Martin the Bunny Rabbit
Transcription
Martin the Bunny Rabbit
Page |0 Amigurumi Crochet Pattern Martin the Bunny Rabbit Designed By: Ida Herter Martin the Bunny Rabbit: Copyright 2013 © Ida Herter Martin the Bunny Rabbit: Copyright 2013 © Ida Herter Page |1 Martin the Bunny Rabbit Materials: Lily Sugar ‘n’ Cream Solids (worsted) weight cotton yarn (2.50 oz. /120 yds. /70 g per ball): 1 ball robin’s egg # 01215 (A) 1 ball white # 00001 (B) Small amount hot orange # 01628 (C) Small amount sage green # 00084 (D) Size F/5/3.75mm crochet hook Yarn needle Stitch marker 9 mm black shank eyes: 2 Pink embroidery floss Black embroidery floss Fiberfill Difficulty: Easy Gauge: With F hook, rnds 1 through 5 of head = 2”. Notes: Finished Measurements: 7.5” from tips of ears to toes. The toy is worked in continuous rounds; do not join rounds unless it is noted otherwise. Special Stitches: sc2tog = Single crochet decrease. Place the hook through the first sc, yarn over and draw up a loop. Place the hook through the second sc, yarn over and draw up another loop. Yarn over again, and draw through all three loops on the hook. Place a stitch marker at the beginning of the round, and move the marker up as each round is completed. Color change in sc: Place hook through the last stitch, draw up yarn, drop the old color, yarn over with new color, and draw through the two loops on hook. Stitch Abbreviations: ch = chain sc = single crochet Make color changes by switching to the new color in the last yarn over of the last stitch in the preceding round. Do not fasten off colors until piece is finished. (See special stitches.) Tip! Replace a traditional single crochet decrease with an invisible decrease to give your toy a cleaner look. To make an invisible decrease, insert the hook in the front loops of the next two sc. Yarn over and draw up a loop through the two loops. Yarn over again and draw through the two loops on hook. sc2tog = single crochet two together (single crochet decrease) sl st = slip stitch Martin the Bunny Rabbit: Copyright 2013 © Ida Herter Page |2 Instructions: HEAD: With Robin’s egg (A), ch 2. Rnd 1: Work 6 sc in 2nd ch from hook. (6sc) Rnd 2: 2 sc in each sc around. (12 sc) Rnd 3: *Sc in next sc, 2 sc in next sc; rep from * around. (18 sc) Rnd 4: *Sc in next 2 sc, 2 sc in next sc; rep from * around. (24 sc) Rnd 5: *Sc in next 3 sc, 2 sc in next sc; rep from * around. (30 sc) Rnd 6: *Sc in next 4 sc, 2 sc in next sc; rep from * around. (36 sc) Rnd 7-12: Sc in each sc around. (36 sc) Rnd 13: *Sc in next 4 sc, sc2tog over next 2 sc; rep from * around. (30 sc) Rnd 14: *Sc in next 3 sc, sc2tog over next 2 sc; rep from * around. (24 sc) Note: Make face at this point. (See assembly section.) Rnd 4: *Sc in next 2 sc, 2 sc in next sc; rep from * around, change to A in last st of round. (24 sc) Rnd 15: *Sc in next 2 sc, sc2tog over next 2 sc; rep from * around. (18 sc) Rnd 5: *Sc in next 3 sc, 2 sc in next sc; rep from * around. (30 sc) Note: Fill head firmly with fiberfill at this point. Rnd 6: *Sc in next 4 sc, 2 sc in next sc; rep from * around, change to B in last st of round. (36 sc) Rnd 16: *Sc in nect sc, sc2tog over next 2 sc; rep from * around, join round with a sl st to first sc of round. (12 sc) Note: Fasten off leaving a long tail of yarn that will later be used for assembly. Rnd 7-8: Sc in each sc around, change to A in last st of last round. (36 sc) Rnd 9-10: Sc in each sc around, change to B in last st of last round. (36 sc) Rnd 11: *Sc in next 4 sc, sc2tog over next 2 sc; rep from * around. (30 sc) BODY: With robin’s egg (A), ch 2. Rnd 1-2: Repeat rnds 1 through 2 of head, change to B in last st of last round. (12 sc) Rnd 3: *Sc in next sc, 2 sc in next sc; rep from * around. (18 sc) Rnd 12: Sc in each sc around, change to A in last st of round. (30 sc) Rnd 13: *Sc in next 3 sc, sc2tog over next 2 sc; rep from * around. (24 sc) Rnd 14: Sc in each sc around, change to B in last st of round. (24 sc) Rnd 15: Sc in each sc around. (24 sc) Martin the Bunny Rabbit: Copyright 2013 © Ida Herter Page |3 Rnd 16: *Sc in next 2 sc, sc2tog over next 2 sc; rep from * around, change to A in last st of round. (18 sc) Rnd 17: Sc in each sc around. (18 sc) Note: Fill body firmly with fiberfill at this point. Rnd 18: *Sc in next sc, sc2tog over next 2 sc; rep from * around, join round with a sl st to first sc of round. (12 sc) Note: Fasten off all colors. FEET: (Make two.) With robin’s egg (A), ch 2. Rnd 1: Work 6 sc in 2nd ch from hook. (6 sc) Rnd 2: *Sc in next sc, 2 sc in next sc; rep from * around. (9 sc) Rnd 3: *Sc in next 2 sc, 2 sc in next sc; rep from * around. (12 sc) Rnd 4-6: Sc in each sc around, join last round with a sl st to first sc of round. (12 sc) Note: Fasten off leaving a long tail of yarn that will later be used for assembly. Fill feet lightly with fiberfill. Note: Fasten off leaving a long tail of yarn that will later be used for assembly. Flatten ears with fingers and do not fill. TAIL: With white (B), ch 2. Rnd 1-2: Repeat rnds 1 through 2 of head. Rnd 3-4: Sc in each sc around. (12 sc) EARS: Note: Fill tail with fiberfill at this point. (Make two.) Rnd 5: *Sc2tog over next 2 sc; rep from * around, join round with a sl st to first sc of round. (6 sc) With robin’s egg (A), ch 2. Rnd 1: Repeat round 1 of feet. Rnd 2: [2 sc in next sc, sc in next 2 sc] 2 times. (8 sc) Rnd 3: Sc in each sc around. (8 sc) Rnd 4: [2 sc in next sc, sc in next 3 sc] 2 times. (10 sc) Rnd 5-11: Sc in each sc around, join last round with a sl st to first sc of round. (10 sc) Note: Fasten off leaving a long tail of yarn that will later be used for assembly. ARMS: (Make two.) With robin’s egg (A), ch 2. Rnd 1: Work 5 sc in 2nd ch from hook. (5 sc) Rnd 2: 2 sc in each sc around. (10 sc) Martin the Bunny Rabbit: Copyright 2013 © Ida Herter Page |4 Rnd 3-4: Sc in each sc around. (10 sc) Rnd 5: [Sc2tog over next 2 sc, sc in next 3 sc] 2 times. (8 sc) Rnd 6-11: Sc in each sc around. (8 sc) Note: Fill arm with fiberfill. Gradually decrease the amount of fiberfill as arm is filled. Rnd 12: [Sc2tog over next 2 sc, sc in next 2 sc] 2 times, join round with a sl st to first sc of round. (6 sc) Note: Fasten off leaving a long tail of yarn that will later be used for assembly. CARROT: With hot orange (C), ch 2. Rnd 1: Work 4 sc in 2nd ch from hook. (4 sc) Rnd 2: [2 sc in next sc, sc in next sc] 2 times. (6 sc) Rnd 3-4: Sc in each sc around. (6 sc) CARROT TOP: Rnd 5: [2 sc in next sc, sc in next 2 sc] 2 times. (8 sc) With sage green (D), ch 2. Rnd 6: Sc in each sc around. (8 sc) Rnd 7: [2 sc in next sc, sc in next 3 sc] 2 times. (10 sc) Rnd 8: Sc in each sc around. (10 sc) Rnd 1: Working in 2nd ch from hook, ([sc, ch 6, sc] 3 times), join round with a sl st to first sc of round. (6 sc, 3 “leaves”) Note: Fasten off leaving a long tail of yarn that will later be used for assembly. Note: Fill with fiberfill at this point. Rnd 9: *Sc2tog over next 2 sc; rep from * around, join round with a sl st to first sc of round. (5 sc) Note: Fasten off leaving a long tail of yarn that will later be used for assembly. Martin the Bunny Rabbit: Copyright 2013 © Ida Herter Page |5 Assembly: Next embroider the mouth. Make one long straight stitch to one side of the mouth. FACE: Place the 9mm safety eyes in the desired location on the head. Pull the stitch down gently to make a curve. After the eyes are in place, secure them with the washers. With pink embroidery floss, embroider the nose. First embroider a triangle with back stitches. Next, Place an over cast stitch over the center of the curve to secure it in place. With black embroidery floss, embroider whiskers on the sides of the face. Then, fill in the triangle using straight stitches. Continue crocheting the head. Martin the Bunny Rabbit: Copyright 2013 © Ida Herter Page |6 ATTACHING THE LIMBS: Sew the head to the body. Sew the tail to the back bottom center of the body. Flatten the top of the feet and whip stitch them to the bottom of the body. Fold the ears in half and sew the fold in place. The feet should be attached to round 4. Sew the ears to the top of the head. Flatten the top of the arms and sew the top portion of the arms to the body. Use the photo as a reference. Using the long tail of yarn from the carrot top, sew the carrot top to the top of the carrot. Then, using the long tail of yarn from the carrot, sew the carrot to the hands of the bunny. Fasten off and weave in all ends. Martin the Bunny Rabbit: Copyright 2013 © Ida Herter Page |7 Copyright Information This pattern and all photographs are copyright 2013 © Ida Herter. You do not have the right to reproduce or distribute this pattern, any part of this pattern, or its photographs in any form. This includes “exchanging” or “trading” this pattern with other individuals. You are not allowed to modify the pattern and sell it or distribute it in any form. You do not have the right to sell this pattern or any of its parts. You do have the right to sell what you make from this pattern. If you sell what you make, please give credit to me, Ida Herter, as the designer. If you choose to sell your finished product online, please post a link to my online shop. If you have any questions regarding copyright laws and how they apply to this pattern, please feel free to contact me. Martin the Bunny Rabbit: Copyright 2013 © Ida Herter