CUBBI

CUBBI By:SB
This is how to make a Cubbi The materials you will need are: Materials: CardBoard Box Duct Tape 3D Printer (If not don’t worry about it) Hot Glue Gun Little Bits( Batteries) So let’s get started First find a box, then you can cover it with duct tape. Cut out 3 thin pieces of cardboard. After that duct tape the 3 pieces in the cubbi so it looks like it's a shelf. When your done that make handles so you can open the door. After make a small box so you can add the little bits. The little bits you will need look like these A power supply, Button, DC Motor and a Battery The box that I made looks like this I designed it in Tinkercad a website and used the 3D printer to print it out. After it was made I put the little bits in the box The box is white as you can see. Then you need to make a box out of cardboard put the 3D printer box in the cardboard box and tape it on like this. Get a counter chip (or something round) and attach it to the motor. I used tape to attach it.. Tie string to one of the handles and to the motor.After that press the on switch and press the button and see if it works.!!!!! And that’s how you make a COOL CUBBI that has a door opener.