COAXIAL - CeramTec

Viewport
Isolator
Thermocouple
Coaxial
Multipin Connector
Feedthrough
C.0
COAXIAL
Introduction
Description
CeramTec coaxial connectors
consist of two concentric conductors: a central conductor surrounded by and insulated from a second
tubular conductor. The outside
conductor is usually at ground
potential but in some product variations may be floated off ground
by employing an additional insulating ring. The outer conducting surface can prevent radio frequency
noise from passing to or from the
central conductor. CeramTec’s
Ceramaseal® product line includes a
complete line of industry-standard
coaxial connectors ranging from
Microdot through SHV. These coaxial connectors are manufactured for
high and ultra-high vacuum service.
Microdot connectors are the smallest standard threaded interface
connectors we offer for use in
Ultra-High Vacuum (UHV).
CeramTec’s standard Microdot connectors are available as single
ended or double ended units.
SMA (Subminiature Type-A)
connectors offer a threaded
interface in a subminiature size.
Matched impedance designs are
also available and are ideally suited
for high frequency signal transmission above 10 GHz. CeramTec’s
standard SMA connectors are available as single ended or double
ended units.
Technical Reference
Accessories
Pressure
SMB (Subminiature Type-B)
74
connectors are designed for quick
connecting and disconnecting.
This is made possible by the SMB’s
spring retention connector.
CeramTec’s standard SMB connectors are single ended and available
with a grounded shield or a floating shield configuration.
BNC connectors are the most popular miniature-sized connector and
can accommodate up to 500 V DC.
The BNC is characterized by its
quick connect/disconnect bayonet
coupling. Matched impedance
designs are also available and are
ideally suited for high frequency
signal transmission. CeramTec’s
standard BNC connectors are available as single or double ended
units with a grounded shield or a
floating shield.
MHV (Miniature High Voltage)
connectors are designed for highvoltage applications of BNC connectors (DC voltage between 500 V
and 5 kV). MHV connectors are
sometimes referred to as “highvoltage BNCs.” CeramTec’s standard
MHV connectors are available as
single ended or double ended units
with a floating shield or a grounded shield.
Standard Specifications
• Grounded and floating shield
versions
• High frequency 50 ohm impedance matched connectors
• Connectors sold with or without
air side plugs
Typical Coaxial Construction
Conductor
Washer
Cap
Insulator
Type N series connectors are the
most popular medium-sized connectors, accommodating voltages
up to 1.5 kV. The threaded coupling provides low noise and
increases resistance to shock and
vibration. Matched impedance
designs are also available and are
ideally suited for high frequency
signal transmission above 6 GHz.
CeramTec’s standard Type N connectors are available as single or double ended units.
HN series connectors are Type N
series connectors that have been
designed to take higher voltages
(up to 7 kV). These matched impedance designs are ideally suited for
high frequency signal transmission
or fast rise time pulses for data
transmission.
USA: (800) 752-7325
www2.ceramtec.com
Flange
Flange
Tube
Adapter
sales@ceramtec.com
COAXIAL
C.0
Introduction
S TA N D A R D S P E C I F I C AT I O N S
Category
Subminiature
Miniature
MediumSized
Cable
Microdot®
1000V
Threaded
2
.08 dia. 50-ohm
SMB
(Subminiature-B)
375V
Push-on
1.4
RG-174/U
SMA
(Subminiature-A)
500V
Threaded
0.8 - 1.8
RG-58/U
BNC
500V
Bayonet
3.6 - 4.4
RG-58/U
MHV
(Min. High-Voltage)
5000V
Bayonet
3.6
RG-59/U
SHV-5KV
(Safe High-Voltage)
5000V
Bayonet
10
RG-59/U
SHV-10KV
(Safe High-Voltage)
10,000V
Bayonet
2.2 - 10
RG-58/U
SHV-20KV
(Safe High-Voltage)
20,000V
Bayonet
16.5
RG-213/U
BSHV
(Bakeable Safe
High-Voltage)
7500V
Threaded
8
RG-59/U
N
1500V
Threaded
0.8 - 5
RG-8/U
RG-9/U
RG-10/U
HN
7000V
Threaded
7
RG-8/U
RG-9/U
RG-87/U
RG-213/U
RG-214/U
RG-225/U
Isolator
Current
(amps)
Thermocouple
• Multiple coaxial and multipin
connectors in a flange
• Double ended 50 ohm coaxial
connector with floating shield for
a cryogenic application
• Coaxial connectors using a glassceramic seal for cryogenic and
corrosive environments
• LC connector, TNC connector and
other military style coaxial
connectors
Coupling
Coaxial
Extreme / Custom Design
DC Voltage
Classification
Multipin Connector
connectors feature an improved
interface over the MHV. The SHV
outer contact ground connection is
maintained through the center contact mating cycle. The center contact
is recessed to prevent shock hazard
when disengaged. Four designs are
included in this Product Guide covering DC voltages from 5 kV to as high
as 20 kV. The BSHV version is a bakeable SHV connector that exhibits the
safety level of the SHV. CeramTec’s
standard SHV connectors are single
ended and available with a grounded
shield or a floating shield (SHV 5 kV)
configuration.
Feedthrough
SHV (Safe High Voltage)
Installation
High Frequency
50 Ohm Designs
•
•
•
•
SMA
BNC
Type N
HN
www2.ceramtec.com
Technical Reference
sales@ceramtec.com
• Floating SMA connector
• BNC to Microdot connector
• New 50 Ohm BNC connector design
Accessories
A few of the many applications in
which these coaxial connectors are
commonly used are:
• Telecommunications
• Semiconductor processing
equipment
• Aerospace equipment
• Medical equipment
New Products
Pressure
Applications
• Microwave
• In-vacuum coating
• Particle accelerators
Viewport
Standard installation mountings
include:
• Weld (Pulse-TIG, TIG, Laser,
E-Beam)
• ISO KF flange
• ConFlat flange
• NPT fitting (see Pressure
section)
TEL: (864) 682-3215
75
COAXIAL
VSWR vs. Frequency Charts
VSWR vs. Frequency Charts
SMA
BNC
Multipin Connector
Feedthrough
C.0
R
W
VS
M
XI
MA
UM
Coaxial
Typical VSWR
Type N-SMA
Technical Reference
Accessories
Pressure
Viewport
Isolator
Thermocouple
Type N
76
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
COAXIAL
SMA
C.3
86-93
to 3.6 Amps
50 Ohm & Non-Constant
BNC
C.4
94-103
5 kV
3.6 Amps
Non-Constant
MHV
C.5
104-111
1.5 kV
to 5 Amps
50 Ohm & Non-Constant
Type N
C.6
112-115
7 kV
7 Amps
50 Ohm
HN
C.7
116-117
5 kV
10 Amps
Non-Constant
SHV 5 KV
C.8
118-123
7.5 kV
8 Amps
Non-Constant
BSHV 7.5 KV
C.9
124-125
10 kV
to 10 Amps
Non-Constant
SHV 10 KV
C.10
126-129
20 kV
16.5 Amps
Non-Constant
SHV 20 KV
C.11
130-131
1.5 kV
0.8 Amps
50 Ohm & Non-Constant
Between Series
C.12
132-135
to 1.8 Amps
500 V
Accessories
50 Ohm & Non-Constant
500 V
Non-Constant
Pressure
C.2
82-85
1.4 Amps
Viewport
SMB
375 V
Non-Constant
Isolator
C.1
78-81
2 Amps
Thermocouple
Microdot
1 kV
Impedance Rating
Coaxial
Section
Pages
Current
Multipin Connector
Sub-section
Voltage
DC
Feedthrough
Type
C.0
Table of Contents
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
77
Microdot
Low Frequency / Single Ended - Grounded Shield
COAXIAL
ISO KF - NW40KF
Weldable
Coaxial
Multipin Connector
Feedthrough
C.1
Ø.50
[13]
Ø.50
[13]
Ø.15
[13]
NW40KF
Molybdenum
Conductor
Ø.042
[1.1]
Ø2.16
[55]
ISO KF - NW16KF
.25 [6.3]
.23 [5.7]
NW16KF
Isolator
Thermocouple
Molybdenum
Conductor
ConFlat - NW35CF
Ø.042
[1.1]
Ø1.18
[30]
Ø.50
[13]
Ø.50
[13]
Ø.50
[13]
.25 [6.4]
NW35CF
.23 [5.7]
Molybdenum
Conductor
Viewport
Ø.042
[1.1]
Ø2.73
[69]
ConFlat - NW16CF
Pressure
NW16CF
Molybdenum
Conductor
.50 [13]
.28 [7.1]
Ø.042 [1.1]
Ø1.33
[34]
Accessories
Technical Reference
Materials
Housing: Kovar
Pin: Molybdenum
Insulation: Alumina ceramic
Magnetic Materials: Yes
Voltage Rating 1 kV DC
.29 [7.2]
78
Specifications
.28 [7.1]
Current Rating 2 Amps
Temperature Range -55°C to 450°C, ISO KF -25˚C to 205˚C
Pressure @ 20°C See table
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
Microdot
Low Frequency / Single Ended - Grounded Shield
COAXIAL
NO.
PINS
INSTALLATION
1
Weld
PART
NUMBER
PRESSURE @ 20˚C
PSIG
BAR
1600
17614-01-W
-
-
21507-01-KF
21525-01-KF
21526-01-KF
21527-01-KF
1600
1500
1500
1500
110
103
103
103
21505-01-CF
21522-01-CF
21523-01-CF
21524-01-CF
ISO FLANGE
ISO KF
1
2
3
4
NW16KF
NW40KF
NW40KF
NW40KF
Multipin Connector
110
Feedthrough
Weldable
C.1
Coaxial
CONFLAT FLANGE
TYPE
Microdot – Single Ended
VOLTAGE
DC
CONDUCTOR
AMPS
10’
1 kV
2
TEMPERATURE
MIN
MAX
-65˚C
125˚C
PART
NUMBER
14544-01-A
TYPE
MATERIAL
DESCRIPTION
PART
NUMBER
0.042 Crimp Contacts
Crimp Tool
Gold Plated 300 Series Stn. Stl.
Accepts wire up to 0.030 [0.76]
For 0.025” – 0.075” Diameters
14461-04-A
2840-05
Pressure
*Contacts priced and sold in packages of 5. See the Accessories section for more information on all accessories.
Viewport
Contacts
LENGTH
Isolator
Air Side Cable
Assembly
1 1/3” (NW16CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
Thermocouple
ConFlat
1
2
3
4
Accessories
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
79
Microdot
Low Frequency / Double Ended - Grounded Shield
COAXIAL
Weldable
ISO KF - NW40KF
Coaxial
Multipin Connector
Feedthrough
C.1
Ø.90
[23]
Ø.90
[23]
Ø.90
[23]
NW40KF
Ø2.16
[55]
ISO KF - NW16KF
.75 [19]
.34 [8.7]
NW16KF
Thermocouple
ConFlat - NW35CF
Ø1.18
[30]
Isolator
Ø.90
[23]
Ø.90
[23]
Ø.90
[23]
NW35CF
.49 [13]
.60 [15]
Viewport
Ø2.73
[69]
ConFlat - NW16CF
NW16CF
Pressure
.50 [13]
.34 [8.7]
.75 [19]
Ø1.33
[34]
Accessories
Technical Reference
Materials
Housing: 304 Stainless steel
Contact: 304 Stainless steel
Insulation: Alumina ceramic
Magnetic Materials: Yes
.29 [7.2]
80
Specifications
.75 [19]
.34 [8.7]
Voltage Rating 1 kV DC
Current Rating 2 Amps
Temperature Range -55°C to 450°C, ISO KF -25˚C to 205˚C
Pressure @ 20°C See table
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
Microdot
Low Frequency / Double Ended - Grounded Shield
COAXIAL
NO.
PINS
INSTALLATION
1
Weld
PRESSURE @ 20˚C
PSIG
BAR
PART
NUMBER
110
18044-02-W
-
-
21511-01-KF
21517-01-KF
21518-01-KF
21519-01-KF
1600
1500
1500
1500
110
103
103
103
21509-01-CF
21514-01-CF
21515-01-CF
21516-01-CF
ISO FLANGE
ISO KF
1
2
3
4
NW16KF
NW40KF
NW40KF
NW40KF
Coaxial
CONFLAT FLANGE
ConFlat
1 1/3” (NW16CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
Microdot Air Side – Single Ended
TYPE
Microdot Vacuum Side – Double Ended
Microdot Vacuum Side – Double Ended
Microdot Vacuum Side – Double Ended
VOLTAGE
DC
CONDUCTOR
AMPS
10’
1 kV
2
LENGTH
VOLTAGE
DC
CONDUCTOR
AMPS
12”
24’’
36’’
500 V
500 V
500 V
2
2
2
-65˚C
125˚C
TEMPERATURE
MIN
MAX
-65˚C
-65˚C
-65˚C
125˚C
125˚C
125˚C
PART
NUMBER
14544-01-A
PART
NUMBER
15767-12-A
15767-24-A
15767-36-A†
Pressure
†Shown in photo. See the Accessories section for more information on all accessories.
TEMPERATURE
MIN
MAX
Viewport
Vacuum Side Cable
Assembly
LENGTH
Isolator
TYPE
Thermocouple
Air Side Cable
Assembly
1
2
3
4
Multipin Connector
1600
Feedthrough
Weldable
C.1
Accessories
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
81
SMB
Low Frequency / Single Ended - Grounded Shield
COAXIAL
ISO KF - NW40KF
Weldable
Ø.85 [22]
Coaxial
Multipin Connector
Feedthrough
C.2
Ø.85 [22]
416 Stn. Stl.
Conductor
NW40KF
Ø.032
[0.81]
ISO KF - NW16KF
.56 [14]
NW16KF
.27±.06 [6.8]
Thermocouple
416 Stn. Stl.
Conductor
ConFlat - NW35CF
Ø1.18
[30]
Ø.85 [22]
Ø.85 [22]
Ø.85 [22]
Ø.032
[0.81]
Isolator
Viewport
Ø.85 [22]
.57 [14]
.27±.06 [6.8]
NW35CF
416 Stn. Stl.
Conductor
Ø.032
[0.81]
ConFlat - NW16CF
NW16CF
Pressure
416 Stn. Stl.
Conductor
.22±.06 [5.6]
.62 [16]
Ø1.33
[34]
Accessories
Ø.032
[0.81]
Technical Reference
Materials
Housing: Kovar
Pin: 416 Stainless steel
Insulation: Alumina ceramic
Magnetic Materials: Yes
Voltage Rating 500 V DC
Current Rating 1.4 Amps
.29 [7.2]
82
Specifications
.62 [16]
.22±.06 [5.6]
Temperature Range -55°C to 450°C, ISO KF -25°C to 205°C
Pressure @ 20°C See table
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
COAXIAL
NO.
PINS
INSTALLATION
1
Weld
C.2
PART
NUMBER
PRESSURE @ 20˚C
PSIG
BAR
241
0713-02-W
-
-
21371-01-KF
21379-01-KF
21381-01-KF
21383-01-KF
3000
1500
1500
1500
207
103
103
103
21369-01-CF
21373-01-CF
21375-01-CF
21377-01-CF
ISO FLANGE
ISO KF
1
2
3
4
NW16KF
NW40KF
NW40KF
NW40KF
Coaxial
CONFLAT FLANGE
ConFlat
TYPE
VOLTAGE
DC
CONDUCTOR
AMPS
Air Side
375 V
5
50 Ohm SMB – Double Ended
TYPE
0.032 Crimp Contacts
Crimp Tool
0.71 [18]
LENGTH
VOLTAGE
DC
CONDUCTOR
AMPS
10’
500 V
2
SMB Plug
TEMPERATURE
MIN
MAX
-70
200
MATERIAL
DESCRIPTION
Beryllium Copper
Accepts wire up to 0.032 [0.81]
For 0.025” – 0.075” Diameters
PART
NUMBER
3095-12
PART
NUMBER
21618-01-A
PART
NUMBER
Pressure
Contacts
0.25 [6.4]
DESCRIPTION
Viewport
TYPE
DIMENSIONS
H
L
Isolator
Air Side Cable
Assembly
1 1/3” (NW16CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
Thermocouple
Air Side Plug
1
2
3
4
Multipin Connector
3500
Feedthrough
Weldable
SMB
Low Frequency / Single Ended - Grounded Shield
11288-02-X
2840-05
Accessories
*Contacts priced and sold in packages of 10. See the Accessories section for more information on all accessories.
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
83
SMB
Low Frequency / Single Ended - Floating Shield
COAXIAL
ISO KF - NW40KF
Weldable
Ø.90 [23]
Multipin Connector
Feedthrough
C.2
Ø.90 [23]
Ø.90 [23]
Ø.032
[0.81]
Ø2.16
[55]
Coaxial
416 Stn. Stl.
Conductor
.23±.06 [5.8]
.61 [15]
ISO KF - NW16KF
Thermocouple
ConFlat - NW35CF
Ø.90 [23]
Ø.90 [23]
Ø.90 [23]
416 Stn. Stl.
Conductor
Ø1.18
[30]
Isolator
Ø.032
[0.81]
NW35CF
Viewport
.61 [15]
Ø.032
[0.81]
.23±06 [5.8]
416 Stn. Stl.
Conductor
ConFlat - NW16CF
Ø2.73
[69]
.28±.06 [7.2]
.29 [7.2]
.50 [12.7]
Pressure
.55 [14]
416 Stn. Stl.
Conductor
Specifications
Technical Reference
Accessories
Ø1.33
[34]
84
Ø.032
[0.81]
Materials
Housing: 52 Nickel Iron
Pin: 416 Stainless steel
Insulation: Alumina ceramic
Magnetic Materials: Yes
Voltage Rating Pin/Shield: 500 V DC, Shield/Grd: 1 kV DC
Current Rating 1.4 Amps
.55 [14]
.28±.06 [7.2]
Temperature Range -55°C to 450°C, ISO KF -25°C to 205°C
Pressure @ 20°C 500 PSIG (35 Bar), ISO KF 0 PSIG
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
SMB
Low Frequency / Single Ended - Floating Shield
COAXIAL
NO.
PINS
INSTALLATION
PART
NUMBER
1
Weld
0714-02-W
ISO KF
NW16KF
NW40KF
NW40KF
NW40KF
21396-01-KF
21403-01-KF
21405-01-KF
21407-01-KF
Coaxial
CONFLAT FLANGE
ConFlat
TYPE
VOLTAGE
DC
CONDUCTOR
AMPS
DIMENSIONS
H
L
DESCRIPTION
PART
NUMBER
Air Side
375 V
5
0.25 [6.4] 0.71 [18]
SMB Plug
3095-12
TEMPERATURE
MIN
MAX
PART
NUMBER
TYPE
LENGTH
VOLTAGE
DC
CONDUCTOR
AMPS
50 Ohm SMB – Double Ended
10’
500 V
2
0.032 Crimp Contacts
Crimp Tool
200
MATERIAL
DESCRIPTION
Beryllium Copper
Accepts wire up to 0.032 [0.81]
For 0.025” – 0.075” Diameters
21618-01-A
PART
NUMBER
Pressure
TYPE
-70
Viewport
Contacts
21394-01-CF
21397-01-CF
21399-01-CF
21401-01-CF
Isolator
Air Side Cable
Assembly
1 1/3” (NW16CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
Thermocouple
Air Side Plug
1
2
3
4
Multipin Connector
ISO FLANGE
1
2
3
4
Feedthrough
Weldable
C.2
11288-02-X
2840-05
Accessories
*Contacts priced and sold in packages of 10. See the Accessories section for more information on all accessories.
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
85
SMA
Low Frequency / Single Ended - Grounded Shield
COAXIAL
ISO KF - NW40KF
Weldable
Multipin Connector
Feedthrough
C.3
Ø.80[20]
NW40KF
Ø.80[20]
Ø.80[20]
304 Stn. Stl.
Conductor
Ø.050 [1.3]
Coaxial
Ø2.16
[55]
.97 [25]
Thermocouple
ISO KF - NW16KF
.25 [6.3]
ConFlat - NW35CF
Isolator
Ø.80[20]
7
Ø.80[20]
Ø.80[20]
304 Stn. Stl.
Conductor
NW35CF
Ø2.73
[69]
ConFlat - NW16CF
Pressure
Viewport
Ø.050 [1.3]
.50 [13]
.30 [7.7]
.92 [23]
Specifications
Materials
Accessories
Housing: 304 Stainless steel
Pin: 304 Stainless steel
Insulation: Alumina ceramic
Magnetic Materials: No
Technical Reference
Voltage Rating 500 V DC
86
Current Rating 1.8 Amps
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
Pressure @ 20°C See table
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
COAXIAL
NO.
PINS
INSTALLATION
1
Weld
PRESSURE @ 20˚C
PSIG
BAR
C.3
PART
NUMBER
276
8071-02-W
-
-
18045-02-KF
21498-01-KF
21499-01-KF
21500-01-KF
3000
1500
1500
1500
207
103
103
103
18046-02-CF
21495-01-CF
21496-01-CF
21497-01-CF
ISO FLANGE
ISO KF
1
2
3
4
NW16KF
NW40KF
NW40KF
NW40KF
Coaxial
CONFLAT FLANGE
ConFlat
CONDUCTOR
AMPS
DIMENSIONS
H
L
DESCRIPTION
Air Side
500 V
5
0.31 [7.9] 0.98 [25]
SMA Plug
6524-02
TEMPERATURE
MIN
MAX
PART
NUMBER
TYPE
LENGTH
VOLTAGE
DC
CONDUCTOR
AMPS
10’
500 V
5
-70
200
21617-01-A
DESCRIPTION
PART
NUMBER
0.050 Crimp Contacts
0.050 Set Screw Type Contacts
0.050 Barrel Type Contacts
Crimp Tool
Beryllium Copper
Beryllium Copper
Beryllium Copper
Accepts wire up to 0.062 [1.6]
Accepts wire up to 0.050 [1.3]
Accepts wire up to 0.050 [1.3]
For 0.025” – 0.075” Diameters
11911-02-X†
7429-02-A
7332-02-A
2840-05
*Contacts priced and sold in packages of 10. †Shown in photo. See the Accessories section for more information
on all accessories.
Accessories
MATERIAL
Pressure
TYPE
Viewport
VOLTAGE
DC
50 Ohm SMA – Double Ended
Contacts
PART
NUMBER
TYPE
Isolator
Air Side Cable
Assembly
1 1/3” (NW16CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
Thermocouple
Air Side Plug
1
2
3
4
Multipin Connector
4000
Feedthrough
Weldable
SMA
Low Frequency / Single Ended - Grounded Shield
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
87
COAXIAL
SMA
50 Ohm - High Frequency / Single Ended - Grounded Shield
Weldable
ISO KF
Multipin Connector
Feedthrough
C.3
Ø.85
[22]
Ø.85
[22]
Ø1.25
[31.8]
Flange
(See Table)
Ø .040 [1.0]
Coaxial
Inconel X-750
Conductor
ISO KF – NW25KF
.41 [10]
Thermocouple
1.0 [26]
Isolator
ConFlat
Ø.85
[22]
Ø.85
[22]
Ø1.5
[ 38]
Viewport
Flange
(See table)
Ø .040 [1.0]
Inconel X-750
Conductor
Pressure
ConFlat – NW16CF
.46 [12]
1.0 [26]
Specifications
Accessories
Materials
Housing: 304 Stainless steel
Pin: Inconel X-750
Contacts: 300 Series Stn. Stl.
Insulation: Glass-ceramic
Magnetic Materials: No
Technical Reference
Voltage Rating 500 V DC
88
Current Rating 1 Amp
Temperature Range -269°C to 350°C, ISO KF -25°C to 205°C
Pressure @ 20°C 1400 PSIG (97 Bar), ISO KF 0 PSIG
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
COAXIAL
SMA
50 Ohm - High Frequency / Single Ended - Grounded Shield
NO.
PINS
INSTALLATION
PART
NUMBER
1
Weld
15310-03-W
18053-02-KF
21356-01-KF
21357-01-KF
21361-01-KF
CONFLAT FLANGE
Air Side Plug
18054-02-CF
21353-01-CF
21358-01-CF
21360-01-CF
TYPE
VOLTAGE
DC
CONDUCTOR
AMPS
Air Side
500 V
5
50 Ohm SMA – Double Ended
0.31 [7.9]
0.98 [25]
LENGTH
VOLTAGE
DC
CONDUCTOR
AMPS
10’
500 V
5
DESCRIPTION
PART
NUMBER
SMA Plug
6524-02
TEMPERATURE
MIN
MAX
-70
200
PART
NUMBER
21617-01-A
Viewport
TYPE
DIMENSIONS
H
L
Isolator
Air Side Cable
Assembly
1 1/3” (NW16CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
4 1/2” (NW63CF)
Thermocouple
Single Ended
ConFlat
1
2
3
4
NW25KF
NW40KF
NW40KF
NW50KF
Coaxial
1
2
3
4
Multipin Connector
ISO FLANGE
Single Ended
ISO KF
Feedthrough
Single Ended
Weldable
C.3
See the Accessories section for more information on all accessories.
Pressure
SMA*
Accessories
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
Technical Reference
*Applies when properly mated to a 50 Ohm load.
89
COAXIAL
ISO KF
Weldable
Coaxial
Ø.85
[22]
Ø.85
[22]
Multipin Connector
Feedthrough
C.3
SMA
50 Ohm - High Frequency / Double Ended - Grounded Shield
Flange
(See Table)
Ø1.25
[32]
.30 [7.5]
.92 [23]
ISO KF – NW25KF
Thermocouple
ConFlat
Ø.85
[22]
Ø.85
[22]
Ø1.5
[38]
Viewport
Isolator
Flange
(See Table)
.35 [8.9]
.92 [23]
ConFlat – NW16CF
Specifications
Pressure
Materials
Housing: 304 Stainless steel
Pin: Inconel X-750
Contacts: 300 Series Stn. Stl.
Insulation: Glass-ceramic
Magnetic Materials: No
Voltage Rating 500 V DC
Accessories
Current Rating 1 Amp
Temperature Range -269°C to 350°C, ISO KF -25°C to 205°C
Technical Reference
Pressure @ 20°C 1400 PSIG (97 Bar), ISO KF 0 PSIG
90
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
COAXIAL
SMA
50 Ohm - High Frequency / Double Ended - Grounded Shield
NO.
PINS
INSTALLATION
PART
NUMBER
1
Weld
15263-03-W
1
2
3
4
18055-02-KF
21365-01-KF
21366-01-KF
21367-01-KF
CONFLAT FLANGE
Air Side Plug
16545-01-CF
21362-01-CF
21363-01-CF
21364-01-CF
VOLTAGE
DC
CONDUCTOR
AMPS
DIMENSIONS
H
L
DESCRIPTION
PART
NUMBER
Air Side
500 V
5
0.31 [7.9] 0.98 [25]
SMA Plug
6524-02
TEMPERATURE
MIN
MAX
PART
NUMBER
TYPE
50 Ohm SMA – Double Ended
LENGTH
VOLTAGE
DC
CONDUCTOR
AMPS
10’
500 V
5
-70
200
21617-01-A
Viewport
TYPE
Isolator
Air Side Cable
Assembly
1 1/3” (NW16CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
4 1/2” (NW63CF)
Thermocouple
Double Ended
ConFlat
NW25KF
NW40KF
NW40KF
NW50KF
Coaxial
Double Ended
ISO KF
Multipin Connector
ISO FLANGE
1
2
3
4
Feedthrough
Double Ended
Weldable
C.3
See the Accessories section for more information on all accessories.
Pressure
SMA
Accessories
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
91
Coaxial
SMA
50 Ohm - High Frequency / Floating Shield
COAXIAL
Single Ended – Floating Shield
Double Ended – Floating Shield
Weldable
Weldable
.40 [10]
.62 [16]
.40 [10]
.40 [10]
.62 [16]
.51 [13]
.27 [6.9]
Ø.15 [3.9]
Ø.040 [1.0]
Ø.970±.002
[24.64]
Multipin Connector
Feedthrough
C.3
.030 [0.76] Wall
304 Stn. Stl.
Ø.970±.002
[24.64]
Inconel X-750
Conductor
.015 [0.38] Weld Lip
52 Nickel Iron
.015 [0.38] Weld lip
52 Nickel Iron
ISO KF
ISO KF
NWKF40
NWKF40
Thermocouple
Inconel
X-750 Conductor
Ø2.16
[55]
Isolator
Ø2.16
[55]
.80 [20]
1.41 [36]
Viewport
.90 [23]
.62 [16]
ConFlat
ConFlat
.50 [13]
.50 [13]
NW35CF
NW35CF
Ø2.73
[69]
Ø2.73
[69]
Technical Reference
Accessories
Pressure
Inconel
X-750 Conductor
92
.86 [22]
.75 [19]
1.41 [36]
1.5 [39]
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
SMA
50 Ohm - High Frequency / Floating Shield
COAXIAL
Weldable
STYLE
INSTALLATION
PART
NUMBER
Single Ended
Double Ended
Weld
Weld
21283-01-W
19604-01-W†
ISO KF
Single Ended
Double Ended
NW40KF
NW40KF
21285-01-KF
21287-01-KF†
ConFlat
2 3/4” (NW35CF)
2 3/4” (NW35CF)
21284-01-CF
21286-01-CF†
TYPE
VOLTAGE
DC
CONDUCTOR
AMPS
DIMENSIONS
H
L
DESCRIPTION
PART
NUMBER
Air Side
500 V
5
0.31 [7.9] 0.98 [25]
SMA Plug
6524-02
Thermocouple
Air Side Plug
Single Ended
Double Ended
Coaxial
CONFLAT FLANGE
Single & Double Ended
Multipin Connector
ISO FLANGE
Single & Double Ended
Feedthrough
Single & Double Ended
C.3
Isolator
Air Side Cable
Assembly
TYPE
Contacts
TYPE
CONDUCTOR
AMPS
10’
500 V
5
-70
200
PART
NUMBER
21617-01-A
DESCRIPTION
PART
NUMBER
Accepts wire up to 0.040 [1.0]
Accepts wire up to 0.050 [1.3]
Accepts wire up to 0.040 [1.0]
For 0.025” – 0.075” Diameters
16167-03-A†
7429-03-A
7332-01-A
2840-05
MATERIAL
Copper Alloy - Gold Flash
Beryllium Copper
Beryllium Copper
TEMPERATURE
MIN
MAX
Specifications
SMA
Materials
Voltage Rating Pin/Shield: 500 V DC, Shield/Gnd: 2.5 kV DC
Current Rating 1 Amp
Temperature Range -269°C to 350°C, ISO KF -25°C to 205°C
Pressure @ 20°C 300 PSIG (20 Bar), ISO KF 0 PSIG
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
Technical Reference
Housing: 52 Nickel Iron Insulation: Glass-ceramic & Alumina ceramic
Pin: Inconel X-750
Magnetic Materials: Yes
Accessories
*Contacts priced and sold in packages of 5. **Contacts priced and sold in packages of 10. †Shown in photo.
See the Accessories section for more information on all accessories.
Pressure
0.040 Crimp Contacts
0.040 Set Screw Type Contacts
0.040 Barrel Type Contacts
Crimp Tool
VOLTAGE
DC
Viewport
50 Ohm SMA – Double Ended
LENGTH
93
COAXIAL
BNC
Low Frequency / Single Ended – Grounded Shield
Weldable
ISO KF - NW40KF
Coaxial
Multipin Connector
Feedthrough
C.4
Thermocouple
ISO KF - NW16KF
Viewport
Isolator
ConFlat - NW35CF
Pressure
ConFlat - NW16CF
Specifications
Materials
Accessories
Housing: 304 Stainless steel
Pin: 304 Stainless steel
Insulation: Alumina ceramic
Magnetic Materials: No
Technical Reference
Voltage Rating 500 V DC
94
Current Rating 3.6 Amps
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
Pressure @ 20°C 1400 PSIG (97 Bar), ISO KF 0 PSIG
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
BNC
Low Frequency / Single Ended – Grounded Shield
COAXIAL
NO.
PINS
INSTALLATION
PART
NUMBER
1
Weld
7007-02-W
NW16KF
NW40KF
NW40KF
NW40KF
NW40KF
Single Ended
ConFlat
1
1
2
3
4
1 1/3” ConFlat (NW16CF)
2 3/4” ConFlat (NW35CF)
2 3/4” ConFlat (NW35CF)
2 3/4” ConFlat (NW35CF)
2 3/4” ConFlat (NW35CF)
17114-01-KF
17114-05-KF
17136-01-KF
17137-01-KF
17138-01-KF
Coaxial
CONFLAT FLANGE
Air Side Plug
TYPE
VOLTAGE
DC
CONDUCTOR
AMPS
Air Side
500 V
5
50 Ohm BNC – Double Ended
TYPE
0.094 Set Screw Type Contacts
0.094 Barrel Type Contacts
1.1 [27]
LENGTH
VOLTAGE
DC
CONDUCTOR
AMPS
10’
500 V
5
PART
NUMBER
BNC Plug
7116-02
TEMPERATURE
MIN
MAX
-40
85
PART
NUMBER
18921-01-A
MATERIAL
DESCRIPTION
PART
NUMBER
Beryllium Copper
Beryllium Copper
Accepts wire up to 0.050 [1.3]
Accepts wire up to 0.094 [2.4]
7429-01-A†
7332-04-A
Accessories
*Contacts priced and sold in packages of 10. †Shown in photo. See the Accessories section for more information
on all accessories.
Pressure
Contacts
0.56 [14]
DESCRIPTION
Viewport
TYPE
DIMENSIONS
H
L
Isolator
Air Side Cable
Assembly
7593-02-CF
7592-02-CF
5822-04-CF
6647-04-CF
7184-05-CF
Thermocouple
1
1
2
3
4
Multipin Connector
ISO FLANGE
Single Ended
ISO KF
Feedthrough
Single Ended
Weldable
C.4
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
95
COAXIAL
Weldable
ISO KF
ISO KF - NW16KF
ConFlat
ConFlat - NW16CF
Specifications
Materials
Housing: 304 Stainless steel
Pin: 304 Stainless steel
Insulation: Alumina ceramic
Magnetic Materials: No
Accessories
Pressure
Viewport
Isolator
Thermocouple
Coaxial
Multipin Connector
Feedthrough
C.4
BNC
Low Frequency / Double Ended – Grounded Shield
Voltage Rating 500 V DC
Current Rating 3.6 Amps
Technical Reference
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
96
Pressure @ 20°C 1400 PSIG (97 Bar), ISO KF 0 PSIG
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
BNC
Low Frequency / Double Ended – Grounded Shield
COAXIAL
NO.
PINS
INSTALLATION
PART
NUMBER
1
Weld
17115-01-W
17116-01-KF
17118-01-KF
17118-05-KF
17122-01-KF
17139-01-KF
Double Ended
ConFlat
1
1
2
3
4
1 1/3” ConFlat (NW16CF)
2 3/4” ConFlat (NW35CF)
2 3/4” ConFlat (NW35CF)
2 3/4” ConFlat (NW35CF)
3 3/8” ConFlat (NW50CF)
CONFLAT FLANGE
Air Side Plug
TYPE
VOLTAGE
DC
CONDUCTOR
AMPS
Air Side
500 V
5
50 Ohm BNC – Double Ended
0.56 [14]
1.1 [28]
LENGTH
VOLTAGE
DC
CONDUCTOR
AMPS
10’
500 V
5
PART
NUMBER
BNC Plug
7116-02
TEMPERATURE
MIN
MAX
PART
NUMBER
-40
85
18921-01-A
Pressure
See the Accessories section for more information on all accessories.
DESCRIPTION
Viewport
TYPE
DIMENSIONS
H
L
Isolator
Air Side Cable
Assembly
17117-01-CF
18604-01-CF
17187-01-CF
17188-01-CF
17189-01-CF
Thermocouple
NW16KF
NW40KF
NW40KF
NW50KF
NW50KF
Coaxial
1
1
2
3
4
Multipin Connector
ISO FLANGE
Double Ended
ISO KF
Feedthrough
Double Ended
Weldable
C.4
Accessories
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
97
BNC
Low Frequency / Single Ended – Floating Shield
COAXIAL
Specifications
Weldable
Materials
Housing: 52 Nickel Iron
Pin: 304 Stainless steel
Insulation: Alumina ceramic
Magnetic Materials: Yes
Voltage Rating Pin/Shield: 500 V DC, Shield/Gnd: 2.5 kV DC
Current Rating 3.6 Amps
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
Pressure @ 20°C 300 PSIG (20 Bar), ISO KF 0 PSIG
Coaxial
Multipin Connector
Feedthrough
C.4
Viewport
Isolator
Thermocouple
ISO KF
Technical Reference
Accessories
Pressure
ConFlat
98
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
BNC
Low Frequency / Single Ended – Floating Shield
COAXIAL
INSTALLATION
PART
NUMBER
Weld
6511-03-W
Single Ended
ISO KF
NW40KF
17177-01-KF
Coaxial
CONFLAT FLANGE
Single Ended
ConFlat
Multipin Connector
ISO FLANGE
Feedthrough
Single Ended
Weldable
C.4
2 3/4” (NW35CF)
17178-01-CF
Thermocouple
Air Side Plug
VOLTAGE
DC
CONDUCTOR
AMPS
Air Side
500 V
5
50 Ohm BNC – Double Ended
TYPE
LENGTH
VOLTAGE
DC
CONDUCTOR
AMPS
10’
500 V
5
MATERIAL
Beryllium Copper
Beryllium Copper
BNC Plug
7116-02
TEMPERATURE
MIN
MAX
-40
85
DESCRIPTION
Accepts wire up to 0.050 [1.3]
Accepts wire up to 0.094 [2.4]
PART
NUMBER
18921-01-A
PART
NUMBER
7429-01-A†
7332-04-A
*Contacts priced and sold in packages of 10. †Shown in photo. See the Accessories section for more information
on all accessories.
Accessories
0.094 Set Screw Type Contacts
0.094 Barrel Type Contacts
1.1 [28]
PART
NUMBER
Pressure
Contacts
0.56 [14]
DESCRIPTION
Viewport
TYPE
DIMENSIONS
H
L
Isolator
Air Side Cable
Assembly
TYPE
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
99
BNC
Low Frequency / Double Ended – Floating Shield
COAXIAL
ISO KF - NW40KF
Weldable
ConFlat - NW35CF
ISO KF - NW16KF
Isolator
Thermocouple
Coaxial
Multipin Connector
Feedthrough
C.4
Viewport
5
Specifications
Pressure
Materials
Housing: 304 Stainless steel
Pin: 304 Stainless steel
Insulation: Alumina ceramic
Magnetic Materials: Yes
ConFlat - NW16CF
Voltage Rating Pin/Shield: 500 V DC, Shield/Gnd: 2.5 kV DC
Current Rating 3.6 Amps
Technical Reference
Accessories
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
100
Pressure @ 20°C 400 PSIG (28 Bar), ISO KF 0 PSIG
25
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
COAXIAL
C.4
INSTALLATION
PART
NUMBER
Weld
17190-01-W
NW16KF
NW40KF
17191-01-KF
17191-05-KF
Coaxial
CONFLAT FLANGE
Double Ended
ConFlat
Multipin Connector
ISO FLANGE
Double Ended
ISO KF
Feedthrough
Double Ended
Weldable
BNC
Low Frequency / Double Ended – Floating Shield
1 1/3” (NW16CF)
2 3/4” (NW35CF)
17192-01-CF
17193-01-CF
Thermocouple
Air Side Cable
Assembly
TYPE
CONDUCTOR
AMPS
10’
500 V
5
TYPE
VOLTAGE
DC
CONDUCTOR
AMPS
Air Side
500 V
5
DIMENSIONS
H
L
0.56 [14]
1.1 [28]
-40
85
PART
NUMBER
18921-01-A
DESCRIPTION
PART
NUMBER
BNC Plug
7116-02
Pressure
See the Accessories section for more information on all accessories.
TEMPERATURE
MIN
MAX
Viewport
Air Side Plug
VOLTAGE
DC
Isolator
50 Ohm BNC – Double Ended
LENGTH
Accessories
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
101
Feedthrough
C.4
BNC
50 Ohm – High Frequency
COAXIAL
Single Ended - Grounded Shield
Double Ended - Grounded Shield
Weldable
Weldable
Inconel X-750
Multipin Connector
Ø.040
[1.0]
Ø.622±.001
[15.80]
Ø.622±.001
[15.80]
.13 [3.3]
.13 [3.3]
.51 [13]
.70 [18]
.83 [21]
.70 [18]
ISO KF
Coaxial
ISO KF
Ø1.57
[40]
Isolator
Thermocouple
Ø1.57
[40]
.51 [13]
.83 [21]
.83 [21]
.70 [18]
ConFlat
ConFlat
NW16CF
NW16CF
Ø1.33
[34]
Viewport
Ø1.33
[34]
.29 [7.4]
.29 [7.4]
.35 [8.8]
Pressure
1.0 [25]
1.0 [25]
.55 [14]
Specifications
Accessories
Materials
Housing: 304 Stainless steel
Pin: Inconel X-750
Insulation: Glass-ceramic
Magnetic Materials: No
R
W
UM
VS
IM
AX
Voltage Rating 500 V DC
M
Technical Reference
Current Rating 1 Amp
102
Temperature Range -269°C to 350°C, ISO KF -25°C to 205°C
Typical VSWR
Pressure @ 20°C 1400 PSIG (97 Bar), ISO KF 0 PSIG
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
BNC
50 Ohm – High Frequency
COAXIAL
STYLE
INSTALLATION
PART
NUMBER
Single Ended
Double Ended
Weld
Weld
21200-01-W
21201-01-W
Weldable
ISO KF
NW25KF
NW25KF
21205-01-KF
21207-01-KF
Single Ended
Double Ended
1 1/3” ConFlat (NW16CF)
1 1/3” ConFlat (NW16CF)
Coaxial
Single Ended
Double Ended
CONFLAT FLANGE
Single & Double Ended
ConFlat
Multipin Connector
ISO FLANGE
Single & Double Ended
Feedthrough
Single & Double Ended
C.4
21204-01-CF
21206-01-CF
Thermocouple
Air Side Plug
VOLTAGE
DC
CONDUCTOR
AMPS
Air Side
500 V
5
50 Ohm BNC – Double Ended
0.56 [14]
1.1 [28]
LENGTH
VOLTAGE
DC
CONDUCTOR
AMPS
10’
500 V
5
DESCRIPTION
PART
NUMBER
BNC Plug
7116-02
TEMPERATURE
MIN
MAX
PART
NUMBER
-40
85
Viewport
TYPE
DIMENSIONS
H
L
Isolator
Air Side Cable
Assembly
TYPE
18921-01-A
Pressure
Contacts
TYPE
DESCRIPTION
PART
NUMBER
Copper Alloy - Gold Flash
Accepts wire up to 0.040 [1.0]
For 0.025” – 0.075” Diameters
16167-03-A
2840-05
*Contacts priced and sold in packages of 5. See the Accessories section for more information on all accessories.
Accessories
Crimp Type Contacts
Crimp Tool
MATERIAL
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
103
COAXIAL
MHV
Low Frequency / Single Ended – Grounded Shield
Weldable
ISO KF - NW40KF
ISO KF - NW16KF
ConFlat - NW35CF
Viewport
Isolator
Thermocouple
Coaxial
Multipin Connector
Feedthrough
C.5
ConFlat - NW16CF
Specifications
Materials
Housing: 304 Stainless steel
Pin: 304 Stainless steel
Insulation: Alumina ceramic
Magnetic Materials: No
Accessories
Pressure
6
Voltage Rating 5 kV DC
Current Rating 3.6 Amps
Technical Reference
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
104
Pressure @ 20°C
8
USA: (800) 752-7325
1400 PSIG (97 Bar), ISO KF 0 PSIG
www2.ceramtec.com
sales@ceramtec.com
MHV
Low Frequency / Single Ended – Grounded Shield
COAXIAL
NO.
PINS
INSTALLATION
PART
NUMBER
1
Weld
5230-07-W
Feedthrough
Single Ended
Weldable
C.5
Multipin Connector
ISO FLANGE
Single Ended
ISO KF
1
1
2
3
4
NW16KF
NW40KF
NW40KF
NW40KF
NW40KF
Single Ended
ConFlat
1
1
2
3
4
1 1/3” ConFlat (NW16CF)
2 3/4” ConFlat (NW35CF)
2 3/4” ConFlat (NW35CF)
2 3/4” ConFlat (NW35CF)
2 3/4” ConFlat (NW35CF)
17114-03-KF
17114-07-KF
17136-03-KF
17137-03-KF
17138-03-KF
Coaxial
CONFLAT FLANGE
VOLTAGE
DC
CONDUCTOR
AMPS
Air Side
5 kV
10
52 Ohm MHV – Double Ended
TYPE
0.094 Set Screw Type Contacts
0.094 Barrel Type Contacts
1.5 [38]
LENGTH
VOLTAGE
DC
CONDUCTOR
AMPS
10’
5 kV
10
MATERIAL
Beryllium Copper
Beryllium Copper
PART
NUMBER
MHV Plug
7116-01
TEMPERATURE
MIN
MAX
PART
NUMBER
-55
85
DESCRIPTION
Accepts wire up to 0.050 [1.3]
Accepts wire up to 0.094 [2.4]
18921-02-A
Pressure
Contacts
0.56 [14]
DESCRIPTION
Viewport
TYPE
DIMENSIONS
H
L
Isolator
Air Side Cable
Assembly
TYPE
Thermocouple
Air Side Plug
6924-03-CF
7590-02-CF
5822-05-CF
6647-01-CF
7184-06-CF
PART
NUMBER
7429-01-A†
7332-04-A
Accessories
*Contacts priced and sold in packages of 10. †Shown in photo. See the Accessories section for more information on all accessories.
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
105
MHV
Low Frequency / Double Ended – Grounded Shield
COAXIAL
Weldable
ISO KF
Coaxial
Multipin Connector
Feedthrough
C.5
6
ISO KF - NW16KF
Viewport
Isolator
Thermocouple
ConFlat
Specifications
Pressure
Materials
Housing: 304 Stainless steel
Pin: 304 Stainless steel
Insulation: Alumina ceramic
Magnetic Materials: No
ConFlat - NW16CF
Voltage Rating 5 kV DC
Technical Reference
Accessories
Current Rating 3.6 Amps
106
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
Pressure @ 20°C 1400 PSIG (97 Bar), ISO KF 0 PSIG
6
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
MHV
Low Frequency / Double Ended – Grounded Shield
COAXIAL
NO.
PINS
INSTALLATION
PART
NUMBER
1
Weld
17115-03-W
NW16KF
NW40KF
NW40KF
NW50KF
NW50KF
Double Ended
ConFlat
1
1
2
3
4
1 1/3” ConFlat (NW16CF)
2 3/4” ConFlat (NW35CF)
2 3/4” ConFlat (NW35CF)
2 3/4” ConFlat (NW35CF)
3 3/8” ConFlat (NW50CF)
17116-03-KF
17118-03-KF
17118-07-KF
17122-03-KF
17139-03-KF
Coaxial
CONFLAT FLANGE
Air Side Plug
TYPE
VOLTAGE
DC
CONDUCTOR
AMPS
Air Side
5 kV
10
52 Ohm MHV – Double Ended
0.56 [14]
1.5 [38]
LENGTH
VOLTAGE
DC
CONDUCTOR
AMPS
10’
5 kV
10
PART
NUMBER
MHV Plug
7116-01
TEMPERATURE
MIN
MAX
PART
NUMBER
-55
85
18921-02-A
Pressure
See the Accessories section for more information on all accessories.
DESCRIPTION
Viewport
TYPE
DIMENSIONS
H
L
Isolator
Air Side Cable
Assembly
17117-03-CF
18604-03-CF
17187-03-CF
17188-03-CF
17189-03-CF
Thermocouple
1
1
2
3
4
Multipin Connector
ISO FLANGE
Double Ended
ISO KF
Feedthrough
Double Ended
Weldable
C.5
Accessories
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
107
Multipin Connector
Feedthrough
C.5
MHV
Low Frequency / Single Ended – Floating Shield
COAXIAL
Specifications
Weldable
Materials
Housing: 52 Nickel Iron
Pin: 304 Stainless steel
Insulation: Alumina ceramic
Magnetic Materials: Yes
17
Voltage Rating Pin/Shield: 5 kV DC, Shield/Gnd: 2.5 kV DC
Current Rating 3.6 Amps
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
Pressure @ 20°C 300 PSIG (20 Bar), ISO KF 0 PSIG
Coaxial
8.9
Viewport
Isolator
Thermocouple
ISO KF
Technical Reference
Accessories
Pressure
ConFlat
108
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
MHV
Low Frequency / Single Ended – Floating Shield
COAXIAL
INSTALLATION
PART
NUMBER
Weld
6511-04-W
NW40KF
17177-03-KF
Coaxial
CONFLAT FLANGE
Single Ended
ConFlat
Multipin Connector
ISO FLANGE
Single Ended
ISO KF
Feedthrough
Single Ended
Weldable
C.5
2 3/4” (NW35CF)
17178-03-CF
Thermocouple
Air Side Plug
VOLTAGE
DC
CONDUCTOR
AMPS
Air Side
5 kV
10
52 Ohm MHV – Double Ended
TYPE
1.5 [38]
LENGTH
VOLTAGE
DC
CONDUCTOR
AMPS
10’
5 kV
10
MATERIAL
PART
NUMBER
MHV Plug
7116-01
TEMPERATURE
MIN
MAX
PART
NUMBER
-55
85
DESCRIPTION
18921-02-A
PART
NUMBER
0.094 Set Screw Type Contacts
Beryllium Copper
Accepts wire up to 0.050 [1.3]
7429-01-A†
0.094 Barrel Type Contacts
Beryllium Copper
Accepts wire up to 0.094 [2.4]
7332-04-A
Accessories
*Contacts priced and sold in packages of 10. †Shown in photo. See the Accessories section for more information
on all accessories.
Pressure
Contacts
0.56 [14]
DESCRIPTION
Viewport
TYPE
DIMENSIONS
H
L
Isolator
Air Side Cable
Assembly
TYPE
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
109
MHV
Low Frequency / Double Ended – Floating Shield
COAXIAL
Weldable
ISO KF - NW40KF
ISO KF - NW16KF
ConFlat - NW35CF
Isolator
Thermocouple
Coaxial
Multipin Connector
Feedthrough
C.5
Pressure
Viewport
25
ConFlat - NW16CF
Specifications
Materials
Technical Reference
Accessories
Housing: 304 Stainless steel
Pin: 304 Stainless steel
Insulation: Alumina ceramic
Magnetic Materials: Yes
110
Voltage Rating Pin/Shield: 5 kV DC, Shield/Gnd: 2.5 kV DC
25
Current Rating 3.6 Amps
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
Pressure @ 20°C 400 PSIG (28 Bar), ISO KF 0 PSIG
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
MHV
Low Frequency / Double Ended – Floating Shield
COAXIAL
PART
NUMBER
INSTALLATION
Weld
17190-03-W
NW16KF
NW40KF
17191-03-KF
17191-07-KF
Coaxial
CONFLAT FLANGE
Double Ended
ConFlat
Multipin Connector
ISO FLANGE
Double Ended
ISO KF
Feedthrough
Double Ended
Weldable
C.5
1 1/3” (NW16CF)
2 3/4” (NW35CF)
17192-03-CF
17193-03-CF
Thermocouple
Air Side Plug
VOLTAGE
DC
CONDUCTOR
AMPS
Air Side
5 kV
10
52 Ohm MHV – Double Ended
0.56 [14]
1.5 [38]
LENGTH
VOLTAGE
DC
CONDUCTOR
AMPS
10’
5 kV
10
PART
NUMBER
MHV Plug
7116-01
TEMPERATURE
MIN
MAX
-55
85
PART
NUMBER
18921-02-A
Pressure
See the Accessories section for more information on all accessories.
DESCRIPTION
Viewport
TYPE
DIMENSIONS
H
L
Isolator
Air Side Cable
Assembly
TYPE
Accessories
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
111
COAXIAL
Single Ended – Grounded Shield
Double Ended – Grounded Shield
Weldable
Weldable
ISO KF
ISO KF
Coaxial
Multipin Connector
Feedthrough
C.6
Type N
Low Frequency
Thermocouple
Ø1.57
[40]
ConFlat - NW16CF
Pressure
Viewport
Isolator
ConFlat
ConFlat - NW35CF
Specifications
Accessories
Materials
Housing: 304 Stainless steel
Pin: 304 Stainless steel
Insulation: Alumina ceramic
Magnetic Materials: No
Technical Reference
Voltage Rating 1.5 kV DC
112
Current Rating 3.6 Amps
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
Pressure @ 20°C See table
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
Type N
Low Frequency
COAXIAL
Weldable
STYLE
INSTALLATION
Single Ended
Double Ended
Weld
Weld
PART
NUMBER
PRESSURE @ 20˚C
PSIG
BAR
124
124
7589-02-W†
18077-02-W
-
-
18057-01-KF
18078-02-KF†
1800
1500
1500
124
103
103
7588-02-CF†
7587-02-CF
18080-02-CF
ISO FLANGE
Single & Double Ended
ISO KF
Single Ended
Double Ended
NW25KF
NW40KF
Coaxial
CONFLAT FLANGE
Single & Double Ended
ConFlat
Single Ended
Single Ended
Double Ended
Multipin Connector
1800
1800
Feedthrough
Single & Double Ended
C.6
1 1/3” (NW16CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
Thermocouple
Air Side Plug
VOLTAGE
DC
CONDUCTOR
AMPS
Air Side
1.5 kV
5
50 Ohm Type N – Double Ended
TYPE
0.094 Set Screw Type Contacts
0.094 Barrel Type Contacts
1.5 [38]
LENGTH
VOLTAGE
DC
CONDUCTOR
AMPS
10’
1.5 kV
5
MATERIAL
Beryllium Copper
Beryllium Copper
PART
NUMBER
Type N Plug
7707-01
TEMPERATURE
MIN
MAX
-55
85
DESCRIPTION
Accepts wire up to 0.050 [1.3]
Accepts wire up to 0.094 [2.4]
PART
NUMBER
21619-01-A
PART
NUMBER
Pressure
Contacts
0.81 [20]
DESCRIPTION
Viewport
TYPE
DIMENSIONS
H
L
Isolator
Air Side Cable
Assembly
TYPE
7429-01-A†
7332-04-A
Accessories
*Contacts priced and sold in packages of 10. †Shown in photo. See the Accessories section for more information
on all accessories.
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
113
Type N
50 Ohm – High Frequency
COAXIAL
Single Ended – Grounded Shield
Double Ended – Grounded Shield
Weldable
Weldable
Multipin Connector
Feedthrough
C.6
Thermocouple
Coaxial
ISO KF
ISO KF
Viewport
Isolator
ConFlat
Pressure
ConFlat
Specifications
Materials
Accessories
Housing: 304 Stainless steel
Pin/Contact: Beryllium Copper
Insulation: Glass-ceramic
Magnetic Materials: No
Voltage Rating 1.5 kV DC
Technical Reference
Current Rating 1 Amp
114
Temperature Range -200°C to 225°C, ISO KF -25°C to 205°C
Pressure @ 20°C 500 PSIG (34 Bar), ISO KF 0 PSIG
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
Type N
50 Ohm – High Frequency
COAXIAL
Weldable
STYLE
INSTALLATION
PART
NUMBER
Single Ended
Double Ended
Weld
Weld
18066-01-W†
18069-01-W
ISO KF
Single Ended
Double Ended
NW40KF
NW40KF
18067-01-KF
18070-01-KF†
Coaxial
CONFLAT FLANGE
Single & Double Ended
ConFlat
Single Ended
Double Ended
Multipin Connector
ISO FLANGE
Single & Double Ended
Feedthrough
Single & Double Ended
C.6
18068-01-CF†
18071-01-CF
2 3/4” (NW35CF)
2 3/4” (NW35CF)
Thermocouple
Air Side Plug
VOLTAGE
DC
CONDUCTOR
AMPS
Air Side
1.5 kV
5
50 Ohm Type N – Double Ended
0.81 [20]
1.5 [38]
LENGTH
VOLTAGE
DC
CONDUCTOR
AMPS
10’
1.5 kV
5
DESCRIPTION
PART
NUMBER
Type N Plug
7707-01
TEMPERATURE
MIN
MAX
-55
Type N*
21619-01-A
Pressure
†Shown in photo. See the Accessories section for more information on all accessories.
85
PART
NUMBER
Viewport
TYPE
DIMENSIONS
H
L
Isolator
Air Side Cable
Assembly
TYPE
Accessories
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
Technical Reference
*Applies when properly mated to a 50 Ohm load.
115
COAXIAL
Specifications
Single Ended – Grounded Shield
Materials
Weldable
Housing: 304 Stainless steel
Pin: 70/30 Copper Nickel
Insulation: Alumina ceramic
Magnetic Materials: No
Voltage Rating 7 kV DC
Current Rating 7 Amps
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
Pressure @ 20°C 320 PSIG (22 Bar), ISO KF 0 PSIG
Thermocouple
Coaxial
Multipin Connector
Feedthrough
C.7
HN
50 Ohm – High Frequency
Viewport
Isolator
ISO KF
Technical Reference
Accessories
Pressure
ConFlat
116
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
HN
50 Ohm – High Frequency
COAXIAL
PART
NUMBER
INSTALLATION
Weld
1084-01-W
ISO KF
NW40KF
18072-01-KF
Coaxial
CONFLAT FLANGE
ConFlat
Multipin Connector
ISO FLANGE
Feedthrough
Weldable
C.7
2 3/4” (NW35CF)
10339-02-CF
Thermocouple
Air Side Plug
VOLTAGE
DC
CONDUCTOR
AMPS
Air Side
7 kV
10
DIMENSIONS
H
L
0.88 [22]
MATERIAL
0.250 Barrel Type Contacts
Beryllium Copper
PART
NUMBER
HN Plug
6524-05
DESCRIPTION
Accepts wire up to 0.250 [6.4]
PART
NUMBER
7332-06-A
Viewport
TYPE
2.4 [61]
DESCRIPTION
Isolator
Contacts
TYPE
*Contacts priced and sold in packages of 10. See the Accessories section for more information on all accessories.
Pressure
Accessories
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
117
COAXIAL
SHV 5 KV - Exposed
SHV 5 KV - Exposed
Weldable
ISO KF - NW40KF
ISO KF - NW16KF
ConFlat - NW35CF
Specifications
ConFlat - NW16CF
Materials
Housing: 304 Stainless steel
Pin: Nickel
Insulation: Alumina ceramic
Magnetic Materials: Yes
Voltage Rating 5 kV DC
Accessories
Pressure
Viewport
Isolator
Thermocouple
Coaxial
Multipin Connector
Feedthrough
C.8
SHV 5 KV
Single Ended - Grounded Shield / Exposed Insulator
Current Rating 16.5 Amps
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
Technical Reference
Pressure @ 20°C See table
118
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
COAXIAL
NO.
PINS
INSTALLATION
1
Weld
PRESSURE @ 20˚C
PSIG
BAR
C.8
PART
NUMBER
110
8630-02-W
-
-
17205-01-KF
17208-07-KF
17208-01-KF
17208-03-KF
17208-05-KF
1600
1500
1500
1500
1500
110
103
103
103
103
8880-02-CF
14366-07-CF
14366-03-CF
14366-05-CF
14366-01-CF
ISO FLANGE
1
1
2
3
4
ISO KF
NW16KF
NW40KF
NW40KF
NW40KF
NW40KF
Coaxial
CONFLAT FLANGE
ConFlat
Air Side Plug
VOLTAGE
DC
CONDUCTOR
AMPS
Air Side
5 KV
10
DIMENSIONS
H
L
0.56 [14]
1.8 [46]
TYPE
LENGTH
VOLTAGE
DC
CONDUCTOR
AMPS
52 Ohm SHV – Double Ended
10’
5 kV
10
MATERIAL
PART
NUMBER
SHV 5 kV Plug
8058-01
TEMPERATURE
MIN
MAX
PART
NUMBER
-55
85
DESCRIPTION
18921-03-A
PART
NUMBER
0.094 Set Screw Type Contacts
Beryllium Copper
Accepts wire up to 0.050 [1.3]
7429-01-A†
0.094 Barrel Type Contacts
Beryllium Copper
Accepts wire up to 0.094 [2.4]
7332-04-A
Accessories
*Contacts priced and sold in packages of 10. †Shown in photo. See the Accessories section for more information
on all accessories.
Pressure
TYPE
DESCRIPTION
Viewport
Contacts
TYPE
Isolator
Air Side Cable
Assembly
1 1/3” (NW16CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
Thermocouple
1
1
2
3
4
Multipin Connector
1600
Feedthrough
Weldable
SHV 5 KV
Single Ended - Grounded Shield / Exposed Insulator
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
119
COAXIAL
SHV 5 KV
Single Ended - Grounded Shield / Recessed Insulator
SHV 5 KV - Recessed
SHV 5 KV - Recessed
Weldable
ISO KF - NW40KF
ISO KF - NW16KF
ConFlat - NW35CF
Pressure
Viewport
Isolator
Thermocouple
Coaxial
Multipin Connector
Feedthrough
C.8
ConFlat - NW16CF
Specifications
Materials
Accessories
Housing: 304 Stainless steel
Pin: Nickel
Insulation: Alumina ceramic
Magnetic Materials: Yes
Voltage Rating 5 kV DC
Technical Reference
Current Rating 16.5 Amps
120
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
Pressure @ 20°C See table
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
COAXIAL
NO.
PINS
INSTALLATION
1
Weld
C.8
PART
NUMBER
PRESSURE @ 20˚C
PSIG
BAR
110
8030-02-W
-
-
17207-02-KF
17206-07-KF
17206-01-KF
17206-03-KF
17206-05-KF
1600
1500
1500
1500
1500
110
103
103
103
103
9485-02-CF
11179-04-CF
0268-02-CF
1958-02-CF
11179-02-CF
ISO FLANGE
1
1
2
3
4
ISO KF
NW16KF
NW40KF
NW40KF
NW40KF
NW40KF
Coaxial
CONFLAT FLANGE
ConFlat
Air Side Plug
VOLTAGE
DC
CONDUCTOR
AMPS
Air Side
5 kV
10
DIMENSIONS
H
L
0.56 [14]
1.8 [46]
TYPE
LENGTH
VOLTAGE
DC
CONDUCTOR
AMPS
52 Ohm SHV – Double Ended
10’
5 kV
10
0.094 Set Screw Type Contacts
0.094 Barrel Type Contacts
MATERIAL
Beryllium Copper
Beryllium Copper
PART
NUMBER
SHV 5 kV Plug
8058-01
TEMPERATURE
MIN
MAX
PART
NUMBER
-55
85
DESCRIPTION
Accepts wire up to 0.050 [1.3]
Accepts wire up to 0.094 [2.4]
18921-03-A
PART
NUMBER
Pressure
TYPE
DESCRIPTION
Viewport
Contacts
TYPE
Isolator
Air Side Cable
Assembly
1 1/3” (NW16CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
Thermocouple
1
1
2
3
4
Multipin Connector
1600
Feedthrough
Weldable
SHV 5 KV
Single Ended - Grounded Shield / Recessed Insulator
7429-01-A†
7332-04-A
Accessories
*Contacts priced and sold in packages of 10. †Shown in photo. See the Accessories section for more information
on all accessories.
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
121
Multipin Connector
Feedthrough
C.8
SHV 5 KV
Single Ended – Floating Shield
COAXIAL
Specifications
Weldable
.030 [0.76] Weld Lip
304 Stn. Stl.
Nickel
Conductor
Materials
Housing: 304 Stainless steel
Pin: Nickel
Insulation: Alumina ceramic
Magnetic Materials: Yes
Ø.094
[2.4]
Voltage Rating Pin/Shield: 5 kV DC, Shield/Gnd: 2.5 kV DC
Ø1.25
[32]
Current Rating 16.5 Amps
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
Pressure @ 20°C 300 PSIG (20 Bar), ISO KF 0 PSIG
.36 [9.3]
.25 [6.3]
1.0 [25]
Coaxial
.92 [23]
ISO KF
NW40KF
Thermocouple
Nickel
Conductor
Ø.094
[2.4]
Isolator
Ø2.16
[55]
.94 [24]
Viewport
1.0 [25]
ConFlat
NW35CF
Nickel
Conductor
Pressure
Ø.094
[2.4]
Accessories
Ø2.73
[69]
Technical Reference
.50 [13]
122
1.0 [25]
1.0 [25]
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
SHV 5 KV
Single Ended – Floating Shield
COAXIAL
INSTALLATION
PART
NUMBER
Weld
15619-01-W
ISO KF
NW40KF
21303-01-KF
Coaxial
CONFLAT FLANGE
ConFlat
Multipin Connector
ISO FLANGE
Feedthrough
Weldable
C.8
2 3/4” (NW35CF)
21304-01-CF
Thermocouple
Air Side Plug
CONDUCTOR
AMPS
Air Side
5 kV
10
DIMENSIONS
H
L
0.56 [14]
1.8 [46]
TYPE
LENGTH
VOLTAGE
DC
CONDUCTOR
AMPS
52 Ohm SHV – Double Ended
10’
5 kV
10
MATERIAL
PART
NUMBER
SHV 5 kV Plug
8058-01
TEMPERATURE
MIN
MAX
-55
85
DESCRIPTION
PART
NUMBER
18921-03-A
PART
NUMBER
0.094 Set Screw Type Contacts
Beryllium Copper
Accepts wire up to 0.050 [1.3]
7429-01-A†
0.094 Barrel Type Contacts
Beryllium Copper
Accepts wire up to 0.094 [2.4]
7332-04-A
Accessories
*Contacts priced and sold in packages of 10. †Shown in photo. See the Accessories section for more information
on all accessories.
Pressure
TYPE
DESCRIPTION
Viewport
Contacts
VOLTAGE
DC
Isolator
Air Side Cable
Assembly
TYPE
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
123
BSHV 7.5 KV
Single Ended – Grounded Shield
COAXIAL
Weldable
ConFlat - NW35CF
ISO KF
Pressure
Viewport
Isolator
Thermocouple
Coaxial
Multipin Connector
Feedthrough
C.9
ConFlat - NW16CF
Specifications
Materials
Accessories
Housing: 304 Stainless steel
Pin: Nickel
Insulation: Alumina ceramic
Magnetic Materials: Yes
Voltage Rating 7.5 kV DC
Technical Reference
Current Rating 16.5 Amps
124
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
Pressure @ 20°C See table
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
BSHV 7.5 KV
Single Ended – Grounded Shield
COAXIAL
INSTALLATION
Weld
PART
NUMBER
PRESSURE @ 20˚C
PSIG
BAR
110
7546-02-W
-
-
18047-02-KF
1600
1500
110
103
7585-02-CF
7584-02-CF
ISO FLANGE
ISO KF
NW16KF
Coaxial
CONFLAT FLANGE
ConFlat
1 1/3” (NW16CF)
2 3/4” (NW35CF)
Multipin Connector
1600
Feedthrough
Weldable
C.9
Thermocouple
Air Side Plug
VOLTAGE
DC
CONDUCTOR
AMPS
Air Side
7.5 kV
8
0.88 [22]
3.5 [88]
MATERIAL
DESCRIPTION
PART
NUMBER
BSHV Plug
7604-01-A
DESCRIPTION
PART
NUMBER
0.094 Set Screw Type Contacts
Beryllium Copper
Accepts wire up to 0.050 [1.3]
7429-01-A†
0.094 Barrel Type Contacts
Beryllium Copper
Accepts wire up to 0.094 [2.4]
7332-04-A
Pressure
*Contacts priced and sold in packages of 10. †Shown in photo. See the Accessories section for more information
on all accessories.
Viewport
TYPE
DIMENSIONS
H
L
Isolator
Contacts
TYPE
Accessories
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
125
COAXIAL
SHV 10 KV
Single Ended - Grounded Shield / Exposed Insulator
SHV 10 KV - Exposed
ISO KF
Weldable
ConFlat
ISO KF - NW16KF
Pressure
Viewport
Isolator
Thermocouple
Coaxial
Multipin Connector
Feedthrough
C.10
ConFlat - NW16CF
Specifications
Materials
Accessories
Housing: 304 Stainless steel
Pin: Nickel
Insulation: Alumina ceramic
Magnetic Materials: Yes
Voltage Rating 10 kV DC
Technical Reference
Current Rating 10 Amps
126
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
Pressure @ 20°C 120 PSIG (8.3 Bar), ISO KF 0 PSIG
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
COAXIAL
C.10
NO.
PINS
INSTALLATION
PART
NUMBER
1
Weld
17213-01-W
ISO KF
NW16KF
NW40KF
NW40KF
NW50KF
NW50KF
18043-01-KF
17215-07-KF
17215-01-KF
17215-03-KF
17215-05-KF
Coaxial
CONFLAT FLANGE
ConFlat
Air Side Plug
TYPE
VOLTAGE
DC
CONDUCTOR
AMPS
Air Side
10 kV
10
17214-01-CF
17216-08-CF
17216-02-CF
17216-04-CF
17216-06-CF
DIMENSIONS
H
L
0.56 [14]
MATERIAL
0.062 Crimp Contacts
0.062 Crimp Contacts
0.062 Barrel Type Contacts
Crimp Tool
Nickel Alloy
Beryllium Copper
Beryllium Copper
PART
NUMBER
SHV 10 kV Plug
8058-02
DESCRIPTION
Accepts wire up to 0.062 [1.6]
Accepts wire up to 0.062 [1.6]
Accepts wire up to 0.062 [1.6]
For 0.025” - 0.075” Diameters
PART
NUMBER
0821-01-A†
2044-02-A
7332-03-A
2840-05
Pressure
*Contacts priced and sold in packages of 10. †Shown in photo. See the Accessories section for more information
on all accessories.
Viewport
TYPE
1.8 [46]
DESCRIPTION
Isolator
Contacts
1 1/3” (NW16CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
3 3/8” (NW50CF)
Thermocouple
1
1
2
3
4
Multipin Connector
ISO FLANGE
1
1
2
3
4
Feedthrough
Weldable
SHV 10 KV
Single Ended - Grounded Shield / Exposed Insulator
Accessories
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
127
COAXIAL
SHV 10 KV
Single Ended - Grounded Shield / Recessed Insulator
SHV 10 KV - Recessed Insulator
ISO KF
Weldable
ConFlat
ISO KF - NW16KF
Pressure
Viewport
Isolator
Thermocouple
Coaxial
Multipin Connector
Feedthrough
C.10
ConFlat - NW16CF
Specifications
Materials
Accessories
Housing: 304 Stainless steel
Pin: Nickel
Insulation: Alumina ceramic
Magnetic Materials: Yes
Voltage Rating 10 kV DC
Technical Reference
Current Rating 10 Amps
128
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
Pressure @ 20°C 120 PSIG (8.3 Bar), ISO KF 0 PSIG
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
COAXIAL
C.10
NO.
PINS
INSTALLATION
PART
NUMBER
1
Weld
17217-01-W
ISO KF
NW25KF
NW40KF
NW40KF
NW50KF
NW50KF
17218-01-KF
18000-07-KF
18000-01-KF
18000-03-KF
18000-05-KF
Coaxial
CONFLAT FLANGE
ConFlat
Air Side Plug
TYPE
VOLTAGE
DC
CONDUCTOR
AMPS
Air Side
10 kV
10
17219-01-CF
18001-07-CF
18001-01-CF
18001-03-CF
18001-05-CF
DIMENSIONS
H
L
0.56 [14]
MATERIAL
0.062 Crimp Contacts
0.062 Crimp Contacts
0.062 Barrel Type Contacts
Crimp Tool
Nickel Alloy
Beryllium Copper
Beryllium Copper
SHV 10 kV Plug
DESCRIPTION
Accepts wire up to 0.062 [1.6]
Accepts wire up to 0.062 [1.6]
Accepts wire up to 0.062 [1.6]
For 0.025” - 0.075” Diameters
PART
NUMBER
8058-02
PART
NUMBER
0821-01-A†
2044-02-A
7332-03-A
2840-05
Pressure
*Contacts priced and sold in packages of 10. †Shown in photo. See the Accessories section for more information
on all accessories.
Viewport
TYPE
1.8 [46]
DESCRIPTION
Isolator
Contacts
1 1/3” (NW16CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
3 3/8” (NW50CF)
Thermocouple
1
1
2
3
4
Multipin Connector
ISO FLANGE
1
1
2
3
4
Feedthrough
Weldable
SHV 10 KV
Single Ended - Grounded Shield / Recessed Insulator
Accessories
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
129
SHV 20 KV
Single Ended – Grounded Shield
COAXIAL
SHV 20 KV - Exposed Insulator
SHV 20 KV - Recessed Insulator
Weldable
Weldable
ISO KF
ISO KF
6
ConFlat
ConFlat
Pressure
Viewport
Isolator
Thermocouple
Coaxial
Multipin Connector
Feedthrough
C.11
Specifications
Materials
Accessories
Housing: 304 Stainless steel
Pin: Nickel
Insulation: Alumina ceramic
Magnetic Materials: Yes
Voltage Rating 20 kV DC
Technical Reference
Current Rating 16.5 Amps
130
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
Pressure @ 20°C 250 PSIG (17 Bar), ISO KF 0 PSIG
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
SHV 20 KV
Single Ended – Grounded Shield
COAXIAL
STYLE
INSTALLATION
PART
NUMBER
Exposed Insulator
Recessed Insulator
Weld
Weld
18086-01-W
18089-01-W†
ConFlat
Exposed Insulator
Recessed Insulator
18087-01-KF†
18090-01-KF
NW25KF
NW25KF
Coaxial
ISO KF
Multipin Connector
ISO FLANGE
Exposed Insulator
Recessed Insulator
Feedthrough
Weldable
C.11
CONFLAT FLANGE
18088-01-CF†
18091-01-CF
1 1/3” (NW16CF)
1 1/3” (NW16CF)
Thermocouple
Air Side Plug
VOLTAGE
DC
CONDUCTOR
AMPS
Air Side
20 kV
20
0.094 Set Screw Type Contacts
0.094 Barrel Type Contacts
0.75 [19]
4.5 [115]
DESCRIPTION
PART
NUMBER
SHV 20 kV Plug
8208-02
MATERIAL
DESCRIPTION
PART
NUMBER
Beryllium Copper
Beryllium Copper
Accepts wire up to 0.050 [1.3]
Accepts wire up to 0.094 [2.4]
7429-01-A†
7332-04-A
Pressure
*Contacts priced and sold in packages of 10. †Shown in photo. See the Accessories section for more information
on all accessories.
Viewport
TYPE
DIMENSIONS
H
L
Isolator
Contacts
TYPE
Accessories
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
131
Multipin Connector
Feedthrough
C.12
Between Series
Type N to SMA – 50 Ohm - High Frequency
COAXIAL
Specifications
Weldable
Materials
Housing: 304 Stainless steel
Pin: Inconel X-750
Contacts: 300 Series Stainless steel
Insulation: Glass-ceramic
Magnetic Materials: No
Voltage Rating 1.5 kV DC
Current Rating 1 Amp
Temperature Range -269°C to 350°C, ISO KF -25°C to 205°C
Coaxial
Pressure @ 20°C 1400 PSIG (97 Bar), ISO KF 0 PSIG
Viewport
Isolator
Thermocouple
ISO KF
Technical Reference
Accessories
Pressure
ConFlat
132
20
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
Between Series
Type N to SMA – 50 Ohm - High Frequency
COAXIAL
INSTALLATION
PART
NUMBER
Weld
15025-02-W
ISO KF
NW40KF
18083-02-KF
Coaxial
CONFLAT FLANGE
ConFlat
Multipin Connector
ISO FLANGE
Feedthrough
Weldable
C.12
2 3/4” (NW35CF)
18084-02-CF
Thermocouple
Air Side Plug
VOLTAGE
DC
CONDUCTOR
AMPS
Air Side
1.5 kV
5
50 Ohm Type N – Double Ended
0.81 [20]
1.5 [38]
LENGTH
VOLTAGE
DC
CONDUCTOR
AMPS
10’
1.5 kV
5
Type N-SMA
PART
NUMBER
Type N Plug
7707-01
TEMPERATURE
MIN
MAX
-55
85
PART
NUMBER
21619-01-A
Pressure
See the Accessories section for more information on all accessories.
DESCRIPTION
Viewport
TYPE
DIMENSIONS
H
L
Isolator
Air Side Cable
Assembly
TYPE
Accessories
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
133
Between Series
BNC to Microdot
COAXIAL
ISO KF - NW40KF
Weldable
1.5 [38]
.028 [0.70] Wall
304 Stn. Stl.
Ø .75 [19]
Ø .90 [23]
Ø .90 [23]
NW40KF
.92 [23]
Ø.495±.002
[12.6]
.13 [3.3]
Ø2.16
[55]
Coaxial
Multipin Connector
Feedthrough
C.12
.47 [12]
Thermocouple
1.0 [25]
ISO KF - NW16KF
ConFlat - NW35CF
NW16KF
Ø1.18
[30]
Isolator
Ø .75 [19]
Ø .75 [19]
Ø .90 [23]
NW35CF
.41 [10]
1.08 [27]
Viewport
Ø2.73
[69]
Pressure
.47 [12]
.50 [13]
1.0 [25]
ConFlat - NW16CF
NW16CF
Specifications
Materials
Accessories
Ø1.33
[34]
Voltage Rating 500 V DC
Technical Reference
.29 [7.2]
134
1.0 [25]
Housing: 304 Stainless steel
Pin: 330 Stainless steel
Insulation: Glass-ceramic
Magnetic Materials: No
.47 [12]
Current Rating 5 Amps
Temperature Range -269°C to 450°C, ISO KF -25°C to 205°C
Pressure @ 20°C 1400 PSIG (97 Bar), ISO KF 0 PSIG
USA: (800) 752-7325
www2.ceramtec.com
sales@ceramtec.com
Between Series
BNC to Microdot
COAXIAL
NO.
PINS
INSTALLATION
PART
NUMBER
1
Weld
21254-01-W
ISO KF
NW16KF
NW40KF
NW40KF
NW40KF
NW40KF
21256-01-KF
21292-01-KF
21261-01-KF
21262-01-KF
21263-01-KF
Coaxial
CONFLAT FLANGE
ConFlat
0.56 [14]
1.1 [27]
DESCRIPTION
PART
NUMBER
BNC Plug
7116-02
50 Ohm BNC – Double Ended
10’
500 V
5
LENGTH
VOLTAGE
DC
CONDUCTOR
AMPS
12’’
24’’
36’’
500 V
500 V
500 V
2
2
2
Microdot Vacuum Side – Double Ended
Microdot Vacuum Side – Double Ended
Microdot Vacuum Side – Double Ended
-40
†Shown in photo. See the Accessories section for more information on all accessories.
85
18921-01-A
TEMPERATURE
MIN
MAX
-65˚C
-65˚C
-65˚C
125˚C
125˚C
125˚C
PART
NUMBER
15767-12-A
15767-24-A
15767-36-A†
Accessories
CONDUCTOR
AMPS
Pressure
VOLTAGE
DC
Viewport
LENGTH
TYPE
PART
NUMBER
TEMPERATURE
MIN
MAX
TYPE
Isolator
Vaccuum Side Cable
Assemblies
21255-01-CF
21291-01-CF
21257-01-CF
21258-01-CF
21259-01-CF
DIMENSIONS
H
L
TYPE
Air Side
Air Side Cable
Assembly
1 1/3” (NW16CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
2 3/4” (NW35CF)
Thermocouple
Air Side Plug
1
1
2
3
4
Multipin Connector
ISO FLANGE
1
1
2
3
4
Feedthrough
Weldable
C.12
Technical Reference
sales@ceramtec.com
www2.ceramtec.com
TEL: (864) 682-3215
135