Complete Marine Products Section

Transcription

Complete Marine Products Section
High Quality Marine Pipe
6463 Marine Pipe comes Boxed and Poly-Sleeved
Suggested Applications: T-Tops, Tuna Towers, Half Towers, Marlin Towers,
Leaning Posts, Bow Rails, Poling Platforms, etc.
Western Extrusions: POLISHED Bright Dipped Anodized
SCH 40 Pipe x 23’ (6463-T66)
Stock Code
25-BDW-105A*
25-BDW-110A*
25-BDW-115
25-BDW-120
25-BDW-125
25-BDW-130
25-BDW-135
Size in Inches
3/4
1
1-1/4
1-1/2
2
2-1/2
3
Pcs/Box (Lin Ft/Box)
10 (230’)
6 (138’)
6 (138’)
5 (115’)
4 (92’)
2 (46’)
2 (46’)
Polished and
Bright Dipped
Western Extrusions: LITE BRUSHED Bright Dipped Anodized
SCH 40 Pipe x 23’ (320 grit) (6463-T66)
25-BRW-105B*
25-BRW-110B*
25-BRW-115
25-BRW-120
25-BRW-125
25-BRW-130
25-BRW-135
3/4
1
1-1/4
1-1/2
2
2-1/2
3
10 (230’)
6 (138’)
6 (138’)
5 (115’)
4 (92’)
2 (46’)
2 (46’)
Lite Brushed
and Bright Dipped
* Designed for 3/4” and 1” Sleeve Together
Pipe Aligners Available: Marine p15
Western Extrusions: POLISHED Bright Dipped Anodized
SCH 80 Pipe x 23’ (6463-T66)
26-BDW-115
26-BDW-120
25-BD-125C
26-BDW-130
1-1/4
1-1/2
2
2-1/2
6
5
4
2
(138’)
(115’)
(92’)
(46’)
Western Extrusions: LITE BRUSHED Bright Dipped Anodized
SCH 80 Pipe x 23’ (320 Grit) (6463-T66)
26-BRW-115
26-BRW-120
26-BRW-215
1-1/4
1-1/2
2
6 (138’)
5 (115’)
4 (92’)
BON-L: POLISHED Bright Dipped Anodized
SCH 40 Pipe x 23’ (6463-T67)
Stock Code
25-BD-100
25-BD-105A*
MILL ORDER 25-BD-110A
25-BD-115
25-BD-120
Size in Inches
1/2
3/4
1
1-1/4
1-1/2
Pcs/Box (Lin Ft/Box)
16 (368’)
12 (276’)
8 (184’)
6 (138’)
5 (115’)
BON-L: LITE BRUSHED Bright Dipped Anodized
SCH 40 Pipe x 23’ (320 Grit) (6463-T67)
25-BR-100
25-BR-105B*
25-BR-110B*
25-BR-115
25-BR-120
1/2
3/4
1
1-1/4
1-1/2
SCH 40 Aluminum Pipe End Caps
Mill Finish
APC-100-MF 1
APC-125-MF
1-1/4
APC-150-MF 1-1/2
APC-200-MF 2
Anodized
APC-750
3/4
APC-100
1
APC-125
1-1/4
APC-150
1-1/2
APC-200
2
SCH 40 Black Plastic End Caps
RN1-1/4DBK1 1”
16 (368’)
12 (276’)
8 (184’)
6 (138’)
5 (115’)
Scan QR Code to view
Marine Section online
Marine 01
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Additional Locations: West Palm Beach & Lakeland, FL; Newark, DE and Birmingham, AL
Eastern Metal Supply
website: www.EasternMetal.com
e-mail: info@EasternMetal.com
version: 12/02/15
6463 Marine Pipe - 6463 Marine Pipe comes Boxed and Poly-Sleeved
Polished/Non-Anodized SCH 10 Marine Pipe (6463)
Stock Code
52-63-5179
Size in Inches
1-1/2 x 20’
Pcs/Box (Lin Ft/Box)
6 (120’)
Mill Finish SCH 40 Marine Pipe (6463)
Stock Code
52-63-6926
52-63-6927
52-63-6928
52-63-6929
52-63-6930
52-63-6931
Size in Inches
3/4 x 23’
1 x 23’
1-1/4 x 23’
1-1/2 x 23’
2 x 23’
2-1/2 x 23’
Pcs/Box (Lin Ft/Box)
12 (276’)
10 (230’)
6 (138’)
6 (138’)
4 (92’)
2 (46’)
Mill Finish Pipe
Mill Finish SCH 80 Marine Pipe (6463)
Stock Code
52-63-6933
52-63-6932
Size in Inches
2 x 23'
2-1/2 x 23'
Pcs/Box (Lin Ft/Box)
2 (46’)
2 (46’)
Mill Finish Structural Pipe
Mill Finish SCH 10 Aluminum Pipe (6463-T67)
Size in Inches
2 x 23’
Stock Code
32-64-210
Mill Finish SCH 40 Aluminum Pipe (6063-T52)
Stock Code
18-63-220
18-63-221
18-63-225
18-63-226
18-63-230
18-63-233
18-63-232
18-63-235
18-63-236
18-63-240
18-63-241
18-63-245
18-63-250
Size in Inches
3/4 x 20’
3/4 x 23’
1 x 20’
1 x 23’
1-1/4 x 20’
1-1/4 x 23’
1-1/4 x 24’
1-1/2 x 20’
1-1/2 x 23’
2 x 20’
2 x 23’
2-1/2 x 20’
3 x 20’
Pipe Aligners Available: Marine p15
SCH 40 Aluminum Pipe End Caps
Mill Finish
APC-100-MF 1
APC-125-MF
1-1/4
APC-150-MF 1-1/2
APC-200-MF 2
Anodized
APC-750
3/4
APC-100
1
APC-125
1-1/4
APC-150
1-1/2
APC-200
2
Mill Finish SCH 40 Aluminum Pipe (6061-T6)
Stock Code
18-61-215
18-61-220
18-61-222
18-61-225
18-61-230
18-61-235
18-61-240
18-61-241
18-61-243
18-61-246
18-61-245
18-61-250
Size in Inches
1/2 x 20’
3/4 x 20’
3/4 x 24’
1 x 20’
1-1/4 x 20’
1-1/2 x 20’
2 x 20’
2 x 24’
2 x 30’
2-1/2 x 22’
2-1/2 x 20’
3 x 20’
SCH 40 Black Plastic End Caps
RN1-1/4DBK1 1”
Marine 02
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Additional Locations: West Palm Beach & Lakeland, FL; Newark, DE and Birmingham, AL
Eastern Metal Supply
website: www.EasternMetal.com
e-mail: info@EasternMetal.com
version: 10/16/15
Marine Extrusions
Bright Dipped Anodized Drawn Tube x 20’
Suggested Applications:
Bow Rails, Handrails, Canvas Top Frames, Bimini Tops, etc.
Stock Code
25-BD-460
25-BD-463
25-BD-465
25-BD-467
MILL ORDER 25-BD-468 (FL)
25-BD-469
Size in Inches Lgths./Box
3/4 x .058
54
7/8 x .058 (16’)
38
7/8 x .058
38
7/8 x .058 (24’)
38
7/8 x .095
38
7/8 x .095 (24')
38
Drawn Tube
Superbuff Stainless Steel Tube x 24’ 2”
304 Alloy typically used in Freshwater applications
Size in Inches
Lgths./Box
Stock Code
25-304-100
7/8 x 16 gauge (.062)
30
25-304-105
1 x 16 gauge (.062)
16
Stainless Steel
Tube
316 Alloy typically used in Saltwater applications
Size in Inches
Lgths./Box
Stock Code
25-316-100
7/8 x 16 gauge (.062)
30
25-316-105
1 x 16 gauge (.062)
16
Oval Tube x 20’ (6463-T67)
Available: Polished and Bright Dipped, Brushed and Bright Dipped and Mill Finish
Applications: Ladder Steps, T-Top Braces, Tower Supports, etc.
Size in Inches
Lgths./Box
1 x 1-1/2 (Mill Finish)
10
1 x 1-1/2 (BDA Polished)
10
1 x 1-1/2 (BDA Brushed)
10
1 x 1-7/8 (Mill Finish) x 22’
8
1 x 1-7/8 (BDA Brushed)
8
1 x 1-7/8 (BDA Polished)
8
1-1/4 x 2-3/8 (BDA Polished)
6
1-1/4 x 3 (BDA Polished)
6
1-1/4 x 3 (BDA Brushed)
6
1-1/4 x 3 (Mill Finish)
6
1-1/4 x 4 (1/8” wall - BDA Polished)
4
1-1/4 x 4 (1/8” wall - BDA Brushed)
4
1-1/4 x 4 (1/8” wall - Mill Finish)
4
1-1/4 x 4 (.140” wall - Mill FInish)
4
1-1/4 x 4 (.140” wall - BDA Brushed)
4
Stock Code
52-63-6354
25-BD-200
25-BR-200
25-MF-220
25-BR-205
25-BD-205
25-BD-208
25-BD-210
25-BR-210
25-MF-210
25-BD-215
25-BR-215
25-64-216
25-64-217
25-BRW-217
Polished and Bright Dipped
Marine 03
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Additional Locations: West Palm Beach & Lakeland, FL; Newark, DE and Birmingham, AL
Eastern Metal Supply
website: www.EasternMetal.com
e-mail: info@EasternMetal.com
version: 06/15/16
Polished BDA Architectural Angle x 20’ - Smooth Finish
Stock Code
25-BD-300
Size in Inches
2 x 2 x 1/4
Lgths./Box
6 (Used to fabricate Brushed Mounting Angle)
Polished BDA Structural Angle x 20’ - Smooth Finish
Stock Code
25-BD-303
Size in Inches
2 x 2 x 1/4
Lgths./Box
6
Architectural Angle
Polished BDA Architectural Tee x 20’ - Smooth Finish
Stock Code
25-BD-305
Size in Inches
2 x 2 x 1/4
Lgths./Box
6
Polished BDA Square Tube w/ Radius Corner x 20’
Stock Code
25-BD-310
25-BD-315
Size in Inches
1 x 1 x 1/8
2 x 2 x 1/8
Structural Angle
Lgths./Box
10
6
Polished BDA Rectangular Tube w/ Radius Corner x 20’
Stock Code
25-BD-320
25-BD-325
Size in Inches
1 x 2 x 1/8
1 x 3 x 1/8
Lgths./Box
8
6
Architectural Tee
6463-T6 Polished BDA Flat Bar x 12’ (Sharp Corner)
Stock Code
25-BD-415
25-BD-400
25-BD-405
25-BD-410
25-BD-417
25-BD-416
Size in Inches
1/8 x 4
1/4 x 2
1/4 x 3
1/4 x 4
3/8 x 4
3/8 x 5
Lgths./Box
16
16
10
8
4
4 (used for Outrigger Bases)
Square Tube w/Radius
Mini Plate - Brushed (320 Grit) and Bright Dipped Anodized
Stock Code
25-BRW-415
Size in Inches
1/4 x 12” x 48” (Used to make: Brackets, Mounting Plates, Braces & more)
Rectangular Tube w/Radius
6463-T6 Brushed (320 Grit) BDA Flat Bar x 12’ ( Sharp Corner)
Stock Code
25-BRW-400
25-BRW-405
25-BRW-410
Size in Inches
1/4 x 2
1/4 x 3
1/4 x 4
Lgths./Box
16
10
8
6463-T6 Polished BDA Flat Bar x 12’ ( Radius Corner)
Stock Code
25-BD-420
25-BD-425
25-BD-428
25-BD-430
Size in Inches
1/4 x 2
3/8 x 2
1/2 x 1-1/2
1/2 x 2
Flat Bar (Sharp Corner)
Lgths./Box
16
10
12
8
6463-T6 Flat Bar x 12’ Mill Finish ( Sharp Corner)
Stock Code
10-64-340
10-64-345
10-64-350
10-64-353
10-64-355
10-64-358
Size in Inches
1/4 x 2
1/4 x 2-1/2
1/4 x 3
1/4 x 3-1/2
1/4 x 4
1/4 x 4-1/2
Stock Code
10-64-360
10-64-365
10-64-440
10-64-443
10-64-445
Size in Inches
1/4 x 5
1/4 x 6
3/8 x 4
3/8 x 5
3/8 x 6
Flat Bar (Radius Corner)
Additional Sizes and Alloys of Sheet & Plate are
available in the Standards Section (pages 05-08)
Marine 04
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Additional Locations: West Palm Beach & Lakeland, FL; Newark, DE and Birmingham, AL
Eastern Metal Supply
website: www.EasternMetal.com
e-mail: info@EasternMetal.com
version: 08/15/16
Outrigger Oval Extrusion x 20’
Stock Code
25-BR-211
Size in Inches
1-1/4 x 5.516 (BDA Brushed)
Lgths./Box
4
Outrigger Oval Extrusion
Polished and Bright Dipped Oval Tube with Ribs x 20’ (6463-T66)
Applications: Ladder Steps, T-Top Braces, Tower Supports, etc.
Stock Code
Size in Inches
Lgths./Box
MILL ORDER
1 x 1-1/2 (3 Ribs) - Minimum Quantity Required
25-BD-245
1 x 1-1/2 (7 Ribs)
10
Polished and Bright Dipped Oval
(3 Ribs: left; 7 Ribs: right)
Polished and Bright Dipped Oval Tube x 20’ - Non Skid (6463-T67)
Applications: Ladder Steps, T-Top Braces, Swim Platforms, etc.
Non-Skid Finish on Both Flat Surfaces, All other surfaces are Polished
Stock Code
Size in Inches
Lgths./Box
25-NS-200
1 x 1-1/2 (Non Skid)
10
25-NS-205
1 x 1-7/8 (Non Skid)
8
25-NS-215
1.29 x 1.757 Tower Step x 20’
8
25-BD-226
3" Knurled Ladder Rung x 12'
25-MF-226
3" Knurled Ladder Rung x 12' (Mill Finish)
DVLDR
Black Dive Ladder End Caps
Polished and
Bright Dipped
Non-Skid
Tower Step
3” Knurled Ladder Rung
Polished and Bright Dipped Oval Tube x 20’
w/ Slot for Insert ( 6463-T67 )
Stock Code
Size in Inches
Lgths./Box
25-BD-250
1 x 1-1/2 (slot for small insert)
10
25-BD-255
1 x 1-7/8 (slot for large insert)
8
25-BD-212
1-1/4 x 3 (double slot for small insert) 6
Polished and Bright Dipped Oval Tube
(w/ Slot for Insert) left to right: 25-BD-250,
25-BD-255, 25-BD-212
Insert Material
Stock Code
VI-SM
VI-LG
Description
1-1/2 (mates with 25-BD-250 & 25-BD-212)
1-7/8 (mates with 25-BD-255)
Insert Material
Bright Dipped Anodized Awning Track x 16’
25-BD-470
Awning Track
Awning Track x 16’
Bright Dipped Anodized Slide Track Channel x 14’
25-BD-475
Slide Track Channel
Slide Track Channel
Gunwale/Gunnel - 6061-T6
Suggested Applications: Boat Gunwales/Gunnels, Airboat applications
52-61-672
2.2 x 2 x 1/8 x 32' Mill Finish 0.850
Gunwales/Gunnel
Marine Grade Sheet - 5052 H32 Mill Finish
Federal Specifications QQA 250
Size in Inches
Stock Code
Approx.
Wt/Sheet
Stock Code
Size in Inches
Approx.
Wt/Sheet
50-5052-4896 .190 x
50-52-48120
.190 x
50-03-183 (NC/TX) .190 x
50-03-185
.190 x
50-03-186
.190 x
85.12
106.40
106.40
127.68
133.00
50-03-187
50-03-300
50-03-188
50-03-190
50-03-191
.190
.250
.250
.250
.250
159.60
111.68
139.60
167.52
209.40
48
48
48
48
60
x
x
x
x
x
96
120
120
144
120
x
x
x
x
x
60
48
48
48
60
x
x
x
x
x
144
96
120
144
144
Marine 05
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Additional Locations: West Palm Beach & Lakeland, FL; Newark, DE and Birmingham, AL
Eastern Metal Supply
website: www.EasternMetal.com
e-mail: info@EasternMetal.com
version: 03/18/15
Straight Rod Holders
8-1/2” 15° with
1-7/8” Oval Bracket
W00802A-SL
Angle Cut Bracket
Silver
8-1/2” 15° with
1-1/2” Oval Bracket
WOOST85SL-CT
Angle Cut Bracket
Silver
with Welded Pin (Liners Sold Separately)
8-1/2” with 3/8”
T-Top Wedge for
1” Pipe
WOT8202-SL Silver
WOT8202-GL Gold
Swedged/Flared Rod Holders
8-1/2” with 3/8”
T-Top Wedge for
1” Pipe
WOT8201-SL
Silver
8-1/2” - No Blade
WOP802-SL
Silver
10” with 3/8” T-Top
Wedge for 1” Pipe
TWST10-SL
Silver
with Welded Pin (Liners Sold Separately)
10” with 3/8”
10” - No Blade
WOP801-SL Silver
T-Top Wedge for 1” THICK Blade
WOP801-GL Gold
WOL1001-SL
Pipe
WOP801-M Mill Finish WOPE1001ET-SL Silver
Silver
WOPE-SL Silver
WOPE-GL Gold
8-1/2” - No Blade
10” - No Blade
TWOPST10-SL
Silver
10” with 3/8”
WOPE1001ET-GL Gold
WOPE1001ET-MF
Mill Finish
10” OFFSHORE
SERIES 2.125” ID
No Blade; Silver
WOPE-MF
Mill Finish
WOPEB10-SL Polished
WOPE-SLB Brushed Silver WOPEBL10-SL Brushed
WOPEB10-MF Mill Finish
Spinning Rod Holder and Liners
8-1/2” Spinning
Rod Holders
No Welded Pin; No Bracket
Rod Holder Liner
LINER7
for 8-1/2" straight rod holders
SRH-3 Silver Anodized
SRH-3-MF Mill Finish
Rod Holder Liners
T88152-1
for 8-1/2" & 10" swedged/flared
rod holders
T88152-2
for 10" swedged/flared
Offshore Series
Rod Holder Liner
LINERSRH3
fitted liner for spinning rod
holders
Marine 06
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Additional Locations: West Palm Beach & Lakeland, FL; Newark, DE and Birmingham, AL
Eastern Metal Supply
website: www.EasternMetal.com
e-mail: info@EasternMetal.com
version: 08/15/16
Round Marine Pads - (Packaged in pairs)
D = Polished
B = Brushed
POLISHED PADS
3-Hole Round Pads - Bright Dipped POLISHED - Standard Edge
Stock Code
D-253
52-63-6781
D-303
D-303A
D-303-NCS
D-300-CH
D-353
D-353-NCS
D-403
D-403-250
D-403-375
D-400-CH
D-401 (NC)
D-453
D-453-NCS
D-503
D-500-CH
D-501 (NC)
Size in Inches
2.5
2.5
3
3
3
3
3.5
3.5
4
4
4
4
4
4.5
4.5
5
5
5
Fastener
#10
#10 (5/16 threaded center hole)
#10
1/4
1/4 (NO countersink on holes)
1/4 (1/4 center hole ONLY)
1/4
1/4 (NO countersink on holes)
1/4
1/4 (1-1/4 center hole)
1/4 (3/8 center hole - NOT threaded)
1/4 (1/4 center hole ONLY)
1/4 (1/4 center hole ONLY)
1/4
1/4 (NO countersink on holes)
1/4
1/4 (1/4 center hole ONLY)
1/4 (1/4 center hole ONLY)
4” 3-Hole Round Pad
Bright Dipped Polished (D)
D-400-CH & D-500-CH
Center Hole Only
3 Hole Round Pads - Bright Dipped POLISHED - “EP” STYLE
Stock Code
EP-253
EP-303
EP-353
EP-403
EP-453
Size in Inches
2.5
3
3.5
4
4.5
Fastener
3/16
1/4
1/4
1/4
1/4
4-Hole Round Pads - Bright Dipped POLISHED - Standard Edge
Stock Code
D-304
D-354
D-404
D-404-NCS
D-404-250
D-404OS
D-454
D-504
D-504-250
Size in Inches
3
3.5
4
4
4
4
4.5
5
5
Fastener
#10
1/4
1/4
1/4 (NO countersink on holes)
1/4 (1-1/4 center hole)
1/4 (offset)
1/4
1/4
1/4 (1-1/4 center hole)
4-Hole Round
Pad - Bright
Dipped
Polished (D)
1-1/4” center
hole
4 Hole Round Pads
- Offset Bright
Dipped Polished (D)
4 Hole Round Pads - Bright Dipped POLISHED - “EP” STYLE
Stock Code
EP-354
EP-404
EP-404-150
EP-404OS
EP-454
EP-454-150
EP-504
Size in Inches
3.5
4
4
4
4.5
4.5
5
Fastener
1/4
1/4
1/4 (1-1/2” center hole)
1/4 (offset)
1/4
1/4 (1-1/2” center hole)
1/4
4 Hole Round Pads (EP
Style) Bright Dipped Polished
Custom size pads built to your specs (minimum quantity required)
Marine 07
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Additional Locations: West Palm Beach & Lakeland, FL; Newark, DE and Birmingham, AL
Eastern Metal Supply
website: www.EasternMetal.com
e-mail: info@EasternMetal.com
version: 01/16/16
Round Marine Pads - (Packaged in pairs)
D = Polished
B = Brushed
HIGH POLISHED PADS
3-Hole Round Pads - HIGH POLISHED - “EP” STYLE
Stock Code
PEP-253
PEP-303
PEP-353
PEP-403
PEP-503
Size in Inches
2.5
3
3.5
4
5
Fastener
#10
1/4
1/4
1/4
1/4
4-Hole Round Pads - HIGH POLISHED - “EP” STYLE
Stock Code
PEP-404
PEP-404OS
PEP-454
EP-455
PEP-504
Size in Inches
4
4
4.5
4.5
5
Fastener
#10
1/4 Offset
1/4
5/16 (5 holes)
1/4
BRUSHED PADS
3-Hole Round Pads - Bright Dipped BRUSHED - Standard Edge
Stock Code
B-303A
B-353
B-400-TCH
B-403
B-453
B-503
Size in Inches
3
3.5
4
4
4.5
5
Fastener
1/4
1/4
3/8 (Threaded Center Hole)
1/4
1/4
1/4
4-Hole Round Pads - Bright Dipped BRUSHED - Standard Edge
Stock Code
B-404
B-404OS
B-454
B-504
Size in Inches
4
4
4.5
5
Fastener
1/4
1/4 (offset)
1/4
1/4
4” 4-Hole Round
Pad Bright Dipped
Brushed (B)
4 Hole Round Pads - Bright Dipped BRUSHED - “EP” STYLE
Stock Code
EPB-404OS
Size in Inches
4
Fastener
1/4 (offset)
Custom size pads built to your specs (minimum quantity required)
Marine 08
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Additional Locations: West Palm Beach & Lakeland, FL; Newark, DE and Birmingham, AL
Eastern Metal Supply
website: www.EasternMetal.com
e-mail: info@EasternMetal.com
version: 02/16/15
Round Marine Pads - (Packaged in pairs)
MILL FINISH PADS
3-Hole Round Pads - MILL FINISH - Standard Edge
Stock Code
Size in Inches Fastener
52-63-6781-MF 2.5
#10 (5/16 Threaded Center Hole; Mill Finish)
(mates with D-403-375 for folding/pivoting backrest supports)
3
#10 (Mill Finish)
D-303-MF*
3
1/4 (Mill Finish)
D-303A-MF*
D-353-MF*
3.5
1/4 (Mill Finish)
1/4 (Mill Finish - no counter sink)
D-353-NCS-MF 3.5
D-403-MF
4
1/4 (Mill Finish)
D-403-NCS-MF 4
1/4 (Mill Finish - no counter sink)
D-403150-NCS-MF 4
1/4 (Mill Finish - no counter sink; 1-1/2” center hole)
D-453-MF
4.5
1/4 (Mill Finish)
D-453-NCS-MF 4.5
1/4 (Mill Finish - no counter sink)
D-503-MF
5
1/4 (Mill Finish)
D Standard Edge Style
4-Hole Round Pads - MILL FINISH - Standard Edge
Stock Code
D-304-MF
D-354-MF
D-404-MF
D-454-MF
D-504-MF
D-504-250
Size in Inches
3
3.5
4
4.5
5
5
Fastener
#10 (Mill Finish)
1/4 (Mill Finish)
1/4 (Mill Finish)
1/4 (Mill Finish)
1/4 (Mill Finish)
1/4 (1-1/4 center hole)
EP Edge Style
3 Hole Round Disc - MILL FINISH - “EP” STYLE
Stock Code
EP-303-MF
EP-353-MF
EP-403-MF
Size in Inches
3
3.5
4
Fastener
1/4 (Mill FInish)
1/4 (Mill FInish)
1/4 (Mill FInish)
4 Hole Round Disc - MILL FINISH - “EP” STYLE
Stock Code
EP-404-MF
Size in Inches
4
Fastener
1/4 (Mill FInish)
Custom size pads built to your specs (minimum quantity required)
Marine 09
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Additional Locations: West Palm Beach & Lakeland, FL; Newark, DE and Birmingham, AL
Eastern Metal Supply
website: www.EasternMetal.com
e-mail: info@EasternMetal.com
version: 07/20/16
Rectangular Marine Pads - (Packaged in pairs)
POLSHED PADS
2-Hole Rectangular (Oblong/Shape) Pads - Bright Dipped POLISHED
Stock Code
RP-1535-2
RP-2040-2
Size in Inches
1-1/2 x 3-1/2
2x4
Fastener
1/4
1/4
4-Hole Rectangular (Oblong/Shape) Pads - Bright Dipped POLISHED
RP-1535-4
RP-2040-4
RP-2540-4
RP-3040-4
RP-3040-4-MF
RP-3040-41250
RP-3045-4
RP-3550-4
RP-4060-4
RP-4060-41OB
RP-4060-4OB
1-1/2 x 3-1/2
2x4
2-1/2 x 4
3x4
3x4
3x4
3 x 4-1/2
3-1/2 x 5
4 x 6 x 3/8
4 x 6 x 1/4
4 x 6 x 3/8
#10
1/4
1/4
1/4
1/4 (Mill Finish)
1/4 (1-1/4 center hole)
1/4
1/4
1/4
1/4
5/16
4-Hole Rectangular (Radius Corner) Pads - Bright Dipped POLISHED
RP-2040-4RC
RP-3040-4RC
2x4
3x4
RP-3040-4RC-MF 3 x 4
1/4
1/4
1/4 (Mill Finish)
2 Hole Rect. Pads
Oblong/Shape
4 Hole Rect.
Oblong/Shape Pads
Polished
HIGH POLISHED PADS
Rectangular (Oblong/Shape) Pads - HIGH POLISHED - “EP” STYLE
Stock Code
PEP-3040-4RC
PEP-3040-4OB
PEP-3045-4OB
PEP-3045-4OB5
RC-4060-4OB
RP-4060-425
RP-4060-431
RP-4060-4375
RC-4565-4OB
RC-4565-4OBN
RC-4565-4OB3
RC-4565-4OB2
RP-5070-4OB
RP-5070-6OB
Size in Inches
3 x 4 x .250
3 x 4 x .250
3 x 4.375 x .250
3 x 4.375 x .250
4 x 6 x .375
4 x 6 x .250
4 x 6 x .250
4 x 6 x .375
4.5 x 6.5 x .250
4.5 x 6.5 x .250
4.5 x 6.5 x .375
4.5 x 6.5 x .375
5 x 7 x .375
5 x 7 x .375
Fastener
4 Holes (1/4”): Radius Corner; NOT Oblong
4 Holes (1/4”): Oblong
4 Holes (1/4”): Oblong
4 Holes (1/4”): Oblong; 1-1/2” Center Hole
4 Holes (5/16”): Countersunk; 2” Center Hole (6463-T66)
4 Holes (1/4”): Oblong; 2-1/2” Center Hole
4 Holes (.312) Oblong: 2-1/2” Center Hole
4 Holes (1/4”): Oblong; 2-1/2” Center Hole
4 Holes (5/16”): NO Countersink; (2-3/8” Center Hole (6463-T66)
4 Holes (5/16”): NO Countersink (6463-T66)
4 Holes (1/4”): NO Countersink; 3” Center Hole (6463-T66)
4 Holes (1/4”): Countersunk; 2-3/8” Center Hole (6463-T66)
4 Holes (1/4”): Oblong
4 Holes (1/4”): Oblong with 6 Outside Holes
BRUSHED PADS
2-Hole Rectangular (Radius Corner) Pads - Bright Dipped BRUSHED
RB-2040-2
2x4
4 Hole Rect.
Oblong/Shape Pads
Polished (1-1/4 center hole)
4 Hole Rect.
Radius Corner Pads
1/4
4-Hole Rectangular (Oblong/Shape) Pads - Bright Dipped BRUSHED
RB-2540-4
RB-3040-4OB
RB-3045-4-MF
RB-3045-4
RB-3550-4
RB-4060-4
RB-4060-41OB
RB-4060-4OB
2-1/2 x 4
3x4
3 x 4-1/2
3 x 4-1/2
3-1/2 x 5
4 x 6 x 3/8
4 x 6 x 1/4
4 x 6 x 3/8
1/4
1/4
1/4 (Brushed/No Anodize)
1/4
1/4
1/4
1/4
5/16
4 Hole Rect.
Radius Corner Pads Brushed
4-Hole Rectangular (Radius Corner) Pads - Bright Dipped BRUSHED
RB-2040-4
RB-2540-4R
RB-3040-4
2x4
2-1/2 x 4
3x4
1/4
1/4
1/4
EMS FL
1-800-432-2204
(561) 588-4780 - fax
Custom size pads built to your specifications
(minimum quantity required)
Marine 10
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Additional Locations: West Palm Beach & Lakeland, FL; Newark, DE and Birmingham, AL
Eastern Metal Supply
website: www.EasternMetal.com
e-mail: info@EasternMetal.com
version: 06/09/16
Miscellaneous Marine Pads - (Packaged in pairs)
D = Polished
B = Brushed
2-Hole Oval Pads
Stock Code
OP-2035-2
OP-2035-2P
OP-2035-2P-MF
OP-2540-2B
OP-2540-2P
Size in Inches
2 x 3.5 (brushed)
2 x 3.5 (polished)
2 x 3.5 (mill finish)
2.5 x 4 (brushed)
2.5 x 4 (polished)
Fastener
1/4
1/4
1/4
1/4
1/4
Oval Pads
Tear Drop Pads - Bright Dipped - Polished
Stock Code
TD-3040
Size in Inches
Fastener
2 x 3 (with countersunk hole)
Tear Drop Pads
Triangular Heart Pads
Stock Code
TP-353
HP-3040-3
HB-3040-3
Size in Inches
3-1/2
3 x 4 (Polished)
3 x 4 (Brushed)
Fastener
1/4
1/4
1/4
Triangular Heart
Pads
Heart Pad
Diamond Pads
Stock Code
DP-2035-3
DB-2035-3
DB-2045-3
Size in Inches
2 x 3-1/2 (Polished)
2 x 3-1/2 (Brushed)
2 x 4-1/4 (Brushed)
Fastener
1/4
1/4
1/4
Size in Inches
2 x 1/4
Fastener
3/16
Diamond Pads
Square Pad
Stock Code
SB-222
Square Pad
Outrigger Hard Top Pad
Stock Code
LHOP-8.75 (NC)
Description
Outrigger Hard Top Pad
Outrigger
Hard Top Pad
Pad for Windshield Guard
Stock Code
EPWP-150 (NC)
Windshield
Pad
Description
1-1/2" Round Pad (for 3/4” Pipe; 3/8" threaded center hole)
Custom size pads built to your specs (minimum quantity required)
Marine 11
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Additional Locations: West Palm Beach & Lakeland, FL; Newark, DE and Birmingham, AL
Eastern Metal Supply
website: www.EasternMetal.com
e-mail: info@EasternMetal.com
version: 07/30/15
Special Marine Pads
Round Pads - Bright Dipped POLISHED - Standard Edge
Stock Code
Size (Inches)
D-300-CH
11386-12
D-400-CH
D-500-CH
3
3
4
5
x
x
x
x
.250
.375
.250
.250
* Special Order
Description
Contains center hole only; countersunk
Fastener
¼
Contains center hole only (threaded 3/8-16); countersunk ¼
Contains center hole only; countersunk
¼
Contains center hole only; countersunk
¼
Round Pads - Bright Dipped BRUSHED - Standard Edge
Stock Code
Size (Inches)
EB-250-CH
EB-300-CH
B-400-TCH
57678-14A
57678-13A
57678-11A *
2.5 x .250
3 x .250
4 x .375
4.5 x .375
6 x .250
6 x .375
Description
Contains NON-Threaded Center Hole Only (3/16”): NO Countersink (6463-T66)
Contains NON-Threaded Center Hole Only (3/16”): NO Countersink (6463-T66)
Contains NON-Threaded Center Hole Only (5/16”): NO Countersink (6463-T66)
3 Holes (5/16”): Countersunk (6061-T6)
3 Holes (5/16”): NO Countersink; NO Center Hole (6061-T6)
3 Holes (5/16”): Countersunk; 2” Center hole (6061-T6)
57678-11A
Round Pads - MILL FINISH - Standard Edge
Stock Code
Size (Inches)
57678-15M
57678-12M
4.5 x .250
6 x .250
Description
3 Holes (5/16”): NO Countersink (6463-T66)
3 Holes (5/16”): NO Countersink; 2” Center Hole (6061-T6) - Backing Plate
57678-7A
Rectangular (Oblong/Shape) Pads - Bright Dipped BRUSHED
Stock Code
Size (Inches)
57678-4A
57678-5A
57678-6A *
57678-7A
57678-2AA
57678-8A
4 x 6 x .375
4 x 6 x .375
4 x 6 x .375
4 x 6 x .375
4 x 12 x .375
4.5 x 6 x .375
Description
4 Holes (5/16”): NO Countersink (6463-T66)
4 Holes (5/16”): Countersunk (6463-T66)
4 Holes (5/16”): NO Countersink; 2” Center Hole (6463-T66)
4 Holes (5/16”): Countersunk; 2” Center Hole (6463-T66)
6 Holes (5/16”): NO Countersink (6463-T66)
4 Holes (5/16”): Countersunk (6061-T6)
57678-2AA
Rectangular (Oblong/Shape) Pads - 6463-T66 - MILL FINISH
Stock Code
Size (Inches)
57678-9M
57678-4M *
57678-1M
57678-10
4 x 6 x .250
4 x 6 x .375
4 x 12 x .375
4.5 x 6 x .250
57678-8A
Description
4 Holes (5/16”) and 2” Center Hole: NO Countersink
4 Holes (5/16”): NO Countersink
6 Holes (5/16”): NO Countersink and 2 - 2” Center Holes
4 Holes (5/16”): NO Countersink; 2 - 2” Center Holes
Poling Platform Mounting Pad - Bright Dipped - POLISHED
Stock Code
Size (Inches)
Description
PPMP
3 x 10 x .25
5 Holes
57678-4M
57678-1M
Polling Platform
Mounting Pad
4” Round Hard Top Mounting Pad - Bright Dipped - POLISHED
Stock Code
Size (Inches)
4RHTMP
4 x .375
Description
(3/8” thread) Sold in set of 2 pads; Hardware NOT included.
Hard Top Mounting Pad - Bright Dipped - POLISHED
Stock Code
Size (Inches)
Description
HTMP
4 x 12.875 x .375
8 Holes
4” Round Hard Top
Mounting Pad
(2 pads)
Hard Top
Mounting Pad
Leaning Post Pad - Bright Dipped - POLISHED
Stock Code
Size (Inches)
Description
LPP-21625
2 x 16
6 Holes
Leaning
Post Pad
Marine 12
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Additional Locations: West Palm Beach & Lakeland, FL; Newark, DE and Birmingham, AL
Eastern Metal Supply
website: www.EasternMetal.com
e-mail: info@EasternMetal.com
version: 11/18/15
Marine Hardware and Accessories
Hard Top Bushings and Washers - Powder Coated Marine White
Custom size Bushings
Stock Code
HTP-1
HTW-1
HTW-2 (NC)
& Washers available/minimum quantities apply
Description
1-5/8 x 1-1/2 x 1 Hard Top Bushing
1-1/8 x 1/4 Hard Top Washer
2-1/2 x 3/8 Hard Top Washer
Hard Top Bushings
and Washers
Rod Butt
Stock Code
RODG1
Description
Rod Butt for 1” pipe Polished
Stand Off
SO-1250
1-1/4" Stand Off Polished BDA
Rod Butt
Stand Off
Cup Holders
Stock Code
PCHE-BP
Description
Black Plastic Cup Insert (w/ Stainless Ring on top)
Mates with PCHE
Stainless Steel Cup Insert
Mates with PCHE
PCHE-SS
Cup Holder Mounting Ring (Polished and Anodized)
(Accepts PCHE-BP and PCHE-SS)
PCHE
Black Plastic Cup Insert; Stainless Cup Insert
Bottom: PCHE Mounting Ring
Folding/Pivoting Back Rest
Stock Code
FBRA-KIT
FBRA-KIT-BLK
Description
PBRP-404
4" 4 Hole Round Pad; WHITE
PBRP-404-BK
(w/ 3/8” counter sunk center hole white plastic)
4" 4 Hole Round Pad; BLACK
(w/ 3/8” counter sunk center hole black plastic)
50045
3/8" x 1" notched thread screw
BRP-250
2-1/2" Round Pad
Folding/Pivoting Back Rest Assembly
Folding/Pivoting Back Rest Assembly (Black)
left-right: Folding/Pivoting Back Rest Assembly;
FBRA-KIT; FBRA-KIT-BLK
(w/ 3/8” threaded center hole polished & anodized)
left to right: PBRP-404; 50045; BRP-250
FBRA-SLEEVE
Folding Back Rest Sleeve for 1”
FBRA-SLEEVE
(shown with 1” pipe inserted)
Custom size pads built to your specifications
(minimum quantity required)
Marine 13
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Additional Locations: West Palm Beach & Lakeland, FL; Newark, DE and Birmingham, AL
Eastern Metal Supply
website: www.EasternMetal.com
e-mail: info@EasternMetal.com
version: 07/29/16
Marine Hardware and Accessories
Breakaway Pins
Stock Code
BAP-750
BAP-1000
BAP-1250
BAP-1500
BAP-2000
Size In Inches
3/4
1
1-1/4
1-1/2
2
Breakaway Pins
Pivoting Breakaway Pin
Stock Code
PIVPIN-750
Size In Inches
Pivoting breakaway pin for ¾” pipe
Threaded Antenna Boss
Stock Code
TAB-1
Size In Inches
3.5 (1”-14 Thread / .500 Through Hole Size)
Pivoting Breakaway Pin
Threaded Antenna Mount
Stock Code
TAM-1
Size In Inches
4” (¾” I.D. and 1” of threads)
End Caps
Stock Code
APC-750
APC-100
APC-125
APC-150
APC-200
Threaded
Antenna Mount
Threaded
Antenna Boss
Size In Inches
3/4
1
1-1/4
1-1/2
2
End Caps
Plug Boss
52-63-44068
3/4” Plug Boss for ¾ sch 40 pipe
1/4 -20 threaded center hole; for attachment of grab rails
Hand Rail Boss - Bright Dip Anodized
Stock Code
HRB-1
Size In Inches
1 x 1-7/8
3/4” Plug Boss; Inserted into pipe
Brushed Mounting Angles (2 x 2 x 1/4)
Stock Code
Size In Inches
MA-151
2 (1 hole)
MA-402
4 (2 hole)
6 (3 hole)
MA-603
MA-804
8 (4 hole)
25-BD-300
2 x 2 x 1/4 Arch Angle
Used to fabricate Brushed Mounting Angle
Fastener
1/4
1/4
1/4
1/4
x 20’
6 pcs/box
Hand Rail Boss
Polished Mounting Angles (2 x 2 x 1/4)
Stock Code
PMA-151
PMA-402
PMA-603
PMA-804
PMA-255
Size In Inches
2 (1 hole)
4 (2 hole)
6 (3 hole)
8 (4 hole)
1-3/8” x 2” x 5-1/2” (4 hole)
Fastener
1/4
1/4
1/4
1/4
1/4
Mounting Angles
PMA-255
Mounting Angle
Marine 14
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Additional Locations: West Palm Beach & Lakeland, FL; Newark, DE and Birmingham, AL
Eastern Metal Supply
website: www.EasternMetal.com
e-mail: info@EasternMetal.com
version: 07/29/16
Marine Hardware and Accessories
Sleeves - Outside BDA Polished
Stock Code
SLV-1-6
SLV-1.250-6
SLV-1.25-8.5
SLV-1.50-6
SLV-1.50-8.5
SLV-1.50-10 (TX)
SLV-2-6
SLV-2-8
SLV-2-10
SLV-2-12
Description
1x6
1-1/4 x 6
1-1/4 x 8-1/2
1-1/2 x 6
1-1/2 x 8-1/2
1-1/2 x 10
2x6
2x8
2 x 10
2 x 12
Sleeves - Outside
Sleeves - Outside Mill Finish
Stock Code
SLV-1.50-6MF
SLV-1.50-10MF
SLV-2-8MF
SLV-2-10MF
SLV-2-12MF
Description
1-1/2 x 6
1-1/2 x 10
2x8
2 x 10
2 x 12
Pipe Aligners
Stock Code
PA-0752
PA-1002
PA-1253
PA-1505
PA-2005
Description
3/4
1
1-1/4
1-1/2
2
Pipe Aligners
Antenna Ratchet Mounting Pads
Stock Code
AP-320
AP-4
Description
3 x 2 x 1/4
4 x 4x 1/4
Antenna Ratchet Mounting Pads
Bow Rail Components
Stock Code
BREC
BRSS
GREC
GRMS
Description
Fastener
Bow Rail End Cap for ¾” Pipe; 2.25” High
1/4
Bow Rail Mid Span Support for ¾” Pipe; 2.25” High
1/4
Grip Rail End Cap for ¾” pipe; 2.625” High
1/4
Grip Rail Mid Span Support for ¾” pipe; 2.625” High
1/4
Left: Bow Rail
End Cap
Right: Bow Rail
Mid Span Support
Marine 15
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Additional Locations: West Palm Beach & Lakeland, FL; Newark, DE and Birmingham, AL
Eastern Metal Supply
website: www.EasternMetal.com
e-mail: info@EasternMetal.com
version: 12/03/15
Marine Hardware & Accessories
Folding Foot Rest Hardware
Stock Code
FR-ANGLE
Description
Flat Surface Mount (Sold in Sets, Left and Right)
Each side includes: 1) 2 x 2 x 3 Hinge Block; 1) 5/16 Bolt; 2) Delrin Washers; 1) 1" Female Pin
BOFR
Bolt On Foot Rest Hardware
FR-Angle
BOFR
Sold in sets (1 Right & 1 Left) Includes (2) 1” Male Pins (1) 5/16” Bolt
FRP-WELD-ON
Weld On Blade Mount (polished blade) (drops past horizontal)
includes:1) 2 x 3 Hinge Block; 1) 5/16 Bolt; 2) Delrin Washers; 1) 1" Female Pin
FR-WELD-ON
Weld On Blade Mount (brushed blade) (drops past horizontal)
includes:1) 2 x 3 Hinge Block; 1) 5/16 Bolt; 2) Delrin Washers; 1) 1" Female Pin
FR-WELD-ON-90
Weld On Blade Mount (brushed blade) (drops to horizontal)
includes:1) 2 x 2-1/2 Hinge Block; 1) 5/16 Bolt; 2) Delrin Washers; 1) 1" Female Pin
left: FR-Weld-On; right: FR-Weld-On-90
Ear Mounts
Stock Code
EM-750
EM-100
EM-200
Description
3/4” Ear Mount with 1/4” Hole
1” Ear Mount with 5/16” Hole
1-1/4 or 1-1/2” Ear Mount with 3/8” Hole
Ear Mounts
Folding Bench Seat Hardware
Stock Code
FBSH-T
Description
Folding Bench Seat Hardware
includes:1) 1/4 x 2 x 2 T-Stock Hinge; 1) 1/4" Socket Cap Screw;
2) Delrin Washers; 1) 3/4" Female Pin; 1) Retaining Clip;
1) Retaining Clip Mount & Screw
FBSH-Angle
FBSH-T
Mounting Angle
Sold in pairs with 1” female pin, right & left
for surface mounting Seat to Transom, etc.
FBSH-Angle
Hinge Bracket
Stock Code
HB-250
HB-375
HB-500
HB3L
Blade Thickness In Inches
1/4
3/8
1/2
3 Leg Bracket: 1/4” Oustide Legs & 3/8” Inside Leg
Hinge Bracket
Alignment Pins
Stock Code
ALP-100
ALP-125
ALP-150
ALP-200
Size In Inches
1" Alignment Pin
1-1/4" Alignment Pins
1-1/2" Alignment Pin
2" Alignment Pin
Slot Size
1/2" Through Hole Size
3/4" Through Hole Size
3/4" Through Hole Size
1" Through Hole Size
3 Leg Bracket
Alignment Pins
Marine 16
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Additional Locations: West Palm Beach & Lakeland, FL; Newark, DE and Birmingham, AL
Eastern Metal Supply
website: www.EasternMetal.com
e-mail: info@EasternMetal.com
version: 08/15/16
Marine Hardware & Accessories
Female Pins
Stock Code
FP-75375
FP-100375
FP-100500
FP-125500
FP-125500WS
FP-150500
FP-150500WS
FP-200750
Size In Inches
3/4
1
1
1-1/4
1-1/4
1-1/2
1-1/2
2
Slot Size
3/8
3/8
1/2
1/2
5/8
1/2
.630
3/4
Fastener
1/4* (Wide Slot)
5/16
5/16* (Wide Slot)
3/8
3/8* (Wide Slot)
3/8
3/8* (Wide Slot)
1/2* (Wide Slot)
Female Pins
Female Oval Pin
FOP-100500
1
1/2
5/16
Mates with 1 x 1-1/2” Oval Tube (52-63-6354, 25-BD-200, 25-BR-200)
Bolts included with all Female Pins
*These Pins are supplied with Washers
Female Oval Pin
Female & Male Pin shown connected;
Not sold together; sold individually
Male Pins
Stock Code
MP-750
MP-1000
MP-1250
MP-1500
MP-2000
Size In Inches
3/4
1
1-1/4
1-1/2
2
Fastener
1/4
5/16
3/8
3/8
1/2
Male Pins
Quick Release Pin
1” Quick Release Pin; for 2 locking positions 0o and 90o
QRP-1
Quick Releae Pin
Half Pins
Stock Code
HP-750
HP-1000
HP-1250
HP-1500
Size In Inches
3/4
1
1-1/4
1-1/2
Fastener
3/8
3/8
3/8
3/8
Half Pins
Tower Boss
Stock Code
TB-750
TB-1312-10
TB-1312-15
TB-1625-20
TB-1875-20
Size In Inches
3/4 x 1
1-5/16 x 1
1-5/16 x 1-1/2
1-5/8 x 2
1-7/8 x 2
Fastener
1/4”-20 (one
3/8”-16 (one
3/8”-16 (one
3/8”-16 (one
3/8”-16 (one
end)
end)
end)
end)
end)
Tower Boss
Threaded Knob
Stock Code
Description
BK-KNOB (NC/TX)
Black Threaded Knob 3/8”-16 (one end)
For Tower Boss, Femal Pin Connections
Threaded Knob
Marine 17
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Additional Locations: West Palm Beach & Lakeland, FL; Newark, DE and Birmingham, AL
Eastern Metal Supply
website: www.EasternMetal.com
e-mail: info@EasternMetal.com
version: 08/01/13
Marine Hardware & Accessories - Outriggers
Lee’s Outrigger Bases
Outrigger Bases available as Drop-In's or Weld-In's; feature Quick Release Lay Down
Quick Release Lay Downs incorporate delrin bushings and nylon bearing surfaces to provide smooth operation
and prevent metal on metal contact. Raise and lower via pushing down on a ridged collar - 3 positions to lock
in. Rotation locks in two positions, straight back running and 80 degrees out for trolling.
Stock Code
SW9100
Description
Lee’s Sidewinder Lay-Down/Weld-In (Silver)
(Sold as Set) Outrigger Base
Lee’s Sidewinder Lay-Down/Drop-In (Silver)
(Sold as Set) Outrigger Base
SW9300
Lee’s Sidewinder
Outrigger Base
Tigress Track Telescoping Outrigger Poles
T88904
T88905
T88908
T88909
T88976
Tigress Track
Tigress Track
Tigress Track
Tigress Track
Tigress Track
15’ Anodized Aluminum (Black/Gold)
15’ Anodized Aluminum (Silver/Black)
18’ Anodized Aluminum (Black/Gold)
18’ Anodized Aluminum (Silver/Black)
18’ Carbon Fiber (Black/Black)
Ask about Tigress Rigging Kits!
Outrigger Mounting Plates* - BDA Polished 6463-T6
OMP-7
OMP-11.75 (NC)
25-BD-416
3/8 x 5” x 7” (3-1/8” diameter hole)
3/8 x 5” x 11-3/4” (3-1/8” diameter hole)
3/8 x 5” x 12’
4 lengths/box
Used to fabricate Outrigger Bases
Outrigger Hard Top Pad
LHOP-8.75 (NC)
Outrigger Mounting
Plates
Outrigger Hard Top Pad
Outrigger
Hard Top Pad
Outrigger Oval Tube* - BDA Brushed 6463-T6
OOMP-20
OOMP-30
25-BR-211
Brushed Oval Outrigger Mount Plate x 20”
Brushed Oval Outrigger Mount Plate x 30”
1-1/4 x 5.516 Brushed Oval Tube x 20’
Used to fabricate Oval Tube Mounting Plates
Oval Tube
Oval Tube Mounting Plate
Marine Hardware & Accessories Ski & Wakeboard Tower Components
Complete line of components for building ski and wakeboard
towers. Components are made from Bright Dip Anodized
6061-T6 aluminum and are compatible with 1-1/2" SCH 40 pipe.
Locking Break-Away Pin
ST-LBAP
Aft Attachment Pad
ST-AAP
Forward Attachment Pad Male/Female Swing Pin
ST-MFSP
ST-FAP
Ski Ball Assembly w/
Nylon Insert
ST-SBA Fits 2” Pipe
ST-SBA-MF Mill Finish
Fits 1-1/4" Pipe
ST-SBA-BDA
Fits 1-1/4"
Pipe
BDA
Marine 18
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Additional Locations: West Palm Beach & Lakeland, FL; Newark, DE and Birmingham, AL
Eastern Metal Supply
website: www.EasternMetal.com
e-mail: info@EasternMetal.com
version: 06/13/16
Marine Hardware & Acc.: Boxes, Hardtops & Fiberglass Products
Fiberglass Electronics Box
EMSSEB
Small, Black Face
24” W x 15” D x 10” H
Fiberglass Electronics Box
EMSLEB
Large, Black Face
30” W x 17” D x 11” H
½” Door & Frame, 1 Gas Shock, Stainless Lock
½” Door & Frame, 1 Gas Shock, Stainless Lock
Fiberglass Electronics Box
EB32W (NC)
Large, Black Face
32" W x 20" D x 10" H
Crowned top - White Exterior
Stainless Steel Latch and Friction Hinges.
Gasket on door for a water resistant box.
Also Available as Special Orders (NC):
Size: 24” W and 28” W
All sizes can be made with White or Off White Exteriors
Upper Tower Control Box
TWRBOX 28” W x 11-1/2” H x 20” D
GemLux Latch & Friction Hinges/Cored
Upper Control Station
UCS
White Fiberglass
25-1/2” W x 15-1/2” D x 13” H
Radius Back Fiberglass Electronics Box
24EBOX-R
SPECIAL ORDER
24” W x 15” D x 12” H
White Fiberglass
GemLux Latch and Friction Hinges, cored
Fiberglass Poling Platform Cap
PPFC
Fiberglass Cap (White)
24" W x 42" L x 1-1/2" W Lip
White Fiberglass Hard Top
WFHT
66” x 88” x 1-3/8”
SPECIAL ORDER
•
•
•
•
White gelcoat yacht finish
Non-skid topside
Honeycomb core
Front/rear molded in spreader
pods
• Internal wire-ways
Leaning Post Tray
7000TRAY
White Fiberglass
33” W x 9” D x 6-3/4” H
4RHTMP
Hard Top Mounting Pads
Bright Dipped - POLISHED
4RHTMP
4 x .375 (3/8” thread)
Sold in set of 2 pads; Hardware NOT included.
4 x 12.875 x .375 8 Holes
HTMP
HTMP
Marine 19
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Additional Locations: West Palm Beach & Lakeland, FL; Newark, DE and Birmingham, AL
Eastern Metal Supply
website: www.EasternMetal.com
e-mail: info@EasternMetal.com
version: 06/09/16
Marine Hardware & Accessories - Lights
360 Adjustable* & Fixed Anchor
Navigation Lights by Hella
Hella Marine LED Anchor Lights
Halogen Docking Lights by Beacon
360° NaviLED Anchor Lamp
Great for T-Tops, Towers, Poling Platforms
62255BLACK
8” Fold Down (Black)
62255WHITE
8” Fold Down (White)
8” Fixed Mount (Black)
62254BLACK
62253BLACK
4” Fixed Mount (Black)
*Can be mounted vertically or Horizontally
959910-727
959910-627
9-95-CMW - closeout!
9-96-CMW - closeout!
9-96-CMB - closeout!
360° NaviLED Light
959731
959631
Spreader/Flood Light
TT402
TT406
Lumitec LED Rail Lights
White/Bracket Mount
Fluorescent Light Kits
FL
Fluorescent Light
LED T-Top/Utility Light
Mini Rail2
101078 6" White Output
FLH
101079 6" Blue Output
Large White
Small White
Small Black
24” Long; White Base
24” Long; Black Base
Spreader/Flood Light
White/Flush Mount
12” Fold Down White
12” Fold Down Black
Fluorescent Light
Housing
Lumitec LED
Spreader/Flood Light
Lumitec LED Dual Color
Spread/ Flood Light
101040 White/Bracket Mount
Soft Start & Dimmable
Dimmable, White/Bracket Mount
Round T-Top LED Lights
LED-WR
White & Red lights with
silver aluminum case x 20”
Lumitec LED Underwater
Lights
101058 2 Color Output
(White & Blue)
LED T-Top/Utility Light Rail2
101102 LED White/Blue
101103 LED White/Red
101057 Light Green Output
101081 12" Dimmable
White+Blue Output
101243 12” - 3 Color
White, Red, Blue
Each color can come on
independent of others;
Only white is dimmable
Marine 20
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Additional Locations: West Palm Beach & Lakeland, FL; Newark, DE and Birmingham, AL
Eastern Metal Supply
website: www.EasternMetal.com
e-mail: info@EasternMetal.com
version: 08/10/16

Similar documents

Tigress Catalog - Eastern Metal Supply

Tigress Catalog - Eastern Metal Supply & Alignment Pins Female & Male Pins, Half Pins & Tower Boss Fiberglass Boxes & Hard Tops Round Polished Pads Round High Polished Pads & Round Brushed Pads Round Mill Finish Pads Rectangular Polishe...

More information

Complete Hurricane Section

Complete Hurricane Section BERTHA®, DACROSHIELD® are all trademarks of Eastern Metal Supply, Inc. ASSA® is a trademark of the American Shutter Systems Association. All rights reserved.

More information