our products › precast concrete

www.betonprovincial.com
OUR PRODUCTS ›
PRECAST CONCRETE
A
OUR EXPERIENCED TEAM OF ENGINEERS, DESIGNERS, ESTIMATORS
AND TECHNICIANS CAN OFFER YOU THE KNOWLEDGE, SKILLS
AND ABILITIES TO REALIZE ALL YOUR SPECIFIC PROJECTS.
TABLE OF CONTENTS
2 Rectangular culverts
6 Ter-Voile technology (Retaining Walls)
3 Vaulted culverts (Polyvoûte™)
8 Reinforced concrete pipes
4 Vaulted culverts (Matière™)
9 Manholes, catch basins and rectangular chambers
4 Opti-Cadres (rigid frame)
10 Safety barriers and other certified products
5 Different foundation
11 Technical manual
5 Hydrodynamic Separator
BÉTON PROVINCIAL
Béton Provincial offers a wide range of high-quality concrete products for ambitious construction projects. Specializing
in ready-mixed, precast or bituminous concrete, crushed stone and aggregate, Béton Provincial stands out by
providing unrivaled service and high-quality modern and durable products.
Today, Béton Provincial is present in all Eastern Canada and has over 75 ready-mixed concrete plants, 15 paving plants,
5 precast concrete megaplants and more than 20 portable computerized concrete plants, as well as a large number
of quarries, gravel pits and sand pits. The company also possesses an impressive fleet of over 385 ready-mix trucks
as well as conventional road transport equipment.
Our ultra-modern precast concrete plants produce in a controlled environment custom products and manufacture
pipes, rectangular or vaulted culverts, safety barriers, manholes and many other large precast concrete structures.
Our production facilities have recently been significantly enlarged, increasing our production capacity. This enables
us to respond to more larger infrastructure renovation projects at the same time. We have been able to adapt
ourselves to many more demanding standards and to match up to any engineering challenge proposed. Our facilities
enable us to manufacture and manipulate pieces up to 60 metric tons.
RECTANGULAR
CULVERTS
Our modern facilities and knowledge enable us to realize all types of rectangular culverts with gussets for the M.T.Q.
projects.
More than 7 of our rectangular vaulted culverts without gussets are homologated by severals agencies such as the
Ministère des Transports du Québec. The advantages with these products include: increasing the hydraulic area and
PRECAST CONCRETE
2
simplifying the installation of the culvert using the factory-installed rubber gaskets on the joints.
VAULTED CULVERTS
(POLYVOÛTE™)
A vaulted culvert (polyvoûte) is a precast engineered structure developped by our engineering team. It significantly reduces
worksite execution time and cost. The culvert is fabricated in a quality controlled environment and under ideal conditions
to achieve and even get over required design.
APPLICATIONS
ADVANTAGES
› Conduit for water under fill or a bridge.
› Quick and easy installation, reducing
worksite execution time and cost.
No scaffolding or falsework is needed.
› Custom production to exact
specifications within usual norms.
› Maintenance-free structure
everlasting.
› Highly versatile and esthetic.
› Environmentally respectful, making it
possible to keep the natural RiverBed
of a waterway.
Minimized worksite supervision
(Polyvoûte culverts are factory produced under ideal conditions making them
ready to install).
3
›
PRECAST CONCRETE
› Access passages like bicycle paths,
pedestrian walkways, etc.
VAULTED CULVERTS
(MATIÈRE™)
Matière is a patented technology used to manufacture vaulted structures with
spans over 20 meters and lengthwise and crosswise fracturing. For close to 20
years, more than 8000 structures have been built using this patented technology. Matière concept is especially suited for constructing:
› Cut and cover tunnels
› Underpass structures
› Hydraulic purpose structures
› Outlet artworks
OPTI-CADRES
(CLOSED CELL OR RIGID FRAME)
This reinforced precast concrete structure has a range of dimensions
PRECAST CONCRETE
4
that can reach 10-meters span.
STRUCTURES
(MASSIFS)
- FOUNDATION STRUCTURE (LIGHT BASE)
- SIGNALIZATION FOUNDATION
- PULL WELL
Structures are factory produced to meet specifications and tolerances (in mm) and delivered to the worksite. This facilitates
and speeds up installation, helping reduce lost work time and lower overall budget.
Recently, it took less than 15 minutes to install a 44-ton structure for an important highway project in Quebec on Henri IV
boulevard. The installation time that was saved minimized the inconveniences to drivers on this heavily travelled artery. The
industry is very sensitive to this issue and concerned about limiting lane closures on large thoroughfares.
The precast concrete structures eliminate the inconveniency and delay resulting of temperature conditions or curing period.
HYDRODYNAMIC
SEPARATORS
and other runoff-water sediments when it’s raining or when snow is melting.
The process protects against spills and other toxic discharges of hydrocarbons
into the rainwater drainage system. It is able to capture more than 80% of annual
sediment and hydrocarbon loads.
In fact, it is very efficient at protecting the ground water and other waterways.
“INLINE” MODEL FOR FLOWS
OF 20 TO 255 LPS
APPLICATIONS
› Pretreatment and
preventive action
› Large parking lots and gas
stations
› Waste snow disposal sites
“OFFLINE” MODEL FOR FLOWS
OF 57 TO 708 LPS
5
by rainwater. The drain intercepts and accumulates contaminated deposits, oils
PRECAST CONCRETE
The concept of hydrodynamic separation is used to minimize pollution generated
TER-VOILE TECHNOLOGY
(RETAINING WALLS)
Ter-Voile technology is a soil-retaining system, a cellular geostructure that is approved by the Ministère des Transports
du Québec.
The facing is made of precast concrete modules or metallic mesh and the retaining system is supported by galvanized
steel anchors. This system is known for being very stable and it’s rapidity of installation.
Ter-Voile technology has been used in numerous major projects in Eastern Canada throughout recent years, including work on
› Highways 5 and 50 in Outaouais
› Highways 20 and 85 in the lower St. Lawrence
› The interchange of highways 25 and 440 in Laval
APPLICATIONS
ADVANTAGES
› Highway retaining walls
› Quick and easy installation
› Underpass approach
› Reduced excavation and backfill
volumes
›Quays
› Shorelines protection
› Wingwalls at culvert extremities
› No temporary retention structure
required during wall erection
› Well known for everlasting stability
and easeness of installation
PRECAST CONCRETE
6
› Field technician on site at beginning
of the job
PRECAST CONCRETE
7
THIS SYSTEM IS KNOWN
FOR EVERLASTING STABILITY
AND IT’S EASENESS
OF INSTALLATION.
REINFORCED CONCRETE PIPES
Béton Provincial holds every certification required to fabricate reinforced concrete pipe for use in sanitary and stormwater sewer systems. These concrete pipes can also be used for roadway drainage.
ADVANTAGES
AVAILABLE DIAMETERS
› Unrivaled life expectancy
› Varying from 250 mm to 2400 mm
(classes III, IV and V)
› Everlasting durability
›Non-flammable
› Watertightness
PRECAST CONCRETE
8
› Superior structural capacity
› Available in storm sewer and sanitary
(domestic) types
MANHOLES, CATCH
BASINS AND RECTANGULAR
CHAMBERS
These precast products are available in standard dimensions, but it can also be custom made to your project specifications. We have increased our production capacity in order to match with the ever increasing demand for these
PRECAST CONCRETE
9
products in Eastern Canada.
SAFETY BARRIERS
“NEW-JERSEY” TYPE
(STANDARD, REINFORCED, DOCKABLE)
We manufacture large quantities of safety barriers in all our plants. They are easily available for rent, or they can be
purchased. We have 3.66 m, 1.8 m and 1.2 m standard barriers (GS1000). We also have 4 m safety barriers with
“I” connections. They are all certified to meet CSA standards. Many types of barriers are produced in our precast plants.
They’re available rapidly for purchase or leasing, the standard type is offered in 1.2 m, 1.8 m and 3.66 m. Same dimensions
are available in the reinforced type. The “I-lock” type is used on the M.T.Q. jobsites and the dockable version is mandatory
on bridge work. Every model is subject to C.S.A. specifications.
AVAILABLE FOR
PURCHASE OR LEASING.
TECHNICAL
MANUAL
The reference tool for planning and
designing your projects!
www.betonprovincial.com
OUR CERTIFICATIONS
› (BNQ) Bureau de Normalisation du Québec
› Ministère des Transports du Québec
PRECAST CONCRETE
› ISO 9001
11
› CSA A23.4
PRECAST CONCRETE
12
PRECAST CONCRETE
13