General Purpose Centrifugal Fan, Model US

Transcription

General Purpose
Centrifugal Fan,
Model US
TABLE OF CONTENTS
3
Introduction, Certifications & Listings
4
Features & Benefits
5
Options & Accessories
7
Heat & Smoke and
Fatrap Configurations
8
Unipak and Unipak Fatrap
9
General Purpose Utility Fans
10 Unipak Fatrap Curb Mount Restaurant Exhauster
11 Discharge Positions & Dimensions
12 Motor Selection
14 Belt Drive Dimensional & Performance Data
26 Sound Power Levels, Sone Ratings
& Sound Classification Guide
27 Sound Power Data
30 Engineering Specifications
YORK® GENERAL PURPOSE CENTRIFUGAL FAN, MODEL US
INTRODUCTION
Utility Set
US centrifugal fans are SWSI, Class I, Arrangement 10 general
purpose air moving devices. They are used for supply or exhaust
applications in commercial, institutional, and industrial HVAC
systems.
At the heart of the unit is a computer designed, backward inclined,
centrifugal wheel. This heavy duty non-overloading aluminum
wheel (steel for heat and smoke removal) assures low noise and
high efficiency performance.
The fan wheel, venturi inlet, housing, and frame are engineered
to provide maximum performance and reliability.
Fan housings utilize heavy-gauge materials and employ welded
construction. Motors and all drive components have been
carefully engineered and tested for durability and performance.
A wide range of accessories are available to meet various
application requirements.
Model US centrifugal blowers are designed and built to provide
the end user with a highly efficient and extremely reliable air
moving unit. These units offer many features as standard
equipment that other manufacturers consider options. Each unit
is fully assembled, factory set at the specified RPM, and test run
prior to shipment.
Model: US
• Static Pressure up to 5” wg.
• Belt Drive - Flow Capacity up to 36,000 CFM
CERTIFICATIONS & LISTINGS
AMCA Certification
YORK® by Johnson Controls certifies that the
US models contained herein (excluding model
US44) are licensed to bear the AMCA Seal. The
ratings shown are based on tests and procedures
performed in accordance with AMCA Publication
211 and AMCA Publication 311 and comply with
the requirements of the AMCA Certified Ratings
Program.
UL and cUL Certification
Standard US fans carry the UL label, UL705
(ZACT/ZACT7), file #E28413.
US fans with “Fatrap” configuration carry
the UL label, UL762 (YZHW/YZHW7), file
#MH10684.
US fans with the heat and smoke removal
option carry the UL label, UL793 (ZAXH/
ZAXH7), file #MH19473.
3
FEATURES & BENEFITS
Self Aligning Pillow Block Bearings
Bearings are sized for a minimum L50 life exceeding 200,000
hours of operation. They require no maintenance other than
periodic lubrication. Standard Zerk lube fittings allow for ease
of lubrication. Extended lube lines are available as an option to
facilitate lubrication when a weather cover is used.
Solid Steel Shafts
Sized to withstand a minimum of 125% of maximum catalogued
operating speed, shafts are precision ground, polished, and
treated for rust resistance.
Durable Housings
US blowers are manufactured of heavy gauge zinc coated
galvanized steel to insure a long, corrosion resistant life.
Galvanized steel resists rust and will help maintain the unit’s
integrity even in environments such as coastal regions where
salt air will rapidly deteriorate black iron, even when it is painted.
Typical Drive, Shaft, and Bearings Assembly
Versatile Operation
Spark Resistant Aluminum Wheels
All unit sizes are field rotatable to any of eight discharge positions.
Both clockwise and counter-clockwise rotations are available.
Motors and Drives
The motors and belt drives are pre-set at the factory to the
specified RPM. These drives allow for system balancing in the
field. All pulleys are sized for at least 150% of driven horsepower.
High quality, open drip proof motors are standard. Totally
enclosed, explosion proof, and two speed motors are available.
Heavy Duty Support Frame
The heavy duty support frame provides a strong structural
foundation for the motor and drive assembly, as well as rigid
reinforcement for housing members.
Standard Gasketed Access Door
The standard gasketed access door enables easy maintenance
of internal components.
Inlet Angle Flange
The inlet angle flange is standard to facilitate connection to the
duct work.
4
US blowers use our computer designed, aluminum wheel. They
are backward inclined and non-overloading, using heavy gauge
aluminum to provide AMCA “C” spark resistant construction.
AMCA “B” construction is available as a moderate cost option.
This wheel design provides a high level of static efficiency while
reducing start-up torque, thus extending drive component life.
All wheels are statically and dynamically balanced for quieter
operation.
Steel Wheel (Heat & Smoke Removal)
The wheel is a standard duty, all welded wheel (standard duty
and high pressure belt drive). The blades are curved for improved
air performance while increasing their strength and rigidity. The
wheel assembly is fully welded to provide extremely durable and
consistent performance. The wheel is dynamically balanced.
Balancing weights are mechanically attached to the inside of the
rims of both the back plate and wheel inlet. This allows a precise
placement of the weights anywhere within a full 360° range on
two separate planes, without the possibility of detachment.
Integral Lifting Lugs
All units come standard with integral lifting lugs. These are built
into the back support structure of the scroll housing and can be
used with or without the weather cover installed.
OPTIONS & ACCESSORIES
Finishes
Extended Lube Lines
Coatings, such as Polyester Powder Coat, Epoxy Powder Coat,
Phenolic Epoxy Powder Coat, and others are available. See the
coatings brochure for details.
Preloaded at the factory, lube lines allow bearing maintenance
when a weather cover is installed or when easy access to the
bearings is unavailable.
Drain Connections
Spark-Resistant Construction
Drains are made of 2” pipe which is mechanically fastened and
sealed to prevent leakage at the lowest point of the scroll. All fans
can be supplied with drains except bottom horizontal discharge,
where it is not required.
AMCA “C” and “B” construction are available. AMCA standards
offer the following definitions and notes concerning sparkresistant construction:
Dampers
Dampers can be installed at the discharge outlet to prevent
backdrafts when fans are not in operation. Dampers can be used
when outlet velocities do not exceed 4000 FPM for all discharge
positions. Gravity dampers are not effective for use in topangular-down, bottom-angular-down or down blast discharge
positions.
Variable Inlet Vanes
Also known as vortex dampers, vanes provide efficient regulation
of fan output over all operating ranges with substantial increases
in energy efficiency when full fan output is unnecessary. This
accessory is suitable for inlet temperatures up to 200ºF. (Not
available for US10.)
Vibration Isolators, Hangers, and Rails
These items are available in both rubber-in-shear and springtype to mitigate residual vibration transmission. All isolators are
properly sized to the unit. Floor flex pads are also available.
Safety Switches
Switches in housings are available to turn fans on and off for
service only. Field wiring is required.
C. The fan shall be so constructed that a shift in the impeller or shaft will not permit two ferrous parts of the fan to rub or strike.
B. The fan shall have a non-ferrous impeller and non-ferrous
ring about the opening through which the shaft passes.
Ferrous hubs, shafts and hardware are allowed provided
construction is such that a shift in impeller or shaft will not
permit two ferrous parts of the fan to rub or strike. Steps must
also be taken to insure that the impeller, bearings and shaft
are adequately attached and/or restrained to prevent a lateral
or axial shift in these components.
Notes:
1. No bearings, drive components or electrical components shall be placed in the
air or gas stream unless they are constructed or enclosed in such a manner that
failure of that component cannot ignite the surrounding gas stream.
2. The user shall electrically ground on all fan parts.
3. For this standard, non-ferrous material shall be material with less than 5% iron
or any other material with demonstrated ability to be spark-resistant.
4. The use of aluminum or aluminum alloys in the presence of steel which has been
allowed to rust required special consideration. Research by the U.S. Bureau of
Mines and others has shown that aluminum impellers rubbing on rusty steel may
cause high-intensity sparking.
The use of the above standard in no way implies a guarantee
of safety for any level of spark resistance. Spark-resistant
construction does not protect against ignition of explosive gases
caused by catastrophic failure or from any airstream material that
may be present in a system.
Arrangement 10 Single Width, Single Inlet
Fans are constructed with the motor and bearings out of the
airstream. Motors are mounted inside of the pedestal on an
adjustable motor plate. This arrangement allows for the use
of a weather cover and can be used in ducted or non-ducted
applications.
These fans are one component of a system. As such, fan performance is directly
effected by that system. It is critical that system designers determine the actual
system losses to ensure that the actual flow is as specified in the system design.
5
OPTIONS & ACCESSORIES
An extensive selection of accessory items to cover various
application requirements is available at additional cost.
Inlet and Outlet Guards
Inlet and Outlet Guards provide safety in non-ducted installations.
Guards are constructed of expanded steel in a removable
frame attached to the fan housing. They are easily removed by
maintenance personnel for cleaning or inspection.
Ventilated Weather Cover
The weather cover protects the shaft, bearings, motor and drive
components from weather and other detrimental conditions.
Galvanized steel covers are easily removed and reinstalled
with thumb screws, requiring no tools. On larger sizes, the
cover incorporates a removable end panel for easy access to
drive components without removing the entire cover. Weather
covers also act as drive guards to protect personnel and drive
assemblies.
Flanges
Outlet flanges facilitate the connection of duct work. Companion
flanges are also available when the unit is connected to duct
work by a transition section. The companion flange fits the fan to
the transition and guarantees proper sizing.
Access Door
While a gasketed access door is standard, an optional quick
release type door is available to allow for periodic inspection and
cleaning.
Support Angles
Heavy gauge angles, appropriately sized by unit, mean easy
assembly mounting to support surface.
Gasketed Access Door (Standard)
Quick Release Door (Optional)
Outlet Flange (Optional)
Backdraft Damper (Optional)
Weather Cover (Optional)
Duct and Transition
Companion Flange (Optional)
Vibration and Isolation Mounts (Optional)
Support Angles (Standard for D18 and Up)
6
Inlet Guard (Optional)
Inlet Angle Flange (Standard)
US HEAT & SMOKE CONFIGURATION
UL Power Ventilator for Smoke Control
The Heat and Smoke (-HS) option provides a superior option for smoke control. The UL smoke control listing references UL705,
UL793, Industrial Risk Insurers (IRI), and Southern Building Code Congress International (SBCI). The UL standard requires the
fan to run at 500°F for 4 hours (IRI) and 1000°F for 15 minutes (SBCCI). YORK® by Johnson Controls Heat and Smoke Removal
configured units are listed at 500°F for 4 hours and 1000°F for 41 minutes. The additional 26 minutes at 1000°F will buy precious
time in the event of a fire. The –HS option is available for all sizes offered.
FATRAP CONFIGURATION
Our fans can be specially configured for food service applications with the addition of a group of accessories that either meets a
requirement or eases installation requirements according to NFPA 96. NFPA 96 “Standard for Ventilation Control and Fire Protection of
Commercial Cooking Operations” is the generally recognized authority nationwide for restaurant installation requirements. However,
local codes may vary.
This special configuration is called a “Fatrap.” Fatrap configured fans are ideal for use in commercial kitchens over grills, charcoal
broilers, deep fat fryers, steam tables, ranges, dishwashers, and other appliances.
UL 762 Listing
Grease Collector / Separator Box
Fatrap configured units are listed at 500°F, which is 200°F higher
than UL requirements and is the highest in the industry.
Designed for easy installation, the grease is routed from a single
swiveling collection spout to an amply sized durable galvanized
steel box, trapping grease and residue, and avoiding discharge
onto the roof surface. Additionally, these boxes separate the
water from the grease, prolonging the time required between
periodic maintenance.
US Unipak fans consist of a standard up blast US unit attached
to a fully welded inlet plenum and mounted on a curb cap. The
resulting curb mounted assembly provides a unique solution to
restaurant grease exhaust applications and is UL762 listed. The
Inlet plenum is equipped with a triple sealed removable access
panel which allows cleaning of the fan and duct work without
removal or hinging. This eliminates potential roof or fan damage
caused by cleaning crews. All unwelded mating surfaces (to allow
for service) are sealed with high temperature, UV rated silicone.
The high velocity discharge of the exhaust air stream helps to
disperse contaminants away from the restaurant and minimize
the cloud that sometimes forms as a result of high volume, intense
cooking. The high static pressure capability of these heavy duty
blowers (sometimes greater than 5” w.g.) makes them ideal for
long, complicated duct runs or for use with specialized filtration
equipment. An easily removable weather cover allows access to
motors, belts, bearings, etc., for inspection or maintenance.
Unipak units are available in sizes US10DPFT, US13DPFT,
US16DPFT, US20DPFT and US24DPFT. For performance data,
refer to the corresponding units shown on pages 14 through 22.
Ventilated Curbs
NFPA 96 requires the use of ventilated mounting curbs to provide
an approved arrangement for connecting a range hood and
duct work to the roof fan for buildings two stories or higher. Our
ventilated mounting curbs, 18” high, comply with that standard
when properly installed. Ventilated curbs have a flat mounting
flange for fastening directly to the roof deck. This flange should
be securely fastened and flashed to ensure weather-tightness.
Ventilated pedestals are designed to fit on an existing curb. They
provide cap flashing when so installed.
Pre-Wired Junction Box
A weather-proof junction box is factory wired and mounted to
the housing exterior. An appropriately sized disconnect switch
is commonly selected as an additional option. These items meet
the code requirements for positive electric shut-off.
7
UNIPAK & UNIPAK FATRAP
Curb Mounted Utility Set
with Integral Inlet Box
Unipak Fatrap Configuration
Unipak
Unipak Fatrap
Includes all the features of the US blower PLUS
Includes all the features of the US blower PLUS
Integral Galvanized Curb Cap
• Eliminates need for costly customized field fabricated
transition.
• Fully welded corners.
• Pre-punched mounting holes.
UL 762 Listing
• Rated at 500ºF, highest in the industry.
Pre-Wired Weatherproof Junction Box
Fully Welded Inlet Box
• Includes gasketed removable access cover with quick release
latches.
• Allows easy duct cleaning and inspection.
Grease Collector
• Separates the water from the grease.
• Amply sized.
• Longer time required between cleaning.
• Collects from a single swiveling collection spout.
Vented Weather Cover Provided as Standard
• Allows full access for normal maintenance.
Ventilated Curbs (Optional)
• Available to comply with NFPA96.
High Temperature Sealant Provided
Between Scroll Casing and Side
Integral Galvanized Curb Cap
• Eliminates need for costly customized field fabricated
transition.
• Fully welded corners.
• Pre-punched mounting holes.
High Velocity Discharge
• Throws contaminants further into the atmosphere.
• Reduces possibility of contaminant collection on roof.
Available for US Models
• US10DP, US13DP, US16DP, US20DP and US24DP.
Typical Applications
• Laboratory hoods.
• Industrial process ventilation.
• Dry cleaning.
Fully Welded Inlet Box
• Includes gasketed removable access cover with quick release
latches.
• Allows easy duct cleaning and inspection.
Vented Weather Cover Provided as Standard
• Allows full access for normal maintenance.
High Temperature Sealant Provided
Between Scroll Casing and Sides
High Velocity Discharge
• Throws contaminants further into the atmosphere.
• Reduces possibility of contaminant collection on roof.
8
Available for US Models
• US10DPFT, US13DPFT, US16DPFT, US20DPFT and
US24DPFT.
GENERAL PURPOSE UTILITY FANS
O
D
F
E
2
3
P
4
2
1
11
12
K
N
9
H
M
C
Q
6
5
7
7
J
1
8
B
ANGLE SUPPORTS
UNIT SIZES 18 & UP
R
10
S
L
A
1.
2.
3.
4.
5.
6.
Blower Scroll Housing
Outlet Duct Flange (optional)
Centrifugal Wheel (aluminum non-overloading)
Spun Inlet with Cutoff (size US16 and up)
Ball Bearing Motor
Belt and Pulleys (where required twin groove belts and
pulleys will be provided)
Unit Wheel
Size Dia.
Shaft
Dia.
A
B
C
D
E
Outlet
7.
8.
9.
10.
11.
12.
Drive Frame Support Assembly
Adjustable Motor Mounting Plate
Fan Shaft and Bearings
Support Legs with Mounting Holes
Belt and Bearing Enclosure (optional)
Inlet Angle Flange
Inlet
H
J
L
M
N
O
P
Q
R
S
Mgt.
Ship
Hole
Wts.
Dia.
F
K
10
11 1/4
3/4
24
14 1/2 22 1/2
1 1/4
18 1/2
8 1/4
11 1/4
11 1/4
15 1/2
14
28 3/8
12 7/8
20
8 5/8
1 1/2
10
22 3/4
1/2
130
12
12 7/8
3/4
26 1/8
14 1/2 25 1/4
1 1/4
18 1/2
10 3/8
12
13
17
16
31 1/2
14 1/2
21 1/2
9 3/8
1 1/2
13
24 7/8
1/2
136
13
13 5/8
1
26 1/4
14 1/2 26 1/2
1 1/4
18 1/2
10 1/2
14 3/8
14
18
17 1/4
33 5/8
15 3/4
23 5/8
10 1/4
1 1/2
14
25
1/2
140
15
15 7/8
1
30 3/8
16
29 5/8
1 1/4
20 1/2
11 5/8
15 3/4
15 3/4
20
19 1/4
37 7/8
17 7/8
26 3/8
11 5/16
1 1/2
15
29 1/8
1/2
176
16
16 3/8
1 3/16
30 1/4
16
32 3/8
1 1/4
20 1/2
12 3/4
17 1/2
17 1/4
22
20 3/4
41 5/8
19 5/8
29 1/8
12 1/4
1 1/2
16
28 3/4
1/2
194
18
18 1/2
1 3/16
33 1/2
17 7/8 35 1/4
1 1/2
23 1/2
14 1/8
19 3/8
19
24
22 1/2
45 5/8
21 5/8
32 3/8
13 7/8
1 1/2
18
32
1/2
274
20
20
1 3/16
36 1/4
20
37 5/8
1 1/2
28 1/2
14 3/4
21 3/4
20 1/2
25 1/2
24 1/4
48 1/2
23
34 1/2
14 13/16
1 1/2
20
34 3/4
5/8
312
22
22 7/8
1 3/16
38 1/2
20
43
1 1/2
28 1/2
17
23 9/16
24
28 3/4
28
54
25 5/16
37 5/8
16
1 1/2
24
37
5/8
351
24
24 5/8
1 7/16
40 1/2
20
46
1 1/2
28 1/2
19
26
25
31 1/2
29
59 3/8
27 5/8
40 7/8
17 1/4
1 1/2
24
39
5/8
462
30
30 5/8 1 11/16
50 3/8
25
56 1/2
1 3/4
35 1/8
23 1/8
31 13/16
31 1/2
38
37
72 1/2
34 5/8
51 1/2
21 7/8
2
30
46 3/8
5/8
875
36
36 7/8
55 1/2
25
66 3/8
1 3/4
35 1/8
28 1/4
38 9/16
41 1/8
44
44 3/4
82 1/4
38 1/4
59 1/8
25 7/8
2 3/8
34
51 1/2
5/8
1250
44
45
3 1/4 36 5/16 35 1/2
46 13/16
46
52 1/4
58 11/16
99
46 3/4
79 7/8
37 1/2
3 3/4
52 1/2
61 7/8
1/2
2700
2
2 11/16 64 13/16 25 3/8
78
*Shipping weights include standard motors, drives, and weather cover.
All dimensions in inches. All weights are in pounds and will vary depending on motor selection and accessories used.
9
UNIPAK (FATRAP) CURB MOUNT RESTAURANT EXHAUSTER
6
1
10
11
5
9
S
INSIDE
T
INSIDE
3
1
10
6
D
2
4
8
7
5
9
F
E
13
18"
12
13
4"
14
14
15
C INSIDE
G
A
B
INSIDE
1.
2.
3.
4.
5.
6.
7.
8.
Blower Scroll Housing - Upblast Discharge
Ball Bearing Motor
Fan Shaft and Bearings
Belt and Pulleys
Curb Cap Mounting Base
Vented Weather Cover
Grease Drain Trough and Downspout (Fatrap only)
Hinged and Latched Access Door
9. Continuously Welded Plenum
10. Positively Sealed Access Door with Adjustable Tension Latches
11. Disconnect Switch Box
12. Vented Prefabricated Steel Curb (optional)
13. Grease Collection Box (optional)
14. Welded Exhaust Duct (by others)
15. Roof Structure (by others)
Model
Wheel Dia.
Shaft Dia.
A
B
C
D
E
F
G
S
T
US10DP
11 3/4
3/4
14 1/4
26 1/8
52 1/8
24 1/8
18 1/2
5
6
8 1/4
11 1/4
US13DP
13 5/8
1
17 1/2
28 1/8
56 1/8
33 5/8
18 5/16
5
5 3/16
10 1/2
14 3/8
US16DP
16 3/8
1 3/16
21
34 1/8
68 1/8
41 5/8
21 7/8
6
6 5/8
12 3/4
17 1/2
US20DP
20
1 3/16
24 1/2
36 5/8
76 1/2
48 1/2
25 5/16
6
7 13/16
14 3/4
21 3/4
US24DP
24 5/8
1 7/16
28 3/4
43 7/8
87 7/8
59 3/8
24 3/4
6
7 7/16
19
26
All dimensions in inches.
10
DISCHARGE POSITIONS & DIMENSIONS
Rotational Designations*
Clockwise Rotation - CW
G
P
N
T
J
J
U
CW(TH)90
P
Z
V
W
V
Z
X
J
J
X
G
W
J
J
CW(TAD)135
G
N
CW(DB)180
CW(BAU)315
U
V
J
CW(BH)270
X
T
P
U
* Units will be supplied in the CW90(TH)
position unless otherwise specified.
U
CW(BAD)225
Z
N
W
TH - Top Horizontal
BH - Bottom Horizontal
TAD - Top Angular Down
UB - Up Blast
DB - Down Blast
TAU - Top Angular Up
BAD - Bottom Angular Down
BAU - Bottom Angular Up
T
J
CW(UB)360
CW(TAU)45
N
T
Counterclockwise Rotation - CCW
P
G
V
W
N
Z
X
T
G
W
J
J
J
U
J
CCW(TH)90
CCW(TAD)135
U
CCW(DB)180
CCW(BAD)225
G
P
V
W
Z
Z
U
Unit Size
CCW(BAU)315
G
J
P
10
11 5/16
15 1/2
12
12 7/16
17
13
13 3/4
18
15
15 3/8
20
16
16 11/16
22
18
18 1/2
24
13 7/8
20
20
25 1/2
22
21 7/8
28 3/4
24
23 15/16
30
36
U
V
J
J
CCW(BH)270
N
P
X
J
Z
N
CCW(UB)360
T
U
8 11/16
12 1/4
9 3/8
13 7/16
10 5/16
J
CCW(TAU)45
V
W
X
Z
2 7/8
15 1/8
10 3/8
8 9/16
9 7/16
3 1/4
16 9/16
11 3/8
9 3/8
10 3/8
14 7/8
3 3/4
18 5/16
12 5/8
10 5/16
11 1/2
11 5/16
16 5/8
4 7/16
20 3/8
14 1/16
11 1/2
12 13/16
12 5/16
18 3/16
4 7/8
22 1/4
15 7/16
12 5/8
14
20 1/16
5 3/16
24 3/4
17
13 7/8
15 7/16
14 13/16
21 5/8
5 11/16
26 11/16
18 5/16
15
16 5/8
16 1/16
23 11/16
6 7/16
29 1/8
20 1/16
16 3/8
18 1/4
3 11/2
17 1/4
26
7 5/16
31 11/16
21 7/8
17 13/16
19 7/8
29 49/64
38
21 13/16
32 17/64
8 63/64
39 27/32
27 17/64
22 1/4
24 49/64
33 1/2
44
25 7/8
36
8 3/4
45 3/8
31
25 31/32
28 15/32
Rotation & Discharge
Dimensions
The direction of rotation is determined
from the drive side of the fan. On
single inlet fans, drive side is always
considered as the side opposite the
fan inlet. Direction of discharge is
determined per diagrams shown.
Angle of discharge is referred to the
vertical axis of the fan and designated
in degrees.
All dimensions in inches.
11
MOTOR SELECTION
Motor Frame Size
Single Phase
HP
Open Drip Proof
115V
230V
200V, 230V, 460V or 575V Three Phase
TE
115/230
Explosion
Proof
2 Speed
2 WDG
Open
Drip Proof
TE
Explosion
Proof
2 Speed
2 WDG
1/4
48
48
48
48 / 56
48
48
48
48
–
1/3
48 / 56
48 / 56
56
56
56
56
56
56
–
1/2
48 / 56
48 / 56
56
56
56
56
56
56
56
3/4
56
56
56
56
56
56
56
56
56
1
56
56
56
56
56
56
56
56
145T
1 1/2
56
56
145T
184T
–
56
56
56
182T
182T
2
145T
145T
182T
182T
–
56 / 145T
145T
145T
3
184T
184T
184T
215T
–
56 / 145T
182T
182T
184T
5
–
–
–
–
–
184T
184T
184T
215T
7 1/2
–
–
–
–
–
213T
213T
213T
215T
10
–
–
–
–
–
215T
215T
215T
256T
284T
15
–
–
–
–
–
254T
254T
254T
20
–
–
–
–
–
256T
256T
256T
284T
25
–
–
–
–
–
284T
284T
284T
286T
380V/3Ph/50Hz motors are available. On horsepowers less than 1, motor frame sizes may change due to variations in voltage, special features, and motor manufacturer.
Motors shown are ball bearing, continuous duty, 1750 RPM or 1750/1140 RPM for two speed, two winding motors.
Belt Drive Losses
30
DRIVE LOSS
(% MOTOR POWER OUTPUT)
The AMCA Review Committee has developed the chart
shown below for the purpose of estimating belt drive losses.
To calculate total BHP (including drive losses): Find the
BHP of your operating point on the x‑axis on the graph
below. Follow the vertical line to the curves indicating
the range of drive losses. Look at the y-axis on the left
and find the drive loss percentage. Calculate the total BHP
by adding the drive loss to the operating point BHP.
For BHP’s below 0.3, use 30%.
20
15
10
8
6
4
3
2
1.5
1
0.3 0.4
0.6 0.8 1
2
3
4
6
8 10
MOTOR POWER OUTPUT (BHP)
20
Range drive loss for standard belts. Higher fan speeds
tend to have higher drive losses than lower fan speeds
at the same horsepower.
For totally enclosed, explosion proof, multi-speed and all 1.0 Service Factor
motors, fan BHP plus drive losses should not exceed motor rated HP.
Graph reprinted from AMCA publication 203, with the express written permission
from the Air Movement and Control Association, Inc., 30 West University Drive,
Arlington Heights, IL 60004-1983.
12
MOTOR SELECTION
Single Phase
HP
115V
208V
230V
1/6
4.4
2.4
2.2
1/4
5.8
3.2
2.9
1/3
7.2
4.0
3.6
1/2
9.8
5.4
4.9
3/4
13.8
7.6
6.9
1
16.0
8.8
8.0
The values of full-load currents, shown on the left, are for
motors running at usual speeds and motors with normal torque
characteristics. Motors built for especially low speeds or high
torques may have higher full-load currents, and multi-speed
motors will have full-load current varying with speed, in which
case the nameplate current ratings shall be used.
The voltages listed are rated motor voltages. The currents listed
shall be permitted for system voltage ranges of 110 to 120 and
230 to 240 volts.
The table data shown on the left is from the NEC 2005 edition,
table 430-148.
Three Phase
HP
208V
230V
460V
1/2
2.4
2.2
1.1
3/4
3.5
3.2
1.6
1
4.6
4.2
2.1
1 1/2
6.6
6.0
3.0
2
7.5
6.8
3.4
3
10.6
9.6
4.8
5
16.7
15.2
7.6
7 1/2
24.2
22
11
10
30.8
28
14
15
46.2
42
21
20
59.4
54
27
25
74.8
68
34
The values of full-load currents, shown on the left, are typical for
motors running at speeds usual for belted motors and motors
with normal torque characteristics. Motors built for low speeds
(1200 RPM or less) or high torques may require more running
current, and multi-speed motors will have full-load current
varying with speed, in which case the nameplate current ratings
shall be used.
The voltages listed are rated motor voltages. The currents listed
shall be permitted for system voltage ranges of 230 to 240 and
440 to 480 volts.
The table data shown on the left is from the NEC 2005
edition, table 430-150.
The amperages given here are approximate values only and represent averages compiled from the tables of leading motor
manufacturers. Overload relay heaters should not be selected on the basis of these tables only. Heaters must be selected in
accordance with the actual motor current as shown on the nameplate. It is also important that ambient temperatures of the area in
which the motor control is located be taken into consideration when making heater selections. Ambient compensated overload relays
are available for abnormal temperature conditions.
On most Belt Drive YORK® by Johnson Controls roof exhausters, the motor synchronous speed is 1800 RPM.
13
US10 | BELT DRIVE
20
9.0
Do not select shaded area.
18 1/2
8 5/8
RPM
BHP
7.0
11 1/4
12 7/8
3800 RPM
6.0
3600 RPM
11 1/4
28 3/8
3200 RPM
5.0
1 1/2
3000 RPM
4.0
2800 RPM
2600 RPM
2400 RPM
2200 RPM
2.0
2000 RPM
1800 RPM
1500 RPM
1.0
1200 RPM
800 RPM
0.0
0
400
800
15 1/2
P
1231
1385
1538
1692
1846
2000
2154
2308
2462
2615
2769
2923
3077
3231
H
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
1
3/4 HP
H
HP P
10
14
1200
1600
AIR FLOW - CFM
Max BHP: (RPM/2485)3
.25” SP
RPM
949
1063
1176
1291
1412
1537
1664
1793
1923
2055
2191
2325
2461
2598
2734
2871
3009
3146
3284
3422
BHP
0.056
0.076
0.100
0.130
0.169
0.219
0.278
0.348
0.429
0.524
0.634
0.759
0.900
1.059
1.234
1.429
1.645
1.880
2.138
2.419
2.25 SP "
RPM
2179
2270
2358
2448
2541
2641
2743
2847
2958
3072
3188
3301
3414
3527
BHP
0.579
0.671
0.779
0.900
1.032
1.174
1.330
1.502
1.668
1.846
2.041
2.247
2.468
2.704
2000
BHP
0.089
0.119
0.155
0.193
0.237
0.289
0.349
0.418
0.503
0.603
0.716
0.844
0.987
1.147
1.324
1.523
1.743
1.984
2.247
2.533
2.50” SP
RPM
2265
2348
2438
2526
2617
2713
2814
2916
3021
3134
3248
3364
3477
3589
2400
2800
Outlet Area: 0.65 Sq. Ft.
.50” SP
RPM
1137
1232
1335
1447
1561
1674
1790
1907
2030
2156
2282
2410
2539
2669
2799
2933
3068
3203
3339
3475
ANGLE
SUPPORTS
UNIT SIZES
18 & UP
P
OV
(FPM)
1/2
H
CFM
P
769
923
1077
1231
1385
1538
1692
1846
2000
2154
2308
2462
2615
2769
2923
3077
3231
3385
3538
3692
2
1/
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
H
OV
(FPM)
1
CFM
22 1/2
3
3.0
Maximum RPM: 3615
BHP
0.644
0.735
0.846
0.972
1.112
1.262
1.424
1.601
1.796
1.981
2.181
2.398
2.626
2.869
.75” SP
RPM
1293
1381
1474
1575
1681
1795
1909
2022
2137
2254
2372
2496
2622
2748
2876
3004
3133
3263
3393
3526
BHP
0.123
0.159
0.202
0.251
0.308
0.367
0.434
0.510
0.596
0.693
0.802
0.935
1.085
1.250
1.434
1.635
1.855
2.096
2.358
2.647
2.75” SP
RPM
2356
2423
2514
2602
2691
2783
2882
2983
3086
3193
3306
3420
3536
-
BHP
0.719
0.799
0.913
1.046
1.190
1.351
1.519
1.702
1.902
2.115
2.321
2.542
2.783
-
Wheel Diameter: 11 1/4”
1” SP
RPM
1429
1513
1602
1694
1794
1898
2010
2125
2238
2351
2466
2583
2701
2823
2948
3074
3201
3328
3456
3585
BHP
0.162
0.199
0.248
0.306
0.370
0.445
0.520
0.605
0.698
0.801
0.916
1.045
1.186
1.353
1.542
1.749
1.976
2.222
2.489
2.779
3” SP
RPM
2497
2585
2674
2763
2853
2948
3048
3150
3254
3362
3476
3590
-
BHP
0.867
0.983
1.118
1.270
1.436
1.615
1.804
2.010
2.236
2.462
2.692
2.936
-
1.25” SP
RPM
1627
1717
1806
1899
2000
2103
2213
2328
2443
2555
2669
2784
2901
3019
3141
3266
3391
3518
-
BHP
0.241
0.295
0.359
0.431
0.512
0.604
0.698
0.800
0.912
1.034
1.168
1.316
1.479
1.656
1.864
2.096
2.347
2.622
-
3.50” SP
RPM
2657
2719
2810
2899
2988
3078
3172
3272
3374
3477
3582
-
BHP
1.031
1.125
1.268
1.430
1.608
1.801
2.009
2.227
2.465
2.720
2.991
-
14 1/2
22 3/4
24
Tip Speed: 2.95 X RPM
1.50” SP
RPM
1744
1821
1911
2000
2094
2195
2298
2408
2522
2639
2750
2863
2978
3094
3211
3329
3452
3577
-
BHP
0.293
0.343
0.412
0.491
0.58
0.677
0.787
0.901
1.020
1.154
1.294
1.448
1.618
1.802
2.002
2.219
2.474
2.754
-
4” SP
RPM
2857
2935
3027
3114
3203
3294
3387
3487
3589
-
Performance shown is for installation type B - Free Inlet, Ducted Outlet. Power rating (BHP) does not include drive losses.
Performance ratings do not include the effects of appurtenances in the airstream. All dimensions in inches.
14
1 1/4
8 1/4
2
STATIC PRESSURE - Inches W.G.
8.0
BHP
1.291
1.424
1.592
1.780
1.986
2.209
2.445
2.693
2.962
-
Max Motor Frame Size: 145T
1.75” SP
RPM
1917
2007
2095
2186
2282
2383
2487
2596
2710
2826
2939
3051
3165
3281
3397
3515
-
BHP
0.393
0.465
0.550
0.647
0.752
0.868
0.998
1.129
1.268
1.420
1.583
1.757
1.947
2.156
2.378
2.621
-
4.50” SP
RPM
3056
3143
3234
3322
3411
3502
3596
-
BHP
1.589
1.759
1.955
2.172
2.406
2.659
2.927
-
2”SP
RPM
2017
2096
2185
2274
2365
2464
2565
2669
2779
2894
3009
3122
3235
3348
3463
3579
-
BHP
0.453
0.522
0.611
0.713
0.827
0.950
1.085
1.235
1.385
1.544
1.716
1.900
2.098
2.310
2.540
2.788
-
5” SP
RPM
3186
3255
3345
3435
3523
3613
-
BHP
1.785
1.932
2.134
2.359
2.605
2.871
-
US12 | BELT DRIVE
21 1/2
7.0
3000 RPM
2800 RPM
5.0
10 3/8
1 1/4
RPM
BHP
14 1/2
12
2600 RPM
4.0
H
P
2
1/
2
H
1
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
814
930
1047
1163
1279
1395
1512
1628
1744
1860
1977
2093
2209
2326
2442
2558
2674
2791
2907
3023
3140
3256
3372
3488
3605
3721
CFM
OV
(FPM)
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
1279
1395
1512
1628
1744
1860
1977
2093
2209
2326
2442
2558
2674
2791
2907
3023
3140
3256
P
OV
(FPM)
H
CFM
1600
2000
AIR FLOW - CFM
.25” SP
RPM
793
858
925
993
1062
1132
1207
1285
1363
1442
1522
1602
1682
1763
1844
1925
2007
2089
2171
2253
2335
2417
2500
2583
2665
2748
BHP
0.061
0.078
0.097
0.120
0.147
0.178
0.215
0.257
0.304
0.357
0.418
0.485
0.558
0.641
0.730
0.828
0.936
1.053
1.180
1.316
1.462
1.620
1.790
1.971
2.163
2.368
2.25” SP
RPM
1812
1861
1910
1961
2016
2073
2131
2189
2251
2314
2378
2443
2509
2575
2642
2709
2775
2842
BHP
0.696
0.763
0.834
0.911
0.995
1.086
1.185
1.289
1.403
1.525
1.655
1.794
1.943
2.101
2.269
2.446
2.629
2.824
13
16
P
Maximum RPM: 3020
1200
4
3/
800
HP
H
1/2
1000 RPM
700 RPM
400
ANGLE
SUPPORTS
UNIT SIZES
18 & UP
P
1300 RPM
0
P
H
1600 RPM
1.0
17
3
2000 RPM
1800 RPM
2.0
13
1 1/2 25 1/4
2200 RPM
3.0
0.0
31 1/2
2400 RPM
1
6.0
18 1/2
9 3/8
2400
BHP
0.103
0.124
0.148
0.177
0.209
0.246
0.287
0.333
0.385
0.443
0.507
0.578
0.658
0.743
0.839
0.942
1.054
1.176
1.308
1.448
1.599
1.763
1.937
2.122
2.320
2.531
2.50” SP
RPM
1930
1979
2029
2080
2136
2193
2251
2309
2371
2434
2498
2563
2628
2695
2762
2828
-
3200
3600
.50” SP
RPM
947
1004
1064
1128
1193
1260
1326
1394
1463
1533
1603
1677
1755
1832
1911
1990
2069
2149
2229
2309
2389
2470
2551
2632
2713
2795
2800
BHP
0.845
0.921
1.002
1.089
1.184
1.287
1.397
1.513
1.640
1.774
1.918
2.072
2.233
2.408
2.593
2.783
-
.75” SP
RPM
1078
1128
1183
1241
1301
1365
1430
1496
1563
1630
1697
1766
1835
1905
1976
2051
2128
2206
2284
2362
2441
2521
2600
2680
2760
2840
BHP
0.149
0.173
0.202
0.234
0.271
0.313
0.360
0.412
0.470
0.533
0.601
0.678
0.760
0.851
0.949
1.058
1.174
1.301
1.437
1.582
1.738
1.908
2.086
2.277
2.480
2.694
2.75” SP
RPM
1996
2044
2093
2143
2196
2253
2310
2368
2426
2488
2551
2615
2680
2746
2812
-
BHP
0.929
1.008
1.093
1.184
1.283
1.391
1.505
1.627
1.755
1.895
2.043
2.200
2.368
2.548
2.736
-
1” SP
RPM
1197
1241
1290
1344
1401
1460
1521
1585
1651
1717
1784
1850
1917
1985
2054
2123
2193
2264
2337
2414
2491
2569
2648
2726
2805
-
BHP
0.199
0.226
0.258
0.295
0.336
0.382
0.433
0.490
0.554
0.623
0.699
0.779
0.867
0.962
1.066
1.177
1.298
1.428
1.568
1.719
1.879
2.052
2.237
2.431
2.640
-
3” SP
RPM
2107
2156
2205
2256
2310
2367
2424
2482
2541
2603
2666
2730
2795
-
BHP
1.10
1.19
1.28
1.39
1.50
1.61
1.74
1.87
2.02
2.17
2.33
2.50
2.69
-
1.25” SP
RPM
1341
1390
1439
1493
1549
1607
1667
1731
1795
1861
1927
1994
2060
2127
2195
2263
2333
2402
2472
2543
2616
2693
2771
-
BHP
0.281
0.318
0.358
0.404
0.453
0.509
0.570
0.638
0.712
0.793
0.880
0.976
1.076
1.184
1.301
1.426
1.562
1.705
1.859
2.024
2.199
2.387
2.589
-
3.50” SP
RPM
2274
2323
2372
2422
2475
2531
2588
2646
2704
2763
2826
-
14 1/2
24 7/8
26 1/8
BHP
1.38
1.48
1.59
1.71
1.84
1.97
2.11
2.27
2.43
2.60
2.78
-
1.50” SP
RPM
1481
1529
1579
1632
1689
1747
1806
1868
1932
1997
2063
2130
2196
2263
2330
2398
2466
2535
2605
2675
2745
2816
-
BHP
0.380
0.424
0.473
0.527
0.587
0.653
0.725
0.802
0.887
0.980
1.080
1.189
1.303
1.426
1.556
1.697
1.845
2.004
2.175
2.355
2.545
2.748
-
4” SP
RPM
2393
2433
2481
2531
2580
2632
2688
2745
2802
-
BHP
1.59
1.69
1.81
1.94
2.07
2.21
2.36
2.52
2.69
-
1.75” SP
RPM
1613
1662
1712
1765
1822
1880
1938
2000
2064
2128
2194
2260
2327
2393
2460
2527
2595
2663
2732
2802
-
BHP
0.493
0.546
0.604
0.667
0.737
0.813
0.895
0.984
1.082
1.186
1.300
1.420
1.550
1.686
1.832
1.986
2.150
2.324
2.509
2.707
-
4.50” SP
RPM
2540
2585
2633
2683
2732
2784
2840
-
BHP
1.91
2.03
2.16
2.30
2.45
2.61
2.78
-
2” SP
RPM
1693
1739
1788
1838
1893
1950
2007
2066
2127
2191
2255
2320
2386
2453
2520
2586
2653
2720
2788
-
BHP
0.564
0.620
0.682
0.749
0.823
0.904
0.990
1.084
1.184
1.294
1.411
1.536
1.671
1.816
1.969
2.128
2.298
2.476
2.667
-
5” SP
RPM
2683
2731
2780
2829
-
BHP
2.25
2.40
2.55
2.70
-
15
US13 | BELT DRIVE
23 5/8
10 1/4
7.0
6.0
4.0
P
11
/2
HP
2H
P
1 1/2
14
26 1/2
18
1800 RPM
1600 RPM
1300 RPM
1.0
1/2
1000 RPM
700 RPM
0
400
800
1200
Maximum RPM: 2855
CFM
OV
(FPM)
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
857
952
1048
1143
1238
1333
1429
1524
1619
1714
1810
1905
2000
2095
2190
2286
2381
2476
2571
2667
2762
2857
2952
3048
3143
3238
CFM
OV
(FPM)
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
1143
1238
1333
1429
1524
1619
1714
1810
1905
2000
2095
2190
2286
2381
2476
2571
2667
2762
2857
1H
P
3/4
HP
HP
1600
2000 2400 2800
AIR FLOW - CFM
.25” SP
RPM
832
879
925
976
1034
1094
1155
1216
1278
1340
1403
1466
1531
1596
1662
1728
1794
1860
1926
1992
2059
2126
2193
2260
2327
2394
BHP
0.081
0.098
0.117
0.138
0.163
0.190
0.221
0.257
0.296
0.340
0.389
0.442
0.501
0.565
0.635
0.711
0.793
0.882
0.976
1.078
1.188
1.305
1.429
1.562
1.702
1.851
2.25” SP
RPM
1841
1880
1922
2962
2002
2042
2083
2126
2169
2212
2257
2305
2352
2400
2449
2496
2543
2590
2637
BHP
0.82
0.875
0.933
0.998
1.067
1.139
1.217
1.303
1.393
1.486
1.587
1.698
1.811
1.931
2.059
2.194
2.337
2.487
2.642
ANGLE
SUPPORTS
UNIT SIZES
18 & UP
14
17 1/4
3200
BHP
0.137
0.158
0.182
0.208
0.238
0.272
0.309
0.349
0.392
0.440
0.492
0.549
0.611
0.680
0.753
0.834
0.921
1.013
1.112
1.218
1.333
1.454
1.583
1.721
1.865
2.020
2.50” SP
RPM
1920
1952
1994
2036
2076
2116
2156
2197
2240
2282
2326
2371
2418
2465
2513
2562
2610
2656
2703
4000
4400
4800
.50” SP
RPM
1004
1047
1094
1142
1189
1237
1283
1329
1381
1439
1498
1559
1620
1681
1742
1804
1867
1929
1992
2055
2120
2185
2250
2316
2381
2447
3600
BHP
0.921
0.982
1.044
1.109
1.183
1.261
1.342
1.428
1.523
1.621
1.727
1.839
1.958
2.082
2.214
2.354
2.500
2.653
2.816
.75” SP
RPM
1146
1187
1229
1272
1317
1365
1413
1460
1507
1554
1600
1648
1702
1760
1819
1879
1940
2001
2062
2124
2185
2248
2310
2373
2436
2499
BHP
0.200
0.224
0.252
0.282
0.316
0.354
0.395
0.441
0.491
0.546
0.605
0.668
0.732
0.805
0.882
0.965
1.055
1.150
1.254
1.366
1.483
1.610
1.743
1.885
2.035
2.192
2.75” SP
RPM
2000
2026
2062
2105
2146
2186
2226
2266
2308
2350
2393
2436
2481
2528
2575
2623
2671
2720
2767
BHP
1.026
1.090
1.156
1.227
1.301
1.383
1.469
1.559
1.656
1.759
1.869
1.983
2.106
2.236
2.372
2.515
2.665
2.823
2.992
1” SP
RPM
1267
1308
1348
1389
1431
1475
1521
1568
1616
1664
1711
1758
1804
1850
1897
1951
2009
2067
2127
2187
2248
2309
2370
2432
2493
2555
BHP
0.268
0.296
0.327
0.361
0.399
0.441
0.487
0.536
0.590
0.650
0.714
0.783
0.857
0.935
1.019
1.104
1.200
1.299
1.406
1.519
1.640
1.768
1.905
2.053
2.205
2.368
3” SP
RPM
2100
2130
2170
2213
2253
2293
2333
2374
2415
2457
2500
2543
2588
2635
2682
2730
2778
-
BHP
1.201
1.272
1.346
1.425
1.508
1.599
1.693
1.794
1.899
2.012
2.131
2.256
2.389
2.531
2.678
2.834
2.996
-
1.25” SP
RPM
1374
1414
1455
1495
1536
1578
1620
1664
1711
1759
1807
1855
1901
1949
1995
2041
2087
2137
2191
2249
2307
2367
2427
2488
2549
2610
BHP
0.341
0.372
0.406
0.445
0.486
0.532
0.581
0.635
0.694
0.758
0.826
0.899
0.978
1.063
1.152
1.248
1.348
1.455
1.563
1.683
1.807
1.940
2.079
2.228
2.384
2.549
3.50” SP
RPM
2267
2297
2335
2378
2419
2459
2499
2539
2580
2622
2664
2707
2751
2795
-
BHP
1.509
1.593
1.678
1.769
1.862
1.967
2.076
2.188
2.307
2.434
2.567
2.708
2.857
3.010
-
14 1/2
25
26 1/4
1.50” SP
RPM
1480
1509
1551
1592
1632
1673
1714
1757
1800
1845
1892
1940
1988
2036
2083
2130
2177
2222
2269
2315
2369
2424
2482
2541
2601
2661
BHP
0.418
0.453
0.491
0.532
0.578
0.627
0.680
0.738
0.800
0.867
0.940
1.018
1.100
1.190
1.286
1.387
1.494
1.606
1.726
1.850
1.979
2.113
2.258
2.412
2.572
2.740
4” SP
RPM
2425
2454
2492
2534
2577
2616
2656
2696
2737
2778
2820
-
16
1 1/4
14 3/8
33 5/8
3H
2000 RPM
2.0
0.0
15 3/4
2200 RPM
3.0
10 1/2
RPM
BHP
RPM
1885
2800 RPM
2700 RPM
2600 RPM
2500 RPM
2400 RPM
5.0
18 1/2
BHP
1.848
1.942
2.040
2.141
2.249
2.365
2.487
2.614
2.748
2.886
3.035
-
1.75” SP
RPM
1606
1638
1680
1722
1761
1802
1843
1885
1928
1972
2019
2067
2115
2163
2210
2257
2304
2351
2397
2443
2489
2541
2595
2653
2711
BHP
0.538
0.580
0.624
0.673
0.726
0.783
0.844
0.910
0.981
1.057
1.139
1.228
1.321
1.419
1.525
1.638
1.756
1.882
2.014
2.152
2.295
2.445
2.597
2.764
2.937
4.50” SP
RPM
2574
2604
2642
2684
2727
2767
2806
2846
-
BHP
2.214
2.321
2.431
2.544
2.664
2.795
2.929
3.070
-
2” SP
RPM
1725
1761
1804
1844
1884
1925
1966
2008
2051
2094
2140
2188
2236
2284
2332
2379
2426
2473
2519
2655
2611
2658
2709
-
BHP
0.672
0.720
0.772
0.827
0.889
0.954
1.023
1.098
1.179
1.263
1.354
1.454
1.558
1.667
1.783
1.908
2.038
2.175
2.318
2.469
2.627
2.793
2.963
-
5” SP
RPM
2717
2747
2786
2828
-
BHP
2.611
2.727
2.851
2.976
-
US15 | BELT DRIVE
26 3/8
11 5/16
9.0
8.0
7.0
17 7/8
6.0
5H
P
4.0
P
1500 RPM
1
3/4 HP
HP
800 RPM
0
500
1000
1500
Maximum RPM: 2600
CFM
OV
(FPM)
1150
1375
1600
1825
2050
2275
2500
2725
2950
3175
3400
3625
3850
4075
4300
4525
4750
4975
5200
5425
885
1058
1231
1404
1577
1750
1923
2096
2269
2442
2615
2788
2962
3135
3308
3481
3654
3827
4000
4173
CFM
OV
(FPM)
1600
1750
1900
2050
2200
2350
2500
2650
2800
2950
3100
3250
3400
3550
3700
3850
4050
4250
4450
4650
1231
1346
1462
1577
1692
1808
1923
2038
2154
2269
2385
2500
2615
2731
2846
2962
3115
3269
3423
3577
2000
/2 H
2500
.25” SP
BHP
0.090
0.130
0.170
0.230
0.300
0.380
0.470
0.590
0.720
0.870
1.040
1.240
1.460
1.710
1.990
2.300
2.630
3.000
3.410
3.850
2.25” SP
RPM
1507
1536
1567
1601
1637
1674
1714
1756
1799
1844
1890
1937
1986
2035
2086
2137
2205
2275
2346
2417
BHP
0.960
1.040
1.120
1.210
1.310
1.420
1.540
1.660
1.800
1.950
2.100
2.270
2.450
2.640
2.840
3.060
3.360
3.680
4.030
4.400
15 3/4
29 5/8
P
P
ANGLE
SUPPORTS
UNIT SIZES
18 & UP
15
19 1/4
3000 3500 4000
AIR FLOW - CFM
RPM
667
744
823
905
988
1073
1159
1247
1337
1428
1520
1613
1707
1801
1895
1990
2085
2180
2275
2371
1 1/2
20
2H
11
1200 RPM
1.0
0.0
3H
1800 RPM
2.0
1 1/4
15 3/4
37 7/8
2100 RPM
3.0
11 5/8
RPM
BHP
M
2500 RP
5.0
20 1/2
4500
BHP
0.160
0.200
0.260
0.320
0.400
0.500
0.610
0.730
0.870
1.030
1.220
1.420
1.650
1.910
2.200
2.510
2.860
3.240
3.650
4.100
2.50” SP
RPM
1574
1600
1630
1662
1696
1733
1771
1811
1852
1896
1940
1987
2034
2082
2131
2182
2249
2318
2388
2458
5500
6000
6500
.50” SP
RPM
800
864
935
1011
1089
1169
1250
1332
1416
1501
1587
1674
1763
1852
1943
2034
2126
2219
2312
2405
5000
BHP
1.080
1.160
1.250
1.350
1.450
1.560
1.680
1.810
1.950
2.110
2.270
2.440
2.630
2.830
3.040
3.260
3.570
3.900
4.260
4.640
.75” SP
RPM
916
971
1034
1102
1175
1251
1330
1410
1490
1572
1655
1739
1823
1909
1996
2084
2173
2262
2353
2444
BHP
0.230
0.280
0.340
0.420
0.510
0.610
0.740
0.870
1.030
1.200
1.400
1.610
1.850
2.120
2.420
2.740
3.090
3.480
3.900
4.360
2.75” SP
RPM
1638
1663
1691
1721
1754
1789
1826
1865
1905
1947
1990
2035
2081
2128
2176
2225
2292
2360
2429
2498
BHP
1.200
1.290
1.380
1.480
1.590
1.710
1.830
1.970
2.110
2.270
2.440
2.620
2.810
3.010
3.230
3.450
3.780
4.120
4.490
4.880
1” SP
RPM
1020
1069
1125
1187
1255
1327
1402
1479
1558
1638
1719
1800
1883
1966
2050
2136
2222
2309
2396
2485
BHP
0.300
0.360
0.430
0.520
0.620
0.730
0.860
1.010
1.180
1.370
1.580
1.810
2.060
2.340
2.640
2.980
3.340
3.740
4.170
4.630
3” SP
RPM
1701
1723
1750
1779
1811
1844
1880
1917
1956
1997
2039
2082
2127
2173
2220
2268
2334
2401
2469
2537
BHP
1.320
1.420
1.520
1.620
1.730
1.850
1.980
2.120
2.270
2.430
2.610
2.790
2.990
3.200
3.420
3.650
3.980
4.340
4.720
5.120
1.25” SP
RPM
1116
1159
1210
1267
1330
1398
1469
1543
1620
1698
1778
1858
1939
2021
2104
2187
2271
2356
2441
2528
BHP
0.390
0.450
0.530
0.620
0.730
0.850
0.990
1.150
1.330
1.530
1.750
2.000
2.260
2.550
2.870
3.220
3.590
4.000
4.440
4.920
3.50” SP
RPM
1820
1840
1863
1890
1919
1950
1983
2018
2055
2093
2133
2174
2217
2261
2306
2352
2415
2480
2546
-
BHP
1.580
1.680
1.790
1.910
2.030
2.160
2.300
2.450
2.610
2.780
2.960
3.150
3.360
3.580
3.810
4.060
4.400
4.780
5.170
-
16
29 1/8
30 3/8
1.50” SP
RPM
1205
1243
1290
1343
1402
1465
1533
1605
1679
1755
1833
1912
1992
2073
2154
2236
2319
2402
2486
2571
BHP
0.470
0.550
0.630
0.730
0.840
0.970
1.120
1.290
1.480
1.700
1.930
2.180
2.460
2.770
3.100
3.460
3.840
4.260
4.720
5.200
4” SP
RPM
1932
1951
1971
1995
2022
2051
2082
2115
2150
2186
2224
2263
2304
2345
2389
2433
2494
2556
-
BHP
1.850
1.960
2.080
2.200
2.340
2.480
2.630
2.790
2.950
3.130
3.320
3.520
3.740
3.970
4.210
4.470
4.830
5.220
-
1.75” SP
RPM
1289
1323
1366
1416
1471
1531
1595
1664
1736
1810
1886
1964
2042
2122
2202
2283
2365
2447
2530
-
BHP
0.560
0.650
0.740
0.840
0.960
1.100
1.260
1.440
1.640
1.860
2.100
2.370
2.660
2.980
3.320
3.690
4.100
4.530
4.990
-
4.50” SP
RPM
2056
2075
2096
2120
2147
2177
2208
2241
2276
2312
2349
2388
2428
2469
2512
2571
-
BHP
2.250
2.370
2.510
2.660
2.810
2.970
3.140
3.310
3.500
3.700
3.910
4.130
4.370
4.620
4.890
5.260
-
2” SP
RPM
1369
1399
1438
1485
1537
1594
1656
1721
1790
1862
1937
2013
2090
2169
2248
2329
2410
2491
2573
-
BHP
0.660
0.750
0.850
0.960
1.080
1.230
1.390
1.580
1.790
2.020
2.280
2.560
2.860
3.190
3.550
3.930
4.350
4.790
5.270
-
5” SP
RPM
2156
2174
2193
2215
2240
2268
2297
2329
2362
2396
2432
2470
2508
2548
2589
-
BHP
2.560
2.680
2.830
2.980
3.150
3.320
3.490
3.680
3.880
4.080
4.300
4.530
4.780
5.040
5.310
-
17
US16 | BELT DRIVE
29 1/8
12 1/4
7.0
P
H
1000
2000
Maximum RPM: 2400
CFM
OV
(FPM)
1250
1400
1550
1700
1850
2000
2150
2300
2450
2600
2750
2900
3050
3200
3350
3500
3650
3800
3950
4100
4250
4400
4550
4700
4850
5000
5150
5300
5450
5600
833
933
1033
1133
1233
1333
1433
1533
1633
1733
1833
1933
2033
2133
2233
2333
2433
2533
2633
2733
2833
2933
3033
3133
3233
3333
3433
3533
3633
3733
CFM
OV
(FPM)
2600
2750
2900
3050
3200
3350
3500
3650
3800
3950
4100
4250
4400
4550
4700
4850
5000
5150
1733
1833
1933
2033
2133
2233
2333
2433
2533
2633
2733
2833
2933
3033
3133
3233
3333
3433
3000
/2
HP
P
0
22
H
0.0
1
3/4 HP
HP
.25” SP
BHP
0.098
0.115
0.138
0.165
0.196
0.229
0.266
0.308
0.355
0.406
0.464
0.529
0.599
0.677
0.763
0.857
0.957
1.066
1.185
1.309
1.442
1.586
1.736
1.899
2.069
2.252
2.442
2.646
2.862
3.089
2.25” SP
RPM
1611
1646
1679
1708
1739
1774
1813
1852
1889
1927
1965
2003
2042
2085
2128
2172
2216
2260
BHP
1.587
1.705
1.824
1.940
2.065
2.207
2.366
2.531
2.681
2.841
3.008
3.181
3.365
3.583
3.809
4.050
4.301
4.562
ANGLE
SUPPORTS
UNIT SIZES
18 & UP
16
20 3/4
4000
5000
AIR FLOW - CFM
RPM
626
663
705
748
793
838
884
931
979
1027
1076
1127
1177
1228
1280
1332
1384
1436
1489
1541
1593
1646
1698
1751
1803
1856
1908
1961
2014
2067
BHP
0.171
0.197
0.225
0.26
0.294
0.332
0.377
0.429
0.487
0.546
0.611
0.682
0.758
0.840
0.930
1.027
1.130
1.240
1.365
1.495
1.636
1.783
1.946
2.114
2.296
2.488
2.691
2.909
3.134
3.370
2.50” SP
RPM
1664
1701
1735
1768
1798
1828
1863
1900
1940
1977
2015
2053
2091
2129
2170
2213
2257
2300
7000
8000
.50” SP
RPM
766
798
830
868
905
943
984
1028
1072
1116
1161
1207
1253
1300
1348
1396
1444
1492
1543
1593
1644
1694
1746
1797
1849
1901
1953
2006
2058
2110
6000
BHP
1.740
1.869
1.997
2.129
2.260
2.396
2.553
2.721
2.907
3.075
3.251
3.433
3.621
6.817
4.039
4.284
4.544
4.809
.75” SP
RPM
906
942
974
1005
1041
1080
1117
1155
1196
1239
1283
1327
1372
1417
1462
1508
1555
1602
1650
1697
1745
1794
1843
1893
1944
1994
2045
2096
2148
BHP
0.280
0.318
0.357
0.399
0.447
0.501
0.553
0.610
0.676
0.752
0.835
0.922
1.014
1.111
1.215
1.326
1.445
1.570
1.706
1.847
1.998
2.162
2.334
2.519
2.718
2.923
3.143
3.374
3.621
2.75” SP
RPM
1717
1751
1788
1822
1855
1884
1914
1949
1986
2025
2063
2101
2138
2176
2215
2253
2296
2339
BHP
1.897
2.029
2.172
2.313
2.459
2.600
2.749
2.920
3.105
3.303
3.496
3.687
3.879
4.084
4.301
4.520
4.784
5.058
1” SP
RPM
1032
1066
1101
1132
1163
1200
1239
1276
1314
1352
1395
1438
1482
1526
1571
1616
1661
1707
1753
1800
1847
1894
1942
1990
2038
2086
2136
2186
BHP
0.411
0.459
0.511
0.563
0.618
0.685
0.758
0.825
0.899
0.977
1.073
1.175
1.287
1.403
1.524
1.651
1.785
1.930
2.080
2.240
2.407
2.583
2.772
2.970
3.178
3.395
3.632
3.879
3” SP
RPM
1774
1800
1835
1872
1906
1939
1968
1998
2033
2069
2108
2148
2184
2222
2260
2298
2337
-
BHP
2.065
2.192
2.337
2.494
2.650
2.809
2.963
3.126
3.313
3.509
3.724
3.942
4.143
4.356
4.577
4.805
5.048
-
1.25” SP
RPM
1147
1179
1216
1249
1278
1311
1349
1388
1425
1463
1501
1542
1585
1629
1673
1717
1762
1807
1852
1898
1944
1990
2037
2085
2132
2180
2228
BHP
0.561
0.619
0.685
0.750
0.814
0.888
0.974
1.065
1.150
1.241
1.338
1.449
1.574
1.710
1.851
1.997
2.149
2.308
2.476
2.655
2.842
3.033
3.238
3.457
3.680
3.919
4.167
3.50” SP
RPM
1909
1931
1963
1999
2035
2068
2101
2130
2160
2194
2231
2270
2309
2346
-
16
28 3/4
30 1/4
BHP
2.550
2.690
2.854
3.028
3.210
3.391
3.580
3.761
3.951
4.163
4.398
4.648
4.905
5.137
-
1.50” SP
RPM
1255
1286
1322
1356
1387
1417
1452
1491
1529
1567
1605
1643
1684
1727
1770
1814
1859
1903
1948
1993
2038
2084
2130
2176
2223
2270
BHP
0.733
0.802
0.878
0.957
1.035
1.116
1.211
1.318
1.423
1.528
1.639
1.755
1.888
2.036
2.192
2.359
2.539
2.713
2.899
3.094
3.297
3.514
3.738
3.967
4.211
4.466
4” SP
RPM
2054
2083
2120
2156
2191
2224
2255
2284
2315
2350
-
18
17 1/4
32 3/8
2
11
1250 RPM
1000 RPM
750 RPM
500 RPM
1.0
1 1/2
P
H
2.0
41 5/8
5
3.0
1 1/4
17 1/2
19 5/8
2150 RPM
2050 RPM
1950 RPM
1850 RPM
1750 RPM
1650 RPM
1500 RPM
3
2350 RPM
2250 RPM
4.0
12 3/4
RPM
BHP
6.0
5.0
20 1/2
BHP
3.224
3.403
3.604
3.808
4.018
4.228
4.437
4.646
4.869
5.119
-
1.75” SP
RPM
1356
1386
1423
1457
1489
1518
1552
1589
1628
1666
1703
1741
1780
1821
1864
1907
1951
1995
2040
2084
2129
2174
2220
2266
2312
BHP
0.925
1.004
1.094
1.184
1.276
1.368
1.474
1.591
1.719
1.839
1.961
2.091
2.231
2.387
2.560
2.741
2.935
3.138
3.347
3.555
3.777
4.009
4.256
4.513
4.775
4.50” SP
RPM
2174
2201
2235
2272
2308
2341
2374
-
BHP
3.808
4.003
4.217
4.449
4.684
4.916
5.156
-
2” SP
RPM
1451
1482
1519
1553
1586
1615
1647
1683
1722
1761
1798
1836
1874
1912
1954
1997
2041
2085
2129
2173
2218
2263
2308
2353
BHP
1.136
1.228
1.330
1.432
1.539
1.642
1.757
1.887
2.030
2.174
2.310
2.455
2.606
2.764
2.949
3.148
3.361
3.583
3.814
4.047
4.289
4.541
4.802
5.074
5” SP
RPM
2289
2314
2347
2383
-
BHP
4.431
4.641
4.878
5.127
-
US18 | BELT DRIVE
32 3/8
13 7/8
7.0
14 1/8
1 1/2
RPM
BHP
6.0
21 5/8
5.0
4.0
2100 RPM
2000 RPM
1900 RPM
1800 RPM
1700 RPM
1600 RPM
3.0
2.0
/2
1000
OV
(FPM)
1400
1625
1850
2075
2300
2525
2750
2975
3200
3425
3650
3875
4100
4325
4550
4775
5000
5225
5450
5675
5900
6125
6350
6575
6800
737
855
974
1092
1211
1329
1447
1566
1684
1803
1921
2039
2158
2276
2395
2513
2632
2750
2868
2987
3105
3224
3342
3461
3579
CFM
OV
(FPM)
1850
2075
2300
2525
2750
2975
3200
3425
3650
3875
4100
4325
4550
4775
5000
5225
5450
5675
5900
6125
6350
6575
6800
974
1092
1211
1329
1447
1566
1684
1803
1921
2039
2158
2276
2395
2513
2632
2750
2868
2987
3105
3224
3342
3461
3579
19
35 1/4
24
P
2 HP
1 HP
2000
3000
Maximum RPM: 2150
CFM
1 1/2
HP
5H
1400 RPM
0
19 3/8
45 5/8
71
1200 RPM
1000 RPM
800 RPM
450 RPM
1.0
0.0
23 1/2
3H
P
/2 H
P
4000
5000
6000
AIR FLOW - CFM
.25” SP
RPM
488
521
563
607
650
695
740
786
833
882
930
980
1029
1079
1129
1179
1230
1281
1331
1382
1433
1485
1536
1587
1639
BHP
0.095
0.116
0.145
0.180
0.220
0.268
0.323
0.385
0.456
0.538
0.627
0.730
0.841
0.965
1.102
1.251
1.417
1.596
1.787
1.996
2.222
2.468
2.728
3.004
3.306
2.25” SP
RPM
1252
1261
1273
1285
1300
1321
1347
1373
1399
1425
1452
1479
1510
1546
1586
1628
1670
1713
1756
1800
1844
1887
1931
BHP
1.168
1.267
1.367
1.469
1.582
1.714
1.867
2.027
2.179
2.331
2.494
2.659
2.837
3.045
3.278
3.531
3.796
4.082
4.382
4.704
5.046
5.399
5.776
7000
BHP
0.179
0.214
0.248
0.284
0.330
0.386
0.450
0.523
0.603
0.692
0.793
0.906
1.026
1.162
1.310
1.468
1.643
1.831
2.034
2.251
2.488
2.741
3.012
3.299
3.605
2.50” SP
RPM
1316
1325
1335
1347
1359
1377
1400
1425
1451
1478
1504
1531
1558
1589
1625
1663
1705
1748
1790
1833
1877
1921
1964
8000
9000
10000
.50” SP
RPM
622
648
675
701
737
779
822
866
909
953
998
1044
1089
1136
1184
1232
1281
1330
1379
1428
1478
1528
1578
1628
1678
ANGLE
SUPPORTS
UNIT SIZES
18 & UP
18
22 1/2
11
BHP
1.321
1.430
1.538
1.650
1.765
1.901
2.056
2.223
2.402
2.573
2.743
2.924
3.108
3.306
3.536
3.782
4.060
4.358
4.663
4.991
5.342
5.710
6.092
.75” SP
RPM
739
754
778
804
830
857
892
932
975
1018
1061
1105
1149
1193
1239
1284
1330
1376
1423
1471
1520
1569
1618
1667
1716
BHP
0.274
0.312
0.360
0.412
0.463
0.518
0.585
0.663
0.754
0.853
0.961
1.083
1.215
1.356
1.516
1.685
1.869
2.067
2.279
2.507
2.755
3.019
3.299
3.597
3.912
2.75” SP
RPM
1377
1385
1394
1406
1418
1431
1451
1476
1502
1528
1554
1581
1608
1634
1665
1701
1739
1781
1823
1866
1909
1952
1996
BHP
1.478
1.594
1.714
1.835
1.960
2.092
2.248
2.427
2.618
2.816
2.996
3.190
3.390
3.585
3.803
4.056
4.327
4.630
4.948
5.288
5.643
6.015
6.412
1” SP
RPM
841
853
868
891
917
943
970
998
1034
1074
1117
1160
1203
1247
1290
1335
1379
1424
1470
1515
1562
1608
1656
1704
1752
BHP
0.378
0.423
0.473
0.535
0.606
0.672
0.745
0.819
0.911
1.015
1.135
1.265
1.404
1.559
1.722
1.904
2.095
2.303
2.529
2.764
3.025
3.296
3.589
3.895
4.219
3” SP
RPM
1435
1443
1452
1463
1475
1487
1503
1524
1550
1576
1602
1628
1655
1682
1709
1740
1775
1813
1855
1897
1940
1983
2026
BHP
1.637
1.763
1.894
2.027
2.161
2.299
2.453
2.629
2.832
3.043
3.254
3.452
3.664
3.884
4.103
4.340
4.609
4.905
5.234
5.578
5.946
6.330
6.731
1.25” SP
RPM
934
944
956
971
994
1020
1046
1073
1100
1131
1168
1210
1252
1295
1339
1382
1426
1470
1514
1559
1604
1650
1695
1742
1788
BHP
0.489
0.544
0.600
0.663
0.740
0.828
0.913
1.001
1.093
1.192
1.312
1.450
1.598
1.760
1.937
2.123
2.328
2.545
2.775
3.025
3.290
3.576
3.871
4.197
4.533
3.50” SP
RPM
1546
1553
1561
1570
1581
1593
1605
1620
1641
1666
1692
1718
1744
1771
1798
1825
1851
1884
1920
1958
1999
2041
2084
BHP
1.973
2.114
2.261
2.415
2.567
2.724
2.885
3.060
3.267
3.494
3.737
3.990
4.221
4.464
4.715
4.974
5.217
5.510
5.833
6.179
6.552
6.951
7.377
17 7/8
32
33 1/2
1.50” SP
RPM
1018
1027
1038
1050
1066
1089
1115
1141
1168
1195
1223
1259
1298
1340
1383
1426
1470
1513
1557
1601
1645
1690
1735
1780
1825
BHP
0.604
0.670
0.736
0.804
0.881
0.974
1.079
1.182
1.287
1.397
1.507
1.645
1.796
1.966
2.152
2.349
2.562
2.786
3.031
3.289
3.562
3.856
4.166
4.493
4.836
4” SP
RPM
1650
1655
1663
1672
1680
1692
1704
1716
1731
1752
1776
1802
1828
1854
1881
1907
1934
1961
1988
2023
2059
2098
-
BHP
2.325
2.477
2.643
2.817
2.989
3.164
3.344
3.527
3.729
3.964
4.217
4.492
4.778
5.053
5.326
5.599
5.891
6.190
6.470
6.823
7.193
7.598
-
1.75” SP
RPM
1095
1104
1113
1125
1137
1155
1179
1205
1231
1258
1285
1312
1346
1383
1425
1467
1510
1553
1597
1640
1684
1728
1772
1817
1862
BHP
0.724
0.799
0.876
0.953
1.034
1.129
1.240
1.363
1.483
1.604
1.732
1.859
2.010
2.178
2.371
2.575
2.796
3.030
3.283
3.548
3.834
4.136
4.453
4.793
5.151
4.50” SP
RPM
1752
1759
1767
1776
1785
1797
1809
1821
1837
1857
1881
1907
1933
1959
1986
2012
2039
2066
2093
-
BHP
2.857
3.038
3.226
3.423
3.617
3.815
4.018
4.225
4.458
4.715
5.000
5.308
5.627
5.945
6.250
6.554
6.877
7.211
7.537
-
2” SP
RPM
1169
1176
1185
1195
1207
1219
1239
1265
1291
1317
1343
1370
1397
1429
1466
1507
1549
1591
1634
1678
1721
1765
1808
1852
1897
BHP
0.853
0.934
1.022
1.108
1.198
1.290
1.404
1.538
1.680
1.816
1.951
2.096
2.242
2.405
2.596
2.809
3.037
3.277
3.537
3.817
4.105
4.420
4.743
5.090
5.462
5” SP
RPM
1845
1850
1858
1866
1875
1885
1897
1909
1921
1937
1958
1982
2008
2034
2060
2086
2113
-
BHP
3.255
3.445
3.652
3.863
4.083
4.299
4.520
4.746
4.977
5.235
5.529
5.845
6.187
6.540
6.901
7.227
7.573
-
19
US20 | BELT DRIVE
34 1/2
14 13/16
7.0
2150 RPM
H
P
7
1750 RPM
P
H
P
H
1450 RPM
1350 RPM
1250 RPM
0.0
11
25 1/2
2H
/2
750 RPM
P
HP
2000
4000
Maximum RPM: 2175
CFM
OV
(FPM)
2500
2750
3000
3250
3500
3750
4000
4250
4500
4750
5000
5250
5500
5750
6000
6250
6500
6750
7000
7250
7500
7750
8000
8250
8500
8750
9000
9250
9500
9750
1136
1250
1364
1477
1591
1705
1818
1932
2045
2159
2273
2386
2500
2614
2727
2841
2955
3068
3182
3295
3409
3523
3636
3750
3864
3977
4091
4205
4318
4432
CFM
OV
(FPM)
4500
4750
5000
5250
5500
5750
6000
6250
6500
6750
7000
7250
7500
7750
8000
8250
8500
8750
9000
9250
2045
2159
2273
2386
2500
2614
2727
2841
2955
3068
3182
3295
3409
3523
3636
3750
3864
3977
4091
4205
6000
AIR FLOW - CFM
Max BHP: (RPM/992)3
.25” SP
RPM
590
628
667
707
747
788
829
872
917
962
1007
1053
1098
1144
1190
1236
1283
1329
1376
1422
1469
1515
1562
1609
1656
1703
1750
1797
1844
1891
BHP
0.204
0.244
0.290
0.342
0.401
0.468
0.543
0.628
0.724
0.830
0.946
1.075
1.213
1.366
1.531
1.709
1.906
2.112
2.338
2.576
2.836
3.106
3.400
3.712
4.043
4.393
4.762
5.152
5.563
5.995
2.25” SP
RPM
1370
1399
1429
1460
1490
1523
1557
1591
1625
1660
1697
1734
1771
1809
1846
1885
1923
1962
2001
2041
BHP
2.616
2.790
2.979
3.182
3.387
3.606
3.831
4.067
4.312
4.576
4.875
5.187
5.512
5.861
6.214
6.600
6.983
7.392
7.817
8.271
ANGLE
SUPPORTS
UNIT SIZES
18 & UP
20
24 1/4
500 RPM
0
8000
BHP
0.337
0.385
0.437
0.498
0.568
0.644
0.730
0.823
0.924
1.035
1.157
1.292
1.437
1.596
1.768
1.957
2.159
2.375
2.606
2.857
3.118
3.401
3.701
4.018
4.354
4.708
5.081
5.482
5.895
6.338
2.50” SP
RPM
1416
1445
1474
1504
1534
1565
1597
1631
1665
1699
1734
1770
1806
1844
1881
1919
1956
1995
2033
2072
12000
.50” SP
RPM
691
723
757
793
830
867
906
945
9840
1024
1064
1105
1146
1188
1231
1276
1321
1366
1411
1457
1502
1548
1594
1640
1686
1732
1778
1825
1871
1918
10000
BHP
2.851
3.070
3.264
3.472
3.690
3.924
4.163
4.411
4.669
4.637
5.225
5.539
5.869
6.232
6.599
6.992
7.388
7.818
8.247
8.703
.75” SP
RPM
780
809
839
870
904
938
974
1011
1048
1086
1125
1164
1203
1243
1283
1324
1365
1406
1448
1490
1535
1580
1625
1670
1715
1761
1806
1852
1898
1943
BHP
0.478
0.540
0.604
0.674
0.749
0.829
0.922
1.027
1.139
1.262
1.395
1.537
1.688
1.854
2.031
2.226
2.433
2.651
2.891
3.142
3.417
3.709
4.017
4.342
4.684
5.053
5.432
5.840
6.268
6.706
2.75” SP
RPM
1466
1489
1517
1547
1577
1607
1638
1669
1703
1737
1771
1805
1841
1878
1914
1952
1989
2027
2065
2103
BHP
3.109
3.321
3.552
3.773
4.003
4.242
4.498
4.756
5.027
5.308
5.600
5.902
6.239
6.606
6.977
7.384
7.795
8.233
8.688
9.149
Wheel Diameter: 20”
1” SP
RPM
874
887
913
943
973
1004
1038
1072
1107
1143
1181
1218
1256
1295
1334
1374
1413
1453
1494
1534
1575
1616
1658
1699
1743
1788
1833
1878
1923
1969
BHP
0.648
0.692
0.774
0.855
0.942
1.036
1.135
1.241
1.357
1.488
1.635
1.787
1.952
2.129
2.316
2.520
2.729
2.957
3.205
3.461
3.738
4.029
4.343
4.665
5.017
5.392
5.786
6.199
6.631
7.095
3” SP
RPM
1520
1535
1560
1588
1618
1648
1678
1708
1740
1773
1807
1841
1876
1910
1947
1984
2021
2058
2096
2134
BHP
3.438
3.585
3.827
4.075
4.317
4.568
4.829
5.099
5.392
5.677
5.981
6.297
6.634
6.973
7.368
7.778
8.203
8.644
9.113
9.599
1.25” SP
RPM
975
986
1009
1038
1068
1099
1130
1164
1198
1233
1269
1307
1344
1382
1420
1459
1498
1538
1577
1617
1658
1698
1739
1780
1821
1863
1904
1949
1993
BHP
0.895
0.944
1.037
1.139
1.244
1.358
1.474
1.600
1.732
1.876
2.038
2.218
2.404
2.606
2.816
3.041
3.278
3.533
3.795
4.077
4.384
4.699
5.037
5.391
5.762
6.159
6.565
7.015
7.472
3.50” SP
RPM
1637
1649
1668
1696
1725
1754
1784
1815
1845
1876
1910
1944
1978
2012
2047
2082
2119
2156
-
20
34 3/4
36 1/4
BHP
4.273
4.412
4.642
4.942
5.226
5.502
5.796
6.111
6.427
6.760
7.102
7.455
7.820
8.198
8.599
9.021
9.489
9.974
-
1.50” SP
RPM
1067
1079
1099
1127
1157
1187
1218
1251
1285
1319
1354
1390
1428
1465
1503
1541
1580
1619
1658
1697
1737
1777
1817
1858
1899
1940
1981
2023
BHP
1.172
1.234
1.334
1.457
1.580
1.709
1.850
1.995
2.148
2.309
2.483
2.678
2.894
3.116
3.355
3.605
3.869
4.147
4.437
4.741
5.068
5.409
5.769
6.156
6.561
6.982
7.422
7.892
4” SP
RPM
1747
1758
1774
1798
1826
1856
1886
1916
1946
1977
2008
2042
2075
2109
2144
-
20
20 1/2
37 5/8
P
H
1000 RPM
1.0
1 1/2
5
1550 RPM
2.0
48 1/2
2
1/
1650 RPM
3.0
21 3/4
23
10
1850 RPM
4.0
1 1/2
RPM
BHP
2050 RPM
1950 RPM
5.0
14 3/4
3
6.0
28 1/2
BHP
5.172
5.329
5.539
5.853
6.194
6.513
6.842
7.183
7.534
7.909
8.287
8.679
9.069
9.485
9.927
-
1.75” SP
RPM
1153
1165
1183
1212
1241
1271
1302
1333
1367
1401
1436
1471
1508
1545
1582
1620
1658
1697
1736
1775
1814
1854
1894
1934
1974
2015
2056
BHP
1.480
1.553
1.661
1.812
1.949
2.097
2.258
2.422
2.596
2.778
2.974
3.182
3.418
3.665
3.923
4.202
4.493
4.799
5.118
5.452
5.800
6.173
6.561
6.967
7.394
7.850
8.325
4.50” SP
RPM
1851
1862
1875
1896
1924
1953
1983
2013
2043
2073
2104
2136
2169
-
BHP
6.135
6.318
6.503
6.833
7.219
7.583
7.948
8.324
8.711
9.111
9.535
9.968
10.396
-
2” SP
RPM
1234
1245
1264
1292
1322
1352
1382
1413
1446
1480
1514
1549
1585
1622
1659
1697
1734
1772
1811
1850
1889
1928
1968
2008
2048
2088
BHP
1.818
1.896
2.025
2.194
2.355
2.523
2.699
2.890
3.080
3.284
3.496
3.725
3.977
4.249
4.535
4.841
5.152
5.485
5.834
6.197
6.575
6.969
7.390
7.828
8.283
8.759
5” SP
RPM
1950
1960
1973
1991
2018
2047
2076
2106
2136
2167
-
BHP
7.161
7.358
7.562
7.882
8.300
8.728
9.115
9.526
9.950
10.400
-
US22 | BELT DRIVE
37 5/8
9.0
7.0
6.0
17
28 1/2
16
1 1/2
RPM
BHP
1850 RPM
1800 RPM
25 5/16
23 9/16
1700 RPM
16
1600 RPM
P
10
1500 RPM
P
2
1/
24
43
28 3/4
H
P
1250 RPM
5
H
3.0
1 1/2
H
1400 RPM
4.0
54
H
5.0
7
P
8.0
1000 RPM
2.0
1.0
0.0
3H
P
2H
400 RPM
0
2000
4000
Maximum RPM: 1865
CFM
OV
(FPM)
2900
3200
3500
3800
4100
4400
4700
5000
5300
5600
5900
6200
6500
6800
7100
7400
7700
8000
8300
8600
8900
9200
9500
9800
10100
10400
10700
11000
11300
11600
11900
1036
1143
1250
1357
1464
1571
1679
1786
1893
2000
2107
2214
2321
2429
2536
2643
2750
2857
2964
3071
3179
3286
3393
3500
3607
3714
3821
3929
4036
4143
4250
CFM
OV
(FPM)
5000
5300
5600
5900
6200
6500
6800
7100
7400
7700
8000
8300
8600
8900
9200
9500
9800
10100
10400
1786
1893
2000
2107
2214
2321
2429
2536
2643
2750
2857
2964
3071
1379
3286
3393
3500
3607
3714
6000
8000
10000
AIR FLOW - CFM
Max BHP: (RPM/806)3
.25” SP
RPM
496
529
563
598
633
670
706
743
780
818
856
894
932
971
1010
1049
1088
1128
1167
1206
1246
1286
1325
1365
1405
1445
1484
1524
1564
1604
1644
BHP
0.226
0.271
0.323
0.383
0.449
0.527
0.610
0.704
0.808
0.926
1.055
1.195
1.347
1.516
1.699
1.897
2.110
2.344
2.589
2.850
3.137
3.442
3.757
4.101
4.465
4.851
5.247
5.676
6.128
6.603
7.103
2.25” SP
RPM
1145
1160
1181
1206
1234
1262
1291
1322
1352
1383
1414
1446
1478
1510
1543
1577
1611
1645
1679
BHP
2.784
2.923
3.104
3.321
3.568
3.827
4.103
4.384
4.667
4.973
5.292
5.637
5.996
6.368
6.763
7.188
7.631
8.092
8.572
ANGLE
SUPPORTS
UNIT SIZES
18 & UP
24
28
P
700 RPM
BHP
0.370
0.429
0.493
0.563
0.639
0.730
0.825
0.935
1.052
1.182
1.323
1.474
1.642
1.822
2.015
2.222
2.443
2.685
2.943
3.218
3.509
3.817
4.153
4.507
4.882
5.277
5.693
6.131
6.603
7.087
7.607
2.50” SP
RPM
1195
1208
1223
1245
1269
1297
1326
1355
1385
1415
1446
1477
1508
1540
1572
1605
1638
1672
1706
14000
16000
.50” SP
RPM
580
608
639
670
701
735
768
803
837
872
908
944
981
1018
1055
1092
1129
1167
1205
1243
1281
1319
1358
1397
1436
1475
1514
1553
1593
1632
1672
12000
BHP
3.134
3.273
3.427
3.636
3.868
4.142
4.438
4.747
5.048
5.358
5.693
6.042
6.405
6.796
7.203
7.633
8.079
8.557
9.054
.75” SP
RPM
661
679
705
733
763
794
825
857
890
923
957
992
1026
1061
1097
1133
1169
1206
1243
1280
1317
1354
1392
1429
1467
1505
1543
1581
1620
1659
1698
BHP
0.536
0.429
0.664
0.751
0.843
0.942
1.049
1.168
1.298
1.437
1.591
1.761
1.937
2.131
2.339
2.559
2.792
3.048
3.318
3.605
3.908
4.227
4.575
4.930
5.315
5.720
6.145
6.591
7.071
7.573
8.100
2.75” SP
RPM
1243
1256
1268
1285
1307
1331
1359
1387
1416
1446
1477
1507
1538
1570
1601
1633
1665
1698
1732
BHP
3.497
3.646
3.790
3.977
4.207
4.463
4.764
5.077
5.416
5.750
6.101
6.453
6.831
7.239
7.648
8.088
8.542
9.022
9.535
1” SP
RPM
745
757
771
793
819
848
878
908
939
971
1003
1036
1070
1104
1138
1173
1208
1243
1279
1315
1351
1388
1425
1462
1499
1536
1573
1611
1649
1686
1724
BHP
0.746
0.798
0.857
0.941
1.043
1.162
1.285
1.412
1.551
1.705
1.868
2.044
2.237
2.443
2.661
2.899
3.152
3.418
3.700
3.997
4.310
4.649
5.006
5.381
5.776
6.189
6.622
7.089
7.577
8.073
8.606
3” SP
RPM
1290
1302
1314
1327
1345
1367
1391
1419
1448
1476
1506
1537
1567
1598
1629
7661
1692
1724
1757
BHP
3.868
4.030
4.184
4.351
4.563
4.816
5.095
5.423
5.777
6.132
6.500
6.880
7.261
7.671
8.095
8.551
9.009
9.499
10.015
1.25” SP
RPM
832
843
856
875
899
927
956
986
1017
1048
1079
1111
1144
1177
1211
1245
1280
1314
1349
1384
1420
1456
1493
1529
1566
1603
1639
1677
1714
1751
BHP
1.035
1.098
1.167
1.260
1.376
1.514
1.667
1.819
1.983
2.157
2.341
2.543
2.759
2.987
3.236
3.498
3.783
4.074
4.389
4.721
5.071
5.436
5.831
6.232
6.665
7.118
7.578
8.086
8.602
9.141
3.50” SP
RPM
1390
1401
1413
1426
1439
1459
1483
1508
1536
1564
1593
1623
1653
1684
1714
1746
1777
1808
20
BHP
4.810
5.001
5.179
5.372
5.569
5.835
6.155
6.495
6.880
7.279
7.709
8.140
8.565
9.022
9.478
9.984
10.489
11.013
1.50” SP
RPM
911
923
935
952
975
1002
1030
1059
1090
1120
1152
1183
1215
1248
1281
1315
1349
1383
1418
1452
1487
1522
1558
1594
1631
1667
1704
1741
1777
BHP
1.358
1.439
1.517
1.619
1.751
1.909
2.081
2.263
2.452
2.645
2.863
3.085
3.327
3.586
3.857
4.150
4.459
4.783
5.133
5.489
5.873
6.275
6.695
7.134
7.606
8.084
8.598
9.134
9.675
4” SP
RPM
1484
1494
1506
1519
1532
1548
1570
1594
1620
1648
1677
1706
1735
1766
1796
1827
1858
BHP
5.831
6.050
6.251
6.470
6.693
6.951
7.286
7.653
8.058
8.501
8.977
9.470
9.943
10.447
10.949
11.486
12.041
37
38 1/2
1.75” SP
RPM
985
996
1009
1024
1047
1072
1101
1129
1159
1190
1221
1252
1284
1315
1348
1382
1416
1450
1484
1518
1553
1588
1623
1658
1694
1730
1767
1803
BHP
1.719
1.808
1.904
2.012
2.165
2.335
2.538
2.745
2.958
3.184
3.422
3.671
3.942
4.216
4.518
4.844
5.185
5.542
5.916
6.307
6.727
7.167
7.625
8.096
8.593
9.111
9.666
10.226
4.50” SP
RPM
1573
1582
1594
1607
1620
1633
1654
1677
1701
1729
1758
1786
1815
1845
-
BHP
6.929
7.163
7.397
7.641
7.891
8.143
8.500
8.895
9.315
9.804
10.326
10.849
11.408
11.951
-
2” SP
RPM
1054
1066
1078
1093
1115
1140
1169
1197
1227
1257
1288
1319
1350
1382
1414
1447
1480
1514
1548
1582
1617
1651
1686
1721
1756
1792
1828
BHP
2.113
2.218
2.322
2.445
2.613
2.806
3.035
3.268
3.517
3.762
4.027
4.305
4.595
4.909
5.237
5.584
5.947
6.337
6.745
7.171
7.628
8.090
8.586
9.102
9.639
10.197
10.776
5” SP
RPM
1657
1667
1679
1691
1704
1717
1735
1757
1781
1807
1835
1864
-
BHP
8.092
8.365
8.633
8.888
9.164
9.444
9.795
10.215
10.674
11.179
11.730
12.318
-
21
US24 | BELT DRIVE
40 7/8
17 1/4
9.0
8.0
1 1/2
26
27 5/8
6.0
1550 RPM
1450 RPM
5.0
1350 RPM
4.0
/2 H
3H
950 RPM
1 1/2
550 RPM
350 RPM
2000
OV
(FPM)
2900
3275
3650
4025
4400
4775
5150
5525
5900
6275
6650
7025
7400
7775
8150
8525
8900
9275
9650
10025
10400
10775
11150
11525
11900
12275
12650
13025
853
963
1074
1184
1294
1404
1515
1625
1735
1846
1956
2066
2176
2287
2397
2507
2618
2728
2838
2949
3059
3169
3279
3390
3500
3610
3721
3831
CFM
OV
(FPM)
2900
3275
3650
4025
4400
4775
5150
5525
5900
6275
6650
7025
7400
7775
8150
8525
8900
9275
9650
10025
10400
10775
853
963
1074
1184
1294
1404
1515
1625
1735
1846
1956
2066
2176
2287
2397
2507
2618
2728
2838
2949
3059
3169
HP
4000
Maximum RPM: 1575
CFM
P
2H
P
P
6000
.25” SP
BHP
0.191
0.233
0.286
0.348
0.415
0.493
0.583
0.680
0.795
0.921
1.059
1.216
1.389
1.576
1.781
2.003
2.250
2.510
2.798
3.107
3.438
3.792
4.170
4.572
5.000
5.454
5.947
6.547
8000
10000
AIR FLOW - CFM
2.25” SP
RPM
972
980
989
997
1008
1015
1023
1034
1050
1068
1090
1113
1136
1161
1187
1213
1239
1266
1297
1328
1360
1392
BHP
1.849
2.017
2.191
2.362
2.549
2.693
2.835
2.987
3.166
3.368
3.615
3.884
4.166
4.435
4.724
5.025
5.339
5.660
6.090
6.520
6.986
7.473
BHP
0.344
0.400
0.461
0.527
0.601
0.696
0.803
0.925
1.057
1.199
1.353
1.521
1.702
1.904
2.129
2.362
2.618
2.901
3.195
3.518
3.863
4.230
4.620
5.034
5.472
5.949
6.441
6.974
2.50” SP
RPM
1022
1029
1037
1046
1056
7066
1072
1081
1093
1110
1128
1150
1173
1196
1221
1246
1272
1299
1325
1354
1386
1418
12000
14000
16000
.50” SP
RPM
500
522
546
572
599
630
662
695
728
762
796
830
864
899
935
970
1006
1043
1079
1116
1153
1190
1227
1264
1301
1339
1376
1414
25
46
ANGLE
SUPPORTS
UNIT SIZES
18 & UP
24
29
Max BHP: (RPM/706)3
RPM
408
437
469
502
535
569
604
638
674
710
746
783
820
857
894
931
969
1006
1044
1082
1120
1158
1196
1234
1272
1310
1349
1387
1 1/2
31 1/2
P
750 RPM
0
59 3/8
HP
5H
1100 RPM
2.0
10
71
1250 RPM
3.0
1.0
BHP
2.091
2.274
2.458
2.653
2.856
3.055
3.203
3.361
3.538
3.746
3.971
4.247
4.546
4.859
5.161
5.467
5.799
6.158
6.517
6.936
7.420
7.927
.75” SP
RPM
588
601
618
611
664
690
716
745
776
808
841
874
907
941
975
1009
1044
1078
1113
1149
1184
1220
1257
1293
1330
1366
1403
1440
BHP
0.534
0.590
0.653
0.741
0.831
0.927
1.030
1.155
1.299
7.461
1.641
1.836
2.035
2.253
2.487
2.736
3.011
3.295
3.607
3.948
4.298
4.677
5.091
5.516
5.978
6.452
6.966
7.506
2.75” SP
RPM
1076
1084
1093
1101
1112
1120
1126
1137
1150
1167
11864
1208
1231
1254
1279
1304
1330
1357
1383
1411
1442
BHP
2.536
2.740
2.953
3.163
3.391
3.582
3.746
3.932
4.131
4.361
4.621
4.926
5.256
5.600
5.933
6.269
6.632
7.024
7.416
7.855
8.364
1” SP
RPM
671
678
688
704
725
748
772
798
824
851
883
914
947
979
1012
1046
1079
1113
1147
1182
1216
1251
1286
1322
1357
1393
1429
1466
BHP
0.748
0.812
0.878
0.958
1.062
1.183
1.305
1.434
1.571
1.723
1.917
2.119
2.349
2.587
2.849
3.122
3.402
3.708
4.032
4.386
4.750
5.145
5.563
6.017
6.480
6.971
7.498
8.620
3” SP
RPM
1121
1128
1137
1146
1156
1166
1172
1180
1191
1206
1222
1243
1265
1287
1310
1335
1361
1387
1413
1440
1466
BHP
2.803
3.021
3.250
3.486
3.730
3.972
4.150
4.341
4.543
4.777
5.018
5.328
5.662
6.010
6.386
6.747
7.128
7.523
7.933
8.375
8.815
1.25” SP
RPM
741
751
758
768
783
802
824
847
873
899
925
952
984
1016
1048
1080
1113
1146
1180
1213
1247
1282
1316
1351
1385
1420
1455
1491
BHP
0.953
1.053
1.133
1.216
1.313
1.431
1.572
1.727
1.883
2.048
2.221
2.412
2.654
2.912
3.186
3.477
3.795
4.126
4.473
4.827
5.212
5.631
6.059
6.522
6.995
7.505
8.041
8.620
3.50” SP
RPM
1213
1221
1229
1238
1248
1259
1265
1271
1283
1295
1312
1329
1352
1374
1397
1419
1445
1471
1497
1523
20
39
40 1/2
BHP
3.610
3.872
4.130
4.405
4.690
4.983
5.194
5.401
5.647
5.892
6.183
6.482
6.878
7.274
7.701
8.124
8.554
9.000
9.461
9.937
1.50” SP
RPM
805
814
825
831
841
856
874
898
919
943
969
995
1021
1050
1081
1113
1145
1178
1211
7244
1277
1311
1344
1379
1413
1447
1482
1517
BHP
1.165
1.283
1.408
1.497
1.595
1.713
1.847
2.014
2.197
2.379
2.570
2.772
2.984
3.234
3.518
3.828
4.156
4.514
4.892
5.291
5.685
6.114
6.549
7.035
7.530
8.048
8.607
9.192
4” SP
RPM
1292
1299
1307
1316
1325
1335
1346
1352
1358
1369
1380
1396
1413
1434
1456
1478
1501
1525
-
22
19
RPM
BHP
7.0
0.0
28 1/2
BHP
4.213
4.508
4.802
5.110
5.426
5.751
6.086
6.328
6.566
8.838
7.110
7.425
7.764
8.177
8.621
9.080
9.574
10.075
-
1.75” SP
RPM
864
873
883
892
898
909
924
942
964
986
1010
1035
1061
1088
1114
1145
1176
1208
1240
1273
1306
1339
1372
1406
1439
1473
1507
1542
BHP
1.385
1.520
1.663
1.795
1.899
2.017
2.154
2.310
2.503
2.706
2.926
3.137
3.367
3.618
3.871
4.190
4.526
4.892
5.277
5.696
6.137
6.600
7.060
7.554
8.054
6.594
9.158
9.766
4.50” SP
RPM
1373
1380
1389
1398
1407
1417
1428
1434
1440
1450
1461
1477
1493
1512
1534
-
BHP
5.159
5.489
5.831
6.180
6.536
6.899
7.277
7.548
7.816
8.109
8.413
8.776
9.136
9.560
10.053
-
2” SP
RPM
919
928
937
947
956
962
973
989
1006
1028
1051
1074
1099
1125
1151
1178
1206
1237
1269
1301
1333
1366
1399
1432
1465
1498
1532
1566
BHP
1.612
1.764
1.921
2.083
2.230
2.346
2.481
2.642
2.813
3.033
3.273
3.522
3.759
4.018
4.289
4.584
4.904
5.276
5.681
6.106
6.552
7.036
7.542
8.072
8.598
9.142
9.728
10.339
5” SP
RPM
1444
1450
1458
1467
1476
1484
1495
1506
1512
1518
1528
1539
1554
-
BHP
5.840
6.195
6.567
6.950
7.340
7.722
8.138
8.558
8.855
9.153
9.480
9.818
10.208
-
US30 | BELT DRIVE
21 7/8
21 13/16
8.0
5.0
4.0
1 3/4
RPM
BHP
1450 RPM
1400 RPM
1350 RPM
1300 RPM
1250 RPM
1200 RPM
6.0
23 1/8
34 5/8
31 13/16
72 1/2
2
20
1100 RPM
31 1/2
56 1/2
P
H
P
H
7
800 RPM
P
30
37
300 RPM
0
4000
8000
Maximum RPM: 1450
CFM
OV
(FPM)
6000
6500
7000
7500
8000
8500
9000
9500
10000
11000
10500
11500
12000
12500
13000
13500
14000
14500
15000
15500
16000
16500
17000
17500
18000
18500
19000
19500
20000
20500
1179
1277
1376
1474
1572
1670
1769
1867
1965
2162
2063
2260
2358
2456
2555
2653
2751
2849
2948
3046
3144
3242
3341
3439
3537
3635
3734
3832
3930
4028
CFM
OV
(FPM)
9000
9500
10000
10500
11000
11500
12000
12500
13000
13500
14000
14500
15000
15500
16000
16500
17000
17500
18000
18500
1769
1867
1965
2063
2162
2260
2358
2456
2555
2653
2751
2849
2948
3046
3144
3242
3341
3439
3537
3635
12000
16000
AIR FLOW - CFM
Max BHP: (RPM/524)3
.25” SP
RPM
430
456
483
510
537
564
592
620
649
707
678
736
765
794
824
853
882
912
942
971
1001
1030
1060
1090
1120
1149
1179
1209
1239
1269
BHP
0.527
0.621
0.729
0.848
0.978
1.122
1.284
1.455
1.650
2.091
1.861
2.339
2.607
2.896
3.217
3.549
3.903
4.296
4.714
5.143
5.615
6.110
6.654
7.229
7.837
8.455
9.129
9.838
10.583
11.365
2.25” SP
RPM
893
912
933
955
975
995
1016
1037
1058
1079
1101
1123
1145
1167
1190
1213
1238
1264
1290
1316
BHP
4.771
5.140
5.574
6.050
6.443
6.839
7.273
7.725
8.195
8.656
9.153
9.670
10.206
10.761
11.366
11.991
12.686
13.439
14.222
15.036
ANGLE
SUPPORTS
UNIT SIZES
18 & UP
P
P
H
5H
3H
500 RPM
2
1/
700 RPM
1.0
0.0
P
H
900 RPM
2.0
38
15
1000 RPM
3.0
10
7.0
35 1/8
BHP
0.830
0.939
1.054
1.179
1.325
1.496
1.681
1.882
2.104
2.593
2.340
2.865
3.168
3.478
3.820
4.171
4.558
4.954
5.389
5.850
6.338
6.853
7.416
7.989
8.591
9.223
9.912
10.608
11.365
12.129
2.50” SP
RPM
925
942
961
982
1003
1024
1044
1065
1085
1106
1128
1149
1171
1193
1215
1238
1260
1284
1309
1335
24000
.50” SP
RPM
493
515
537
559
583
609
635
661
688
742
715
769
797
824
853
881
910
938
967
996
1025
1054
1084
1113
1142
1171
1201
1230
1260
1289
20000
BHP
5.250
5.602
6.012
6.493
6.999
7.465
7.902
8.379
8.851
9.365
9.911
10.427
10.990
11.573
12.176
12.832
13.479
14.208
14.985
15.826
.75” SP
RPM
548
569
590
610
632
654
676
699
724
777
750
803
829
856
883
910
937
965
992
1020
1049
1077
1106
1135
1163
1192
1221
1250
1279
1308
BHP
1.140
1.280
1.424
1.571
1.734
1.906
2.090
2.296
2.530
3.081
2.190
3.379
3.695
4.036
4.398
4.782
5.188
5.635
6.089
6.576
7.096
7.623
8.199
8.804
9.415
10.080
10.776
11.505
12.268
13.064
2.75” SP
RPM
956
972
989
1008
1029
1051
1071
1092
1112
1133
1154
1175
1196
1218
1240
1262
1284
1307
1329
1354
BHP
5.752
6.099
6.487
6.940
7.469
8.046
8.542
9.045
9.541
10.081
10.642
11.220
11.780
12.390
13.021
13.673
14.347
15.078
15.798
16.639
1” SP
RPM
596
615
636
657
677
698
719
741
763
808
786
834
860
886
912
939
965
992
1019
1046
1073
1101
1128
1156
1194
1212
1241
1269
1298
1327
BHP
1.418
1.587
1.787
1.970
2.152
2.354
2.561
2.784
3.020
3.544
3.281
3.869
4.214
4.579
4.965
5.390
5.817
6.277
6.761
7.270
7.805
8.389
8.978
9.620
10.270
10.942
11.671
12.403
13.198
14.027
3” SP
RPM
988
1001
1018
1035
1054
1076
1097
1118
1138
1158
1179
1200
1221
1242
1264
1286
1308
1330
1352
1375
BHP
6.309
6.612
7.017
7.442
7.940
8.542
9.147
9.718
10.238
10.776
11.362
11.968
12.565
13.211
13.869
14.548
15.250
15.974
16.721
17.530
1.25” SP
RPM
643
659
676
698
719
739
760
780
802
845
823
868
890
914
940
966
992
1018
1045
1071
1098
1125
1152
1179
1206
1233
1261
1288
1316
1345
BHP
1.748
1.906
2.087
2.338
2.585
2.803
3.044
3.285
3.557
4.110
3.820
4.431
4.151
5.116
5.530
5.966
6.425
6.908
7.436
7.967
8.533
9.125
9.745
10.393
11.070
11.777
12.543
13.313
14.125
14.986
3.50” SP
RPM
1074
1089
1106
1124
1144
1165
1186
1207
1227
1248
1268
1289
1310
1331
1353
1375
1397
1419
25
46 3/8
50 3/8
BHP
8.140
8.544
9.029
9.557
10.178
10.859
11.567
12.228
12.834
13.491
14.137
14.838
15.562
16.290
17.045
17.824
18.626
19.453
1.50” SP
RPM
702
717
735
755
776
797
817
838
880
859
902
924
946
969
992
1017
1043
1069
1095
1122
1148
1175
1201
1228
1255
1282
1309
1337
1364
BHP
2.271
2.447
2.670
2.939
3.239
3.519
3.785
4.079
4.697
4.387
5.029
5.377
5.141
6.140
6.556
7.023
7.533
8.068
8.628
9.239
9.853
10.519
11.170
11.877
12.614
13.382
14.182
15.048
15.914
4” SP
RPM
1144
1157
1174
1191
1209
1230
1251
1273
1293
1313
1334
1355
1375
1396
1417
1439
-
BHP
9.811
10.213
10.754
11.318
11.935
12.692
13.479
14.330
15.031
15.725
16.476
17.252
18.012
18.835
19.677
20.532
-
1.75” SP
RPM
758
773
790
809
831
852
872
913
893
934
956
978
1000
1022
1044
1067
1092
1118
1144
1170
1197
1223
1249
1276
1303
1330
1357
1384
BHP
2.857
3.062
3.308
3.601
3.959
4.302
4.605
5.272
4.939
5.638
6.014
6.405
6.814
7.239
7.682
8.166
8.705
9.293
9.907
10.548
11.245
11.944
12.671
13.451
14.250
15.081
15.944
16.841
4.50” SP
RPM
1210
1223
1238
1255
1273
1293
1314
1335
1356
1377
1397
1417
1438
-
BHP
11.586
12.041
12.572
13.198
13.876
14.666
15.533
16.431
17.349
18.151
18.937
19.745
20.620
-
2” SP
RPM
811
825
843
862
883
904
945
924
966
986
1008
1029
1051
1073
1095
1118
1141
1166
1192
1218
1244
1270
1296
1323
1349
1376
1403
BHP
3.501
3.720
4.015
4.346
4.734
5.140
5.857
5.482
6.248
6.637
7.074
7.487
7.939
8.410
8.898
9.432
9.986
10.601
11.270
11.968
12.694
13.450
14.236
15.086
15.936
16.832
17.758
5” SP
RPM
1273
1285
1300
1317
1335
1353
1374
1395
1416
1437
-
BHP
13.474
13.949
14.524
15.213
15.959
16.735
17.682
18.662
19.675
20.640
-
23
US36 | BELT DRIVE
1100 RPM
1050 RPM
5.0
38 1/4
950 RPM
HP
20
41 1/8
HP
82 1/4
2 3/8
HP
700 RPM
44
7
2
1/
P
P
H
5H
0
4000
8000
Maximum RPM: 1125
CFM
OV
(FPM)
9000
9650
10300
10950
11600
12250
12900
13550
14200
14850
15500
16150
16800
17450
18100
18750
19400
20050
20700
21350
22000
22650
23300
23950
24600
25250
25900
26550
27200
27850
28500
29150
1193
1280
1366
1452
1538
1624
1711
1797
1883
1969
2055
2142
2228
2314
2400
2486
2573
2659
2745
2831
2917
3004
3090
3176
3262
3348
3435
3521
3607
3693
3779
3866
CFM
OV
(FPM)
13550
14200
14850
15500
16150
16800
17450
18100
18750
19400
20050
20700
21350
22000
22650
23300
23950
24600
1797
1883
1969
2055
2142
2228
2314
2400
2486
2573
2659
2745
2831
2917
3004
3090
3176
3262
ANGLE
SUPPORTS
UNIT SIZES
18 & UP
34
44 3/4
300 RPM
0.0
12000
16000
20000
AIR FLOW - CFM
Max BHP: (RPM/367)3
.25” SP
RPM
360
380
401
421
442
462
483
503
524
546
567
589
611
633
656
678
700
722
744
767
789
811
834
856
878
901
923
946
968
991
1013
1036
BHP
0.885
1.033
1.206
1.387
1.589
1.799
2.039
2.287
2.569
2.890
3.220
3.594
3.995
4.426
4.910
5.405
5.932
6.492
7.088
7.749
8.419
9.127
9.909
10.698
11.528
12.442
13.359
14.367
15.376
16.482
17.588
18.797
2.25” SP
RPM
725
736
751
765
779
794
809
825
841
857
874
893
911
930
949
969
988
1007
BHP
7.522
7.912
8.434
8.943
9.472
10.058
10.669
11.304
11.949
12.617
13.346
14.139
14.914
15.770
16.658
17.634
18.593
19.601
24000
BHP
1.284
1.454
1.627
1.839
2.057
2.312
2.588
2.886
3.206
3.567
3.935
4.335
4.738
5.167
5.647
6.156
6.688
7.237
7.870
8.507
9.212
9.956
10.740
11.565
12.431
13.341
14.294
15.341
16.387
17.482
18.624
19.816
2.50” SP
RPM
752
762
774
788
802
817
831
846
861
877
893
910
927
946
965
984
1003
1022
32000
.50” SP
RPM
400
418
436
456
475
495
515
535
555
576
596
617
637
657
678
699
719
740
762
783
805
827
849
871
893
915
937
960
982
1004
1026
1048
28000
BHP
8.321
8.728
9.195
9.736
10.296
10.916
11.519
12.186
12.864
13.565
14.292
15.094
15.890
16.780
17.703
18.661
19.654
20.682
.75” SP
RPM
443
457
472
489
505
524
543
562
582
601
621
641
661
682
702
723
743
764
784
804
825
846
666
887
908
929
951
973
995
1017
1039
1061
BHP
1.737
1.917
2.119
2.347
2.573
2.842
3.129
3.435
3.784
4.144
4.548
4.978
5.435
5.946
6.461
7.034
7.595
8.210
8.825
9.471
10.185
10.935
11.882
12.505
13.367
14.268
15.258
16.294
17.377
18.508
19.687
20.917
2.75” SP
RPM
778
788
799
810
824
838
853
867
882
897
913
929
945
962
980
999
1018
1037
BHP
9.112
9.572
10.058
10.532
11.127
11.738
12.414
13.071
13.797
14.548
15.319
16.107
16.921
17.818
18.728
19.721
20.748
21.812
1” SP
RPM
482
495
509
524
538
554
571
588
607
626
645
661
684
704
724
744
764
784
805
825
846
866
886
907
927
946
968
989
1010
1031
1052
1073
BHP
2.209
2.410
2.634
2.886
3.137
3.420
3.732
4.052
4.414
4.797
5.203
5.632
6.124
6.646
7.198
7.780
8.393
9.038
9.752
10.465
11.248
12.002
12.791
13.660
14.521
15.468
16.405
17.433
18.504
19.619
20.779
21.985
3” SP
RPM
806
814
823
834
846
859
873
888
902
917
932
947
963
980
996
1013
1032
1051
BHP
9.964
10.448
10.908
11.438
11.996
12.602
13.288
13.999
14.710
15.494
16.306
17.108
17.955
18.887
19.792
20.752
21.813
22.912
1.25” SP
RPM
523
532
544
557
571
586
600
616
632
649
667
686
705
724
744
763
783
803
823
843
864
884
905
925
946
966
986
1007
1027
1048
1068
1089
BHP
2.752
2.951
3.185
3.438
3.720
4.037
4.350
4.704
5.066
5.471
5.886
6.349
6.836
7.348
7.918
8.502
9.150
9.831
10.545
11.294
12.120
12.942
13.847
14.746
15.726
16.667
17.647
18.721
19.781
20.941
22.085
23.335
3.50” SP
RPM
861
866
873
881
891
902
914
927
941
956
970
985
999
1014
1030
1046
1063
1079
BHP
11.707
12.218
12.732
13.277
13.863
14.476
15.129
15.835
16.607
17.458
18.280
19.186
20.061
21.023
21.994
22.994
24.093
25.156
1.50” SP
RPM
565
571
579
590
601
610
630
645
659
675
691
708
726
745
764
783
802
821
841
861
881
901
921
941
962
982
1003
1023
1044
1064
1084
1105
BHP
3.335
3.552
3.782
4.049
4.308
4.650
5.002
5.387
5.765
6.190
6.623
7.106
7.607
8.155
8.729
9.331
9.960
10.625
11.375
12.160
12.981
13.839
14.734
15.668
16.694
17.710
18.823
19.925
21.102
22.246
23.431
24.727
4” SP
RPM
918
923
930
937
945
955
967
978
992
1006
1021
1035
1050
1064
1079
-
24
66 3/8
P
H
600 RPM
500 RPM
1.0
38 9/16
15
800 RPM
2.0
1 3/4
25
900 RPM
3.0
28 1/4
RPM
BHP
1000 RPM
4.0
35 1/8
59 1/8
25 7/8
10
6.0
BHP
14.033
14.623
15.252
15.846
16.437
17.111
17.852
18.545
19.408
20.292
21.263
22.200
23.231
24.224
25.315
-
25
51 1/2
55 1/2
1.75” SP
RPM
609
615
623
633
644
658
672
686
701
716
732
748
765
783
802
820
839
859
878
898
917
937
957
977
998
1018
1038
1059
1079
1100
1120
BHP
4.159
4.418
4.694
4.989
5.200
5.666
6.058
6.467
6.923
7.400
7.890
8.399
8.963
9.549
10.185
10.810
11.502
12.267
13.021
13.876
14.722
15.653
16.623
17.633
18.741
19.836
20.973
22.217
23.445
24.785
26.090
4.50” SP
RPM
972
977
983
990
997
1007
1017
1029
1041
1055
1069
1084
-
BHP
16.527
17.188
17.889
18.551
19.211
19.96
20.710
21.538
22.385
23.356
24.355
25.451
-
2” SP
RPM
651
657
664
674
685
698
712
726
741
756
771
787
803
820
838
857
876
895
914
933
953
973
993
1013
1033
1053
1073
1093
1114
-
BHP
5.076
5.376
5.671
6.005
6.352
6.755
7.195
7.653
8.163
8.695
9.236
9.799
10.386
11.036
11.699
12.427
13.184
13.974
14.974
15.648
16.604
17.611
18.658
19.747
20.879
22.053
23.272
24.535
25.914
-
5” SP
RPM
1029
1034
1041
1048
1057
1066
1077
1089
-
BHP
19.952
20.696
21.448
22.192
22.992
23.768
24.637
25.566
-
US44 | BELT DRIVE
79 7/8
37 1/2
7.0
36 5/16
35 1/2
3 1/4
834 RPM
6.0
RPM
BHP
785 RPM
5.0
30
729 RPM
4.0
25
662 RPM
3.0
15
HP
579 RPM
459 RPM
46
99
3 3/4
0
4000
12000
Maximum RPM: 880
CFM
OV
(FPM)
9000
10000
11000
12000
13000
14000
15000
16000
17000
18000
19000
20000
21000
22000
23000
24000
25000
26000
27000
28000
29000
30000
31000
32000
33000
34000
35000
36000
783
870
957
1043
1130
1217
1304
1391
1478
1565
1652
1739
1826
1913
2000
2087
2174
2261
2348
2435
2522
2609
2696
2783
2870
2957
3043
3130
CFM
OV
(FPM)
13000
14000
15000
16000
17000
18000
19000
20000
21000
22000
23000
24000
25000
26000
27000
28000
29000
30000
31000
32000
33000
34000
35000
36000
1130
1217
1304
1391
1478
1565
1652
1739
1826
1913
2000
2087
2174
2261
2348
2435
2522
2609
2696
2783
2870
2957
3043
3130
ANGLE
SUPPORTS
UNIT SIZES
18 & UP
52 1/2
58 11/16
8000
16000
20000 24000 28000
AIR FLOW - CFM
Max BHP: (RPM/268)3
0.25
RPM
237
252
267
283
299
316
333
351
368
386
404
422
440
458
477
495
514
532
551
570
589
608
626
645
664
683
702
721
BHP
0.670
0.800
0.950
1.120
1.320
1.540
1.790
2.060
2.370
2.720
3.090
3.510
3.960
4.450
4.990
5.570
6.200
6.880
7.600
8.380
9.220
10.110
11.060
12.060
13.140
14.270
15.470
16.740
2.25
RPM
551
559
567
576
586
596
607
618
630
643
656
669
682
696
710
725
740
755
770
785
801
817
833
849
BHP
7.190
7.730
8.310
8.910
9.540
10.210
10.910
11.650
12.430
13.250
14.120
15.030
15.990
17.000
18.070
19.180
20.360
21.590
22.880
24.230
25.640
27.120
28.670
30.290
32000
BHP
1.150
1.320
1.510
1.720
1.960
2.220
2.510
2.830
3.180
3.570
3.990
4.450
4.940
5.480
6.060
6.690
7.360
8.080
8.850
9.670
10.550
11.490
12.480
13.530
14.650
15.830
17.070
18.390
40000
44000
BHP
8.000
8.590
9.210
9.850
10.530
11.230
11.970
12.750
13.570
14.440
15.340
16.300
17.300
18.350
19.450
20.610
21.820
23.090
24.420
25.820
27.270
28.790
30.380
-
0.75
RPM
330
340
351
362
375
388
402
416
431
446
462
477
494
510
526
543
560
577
595
612
630
647
665
683
701
719
737
755
2.50
RPM
576
583
591
599
608
618
628
639
651
663
675
688
701
714
728
742
757
771
786
801
817
832
848
-
36000
0.50
RPM
287
298
311
325
339
354
369
385
401
417
434
450
468
485
502
520
538
555
573
591
610
628
646
664
683
701
720
739
78
52 1/4
387 RPM
338 RPM
1.0
0.0
HP
HP
10
HP
7.5
HP
526 RPM
2.0
20
HP
46 13/16
46 3/4
BHP
1.670
1.880
2.110
2.360
2.640
2.940
3.270
3.630
4.020
4.450
4.910
5.410
5.950
6.530
7.150
7.820
8.530
9.300
10.110
10.980
11.900
12.880
13.920
15.020
16.180
17.400
18.690
20.050
1.00
RPM
370
378
387
397
408
420
433
446
459
474
488
503
518
534
550
566
582
599
615
632
649
666
684
701
719
736
754
772
2.75
RPM
607
614
622
630
640
649
660
671
682
694
706
719
732
746
759
773
788
802
817
832
847
-
BHP
9.470
10.130
10.810
11.530
12.270
13.060
13.880
14.740
15.640
16.580
17.580
18.620
19.710
20.850
22.050
23.300
24.610
25.990
27.420
28.910
30.480
-
BHP
2.210
2.460
2.730
3.020
3.340
3.680
4.050
4.450
4.890
5.350
5.860
6.400
6.980
7.600
8.260
8.970
9.730
10.540
11.400
12.310
13.270
14.290
15.370
16.510
17.720
18.980
20.320
21.720
1.25
RPM
406
413
421
430
440
450
462
474
487
500
514
528
542
557
572
588
603
619
635
652
668
685
702
719
736
753
770
788
3.00
RPM
630
637
644
652
661
670
680
690
701
713
725
737
750
763
776
790
804
818
832
847
-
BHP
10.350
11.060
11.780
12.540
13.330
14.150
15.010
15.910
16.850
17.840
18.870
19.950
21.080
22.270
23.500
24.800
26.150
27.560
29.030
30.570
-
BHP
2.770
3.070
3.380
3.710
4.070
4.450
4.860
5.300
5.780
6.280
6.830
7.410
8.030
8.690
9.400
10.150
10.950
11.800
12.700
13.650
14.660
15.720
16.840
18.030
19.270
20.580
21.960
23.410
3.50
RPM
680
686
693
701
710
719
728
738
749
760
772
784
796
809
822
835
849
-
BHP
12.950
13.760
14.610
15.480
16.380
17.330
18.310
19.330
20.400
21.510
22.670
23.880
25.140
26.460
27.830
29.260
30.750
-
1.50
RPM
446
453
461
470
479
490
501
513
525
538
551
565
579
594
609
624
639
655
671
687
703
719
736
752
769
786
803
BHP
3.700
4.050
4.430
4.820
5.250
5.700
6.180
6.690
7.230
7.820
8.440
9.100
9.800
10.550
11.340
12.180
13.070
14.010
15.010
16.060
17.160
18.330
19.560
20.840
22.200
23.620
25.110
1.75
RPM
483
490
498
507
517
527
538
550
562
574
588
601
615
629
644
659
674
689
705
721
736
753
769
785
802
819
4.00
RPM
726
733
740
748
756
765
774
784
795
805
817
828
840
853
-
BHP
15.790
16.720
17.680
18.670
19.690
20.750
21.860
23.000
24.190
25.430
26.720
28.070
29.460
30.910
-
25 3/8
61 7/8
64 13/16
BHP
4.740
5.160
5.590
6.060
6.550
7.070
7.620
8.210
8.830
9.490
10.190
10.930
11.720
12.550
13.430
14.370
15.350
16.380
17.470
18.620
19.830
21.100
22.430
23.830
25.290
26.820
2.00
RPM
518
525
533
542
552
562
573
585
597
609
622
636
649
663
678
692
707
722
738
753
769
785
801
817
834
4.50
RPM
771
777
784
792
800
809
818
828
838
849
860
-
BHP
18.870
19.910
20.990
22.100
23.250
24.430
25.660
26.930
28.250
29.620
31.040
-
BHP
5.900
6.380
6.890
7.420
7.980
8.570
9.200
9.860
10.560
11.300
12.080
12.910
13.780
14.700
15.680
16.700
17.780
18.910
20.100
21.350
22.660
24.030
25.470
26.970
28.550
5.00
RPM
813
819
826
834
842
851
860
870
-
BHP
22.190
23.360
24.550
25.780
27.050
28.360
29.720
31.120
-
25
SOUND POWER LEVELS, SONE RATINGS, & SOUND CLASSIFICATION GUIDE
Sound Power Levels
Since any mechanical device generates some sound energy into
the air, fans will create some noise. Because of the great number
of factors influencing sound output it is invalid to compare fans
based on RPM, tip speed or outlet velocity. The only accurate
basis of comparison is the sound power level generated by the
fan at the required point of operation.
Having sound power levels for a specific fan at a specific
operating point allows the system designer to determine the
theoretical sound pressure level at any point in the occupied
space. AMCA Publication 303 and the ASHRAE Guides provide
more information on this process. Another typical application
of sound power levels is to compare similar fans. Generally
differences of 6 dB in the 63 Hz band and 3 dB in all other bands
are considered insignificant.
System designers use many methods to predict acoustic
acceptability of an occupied space.
The A‑weighted sound pressure level provides a single number
that corresponds well to the human judgement of relative
loudness. OSHA bases their requirements regarding exposure
to noise on A‑weighted sound pressure levels. The disadvantage
of this method is that A-weighted sound pressure levels do not
provide information as to the quality of the sound. Noise Criteria
(NC) curves are also widely used. To determine the NC level,
the sound power spectrum is compared to defined limits. Other
methods include RC curves, Sones, SIL and Noise Rating
Curves.
Each method relies on sound pressure level information because
the human ear “hears” sound pressure fluctuations, not sound
power (watts). Sound pressure is a function of the attenuation
of the space and the distance from the source. Consider a 100
watt light bulb. It provides adequate light for a closet, but not
for a classroom, and in a stadium it would be imperceptible.
While the light source was the same power (100 watts), the
brightness level changed dramatically. Similarly, the same sound
power level (acoustical energy) produces greatly different sound
pressure levels (noise).
Sone Ratings
YORK® by Johnson Controls has provided sone ratings to allow
designers to make an educated judgment as to the noise level
a fan will develop in a space. Sone ratings are a loudness index
developed from sound power level data. The calculation is at 5’
from the fan inlet and in front of a reflecting plane (hard wall).
Sones are weighted similarly to the A-weighting scale in that
more weight is given to frequencies that people can hear “well”
and less weight to frequencies that people do not hear “well”. A
significant feature of the sone scale is that it is linear rather than
logarithmic. This means that 40 sones is 33% louder than 30
sones, as opposed to 40 dB being twice as loud as 30 dB.
Since the sone rating is determined from well defined assumptions
and is linear in nature, it is ideal for comparing different fans
moving air at the same CFM and SP. When using sones for this
purpose, differences of 3 sones are considered negligible. The
suggested loudness level chart below is a practical guideline for
acceptable installed performance.
The sone values shown in this catalog are based on the sound
power levels determined above, and calculated in accordance
with AMCA Standard 301 “Methods for Calculating Fan Sound
Ratings from Laboratory Test Data.”
Sound Classification Guide
Suggested Loudness Level
Area
Sone
Levels
Noise
Criteria
NC
dBA (1)
Up to 9
32 to 54
35 to 60
Bingo Hall, Auction Room, Hotel Ballroom, Social Club, Reception Room, Apartment House, Professional Office,
Supervisor Office, Courtroom, School and Classroom, Hospital Ward, Operating Room, Correction Facility.
Moderately
Quiet Sound
9.1 to 13
55 to 59
61 to 65
Lobby/Corridor, Spectator Area, Chicken House, Greenhouse, General Open Office, Restaurant, Night Club,
Department Store, Ticket Sales Office, Casino, Spa, Control Room, Rail, Bus, Plane, Bowling Alley, Print Shop,
Drafting Office, Convention Hall
Average
13.1 to 18
60 to 64
66 to 70
Washroom & Toilet, Retail Shop, Bus Terminal Lounge, Foreman’s Office, Cocktail Lounge, Office Hall & Corridor,
Tabulation & Computation Office, Kitchen Cafeteria, Hotel Garage, Computer Room, Warehouse, Battery Charging Room
Commercial
18.1 to 50
65 to 78
71 to 84
General Storage Area, Restaurant Banquet Room, Swimming Pool, Supermarket, Hotel Kitchen and Laundry,
Welding Booth Department Store Main Floor, Paint Booth, Heat Treating Plant, Tool Maintenance Area
High Sound
50.1 Plus
78.1 to 85+
84.1 to
90+ (2)
Manufacturing Area, Heavy Machine Foundry, Assembly Line, Machine Shops, Punch Press Shop, Light Machine Area,
Boiler Room, Emergency Generator Room, Pump House, Power Plant, Transformer, Steel Mill, Engine Test Room,
Compressor Room, Steel Stamping
Ext. Heavy
Industrial
Types of Areas
(1) dBA range of A-weighted sound levels, in decibels.
(2) Sound levels this high are subject to OSHA Standards for safety, as well as state and local ordinances. Sound attenuation provisions should be considered.
Source: ASHRAE, AMCA Publications.
26
SOUND POWER DATA
US10
US12
Sound Power Levels
CFM
500
700
900
1100
1400
1800
2000
2200
2400
SP
RPM
Sones
0.250
1.000
0.500
1.250
2.000
1.000
2.250
3.500
0.250
1.250
3.000
5.000
0.500
2.000
3.500
5.000
0.250
2.000
4.000
1.000
2.250
3.000
0.500
1.250
2.000
0.250
1.000
951
1435
1337
1702
2026
1793
2252
2668
1659
2107
2650
3201
2151
2675
3058
3404
2589
3126
3586
3067
3419
3596
3192
3385
3586
3415
3573
6.1
12.5
11.0
15.5
20.3
16.5
22.4
24.5
15.8
20.3
24.4
29.4
21.8
24.6
28.3
30.4
22.9
29.3
32.6
28.2
33.2
33.6
28.7
30.2
31.5
29.9
31.3
Sound Power Levels
Octave Band Center Frequency (hz)
63
125
250
500
72
76
75
79
82
79
83
84
78
82
84
90
82
84
87
94
82
88
96
88
94
96
90
93
97
94
96
71
83
81
85
88
86
87
87
85
87
87
90
89
87
90
90
86
90
90
90
91
90
90
90
90
90
90
62
74
72
80
87
81
88
84
80
86
84
88
87
84
87
89
84
87
90
87
89
89
88
89
90
90
90
61
72
70
75
78
76
81
84
77
79
84
87
81
84
86
87
84
87
88
86
89
89
86
87
87
87
87
CFM
SP
RPM
Sones
0.250
1.000
0.500
1.750
0.750
1.500
2.500
1.000
2.250
3.500
1.250
2.750
4.500
0.250
1.750
3.500
5.000
1.500
2.750
4.000
1.000
2.250
3.500
0.750
2.250
0.250
1.750
794
1199
1065
1579
1303
1573
1894
1524
1902
2241
1734
2135
2549
1671
2131
2524
2817
2261
2555
2799
2409
2707
2658
2662
2975
2738
3012
4.7
10.2
8.3
14.3
11.5
14.3
14.8
14.0
15.9
18.3
15.9
18.8
21.6
16.5
21.0
23.8
24.2
24.2
25.7
25.2
27.3
29.7
27.6
22.4
33.3
22.9
24.6
SP
RPM
Sones
0.250
1.500
0.750
2.500
1.000
2.250
3.500
1.500
3.000
4.500
0.250
1.750
3.500
1.000
3.000
5.000
1.500
3.000
4.500
1.000
2.250
3.500
1.000
2.750
0.500
2.250
663
1228
987
1584
1161
1539
1876
1396
1782
2131
1144
1634
2010
1653
2119
2458
1977
2300
2546
1983
2289
2524
2141
2525
2179
2509
5.6
16.0
12.6
21.9
15.0
21.3
22.8
19.0
22.0
26.9
14.6
23.4
25.2
26.2
28.7
32.3
27.7
33.3
34.5
24.4
33.0
36.0
27.1
33.0
27.8
33.2
1000 2000 4000 8000
55
66
65
72
77
74
80
84
73
78
84
85
80
84
85
84
82
85
86
84
87
86
84
84
84
84
84
51
61
60
66
70
68
74
78
68
73
78
81
74
78
80
80
76
81
80
80
82
80
80
80
80
79
79
48
58
56
61
66
62
68
73
60
66
72
77
68
73
76
78
72
77
78
76
79
78
77
78
79
78
78
46
56
53
56
62
59
64
66
56
62
66
73
62
66
71
74
66
73
77
72
77
78
73
74
76
75
76
US13
700
900
1100
1300
1500
1900
2200
2600
3000
3200
63
125
250
500
66
76
72
79
77
79
82
79
82
84
76
83
87
75
83
87
87
84
87
87
85
87
88
87
88
87
88
64
77
73
80
78
80
79
81
79
82
80
81
85
81
82
85
87
83
85
87
85
87
87
86
88
86
86
63
73
71
77
75
77
78
77
80
80
80
82
82
80
85
82
84
85
83
84
83
85
85
83
87
83
84
57
72
68
74
73
74
75
75
77
80
76
81
83
76
84
86
85
87
88
86
91
91
88
83
92
84
85
900
1100
1300
1500
1900
2300
2700
3000
3200
3400
51
63
61
71
66
71
69
71
71
73
72
75
77
73
77
80
80
80
82
81
81
84
83
78
87
78
81
46
58
55
70
62
70
69
68
70
71
72
72
73
73
74
75
76
76
76
76
76
79
78
74
81
74
76
42
55
52
64
58
64
67
63
67
70
67
68
73
67
70
73
74
73
74
75
74
76
76
73
79
74
75
36
50
46
60
53
60
62
58
63
66
62
65
69
62
65
68
70
67
69
70
68
71
72
69
73
70
71
US15
Sound Power Levels
CFM
1000 2000 4000 8000
SP
RPM
Sones
0.250
1.500
0.750
2.250
1.000
2.000
3.000
1.500
2.750
4.000
0.250
1.750
3.500
5.000
1.000
3.000
4.500
1.500
2.500
3.500
1.000
2.000
2.750
0.750
2.250
0.250
1.750
830
1485
1231
1819
1435
1794
2106
1715
2094
2432
1403
1981
2445
2781
1902
2508
2836
2268
2560
2807
2304
2560
2760
2372
2725
2394
2712
5.5
15.3
13.1
19.2
15.7
19.4
22.7
19.4
22.9
27.2
13.9
22.2
27.6
30.6
22.6
29.3
31.5
26.7
29.1
34.2
27.9
29.7
30.5
26.3
30.4
26.6
30.5
Sound Power Levels
63
125
250
500
74
82
78
87
82
86
90
84
89
92
80
86
92
93
85
91
93
88
91
92
89
91
93
92
93
92
92
67
86
84
87
86
87
88
88
88
92
84
87
91
93
86
92
94
89
92
94
89
92
93
91
93
92
93
63
77
75
83
80
83
83
83
83
86
76
82
86
88
82
87
88
84
87
90
85
87
88
85
88
85
87
59
74
72
80
75
81
84
80
84
87
72
84
87
89
86
89
89
88
89
91
89
89
89
86
89
86
89
CFM
1000 2000 4000 8000
55
69
66
74
70
75
78
74
78
81
68
77
82
84
77
83
85
81
83
87
82
83
84
81
84
81
84
50
66
63
71
67
71
74
71
74
77
65
74
77
78
75
78
79
77
78
81
78
78
78
76
79
76
79
44
62
57
68
62
68
71
67
72
74
60
72
75
77
71
76
77
75
76
79
76
76
77
74
77
74
77
40
57
50
63
56
63
67
62
67
70
55
66
70
72
66
72
73
70
72
75
70
72
72
70
72
70
72
1150
1450
1750
2050
2650
3400
4000
4450
4900
5200
63
125
250
500
72
88
77
92
87
94
87
93
88
90
85
95
88
94
88
92
85
89
92
88
89
91
90
93
90
92
70
87
84
91
85
90
88
87
88
90
86
89
89
93
89
92
88
91
93
89
91
92
90
93
90
92
63
78
73
84
78
83
86
82
85
87
76
86
87
89
89
89
90
90
89
86
89
90
87
89
87
89
60
72
70
79
73
78
82
77
81
86
71
81
85
83
88
90
88
92
92
84
92
93
86
90
87
91
1000 2000 4000 8000
56
69
68
74
69
74
78
73
77
81
68
77
80
79
83
85
83
85
86
80
85
87
81
85
82
85
48
65
62
72
64
71
76
69
75
78
63
74
77
76
80
81
79
81
82
77
81
82
78
81
79
81
43
62
55
68
60
68
73
65
71
76
60
70
74
71
76
79
76
78
79
74
78
79
76
79
76
79
38
58
49
65
55
64
69
61
68
72
55
66
71
66
72
74
71
73
75
70
73
75
72
75
72
75
The sound power level ratings shown are in decibels, calculated per AMCA Standard 301. Values shown are for inlet Lwi sound power levels for installation Type B: free
inlet, ducted outlet. Ratings do not include the effects of duct end correction.
27
SOUND POWER DATA
US16
US18
Sound Power Levels
Sound Power Levels
CFM
SP
RPM
Sones
1250
0.250
0.500
1.000
0.750
1.500
1.000
2.000
1.250
2.000
2.750
1.500
2.500
3.500
0.250
1.750
3.500
5.000
1.000
2.500
4.000
1.500
2.250
1.000
2.500
0.250
2.000
625
828
1040
1003
1266
1161
1464
1309
1514
1707
1450
1695
1924
1328
1704
2054
2330
1801
2095
2346
2086
2221
2088
2349
2062
2356
5.8
9.4
13.0
12.6
17.3
15.6
20.0
18.4
20.8
23.7
21.0
24.0
28.1
18.0
25.9
31.6
36.8
31.2
34.3
37.2
34.7
39.0
35.3
37.3
30.9
37.4
1550
1850
2150
2450
2750
3500
4400
5000
5300
5600
CFM
63
125
250
500
67
74
83
82
88
86
88
88
87
89
88
88
92
88
87
92
94
88
92
95
92
93
92
95
93
95
67
73
77
76
82
79
84
82
83
85
83
85
88
83
84
89
91
86
89
91
89
90
89
91
90
92
67
74
78
78
81
81
85
84
86
88
87
87
89
82
88
89
89
88
88
89
88
89
89
89
90
89
59
67
75
75
80
78
80
80
81
85
81
85
88
80
88
91
91
93
93
94
94
95
94
94
90
94
SP
RPM
Sones
0.250
2.250
0.750
2.500
4.000
1.000
3.000
5.000
0.250
1.750
3.500
1.500
3.000
5.000
0.750
2.750
1.500
3.000
4.500
0.750
2.500
4.000
0.250
1.500
3.000
487
1238
774
1315
1650
968
1474
1864
933
1282
1641
1378
1647
1978
1378
1705
1638
1854
2062
1671
1910
2101
1642
1824
2016
3.6
17.9
11.6
19.6
27.1
11.8
23.5
31.0
9.9
19.0
26.6
21.7
26.6
32.4
21.1
27.7
26.9
30.6
35.1
27.5
31.5
35.7
27.0
30.3
33.1
SP
RPM
Sones
0.250
1.000
0.500
1.250
2.250
0.750
1.750
3.500
0.250
1.000
2.250
5.000
0.750
1.750
3.500
0.500
1.500
2.750
5.000
0.250
1.250
2.500
4.000
0.250
1.250
2.250
663
1228
987
1584
1161
1539
1876
1396
1782
2131
1144
1634
2010
1653
2119
2458
1977
2300
2546
1983
2289
2524
2141
2525
2179
2509
5.6
16.0
12.6
21.9
15.0
21.3
22.8
19.0
22.0
26.9
14.6
23.4
25.2
26.2
28.7
32.3
27.7
33.3
34.5
24.4
33.0
36.0
27.1
33.0
27.8
33.2
1000 2000 4000 8000
55
62
68
67
71
71
74
73
75
77
75
78
80
72
79
82
85
81
84
85
84
86
84
85
82
85
51
60
65
65
69
68
73
71
74
76
73
76
78
70
77
80
83
79
82
83
81
84
82
83
80
83
44
53
59
58
65
63
68
66
69
72
69
72
75
66
73
77
80
85
79
80
78
81
79
80
77
80
41
48
54
53
60
58
65
61
65
68
64
68
71
62
68
72
75
70
73
75
73
75
73
75
72
75
US20
1400
1850
2750
3650
4550
5225
5900
6575
6800
63
125
250
500
68
90
88
91
96
81
94
98
79
88
95
88
94
97
92
94
96
96
100
96
96
99
96
98
97
64
88
79
89
95
78
93
96
76
85
94
86
93
97
91
93
95
94
98
95
96
97
95
96
95
55
80
70
82
87
74
85
90
71
83
87
86
88
91
83
89
87
91
93
88
91
93
87
90
92
52
77
67
78
84
70
81
87
67
78
84
80
84
88
79
84
84
86
88
84
87
89
84
86
88
2500
3500
4500
5500
6500
7500
8500
9750
51
69
63
71
77
68
74
81
64
74
77
76
78
82
72
79
77
81
82
77
82
84
77
80
83
44
66
60
68
73
65
70
75
63
72
73
75
75
77
69
77
72
79
77
73
78
80
72
75
81
37
65
55
66
71
62
68
73
58
69
71
72
74
74
67
75
71
77
76
71
76
78
71
72
79
34
61
49
63
68
55
65
70
52
64
68
67
70
71
64
72
67
74
73
68
72
75
67
70
76
US22
Sound Power Levels
CFM
1000 2000 4000 8000
SP
RPM
Sones
0.250
1.000
0.500
1.500
2.000
0.750
2.000
3.000
0.250
1.000
2.250
3.500
5.000
1.250
2.000
3.000
5.000
0.250
1.000
2.250
4.000
0.750
2.000
3.500
0.250
1.250
2.000
590
873
829
1101
1233
1048
1317
1523
1095
1257
1485
1696
1948
1459
1584
1734
2020
1464
1577
1771
2002
1712
1889
2081
1887
1996
2089
6.1
12.1
11.0
17.4
19.0
16.9
21.2
25.7
16.6
22.2
25.6
29.7
36.5
27.5
28.8
31.2
38.5
24.3
30.4
35.2
38.0
29.7
37.6
40.7
34.8
37.9
40.3
Sound Power Levels
63
125
250
500
73
81
80
84
88
84
86
89
85
85
85
90
94
85
85
88
95
89
87
88
92
91
93
91
94
95
96
68
80
79
84
83
84
84
92
84
81
89
93
97
88
91
92
97
90
91
92
96
94
95
96
96
97
98
64
75
74
83
85
83
87
89
82
89
91
91
92
93
93
91
92
89
94
92
92
91
92
92
92
92
93
59
70
69
77
78
76
80
84
76
80
84
89
93
85
86
91
94
83
87
94
94
89
94
95
92
93
94
CFM
1000 2000 4000 8000
57
66
65
71
73
71
75
79
71
76
78
82
86
79
81
83
87
78
82
84
86
82
85
88
85
86
88
53
64
63
69
70
69
72
75
68
74
75
77
80
77
78
79
81
73
78
81
81
77
81
83
80
81
82
48
59
57
66
67
65
70
72
65
70
73
75
77
73
75
76
78
71
75
78
78
75
78
81
77
78
79
44
55
54
62
65
61
66
70
61
67
69
72
75
70
71
73
76
69
72
74
76
72
75
77
75
76
77
2900
4100
5300
6500
7700
8900
10400
11900
63
125
250
500
72
88
77
92
87
94
87
93
88
90
85
95
88
94
88
92
85
89
92
88
89
91
90
93
90
92
70
87
84
91
85
90
88
87
88
90
86
89
89
93
89
92
88
91
93
89
91
92
90
93
90
92
63
78
73
84
78
83
86
82
85
87
76
86
87
89
89
89
90
90
89
86
89
90
87
89
87
89
60
72
70
79
73
78
82
77
81
86
71
81
85
83
88
90
88
92
92
84
92
93
86
90
87
91
1000 2000 4000 8000
56
69
68
74
69
74
78
73
77
81
68
77
80
79
83
85
83
85
86
80
85
87
81
85
82
85
48
65
62
72
64
71
76
69
75
78
63
74
77
76
80
81
79
81
82
77
81
82
78
81
79
81
43
62
55
68
60
68
73
65
71
76
60
70
74
71
76
79
76
78
79
74
78
79
76
79
76
79
38
58
49
65
55
64
69
61
68
72
55
66
71
66
72
74
71
73
75
70
73
75
72
75
72
75
28
SOUND POWER DATA
US24
US30
Sound Power Levels
CFM
2900
4025
5150
6650
8150
9650
10775
11525
13025
SP
RPM
Sones
0.250
1.250
2.250
0.500
2.500
5.000
1.000
2.750
5.000
1.500
3.000
5.000
0.500
2.250
5.000
1.250
2.250
4.000
1.000
2.000
3.000
0.750
1.750
2.500
0.250
1.250
2.000
408
740
975
571
1045
1450
770
1116
1468
966
1208
1498
935
1184
1542
1178
1297
1497
1251
1363
1469
1294
1403
1480
1387
1492
1564
7.1
14.5
21.2
12.0
23.1
30.7
15.5
24.8
31.1
22.8
26.8
31.9
19.8
28.2
33.2
26.7
31.8
36.1
27.4
36.7
38.0
27.9
35.5
40.4
29.3
31.8
33.8
Sound Power Levels
63
125
250
500
75
84
91
80
91
85
85
91
85
90
86
86
90
89
86
89
85
87
82
87
88
83
87
89
84
85
87
71
82
87
81
86
85
83
85
85
84
83
85
87
84
86
83
86
87
83
88
88
83
87
89
84
85
86
68
77
84
76
87
92
79
88
93
88
91
93
82
91
94
90
94
95
91
95
96
91
94
96
92
93
94
64
74
79
72
81
86
85
82
86
81
84
86
78
85
87
84
86
88
84
89
89
84
88
90
85
86
87
CFM
SP
RPM
Sones
0.250
1.250
0.500
1.500
2.500
0.250
0.750
1.750
2.750
4.500
0.250
1.000
2.000
3.000
5.000
0.250
0.750
1.750
2.750
4.500
0.500
1.500
2.500
3.500
0.250
1.000
1.750
432
646
612
770
914
704
779
908
1023
1217
849
940
1051
1150
1334
997
1046
1149
1241
1385
1166
1255
1342
1421
1266
1322
1383
7.5
15.5
15.4
20.0
25.2
17.1
23.0
26.5
31.2
32.6
22.1
32.8
33.1
30.3
34.9
31.1
31.2
30.3
33.5
36.8
30.9
33.9
35.7
37.6
34.1
35.2
36.7
SP
RPM
Sones
0.500
1.000
0.250
1.000
1.750
0.500
1.500
2.500
3.500
1.000
2.000
3.000
4.000
3.150
0.500
2.000
3.500
5.000
1.000
2.500
4.000
0.500
1.750
3.000
0.250
1.000
286
369
278
396
488
379
500
597
683
498
595
678
754
701
504
646
759
858
617
738
839
642
739
826
697
747
7.1
10.6
7.6
12.4
18.2
12.5
19.4
25.0
31.2
20.8
25.3
30.8
36.5
32.8
23.6
29.9
37.4
45.7
31.0
37.0
45.0
36.7
40.7
45.1
32.5
45.5
1000 2000 4000 8000
62
72
77
69
79
85
74
81
86
79
83
86
76
84
86
83
87
88
83
89
89
84
88
90
85
86
87
52
68
75
62
77
83
68
78
84
75
80
84
74
81
84
80
84
86
80
87
87
81
86
88
83
84
85
46
62
69
56
71
79
65
73
79
70
75
80
68
75
80
75
78
81
76
81
82
77
81
83
78
80
81
39
56
65
49
67
74
57
69
74
65
71
75
64
70
75
70
72
76
72
74
76
72
75
76
73
75
76
US36
6000
8500
11000
13500
16000
18500
20500
63
125
250
500
76
88
87
88
91
89
89
89
91
97
91
92
93
97
98
91
92
97
98
99
97
98
99
99
98
99
99
75
85
85
88
91
86
91
92
89
93
90
94
91
93
92
89
90
93
93
93
93
93
93
92
93
93
93
67
79
78
84
89
81
87
90
95
94
85
94
95
92
95
95
94
92
94
95
93
95
95
96
95
95
95
63
74
74
78
82
75
80
83
85
85
79
86
85
84
86
85
85
84
85
87
84
86
87
87
86
87
87
9000
11600
14200
16800
19400
22000
24600
27200
29150
59
69
70
75
79
71
78
80
82
81
76
84
83
80
83
82
82
80
82
84
80
82
84
85
82
83
84
53
66
66
72
76
68
74
77
79
79
73
81
80
78
80
79
79
78
79
81
78
79
80
82
79
80
81
48
61
60
67
72
63
69
73
75
77
69
76
76
76
79
75
75
76
77
80
76
78
79
80
78
79
80
43
57
56
63
68
59
65
69
72
73
65
72
73
72
75
72
72
72
74
76
73
74
75
77
74
75
76
US44
Sound Power Levels
CFM
1000 2000 4000 8000
SP
RPM
Sones
0.250
1.500
0.500
1.750
2.750
0.750
2.000
3.000
4.000
1.000
2.250
4.000
0.250
1.250
2.250
5.000
1.000
2.250
4.500
0.750
2.000
3.500
0.500
1.500
2.500
0.250
1.750
359
564
474
633
760
581
710
814
918
682
792
946
701
781
858
1067
843
930
1080
911
990
1081
983
1041
1098
1035
1117
8.9
20.0
15.1
22.8
29.6
21.1
25.6
31.9
37.2
27.0
30.7
37.5
26.5
32.7
34.6
43.9
34.2
38.5
44.2
37.0
42.9
44.3
40.7
43.5
43.2
43.3
46.6
Sound Power Levels
63
125
250
500
85
90
887
91
97
90
92
98
101
92
95
99
95
95
96
100
100
98
100
101
99
100
101
101
100
101
101
75
91
87
92
95
92
94
97
99
96
98
99
93
99
99
100
98
99
100
99
100
100
99
100
101
100
100
65
81
76
83
88
83
86
90
94
87
89
96
85
91
93
100
91
97
100
94
100
100
97
99
99
99
101
62
74
69
77
81
76
80
83
86
81
82
86
80
84
85
89
84
87
89
85
88
89
87
88
89
88
90
CFM
1000 2000 4000 8000
58
71
66
75
80
73
78
81
84
78
81
84
78
81
83
86
82
84
86
84
85
86
85
86
86
86
87
54
68
62
72
76
69
74
77
80
74
76
80
75
77
78
83
78
80
83
80
81
83
81
82
83
82
84
51
66
59
69
75
65
71
75
78
69
73
77
74
73
75
78
77
76
78
78
77
78
78
79
79
79
79
50
65
56
67
74
63
68
73
76
67
70
75
73
70
72
75
75
73
75
76
74
75
76
76
75
76
76
9000
12000
16000
20000
21000
24000
28000
32000
36000
63
125
250
500
72
79
72
83
87
81
88
92
95
87
92
95
98
96
89
94
98
102
93
98
102
96
99
102
96
101
68
74
69
76
87
76
88
92
96
90
92
96
98
97
91
95
98
101
95
97
100
98
99
100
97
101
68
73
69
74
80
75
81
85
88
82
85
87
91
88
83
87
91
97
88
90
96
90
92
95
88
93
62
71
64
74
79
74
80
84
88
81
85
88
90
89
83
87
91
93
88
91
93
90
92
93
88
93
1000 2000 4000 8000
60
65
62
66
72
68
74
79
83
75
80
83
86
84
78
83
87
89
84
87
90
87
89
91
84
90
55
62
57
65
70
66
71
76
80
73
77
80
83
81
77
80
83
86
81
84
87
84
86
87
80
88
51
58
52
60
65
61
66
71
75
68
72
74
77
75
71
75
78
81
76
79
82
79
81
82
75
83
48
54
47
56
61
56
62
67
70
63
67
70
73
71
66
70
73
77
71
74
77
74
75
77
71
77
29
ENGINEERING SPECIFICATIONS
Model
US = Utility Blower
Unit Size
10, 12, 13, 15, 16, 18, 20, 22, 24, 30, 36,
44
Motor Speed
1= Single Speed
2= 2S2W Single and Three Phase
3= 2S1W Three Phase
Horse Power
See selection software.
Enclosure
O= Open Drip Proof
T = Totally Enclosed
E= Explosion Proof
Voltage
Phase
1 = Single
3 = Three
Cycle
5= 50 Hz
6= 60 Hz
Efficiency
S= Standard
H= High Efficiency
Fan RPM
Application CFM
Application Static Pressure
Rotation
CW = Clockwise
CCW= Counter Clockwise
Discharge Position
BAD, BAU, BH, DB, TAD, TAU, TH, UB
Paint / Coating
Dependent on model.
Color
0 = None
00= Standard Gray
50= Chrome Green
55= Pale Green
56= Dove Gray
61= White
63= Oxford Beige
65= Dover White
66= Desert Tan
70= Black
73= Smoke Gray
77= Brick Red
79= Peppercorn
81= Pale Brown
83= Chocolate Brown
85= Timeless Bronze
94= Charcoal
X = Special
AMCA Spark Rating
0 = None
C= Standard
B = Optional
Outlet Damper
0 = None
A = BDD Gravity Backdraft
B = Opposed Blade
C = 110/115/120 OBD Motorized
D = 208/230 OBD Motorized
E = 440/460/480 OBD Motorized
F = Parallel Blade
G = 110/115/120 Parallel Motorized
H = 208/230 Parallel Motorized
J = 440/460/480 Parallel Motorized
X = Special
Access Door
0 = None
B = Bolted Access Door
Q = Quick Release Access Door
Vibration Isolation
0 = None
RH= Rubber Hanger
SH= Spring Hanger
RF = Rubber Floor
SF = Spring Floor
SC= Support Channels with Rubber Floor
FP = Flex Pad
Thermal Overload Protection
0 = None
P = Thermal Overload Protection
Disconnect Switch
0 = None
1 = NEMA 1
3R = NEMA 3R
4 = NEMA 4
7 = NEMA 7
Internal Wiring
0 = None
1 = NEMA 1
3R = NEMA 3R
Firestat Switch
0 = None
F = Firestat Switch
Fatrap / Unipak
0 = None
F = Fatrap
DP = Unipak
FD = Fatrap / Unipak
Guard
0 =None
I =Inlet
U=Outlet
B=Both
Flange
0 = None
A = Stiffener Angles
0 =None
I =Inlet
U=Outlet
B=Both
Weather Cover
Companion Flange
Stiffener Angles
0 = None
C = Weather Cover
Extended Lube Lines
0= None
L = Extended Lube Lines
0 =None
F=Inlet
U=Outlet
B=Both
Variable Inlet Vanes
0 =None
B=Variable Inlet Vanes
Drain
0 = None
D=Drain
30
ENGINEERING SPECIFICATIONS
US Units
Centrifugal exhaust or supply blowers shall be Model US,
general purpose, belt driven utility fans with non-overloading,
backwardly inclined aluminum wheels, as manufactured by
YORK® by Johnson Controls. Fans shall be single inlet, single
width, AMCA arrangement 10 with clockwise (or CCW) rotation.
Air discharge position shall be THD unless specified otherwise.
Fan housing shall be heavy gauge galvanized steel for maximum
corrosion protection. Housings shall be field rotatable to any of
eight 45° incremental air discharge positions. Fan scrolls shall
be equipped with a bolted, gasketed (quick release if specified)
access door for cleaning and inspection.
The test standard 300 “Reverberant Room Method for Sound
Testing of Fans.” All sizes must be tested, calculations to other
sizes are not acceptable, Air or Sound tests results are to be
made available upon request.
Fans shall be UL (UL Std. 705, UL Std. 762 optional) listed.
If specified (Fatrap option), fan shall additionally provide UL
762 Listing rated at 500ºF, motor pre-wired to a weather-proof
junction box, and drain connection leading into a grease collector/
separator box. If specified (heat and smoke removal option), fan
shall additionally provide UL power ventilator for smoke control
systems listing rated for 500°F at 4-hours and 1000°F at 41
minutes, including a steel wheel.
The bearing supports shall be constructed of welded structural
steel members to prevent vibration and rigidly support the shaft
and bearings, bearings shall be heavy duty, self-aligning, pillow
block ball bearings, grease lubricated and selected for minimum
life (L50) of 200,000 hours at maximum operating speed. Shafts
shall be turned, ground, and polished. Shafts shall be sized so
the first critical speed is at least 20% over the maximum operating
speed. Close tolerances shall be maintained along the length of
the shaft.
The standard fan wheel shall be aluminum (steel for smoke
removal), non-overloading backward inclined type. The wheels
shall be statically and dynamically balanced. The wheel and inlet
shall be aerodynamically designed and constructed to provide
maximum performance and efficiency.
Steel Wheel (Heat and Smoke Removal) - The wheel is a standard
duty, all-welded wheel. The blades are curved for improved air
performance, while increasing their strength and rigidity. The
wheel assembly is fully welded to provide extremely durable and
consistent performance. The wheel is dynamically balanced.
Balancing weights are mechanically attached to the inside of the
rims of both the backplate and wheel inlet. This allows a precise
placement of the weights anywhere within a full 360° range on
two separate planes, without the possibility of detachment
Pulleys shall be adjustable (through 20 HP) cast iron, machined,
keyed, and securely attached. Belts and pulleys shall be sized
for 150% of the installed motor horsepower. Motors shall be
heavy duty, ball bearing, open drip proof (totally enclosed or
other type if specified) motors. After assembly, the entire unit,
with drive train installed and set to specified RPM, shall have
a computerized vibration analysis performed. Vibration shall be
measured in the horizontal, vertical, and axial directions at each
bearing to assure quality and smooth operation.
Fans shall be licensed to bear the AMCA Air and Sound Certified
Ratings Seal. Fan air performance ratings shall be bear on test
conducted in an AMCA registered laboratory for AMCA 210 air
performance testing. The test standard used shall be ANSI/
AMCA Standard 210-85, ANSI/ASHRAE Standard 51-1985
“Laboratory Methods of Testing Fans for Rating.” All sizes must
be tested, calculations to other sizes not acceptable. Fan sound
performance shall be based on tests conducted in an AMCA
registered laboratory for AMCA 300 Sound Performance Testing.
31
At Johnson Controls, we truly understand HVAC systems. In fact, we produce some of the
most robust HVAC equipment, parts and controls on the market today. But we don’t just
sell products. We also offer the expertise, services and strategic insight to make them
work within your current system, optimizing your building’s performance and lowering your
overall costs. If you’re interested in revolutionizing your HVAC system, contact and expert
today. Otherwise, browse our full-suite of HVAC products.
Please visit us at johnsoncontrols.com/hvac for more information.
Printed on recycled paper.
Johnson Controls, the Johnson Controls logo, YORK® and Heresite® are trademarks of Johnson Controls, Inc.,
or its affiliates, in the United States of American and/or other countries.
©2015 Johnson Controls, Inc., P.O. Box 423, Milwaukee, WI 53201
www.johnsoncontrols.com
Printed in USA
PUBL-7606
US July 2015

General Purpose Centrifugal Fan, Model US

Transcription

Similar documents

vaneaxial fans

Upblast Roof Exhausters

CaptiveAire`s CASRE Utility Set

Central Fan Catalog