FastTrap

FastTrap
The one-piece shower waste / waterproofing flange
7-46 mm
BS 50 mm / 2“
100 mm
Drainage by design!
Upgrade with!
120 x 120, 150 x 150 mm or
Ø 120 mm Design gratings
FastTrap - one piece drain
Perfect for wetrooms on timber or in solid floors. Polished, foot-friendly,
stainless steel grating
The latest addition to our range, the
FastTrap. The 100 mm height is proving
a winner in special applications such
as older property where lack of build-in
height has to be overcome.
· foot-friendly, polished stainless steel
grate
· height adjustable for up to 46 mm thick
floor finish - mosaics to marble
· use with brush-on or membrane undertile tanking
· use on plywood decks or in solid floors
· trap completely accessible from the top
· tested to over 45 l/min flow rate
Installation in timber floor
NEW! For installation in screed:
With Tisto-anchors for extra grip in the
screed.
E 115 grate (395553069)
K-frame (309022829)
short extension ring (309024592)
C 50 extension (309022827)
dip-tube (101023606)
O-ring (930051965)
trap bucket (300021192)
flange with fleece surface
BS 5255 2“ (56 mm) solvent weld socket
(909701974)
Tisto-anchors for extra grip in the
screed
drain body (588884760)
When installed in a timber floor:
The Tisto-anchors must be removed.
1
Floor drain FastTrap with
Tisto-anchors for
installation in screed
2
Simply snap off anchors!
3
Fast Trap without anchors
for installation in timber
floors
Floor drains FastTrap and couplings
Flow rate tested to DIN EN 1253
(with 20 mm water over grate)
0,76 l/s
Ø260
120
100
frame: ABS, 120 x 120 mm
DALLMER floor drain FastTrap CS 12
59
18
DALLMER floor drain FastTrap CKC 12
7-50
BS 2”
Ø56
BS 2“ horizontal,
ball-joint adjustable 0 - 15 °
with:
flange with fleece surface
removable trap insert
height adjustable grating
material:polypropylene with ABS connector
grate: 304 stainless steel, class K 3
25
outlet: 50
DALLMER floor drain FastTrap
frame: 304 stainless steel, 120 x 120 mm
174
FastTrap CKC 12
Dimension
Dimension grate
Part no.
PU
floor drain FastTrap CKC 12
BS 2“
120 x 120 mm
513137
1
floor drain FastTrap CS 12
BS 2“
120 x 120 mm
513441
1
DALLMER floor drain FastTrap
vertical
Flow rate tested to DIN EN 1253
(with 20 mm water over grate)
DN 50
1,34 l/s
Ø315
120
50
ABS, 95 x 95 mm
58
36
frame:
93
DALLMER floor drain FastTrap vertical
K 10
DALLMER floor drain FastTrap vertical
K 12
frame:
30
DN 50 vertical,
flange with fleece surface
removable trap insert
temporary blanking plate
height adjustable grating
material:polypropylene
grate:
304 stainless steel, class K 3
18
outlet: with:
7,3
Item
DN50
Ø110
Ø126
ABS, 120 x 120 mm
Item
Dimension
Dimension grate
Part no.
PU
floor drain FastTrap vertical K 10
DN 50
95 x 95 mm
513489
1
floor drain FastTrap vertical K 12
DN 50
120 x 120 mm
513472
1
DALLMER fire protection system 2
(Part No. 515025) applicable
Fire protection class R 30/60/90/120
approval number Z-19.17-1543
FastTrap vertical K 12
DALLMER coupling
DN 50 compression joint with
solvent weld socket BS 5255 2“
materials:
ABS, rubber
Item
Dimension
Part no.
PU
Couplings
DN 50 x BS 2“
880727
10
DALLMER pipe coupling HT/SML
for use with FastTrap vertical,
for quick connection between plastic and SML
cast iron pipework, including seal
materials:
polypropylene, rubber
DN50
Dimension
Part no.
PU
Pipe couplings
DN 50 x DN 50
880024
30
95
Item
DN50(SML)
Dallmer Design gratings
The Dallmer Fast-Trap can be supplied with any of these attractive 'Design' grate options and an
upgraded stainless steel frame.
Dallmer Design grates
Dimensions:
Material:
140 x 140, 115 x 115 or 115 diameter
5 mm 316 stainless steel, satin finish (other finishes to order on request)
Frame 150 x 150 with Dallmer Design grate 140 x 140
frame CKC 15
150 x 150 mm
stainless steel
+ plus
suitable
Design-grates
140 x 140 mm
*
QuadraStone 140
grate
Nero Assoluto
Part no. 501523
QuadraStone 140
grate
Azul Bahia
Part no. 501530
QuadraStone 140
grate
Rosso Verona
Part no. 501547
QuadraStone 140
grate
Verde Forest
Part no. 501554
QuadraStone 140
grate
Padang
Part no. 501561
*
QuadraStone 140
grate Individuell
Part no. 501509
Monogram 140
grate
Part no. 501158
Cut grate
Quadra 140 grate
Part no. 502315
Part no. 501226
*
*
Frame 120 x 120 with Dallmer Design grate 115 x 115
*
frame CKC 12
120 x 120 mm
stainless steel
+ plus
suitable
Design-grates
115 x 115 mm
*
*
Loire 115 Design
grate
Part no. 501615
Seine 115 Design
grate
Part no. 501622
Orinoco 115 Design Nil 115
grate
Design grate
Part no. 501639
Part no. 501646
Quadra 115 Design
grate
Part no. 501585
Monogram 115
grate
Part no. 501103
Saturn 115
grate
Part no. 502353
*
Yukon 115 Design
grate
Part no. 501653
Frame 120 diameter with Dallmer Design grate 115 diameter
+ plus
suitable
Design-grates
Ø 115 mm
Quadra Ø 115
Design grate
Part no. 502223
Aquarius 115
Design grate
Part no. 501806
colour coated grates on request
Dallmer GmbH + Co. KG · Wiebelsheidestraße 25 · 59757 Arnsberg · Germany · Tel. +49 2932 9616-0 · Fax +49 2932 9616-222
www.dallmer.de · export@dallmer.de
Dallmer Ltd · 4, Norman Way · Lavenham · Sudbury CO10 9PY · England · Tel: +44 1787 248-244 · Fax: +44 1787 248-246
www.dallmer.com · info@dallmer.com
02.2012.3650.2500(fa)
frame CKC 12 R
Ø 120 mm
stainless steel