how it works suggested use specifications

HOW IT WORKS
Extreme Oxygen products take used medical generators and modifies them
to operate at higher pressure and more pure oxygen, than ever before. The
generators are rebuilt, modified as well as the sieve bed and the PC board. The
oxygen is 10% purer than medical grade oxygen. This interprets to a hotter
flame. Room air is taken and pushed through a series of filters using an air
compressor. These filters separate the oxygen from the other gasses. It then
sends the oxygen to your torch and the nitrogen is flushed out of the system.
SUGGESTED USE
EX05 - Nortel Minor
EX-10 - Carlisle Mini CC (Soft Glass)
EX-15 - Carlisle Mini CC (Boro)
2 EX-15 Using a manifold, Nortel mid range, Carlisle wild cat
3 EX-15 Using a manifold, Nortel Red Max Carlisle Hell Cat
All of the suggested use is per manufacture specifications. Everyone operates
their torch differently, results may vary.
SPECIFICATIONS
Volts - 110
Amp - 5.7
HZ - 60
Operating Temp: 65 to 100 degrees F
EX-5 / Max Flow 5 LPM - Pressure 7 PSI
EX-10 / Max Flow 5 LPM - Pressure 10 PSI
EX-15 / Max Flow 8 LPM - Pressure 15 PSI
USING A MANIFOLD
If you are using an EX-15, and need more power simply hook another EX15 to your torch. Now you have doubled your power.
Order Online @
www.littonengr.com