Britax Bassinet with Click and Go

BASSINET
WITH CLICK AND GO ATTACHMENT
INSTRUCTION MANUAL
BG-0305
IMPORTANT: KEEP THIS BOOKLET IN A SAFE PLACE FOR FUTURE REFERENCE
Series No. PB2001
WARNINGS
RETAIN FOR FUTURE REFERENCE.
READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND USE
OF THIS BASSINET. ALWAYS FOLLOW THE INSTRUCTIONS.
THE CORRECT USE AND MAINTENANCE OF THIS PRODUCT IS
ESSENTIAL.
WARNINGS:
• DO NOT USE THE BASSINET ONCE THE CHILD CAN SIT UP.
• IT IS UNSAFE TO USE ACCESSORIES NOT APPROVED FOR USE WITH
THIS BASSINET.
• DO NOT USE ANY ACCESSORIES OTHER THAN THOSE APPROVED FOR
USE WITH THIS BASSINET BY BRITAX.
• THE MAXIMUM WEIGHT OF THE CHILD USING THIS PRODUCT IS NOT TO
EXCEED 9KGS.
IMPORTANT NOTES
• THE BASSINET CAN BE USED ON THE FOLLOWING STROLLERS:
1. BOB MOTION STROLLER SERIES WHEN USED IN CONJUNCTION WITH
#39577 AGILE CLICK & GO RECEIVERS (SOLD SEPARATELY).
2. BOB REVOLUTION SE STROLLER & BOB IRONMAN STROLLER WHEN
USED IN CONJUNCTION WITH #CS1110 BOB INFANT CARRIER ADAPTER
(SOLD SEPARATELY).
3. STEELCRAFT AGILE/AGILE PLUS STROLLER SERIES WHEN USED IN
CONJUNCTION WITH #39577 AGILE CLICK & GO RECEIVERS (SOLD
SEPARATELY).
4. STEELCRAFT STRIDER COMPACT STROLLER SERIES WHEN USED IN
CONJUNCTION WITH #39580 STRIDER CLICK & GO RECEIVERS (SOLD
SEPARATELY).
5. BRITAX E-BRAKE STROLLER SERIES WHEN USED IN CONJUNCTION
WITH THE STRIDER CLICK AND GO RECEIVERS SUPPLIED WITH THE
STROLLER.
6. BRITAX AFFINITY STROLLER SERIES.
02
IMPORTANT NOTES
• REMOVE THE *STROLLER SEAT OR *INFANT CARRIER FROM THE
STROLLER FRAME BEFORE FITTING BASSINET WHERE NECESSARY.
• ALWAYS REMOVE YOUR CHILD FROM THE BASSINET BEFORE FITTING
OR REMOVING FROM THE STROLLER FRAME.
• THE BASSINET MUST ALWAYS FACE TOWARDS THE HANDLE OF THE
STROLLER.
• THE BASSINET MUST BE REMOVED FROM THE FRAME BEFORE FOLDING.
• DO NOT LIFT THE STROLLER BY THE BASSINET.
* PLEASE REFER TO THE INSTRUCTION MANUAL SUPPLIED WITH YOUR
STROLLER OR INFANT CARRIER.
03
MANUAL HANDLING TECHNIQUES
The SMART lifting technique
This technique can be used to pick up small light loads from low levels.
Size up the Load
• Assess the load (size, shape and weight).
• Assess whether the load needs to be moved;
• Where is it going to be placed” Check that there are no obstructions;
• Assess whether mechanical or human assistance is required.
Move the Load as close to the body as possible
• A load is heavier to lift or carry if it is not close to the body.
• The whole hand should be used to ensure a firm grip.
Always bend your knees
• Maintain balance.
• Keep feet apart and in a comfortable position.
• Minimise lower back bending.
• Bend knees preferable at as large an angle as possible but not at a right angle use a semi squat in preference to a full squat.
Raise the load with your legs
• Achieve the lift smoothly and without jerkiness.
• Maintain the normal curvature of the spine to allow the force of the load to be
distributed evenly from the spine to the pelvis.
Turn your feet in the direction that you want to move the load.
• Avoid unnecessary bending, twisting and reaching.
• Change direction by turning your feet and not your back.
• To set the load down, squat down, keep your head up and let
• Let your legs do the work.
Remember to ‘THINK TALL’ chest lifted, shoulders relaxed, chin tucked in
and head level.
04
PARTS LIST
1 x Bassinet Frame
1 x Bassinet Liner
1 x Bassinet Mattress
1 x Bassinet Boot Cover
05
BASSINET ASSEMBLY
A Locate the straps in the centre of the frame support rods and pull the straps
outwards until each rod slides and locks under the clips.
B Gently push the upper frame of the bassinet downwards to check that the
frame support rods are engaged securely under the frame clips.
A
B
C Place the bassinet liner in the bassinet and pull it over each corner of the frame.
Ensure the body band is laying on the surface of the liner.
06
BASSINET ASSEMBLY
D Fasten hook and loop tabs on each side of the bassinet liner around each of
the handle mouldings.
E Put the mattress into the bassinet and place the body band on the top surface
of the mattress.
F Attach the hook tabs located on both sides of the canopy and on the back of the
canopy to the loop tabs on the bassinet.
D
E
F
07
TO USE THE BASSINET
BODY BAND & D-RING ATTACHMENTS
A Place your baby in the bassinet. Place the baby band around your baby’s
abdomen close to the body without constricting the baby and carefully fasten
the two sides of the body band with the hook and loop strips. D-Rings are
installed on the base of the bassinet for use of an optional baby harness (sold
separately). If using a harness D-Ring will need to be inserted through the
button holes in the side of the bassinet liner.
08
TO USE THE BASSINET
BOOT COVER
A Place the bassinet boot cover over the bassinet and attach the hook tabs on
each side of the boot cover to the loop tab on each side of the canopy.
CANOPY
A To adjust the canopy, press the buttons on both sides of the canopy and
swivel the hood into the desired position.
CAUTION:
ENSURE THE CANOPY IS SECURELY
ENGAGED BEFORE YOU LIFT THE BASSINET BY THE HANDLE.
09
TO USE THE BASSINET
FITTING THE BASSINET ON THE STROLLER
PLEASE REFER TO PAGE 4 FOR SMART LIFTING TECHNIQUES
A Engage the stroller brake. (PLEASE REFER TO THE INSTRUCTION MANUAL
PROVIDED WITH YOUR STROLLER.)
B Install the receivers on the stroller. (PLEASE REFER TO THE
INSTRUCTION MANUAL PROVIDED WITH YOUR STROLLER OR THE
INSTRUCTION MANUAL PROVIDED WITH YOUR RECEIVERS.)
NOTE: The bassinet can only be installed in the rearward facing position
(baby facing mother position) on the stroller.
C Lift the bassinet above the stroller and locate the Click & Go attachments on
the bassinet with the receivers on the stroller.
D Lower the bassinet until it engages into the receivers on both sides of the
stroller and push down until an audible ‘click’ is heard.
E Ensure the bassinet is securely connected to the stroller by pulling up on the
canopy handle.
10
TO USE THE BASSINET
REMOVING THE BASSINET FROM THE STROLLER
PLEASE REFER TO PAGE 4 FOR SMART LIFTING TECHNIQUES
A Use both hands to pull the left and right lever of the adapter on the bassinet
upwards and lift the bassinet away from the stroller.
CARE AND MAINTENANCE
•
•
•
•
•
•
•
To prolong the life of your bassinet keep it clean and do not leave it in
the direct sunlight for extended periods of time.
Removable fabric covers and trims may be cleaned using warm water
with a household soap or mild detergent. Allow it to dry fully,
preferably away from the direct sunlight.
DO NOT DRY CLEAN, OR USE BLEACH.
Do not machine wash, tumble or spin dry, unless the care labeling
on the product permits these methods.
Non removable fabric covers and trims may be spot cleaned using a
damp sponge with soap or a mild detergent. Allow it to dry completely
before folding or storing it away.
In some climates the covers and trims may be affected by mould and
mildew. To help prevent this occurring, do not fold or store the
product if it is damp or wet. Always store the product in a well
ventilated area.
Always check parts regularly for tightness of screws, nuts, and other
fasteners - tighten if required. To maintain the safety of your nursery
product, seek prompt repairs for bent, torn, worn or broken parts.
THIS PRODUCT IS NOT INTENDED FOR COMMERCIAL USE.
11
youtube.com/britaxaustralia
facebook.com/britaxaustralia
twitter.com/britaxaustralia
pinterest/britaxaustralia
britax.com.au
1300 303 330
BRITAX CHILDCARE PTY. LTD.
A Britax International Company
ABN 55 006 773 6000
99 Derby Road Sunshine
Victoria 3020 Australia
Due to the variations in style and design of our products, the
illustrations used in this instruction booklet are generic.
We reserve the right to alter these products without notice.
The Britax Trademark is the property of Britax Childcare
Holdings Limited - UK.
Britax Childcare Pty Ltd
(Customer Service 1300 303 330)
Britax Childcare (NZ) Ltd
(Customer Service 0508 688 822)
This product is designed to comply with Australian and
New Zealand standard AS/NZS2088:2013 “Prams and
Strollers - Safety Requirements.”
2013 Copyright Britax Childcare Pty. Ltd. Australia
12
Art No. 4001780_B