THE EYECON LED

THE EMERGENCY LIGHTING SPECIALISTS
THE EYECON LED
AESTHETICALLY PLEASING
SUSTAINABLE
EFFICIENT
DISCREET
AESTHETICALLY PLEASING
SUSTAINABLE
EFFICIENT
A VISUALLY
INNOVATIVE APPROACH TO
DISCREET
AAVISUALLY
VISUALLYINNOVATIVE
INNOVATIVEAPPROACH
APPROACHTO
TO
LED
LEDEMERGENCY
EMERGENCYLIGHTING
LIGHTING
The development of the EYECON LED range marks yet another unique progression in LED emergency lighting.
Another key strength of the EYECON LED is the reduced power
consumption of the LED emergency module.
The EYECON LED is specifically designed to offer a cohesive surface mounted escape route and open plan emergency
lighting solution within a specific project, maximising emergency light distribution and offering long term cost savings to
The EYECON LED module charges the Ni-Mh battery at 40% power
the client.
consumption compared to a conventional Ni-Cd charger. These
low parasitic power consumptions offer the client considerable long
Designed to seamlessly integrate into the interior aesthetic of prestigious modern developments and produced from the
term cost savings.
highest quality materials, the EYECON LED range will appeal to architects and consultants alike who require a flexible,
innovative and discreet approach to emergency lighting.
The EYECON LED is designed around the market-leading American
manufactured CREE LED. Configured in a single 1 watt configuration,
the EYECON/CREE combination offers an impressive 120 lumens
during emergency operation.
The operational life of the high power CREE LED’s is 50,000
hours. This equates to approximately five and a half years
continuous operation. The long operational life of an LED lamp is in
stark contrast to the expected life of a conventional 8 watt fluorescent
Emergency luminaire
Typical power consumption
Typical cost per unit of electricity
Typical running cost per fitting
per annum
Conventional NM 8 watt
emergency luminaire
5.5 watts
€0.18 KWh
€8.67
EYECON
2.3 watts
€0.18 KWh
€3.62
Based upon a site of 200 luminaires, the EYECON fitting offers a long term operational cost saving of over €1,000 per
annum.
This operational cost savings combined with the additional cost saving of never having to perform any re-lamping of
emergency fluorescent lamps makes the long term cost savings to client considerable.
SAMPLE SPECIFICATION
lamp which is approximately 5000 hours.
•
Surface mount discreet interior escape route and open plan emergency luminaire for non-maintained selfcontained applications.
In addition, if the EYECON LED needs to be embedded into a very inaccessible place,
using the EYECON LED virtually eliminates the need for routine lamp replacement.
•
There is really no cost comparison between the cost of the EYECON LED versus traditional fluorescent lamp options.
Flame retardant ABS plastic housing designed to optimise light distribution for escape route and open plan
applications.
With fluorescent lamps, the true cost of the lamp is the cost of replacement lamp plus the labour expense and time
needed to replace them - which can be considerable. Add to this the potential for interruptions to the workplace during
these mandatory maintenance procedures and the costs escalate even further.
These costs are significant factors with ever increasing operational costs, especially where there are a large number of
•
Lamp head that meets the 8500C glow wire test that makes the unit suitable for defined escape routes.
•
Custom made aluminum heat sink to maximise LED illuminous efficacy
and LED lamp life.
installed luminaires. For office buildings and large installations, maintenance costs
to replace lamps can be considerable. This issue can be virtually eliminated
•
Offering an impressive 120 lumens in emergency operation.
•
High temperature sealed nickel metal hydride batteries.
sustainable emergency lighting solution.
•
Housing dimensions -140mm diameter * 48mm high.
Nickel-metal hydride (Ni-Mh) batteries are commonly considered to
•
Detachable lamp head allowing a seamless aesthetically pleasing
with the EYECON LED.
In addition to the cost savings the EYECON LED offers, the
product range also offers the client an environmentally friendly and
exterior body with no exterior fixing screws.
have lower environmental impact than conventional nickel cadmium
(Ni-Cd) batteries, due to the absence of toxic cadmium.
•
20mm cable entry point on the rear of the product.
•
Ventilux five year product as standard.
•
Designed and manufactured to meet the requirements of EN61347-2-7, EN60598-2-22 and all applicable EU
The LED produces no infra red radiation hence making them suitable for
light sensitive applications such as art galleries and clothes shops and lastly,
LED’s have a further environmental advantage in that they contain no environmentally hazardous mercury, unlike
fluorescent lamps.
standards.
VENTILUX
manufactures and
supplies an extensive
range of emergency
lighting, standby power
and fire detection
equipment.
The company pays close
attention to the quality,
specification and
construction of its
products and is able to
offer a comprehensive
system design capability
to allow the effectiveness
of each installation to be
maximised.
With Ventilux installations
operating worldwide, the
company works in close
association with distributors and a number of
specialist emergency lighting conversion centres
throughout its market.
UNIT 2
ASHGROVE INDUSTRIAL ESTATE
KILL AVENUE
DUN LAOGHAIRE
COUNTY DUBLIN
IRELAND
TELEPHONE
+353 (0)1 214 8800
FACSIMILE
+353 (0)1 280 5729
E-MAIL
sales@ventilux.ie
ARBOUR COURT
ARBOUR LANE
KNOWSLEY IND EST
LIVERPOOL L33 7XE
UNITED KINGDOM
TELEPHONE
+44 (0)151 546 4155
FACSIMILE
+44 (0)151 546 3987
E-MAIL
sales@ventilux.co.uk
www.ventilux.ie
www.ventilux.co.uk
Order Code
EYNM3/LED
Mode of operation
Non-maintained
Input voltage
(other voltages upon request)
230V +6% -10% 50/60Hz
Battery charger
Constant current nominal charge current 85mA
Inverter
350mA constant current driver
Lamp
1 watt WHITE CREE LED - 50000 hr
Lamp colour
Cool white - 5000K
Charging monitor
High intensity GREEN LED
Recharge period
24 hours full recharge
(14 hours for 1 hour duration)
Degree of protection
IP20
Lamp head dimensions (mm)
140mm dia * 48mm high
Battery type
Rechargeable high temperature NiMh 4.8V 1300mAh AA cell battery
Power consumption
2.3VA
Cable entry
3 way fused terminal block
Terminal block fuse rating
3.0 amps
Maximum incoming cable size
cross sectional area mm2
Single 2.5mm2 or two 1.5mm2 cables
Emergency duration
3 hours
Lumen level in emergency
120 lumens
Luminaire class
Class II
Weight
1.1kg
Standards
EN61347-2-7, EN 60598-2-22, (BSEN4544. 102. 22)
Environment
00C to 300C up to 80% relative humidity
N5XP compatible
no
AUTOTEST compatible
no
Base colour
Standard white (RAL 9016)
other colours available upon request
Warranty period
5 years - please note the batteries are excluded from this warranty.
Spacing table for EYECON ESCAPE ROUTE (minimum 1 lux)
EYNM3/LED
Mounting height
Transverse to Wall
Transverse to Transverse
2.0 m
2.80 m
6.30 m
2.5 m
3.00 m
7.40 m
3.0 m
3.10 m
8.00 m
4.0 m
3.00 m
8.50 m
Spacing table for EYECON OPEN PLAN (minimum 0.5 lux)
EYNM3/LED
Mounting height
Transverse to Wall
Transverse to Transverse
2.0 m
3.20 m
6.90 m
2.5 m
3.80 m
8.20 m
3.0 m
4.10 m
9.30 m
4.0 m
4.30 m
11.10 m
THE EMERGENCY
LIGHTING
This publication is provided to outline specification details of Ventilux product and is not deemed to form any part of any offer or contract.
We adopt a policy of continuous product and services improvement and we reserve the right to vary details without prior notice.
SPECIALISTS
Doc no:- SAL-209-02