Multipin Connector

Transcription

Multipin Connector
Pressure
Viewport
Isolator
Thermocouple
Coaxial
Multipin Connector
Feedthrough
B.0
MULTIPIN CONNECTOR
Description
CeramTec’s multipin connector category of products describes hermetic
feedthroughs of two or more conducting pins that accept plugs on
the air side. Some connectors allow
for plugs on the vacuum side as
well.
Product variations include Sub D
(MIL-C-24308) type and circular connector types MIL-C-26482 and MILC-5015.
The products in this section are used
primarily to provide instrumentation
signals, voltage and/or current into
an ultra-high vacuum environment,
high pressure, or many other
extreme environments, with an inline connection to outside instrumentation. Designs adapt a
Ceramaseal® feedthrough (receptacle) with an industry-standard plug.
The connector assembly is characterized by the Mil Spec designation,
installation method and number of
pins. In situations where voltage
and current requirements are moderate, CeramTec is able to achieve a
very high pin density using glassceramic technology. CeramTec's
designs include both single-ended
and double-ended connector
assemblies.
Standard Specifications
• Voltages to 12 kV DC
• Current to 40 Amps per pin
• Temperature Range:
-269˚ C to 450˚ C
• Internal Pressure 1 x 10-10
torr to 600 psig
• Up to 51 pins/conductors
Technical Reference
Accessories
Extreme / Custom Design
54
Introduction
• 940-pin connector using thermocouple and instrumentation leads
• Combination multipin and
coaxial connectors with a custom
plug
• Multiple combinations of circular
and D connectors in a flange
• Plugs bakeable to 650˚ C
Installation
Standard installation mountings
include:
Typical Multipin Connector
Construction
• Weld (Pulse-TIG, TIG, Laser, E-Beam)
• ISO KF flange
• ConFlat flange
• NPT fitting (see Pressure section)
• 1” Baseplate
For details and information on connector assembly installation, please
refer to the Technical Reference
section. For additional vacuum-side
attachments, see the contacts and
plugs in the Accessories section.
Conductor
Adapter
Sleeve
Insulator
Tube
Applications
A few of the many applications in
which these multipin connectors
are commonly used are:
• Semiconductor processing
equipment
• Analytical test and measurement
equipment
• Pressure transducers
• Power generation: measurement
and control
• Particle accelerators
• Furnaces
• Energy research
• Commercial & military aircraft
USA: (800) 752-7325
www2.ceramtec.com
Adapter
Flange
sales@ceramtec.com
MULTIPIN CONNECTOR
5 Amps
9, 15, 25
and 50
Gold-Plated
300 Series
Stainless Steel
Sub D Type
MIL-C-24308
B.1
56-57
1 kV
5 Amps
3, 6, 10,
19, 32
and 41
Gold-Plated
300 Series
Stainless Steel
Circular Type
MIL-C-26482
B.2
58-61
700 V
7 Amps
4, 6, 10,
20, and 35
Alumel
Circular Type
MIL-C-5015
B.3
62-63
700 V
to 40 Amps
2 and 4
Nickel,
Molybdenum
Circular Type
Power: MIL-C-5015
B.4
64-67
12 kV
13 Amps
2, 4,
and 7
Molybdenum
High Voltage
B.5
68-69
to 700 V
7 Amps
8 and 10
Alumel
Baseplate
B.6
70-71
(Amps per conductor)
500 V
Thermocouple
Sub-section
Section
Pages
Coaxial
Conductor
Material
Current
Multipin Connector
# of
Conductors
Voltage
DC
Feedthrough
Type
B.0
Table of Contents
Isolator
Viewport
Pressure
Accessories
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
55
Isolator
Thermocouple
Coaxial
Multipin Connector
Feedthrough
B.1
Sub D Type
MIL-C-24308
MULTIPIN CONNECTOR
Sub D Type (MIL-C-24308) Connectors
CeramTec’s hermetic Subminiature D type connectors are
designed to meet MIL-C-24308 specifications. Standard configurations include 9, 15, 25, and 50 gold plated pin connectors,
which are available as a weldable unit or in a ConFlat® or ISO
flange. Custom configurations are commonplace and available
upon request. CeramTec is able to achieve a very high pin/lead
density (standard - up to 50 pins) using glass-ceramic sealing
technology. The rugged stainless steel shell design is built to
withstand severe environments and reduces seal failure due to
overheating while welding. These connectors are used primarily to provide instrumentation signals, voltage and/or current
into a high-vacuum or ultra-high vacuum environment, with an
in-line connection to outside instrumentation.
Weldable
ISO KF
In-Vacuum Ribbon Cable
CeramTec’s in-vacuum ribbon cable is designed to complement
our Sub D Type (MIL-C-24308) hermetic multipin connector
product line and therefore cable configurations include 9, 15, or
25 conductor cable. Note that 50 conductor cables are created
by using two 25 conductor cables. Each of the Kapton®
wrapped (19 x 0.0063) 22 AWG silver plated copper conductors
are woven with a PEEK (polyether ether ketone) monofilament
in order to achieve the ribbon cable form. The multistranded
wrapped cable offers the most flexible solution and has a temperature range up to 200° C. All ribbon cable assembly materials are ultra-high vacuum (UHV) compatible. The ribbon cables
are vacuum baked out prior to shipping. Additional vacuum
bake out prior to use is also recommended. All cable assembly
components are sold separately.
ConFlat
Specifications
Viewport
Materials
Shell: 304 Stainless steel
Pins: 300 Series Stainless steel (Gold Plated)
Insulation: Glass-ceramic
Magnetic Materials: No
Materials
Voltage Rating 500 V DC
Technical Reference
Accessories
Pressure
Current Rating 5 Amps per pin
56
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
Pressure @ 20°C ISO KF 0 PSIG
9 Pin - 1350 PSIG (93.1 Bar)
15 Pin - 1250 PSIG (86.2 Bar)
Vacuum Side Plug Specifications
Materials
Ribbon Cable Specifications
Insulation: Kapton® Type FN
Weave: PEEK (polyether ether ketone)
monofilament
Number of Conductors 9, 15, 25
25 Pin - 1200 PSIG (82.7 Bar)
50 Pin - 900 PSIG (62.1 Bar) Conductor
22 AWG 19 / 0.0063” stranded silver
plated copper
Shell/Insulation: PEEK (polyether ether ketone)
Crimp Contacts: Copper alloy (Gold Plated)
Magnetic Materials: No
Voltage Rating 500 V DC
Current Rating 15 Amps
Voltage Rating 600 V AC, 850 V DC
Current Rating 5 Amps per conductor
Resistance @ 20˚C 119 Ω /km
Temperature Range -55°C to 200°C
Temperature Range -269°C to 200°C
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
Sub D Type
MIL-C-24308
MULTIPIN CONNECTOR
NO.
PINS
Weld
Weld
Weld
Weld
1.234 [31.34]
1.562 [39.67]
2.102 [53.39]
2.738 [69.54]
16800-01-W
16801-01-W
16802-01-W
16804-01-W
-
-
18605-01-KF
18606-01-KF
20306-01-CLF
20307-01-CLF
-
-
18607-01-CF
18608-01-CF
21108-01-CF
18609-01-CF
21109-01-CF
18610-01-CF
21641-01-CF
ISO FLANGE
9
15
25
50
NW40KF
NW50KF
NW63LF
NW100LF
CONFLAT FLANGE
ConFlat
Air Side Plug
2 3/4” (NW35CF)
3 3/8” (NW50CF)
4 1/2” (NW63CF)
4 1/2” (NW63CF)
4 1/2” (NW63CF)
6” (NW100CF)
6” (NW100CF)
VOLTAGE
CONTACTS
DC
QTY AMPS MATERIAL
TYPE
500 V
500 V
500 V
500 V
500 V
500 V
500 V
500 V
500 V
500 V
500 V
500 V
9
15
25
50
9
15
25
50
9
15
25
50
5
5
5
5
5
5
5
5
5
5
5
5
Copper Alloy
Copper Alloy
Copper Alloy
Copper Alloy
Copper Alloy
Copper Alloy
Copper Alloy
Copper Alloy
Copper Alloy
Copper Alloy
Copper Alloy
Copper Alloy
DIMENSIONS
W
1.7 [43]
1.6 [41]
1.9 [48]
2.0 [51]
1.3 [33]
1.6 [40]
2.2 [55]
2.7 [69]
1.3 [33]
1.6 [40]
2.2 [55]
2.7 [69]
1.2 [31]
1.6 [41]
2.2 [56]
2.6 [66]
0.4 [11]
0.4 [11]
0.4 [11]
0.5 [14]
0.4 [11]
0.4 [11]
0.4 [11]
0.5 [14]
H
TEMPERATURE ˚C MAGNETIC
MIN
MAX MATERIALS
0.6 [15]
0.6 [15]
0.6 [15]
0.7 [18]
0.63 [16]
0.63 [16]
0.63 [16]
0.63 [16]
0.63 [16]
0.63 [16]
0.63 [16]
0.63 [16]
-55
-55
-55
-55
-200
-200
-200
-200
-200
-200
-200
-200
105
105
105
105
200
200
200
200
200
200
200
200
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
PART
NUMBER
18076-01-A
18076-02-A
18076-03-A†
18076-04-A
16810-01-A
16811-01-A
16812-01-A†
16814-01-A
19827-01-A
19828-01-A
17411-01-A
19829-01-A
Viewport
Air Side
Air Side
Air Side
Air Side
Vacuum Side-Female
Vacuum Side-Female
Vacuum Side-Female
Vacuum Side-Female
Vacuum Side-Male
Vacuum Side-Male
Vacuum Side-Male
Vacuum Side-Male
D
Isolator
Vacuum Side Plugs
9
15
15
25
50 (2x25)
50
100 (2x50)
Thermocouple
0.720 [18.29]
0.720 [18.29]
0.720 [18.29]
0.832 [21.13]
Coaxial
PART
NUMBER
Multipin Connector
B
DIMENSIONS
9
15
25
50
ISO KF
A
INSTALLATION
Feedthrough
Weldable
B.1
Note that contacts are included with all plugs.
CONDUCTOR
QUANTITY*
9
CABLE
LENGTH
19”
CABLE
WIDTH
INSULATION
DIAMETER
WIRE
DIAMETER
PART
NUMBER
0.4
Ø .035
19 X 0.0063
20370-19-WW
Contacts
20371-39-WW
20372-19-WW
20372-39-WW
21128-01
PART
NUMBER
Copper Alloy
Copper Alloy
Female accepts wire up to 0.040 [1.0]
Male/Pin contact - 0.040 [1.0] Pin
For 0.025” – 0.075” Crimp Diameters
16757-02-A
17412-02-A
2840-05
www2.ceramtec.com
TEL: (864) 682-3215
Technical Reference
DESCRIPTION
**Contacts priced and sold in packages of 5. See the Accessories section for more information on all accessories.
sales@ceramtec.com
20371-19-WW
MATERIAL
TYPE
0.040 Female Crimp Contacts
0.040 Male/Pin Crimp Contacts
Crimp Tool
20370-39-WW
Accessories
9
39”
0.4
Ø .035
19 X 0.0063
15
19”
0.7
Ø .035
19 X 0.0063
15
39”
0.7
Ø .035
19 X 0.0063
25
19”
1.2
Ø .035
19 X 0.0063
25
39”
1.2
Ø .035
19 X 0.0063
Adjustable Wire Stripper
For 20 - 30 AWG (0.25 - 0.80 mm)Cable
*The 50 conductor cables are created by using two 25 conductor cables. Contact CeramTec for custom lengths.
Pressure
Ribbon Cable
22 AWG
57
Circular: Single Ended
MIL-C-26482
MULTIPIN CONNECTOR
Single Ended - Straight Pin
Single Ended - Solder Cup
Weldable
Weldable
ISO KF
ISO KF
Thermocouple
Coaxial
Multipin Connector
Feedthrough
B.2
ConFlat
Accessories
Pressure
Viewport
Isolator
ConFlat
Specifications
Materials
Shell: 304 Stainless steel
Pins: 300 Series Stainless steel (Gold plated)
Insulation: Glass-ceramic
Magnetic Materials: No
Voltage Rating 1 kV DC
Current Rating 5 Amps per pin
Technical Reference
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
58
Pressure @ 20°C
ISO KF 0 PSIG
3 Pin - 550 PSIG (38 Bar)
19 Pin - 400 PSIG (28 Bar)
6 Pin - 500 PSIG (34 Bar)
32 Pin - 375 PSIG (26 Bar)
10 Pin - 450 PSIG (31 Bar) 41 Pin - 350 PSIG (24 Bar)
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
Circular: Single Ended
MIL-C-26482
MULTIPIN CONNECTOR
3
6
10
19
32
41
Straight
Straight
Straight
Straight
Straight
Straight
Weld
Weld
Weld
Weld
Weld
Weld
0.745 [18.92]
0.870 [22.10]
0.995 [25.27]
1.120 [28.45]
1.370 [34.80]
1.495 [37.97]
0.51 [13.0]
0.51 [13.0]
0.51 [13.0]
0.51 [13.0]
0.51 [13.0]
0.57 [14.5]
16130-02-W
16131-02-W
16132-02-W
16133-02-W
16134-02-W
16135-02-W
3
6
10
19
32
41
Straight
Straight
Straight
Straight
Straight
Straight
-
-
17160-01-KF
17161-01-KF
17162-01-KF
17163-01-KF
17164-01-KF
17165-01-KF
-
-
18894-01-CF
18895-01-CF
18896-01-CF
18897-01-CF
18898-01-CF
18899-01-CF
16757-02-A
ISO FLANGE
NW25KF
NW40KF
NW40KF
NW40KF
NW40KF
NW50KF
CONFLAT FLANGE
3
Straight
2 3/4” (NW35CF)
6
Straight
2 3/4” (NW35CF)
10
Straight
2 3/4” (NW35CF)
19
Straight
2 3/4” (NW35CF)
32
Straight
2 3/4” (NW35CF)
41
Straight
3 3/8” (NW50CF)
Female Crimp Contacts Female accepts wire up to 0.040 [1.0]
*Contacts priced and sold in packages of 5.
PIN TYPE
INSTALLATION
A
B
PART
NUMBER
3
6
10
19
32
41
Solder Cup
Solder Cup
Solder Cup
Solder Cup
Solder Cup
Solder Cup
Weld
Weld
Weld
Weld
Weld
Weld
0.745 [18.92]
0.870 [22.10]
0.995 [25.27]
1.120 [28.45]
1.370 [34.80]
1.495 [37.97]
0.51 [13.0]
0.51 [13.0]
0.51 [13.0]
0.51 [13.0]
0.51 [13.0]
0.57 [14.5]
16010-02-W
16011-02-W
16012-02-W
16013-02-W
16014-02-W
16015-02-W
3
6
10
19
32
41
Solder Cup
Solder Cup
Solder Cup
Solder Cup
Solder Cup
Solder Cup
-
-
17171-01-KF
17172-01-KF
17173-01-KF
17174-01-KF
17175-01-KF
17176-01-KF
3
6
10
19
32
41
Solder Cup
Solder Cup
Solder Cup
Solder Cup
Solder Cup
Solder Cup
-
-
17148-01-CF
17343-01-CF
17149-01-CF
17787-01-CF
17697-01-CF
17156-01-CF
DIMENSIONS
ISO FLANGE
NW25KF
NW40KF
NW40KF
NW40KF
NW40KF
NW50KF
CONFLAT FLANGE
2 3/4” (NW35CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
3 3/8” (NW50CF)
VOLTAGE
DC
CONDUCTOR
AMPS
NO.
CONTACTS
Air Side
Air Side
Air Side
Air Side
Air Side
Air Side
1 kV
1 kV
1 kV
1 kV
1 kV
1 kV
1
1
1
1
1
1
3
6
10
19
32
41
DIMENSIONS
H
L
0.8 [20]
1.0 [25]
1.0 [25]
1.2 [31]
1.4 [36]
1.5 [38]
1.9 [48]
1.9 [48]
1.9 [48]
1.9 [48]
2.1 [53]
2.3 [58]
PART
NUMBER
16060-01-A
16060-02-A
16060-03-A
16060-04-A
16060-05-A
16060-06-A
Note that contacts are included with all plugs. See the Accessories section for more information on all accessories.
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
Technical Reference
TYPE
Accessories
NO.
PINS
Pressure
Air Side Plug
PART
NUMBER
Viewport
Solder Cup
ConFlat
B
DIMENSIONS
Isolator
Solder Cup
ISO KF
A
Thermocouple
Solder Cup
Weldable
INSTALLATION
Coaxial
Straight Pin
ConFlat
PIN TYPE
Multipin Connector
Straight Pin
ISO KF
NO.
PINS
Feedthrough
Straight Pin
Weldable
B.2
59
Thermocouple
Coaxial
Multipin Connector
Feedthrough
B.2
Circular: Double Ended
MIL-C-26482
MULTIPIN CONNECTOR
Specifications
Double Ended
Materials
Weldable
Shell: Stainless steel
Pins: 300 Series Stainless steel (Gold plated)
Insulation: Glass-ceramic
Magnetic Materials: No
Voltage Rating 1 kV DC
Current Rating 5 Amps per pin
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
Pressure @ 20°C ISO KF 0 PSIG
3 Pin - 550 PSIG (38 Bar)
6 Pin - 500 PSIG (34 Bar)
10 Pin - 450 PSIG (31 Bar)
19 Pin - 400 PSIG (28 Bar)
32 Pin - 375 PSIG (26 Bar)
41 Pin - 350 PSIG (24 Bar)
Vacuum Side Plug Specifications
Materials
ISO KF
Shell: 304 Stainless steel
Crimp Contacts: Copper alloy (Gold plated)
Insulation: PEEK (polyether ether ketone)
Magnetic Materials: No
Current Rating 5 Amps per pin
Temperature Range -269°C to 200°C
Viewport
Isolator
Voltage Rating 1 kV DC
Technical Reference
Accessories
Pressure
ConFlat
60
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
Circular: Double Ended
MIL-C-26482
MULTIPIN CONNECTOR
A
B
PART
NUMBER
3
6
10
19
32
41
Weld
Weld
Weld
Weld
Weld
Weld
0.745 [18.92]
0.870 [22.10]
0.995 [25.27]
1.120 [28.45]
1.370 [34.80]
1.495 [37.97]
0.51 [13.0]
0.51 [13.0]
0.51 [13.0]
0.51 [13.0]
0.51 [13.0]
0.57 [14.5]
16000-02-W
16001-02-W
16002-02-W
16003-02-W
16004-02-W
16005-02-W
-
-
17180-01-KF
17181-01-KF
17182-01-KF
18900-01-KF
18901-01-KF
18902-01-KF
-
-
18903-01-CF
18904-01-CF
18905-01-CF
18906-01-CF
18907-01-CF
18908-01-CF
DIMENSIONS
ISO FLANGE
3
6
10
19
32
41
NW25KF
NW40KF
NW40KF
NW40KF
NW40KF
NW50KF
Coaxial
INSTALLATION
Multipin Connector
ISO KF
NO.
PINS
Feedthrough
Weldable
B.2
CONFLAT FLANGE
ConFlat
VOLTAGE
DC
Air Side
Air Side
Air Side
Air Side
Air Side
Air Side
1 kV
1 kV
1 kV
1 kV
1 kV
1 kV
TYPE
1
1
1
1
1
1
NO.
CONTACTS
3
6
10
19
32
41
VOLTAGE
DC
CONDUCTOR
AMPS
NO.
CONTACTS
1 kV
1 kV
1 kV
1 kV
1 kV
1 kV
5
5
5
5
5
5
3
6
10
19
32
41
DIMENSIONS
H
L
0.8 [20]
1.0 [25]
1.0 [25]
1.2 [31]
1.4 [36]
1.5 [38]
1.9 [48]
1.9 [48]
1.9 [48]
1.9 [48]
2.1 [53]
2.3 [58]
DIMENSIONS
H
L
0.8 [19]
0.9 [22]
1.0 [25]
1.1 [28]
1.4 [34]
1.5 [37]
1.0 [25]
1.0 [25]
1.0 [25]
1.0 [25]
1.0 [25]
1.0 [25]
PART
NUMBER
16060-01-A
16060-02-A
16060-03-A
16060-04-A
16060-05-A
16060-06-A
PART
NUMBER
16026-02-A
16027-02-A
16028-02-A
16029-02-A
16030-02-A
16031-02-A
Pressure
Vacuum Side
Vacuum Side
Vacuum Side
Vacuum Side
Vacuum Side
Vacuum Side
CONDUCTOR
AMPS
Viewport
TYPE
Isolator
Vacuum Side Plug
2 3/4” (NW35CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
3 3/8” (NW50CF)
Thermocouple
Air Side Plug
3
6
10
19
32
41
Note that contacts are included with all plugs. See the Accessories section for more information on all accessories.
Accessories
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
61
Feedthrough
B.3
Circular: Single Ended
MIL-C-5015
MULTIPIN CONNECTOR
4, 6, & 10 Pin
20 & 35 Pin
Weldable
Weldable
ØA
C Weld Lip
304 Stn. Stl.
Multipin Connector
Ceramic Spacer
Ø.062
[1.6]
20 Pin
Ø1.500±.002
[38.10]
Alumel
Conductors
B
5.3 [134]
Coaxial
35 Pin
ISO KF
ISO KF - NW16KF
NW40KF
ØA
Ceramic Spacer
Ø.062
[1.6]
Thermocouple
20 Pin
Ø2.16
[55]
Alumel
Conductors
B
5.3 [134]
Isolator
35 Pin
ConFlat
ConFlat - NW16CF
NW35CF
ØA
Ø.062
[1.6]
20 Pin
Viewport
Ceramic
Spacer
Ø2.73
[69]
.50 [13]
Alumel
Conductors
B
5.3 [134]
Specifications
Materials
Shell: 304 Stainless steel
Pins: Alumel
Insulation: Alumina ceramic
Magnetic Materials: Yes
Accessories
Pressure
35 Pin
ConFlat - NW35CF
Voltage Rating 700 V DC
Current Rating 7 Amps per pin
Technical Reference
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
62
Pressure @ 20°C ISO KF 0 PSIG
4 Pin - 600 PSIG (41 Bar)
6 Pin - 550 PSIG (38 Bar)
10 Pin - 500 PSIG (34 Bar)
USA: (800) 752-7325
www2.ceramtec.com
20 Pin - 125 PSIG (8.6 Bar)
35 Pin - 50 PSIG (3.4 Bar)
sales@ceramtec.com
Circular: Single Ended
MIL-C-5015
MULTIPIN CONNECTOR
INSTALLATION
A
DIMENSIONS
B
C
PART
NUMBER
4
6
10
20
Weld
Weld
Weld
Weld
-
-
-
10184-05-W
10185-05-W
10094-05-W
1.8 [44]
35
Weld
2.3 [57]
2.3 [57]
3.1 [79]
.065 [1.7]
.060 [1.5]
10096-04-W
10186-04-W
1.8 [44]
2.3 [57]
2.3 [57]
3.2 [82]
-
17150-02-KF
17151-02-KF
17155-04-KF
13744-02-KF
15103-02-KF
1.8 [44]
2.3 [57]
2.4 [60]
3.3 [84]
-
10184-06-CF
10184-07-CF
10185-06-CF
10185-07-CF
10094-06-CF
10094-09-CF
10096-03-CF
10186-03-CF
ISO FLANGE
4
6
10
20
35
NW16KF
NW16KF
NW16KF
NW40KF
NW40KF
Coaxial
CONFLAT FLANGE
ConFlat
1 1/3” (NW16CF)
2 3/4” (NW35CF)
1 1/3” (NW16CF)
2 3/4” (NW35CF)
1 1/3” (NW16CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
CONDUCTOR
AMPS
NO.
CONTACTS
700 V
700 V
700 V
700 V
700 V
700 V
700 V
700 V
13
13
13
13
13
4.8
4.8
4.8
4
6
10
20
35
4
6
10
DIMENSIONS
H
L
1.4 [36]
1.4 [36]
1.4 [36]
1.9 [49]
2.5 [62]
1.4 [36]
1.4 [36]
1.4 [36]
TEMPERATURE ˚C
MIN
MAX
4.4 [112]
4.4 [112]
4.4 [112]
4.3 [109]
4.2 [107]
2.6 [65]
2.6 [65]
2.6 [65]
-55
-55
-55
-55
-55
-55
-55
-55
125
125
125
125
125
260
260
260
PART
NUMBER
15910-01-A
15911-01-A
15912-01-A
15913-01-A
15914-01-A
15910-32-A
15911-32-A
15912-32-A
Viewport
Air Side
Air Side
Air Side
Air Side
Air Side
Air Side: Hi-Temp PEEK
Air Side: Hi-Temp PEEK
Air Side: Hi-Temp PEEK
VOLTAGE
DC
Isolator
TYPE
Thermocouple
Air Side Plug
4
4
6
6
10
10
20
35
Multipin Connector
ISO KF
NO.
PINS
Feedthrough
Weldable
B.3
Note that contacts are included with all plugs.
In-Vacuum Cable
Kapton
VOLTAGE
DC
DIAMETER
INSULATION
DIAMETER
PART
NUMBER
2.5
5
28 AWG Stranded
22 AWG Stranded
30’
30’
7 x 0.005
19 x 0.0063
Ø .028
Ø .035
21621-01-A
21643-01-A
TYPE
0.062 Crimp Contacts
MATERIAL
DESCRIPTION
PART
NUMBER
Beryllium Copper
Accepts .062 [1.6] Pin
2044-02-A†
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
Technical Reference
0.062 Crimp Contacts
Nickel Alloy
Accepts .062 [1.6] Pin
0821-01-A
0.062 Barrel Type Contacts
Beryllium Copper
Accepts .062 [1.6] Pin
7332-03-A
Crimp Tool
For 0.025” – 0.075” Crimp Diameters
2840-05
*Contacts priced and sold in packages of 10. †Shown in photo. See the Accessories section for more information on all accessories.
Accessories
Contacts
LENGTH
Pressure
850 V
850 V
WIRE
TYPE
CONDUCTOR
AMPS
63
Circular: Single Ended
Power: MIL-C-5015
MULTIPIN CONNECTOR
∅ .094 Conductor
Specifications
Materials
Weldable
Shell: 304 Stainless steel
Pins: Nickel or Molybdenum
Insulation: Alumina ceramic
Magnetic Materials: See table
Voltage Rating 700 V DC
Current Rating See table
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
Pressure @ 20°C 475 PSIG (33 Bar), ISO KF 0 PSIG
ISO KF
Thermocouple
Coaxial
Multipin Connector
Feedthrough
B.4
Viewport
Isolator
ConFlat - NW16CF
Technical Reference
Accessories
Pressure
ConFlat - NW35CF
64
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
Circular: Single Ended
Power: MIL-C-5015
MULTIPIN CONNECTOR
NO.
PINS
CONDUCTORS
AMPS
MATERIAL
MAGNETIC
MATERIALS
PART
NUMBER
Weld
Weld
Weld
Weld
Yes
No
Yes
No
18093-02-W
18093-04-W
18093-06-W
18093-08-W
Yes
No
Yes
No
18094-02-KF
18094-04-KF
18094-06-KF
18094-08-KF
Yes
No
Yes
No
Yes
No
Yes
No
18095-02-CF
18095-04-CF
18096-02-CF
18096-04-CF
18095-06-CF
18095-08-CF
18096-06-CF
18096-08-CF
Nickel
Molybdenum
Nickel
Molybdenum
2
2
4
4
16
28
16
28
Nickel
Molybdenum
Nickel
Molybdenum
2
2
2
2
4
4
4
4
16
28
16
28
16
28
16
28
Nickel
Molybdenum
Nickel
Molybdenum
Nickel
Molybdenum
Nickel
Molybdenum
TYPE
VOLTAGE
DC
CONDUCTOR
AMPS
NO.
CONTACTS
Air Side
Air Side
700 V
700 V
23
23
2
4
ISO FLANGE
ISO KF
NW16KF
NW16KF
NW16KF
NW16KF
Coaxial
CONFLAT FLANGE
ConFlat
Air Side Plug
1 1/3” (NW16CF)
1 1/3” (NW16CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
1 1/3” (NW16CF)
1 1/3” (NW16CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
PART
NUMBER
DIMENSIONS
L
H
2.5 [63]
2.6 [65]
1.2 [32]
1.4 [36]
18600-01-A
18600-02-A
Isolator
16
28
16
28
Thermocouple
2
2
4
4
Multipin Connector
INSTALLATION
Feedthrough
Weldable
B.4
Note that contacts are included with all plugs.
VOLTAGE
DC
850 V
LENGTH
DIAMETER
INSULATION
DIAMETER
PART
NUMBER
12 AWG Stranded
15’
37 x 0.013
Ø .101
21702-02-A
TYPE
MATERIAL
DESCRIPTION
PART
NUMBER
0.094 Barrel Type
Beryllium Copper
Accepts .094 [2.4] Pin
7332-04-A†
0.094 Set Screw Type
Beryllium Copper
Accepts .094 [2.4] Pin
7429-01-A
Accessories
*Contacts priced and sold in packages of 10. †Shown in photo. See the Accessories section for more information
on all accessories.
Pressure
Contacts
20
WIRE
TYPE
CONDUCTOR
AMPS
Viewport
In Vacuum Cable
Kapton
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
65
Multipin Connector
Feedthrough
B.4
Circular: Single Ended
Power: MIL-C-5015
MULTIPIN CONNECTOR
∅ .142 Conductor
Specifications
Materials
Weldable
Shell: 304 Stainless steel
Pins: Nickel or molybdenum
Insulation: Alumina ceramic
Magnetic Materials: See table
Voltage Rating 700 V DC
Current Rating See table
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
Pressure @ 20°C ISO KF 0 PSIG
Coaxial
2 Pin - 600 PSIG (41 Bar)
4 Pin - 500 PSIG (34 Bar)
Isolator
Thermocouple
ISO KF
Technical Reference
Accessories
Pressure
Viewport
ConFlat
66
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
Circular: Single Ended
Power: MIL-C-5015
MULTIPIN CONNECTOR
NO.
PINS
CONDUCTORS
AMPS
MATERIAL
Nickel
Molybdenum
Nickel
Molybdenum
2
2
4
4
25
46
25
46
Nickel
Molybdenum
Nickel
Molybdenum
2
2
4
4
25
46
25
46
Nickel
Molybdenum
Nickel
Molybdenum
PART
NUMBER
Weld
Weld
Weld
Weld
Yes
No
Yes
No
18097-02-W
18097-04-W
18097-06-W
18097-08-W
Yes
No
Yes
No
18098-02-KF
18098-04-KF
18098-06-KF
18098-08-KF
Yes
No
Yes
No
18099-02-CF
18099-04-CF
18099-06-CF
18099-08-CF
ISO FLANGE
ISO KF
NW40KF
NW40KF
NW40KF
NW40KF
Coaxial
CONFLAT FLANGE
ConFlat
Air Side Plug
2 3/4” (NW35CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
VOLTAGE
DC
CONDUCTOR
AMPS
NO.
CONTACTS
Air Side
Air Side
700 V
700 V
46
46
2
4
PART
NUMBER
DIMENSIONS
L
H
2.5 [63]
2.6 [65]
1.2 [32]
1.4 [36]
18601-01-A
18601-02-A
Isolator
TYPE
Thermocouple
25
46
25
46
MAGNETIC
MATERIALS
Multipin Connector
2
2
4
4
INSTALLATION
Feedthrough
Weldable
B.4
Note that contacts are included with all plugs.
VOLTAGE
DC
850 V
LENGTH
DIAMETER
INSULATION
DIAMETER
PART
NUMBER
12 AWG Stranded
15’
37 x 0.013
Ø .101
21702-02-A
TYPE
MATERIAL
DESCRIPTION
PART
NUMBER
0.154 Barrel Type
Beryllium Copper
Accepts 0.154 [3.9] Pin
7332-07-A
Accessories
*Contacts priced and sold in packages of 10. See the Accessories section for more information on all accessories.
Pressure
Contacts
20
WIRE
TYPE
CONDUCTOR
AMPS
Viewport
In Vacuum Cable
Kapton
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
67
MULTIPIN CONNECTOR
High Voltage
2 and 4 Pin
7 Pin
Weldable
Weldable
Multipin Connector
Feedthrough
B.5
Thermocouple
Coaxial
ISO KF
ISO KF
Viewport
Isolator
ConFlat
Materials
Shell: 304 Stainless steel
Pins: Molybdenum (Nickel plated)
Insulation: Alumina ceramic
Magnetic Materials: Yes
Voltage Rating 12 kV DC (pin/pin and pin/shell)*
Accessories
Pressure
Specifications
ConFlat
Current Rating 13 Amps per pin
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
Pressure @ 20°C ISO KF 0 PSIG
Technical Reference
2 Pin - 400 PSIG (28 Bar)
4 Pin - 300 PSIG (20 Bar)
7 Pin - 200 PSIG (14 Bar)
68
*When used with air side assembly
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
MULTIPIN CONNECTOR
NO.
PINS
INSTALLATION
PART
NUMBER
2
4
7
Weld
Weld
Weld
12475-03-W
12475-04-W
12867-06-W
ISO KF
NW40KF
NW40KF
NW40KF
17157-02-KF
17158-02-KF
17159-02-KF
Coaxial
CONFLAT FLANGE
ConFlat
Air Side Plug
2 3/4” (NW35CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
12476-03-CF
12476-04-CF
12867-07-CF
VOLTAGE
DC
CONDUCTOR
AMPS
NO.
CONTACTS
Air Side
Air Side
Air Side
12 kV
12 kV
12 kV
13
13
13
2
4
7
DIMENSIONS
H
L
1.3 [33]
1.3 [33]
1.4 [37]
PART
NUMBER
1.6 [41]
1.6 [41]
3.3 [84]
2871-02-A
2871-03-A
2871-01-A
DESCRIPTION
PART
NUMBER
Isolator
TYPE
Thermocouple
2
4
7
Multipin Connector
ISO FLANGE
2
4
7
Feedthrough
Weldable
B.5
High Voltage
Note that contacts are included with all plugs.
TYPE
MATERIAL
Pressure
0.062 Crimp Type Contacts
Beryllium Copper
Accepts .050 [1.3] Pin
11911-02-X†
0.062 Set Screw Type Contacts
Beryllium Copper
Accepts .062 [1.6] Pin
7429-02-A
0.062 Barrel Type Contacts
Beryllium Copper
Accepts .062 [1.6] Pin
7332-02-A
Crimp Tool
For 0.025” – 0.075” Crimp Diameters
2840-05
*Contacts priced and sold in packages of 10. †Shown in photo. See the Accessories section for more information
on all accessories.
Viewport
Contacts
Accessories
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
69
MULTIPIN CONNECTOR
Baseplate
MIL-C-5015 Type
Octal Connector
Installation: 1” Bolt
Installation: 1” Bolt
MIL-C-5015 Type Specifications
Octal Connector Specifications
Materials
Materials
Bolt: 304 Stainless steel
Pins: Alumel
Insulation: Glass-ceramic
Magnetic Materials: Yes
Bolt: 304 Stainless steel
Pins: Alumel
Insulation: Alumina ceramic
Magnetic Materials: Yes
Voltage Rating 700 V DC
Voltage Rating 350 V DC
Current Rating 7 Amps per pin
Current Rating 7 Amps per pin
Temperature Range -25°C to 205°C
Temperature Range -25°C to 205°C
Pressure @ 20˚C 200 PSIG (14 Bar)
Pressure @ 20˚C 200 PSIG (14 Bar)
Technical Reference
Accessories
Pressure
Viewport
Isolator
Thermocouple
Coaxial
Multipin Connector
Feedthrough
B.6
70
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
MULTIPIN CONNECTOR
INSTALLATION
PART
NUMBER
10
1” Bolt
15717-01-A
8
1” Bolt
15730-01-A
Multipin Connector
Octal Connector
1” Bolt
NO.
PINS
Feedthrough
MIL-C-5015 Type
1” Bolt
B.6
Baseplate
Coaxial
Air Side Plug
VOLTAGE
DC
CONDUCTOR
AMPS
NO.
CONTACTS
Air Side
700 V
13
10
MATERIAL
TYPE
Beryllium Copper
Nickel Alloy
1.4 [36]
4.4 [112]
PART
NUMBER
15912-01-A
DESCRIPTION
PART
NUMBER
Accepts wire up to 0.050 [1.3]
Accepts wire up to 0.062 [1.6]
For 0.025” – 0.075” Crimp Diameters
2044-02-A†
0821-01-A
2840-05
Isolator
0.062 Crimp Contacts
0.062 Crimp Contacts
Crimp Tool
DIMENSIONS
H
L
Thermocouple
Contacts
TYPE
*Contacts priced and sold in packages of 10. †Shown in photo. See the Accessories section for more information
on all accessories.
Viewport
Pressure
Accessories
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
71

Similar documents

A.2 - Neyco

A.2 - Neyco Adjustable wire stripper, 20-30 AWG (.25-.80mm)

More information

COAXIAL - CeramTec

COAXIAL - CeramTec 1 1/3” (NW16CF) 2 3/4” (NW35CF) 2 3/4” (NW35CF) 2 3/4” (NW35CF)

More information

VACUUM COMPONENTS

VACUUM COMPONENTS Noise level(without gas ballast)

More information

Chapter PDF, 3.3 MB

Chapter PDF, 3.3 MB • Furnaces • Power generation measurement and control • Aerospace equipment • In-vacuum coating • Semiconductor processing equipment • Energy research • Industrial equipment

More information