1230.20.
N.B. Orders for power source only, without
torch, will not be accepted.
2011 - APRIL
PROFESSIONAL
5
power PLASMA 3035/M
INVERTER PLASMA CUTTING POWER SOURCE. HIGH FREQUENCY IGNITION.
Art.
279
Specifications
240V 50/60 Hz
+ 15% / -20%
Single phase input
32 A 16 A
(115 V) (230 V)
3.5 KVA 35%
2.8 KVA 60%
2.4 KVA 100%
Input power
5A ÷ 30A
30A 25A 22A Duty Cycle (10 min.40°C)
35%
60%
100%
S
ARC CONTROL
ELECTRONIC
Stepless regulation
8-12 (15) mm
1/3”-1/2” (5/8”)
4m (13 ft.)
Torch length
60 lt/min - 3,5 bar
Air consumption
IP 23 S
Protection class
13Kg
Weight
175x503x400H
Dimensions mm
The power source can be powered by motor generators of adequate power (Min. 6 KVA).
ART.
DESCRIPTION
279
Inverter plasma cutting power source. Comes with CEBORA CP40 4 m. hand torch, art. 1208 with work return lead (4 m - 10
mm2) with clamp.
279.01
Inverter plasma cutting power source. Comes with CEBORA CP40 DAR torch for profile machine 6 m, art. 1207 with work return
lead (4 m - 10 mm2) with clamp.
1208
CEBORA CP40 MAR hand torch with direct connection.
4 m lenght (13 ft.).
1207
CEBORA CP40 DAR torch for profile machine with direct connection. 6 m lenght (18 ft.).
1207.20
CEBORA CP40 DAR torch for profile machine with direct connection. 12 m lenght (36 ft.).
196
Interface for use with pantographs:
Start/Arc - On/Arc - Arc/Voltage.
1432
Trolley for transportation of the power source only.
162
Wheeled compasses for hand torch.
157
Wheeled torch holder. For art.162
6
PROFESSIONAL
2011 - APRIL
PLASMA SOUND PC 6061/T
INVERTER MULTI-VOLTAGE PLASMA CUTTING power source. HIGH FREQUENCY IGNITION.
Art.
S
359
Specifications
415V 50/60 Hz
± 10%
Three phase input
10 A
7.6 KVA 60%
6.3 KVA 100%
Input power
20A ÷ 60A
60A 60%
50A 100%
ELECTRONIC
Stepless regulation
20-25 (30) mm
7/8”-1” (1”-1/8”)
6m (18 ft.)
Torch length
130 lt/min - 5 bar
Air consumption
IP 23 S
Protection class
26 Kg
Weight
286x515x406H
Dimensions mm.
ARC CONTROL
The power source can be powered by motor generators.
ART.
DESCRIPTION
359
Inverter multi-voltage plasma cutting power source. Comes with CEBORA CP101 MAR 6 m. hand torch, art. 1220 with work
return lead (6 m - 16 mm2) with clamp.
1220
1220.20
1231
To be compulsorily coupled with Art. 196.
1231.20
196
Interface for use with pantograhs:
1432
163
Wheeled compasses for CEBORA CP101 MAR hand torches art. 1220 and 1220.20.
153
Wheeled torch holder for CEBORA CP101 MAR hand torches art. 1220 and 1220.20.
2011 - APRIL
PROFESSIONAL
7
PLASMA SOUND PC 10051/T
INVERTER MULTI-VOLTAGE PLASMA CUTTING power source. HIGH FREQUENCY IGNITION.
Art.
S
361
Specifications
415V 50/60 Hz
± 10%
Three phase input
20 A
16.5 KVA 5 0%
15.7 KVA 60%
14.0 KVA 100%
Input power
20A ÷ 100A
100A 50%
95A 60%
85A 100%
ELECTRONIC
Stepless regulation
30-35 (40) mm
1”1/8”-1”1/4”
(1”-2/3”)
6m (18 ft.)
Torch length
220 lt/min
5 bar
Air consumption
IP 23 S
Protection class
34 Kg
Weight
297x504x558H
Dimensions mm
ARC CONTROL
ART.
DESCRIPTION
361
Inverter multivoltage plasma cutting power source. Comes with CEBORA CP161 MAR 6 m. hand torch, art. 1230 with work
return lead (6 m - 25 mm2) with clamp.
1230
1230.20
1231
1231.20
196
Interface for use with pantographs:
1670
Wheels kit for transportation of the power source only.
407
Wheeled compasses for CEBORA CP161 MAR hand torches artt. 1230 and 1230.20.
406
Wheeled torch holder for CEBORA CP161 MAR hand torches artt. 1230 and 1230.20.
8
PROFESSIONAL
2011 - APRIL
The CP marking
The registered CP marking identifies original Cebora consumable parts for plasma power sources.
Cebora strongly recommends using original CP consumable parts, since they are the only ones capable of ensuring the stated performance for the power source-torch combination.
The shape and choice of the materials used in CP consumables are decided when engineering the power source and torch, and represent the best compromise between performance, reliability and life-span of the part, all in full observance of the cogent standard
IEC 60974-7.
Special care is dedicated to observing working tolerances on the consumable; working beyond tolerance (especially alignment, coaxial, and surface finish tolerances):
- reduces the life-span of the consumable
- may produce overheating inside the torch, causing permanent damage
- worsens the cutting quality and increases the cost of restoring tooled parts.
The use of non-original parts may also cause:
- overheating of the power source
- electronic circuit breakage
- short-circuits in a process that uses voltages greater than 250 V D.C.
Cebora shall therefore not be liable in case of accident, and all warranties on machine and torch shall become void. Thus any savings
in purchasing non-original consumable materials is merely apparent, since it leads to inefficiencies in the production process as well as
voiding all warranties and relieving Cebora of any liability regarding the power source and torch: demand original Cebora consumables
with CP marking.
2011 - APRIL
9
CP 40 - Art. 1207 - 1207.20 - 1208
genuine cebora plasma cutting torch HIGH FREQUENCY ignition.
Patented
MAR
ART.
DAR
DESCRIPTION
per/for Art.
1208
CEBORA CP40 MAR hand torch with direct connection. 4 m. long (12 ft.).
279
1207
CEBORA CP40 DAR torch for profile machine with direct connection. 6 m. long (18 ft.).
279 - 279.01
1207.20
CEBORA CP40 DAR torch for profile machine with direct connection. 12 m. long (36 ft.).
279 - 279.01
10
PROFESSIONAL
2011 - APRIL
CP 40 - Art. 1207 - 1207.20 - 1208
accessories and consumables
Art. 1359
Art. 1347
Art. 1516
ART.
Art. 1507
Art. 1290
Art. 1900
DESCRIPTION
per/for Art.
1359
Body for hand torches.
1208
1347
Body for torches for profile machine.
1207 - 1207.20
1290
ø 0,7 mm nozzles (5 pcs).
1207 - 1207.20
1208
1516
Electrodes (5 pcs).
1207 - 1207.20
1208
1507
Swirl rings (2 pcs).
1207 - 1207.20
1208
1900
Nozzle holder.
1207 - 1207.20
1208
162
Wheeled compasses for CP 40 MAR hand torch Art. 1208.
1208
157
Wheeled torch holder. For art. 162.
1208
2011 - APRIL
PROFESSIONAL
11
CP 101 - Art. 1220 - 1220.20
Patented
MAR
ART.
1220
DESCRIPTION
per/for Art.
CEBORA CP101 MAR hand torch with central adaptor. 6 m. long (18 ft.).
355 - 359
1220.20 CEBORA CP101 MAR hand torch with central adaptor. 12 m. long (36 ft.).
12
PROFESSIONAL
355 - 359
2011 - APRIL
CP 101 - Art. 1220 - 1220.20
Art. 1911
Art. 1146
Art. 1877
ART.
Art. 1958
Art. 1765
Art. 1404
DESCRIPTION
per/for Art.
1146
1220 - 1220.20
1765
ø1,2 mm nozzles (5 pcs). Can be used btw. 20 and 60 Amp.
1220 - 1220.20
1877
Electrodes (5 pcs).
1220 - 1220.20
1958
Swirl ring (2 pcs).
1220 - 1220.20
1911
Nozzle holder.
1220 - 1220.20
1404
Spacing bushes with 2 points (3 pcs)
1220 - 1220.20
163
Wheeled compasses for CP101 MAR hand torches art. 1220.
1220 - 1220.20
153
Wheeled torch holder for CP101 MAR hand torches art. 1220.
1220 - 1220.20
2011 - APRIL
PROFESSIONAL
13
CP 161 - Art. 1229-1230-1230.20-1231-1231.20
Patent
Pending
MAR
ART.
DAR
DESCRIPTION
per/for Art.
1229
CEBORA CP161 DAR torch for profile machine with central adaptor.
4 mt. long (12 ft.). Shielded.
For HV 14 unit (art. 481).
957
1230
357 - 361 - 946
952 - 956 - 957
1230.20
357 - 361 - 946
952 - 956 - 957
1231
6 m. long (18 ft.). Shielded.
355-357-359-361 .(A) *
952 ...................... (B) *
957 ...................... (C) *
946 - 956
1231.20
12 m. long (36 ft.). Shielded.
355-357-359-361 .(A) *
952 ...................... (B) *
957 ...................... (C) *
946 - 956
* To be compulsorily coupled with interface:
(A) Art. 196 for Art. 355-357-359-361
(B) Art. 197 for Art. 952
(C) Art. 108 for Art. 957
14
PROFESSIONAL
2011 - APRIL
CP 161 MAR - Art. 1230 - 1230.20
accessories and consumables for manual cutting
Shield
Nozzle
Swirl ring
Electrode
Spacer
Nozzle holder
Torch body
Handle
60 A
Art. 1760
100 A
Art. 1398
Art. 1620
Art. 1761
120 A
Art. 1619
Art. 1970
Art. 1988
Art. 1876
Art. 1904
Art. 1144
Art. 1762
160 A
Art. 1701
Art. 1941
Art. 1763
ART.
DESCRIPTION
per/for Art.
1144
1230 - 1230.20
1941
Handle assy
1230 - 1230.20
1398
"O-Rings" (5 pcs)
1230 - 1230.20
1760
1763
ø1.2 mm nozzles (5 pcs).
Can be used btw. 20 and 60 Amp.
1988
Shield.
1230 - 1230.20
1876
Electrodes (5 pcs).
1230 - 1230.20
1904
Nozzle holder.
1230 - 1230.20
1970
Swirl-Ring.
1230 - 1230.20
1619
Brass cooling pipe (5 pcs)
1230 - 1230.20
1620
Spacing springs (5 pcs)
1230 - 1230.20
1701
1230 - 1230.20
407
Wheeled compasses for hand torches.
1230 - 1230.20
406
Wheeled torch holder.
1230 - 1230.20
1761
1762
2011 - APRIL
1230 - 1230.20
1230 - 1230.20
1230 - 1230.20
1230 - 1230.20
PROFESSIONAL
15
CP 161 MAR - Art. 1230 - 1230.20
accessories and consumables for contact cutting
Nozzle
Swirl ring
Electrode
Nozzle holder
Torch body
Handle
Art. 1398
45 A
Art. 1619
Art. 1760
Art. 1970
Art. 1876
Art. 1904
Art. 1144
Art. 1941
DESCRIPTION
per/for Art.
1144
1230 - 1230.20
1941
Handle assy
1230 - 1230.20
1398
"O-Rings" (5 pcs)
1230 - 1230.20
1760
1876
Electrodes (5 pcs).
1904
Nozzle holder.
1230 - 1230.20
1970
Swirl-Ring.
1230 - 1230.20
1619
1230 - 1230.20
ART.
16
1230 - 1230.20
1230 - 1230.20
PROFESSIONAL
2011 - APRIL
CP 161 MAR - Art. 1230 - 1230.20
accessories and consumables for gouging
Shield
Nozzle
Swirl ring
Electrode
Nozzle holder
Torch body
Handle
Art. 1398
60/120 A
Art. 1619
Art. 1988
Art. 1764
Art. 1970
Art. 1876
Art. 1904
Art. 1144
Art. 1941
ART.
DESCRIPTION
per/for Art.
1144
1230 - 1230.20
1941
Handle assy
1230 - 1230.20
1398
"O-Rings" (5 pcs)
1230 - 1230.20
1764
ø3 mm nozzles (5 pcs).
For gouging.
1230 - 1230.20
1988
Shield.
1230 - 1230.20
1876
Electrodes (5 pcs).
1230 - 1230.20
1904
Nozzle holder.
1230 - 1230.20
1970
Swirl-Ring.
1230 - 1230.20
1619
1230 - 1230.20
2011 - APRIL
PROFESSIONAL
17
CP 161 DAR - Art. 1229 - 1231 - 1231.20
accessories and consumables for automated cutting
Nozzle
Shield
Swirl ring
Electrode
Nozzle holder
Torch body
60 A
Art. 1619
Art. 1760
Art. 1398
100 A
Art. 1761
120 A
Art. 1970
Art. 1989
Art. 1876
Art. 1904
Art. 1145
Art. 1762
160 A
Art. 1763
ART.
DESCRIPTION
per/for Art.
1145
1229 - 1231
1231.20
1398
"O-Rings" (5 pcs)
1229 - 1231
1231.20
1760
1229 - 1231
1231.20
1761
1229 - 1231
1231.20
1762
1229 - 1231
1231.20
1763
1229 - 1231
1231.20
1989
Shield.
1229 - 1231
1231.20
1876
Electrodes (5 pcs).
1229 - 1231
1231.20
1904
Nozzle holder.
1229 - 1231
1231.20
1970
Swirl-Ring.
1229 - 1231
1231.20
1619
1229 - 1231
1231.20
18
PROFESSIONAL
2011 - APRIL
P 70 - Art. 1573-1573.20-1566-1566.20-1564-1563
Patented
Art. 1351
Art. 5710171
Art. 1510
Art. 1402
ART.
Art. 1368
Art. 1396
Art. 1308
Art. 1395
Art. 1394
DESCRIPTION
per/for Art.
1351*
1564 - 1573
1356**
Handgrip with push button.
1564 - 1573
1402
Electrodes (5 pcs).
1563 - 1564
1573 - 1566
1396**
ø1,0 mm “long life” nozzles (5 pcs).
1563 - 1564
1573 - 1566
1308
ø1,2 mm nozzles (5 pcs).
1563 - 1564
1573 - 1566
1368
Long electrodes (5 pcs).
1563 - 1564
1573 - 1566
1395**
ø1,0 mm “long life” long nozzles (5 pcs).
1563 - 1564
1573 - 1566
1510**
Swirl ring (2 pcs).
1563 - 1564
1573 - 1566
5710171
Nozzle holder.
1563 - 1564
1573 - 1566
1394
Spacing springs (5 pcs)
1564 - 1573
* This torch body (head) can replace the body art. 1352-P50
**These parts can also be used with CEBORA P50 TORCHES
2011 - APRIL
PROFESSIONAL
19
CP 95 C - Art. 1212
genuine cebora plasma cutting torch. without HIGH FREQUENCY ignition.
Patented
MAR
ART.
1212
20
DESCRIPTION
per/for Art.
CEBORA CP95 C MAR hand torch with direct connection. 6 m. long (18 ft.).
961
PROFESSIONAL
2011 - APRIL
CP 95 C - Art. 1212
Patented
Art. 1346
Art. 1513
Art. 1388
ART.
Art. 1851
Art. 1907
DESCRIPTION
per/for Art.
1346
1212
1388
1851
Electrodes (5 pcs).
ø1,1 mm long nozzles (10 pcs).
1513
1212
1907
Nozzle holder.
1212
163
Wheeled compasses for CP95 MAR hand torches art. 1212.
1212
153
Wheeled torch holder for CP95 MAR hand torches art. 1212.
1212
2011 - APRIL
1212
1212
PROFESSIONAL
21
CP 91 - Art. 1214 - 1214.20 - 1215
CP 90 - 1218.50 -1218.90
Patented
MAR
ART.
DAR
DESCRIPTION
per/for Art.
1214
CEBORA CP91 MAR hand torch with central adaptor. 6 mt. length (18 ft.).
947
1214.20
CEBORA CP91 MAR hand torch with central adaptor. 12 mt. length (36 ft.).
947
1215
CEBORA CP91 MAR hand torch with direct connection 6 m. long (18 ft.)
965
1218.50
CEBORA CP90 DAR torch for profile machine with central adaptor. 6 mt. length (18 ft.). Shielded.
947
1218.90
CEBORA CP90 DAR torch for profile machine with central adaptor. 12 mt. length (36 ft.). Shielded.
947
22
PROFESSIONAL
2011 - APRIL
CP 91 - Art. 1214 - 1214.20 - 1215
CP 90 - 1218.50 -1218.90
Art. 1358
Art. 1510
Art. 1907
Art. 1348
ART.
Art. 1847-1848-1849
Art. 1368
Art. 1404
DESCRIPTION
per/for Art.
1358
1214-1214.20-1215
1348
1218.50-1218.90
1847
ø1 mm long nozzles (10 pcs). For contact cutting. Can be used btw. 20 and 50 Amp.
1214-1214.20-1215
1848
1214-1214.20-1215
1218.50-1218.90
1849
1214-1214.20-1215
1218.50-1218.90
1368
Long electrodes (5 pcs).
1214-1214.20-1215
1218.50-1218.90
1510
1214-1214.20-1215
1218.50-1218.90
1907
Nozzle holder with protection.
1214-1214.20-1215
1218.50-1218.90
1404
1214-1214.20-1215
163
Wheeled compasses for CP91 MAR hand torches.
1214-1214.20-1215
153
Wheeled torch holder for CP91 MAR hand torches.
1214-1214.20-1215
2011 - APRIL
PROFESSIONAL
23
CP 200 - Art. 1232-1232.10 -1234-1234.10-1235
genuine cebora plasma cutting torch HIGH FREQUENCY ignition. water cooled.
Patented
MAC
ART.
DAC
DESCRIPTION
per/for Art.
1232
CEBORA CP200 MAC hand torch with central adaptor. 6 m. long (18 ft.). Water cooled.
952
1232.10
CEBORA CP200 MAC hand torch with central adaptor. 9 m. long (27 ft.). Water cooled.
952
1234
CEBORA CP200 DAC torch for profile machine with central adaptor. 6 m. long (18 ft.). Water cooled.
Shielded.
952
1234.10
Shielded.
952
1235
Shielded.
For HV16 unit (Art. 482).
952
24
PROFESSIONAL
2011 - APRIL
CP 200 - Art. 1232-1232.10 -1234-1234.10-1235
Art. 1355
Art. 1905
Art. 1367
Art. 1508
Art. 1842-1843
Art. 1844-1845
Art. 1416
Art. 1386
Art. 1357
ART.
DESCRIPTION
per/for Art.
1355
1232-1232.10
1357
1234-1234.10-1235
1842
1232-1232.10
1234-1234.10-1235
1843
1232-1232.10
1234-1234.10-1235
1844
1232-1232.10
1234-1234.10-1235
1845
1232-1232.10
1234-1234.10-1235
1367
Electrodes (10 pcs).
1232-1232.10
1234-1234.10-1235
1905
Nozzle holder.
1232-1232.10
1234-1234.10-1235
1386
Spacing springs (5 pcs).
1232-1232.10
1416
1232-1232.10
1508
Extractor for electrode.
1232-1232.10
1234-1234.10-1235
1397
Stainless steel diffuser (5 pcs)
1232-1232.10
1234-1234.10-1235
164
1232-1232.10
156
1232-1232.10
2011 - APRIL
PROFESSIONAL
25
CP 160 - Art. 1226-1226.20 -1228-1228.20
Patented
Art. 1353
Art. 1902
Art. 1398
Art. 1509
Art. 1378
Art. 1377
Art. 1398
Art. 1376
Art. 1354
ART.
Art. 1372-1373-1374
Art. 1408
Art. 1386
DESCRIPTION
per/for Art.
1353
1226
1354
1228
1398
“O-Rings” (5 pcs).
1353 - 1354
1372
1376
Electrodes (5 pcs).
1902*
Nozzle holder suitable for gouging too.
1226 - 1228
1377
Swirl ring.
1226 - 1228
1509
Extractor for Swirl-Ring.
1377
1378
Brass diffusers (5 pcs).
1226 - 1228
1386
Spacing springs (5 pcs).
1226
1408
1226
169
1226
155
1226
1373
1374
1226 - 1228
1226 - 1228
1226 - 1228
1226 - 1228
* Absolutely interchangeable
with art.1389.
26
PROFESSIONAL
2011 - APRIL
power tig 1640 DC-HF
INVERTER MMA AND D.C. TIG WELDING POWER SOURCE. HF IGNITION.
264
Art.
Specifications
TIG
S
MMA
240V 50/60 Hz
+ 15% / -20%
Single phase input
16 A
3.4 KVA 40%
2.7 KVA 60%
2.2 KVA 100%
4.6 KVA 30%
3.5 KVA 60%
2.8 KVA 100%
Input power
5A ÷ 160A
10A ÷ 140A
160A 40%
135A 60%
110A 100%
140A 30%
115A 60%
95A 100%
IP 23 S
Protection class
10.3 Kg
Weight
171x420x340H
Dimensions mm
ART.
DESCRIPTION
264
Inverter MMA and D.C. TIG welding power source with built-in HF ignition. Comes without welding torch and cables.
1262
BINZEL “ABITIG 200” Up/Down torch (200 A - 35%) 4 m. length.
1260
BINZEL “ABITIG 200” torch (200 A-35%) 4 m. length.
1432
187
Remote control unit for welding current adjustment.
1192
5 m. extension cable for remote control unit art. 187.
193
Foot control unit for welding current adjustment.
Equipped with 5 m. cable and ON/OFF switch.
1180
Adapter to simultaneously attach the torch and the foot control unit.
1451
2 gauge flowmeter.
2011 - APRIL
PROFESSIONAL
27
bi-welder tig 2040 DC-HF
INVERTER multivoltage MMA AND pulse D.C. TIG WELDING POWER SOURCE. HF IGNITION.
265
Art.
S
Specifications
TIG
MMA
240V 50/60 Hz
+15% / -20%
Single phase input
16 A
16 A
4.7 KVA 40%
3.2 KVA 60%
2.7 KVA 100%
4.5 KVA 35%
3.8 KVA 60%
3.4 KVA 100%
Input power
5A ÷ 200A
10A ÷ 140A
200A 40%
160A 60%
140A 100%
140A 35%
125A 60%
115A 100%
Duty Cycle, (10 min.40°C)
according to EN 60974.1
IP 23 S
Protection class
12.9 Kg
Weight
176x450x402H
Dimensions mm
ART.
DESCRIPTION
265
Inverter multi-voltage MMA and pulse D.C. TIG welding power source with built-in HF ignition.
Comes without welding torch and cables.
1262
1260
1432
187
1192
193
1180
1451
2 gauge flowmeter.
28
PROFESSIONAL
2011 - APRIL
tig sound dc 2341/t
360
Art.
Specifications
TIG
S
MMA
415V 50/60 Hz
±10%
Three phase input
10 A
10 A
5.7 KVA 40%
5.0 KVA 60%
4.0 KVA 100%
7.0 KVA 60%
4.5 KVA 1 00%
Input power
5A ÷ 230A
10A ÷ 210A
230A 40%
210A 60%
180A 100%
210A 60%
150A 100%
according to IEC 60974.1
IP 23 S
Protection class
16 Kg
Weight
207x437x411H
Dimensions mm
ART.
DESCRIPTION
360
Inverter multi-voltage MMA and pulse D.C. TIG welding power source with built-in HF ignition. Can be connected to the
optional cooling unit.
1262
1260
1256
BINZEL “ABITIG 450 W” water cooled torch (450 Amp.) - 4 m. length.
1258
BINZEL “ABITIG 450 W UP/DOWN” Water cooled torch (450 Amp.) - 4 m. length.
1341
GR53 Torch cooling unit.
Single phase input 230V - 50/60Hz.
1432
1656
Trolley for moving the power source when connected also to the optional cooling unit. Art. 1341.
187
1192
193
1180
1281
Accessories set for electrode welding:
electrode holder (4 m. -16mm2),
work return lead (4 m - 16 mm2)
1451
2 gauge flowmeter.
2011 - APRIL
PROFESSIONAL
29
tig sound dc 3241/t
362
Art.
S
Specifications
TIG
MMA
415V 50/60 Hz
±10%
Three phase input
16 A
16 A
9.6 KVA 40%
7.8 KVA 60%
6.6 KVA 100%
11.5 KVA 40%
9.3 KVA 60% Input power
7.8 KVA 1 00%
5A ÷ 320A
10A ÷ 280A
320A 40%
280A 60%
250A 100%
280A 40%
240A 60%
210A 100%
IP 23 S
Protection class
79.5 Kg
705x1060x975H
ART.
Weight
Dimensions mm
DESCRIPTION
362
Inverter multi-voltage MMA and pulse D.C. TIG welding power source with built in HF ignition.
Comes with cooling unit and trolley for transportation of the power source.
Without torch and welding cables.
1256
BINZEL “ABITIG 450 W” water cooled torch 1258
BINZEL “ABITIG 450 W UP/DOWN” Water cooled torch 187
1192
193
1180
(450 Amp.) - 4 m. length.
(450 Amp.) - 4 m. length.
1451
30
2 gauge flowmeter.
PROFESSIONAL
2011 - APRIL
tig sound ac-dc 1531/m
INVERTER MMA AND pulse a.c.-D.C. TIG WELDING POWER SOURCE. HF IGNITION.
364
Art.
Specifications
TIG
S
MMA
240V 50/60 Hz
+ 15% / -20%
Single phase input
16 A
3.9 KVA 30%
2.5 KVA 60%
2.2 KVA 100%
4.4 KVA 30%
3.3 KVA 60%
3.0 KVA 100%
Input power
5A ÷ 150A
10A ÷ 130A
150A 30%
110A 60%
100A 100%
130A 30%
100A 60%
90A 100%
IP 23 S
Protection class
17.6 Kg
Weight
207x500x411H
Dimensions mm
ART.
DESCRIPTION
364
Inverter MMA and pulse A.C.-D.C. TIG welding power source with built-in HF ignition.
1262
1260
1432
187
1192
193
1180
1451
2 gauge flowmeter.
2011 - APRIL
PROFESSIONAL
31
tig sound ac-dc 2240/m
INVERTER MMA AND pulse a.c.-D.C. TIG WELDING POWER SOURCE. HF IGNITION.
365
Art.
Specifications
TIG
S
MMA
240V 50/60 Hz
+ 15% / -20%
Single phase input
16 A
5.6 KVA 40%
4.2 KVA 60%
3.6 KVA 100%
6.6 KVA 30%
4.8 KVA 60%
3.6 KVA 100%
Input power
5A ÷ 220A
10A ÷ 180A
220A 40%
180A 60%
160A 100%
180A 30%
140A 60%
110A 100%
IP 23 S
Protection class
21.5 Kg
Weight
207x545x411H
Dimensions mm.
ART.
DESCRIPTION
365
Inverter MMA and pulse A.C.-D.C. TIG welding power source with built-in HF ignition.
Can be connected to the optional cooling unit. Comes without cooling unit, welding torch and cables.
1262
BINZEL “ABITIG 200”Up/Down torch (200 A - 35%) 4 m. length.
1260
1256
1258
BINZEL “ABITIG 450 W UP/DOWN” water cooled torch (450 Amp.) - 4m length.
1341
GR53 Torch cooling unit.
Single phase input 230V - 50/60Hz.
1432
1656
Trolley for transportation of the power source when connected also to the optional cooling unit Art. 1341.
187
1192
193
1180
1451
2 gauge flowmeter.
32
PROFESSIONAL
2011 - APRIL
tig sound ac-dc 2641/T synergic
synergic INVERTER MMA AND pulse a.c./D.C. TIG WELDING poweR source. HF IGNITION.
366
Art.
Specifications
TIG
S
MMA
415V 50/60 Hz
± 10%
Three phase input
10 A
6.6 KVA 40%
6.3 KVA 60%
5.8 KVA 100%
7.3 KVA 40%
7.0 KVA 60%
6.5 KVA 100%
Input power
5A ÷ 260A
10A ÷ 210A
260A 40%
240A 60%
230A 100%
210A 40%
200A 60%
190A 100%
IP 23 S
Protection class
65 Kg
Weight
705x1060x975H
Dimensions mm
ART.
DESCRIPTION
366
Synergic inverter MMA and pulse A.C.-D.C. TIG welding power source with built-in HF ignition.
Can be connected to the optional cooling unit.
Comes with trolley for transportation of the power source.
Without cooling unit, torch and welding cables.
1256
1258
1683
GRV 12 Torch cooling unit.
187
1192
193
1180
1281
1451
2 gauge flowmeter.
366.05
Power source in complete version (see item 366) with 50-60Hz three-phase autotransformer 240V.
2011 - APRIL
PROFESSIONAL
33
367
Art.
S
Specifications
TIG
MMA
415V 50/60 Hz
± 10%
Three phase input
20 A
10.4 KVA 40% 14.5 KVA 40%
10.1 KVA 60% 14.0 KVA 60% Input power
9.7 KVA 100% 13.5 KVA 100%
5A ÷ 330A
10A ÷ 330A
330A40% 330A40%
320A60% 320A60%
310A100% 310A100%
IP 23 S
Protection class
93 Kg
Weight
705x1060x975H
Dimensions mm
ART.
DESCRIPTION
367
Synergic inverter MMA and pulse A.C.-D.C. TIG welding power source with built-in HF ignition. Comes with cooling unit and
trolley for transportation of the power source.
1256
1258
187
1192
193
1180
EARTH
4m Earth lead.
1451
2 gauge flowmeter.
34
PROFESSIONAL
2011 - APRIL
368
Art.
Specifications
TIG
S
MMA
415V 50/60 Hz
± 10%
Three phase input
25 A
16.0 KVA 60% 15.8 KVA 60%
Input power
12.5 KVA 100% 13.5 KVA 100%
5A ÷ 450A
10A ÷ 360A
450A 60%
380A 100%
360A 60%
320A 100%
IP 23 S
Protection class
136 Kg
Weight
705x1060x1155H
Dimensions mm
ART.
DESCRIPTION
368
Synergic inverter MMA and pulse A.C.-D.C. TIG welding power source with built-in HF ignition. Comes with cooling unit and
trolley for transportation of the power source.
1256
1258
187
1192
193
1180
EARTH
4m Earth lead.
1451
2 gauge flowmeter.
2011 - APRIL
PROFESSIONAL
35
tig torches
ART.
Art.1256
Art.1258
Art.1259
Art.1260
Art.1262
Art.1277
Art.1567.01
Art.1637
DESCRIPTION
per/for Art.
1256
BINZEL “ABITIG 450 W” Water cooled torch (450 Amp) 4 m. length.
309-360-362-365
366-366.05-367
367.05-368-368.05
1258
BINZEL “ABITIG 450 W” Up/Down. Water cooled torch (450 Amp). 4 m. length.
309-360-362-365
366-366.05-367
367.05-368-368.05
1259
BINZEL “ABITIG 200” torch (200A - 35%) - 4 m long. “Euro” type connection.
387-387.05
389-389.05
1260
BINZEL “ABITIG 200” torch (200A - 35%) 4 m. long.
264-265-360
364-365
1262
BINZEL “ABITIG 200” Up/Down torch (200A - 35%) 4 m. long.
264-265-360
364-365
1277
3 m “CEBORA SR17” TIG welding torch. With control push-button for gas and power.
283-283.11
1567.01
“CEBORA T 150” torch 4 m. long.
256-257
1637
3 m “CEBORA” TIG welding torch. With control push-button for gas and power.
298-298.11
36
PROFESSIONAL
2011 - APRIL
power rod 131
MMA AND TIG INVERTER TYPE D.C. WELDING POWER SOURCE. CEBORA LIFT IGNITION.
Art.
S
256
Specifications
240V 50/60 Hz
+ 15% / -20%
Single phase input
16 A
4.0 KVA 30%
3.3 KVA 60%
3.0 KVA 100%
Input power
10A ÷ 130A
130A 30%
110A 60%
100A 100%
Ø 1.5 ÷ 3.2
Electrodes that can be used
IP 23 S
Protection class
4.5 Kg
Weight
160x302x292H
Dimensions mm
ART.
DESCRIPTION
256
MMA and TIG inverter type D.C. welding power source. Cebora lift ignition. Antishock plastic housing with shoulder strap.
Comes without torch and welding cables.
1281
1567.01
“CEBORA T 150” torch 4 m. length.
2011 - APRIL
PROFESSIONAL
37
power rod 1535
Art.
S
257
Specifications
240V 50/60 Hz
+ 15% / -20%
Single phase input
16 A
4.8 KVA 35%
3.9 KVA 60%
3.5 KVA 100%
Input power
5A ÷ 150A
150A 35%
125A 60%
115A 100%
Ø 1.5 ÷ 4.0
IP 23 S
Protection class
9.2 Kg
Weight
172x420x340H
Dimensions mm
ART.
DESCRIPTION
257
MMA and TIG inverter type D.C. welding power source Cebora lift ignition.
Comes without torch and welding cables.
1281
1567.01
“CEBORA T 150” torch 4 m. length.
38
PROFESSIONAL
2011 - APRIL
power rod 1840
Art.
S
261
Specifications
240V 50/60 Hz
+ 15% / -20%
Single phase input
16 A
6.0 KVA 40%
4.7 KVA 60%
3.6 KVA 100%
Input power
10A ÷ 180A
180A 40%
150A 60%
120A 100%
Ø 1.5 ÷ 4.0
IP 23 S
Protection class
9.5 Kg
Weight
172x420x340H
Dimensions mm
ART.
DESCRIPTION
261
MMA and TIG inverter type D.C. welding power source. Cebora lift ignition.
Comes without welding torch and cables
1281
187
Remote control unit for MMA welding current adjustment.
1327
5 m. extension cable for remote control art. 187.
181
Foot control unit for welding current adjustment. Equipped with 5 m. cable and ON/OFF switch.
1180
2011 - APRIL
PROFESSIONAL
39
sound mma 2336/T
mma and tig INVERTER type d.c. WELDING POWER SOURCE. CEBORA LIFT IGNITION.
Art.
S
328
Specifications
415V 50/60 Hz
± 10%
Three phase input
10 A
8.3 KVA 35%
6.9 KVA 60%
6.0 KVA 100%
Input power
10A ÷ 230A
230A 35%
210A 60%
190A 100%
Ø 1.5 ÷ 4.0
IP 23 S
Protection class
15.7 Kg
Weight
207x437x411H
Dimensions mm
ART.
DESCRIPTION
328
1281
187
1192
5 m. extension cable for remote control art. 187.
181
Foot control unit for welding current adjustment. Equipped with 5 m. cable and ON/OFF switch.
1432
40
PROFESSIONAL
2011 - APRIL
Sound mma 3536/T Cell
mma and tig INVERTER type d.c. WELDING POWER SOURCE. CEBORA LIFT IGNITION.
Art.
S
335
Specifications
415V 50/60 Hz
± 10%
Three phase input
16 A
14.4 KVA 35%
10.0 KVA 60%
8.0 KVA 100%
Input power
10A ÷ 350A
350A 35%
270A 60%
230A 100%
Ø 1.5 ÷ 6.0
IP 23 S
Protection class
26.3 Kg
Weight
297x463x588H
Dimensions mm
SUITABLE FOR CELLULOSIC COATED ELECTRODES.
ART.
DESCRIPTION
335
1286.05
4m Earth lead.
187
1192
181
Foot control unit for welding current adjustment. Equipped with 5 m cable and ON/OFF switch.
1432
2011 - APRIL
PROFESSIONAL
41
evo 200 M synergic combi
gas/no gas MIG-MAG SYNERGIC WELDING MACHINE.
Art.
S
622
Specifications
240V 50/60 Hz
± 10%
Single phase input
25 A
7.8 KVA 20%
3.3 KVA 60%
2.5 KVA 100%
Input power
25A ÷ 230A
Min.-max. current that can be obtained in welding
180A 20%
105A 60%
80A 100%
2x6
Number of regulation steps
0.6/0.8/0.9 Fe
0.6/0.8/0.9/1.0 Al
0.8/0.9 Inox Wire sizes that can be used
0.9 Cored
0.8/0.9 Cu-Si 3%
Ø 300 mm/15 Kg
Max. wire spool size
IP 21 S
Protection class
58 Kg
Weight
515x820x660H
Dimensions mm
One programmable control circuit board only for all the EVO Synergic models.
ART.
DESCRIPTION
622
Compact single-phase synergic MIG-MAG and flux cored wire welding machine with 2-roll wire feeder in aluminium, digital control
panel with ammeter and stored synergic curves (aluminium, mild and stainless steel), post-gas, soft start adjustment, spot/stitch
welding time and burn back adjustment. Comes with work return lead (3,5 m - 25 mm2) and clamp.
Without torch and flowmeter.
2003
4m (12 ft.) CEBORA PULL 2003, UP-DOWN torch.
1562
Spool Gun for 750 gr. Fe or 500 gr. Al wire spools. (DIN 8559)
1196
6 m. extension between art.1562 Spool Gun and power source.
1196.20 12 m. extension between art.1562 Spool Gun and power source.
1242
CEBORA 280 A torch - 3,5 m long. EURO type connection.
1451
2 gauge flowmeter.
136
Updating kit for software and synergic programmes.
1933
Aluminium welding kit consisting of:
4,3 m. wire liner assy for 1,0-1,2 mm wire and wire guide pipe (for torch Art. 1242).
1920
Arm + liner kit for 2-roller wire feeder, for Cu-Si 3% wire welding.
42
PROFESSIONAL
2011 - APRIL
evo 200 T synergic
MIG-MAG SYNERGIC WELDING MACHINE and gma brazing machine.
Art.
S
627
Specifications
415V 50/60 Hz
± 10%
Three phase input
16 A 10 A
( 230 V) (400 V)
6.9 KVA 30%
4.2 KVA 60%
3.2 KVA 100%
Input power
18A ÷ 240A
190A 30%
135A 60%
105A 100%
Duty Cycle. (10 min.40°C)
2x6
0.6/0.8/0.9/1.0 Fe
0.6/0.8/0.9/1.0/1.2 Al
Wire sizes that can be used
0.8/0.9/1.0 Inox
0.8/0.9/1.0 Cu-Si 3%
Ø 300 mm/15 Kg
IP 21 S
Protection class
62 Kg
Weight
515x820x660H
Dimensions mm
ART.
DESCRIPTION
627
Compact three-phase synergic MIG-MAG welding machine with 2-roll wire feeder in aluminium, digital control panel with
ammeter and stored synergic curves (aluminium, mild, stainless steel and galvanized sheet gma brazing), post-gas, soft
start adjustment, spot/stitch welding time and burn back adjustment. Comes with work return lead (3,5 m - 25 mm2) and
clamp. With spot welding timer.
2003
1562
1196
1196.20
1242
1451
2 gauge flowmeter.
136
1933
1920
Arm + liner kit for 2-roller wire feeder, for Cu-Si 3% wire welding.
2011 - APRIL
PROFESSIONAL
43
evo 350 TC synergic
MIG-MAG SYNERGIC WELDING MACHINE.
Art.
S
641
Specifications
415V 50/60 Hz
± 10%
Three phase input
40 A 25 A
(230 V) (400 V)
1 5.9 KVA 40%
10.7 KVA 60%
7.6 KVA 100%
Potenza assorbita
Input power
35A ÷ 400A
350A 40%
290A 60%
220A 100%
2x8
0.6/0.8/0.9/1.0/1.2 Fe
0.6/0.8/0.9/1.0/1.2 Al
0.6/0.8/0.9/1.0/1.2 Inox
0.9 Cu-Si 3%
Ø 300 mm/15 Kg
IP 21 S
Protection class
95 Kg
Weight
542x915x795H
Dimensions mm
ART.
DESCRIPTION
641
Compact three-phase synergic MIG-MAG welding machine with 4-roll wire feeder in aluminium, digital control panel with ammeter and stored synergic curves (aluminium, mild and stainless steel), post-gas, soft start adjustment, spot/stitch welding time
and burn back adjustment. Comes with work return lead (3,5 m - 35 mm2) and clamp.
2003
1239
1562
1196
1196.20
1451
2 gauge flowmeter.
136
1929
44
PROFESSIONAL
2011 - APRIL
evo 350 TS synergic
Art.
S
643
Specifications
415V 50/60 Hz
± 10%
Three phase input
40 A 25 A
(230 V) (400 V)
1 5.9 KVA 40%
10.7 KVA 60%
7.6 KVA 100%
Input power
35A ÷ 400A
350A 40%
290A 60%
220A 100%
2x8
0.6/0.8/0.9/1.0/1.2 Fe
0.6/0.8/0.9/1.0/1.2 Al
0.6/0.8/0.9/1.0/1.2 Inox
0.9 Cu-Si 3%
Ø 300 mm/15 Kg
IP 21 S
Protection class
90 Kg
Weight
615x975x900H
Dimensions mm
ART.
DESCRIPTION
1662
Synergic three phase power source for MIG-MAG welding. Comes with work return lead (3,5 m - 35mm2) and clamp.
Without torch, wire feed unit and extension lead.
TDA2 wire feed unit with Cebora 2-roller wire feed block in aluminium, digital control panel with ammeter/voltmeter, stored
synergic curves (aluminium, mild steel, stainless steel), post-gas adjustment, soft start, spot/stitch welding time, wire test,2/4
times, ready for water cooled torch.
TD4-HD wire feed unit as above, but with Cebora 4-roller Ø 40 wire feed block in aluminium. Fitted with interface for CEBORA
PUSH-PULL art. 2010
1239
“CEBORA 380 A” torch 3,5 m. long.
1241
“CEBORA 380 A” water cooled torch 3,5 m. long.
2010
6m (20 ft) Cebora push-pull, Up/Down water cooled torch. (350Amp. - 60%).To be used together with cooling unit Art. 1680
and TD4-HD wire feed unit Art. 1662.
1182
95 mm2-5 m. extension lead between power source and wire feeder.
1182.20
1680
GRV8 Torch cooling unit.
1451
2 gauge flowmeter.
136
1929
Aluminium welding kit consisting of: 3,5 m. wire liner assy for 1,0-1,2 mm wire and wire guide pipe.
(for torches item 1239-1241).
3,5 m. wire liner assy for 1,2-1,6 mm Al wire.
(for torches item 1239-1241).
643
1652
1930
2011 - APRIL
PROFESSIONAL
45
evo 450 TS synergic
Art.
S
647
Specifications
415V 50/60 Hz
± 10%
Three phase input
50 A 32 A
(230 V) (400 V)
2 3.5 KVA 40%
16.6 KVA 60%
11.8 KVA 100%
Input power
40A ÷ 500A
450A 40%
370A 60%
290A 100%
4x8
0.8/0.9/1.0/1.2/1.6 Fe
1.0/1.2/1.6 Al
0.8/0.9/1.0/1.2 Inox
1.2 Cored
Ø 300 mm/15 Kg
IP 21 S
Protection class
125 Kg
Weight
615x975x900H
Dimensions mm
ART.
DESCRIPTION
1662
Synergic three phase power source for MIG-MAG welding. Comes with work return lead (3,5 m - 95mm2) and clamp.
Without torch, wire feed unit and extension lead.
TDA2 wire feed unit with Cebora 2-roller wire feed block in aluminium, digital control panel with ammeter/voltmeter, stored
synergic curves (aluminium, mild steel, stainless steel), post-gas adjustment, soft start, spot/stitch welding time, wire test,2/4
times, ready for water cooled torch.
TD4-HD wire feed unit as above, but with Cebora 4-roller Ø 40 wire feed block in aluminium. Fitted with interface for CEBORA
PUSH-PULL art. 2010
1239
“CEBORA 380 A” torch 3,5 m. long.
1241
1243
2010
6m (20 ft) Cebora push-pull, Up/Down water cooled torch. (350Amp. - 60%).To be used together with cooling unit Art. 1680
and TD4-HD wire feed unit Art. 1662.
1182
1182.20
1680
1451
2 gauge flowmeter.
647
1652
136
1929
(for torches item 1239-1241-1243).
3,5 m. wire liner assy for 1,2-1,6 mm Al wire.
(for torches item 1239-1241-1243).
1930
46
PROFESSIONAL
2011 - APRIL
tri star mig 1636/m
INVERTER multiprocess power source for mig/mag, DC tig and mma welding.
298
Art.
Specifications
MIG/MAG
DC TIG
S
MMA
240V 50/60 Hz
+15% / -20%
Single phase input
16 A
4.5 KVA 35% 4.5 KVA 35% 3.4 KVA 60% 3.4 KVA 60% 4.0 KVA 60% Input power
3.0 KVA 100% 3.0 KVA 100% 3.7 KVA 100%
15A ÷ 160A
5A ÷ 160A
10A ÷ 130A
160A 35%
130A 60%
120A 100%
160A 35%
130A 60%
120A 100%
130A 60%
120A 100%
Electronic
0.6/0.8/1.0 Fe
1.0 Al
0.8 Inox
0.8 Cu-Si 3%
0.9 Cored
Ø 200 mm/
5 Kg
-
min.-max. current that can be obtained in welding
Stepless regulation
-
-
-
-
-
Ø 1.5
Ø 3.25
IP 23 S
Protection class
13 Kg
Weight
207x437x411H
Dimensions mm
ART.
DESCRIPTION
298
Inverter multiprocess single-phase power source for MIG/MAG, DC TIG (with “Cebora lift ignition”) and MMA welding, with
2-roller wire feeder and stored synergic curves for MIG/MAG welding, electronic control of choke value, spot welding time and
pause time. Comes with 3m CEBORA MIG welding torch Art. 1635 and work return lead (3m - 16mm²).
Without flowmeter, MMA welding cables and TIG welding torch.
298.11
Power source as above. Comes with work return lead (3m - 16mm²).
Version without MIG/MAG torch, without flowmeter, MMA welding cables and TIG welding torch.
1635
3 m. MIG torch.
1636
“PROFESSIONAL” CEBORA MIG torch - 3 m long (special for cored wire).
1637
3 m “CEBORA” TIG welding torch. With control push-button for gas and power.
1281
1432
Trolley for transportation of the power source only, with 180 mm gas bottle.
1656
Trolley for transportation of the power source with 230 mm gas bottle.
1659
Trolley for carrying up to 2 power sources and 180 mm gas bottle.
1451
2 gauge flowmeter.
1934
Aluminium welding kit consisting of: liner, wire feed roller and contact tip for ø 1 mm wire.For torches Art. 1635 and 1636.
136
Software updating kit.
2011 - APRIL
PROFESSIONAL
47
sound mig 2230/M star synergic
synergic inverter mig/mag welding single-phase power source.
Art.
S
299
Specifications
240V 50/60 Hz
+15% / -20%
Single phase input
20 A
6.8 KVA 30%
4.9 KVA 60%
3.5 KVA 100%
Input power
15A ÷ 220A
220A 30%
175A 60%
145A 100%
Electronic
Stepless regulation
0.6/0.8/0.9/1.0/1.2 Fe
0.8/0.9/1.0/1.2 Al
0.6/0.8/0.9/1.0/1.2 Inox Wire sizes that can be used
0.8/0.9/1.0 Cu-Si 3%
0.8/1.0 Cu-Al8 (AlBz8)
0.9 Cored
Ø 300 mm/15 Kg
IP 23 S
Protection class
27 Kg
Weight
320x585x500H
Dimensions mm
ART.
DESCRIPTION
299
Synergic inverter MIG/MAG welding single-phase power source, with 2-roller wire feed unit in aluminium, with manual/synergic
control panel with stored curves. Comes with work return lead (3,5 m - 25 mm²) and clamp.
Comes without welding torch.
2003
4 m (12 ft) CEBORA PUSH-PULL, UP-DOWN torch.
1242
“CEBORA 280 A” torch 3,5 m (9 ft) long. Euro type connection
1656
Trolley for transportation of the power source.
159
Additional support for fixing the power source Art. 299 on the transportation trolley Art. 1656.
1451
2 gauge flowmeter.
1933
48
PROFESSIONAL
2011 - APRIL
sound mig 2060/MD star double pulse
inverter mig/mag welding single-phase power source. double pulse.
Art.
S
301
Specifications
240V 50/60 Hz
+15% / -20%
Single phase input
20 A
5.7 KVA 60%
4.1 KVA 100%
Input power
15A ÷ 200A
200A 60%
160A 100%
Electronic
Stepless regulation
0.6/0.8/1.0 Fe
0.6/0.8/1.0/1.2 Al
0.6/0.8/1.0 Inox Wire sizes that can be used
0.8/1.0 Cu-Si 3%
0.8/1.0 Cu-Al8 (AlBz8)
Ø 200 mm/5 Kg
Ø 300 mm/15 Kg
IP 23 S
Protection class
21.5 Kg
Weight
260x580x471H
Dimensions mm
ART.
DESCRIPTION
301
Synergic inverter MIG/MAG double pulse single-phase welding power source, with 2-roller wire feed unit in aluminium, with
manual/synergic control panel with stored curves, electronic control of choke value, spot welding time and pause time. Comes
with work return lead (3 m - 25 mm²) and clamp.
2003
1242
“CEBORA 280 A” torch 3,5 m (9 ft) long. Euro type connection
1451
2 gauge flowmeter.
114
Kit for 15 kg. Ø 300 mm wire reels.
1656
Cart for transportation of the power source when used with kit art. 114.
1933
4,3 m. wire liner assy for ø 1,0-1,2 mm wire and wire guide pipe (for torch Art. 1242).
2011 - APRIL
PROFESSIONAL
49
Art. 301 + 2003
Art. 2003
ART.
Art. 301
DESCRIPTION
301
2003
consumables
ART.
DESCRIPTION
1812
Contact tip ø 0.8 for Fe/stainless steel/cored wire/CuSi3-AlBz8 (10 pcs).
1813
1819
Contact tip ø 1.0 for Aluminium (10 pcs).
1822
1823
1838
1496
1887
1882
1883
1884
1885
1886
Welding gas nozzle.
50
Gas diffusor.
Aluminium/12% silicon AWS 4047 wire reel Ø 0.6 Kg. 1
Aluminium/12% silicon AWS 4047 wire reel Ø 0,8 Kg. 2
Aluminium/12% silicon AWS 4047 wire reel Ø 1 Kg. 2
AL/Mg 5% AWS 5356 wire reel Ø 0,8 Kg. 2
AL/Mg 5% AWS 5356 wire reel Ø 1 Kg. 2
Copper/silicon 3% wire reel Ø 0.8 Kg. 2 for braze welding.
PROFESSIONAL
2011 - APRIL
Art. 301 + 1242
Art. 1242
ART.
Art. 301
DESCRIPTION
301
1242
CEBORA 280 A torch 3,5 m (9 ft.) long. Euro type connection
consumables
ART.
DESCRIPTION
1812
1813
1819
1820
1822
1823
1834
1886
1933
Cylindrical welding gas nozzle.
2011 - APRIL
Copper/silicon 3% wire reel Ø 0.8 Kg. 2 for braze welding.
Aluminium welding kit consisting of: 4,3 m. wire liner assy for 1,0-1,2 mm wire and wire guide pipe (for torch Art. 1242).
PROFESSIONAL
51
Art. 301 + 1656 + 114
ART.
DESCRIPTION
301
114
Kit for 15 kg. Ø 300 mm wire reels.
1656
Cart for transportation of the power source when used with kit art. 114.
52
PROFESSIONAL
2011 - APRIL
jaguar sound mig 2060/MD star double pulse
inverter mig/mag welding single-phase power source. with two spools.
Art.
S
302
Specifications
240V 50/60 Hz
+15% / -20%
Single phase input
20 A
5.7 KVA 60%
4.1 KVA 100%
Input power
15A ÷ 200A
200A 60%
160A 100%
Electronic
Stepless regulation
0.6/0.8/1.0 Fe
0.6/0.8/1.0/1.2 Al
0.6/0.8/1.0 Inox Wire sizes that can be used
0.8/1.0 Cu-Si 3%
0.8/1.0 Cu-Al8 (AlBz8)
Ø 200 mm/5 Kg
Ø 300 mm/15 Kg
IP 23 S
Protection class
75 Kg
Weight
588x952x990H
Dimensions mm
ART.
DESCRIPTION
302
Synergic inverter MIG/MAG double pulse single-phase welding power source, with 2 wire feed units in aluminium
(2-roller), with manual/synergic control panel with stored curves, electronic control of choke value, spot welding time and
pause time. Trolley for transportation of the power source. Can be connected to the optional cooling unit. Comes with
work return lead (3 m - 25 mm²) and clamp.
Comes without cooling unit and welding torch.
2003
2010
6 m (20 ft) CEBORA PUSH-PULL, Up/Down WATER COOLED torch (350 A - 60%). To be used together with COOLING UNIT.
1241
“CEBORA 380 A” water cooled torch 3,5 m (9 ft) long.
1242
“CEBORA 280 A” torch 3,5 m (9 ft) long. Euro type connection.
1683
GRV12 Torch cooling unit. Single phase input 230V - 50/60Hz.
1451
2 gauge flowmeter.
1929
(for torch art 1241).
1933
Aluminium welding kit consisting of: 4,3 m. wire liner assy for 1,0-1,2 mm wire and wire guide pipe
(for torches Art. 1242 and 2003).
For art. 2010 PUSH PULL torch liners and
swan neck art. 1859 see page 62.
2011 - APRIL
PROFESSIONAL
53
sound mig 2740/T star pulse
synergic inverter mig/mag pulse welding power source.
Art.
S
307
Specifications
415V 50/60 Hz
+15% / -20%
Three phase input
16 A
1 0.4 KVA 40%
9.0 KVA 60%
8.1 KVA 100%
Input power
15A ÷ 275A
275A 40%
255A 60%
240A 100%
Electronic
Stepless regulation
0.8/0.9/1.0/1.2 Fe
0.8/0.9/1.0/1.2 Al
0.8/0.9/1.0/1.2 Inox Wire sizes that can be used
0.8/0.9/1.0 Cu-Si 3%
0.8/0.9/1.0 Cu-Al8 (AlBz8)
Ø 300 mm/15 Kg
IP 23 S
Protection class
67 Kg
Weight
510x970x960H
Dimensions mm
ART.
DESCRIPTION
307
Synergic inverter MIG/MAG Pulse welding power source. Comes with control panel, 4-roller wire feed unit in aluminium, trolley
for transportation of the power source and earth cable (3,5 m - 35 mm²).
1241
1242
“CEBORA 280 A” torch 3,5 m (9 ft) long.
Euro type connection.
2009
6 m (20 ft) CEBORA PUSH-PULL, Up/Down WATER COOLED torch (350 A - 60%). To be used together with COOLING UNIT and
PUSH PULL INTERFACE KIT..
126
Cebora Push Pull torch interface kit. To be used together with Push-Pull torch art. 2009 and cooling unit.
1681
1451
2 gauge flowmeter.
1929
Aluminium welding kit consisting of: 3,5 m. wire liner assy for 1,0-1,2 mm wire and wire guide pipe. (for torch art 1241).
1930
3,5 m. wire liner assy for 1,2-1,6 mm wire and wire guide pipe. (for torch Art. 1241).
1933
Upgrade to Double Pulse.
For art. 2009 PUSH PULL torch liners and
swan neck art. 1859 see page 62.
54
PROFESSIONAL
2011 - APRIL
synergic inverter multiprocess pulse power source for mig/mag, tig and mma welding
Art.
S
309
Specifications
415V 50/60 Hz
±10%
Three phase input
16 A
1 3.1 KVA 40%
10.4 KVA 60%
8.6 KVA 100%
Input power
5A ÷ 350A
350A 40%
280A 60%
260A 100%
Electronic
Stepless regulation
0.8/0.9/1.0/1.2 Fe
0.9/1.0/1.2 Al
0.8/0.9/1.0/1.2 Inox
0.8/0.9/1.0 C
u-Si 3%
Ø 300 mm/15 Kg
Ø 1.5 ÷ Ø 6
IP 23 S
Protection class
80 Kg
Weight
590x1090x960H
Dimensions mm.
ART.
DESCRIPTION
309
Synergic inverter multiprocess power source for MIG/MAG, Pulse, MMA and DC TIG (with Cebora lift ignition) welding. Comes
with control panel, with wire feed unit in aluminium (4-roller), trolley for transportation of the power source and earth cable
(3.5 m - 35 mm²).
1239
“CEBORA 380 A” torch 3,5 m (9 ft) long.
1241
1256
BINZEL “ABITIG 450 W” Water cooled torch (450 Amp) 4 m. length.
1258
BINZEL “ABITIG 450 W” Up/Down. Water cooled torch (450 Amp) 4 m. length.
1165
Adapter for connecting the TIG Binzel torch Art. 1256-1258 to the power source.
2008
PUSH PULL INTERFACE KIT.
2008.10
10 m (32 ft) CEBORA PUSH-PULL, Up/Down WATER COOLED torch (350 A - 60%). To be used together with COOLING UNIT
and PUSH PULL INTERFACE KIT.
106
Cebora Push Pull torch interface kit. To be used together with Push-Pull torch art. 2008-2008.10 and cooling unit art. 1683.
1683
1451
2 gauge flowmeter.
2011 - APRIL
PROFESSIONAL
55
synergic INVERTER multiprocess pulse power source for mig/mag, tig and mma welding.
Art.
S
387
Specifications
415V 50/60 Hz
+15% / -20%
Three phase input
20 A
1 5.9 KVA 40%
13.2 KVA 60%
11.7 KVA 100%
Input power
5A ÷ 380A
380A 40%
340A 60%
310A 100%
Electronic
Stepless regulation
0.6/0.8/0.9/1.0/1.2/1.6 Fe
0.8/0.9/1.0/1.2/1.6 Al
0.6/0.8/0.9/1.0/1.2/1.6 Inox
0.8/0.9/1.0/1.2 Cu-Si 3%
0.8/1.0/1.2 Cu-Al8 (AlBz8)
1.2/1.6 Cored
Ø 300 mm/15 Kg
Ø 1.5 ÷ Ø 6
IP 23 S
Protection class
101 Kg
Weight
705x1060x1380H
Dimensions mm
ART.
DESCRIPTION
387
with control panel, wire feed unit with 4 roll (ø 40 mm) aluminium wire feed block, cooling unit, trolley for transportation of
the power source and earth cable (3.5 m - 50 mm²).
Without torch and extension.
1241
“CEBORA 380 A” water cooled torch 3,5 m long.
1245
“CEBORA 500 A Up/Down” water cooled torch 3,5 m long.
1259
ABITIG 200 torch - 4 m long.”Euro” type connection.
2008
2008.10
106
Cebora Push Pull torch interface kit. To be used together with Push-Pull torch art. 2008-2008.10 and cooling unit.
1197
5 m. extension lead between power source and wire feeder.
1197.20
471
H.F. “unit 3500” to simultaneously attach MIG and TIG torch and with HF ignition function for TIG. Comes with 1,5 m extension
lead between power source and wire feed unit.
1451
2 gauge flowmeter.
56
PROFESSIONAL
2011 - APRIL
synergic INVERTER multiprocess pulse power source for mig/mag, tig and mma welding.
Art.
S
389
Specifications
415V 50/60 Hz
+15% / -20%
Three phase input
32 A
2 5.0 KVA 40%
21.0 KVA 60%
19.5 KVA 100%
Input power
5A ÷ 500A
500A 40%
450A 60%
430A 100%
Electronic
Stepless regulation
0.6/0.8/0.9/1.0/1.2/1.6 Fe
0.8/0.9/1.0/1.2/1.6 Al
0.6/0.8/0.9/1.0/1.2/1.6 Inox
0.8/0.9/1.0/1.2 Cu-Si 3%
0.8/1.0/1.2 Cu-Al8 (AlBz8)
1.2/1.6 Cored
Ø 300 mm/15 Kg
Ø 1.5 ÷ Ø 6
IP 23 S
Protection class
115 Kg
Weight
705x1060x1380H
Dimensions mm
ART.
DESCRIPTION
389
with control panel, wire feed unit with 4 roll (ø 40 mm) aluminium wire feed block, cooling unit, trolley for transportation of
the power source and earth cable (3.5 m - 90 mm²).
Without torch and extension.
1243
“CEBORA 500 A” water cooled torch 3,5 m long.
1245
“CEBORA 500 A Up/Down” water cooled torch 3,5 m long.
1259
ABITIG 200 torch - 4 m long.”Euro” type connection.
2008
2008.10
106
Cebora Push Pull torch interface kit. To be used together with Push-Pull torch art. 2008-2008.10 and cooling unit.
1197
1197.20
471
H.F. “unit 3500” to simultaneously attach MIG and TIG torch and with HF ignition function for TIG. Comes with 1,5 m extension
lead between power source and wire feed unit.
1451
2 gauge flowmeter.
2011 - APRIL
PROFESSIONAL
57
Mig torches
ART.
Art. 1239
Art.1241
Art. 1242
Art. 1243
Art. 1245
Art. 1275
Art. 1276
Art. 1559.01
Art. 1635
Art. 1636
Art. 2003
DESCRIPTION
per/for Art.
1239
“CEBORA 380A” torch - 3.5 mt. long. “Euro” type connection. (380A -60%)
309-641-643-647
1241
“CEBORA 380A” Water cooled torch - 3.5 mt. long.”Euro” type connection.
302-307-309-387
387.05-643-647
1242
“CEBORA 280A” torch - 3.5 mt. long. “Euro” type connection. (280A -60%)
299-301-302-307
622-624-625-627
633
1243
“CEBORA 500A” Water cooled torch - 3.5 mt. long.”Euro” type connection.
389-389.05-647
1245
“CEBORA 500A” Water cooled Up/Down torch - 3.5 mt. long. “Euro” type connection.
387-387.05-389
389.05
1275
3 m. long CEBORA MIG torch
283-283.11
1276
“PROFESSIONAL” CEBORA MIG torch 3 mt. long. (Special for flux cored wire)
283-283.11
1559.01
CEBORA torch - 3 mt. long.Direct connection.
495
1635
CEBORA MIG torch - 3 mt. long.
298-298.11
1636
“PROFESSIONAL” CEBORA MIG torch - 3 m long (special for cored wire).
298-298.11
2003
4 m CEBORA PUSH-PULL. Up/Down torch.
299-301-302-622
627-641
58
PROFESSIONAL
2011 - APRIL
Mig torches
1635
1636
2003
1459
Contact tip Ø 0.8.
X
X
X
1460
Contact tip Ø 1.0.
X
1462
Contact tipØ 0.9 for cored wire.
X
1823
Contact tip ø 0.6 for Fe/stainless steel/cored wire CuSi3-AlBz8 (10 pcs).
X
X
X
X
X
X
X
X
1812
Contact tip Ø 0.8 for Fe/stainless steel/cored wire CuSi3-AlBz8 (10 pcs).
X
X
X
X
X
X
X
X
1824
X
X
X
X
X
X
X
X
1813
X
X
X
X
X
X
X
X
1814
X
X
X
X
X
X
1815
X
X
X
X
X
X
1816
X
X
X
X
X
1817
X
X
X
X
X
1822
X
X
X
X
X
X
1825
Contact tip ø 0.9. For Aluminium (10 pcs).
X
X
X
X
X
X
1819
Contact tip Ø 1.0 for Aluminium. (10 pcs).
X
X
X
X
X
1820
X
X
X
X
X
1821
X
X
1461
Cone shaped welding gas nozzle.
1829
1833
1834
Cylindrical welding gas nozzle.
1838
Welding gas nozzle.
1839
Welding gas nozzle.
1463
Spot welding gas nozzle.
1496
Gas diffuser.
1955
Gas diffuser.
1966
Ceramic gas diffuser .
1469
Swan neck.
1864
Swan neck.
1865
Swan neck.
1866
Swan neck.
1867
Swan neck.
1868
Swan neck.
1869
Swan neck.
X
X
1466
Swan neck spring.
X
X
1956
Gas nozzle insulated support.
2011 - APRIL
1239
1276
X
1275
X
1245
X
1243
Contact tip Ø 0.6.
DESCRIPTION
1242
1457
ART.
1241
1559.01
ACCESSORIES And consumables for mig/mag torches
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
PROFESSIONAL
X
X
X
X
59
Mig torches
1926
Wire guide liner kit Ø 1.0-1.2 for Fe/stainless steel/cored wire.
X
X
X
1927
Wire guide liner kit Ø 1.2-1.6 for Fe/stainless steel/cored wire.
X
X
X
1931
Wire guide liner kit Ø 0.6-0.9 - Blue 3.5m. for Fe/stainless steel/cored wire.
1936
Wire guide liner kit Ø 0.6-1.0 - Blue 3.5m. for Fe/stainless steel/cored wire.
1932
Wire guide liner kit Ø 1.0-1.2 - red 3.5m for Fe/stainless steel/cored wire.
2335
Insulating washer for contact tip support.
1929
1934
Aluminium welding kit consisting of: 3.5 m. wire liner assy for 1.0-1.2 mm wire
and wire guide pipe.
Aluminium welding kit consisting of: 4.3 m. wire liner assy for 1.0-1.2 mm wire
and wire guide pipe.
Aluminium welding kit consisting of: liner, wire feed roller and contact tip for
ø 1 mm wire
1930
3.5 m. wire liner assy for 1.2-1.6 mm Al wire.
1464.01
Spiral sheet for Fe/Stainless steel.
1925
Spiral sheet kit for Fe/Stainless steel.
1933
60
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
2003
X
X
1636
X
1635
X
1559.01
Contact tip support.
X
1276
1965
1245
X
1243
Contact tip support.
1242
1957
1241
DESCRIPTION
1239
ART.
1275
ACCESSORIES And consumables for mig/mag torches
X
X
X
X
X
X
X
X
PROFESSIONAL
2011 - APRIL
spool gun
MIG-MAG WELDING GUN FOR DIN 8559 SPOOLS. 200A 60%
ART.
DESCRIPTION
1562
MIG-MAG welding gun with small size spool (DIN 8559) for aluminium, steel, iron. Complete with: 0.5 Kg spool of Ø 1 mm
aluminium wire, current nozzles, Ø 0.6-0.8-1-1.2 mm, gas nozzle, 2 mm allen wrench.
1196
6 m extension.
1196.20
12 m extension.
consumables
ART.
DESCRIPTION
1591
Al/Mg 5% wire reel Ø 0.8 Kg. 0.5
1592
Al/Mg 5% wire reel Ø 1 Kg. 0.5
1823
Contact tip ø 0.6 for Fe/stainless steel/cored wire/CuSi3-AlBz8. (10 pcs.).
1812
Contact tip Ø 0.8 for Fe/stainless steel/cored wire/CuSi3-AlBz8. (10 pcs).
1824
1813
1814
1822
Contact tip ø 0.8 for Aluminium (10 pcs.).
1825
Contact tip ø 0.9. For Aluminium (10 pcs).
1819
1820
1838
Welding gas nozzle.
2011 - APRIL
PROFESSIONAL
61
push pull - Art. 2008 - 2008.10 - 2009 - 2010
6 m. (20 ft) / 10 M (32 ft) cebora push pull, up/down water cooled torch.
ART.
DESCRIPTION
per/for Art.
2008
6 m (20 ft) CEBORA PUSH-PULL, Up/Down WATER COOLED torch. (350 Amp - 60%).
To be used together with COOLING UNIT and PUSH PULL INTERFACE KIT.
309-387-387.05
389-389.05
2008.10
309-387-387.05
389-389.05
2009
307
2010
To be used together with COOLING UNIT.
302-643-647
126
Cebora Push Pull torch interface kit.
To be used together with Push-Pull torch Art. 2009 and cooling unit.
2009
106
Cebora Push Pull torch interface kit.
To be used together with Push-Pull torch Art. 2008-2008.10 and cooling unit.
2008-2008.10
62
PROFESSIONAL
2011 - APRIL
push pull - Art. 2008 - 2008.10 - 2009 - 2010
ACCESSORIES And consumables for cebora push pull torch.
ART.
DESCRIPTION
per/for Art.
1859
Swan neck. Duty cycle 350A at 60%.
2008-2008.10
2009-2010
1937
Small teflon wire guide liner for swan neck.
1859
1938
Small brass spiral wire guide liner for swan neck.
1859
1939
Kit for aluminium wires consisting of:
-6.2 m PA-CARBON wire guide liner (Art. 1945). -Small teflon wire guide liner for swan neck (Art. 1937).
-6 wire guide pipes.
2008-2008.10
2009-2010
1943
Kit for Fe/stainless steel/cored wires consisting of: -6.2 m spiral wire guide liner (Art. 1946).
-Small brass spiral wire guide liner for swan neck (Art. 1938).
2008-2008.10
2009-2010
1945
6.2 m PA-CARBON wire guide liner.
1946
6.2 m spiral wire guide liner
1971
Contact tip Ø 0.8 for Fe/stainless steel/cored wire/CuSi3-AlBz8 (10 pcs.).
1859
1972
1859
1973
1859
1974
1859
1975
Contact tip Ø 0.8. for Aluminium (10 pcs.).
1859
1976
1859
1977
1859
1978
1859
1959
Gas diffuser Ø 0.8.
1859
1828
1859
2011 - APRIL
2008-2008.10
2009-2010
2008-2008.10
2009-2010
PROFESSIONAL
63
spot 2500
MULTI-PURPOSE SPOTTER FOR BODY SHOPS
Art.
S
2148
Specifications
415V 50 Hz
± 10%
Three phase input
10 A
6.0 Kw
Max. installed power
3000 A max.
Current range
IP 23 S
Protection class
30 Kg
Weight
207x437x411H
Dimensions mm
ART.
DESCRIPTION
2148
Syncronous electronic regulation multipurpose power source. Comes with work return lead (mt.2 - 50 mm2), cable with spot
gun (mt. 2.5 - 50 mm2), multipurpose slide hammer to be fitted on the gun, box with set of accessories and consumables.
1432
consumables and accessories
ART.
DESCRIPTION
2290
Sliding hammer with handgrip.
2293
Hammer head for washer traction.
2295
Hammer head for pin traction.
2296
Spot weld electrode for Ø 3 and Ø 5 rivets.
2297
Spot weld electrode for washers.
2298
Spot weld electrode for M4 screws and Ø 2 - Ø 2.5 pins.
64
PROFESSIONAL
2011 - APRIL
power spot 5600
SPOTTER FOR BODY SHOPS
Art.
E
S
2154
Specifications
240V 50/60 Hz
± 10%
Single phase input
10 A
50 ÷ 1500 J
Energy adjustment range
IP 23S
Protection class
15 Kg
Weight
176x370x401H
Dimensions mm.
ART.
DESCRIPTION
2154
Single-phase capacitor discharge power source for welding rivets on all kind of sheet metal (iron, stainless steel, aluminium).
Comes with gun, earth cable and accessories bag (wrench, rivet mandrels, synthetic steel wool, 1 conf.
Art. 2318, 2333 and 2334).
1432
consumables and accessories
ART.
DESCRIPTION
2318
M4x15 threaded rivets. Aluminium. Package of 100 pieces.
2333
Special washers. Package of 5 pieces.
2334
3 pin spacer.
2011 - APRIL
PROFESSIONAL
65
NOte
66
2011 - APRIL
NOte
2011 - APRIL
67
2 Hollylea Road, Leumeah, NSW, Australia 2560
Phone: 1800 CEBORA; 1800 232 672
www.cebora.com
CEBORA AUSTRALIA RESERVES THE RIGHT OF MODIFYING THE TECHNICAL SPECIFICATIONS OF THE PRODUCTS INCLUDED IN THIS CATALOGUE WITHOUT NOTICE.

Product List April 2011 Eng LoRes

Transcription

Similar documents

Depliant-TRI STAR MIG 1636 M Art 298-C265-R2.indd

sound mig 3840/T sTar pulse inVerTer

298 TRI STAR MIG 1636/M MIG-MMA-TIG

CATALOGO GENERALE GENERAL CATALOGuE hAupTkATALOG

Prospekt Deutsch - MTP, Mig-Tig

Product Catalogue 4.0

Abicor Binzel

Product Catalogue 3.0