Proudly Distributed by

Transcription

Proudly Distributed by
Table of Contents
Santee Handle Bars�� 4 - 7
Santee Exhaust �� 8 - 16
Santee Frames�� 17 - 19
2
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
These fine Santee products are found in
the 2013 Custom Chrome Catalog
w w w.cu sto m c h ro m e.co m
3
Santee 1 1/4” Chrome Handlebars
These bars are the latest offering from Santee, these bars feature a ‘swedged’ which means you get a smooth transition from the 1.25” diameter
to the 1” area for mounting the OEM or any custom hand controls with 1” mounts. This taper also allows you to rotate the control to any angle
for both clearance and optimum comfort. Constructed of steel tubing and CNC bent for smooth lines, each set of bars comes pre-drilled and with
a ‘pull-wire’ already installed in the bars so pulling your wire harness through the bars will be much faster and easier. Available in a variety of
sizes, fitments, and finishes.
693680
693675
693684
693674
693681
1 1/4” Dresser Ape Hangers
These handlebars have all the features listed above but were
designed to fit FLHT/C/U/X models from 82-12 including Throttle-ByWire applications. For internal wiring only.
Chrome Handlebars
693678 11” Ape Hangers (width 37”, height 11”, center 15.75”, pullback 8.5”) ��$112.99
693682 17” Ape Hangers (width 37”, height 17”, center 15.75”, pullback 8”)��$125.99
Black Powder Coated Handlebars
4
Standard 1 1/4” Ape Hangers
Standard Ape Hangers are designed to fit all Big Twin and Sportster
models from 82-12 (except FLHT models) these handlebars will also
work with Throttle-By-Wire applications.
Chrome Handlebars
693670 11” Ape Hangers (width 33.75”, height 11”, center 10”, pullback 11”)��$114.99
Black Powder Coated Handlebars
697160
697164
697163
697167
697171
697043
697172
696734
Santee Designer Series ‘Bonanza’ Handlebars by
Fred Kodlin
These are the latest new and improved design Bonanza Bars II from
Fred Kodlin of Murdercycles. They are available in a ‘Flat’, 'Low',
‘Medium’, ‘High’, and in a Touring version and are available in either
a chrome-plated or black finish. Drilled for internal wiring, designed
for use with 96-12 style handlebar controls.
Bonanza Bars for FLH/FLHT Touring Models
38” wide, 15” rise, 14.5” center, 8.5”pullback, 1.25" dia.
697043 Chrome (will work with 'Throttle-by-Wire')�� $229.99
697042 Black (will work with 'Throttle-by-Wire')�� $229.99
1.25" Bonanza ‘Fat Bars’
697170 'Medium' Bonanza Fat Bars, Chrome (32" wide, 14" rise, 7"
center, 6" pullback, 1.25" dia.)�� $199.99
697171 'Medium' Bonanza Fat Bars, Black (32" wide, 14" rise, 7" center, 6" pullback, 1.25" dia.)�� $189.99
697172 'Low' Bonanza Fat Bars, Chrome (32" wide, 11" rise, 7" center,
6" pullback, 1.25" dia.) �� $189.99
697173 'Low' Bonanza Fat Bars, Black (32" wide, 11" rise, 7" center, 6"
pullback, 1.25" dia.) �� $179.99
Bonanza Bars II - Wide Version
697160 'High' wide Bonanza II, Chrome (36" wide, 15" rise, 12" center,
5 1/2" pullback, 1" dia.)�� $129.99
697162 'High' wide Bonanza II, Black (36" wide, 15" rise, 12" center, 5
1/2" pullback, 1" dia.)�� $129.99
697161 'Medium' wide Bonanza II, Chrome (36" wide, 13" rise, 12"
center, 5 1/2" pullback, 1" dia.) �� $119.99
697163 'Medium' wide Bonanza II, Black (36" wide, 13" rise, 12" center, 5 1/2" pullback, 1" dia.) �� $119.99
Bonanza Bars II - Narrow Version
697164 'High' narrow Bonanza II, Chrome (34" wide, 15" rise, 9" center, 5 1/2" pullback, 1" dia.) �� $129.99
697166 'High' narrow Bonanza II, Black (34" wide, 15" rise, 9" center,
5 1/2" pullback, 1" dia.)�� $129.99
697165 'Medium' narrow Bonanza II, Chrome (34" wide, 13" rise, 9"
center, 5 1/2" pullback, 1" dia.) �� $119.99
697167 'Medium' narrow Bonanza II, Black (34" wide, 13" rise, 9" center, 5 1/2" pullback, 1" dia.) �� $119.99
‘Flat’ Bonanza Bars
29” wide, 1” built-in riser, 5” pullback, 1" dia.
696734 Black�� $124.99
5
10”
10”
12”
12”
16”
16”
Santee 1” Ape Hanger Handlebars
1” steel handlebars, works with either early or late model style controls (except throttle-by-wire models). Available in 10”, 12”, and 16”
heights and in either a chrome-plated or Satin black powder coated
finish. Not knurled.
Pre-82 models
10” rise, 32.5” width, 7” pullback, 8” center
110000 10” Ape Hanger, Chrome ��$34.99
602222 10” Ape Hanger, Satin Black��$31.99
16” rise, 35” width, 7” pullback, 8” center
1982-up models (with wiring recess)
Santee 1” Ape Hanger Handlebars Pre-Drilled for
Internal Wiring
1” steel handlebars are knurled and pre-drilled for internal wiring for
a custom look and works with either early or late models style controls (except throttle-by-wire models). Available in 10”, 12”, and 16”
heights and in either a chrome-plated or satin black powder coated
finish.
6
Available in black
110023
693688
55484
693689
55401
1 1/4” T-Bars
110019
Santee 1” Wide and Low Handlebars
1” steel handlebars, works with either early or late model style
controls (except throttle-by-wire models). Available in different
widths to optimize comfort and in either a chrome-plated or black
powder coated finish.
Pre-82 models
110019 24” wide Drag bar, Chrome ��$23.99
602213 24” wide Drag bar, Black��$19.99
55483
32” wide Drag bar, Chrome ��$25.99
55484
55400
39” wide Drag bars, Chrome ��$34.99
110023* XLX style, Chrome (5” rise, 32” wide, 7” pullback, 6” center)
These bars are designed to fit most models from 82-12 including
Throttle-By-Wire applications with 3.50” center to center riser
mounting holes. For internal wiring only.
Chrome T-Bars
693686 6” T-Bar (width 30”, height 6”, pullback 11”) �� $129.99
693690 10” T-Bar (width 30”, height 10”, pullback 11”)�� $144.99
Black Powder Coated T-Bars
693691 10” T-Bar (width 30”, height 10”, pullback 11”)�� $134.99
693653
��$28.99
602219* XLX style, Black (5” rise, 32” wide, 7” pullback, 6” center)$26.99
82-12 models (except 08-12 Touring)
110029 26” wide Drag bar, Chrome ��$24.99
55485
55486
55401
39"-wide with slight rise and 2" pullback, Chrome ��$36.99
110033* XLX style, Chrome (5” rise, 32” wide, 7” pullback, 6” center)
693650
��$33.99
602218* XLX style, Black (5” rise, 32” wide, 7” pullback, 6” center)
�� $29.99
‘Straight-Up’ 1 1/4” T-Bars
These are the perfect bars to give your ride that aggressive, no
non-sense look. They feature straight risers, pre-drilled for internal
wiring (with a pre-installed pull wire) and will fit all models from
82-12 including ‘Throttle by Wire’ applications. Available in a
chrome-plated or gloss black finish.77cm
Chrome
693650 8” ‘Straight-Up’ T-Bars, Chrome�� $144.99
Black
693651
693653
693655
8” ‘Straight-Up’ T-Bars, Black �� $144.99
10” ‘Straight-Up’ T-Bars, Black�� $149.99
12” ‘Straight-Up’ T-Bars, Black�� $159.99
7
Santee
Santee “Designer Series” Double Barrel High Exhaust by Cycle Kraft
Designed by Kenji Nagai of Cycle Kraft Japan. These are the hottest pipes on the market, available in chrome or black finish with optional heat
shields. Include billet steel end caps and baffles.
650374 Double Barrel High, chrome fits Softails 86-11�� $479.99
650375 Double Barrel High, black fits Softails 86-11�� $499.99
651058 Double Barrel High, chrome fits Softails 12-13�� $479.99
651059 Double Barrel High, black fits Softails 12-13�� $499.99
650376 Double Barrel High, heat shields, chrome�� $115.99
650377 Double Barrel High, heat shields, black�� $119.99
Santee “Designer Series” Double Barrel Low Exhaust by Cycle Kraft
Designed by Kenji Nagai of Cycle Kraft Japan. This is the second version of his double barrel pipes, available in chrome or black finish with
optional heat shields. Include billet steel end caps and baffles.
650378 Double Barrel Low, chrome fits Softails 86-11 �� $479.99
650379 Double Barrel Low, black fits Softails 86-11 �� $499.99
651056 Double Barrel Low, chrome fits Softails 12-13 �� $479.99
651057 Double Barrel Low, black fits Softails 12-13 �� $499.99
650380 Double Barrel Low heat shields, chrome�� $115.99
650381 Double Barrel Low, heat shields, black�� $119.99
8
Fastbacks Pipes for Softails by Custom Chrome
Custom Chrome’s latest creation in exhaust designs. Choose between black or chrome finish, heat
shields are available in either finish (sold separately) so you can mix and match to your taste.
650370 Fastbacks, chrome Softails 86-11�� $479.99
650371 Fastbacks, black Softails 86-11 �� $499.99
651060 Fastbacks, chrome Softails 12-13�� $479.99
651061 Fastbacks, black Softails 12-13 �� $499.99
650372 Fastbacks, chrome heat shields �� $115.99
650373 Fastbacks, black heat shields�� $119.99
Santee
Santee ‘Holeshot’ Pipes for Sportsters
Midmount pipes designed to set your bike apart from
the crowd. Available with black or chrome drilled
heat shields and delivered with baffles and mounting
hardware.
650817 Holeshot pipes 04-13 XL chrome��$515.99
650818 Holeshot pipes 04-13 XL black ��$515.99
9
Chrome Billet End Cap
Pipe
Full-Radius
Heat Shield
07177
Santee 2 1/2" ‘Snub Nose’ Exhaust Pipes
Subtle as a nuclear blast — these pipes rock! Featuring fat 2 1/2"
maximum coverage heat shields for a huge look that keeps your
pipes looking new and virtually eliminates blueing. Each pipe is
constructed of heavy-duty 16-gauge steel and include heavy-duty
mounting brackets and chrome billet end caps with integral baffles
complete the package. Like all Santee pipes these beauties are
engineered to survive.
07177
650382
650315
650316
650391
650392
650368
650369
650086
651040
For Softail models 86-11, chrome �� $479.99
For Softail models 86-11 Black�� $479.99
For Softail models 12-13 chrome�� $469.99
For Softail models 12-13 black�� $479.99
For Dyna models 06-11 chrome�� $479.99
For Dyna models 06-11 black �� $276.99
For Dyna models 12-13 chrome�� $479.99
For Dyna models 12-13 black �� $479.99
For Sportster models from 04-13�� $444.99
For Sportster models from 04-13 black �� $444.99
650160
650162
Crossover
Santee Drag Pipes for Touring Models
Santee “Designer Series” ‘BOA’
Created with 2 1/4" pipe then beautifully polished and chromed, the
BOA is a lethal combination of performance and style. For Softail
models 86-13.
650160 For Softail models 86-11 ��$310.99
650162 Optional chrome heat shield set with hardware��$129.99
10
Distinct dual exhaust systems featuring 2 1/4" straight pipes to deliver
wicked sound and all the power you can handle. The ‘Crossover’
system has one pipe exiting on each side.
07721
Crossover exhaust system 85-06��$389.99
650384 Crossover exhaust Chrome 10-13��$367.99
650385 Crossover exhaust Black 10-13 ��$397.99
650023 Optional baffle for 2 1/4" pipes (sold each) ��$31.99
650012
650043
650387
650389
650366
650364
Santee 'Lake Pipes'
Santee “Designer Series” ‘Y Pipes’ by John Reed
Created by Custom Chrome’s master designer John Reed to make a
statement and make it with authority. Available in 1 3/4" and 2" with
a tasty show chrome finish. Unless your neighbors are bikers too,
you’re going to ruffle some feathers with these pipes!
11447
1 3/4" for Softail models 84-11.��$239.99
650387 1 3/4” for Softail models 84-11 black ��$249.99
651045 1 3/4” for Softail models 12-13 chrome��$239.99
651046 1 3/4” for Softail models 12-13 black ��$249.99
650367 1 3/4" pipes for Pandemonium & Jammer 88 Shovelheads or
Pan/Shovel with STD cylinder heads ��$249.99
650010 2" for Softail models 84-11��$259.99
650317 2” for Softail models 84-11 black ��$229.99
651047 2” for Softail models 12-13 chrome ��$259.99
651048 2” for Softail models 12-13 black ��$229.99
650012 2" for 71-84 FX and 81-84 FL Shovelheads ��$249.99
650388 2” for 71-84 FX and 81-84 FL Shovelheads, black ��$229.99
Optional
650363
650364
650365
650366
She purrs like a kitten till the Lake Pipes roar (Beach Boys)! Styled
after the classic Street-Rod side pipes, they must be seen and heard
to be believed.
• 2" head pipes constructed of 16 gauge steel
• Choice of 2 outlet lengths
650042 5"-long outlet for Softails 86-11, chrome �� $449.99
650389 5"-long outlet for Softails 86-11, black �� $459.99
651041 5”-long outlet for Softails 12-13, chrome �� $449.99
651042 5”-long outlet for Softails 12-13, black �� $459.99
650043 11"-long outlet for Softails 86-11, chromé�� $449.99
650390 11"-long outlet for Softails 86-11, black �� $459.99
651043 11”-long outlet for Softails 12-13, chrome�� $449.99
651044 11”-long outlet for Softails 12-13, black �� $459.99
Note: Will not fit models with floorboards
Heat Shields
Optional heat shields for #11447 & 650142 ��$120.99
Optional heat shields for #650144 & 650010 ��$120.99
Optional heat shields for #650012 ��$120.99
Optional heat shields for #650367 ��$120.99
Santee
11
Santee “Designer Series” ‘Venom’ Pipes by Big
Bear Choppers
2 1/4” Drag Pipes
These 2" pipe sets are constructed of 14-gauge seamless tubing and
feature extreme slash cut tips. They come complete with mounting
brackets.
650029 ‘Venom’ for stock Softail models 86-11.��$279.99
650028 ‘Venom’ for Softail with 5/8" offset motor mounts 86-06.�$279.99
651055 ‘Venom’ for stock Softail models 12-13 ��$279.99
650035 Chrome heat shield set��$129.99
‘Big Mama’ Pipes for FX Softail Models from 84-13
Santee “Designer Series” ‘Skirt Blowers’ Exhaust
by Paul Yaffe Originals
Go BIG with ‘225’s from Santee! Huge 2 1/4”-diameter pipes deliver
wicked sound and all the performance you can handle. Made from 16
gauge seamless tubing.
For Softail Models
07719
For Softail models 84-11, chrome ��$246.99
650383 For Softail models 86-11 Black��$287.99
650023 Optional baffle for 2 1/4” pipes (sold each) ��$31.99
2 1/4" pipes featuring vertical slash cut tips which accent the angle
of the swingarm. This unique set of show-chromed pipes provides
a sleek custom look. Manufactured of heavy 16 gauge steel tubing,
precision bent on computer controlled equipment and hand checked
to ensure a perfect fit.
280142 For Softail models from 84-06.��$329.99
650023 Optional baffle for 2 1/4" pipes (sold each) ��$31.99
12
The latest and sickest pipe design from the mind of Paul Yaffe.
Straight up in your face styling with a multi-piece heat shield design
that will totally set your bike apart from the crowd. Includes a set of
velocty stack exhaust tips for a race-ready, all-business look.
600069 For Softail models 86-11, chrome ��$449.99
650386 For Softail models 86-11, black ��$459.99
651053 For Softail models 12-13, chrome ��$449.99
651054 For Softail models 12-13, black ��$459.99
1 3/4" Shotgun Drag Pipes
Classically styled high quality Shotgun Drags are made
of 16 gauge steel with beautiful chrome plating, great
bends and hot performance. Optional baffles may be
used if a quieter exhaust note is desired.
11047
For Softail models 84-06.�� $199.99
650152 For Softail models from 07-11 �� $210.99
11229
Baffles fits 1 3/4"-diameter pipes ��$3.99
Note: The installation of this pipe set on Fat Boy and FLSTN models will
require the removal of the stock rear exhaust pipe mounting bracket.
1 3/4" ‘S’-Style Drag Pipes
These slick looking drags have an ‘S’ shaped rear
pipe that crosses the transmission stacked above the
front pipe. Available in a variety of styles, they are
constructed of 16 gauge steel and feature flawless
chrome plating Each set uses hidden channel mounts
and includes all necessary hardware and brackets
except where noted otherwise.
‘Shorty Kickdown’ Drags for Softail Models from
86-06.
Includes an innovative chrome plated exhaust bracket
that replaces the tubular Original Equipment part
11323
Slash-Cut Drags for Softail models 86-06.
�� $259.99
For 4-Speed FL Models 70-84 (with kick or electric
start)
40"-long drag pipe set has an inside-the-frame front
pipe that fits with factory floorboards and forwardmounted master cylinder. The under-the-transmission
rear pipe clears the large battery, factory safety bars
and saddle bags. Easily mounted using optional
‘P’-clamps. Floorboard models require an optional
Floorboard Adaptor.
11038
1 3/4" Drag pipes�� $199.99
26312
Floorboard adaptor, Sold each�� $28.99
11216
P-Clamps 1 3/4" ��$7.99
11229
For FX Models 71-84 and 4-Speed FL Models
81-84.
Clear all Original Equipment footpeg and control
positions and provide superior fit with excellent
ground clearance. Complete with concealed channelmounts, chrome mounting bracket, exhaust port
gaskets, sockethead exhaust port screws with
lockwashers, and installation instructions. Optional
baffles may be installed when a quieter exhaust note
is desired.
11075
2” Slash-Cut Drags�� $239.99
13
Santee 1 3/4" Drags
Dyno Power drag pipes add both style and performance. These
smooth bracketless pipes may be mounted with ‘P’-clamps or with
the universal chrome exhaust mounting brackets listed below. Dyno
Power drags accept baffles when quieter exhaust note is desired.
11073
11034
651380
For Sportster models 57-85.
40"-long drag pipes mount using the universal drag pipe mounting
brackets listed below. 80 and later models require optional Brake
Pedal Stop. Will not fit XLCR, 79, or XR-1000 models.
11034
1 3/4" Drag pipes 40” long ��$159.99
651369 1 3/4" Straight drags 34" long��$159.99
651380 1 3/4" Goose Cut drags 34" long��$159.99
11086
Mounting Bracket for 1 3/4" set ��$42.99
11229
11020
11087
Santee 1 3/4" Slash Cut Drag Pipes
11048
Santee Drag pipes are made of 16 gauge steel with hidden channel
mounts that connect to your stock brackets or to supplied brackets
unless otherwise noted.
For Softail Models 84-11
11073
For Softail models 84-06.��$179.99
650151 For Softail models from 07-11 ��$179.99
11229
Note: 1990 thru 1994 Fat Boy and FLSTN models with shotgun exhausts require mounting
bracket CC #18499 except for CC #11122 which includes one.
For 4-Speed FX Models from 71-84.
11020
Slash-Cut Drags ��$199.99
11229
Santee 1 3/4" Upswept Drag Pipes for 71-84 FX
Models
These drag pipe sets are reminiscent of the ‘chopper’ pipes from the
60s. Available two ways; ‘Kick-Out’ style with a slick turned out look,
or for real nostalgia choose the ‘Trim-Tail’ system. Chrome mounting
bracket and hardware is included. Dyno Power pipes feature smooth,
even mandrel bends and fully-polished high-quality chrome-plating.
11048
‘Kick-Out’ Drags��$269.99
11049
‘TrimTail’ Drags��$271.99
14
For Sportster Models 86-03.
Front pipe mount includes integral brake pedal stop similar to stock.
Pipes will not fit models with Original Equipment forward controls.
11087
Slash-Cut Drags ��$159.99
11928
Chrome front heat shield ��$85.99
11930
Chrome rear heat shield ��$85.99
11229
697417
697412
697410
697414
697416
697413
697411
697415
Exhaust End Caps by Custom Chrome
To complement the ever popular 3.5” Rinehart mufflers we’ve come up with some stylish replacement end caps. Whether yours are scratched,
faded or you just want to change the look of your mufflers we have something for you. We even have a raw slug that you can powder coat,
anodize, machine or do whatever you like to. End caps are sold each and have a chrome or black Teflon coating.
697410 3.5” End cap Vortex chrome�� $59.99
697411 3.5” End cap Vortex black�� $55.99
697412 3.5” End cap Afterburner �� $61.99
697413 3.5” End cap Smoothie raw�� $52.99
697414 3.5” End cap Bullet chrome�� $79.99
697415 3.5” End cap Bullet black�� $69.99
697416 3.5” End cap Thruster chrome �� $79.99
697417 3.5” End cap Thruster black �� $69.99
Santee 2-Into-1 Headpipes for Softail
Models 86-06.
Modeled after the early-style 2-into-1 exhaust systems,
the two separate front and rear 1 3/4" headers
are joined with a tooled slip-fit connection for a
snug, leak-resistant seal that requires no external
clamping. This pipe set allows you to build a custom
system and includes a muffler clamp and mounting
bracket. Provides generous ground clearance and
won’t interfere with Original Equipment floorboards,
controls, footpegs or saddlebags.
11180
2-into-1 headpipe set�� $339.99
15
Santee Shotgun Pipe Builders Kit
For Pandemonium & Jammer 88” Shovelheads or Pan/
Shovelheads with STD Cylinder Heads
This is the perfect starting point for those one off Shotgun pipes you
are looking to build. They are designed to work perfectly with our
Pandemonium, Jammer 88” Shovelhead or any Panhead/Shovelhead
with STD cylinder heads. This kit comes complete with a front & rear
pipe with flanges pre-welded on and 2 channel mounts that can be
welded on where-ever you need them. The pipes come in a raw steel
so you can cut and weld them up and chrome, paint, or wrap them
up however you like. Made in the U.S.A.
650155 Santee Shotgun pipe builders kit.��$209.99
Santee Fishtail Straight Pipes
A set of unmuffled, 30"-long Fishtail straight pipes with 1 3/4"-inlets.
11402
Fishtail straight pipes, Sold in pairs��$183.99
Santee Baffled Fishtail Extensions
These 36"-long universal Fishtail extensions can be easily added to
existing headpipes. Sold each.
15971
1 3/4"-inlet ��$124.99
Universal Perforated Exhaust
Heat Shield
Chrome-plated 11"-long universal heat
shield fits a range of pipe and muffler sizes
from 1 3/4" to 3". Ideal for Shotgun or
upswept exhaust systems.
08877
Sold each��$39.99
Chrome Exhaust Heat Shield
7" chrome-plated heat shield for all 1 3/4"
diameter exhaust pipes. A unique integrated
clamp mounts this shield for a neat custom
appearance.
15980
Chrome heat shield (repl. OEM
65270-84T)��$15.49
688083 Chrome drilled heat shield (repl.
OEM 65270-84T)��$15.99
688078 Black 7” heat shield (repl. OEM
65270-84T)��$17.99
Universal Exhaust Pipe Heat
Shield
7"-long universal heat shield fits a range of
pipe sizes from 1 1/2" to 2". Ideal for protection on Shotgun or upswept systems.
15990
Floorboard Adaptor
Classic Fishtail Muffler
Show-chrome muffler with an antique-style tip. This clean, bracketless
muffler allows left or right side mounting and has a 1 3/4"-inlet, and
is 35"-long.
11419
16
Required for use when installing some
Santee exhaust systems on 4-speed FL
models equipped with floorboards. When
properly installed, it provides additional
clearance between the front pipe and the
right floorboard.
26312
Floorboard adaptor, Sold each
�� $28.99
Santee Designer Series ‘Bonanza’ Highway Bar by
Fred Kodlin
This is the latest from Fred Kodlin and the Murder Cycles crew. These
highway bars are the perfect match to the ‘Bonanza’ handlebar
series. The Highway Bars feature 1 1/4” steel tubing with built-in peg
mounts so there is no need for those bulky clamps. They are available
in a chrome-plated or black powdercoated finish.
Chrome
697174 ‘Bonanza’ highway bar for 09-12 Touring models (except FLTR
Road Glide models), chrome��$269.99
697168 ‘Bonanza’ highway bar for 97-08 Touring models (except FLTR
Road Glide models), chrome��$269.99
Black
697175
697169
‘Bonanza’ highway bar for 09-12 Touring models (except FLTR
Road Glide models), black��$259.99
‘Bonanza’ highway bar for 97-08 Touring models (except FLTR
Road Glide models), black��$259.99
Optional Footpeg Clevises (required if you want to run highway pegs)
652025 Chrome 3/8”-20 clevis, sold in pairs��$19.99
652026 Black 3/8”-20 clevis, sold in pairs��$19.99
Note: Not for use with factory lowered (FLHX, FLHRS) and aftermarket lowered bikes.
17
95039
Santee Low Glide Frames and Swingarms
If you’re after a stock look that’s as easy to build as bolting on parts,
choose our Low Glide frame. If you’re after a more radical custom
look with one of those really-wide rear tires, pick one of our Low
Glide Custom frames.
Low Glide Stock Replacement Frame
Stock-style frame kit accepts most Original Equipment or aftermarket accessories, with brackets and tabs for the coil, belt guard, late
87-99 rear brake caliper and master cylinder, ‘flatside’ gas tanks, oil
tank, shock absorbers and 86-99 fender struts. There is also a mounting loop provided on the right front downtube for 87-91 oil filter
housings. Everything bolts in place like on stock frames. Frames have
1"-diameter 1020 mild steel tubing with a stock 32° rake, no stretch,
and the swingarm is stock width with clearance for belt or chain
drive. The steering head uses stock bearings and cups. With correct
inner and outer primaries and transmission mounting plate, 4-speed,
5-speed or 6-speed transmissions can be installed. Include rear axle
and swingarm pivot shaft with bearings.
95039
Frame and swingarm kit �� $1,619.99
95037
Replacement frame ONLY (no swingarm)�� $1,339.99
95044
Swingarm pivot bearing and retaining clip for all Softail models
from 84-99 (repl. OEM 9076) �� $19.99
17289
1/4"-offset driveline offset kit (permits the use of a 1/2"-wider
rear tire)�� $79.99
Accessories for Low Glide Frames
Here are some items to finish a hot custom bike.
Bearings and Cups
12263
Chrome bearing cups (pair)�� $25.99
12264
Timken bearing (sold each)�� $9.99
‘Flatside’ Gas Tanks
15298
5 gallon �� $208.99
15294
6 gallon �� $189.99
25550
Gas tank mounting kit�� $49.99
Santee 4-Speed Rigid Frames
These Classic Santee frames are the perfect start to any ‘Old School’
build. Available with the classic look of either Wishbone or Straight
Leg style downtubes that Santee is known for. Frames accept any
Big Twin engine except Twin Cam (including Strokers and Evolution
motors). Frames are set-up for disc brakes and include rear axle kit.
Straight Leg Frames
650195 30º rake, 0" downtube stretch, 0" backbone stretch WITHOUT
tank mounts ��$999.99
Wishbone Frames
650201 30º rake, 0" downtube stretch, 0" backbone stretch WITHOUT
tank mounts��$999.99
Replacement Axle Kit
650241 Replacement axle for Santee 4-speed rigid frames��$109.99
650195
18
Optional Oil Tanks
650224 Custom 3.5 qt. oil tank with push-on hose barbs ��$284.99
650225 Custom 3.5 qt. oil tank with push-on hose barbs and spin-on
filter ��$354.99
651235
Weld-On Hardtail for Big Twins
A quick and easy method of converting swingarm frames
to rigid. It has the same wheelbase and ride height as
stock. Oil tanks for this hardtail include CC #s 12601,
12571, 12603, 12600, 12581, 12582 and 12585. CC #12554
chain guard should also be used.
08893
Fits hydraulic drum brake 4-speed swingarm
frames 58-72��$229.99
651233
651234
Weld-On Hardtail for Sportster Models
Fits early Sportster models with mechanical rear brakes.
It forms an almost-perfect straight line with the frame
backbone, and lengthens the motorcycle by 4" and
lowers it 4". The oil tank to use with this frame is a CC
#12599.
08889
Fits Sportster models 57-78��$219.99
Santee Rigid Frames for Sportster Models
Designed and available to fit all Sportster engines from 57-03, these frames
have a stock width rear section that will accept a 130mm rear tire with a
standard 1 1/8” final belt or chain. Made in the U.S.A.
651233 30° rake, 0” Backbone, 0” downtube stretch rigid frame for 57-76 XL
models without tank mounts��$919.99
Oil Tanks for XL Rigid Frames by
Paughco
Bolt-On Hardtail for Sportster Models
A bolt-on unit lengthens the wheelbase by 4 1/2" and
lowers the bike 4". The oil tank to use with this frame is
a CC #12599
08892
For Sportster models with mechanical rear brakes
57-78��$219.99
This oil tank is for use with the “Swedish” &
“Chopper” style rigid Sportster frames manufactured
by Paughco. Drain plug sold separately. Made in USA
by Paughco.
632247 Oil tank for use w/Paughco XL rigid frames
��$175.99
632248
Oil tank drain plug ��$7.99
19
20
General Warnings
Motorcycle riding is a dangerous activity. The only way to be sure to avoid
injury is not to ride! Even if you use the finest and best-maintained equipment,
wear a helmet and protective clothing, and take all possible precautions, it
is not possible to avoid every risk. Motorcycle accidents frequently result in
serious injury, including death. Please do not operate a motorcycle or other
motor vehicle when you are tired or under the influence of alcohol or drugs,
or when your perception is impaired for any other reason. At all times, please
wear a helmet, ride carefully and within posted speed limits, and obey all other
traffic regulations and instructions from law enforcement personnel.
Custom Chrome, sells aftermarket motorcycle parts for Harley-Davidson® and
other brands. If you do not have the necessary experience and skill, please have
a qualified mechanic install any new or replacement part on your motorcycle.
The failure to install properly and test any new or replacement component
could adversely affect your motorcycle’s operation and result in an accident,
including a fatal accident.
Federal and state laws and regulations impose restrictions on modifying the
engine, ignition, exhaust and other components of a motorcycle intended
for on-road use. In addition, these laws and regulations impose requirements
on windshields, brake components, lighting, and other equipment on your
motorcycle. Accordingly, certain parts in this catalog are for competition or
display purposes only. In general, those parts are indicated by a “Competition”
mark: a checkered flag in a yellow oval.
If you are a retail customer, you are responsible to know the laws and
regulations that govern the modification of your motorcycle. Custom Chrome is
not responsible if you modify your motorcycle or any component in violation of
law. If you have any questions regarding a particular component, please consult
your dealer or a qualified motorcycle mechanic.
The following is additional information relating to components for sale in
various sections of this catalog. This information is not exclusive – if you have
any questions regarding the installation or use of any component, please
contact your dealer, a qualified mechanic, or Custom Chrome’s customer
service department.
FOOT AND HAND CONTROLS
Warning: Components with sharpened ends could cause serious injury in case of
an accident. CCI recommends the use of these parts for display purposes only.
Master cylinder: These brake components have not been tested for compliance
with federal and state law. Because the brakes are the most important
safety system on your motorcycle, we recommend that you have your brakes
professionally installed and tested and regularly inspected and maintained, to
ensure that they comply with Federal Motor Vehicle Safety Standard 122 and
operate properly.
HANDLEBARS AND CONTROLS
Warning: The improper installation of handlebars or the other components
in this section could adversely affect your ability to handle your motorcycle,
resulting in a potentially serious or fatal accident. Please follow all installation
instructions included with your accessory. If the instructions are unclear, please
consult your dealer or a qualified mechanic for assistance.
Handlebars: Some states regulate handlebar height. Please check with your
Highway Patrol or Department of Motor Vehicles or with your local dealer to
ensure that your choice of handlebar is legal in your state.
Handlebar Grips: Components with sharpened ends could cause serious injury
in case of an accident. CCI recommends the use of these parts for display
purposes only.
Mirrors: Federal Motor Vehicle Safety Standard # 111 specifies requirements
relating to the size, shape, and installation of rearview mirrors. It is a violation
of federal law and the law of many states to install non-compliant mirrors on
motorcycles intended for on-road use. If you have any question whether a
mirror advertised in this Section complies with FMVSS 111, please consult your
dealer, a qualified mechanic, or CCI Customer Service.
LIGHTING AND ELECTRICAL
equipment on motorcycles intended for on-road use. If you have any question
whether any equipment advertised in this Section complies with FMVSS 108,
please consult your dealer, a qualified mechanic, or CCI Customer Service.
‘Beehive’ and ‘LED Snake Eye’ Taillights: These taillights do not comply with
federal and state law and are for off-road, competition, or display purposes only.
Rear Turn Signal Mounting Bars: These mounting bars may violate turn signal
spacing requirements in FMVSS 108 and thus should be used only on off-road,
competition, or display motorcycles.
ELECTRICAL
Warning: The modification of ignition timing, the installation of programmable
ignition systems, or other adjustments to your motorcycle’s electrical system
that have the effect of increasing horsepower may violate federal law or the
law of your state. Before modifying your motorcycle’s electrical system or
installing any aftermarket electrical component, please check with your dealer
to insure that the modification or installation is legal in your state.
Dynatec components: Certain of these components are not legal for sale in
California and certain other states.
EXHAUST AND INTAKE
Warning: Federal law and the law of most states govern motorcycle exhaust
emissions and noise. In many states, it is a violation of law to install an after
market exhaust system that results in emissions or noise at levels greater
than produced by your motorcycle’s original equipment. If you are uncertain
whether the installation of any after-market exhaust system is legal in your
state, please consult your dealer.
Straight pipes: The use of straight pipes without mufflers is illegal on
motorcycles intended for on-road use. These pipes are for competition or
display purposes only.
O² sensor port: The installation of this or any other oxygen sensor port does not
ensure that your motorcycle will remain in compliance with federal and state
emission control laws.
Diverter valves: The sale and installation of diverter valves is illegal in California
and certain other states. Please check with your dealer before installing a
diverter valve on your motorcycle.
FRAMES
Chassis Stabilizer: This chassis stabilizer has not been tested on all models of
motorcycle and may not perform as desired on some models, which could result
in a serious, potentially fatal accident. Test your motorcycle for handling and
stability after installation. If you have any questions or concerns, contact your
dealer or a qualified mechanic.
‘Highway’ Bars: These bars are for cosmetic use only and will not protect
your legs or lower body in the event of a fall, accident, or collision with an
automobile or other object.
Kickstands: If your kickstand does not retract when it contacts the ground as
you ride off, it could adversely affect your ability to handle your motorcycle,
which could result in a serious, potentially fatal accident. Ensure that your
kickstand is properly installed. If you have any questions or concerns, contact
your dealer or a qualified mechanic. Never ride with a kickstand that has a
missing retraction spring.
© COPYRIGHT 1982-2013 BY CUSTOM CHROME - A DIVISION OF DAE-IL USA, INC.
Warning: Federal Motor Vehicle Safety Standard #108 specifies requirements
relating to lamps, reflective devices, turn signals, and associated equipment.
It is a violation of federal law and the law of many states to install noncompliant lighting or reflective equipment on motorcycles intended for
on-road use. If you have any question whether any equipment advertised in
this Section complies with FMVSS 108, please consult your dealer, a qualified
mechanic, or CCI Customer Service.
Kodlin ‘Elypse,’ Kodlin ‘Mini-Square,’ and ‘Wave’ Headlights: These headlights
do not comply with FMVSS 108 and are for off-road, competition, or display
purposes only.
Taillights and License Plate Lights: FMVSS 108 governs the size and installation
of taillights, license plate lights and holders, and related equipment. It is a
violation of federal law and the law of many states to install non-compliant
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY BE REPRODUCED,
STORED IN A RETRIEVAL SYSTEM OR TRANSMITTED IN ANY FORM OR BY
ANY MEANS; ELECTRONIC, MECHANICAL, PHOTOCOPYING, RECORDING, OR
OTHERWISE WITHOUT PRIOR WRITTEN PERMISSION OF THE PUBLISHER.
Any “add-on” or “modified” emissions-related parts contained in this brochure that are subject to anti-tampering laws may or may not have been evaluated and/or
exempted by CARB. As a distributor, Custom Chrome makes no representation or warranty with respect to whether the emissions-related parts in this brochure are
legal for sale, installation or use in any state unless the part is installed in a vehicle used only for closed-course competition. Consult with the manufacturer as to any
such exemptions before purchasing any add-on or modified emissions-related parts for non-competition use in California or elsewhere.
21
World’s Finest Products For Harley-Davidsons
Service
Maintenance
Customization Repair
Performance
18225 Serene Drive | Suite 150 | Morgan Hill, CA 95037 | Printed in USA
22

Proudly Distributed by

Transcription

Similar documents

GV650 AIS Bypass.indd - Alternative Cruisers

KlipHanger BARS FOR 08

exhaust - Custom Chrome Europe

Window Sticker

Using Chrome`s Address Bar or Omnibox to the Fullest

hand held spray - Water Tight Canberra

GV650 Exhaust Mod - Alternative Cruisers

CHROME TURNDOWNS CHROME TURNDOWNS

The New Generation of Chrome Plating Solutions

ROUND 2 - AMT647 Munster Koach