See also : Per • form • ance (noun)

Ti • tan (noun)
Purpose built to extract water, the newest
member of the Titan family, the Titan H20
is a specialist in its field. HydraMaster
has designed this machine exclusively for
the professional water damage restoration
contractor. It has everything you need to
remove water, but it’s 75% easier to operate
than a traditional truckmount and required
50% less maintenance. The Titan H2O has
the power you need for major flood work
and water removal. WIth a liquid-cooled
32.5HP engine and over 400cfm, there’s
more than enough power to handle extralong hose reaches, you can run dual wands
and achieve quick drying times. Features
: Engine: 32.5 HP Kubota liquid cooled :
Ignition: Electric keyless start : Vacuum
Blower: Dominator™ 4007 Tri-Lobe,
HydraMaster exclusive design, 400+ cfm,
dual oil bath : Reference page 19.
System: Last-step chemical injection, meter
controlled : Heating System: Tube and fin
heat exchanger with ADC temperature
control : Reference page 12.
also see:
BOXXER XL : You get uncompromising
performance in a high-level, dual wand powerpacked truckmount from the Boxxer XL.
Incorporating time tested “best concepts”
in design and engineering provides builtin reliability. Yet the Boxxer XL provides
innovative and industry-first features that
place it on a level previously unachieved
for a machine in its class. Utilizing the
HydraMaster Water Conservation System,
it can be inactive under a full vacuum load
for as long as 40 minutes without wasting
fresh water. Whether you are setting up for
carpet cleaning, or doing water extraction
on a flood job, the “no-dump”/full bypass
heat exchanger system means your hot water
is used on the job, not dumped into the
recovery tank, saving precious fuel every
day. Reference page 11.
Per • form • ance (noun)
a : the higher level of which a mechanism
performs : b : the standard of excellence
in the execution of an action : c : the
fulfillment of a claim, promise or request
also see :
TITAN 575 (noun) : The Titan 575 is a Titan
among truckmounts. It allows you to run
two wands, so you can take on those bigger
cleaning jobs or you can get done twice as
fast. Incorporating the industry’s first true
water conservation system, it also can be
inactive under a full vacuum load for as
long as 40 minutes without dumping fresh
water. You can move furniture or apply
pre-conditioners without running to shut
off your machine, and your fresh water and
recovery tanks need to be filled and emptied
less often. Your hot water is used on the job,
not dumped into the recovery tank, saving
precious fuel each and every day. The Titan
575 was designed for reliability and
See also :
serviceability; removable magnetic panels
make maintenance a cinch! Features ; WG
972 Kubota 32.5HP liquid cooled : Ignition:
Electric keyless start : Vacuum Blower:
Competitor™ 4007 Tri-Lobe, HydraMaster
exclusive design, 400+ cfm, dual oil bath
: Pump: 4.0 gpm plunger pump, 1,200 psi
heated, 2,000 psi unheated (with optional
kit), electric clutch control Chemical
Boxx • er (noun) :
The Boxxer 318HP provides you with pressure
washing capabilities, but with the powerful
3006 Competitor SL Vacuum Blower, you
have waste water recovery capabilities no
pressure washer has. The powerful 1500
psi pressure is complimented by the fact the
water is heated without using a secondary
fuel source. Combined with the cleaning
power of a rotary extraction cleaning wand
like the HydraMaster RX20 or RX-15H, or
a stationary hard surface wand, you have
the capabilities to restoratively deep clean
even the dirtiest grout lines in a stone or tile
floor, without having to use labor intensive
brushes. Keep in mind though, the Boxxer
318HP is fully capable of performing a high
quality carpet cleaning job, meaning you
never have to turn down any potential work.
The Boxxer 318HP comes standard with the
HydraMaster RX-15H rotary hard surface
tool meaning you are equipped and ready to
clean on day one: Reference page 11.
also see:
BOXXER 423S : The Boxxer 423S takes
the proven track record of the industry’s top
selling truckmount, the Boxxer 421 to an
entire new level of reliability, durability, and
serviceability. The Boxxer 423S provides
more power through increased engine
horsepower and improves serviceability
by providing easier accessibility to crucial
components, including the heat exchanger.
The Boxxer 423S heat control system
automatically manages water heating –
allowing less water dumping, and gives more
consistent temperatures during intermittent
wand use; e.g., moving furniture while
cleaning. With heated solution of 1000psi,
you are ready for just about any cleaning job.
The magnetic pump clutch also allows flood
extraction jobs without needing fresh water
hookup to cool the pump. It is economical
to operate: with a compact design; is easier
to maintain; and is quieter. Best of all, it
comes with a proven track record of profit
making performance for your cleaning and
restoration company.
: Reference page 10.
also see:
BOXXER 318 : Finally, you don’t have to
put up with barely adequate performance to
get an affordable entry-level machine. The
Boxxer 318 takes the entry level truckmount
to new heights. It’s perfect for operators
who want to tackle residential and light
commercial cleaning without making a
major investment. The Boxxer 318’s heat
and pressure pack a big punch and you
can rely on it to continue running for a
long, long time. Features : Engine: 18 HP
Briggs & Stratton™ V-Twin Vanguard™
industrial series engine : Vacuum Blower:
Competitor® SL 3006 blower, low
vibration, pulsation and sound reduced,
dual oil bath lubrication, no grease fittings,
durable helical gear drive : Pump: 3.5 gpm
plunger pump, 1,000 operating psi, electric
clutch control : Chemical System: Stainless
steel last-step chemical injection, meter
controlled : Heating System: Finned tube
heat exchanger : Reference page 9.
2014-2015 Product Catalog
2
Performance comes standard.
Table of Contents
Why HydraMaster .. .... .... .... .... .... .... .... .... .... .4
Truckmounts - Direct Drive
CDS .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 5-6
Truckmounts - Slide-Ins
BOXXERS
Boxxer 318 .. ... . ... . ... . ... . ... . ... . ... . ... . ... . ... . 8
Boxxer 318HP .. ... . ... . ... . ... . ... . ... . ... . ... . ... . 9
Boxxer 423S .. .... .... .... .... .... .... .... .... .... . 10
Boxxer XL.. .... .... .... .... .... .... .... .... .... .... . 11
TITANS
Titan 575.. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 12
Titan H2O .. .... .... .... .... .... .... .... .... .... .... . 13
CleanMaster Chemical Solutions.. .... .... .... .... 14
Machine Comparison Features & Specs .. . 15-17
Accessories .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 18
RX-20 .. .... .... .... .... .... .... .... .... .... .... .... .... 19
Evolution Wands .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 20
Wands and Tools.. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 21
DriMaster 3 Upholstery Tool.. .... .... .... .... .... . 22
DuraFlow APO (Automatic Pump Out).. .... .... 22
Fresh Water Tanks .. .... .... .... .... .... .... .... .... 23
HydraCradle Tank.. .... .... .... .... .... .... .... .... . 24
Hose Reels.. .... .... .... .... .... .... .... .... .... 25-26
Van Accessories .. ... . ... . ... . ... . ... . ... . ... . .. 27-28
Hoses (Solution and Vacuum).. .. .. .. .. .. .. .. .. .. 29
Miscellaneous Accessories .. .... .... .... .... .... . 30
HydraMaster Warranty .. .... .... .... .... .... .... .... . 31
Contact Us
HydraMaster Headquarters:
11015 - 47th Ave. W.
Mukilteo, WA 98275
Toll Free:
1.800.426.1301
Phone:
425.322.0139
Toll Free Fax: 1.800.426.4225
Fax:
425.771.7156
Customer Service:
Toll Free:
1.800.426.1302
Phone:
425.322.0139
Toll Free Fax: 1.800.426.4225
Fax:
425.771.7156
parts@hydramaster.com
Sales:
Toll Free:
1.800.426.1302
Phone:
425.322.0139
Toll Free Fax: 1.800.426.4225
Fax:
425.771.7156
sales@hydramaster.com
Technical Support:
Toll Free:
1.800.426.1302
Phone:
425.322.0139
Toll Free Fax: 1.800.426.4225
Fax:
425.771.7156
techsupport@hydramaster.com
Testimonials.. ... . ... . ... . ... . ... . ... . ... . ... Back Cover
© 2014 HydraMaster
The information and images contained in this catalog
are the sole property of HydraMaster, and are protected
under U.S. Copyright Law. No part of this publication
may be stored, reproduced, transmitted, transferred
or distributed by any means (electronic, mechanical,
photocopying or otherwise) without the prior expressed
written permission of HydraMaster.
IMPORTANT NOTICE:
Specifications and information in this catalog are
subject to change without prior notice.
800.426.1301
www.hydramaster.com
3
Why HydraMaster?
The idea is not a new one. The concept of an extraction
machine so large, heavy and powerful that it is left
in a vehicle and operated with long hoses has been
successfully employed for over 41 years. The immense
labor saving benefit of these powerful cleaning units
makes them the top choice for professional carpet
cleaners. These owners/operators demand and receive
equipment which can cut time on the job, perform deeper,
more thorough cleaning and faster drying.
Years of experience have now elevated truckmount
technology and resulted in substantial gains in simplicity
and reliability. HydraMaster truckmounts are designed to
provide consistent high heat, powerful water recovery,
withstands the abuse of multiple operators and are much
easier to operate. Today, HydraMaster is the industry
leader in manufacturing truckmount cleaning systems,
accessories and chemicals.
For over 3 decades,
HydraMaster stands behind its products 100%. We
commit ourselves to providing our customers with the
highest quality products and unparalleled service.
WHY HYDRAMASTER?
If you’re looking for the right truckmount, there’s no better
choice than HydraMaster. We got our start back in 1971
and have been perfecting our machines ever since—
because a company doesn’t become a trusted leader
in the industry by offering anything less than the highest
performance possible.
Common words in our industry like “innovative”,
“performance” or “powerful” don’t carry much weight
without standing the test of time. Our machines continue
to out perform others and they’ve been doing it for over 40
years. Longevity is the key to reliability.
At HydraMaster, we’re so sure of our machines, we even
offer the best warranty in the business (2 years parts
& labor). We also support you with one of the largest
distributor networks and most experienced engineering
teams in the industry.
4
Performance comes standard.
You won’t find better customer support after the sale,
either. Whether you need parts or just an answer to a
question, you’ll be treated like you’re our only customer.
We also help you succeed in your business by offering
education and training programs. That’s because our goal
isn’t just to sell you the best machine money can buy.
We’re here to help you work smarter.
Nothing beats a HydraMaster!
HydraMaster machine owners enjoy the most
comprehensive warranty protection available in the
truckmount industry. All components, large or small are
included in the Warranty Plan, providing the owner with real
warranty coverage against any part failure, large or small.
Our machines are designed with a richness of detail and
with many labor-saving features. The elegant simplicity
of our design will always outperform more complicated
equipment in the long haul. While HydraMaster equipment
is extremely reliable and we endeavor to use only top
quality components, if a malfunction should occur you’ll
see why they call HydraMaster “Customer Friendly”. We
look forward to having you as a member of HydraMaster’s
family of satisfied machine owners.
Key Features
• Space saving design
• Superior heat performance
• Super-reliable, everyday performance
CDS™ 4.8 Features
The 4.8’s large capacity, 100 gallon MaxxAir recovery
tank delivers the convenience of continued, uninterrupted
cleaning. A newly designed easy-clean stainless steel
lint basket makes daily maintenance less of a chore. The
LED status panel tells the operator what’s going on with
the machine. The chemical jug holder keeps things looking
sharp.
DIRECT DRIVE TRUCKMOUNTS
The CDS™ Design Concept
The concept behind the design of the CDS is to provide
a powerful, reliable cleaning system that uses the power
and heat source already provided by the host vehicle. The
rugged and reliable engineering that has, for over two
decades, made the CDS the most popular van powered
system in the industry is taken to a new level with the CDS
4.8 Overdrive. The result is a vehicle that you can outfit
as you choose; with a complete custom interior package
including fresh water tank, reels, shelves, and accessories.
Space Saving
The CDS is designed to utilize the space between the
driver’s and passenger’s seats, preserving valuable cargo
space. This is made possible by positioning the blower and
pump between the seats, and the recovery tank behind
the seats, creating ideal weight distribution for greater
passenger safety, vehicle handling and performance. The
result: All the advantages of a powerful truckmount while
preserving your valuable cargo space. Utilizing minimal
space in a standard van, the CDS is a real space saver.
CDS™ Electronic Speed Control
ESC (Electronic Speed Control technology), has enabled
us to increase vacuum performance by 30% and reduce
fuel consumption to equal a mid-sized slide-in truckmount
at just 1.5 gallons per hour. From the standpoint of
economical operation, the CDS just makes sense!
Number One in User-Friendly Operation
The simple elegance of the CDS has made it the choice
of both independent operators and national cleaning
franchises. The simple-to-use, easy-to-maintain CDS
is well known in the cleaning industry for quick operator
training, low maintenance and easy repair.
Salsa™ CDS Models
Increase your heat 30-45° F
Finally, a van-powered machine that can keep up with
the heat of slide-in units! HydraMaster engineers have
perfected the water heating system that keeps you in the
heat - even when using two wands, or high-production tools
like the RX-20.
The optional Salsa is the hottest blower heat exchanger
on the market! The new CDS Salsa produces working
temperatures as high as 235°F*.
If you’ve been looking for a machine with the simplicity,
reliability and ease of operation of a direct drive and the
high heat of a slide-in, the CDS Salsa is the machine for
you!
*As tested in Ford installation. Other vehicles may vary.
Salsa for CDS 4.8 #079-074
800.426.1301
www.hydramaster.com
5
OverDrive™ Power Train Technology
•Low engine RPM design boosts vacuum and cfm performance
and lowers fuel consumption to only 1.5 gallons per hour.
Maximize Cargo Space
•The unique CDS space-saving design uses only 14 inches of
valuable rear cargo space.
HydraMaster Quality...Rugged and Reliable
• The industry’s favorite van powered system, chosen by independent
operators and national franchises.
Power Transfer Package
• Double U-Jointed Flexible Shaft
• Heavy Duty Electrically Activated Clutch
• Improved Reliability, Reduced Vibration
• Shaft-Capture Safety System
• High Temperature, High Performance Bearings
CDS 4.8
• #4007 Tri Lobe Blower
• Std Electric Clutch
• 1200 psi Pump
• Residential, Large Commercial
• Longer Hose Runs
• 400+ cfm
• 650 lbs
Optional Salsa increases
temperatures 30-45°
Standard Equipment
• Runtime hour meter
• Chemical flow meter
(0-10 gph)
• Chemical flow control valve
• Vacuum gauge
(0”-30” Hg)
• Solution pressure gauge
(0-1,500 psi)
• Solution pressure
adjustment
• Pre-wired pump-in switch
• Pre-wired APO Switch
• Fresh water inlet
• Water system drain valve
• Engine tachometer
(0-3,500 rpm)
• Electronic throttle control
• Electrical circuit protection
(resettable)
• Temperature control valve
• Solution pump switch
• 3 speed control
• CDS Power Transfer
package
6
• Front compartment
cowling & armrests
• Top-mounted gauge
cluster & control console
• Dual wand solution
connections
• Dual wand vacuum
connections
• Freeze guard system
• Safety wheel chocks
• One stainless steel wand
• 10 ft x 1 1/2” whip line
• 10 ft x 1 1/2” drain line
• Chemical jug holder
• 5 gallon chemical jug
• Operation & maintenance
manual
• Embroidered HydraMaster
jacket
• Van decal
• Solution Hose Length:
150 ft x 1/4”
• Vacuum Hose Length:
150 ft x 2”
Performance comes standard.
Dominator™ Tri-Lobe Blower
• HydraMaster Exclusive Design
• CDS 4.8 - 4007
• Pulsation and Sound Reduced
• No Grease Fittings, Oil Bath at Both Ends
• Helical Gear Drive
• Oil-Level Sight Windows
Plunger Water Pump
• 4 gpm Volume
• 1200 psi For Hard Floor Cleaning
• Smooth Operation 3-Stage Plunger Design
• Operator Adjustable Pressure
(0-1200 psi)
• Last-Step Chemical Pulse Pump
Last-Step Chemical
System
Equipped with a
stainless steel Chemical
Pulse Pump. Last-Step
Chemical Injection
means no chemicals
pass through the
water pump or heat
exchangers.
CDS Hose Pass Through Kit
Allows operation of unit with vehicle doors
closed and locked. Reduces noise by 30%.
# 078-381
A no-cost option, upon request.
One per machine.
VEHICLES: Please contact your HydraMaster
distributor for a list of vans/vehicles that are
appropriate for CDS installation.
Learn more,
scan here
800.426.1301
www.hydramaster.com
7
Learn more,
scan here
The 318 Dominates in its Class
Finally, you don’t have to put up with barely adequate
performance to get an affordable entry-level machine.
The Boxxer 318 takes the entry level truckmount to new
heights. It’s perfect for operators who want to tackle
residential and light commercial cleaning without making
a major investment. The Boxxer 318’s heat and pressure
pack a big punch and you can rely on it to continue
running for a long, long time. It’s an ideal marriage of
high performance and an affordable price.
Briggs & Stratton®
Vanguard™ Engine:
•
•
•
•
Key Features:
Competitor® SL 3006 Blower
• Affordable, entry level machine
• Compact, road tested design
• Hard surface cleaning at 1,000 psi
• Easy Maintenance, high reliability
• Quiet operation
Standard Equipment:
• Runtime hour meter
• Chemical flow meter
(0-10 gph)
• Chemical flow control
valve
• 5 gallon chemical jug
• Vacuum gauge (0-30” Hg)
• Solution pressure gauge
(0-1,500 psi)
• Solution pressure
adjustment
• Pre-wired pump-in switch
• Pre-wired APO Switch
• Fresh water inlet
• Water system drain valve
• Stainless steel carpet
cleaning wand
• Engine choke
• Engine throttle
• Electrical circuit protection
• Solution temperature
control selector
8
Solution Hose Length:
100 ft x 1/4”
Vacuum Hose Length:
100 ft x 2”
Wand Whip Line: 10 ft
1-1/2”
• 50 ft water supply line
• Recovery Tank: 65 gallon
MaxxAir™ recovery tank
• Battery box
• Van installation kit
• Operation & maintenance
manual
•Embroidered
HydraMaster jacket
•
•
•
•
•
•
•
Performance comes standard.
Fuel-efficient 18 HP engine
Reliable 2 cylinder OHV design
Keyed ignition
Easy maintenance
Hardened, precision helical gears
Double row ball bearings at gear end
Precision machined ductile iron rotors
Dual oil bath design with oil level sight
windows
High Pressure Pump:
• 3.5 gpm capacity
• Operating pressure, 0 to 1,000 psi
• Clean carpet and hard surfaces
Optional Equipment:
•Dura-Flow™ APO
(auto pump-out) is externally
mounted for easy service, no
filters required
•RX-20™ rotary extraction tool
•DriMaster™ 2 upholstery tool
• Rotomoldeded 70 gallon
fresh water tank
• Thru-floor exhaust kit
Machine Specifications:
•
•
•
•
•
•
•
•
Dimensions: 24”W x 31”H x 36”D
Weight: 570 lbs
Ignition: Electric key start
Chemical System: last-step
chemical injection, meter
controlled
Heating System: Finned tube
heat exchanger. 215°F
Wand Capacity: Single
Fuel Consumption: 1.0 gph
Uses: Residential and Light
Commercial
The Boxxer 318HP is a dedicated hard surface cleaning and
pressure washing truckmounted extractor designed specifically to
provide heated water at pressures up to 1500 psi, yet affordable
enough to start your business or add to your carpet cleaning fleet.
With the residential market share for carpet as a floor covering
having fallen by 25-30% in the last 5 years, the market for
restorative cleaning of tile, stone, and concrete floors is growing
larger every year.
The Boxxer 318HP is equipped with several exclusive features
which make it ideal for dedicated hard surface cleaning. First, the
chemical solution pump is constructed of stainless steel (Most
truckmount chemical solution pumps are brass) with an integrated
shut-off valve to deal with the higher pressures typically associated
with hard surface cleaning. Secondly, a specially engineered
heater coil is used to withstand the rigors of constant high pressure
cleaning applications (up to 1500psi.) Finally, keeping the hot water
flowing (180-210°F) even at higher pressures allows you to take
advantage of the cleaning power of hot water to reduce chemical
usage.
Learn more,
scan here
Briggs & Stratton®
Vanguard™ Engine:
The Boxxer 318HP provides you with pressure washing
capabilities, but with the powerful 3006 Competitor SL Vacuum
Blower, you have waste water recovery capabilities no pressure
washer has. The powerful 1500 psi pressure is complimented by
the fact the water is heated without using a secondary fuel source.
Combined with the cleaning power of a rotary extraction cleaning
wand like the HydraMaster RX20 or RX-15H, or a stationary hard
surface wand, you have the capabilities to restoratively deep clean
even the dirtiest grout lines in a stone or tile floor, without having
to use labor intensive brushes. Keep in mind though, the Boxxer
318HP is fully capable of performing a high quality carpet cleaning
job, meaning you never have to turn down any potential work. The
Boxxer 318HP comes standard with the HydraMaster RX-15H
rotary hard surface tool meaning you are equipped and ready to
clean on day one.
Standard Equipment:
• RX-15H Rotary Hard
Surface Cleaning Wand
• Runtime hour meter
• Chemical flow meter
(0 -10gph)
• Solution Hose Length:
100ft X 1/4” High
Pressure hose
• Chemical flow control
valve
• Vacuum Hose Length:
100 ft x 2”
• 5 gallon chemical jug
• Wand Whip Line:
10 ft, 1.5”
• Vacuum gauge (0-30” Hg)
• Solution pressure gauge
(0-1500psi)
• 50 ft. water supply line
• Recovery Tank: 65 gallon
Maxx-Air®
• Solution pressure
adjustment
• Battery box
• Pre-wired pump-in switch
• Van installation kit
• Pre-wired APO Switch
• Operation & maintenance
• Fresh water inlet
• Water system drain valve
• Stainless steel carpet
cleaning wand
• Engine choke
• Engine throttle
• Electrical circuit
protection
• Embroidered
HydraMaster jacket
•
•
•
•
•
•
Fuel-efficient 18 HP engine, 1.0 GPH
Reliable 2 cylinder OHV design
Fuel efficient
Keyed ignition
Easy maintenance
3 year limited warranty
Competitor™ SL 3006 Blower
•
•
•
•
Hardened, precision helical gears
Double-row ball bearings at gear end
Precision machined ductile iron rotors
Dual oil bath design with oil level sight
windows
High Pressure Pump:
• 3.5 gpm capacity
• Operating pressure, 0 to 1,500 psi
• Clean carpet, stone, tile and concrete floors,
hard surfaces and pressure wash
Optional Equipment:
•Dura-Flow™ APO
(auto pump-out) is externally
mounted for easy service, no
filters required
•RX-20™ rotary extraction tool
•DriMaster™ 3 upholstery tool
• 70 Gallon molded underbelly
fresh water tank
• Thru-floor exhaust kit
800.426.1301
Machine Specifications:
•
•
•
•
•
•
•
•
Dimensions: 24”W x 31”H x 36”D
Weight: 570 lbs
Ignition: Electric key start
Chemical System: last-step
chemical injection, meter controlled
Heating System: Finned tube heat
exchanger with stainless steel
tubes. 210°F
Wand Capacity: Single
Fuel Consumption: 1.0 gph
Uses: Residential and Light
Commercial
www.hydramaster.com
9
™
The Boxxer 423S takes the proven track record of the industry’s top
selling truckmount, the Boxxer 421 to an entire new level of reliability,
durability, and serviceability. The Boxxer 423S provides more power
through increased engine horsepower and improves serviceability
by providing easier accessibility to crucial components, including the
heat exchanger.
The Boxxer 423S has also reduced noise by optimizing airflow with the
OPTI-AIR™ flow system through the entire machine which provides
more consistent heat performance and makes the machine quieter
in operation. You can clean everything from the filthiest carpet, to the
most delicate upholstery fabric, to the grimiest tile or concrete floor.
Shown with optional 70 gallon
sub-mount fresh water tank.
The Boxxer 423S heat control system automatically manages water
heating – allowing less water dumping, and gives more consistent
temperatures during intermittent wand use; e.g., moving furniture
while cleaning. With heated solution of 1000psi, you are ready for
just about any cleaning job. The magnetic pump clutch also allows
flood extraction jobs without needing fresh water hookup to cool the
pump. It is economical to operate: with a compact design; is easier
to maintain; and is quieter. Best of all, it comes with a proven track
record of profit making performance for your cleaning and restoration
company.
Easier, Quieter, and Ready for Your Greatest Cleaning Challenge
Key Features:
• Based on the proven track record of the industry’s top selling truckmount
• More power through increased engine horsepower
•235°F Maximum Temperature
• Compact design maximizes available floor space in van
• Improved serviceability by providing easier accessibility to crucial components,
•OPTI-AIR™ flow system makes the machine quieter
• Heat control system provides for less water usage (reduced bypass dumping)
and more consistent temperature performance during intermittent wand use
Briggs & Stratton® Vanguard™ Engine
• 23 HP
• 1.1 gph Fuel Consumption
• Dependable 2 Cylinder OHV Design
• Fuel-Efficient Technology
• External Oil Cooler
• Keyed ignition
• Engine choke and Throttle
Applications:
• Residential and Commercial Carpet Cleaning
• Pressure Washing with full waste recovery capabilities
• Upholstery Cleaning
• Concrete, stone, tile and grout cleaning
• Water extraction
4005 Dominator™ Tri-Lobe Blower
• Tuthill 4005 Tri-Lobe Blower
• HydraMaster Exclusive Design
• Direct Coupler Driven
• Pulsation and Sound Reduced
• No Grease Fittings
• Dual Oil Bath Design with Sight Level Windows
• Durable Helical Gear Drive
Machine Specifications:
• Dimensions: 24” W x 32” H x 36” D
• Weight: 563 lbs (console only)
• Chemical System: last-step chemical injection, meter controlled
• Wand Capacity: Single
Gauges and System Monitoring:
Runtime hour meter • Vacuum gauge (0-30” Hg) • Solution (Chemical)
flow meter (0-10gph) • Solution (Chemical) flow control valve • Solution
pressure gauge (glycerin filled) • Solution pressure adjustment • Pre-wired
pump-in switch • Pre-wired Automatic Pump-Out (APO) switch • Fresh
water inlet • Water system drain valve • Diverter valve (with ADC control)
• Diverter/clutch package for flood work • Electrical circuit protection •
Pump clutch switch • Solution temperature control
10
Performance comes standard.
Solution Pump
• 4.0 gpm Plunger Pump Operating at 1,000 PSI
• 4.0 Gallon Per Minute Flow Capacity
• Operating Pressure, 0 to 1,000 PSI
• Electric Clutch
• Stainless Steel Chemical Pump
Heat Exchanger
• Divert tube and fin heat exchanger system
•240°F Maximum Temperature
Learn more about the
NEW Boxxer 423s
scan here
You get uncompromising performance in a high-level, dual wand powerpacked truckmount from the Boxxer XL. Incorporating time tested “best
concepts” in design and engineering provides built-in reliability. Yet the
Boxxer XL provides innovative and industry-first features that place it
on a level previously unachieved for a machine in its class. Utilizing the
HydraMaster Water Conservation System, it can be inactive under a
full vacuum load for as long as 40 minutes without wasting fresh water.
Whether you are setting up for carpet cleaning, or doing water extraction
on a flood job, the “no-dump”/full bypass heat exchanger system means
your hot water is used on the job, not dumped into the recovery tank,
saving precious fuel every day.
The Boxxer XL also sets a new standard for quieter operation due to
innovative concepts and design in routing and controlling the flow of
blower air and exhaust gas. The Boxxer XL produces a decibel level
of 68dB (at industry standard measurements of 12” Hg, 1.6 gpm water
flow with closed doors). This is equivalent to the noise level previously
only available with clutch drive, direct drive systems. The Boxxer XL is
20% quieter than a comparable slide-in truckmount.
Finally, the Boxxer XL produces performance levels that most
truckmounts only dream about – True dual wand capabilities; 400+CFM
(static measurement), attains 245°F temperature (185°F continuous
flow at 1.25 gpm); and proven and tested coupler direct driven blower.
A time tested and proven frame and drive system reduces vibration and
wear on componentry. Accessibility and serviceability with removable
magnetic panels makes maintenance a breeze.
31 HP + 400+ CFM + 1200 psi hot + 245 º F
Key Features:
•
•
•
•
•
XS Footprint - More space in your van
XS Noise - 68 dB, 20% quieter than comparable slide-ins
XS Water use - HydraMaster water conservation system
Best price point for its class
Easy Maintenance, high reliability
Briggs & Stratton®
Vanguard™ Engine:
•
•
•
•
Fuel-efficient 31 HP engine, 1.6 GPH
Fuel efficient
Keyed ignition
Easy maintenance
Applications:
•
•
•
•
•
Residential, Large Commercial Carpet Cleaning
Pressure Washing with full waste recovery capabilities
Upholstery Cleaning
Stone, Tile and Grout Cleaning
Hard surface high pressure cleaning
4007 Dominator™ Tri-Lobe Blower
• HydraMaster exclusive design
• Dual oil bath design with sight level
windows
• Durable helical gear drive
Machine Specifications:
•
•
•
•
Dimensions: 24”W x 39”H x 41”D
Weight: 800 lbs
Ignition: Electric key start
Chemical System: last-step chemical injection, meter
controlled
• Heating System: Full divert tube heat exchanger with
stainless steel tubes. 245°F
• Wand Capacity: Dual
High Pressure Pump:
• 1,200 psi unheated pressure
• 4.0 gpm volume
• 1,200 psi heated pressure
800.426.1301
www.hydramaster.com
11
Power, Innovation & Reliability
The Titan 575 is a titan among truckmounts. It allows you
to run two wands, so you can take on those bigger cleaning
jobs and you can get done twice as fast. Incorporating the
industry’s first true water conservation system, it also can
be inactive under a full vacuum load for as long as 40
minutes without wasting fresh water. That means you can
move furniture or apply pre-conditioners without running to
shut off your machine, and your fresh water and recovery
tanks need to be filled and emptied less often. Your hot
water is used on the job, not dumped into the recovery tank,
saving precious fuel each and every day. The Titan 575
was designed for reliability and serviceability; removable
magnetic panels make maintenance a cinch. For extreme
performance in a compact and reliable package, the Titan
575 has got your back!
Learn more,
scan here
Kubota® 32.5 HP Liquid Cooled
Engine:
• Keyless electronic ignition
• Exceptionally rigid cast iron block
• 3 cylinder OHV design
• Fuel-efficient technology, 1.7 gph at
300 psi
4007 Dominator™ Tri-Lobe Blower
• HydraMaster exclusive design
• Dual oil bath design with sight level
windows
• Durable helical gear drive
Key Features:
• Industry’s first Water Conservation System
• 2,000 psi unheated (with optional kit)
• Dual wand capable
• High, consistent working temperatures up to 265°F
• Easy maintenance, high reliability
• Electrical circuit protection
Standard Equipment
• Pump clutch switch
• Runtime hour meter
• Solution temperature
• Chemical flow meter
control selector
(0-10 gph)
• Two solution outlets
• Chemical flow control valve
• Solution Hose Length:
• 5 gallon chemical jug
100 ft x 1/4”
• Vacuum gauge (0-30” Hg)
• Vacuum Hose Length:
• Solution pressure gauge
100 ft x 2”
(0-1,500 psi)
• Solution pressure adjustment • Wand Whip Line: 10 ft
1-1/2”
• Pre-wired pump-in switch
• 50 ft water supply line
• Pre-wired APO Switch
• Recovery Tank: 70 gallon
• Fresh water inlet
MaxxAir™ recovery tank
• Water system drain valve
• Battery box
• Stainless steel carpet
• Van installation kit
cleaning wand
• Operation & maintenance
• Diverter valve (with ADC
manual
heat control)
• Embroidered HydraMaster
• Diverter/clutch package for
jacket
flood work
12
Performance comes standard.
High Pressure Pump:
• 2,000 psi unheated pressure
• 4.0 gpm volume
• 1,200 psi heated pressure
Optional Equipment:
• Dura-Flow™ APO
(auto pump-out)
• 100 gallon MaxxAir™ recovery
tank, alum inum powder coated
• 2,000 psi pressure washing kit
• Thru-floor exhaust kit
• 85 gallon rotomolded fresh
water tank
• Evolution Truckmount Wand
• RX-20 rotary carpet extractor
Machine Specifications:
•
•
•
•
•
•
•
•
Dimensions: 26”W x 39”H x 45”D
Weight: 900 lbs
Ignition: Electric keyless start
Chemical System: last-step
chemical injection, meter controlled
Heating System: Tube and fin heat
exchanger with ADC temperature
control, max. temp. 265°F
Wand Capacity: Dual
Fuel Consumption: 1.7 gph
Uses: Residential and Large
Commercial
Purpose Built for
Restoration and Flood Work
Purpose built to extract water, the newest member of
the Titan family, the Titan H2O, is a specialist in its field.
HydraMaster has designed this machine exclusively for
the professional water damage restoration contractor. It
has everything you need to remove water in a hurry, but
it’s 75% easier to operate than a traditional truckmount
and requires 50% less maintenance.
Learn more,
scan here
Kubota® 32.5 HP Liquid Cooled
Engine:
• Keyless electronic ignition
• Exceptionally rigid cast iron block
• 3 cylinder OHV design
• Fuel-efficient technology, 1.7 gph at
300 psi
The Titan H2O has the power you need for major flood
work and water removal in a hurry. With a liquid-cooled,
32.5HP engine and over 400+ cfm, there’s more than
enough power to handle extra-long hose reaches with
dual wands to achieve quick drying.
4007 Dominator™ Tri-Lobe Blower
Key Features:
• HydraMaster exclusive design
• Dual oil bath design with sight level
windows
• Durable helical gear drive
• Purpose built for water and flood extraction
• Simplified design for easy maintenance
• Dual wand capable
• Simple and reliable
• Powerful vacuum, with proven performance
Standard Equipment
• Runtime hour meter
• Vacuum gauge (0-30” Hg)
• Pre-wired APO Switch
• Engine choke
• Engine throttle
• Electrical circuit protection
• Vacuum Hose Length:
100 ft x 2”
• Wand Whip Line: 10 ft 1-1/2”
• Recovery Tank: 100 gallon
MaxxAir™ recovery tank
• Battery box
• Van installation kit
• Operation & maintenance manual
• Embroidered HydraMaster jacket
Optional Equipment:
• Evolution Flood Wand
• Dura-Flow Auto Pump-Out
(APO)
800.426.1301
Machine Specifications:
•
•
•
•
•
•
Dimensions: 26”W x 39”H x 45”D
Weight: 775 lbs
Ignition: Electric keyless start
Wand Capacity: Dual
Fuel Consumption: 1.8 gph
Uses: Residential and Large
Commercial
www.hydramaster.com
13
Choosing the right cleaning
solution can make YOU the hero.
The Genesis of A New Clean
There are a lot of different organizations who seem to want to be involved in how carpet cleaning
chemicals are made these days. Carpet manufacturers, product and “green” certification groups,
and industry training organizations all seem to have sottmething to say, as well as recommended
or required “guidelines.” Many cleaning solution manufacturers have bent over backwards and
changed formulations trying to “fit-in.”
At HydraMaster, our CleanMaster brand of cleaning solutions march to the orders of a more important
boss when it comes to our formulations – you, the professional cleaner and restorer. You have to
answer first and foremost to your customers. You are judged primarily by how well you improve the
appearance of the carpet, upholstery, or hard surface; and how long it stays clean after you have left.
Your customer needs to be thrilled by how effective you are and nothing beats the “ol’ eyeball test.”
Sure, CleanMaster formulates cleaning solutions that allow you to clean faster, dry faster, and resist
rapid resoiling. It considers the input and guidelines of industry stakeholders. But we formulate
solutions primarily for you. When we can help make YOU the HERO with your customer, we know
we have done our job.
The Genesis of a New Clean
CleanMaster Solutions from HydraMaster are specifically formulated to meet the demanding and often
grueling needs of the professional carpet cleaner and restorer. Since we make the equipment, we
formulate products that will synergistically work most effectively at cleaning, while protecting your
equipment investment.
At the same time, the chemists and product development folks at CleanMaster know they have to
develop cleaning products that provide their customers with industry leading technology and
performance when it comes to cleaning effectiveness, appearance improvement, preventing
re-soiling, and reducing overall drying times.
For your free copy of our complete CleanMaster Chemical Solutions catalog,
Call 1-800-426-1301 or log onto www.hydramaster.com
facebook.com/cleansolutions
youtube.com/hydramastertv
www.hydramaster.com
All CleanMaster Solutions are backed by the industry's
first risk-free problem-solving guarantee. If you are
not completely thrilled with the performance of a
CleanMaster solution, we'll give you a product that does.
800.426.1301
www.hydramaster.com
15
HydraMaster Truckmounts
CDS 4.8
Engine
Vehicle
Ignition
Vehicle
18 HP Briggs & Stratton industrial
V-Twin Vanguard industrial series
engine
Electronic key start
Boxxer 318HP
18 HP Briggs & Stratton industrial
V-Twin Vanguard industrial series
engine
Electronic key start
Vacuum Blower
Dominator® 4007 Tri-lobe, Hydra
Master exclusive design, 400+ cfm
Competitor® SL 3006
260+ cfm
Competitor® SL 3006
260+ cfm
Water Pump
Plunger pump, 1200 operating psi,
electric clutch control
Plunger pump, 1000 operating psi
Tri-plunger pump, 1500 operating psi
Chemical System
Last-step chemical injection, meter
controlled
Last-step chemical injection, meter
controlled
Last-step chemical injection, meter
controlled
Heating System
Engine heat recovery, multi-parallel
heat exchanger system, optional salsa
heat package
Finned tube heat exchanger
Finned tube stainless steal heat
exchanger
Standard on All Machines: Runtime
hour meter; Chemical flow meter, 0-10
GPH; Chemical flow control valve;
Vacuum gauge, 0-30" Hg; Solution
pressure gauge, liquid filled, 0-1500
psi; Solution pressure adjustment;
Pre-wired pump-in switch; Pre-wired
APO switch; Fresh water inlet; Water
system drain valve. All machines
(except Titan H2O) come with a carpet
cleaning wand.
Additional instruments: Engine
tachometer 0-3500 RPM; Electronic
throttle control; Solution pump switch;
Electrical circuit protection, resettable;
Pump clutch switch; Solution
temperature control selector; Dual
solution outlets
Additional instruments: Diagnostic/
status lights; Engine choke; Engine
throttle; Electrical circuit protection,
resettable; Solution temperature
control selector
Additional instruments: Diagnostic/
status lights; Engine choke; Engine
throttle; Electrical circuit protection,
resettable; Solution temperature
control selector
Recovery Tank
100 gallon MaxxAir™ recovery tank;
aluminum, epoxy finish, easy-clean
sloped bottom, stainless steel filter and
filter basket. 48-1/2”L x 14-1/4”W 381/2”H, 125 lbs.
65 gallon MaxxAir™ recovery tank;
aluminum, epoxy finish,
stainless steel filter and filter basket.
36-3/4”L x 10-1/2”W x 39-1/2”H, 80
lbs.
70 gallon MaxxAir™ recovery tank;
aluminum, epoxy finish,
stainless steel filter and filter basket.
36-3/4”L x 10-1/2”W x 39-1/2”H, 80
lbs.
Solution Hose
150’ x 1/4”
100’ x 1/4”
100’ x 1/4”
Vacuum Hose
150’ x 2”,
10’ x 1-1/2” whip line
100’ x 2”,
10’ x 1-1/2” whip line
100’ x 2”,
10’ x 1-1/2” whip line
Frame/Dimensions
23”W x 41.5”H x 61”D, steel, baked-on
powder-coated epoxy finish, 650 lbs.
(tank/console only)
24”W x 31”H x 36”D,
steel, baked-on powder-coated epoxy
finish, 570 lbs.
(machine console only)
24”W x 31”H x 36”D,
steel, bak ed-on powder-coated epoxy
finish, 570 lbs.
(machine console only)
Fuel Consumption
300 psi / 12” Hg
1.5 gph
1.0 gph
1.0 gph
215°F
215°F
Single
Single
Temperature
*Under optimum conditions
Chevy 190°F w/Salsa up to 230°F;
Ford 205°F w/Salsa up to 245°F
Wand Capacity
16
Boxxer 318
Performance comes standard.
Dual
Machine Comparison Chart
Boxxer 423s
Vanguard™ 21 HP, 2 cylinder Briggs &
Stratton industrial series engine
Electronic key start
Boxxer XL
31 HP, Briggs & Stratton™ V-Twin
Vanguard™ industrial series engine
Electric key start
Titan 575
Titan H2O
32.5 HP Kubota™ liquid cooled, rigid
iron block.
32.5 HP Kuboda™ liquid cooled, cast
iron block.
Electric keyless start, electric governor
Electric keyless start, electric governor
Dominator® 4007 Tri-Lobe, 400+ cfm
HydraMaster exclusive design
Dominator® 4005 Tri-lobe, 300+ cfm
HydraMaster exclusive design
Dominator® 4007 Tri-Lobe, 400+ cfm
HydraMaster exclusive design
Dominator® 4007 Tri-Lobe, 400+ cfm
HydraMaster exclusive design
Plunger pump, 1000 operating psi,
electric clutch control
Plunger Pump with 1200 operating
psi, 1200 psi unheated, electric clutch
control
Plunger Pump with 1200 operating
psi, 2000psi unheated, electric clutch
control
N/A
Last-step chemical injection, meter
controlled
Last-step chemical injection, meter
controlled
Last-step chemical injection, meter
controlled
N/A
Stainless steel coil exhaust heat
exchanger, finned tube heat
exchanger
Full divert tube and finned tube heat
exchanger with ADC temperature
control
Full divert tube and finned tube heat
exchanger with ADC temperature
control.
Coolant heat exchanger
N/A
Additional instruments: Diagnostic/
status lights; Diverter valve (with ADC
heat control); Diverter/clutch package
for flood work; Solution pump switch;
Engine choke; Engine throttle;
Electrical circuit protection, resettable;
Solution temperature control selector
70 with option 100 gallon MaxxAir™
recovery tank; aluminum, epoxy
finish, easy-clean sloped bottom,
stainless steel filter and filter basket.
70 Gal: 36-3/4”L x 14-1/4”W x 381/2”H, 100 lbs. 100 Gal: 48-1/2”L x
14-1/4”W x38-1/2”H, 125 lbs.
100’ x 1/4”
Additional instruments: Diagnostic/
status lights; Diverter valve (with ADC
control); Diverter/clutch package for
flood work; Electrical circuit protection;
Pump clutch switch; Solution
temperature control selector; Two
solution outlets
Additional instruments:
Diagnostic/status lights; Diverter valve
(with ADC heat control); Diverter/
clutch package for flood
work; Electronic throttle control;
Electrical circuit protection; Pump
clutch switch; Solution temperature
control selector; Two solution outlets
Additional instruments:
Diagnostic/status lights; Diverter/
clutch package for flood work;
Electronic throttle control; Electrical
circuit protection
70 with optional 100 gallon MaxxAir™
recovery tank; aluminum epoxy finish,
easy clean sloped bottom, stainless
steel filter and filter basket. 70 Gal: 363/4”L x 14-1/4”W x 38-1/2”H, 100 lbs.
100 Gal: 48-1/2”L x 14-1/4”W x 381/2”H; 125 lbs.
70 with optional 100 gallon MaxxAir™
recovery tank; aluminum epoxy finish,
easy clean sloped bottom, stainless
steel filter and filter basket. 70 Gal: 363/4”L x 14-1/4”W x 38-1/2”H, 100 lbs.
100 Gal: 48-1/2”L x 14-1/4”W x 381/2”H; 125 lbs.
100 gallon MaxxAir™ recovery tank;
aluminum epoxy finish, easy clean
sloped bottom, stainless steel filter
and filter basket. 100 Gal: 48-1/2”L x
14-1/4”W x 38-1/2”H; 125 lbs.
100’ x 1/4”
100’ x 1/4”
N/A
100’ x 2”,
10’ x 1-1/2” whip line
100’ x 2”,
10’ x 1-1/2” whip line
100’ x 2”,
10’ x 1-1/2” whip line
100’ x 2”,
10’ x 1-1/2” whip line
24”W x 32”H x 36”D,
steel, baked-on powder-coated epoxy
finish, 709 lbs.
(machine console only)
24”W x 39”H x 41”D, steel, baked-on
powder-coated epoxy finish,
800 lbs.
(machine console only)
26”W x 39”H x 45”D, steel, baked-on
powder-coated epoxy finish,
900 lbs.
(machine console only)
26”W x 39”H x 45”D, steel, baked-on
powder-coated epoxy finish,
775 lbs.
(machine console only)
1.2 gph
1.6 gph
1.7 gph
1.8 gph
240°F
245°F
265°F
N/A
Single
Dual
Dual
Dual
800.426.1301
www.hydramaster.com
17
18
Performance comes standard.
Key Features
•Aggressive restorative extractor tool for carpet, hard
surface and bonnet cleaning
• Labor-saving, ergonomic design
•Superior agitation for cleaning stains, heavily soiled
and matted carpet
• Durable construction for long life
• Reduces fatigue of the operator
• For truckmount or portable carpet cleaning systems
RX-20 hard floor heads for tile and grout cleaning
The RX-20 hard floor head opens new possibilities for your
cleaning operation. You can clean a homeowner’s tile floor
or concrete with 1,000 psi and get the agitation of a brush
all in one head. Now you can spray, brush and extract…all
in one machine.
Rotary Jet Carpet Extraction®
Bonnet Cleaning
Hard Floor Cleaning
The RX-20™ is a tool every cleaner should have - The
amazing RX-20 Rotary Jet Extractor® has revolutionized
the way carpets are cleaned. With 3 spray jets, matched
with 5 vacuum slots, the RX-20 makes over 650 cleaning
passes per minute (calculation based on 5 jets, with only
3 jets, cleaning passes per minute is 390). This incredible
scrubbing action releases soils while fluffing up and
restoring carpet life.
Clean more carpet with less effort - Because the
RX-20 is not operator dependent, it delivers more cleaning
all day long, regardless of the operator. A slight change
of balance on the RX-20’s handle allows the operator to
clean in a side-to-side motion, with little or no effort.
Consistent quality cleaning,
all day long - Customers will be
impressed with the high-tech approach
to cleaning the RX-20 produces,
setting your operation apart from those
using only a wand. Clean with less
effort, get better results… and make
more money.
“This is the correct
way to clean a carpet
and the only way
we do it” Mike M.,
McMinnville, OR
RX-20 Pad and Bonnet Driver
Quickly convert to drive either carpet
cleaning bonnets or standard hard floor pads
Item# 190-041-020
RX-20 Hard Floor Attachment - LD
Light Duty to medium duty cleaning of
stone,slate, terrazzo, ceramic tile, grout
and sealed concrete floors
Item# 190-041-024
RX-20 Hard Floor Attachment –MD
Medium Duty to aggressive scrubbing
of resilient floors,terrazzo, quarry tile,
ceramic tile, grout and concrete floors
Item# 190-041-026
RX-20 Hard Floor Attachment – HD
Heavy Duty to most aggressive scrubbing
of resilient floors, terrazzo, quarry tile and
concrete floors.
Item# 190-041-025
RX Mounting Bracket
Keep your RX-20 secured in your van
with our custom mounting brackets.
Simply set the wheels of the extractor
in the bracket and your machine will
stay in place. Item# 163-018
“The RX-20
ROCKS!”
Robert F, Las
Vegas NV
“It is like that famous battery
bunny. It just keeps going and
going and going. It doesn’t tire out
even after I have, which means I
clean consistently the same way
throughout the job and the day.”
Bruce D.
800.426.1301
Learn more,
scan here
www.hydramaster.com
19
Evolution Wands
The Evolution Wand is truly the next evolution in wand design
and performance. The Aluminum tube and Rotomoldeded
head make it extremely lightweight helping reduce fatigue on
the technician. The sealed Delrin® glides help push the wand
across the carpet, and are tapered to keep a good seal on the
fibers.
No other tool has made such a dramatic increase in soil
removal and water recovery. The laminar airflow design of
the Evolution wand has boosted the performance of some
portable extractors from a bronze to a gold level of certification
from the Carpet and Rug Institute’s Seal of Approval Program
for tested cleaning performance. The Evolution will change
the way carpets are cleaned.
Available in two sizes: a 12” head with 1-½” tube and two jets
or a high production 16” head with 2” tube and 6 jets.
Only 8.8 lbs
Evolution Carpet Wands
Half the weight, twice the performance.
The Evolution is not your standard wand.
Only 6.5 lbs
2” Tube, 16” Head, 6 Jets
2” Evolution Truckmount Wand
Item #163-035
16”
1-1/2” Tube, 12” Head, 2 Jets
1-1/2” Evolution Wand
Item #163-034
13”
Learn more,
scan here
20
Performance comes standard.
Wands and Tools
1½” HydraHoe Carpet Cleaning Wand
Glides over carpet without chattering! 12” wide
head increases production. High temperature,
high pressure, stainless steel fabrication,
stainless valve, quick coupler and
assist handle.
Item #163-020
1½” S-Bend Two Jet Wand
This 12” wide S-Bend wand has two jets.
It uses a 1½” tube and glides over the carpet
for easy operation.
Item #100-011-106
Rotary Jet Extraction®
Hard Surface Cleaning Tool
RX-15H
UT-40 Utility Cleaning Tool
An all purpose tool for cleaning carpeted
divider panels, under resturant booths,
landings, stairs and hard to reach carpeted
areas. All stainless construction, 9” wide
head and 40” long shaft allows operator
to “stand-up” when cleaning stairs.
The RX-15H allows you to clean tile,
stone, and concrete floors faster
and easier and better than any other
cleaning tool or system. It will clean
circles around other rotary extractor
tools, too! Ergonomic Design.
Easier to use. Easier to maintain.
Item #163-008
Item #163-315
UT-14 Truckmount Stair Tool
The best stair tool on the market today.This
tough stainless steel hand tool is 14” long
with 6” wide cleaning head and stainless steel
valve with quick coupler, assist handle.
Item #163-009
RX-7H
The RX-7H Hand-Held Hard Surface
Cleaning Tool has the same
high-pressure rotary cleaning action of
the RX-15H, but it is concentrated into a
7” diameter cleaning diameter.
Item #163-307
800.426.1301
www.hydramaster.com
21
Accessories
The new DriMaster 3 Upholstery Cleaning Tool maintains
the proven ergonomic design, cleaning performance
and engineering achievements of the DriMaster
2 Upholstery Cleaning Tool. At the same time,
feedback from cleaning technicians just like you
has led to several exciting enhancements to
the product.
• MOLDED GLIDES on the tool lips means a
smoother surface with nothing to wear out virtually
eliminating any chance of fabric snagging
• The tool is easy to clean out and even easier
to service! Just undo four screws and remove
the nose cone for complete access. Push to
connect fittings between the valve and bar jet
allow for cleaning access and easy replacement.
• If nose cone gets dropped, cracked or chipped, just
replace the nose cone. This extends the useful life of
your tool for long term profitable cleaning.
Optional Handle Assembly
• Enhances grip and function for high
productivity cleaning on stackable
chairs, theatre seats and more.
• Ergonomic design for less fatigue
Learn more,
scan here
DriMaster 3 Tool Part# 163-220
DriMaster 3 Accessory Handle Kit Part# 061-144
Optional Dura-Flow™ APO
HydraMaster’s APO is built for reliability. It is externally mounted for easy
serviceability. This vertical mounting design protects the APO assembly from damage
and preserves valuable van floor space.
The Dura-Flow APO is engineered to produce a 4.5 gpm flow under full vacuum
(14” Hg) and requires just 9.5 amps compared to competitive models using 13 to 25
amps. Since no filters are required, the Dura-Flow APO is able to pump small solids
and debris.
Available for the CDS, Boxxer and Titan Series
Dura-Flow APO for CDS Part# 079-097 (Factory/Field Installed)
Dura-Flow APO for retrofit Part# 079-094 (Field Installed)
Dura-Flow APO for Boxxer 318 w/ 65 gallon tank Part# 079-099 (Factory/Field Installed)
Dura-Flow APO for Boxxer 318 w/ 70 gallon tank Part# 079-091 (Factory Installed)
22
Performance comes standard.
Fresh Water Tanks
Seen here with storage
bin and reel.
120 Gallon Horizontal Fresh Water Tank
Fits under hose reel to minimize space requirements in cramped
quarters. Powder coated marine aluminum tank with cross
baffling. 6” access ports, fill port, drain valve, sight tube level
indicator and breather fitting. 12 volt pump-in system.
(48.25W x 52.25K x 12.50H)
Item# 079-012
The bladder pump reduces
pulsing. Designed to work with
our truckmounts to reduce
cycling of diaphragm pump.
The new 70 Gallon Sub-Mount RMT
Freshwater Tank from HydraMaster
85 Gallon
Rotomolded Tank
Careful planning and
great execution went
into the design of the
85 gallon rotomolded tank.
Constructed with a no-rust, powder coated
aluminum frame and precision casting, this poly tank
system offers a long life and no corrosion. This tank has all
the features; easy access, fill shut-off valve, connections
for vacuum hose, drain valve and pump out connection.
The chemical jug sits on the top left side of the tank. The
85 gallon rotomolded tank mounts securely under a Boxxer
423s, 318 and Titan 575 or a vacuum hose reel.
(46W x 44L x 12H) Item# 159-118
110 Gallon Over the Wheel Well Fresh Water Poly Tank
Complete 110 gallon, over the wheel well, fresh water tank
including; float valve, mounting hardware, wand bracket,
and chemical tray. Thick wall construction with epoxy coated
brackets and storage race, with universal mounting.
Item# 159-115
Pump in Kit for Poly Tank
Sold Separately Part
#079-081
If you need a place to store your wine glasses, this
is not the right tank for you. It doesn’t attempt to hold
chemicals, or sprayers, or soda pop cans. It does
what a fresh water tank is supposed to do: increase
available floor space in the van; reduce set-up and
tear down time at the job site; and deliver fresh
water to your truckmount consistently and effectively.
(*No internal shut off float - uses overflow vent)
HydraMaster part number: 000-163-212
Boxxer 318
Mounting Kit
w/65 gallon tank
Part #079-101*
Boxxer 423s
Mounting Kit
Part #079-092*
* Kit necessary to mount Boxxer 318 and 423s to tanks
800.426.1301
www.hydramaster.com
23
HydraCradle™ Fresh Water Tank
Key Features
• RUST FREE tank and reels!
• Large 125 gallon capacity
• Space saving design
• Holds up to three solution reels for garden hoses or
solution lines
Standard Tank One Reel
285 lbs (without hoses)
34”W x 47¼“H x 65”L
Part #163-600 - Standard tank
(1 solution hose reel NON-LIVE)
Part 163-601 - Standard tank
(1 garden hose reel NON-LIVE)
Part 163-600L - Standard tank
(1 garden hose reel LIVE)
Part 163-601L - Standard tank
(1 garden hose reel LIVE)
125 Gallon Fresh Water Tank
An innovative combination of durable, rotomolded
components and high-quality powder coated steel.
Featuring a rotomolded “live center” vacuum hose
reel and powered retraction with a convenient foot
switch. This tank accommodates up to three solution
or garden hoses on rust-proof rotomolded wheels
with the option of adding live centers.
• 125 gallon usable capacity fresh water tanks and
hose reel (22 gallons more than the competitor’s
tank)
• 38” diameter molded vacuum hose reel with
powered retraction (using convenient foot pedal)
• Hose reel holds a full 250’ of 2” vacuum hose
• 14” diameter molded solution hose reel with
optional “live center” that holds 250’ of solution
hose or garden hose
• Easily-accessible front located fresh water fill
connector
• Automatic fresh water shut-off when tank is full
• Demand pump with easily-accessible frontmounted strainer
Tank with Two Reels
311 lbs (without hoses)
34”W x 47¼“H x 65”L
Part #163-602S
Reel #2; solution reel NON-LIVE
Part #163-602G
Reel #2; garden reel NON-LIVE
Part #163-602SL
Reel #2; solution reel LIVE
Part #163-602GL
Reel #2; garden reel LIVE
Tank with Three Reels
325 lbs (without hoses)
34”W x 47¼“H x 74”L
Part #163-603S
solution reel NON-LIVE
Part #163-603G
garden reel NON-LIVE
Part #163-603SL
solution reel LIVE
Part #163-603GL
garden reel LIVE
• Convenient mounting station for pre-treat bottle
with wand holder
Learn more,
scan here
24
Performance comes standard.
Hose Reels
REEL MODEL NUMBER LEGEND
R 12 36-150 S
Type of rewind
Drum length
Storage or Live
Capacity
Rim Diameter
Triple Storage Reels for vacuum, solution and
HydraMaster has put together the
largest assortment of manual and
electric wind hose reels available.
Made of heavy duty steel and
powder coated, these hose reels
are designed specifically to meet
the demands of the professional
carpet cleaner.
Samples of
available sizes are listed here,
additional sizes are available.
Part numbers, dimensions and
prices vary.
Please call for
further information.
garden hoses - electric or manual
Part No.
Model No.
Capacity
Width
Height
Depth
163-540
R1836-518S
200’
25”
38”
52”
163-541
E1836-518S
200’
29”
38”
52”
163-542
R2336-518S
300’
30”
38”
52”
163-543
E2336-518S
300’
30”
38”
52”
163-544
E3036-518S
350’
32”
38”
52”
Storage Hose Reels* for vacuum hoses
Part No.
Model No.
Capacity
Width
Height
Depth
163-501
R1836-200S
200’
25”
38”
36”
163-502
R2336-300S
300”
30’
38”
36”
*163-503
R1244-200S
200’
19”
46”
44”
*163-504
R1544-250S
250’
22”
46”
44”
*163-505
R1844-300S
300’
25”
46”
44”
* These reels will not fit on a fresh water tank
800.426.1301
www.hydramaster.com
25
Hose Reels
Triple Storage Reels for vacuum, solution and
garden hoses - electric or manual
Part No.
Model No.
Capacity
Width
Height
Depth
163-550
R1836-518L
200’
25”
38”
52”
163-551
E1836-518L
200’
29”
38”
52”
163-552
R2336-518L
300’
30”
38”
52”
163-553
E2336-518L
300’
34”
38”
52”
Storage Hose Reels* electric rewind
Part No.
Model No.
Capacity
Width
Height
163-510
163-511
Depth
E1236-200S
150’
23”
38”
36”
E1836-200S
200’
29”
38”
36”
163-512
E2336-300S
300’
34”
38”
36”
*163-513
E1244-200S
200’
23”
46”
44”
*163-514
E1544-250S
205’
26”
46”
44”
*163-515
E1844-300S
300’
29”
46”
44”
Create your own custom
combinations; seen here is
a Manual Storage Reel with
Stacking Bracket and two
Storage Reels for solution
or garden hoses.
Live Hub Reels
Part No.
Model No.
Capacity
Width
Height
Depth
*163-522
R1244-200L
200’
19”
46”
44”
Live Hub Reels electric rewind
Part No.
Model No.
Capacity
Width
Height
Depth
*163-532
E1244-200L
200’
23”
46”
44”
163-533
E1544-250L
250’
26”
46”
44”
Storage Hose Reels for solution
and garden hoses
Part No.
Model No.
Capacity
Diameter
Width
163-560
650-18S
Storage 300’ x ¼”
18”
5”
163-561
605-18L-02
Live ¼ 300’ x ¼”
18”
5”
163-562
605-18L-05
Live ½” 300’ x ¼”
18”
5”
163-565
605-22S
Storage 450’ x ¼”
22”
5”
163-566
605-22L-02
Live ¼” 300’ x ¼”
22”
5”
163-567
605-22L-05
Live ½” 300’ x ¼”
22”
5”
* These reels will not fit on a fresh water tank
26
Performance comes standard.
Stacking Bracket
Part No.
Model No.
Capacity
163-580
82-27
For 1 reel
163-581
82-28
For 2 reels
Van Accessories
Even fully loaded, our custom interior packages save space.
Tools, equipment, reels and hoses are at your fingertips. Basic
items can be rearranged as more accessories are needed and
added. It’s clean and simple, with a professional appearance.
Handy and economical, this
dispenser keeps pads neatly
corralled and snap blocks
stacked. Mounts easily inside
the van doors.
800.426.1301
www.hydramaster.com
27
Van Accessories
Our standard custom package includes:
•
•
•
•
•
•
•
28
Fresh water tank (85 gallon rotomolded or 120 gallon)
Stainless steel three-tier shelf
Back door two-tier bin
Furniture tab and block holder
Wand storage rack
Rake storage clip (not shown)
Stair tool holder (not shown)
Performance comes standard.
Hoses
SOLUTION HOSES
Pressure Washing Kit
#078-123
3000 psi Working Pressure, 250°F
150’ F/F
blue
#068-206
Also available in 100’ blue #068-208
50’ M/F
blue
50’ F/F
#068-199
50’ No Quick
Connect
VACUUM HOSES
50’ 2” dia.
blue
#068-065
50’ 1½” dia.
blue
#068-316
CONNECTORS
blue
#068-198
blue
#068-567
25’ 1½” dia.
gray
#068-331
Also available in 15’ gray #068-194
GARDEN HOSES
2” to 2”
#052-168
1½” to 1½”#052-162
2½” to 2”#052-775
10’ 1½” dia. whip blue
#068-317
50’ green#068-035
2” to 1½”#052-166
800.426.1301
www.hydramaster.com
29
Accessories
Chemical Jug Assembly
Tired of using a bungee cord to tie down your
chemical jug and climbing inside your van to
connect the vacuum and drain hoses? This
combination chemical jug holder and hose
connection console makes your life easier and
helps jobs go faster by securing the chemical jug
in an easy-to-reach position and moves the hose
connection points to the door opening in your van.
Part# 079-048
APO Kit for
Chemical Jug Holder
Part# 079-049
Thru Floor
Exhaust Kit
Divert exhaust and noise
away from you, buildings,
foliage, etc., with our
Thru Floor Exhaust Kit.
This easy to install kit routes the
machine’s exhaust downward under
the vehicle and away from the operator.
Works with Boxxer and Titan truckmounts.
Kit includes:
28-inch long flexible exhaust hose, stainless steel
exhaust port, two hose clamps, mounting hardware, and
instructions.
Part# 078-381 CDS Security Pass-Thru Kit
Part# 078-515 2.5” - Boxxer 318, 318HP, 323HP, 423S
Part# 078-414 Boxxer XL, Titan H2O
Part# 079-129 Titan 575
NOTE: Not intended to allow the user to operate the truckmount with
the vehicle doors closed.
MagnaClean Water Conditioner
Hard water scale is one of the most common causes
of truckmount heating system failure. Untreated hard
water causes loss of performance in heat exchangers
and many times permanent damage to components.
The MagnaClean Water Conditioner was especially
designed to control the problem of lime scale buildup in truckmount systems. Unlike other systems,
the affordable MagnaClean is simple to install and
requires no chemicals, external power, or constant
maintenance.
Maxx Air Filter Basket
Filter Basket - The new filter basket has 50%
more open area and is therefore significantly
less restrictive than any basket we’ve seen.
With a closer mesh structure, this basket will
catch and retain more solids. It’s constructed
of stainless steel and molded polymer for a
lifetime of convenient use. Part# 049-152
Part# 163-056
Five Gallon Jug
All the tough components of
the 5 gallon dispenser jug, but
without the dispenser faucet.
Measure accurately when
premixing chemicals. Special
cap prevents spillage during
transportation.
Part# 159-016
30
Performance comes standard.
Vacuum Tank Filter Bags
7” x 34”
14” x 18”
7” x 20”
Part# 049-028
Part# 049-029
Part# 049-030
Warranty
HydraMaster warrants to the original end user, each new machine,
new accessories and genuine replacement parts against defects
in material and workmanship under normal use and service. Our
obligation under this warranty is limited to repair or replacement
of the defective item at our factory or by an Authorized Service
Center. Warranty coverage shall begin on the date of purchase by
the original end user (as evidenced by your invoice from the factory
or Authorized Dealer) or six (6) months from the date the machine
was shipped from the factory, whichever is earlier. The warranty
registration card must be completed and returned within 30 days of
purchase. The warranty coverage period is specified below.
GROUP
Parts1,2
Labor2
Frame
3 Years
2 Years
Covers
3 Years
2 Years
Vacuum Recovery Tank (Structural only)
3 Years
2 Years
Vacuum Pump
See Note 3
2 Years
Chemical Systems
2 Years
2 Years
Hoses, Internal Machine
2 Years
2 Years
Hoses, External Machine
2 Years
2 Years
Valve, High pressure bypass
2 Years
2 Years
Water Heating System
2 Years
2 Years
Pump, High pressure water
See Note 3
2 Years
Belts
2 Years
2 Years
Fittings, internal machine
2 Years
2 Years
Filter Screens
2 Years
2 Years
Gauges
2 Years
2 Years
Electrical Components
2 Years
2 Years
Engine
See Note 3
2 Years
Accessories and Fresh Water Tanks
1 Year
1 Year
Replacement Parts 4
90 Days
NA
NOTES:
1. Parts repaired or replaced are guaranteed for the remainder of the original
machine warranty period.
2. Coverage only applicable to products sold and used in the United States and Canada.
3. As provided by the original Manufacturer.
4. Applies to replacement parts only after machine warranty coverage has expired.
This warranty shall not apply to repairs resulting from accidents or
misuse, damage in transit, overloading the capacity of the machine,
failure due to lack of proper maintenance or care as described in
the operating and maintenance instructions. Freezing of any water
or chemical related component will VOID all warranties on water
or chemical related components, internal or external. Corrosion,
deposits and/or build-up in the water, chemical, recovery or heating
systems due to hardness in the water used or chemicals which
result in deposits, will VOID all warranties on affected components.
The use or application of any chemical, including but not limited to
acids or solvents, which results in damage to metal, rubber, plastic,
or painted parts will VOID all warranties on those parts. Minor
adjustments, such as tightening of screws or bolts not connected
with the replacement of parts, are not covered. Replacement of
expendable wear items including, but not limited to paint, labels and
other cosmetic parts are also not covered. Repairs or alterations
by an organization other than the factory or an Authorized Service
Center are not covered and will void any HydraMaster warranty
as to the parts or systems repaired or altered by a non-authorized
organization.
THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE
DESCRIPTION OF THE LIMITED WARRANTIES STATED WITHIN. NO
OTHER WARRANTY, EXPRESSED OR IMPLIED, INCLUDING BUT
NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE EXCEPT
AS EXPRESSLY STATED HEREIN. ANY STATUTORY IMPLIED
WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, THAT ARE IMPOSED
BY LAW DESPITE THE EXPRESS LIMITATION OR WARRANTIES
ABOVE, ARE EXPRESSLY LIMITED TO THE DURATION OF THE
WRITTEN WARRANTY. BUYER UNDERSTANDS, ACKNOWLEDGES
AND AGREES THAT THE REMEDIES PROVIDED UNDER THIS
LIMITED WARRANTY ARE THE SOLE AND EXCLUSIVE REMEDIES
AVAILABLE TO THE BUYER. HYDRAMASTER WILL NOT BE LIABLE
FOR ANY OTHER OR ADDITIONAL DAMAGES, INCLUDING BUT NOT
LIMITED TO INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF OR IN CONNECTION WITH THE FURNISHING,
PERFORMANCE, USE OF OR INABILITY TO USE THE MACHINE. ANY
EXTENSIONS OF OR MODIFICATIONS MADE TO THIS WARRANTY
BY A DEALER/DISTRIBUTOR OF HYDRAMASTER ARE THE SOLE
RESPONSIBILITY OF THE DEALER/DISTRIBUTOR.
HydraMaster will pay all freight and transportation charges
within the United States, via normal ground shipping means, for
replacement of parts covered under this warranty. All material must
be properly authorized by HydraMaster prior to being returned.
When returning, please provide an explanation of the problem and
include the serial number of the machine as well as the name of
the selling organization. All defective material must be returned to
HydraMaster within 60 days of authorization. The Technical Service
department of the authorized Dealer Service Center or the factory
will investigate and then contact you.
Transportation of hazardous waste or contaminated equipment is
subject to various laws and regulations. In returning machines,
parts, or accessories under this limited warranty, the end user
must certify in writing that the machines, parts or accessories
being returned have not been used for handling, clean up, or
disposal of hazardous waste or hazardous materials including
but not limited to such things as asbestos, anthrax etc. or if
the machines, parts or accessories being returned have been
used for handling, clean up, or disposal of hazardous waste or
hazardous materials, then the end user must have the machines,
parts or accessories decontaminated by licensed and qualified
decontamination professionals and provide written certification of
this decontamination signed by the decontamination professionals.
These machines, parts or accessories are to be returned only to the
local HydraMaster Authorized Service Center for Warranty service
along with decontamination certification.
HydraMaster reserves the right to change its warranty policy without
notice.
HydraMaster is a Nilfisk-Advance, Inc. brand.
800.426.1301
www.hydramaster.com
31
Just switched from a White Magic Pro
1800 (older model) to a brand new Boxxer.
Wondering what took me so long.
see : Rick M
The number of people we’ve converted to
Boxxer 421s is staggering, and they all say
the same thing as the guy above. Just a great
machine for a great price.
see : S. Thompson
Fan : (noun)
Still running great.
see : Alpine Professional Carpet Care
I wouldn’t use anything else. I do lots of
restaurants - I need lots of heat. My Boxxer’s
heat is fantastic! This machine works hard
for me.
see : Neal, in Florida
a : short for fanatic : b421: persons
with Efficient and
is a great machine!
an extreme and uncriticalpowerful.
enthusiasm or
Just a quick comment expressing how happy
see : Jason L
zeal : c : enthusiast, zealot, devotee refer
I am after owning my new CDS for 1 year
CDS is great!
now.to
For persons
22 years carpetshowing
cleaning I always
moreThethan
ordinary
: Larry L
started the day worried about breakdowns.
support for, adherence to,seeor
interest in a
Nothing negative about the CDS in 1 year,
point
ofprevious
view,slide
or activity.
I have used the RX-20 for as long as I could
fuel cause,
usage is less
than my
in and cleaning temp much higher than
expected.
see : Jerry J
My HydraMaster upholstery tool (Dri
Master 3 tool) arrived and after trying it
out, I must say it’s the best tool I’ve every
purchased!!! Thanks for your great products
and customer support!”
see : Brandon J
I just cleaned over 100 chairs-CouchesDining room chairs with the ‘Drymaster
Upholstery Tool‘ amazing results, comments
from customers. I use a Hydromaster
4.8 cds / Salsa , honestly the heat makes
cleaning easy, but the Drimaster leaves the
Upholstery dry with in 1-2 hours depending
on circulation . This tool has paid for itself 5
times over in past year
see : Darren P
The Boxxer is a very good dollar value. The
customer is very pleased. He’d buy another
one tomorrow.
see: Herb S.
Great tool, I have had both the older and
now the newer one best upholstery tool I
have used no more sore fore arms!
see : Mike C
I have an old CDS 4.7 with 7148 hours on it.
remember. When I was 3-6 years old my
dad would have me sit on the motor for extra
weight, we ended up burning up a motor. I
use it on 90% of my jobs commercial and
residential.
see : VS Restoration Carpet Cleaning
I have been using one [RX-20] since I
was a kid helping my dad, we use them
on probably 99.9% of our jobs , it has also
become one of our main marketing tools,
seeing that hardly no one else in our area
uses a rotary of any kind ! The funny thing is
that I have met other so called professionals
in our area (with 25 yeas plus experience ,
so says their ads) who have never seen such
a thing! we’ve been using them for 15 plus
years definitely our best investment! We’ve
got 3 in use 2 in backup & 3 in parts, very
reliable pieces of equipment!!!
see ; Marty J
The RX20 does a great job cleaning carpet.
... I have a lot of customers that think the
only thing that can get their carpet clean is
the RX20.
see : Alpine Professional Carpet Care
Between the high performance of the 875
and the help and support I’ve received from
my vendors, I’m proud to say my business
is booming through this recession.
11015 47th Avenue West, Mukilteo, WA 98275
see : A Plus carpet Cleaning
...At first my guys were a little reluctant
to use the 875. They were used to the old
machines. But now, because it is so easy to
use and does such a great job, they use it
whenever and wherever they can.
see : Palm Springs School District
[Titan 575] does a great job. I never have
any customer complaints after using the
575. But, the big plus about this machine
is it is virtually maintenance-free. It’s ready
when I am, and that’s what you have to have
in the carpet cleaning business. It [is] great
at cleaning tile and grout floors. We also do
upholstery cleaning with this machine - it
does a terrific job cleaning up upholstery....I
just got my second 575 two months ago.
When it comes to praising the 575, I not
only talk the talk, but walk the walk as well.
I do like this machine.
see : Serenity Carpets
This machine surpasses what the ads say.
This is the best truckmount I’ve ever owned.
It’s an amazing truckmount. Stains come
out that never came out before, the carpets
dry faster, and there’s no need for a gum
remover. That’s why I tell my customers I
don’t clean carpets…I Titanize them.
see : Robert L
...I have a slide-in HydraCat unit that is 32
years old, a 4.5 that is 16 years old, and my
newest baby, a 4.8 that is 6 months old. I
am going on 39 years in the carpet cleaning
industry, and I still enjoy watching how
clean the carpets get and how they look
when we are done. Thank you HydraMaster
for the best carpet cleaning equipment
around!
see : Thomas J, Hydra Carpet Cleaning Co.
There’s simply no comparison. The CDS is
just a much smoother, [more] dependable,
and [more] even-running machine than
anything I’ve ever owned.
see : Gary R
800.426.1301
www.hydramaster.com