DEWETRON D310 brochure

Automotive
Energy & Power Analysis
Aerospace
Tr a n s p o r t a t i o n
G e n e r a l Te s t & M e a s u r e m e n t
DEWETRON
D300 SERIES
D300 series instruments
Ultra-p ortable Data Acquisition
With the D300 series we take the D310 and shrink the form
factor down to the smallest possible size without giving up
power or performance.
Key Features
Ultra-portable data acquisition instruments
Choice of ORION series A/D card(s)
The D300 can hold either 16 x MDAQ series DIFFERENTIAL
signal conditioning channels, or up to 32 channels of direct
voltage inputs up to ±10V. And when we install an ORION
series A/D card, you’ve got synchronous counter/encoder
inputs, plus digital input and output lines automatically, and
either two or four optional CAN BUS interfaces.
Fast data streaming up to 105 MB/s to SSD
A 10” touchscreen display is built into the top cover of the
D300 and D303 models, and it’s optional in the D3PC computer only model. The power input is a wide range DC that is
perfect for mobile and in-vehicle applications.
Includes SSD for the OS and 500 GB HDD for
data
The computer is the same powerful Intel i7 processor found
in the other D series models made in the USA: D310, D510,
and the D610. There are two PCI slots inside, which allows
for one of our interface cards to be installed in addition to the
ORION card, allowing you to add ARINC 429, MIL-STD-1553,
or perhaps an analog OUTPUT card to your D300 system.
Available from 8 to 32 channels
Turn-key software or develop your own
Up to 8 synchronous counter inputs
Optional CAN BUS, ARINC 429, MIL-STD-1553
Optional video cameras and inertial sensors
Tough shipping case included (except D3PC)
MIL-STD construction
Made in USA
Full year warranty
Online Information
www.dewamerica.com/D300
www.dewam eri ca. com
1
D300 SERIES
D300 Overview (with MDAQ conditioners)
10” touchscreen display
(INSIDE) Optional interfaces
for ARINC, 1553, CAN,
IRIG, GPS, etc.
DEWETRON
(INSIDE) ORION
series A/D card
Cooling system
with externally
accessible filters
Any two MDAQ-SUB 8
channel conditioners
Video cameras like:
DEWE-CAM-FW-70
DEWE-CAM-GIG-E-120
DEWE-CAM-USB, etc.
EPAD2 signal conditioners
for adding slow thermocouple
inputs, RTDs, voltages,
and currents (daisy-chain)
Hard tie-down points
9-29 VDC power
input connector
High-impact rubberized
side / corner protectors
Computer interfaces
(ethernet, USB 3.0,
USB 2,0, video, audio)
2
PCI card edge access
(for ORION and
interface cards)
TWIN Removable
2.5” drives:
120 GB SSD (C)
500 GB HDD (D)
www.de wame ric a .com/ D300
D300 System Specs
Portable, powerful, tough
Flexible signal conditioning
100% modular design
Wide range DC input
SureHAND basic specifications
D300 with MDAQ conditioners
Any two of our 8-channel MDAQ-SUB conditioners
N/A
16
32 (when either two 16 ch ORION cards are installed, or one 32 ch
ORION card is installed, plus the correct number of BNC panels)
Maximum analog input channels
D303 with Direct ORION inputs
DEWETRON
Input specifications
MDAQ-SUB positions
Main system
Total PCI slots
2 x half-length PCI slots (optionally converted to 2 x PCIe slots)
Hard disk
Removable 120 GB SSD (C) and removable 500 GB HDD (D) (both can be upgraded)
Data throughput to disk
50 MB/s typical; up to 105 MB/s using SSD 240 GB iMLC
Power supply
9~29 VDC. Includes external AC/DC power adapter.
10” XGA display, 1024 x 768 px, with resistive touchscreen (std. in D300 and D303, optional in D3PC)
Processor
D300 SERIES
Display
Intel i7 2.0 GHz CPU, on a standard industrial grade MiniITX mainboard
RAM
8 GB standard
Ethernet
3 x ethernet interfaces (1 Gb)
USB interfaces
4 x USB 3.0 ports AND 2 x USB 2.0 ports
Display output ports
2 x DisplayPorts and 1 x DVI output for connecting an external display
Operating system
Microsoft Windows7™ Professional, 64-bit operating system
Dimensions (W x D x H)
11.5W x 10.3D x 4.5H (inches) / 292 x 261.6 x 114.3 (mm) (without bumpers)
Weight
6 kg typical (13.2 lbs)
PCI slots
2 (one of them is normally used by the A/D card)
Environmental specifications
Operating temperature
-20 to 50°C (storage temperature -20 to 60°C)
Humdity
10 to 80% non-condensing, 5 to 95% relative humidity
Vibration
MIL-STD-810F, EN 60068-2-6, EN 60721-3-2 class 2M2
Shock
MIL-STD-810F, EN 60068-2-27
Required to complete this
model
Conditioners:
A/D card(s)
Software
Any two MDAQ-SUB modules
N/A (direct inputs wired to BNCs from the A/D card(s)
8 channel cards: ORION-1624-200 series, ORION-0816-5M series, ORION-0816-10M series
16 channel cards: ORION-1616-100 series, ORION-1622-100 series, ORION-1616-1000 series
32 channel cards: ORION-3216-100 series, ORION-3222-100 series
Turn-key software package: DS-7-SE or higher
32 analog channels, or multiple video cameras, or DEWE-CAM-FW-70, or DEWE-CLOCK use requires upgrade to PROF edition.
64 analog channels requires upgrade to DSA edition.
LabVIEW VIs are available for Dewetron ORION series A/D cards
Popular upgrades
Synchronization interface (ORION-SYNC)
Installs the SYNC hardware input/output ports and LED indicators onto the mainframe. Allows systems with the same base ORION card to be
synced. Additionally Requires DS-OPT-NET software option for synchronization under DS-7 software.
Digital Isolation (ORION-BASE-DI-ISO)
HDD upgrade to solid state disks
Isolation for the 16 digital inputs of ORION base cards.
Input low: 0 - 2 V, Input high: 3 - 50 V bandwidth: DC up to 1MHz
Isolation voltage between channels: 150 VDC, Isolation voltage between Input and Output: 250 VDC
Connector: DSUB-37 connector (replaces standard digital I/O connector)
HDD-UP-SSD-120
HDD-UP-SSD-240
HDD-UP-SSD-480
Upgrade to 120 GB flash disk (replaces standard spinning hard disk), $ no moving parts, max. data throughput 90 MB/s
Upgrade to 240 GB flash disk (replaces standard spinning hard disk), $ no moving parts, max. data throughput 90 MB/s
Upgrade to 480 GB flash disk (replaces standard spinning hard disk), $ no moving parts, max. data throughput 100 MB/s
Popular interface add-ons
CAN expansion
IRIG / GPS time code (DEWE-CLOCK-EXT)
Adds 2 synchronous high speed CAN bus interfaces to the ORION card inside the system. Includes two DB9 factory installed connectors for
these counters on the side panel of the D310, and rear panel of the DEWE-3040 and DEWE-3050. Includes DS-OPT-CAN software option supporting CAN BUS interface.
IRIG or GPS synchronized clock source for DEWETRON systems, installed inside a new DEWETRON base unit
Input: IRIG signal code A or B, AM or DC, or GPS signal
Output: TTL clock from 10 Hz to 10 MHz, PPS and ORION-DSA-SYNC, IRIG-B DC (requires DS-PROF or higher)
Please order GPS antenna GPS-ANT-1 or -2separately (if GPS is needed)
VIDEO-FG-4
Adds a four channel VIDEO INPUT PCI card to the system. Four BNCs for analog NTSC video input on the right side panel, allowing four video
streams to be recorded in sync with the data
ARINC-429 / 1553 interfaces
Adds a multi-channel ARINC-429 or MIL-STD-1553 interface to the system. Available as a single PCI card with either or both interfaces on it, or
as separate external USB interfaces. See the INTERFACES section for a comprehensive list.
External channel expansion
EPAD2 and CPAD2 series modules
Add one or more EPAD2 series external signal conditioners to your system. Each one provides 8 thermocouple, RTD, low voltage, or low current inputs. EPAD2 modules can be daisy-chained up to 8 modules per system. CPAD2 modules are the same except with CAN BUS interface.
3
System architecture at a glance
... it´s all about DEWE-ORION and system clock
D300 SERIES
DEWECAM-01
MDAQ
conditioners
ORION A/D card
DEWETRON
Signal
conditioning
Sensor
Analog
Inputs
Sensor
supply
CAN
Counter
Inputs
Digital
Inputs
Digital
Outputs
DEWE-CLOCK
ext.
Clock
int.
Clock
ARINC 429
data
1553 data
PCM data
e.g., sensors that output via serial bus
RS232
e.g., GPS position sensors, webcams, etc.
USB
e.g., webcams,
MiniDV cameras
Custom
Sensor Supply
4
e.g., data from
other systems
Firewire
CHASSIS
CPU/
RAM
SOFTWARE
DS-7 or
LabVIEW
Software sync of various PC bus interfaces (USB, ethernet, firewire, RS232...)
External Time
Source
INDUSTRIAL-PC
Ethernet
www.de wame ric a .com/ D300
Counter input features
DEWETRON has advanced the stateof-the-art in counter/encoder inputs in
our data acquisition systems, improving yet again our ORION-counters.
ADC-clock
Counter input
The key advancement is that our
counters are PHASE SYNCHRONIZED.
Referring to the diagram, you can see
that a standard counter is always a
sample behind. With software interpolation you can get closer, but only
with DEWETRON’s advanced time
shifting technology are both the
phase and amplitude fully corrected!
Ideal counting
ORION-counter
Software interpolation
Standard counter
DEWETRON
RPM-Measurement
Encoder
D300 SERIES
Tacho
Gearthooth, CDM
Gearthooth, TRG, CDM and TRG
Gearthooth with missing teeth
Gearthooth with double teeth
Length-measurement
Linear encoder
Linear pulse sensor
Event Counting
Basic counting
Gated counting
Up/down counting
Waveform Timing
Period frequency
Two pulse edge separation
Period, pulse width,
frequency, duty cycle
5
MDAQ Series Amplifiers
Multi channel
D300 SERIES
Small form factor for high channel density
Cost effective
DEWETRON
High bandwidth up to 300 kHz
SUB Modules for MDAQ-BASE-x
Module
MDAQ-SUB-STG-D
Connector: DB-9
# CH Input type
8
V
MDAQ-SUB-BRIDGE-D
Connector: DB-9
8
V
MDAQ-SUB-V-200-D
Connector: DB-9
Bandwidth (BW),
Excitation
Highpass filters (HP)
■
BW: 30 kHz
0 to 12 VDC
■
BW: 30 kHz
HP: 0.16 Hz
+15 VDC and
0 to 12 VDC
■
BW: 300 kHz
±15 VDC and
0 to 12 VDC
-
BW: 300 kHz
-
■
BW: 300 kHz
HP: 3.4 Hz
4 / 8 mA
■
BW: 300 kHz
HP: 0.16 Hz
4 / 8 mA
■
BW: 300 kHz
HP: 0.16 Hz, 3.4 Hz
4 / 8 mA
■
BW: 300 kHz
HP: 0.16 Hz, 3.4 Hz
4 / 8 mA
15 ranges from ±2.5 mV to ±10 V
7 ranges from ±0.25 mV to ±10 V
6 ranges from ±10 to ±200 V
full range of TC type
-200 °C to 1000 °C
and 0 to 6.5 kOhm
14 ranges from ±0.5 to 1000 mV/V
(@ 5 VDC excitation
15 ranges from ±2.5 mV to ±10 V
7 ranges from ±0.25 mV to ±10 V
6 ranges from ±10 to ±200 V
full range of TC type
-200 °C to 1000 °C
and 0 to 6.5 kOhm
* Voltage up to ±200 V:
* ICP, via MSI-V-ACC:
* Pt100, Pt200, Pt500, Pt1000, Pt2000
and resistance via MSI-V-RTD:
Note:
for safety reasons, max. 120 V DC or 50 V AC
13 ranges from ±0.125 to ±200 V
7 ranges from ±0.25 mV to ±10 V
-200 °C to 1000 °C
and 0 to 6.5 kOhm
8
* Voltage up to ±200 V:
13 ranges from ±0.125 to ±200 V
are allowed at this connector
Note:
for safety reasons, max. 120 V DC or 50 V AC are allowed at this connector
V
MDAQ-SUB-ACC-BNC
Connector: BNC
* Strain-gage (Full-, and half bridge)
for strain gage sensors:
* Voltage up to ±10 V:
* ICP, via MSI-BR-ACC:
* Voltage up to 200 V via MSI-BR-V-200:
* Thermocouple via MSI-BR-TH-x:
* Pt100, Pt200, Pt500, Pt1000, Pt2000
and resistance via MSI-BR-RTD:
TEDS
14 ranges from ±0.5 to 1000 mV/V
(@ 5 VDC excitation
8
V
MDAQ-SUB-V-200-BNC
Connector: BNC
* Strain-gage (Full-, half and quarterbridge, incl. shunt calibration)
for strain gage application:
* Voltage up to ±10 V:
* ICP via MSI-BR-ACC:
* Voltage up to 200 V via MSI-BR-V-200:
* Thermocouple via MSI-BR-TH-x:
* Pt100, Pt200, Pt500, Pt1000, Pt2000
and resistance via MSI-BR-RTD:
Input ranges
8
* ICP® or voltage up to ±10 V:
8 ranges from ±125 mV to ±10 V
Single-ended or differential input and one highpass filter
3.4 Hz highpass filter for noise and shock response measurement
MDAQ-SUB-ACC-BNC-S1
0,16 Hz for structural and modal analysis, human body vibration measurement
(rest same as MDAQ-SUB-ACC-BNC)
MDAQ-SUB-ACC-A-BNC
Connector: BNC
8
* ICP® or voltage up to ±10 V:
8 ranges from ±125 mV to ±10 V
Single-ended input and two HP filters
0.16 Hz for structural and modal analysis, human body vibration measurement
3.4 Hz for noise and shock response measurement
MDAQ-SUB-ACC-A-MD
Connector: Microdot
8
* ICP® or voltage up to ±10 V:
8 ranges from ±125 mV to ±10 V
Single-ended input, two HP filters and sensor failure detection
0.16 Hz for structural and modal analysis, human body vibration measurement
3.4 Hz for noise and shock response measurement
Option: test signal input for all channels
6
www.de wame ric a .com/ D300
# CH
16
Filter characteristics
Butterworth
Cut-off frequencies
100 Hz, 1, 10, 30, 100 kHz, Bypass
DEWETRON
Filter modules for MDAQ
Module
MDAQ-AAF4-5-BU
Order
th
4
Note:
not possible in all system configurations.
Please contact factory for details.
nd
16
Butterworth
30, 100, 300 Hz, 1, 10 kHz, Bypass
2
MDAQ-FILT-5-BU-S1
16
Butterworth
100 Hz, 1, 10, 30, 100 kHz, Bypass
2
MDAQ-FILT-5-BE
16
Bessel
30, 100, 300 Hz, 1, 10 kHz, Bypass
2
D300 SERIES
MDAQ-FILT-5-BU
nd
nd
Modular smart interfaces to connect various sensors
MSI interfaces
MSI-BR-V-200
Differential voltage adapter, for voltages up to +/-200V.
BNC connector.
TEDS for automatic MSI indentification.
MSI-BR-RTD
Pt100, Pt200, Pt500, Pt1000, and Pt2000 adapter, for RTD sensors. 5-pin BINDER 710 series input connector. RTD power is provided. 2, 3,
and 4 wire connection methods supported.
TEDS for automatic MSI indentification.
MSI-BR-ACC
Isotron / IEPE (constant current) conditioner for IEPE accelerometers and microphones. Excitation current 4 mA at 21 VDC, 1.5 Hz high-pass
filter, BNC connector.
TEDS for automatic MSI indentification.
MSI-BR-CHA-50
Adapter for dynamic charge sensors, range up to 50000 pC, AC coupled with 0.07 Hz, max. 100 kHz bandwidth (or limited to the max. bandwidth of the input that it is plugged into). BNC connector.
TEDS for automatic MSI indentification.
MSI-BR-TH-K
Thermocouple adapter, type K, high accuracy cold junction reference built-in.
1 m long thermocouple cable with Mini TC connector.
Isolated thermocouple sensors highly recommended for low-noise performance.
TEDS for automatic MSI indentification.
MSI-BR-TH-J
Same as MSI-BR-TH-K except for type J sensors.
MSI-BR-TH-T
Same as MSI-BR-TH-K except for type T sensors.
7
D300 SERIES
DEWETRON “D SERIES” INSTRUMENTS
Our “D series” instruments combine data acquisition excelence with an affordable price point. Choose
from among these basic models:
D3PC - Smallest mainframe system, capable of 8 x IEPE /low voltage inputs
DEWETRON
D310 - Smallest "all in one" D series instrument, with optional display and battery backup
D410 - Twice to number of possible channels as the D310, but not twice as big!
D510 - Benchtop and Rackmounting "convertible" unit, capable of up to 96 fast channels
D300 series
8 or 16 channels
Ultra-portable
15" touchscreen
(optional)
8 to 32 channels
10" touchscreen
DC powered
Attachable UPS
option
MDAQ series
conditioners or
±10V inputs
DAQ/HSI or MDAQ
conditioners
Made in USA
Made in USA
D410 series
D510 series
16 to 32 channels
Touchscreen
display
Convenient form
factor
DAQ/HSI or MDAQ
conditioners
16 to 128 channels
DAQ or MDAQ
conditioners
Benchtop or rackmounting conversion
within 5 minutes
Made in USA
Service with a Smile!
When you build something, you have to support it. If it’s an instrument, then you also need to be able
to calibrate it according to NIST and ANSI Z540 standards. This is exactly what we can do for you,
both in America and in Europe, using our modern Fluke Met/CAL® automated calibration procedures.
We have comprehensive service and support facilities around the globe, ready to support our customers, which are increasingly global in nature. We stand behind our products, which means that we stand
behind you. If you additionally require ISO/IEC 17025 certified calibration we can provide that, too.
We are proud of our products, and we are ready, willing, and able to support them 100%, to ensure
your satisfaction and continued patronage. Won’t you give us a try, and find out for yourself about the
Dewetron difference?
DEWETRON, INC. • 10 High Street, Ste K • Wakefield•RI•02879•USA
Tel (+1) 401-284-3750 • Fax (+1) 401-284-3755 • sales@dewamerica.com
Printing version 8/15/2014
8
www.de wame ric a .com/ D300
All trademarks are acknowledged to be the property of their owners. Specification subject to change without notice. © 2014 DEWETRON, INC
D310 series