Catalog - RSM Distribution

Transcription

Catalog
RSM Distribution was established as a home based “Cottage Industry” in December 1989 in order to provide a source for
those hard to find control line products that were disappearing quickly from the local hobby shop shelves. The initial
emphasis in the early years was on items such as line clips, fuel tanks, control line engines, flying lines and similar
hardware.
By 1992 it became apparent that quality control line kits were simply unavailable. Most manufacturers were eliminating
the C/L kits, concentrating on one or two simple profiles or a selection of 1/2A basic starter kits and the balance of their
production going to R/C kits. A control line flyer who wished to build anything other than a Ringmaster, Shoestring or
one of the few kits produced by SIG was forced to obtain a set of plans and scratch build. For this reason RSM
Distribution decided to get involved in kit design and manufacturing. This decision required that the company cease being
a home-based “Cottage Industry” and concentrate full time on control line supply. An industrial unit was rented and the
company moved from the owner’s garage to a warehouse/manufacturing location.
The popularity of the VSC showed that many control line flyers enjoyed the Old Time and Classic designs, which many
of us grew up with. It was decided that RSM’s primary concentration would be in this class of kits using only “contest”
weight balsa. In this way the company could provide kits that were lightweight and capable of contest level performance.
In 2001 we invested in a laser cutter. Although the machine was very expensive it offered extreme accuracy and the
ability to make very intricate cut patterns. The result was to allow RSM to produce the finest control line kit in the
marketplace. We started with the Warburton Tony and Tucker Special in 1992 and as of July 2013 we produce over 55
kits. We plan to continue to add more kits each year.
Control line kit production automatically lead the company into producing its own line of high quality control hardware
such as wire flap & elevator horns, wing tip weight boxes, flap/elevator “Lucky Boxes”, adjustable lead out guides,
carbon fiber bellcranks, stainless steel control lines, line wrapping kits, eyelets and sleeves. RSM Distribution has
responded to the increased popularity of electric power by providing electric flight components as well as complete Sport
Level and Competition Level electric power systems.
Our company policy is to continually seek out new products that can be used by the control line flyer, stock those
products or have them manufactured if they are not available and continue to add new control line kits. RSM Distribution
promises that it will always deliver products ordered as quickly as possible.
We promise that if a product is not available at the time you order it we will tell you that it is out of stock and also that we
will tell you when we expect to receive new stock. We will never cash your check or charge your credit card until the
product is actually shipped. In addition to these promises RSM Distribution guarantees if you are not completely
satisfied with any product you purchase we will either replace the product or refund your money in full. This is the
way we have done business in the past and it is the only way we will ever do business in the future.
RSM DISTRIBUTION
21899 Heliotrope Ln
Wildomar, CA 92595
Ph: (951) 678-1406
http://www.rsmdistribution.com -- Rsm1rule@rsmdistribution.com
2013 – Revised 11/13/2013
RSM Distribution Catalog
Page 1
RSM CONTROL LINE KITS
RSM Controline Products kits use only the lightest, hand selected, Contest Balsa.
All parts are machine-cut and sanded.
RSM Controline Products guarantees complete satisfaction for all our kits or your money back.
Full kits include:
 full-size rolled-up, plans
 complete hardware package features all contestgrade components including:
o steel control horns
o quality bellcrank
o arrowshaft pushrod,
o adjustable leadout guide
o wing-tip weight boxes
o appropriate landing and tailwheel gear
o our famous "Lucky Boxes" for flaps and
elevators
Short kits include:
 100% laser cut parts
 set of plans
o The builder provides:
 Hardware
 Covering
 sheet and stick balsa
 landing gear
Newest Kits
Blue Max Eternal
by Kaz Minato – Japanese World Team member
DQ Master
Page 6
Page 8
Ringmaster (take apart)
Old Time Stunt Legal
Page 21
2013 – Revised 11/13/2013
Page 2
Page
5
5
5
5
6
6
6
6
7
7
7
7
8
8
8
8
9
9
9
9
10
10
10
10
11
11
11
11
12
12
12
12
13
13
13
13
13
14
14
14
14
15
15
15
15
16
16
16
16
2013 – Revised 11/13/2013
RSM Full Built-Up Kits
Kit Name
Engine
Span
Sq. In.
‘57 Nobler
.35-.40
50.5
530
Adams’ Special
.25-.35
48.5
470
Belfry Bound
.46-.60
56-1/4
720
Big Job
.59-.61
54
572
Blue Bird
.25-.35
42 5/8
374
Blue Max Eternal
.61-.76
60
679
Buccaneer Mark II
.35-.46
52
536
Chipmunk
.34-.40
51
532
Chizler
.35-.40
51
540
Continental
.46
55
572
Cougar
.35-.40
54
559
Crusader
.35-.45
53
570
Derringer 46
.46-.60
56
670
DQ Master
.46-.61
55.5
612
Dragon
.35-.40
50
460
Electra
.35-.40
54
610
F-4
.35-.40
50.5
525
Feno
.25-.30
44
388
Fierce Arrow
.40-.46
54
917
Focke Wulf TA152
.46
56
597
Fury
.40-.46
55.5
577
Gladiator
.35-.46
58 / 67 660 / 735
Grey Ghost
.35-.40
54
527
Hawker Hunter
.46-.61
58 7/8
660
Humbug
.25-.40
58
500
Humongous
.35-.40
54
630
Hurricane
.35-.40
50
570
Jamison Special
.35-.40
50
507
L. A. Heat
Two .35's
65
834
L. A. Warmth
Two .15’s
48.75
463
Madman
.35-.40
49
411
ME-109
.35
52.5
557
Miss Kell
.35-.40
54.5
557
Mosquito
Two .35-.40’s
58
579
Neptune II
.35-.40
50
536
Oriental Plus – Full Kit
.40 Tuned Pipe
56
605
Oriental Plus – Short Kit
.40 Tuned Pipe
56
605
P-40K Tiger
.40-.46
56
560
P-51D Mustang
.46-.60
56
610
Pathfinder LE
.51 - .65
57
650
Pentastar
.46-.61
58 / 61 654 / 693
Pole Dancer
.40-.46
55 3/8
570
Ruffy
.35-.40
50
545
Shark 35
.35-.40
52
554
Shark 45
.45-.61
58 7/8
686
Shoestring Stunter
.46-.60
58
660
Skylark
.35-.60
Space Hound
.35-.40
56
626
Starduster 40
.40-.46
56.5
635
Part #
GBOX
ADAM
BELFULL
BIGJ
BBIRD
BMAX
BUCK
DILLCHIP
CHIZ
CONTIN
COUG
CRUS
DERR
DQM
DRAG
ELEC
F-4
FENO
FARROW
TA152
FURY
GLAD
GHOST
HAWK
HUMB
HUMG
HURK
JAMI
HEAT
WARM
MAD
ME109
KELL
MOSS
NEP
OPLUS
OPSHORT
P40K
P51D
PATH
PENT
POLE
RUFF
SHARK35
SHAR
SHOE
SKY
HOUND
STAR
Page 3
Page
17
17
17
17
18
18
18
18
19
19
19
19
19
Kit Name
Engine
Span
Stuka Stunter
.25-.29
47.25
Stunt King
.25-.35
44
Super Ringmaster
.25 - .35
42
Tempest
.35-.40
54
The Lark
.35-.40
52
Thunder Gazer
.61-.76
60.75
Thunderbird II
.35-.45
56
Thundercloud
.61-.76
60
Trivial Pursuit – Full Kit
Piped .60
60
Trivial Pursuit – Short Kit
Piped .60
60
Tucker Special
.35-.45
53
Venus
.35-.40
50
Warburton Tony
.35-.60
56
Page
20
20
20
20
21
21
21
21
Page
22
22
22
22
2013 – Revised 11/13/2013
Sq. In.
479
436
381
610
570
630
570
665
660
660
560
520
560
RSM Profile Kits
Kit Name
Engine Span Sq. In.
Mark 1
.35
42
462
Miss Sarah
.35
43
380
Naughty Girl
.40-.46 50.25
553
P40 Tiger
.35 - .40
46
490
P51 -15
.15
36
291
P51D Electric
Electric
36
291
Ringmaster
.25-.35
42
381
RSM 1/2 A Kits
Kit Name
Engine
Span Sq. In.
Hunter Stunter
.049-.061
35
225
MissAshlee
.049 Reed Valve 24
125
Pinto
.049-.061
34
220
Sky Sport
.049-.061
30
180
Part #
STUKA
SKING
SRING
TEMP
LARK
TG
TBRD
CLOUD
TRIV
TRIVS
TUCK
VNUS
TONY
Part #
MARK1
MISSS
NGIRL
P40P
P51-15
P15E
RING
Part #
HUNT
MISSA
PINT
SKYS
Page 4
‘57 Nobler
1957 “Green Box” Version
Classic Stunter
 Engine: .35 - .40
 Span: 50.5”
 Area: 550 sq. in.
 Length 38.5”
 Laser Cut Ribs and Fuselage Formers
 Winner 12 Nats, 2 Worlds
RSM Price $ 139.95
Part # GBOX
Adams’ Special
Old Time Legal 1950 Design
 Engine: .25 - .35
 Span: 48.5”
 Length: 30.25”
 100% Laser Cut
RSM Price $ 139.95
Part # ADAM
Belfrey Bound
Old Time Stunt Legal by Dale Kirn
 Engine: .46 - .60
 Span: 56.25”
 Length: 35”
 100% Laser Cut
RSM Price $189.95
Part # BELFULL
2013 – Revised 11/13/2013
Big Job
OTS Legal By Addie Naccarato
 Engine .59 - .61
 Span: 54”
 Area 572 sq. in.
 Length 32.5”
 100% Laser cut
RSM Price $ 179.95
Part # BIGJ
Page 5
Blue Bird
Classic Legal by Charles A. Mackey
Blue Max Eternal
 Engine: .61 - .76
 Span: 60”
 Length: 45”
 Laser Cut
RSM Price $ 189.95
Part # BMAX
 Engine: .25 - .35
 Span: 42.6”
 Length: 26.5”
 100% Laser Cut
RSM Price $ 139.95
Part # BBIRD
Buccaneer Mark II
By Allen Brickhaus
Chipmunk
Classic Legal by Joe Dill
 Engine: .35 - .46
 Span: 52”
 Length: 38”
 100% Laser Cut
 Accurate Rib Cutouts for Jig Construction
RSM Price $ 149.95
Part # BUCK
2013 – Revised 11/13/2013
 Engine: .35 - .40
 Span: 51”
 Length: 38”
 100% Laser Cut
RSM Price $ 149.95
Part # DILLCHIP
Page 6
Chizler
Classic Legal by Dick Mathis
 Engine: .35 - .40
 Span: 51”
 Length: 39-1/4”
 100% Laser Cut
RSM Price $ 159.95
Part # CHIZ
Continental
Classic legal by Tom Warden
 Engine .46
 span 55”
 Length 39.5”
 Includes a wing jig
 100% laser cut
RSM Price $ 159.95
Part # CONTIN
Cougar
Classic Legal By KENHI
 Engine .35 - .40
 span 54 “
 Area 559 sq. in
 Length 36.5 “
 100% Laser cut
RSM Price $ 149.95
Part # COUG
2013 – Revised 11/13/2013
Crusader
Classic Legal Warbird by Charles A. Mackey
 Engine: .35 - .45
 Span: 53”
 Length: 41.75”
 Tricycle Landing Gear
 Sleek Styling
RSM Price $ 144.95
Part # CRUS
Page 7
Derringer 46
1st Place 1978 NATS & the Walker Cup
by Bob Whitely!
 Engine: .46-.60
 Span: 56”
 Length: 43-1/2”
 Full Canopy
 Formed Landing Gear
RSM Price $ 179.95
Part # DERR
DQ Master
 Engine: .46-.61
 Span: 55.5”
 Length: 41.8”
 Laser Cut
RSM Price $ 144.95
Part # DQM
Dragon
Old Time Stunt Legal J.C. Yates
 Engine .35-.40
 Span: 50”
 Length: 31”
 Laser Cut Kit
1st in OTS – Ignition at the
Vintage Stunt Championships 2002!
RSM Price $ 139.95
Part # DRAG
2013 – Revised 11/13/2013
Electra
Precision Stunter by Dick Williams
Top 10 1963 NATS!
 Engine: .35 - .40
 Span: 54”
 Length: 38”
 Classic Legal
RSM Price $ 144.95
Part # ELEC
Page 8
F-4
By Bill Suarez
 Engine: .35 - .40
 Span: 50 1/2"
 Rib Cut Outs for Jig
 Laser Cut
 Features 6 degree Anhedral Stab
RSM Price $ 169.95
Part # F-4
Feno
1955 Classic Design by Ted Goyet
 Engine: .25 - .30
 Span: 44”
 Length: 29.5”
 100% Laser Cut
RSM Price $ 139.95
Part # FENO
Fierce Arrow
Classic Legal 1957 Design
By Wild Bill Netzeband
 Engine: .40 - .46
 Span: 54”
 Length: 32”
 Weight: 44 oz.
 100% Laser Cut
RSM Price $ 149.95
Part # FARROW
2013 – Revised 11/13/2013
Focke Wulf TA152
By Keith Trostle
 Engine .46
 span 56 “
 Length 38.5”
 Classic Legal
 100% Laser cut
RSM Price $ 179.95
Part # TA152
Page 9
Fury
By Lou Wolgast
Gladiator
Classic Legal by Dennis Shauer
 Engine .40 - .46
 span 55.5”
 Length 38”
 Classic Legal
 Laser cut
 Engine: .35 - .46
 Two versions included in one kit
 .35 Version
 .46 Version
 Span: 58”
 Span: 67"
 Stab/Elevator: 25"
 Stab/Elevator: 29"
 100% Laser Cut
 Accurate Rib Cut Outs for Jig Construction
RSM Price $ 149.95
Part # FURY
RSM Price $ 159.95
Part # GLAD
Grey Ghost
Larry Scarinzi’s Classic Stunter
Hawker Hunter
Bob Whitely’s 1969 Classic
 Engine: .35 - .40
 Span: 54”
 Length: 31.5”
 100% Laser Cut
 Formed Wire Gear
RSM Price $ 149.95
Part # GHOST
2013 – Revised 11/13/2013
 Engine: .46 - .61
 Span 58 7/8”
 Area 660 Sq. In.
 Length 47.5”
 100% Laser Cut Parts
RSM Price $ 189.95
Part # HAWK
Page 10
Humbug
Classic Legal – By “Wild Bill” Netzeband
 Engine: .25 - .40
 Span: 58”
 Length: 29.5”
 Weight: 44 oz.
 100% Laser Cut
RSM Price $ 139.95
Part # HUMB
Hurricane
Semi-Scale Warbird by Jack Sheeks
 Engine: .40 - .46
 Span: 50”
 Length: 39-1/2”
 Warbird favorite!
Humongous
Old Time Stunt Legal by Ted Snow
 Engine: .35 - .40
 Span: 54”
 Length: 32-3/4”
 Designed by Ted Snow in Sept. 1949
RSM Price $ 139.95
Part # HUMG
Jamison Special
Old Time Stunt Legal by Bud Jamison
Flown at the 1947 NATS!
 Engine: .35 - .40
 Span: 50”
 Length: 32”
RSM Price $ 144.95
Part # HURK
2013 – Revised 11/13/2013
1st, 2nd & 3rd in OTS at the 2000 NATS!
RSM Price $ 139.95
Part # JAMI
Page 11
L.A. Heat
Twin Engine Stunt by Bob Whitely
Top 10 1987 NATS!
 Engine: Two .35’s
 Span: 65”
 Length: 53”
RSM Price $ 199.95
Part # HEAT
L. A. Warmth
Pat King’s Twin Stunter
Inspired by Bob Whitely’s L.A. Heat
 Engine: Two .15’s
 Span: 48.75”
 Length: 41.25”
 100% Laser Cut
RSM Price $ 149.95
Part # WARM
Madman
Old Time Stunt by J.C. Yates
 Engine: .35 - .40
 Span: 49”
 Length: 31.25”
 100% Laser Cut
RSM Price $ 139.95
Part # MAD
ME-109
By Charles A. Mackey
 Engine: .35
 Span: 52.5”
 Length: 34”
 Classic Legal
 Published September, 1958 in American Modeler
 100% Laser Cut
RSM Price $139.95
Part # ME109
2013 – Revised 11/13/2013
Page 12
Miss Kell
By Bob Whitely
Mosquito
Semi-Scale Twin by Jack Sheeks
 Engine: .35 - .40
 Span: 54.5”
 Length: 37”
 100% Laser Cut
RSM Price $ 149.95
Part # KELL
 Engine: Two .35 -.40’s
 Span: 58”
 Length: 37.75”
 100% Laser Cut
RSM Price $199.95
Part # MOSS
Neptune II
By Jim Ebejer
 Engine .35 - .40
 Span 50”
 Length 35.75 “
 Classic Legal “I BEAM”
 Laser cut
RSM Price $ 169.95
Part # NEP
2013 – Revised 11/13/2013
Oriental Plus
Dee Rice’s New Tuned Pipe Stunter
 Engine: .40 Tuned Pipe
 Span: 56”
 100% Laser Cut
 Accurate rib cut outs for jig construction
 Classic “Oriental” styling
RSM Full Kit Price $189.95 - Part # OPLUS
RSM Short Kit Price $149.95
Part # OPSHORT
Page 13
P-40K Tiger
Modern Stunter by Pat Johnston
RSM’s WARBIRD SERIES!
 Engine: .40 - .46
 Span: 53.25”
 Length: 39.5”
RSM Price $ 159.95
Part # P40K
P-51D Mustang
SEMI-SCALE FULL STUNT!
 Engine: .46 - .60
 Span: 56”
 Length: 39”
 Designed by Pat Johnston & Eric Rule
 Semi-Scale Precision Stunter
RSM Price $ 159.95
Part # P51D
Pathfinder LE
Precision Aerobatic Stunter
by Gordan Delaney
 Engine: .51 - .65
 Span: 57”
 Length: 49”
 100% Laser Cut
RSM Price $ 189.95
Part # PATH
2013 – Revised 11/13/2013
Pentastar
By Lou Wolgast
 Engine: .46 or .61
 Two versions included in one kit
 .46 version
 .61 version
 Span: 58”
 Span: 61"
 Carbon Fibre Bell Crank
 Laser Cut Parts
RSM Price $ 189.95
Part # PENT
Page 14
Pole Dancer
By John Ashford
 Engine: .40 - .46
 Span: 55 3/8"
 Length: 43"
 Laser Cut Parts
RSM Price $ 149.95
Part # POLE
Shark 35
By Lew MacFarland
 Engine .35 - .40
 Span 52”
 Length 40 “
 Classic Legal
 Laser cut
RSM Price $ 144.95
Part # SHARK35
2013 – Revised 11/13/2013
Ruffy
Classic Stunt Legal by Lew McFarland
 Engine .35 - .40
 Span: 50”
 Length: 34.25”
 Laser Cut Kit
RSM Price $ 139.95
Part # RUFF
Shark 45
by Lew McFarland
AUTHENTICATED NATS CHAMP!
 Engine: .45 - .61
 Span: 58 7/8”
 Length: 41.75”
 Tricycle Gear
 Classic Legal
RSM Price $ 169.95
Part # SHAR
Page 15
Shoestring Stunter
Modern Stunter by Bob Whitely
 Engine: .46 - .60
 Span: 58”
 Laser Cut Ribs and Fuselage Formers
RSM Price $ 199.95
Part # SHOE
Skylark
Competitive Precision Stunter
3 Versions in one kit!
 Engine: .35 - .60
 Builds as either “35”, “46” or “60” version
 Classic Legal (46 & 35 versions)
 46 version flown in 1958
 35 version kitted in 1962
 Span: (46 version) 56.5”
 Area: (46 version) 614 sq. in.
 Length: (all versions) 39.75”
 Full-size plans signed by Ed Southwick
 Laser Cut Ribs
RSM Price $ 179.95
Part # SKY
Space Hound
By Juri Sirotkin
 Engine .35 - .40
 Span 56 “
 Length 39.5”
 Classic Legal
 Laser cut
Starduster 40
By Ed Capitanelli
 Engine .40 - .46
 Span 56.5”
 Length 41”
 Modern Stunt
RSM Price $ 159.95
Part # STAR
RSM Price $ 149.95
Part # HOUND
2013 – Revised 11/13/2013
Page 16
Stuka Stunter
Designed in 1951 by Don Still
 Engines .25 - .29
 Span 47.25”
 Length 33.25”
 Old Time Legal
RSM Price $ 139.95
Part # STUKA
Super Ringmaster
 Engine .25 - .35
 Span 42”
 Length 24.5”
 Classic Legal
 Laser cut
Stunt King
Published in 1950 by Bill Winter
 Engine: .25 - .35
 Span: 44”
 Length: 29.5”
 100% Laser Cut
RSM Price $134.95
Part # SKING
Tempest
Classic Legal Stunter by Bart Klapinski
1st Place 1967 NATS!
 Engine: .35 - .40
 Span: 54”
 Length: 39”
 Classic Legal
RSM Price $ 139.95
Part # TEMP
RSM Price $ 134.95
Part # SRING
2013 – Revised 11/13/2013
Page 17
The Lark
Classic Legal by Charles A. Mackey
Authenticated CLASSIC LEGAL!
Thunder Gazer
By David Fitzgerald
 Engine: .35 - .40
 Span: 52”
 Length: 39.75”
 Popular Kit!
RSM Price $ 144.95
Part # LARK
 Engine: .61 - .76
 Span 60.75"
 10.5" Nose Moment
 18.5" Tail Moment
 24.75" Stabilizer Span
 4" Carbon Fibre Bell Crank
 Laser Cut Parts
 Rib Cut Outs for Jig Construction
RSM Price $ 224.95
Part # TG
Thunderbird II
Classic Legal 1959 Version Stunter by Bob Palmer
 Engine: .35 - .45
 Span: 56”
 Length: 39”
 Autographed Full-Size Plans
 Aluminum Landing Gear
RSM Price $ 139.95
Part # TBRD
2013 – Revised 11/13/2013
Thunder Cloud
By John Ashford
 Engine: .61 - .76
 Span: 60"
 Length: 46.5"
 Laser Cut Parts
RSM Price $ 189.95
Part # CLOUD
Page 18
Trivial Pursuit
Precision Aerobatic Stunter
by Ted Fancher
 Engine: Piped .60
 Span: 60”
 Length: 48”
 100% Laser Cut
RSM Full Kit Price $199.95
Part # TRIV
RSM Short Kit Price $159.95
Part # TRIVS
Tucker Special
Classic Legal Precision Stunter
NATS CONTEST WINNER!
 Engine: .35 - .45
 Span: 53”
 Length: 35”
RSM Price $ 144.95
Part # TUCK
Venus
OTS Legal by Jim Ebejer
 Engine: .35 - .40
 Span: 50”
 Length: 38.8”
 100% Laser Cut
 OTS Legal
RSM Price $ 149.95
Part # VNUS
2013 – Revised 11/13/2013
Warburton Tony
Classic Legal Warbird Stunter
 Engine: .35 - .60
 Span: 56”
 Length: 37”
 Classic Legal as seen in the 3/63 American Modeler
mag
1ST PLACE ‘63 BRITISH NATS!
RSM Price $ 139.95
Part # TONY
Page 19
RSM Profile Kits
Mark 1
Profile Stunter for Beginners by Eric Rule
 Engine: .35
 Span: 42”
 Profile Fuselage
 Adjustable Tank Mount
RSM Price $ 89.95
Part # MARK1
Miss Sarah
Profile Sport/Stunt - “COSMIC WIND”
 Engine: .19 - .35
 Span: 43”
 Profile Fuselage
 Quick to build!
 Classic Legal
RSM Price $ 79.95
Part # MISSS
Naughty Girl
By John Ashford
 Engine: .40 - .46
 Span: 50.25"
 Length: 42 7/8"
 Laser Cut Parts
RSM Price $ 119.95
Part # NGIRL
2013 – Revised 11/13/2013
P-40 Tiger
Competitive Profile Stunter
RSM’s WARBIRD SERIES!
 Engine: .35 - .40
 Span: 46”
 Length: 36”
 1/2” Profile Fuselage
 Ply Doublers
RSM Price $ 99.95
Part # P40P
Page 20
P-51 Mustang
Ron Burn’s Profile Mustang
Electric P-51D Mustang
Electric Flight Without the
High Price or Problems
 Engines .15 - .20
 Span 36”
 Length 25.75”
RSM Price $79.95
Part # P51-15
 Engine: electric
 Span 36"
 Length 25-3/4"
Package includes kit + motor, speed controller,
Timer/sequencer, battery & prop. All programming is
complete. Just "plug & play"
RSM Price $179.95
Part # P51E
Ringmaster
 Engine .19 - .35
 Span: 42”
 Length: 24.25”
 Laser Cut Kit
 Engine .19 - .35
 Span: 42”
 Length: 24.25”
 Laser Cut Kit
RSM Price $ 89.95
Part # TARING
RSM Price $ 79.95
Part # RING
2013 – Revised 11/13/2013
Page 21
RSM 1/2 A C/L Kits
Hunter Stunter
Precision 1/2A Stunter Designed by Eric Rule
 Engine: .049 - .061
 Span 35”
 Length 21”
 100% Laser Cut
 Flies the complete stunt pattern
RSM Price $ 74.95
Part # HUNT
Miss Ashlee
Sport and Stunt for 1/2 A Power
.049-.051 FUN!
 Engine: .049 Reed Valve
 Span: 24”
 Length: 16-3/4”
 Fun Flyer!
RSM Price $ 44.95
Part # MISSA
Pinto
Large Precision Stunter for 1/2A Power
by Dee Rice
FLYS COMPLETE PATTERN
 Engine: .049 - .061
 Span: 34”
 Length: 21”
 Laser Cut Kit
RSM Price $ 74.95
Part # PINT
Sky Sport
By Larry Renger
 Engine .049 - .061
 Span 30”
 Length 21”
 Modern Stunt Profile
 Balloon Tank included
 1” Main Wheels included
 Tail Wheel Skid included
 Laser cut
RSM Price $ 79.95
Part # SKYS
2013 – Revised 11/13/2013
Page 22
RSM Combo Deals with Engine and Plane Kit
Mark 1 Profile
Electric P-51D Mustang
Electric Flight Without the
High Price or Problems
Mark 1 Profile with Stock Fox 35,
Includes Tank, Wheels, glue, Handle,
Lines, Clips
Regular price: 273.58
Combo price: 219.95
Part # COM1
Package includes kit + motor, speed controller,
Timer/sequencer, battery & prop. All programming is
complete. Just "plug & play"
RSM Price $179.95
Part # P51E
With electric power package
The venerable RINGMASTER can be taken apart for
easy transportation. Electric Powered, it can be
carried on a commercial aircraft.
The only “Flip the switch and fly” system on the
market. Power package which includes prop, motor,
speed controller, KR Governor & Battery is fully
bench tested and comes ready to install.
RSM Price $249.99
Part # TARINGPKG
2013 – Revised 11/13/2013
Page 23
Electric Control Line
General Description
Electric Control Line (ECL) is simply a new and different way to power our models. Years ago when modelers
switched from ignition to glow engines they did so because glow engines offered significant advantages.
Electric motors now offer similar advantages to the modern modeler.
Benefits
Anyone who has flown precision aerobatics knows that a consistent engine run is essential to top performance.
When your engine fails to give you a perfect run you find yourself wasting valuable practice time. When this
happens at a contest you are forced to take an “attempt” or you end up with a terrible score.
The major advantage of electric power is that your motor run is exactly the same flight after flight. No more
wasted flights due to a bad engine run equals more quality practice time! No more bad scores due to poor needle
settings! No more need to change the needle setting between your first and second flight!
A couple of additional benefits to electric control line are:
1) The C/G does not change during the flight as there is no fuel being drawn out of the nose of the model.
2) No hot exhaust so no requirement to fuel proof the model makes for a lighter model (improved
horsepower to weight ratio).
3) No need to wipe down the model after each flight so no more worry about fuel soaking.
4) The engine sound is all but eliminated which allows you to fly in areas you could never do so in the past.
This opens up all kinds of parks for our use.
Electric powered models have been used successfully in stunt at both the national and international level. This
quiet revolution has all but taken over in R/C pattern at the top level. Prices of batteries, motors, and ESC’s
(Electronic Speed Controllers) are now at the level where it costs around the same as flying glow engines. The
battery technology has already been improved to allow for over 200 good flights from around the 50 or 60 of a
few years ago. It is now cheaper to fly electric than glow.
For more information on Electric Control Line please visit our website at
www.rsmdistribution.com
2013 – Revised 11/13/2013
Page 24
Competition Level Brushless Motors
Description
Hacker A30-10XL
Compare to .46 glow power.
Includes backmount, prop adapter and all screws.
3.5mm gold bullet connectors are provided
Hacker A30-8 XL Motor.
Compare to .35-.40 Glow Power.
3.5mm gold bullet connectors are provided
A20-26M Hacker Motor.
Compare to .061 Glow Power.
Included are 2 prop adapters, plywood and aluminum motor mounts,
screws and 2 spare shafts. The motor uses a standard 3mm output
shaft.
Hacker A20-12XL
Includes mounting hardware and 2 spare shafts.
Please note - A20-XL Motors do not include backmount parts
Hacker A30-12M V2
Compare to .25 Glow Power
3.5mm gold bullet connectors are provided.
Hacker A50-12S
2013 – Revised 11/13/2013
Peak Watts: 700
kV(RPM/V):900
Weight:6.30 oz
Shaft Diameter: 5.00mm
Operating Current: 30A
Peak Current:42A
Peak Watts: 700
kV(RPM/V):1100
Weight:6.30 oz
Peak Current:45A
Peak Watts: 150
kV(RPM/V):1130
Weight:1.48 oz
Peak Current:15A
Peak Watts: 300
kV(RPM/V):1000
Weight:2.95 oz
Peak Current:35A
Peak Watts: 400
kV(RPM/V):1370
Weight:4.00 oz
Peak Current:35A
Peak Watts: 1700
kV(RPM/V):492
Weight:12.32 oz
Peak Current:70A
Part #
Price
A30
79.99
A30-8XL
79.99
A20-26M
47.99
HACKER
A20-1
57.99
HACKER
A30-1
59.99
HACKER
A50-1
129.99
Page 25
Sport Level Brushless Motor
Description
L2210 Brushless Motor - 1230 KV.
Bell style motor.
Part #
Kv: 1230 rpm/v
Voltage:7.4~11.1v (2~3s)
Max Current: 14A
L2210-1230
Max Power: 150W
Shaft Size : 3mm
Weight: 50g
KDA 22-20L Brushless Motor - 1050 KV.
Kv (rpm/v) 1050
Weight (g) 85
KDA A22-20L
Max Current (A) 25
Power(W) 250
KDA A36-12M Brushless Motor - 1370 KV. Kv (rpm/v) 1370
Weight (g) 116
A36-12M
Max Current (A) 35
Power(W) 380
KDA A36-8XL Brushless Motor - 1000 KV. Kv (rpm/v) 1000
Weight (g) 190
KDA A36-8XL
Max Current (A) 45
Power(W) 550
KDA A36-10XL Brushless Motor - 900 KV. Kv (rpm/v) 900
Weight (g) 190
KAD A36-10XL
Max Current (A) 42
Power(W) 785
KDA K50-12S Brushless Motor.
Kv (rpm/v) 620
Weight (g) 285
KDA A50-12S
Max Current (A) 55
Price
29.99
39.99
49.99
59.99
59.99
89.99
Speed Controllers
Description
50 Amp Hacker X55 Pro Speed Controller
With Heli Governor Mode
70 Amp Hacker X70 Pro Speed Controller
With Heli Governor Mode
20 Amp ESC with BEC. Comes with all connectors soldered on. Perfect
for use with KR Governor for C/L flight.
Weight: 18g
Size: 28x2x8mm
Constant Current: 20A
Max. Current: 30A (for 10 seconds)
Input: 2-4s Li-Po ; 5-12s Ni-XX
BEC: Max. 2A@5V
ESC by ZTW 30 AMP with BEC. Comes with all connectors soldered
on. Use with KR Governor for C/L flight.
Weight: 28g with cable
Size: 40x28x8mm
BEC: Max. 3A@5V
2013 – Revised 11/13/2013
Part #
Price
ESP
89.99
X70SB
95.99
20A ESC
19.99
30A ESC
39.99
Page 26
Speed Controllers
Description
ESC 50 Amp by ZTW with SBEC. Comes with all connectors soldered
on. Use with KR Governor for C/L flight.
Weight: 45g with cable
Size: 58x31x11mm
BEC: Max. 4A@5.5V Switching DC-DC
70 Amp ESC by ZTW with BEC
For use with the KR Governor Timer
Part #
Price
50A ESC
49.99
ZTW70
69.99
Batteries
Description
Battery 3300 mAh 4 cell 14.8 Volt by Thunder Power complete with balancer plug and Deans
Connector
Battery 3300 MaH LiPo 4 Cell 14.8V 25C by Longre Power with Deans Connector and Balance
Plug. Perfect for the RSM .46 System.
Battery 3300 MaH 3 Cell 25C LiPo by Longre Power complete with Deans Connector and
Balance Plug. Perfect for the RSM 35-40 System.
Battery 2200 mAh 3 cell 11.1 volt 25C LiPo by Longre Power complete with balancer plug and
Deans Connector. Perfect for the RSM 15 System.
Battery 3 Cell 1300 mAh 30C. Weight 3.75 oz. Perfect for RSM .061 System
Part #
Price
TP3300
99.99
LP3300-4S
69.99
LP3300-3S
49.99
LP2200
29.99
AM13003S
24.99
Propellers For Electrics
Description
APC 9X6 Electric Prop Standard Pitch
APC 9X6 Electric Prop Reverse Pitch (Pusher)
APC 10X7 Electric Prop Perfect for the RSM 35-40 System
APC 12-6 Electric Prop Reverse Pitch
APC style 11 x 5.5 Electric Prop Pusher - Reverse Pitch -Perfect for the
RSM .35-.40 Electric System
APC Style 14 x 7 Electric Pusher Prop Reverse Pitch - Perfect for RSM
.65-74 System
APC Style 7X5 Electric Pusher Prop Reverse Pitch - Perfect for the
RSM .061 Electric Power System
APC Style 8X4 Electric Pusher Prop Reverse Pitch
APC Style 12 X 5.5 Wide Electric Pusher Prop Reverse Pitch - Perfect
for RSM .46 Electric System
2013 – Revised 11/13/2013
Part #
APC9E
APC9X6
APC10X7E
APC12EP
Price
3.50
3.50
3.95
5.95
APC1155
4.75
APC1470EP
11.99
APC7X5EP
3.50
APC84EP
3.54
ASPC1255WEP
6.99
Page 27
Timer/Sequencers
Description
KR Governor ver.1.2. Controls RPM, Flight Time and Start delay.
Allows use of lower priced ESC to reduce cost. Gives flight
performance similar to high priced tuned pipe system. Instant stop in
event of prop jam protects your system from burn out. For use with
Version 1.0 Program Stick.
KR Governor ver.2, with Horizontal Pins & On/Off Switch. Controls
RPM, Flight Time and Start delay. Allows use of lower priced ESC to
reduce cost. Gives flight performance similar to high priced tuned pipe
system. Instant stop in event of prop jam protects your system from
burn out.
Most customers use this configuration for built-up fuselages.
KR Governor ver.2, with Vertical Pins & On/Off Switch. Controls
RPM, Flight Time and Start delay. Allows use of lower priced ESC to
reduce cost. Gives flight performance similar to high priced tuned pipe
system. Instant stop in event of prop jam protects your system from
burn out.
Most customers use this configuration for profile fuselages.
KR governor ver .2 with Retracts. The governor will allow you to equip
your model with retractable landing gear. Computer chip controls entire
flight plus the retracts. You will require a switch with this product.
Please add KR Switch.
KR Governor Activator Switch. For use in turning the ECL system on
and off.
KR Governor Programmer Unit. For use with the KR Governor Ver.1
or Ver.1.2. Set Flight Time, RPM, Start Delay Time plus Power
Increase during Maneuvers. Simple to use at the flying field.
KR Governor Program Stick Ver.2. Sets Flight Time, RPM, Start Delay
and Power Increase. For use with the KR Governor ver.2. Complete
with easy to read instruction manual. Simple to use at home or at the
flying field.
KR Governor Ver .2 with Switch & Programmer
HUBIN FM8-A (RSM) Simple RPM and Time adjustments
Pre Set for 9100 RPM, Soft Start Flight timed for 6 min 20 sec
Soft Stop Push Button extends through fuselage
KR Governor Activator Switch. For use in turning the ECL system on
and off. Great for Profile Models
KR Governor designed for use with Profile Models. Pins are curved to
take up less space. Start Button instead of a Switch
2013 – Revised 11/13/2013
Part #
Price
KR1
35.00
KR GOV-H
42.50
KR GOV-V
42.50
KR GOV-R
39.99
KRSWITCH
5.00
KRPROG
15.00
KRPROG2
15.00
KRPKG
49.50
TMR1
30.00
KRBUTTON
5.00
KRGOV-P
47.50
Page 28
ESC Program Cards
Description
ESC Program Card for KDA (Saker) ESC.
Although our ESC's are fully programmed for C/L flight when we ship
them you may wish to change the settings.
This programming card works with all of the models of KDA (Saker)
Speed Controllers that we carry.
It provides a quick easy way to set all of the speed controller
programming options at the same time.
Part #
Price
To use this programming card you simply set the jumper pins to the
desired ESC parameter values and then plug the card into the control
lead on your ESC and attach a motor to the output leads of the speed
controller. When you power up the controller with the motor battery,
the ESC will download and store the new values into it's internal
memory. After you hear one short beep from the motor, the program is
loaded and you can unplug the motor battery from the speed controller.
Now you can remove the program card and plug the control lead back
into the KR Governor
ESC Program Card for ZTW ESC.
Although our ESC's are fully programmed for C/L flight when we ship
them you may wish to change the settings.
This programming card works with all of the models of ZTW Speed
Controllers that we carry.
It provides a quick easy way to set all of the speed controller
programming options at the same time.
KDACARD
9.99
To use this programming card you simply set the jumper pins to the
desired ESC parameter values and then plug the card into the control
lead on your ESC and attach a motor to the output leads of the speed
controller. When you power up the controller with the motor battery,
the ESC will download and store the new values into it's internal
memory. After you hear one short beep from the motor, the program is
loaded and you can unplug the motor battery from the speed controller.
Now you can remove the program card and plug the control lead back
into the KR Governor.
ZTWCARD
9.99
2013 – Revised 11/13/2013
Page 29
Battery Chargers/Misc.
Description
Thunder Power TP6-10C
Input Power: 11-16V DC 10Amp at maximum charge rate
Memory for each Battery type
Charge battery type: LiPoly/NiMH/NiCd/Pb/A123 Charge voltage and cells:
LiPoly battery: 1 - 6 cells CC to CV change voltage: 4.1 V/cell
Full Charge Voltage 4.2 V/Cell
NiMh, NiCd Battery: 1 - 14 cells, Pb(SLA) battery: 6V/12V/24V ,A123
Battery: 1 - 6 cells
Imax B6 AC Dual Power Charger
AC 100~240v or 12V DC input
Microprocessor controlled
Individual cell balancing
Charges Li-ion, LiPo, LiFe, Ni-Cd, NiMH, and PB batteries
Input voltage monitoring. (Protects car batteries at the field)
Data storage (Store up to 5 packs in memory)
Battery break in and cycling
Ni-MH/NiCd cells: 1~15
Li-ion/Poly cells: 1~6
Pb battery voltage: 2~20v
Hacker USB Interface programmer for Windows
Deans Connector Male (2)
Deans Connector Female (2)
Safe Charging Bag for your Lipo Battery
Protect your family and home from the hazard of lipo charging.
This lipo-guard is a fireproof bag, designed to stop and contain the fire caused
by incorrectly or poorly functioning lipos, especially during charging.
We urge all customers to always practice extreme caution when charging and
never leave a charging battery unattended.
This pack is the small size. It is 18x22cm. It will fit three 2200mah 3S1P packs
comfortably.
The LP-Guard is made from a fibreglass woven fabric. Similar to fireproof suits
worn by some firefighters
Battery Checker
Battery Capacity Controllor. LED readout of capacity in Li-Po battery at a
glance. Also checks balance of each cell. Small and compact it fits in your field
box.
2013 – Revised 11/13/2013
Part #
Price
TP610C
119.95
IMB6AC
74.99
LINK
WSD1302
WSD1303
14.99
3.59
2.69
CHGBAG
7.99
BATTCHECK
24.95
Page 30
Electric Control Line Systems
Complete systems from RSM Distribution are flight tested. They come with all connectors installed. Flight parameters are
fully programmed. Just mount, flip the switch and fly. No set up or computer is required to operate.
Competition Level
Description
RSM 061 Electric Power System
Equal to .061 Glow Power.
Hacker A20-34S motor, 12 AMP ESC, KR Governor, 910 mAh 3S 25C Battery & 6x5.5
prop. Comes with all programming installed.
Hacker A20-12XL motor, 30 AMP ESC, KR Governor, 2200 mAh 3S 25C Battery & 9x6
Pusher prop. Comes with all programming installed.
Hacker A30-12M motor, 50 AMP ESC, KR Governor, 3300 mAh 3S 25C Battery & 10x7
Equal to .35 - .40 Glow Power
Hacker A30-8XL motor, 50 AMP ESC, KR Governor, 3300 mAh 3S 25C Battery & 11x5.5
Equal to .46 Glow Power
Hacker A30-10XL motor, 70 AMP ESC, KR Governor, 3300 mAh 4S 25C Battery & 12x6
RSM 61-74 Electric Power System
Hacker A50-12S motor, 70 AMP ESC, KR Governor, 3900 mAh 6S 25C Battery & 14x7
2013 – Revised 11/13/2013
Part #
Price
RSM061SYSC
169.99
RSM15SYSC
220.99
RSM25SYSC
224.99
RSM35SYSC
274.99
RSM46SYSC
329.99
RSM6174SYSC 424.99
Page 31
Sport Level
Description
Includes KDA A20-26M Motor, 20 Amp Speed Controller, KR Timer/Sequencer, 1300 mAh 3
cell Battery & 8 x 5 Prop. Comes with all programming installed.
Includes KDA A22-20L Motor, 30 Amp Speed Controller, KR Timer/Sequencer, 2200 mAh 3
cell Battery & 9 x 6 PusherProp. Comes with all programming installed.
KDA A30-12M Motor, 40 AMP ESC, KR Governor, 3300 MaH 3 cell Lipo Battery, 10 x 7
Pusher Prop. Fully Programmed Ready to Fly
KDA A30-8XL Motor, 45 AMP ESC, KR Governor, 3300 MaH 3 cell Lipo Battery, 11 x 5.5
Pusher Prop. Fully Programmed Ready to Fly
Equal to .46 Glow Power
Includes KDA A30-10XL Motor, 45 Amp Speed Controller, Timer/Sequencer, 3300 mAh 4
cell 25C Battery & Prop. Comes with all programming installed.
RSM 61-74 Electric Power System
Includes KDA-K5012S-620 Motor, 70 Amp Speed Controller, Timer/Sequencer, 4000 mAh 6
cell 35C Battery & 14x7 Prop. Comes with all programming installed.
Part #
Price
RSM061SYS
139.99
RSM15SYS
139.99
RSM25SYS
184.99
RSM35SYS
186.99
RSM46SYS
244.99
RSM6174SYS 314.99
Electric Packages
Description
Electric Powered P51-D Profile.
Profile Aerobatic Stunter powered by RSM 15
Electric System.
Equal to .15 glow power.
Package includes Kit, Electric Motor, Speed
Controller, KR Governor, Switch & Battery.
All programming necessary to fly the
complete AMA Stunt Pattern. Fully field
tested by stunt flyers.
The venerable RINGMASTER can be taken
apart for easy transportation. Electric
Powered, it can be carried on a commercial
aircraft.
The only “Flip the switch and fly” system on
the market. Power package which includes
prop, motor, speed controller, KR Governor &
Battery is fully bench tested and comes ready
to install.
2013 – Revised 11/13/2013
Part #
Price
P15E
179.95
TARINGPKG 249.99
Page 32
Building Supplies
Plans for RSM Kits
All RSM plans are printed on white bond paper using a plotter.
They come rolled in a shipping tube.
Profile Stunters
Name
Mark 1
Miss Ashlee
Miss Sarah
OTS Ringmaster
P40 Warhawk
P51-15
Description
Beginner Trainer for .35 by Eric Rule
1/2A Profile for Cox Baby Bee
“Cosmic Wind” Profile for .35
Ringmaster by M. Kania
Precision Profile for .35 by Eric Rule
Profile Stunter for .15 by Ron Burn
Pages
1
1
1
1
1
1
Price
15.00
10.00
15.00
15.00
15.00
15.00
Part #
M1PLN
MAPLN
MSPLN
RGPLN
P40PLN
P15PLN
Pages
1
1
1
1
1
1
1
1
1
1
1
Price
15.00
15.00
15.00
15.00
15.00
15.00
15.00
15.00
15..00
15.00
15.00
Part #
ADPLN
BBPLN
BJOBPLN
DGPLN
HUPLN
JMPLN
MADPLN
RGPLN
STPLN
SKINGPLN
VNPLN
Old Time Legal
Name
Adams’ Special
Belfrey Bound
Big Job
Dragon
Humongeous
Jamison
Madman
OTS Ringmaster
Stuka
Stunt King
Venus
Description
1950 Stunter by Frank Adams
Dale Kirn’s “Bat like” Stunter
Adie Naccarato’a Big Job
J.C. “Madman” Yates’ design
1949 design by Ted Snow
Nats Winner by Bud Jamison
J.C. “Madman” Yates design
Matt Kania’s Profile
Don Still’s design
Stunt King
Venus by Jim Ebejar
Classic Legal Stunters
Name
Blue Bird
Chipmunk
Continental
Cougar
Crusader
Electra
Feno
Fierce Arrow
Fury
Gladiator
Grey Ghost
Hawker Hunter
Humbug
Lark
ME 109
Miss Sarah
Neptune II
Nobler
Pinto
2013 – Revised 11/13/2013
Description
Charlie Mackey’s First Published Design
By Joe Dill
Continental by Tom Warden
Cougar Stunter
Twin Boom for .35 by Charles Mackey
Nats Winner by Dick Williams for .35
1959 design by Ted Goyet for .25
“Wild Bill” Netzeband’s Delta Wing
Fury by Lew Wolgast
By Dennis Shauer
Grey Ghost by Larry Scarinzi
1969 Classic by Bob Whitely
Classic Stunter by “Wild Bill”
Classic Legal for .35 by Charles Mackey
ME 109 by Charles Mackey
“Cosmic Wind” Profile for .35
Classic “I-beam” by Jim Ebejer
1957 “Green Box” Nobler Classic Legal
1/2A Precision by Dee Rice
Pages
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Price
15.00
15.00
15.00
15.00
15.00
15.00
15.00
15.00
15.00
15.00
15.00
20.00
15.00
15.00
15.00
15.00
15.00
15.00
10.00
Part #
BBDPLN
CHIPPLN
CONTPLN
COUGPLN
CRPLN
ELPLN
FNPLN
FAPLN
FURYPLN
GLADPLN
GHSTPLN
HAWPLN
HUMPLN
LKPLN
ME109PLN
NEPPLAN
MSPLN
NOPLN
PIPLN
Page 33
Classic Legal Stunters
Name
Description
Ruffy
Lew MacFarland’s Nats Winner for .35
Shark 35
by Lew MacFarland
Shark 45
Nats Winner by Lew MacFarland for .46 or
.60
Skylark
Ed Southwick’s Classic Winner for .35 or
.46
Space Hound
Space Hound
Super Ringmaster Super Ringmaster
T Bird II
Bob Palmer’s 1959 Nats Winner for .35
Tempest
Nats Winner by Bart Klapinski for .35
Tony
1963 British Nats Winner by Frank
Warburton
Tucker Special
Nats Winner by Bob Tucker for .35
Pages
1
1
1
Price
15.00
15.00
15.00
Part #
RUPLN
SHR35PLAN
SKPLN
1
15.00
SYPLN
1
1
1
1
1
15.00
15.00
15.00
15.00
15.00
HNDPLN
SRNGPLN
TBPLN
TMPLN
TYPLN
1
15.00
TKPLN
Pages
1
1
1
1
1
1
Price
15.00
15.00
10.00
15.00
20.00
20.00
Part #
BUCPLN
DRPLN
HTPLN
HKPLN
LAPLN
WARMPLN
1
1
1
1
1
1
1
1
15.00
20.00
15.00
15.00
15.00
15.00
20.00
20.00
KELLPLN
MOSSIEPLAN
OPPLN
P4KPLN
P51PLN
PENPLN
PENPLN60
SHPLN
1
1
1
1
15.00
20.00
20.00
20.00
STARPLN
TGPLN
TGPARTS
TGDWG
1
1
45.00
20.00
TGSET
TPPLN
Modern Stunters
Name
Buccaneer II
Derringer 46
Hunter Stunter
Hurricane
L.A. Heat
L.A. Warmth
Miss Kell
Mosquito
Oriental Plus
P40K
P51D
Pentastar 46
Pentastar 61
Shoestring 2000
Starduster
Thunder Gazer
Trivial Pursuit
2013 – Revised 11/13/2013
Description
Buccaneer Mark II by Allen Brickhaus
Nats Winner by Bob Whitely for .46
1/2A Precision Stunter by Eric Rule
Semi Scale for .35 by Jack Sheeks
Twin Engine by Bob Whitely
Twin .15 inspired by Bob Whitely’s L.A.
Heat
Miss Kell by Bob Whitely
Twin Engine by Jack Sheeks
by Dee Rice for .40 Tuned Pipe
Precision Stunter for .40 by Pat Johnston
Precision Stunter for .46 by Eric Rule
Lou Wolgast's 46 sized Pentastar
Lou Wolgast's 61 sized Pentastar
Bob Whitely’s 2000 Nats Model .50 tuned
pipe
Starduster by Ed Capitanelli
David Fitzgerald's World Champion
All laser cut part outlines
Assembly drawings including pictures of
take apart assemblies
Set of all three drawings
Ted Fancher’s Special Edition .60 tuned
pipe
Page 34
Laser Cut Rib Sets from Hobby Fastener Kits
Description
“Adams’ Special” Rib Set
“Belfry Bound” Rib Set
“Big Job” Rib Set
“Blue Bird” Rib Set
“Buccaneer” Rib Set
“Chipmunk Rib Set
“Continental” Rib Set
“Cougar” Rib Set
“Derringer 46” Rib Set
“Dragon” Rib Set
“Electra” Rib Set
“Feno” Rib Set
“Fierce Arrow” Rib Set
“Fury” Ribs
“Gladiator” Rib Set
“Green Box Nobler” Rib Set
“Grey Ghost” Rib Set
“Hawker Hunter” Rib Set
“Humbug” Rib Set
“Humongous” Rib Set
“Hunter Stunter” Rib Set
“Jamison Special” Rib Set
“L.A. Heat” Rib Set
“L.A. Warmth” Ribs
“Mackey Crusader” Rib Set
“Mackey Lark” Rib Set
“Madman” Rib Set
“Mark 1” Rib Set
“ME 109” Ribs
“Miss Ashlee” Rib Set
“Miss Kell” Ribs
Part #
ADMRIB
BELRIB
BJOBRIB
BBRDRIB
BUCRIB
CHIPRIB
CONTRIB
COUGRIB
DERRIB
DRAGRIB
ELECRIB
FNRIB
FARIB
FURYRIB
GLADRIB
NOBRIB
GHSTRIB
HAWKRIB
HBUGRIB
HUMRIB
HTRRIB
JAMRIB
LARIB
WARMRIB
CRURIB
LARKRIB
MADRIB
MARKRIB
MERIB
ASHRIB
KELLRIB
Price
29.99
39.99
29.99
29.99
39.95
34.95
39.95
39.95
29.99
29.95
29.99
29.99
29.99
39.95
34.95
29.99
39.95
39.99
29.99
29.99
19.99
29.99
39.99
39.95
29.99
29.99
29.99
29.99
39.95
19.99
39.95
Description
“Miss Sarah” Rib Set
“Mosquito” Rib Set
“Neptune II” Rib Jig
“Oriental Plus” Rib Set
“Oriental” Rib Set
“OTS Ringmaster” Rib Set
“P40” Profile Rib Set
“P40K Tiger” Rib Set
“P51-15” Rib Set
“P51D Mustang” Rib Set
“Pathfinder LE” Rib Set
“Pentastar” Rib Set
“Pinto” Rib Set
“Ruffy” Rib Set
“Shark 35” Rib Set
“Shark 45” Rib Set
“Sheeks Hurricane” Rib Set
“Skysport” Rib Set
“Starduster 40” Ribs
“Stills Stuka” Rib Set
“Ta-152” Rib Set
“Tempest” Rib Set
“Thunderbird II” Rib Set
“Trivial Pursuit” Rib Set
“Tucker Special” Rib Set
“Venus” Rib Set
“Warburton Tony” Rib Set
“Yates Dragon” Rib Set
Southwick “Skylark” Rib Set
Whitely “Shoestring” Rib Set
Part #
SARRIB
MOSSIERIB
NEPJIG
OPLUSRIB
ORRIB
RINRIB
P40RIB
P40KRIB
P15RIB
P51DRIB
PATHRIB
PENRIB
PINRIB
RUFRIB
SHAR35RIB
SHARRIB
HURKRIB
SKYRIB
STARRIB
STURIB
TARIB
TEMRIB
TBRIB
TPRIB
TUCKRIB
VENRIB
TONYRIB
DRARIB
SKYRIB
SHOERIB
Price
29.99
29.99
5.99
39.99
29.99
29.99
29.99
29.99
29.99
29.99
34.99
34.99
19.99
34.99
29.99
34.99
29.99
34.99
39.95
29.99
34.99
29.99
29.99
39.99
29.99
29.99
29.99
34.99
34.99
39.99
Wheel Pants and Strut Covers
Description
Part #
“Crusader” Trike Wheel Pants WPCRUS
“Derringer 46” Strut Covers
WPDER
Price
21.99
7.99
“Electra” Strut Covers
“Hurricane” Strut Covers
“L.A. Heat” Strut Covers
“Lark” Wheel Pants
“Nobler” Strut Covers
“P40K” Strut Covers
7.99
7.99
7.99
14.99
7.99
7.99
2013 – Revised 11/13/2013
WPELEC
WPHURK
WPHEAT
WPLARK
WPNOB
WPP40K
Description
“P51D Mustang” Strut Covers
“Pinto” Wheel Pants
“Shark 45” Strut Covers
“Shoestring” Wheel Pants
“Tempest” Strut Covers
“Tucker Special” Wheel Pants
“Warburton Tony” Strut Covers
Part #
WPP51D
WPPINTO
WPSHAR
WPSHOE
WPTEMP
WPTUCK
WPTONY
Price
7.99
12.99
7.99
14.99
7.99
14.99
7.99
Page 35
Wheels
Dave Brown Wheels
If you are putting the wheels into wheel pants the Lectra-Lite are a perfect choice!
Lectra-Lite wheels are approximately 2/3 the thickness of the regular Lite-Flite wheels.
Lite-Flite Wheels
Description
1-1/2” Treaded
1-3/4” Treaded
2” Treaded
2-1/4” Treaded
2-1/2” Treaded
2-3/4” Treaded
3” Treaded
Lectra-Lite Wheels
Description
1-3/4” Narrow Treaded
2” Narrow Treaded
2-1/4” Narrow Treaded
Part #
DB5817
DB5820
DB5822
Part #
DB5715
DB5717
DB5720
DB5722
DB5725
DB5727
DB5730
Price
4.50
5.25
5.50
5.75
6.25
6.75
7.25
Tailwheels
Price
5.25
5.50
5.75
Description
3/4” Plastic Tailwheel
3/4” Aluminum Hub Rubber
Tread
1” Aluminum Hub Rubber
Tread
1-1/4” Aluminum Hub Rubber
Tread
Part #
SH451
DU75TW
Price
1.75
2.25
DU100TW 2.40
DU125TW 2.55
Landing Gear
Profile Main & Tailwheel Gear
Description
Long Duralloy Gear - fits
Twister and similar models
Short Duralloy Gear - fits
Ringmaster - Flight Streak
and similar models
1/8” Wire with clips &
eyelet
Profile Tailwheel Mount
2013 – Revised 11/13/2013
Part #
PLGL
Price
13.99
PLGS
11.95
BM011
2.99
PTWM
1.95
Built-Up Main & Tailwheel Gear
Description
1/8” Grooved Block Mount
Pkg
Fuse. Mount Duralloy Gear
– Large
1/8” Wire Wing Mount Gear
Trike “Shark” 1/8 Wire Gear
Trike “L.A. Heat” 1/8 Wire
Gear
Trike “Tempest” 1/8 Wire
Gear
Full Body Tailwheel Gear
Part #
LGM18
Price
2.99
BULG-L
13.99
BM016
BM022
BM023
3.99
5.99
5.99
BM024
5.99
FTWM
2.99
Page 36
Canopies from Hobby Fasteners Kits
Description
“Adams’ Special” Canopy
“Blue Bird” Canopy
“Chipmunk” Canopy
“Cougar” Canopy
“Derringer” Jet Canopy
“Fierce Arrow” Canopy
“Green Box Nobler” Canopy
“Grey Ghost” Canopy
“Hawker Hunter” Canopy
“Hunter Stunter” Canopy
“Hurricane” Canopy
“Jamison Special” Canopy
“L.A. Heat” Canopy
“L.A. Warmth” Canopy
“Mackey Crusader” Canopy
“Mackey Lark” Canopy
“Madman” Canopy
“ME-109” Canopy
“Miss Kell” Canopy
“Mosquito” Canopy
Part #
ADMCAN
BBRDCAN
CHIPCAN
COUGCAN
CDER
FACAN
NOCAN
GHOSTCAN
HHCAN
HSCAN
HURCAN
JAMICAN
WC813
WARMCAN
WC807
LARKCAN
MADCAN
CANME
KELLCAN
MOSSCAN
Price
7.99
7.99
8.99
7.99
12.99
7.99
5.99
3.99
12.99
5.99
7.99
5.99
9.99
7.99
5.99
7.99
7.99
7.99
7.99
12.99
Description
“Neptune II” Canopy
“Oriental Plus” Canopy
“P40K” Canopy
“P51D” Canopy
“Pathfinder LE” Canopy
“Pinto” Canopy
“Ruffy” Canopy
“Shark 35” Canopy
“Shark 45” Canopy
“Shoestring” Canopy
“Skylark” Canopy
“Space Hound” Canopy
“Stills Stuka” Canopy
“Ta-152” Canopy
“Tempest” Canopy
“Thunderbird” Canopy
“Tony” Canopy
“Trivial Pursuit” Canopy
“Venus” Canopy
Part #
NEPCAN
OPLUSCAN
P40KCAN
WC809
PATHCAN
CS005
RUFFCAN
SHR35CAN
SHARCAN
SHOECAN
CANSKY
HOUNDCAN
STCAN
TACAN
TEMPCAN
TBCAN
TONYCAN
TPCAN
VENCAN
Price
7.99
7.99
12.99
7.99
12.99
5.99
7.99
5.99
5.99
12.99
7.99
11.99
8.99
12.99
12.99
7.99
12.99
7.99
7.99
Covering Materials
Chinese Silk - The finest quality with a much tighter weave than ordinary silk. This means that you will use less dope to
fill this silk, which will result in a lighter finish.
Polyspan is a polyester tissue that is waterproof and much stronger than silkspan. Finishing methods are similar to silk
and silkspan
Chinese Silk
Polyspan
Description
Part # Price
Light Silk 48” X 36” LS002 12.99
Description
Part # Price
Polyspan covering 12ft X 20” roll PSPAN 18.00
Silk Span
Description
Part # Price
Light weight Silkspan
OO 2.05
Medium weight Silkspan GM 2.35
2013 – Revised 11/13/2013
Page 37
Miscellaneous Building Supplies
Heat Shrink Tubing
Description
1/16” – 5 pieces
3/32” – 5 pieces
1/8” – 5 pieces
3/16” – 4 pieces
1/4” – 4 pieces
3/8” – 4 pieces
Assorted sizes
(2 pieces each size)
1/16” X 18” – 2 pieces
3/32” X 18” – 2 pieces
1/8” X 18” – 2 pieces
3/16” X 18” – 2 pieces
Cyanoacrylate Glue (CYA)
Part #
HF435
HF436
HF437
HF438
HF439
HF440
HF441
Price
1.49
1.49
1.49
1.49
1.49
1.49
4.50
HF435B
HF436B
HF437B
HF438B
2.50
2.50
2.50
2.50
Carbon Fiber Tapes, Mats, and Strips
Description
Part #
Price
3/10 oz per Sq Yard Mat – 36”x36” CFMAT1 16.99
Description
1 oz Thin CyA
2 oz Thin CyA
16 oz Thin CyA
1 oz Gap Filling CyA
1 oz Extra Thick CyA
2 oz Accelerator with Pump
8 oz Accelerator Refill
1 oz Replacement Bottle
2 oz Replacement Bottle
Replacement Bottle Cap
8” CyA Applicator – 12 pack
Part #
HFCA1
HFCA2
HFCA16
HFCAG1
HFCAG2
HFCAG16
HFCAT1
HFCAT2
HFCAT16
HFCAAC2
HFCAAC8
HFBOT1
HFBOT2
HFCAP
DB8100
Price
4.99
8.99
47.99
4.99
8.99
47.99
4.99
8.99
47.99
4.99
9.99
.95
1.49
.99
6.99
Lead Weights and Weight Boxes
Razor Blades
Description
Part # Price
Single Edge Razor Blade #9 – 8 pack HF400 1.29
Mounting Tools and Balsa Gauge
Description
RSM Balsa Gauge
RSM Engine Mounting Tool for OS
35-40 FP & LA 35-40 & 46
RSM Engine Mounting Tool for ST
40 & 46
G 51
60
Part #
GAUGE
Price
$3.99
OSMNT
$2.99
2013 – Revised 11/13/2013
Part #
SH561
HF280
HFWTB
Price
375
5.49
3.99
Music Wire
Description
Part # Price
3/32” x 36” Long MW332 1.10
1/8” x 36” Long MW18 1.15
ST46MNT $2.99
51MNT
$2.99
ST60MNT $2.99
Control Horns
Description
Laser Cut 1/8” Elevator Horns
Laser Cut 3/16” Elevator Horns
“T” Style Nylon Medium
(2 pack)
RSM 3/32” Flap Horn (3 hole)
RSM 1/8” Flap Horn (3 hole)
RSM 3/32” Elevator Horn
RSM 1/8” Elevator Horn
3/32” Wire Horn “Lucky” Boxes
1/8” Wire Horn “Lucky” Boxes
Description
1/4 oz with mounting hole – 6
3 oz strip in 1/4 oz snap offs – 2
Adjustable Wing Tip Weight Box
Uses SH561 ¼ oz weights
Part #
SHORN
RHORN
SH221
Price
.99
.99
.75
HF332-3
HF18-3
HF332-2
HF18-2
HFLB332
HFLB18
7.49
7.49
7.49
7.49
2.75
2.75
Bellcranks
Description
Fox 2” Aluminum
Nylon 3”
Fox 3” Aluminum
Sig 4” Nylon
4” Nylon Suspended Bellcrank
4” Carbon Fiber, Suspended
Bellcrank
Part #
FX86778
HF1001
FX86779
SH754
HF1002
HF1003
Price
8.00
2.99
8.00
7.50
9.99
19.99
Pushrods
Description
Part # Price
Single 30” Pushrod System
HF549 5.95
1/4” x 30” Glass fiber Pushrod CB1
4.50
Page 38
Control Line Engines
Stock Engines
Description
Magnum .15 XLS Engine
OS 25 LA C/L
OS 46 LA C/L
Part #
MAG15
OSLA25
OSLA46
Price
89.95
94.99
109.95
Engine Accessories
Tongue and Tube Mufflers
Description
Tongue Muffler for Fox 35 & OS40
Tongue Muffler for Brodak .25 & .40
Tongue Muffler for OS 35S, K&B 40 &
OS 25 FP
Tongue Muffler for Super Tigre 4651&60
Tube Muffler for Fox 35 & OS35-40FP
Tube Muffler for LA.46
Tongue Muffler for Fox 35 & OS40
Tongue Muffler for Brodak .25 & .40
Tongue Muffler for OS 35S, K&B 40 &
OS 25 FP
Tongue Muffler for Super Tigre 4651&60
2013 – Revised 11/13/2013
Glow Plugs
Part #
Price
TMUF
19.95
TMUFB
21.95
TMUFOS35S 21.95
TMUFST
21.95
TUBEFX
TUBELA46
TMUF
TMUFB
TMUFOS35S
39.95
39.95
19.95
21.95
21.95
TMUFST
21.95
Fireball Glow Plugs
Description
Part #
Standard Long Plug
S20L
Standard Short Plug
S20S
R/C Long Plug with Idle Bar S20RCL
R/C Short Plug with Idle Bar S20RCS
Extra Hot Long Plug
H30L
Extra Hot Short Plug
H30S
Super Cool High Nitro Long SC10L
Plug
Super Cool High Nitro Short SC10S
Plug
Price
3.49
3.49
3.95
3.95
3.49
3.49
3.95
3.95
Page 39
Fox Parts
Description
Hemi Head for Fox .35 designed by
Larry Foster
Backplate Stuffer for Fox .35
Laser cut Custom Back Plate Gasket
Standard Piston & Liner for Fox .35
Crankshaft for Fox .35
Crankshaft Stud for Fox .40
Thrust Washer for Fox .35
Prop Washer for Fox .35
Crankcase for Fox .35
Standard Muffler for Fox .35
Venturies
Part #
LJ35H
Price
34.95
FX13511H
FX35BP
FX35050
FX35170
FX40185
FX35220
FX35230
FX35100
FX9225
19.25
1.99
65.50
26.00
3.50
15.80
6.00
36.40
20.95
Part #
STNVA
Price
9.99
Description
Delrin Venturi for
OS .35-.40 FP
Delrin Venturi for OS LA .46
Delrin True Venturi for
SuperTigre 46
Delrin True Venturi for
SuperTigre 60
Delrin Venturi for OS LA 25
Delrin Venturi for Magnum .15
Needle Valves
Description
Super Tigre .51 Needle Valve
Assembly (Fits Fox .35)
Super Tigre Long Needle
Assembly (fits OS .40FP)
Assembly
2013 – Revised 11/13/2013
Price
9.99
VENLA46 11.99
VENST46 16.99
VENST60
16.99
VENLA25 9.99
VENXLS 19.99
Prop Shaft Extensions
STNV
2.99
STNVA46 14.99
STNVA60 16.99
Description
10-32 x1/2 Prop Extension
10-32 x 3/4 Prop Extension
1/4-28 x 1/2 Prop Extension
Mounting Pads and Templates
Description
Phenolic Engine Mounting Pads (2)
RSM Engine Mounting Tool for
OS 35-40 FP & LA 35-40 & 46
RSM Engine Mounting Tool for
ST 40 & 46
RSM Engine Mounting Tool for ST G
51
60
Part #
VENOS
Price
8.00
8.00
8.00
8.00
8.00
8.00
Screw and Gasket Sets
Part #
HFEP
OSMNT
Price
1.99
2.99
ST46MNT 2.99
51MNT
Part #
FX90410
FX90411
FX90412
FX90413
FX90414
FX90415
2.99
ST60MNT 2.99
Description
Laser Cut Custom Back Plate
Gasket for Fox .35
"Back Plate Gasket" for LA .25
"Back Plate Gasket Kit" for LA
.25
"Back Plate Gasket Kit" for LA
.46
Screws & Gasket Set for
Fox .35
Gasket Set for ST 60
Socket Head Bolt Set for
Fox .35
Part #
FX35BP
Price
1.99
LAS25BP
1.99
LAS25BPK 5.75
LAS46GK
3.95
FX35SG
3.99
ST60G
FX35SH
3.99
2.99
Page 40
Propellers
RSM Propellers
 CNC machined on a 3 axis router to insure that both blades are identical
 High quality finish applied to resist fuel deterioration
 Smooth prop face combined with thin blade reduces load on engine
 Efficient airfoil shape
Description
RSM Propeller 9-6
RSM Propeller 10-6
RSM Propeller 11-6
RSM Propeller 12-5.5
Part #
RSM0906
RSM1060
RSM1160
RSM1255
Price
5.99
6.25
6.75
7.25
RSM Propeller Test Data
CNC machined on a 3 axis router to insure that both blades are identical
High quality finish applied to resist fuel deterioration
Smooth prop face combined with thin blade reduces load on engine
Efficient airfoil shape
20 thousands of an inch undercamber to increase thrust
Pitch of Props
Using a Prather Pitch Gauge we measured Stations 7 & 10 (which is the area that the propeller uses to create thrust) to
determine the actual pitch.
Station 7
Station 10
10” Prop
5.5
5.2
11” Prop
5.9
4.8
Static Testing
We compared the RSM 10” prop against the Rev-Up 10-6 EW and the George Aldrich Custom Special 10-6. Engine used
was a Hunter .19 diesel. This engine was chosen to determine how much the test props would load down the engine.
Optimum engine performance was obtained for each prop tested.
Prop Tested
Rev-Up 10-6 EW
Aldrich 10-6
Custom
RSM 10-6
RPM
Achieved
7400
7400
Static Thrust
8600
36 oz
28 oz
28 oz
This test showed that the RSM prop had 20% more static thrust while not loading down the engine.
2013 – Revised 11/13/2013
Page 41
Prop Wrenches and Reamers
Description
Fox 4-Way Prop Wrench
Fox 4-Step Reamer
Fox 7-8mm Reamer
Fox 10mm Reamer
Part #
FX70104
FX70201
FX70202
FX70203
Price
15.95
12.00
12.00
12.00
Spinners
Aluminum
Carbon Fiber
Description
Part #
Price
1-3/4” – weight 8/10 oz
VOR175 20.95
2” – weight 1-1/10 oz
VOR200 21.95
2-1/4” – weight 1-1/2 oz VOR225 22.95
1-3/4” Needle Nose
VOR175N 26.95
2” Needle Nose
VOR200N 27.95
2-1/4” Needle Nose
VOR225N 29.95
1/4-28 adapter nut short
NUT1
5.95
1/4-28 adapter nut long
NUT2
5.95
Description
Part #
Price
1-3/4” (42mm) CF175 29.99
2” (52mm)
CF200 32.99
2-1/4” (58mm) CF2125 37.99
Plastic
Color Size
White 1-1/2”
1-3/4”
2”
2-1/4”
Black 1-1/2”
1-3/4”
2”
2-1/4”
Red
1-1/2”
1-3/4”
2”
2-1/4”
Part #
SH15-1
SH175-1
SH20-1
SH225-1
SH15-2
SH175-2
SH20-2
SH225-2
SH15-3
SH175-3
SH20-3
SH225-3
Price
3.89
4.39
4.99
5.79
3.89
4.39
4.99
5.79
3.89
4.39
4.99
5.79
Color
Blue
Size
1-1/2”
1-3/4”
2”
2-1/4”
Yellow 1-1/2”
1-3/4”
2”
2-1/4”
Part #
SH15-4
SH175-4
SH20-4
SH225-4
SH15-5
SH175-5
SH20-5
SH225-5
Price
3.89
4.39
4.99
5.79
3.89
4.39
4.99
5.79
Fuel Lines, Filters, and Fillers
In-Line Fuel Filters
Description
“Crap Trap” Filter
Part #
SU187
Fuel Filler Syringes
Price
4.90
Description
5 oz Monoject Syringe
Part #
HF679
Price
11.95
High Heat Silicone Fuel Line
Description
.062 I.D. Silicone Fuel Line 2 ft
.062 I.D. Silicone Fuel Line 25 ft
2013 – Revised 11/13/2013
Part #
FLM2
FLM25
Price
3.49
34.95
Page 42
Tanks
If you have an application that requires a special tank, please contact our office at
(951) 678-1406 to discuss your needs.
Profile Uniflow (HF Style)
Built-up Uniflow Slide In (BU Style)
2” Wide X 1” High
All plumbing forward
Capacity
2 oz.
2.5 oz.
3 oz.
3.5 oz.
4 oz.
4.5 oz.
5 oz.
5.5 oz.
Length
2 in.
2 1/2 in.
3 in.
3 1/2 in.
4 in.
4 1/2 in.
5 in.
5 1/2 in.
Part #
HF200U
HF250U
HF300U
HF350U
HF400U
HF450U
HF500U
HF550U
Price
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
Capacity
2.5 oz
3 oz
3.5 oz
4 oz
4.5 oz
5 oz
5.5 oz
6 oz
6.5 oz
7 oz
Length
2 1/2 in.
3 in.
3 1/2 in.
4 in.
4 1/2 in.
5 in.
5 1/2 in.
6 in.
6 1/2 in.
7 in.
Part #
GRW250BU
GRW300BU
GRW350BU
GRW400BU
GRW450BU
GRW500BU
GRW550BU
GRW600BU
GRW650BU
GRW700BU
Price
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
Profile Standard Vent (S Style)
Snub-Nose Uniflow (U Style)
2-3/16” Wide X 1-7/16” High
2-1/4” Wide X 1-1/4” High
Designed for short nosed ships like a Flight Streak,
Ringmaster or Buster
Capacity
3 oz
3.5 oz
4 oz
4.75 oz
5.25 oz
Length
2.25 in.
2.65 in.
3.05 in.
3.45 in.
3.90 in.
2013 – Revised 11/13/2013
Part #
GRW300S
GRW350S
GRW400S
GRW475S
GRW525S
Price
11.00
11.00
11.00
11.00
11.00
Capacity Length
2 oz
1.40 in.
2.5 oz
1.875 in.
3 oz
2.25 in.
3.5 oz
2.65 in.
4 oz
3.05 in.
4.75 oz
3.45 in.
Part #
GRW200U
GRW250U
GRW300U
GRW350U
GRW400U
GRW475U
Price
11.00
11.00
11.00
11.00
11.00
11.00
Page 43
Built-up Uniflow Slide In (WU Style)
Old Time Stunt Uniflow
Specially Designed for Upright Engines
Length
Part #
Price
3 in.
GRW300WU 12.00
3 ½ in. GRW350WU 12.00
4 in.
GRW400WU 12.00
4 ½ in. GRWG50WU 12.00
5 in.
GRW500WU 12.00
5 ½ in. GRW550WU 12.00
6 in.
GRW600WU 12.00
6 ½ in. GRW650WU 12.00
7 in.
GRW700WU 12.00
Capacity Length
2.5 oz
2 1/2 in.
3 oz
3 in.
3.5 oz
3 1/2 in.
4 oz
4 in.
Capacity
3 oz
3.5 oz
4 oz
4.5 oz
5 oz
5.5 oz
6 oz
6.5 oz
7 oz
Chicken Hopper Style (C Style)
Part #
OTS250
OTS300
OTS350
OTS400
Price
12.00
12.00
12.00
12.00
Balloon Tanks For 1/2A
Description
Balloon Tank for
1/ 2 A
Balloon Tank Kit
Capacity
1.75 oz
Part #
BALL
Price
5.95
--
BALLKIT
2.95
Tank Accessories
Capacity
2 oz
3.25 oz
3.75 oz
4.25 oz
5 1/8 oz
5.75 oz
Length
Part #
Price
1.40 in. GRW200C 17.99
2.25 in. GRW325C 17.99
2.65 in. GRW375C 17.99
3.05 in. GRW425C 17.99
3.45 in. GRW5125C 17.99
3.90 in. GRW575C 17.99
2013 – Revised 11/13/2013
Description
Tank Vent Caps (6)
Fuselage Vent Tubes
Part #
GRWTVC
GRWFVT
Price
1.99
4.95
Page 44
Handles and Lines
Control Line Handles
Description
“Renger” 1/2A Handle
“Renger” .15 Handle
1/2A Handle with Lines
Expert Level w/Length and
Spacing Adjustments
Replacement Safety Thong
Replacement Wooded Grip
Replacement Front Bar (includes
Cable)
Replacement Handle Cable
Handle Grip Tape
.016" Copper Wrapping Wire
Line Wrapping Set - Wire +
Eyelets
Line Connectors
Part #
R12A
R15A
SH544
HFPRO
Price
9.99
11.99
3.30
34.95
THONG
HFWOOD
HFBAR
1.99
11.99
20.99
HFCABLE
HGTAPE
HF601
HF602
6.95
4.95
1.05
1.99
Description
Slide Style 15# 1/2A Clip (4)
Slide Style 22# A-B Clip (4)
Line Connector, Squeeze Style 80#
C-D Clip 4 pack
Line Connector, Squeeze Style
100# C-D Clip (4)
Price
1.25
1.50
4.99
CLCON114 5.99
Line Reels
Description
Part # Price
4" Plastic Line Reel
CLR 3.99
Stainless Steel Line Clips MLC .99
Eyelets & Crimp Sleeves for Lines
Description
Bag of 25 Line Eyelets
Chrome Plated Brass Sleeves
for.012-.018 Wire (50)
Chrome Plated Brass Sleeves
for.018-.027 Wire (50)
Part #
CONS
CONM
CLCON112
Part #
Price
HF600
2.99
HFSL052 5.49
HFSL071 7.99
Leadout Wire Sets
Description
1/2A Leadout Wire Kit .021 X 4'
C-D Leadout Wire Kit .027 X 6'
C-D Leadout Wire Kit .027 X 12'
Adjustable Leadout Guide Wood
Twin Adjustable Leadout Guide
Part #
HF021-4
HF027-6
HF027-12
LOG1
LOG2
HFWTB
Price
2.25
3.25
3.95
4.25
4.95
3.99
Stainless Steel Control Lines
All control lines are not identical! Don't be fooled by lines that “fly smoother". If you reduce the diameter of the lines they
will "fly smoother". RSM Distribution guarantees that our line will measure at least the minimum necessary diameter
required by AMA rules!
Braided Control Lines on 4" Reel
Description
.008 Control Line 35' Long
2013 – Revised 11/13/2013
Part #
CL008X2-35
CL008X2-52
CL008X2-70
CL012X2-35
CL012X2-52
CL012X2-70
CL015X2-52
CL015X2-60
CL015X2-70
CL018X2-60
CL018X2-70
Price
8.60
14.99
19.99
14.40
15.99
20.75
13.49
16.99
18.99
16.99
18.99
Bulk Line on Reel
Description
.015 Braided Line X 1,000 Feet
.018 Braided Line X 1,000 Feet
Twin Adjustable Leadout Guide
Part #
CL015B
CL018B
LOG2
HFWTB
Price
69.99
69.95
4.95
3.99
Page 45
Hardware
Aircraft Hex Nuts
Size
2-56
4-40
6-32
8-32
Description
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
Part #
HF1
HF1A
HF2
HF2A
HF3
HF3A
HF4
HF4A
Sheet Metal Screws
Price
1.15
3.50
1.15
3.50
1.15
3.50
1.15
3.50
Size
#2 X 1/2
#4 X 3/8
#4 X 1/2
#4 X 3/4
#6 X 1/2
T-Handle Socket Drive Wrench
Fits socket size
4-40
6-32
M2
M2.5
M3
Part #
HF450
HF451
HF460
HF461
HF462
Price
4.95
4.95
4.95
4.95
4.95
#6 X 3/4
#8 X 1/4
#8 X 1/2
#8 X 3/4
Description
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
Heat-Treated Propeller Nuts
Description
1/4-28
5/16-24
M5-0.8
M6-1.0
M7-1.0
M8-1.25
(2 pack)
Part #
HFPN1
HFPN2
HFPN3
HFPN4
HFPN5
HFPN6
Price
.99
2.99
.99
2.99
.99
2.99
.99
2.99
.99
2.99
.99
2.99
.99
2.99
.99
2.99
.99
2.99
Blind Nuts
Size
Price
1.99
1.99
1.99
1.99
1.99
1.99
Part #
HF180
HF180A
HF188
HF188A
HF189
HF189A
HF190
HF190A
HF191
HF191A
HF192
HF192A
HF193
HF193A
HF194
HF194A
HF195
HF195A
Description
bag of 25
4-40
bag of 100
bag of 25
6-32
bag of 100
bag of 25
8-32
bag of 100
bag of 25
10-32
bag of 100
bag of 25
1/4-20
bag of 100
Part # Price
HF20 2.99
HF20A 8.99
HF21 3.35
HF21A 9.99
HF22 3.35
HF22A 9.99
HF23 3.35
HF23A 9.99
HF24 3.35
HF24A 9.99
Mounting Bolt Sets
2013 – Revised 11/13/2013
Round Head Bolts
Round Head Bolts
With Nuts and Washers
Size
Part # Price
4-40 X 1-1/4 HF127 1.10
6-32 X 1-1/4 HF128 1.10
With Nuts and Washers
Size
Part # Price
4-40 X 1-1/4 HF127 1.10
6-32 X 1-1/4 HF128 1.10
Page 46
Socket Head Bolts
Size
Description
bag of 25
2-56 X 1/4
bag of 100
bag of 25
2-56 X 3/8
bag of 100
bag of 25
2-56 X 1/2
bag of 100
bag of 25
4-40 X 1/4
bag of 100
bag of 25
4-40 X 3/8
bag of 100
bag of 25
4-40 X 1/2
bag of 100
bag of 25
4-40 X 3/4
bag of 100
bag of 25
4-40 X 1
bag of 100
bag of 25
4-40 X 1-1/4
bag of 100
Part #
HF71
HF71A
HF72
HF72A
HF73
HF73A
HF74
HF74A
HF75
HF75A
HF76
HF76A
HF77
HF77A
HF78
HF78A
HF79
HF79A
Price
4.65
13.99
4.65
13.99
4.65
13.99
2.35
6.99
2.35
6.99
2.35
6.99
2.35
6.99
4.65
13.99
4.65
13.99
Size
4-40 X 1-1/2
6-32 X 1/4
6-32 X 1/2
6-32 X 3/4
6-32 X 1
6-32 X 1-1/4
6-32 X 1-1/2
8-32 X 1-1/2
Description
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
Part #
HF80
HF80A
HF81
HF81A
HF82
HF82A
HF83
HF83A
HF84
HF84A
HF85
HF85A
HF86
HF86A
HF87
HF87A
Price
4.65
13.99
2.35
6.99
2.35
6.99
2.35
6.99
2.35
6.99
4.65
13.99
4.65
13.99
2.35
6.99
Description
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
Part #
HF57
HF57A
HF58
HF58A
HF59
HF59A
HF60
HF60A
HF61
HF61A
HF62
HF62A
HF63
HF63A
HF64
HF64A
Price
1.99
6.99
1.99
6.99
1.99
6.99
1.99
6.99
1.99
6.99
1.99
6.99
1.99
6.99
1.99
6.99
Round Head Bolts
Size
Description
bag of 25
2-56 X 3/16
bag of 100
bag of 25
2-56 X 3/8
bag of 100
bag of 25
2-56 X 1/2
bag of 100
bag of 25
2-56 X 3/4
bag of 100
bag of 25
2-56 X 1
bag of 100
bag of 25
4-40 X 1/4
bag of 100
bag of 25
4-40 X 1/2
bag of 100
bag of 25
4-40 X 3/4
bag of 100
2013 – Revised 11/13/2013
Part #
HF49
HF49A
HF50
HF50A
HF51
HF51A
HF52
HF52A
HF53
HF53A
HF54
HF54A
HF55
HF55A
HF56
HF56A
complete with nuts
Price
Size
1.99
4-40 X 1
6.99
1.99
4-40 X 1-1/4
6.99
1.99
4-40 X 1-1/2
6.99
1.99
6-32 X 1/2
6.99
1.99
6-32 X 3/4
6.99
1.99
6-32 X 1
6.99
1.99
6-32 X 1-1/4
6.99
1.99
6-32 X 1-1/2
6.99
Page 47
Stainless Steel
Metric Socket Cap Head
10 per bag
Size
4-40 Hex Nuts
4-40 X 1/4 Socket Cap Head
4-40 X 1 Socket Cap Head
4-40 X 1-1/4 Socket Cap Head
4-40 X 1/4 Flat Head Socket Cap
4-40 X 1 Flat Head Socket Cap
Part #
HFS2
HFS74
HFS75
HFS76
HFS77
HFS78
HFS79
HFS80
HFS89
HFS90
HFS91
HFS92
HFS93
HFS94
Price
1.99
2.49
2.49
2.49
2.49
2.49
2.49
2.49
2.49
2.49
2.49
2.49
2.49
2.49
Washers
Size
# 2 Flat Washer
# 4 Flat Washer
# 6 Flat Washer
# 8 Flat Washer
# 2 Lock Washer
# 4 Lock Washer
# 6 Lock Washer
# 8 Lock Washer
Description
bag of 25
bag of 100
bag of 25
bag of 10
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
bag of 25
bag of 100
Part #
HF30
HF30A
HF31
HF31A
HF32
HF32A
HF33
HF33A
HF40
HF40A
HF41
HF41A
HF42
HF42A
HF43
HF43A
Price
.69
1.99
.69
1.99
.69
1.99
.69
1.99
.69
1.99
.69
1.99
.69
1.99
.69
1.99
10 per bag
Size
M3-0.5 X 6 Socket Cap Head
M3-0.5 X 6 Socket Cap Flat Head
Part #
HFM75
HFM76
HFM77
HFM78
HFM79
HFM80
HFM81
HFM82
HFM89
HFM90
HFM91
HFM92
HFM93
HFM94
HFM96
HFM97
HFM98
HFM99
HFM100
HFM101
HFM102
Price
1.99
1.99
1.99
1.99
1.99
2.75
2.75
2.75
1.99
1.99
1.99
1.99
1.99
1.99
1.99
1.99
1.99
1.99
1.99
1.99
1.99
Nylon Bolts
Size
6-32 X 1
10-24 X 1-1/2
10-32 X 2
8-32 X 1
10-32 X 1
1/4-20 X 1
1/4-20 x 1-1/2
1/4-20 x 2
1/4-20 x 1
1/4-20 x 1-1/2
bags of 10
Description
Binder Head
Binder Head
Binder Head
Binder Head
Binder Head
Binder Head
Binder Head
Binder Head
Flat Head
Flat Head
Part #
HF495
HF496
HF497
HF499
HF500
HF501
HF502
HF503
HF510
HF511
Price
1.99
1.99
1.99
1.99
1.99
1.99
1.99
1.99
2.50
2.50
Nylon Flat Washers
Size
Description
bag of 25
#4
bag of 100
bag of 25
#6
bag of 100
bag of 25
#8
bag of 100
bag of 25
# 10
bag of 100
2013 – Revised 11/13/2013
Part #
HF520
HF520A
HF521
HF521A
HF522
HF522A
HF523
HF523A
Price
.79
2.49
.79
2.49
.79
2.49
.79
2.49
Nylon Lock Nuts
Size
Description
bag of 25
4-40
bag of 100
bag of 25
6-32
bag of 100
bag of 25
8-32
bag of 100
Part #
HF11
HF11A
HF12
HF12A
HF13
HF13A
Price
1.99
5.50
1.99
5.50
1.99
5.50
Page 48
Nylon Cable Ties
Color Size Description
White
20/Bag
4"
100/Bag
20/Bag
8"
100/Bag
20/Bag
11"
100/Bag
20/Bag
15"
100/Bag
Black
20/Bag
4"
100/Bag
20/Bag
8"
100/Bag
20/Bag
11"
100/Bag
20/Bag
15"
100/Bag
Blue
20/Bag
4"
100/Bag
20/Bag
8"
100/Bag
20/Bag
11"
100/Bag
20/Bag
15"
100/Bag
Green
20/Bag
4"
100/Bag
20/Bag
8"
100/Bag
20/Bag
11"
100/Bag
20/Bag
15"
100/Bag
Red
20/Bag
4"
100/Bag
20/Bag
8"
100/Bag
20/Bag
11"
100/Bag
20/Bag
15"
100/Bag
2013 – Revised 11/13/2013
Part #
HF101-WHT
HF101-WHT-A
HF111-WHT
HF111-WHT-A
HF113-WHT
HF113-WHT-A
HF115-WHT
HF115-WHT-A
HF101-BLK
HF101-BLK-A
HF111-BLK
HF111-BLK-A
HF113-BLK
HF113-BLK-A
HF115-BLK
HF115-BLK-A
HF101-BLU
HF101-BLU-A
HF111-BLU
HF111-BLU-A
HF113-BLU
HF113-BLU-A
HF115-BLU
HF115-BLU-A
HF101-GRN
HF101-GRN-A
HF111-GRN
HF111-GRN-A
HF113-GRN
HF113-GRN-A
HF115-GRN
HF115-GRN-A
HF101-RED
HF101-RED-A
HF111-RED
HF111-RED-A
HF113-RED
HF113-RED-A
HF115-RED
HF115-RED-A
Price
1.50
3.99
1.99
7.99
2.50
10.99
3.99
14.99
1.50
3.99
1.99
7.99
2.50
10.99
3.99
14.99
1.50
3.99
1.99
7.99
2.50
10.99
3.99
14.99
1.50
3.99
1.99
7.99
2.50
10.99
3.99
14.99
1.50
3.99
1.99
7.99
2.50
10.99
3.99
14.99
Color Size Description
Yellow
20/Bag
4"
100/Bag
20/Bag
8"
100/Bag
20/Bag
11"
100/Bag
20/Bag
15"
100/Bag
Orange
20/Bag
4”
100/Bag
20/Bag
8”
100/Bag
20/Bag
11”
100/Bag
20/Bag
15”
100/Bag
Purple
20/Bag
4”
100/Bag
20/Bag
8”
100/Bag
20/Bag
11"
100/Bag
20/Bag
15”
100/Bag
Fluor.
20/Bag
4”
Green
100/Bag
20/Bag
8”
100/Bag
20/Bag
11”
100/Bag
20/Bag
15”
100/Bag
Fluor.
20/Bag
4”
Yellow
100/Bag
20/Bag
8”
100/Bag
20/Bag
11”
100/Bag
20/Bag
15”
100/Bag
Part #
HF101-YEL
HF101-YEL-A
HF111-YEL
HF111-YEL-A
HF113-YEL
HF113-YEL-A
HF115-YEL
HF115-YEL-A
HF101-ORG
HF101-ORG-A
HF111-ORG
HF111-ORG-A
HF113-ORG
HF113-ORG-A
HF115-ORG
HF115-ORG-A
HF101-PUR
HF101-PUR-A
HF111-PUR
HF111-PUR-A
HF113-PUR
HF113-PUR-A
HF115-PUR
HF115-PUR-A
HF101-FGN
HF101-FGN-A
HF111-FGN
HF111-FGN-A
HF113-FGN
HF113-FGN-A
HF115-FGN
HF115-FGN-A
HF101-FYL
HF101-FYL-A
HF111-FYL
HF111-FYL-A
HF113-FYL
HF113-FYL-A
HF115-FYL
HF115-FYL-A
Price
1.50
3.99
1.99
7.99
2.50
10.99
3.99
14.99
1.50
3.99
1.99
7.99
2.50
10.99
3.99
14.99
1.50
3.99
1.99
7.99
2.50
10.99
3.99
14.99
1.50
3.99
1.99
7.99
2.50
10.99
3.99
14.99
1.50
3.99
1.99
7.99
2.50
10.99
3.99
14.99
Page 49

Catalog - RSM Distribution

Transcription

Similar documents

Order Form

Kodierung in der Geburtshilfe - ein Buch mit 7 Siegeln? (pdf, 247 KB

Glazes r - Potterycrafts

spring 2013 - Vapormatic

STORE #5539 COASTLAND CENTER, SPACE J0008 1926