docThe Thompson Enamel Catalog. To for
download 
Report Transcription
The Thompson Enamel Catalog. To for
Thompson Enamel 650 Colfax Avenue Bellevue, KY 41073 USA Mailing Address: P.O Box 72310 Newport, KY 41072 How To Find Us! From the Airport: Take I-275 East for apprx. 12-1/2 miles to the I-471 North - NewportCincinnati Exit on the left side of the interstate. Drive north on I-471 N. for apprx. 3-1/2 miles to the 2nd Newport Exit (Newport-Bellevue Exit 4). The exit ramp will bring you to Memorial Parkway. Turn right and drive up to the first intersection moving into the far left lane at the light. Turn left onto Wilson and proceed to Bonnie Leslie at the second stop sign, where Wilson Tʼs into Bonnie Leslie. Turn right onto Bonnie Leslie and proceed up the hill and take the first left - Berry Avenue. Drive down Berry past 2 stop signs. Just under the railroad overpass turn left onto Colfax Avenue. Follow Colfax to the very end. Thompson is the last large concrete building on the left. Parking and entrance at far end (south/west) of building. x www.thompsonenamel.com info@thompsonenamel.com sales@thompsonenamel.com techsupport@thompsonenamel.com Phone: 1-859 -291-3800 FAX: 1-859 -291-1849 From Lexington or Louisville, KY: Take I-75 North to the I-275 East Exit. Follow the directions from the airport. From Cincinnati: As youʼre traveling south on I-75 approaching downtown Cincinnati, stay in the left lane. Follow the signs for I-71 North. Take the I-471 South - Newport Exit which will take you across the Daniel Carter Beard bridge. Take the first exit (Newport-Bellevue) on the other side of the bridge. The exit ramp will take you to a light. Turn right at the light (Rte. 8) and go to the 3rd light. Turn right on Riviera and follow it to itsʼ end where it Tʼs into Donnermeyer at a 3-way stop. Turn left onto Donnermeyer and proceed to the next 3-way stop. Turn right, go through one stop sign and take the next street on your right, Colfax Avenue, just in front of the railroad overpass. Follow Colfax to the end. Thompson is the last large concrete building on the left. Parking and entrance at far end (south/west) of building. Thompson Enamel 650 Colfax Ave. Bellevue, KY 41073 Company Hours: 8:00 AM to 4:30 PM Eastern Time Monday-Friday Thompson Enamel CATALOG Thompson Enamel, Inc. 650 Colfax Avenue, Bellevue, KY 41073 USA Phone: 1-859-291-3800 FAX: 1-859-291-1849 Web Site: www.ThompsonEnamel.com E-Mail Addresses: techsupport@ThompsonEnamel.com sales@ThompsonEnamel.com info@ThompsonEnamel.com Mailing Address: P.O. Box 72310 Newport, KY 41072 USA Catalog No. 1301 - REV-2 Index Kiln Wash....................................................20 Kiln Cement................................................20 Klyr-Fire......................................................14 Lea Compound...........................................16 Line Sifter....................................................15 Liquid Form Brushable Enamels...................9 Liquid Form Water Base Enamels............8, 9 Liquid Metal - Gold, Palladium....................13 Lusters........................................................12 Luster Decal Sheets...............................12 Malleable Copper........................................13 Marinite Board.............................................20 Marking Pen, Gold......................................13 Mechanical Crayons for Enamel.................10 Medium for painting..............................14, 15 Metal Clay Enameling Kit............................35 Metal Cleaner..............................................14 Mica - Sheet................................................17 Millefiore........................................................8 Mixing White.....................................9 Mortar and Pestle........................................15 Mother of Pearl...........................................13 Newallʼs Glue..............................................38 Nichrome Wire............................................17 Nuts & Bolts (Miniature)..............................38 Oil of Clove & Lavender..............................14 Ordering Information.....................................2 Overglaze Painting Colors............................9 Overglaze Fine Line Black....................10 Oxide Inhibitor.............................................14 Oxidized Steel Plates for Soldering............13 Painting Colors........................................9-11 Palladium - Liquid.......................................13 Painting Enamels.....................................8-11 Painting Enamel Kit...............................10 Painting Flux...............................................10 Painting Medium...................................14, 15 Patterned Decal Sheets..............................12 Pellon Stencil Material................................16 Penny Brite.................................................14 Pens - Enamel Marking.........................11 Pens for Liquid Metal/Painting Colors........ 16 Petri Dishes.................................................15 Pickling Agents...........................................14 Pink/Lavender Painting Colors....................10 Pins and Bars..............................................37 Planches................................................17 Pliers - Jewelers..........................................20 Plique-à-jour Silver Wires.....................13 Plique-à-jour Accessories...........................13 PnP Blue Transfer Film...............................20 Powder Vibe.......................................43 Product Infor mation.........................1, 2 Product Safety Information...........................1 Publications...........................................39-42 Pyrometers..................................................22 Scalex.........................................................14 Screening Enamels..................................8-11 Screening Medium....................................15 Screening Oil..............................................14 Screens.......................................................15 Scrolling Tools............................................17 Separation Enamel.....................................10 Sifters..........................................................15 Silver - Enamels For.................................4, 5 Silver Foil....................................................13 Silver Plated Steel.......................................27 Silver Tooling Foil.......................................13 Silver (Sterling) Step Bezel Wire................13 Solder - Silver, Eutectic..............................13 Soldering Tweezers....................................20 Solid Color Decals......................................10 Sparex No. 1 & 2.........................................14 Spatula (Stainless Steel).............................17 Sprayer - Aerosol........................................15 Squeegee Oil..............................................14 Stained Glass - Enamels For.......................6 Stainless Steel (400 series) Enamel.........5, 6 Stainless Steel Wire Screen.......................15 Steel Panels - Enameled.......................25-26 Stencil Material...........................................16 Sterling Silver Cinch Mount Sets.................35 Stilts.......................................................18-20 Stones - Alundum.......................................16 Stoning Materials..................................16 Storage Containers.....................................15 Switch & Outlet Plates (Copper).................34 Thermocouples...........................................22 Thinning Oil No. 5.......................................14 Threads - Enamel.........................................8 Tongs (Copper) for Acid Solutions..............14 Tooling Foil (Copper & Silver).....................13 Tripod for Torch Firing With Two Racks......18 Trivets....................................................18-20 Underglaze Black..................................10 Underglaze Crayons...................................12 Videos.........................................................42 Vinyl Stencil Material...................................16 Vitreco™ Floral Wafers & Buttons................8 Water Color Enamels..................................9 Window Glass - Enamels For....................5, 6 Thompson Enamels cates enamel type while the hundreds number indicates the color. The final two numbers indicate how light or dark that color is. For example, 1505 is an opaque pastel greenish blue for copper, and 2680 is a transparent dark blue for copper. Thompson Enamels are lead-free glass products available in various particle sizes and formulated to fit a variety of metal and glass substrates. These products are described in terms of temperature and expansion to help you select a suitable enamel for your particular project. The best way to select an enamel is to determine their properties in the following sequence: (1) Fusing temperature (2) Fit or compatibility and (3) Color. It is important to pre-test enamels prior to using; 1) printed color charts do not always perfectly match the product they represent and 2) there may be slight variations in the character of any given enamel from batch to batch. 80 mesh enamel is the standard particle size available to our customers unless specified otherwise. 80 mesh is glass ground to a particle size which is slightly finer than granular sugar. It is normally applied by sifting, but can also be mixed with water and charged onto the substrate surface. 6/20 mesh enamels are particles that have an average diameter of about 1/16” to 1/8”. These particles are ideal for bead making. Lump enamels (Unground, Unscreened enamels) are particles that range from 1/16” to 1” diameter chips. A variety of painting and liquid enamels are also available for specific substrates listed on pages 8-12. For expanded information about the products found in this catalog and the technology involved to use them, see the description of the Thompson Enamel Workbook on page 39. All enamel products in this catalog are numbered into a practical coded numbering system which indicates enamel type and color. This coding can be easily seen by examining our color charts in the center of this catalog. The thousands number indi- Product Safety Information All of Thompsonʼs enamel products are glass of one form or another. Care should be taken not to ingest them. These products, however, can be used quite safely if you adhere to the following housekeeping and hygiene rules: Rule I. Keep your work area neat and clean. Keep your clothing clean. Rule II. Use your enamels in a well ventilated work area. Wear a protective dust mask if you are working with enamel powders for an extended period of time. (See page 15.) Rule III. Wash your hands prior to eating. Do not smoke or handle food when you are working with enamels. Please call 859-291-3800 if more specific information on any particular product is required. FAX: 859-291-1849. Food Contact Surfaces We do not recommend the use of our enamels for food contact surfaces. Although they are very acid resistant and do not contain lead, their final food safe properties may depend on enamel application and firing. Each such item made from them should be individually tested to determine whether or not it passes current F.D.A. regulations. This process would probably be too costly for the average artist. We Thank You For Your Business PRICES SUBJECT TO CHANGE WITHOUT NOTICE 48 1 Ordering Information Thompson Enamel accepts Visa, MasterCard, Discover and American Express. When you use your charge card, do not include shipping charges in your total. Your packing slip will show correct charges for items shipped. Your next monthʼs Visa, MasterCard, Discover or American Express billing will show the total charged cost of your purchase including shipping. Purchases not made on Visa, MasterCard, Discover or American Express must be accompanied by a check or money order. Add 10% to your total to cover shipping and handling. Thompson Enamel does not maintain personal charge accounts for individuals. Charges must be made to either Visa, Master Card, Discover or American Express. Sorry—No C.O.D.ʼs. Purchases are shipped U.P.S. whenever possible unless otherwise requested. A street address is required for U.P.S. delivery. U.P.S. will not deliver to a post office box number. Always fill out your order blank as completely as possible. Please be sure to include your phone number so we can notify you of any price changes or other discrepancies. Prices are F.O.B. Newport, Kentucky. All customers please remit in U.S. funds, checks drawn on a U.S. Bank. Thompson Enamel accepts... Adjustments or Returns Upon receipt of your order please inspect contents and notify us immediately of any discrepancy or damage by calling one of our sales representatives for return authorization at 1-859-291-3800. This will allow us to serve you in a more efficient manner. We can replace, exchange or refund for any purchase which is incorrect, damaged or defective in any way. All other returns may be subject to a 15% restocking fee. Product Availability We make every effort to insure we are fully stocked on every item in the catalog so that we may ship your order complete. Occasionally we must back order and ship at a later date. If for any reason you do not wish to have items back ordered, please mark your order form indicating one of the following choices: (a) please contact me for substitutions (b) cancel out-of-stock items. Back orders are shipped promptly upon receipt of out-of-stock items. All orders are shipped out in the order they are received. Shipping All orders are shipped UPS Ground unless otherwise specified. Shipping time zones from Bellevue, Kentucky are shown at left. 1 - One Day 2 - Two Days 3 - Three Days 4 - Four Days 5 - Five Days 2 Index Acrylic Enamels............................................9 Acrylic Medium............................................14 Adhesive - For Findings..............................38 Agar............................................................14 Alundum Stones.........................................16 Asphaltum Varnish.....................................20 Beads - Seamless Copper....................23 Bead Making - Stringing Supplies..............38 Bead Making Supplies................................23 Bead Making Holders.................................23 Bead Racks.................................................23 Beginner's Enameling Kit...........................22 Bezel Wire - Sterling Silver - Step...............13 Bezels - Sterling Silver for pendants.....35 Bezels - Economy Instant for pendants...37 Blockout-Resist Media................................20 Blu-Stic Cloisonné Wire Adhesive..............15 Bolting Cloth................................................15 Bright Boy...................................................16 Brooch Sets................................................37 Brushable Enamels (Liquid)..........................9 Brushes - For Liquid Metals........................16 Burnishing Tools.........................................16 Carbon Paper for Transfer..........................16 Carefree® Lusters......................................12 Carefree® Luster Decal Sheets................12 Ceramic Pigments......................................11 Chains........................................................36 Citric Acid (for Edinburgh Etch)...................12 Cloisonné Wire - Copper, Silver................ .13 Containers - Storage...................................15 Controller - Furnace....................................22 Controlling Pyrometer.................................22 Copper - Beads...........................................23 Copper - Bowls, Trays ..........................32-34 Copper - Dishes & Platters...................32-34 Copper - Stamped Pieces................24, 28-31 Copper - Switch & Outlet Plates.................34 Copper - Enamels For...............................4, 5 Copper - Flat Sheet.....................................24 Copper Foil (Tooling)..................................13 Copper (Malleable).....................................13 Copper - Spun Shapes..........................32-34 Copper Tongs.............................................14 Copper Tubing............................................23 Copper Tubing Cutting Holder....................23 Counter Enamel - Dry...................................8 Cord - Black Rayon.....................................38 Crackle Colors...........................................8 Crackle Bases...............................................4 Crayons - Enamel Marking.........................10 Crayons - Mechanical.................................10 Crayons - Underglaze.................................12 Crucibles for Thread Making.......................17 47 Crow Quill Pen.................................16 Decal Sheets....................................10, 12 Diamond Cloth............................................16 Distributorʼs List.....................................44-46 Dust Masks.................................................15 Earring Findings..........................................36 Enamel Holding Agent................................14 Enamel Prices...............................................3 Enamel Samples...........................................3 Enamel Marking Crayons............................10 Enamel Marking Pens.................................11 Enameled Iron Tiles....................................25 Enameled Steel Plates................................26 Enameling Iron - Flat Sheet..................25 Enameling Iron - Pre-Coated................25, 26 Enamels - Brushable.....................................9 Enamels - Copper, Gold, Silver, LC Steel.4, 5 Enamels - Glass, 400 Series SS...............5, 6 Enamels - Effetre (Moretti) Glass..................7 Enamels - Stained and Hot Glass.................6 Etching Cream - Glass................................12 Eutectic Silver Solder..................................13 Face Shield.................................................43 Findings.................................................36-38 Fine Line Black.....................................10 Firing Racks..........................................17, 19 Firing Rack Support Bars............................17 Firing Tools.................................................17 Floral Wafers & Buttons................................8 Foil - Copper, Silver, Gold............... 13 Fur nace Floor Blanket...............................20 Fur nace Cement........................................20 Fur nace Wash...........................................20 Fur naces for Enameling............................21 Gift Certificates................................18, 34 Gilding Metal - Flat Sheet.....................26, 27 Gloves - Heat Resistant..............................17 Glass Brushes.............................................16 Gold - Enamels For...................................4, 5 Gold Foil......................................................13 Gold - Liquid................................................13 Gold Pen...................................................13 Grisaille Teaching Kit..................................11 Ground Coat for Steel...................................8 Holding Agents...........................................14 Hole Punch.................................................43 Hot Pad/Furnace Floor Pad........................20 Hot Glass - Enamels For...............................6 Inlay Tools...................................................16 Iron - Enameled Tiles............................25, 26 Iron Ground Coat......................................... 8 Jewel Effect Lumps......................................8 Jewelerʼs Saw.............................................20 Jewelry Accessories..............................36-38 Jump Rings.................................................36 (Continued on next page) INTERNATIONAL DISTRIBUTORS Australia Anna Margot Originals 10 Plumer Street Sherwood, Queensland 4075 Australia Ph. 011-617-3369-1527 Email: amosales@millton.net Koodak Jewellers Supplies Century Bdg/4th Fl. 125 Swanston St. Melbourne, VIC 3000 Australia Ph. 011-613-9654-5811 Belize Dan McCann PO Box 403 Belmopan, Belize Ph./Fax: 011-501-92-4104 E-mail: dmccannbelize@hotmail.com Canada Catherine Crowe 600 Markham Street Toronto, Ontario M6G 2L8 Canada Ph. (416) 534-3913 Greenbarn Potters Supply, Ltd. 9548 192nd St. Surrey, B.C. Canada V4N 3R9 Ph. (604) 888-3411 FAX (604) 888-4247 Hollander Glass Canada Inc. 3095 Universal Drive Mississauga, Ontario L4X 2E2 Canada Ph. (905) 625-7911 Kenʼs Gem Supplies, Inc. #18 2219 35th Ave. NE Calgary, Alberta T2E 6W3 Canada Ph. (403) 291-2912 FAX (403) 291-2782 www.kengem.com kengem@kengem.com Mercedes Ceramic Supply 20 Mississauga Valley Blvd. Suite 1603 Mississauga, Ontario Canada L5A 3S1 Ph. (905) 275-5920 (905) 851-0851 FAX: (905) 851-1064 Canada (Cont.) Orex International 7195 Rue Pierre Gadois Montreal, Quebec H1M 3H6 Canada Ph. (514) 353-2222 Fax. (514) 353-8350 Korea Enamel Prices Enamel prices reflect the cost of raw materials used to make specific colors. Enamels that do not have A, B, or C following the number and name are considered Standard Price. All others are priced according to the letter following the number and name i.e. A, B, or C. Bulk prices listed below are on poundage-per-color basis, not an accumulated total of all enamels ordered. Packaging is available in 2 oz., 8 oz., 5 lb. jars and boxes or drums for bulk quantities. Costa Rica Thompson Enamel Korea Co. Gallery2020/Jung Bok Hee 502, Hun-Dae Topics Bldg 44-3 Bang-E Dong, Song-Pa Ku Seoul, South Korea Ph.: 010-2899-4317 E-Mail: Gallery2020@Hanmail.net Denmark Glass Forum AS Kvernes 6530 Averoy, Norway Ph. 011 47 71514100 Fax 011 47 71514072 Website: GlassForum.no Email: gfans@online.no Samples and Samplers Germany Dragon Glass #10 Orange Road Farrarmere Benoni 1501 South Africa Ph. & FAX: 011-27-11-849-6430 Creative Glass MHS-AG Geerenstresse 13 Kindhausen CH-8604 Volketswil Switzerland Ph. 011-41 44 908 1155 FAX 011-41 44 946 1231 SAMP-A SAMP-B SAMP-C SAMP-D SAMP-E SAMP-F SAMP-G SAMP-H Galeria Musical Israel Zonzinski Calle 4 entre Avenidas 3 y 5 San Jose, Costa Rica Ph. 011 506 2222 8541 Cell: 011 506 8376 4310 E-mail: gmusical@racsa.co.cr Enamel Supply Munkeageren 17 4600 Koege, Denmark E-mail: info@enamelsupply.com www.enamelsupply.com www.emaljeforsyningen.dk Tiffany Glas Kunst GmbH Helleforthstraße 18-20 D-33758 Schloß HolteStukenbrock Germany Ph. 011-49-5207-9128-0 FAX: 011-49-5207-912840 C & R Loo GmbH Heisenbergstr. 19 D-50169 Kerpen-Turnich, Germany Ph. 011 49 2237 9282 0 Fax 011 49 2237 9282 10 Hong Kong Hands Art & Craft Ltd. 1A, Po Wah Commercial Center 226 Hennessy Road Wanchai, Hong Kong Ph. 852-2575-1836 FAX: 852-2838-2906 Iceland Tiffanyʼs Stained Glass Studio Smidjuvegur 4a 200 Kopavogur Iceland Ph. 011-354-893-8449 FAX 011-354-562-8449 46 Norway South Africa Switzerland Venezuela Charles Hardy Apartado Postal 20255 San Martin, Caracas, 1020A Venezuela Ph. (011) 58-416-622-2 80 Mesh Enamel or 6/20 Mesh Bead Making Price Group Standard Price Price Grade (A) Price Grade (B) Price Grade (C) Price Grade (G)* 2 oz. 8 oz. $7.80 $8.50 $12.60 $13.05 $14.55 $18.55 $19.90 $29.75 $31.20 $33.80 5-24 lbs. Price per lb. $29.70 $31.85 $47.60 $49.90 $54.10 Unground, Unscreened Enamels Opaques-Air Cooled; Transparents-Air Cooled, Water Cracked Size Varies - Approx. 1/2” to 2” 2 oz. 8 oz. $6.70 $7.15 $11.80 $12.45 $13.85 $15.25 $16.55 $26.90 $28.40 $30.90 5-24 lbs Price per lb. $24.40 $26.50 $43.05 $45.45 $49.45 * Price Grade (G) contains gold, and the price will fluctuate with prevailing gold market prices. Call for current prices. Special grinding or Sifting Surcharges (1) Single sifting other than 80 mesh (2) Double mesh such as 80/200 or finely ground such as -325 mesh 2 oz. & 8 oz. $3.45 packet $5.20 packet 5 lb. jar $17.50 jar $26.05 jar Printed color charts never precisely duplicate the effects you will achieve using our enamel products. This is particularly true for transparents where background color and thickness of application strongly influence final results. In order to help you select the color you really want, sample packets are available in six categories. Sample amount - Approx. heaping teaspoon of powder. Quantity may vary. Available only in 80 mesh, unless otherwise noted. Single Color (You select the color) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.15 Ten Colors (You select ten different colors, no duplicates please) . . . . . . . . . . . . .$9.40 Complete Med. Temperature-Medium Expansion Enamels (169 colors, pg. 4,5) . .$93.60 6/20 Mesh Med. Temp. - Medium Expansion Enamels (142 colors, pg. 4,5) . . .$104.10 *Complete Medium Temperature-Low Expansion Enamels (62 colors, pg. 5,6) . .$31.25 *Complete High Temperature-Medium Expansion Enamels (43 colors, pg. 6) . . .$31.25 Complete Pallet of Enamels for Effetre Glass (46 colors, pg. 7) . . . . . . . . . . . . . .$38.05 Complete Pallet of 6/20 mesh Frit for Effetre Glass (46 colors, pg. 7) . . . . . . . . . .$38.05 9000 Series Color Sets *Specify Small (0.5-1.4mm), Medium (0.9-3.4mm), or Large (2.4-4.8mm) Opaque Enamels for Effetre (Moretti) Glass - Coefficient of expansion: 104 (linear) Each set contains one-ounce jars of color. Available as 80 mesh powder or medium lumps (0.9 - 3.4mm). Price is $45.90 per set for EGS-1 & EGS-2; EGS-3 is $40.70. EGS-1 (Opaque) EGS-2 (Opaque) EGS-3 (Transparent) 9010 White 9110 Brown Beige 9250 Goldenrod 9320 Gray Green 9350 Moss Green 9530 Blue Green (A) 9605 Baby Blue 9650 Oxford Blue (A) 9710 Light Petal Pink (B) 9725 Flesh (B) 9740 New Purple (B) 9780 Dark Orchid (B) 9810 Peach 9835 Orange Red (C) 9840 Bright Red (C) 9940 Oxford Gray 9105 9180 9260 9330 9520 9550 9620 9660 9720 9730 9760 9790 9830 9850 9920 9990 Yellow Beige Dark Coffee Praseodymium Yellow Apple Green Gray Blue Green Aqua Marine (A) Medium Blue (A) Brilliant Blue (A) Dark Petal Pink (B) Pink Flesh (B) Light Orchid (B) Dark Purple (B) Mellon Orange (C) Dark Red (C) Light Oxford Midnight Black (A) 3 9400 9410 9415 9425 9434 9436 9443 9444 9452 9453 9463 9466 9475 9480 Clear Wax Yellow Khaki Spring Green Gem Green Glass Green Beryl Green Turquoise Aqua Blue (A) Water Blue (A) Bonnet Blue (A) Nitric Blue (A) Amethyst Cherry Pink (G) Medium Temperature - Medium Expansion Enamels for Copper, Gold, Silver, Low Carbon Steel & Metal Clay Normal firing temperature range: 1400-1500°F Coefficient of expansion range: 258-360 cubic expansion OPAQUES White Low Acid Resistance 1006 Crackle Base, White 1010 Undercoat White High Acid Resistance 1020 Titanium White 1030 Foundation White 1040 Quill White 1045 Antique White 1050 Mat 1055 White 1060 White Brown 1110 Pastel Brown 1124 Cork Brown 1125 Nut Brown 1140 Chamois Brown 1150 Woodrow Brown 1170 Elk Brown 1175 Moca Brown 1180 Briarwood Brown 1190 Peat Brown Beige - Light Yellow 1202 Off White 1208 Cream 1211 Candy Yellow 1224 Melon Yellow 1225 Lemon Yellow 1237 Butter Yellow (C) 1238 Ivory 1239 Mellow Yellow 1240 Pine Yellow Green 1305 Pastel Green 1308 Lichen Green 1315 Willow Green 1319 Bitter Green (C) 1335 Pea Green (C) 1345 Hunters Green 1360 Jungle Green 1380 Mistletoe Green 1390 Alpine Green Blue - Green 1405 Pastel Bluish Green 1410 Robinʼs Egg Blue 1415 Sea Foam Green 1420 Mint Green (C) 1422 Aqua Marine Green 1425 Sapphire (C) 1430 Spruce Green (A) 1440 Delft Blue Green (A) 1465 Peacock Blue (A) Green - Blue 1505 Pastel Greenish Blue 1510 Ozone Blue 1515 Horizon Blue 1520 Calamine Blue (A) 1522 French Blue (A) 1525 Aqua Blue (A) 1530 Twilight Blue (A) 1540 Wedgwood Blue (A) 1560 Bluejay Blue (A) Blue 1605 1608 1610 1615 1620 1645 1650 1660 1685 1693 1698 Isle Blue (A) Storm Blue (A) Sky Blue (A) Atlantic Blue (A) Daphne Blue (A) Harvest Blue (A) Yacht Blue (A) Ultramarine Blue (A) Cobalt Blue (A) Dark Blue (A) Darkest Blue (A) Pink - Purple 1705 Petal Pink (G) 1708 Pastel Pink (G) 1710 Tallow Pink (G) 1715 Clover Pink (G) 1720 Mauve Purple (G) 1745 Fox Glove Purple (G) 1750 Orchid (G) 1760 Iris Purple (G) 1780 Grape Purple (G) Yellow - Orange - Red 1810 Buttercup Yellow (C) 4 1820 1830 1840 1850 1860 1870 1880 1890 Goldenrod Yellow (C) Marigold Yellow (C) Sunset Orange (C) Pumpkin Orange (C) Flame Orange (C) Orient Red (C) Flame Red (C) Victoria Red (C) Gray - Black 1905 Pastel Gray 1910 Pussywillow Gray 1912 Nude Gray 1915 Dove Gray 1920 Stump Gray 1940 Steel Gray 1960 Blue Gray 1980 Bluish Black (A) 1990 Grisaille Black (A) 1995 Black (A) 1996 Black (A) 1997 Crackle Base, Black (A) 1998 Soft Black (A) TRANSPARENTS Clear Transparent 2007 Soft Fusing Clear 2008 Crackle Base, Clear 2009 Soft Fusing Clear 2010 Soft Fusing Clear 2015 Golden Clear 2020 Clear for Silver 2030 Medium Fusing Clear 2040 Hard Fusing Clear Beige - Brown 2110 Wax Yellow 2115 Mars Brown 2120 Otter Brown 2130 Hazel Brown 2140 Russet Brown 2170 Van Dyke Brown 2190 Chestnut Brown (Continued on next page) Montana Swan Valley Copper 1160 Remick Road Swan Valley, MT 59826 Ph. (406) 754-2678 Fax.(406) 754-3053 Nevada Schlaifer Enameling Supplies, LLC PO Box 6776 Gardnerville, NV 89460 Ph. 1 800 525-5959 Web: www.enameling.com E-mail: sales@enameling.com New Jersey Folio Art Glass 73 Highway 34 South Colts Neck, NJ 07722 Ph. (732) 431-0044 FAX: (732) 431-1653 Rainbow Art Glass, Inc. 1761 Route 34 South Wall Township Farmingdale, NJ 07727 Ph. (32) 681-4984 New York Creative Tools & Supply Co. 135 W. 29th St, Suite 402 New York, NY 10001 Ph. (212) 279-7077 Fax.(718) 279-6886 Metalliferous, Inc. 34 West 46th St. 2nd Floor New York, NY 10036 Ph. (212) 944-0909 FAX (212) 944-0644 New Mexico Rio Grande 7500 Bluewater Rd. NW Abuquerque, NM 87121 Ph. (505) 839-3123 North Carolina Bedizen Ornaments, Inc. 509 N. West Street Raleigh, NC 27603 Ph. (919) 834-8634 Ohio The Urban Beader 18349 Quinn Rd. Chagrin Falls, OH 44023 Ph. (440) 570-5031 Oregon Washington Fire Mountain Gems One Fire Mountain Way Grants Pass, OR 97526-2373 Ph. (541) 956-7796 Frantz Art Glass & Supply 130 W. Corporate Rd. Shelton, WA 98584 Ph. (800) 839-6712 FAX (360) 427-5866 Web: www.frantzartglass.com supplies@frantzartglass.com Cline Glass Co., Inc. 1135 SE Grand Ave. Portland, OR 97214 Ph. (503) 233-5946 Fax. (503) 239-3766 www.clineglasscompany.com Fusion Headquarters 15500 N.E. Kincaid Road Newberg, OR 97132 Ph. (503) 538-5281 Georgieʼs Main Store 756 NE Lombard Portland, OR 97211-3502 Ph. (503) 283-1353 Pennsylvania Jean Van Brederode 7 Nita Court Mechanicsbug, PA 17050 Ph. (717) 919-7444 Texas Enamel Emporium 3523 Ripplebrook Drive Houston, TX 77045 Ph. (713) 433-1817 www.enamelemporium.com Hollander Glass Texas, Inc. 5455 Guhn Road Houston, TX 77040 Ph. (713) 460-0045 PMC Connection, Inc. 2414 East Wyr. 80 Ste. 190 Mesquite, TX 75149 Ph. (972) 329-3273 (866) 762-2529 Rock House Studio 1311 West Abram Arlington, TX 76013 Ph. (817) 274-1187 Spring Beads, LLC 421 Gentry Street, Ste. 202 Spring, TX 77373 Ph. (281) 288-9116 Utah Freshmanʼs 353 East 500 South Salt Lake City, UT 84111 Ph. (801) 521-6327 FAX (801) 575-6316 45 Enamelwork Supply Co. 1022 NE 68th St. Seattle, WA 98115 Ph. (206) 525-9271 Fax (206) 526-5797 1 800 596-3257 Northwest Art Glass 9003 151st Ave. NE Redmond, WA 98052 Ph. (425) 861-9600 Fax. (425) 861-9300 Seattle Pottery Supply, Inc. 35 South Hanford Seattle, WA 98134 Ph. (206) 587-0570 FAX: (206) 587-0373 Wisconsin Nasco 463 Park Street Fort Atkinson, WI 53538 Ph. (920) 563-2446 FAX: (920) 563-8296 School Specialty W6316 Design Drive Greenville, WI 54942 Ph. (888) 388-3224 FAX: (888) 388-6344 Thompson Enamel Distributors List Arizona Thompson Enamels can be purchased through these locations: Lonnieʼs, Inc. 1436 N. 44th Street Phoenix, AZ 85008 (602) 220-0494 toll free 1 877 566-6437 www.lonniesinc.com California A & A Jewelry Tools & Findings 319 West 6th St. Los Angeles, CA 90014 Ph. (213) 627-8004 FAX: (213) 627-1653 E-Mail: aatool@aajewelry.com Arrow Springs 331-2 Industrial Drive Placerville, CA 95667 Ph. (800) 899-0689 Ph. (530) 677-1400 FAX. (530) 677-1600 Web: www.arrowsprings.com C & R Loo 1732 Wright Ave. Richmond, CA 94804 Ph. (510) 232-0276 Fax (510) 232-7810 Leslie Ceramic Supply Co., Inc. 1212 San Pablo Avenue Berkeley, CA 94706 Ph. (510) 524-7363 FAX: (510) 524-7040 Nasco West 4825 Stoddard Road Modesto, CA 95356-9318 Ph. (209) 545-1600 FAX: (209) 545-1669 Colorado NAJA Tool & Supply, Inc. 6810 N. Broadway, Unit J. Denver, CO 80221 Ph. (303) 426-6284 Fax. (303) 426-8110 www.najatools.com D & L Stained Glass Supply 1440 W. 52nd Ave. Denver, CO 80221 Ph. (303) 449-8737 Fax. (303) 442-3429 Connecticut Bovano Industries, Inc. 830 South Main Street Cheshire, CT 06410 Ph. (203) 272-3208 FAX: (203) 250-7527 Gesswein 201 Hancock Ave. Bridgeport, CT 06605-2403 Ph. (203) 368-3752 FAX: (203) 335-0300 Florida The Art Glass House 3650 North US Hwy. 1 Cocoa, FL 32926 Ph. (321) 631-4477 1 800 525-8009 FAX: (321) 631 9565 Painting With Fire Studio 2428 Central Ave. St. Petersburg, FL 33712 Ph. (727) 498-6409 Spencer Art Studio 125 Fifth Ave. N. Safety Harbor, FL 34695 Ph. (727) 725-1562 Fax. (727) 797-3955 Georgia Pam East Designs 4950 Streamside Dr. Johns Creek, GA 30022 Ph. (678) 566-0447 Hawaii Schwartz, Inc. 1149 Bethel Street #400 Honolulu, HI 96813 Ph. (808) 538-1410 FAX: (808) 536-7029 Indiana American Art Clay Co., Inc. 6060 Guion road Indianapolis, IN 46254 Ph. (317) 244-6871 ABR Imagery, Inc. 3808 West Vernal Pike Bloomington, IN 47404 Ph. (812) 339-8947 44 Illinois Art Clay World USA, Inc. 4535 Southwest Highway Oak Lawn, IL 60453 Ph. (708) 857-8800 Dick Blick Company 864 Enterprise Ave. Galesburg, IL 61401 Ph. (309) 343-6181 FAX: (309) 343-3999 Ed Hoyʼs International 27625 Diehl Rd. Warrenville, IL 60555-3838 Ph. (630) 836-1353 FAX: (630) 836-1362 Maine Warg Enamel & Tool Center 10 Oak Hill Plaza Scarborough, ME 04074 Ph. (207) 885-9382 Fax: (207) 727 4226 www.paulinewargdesigns.com Maryland Weisser Glass Studio 4080 B Howard Ave. Kensington, MD 20895 Ph. (301) 571-8966 Fax: (301) 949-7292 Web: www.weisserglass.com Michigan Delphi Stained Glass / Delphi Creativity Center 3380 East Jolly Road Lansing, MI 48910 Ph. (517) 394-4631 FAX: (517) 394-5364 www.delphiglass.com C.R. Hill Company 2734 West Eleven Mile Road Berkley, MI 48072 Ph. (248) 543-1555 FAX: (248) 543-9104 Missouri Glasshopper Studio, LLC 13011 Olive Blvd. St. Louis, MO 63141 Ph. (314) 205-0220 Yellow - Green Yellow 2210 Soft Yellow (C) 2215 Egg Yellow (C) 2220 Chartreuse 2222 Flax Yellow 2230 Lime Yellow 2240 Olive (80 Mesh Only) Green 2305 Nile Green 2310 Peppermint Green 2320 Spring Green 2325 Gem Green 2330 Avocado (80 mesh only) 2335 Peacock Green 2340 Glass Green 2345 Dark Green (A) 2350 Grass Green Blue Green 2410 Copper Green 2420 Sea Green 2430 Beryl Green 2435 Turquoise Green Blue 2510 Cascade Blue (A) 2520 Aqua Blue (A) 2530 Water Blue (A) Blue 2610 2615 2620 2625 2650 2660 2680 Sky Blue (A) Periwinkle Blue (A) Bonnet Blue (A) Winter Blue (A) Heron Blue (A) Nitric Blue (A) Prussian Blue (A) Purple 2715 Rose Purple 2720 Harold Purple (G) 2740 Savor Purple (G) 2745 Passion Purple (G) 2747 Dark Lavender (G) 2755 Concord Purple (G) 2760 Mauve Purple 2780 Manganese Purple Pink - Red - Orange 2810 Geranium Pink (G) 2820 Pink (G) 2825 China Pink (G) 2830 Orange Red Ruby (G) 2835 Rose Pink (G) 2836 Raspberry (G) 2837 2838 2839 2840 2845 Orange (G) Red (G) Red (G) Mandarin Orange (C) Mikado Orange (C) (80 Mesh Only) 2850 Sunset Orange (C) 2880 Woodrow Red (C) Gray 2910 Elan Gray 2915 Oil Gray OPALESCENT 2061 Opalescent White (A) (80 Mesh Only) 2300 Opalescent Green (A) 2600 Opalescent Blue (A) (80 Mesh Only) 2800 Opalescent Red (G) 2001 Opal Jewel Effect (A) (Lump Only) COUNTER ENAMEL (See page 8) Medium Temperature - Low Expansion Enamels for Window Glass & 400 Series (Magnetic) Stainless Steel OPAQUE Normal firing temperature range: 1400-1500°F Coefficient of expansion: Approx. 80 linear expansion Available as 80 mesh powder and three sizes of lumps (small – 0.5 - 1.4mm; medium – 0.9 - 3.4mm; large – 2.4 - 4.8mm) White 5010 White Brown 5105 Cream 5107 Flesh 5109 Mustard 5110 Light Brown 5120 Coffee Brown 5125 Coral 5130 Redwood Brown 5180 Dark Brown Yellow 5250 Jonquil Yellow 5260 Golden Glow Yellow Green 5310 Light Green 5320 Willow Green 5330 Pea Green 5340 Jungle Green 5350 Jade Green Blue Green 5520 Emerald Blue Green 5530 Delft Blue Green 5540 Peacock Blue Green 5545 Teal Green 5550 Aqua Blue Green 5560 Dark Aqua Blue Green Blue 5610 5620 5650 5655 5660 Pastel Blue (A) Light Blue (A) Italian Blue (A) Royal Blue (A) Dark Blue (A) Pink Purple 5710 Petal Pink (G) 5 5720 5740 5750 5760 5780 Clover (G) Fox Glove Purple (G) Lilac (G) Light Orchid (G) Orchid (G) Orange 5820 Medium Orange (C) 5830 Orange (C) 5835 China Red (C) Red 5860 Flag Red (C) 5865 Briarwood Red (C) Gray - Black 5920 Light Gray 5960 Slate Gray 5990 Black (A) Medium Temperature - Low Expansion Enamels for Window Glass & 400 Series (Magnetic) Stainless Steel TRANSPARENT Normal firing temperature range: 1400-1500°F Coefficient of expansion range: 80 linear expansion Available as 80 mesh powder and three sizes of lumps (small – 0.5 - 1.4mm; medium – 0.9 - 3.4mm; large – 2.4 - 4.8mm) Clear Transparent 6000 Clear 6010 Milky Clear Brown 6110 Bronze Brown 6120 Persimmon Brown Beige - Yellow 6205 Light Sand Yellow 6210 Golden Brown 6215 Sandstone Brown 6220 Chinese Yellow Green 6310 Fern Green 6315 Meadow Green 6320 Pea Green 6335 Spruce Green 6340 Cactus Green 6350 Tartan Green Blue 6605 6610 6615 6635 6650 6680 Delphinium Blue (A) Empire Blue (A) Cloisonné Blue (A) Atlantic Blue (A) Cobalt Blue (A) Dark Cobalt Blue (A) Red 6860 Copper Ruby (B) High Temperature - Medium Expansion Enamels for Stained Glass and Hot Glass Blowing OPAQUE Normal firing temperature range for fusing: 1400-1550° F Coefficient of expansion: 90 linear expansion Compatable with Bullseye and Spectrum Glass Available as 80 mesh powder and three sizes of lumps (small – 0.5 - 1.4mm; medium – 0.9 - 3.4mm; large – 2.4 - 4.8mm) White 7010 White Brown 7105 Cream 7110 Light Brown 7120 Coffee Brown 7130 Redwood Brown 7180 Dark Brown Yellow 7250 Jonquil 7260 Golden Glow Yellow Green 7310 Light Green 7320 Willow Green 7330 Pea Green 7340 Jungle Green 7350 Jade Green Blue - Green 7520 Emerald Blue Green 7530 Delft Blue Green 7540 Peacock Blue Green 7550 Aqua Blue Green 7560 Dk. Aqua Blue Green Blue 7610 7620 7650 7655 7660 Pastel Blue (A) Light Blue (A) Italian Blue (A) Royal Blue (A) Dark Blue (A) Pink - Purple 7710 Petal Pink (G) 7720 Clover (G) 7740 Fox Glove Purple (G) 7760 Light Orchid (G) 7780 Orchid (G) Orange 7830 Orange (C) 6 Red 7860 Flag Red (C) 7865 Briarwood Red (C) Gray - Black 7920 Light Gray 7960 Slate Gray 7990 Black (A) TRANSPARENT 8005 8220 8221 8370 8640 8680 8750 8756 8760 Clear Chinese Yellow Orange Yellow Dark Green Cobalt Blue (A) Dark Cobalt Blue (A) Purple (A) Lilac Pink (G) Oberon Gold Heat Reflective Face Shield Reflects more than 99% of IR and UV radiation. A thin layer of gold (the most efficient reflector of radiant heat known) on the polycarbonate shield reflects radiation while allowing visible light to pass through for clear vision. Specifications: abrasion-resistant coating protects the gold layer on the outside, anti-fog coating on the inside. Adjustable ratchet headgear fits a variety of sizes. 8” h. x 14” w. x 0.080” thick window. GHS Gold Heat Shield $107.15 T-5B T-5C T-5 T-5 Jewelers Metal Hole Punch Puches two sizes - 1/16” (1.60mm) and 3/32” (2.30mm). Now with replacement punches. T-5 Jewelers Metal Hole Punch - $26.50 T-5B 3/32” Replacement Punch (Black) - $5.30 T-5C 1/16” Replacement Punch (Chrome) - $5.30 PDV-1 Powder Vibe PDV-1 $42.40 The new Powder Vibe for enamel powder application and control. Glass enamel powder flows out when vibrated. Great for applying lines, patterns etc. Could be used on a hot piece right out of the furnace. Also can be used while making lamp worked beads or glass on glass. Powder Vibe Set - powder vibe vibrating unit plus three brass powder tips. Sold only as a set. 43 Cloisonne Enameling and Jewelry Making Felicia Liban & Louise Mitchell Abridged and corrected Dover (1989) republication, published by Chilton Book Co., Radnor, PA, 1980. 164 illustrations. Index. Glossary. Suggested Reading. 256 pp. 6-3/8” x 9”. Paperbound. Cloisonne Enameling and Jewelry Making is divided into two parts. The first covers everything from designing the wirework for the “cells” or cloisons, making the enameling cup to hold the wires and enamels, and adding and firing the colors, to creating special effect with wire, foil and decals. Part II provides clear directions for creating handsome settings for pendants, rings, pins, buckles, boxes and a variety of other decorative items. Over 150 detailed illustrations and photographs illuminate each step of the procedures as well as the glorious finished products. “...the complete book on cloisonne enameling...encyclopedic in scope.” -Jewelersʼ CircularKeystone. TEP-037 $15.85 Enamel Bead Making (DVD & Booklet) with Pam East 30 minutes viewing time. This DVD and booklet is delightful! Pamela has analyzed the process of enamel bead making and arranged a series of easy how-to-do steps into logical fool proof procedures which are simple for the beginner to learn and, in many cases, will improve the effectiveness of the seasoned bead makerʼs work. The equipment and materials are described. She then demonstrates how simple bead making is when the procedures are followed. Basic steps are fully shown prior to practical and advanced procedures, including a couple which may be new to most viewers. TEV-300 $41.25 Enamelling on Copper for Beginners DVD This is a three-hour long, two-disk DVD set aimed particularly at complete beginners, but also contains useful information on a range of techniques for the more experienced. A great addition to your enameling library. TEV-600 $67.40 Enameling on Metal, by Núria López-Ribalta and Eva Pascual i Miró. The layout and illustrations set a new standard for visual appearance. Book contains six chapters - history, enamel as material, materials and tools, technical process, techniques, and step by step. TEP-038 $31.80 Creating Cloisonne Enameling A “How-to” DVD by Felicia Liban This step-by-step DVD will show you how to make a cloisonne pendant with all the information you will need for success. An added bonus is instruction for making a lost wax bezel. Running time - 70 minutes. TEV-700 $42.40 VideosVideos Lisel Salzer Video - Her Art and The Revival of Limoges Enamel Videotape (51 min.) 1986. A versatile artist in many techniques, Lisel Salzer has spent many years reviving the interest in the 16th century technique of Limoges Enamel. The video shows how she developed her interpretation of Limoges Enamel and illustrates each step in the creation of a portrait in enamel. Other subjects such as landscapes, flowers and animals are also shown. TEV-100 $83.20 ea. Enamels for Effetre (Moretti) Glass Coefficient of expansion: 104 linear expansion Available as 80 mesh powder or medium size lumps (0.9 - 3.4mm) Black 9660 Brilliant Blue (A) Opaques 9990 Midnight Black (A) Pink - Purple White 9710 Light Petal Pink (G) 9010 White Transparents 9720 Dark Petal Pink (G) Beige - Brown - Yellow 9400 Clear 9725 Flesh (G) 9105 Yellow Beige 9410 Wax Yellow 9730 Pink Flesh (G) 9110 Brown Beige 9415 Khaki 9740 New Purple (G) 9180 Dark Coffee 9425 Spring Green 9760 Light Orchid (G) 9250 Goldenrod 9434 Gem Green 9780 Dark Orchid (G) 9260 Praseodymium Yellow 9436 Glass Green 9790 Dark Purple (G) 9443 Beryl Green Green Orange - Red 9444 Turquoise 9320 Gray Green 9810 Peach 9452 Aqua Blue (A) 9330 Apple Green 9830 Mellon Orange (C) 9453 Water Blue (A) 9350 Moss Green 9835 Orange Red (C) 9463 Bonnet Blue (A) 9840 Bright Red (C) Blue Green - Blue 9466 Nitric Blue (A) 9850 Dark Red (C) 9520 Gray Blue Green 9475 Amethyst (80 mesh & 6/20 mesh) 9530 Blue Green (A) 9480 Cherry Pink (G) 9550 Aqua Marine (A) Gray 9605 Baby Blue 9920 Light Oxford 9620 Medium Blue (A) 9940 Oxford Gray 9650 Oxford Blue (A) ENAMEL SUPPLEMENTS - For Medium Temperature Enamels for Copper, Gold, Silver, Low Carbon Steel, Window Glass, Stained Glass, Bullseye and Spectrum Glass, Effetre (Moretti), 400 Series Stainless Steel and Pottery (A.K.A. Ceramics) Glass Painting - Enamel Powder A series of vitreous enamel powders which fuse slightly below 1200˚ F. Mix with your favorite painting medium. We recommend A-14 Water Miscible, page 15. 1 oz. 4 oz. 1 oz. 4 oz. GPP-15 Clear $4.30 $15.60 GPP-24 Black $4.30 $15.60 GPP-16 White $4.30 $15.60 GPP-25 Green Blue $4.60 $16.75 GPP-17 Green $4.60 $16.75 GPP-26 Navy Blue $5.05 $18.10 GPP-18 Bright Yellow $4.60 $16.75 GPP-27 Bright Green $4.30 $15.60 GPP-19 Bright Blue $5.05 $18.10 GPP-28 Teal Green $4.30 $15.60 GPP-20 Orange $4.60 $16.75 GPP-29 Caramel $4.30 $15.60 GPP-21 Bright Red $4.60 $16.75 GPP-30 Dark Brown $4.30 $15.60 GPP-22 Maroon $4.60 $16.75 GPP-31 Lemon Yellow $4.30 $15.60 GPP-23 Brown $4.30 $15.60 Glass Painting - Acrylic Enamels Nine pre-mixed glass colors in a water emulsion of acrylic polymer resin. All colors can be intermixed. Paint thin or buttery thick using brush, palette knife, spatula, etc. Dry one color, overlay with a second or third – one fire. Available in 1/3 fl. oz collapsible tube. GPA-16 GPA-17 GPA-18 GPA-19 GPA-20 Kiln Fired Glass - Update, a video by Harriette Anderson. Harriette Anderson, well known for her book Kiln-Fired Glass, has come out with a video which demonstrates detailed instructions on many different techniques using Thompsonʼ Medium Temperature-Low Expansion Enamels for window glass. A very instructional and entertaining video. TEV-200 $30.70 ea. 42 White Green Bright Yellow Bright Blue Orange GPA-21 GPA-22 GPA-23 GPA-24 GPA-SET $5.95 $5.95 $7.10 $7.10 $7.10 Bright Red Maroon Brown Black Set of Nine Colors $7.10 $7.10 $5.95 $5.95 $53.00 Glass Painting - Water Colors For use on clean, oil-free, vitreous surfaces. Colors can be used straight from the pan using water or a gum solution as the solvent. Colors can be diluted or intermixed with other colors. GPWC-16 White $4.75 GPWC-21 Bright Red $4.75 GPWC-17 Green $4.75 GPWC-22 Maroon $4.75 GPWC-18 Bright Yellow $4.75 GPWC-23 Brown $4.75 GPWC-19 Bright Blue $4.75 GPWC-24 Black $4.75 GPWC-20 Orange $4.75 GPWC-SET Set of Nine Colors $35.40 7 Opaque Enamel Threads ENAMEL SUPPLEMENTS - For Medium Temperature - Medium Expansion Enamels for Copper, Silver, Gold & Low Carbon Steel. Thin colored fibers for firing onto enamel for line effects or scrolling. 1 oz. and 8 oz. quantities. For Metal (Med. Temp., Med. Exp.) OTV-1 Black OTV-2 OTV-3 Blue OTV-4 OTV-5 Turquoise OTV-6 OTV-7 Yellow OTV-8 OTV-10 Orange Counter Enamel* *Color will vary. CE-3 Standard lead free backing enamel Standard price (See page 3.) For Window Glass OTV-11 Black OTV-13 Blue OTV-15 Turquoise OTV-17 Yellow OTV-20 Orange Jewel Effect Lumps For thick jewel-like appearances when fired. Excellent for bead making. (See page 23.) 1 oz. $5.85 White Red Green 8 color Mix 8 oz. $23.35 Liquid Form Enamel Water Base Small flowerette glass chips from Italy. The same as you see in glass paperweights. Sold as a mix of about 12 patterns. Chips can be split in half with cutters. Approximately 100 chips per ounce. Chip sizes may vary. MFC - $8.00/oz. Base Coats BC-1070 Medium fusing white BC-969A Low fusing clear transparent BC-303L Medium fusing clear transparent Ground Coat for Enameling Iron GC-16 Cobalt Blue Vitreco™ Floral Wafers & Buttons Liquid Form Enamel Colors For spraying or dipping. Add water to thin if necessary. Can be mixed to create many colors. Ceramic pigments may be added to additionally create other colors. Will produce crackle effects when fired over low expansion enamels such as the crackle bases, 1006 white, 1020 white, 2008 clear and 1997 black. 533 White 791 Hunter Green 767 Peacock Blue 799 Sky Blue 769 Goldenrod 800 Petal Pink Yellow 801 Hyacinth 770 Princeton Lavender 929 Chartreuse Orange 771 Flame Red 930 Chinese Red 772 Black 935 Robin Egg Blue 774 Chocolate 936 Beige 937 Coral 788 Cocoa Brown 940 Mouse 790 Imperial Blue Thin enamel wafers & buttons when fired result in beautiful mini enamel flowers. The wafers can be adhered to an enamel surface with an adhesive gum (Klyr-Fire) or they can be placed on an unfired, powdered enamel background. Fire at 1500-1550°F until flat. Wafers make small delicate flowers. Buttons make flowers about twice the size of wafers. Try both to achieve variation in size. Wafers are 2-4 mm dia. and spread to 5-7 mm when fired. Buttons are 5 mm dia. and will spread to 7-9 mm when fired. EF-7 White EF-8 Mixed Wafers EF-9 Mixed Buttons Please specify (EF-1, 2, 3, 6, or 7) wafers or buttons. $14.95 per 5 gr. packet (apprx. 250 wafers) OTV-12 OTV-14 OTV-16 OTV-18 OTV-19 Cat Whiskers for Window Glass Millefiore Yellow Blue Purple Pink (Med. Temp., Low Exp.) OTV-9 Cat Whiskers. Extra fine, short threads which are ideal for animal whiskers, very fine lines, etc. Sold only as a mix. ALV-1 Assorted transparent opaque mixture ALV-2 Assorted transparents ALV-3 Assorted opaques ALV-4 Variegated Venetian type ALV-5 Easy Scrolling 8 oz. $14.00 1 lb $25.80 EF-1 EF-2 EF-3 EF-6 White Red Green 8 color Mix 8 Liquid Form 1 pint. $23.60 1 quart $45.85 Dry Powder 8 oz. $8.60 5 lb. jar $77.50 Enamelling by Ruth Ball A&C Black Publishers, Ltd. 128 pages, 6-1/4" x 9-1/4" paperback; illustrated in color. A world known enamelist explains in detail the techniques, procedures, and methods she has leared and used over the years. The basics are covered. Then, she explains each of the traditional techniques in step-by-step detail and provides information about a number of modern methods available for exploration. There is a chapter on troubleshooting, remedy and repair, a short glossary, directory, bibliography and index. Enamelling is an extremely practical and user-friendly book, packed with useful information, advice, and easy to follow, step-by-step instructions. TEP-033 $28.65 ea. cloisonné on fine silver, shading techniques, large cloisonné wall pieces, cloisonné on steel, champlevé and basse taille, plique à jour, enameling vessel forms, painting techniques and materials, screening techniques and torch firing, use of decals, foils, overglazes, enamel as a resist, layering, sgraffito and charts. Also, a beginners course in enameling. There is also a large gallery of contemporary enamelists providing short biographies of each artist with full color photos of their work. Highly recommended. TEP-030 $44.90 Antique Enameled Jewelry by Dale Reeves Nicholls with Robin Allison 192 pps, full color, hardback. ISBN: 0-76431991-4. Schiffer Publishing Ltd., 4880 Lower Valley Rd., Atglen, PA 19310 This is the first book to focus exclusively on enameled jewelry. It contains a list of 77 manufacturers, going back to the late 1880s, with a list of makersʼ marks for about half of them. Another list provides names, and contact information, of 17 current dealers who purchase and sell antique enameled jewelry. Very helpful is a price guide and a chapter on how to collect – what to look for – how to find it. Over 450 color photographs with descriptions, size, history, and present location of each piece. Attention is given to significant developments in enameling techniques, and to the symbolism found in Victorian, Art Nouveau, and Arts and Crafts jewelry design during the nineteenth century and later. The most active manufacturers were from the United States, England, Germany, France and Norway. This is an important reference for jewelry designers, historian, and collectors. And, above all, it is a great source of ideas for the working enamelist! A great addition to your library. TEP-031 $ 55.05 Painting With Fire - Masters of Enameling in America, 1930-1980 by Harold B. Nelson and Bernard Jazzar Publisher: Long Beach Museum of Art, 288 pp., 279 color illustrations, 9” x 12”, soft cover. This catalog/book/document traces the development of enameling in the United States during a richly productive period of our history. The authorsʼ effort and perspective informs all of a heritage from within our borders as having importance, even if imported. The perspective is that of one written in three time periods of enameling during the 50 years covered in the catalog. Both Hal and Bernard elected to document a specific time period. To this end, history in the United States will have a collective reference point that will give evidence for the rest of time. By eliminating jewelry from the context, the art of enameling could be addressed as somethng more than personal adornment. TEP-034 $61.80 ea. Torches & Glass Enamel with Spencer Glass Enamel Bead Making by Joseph Spencer The best description we know for making enamel beads with copper tubing as a substrate. You will learn an excellent way to cut and prepare the copper bead, prior to enameling. There is a real secret here. He fully describes his procedures for enameling and a surefire method of removing the bead from the mandrel. Joe has developed a workstation which is organized for efficient bead production. TEP-035 $11.25 Designs for Glass Enameling: Techniques and Patterns by Kay Bain Weiner Eastman Publishing, 2005. 80 pages, paperback with CD. This is a companion to her previous book, Contemporary Glass Enameling. Easy to follow instructions and color photos demostrate how to apply various glass enamel techniques. Multipurpose patterns are offered in various sizes, motifs, and styles from traditional to abstract. 130 mix and match patterns in varying complexities included in book and CDROM, and can be used for fused, sandblasted or stained glass projects. CD contains all patterns in book, JPG format, 300DPI. Mac and PC Compatable. TEP-032 $31.75 Enameling on Metal Clay – Innovative Jewelry Projects by Pam East 41 This modern, full-color book features eight step-bystep jewelry projects. Pam East illustrates how you too can create beautiful wearable items with metal clay and enamel. TEP-036 $22.40 tastic patterns. A gallery of 31 pages shows a wide variety of finished work by 29 artists, including enamelists. Another chapter contains eight step by step projects. An excellent resource section provides references, suppliers, organizations, web sites, artist directory and bibliography. TEP-025 $33.65 ea. glass. Also, instructions for laminating and slumping glass, kiln firing, and annealing are included in this comprehensive text, giving the reader a wide overview of wet and dry enamel techniques. TEP-013 $19.10 ea. Kiln-Fired Glass (2nd Edition) by Harriette Anderson. 106 pages (color & b&w photos) hard back. Kiln-Fired Glass is Harriette Andersonʼs latest information-packed book on the art of kilnfired glass. The book covers selection of glass, annealing glass, cutting, kilns, molds, design techniques, plate glass, stenciling, silk screening techniques, stained glass and more. TEP-014 $36.20 ea. The Art of Enameling – Techniques, Projects, Inspirations by Linda Darty. Lark Books, 2004. 176 full-color pages; 10” x 9”; hardbound. Contents include Enameling Fundamentals (overview of enameling, materials, studio setup, metals for enameling, solders, metal and enamel preparation, applying and firing, finishing); Enameling Techniques (sifting, bassetaille, foils, painting, liquid enamels, cloisonné, champlevé, plique à jour, other techniques); and Projects. Over 130 artists have contributed images and information on enameling. TEP-027 $28.05 Introduction to Kiln Fired Glass - 17 Projects, by Mary Bergsma, Thompson Enamel, 1983, 34 pages, color and b&w illustrations, soft cover. Projects include: decorated plates, glass mobiles and Christmas tree ornaments. Emphasis in this booklet has been placed on well written step-bystep instructions. All these projects use Thompsonʼs Medium Temperature-Low Expansion Enamels for window glass. TEP-015 $11.65 ea. Beginnerʼs Guide to Enamelling by Dorothy Cockrell. Search Press, 2004. 64 full-color pages of instruction in the basics of enameling. Topics include a list of tools and equipment, safety, troubleshooting, color, and basic enameling techniques, which include stenciling, drawing techniques, rubber stamps, sgraffito and liquid enamels, using gold and silver foil and leaf, wet laying, raku firing and silver luster, copper beads, and much more. TEP-028 $20.20 Enamelling on Precious Metals, by Jeanne Werge-Hartley. The Crowood Press, Ltd., 173 pages, full color, hardbound, 8-3/4” x 10-1/2”, 2002. Enamels have fascinated the world for centuries and have been enjoying a resurgence over the last forty years. Enamelling on Precious Metals looks at how such stunning effects are achieved from the inspiration of design through the intricacies of the process to the skills of firing. Topics covered: an introduction of the enamels and the precious metals used for enameling; the details and alternative approaches to champlevé, cloisonné, plique à jour and other techniques explained; the work of leading enamellers including Jane Short and Fred Rich introduced; advice on working safely, and technical information about enamel colors and their firing temperatures. Lavishly illustrated with some 200 color photographs and line drawings. TEP-024 $50.55 ea. Metal Corrugation – Surface Embellish-ment and Element Formation for the Metalsmith by Patricia McAleer; 144 pages, soft cover, 81/2” x 11”, 263 photos (most in color), numerous illustrations and tables. Several years of research has gone into this book. It will inspire you to quickly create corrugated objects far beyond any traditional corrugated material you see in everyday life. Early in the book, tools, supplies, and equipment are explained, some tools costing less than $20 produce fan- Contemporary Glass Enameling: Fusing with Powders, Paints and Frit by Kay Bain Weiner. 168 pages, 200 color photos. The book instructs on how to decorate glass by brushing wet enamel paints or sifting dry enamel powders and frit using stencils, unique tools, and gadgets. Included are details on various paints, bruhes, expressive brush strokes, and distinctive enamel paint applications. Learn how to combine hot glass inclusions (sheet copper, gold and silver leaf, wire, mica flakes) to achieve special effects. Learn how to use decals, luster and gold and silver paints. The book also includes valuable information on fusible glass, enamel color selection, molds, kilns, firing and annealing. TEP-029 $40.25 40 Contemporary Enameling - Art and Techniques by Lilyan Bachrach. Schiffer Publishing Ltd., 2005. 256 pp., 550 color photos, 8-1/2” x 11” hard cover. Thirty four recognized enamel artists describe the working methods they have developed for their specialized enameling techniques. Topics include: cloisonné on fine silver beads, gold wire Acrylic Enamels Liquid Form Brushable Enamels Standard enamel powder bound and dispersed in a transparent, water emulsion of acrylic polymer resin. A multi-purpose artistʼs medium in brilliant colors. All colors can be intermixed. Paint thin or buttery thick using brush, palette knife, spatula etc. Dry one color, overlap with a second or third— one fire. Use in combination with water color enamels, enamel marking crayons, or 80 mesh enamel. Good silk screening potential, water clean-up. Available in collapsible tubes. Excellent for use as counter enamel. For optimum coverage sift 80 mesh dry enamel into freshly painted brushable enamel. Tamp down with fingers & dry. Cover front side of piece, dry and fire both sides at the same time. This minimizes warpage and eliminates a pickling step. These enamels can also be used as painting colors to achieve water color effects. Water soluble. LCE-1 LCE-2 LCE-3 LCE-4 LCE-5 Black Semi-Clear White Green Red Liquid Form 1 pint $23.60 1 quart $45.85 LCE-6 LCE-7 LCE-8 LCE-9 Catalog # Brown Blue Yellow Orange AC 906E AC 907E AC 908E AC 909E AC 910E AC 911E AC 912E AC 913E AC 914E AC SET Dry Powder 8 oz. $8.60 5 lb. jar $77.50 Overglaze Painting Colors Green Red Yellow Orange Brown Dry Powder 1 oz. $5.50 8 oz. $26.25 911E 912E 913E 914E $6.45 $7.65 $7.65 $7.65 $6.45 $6.45 $6.45 $6.45 $6.45 $56.05 Special Blends - Gold and/or Silver Bearing AC 915E Purple $7.95 AC 916E Rose Pink $7.95 AC 917E Yellow Ochre $7.95 AC SET-2 Set of three colors $23.05 These strongly pigmented, finely ground enamel colors can be used on a fired base coat of enamel, with or without an overcoat of transparent enamel. The eight color selection including 913 mixing white can be intermixed like paints to create most any color. 914E white liner can be used to produce intense white lines over dark colors. Other colors can be mixed with 914E to produce the pastel range. These colors can be applied with brush or pen for fine lines (see page 16). These colors are sold in both dry powder form (to be mixed with either oil or water based mediums of your choosing) or as a pre-mixed (pine) oil base color. 906E 907E 908E 909E 910E Green Red Yellow Orange Brown Blue Black Antimony White Titanium White Set of nine colors 1/3 fl. oz. tube Water Color Enamels For use on clean, oil free, vitreous surface. Colors can be used straight from the pan using water or a gum solution as the solvent. Colors can be diluted or intermixed with other colors. On white enameled steel tiles fire at 1450°F for 11/2 to 2 minutes. On white enameled copper fire at 1400-1450°F for 1-1/2 to 2 minutes or until glossy. Ideal on Thompson thin gauge Enameled Steel Plates. Fire at 1400-1450°F for 1-1/2 minute or until glossy. Water colors will produce transparency and excellent gloss when fired properly. Can also be used for shading with normal 80 mesh enamels. Blue Black Mixing White White Liner BWC-5 BWC-6 BWC-7 BWC-8 BWC-9 Oil Base 1 fl. oz. $11.90 1 pint $56.70 Clear Green Red Yellow Orange BWC-10 Brown BWC-11 Blue BWC-12 Black BWC-SET (Set of eight colors) Individual color - $4.85 each Set of eight colors - $33.35 9 Special Blends - Gold and/or Silver Bearing BWC-15 Purple BWC-16 Rose Pink Indiv. color - $6.00 ea. BWC-17 Yellow Ochre Set of 3 colors - $17.40 BWC-SET-2 (Set of 3 colors) Marking Crayons for Enamel Separation Enamel For drawing or marking on any clean, oil free, vitreous surface. Surface can be coated with light spray of hairspray or artistʼs adhesive prior to using crayons. Pre-enameled steel or copper can be slightly warmed prior to using crayons resulting in solid applications of crayon marks. Crayons are water soluble. Fire at 1350 - 1400°F for 2 minutes or until glossy. A cover coat of transparent enamel is desirable. Separation Enamel is painted in a linear design over 2-3 coats of pre-fired transparent and/or opaque enamels, with transparents being the final coat. When fired, the separation enamel changes the viscosity of the area producing a flowing or spreading somewhat similar to a marbleized effect. Dry and fire at 1450-1550°F for 2-5 minutes. SE-2 Separation Enamel Dry Powder 1 oz. $5.50 1 fl. oz. $11.90 Oil Base 8 oz. $26.25 1 pt. $56.70 EMC-6 Green EMC-10 Brown EMC-7 Red EMC-11 Blue EMC-12 Black EMC-8 Yellow EMC-9 Orange EMC-13 White EMC-SET (Set of eight colors) Overglaze & Underglaze Fine Line Black For fine detail and texture. P-1 Overglaze Black P-3 Underglaze Black Dry Powder 1 oz. $5.50 Oil Base 1 fl. oz. $11.90 Painting Enamel Kit Individual color - $5.55 each Set of eight colors - $39.55 Mechanical Pencil Crayons 8 oz. $26.25 1 pt. $56.70 For drawing or marking on any clean, oil free, vitreous surface. Surface can be coated with light spray of hairspray or artistʼs adhesive prior to using crayons. Pre-enameled steel or copper can be slightly warmed prior to using crayons resulting in solid applications of crayon marks. Crayons are water soluble. Fire at 1350 - 1400°F for 2 minutes or until glossy. A cover coat of transparent enamel is desirable. The painting enamel kit is for use with miniature and other painting techniques on enamel. These colors can be intermixed to make the largest pallet of painting colors that Thompson has to offer. Includes 14 ceramic pigments, 3 pink/lavender colors, mixing white, painting flux, a special painting oil and mixing instructions. PEMC-6 Green PEMC-10 Brown PEMC-7 Red PEMC-11 Blue PEMC-8 Yellow PEMC-12 Black PEMC-9 Orange PEMC-13 White PEMC-SET (Set of eight colors) PEMC-REFILL (Set of 12 enamel ʻleadsʼ) PK-1 $52.35 Painting Flux For enamel painting, mix 1-1/2 to 6 parts flux with one part ceramic pigment. Mix with suitable water base or oil media. Can be mixed with Overglaze Painting Colors (dry or oil base) including Mixing White - 913E. PF-1 1 oz. $5.40 Solid Color Decals Individual color - $3.10 each Set of eight colors - $22.25 Set of twelve crayon ʻleadsʼ - $6.15 Underglaze Decorating Pencils 8 oz. $25.70 Theyʼre back, and theyʼre better! Underglaze decorating pencils. Better working qualities, more intense, and still lead-free. Use this six-color set of highly pigmented ceramic pencils for shading and detailed drawing. Set consists of one of each: black, green, brown, rose, blue, and yellow. • Even Coat • Sharp Edges • Straight Lines • Fancy Curves • No Sifting • No Dust • No Wet Charging • No Contamination • No Stencils • Apply to a fired surface, dry and fire. Not for use directly on metal. Use as an accessory or supporting material. For Children, Camps, Elder Hostels— All thatʼs needed is Enameled Steel Plates, Decals and a Furnace. ED-906E ED-907E ED-908E ED-909E Green Red Yellow Orange ED-910E ED-911E ED-912E ED-913E 12” x 8-3/4” sheet - $15.35 6” x 8-3/4” sheet - $8.00 TP-SCD Trial packet - $15.35 (3” x 4” sheet of all 8 colors) P-4 Underglaze Pencils Individual Color (specify color) - $11.10 each Set of six pencil colors - $59.45 *Note - Sharpen with a blade or knife only. Do not use a pencil sharpener. Brown Blue Black White Pink/Lavender Painting Colors 10 1705P Petal Pink 1708P Pastel Pink 1715P Clover Pink Dry Powder 1 oz. $20.70 Publications priate tools and materials. She also addresses more detailed applications such as design, form, and color while relating many details regarding the history of enamel in the fine arts. Complete with rich photographs, Seelerʼs text tells us how to create these fine pieces of art and provides us with impressive examples of the finished portraits, jewelry and other precious objects. By using an encouraging tone and user-friendly format, Seeler has presented a unique, well-balanced book which belongs in any art classroom as well as in any art-lovers library. TEP-010 $64.85 ea. Thompson Enamel Workbook by Woodrow Carpenter, Bill Helwig and Tom Ellis, 1997. 40 pages (b&w drawings and illustrations) soft cover. Thompson Enamel Workbook is the long awaited enamel technical manual that is a must for every enamel workshop. Topics covered include: firing times & temperatures, softening point, fusion flow, expansion, importance of particle size, metals suitable for enameling, enameling procedures, metal preparation, physical characteristics of enamels, furnaces and equipment, liquid enamel application techniques i.e. spraying, dipping etc., painting media and techniques, trouble shooting and much more. TEP-001 $10.10 ea. Dictionary of Enamelling by Erika Speel. 1998, 288 pages. The splendor of the Pala dʼOro, the mystery of the Alfred Jewel, the genius of Renaissance goldsmiths. The Dictionary of Enamelling is the first book to provide a comprehensive guide to this most diverse of the decorative arts. Indispensable for anyone interested in the evolution of the enameling techniques, the book includes some 400 entries covering every aspect of its history. There are entries on key pieces, individual enamelers, designers, schools, techniques, and the major achievements of every era. The knowledge and insight of Erika Speelʼs account are supported and enhanced by a brilliantly researched collection of 200 illustrations, half of which are in full color, portraying the most dazzling and important pieces, a unique visual record of enameling history. TEP-011 $139.30 ea. Beginners Enameling Course by Woodrow Carpenter, 1981. A twelve lesson series designed to lead a new student into the fundamental techniques of enameling. Excellent for schools and camps. The booklet contains a brief history on enamels and a reference bibliography on enameling. TEP-002 $5.05 ea. Enamel Bead Making by Carol and Bob Oliver, 1972. A small pamphlet teaching enamel bead making with a propane torch. Small copper tubes are used as supports. A wire stringing technique is also illustrated. TEP-004 $3.35 ea. Copper Enameling by Gerry Coleman, Marguerite Koenig and Edna Berry, Fort Worth, Texas: Western Galleries Publishing Co., 1973. A pictorial instruction booklet on basic enameling techniques including scrolling, cloisonné, and champlevé. TEP-005 $4.50 ea. On Divers Arts, Theophilus. Paperback, 1979, 216 pages illustrated. Translated from Latin by John G. Hawthorne and Cyrill Stanley Smith. Dover Publications, Inc. New York. “I have made it my concern to hunt out this technique for your study as I learned it by looking and listening.” On Divers Arts, c. 1122, is the oldest extant manual on artistic crafts to be written by a practicing artist. Theophilus teaches, with rigorous attention to fact but also with great reverence, the making of pigments for fresco painting, the manufacture of glue, the technique of gold leaf on parchment (the first recorded European reference to true paper), how to blow glass and design stained glass windows, fashion gold and silver chalices, make a pipe organ and church bells. Precise instruction (earliest known instruction) on enameling, chasing, repoussé, niello, and beaded wire work prove Theophilusʼ first- hand knowledge of his craft. TEP-012 $14.85 ea. The Enamellistʼs Handbook by Elizabeth and Colin Fraser-Davies, Pitman Publishing, 1988. The Enamellistʼs Handbook is a textbook on an art form which has had a low profile in New Zealand, with most books written for a classic European culture where supplies are plentiful. Making do with different materials and adapting techniques is the trademark of antipodean enamelists. TEP-007 $34.80 ea. Enamel Medium For Fine Art, by Margarete Seeler. 292 pages, hardback, color & b&w photos, b&w drawings. In her comprehensive analysis, Enamel Medium For Fine Art, Margarete Seeler not only explains the basics of working with enamel, but also imparts her years of wisdom through helpful tips and ideas for dealing with potentially problematic situations. Margarete Seeler provides an accessible guide for the serious student by discussing the appro- 39 Glass Enameling by Kay Bain Weiner. 64 pages (color and b&w photos) paper back. Glass Enameling is an invaluable and unique guide for creating exquisite plates, sun catchers, and jewelry with glass enamels. This book describes glass cutting, stencil construction and decorating Bead Stringing Accessories Brass Eye and Head Pins (per 100) EP-1 1-1/8” long from under eye $3.65 EP-2 1-5/8” long from under eye $3.65 Tiger-Tail Wire These special twisted 3-strand plastic coated wires are designed for stringing beads. They resist wear and strand breakage. TT-1 #12 wire (thin) $7.45/100 ft. TT-2 #18 wire (thick) $8.85/100 ft. EP-3 1-1/8” long from under head $4.35 EP-4 1-5/8” long from under head $4.35 Crimp Beads (per 100) CB-1 Large hole used for looping tigertail end. $5.80 CB-2 Seamless crimp tube 1/8” long $9.15 CB-3 For clamping nylon monofilament line. $8.70 Supplemental Items for Enameled Pieces Newallʼs Glue. Super strength cyanoacrylate adhesive. Instantly and permanently bonds rubber, metal, glass, pottery, porcelain, and plastic. Sets in seconds without mixing or heat. Single drop holds up to 5000 lbs. Store in a cool place. NG-1 3 gr. tube $2.85 Bead Caps (per 100) BC-1G Gold color $5.20 BC-1S Silver color $5.20 BC-2G Gold color $9.10 BC-2S Silver color $9.10 BC-3G Gold color $7.05 BC-3S Silver color $7.05 Silky Smooth Black Cord. 100% Rayon, 1/8” dia. Excellent for use as a cord for enameled pendants. SC-1 $1.20 yd. BC-4G Gold color $22.80 BC-4S Silver color $22.80 Spacer Beads and Bead Tips (per 100) SB-1G Gold 2-1/2mm smooth $5.25 SB-1S Silver 2-1/2mm smooth $5.25 SB-2G Gold 5mm smooth $9.15 SB-2S Silver 5mm smooth $9.15 SB-3G $4.95 SB-3S $4.95 SB-4G SB-4S Miniature Nuts & Bolts For Securing Enamels. There are three sizes of miniature nuts & bolts. The flathead bolts are made of brass, 1/2” long. 90-B bolt is 3/64” dia.; 80-B bolt is 6/64” dia. and 72B bolt is 7/64” dia. Gold 2-1/2”mm corrugated Silver 2-1/2”mm corrugated Gold 5mm corrugated $12.70 Silver 5mm corrugated $12.70 90-B 90-N 90-W 80-B 80-N 80-W 72-B 72-N 72-W SB-5G Gold 5mm round filigree $31.80 SB-5S Silver 5mm round filigree $31.80 SB-6G Gold 6x3mm rice $8.95 SB-6S Silver 6x3mm rice $8.95 BT-1 .029” hole $4.35 38 Bolt $ .55 ea. Nut .40 ea. Washer .35 ea. Bolt .45 ea. Nut .40 ea. Washer .35 ea. Bolt .45 ea. Nut .40 ea. Washer .35 ea. 1 doz. 1 doz. 1 doz. 1 doz. 1 doz. 1 doz. 1 doz. 1 doz. 1 doz. $5.35 $2.80 $2.75 $4.05 $2.80 $2.75 $4.05 $2.80 $2.75 Enamel Marking Pens (cont.) Use on enamel for metal, window glass, stained glass, Bullseye and Spectrum glass, and glazed ceramics. Ceramic Pigments The ceramic coloring compounds are used like water colors for shading and details. They are applied to the surface of enamel, window or stained glass. The underlying enamel/glass will be stained by firing. Since these are highly pigmented powders, they are used in thin, film-like layers. They are not an enamel in themselves. They should be covered with a transparent enamel on the finish firing. Sold in 20 gram amounts per pigment. Can be mixed with Painting Flux or Mixing White. OC-16 Blue $2.55 OC-18 Blue $5.90 OC-32 Yellow $3.55 OC-50 Black $8.00 OC-70 Red $7.70 OC-71 Orange $7.20 OC-82 Yellow Brown $1.95 EMP-12 Enamel Marking Pen–Black $6.10 EMP-13 Enamel Marking Pen–White $6.10 EMP-15 Enamel Marking Pen–A-5 Oil $6.10 New Series - Marking Pens Ball Point Pens. Store in horizontal position. Shake vigorously before use. To write or draw, hold pen perpendicular to a vitreous surface, then slightly squeeze plastic barrel. Fuses at 1250˚–1450˚F. Use on enamels for metal, window glass, stained glass, Bullseye and Spectrum glass, and glazed ceramics. OC-83 Brown $1.95 OC-85 Red Brown $1.95 OC-95 Red Purple $18.80 OC-191 Green $1.95 OC-195 Blue $3.85 OC-169 Tan Yellow $3.20 OC-170 Blue Green $3.05 EMP-16 EMP-17 EMP-18 EMP-19 EMP-20 EMP-21 EMP-22 EMP-23 EMP-24 EMP-SET Grisaille Teaching Kit Special instruction kit written and designed by a leading expert on grisaille. The kit includes step by step instruction, 150 and 325 mesh quantities of 1040 opaque white, 325 mesh 1030 opaque white, 80 mesh 1990 grisaille black, glass petri dish, fine brush, 100 mesh screen, Klyr-Fire, 2 copper trays, and 19 step by step black & white photos of an original grisaille work in process, from start to finish. $6.10 ea. $6.10 ea. $6.10 ea. $6.10 ea. $6.10 ea. $6.10 ea. $6.10 ea. $6.10 ea. $6.10 ea. $48.60 ea. Painting & Screening Enamels Our GPP dry powder (page 7), premixed in our A-14 (page 15), water miscible screening medium. The consistency is perfect for screening or painting, and the shelf life is fantastic. All colors can be intermixed. If slight thinning is desired for special applications, use A-14. For a pleasant surprise, mix well with an equal volume of water and it is marvelous with a quill pen. Fine line colors with no aggravation. Clean up with water. When used with screens made with waterdeveloped photo emulsion, clean with mineral spirits. GTK-1 $84.15 Enamel Marking Pens Ball Point Pens. Store in horizontal position. Shake vigorously before use. To write or draw, hold pen perpendicular to a vitreous surface, then lightly squeeze plastic barrel. Black and white pens will fire making a permanent mark. Use oil pen to write or draw, then sift coat of 80 mesh enamel over oil, dump off excess and fire to make apermanent mark. White Green Bright Yellow Bright Blue Orange Red Maroon Brown Black Set of All Nine Pens SEC-16 SEC-17 SEC-18 SEC-19 SEC-20 11 White Green Bright Yellow Bright Blue Orange SEC-21 SEC-22 SEC-23 SEC-24 Bright Red Maroon Brown Black 1/2 fl. oz. $6.60 1 fl. oz. $11.75 8 fl. oz. jar $66.30 SEC-SET (Set of all 9 colors; 1 oz. A-14), 1/2 fl. oz. each $46.40 Carefree Lusters® * MATERIAL SUPPLEMENTS Used as a surface application which results in a “metal-flake” or “sparkle” appearance. Stabilized for glass, glazed ceramic and enameled metal applications. Available in twelve lustrous colors (clear silver, purple, blue, For Enamels for Copper, Silver, Gold, 300 & 400 Stainless Steel, Window Glass and Stained Glass Citric Acid for Edinburgh Etch ETCH-2 Powder-form Citric Acid (Anhydrous). Mix with PCB Etchant (ferric chloride), available from Radio Shack. Resulting etching solution has greater etching ability and longer life than ferric chloride alone. ETCH-2 1 oz. Citric Acid Powder in plastic container - $3.75 green, yellow, orange, red; metallic red, orange, yellow, gold & green). See the color chart for a display of all twelve colors on both black and white backgrounds. Carefree Lusters® are supplied as dry powders, water color waxes, and solid & patterned decal sheets (decals not available in all colors). Pattern Designations: Glass Etching LTK-1 ETCH-3 Etchall® Dip ʻn Etch is a reusable liquid with the consistency of water that gives an etched mat finish to most vitreous surfaces. Dip ʻn Etch is easy to use and takes only a few minutes. Note: ETCH-3 cannot be shipped by air. 4 fl. oz. jar - $23.80 Water Colors All 12 Colors, 10 gm. ea. Solid Decals Trial Pack, 3” x 4” sheets, 7 Colors 12” x 8-3/4” sheet, Specify Color Half Sheet, 6” x 8-3/4”, Specify Color LD-2 LDP-1 LDP-2 P-7B - Yellow Green, Lilac, Medium Blue, Medium Green, Light Brown, Gray, Blue Green, Dark Brown $138.15 Single Color, 10 gm., Specify Color LD-1 AMACO underglaze pastel crayons for decorating. Use on mat surfaces and fire. Two eight-color kits are available: P-7A - Turquoise, Yellow, Rose, Dark Blue, Brown, Dark Green, Black, White All 12 Colors, 20 gm. ea. WCL LTK-2 Underglaze Crayons $13.85 20 gm. Jar, Specify Color WCL-SET REST-1 Resist Gel forms a protective barrier against Dip ʻn Etch or Etching Cream. This barrier prevents the surface from being etched. Comes in a bottle with a dispensing tip. Free hand a design by dispensing directly from the bottle, or brush evenly on a larger surface. 4 fl. oz. bottle - $13.10 Trial Pack, 12 Colors LR-1 LR-SET ETCH-4 Etchall® Etching Cream can be used to convert a glossy vitreous surface into a mat surface. The surface can be kept as is for itʼs textural appearance, or used as a substrate for easily drawing with ceramic pencils, crayons or lead pencils. Upon refiring, the enamel surface will return to itʼs original highgloss surface. A transparent flux or color may be applied before the refiring if desired. Note: ETCH-4 cannot be shipped by air. 4 oz. jar - $21.40 1 Box - $26.15 Powders Patterned Decals 11” X 8.5” Sheet, Specify Color & Pattern Half Sheet, Specify Color & Pattern $6.25 $69.10 $12.50 $13.10 $6.85 $13.10 $6.85 “Brick” - A “Circles” - D “Nouveau” - B “Flower Stripes” - E “Scroll” - C “Vines” - F “Small Rose” - G 12 $12.50 Findings & Supplemental Items for Enameled Pieces Key Rings with Chain $4.30 doz./$42.65 gr. F-110C - Copper F-110N - Nickel Bar Pins (plated - not for soldering) Economy Instant Bezel Insert the enamel, squeeze together, attach threaded knob for a finished looking pendant. E1B F-111N V-6-D Edge is milled. Knob has a hole for a jump ring. Material is nickel-plated brass. V-6 domed copper blank included. EIB – Set; bezel w/V-6-D copper $ 2.85/set V-6-D – Domed copper only $9.00/doz. F-111N – Bezel, only $ 2.55 ea. Bar Pin $3.25 doz./$33.00 gr. F-150C 3/4” - Copper F-150N 3/4” - Nickel Bar Pin $3.40 doz./$33.70 gr. F-151C 1” - Copper F-151N 1” - Nickel Bar Pin $3.45 doz./$34.05 gr. F-152C 1-1/4” - Copper F-152N 1-1/4” - Nickel Bar Pin $3.55 doz./$35.40 gr. F-153C 1-1/2” - Copper F-153N 1-1/2” - Nickel Stick Pin with Cap $7.45 doz./$74.95 gr. F-160NS - Nickel-Silver Walnut Accessories W-100 $43.35/ea. Set includes: Walnut Box, 4” x 9” x 1-1/4”; Cork Lid Back; Copper Top. W-100A - Additional Copper Top - $5.25 ea. W-106 $30.35/ea. Coaster Set includes: Walnut Base - 3” x 71/2” x 11/16”; 4 Copper Coasters CO-14 - Additional Copper Coaster $2.40 ea. Military Bar with Caps $4.75 doz./$47.70 gr. F-161P 2” Plastic F-162P 2-3/4” Plastic Nickel Plate Settings for Ovals, Circles and Squares F-179 Oval 25 x 18mm $3.15 doz./$31.80 gr. F-175 Circle 1/2” F-176 Circle 7/8” $3.35 doz./$33.65 gr. ʻRedi-Madeʼ Brooch Set Three-piece brooch sets consisting of a bezel with bendover tabs, back plate with spotwelded bar pin, and a copper disk, ready for enameling. Bezel is nickel-plated brass, back plate is nickel-plated steel. Both are 0.020” (0.5 mm, 24 B&S gauge) thick. Copper disk is 0.031” (0.8 mm, 20 B&S gauge) thick. F-178 Square 3/4” $4.45 doz./$44.00 gr. Money Clip, Dollar Mount $25.40 doz./$260.10 gr. F-120C - Gold Plate F-120N - Nickel Plate Barrette Mount $4.45 doz./$44.15 gr. F-200 1-3/4” - Nickel Plate Oval 18 x 13mm $5.60 doz./$56.20 gr. F-181; F-182 (with loop) Oval 25 x 18mm $7.45 doz./ $75.15 gr. F-183; F-184 (with loop) 37 BRO-1 49 mm (1.93”) O.D. disk with slight dome. BRO-2 36 mm (1.42”) O.D. disk with slight dome BRO-3 45 x 30 mm (1.77” x 1.18”) oval disk, slightly domed. BRO-4 56 x 30 mm (2.20” x 1.18”) obtuse angled flat disk. $6.65 set $5.70 set $5.70 set $6.35 set Findings & Supplemental Items for Enameled Pieces Bolo Cord $10.10 doz./$101.10 gr. F-72B - Black F-72BR - Brown F-72W - White Earrings and Ear Clips Flat 8mm pad post for pierced ears $2.85 doz./$26.20 gr. F-40 - Surgical Steel Ear Wire F-41 - Gold Filled $4.35 doz./$43.60 gr. F-42 - Surgical Steel $3.05 doz./$30.30 gr. Simulated Pierced Ear $4.35 doz./$43.60 gr. F-45C - Copper F-45N - Nickel French 8mm Ear Clip $2.05 doz./$20.95 gr. F-48 - Nickel Plate Neck Chains. Plated (Spring ring clasp attached.) 18” Curb $ .75 ea./$7.05 doz. F-5GL - Gilt F-5S - Silver color 24” Rope $ 1.25 ea./$14.05 doz. F-6GL - Gilt F-6S - Silver color 24” Cable $ 1.15 ea./$11.25 doz. F-7GL - Gilt Chains. (Sold by the foot.) Cable $1.20 ft. F-15C - Copper F-15N - Nickel Cable $1.75 ft. F-16C - Copper F-16N - Nickel Curb $2.15 ft. F-17C - Copper Curb $1.25 ft. F-18B - Brass Curb $1.65 ft. F-19C - Copper Rope $1.50 ft. F-20C - Copper Cable $1.50 ft. F-21B - Brass Leather Thong 1/8” x 33” $ .90 ea./$8.80 doz. F-22 - Black F-23 - Brown Snaps & Jump Rings for Chains & Bracelets Pendant Bail $1.75 doz./$17.05 gr. F-90C - Copper F-90N - Nickel Bracelet Snap $1.60 doz./$15.90 gr. F-92 - Copper 3/16” Fold Over Snap $3.60 doz./$35.40 gr. F-94C - Copper F-94N - Nickel Round Jump Ring (* Apprx. pieces) F-95C 3/32” - Copper $ .90 1/4 oz. (*40) F-96C 1/8” - Copper $ .90 1/4 oz. (*40) F-95N 3/32” - Nickel $ .90 1/4 oz. (*40) F-96N 1/8” - Nickel $ .90 1/4 oz. (*40) F-97C 3/16” - Copper $1.20 1/2 oz. (*90) F-98C 7/32” - Copper $1.20 1/2 oz. (*90) F-97N 3/16” - Nickel $1.20 1/2 oz. (*60) F-98N 7/32” - Nickel $1.20 1/2 oz. (*60) Tie Tacks - Clips - Cuff Links Tie Tack with Chain $8.10 doz./$90.50 gr. F-60 - Nickel Tie Clip $4.60 doz./$52.50 gr. F-61C 1-1/2” x 1/4” - Copper F-61N 1-1/2” x 1/4” - Nickel Cuff Link, Spring Type $3.00 doz./$30.35 gr. F-65C - Copper F-65N - Nickel Bolo Slide, for string use $1.60 doz./$17.85 gr. F-70C - Copper F-70N - Nickel Bolo Tie Tip $2.95 doz./$29.75 gr. F-71C - Copper F-71N - Nickel Oval Jump Ring $ 1.50 1/2 oz. F-99C 7/32” - Copper F-99N 7/32” - Nickel F-99B 7/32” - Brass 7mm Spring Ring $1.60 doz./$17.30 gr. F-100C - Copper F-100N - Nickel F-100B - Brass 36 Screw Clasp 6mm $3.00 doz./$30.35 gr. F-101G - Gold F-101S - Silver Screw Clasp 6mm $2.65 doz./$29.40 gr. F-102G - Gold F-102S - Silver Liquid Metals Cloisonné Wire M-12 Bright Liquid Gold 2 gram bottle $18.65 M-13 Bright Liquid Palladium 2 gram bottle $11.70 M-14 Essence for thinning 1/2 oz. bottle $7.25 M-15 Mother of Pearl 1/2 oz. bottle $5.30 M-4F Copper Cloisonné Wire (Flat) - 18 ga. x 30 ga. (.040” x .010”) flat wire, 50 ft. coil $16.30 coil M-4R Copper Cloisonné Wire (Round) 18 ga. (.040) round wire, 50 ft. coil $10.45 coil Gold Pen M-5F Silver Cloisonné Wire (Flat) - 18 ga. x 30 ga.(.040” x .010”) fine silver flat wire $13.35/4 ft. coil Pre-filled disposable precious metal pen for delicate decorating on enamel, glass or ceramics. Easy application for firing. Fires at 1150˚-1300˚F GMP Gold Pen $27.05 M-5R Silver Cloisonné (Round) - 20 ga. (.032”) fine silver round wire $17.85/4 ft. coil Plique-à-jour Wire Gold, Silver & Copper Foil WSS-1 Fine Silver Flat Wire - (.040” x .010”) $3.35 ft. GF-3 Gold Foil (fine gold) .03mm thick, 7-7/8” square sheet $60.25 sheet WSS-6 Sterling Silver Step Bezel Wire $8.25 ft. SF-1 Silver Foil (fine silver) 3-1/4” x 3-1/4” sheets $43.25/book (25 sheets) $1.85 sheet Plique-à-jour Supplements SF-2 Silver Foil (fine silver) 4.5” x 4.5” sheets $81.85/book (25 sheets) $3.65 sheet SLD Eutectic Silver Solder - Now easier to use! Sold in 1/16” dia. wire (1/4 Troy oz.). Just snip off pieces as needed. Still withstands enameling temperatures and has a melting point of apprx. 1460°F. 1/4 Troy oz. will give you a strip 33-1/2” long. 1/4 Troy oz. coil $10.90 Silver Tooling Foil - .004” fine silver foil M-6S - 6” x 6” square $98.45 M-6R - 6” x 12” rectangle $196.90 M-1 Copper Tooling Foil - .004” soft copper tooling foil - 12” wide (4 ft./lb.) - Sold by the running foot. $9.50 ft. M-7 Malleable Copper - .010” soft malleable copper - 12” wide - Sold by the running foot. $15.35 ft. Oxidized Steel Plates for soldering pliqueà-jour wires - 3 sizes. 18 ga. OSP-1 2” square OSP-2 1-1/2” square OSP-3 1-1/2” x 2” rectangle $.75 ea. Visit Thompson Enamel on the internet at: http://www.thompsonenamel.com/ Our entire product line is available for purchase on our safe and secure shopping cart enabled website. 13 Metal Cleaner Holding Agents - Mixing Media PB-1 Penny Brite - Makes cleaning copper a breeze without using acid. It brightens your copper while completely rinsing off with only warm water. Specially formulated to clean copper, stainless steel, and brass. Instant cleaning action, no rubbing or buffing. Contains no ammonia, chlorine, sulfuric acid or carcinogenic benzene derivatives— no rubber gloves needed. Biodegradable and safe for the environment. Not affected by freezing or hot temperatures. $6.15/7oz. container A-1 Klyr-Fire™ (Water base) The standard of the enameling arts. Mix 50/50 with water for spray adhesive, use full strength for wet packing or adhering cloisonné wires. $5.80 pt. $26.20 gal. New Items Metal Clay Enameling Kit A-2 Agar (Water base) Organic gum from the ocean. Non-foaming. Excellent for spraying. Sold as a solution. $3.70 pt. $18.00 gal. A-3 Enamel Holding Agent (Water base) Similar to Klyr-Fire, but slightly more viscous. $3.70 pt. $18.00 gal. Pickling Agents A-4 Squeegee Oil. A special oil blend which fires ash free. Use with dry painting enamels or ceramic pigments. $3.60/2 fl. oz. $12.15 pt. C-2 Sparex No. 1 A dry commercial compound to be mixed with water for pickling iron and steel prior to enameling. Makes one gallon. $6.90/2-1/2 lb. can A-5 Thinning Oil No. 5. This oil disperses a high percentage of powder. Paints very well and has the drying characteristics many artists like. $4.55/2 fl. oz. $12.10 pt. C-3 Sparex No. 2 A dry commercial compound to be mixed with water for pickling copper and non-ferrous metals prior to enameling. Makes one gallon. $6.90/2-1/2 lb. plastic bag A-8 Screening Oil. This oil is the premium screen printing oil for high resolution screen printing. $4.60/2 fl. oz. $15.50 pt. K-7 Tongs. 9” copper tongs for acid solutions. $11.65 ea. A-10 Oil of Clove. For washes. $11.00/2 fl. oz. $58.50 pt. A-11 Oil of Lavender. For details. $18.70/2 fl. oz. $62.90 pt. A kit containing the essentials to enamel your METAL CLAY projects. Use your present kiln. Contains a firing rack (F-4), trivet (TPT-2), firing fork (K-4), tools for applying enamel (IT-1 Spatula, IT-3 Spreader, M-16B Sable Brush, & SM-2 Sifter), holding medium (2 oz. A-1 KlyrFire), ten sample size colors of enamel, and instructions. MCE-KIT $ 47.65/ea Sterling Silver Cinch Mount Sets One-piece sterling silver cinch mounts provide the perfect bezel for your cloisonné or miniature portrait enamels. Stone the edges, insert into bezel, squeeze with needle nose pliers. Choose flat or domed copper blanks for BRO-5 & BRO-6. In addition to V-39 domed copper, SPS-16 silver plated steel blank can be used with BRO-7. The gallery wire is 3.4mm (0.135”) wide filigree. A-12 Painting Oil for Miniatures. This painting oil is used in the Painting Enamel Kit. It is a blend of organic oils which have a unique viscosity appropriate for miniature painting. $2.70/2 fl. oz. Oxide Inhibitor C-4 Scalex Thompsonʼs excellent inhibitor for the prevention of scale formation on exposed metal surfaces as enameled items are being fired. Paint it on thin. Let it dry. Scalex falls off as fired items cool, exposing a clean metal surface. Sold in liquid form. $14.10 pt. $45.65 gal. 14 A-13 Acrylic Medium (Water base) This medium in used in our Acrylic Enamels. Use it also for: 1) Making acrylic painting colors from any 325 mesh enamel. 2) Screen printing. Thin with water as needed. 3) One part medium, three parts water for applying Thompsonʼs BWC Water Color enamels. Paint, dry, apply subsequent colors, dry, fire once. 4) Spray medium. Thin with water as needed. $3.35/2 fl. oz. $10.60/8 fl. oz. (Includes Copper Insert) BRO-8 V-6 BRO-5 BRO-6 BRO-7 BRO-8 BRO-6 BRO-5 V-20 V-30 BRO-7 V-40 BRO-7 side view V-29 V-39 40 x 30 mm (1.578 x 1.181”), plain, with V-30 Flat or V-20 Domed copper blank. 30 x 22 mm (1.181 x 0.869”), plain, with V-40 Flat or V-29 Domed copper blank. 25 x 18 mm (0.987 x 0.710”), gallery wire, with V-39 Domed copper blank. 38 mm (1.497”) dia., plain, with V-6 Flat copper blank. 35 SPS-16 $ 7.65 $ 5.90 $ 9.75 $ 8.10 Spun & Stamped Copper Pieces (0.040”; 18 gauge) A-14 Painting & Screening Medium. Water miscible. Excellent choice for painting. Pigments disperse easily, requiring less mixing. Water cleanup afterwards. $ 5.60/2 fl. oz. $ 27.75 pt. Note: Last measurement listed next to piece is its height or depth. Price is per piece. Trays SS-1 FF-81 FF-6 3-1/2” x 1/2” 3-1/4” x 2” x 3/8” AFF-578 4-3/4” x 3-5/8” FF-26 FF-35 5-7/8” x 3-1/8” x 1/2” 3-1/2” x 3” x 3/8” $7.05 FF-13 5-3/4” x 4-1/8” x 1” $11.00 4-1/4” x 3-5/8” x 3/8” $7.05 Switch and Outlet Plates $5.95 $11.35 Single Switch Double Switch Triple Switch Duplex Outlet $6.65 $8.55 $11.15 $6.65 Gift Certificates $5.95 Thompson offers gift certificates, perfect for that ʻhard to buy forʼ enamelist! Thompson Enamel gift certificates come in three denominations: FF-36 5-3/4” x 4” x 3/4” TEGC-25 - $ 25.00 certificate TEGC-50 - $ 50.00 certificate TEGC-100 - $100.00 certificate $8.25 34 Grinding & Screening Tools DM-22 Protective Dust Mask. 3M brand 8212 for dust and fumes. New air exit valve improves comfort and speaking ease. Always wear one when you are sifting powdered enamels. $9.15 ea. Sifters. Lightweight plastic sifters with 40 mesh screen for applying 80 mesh enamel. SM-1 Small (1/2” dia. x 1/2” d.) $3.30 ea. SM-2 Medium (1-1/4” dia. x 7/8” d.)$4.00 ea. SM-3 Large (2” dia. x 1” d.) $4.55 ea. $7.90 SW-1 SW-2 SW-3 SW-5 Blu-1 Blu-Stic. The ultimate adhesive for 3-D cloisonné. Holds cloisons on vertical surfaces. Can fire pieces upside-down if you like. Dip cloison into Blu-stic, position onto enamel surface, dry, fire in any position. $1.70/fl. oz. $2.65/2 fl. oz. Note: Additional .50 cent charge for different screen mesh size. Line Sifters. These specially made sifters can be used to sift a very fine line of enamel. They are available in two opening sizes. Only 80 mesh or smaller enamel particles should be used. LS-16 (1/16”) $15.10 ea. LS-32 (1/32”) $15.10 ea. Bolting Cloth. Fabric cloth with specific mesh opening. Fasten over bottle top with rubber band to make a shaker or in an embroidery hoop to make a screen. Sold per linear foot. SM-4 (60 mesh) $8.55 ft. SM-5 (80 mesh) $8.55 ft. SM-6 (100 mesh) $9.55 ft. SM-7 (150 mesh) $10.70 ft. Stackable Screens. For dust-free sizing of enamel. 5” dia. Mesh Each SM-540 40 $12.25 SM-560 60 $12.25 SM-580 80 $12.25 SM-5100 100 $12.25 SM-5150 150 $16.40 SM-5200 200 $16.40 SM-5325 325` $35.40 SM-5BP* Solid $ 2.10 *Use one as lid, another as catch pan. Stainless Steel Wire Screen. Mesh 6” x 6” Each 12” x 12” 60 SM-14 $ 5.05 SM-18 80 SM-15 $ 5.05 SM-19 100 SM-16 $ 5.95 SM-20 150 SM-22 $ 5.95 SM-24 200 SM-17 $10.00 SM-21 325 SM-23 $12.95 SM-25 Each $15.10 $15.10 $16.55 $16.55 $19.80 $24.70 Mortar and Pestle. Essential for grinding lump form to 80 mesh or finer. 4-1/2” I.D. MP-1 Mortar only $66.75 ea. MP-2 Pestle only $42.65 ea. Sprayers A-7 Preval Aerosol Spray Kit. Aerosol cartridge allows fine mist spraying of gum solutions. $7.00 ea. A-7R Replaceable Aerosol Cartridge for Preval Sprayer. $5.00 ea. Storage Containers & Petri Dishes Plastic Storage Containers. Three sizes of snap-lid stackable plastic storage containers. Packets contain 25 containers with lids. CONT-1 Small - holds 1/2 oz. enamel $2.30 pkg. CONT-2 Medium - holds 2 oz. enamel $4.25 pkg. CONT-3 Large - holds 8 oz. enamel $5.20 pkg. Petri Dishes. With lids CONT-4 (100mm x 15mm) Glass $7.25 ea. $83.10 doz. 15 CONT-5 (100mm x 20mm) Plastic $17.70 pkg. of 20 Burnishing and Stoning Materials B-18 Lea Compound. Grade C. Greaseless abrasive composition for satin finishing, burring, buffing and polishing. Use with a stitched muslin buff and buffing lathe. 1.9 lb. $7.55 B-1 Small Glass Brush. Rush fibreglass cleaning tool. An adjustable 1/8” dia. tip for burnishing small areas. $27.60/ea. Stencil & Transfer Material B-2 Refill Rod. Refill rod for B-1. $8.00 ea. CVS-1 Clear Vinyl Stencil Material. This stencil material can be used over and over without deterioration of the stencil. The clear vinyl is very flexible and pliable. Vinyl can be laid directly over drawing or photograph and lines traced right onto the vinyl with a permanent black marker. Stencil is then cut out with exacto knife or heat knife. Stencils can be washed after use and then used again and again. Works best on flat surfaces. $9.15/12” x 52” B-3 Standard Glass Brush. Rush fibreglass stick brush. Use on metal surfaces to burnish surface prior to enameling and after grinding to remove any grinding residue prior to re-firing work. Plastic covering can be cut down to expose brush as used. $50.10 ea. Bright Boy. Bright Boy rubber abrasive cleans copper ready to enamel with a few quick strokes. Excellent for finishing edges of bowls. B-4 (2-1/4” x 1-1/8” x 3/8”) $14.40 ea. A-9 Pellon Stencil Material. Pellon dressmakers fabric is ideal for cutting stencils. It can be washed and reused many times. $5.10 lr. yd. x 22.75” wide. Alundum Stones. These stones are specifically designed to grind glass. They leave no residue that would be injurious upon refire as carborundum would. (B-6 & B-7 are 6” x 1” x 1”; B-9 & B-10 are 8” x 1” x 1” ) B-6 150 grit for initial grinding. B-7 220 grit for final grinding. B-9 120 grit for initial grinding. B-10 240 grit for final grinding. CP-1 Carbon Paper. Perfect for transferring an image to your enamel work. Carbon Paper Tablet - 10 sheet, 8.5" x 11" $9.00 200 mesh, 74 micron 400 mesh, 40 micron 800 mesh, 20 micron 1800 mesh, 10 micron Best buy: all four strips $16.70 ea. $13.50 ea. $13.50 ea. $13.50 ea. $45.95 ea. Note: Last measurement listed next to piece is its height or depth. Price is per piece. Bowls LB-588 5-7/8” x 1” Low Bowl LB-29 2-3/4” x 5/8” Low Bowl $4.40 LB-368 3-11/16” x 9/16” Low Bowl $6.35 B-8 5-7/8” x 1-1/4” Bowl $12.60 Inlay Tools (Styles may vary) IT-1 Spatula $4.75 ea. IT-2 Scriber $3.40 ea. IT-3 Spreader $3.40 ea. Brushes For use with painting enamels and liquid metals. M-15B 1/4” shader for bands and areas. $5.20 ea. M-16B Fine point sable for thin lines. $3.90 ea. 16 Crow Quill Pen T-12 Crow Quill Pen $2.80 ea. T-13 Extra pen points $2.35 ea. B-53 9” x 2-1/2” Bowl Deep Bowls SCB-30 2-1/2” x 1” SCB-48 3-1/4” x 1-1/2” CD-60 4-3/8” x 1-1/2” CD-55 5” x 2-1/2” DB-61 6-3/4” x 4” $4.95 $7.05 $11.95 $13.85 $26.25 B-400 $21.05 7-3/4” x 1-1/2 Bowl DB-23 3-3/4” x 1-1/2” $9.30 Note: Lid for DB-23 is discontinued Lid (FC-22) for DB-23 (#FC-22). is Discontinued $11.95 Application Tools $14.10 ea. $14.10 ea. $14.50 ea. $14.50 ea. Diamond Cloth. (1” x 4” strips) Flexible Diamond Cloth Abrasive. For stoning or abrading enamel, glass, pottery glaze, bisque ware, stone, metal and a variety of other surfaces. Use wet or dry. For cloisonné, plique-à-jour, making a mat surface, removing blemishes such as brick dust, torn areas, runs, etc. Diamonds are micron graded to provide a consistent finish. Diamonds are bonded to a premium flexible backing material with a metal bond that securely anchors them in place. An open pattern produces aggressive cutting action and reduces loading. Supplied with adhesive back. If desired, can be bonded to a plastic or other type support. DC-1 DC-2 DC-3 DC-4 DC-5 Spun & Stamped Copper Pieces (0.040"; 18 gauge) CDC-52 Candy Dish & Cover Dish - 6-1/2” dia. x 1-3/4” Cover - 6-3/4” dia. x 3/4” Knob - 1-1/2” dia. x 1” $30.10 $28.90 Cup LB-24 LB-25 6-1/2” x 7/8” Low Bowl $14.15 CU-20 2-1/2” x 2-1/2” Cup Candle Holder 8” x 1” Low Bowl $12.60 $19.40 SB-91 7-1/2” x 15/16” Shallow Bowl $18.35 SB-54 11-1/8” x 1-5/8” Shallow Bowl $38.50 CH-65 5-1/4” x 1-1/4” Candle Holder $22.80 33 Firing Tools Spun & Stamped Copper Pieces (0.040”; 18 gauge) Note: Last measurement next to piece is either height or depth. Price is per piece. Coupe Shaped Plates CO-14 3-3/8” x 3/8” Coaster LT-1 4-1/2” x 1/2” Coaster TT-15 S-4 LS-3 RS-33 RS-34 RS-44 RS-45 RS-46 2-1/2” x 1/4” Saucer 4-1/2” x 1/2” Saucer 4-3/4” x 5/8” Saucer 7” x 3/4” Plate 7-3/4” x 3/4” Plate 8-5/8” x 11/16” Plate 9-3/4” x 13/16” Plate 10-7/8” x 1” Plate Oval Trays OB-59 3-3/8” x 3” x 3/4” OB-57 7-1/2” x 4-1/2” x 3/4” OB-12 8-1/2” x 6” x 3/4” OB-58 10-1/4” x 4-5/8” x 3/4” OB-16 10-7/8” x 7-1/4” x 1-1/8” Round Trays RP-102 6” x 1/2” D-17 7-3/4” x 1/2” RP-103 8-3/4” x 1/2” RP-115 15” x 5/8” Triangular Trays TD-40 5-5/8” x 5-5/8” x 5-5/8” x 3/4” $10.80 TD-49 7-3/4” x 5-3/4” x 4-3/4” x 3/4” $11.00 K-3 Heat Resistant Gloves. Kevlar nonasbestos heat resistant gloves. $37.15 pr. F-1 3” x 3” $2.85 ea. F-2 6” x 6” $8.55 ea. F-3 12” x 12” $32.80 ea. F-4* 4” x 4” $3.15 ea. * Fits TK-1 Furnace on page 21. K-4 Firing Fork (22” overall length) $17.25 ea. K-5 Scrolling Tools Pair of scrolling tools for hot plate fur nace. (overall length 12-1/2”) $7.85 pr. $4.60 $6.35 Square Trays LST-7 4-1/2” square x 5/8” ST-47 6-1/2” square x 3/8” ST-43 7-7/16” square x 1” ST-62 9-3/4” square x 1” $3.45 $6.35 $7.90 Rectangular Trays RT-38 4-5/8” x 3” x 1/4” TR-90 5-7/8” x 4-7/8” x 1/2” RT-39 9” x 5” x 5/8” $12.75 $15.40 $20.15 $26.10 $29.90 Round Corner Trays TR-98 3-3/8” square x 3/4” TR-66 4-1/2” square x 5/8” TR-67 6-1/2” square x 7/8” TR-99 5-11/16” x 2-7/8” x 5/8” $5.25 $11.35 $16.95 $13.85 $26.30 $10.10 $15.75 $20.15 $59.65 Firing Racks. Stainless Steel. Heat and corrosion resistant 4 mesh wire racks for transporting work in and out of the furnace. Supplied flat. Suggest using in conjunction with Firing Rack Support Bars in the firing chamber, and regular angle iron support bars on your table. $7.90 $11.95 $17.15 $27.65 $5.25 $9.60 $15.75 $7.20 $10.10 $15.75 $8.70 32 4-1/4” x 5/8” 5-3/4” x 1” 7-7/8” x 1-1/4” 9-7/8” x 1-1/4” Flat Bottomed DS-500 4-7/8” x 1” DS-650 6-1/2” x 1-1/4” K-6 Firing Fork Two hand grip. (36” overall length) $28.90 ea. F-5A F-5B F-6A F-6B F-7A F-7B K-8 Scrolling Tool. Heavy duty scrolling tool. (21” overall length) $12.50 ea. $7.90 $12.80 $20.00 $28.15 $8.70 $12.30 K-9 Heavy Duty Firing Fork. Elbow Rest Fork, or for two handed holding of heavy items. (36” overall length including 7” tine) $25.95 ea. K-10 Spatula. Stainless Steel Spatula for moving hot trivets. (9” length) $7.85 ea. Flat Flanged Flat Flanged Flat Flanged $2.30 ea. $3.55 ea. $2.75 ea. $3.90 ea. $7.75 ea. $8.95 ea. Planches. These planches are ideal for firing flat pieces. The numerous contact points minimize warpage when firing sizable flat pieces. Ceramic Crucibles. These high-fire ceramic crucibles are for use in making your own enamel threads of varying length, thickness and shapes. BN-46 BN-68 BN-810 4” x 6” 6” x 8” 8” x 10” $23.10 ea. $33.30 ea. $43.35 ea. Nichrome Wire. This wire produces very little oxide when heated, minimizing contamination in the firing chamber. The wire can be used in conjunction with other trivets or stilts to hold rings, or other 3-dimensional objects that are difficult to stilt. Sheet Mica. This natural mineral comes in sheet form of various sizes. Lump enamel can be fired onto mica to make small spheres of glass and mica can be used as a backing material for flat plique-à-jour work. MIC-1 3” x 5” $2.95 ea. MIC-2 4” x 4” $3.80 ea. MIC-3 6” x 6” $10.45 ea. 3” x 3” 3” x 3” 4” x 4” 4” x 4” 6” x 6” 6” x 6” Firing Rack Support Bars. These bars remain permanently in your furnace to support firing racks. A second pair can be placed on a cooling area when firing rack is removed from furnace. Pairs are required for use. FRB-4 (1” angle) 4” length $3.15 ea. FRB-6 (1” angle) 6” length $4.75 ea. SFRB-4 (3/4” angle) 4” length $2.55 ea. SFRB-6 (3/4” angle) 6” length $3.80 ea. CRV-1 (small) 3-1/8” high, 2-58” top dia. $5.90 ea. CRV-2 (large) 4-3/4” high, 3-1/4” top dia. $7.15 ea. Flared Bowls Coupe FB-93 FB-28 FB-41 FB-64 Lightweight Firing Racks. An 8 mesh, lighter wire rack for small work. Available both as a flat wire screen (A), or with two opposite sides bent 90 degrees, forming 1/2” flanges 17 NIW-1 NIW-2 18 ga. 20 ga. 0.048” 0.036” $1.00 ft. $1.10 ft. Trivets - Stilts Universal Trivet Arms. These stainless steel trivet arms can be easily fastened anywhere onto 4 mesh firing racks. (Order firing racks separately) TS-2 Pair of universal trivet arms. $5.95 pr. Grooved Trivets. Designed for group firing small pieces along the grooves or firing flat tile with even support and minimum sagging and warping. GT-1 (4-5/8” w. x 3/4” h. by 6” l.) GT-2 (5-3/16” w. x 1-1/2” h. x 6” l.) GT-1 GT-2 6” long, triple grooved 6” long, double grooved $5.50 ea. $6.70 ea. SCS-9 SCS-10 SCS-11 SCS-12 SCS-14 SCS-16 1/4” 3/4” 1” 1-1/2” 2-1/2” 3-1/2” Each $1.05 $1.10 $1.25 $1.40 $1.95 $2.30 Dozen $11.10 $12.10 $13.85 $14.85 $20.35 $22.75 Tripod for Torch Firing with Two Firing Racks. T-POD - Tripod for Torch Firing. 10” high, top 5” square - $35.30 ea. F-8V - “V” shaped Firing Rack for holding panels. 11.5 x 4 inch, 2 mesh - $3.50 ea. F-8A - Flat Firing Rack for holding trivets. 8 x 4 inch, 2 mesh - $2.10 ea. Three Point Trivets. See drawing below. Fitting Area* Height TPT-1 1-1/4” dia. 1-1/4” $2.85 ea. TPT-2 2” dia. 1-1/2” $3.50 ea. TPT-3 2-3/4” dia. 2-1/4” $4.65 ea. TPT-4 3-1/2” dia. 3-1/8” $4.90 ea. TPT-5 6” dia. 3” $6.80 ea. Four Point Trivets See drawing below. Fitting Area* Height FPT-1 1” x 3/4” 3/4” $2.40 ea. FPT-2 1-1/2” x 1-1/2” 1” $2.75 ea. FPT-3 2” x 2” 1-1/2” $3.50 ea. FPT-4 3” x 3” (Legs) 2-1/4” $7.05 ea. FPT-5 4” x 4” (Legs) 2-1/2” $9.40 ea. Four Point Trivets V-189 Teddy Bear 1-3/8” $ 1.50 / $16.20 V-192 Pig 1-9/16” $ 1.50 / $16.20 V-77 Horse Head 1-3/8” $1.50 / $16.20 GT-2 GT-1 Three Point Trivets Star Ceramic Stilts. Ceramic bases with metal points. Use like Metal Star Stilts. T-POD with F-8V rack on top. T-POD with F-8A rack and three point trivet * “Fitting Area” designates the largest size on top. 18 piece that fits a particular trivet. V-190 Elephant 1-1/2” $1.50 / $16.20 V-191 Donkey 1-1/4” $1.50 / $16.20 V-95 Dachshund 2-1/8” $1.50 / $16.20 V-96 Scottie 2-1/2” $1.50 / $16.20 V-136 French Poodle 1-3/8” $1.50 / $16.20 V-180 Bat 1-1/2” $1.50 / $16.20 V-186 Humming Bird 1-3/4” $ 1.50 / $16.20 31 V-88 Peace Dove 1-3/4” $1.50 / $16.20 V-103 Sea Gull 2-5/8” $1.50 / $16.20 V-184 Parrot 2-1/2” $1.50 / $16.20 V-67 Wild Duck 2” $1.50 / $16.20 V-185 Eagle 2-1/4” $ 1.50 / $16.20 V-62 Sea Horse 1-1/2” Tall $ 1.30 / $14.05 V-63 Sea Horse 2-1/2” Tall $1.50 / $16.20 V-76 Sea Horse 3” Tall $ 1.60 / $17.25 V-138 Dolphin 2-1/2” $1.50 / $16.20 V-133 Whale 3” $ 1.60 / $17.25 V-139 Butterfly 1-3/4” $ 1.50 / $16.20 V-66 Butterfly 2-1/8” $ 1.50 / $16.20 Adjustable Stainless Steel Trivets. Ideal for bowl and tray forms. Will adjust to many different sizes. Order bases and arm pairs separately. Saw Tooth Trivets. Ideal for firing multiple small shapes in the same firing. STT-1 will hold pieces 1” to 2” in diameter and STT-2 will hold pieces 3/4” to 1-1/4” in diameter. STT-1 (6” l. x 3/4” w. x 1-1/8” h.) $9.15 ea. STT-2 (6-3/8” l. x 9/16” w. 3/4” h.)$9.15 ea. STT-3 (10” l. x 2” w. 3/4” h.) $29.15 ea. AT-7 7” Base $17.00 ea. AT-9 9” Base $19.60 ea. AT-11 11” Base $22.25 ea. ATS ATL STT-1 STT-2 Adjustable Trivet. An investment that will last a lifetime. Minimizes warpage with proper support location. These adjustable trivets work with square, rectangular, round and free form shapes. Wings will bolt into place in any position on the grid. Wings are available in two sizes, STP-Wings have a steep pitch used for deep bowls; SHW-Wings have a shallow pitch, used for plate forms. Each can accommodate pieces as small as 4-1/2” square, to as large as 10-1/2” square. Deep Trivets With Legs Fitting Area* Height TPT-7 4-3/4” dia. 4-1/2” $8.70 ea. TPT-8 5-1/2” dia. 4-3/8” $10.20 ea. TPT-9 7” dia. 4-1/2” $11.30 ea. AJT-1 Base (7-7/8” w.x 10-3/4” l.) $30.15 ea. STP-Wing (Steep) (3-1/16” h.) $10.50 ea. SHW-Wing (Shallow) (7/8” h.) $10.50 ea. (Note: Three (3) wings needed for support) Large Four Point Trivets With Legs. Fitting Area* Height FPT-7 10” x 10” (Legs) 4” $23.10 ea. FPT-8 12” x 12” (Legs) 4” $26.20 ea. V-196 Butterfly Fish 1-5/8” $ 1.50 / $16.20 V-82 Starfish 1-3/8” $ 1.30 / $14.05 30 V-124 Butterfly 2” $1.50 / $16.20 Large Four Point Trivet LWT Trivet AJT-1 Lightweight Trivets With Legs. These light weight trivets do not require the use of a firing grid underneath. This reduces the amount of heat that would normally be absorbed by the grid when firing and also makes the overall load a little lighter when loading into the furnace. These trivets feature small legs which allow your spatula, trowel, or firing fork to fit underneath. V-140 Butterfly 3-5/8” $4.00 / $43.20 LWT-1 LWT-2 LWT-3 LWT-4 Fitting Area* Ht. 2” to 4” dia. 5” 5” to 7” dia. 5” 8” to 10” dia. 5” 11” to 13” dia. 5” Dia. 5-1/2” 7-1/2” 10” 12-1/2” Trivet arms 3” (pair) $10.10 Trivet arms 5” (pair) $10.85 Tri-Quad Stilt. Extremely adjustable stilt to support any shape on three or four points. Can be adjusted to fire pieces from 3” dia. to 8-3/4” dia. TQS-1 $23.95 ea. $ 9.15 ea. $11.80 ea. $14.40 ea. $18.45 ea. 19 Enameling Furnace Supplements Thompsonʼs Low Profile Hotplate Furnace Trivets. Especially designed for counter enameling with hotplate type furnaces. Set directly on element. K-1 Furnace Cement. A high temperature air setting cement powder. Mix with water for hard surface linings, cementing bricks together, or repairing furnaces. Add grog or crushed insulating brick to cement mix to patch or repair larger holes in furnace. $2.10/lb. HS-1 Base set of 4 spacers (smallest spacer holds up to 1” dia. piece up to largest spacer which holds up to 3” dia. piece) and a pair of HS-2 Trivet Arms HS-1 Set (spacers + arms) $14.75/set HS-2 Trivet arm (pair) $5.80 K-2 Porcelain Furnace Wash. Mix with water, apply with brush to protect furnace shelves and floor from enamel drippings. $1.70/lb. PH-3 Hot Pad/Furnace Floor Pad. A dual purpose, non-asbestos spun ceramic fiber pad. Use for setting hot pieces onto, or as furnace floor protection to catch spills and add longer life to your furnace floor. PH-3 9” x 9” x 1/8” square $5.85 ea. PH-4 13½”x13½”x1/8” square $13.10 ea. HS-3 Single piece trivet (2” l. x 1” w. x 5/8” h. - will hold up to a 2” dia. piece) $8.95 ea. PH-5 Marinite Board. Marinite is a high temperature insulating board which stands up to enameling temperatures and is used as a support during firing for flat pieces. It is easily cut with any saw or can be scored with a utility knife and broken apart. 1/2” thick. Tools for Metal Working Pliers. Extra fine quality thin pliers. Smooth jaws, polished heads, plastic grips. 4-3/4” total length. 3P470 Flat Nose $14.15 ea. 3P472 Round Nose $14.15 ea. 3” square 6” square 12” square 3P471 Chain Nose $14.15 ea. Blockout - Resist Media Asphaltum Varnish V-137 Turtle 1-7/8” $ 1.50 / $16.20 V-59 Heart (15/16” x 1-1/16”) $ 1.00 / $10.80 V-132 Star 1-1/8” $ 1.00 / $10.80 V-105 Star 7/8” $ 1.00 / $10.80 Used as an acid resist when etching metal in the champlevé technique. 3P614 End Cutter $14.15 ea. V-57 Maple Leaf 1-7/8” $ 1.50 / $16.20 V-92 Penguin 1-3/4” $ 1.50 / $16.20 V-86 Fig Leaf 1-3/4” x 2-1/4” $1.60 / $17.25 C-5 $13.80/pt. PnP - Blue Transfer Film A revolutionary new blockout material for etching metal. Anything that can be photo-copied can be etched into metal. 8-1/2” x 11” C-7 3P615 Diagonal Cutter $14.15 ea. Jewelers Saw Frame T-8 $18.75 ea. T-9 2/0 grade saw blades T-10 3/0 grade saw blades $3.00/doz. $30.70/gross Soldering Tweezers. 6-1/2” long, self locking grip. T-4 $4.50 ea. $1.90 ea. $7.60 ea. $30.15 ea. V-183 Bell 1” $ 1.50 / $16.20 20 5 sheets 10 sheets 50 sheets $16.55 $26.20 $98.50 V-74 Star 1” $ 1.00 / $10.80 V-127 Boutonniere 11/16” $ 1.00 / $10.80 V-181 Oak Leaf 2-1/2” $ 1.50 / $16.20 V-182 Holly Leaf 2-5/8” $ 1.50 / $16.20 29 Enameling Furnaces Stamped Copper Pieces (0.040”; 18 gauge) Pieces are shown 1/2 Actual Size unless indicated otherwise. Sold by the piece and dozen quantities. All sizes approximate. TK-1 Electric furnace $244.15 ea. V-79 Round Drop 9/16” $ .90 / $9.70 V-45 Teardrop 7/8” x 1” $ 1.00 / $10.80 V-94 Pendant 1-3/8” x 2” $ 1.50 / $16.20 V-73 Cross 1-1/2” x 2” $1.30 / $14.05 V-51 Rd. Square 27/32” $ 1.30 / $14.05 *V-48 Triangle 1-1/2” $ 1.30 / $14.05 (Slightly Domed) V-112 Pendant 1-3/4” $ 1.50 / $16.20 Thompson Hotplate Furnace. A small hotplate furnace. For beginners, students and hobbyists. Great for small trinkets. 900 Watts 6 Amp Element 47/8” dia. HP-4 Electric furnace $160.80 ea. HP-5 Replacement element $28.90 ea. Thompson Electric. A small low cost electric chamber furnace, 120 volts, A.C. 1000 watts. (Does not have a temperature control.) Interior chamber size: 5” w. x 7” d. x 4” h. Weight: 30 lbs. V-175 Pendant 1-5/16” x 2” $ 3.15 / $34.00 Note: HP-1 Furnace has been discontinued. HP-2 replacement element for HP-1, $28.90 HP-3 replacement lid for HP-1, $28.90 Model TK-1 TK-2 Replacement element $19.65 ea. TK-3 Replacement door & rod $32.75 ea. Dual Temperature Enameling Furnace. Holds 1450°F for copper, or 1000°F for aluminum by inserting or removing the insulation plug. Element is connected to bottom of lid. Lid removes for inserting larger items. Excellent for china painted plates. 110 volts A.C., 720 Watts, 6 Amps. Chamber size: 9” dia. x 2” h. Weight: 5 lbs. DT-1 Electric furnace $190.60 ea. DT-3 Collar (2” tall) $39.35 ea. DT-2 Replacement element $23.65 ea. DT-4 Split door for use with DT-3 $22.90 ea. Paragon Furnaces . Thompson Enamel stocks and ships two popular Paragon furnaces. Improved! The Infinite Control Switch has been moved and an analog pyrometer has been added. Both are located in the base of the furnace. These improvements are on the E-9AX and the E-14ALT models (below). V-52 Pendant 1-3/4” x 2-1/2” $3.15 / $34.00 Model E9-AX is a great furnace for the beginning to experienced enamelist. For those who are serious about their enamel work, this furnace will last for many years. The Infinite Control Switch cycles on and off through a bi-metallic timer. The higher the switch setting, the longer the heating elements stay on during each Model E9-AX cycle. When the switch is turned to High, the elements stay on continuously. This furnace comes with a built in analog pyrometer to read the temperature in the firing chamber. Requires 1 element. Model E-14ALT is Paragonʼs premium enameling furnace for those who want to work on larger pieces. Perfect for classroom or workshop environments. The Infinite Control Switch cycles on and off through a bi-metallic timer. The higher the switch setting, the longer the heating elements stay on during each cycle. When the switch is turned to High, the elements stay on continuously. This furnace comes with a built in analog pyrometer to read the temperature in the firing chamber. Requires 2 elements. Model E-14ALT E-14ALT Interior dimensions: 13” w. x 131/2” d. x 8-3/4” h. (.88 cubic ft.) Exterior dimensions: 18-1/4” w. x 22-1/2” d. x 20-1/2” h. Volt: 240 Amp: 13 Approx. shipping weight: 131 lbs. Variable Temperature Control - 2000°F Max. Temp. Shipped in wooden crate. Note: E-14ALT can only be shipped by trucking company. *E9-AX Interior dimensions: 8-1/2” w. x 9” d. x 4-1/2” h. (.19 cubic ft.) Exterior dimensions: 14” w. x 18” d. x 16-1/2” h. Volt: 120 Amp: 9.2 KW: 1.1 Approx. Shipping Weight: 60 lbs. Variable Temperature Control - 2000°F Max. Temp. V-177 Pendant 1-5/16 x 2” $ 1.50 / $16.20 28 Model HP-4 V-110 Pendant 1-3/8” x 2-1/2” $ 1.50 / $16.20 E9-AX Electric furnace $615.00 ea. E9-AX-2 Replacement element $39.00 ea. *For an additional $50.00, you can get either Paragon furnace in; black - turquoise - hot pink or purple. They will however have to be special ordered. 21 E-14ALT Electric Furnace $1020.00 ea. E-14ALT-2 Replacement Elements $43.00 ea. (Requires two elements) Pyrometers Model TC-3 Digital Controlling Pyrometer. Hi-Tech solution for carefree firing. Plug furnace into receptacle on pyrometer box, then plug pyrometer into wall outlet. Insert thermocouple into firing chamber. Turn knob to desired temperature. Digital readout shows furnace temperature. This controller provides accurate temperature control with easy-to-see digital temperature readout, all at an economical price. Size: 6-1/2” x 6-1/2” x 4”. Specify: TC-3A for 120 Volts, 15 Amps or TC-3B for 240 Volts, 20 Amps. Model TC-3 $295.40 ea. TC-3T Replacement Thermocouple - $40.50 Paragon Portable Pyrometer. The pyrometer is used to measure the temperature inside the furnace firing chamber. The pyrometer features a needle readout. Knowing the temperature when firing can be of utmost importance for many enameling techniques. PYRP Paragon portable pyrometer set for Paragon furnace $155.00 ea. PYRPT Replacement ther mocouple $56.00 ea. Hand Held Digital Pyrometer A Hand-held digital pyrometer that will take a temperature reading in your kiln. Small enough to fit in a shirt pocket, this 5 oz. pyrometer measures degrees up to 1999 F. It has a Type-K thermocouple with an easy plug-in connection, so it can be replaced in seconds. Powered by a 9-volt battery (included), it has an on-off switch, liquid crystal display, protective case, and even comes with its own stand. (Thermocouple not intended to remain in kiln for extended periods of time). HHP-1 HHP-IT Hand Held Pyrometer ea. Replacement Thermocouple ea. $ 82.00 $ 24.00 Beginnerʼs Enameling Kit This kit is ideal for those who are learning how to enamel. The kit has been put together with all the necessary items to introduce enameling to the classroom or to establish a camp craft program. The kit is also an ideal way to start your own workshop, without a large investment. The kit contains all the basic equipment and materials, including instruction, all at a bargain price! The kit includes: • Enameling Furnace (see prices below) • HS-1 & HS-2 Trivet for Hotplate Furnace (included with BEK-1 only) • HS-3 Trivet (included in BEK-2 and BEK-3 only) • K-10 Spatula for removing trivet from furnace • PH-2 Hot Pad (6-5/8” x 6-5/8”) • SM-3 2” Sifter for applying enamel • 2 oz. Thompsonʼs Holding Agent • (6) V-14B 1-1/2” copper squares • (6) V-6 1-1/2” dia. copper circles • (6) V-34 1-7/16” copper ovals BEK-1 (Comes with HP-4 Furnace) $254.20 ea. BEK-2 (Comes with DT-1 Furnace) $263.35 ea. BEK-3 (Comes with TK-1 Furnace) $321.00 ea. *K-3 Gloves recommended with the BEK-2 & BEK-3 *K-4 Firing Fork recommended with the BEK-3 • (8) 2 oz. quantities of opaque enamel colors* which include: 1175 Moca Brown, 1237 Butter Yellow, 1360 Jungle Green, 1410 Robinʼs Egg Turquoise, 1620 Daphne Blue, 1720 Mauve Purple, 1880 Flame Red, 1996 Black. • 8 oz. ALV-1 Assorted transparent and opaque lump enamel • 1 oz. OTV-8 Seven color mix enamel threads • Beginnerʼs Enameling Course by Woodrow Carpenter • Copper Enameling by Gerry Coleman, Marguerite Koenig, and Edna Berry (Gilding Metal - Continued from previous page) Round Cornered Shapes (Flat Sheet 0.040”; 18 ga.) Rectangles GHL-40 9-5/8” x 15” GHL-41 5-1/8” x 10-7/8” $23.00 ea. $8.30 ea. 4-1/2” 6-1/8” 8-1/4” $4.75 ea. $5.05 ea. $9.70 ea. Squares GHL-42 GHL-43 GHL-44 SPS-6 - $15.00 ea. 1-1/2” Square SPS-12 - $20.00 ea. 1” x 2-3/4” Rectangle Silver Plated Steel Jewelry grade pieces with fine textured surfaces. Ideal for transparent enamels. All pieces are slightly domed. SPS-1 - $4.10 ea. 13mm Circle SPS-3 - $5.70 ea. 22mm Circle SPS-4 - $11.00 ea. 34mm Circle SPS-5 - $13.55 ea. 1-1/4” Square SPS-15 - $5.50 ea. 18 x 13mm Oval 22 SPS-16 - $6.45 ea. 25 x 18mm Domed Oval SPS-20 - $5.55 ea. 12 x 11mm Sm. Heart SPS-26 - $5.40 ea. 20 x 12mm Small Cross with hole SPS-152 SPS-90 SPS-54 SPS-46 *(We reserve the right to substitute similar colors depending on the availability of stock.) BEK-1X (Without Furnace) BEK-2X (Without Furnace) BEK-3X (Without Furnace) SPS-10 - $5.65 ea. 32 x 6mm Rectangle $105.65 ea. $84.75 ea. $84.75 ea. 27 SPS-25 - $6.60 ea. 24 x 16mm Cross 1-13/16” x 2-1/2” Rec. 3” x 3-7/8” Rec. 2-7/8” Circle 2” Square $19.95 ea. $35.10 ea. $26.85 ea. $26.65 ea. Enameled Iron Tiles (18 ga.) Rectangles Ground Coat & White Cover Coat - Back side coated with ground coat, front side coated with ground coat and white cover coat, ready for painting or other techniques. Circles CET-3 CET-4 CET-6 CET-8 CET-10 Squares SET-3 SET-4 SET-6 SET-8 SET-10 Rectangles RET-34 RET-45 RET-46 RET-57 RET-58 RET-810 3” 4” 6” 8” 10” $3.65 ea. $5.20 ea. $7.25 ea. $9.75 ea. $12.70 ea. 3” 4” 6” 8” 10” $3.65 ea. $5.20 ea. $7.25 ea. $9.75 ea. $12.70 ea. 3” x 4” 4” x 5” 4” x 6” 5” x 7” 5” x 8” 8” x 10” $4.40 ea. $5.70 ea. $5.95 ea. $8.20 ea. $9.10 ea. $11.30 ea. ESP-34 ESP-45 ESP-46 ESP-57 ESP-58 ESP-810 Gilding Metal (0.040”) Circles GMC-3 GMC-4 GMC-5 GMC-6 GMC-8 GMC-10 GMC-12 Squares 3” 4” 6” 8” 10” 12” $2.05 ea. $2.45 ea. $3.15 ea. $4.15 ea. $8.05 ea. $12.20 ea. $17.75 ea. 3” $1.85 ea. GMS-5 5” $3.85 ea. GMS-6 GMS-8 GMS-10 4” 6” 8” $2.25 ea. $4.90 ea. $8.30 ea. 10” $13.25 ea. GMR-16 1” x 6” $1.20 ea. GMR-45 4” x 5” $3.20 ea. GMS-12 Rectangles GMR-34 GMR-46 $1.80 ea. $2.60 ea. $3.65 ea. $4.95 ea. $6.30 ea. $8.20 ea. 3” 4” 5” 6” 8” 10” 12” GMS-3 GMS-4 Thin steel (0.015”, 28 ga.) with ground coat and white on face side, ground coat only on back side. About 60% thinner than our Enameled Iron Tiles (18 ga.) Coat the back side with Scalex (page 14) and fire flat on a wire mesh. Use standard contact adhesive to bond finished piece to plywood or other backing. ESP-3 ESP-4 ESP-6 ESP-8 ESP-10 ESP-12 $2.10 ea. $2.80 ea. $2.95 ea. $4.15 ea. $4.60 ea. $5.65 ea. 95% Copper, 5% Zinc. Excellent for transparent enamels. Used by most commercial badge makers. Enameled Steel Plates (28 ga.) Squares 3” x 4” 4” x 5” 4” x 6” 5” x 7” 5” x 8” 8” x 10” GMR-69 GMR-810 GMR-912 12” 3” x 4” 4” x 6” 6” x 9” 8” x 10” 9” x 12” $19.10 ea. $2.15 ea. $4.05 ea. $6.95 ea. $10.80 ea. $13.90 ea. (Gilding Metal - continued on next page) 26 Bead Making Supplies Enamels for Copper Core Bead Making. See our 1000 and 2000 series enamels for copper, silver, gold and steel listed on pages 4 & 5. Jewel Effect Lumps and Opaque Enamel Threads found on page 8 can also be used for bead making on copper tubing. 80 mesh transparent clear (i.e. 2030) is generally used to start the bead. 6/20 mesh enamel from any of the 1000 & 2000 series are then used to build up the bead mass. Please Note: Bead stringing accessories are located on page 38 and the booklet Enamel Bead Making is located on page 39, video on page 42. Copper Tubing. BC-1 1/16” inside dia. $1.05ft. BC-2 1/8” inside dia. $1.15 ft. Bead Making Holders. Our new bead making holder has been improved in two ways (1) the base of the holder remains cool while making beads and (2) two different sizes of interchangeable tapered points allow the bead to be easily removed from the holder when finished. The small point (TP-1) fits 1/8” dia. tubing and the large point (TP-3) fits 3/16” tubing. Inexpensive Bead Holder. HR-1 for BC-1 Tubing $1.45 ea. HR-2 for BC-2 Tubing $1.45 ea. Copper Tubing Cutting Holder. BTH-1 Bead Tubing Holder. A heavy duty steel jig which holds two sizes of copper tubing. Makes cutting copper with a jewelerʼs saw exact and easy. $26.20 ea. BMH (Bead making holder without tip) $13.80 ea. TP-1 Small tip 1/8” dia. $5.00 ea. fits BC-1 TP-3 Large tip 3/16” dia. $5.00 ea. fits BC-2 New Bead Rack Copper Beads (Seamless) Heat and corrosion resistant stainless steel 4 mesh wire rack. 3-1/4” x 5-1/2” x 2-1/8” high, Holds two 2-1/2” beads or several small beads. Four stainless steel support wires included. Make beautiful enameled beads using the cloisonné technique or other techniques. RCB-3 RCB-2 RCB-1 BR-2 OCB-1 RCB-1 (sphere) - 7/8” (.875”) dia. $1.35 ea. $14.70 doz. RCB-2 (sphere) 3/4” (.750) dia. $1.15 ea. $12.50 doz. RCB-3 (sphere) 5/8” (.625) dia. $ .95 ea. $9.70 doz. OCB-1 (oval) - .794” x 1.223” $1.75 ea. $18.00 doz. 23 Bead Rack $26.20 ea. Copper Flat Sheet Copper (0.040”) Thompson sells “oxygen free, high conductivity, electrolytic” copper, conforming to ASTM specifications B-170. This type of copper is the most suitable for enameling. Circles FC-3 FC-4 FC-5 FC-6 FC-7 FC-8 FC-9 FC-10 FC-12 FC-15 FC-18 FC-20 Stamped Copper Pieces (0.040”; 18 ga.) Sold Only In Each and Dozen Quantities See special settings, page 37. Squares V-11 1/2” V-12 3/4” V-13 7/8” V-14 1” V-14A 1-1/8” V-14B 1-1/2” V-15 2” Rectangles V-21 1/2” x 1-3/4” V-22 3/4” x 1” V-23 1” x 1-1/2” V-24 3/4” x 2” Circles V-1 1/2” V-2 3/4” V-3 7/8” V-4 1” V-5 1-1/4” V-6 1-1/2” V-7 2” Ovals V-32 3/4” x 1-3/16” V-33 1” x 1-7/16” V-34 1-7/16” x 2” V-35 9/16” x 1-3/4” V-36 13 x 18mm V-37* 13 x 18mm V-39* 18 x 25mm V-40 22 x 30mm V-20* 30 x 40mm V-30 30 x 40mm V-29* 7/8” x 1-1/8” *Domed /ea. $ .90 $1.00 $1.00 $1.30 $1.30 $1.50 $2.50 Price $1.00 $1.00 $1.00 $1.00 $ .90 $1.00 $1.00 $1.00 $1.30 $1.30 $1.80 $1.00 $1.00 $1.50 $1.00 $1.00 $1.00 $1.00 $1.00 $1.50 $1.50 $1.00 /doz. $9.70 $10.80 $10.80 $14.05 $14.05 $16.20 $27.00 Squares FS-3 FS-4 FS-5 FS-6 FS-7 FS-8 FS-10 FS-12 FS-15 FS-18 FS-20 $10.80 $10.80 $10.80 $10.80 Rectangles FR-16 FR-34 FR-45 FR-46 FR-57 FR-58 FR-69 FR-810 FR-912 FR-1216 FR-1218 FR-1220 $9.70 $10.80 $10.80 $10.80 $14.05 $14.05 $19.45 $10.80 $10.80 $16.20 $10.80 $10.80 $10.80 $10.80 $10.80 $16.20 $16.20 $10.80 3” 4” 5” 6” 7” 8” 9” 10” 12” 15” 18” 20” 3” 4” 5” 6” 7” 8” 10” 12” 15” 18” 20” 1” x 6” 3” x 4” 4” x 5” 4” x 6” 5” x 7” 5” x 8” 6” x 9” 8” x 10” 9” x 12” 12” x 16” 12” x 18” 12” x 20” Round Cornered Shapes (Flat Sheet 0.040”) 24 $4.40 $5.40 $9.05 $12.50 $17.05 $19.50 $24.20 $28.65 $41.15 $50.65 $96.55 $119.05 $3.85 $4.55 $7.80 $10.80 $14.70 $16.75 $25.50 $35.25 $43.45 $83.15 $102.30 $1.80 $3.95 $5.70 $6.55 $9.50 $11.95 $14.75 $19.30 $24.50 $46.65 $50.40 $57.90 Rectangles HL-40 9-5/8” x 15” HL-41 5-1/8” x 10-7/8” $34.75 $15.55 4-1/2” 6-1/8” 8-1/4” $8.70 $9.65 $18.25 Squares HL-42 HL-43 HL-44 Enameling Iron, Aka Low Carbon Steel Enameling Iron (aka Low Carbon Steel) is also valued for itʼs minimal warpage during firing. Hairline cracks in painting enamel are eliminated when working on steel. Thompsonʼs 2008 transparent clear works well as a cover coat over painting enamels used on 18 gauge pre-enameled iron tiles. Pre-coated Enameling Iron tiles or panels are excellent for outdoor signage, yard decoration, wall plaques and hot food trivets. Pre-coated Enameling Iron is available with ground coat only where you apply the cover coat (GCET, GSET & GRET Series 18 ga.), or also available with pre-enameled ground coat and white cover coat, ready to use without any preparation (CET, SET, & RET Series - 18 ga.). We also have available Enameled Steel Plates (ground coat & white cover coat) (ESP Series - 28 ga.), thin and lightweight, at an inexpensive price - again excellent for all our painting enamel products. 0.02 to 0.04% carbon Requires a ground coat GC-16 (see pg. 8) (18 ga. for plaques-22 ga. for hammering) Please indicate gauge when ordering. Circles EIC-3 3” EIC-8 8” EIC-4 $.75 ea. 4” $1.05 ea. EIC-10 10” $4.80 ea. EIC-18 18” $13.10 ea. 4” $1.10 ea. EIS-10 10” $5.60 ea. EIS-18 18” EIC-6 EIC-12 EIC-15 Squares EIS-3 EIS-4 EIS-6 EIS-8 EIS-12 EIS-15 Rectangles EIR-26 EIR-34 EIR-46 EIR-58 EIR-610 EIR-912 EIR-1216 EIR-1218 6” 12” 15” 3” 6” 8” 12” 15” 2” x 6” 3” x 4” $2.00 ea. $3.15 ea. $7.20 ea. $9.70 ea. $.70 ea. $7.85 ea. $15.95 ea. $.95 ea. $.95 ea. 9” x 12” $6.05 ea. 12” x 16” 12” x 18” Circles $11.55 ea. $1.55 ea. 5” x 8” Ground Coat Only. Tiles are coated only with ground coat. You save money by applying white or other color cover coat. $3.90 ea. 4” x 6” 6” x 10” Enameled Iron Tiles (18 ga.) $2.40 ea. GCET-3 GCET-4 GCET-6 GCET-8 GCET-10 3” 4” 6” 8” 10” $3.25 ea. $3.90 ea. $5.60 ea. $7.45 ea. $11.10 ea. GSET-3 GSET-4 3” 4” $3.15 ea. $4.25 ea. 3” x 4” 4” x 5” 4” x 6” 5” x 7” 5” x 8” 8” x 10” $3.80 ea. $4.80 ea. $5.00 ea. $6.55 ea. $7.20 ea. $9.10 ea. Squares $2.65 ea. $3.75 ea. GSET-6 $10.05 ea. GSET-8 GSET-10 $11.50 ea. Pre-coated Enameling Iron Rectangles GRET-34 GRET-45 GRET-46 GRET-57 GRET-58 GRET-810 Pre-coated enameling iron (aka low carbon steel) is excellent for all Thompsonʼs Painting products, including Overglaze Painting Colors, Painting Enamel Kit, Acrylic Enamels, Watercolor Enamels, Liquid Form Enamel Colors and the Enamel Marking Crayons. 25 6” 8” 10” $5.80 ea. $7.70 ea. $9.90 ea. (Continued on next page)
