Apollo Price List - Apollo Worktop Installations, South East

Transcription

Apollo Price List - Apollo Worktop Installations, South East
Trade Price List 2013
ED ITI O N 1
WARRANTY
All Apollo® products carry
a 10 Year Manufacturerʼs
Limited Warranty!
www.apolloworktops.com
All prices exclude VAT
CONTENTS
Introduction
3
Apollo® 20mm & 30mm Slab Tech
6-7
Apollo® Magna 6mm solid surface
Apollo® Wood
8-9
Apollo® Quicktops® Granite
12 - 13
Apollo® Quartz
Apollo® Quicktops® Quartz
Apollo® Quicktops® Solid Surface
10 - 11
14 - 15
16 - 17
Apollo® Acrylic Doors
18 - 19
Apollo® Tools
22
Apollo® Care & Maintenance
24
Apollo® Sinks
Apollo® Installation Training
20 - 21
23
Apollo® Price Guide
25 - 26
Apollo® Point of Sale
28
Apollo® Distribution Network
2
4-5
27
Apollo® Magna solid surface is the ideal choice for
the would be laminate worktop buyer who aspires to
something more luxurious, having a multitude of
advantages at a competitive price. Stain, water and
impact resistant, they offer seamless joints with the
added benefit that marks and scratches can be
WARRANTY
simply ʻpolished outʼ. All Apollo® Magna worktops are hygienic, easy to
All Apollo® products carry
a 10 Year Manufacturerʼs
Limited Warranty!
maintain and available in a choice of colours.
Apollo® Slab Tech offers the warm seamless look of
solid surface (with a number of the colours having
the appearance of quartz). Apollo® Slab Tech can be
When it comes to worktops, Apollo is the name!
Apollo® worktops are available in an impressive variety of
materials including solid surface, natural wood, natural granite
and quartz. The trusted Apollo® brand also includes Apollo®
Acrylic Doors and Apollo® Stainless Steel Sinks.
®
The Apollo® product range is available from our national network
of distributors, details of your local distributor can be found on
the reverse of this price list and on the Apollo® website.
Apollo prides itself on providing you, our customer, with fine
workmanship and an impressive product that will enhance the
beauty of your kitchen, bathroom, or even your bedroom.
®
easily installed by a diy enthusiast or kitchen
installer.
Apollo® Slab Tech worktops are hygienic, easy to maintain and are
available in NEW 20mm & 30mm thicknesses.
NEW
Solid natural wood has never been more popular
than it is today. The result of our treatment process
is a superior finish, which not only looks and feels
wonderful, with a silky smooth finish, but is easy to
clean and maintain.
FSC chain of custody certification
SW-COC-000984 applies to a number of our
timber products, see wood page for details of
species.
NEW Apollo® Quartz has the look and feel
of granite, but is a consistant solid through
NEW
colour and and at a much more affordable price
than similar quartz worktops. Apollo® Quartz is now
also available in concrete finish and the recently
introduced stunning metallica collection.
Apollo® Quicktops® are a new innovation in luxury
worktops. They are available in 40mm thicknesses
in granite, quartz and solid surface. Apollo®
Installation
Any fears about being able to install Apollo worktops should be
quickly dispelled, as installation is relatively easy for either a
competent DIY specialist or a recognised kitchen installer to
undertake.
®
An installation video is available to download which gives full
instructions of how to install all Apollo® worktops and in addition
to this, free installation training courses are also available. We
strongly recommend that all installers attend a training course,
details can be obtained from your distributor.
FIRA
Many Apollo products are tested for durability of
®
finish by the furniture industry research
association.
Please see product pages for details of which
surfaces are covered.
Quicktops® offer the combination of strength,
durability, functionality and beauty, at an affordable
price. Apollo® Quicktops® offer an excellent selection
of colours, including the stunning metallica quartz collection.
Apollo® Acrylic Doors are a range of 100% 18mm
thick, solid acrylic, high gloss doors. Rich, solid and
uniform in colour, apollo® acrylic doors are available
in 22 colours, which offer a sleek, stylish and
contemporary look to your home. Apollo® acrylic is
also available in 4mm thickness for splashbacks,
cladding and end panels etc.
An affordable, but high quality alternative to other
highly priced sinks available in the market. Apollo
®
stainless steel sinks are available in what are
currently the three most popular configurations.
Apollo® solid surface sinks are available in single
and one and a half bowl configurations. A new addition to the Apollo® range
is the Urban sink, this is available in the Apollo® worktop colour of your
choice, to blend seamlessly into your worktop.
For further information Tel: 0845 618 9945 sales@apolloworktops.com www.apolloworktops.com
3
Introduction to Apollo® Magna
Apollo® Magna Solid Surface is a 6mm solid through coloured mineral
material, with an acrylic polyester resin pigment base on chipboard
core with 1mm laminate balancer to underside.
Apollo® Magna solid surfaces are the ideal choice for the would be
laminate worktop buyer, who aspires to something more luxurious.
Apollo Magna worktops have a multitude of advantages over laminate
®
6mm
41mm
and are extremely competitively priced.
Aesthetics
• 6mm solid through coloured mineral material, with an acrylic
polyester resin pigment base on a chipboard core with 1mm
laminate balancer to the underside
34mm chipboard core
1mm full laminate balancer
• Warm and inviting to touch, takes on the ambient room temperature
• The same look and feel as 12mm solid surface worktops
• Seamless joints, homogeneous
• Excellent impact and stain resistance
Please Note:
Dark, heavily pigmented colours will show scratches, dust
and ordinary wear and tear more readily than light or
textured colours and should not be used in high traffic
areas.
• Non-porous, naturally resistant to mould, bacteria and mildew
• Easy to clean and maintain
• Scratches and marks can be polished out
• Option of integrated solid surface sinks
≈ These colours require a disclaimer form to be
completed prior to worktops being manufactured
• Edged with downturn on 3 sides
• Trade up from laminate
‡
• Available in the following 10 worktop colours
Black Velvet is now manufactured in Acrylic and no
longer requires a disclaimer form
ICE WHITE
CREAM
FROST
VELLUM
PEBBLE
GRAVEL GREY
MOON ROCK
DARK CHOCOLATE≈
CHARCOAL
BLACK VELVET‡
4
For further information Tel: 0845 618 9945 sales@apolloworktops.com www.apolloworktops.com
Apollo® Magna solid surface - modular blanks
Worktops have downturns to front and both ends
Breakfast Bars to both long sides and one short side
Price includes a single bevel edge detail.
Description
1.8m Worktop
Length Depth Height
1800mm 650mm 41mm
Band 1 Band 2
£234
£262
1.8m Worktop with 11/2 Bowl
Avignon Stainless Steel Sink
1800mm 650mm
£387
3.6m Worktop
3600mm 650mm
41mm
41mm
£427
£478
41mm
£310
£347
3600mm 50mm
£32
£36
600mm
£44
£49
1.8m Worktop with 11/2 Bowl
Auxerre Stainless Steel Sink
1800mm 650mm
1.8m Breakfast Bar
1800mm 900mm
Upstands & Splashbacks
3.6m Upstand
1.8m Splashback
Length
41mm
Depth
1800mm 570mm
0.6m Splashback
Full Sheet
£385
£446
41mm
Breakfast Bar*
£343
£398
1.8m Worktop with 11/2 Bowl 1800mm 650mm
Bowl Solid Surface Sink (white)
750mm
£434
Band 1 Band 2
£81
£90
£144
£161
Endcap 800mm x 40mm for standard worktop
£20
£22
Curved Endcap 1200mm x 40mm for Breakfast Bar
£69
Full Sheet
3660mm 760mm
Other Items
Curved Endcap 900mm x 40mm for standard worktop
Installation Care & Maintenance Kit
Glue Cartridge (80ml) (use in silicone gun with adaptor)
sufficient for 2 site joints (or 12m upstand)
band 1 colours
Frost
Cream
Ice White
Charcoal≈
Pebble
Gravel Grey
use glue colour
Pearl
Vellum
Rhine
£20
Moon Rock
Glacier White
Pearl
£78
£47
use glue colour
Dark Chocolate≈
Black
£64
band 1 colours
Glacier White
White Chocolate
£57
band 2 colours
Black Velvet‡
Sepia
White Chocolate
use glue colour
Black
* Due to the width of this product, there will be an unobtrusive joint
Technical Information
• Any cut edges on a chipboard base material must be sealed with
a chipboard sealer prior to installation
• Apollo® Magna solid surface can expand as much as 1mm/mtr, so
always allow a gap of at least 3mm if for example, worktops are
captive between walls
• Splashbacks and upstands over 100mm high must have a
minimum gap from the face to the rear of the hob:
Electric 50mm, Gas 120mm
• Allow a minimum 50mm from the cutout to the front edge
• Allow a minimum of 120mm between heated cutouts
• Overhangs in excess of 300mm should be supported and the
worktop should be supported every 600mm
• Do not pour boiling hot water directly into solid surface sinks, and
where constant boiling hot water taps are fitted, please ensure
they are not left running directly into solid surface sinks
• Heat producing appliances that sit beneath the worktop, must
have an aluminium foil membrane placed on underside of the
worktop, directly above the appliance
• Ensure that pans used on gas hobs are of correct size
• Hob flanges need to sit on aluminium thermal insulation tape
around the cut-out, to avoid conducting excess heat and causing
cracks in the worktop
• Flush mounted or recessed hobs (including induction hobs) are
not covered under warranty
• Tolerence in Apollo® Magna is ±2mm
• Plastering or tiling should be completed after installation
• Regular use of your Care & Maintenance Kit should ensure that
your worktops always look good
Visit our website for more useful tips, if the answerʼs not there, ask
a question and we will endeavour to answer within 24 hours.
Installation
• Installation is relatively easy, for either a competent DIY
enthusiast or recognised kitchen installer to carry out
• Easy to follow Installation video is available to download at
www.apolloworktops.com
FIRA
Apollo® Magna is tested to BS6222: Part 3
1999 durability of finish for worktops by the
furniture industry research association.
• Free installation training courses are available.
Details can be obtained from your distributor
For further information Tel: 0845 618 9945 sales@apolloworktops.com www.apolloworktops.com
5
Introduction to Apollo® Slab Tech
NEW
NOW ALSO
AVAILABLE
IN 20mm
THICKNESS
Apollo® Slab Tech has become increasingly popular in the marketplace,
with itʼs “chunky good looks” and unlike many other solid surface
worktops, Apollo® Slab Tech is a “solid 20mm or 30mm” and has no
MDF or chipboard sub structure!
Aesthetics
• A silky smooth solid 20mm or 30mm through coloured surface
20/30MM
• Certain colours have the highly desirable appearance of quartz
• Warm and inviting to touch, takes on the ambient room temperature
• Seamless joints, homogeneous
• Non-porous material - naturally resistant to mould, bacteria and
mildew
• Option of integrated solid surface sinks (white) or Urban sinks
• Water, chemical and impact resistant
• Scratches and marks can be polished out
• Absorbs every day knocks, whereas laminate and other similar
products could be damaged beyond repair
ICE WHITE
SNOW FLAKE
POLAR WHITE
CRUSHED COTTON
KALAHARI
SEA MIST
MOCHA≈
BLACK ROSE≈
≈ Please Note:
Dark, heavily pigmented colours will show
scratches, dust and ordinary wear and tear more
readily than light or textured colours and should
not be used in high traffic areas.
BLACK VELVET≈
6
These colours require a disclaimer form to be
completed prior to worktops being manufactured
For further information Tel: 0845 618 9945 sales@apolloworktops.com www.apolloworktops.com
NEW
NOW ALSO
AVAILABLE
IN 20mm
THICKNESS
Apollo® Slab Tech - modular blanks
Worktops have finished edge to front and both ends, Breakfast Bars to
both long sides and one short side
*Price includes square edge detail - all colours (ariss removed).
Description
Length
1.21m Worktop
2.5m Worktop
2.5m Sinktop with 11/2 Bowl
Solid Surface Sink (white)
Depth
1210mm
2500mm
11/2
2000mm
50mm Square Upstand
3000mm
Splashback
3000mm
Upstands/Splashbacks
Splashback
Full Sheet
Other Items
Glue Cartridge
Depth
900mm
Depth
50mm
20mm
£485
600mm
750mm
20mm
3050mm
570mm
Thickness
760mm
20mm
625mm
£240
£517
£783
£542
£542
30mm
£620
30mm
£46
20mm
20mm
Depth
30mm
Thickness Price
100mm
2500mm
Full Sheet
£438
3000mm
Length
Full Sheet
£438
625mm
Length
100mm Square Upstand
£633
625mm
Length
2m Breakfast Bar
£407
625mm
2500mm
2.5m Sinktop with Apollo® 11/2
2500mm
Bowl Auxerre S/Steel Sink Cutout†
Breakfast Bar
£214
625mm
2.5m Sinktop with Apollo
2500mm
Bowl Avignon S/Steel Sink Cutout†
®
20mm
625mm
20mm
Price
£76
£349
£116
(1 - 9)
£374
£386
use in silicone gun with adaptor (Sufficient for 2 joints or 12m of upstand)
Installation Care & Maintenance Kit (modular)
colours
Black Velvet
Black Rose
use glue colour
Black
Black
Crushed Cotton
White Chocolate
Kalahari
Rhine
Ice White
Glacier White
colours
Mocha
Polar White
Snow Flake
Sea Mist
Price
(10+)
£349
£360
£20
£47
use glue colour
Sepia
Glacier White
Glacier White
Pearl
† Includes drainer and polished cutout to take Apollo® Avignon/Auxerre one
and half bowl stainless steel sink not included in price.
(please see page 20 for sink costs - please specify handing)
Installation
• Installation is relatively easy for either a competent DIY
enthusiast or recognised kitchen installer to carry out
• Easy to follow Installation video is available to download at
www.apolloworktops.com
• Free installation training courses are available.
Details can be obtained from your distributor
FIRA
Apollo® Slab Tech is tested to BS6222:
Part 3 1999 durability of finish for
worktops by the furniture industry
research association.
The Apollo® Urban sink (60mm internal radius) is unsuitable for waste disposal
U851
Cat No. Description
U851#
Single Bowl
U853#
Half Bowl
U871#
U752#
U853
Large Single Bowl
One & Half Bowl
U871
Length
Width
500mm
413mm
317mm
168mm
317mm
168mm
U752
Depth
Price
413mm
175mm
£432
413mm
352mm
175mm
150mm
£683
352mm
150mm
210mm
£384
£532
The Apollo Urban sink has a stainless steel base and is available in the colour of
your choice to match or co-ordinate with your worksurface.
The top edge detail will be bevel edge unless otherwise stated.
Stainless steel bases can be susceptible to scratching.
There can be a slight variation in colour between sink and worktop.
In order to avoid any colour variance between the top and the bowl, we suggest a
bevel or moulded edge. If this is not specified, we will use our discretion as to which
detail will be used.
# Includes drainer - please add cost of your Urban sink to cost of selected blank and
advise position of the overflow when specifying an apollo® urban sink.
Urban sinks are not available in disclaimer colours
®
Technical Information
• Apollo® Slab Tech can expand as much as 1mm/mtr, so always
allow a gap of at least 3mm if for example, worktops are captive
between walls
• Splashbacks and upstands over 100mm high must have a
minimum gap from the face to the rear of the hob:
Electric 50mm, Gas 120mm
• Allow a minimum 50mm from the cutout to the front edge
• Allow minimum 120mm between heated cutouts
• Overhangs in excess of 300mm should be supported and the
worktops should be supported every 600mm
• Do not pour boiling hot water directly into solid surface sinks, and
where constant boiling hot water taps are fitted, please ensure
they are not left running directly into solid surface sinks
• Heat producing appliances that sit beneath the worktop, must
have an aluminium foil membrane placed on the underside of the
worktop, directly above the appliance.
• Ensure that pans used on gas hobs are of correct size
• Hob flanges need to sit on aluminium thermal insulation tape around
the cut-out to avoid conducting too much heat and causing cracks in
the worktop
• Flush mounted, recessed hobs (including induction hobs) are not
covered under warranty
• Tolerance in Apollo® Slab Tech is ±2mm
• Although Apollo® Slab Tech has seamless and unobtrusive joints,
in certain lights, joints maybe slightly visible
• Plastering or tiling should be completed after installation
• Regular use of your Care & Maintenance Kit should ensure that
your worktops always look good
Visit our website for more useful tips, if the answerʼs not there, ask
a question and we will endeavour to answer within 24 hours.
For further information Tel: 0845 618 9945 sales@apolloworktops.com www.apolloworktops.com
7
Introduction to Apollo® Wood
Wood is the original kitchen worktop material and is becoming
increasingly popular in the marketplace, not only for its looks but for its
longevity. Contrary to popular myths wood is also environmentally
friendly.
Aesthetics
• Various thicknesses available
• Silky smooth finish
• Ideal for food preparation areas
40MM
• FSC Chain of Custody Certification SW-COC-000984 applies to our
60mm timber products
• A blend of warmth, character, and tenderness that no other material,
natural or man-made, can match
• A wood worktop mellows with age to enhance its looks still further
STANDARD 40MM THICKNESS HARDWOOD
(40mm Staves)
• Excellent impact resistance
• Scratches and marks can be polished out
• A specially formulated wax oil is available exclusively for Apollo® wood
MAPLE#
COUNTRY BEECH*#f sc
CHERRY#
OAK*#f sc
IROKO#
SAPELLI*f sc
TEAK
TIGER WALNUT
EUROPEAN WALNUT*#f sc
WENGE#
* Available in 60mm thickness (40mm staves)
# Available in 27mm thickness and 27mm staves
f sc
FSC certified in 60mm
8
For further information Tel: 0845 618 9945 sales@apolloworktops.com www.apolloworktops.com
Apollo® Wood worktop blanks 40mm
(38/40mm thick)
band species
1
2
3000mm 3000mm 4000mm
x640mm x900mm x640mm
£175
Beech
Iroko
3
Tiger Walnut
5
Maple
4
6
7
8
9
10
Oak
£391
£399
£430
Teak
£618
Wenge
£363
£283
£374
Euro Walnut
£370
£396
£268
£292
Cherry
£233
£287
£306
Sapelli
£238
£423
£389
£384
£416
£403
£396
£553
£544
£518
£597
£862
£509
£588
£849
(240grit finish)
4000mm
x900mm
3000mm
Upstands*
£525
£13
£519
£12
£315
£9
£491
£12
£562
£13
£535
£13
£688
£15
£735
£16
£794
£17
£1147
£23
Apollo® Wood worktops 27mm blanks
band
1
2
species
3000mm x 640mm
3000mm
Upstands*
£185
£10
£142
Beech
Iroko
£227
7
Cherry
£236
£12
Wenge
£396
£20
8
10
£169
Maple
European Walnut
£9
£238
• Hob flange needs to sit on aluminium thermal insulation tape around
the cut-out to avoid conducting too much heat and causing cracks in
the worktop
£12
1.
4.
6.
9.
3000mm
x 640mm
3000mm
Upstands*
Oak
£493
£20
Walnut
£675
£26
£286
Beech
£509
Sapelli
Other Items
• Tolerance on bespoke wood ±2mm on blanks ±5mm
• Plastering or tiling should be completed after installation
• If wood worktops are to be stored prior to installation they should
always be stored at room temperature away from all sources of
heat and moisture, on a sound level surface horizontally with a
minimum of three timber battens equally spaced in between each
worktop
£13
£21
Installation/Care & Maintenance Kit
£75
Ultra Fresh Mousse
£6
Ultra Fresh Oil (375ml)
* Upstands are available up to 200mm high
• Upstands over 100mm high must have a minimum gap from the
face to the rear of the hob:
Electric 50mm, Gas 120mm
• Allow a minimum 50mm from the cutout to the front edge
• Allow minimum 120mm between heated cutouts
• Allow minimum 100mm between sink cutouts
• Ensure that pans used on gas hobs are of correct size
Apollo® Wood worktops 60mm blanks
band species
• Upstands should be fixed to the wall and NOT to the worktop.
There should be a 3mm gap between the worksurface and
upstand, the only connection between upstand and worktops
should be silicone sealant, allowing the natural movement of your
worktop
• Heat producing appliances that sit beneath the worktop must have
an aluminium foil membrane placed on the underside of the
worktop directly above the appliance
£11
Oak
5
• Worktops can expand as much as 1mm/mtr, so always allow a gap
of at least 3mm between the worktop and the wall if for example,
worktops are captive between walls
• Overhangs in excess of 300mm should be supported and the
worktops should be supported every 600mm
£8
4
Technical Information
• Our hardwood worktops are constructed from 40mm thick finger
jointed pieces of kiln dried timber
£9
(in increments of 40mm - price listed is for 40mm high)
• Never store in a garage or an unfinished building and always install
within 7 days of delivery
• Oil regularly in the first couple of weeks after installation to avoid
the worktops drying out
• Regular use of your Care & Maintenance Kit should ensure that
your worktops always look good
Although we will endeavour to supply product as close as possible
to the sample in-store, variations in colour can occur. Please contact
us for samples of current stock as we cannot accept responsibility
for differences between samples and stock once your worksurface
has been manufactured
Installation
• Installation is relatively easy for either a competent DIY
enthusiast or recognised kitchen installer to carry out
• An easy to follow Installation video is available to download at
www.apolloworktops.com
• Free installation training courses are available.
Details can be obtained from your distributor
For further information Tel: 0845 618 9945 sales@apolloworktops.com www.apolloworktops.com
9
NEW
Apollo® Quartz solid 20mm
modular worktops
Solid 20mm thick (worktop price includes double bevel edge
15/20/30/40mm
detail to front and both ends, Breakfast Bars to two long sides
and one short, Islands to all four sides)
Worktops 20mm thick
Length
2.2m Worktop
2200mm 625mm £382
1.04m Worktop
2.8m Worktop
• Apollo® Quartz worktops are a popular choice for today's
kitchen being a durable, designer-friendly option when
remodelling a kitchen, the selection of colours includes a
number of vibrant hues not available in natural materials such
as granite
• Beautiful crystalline appearance - made from 93% quartz
crystals and polymer resin
• Apollo® Quartz worktops do not need polishing or sealing
• Apollo® Quartz worktops are uniform in colour and pattern
• Non-porous, naturally resistant to mould, bacteria and mildew
• Stain and heat resistant
• Tested to FIRA Industry Standards
Apollo® Quartz colours are categorised in 3 bands, as listed
below.
COLOUR BANDING
Band 1
Brown Patina, Carbon Black†, Cocoa, Cosmic Blackø, Pale Sand†
Band 2
Argyll Mist, Astro Black†ø§, Bluebellø§, Cappuccino, Desert Crystalø§, Grampian
Beige≠, Mezzanine Grey§, Palma Brownø§ , Praline, Sapphire Blue§, Silver Dust◊§,
Scottish Rose§, Seascape†ø§, Steel†ø§
Metallica (band 2)
›
›
,
Chromiumø , Iridiumø , Strontiumø
Concrete Range (2)#
›
›
Tungstenø , Titaniumø ,
Chiffon White, Hazelnutø, Oyster Greyø, Portland Grey, Sand Beigeø
Band 3
Ciele Noir NEW, Lyskam NEW
≠ PLEASE NOTE Limited stock of these colours is available,
please see Offer Leaflet or www.apolloworktops.com
# Concrete colours require more maintenance
†
Available in 40mm thickness.
ø Available in 15mm thickness
§ contains mirror fleck
10
◊ Available in 15mm thickness only
›contains chrome flakes
Depth
MODULAR
SOLID 20mm
APOLLO®
QUARTZ
Band 1 Band 2 Band 3
1040mm 625mm £220
£228
2800mm 625mm £497
£521
£400
£262
£460
£599
2.2m Worktop/Avignon sink cutout†
2.2m Worktop/Auxerre sink cutout†
2200mm 625mm £571
Length
Depth
Band 1 Band 2 Band 3
Island Units 20mm thick
Length
Depth
Band1 Band 2 Band 3
Other Items 20mm thick
Length
Depth
Band 1 Band 2 Band 3
Splashback
600mm
750mm £109
Breakfast Bars 20mm thick
2m Breakfast Bar
1.86m Island Unit
Upstand
2200mm 625mm £649
Installation Care & Maintenance Kit
£666
£676
£766
2000mm 900mm £504
£528
£607
1860mm 1200mm £733
£762
£876
£78
£90
£266
£306
2000mm 50mm
Splashback
£588
£75
2000mm 570mm £240
£120
£138
£53
† Includes drainer and polished cutout to take Apollo® Avignon/Auxerre
one and half bowl stainless steel sink (stainless steel sink not included in this price, please see
page 20 for sink cost - please specify handing).
Apollo® Quartz worktops
Price per linear metre (price includes double bevel edge detail worktop
price includes double bevel edge detail to front and both ends)
Depth
300mm
400mm
500mm
600mm
700mm
800mm
900mm
1000mm
1100mm
1200mm
Thickness/Banding
15/20mm
30mm
40mm
Band 1 Band 2 Band 3 Band 1 Band 2 Band 3 Band 1 Band 2 Band 3
£92
£114
£136
£157
£177
£198
£219
£240
£263
£283
£100
£124
£150
£171
£193
£218
£241
£266
£288
£312
£115
£143
£173
£197
£222
£251
£277
£306
£331
£359
£112
£138
£164
£189
£217
£242
£269
£295
£322
£345
Typical slab size is 2950mm x 1350mm
£120
£148
£178
£209
£238
£269
£296
£326
£357
£386
£138
£170
£205
£241
£274
£310
£341
£375
£411
£444
£137
£168
£201
£231
£265
£296
£329
£360
£393
£421
£147
£182
£218
£254
£290
£327
£361
£397
£435
£471
-
-
-
-
-
-
-
-
-
-
Deeper Downturns
The very latest in manufacturing technology enables us to offer a
worktop with a downturn of 60 - 100mm. To calculate the cost,
take the base worktop price and add £144 per linear metre
(straight runs only)
Visit our website www.apolloworktops.com for more useful tips. If the answer
is not there, ask a question and we will endeavour to answer within 24 hours.
For further information Tel: 0845 618 9945 sales@apolloworktops.com www.apolloworktops.com
LUXURY FOR LESS
Return Ends
15/20mm
30mm
20+20/40mm
External Splay
£38
£40
£71
£17
Full/Part Return
£19
£53
Internal Splay
£55
£82
Break Front
£77
Single Radius
£162
£245
£79
£139
£161
Triple Notch
£46
£48
£28
£30
£178
Curved
£203
£39
Scribed Joint
£96
£85
Double Radius
Double Notch
£40
£39
Legs/End Panels (cost of material per sq. mtr plus butt joint cost)
£137
£33
£50
£301
£39
Standard Butt (5mm overhang) cost of material plus
£150
Flush Butt cost of material plus
£150
Mitred Butt cost of material plus
Edge Detail (per linear metre)
Double Bevel
15/20mm
30mm
20+20/40mm
£16
£17
£123
£58
£167
£28
Single Pencil
Full BullnoseΩ
£57+
Single OvoloΩ
£96+
ImperialΩ
Birds Beak
£32
£96+
£104
-
-
£104
-
MilanoΩ
VenetianΩ
Underside Polish
Underside Polish
(cost per sq. mtr)
Unpolished
15/20mm
Square Polished
††
Recessed Hob†*
-
-
(50mm only)
Sink/Hob Cutouts
Polished Belfast
£30
£31
Double Pencil
Polished
£150
£84
-
£30
£140
30mm
20+20mm
£214
£193
£90
£193
£379
£84
£419
£164
£379
£175
£466
Upstands / Cladding (15/20mm thick)
60mm Upstand (per linear mtr)
£251
£466
£466
Band 1
£40
£49
100mm Upstand (per linear mtr)
£240
Cladding (per sq. mtr)
Drainers (1-5mm gradient unless stated) & Tap Holes
5 Groove Drainer
3mm Recessed Drainer (flat)∆
Other Items
Pan Rests (per set of 6)
Care & Maintenance Kit
£230
£378
brass £213
£94
£142
£200
£200
£113
£188
£355≈
£30
£140
30+30mm
£90
£214
£419
£272
£466
Band 2
£42
£51
£266
5 Groove Angled Drainer £378
Tap Hole
£14
stainless steel £180
£27
Requires scribed joint
≈ Venetian edge detail is only available in 30+30mm
+ Not available in 15mm
∆
Recessed drainers on Apollo® Quartz are slightly dull and may be patchy
Ω
Flush mounted or recessed hob cut outs (other than induction hobs) are
not covered under the 10 year warranty
††
Please specify if the sink has square corners (less than 15mm radius)
* Requires a 2mm bevel edge
†
Important points to note
• Worktops can expand as much as 1mm/mtr, so always allow a
gap of at least 3mm, where worktops are captive between walls
• Overhangs in excess of 300mm need support
• Should be supported every 600mm
• Allow a minimum of 50mm from the cutout to the front edge,
50mm from the back edge and 120mm between two hob cutouts
• Splashbacks and upstands over 100mm high must have a
minimum gap from the face to the rear of the hob:
Electric 50mm, Gas 120mm
• Plastering or tiling should be completed after installation.
• Drainer grooves may have a slightly duller appearance than the
worktop
• Tolerance in Apollo® Quartz ±2mm
Important - please note
• Engineered stone is manufactured in batch processes and
includes naturally occurring components. Some colours have
different levels of pigmentation and/or particle distribution. This
may lead to variation in the appearance of the worktop and is not
a product fault.
• Plain colours are prone to contamination (e.g. light colours show
small dark spots while darker colours may appear patchy with
lighter spots) and occasional contrasting coloured stone chips can
be expected in material of natural origin; these are not defects in
the material.
• Where mirror reflectors form part of the matrix of the worktop their
distribution and orientation will be random; it is not possible for all
mirrored flecks to be facing the surface; where surface mirror
flecks become detached these may sometimes be repaired using
a resin filler, this is not a product fault.
• Apollo® Quartz is vibrated to remove air trapped during
manufacture and it is common to find very small air holes in the
surface of all colours, these are inherent in the manufacturing
process of engineered stone and are not considered as
defects.
This process is industry standard and does not affect your warranty.
We endeavour to produce your worktops without voids or airholes,
inevitably this is not always practically possible.
For further information Tel: 0845 618 9945 sales@apolloworktops.com www.apolloworktops.com
11
Introduction to Apollo® QuicktopsTM Granite
Granite is a natural substance and no two pieces of granite ever look
exactly alike, giving it an individuality that no man made product can
boast. The composition of minerals and the deposit it was quarried
from, all play a part in the appearance of granite.
Granite is a coarse grained, crystalline igneous rock primarily
composed of Quartz and Feldspar. It forms from slowly cooling
magma that is subjected to extreme pressures deep beneath the
earthʼs surface.
40MM
Aesthetics
• Apollo® Quicktops Granite is manufactured from 15/20mm thick
Granite sat on moisture resistant MDF support rails with a 'v' grooved
downturn giving the illusion of a solid 40mmthick worktop
• Quicktops® Granite is an ideal material for kitchen worksurfaces with
its naturally beautiful and diverse patterns.
• One of the hardest materials on earth
Revolutionary “V” Groove method
• Edged with downturn on three sides (Islands all four sides)
• Timeless beauty
• Easy to clean and maintain
• Scratch and heat resistant
• Extremely hard wearing
WHITE DIAMOND∆
GIALLO VENEZIANO∆
BLUE PEARL
EMERALD PEARL
BALTIC BROWN∆
TAN BROWN
SPICE BLACK
EMERALD BLACK
BON ACCORD
STAR GALAXY
NERO ABSOLUTO‡
∆ 20mm thick material
‡ Previously called African Black
12
For further information Tel: 0845 618 9945 sales@apolloworktops.com www.apolloworktops.com
3300mm 3 pce Polished Belfast Worktop** 3300mm 625mm 40mm
2200mm Worktop with Avignon cutout† 2200mm 625mm 40mm
2200mm Worktop with Auxerre cutout† 2200mm 625mm 40mm
Breakfast Bars (edged 3 sides)
2000mm Breakfast Bar
2600mm Breakfast Bar
Island Units (edged all 4 sides)
1860m Island Unit (edged all round)
1570m Island Unit (edged all round)
Other Items
£573
£501
1860mm 1200mm 40mm
£643
1570mm 970mm 40mm
-
£535
£33
£567
£427
£594
-
£622
£230
£412
£496
£681
£232
£496
£453
£463
£417
-
£688
£270
£599
£805
£249
£543
£741
£254
-
£756
Emerald Pearl
£575
£547
£440
2600mm 660mm 40mm
£529
£528
£285
-
£854
£285
£633
£854
£499
£517
£536
£575
£580
£659
£616
£626
£691
£691
£453
£477
£501
£553
£559
£662
£605
£619
£704
£704
-
£649
£558
£33
£570
£465
£679
£580
£34
£587
-
£709
£569
£35
£626
£537
£773
£647
£38
£631
-
£780
£652
£39
£772
£642
£836
£730
£45
£725
£587
£838
£608
£41
£736
-
£854
£705
£42
£808
-
£960
£790
£47
£808
£682
£960
£647
£47
950mm 15/20mm 20/25mm
£16
£16
£16
£17
£18
£18
£19
£18
£19
£20
£20
600mm 15/20mm 750mm
£86
£88
£95
£101
£113
£115
£140
£127
£129
£151
£151
Cill
2000mm 250mm 15/10mm
Splashback
2000mm 15/20mm 500mm
Splashback
-
2000mm 900mm 40mm
2000mm 15/20mm 50mm
Upstand
Return End cap
-
£373
Blue Pearl
2600mm 625mm 40mm
£212
Giallo Veneziano∆
£355
£203
Nero Absoluto
£336
£194
Star Galaxy
2600mm Worktop
£323
£191
Tan Brown
2200mm 625mm 40mm
Height
Emerald Black
2200mm Worktop
Width
1040mm 625mm 40mm
Baltic Brown∆
Length
1040mm Worktop
Bon Accord
Worktops (edged 3 sides)
White Diamond∆
Worktops have downturns to front and both ends, Breakfast Bars to
both long sides and one short side, Islands downturns to all four sides.
(price also includes single bevel edge detail)
Spice Black∆
Apollo® Quicktops® Granite
£102
£169
£105
£176
Installation Care & Maintenance Kit
£47
† Includes drainer and polished cutout to take Apollo® Avignon/Auxerre
One and Half Bowl Stainless Steel Sink not included.
(please see page 20 for sink cost - please specify handing).
∆ 20mm thick material
** Includes polished cutout and two sets of drainer grooves
§ Adoptor supplied with cartridge
Technical Information
• Apollo® Quicktops® worktops can expand as much as 1mm/mtr, so
always allow a gap of at least 3mm if for example, worktops are
captive between walls
• End overhangs over 300mm need support
• Should be supported every 600mm
• Allow a minimum 50mm from the cutout to the front edge, 50mm
from the back edge and 120mm between two hob cutouts
• Splashbacks and upstands over 100mm high must have a
minimum gap from the face to the rear of the hob:
Electric 50mm, Gas 120mm
• Plastering or tiling should be completed after installation
• Hob flange needs to sit on aluminium thermal insulation tape
around the cut-out, to avoid conducting too much heat and
causing cracks in the worktop
• Heat producing appliances that sit beneath the worktop, must
have an aluminium foil membrane placed on the underside of
the worktop
• Aluminum foil deflects heat and moisture; preventing heat damage
to the worktop
£111
£190
£118
£203
£132
£232
£134
£235
£163
£292
£147
£261
£151
£268
£174
£316
£174
£316
Stone Bonder Glue Cartridge (80ml) (specially formulated epoxy/acrylic glue £20
-use in silicone gun with adaptor§) this is required when fitting new endcap
Worktop Colour
Nero Absoluto
Emerald Pearl
Glue Colour
Black
Black
Baltic Brown/Tan Brown Black
Blue Pearl
Star Galaxy
Black
Black
Worktop Colour
Glue Colour
Emerald Black
Black
Bon Accord
Spice Black
Giallo Veneziano
White Diamond
Black
Black
Chameleon
Chameleon
• Drainer grooves may have a slightly duller appearance than the
worktop
• As granite is a natural stone, pitting and veining will occur in
Important - please note
random distribution of swirls, subtle variations in shade or
areas of contrast will also appear within the body of the
worksurface and are all common within granite resulting in itsʼ
unique appearance, this is not a product fault
• Some level of what could be referred to as spots or blotches
are inherent in the material. Small fissures are a common
feature in any granite and these natural flaws were present at
the rock formation, this is not a product fault
• Being a natural material, Quicktops
®
Granite does require
sealing every 6 months* and, being a porous material, will
absorb the spillage and is likely to stain unless wiped away
immediately
• Although Apollo® Quicktops Granite is a natural product itʼs
•
still delivered in ʻbatchesʼ to aid colour matching
Colour match cannot be guaranteed for aditional orders
For further information Tel: 0845 618 9945 sales@apolloworktops.com www.apolloworktops.com
13
Introduction to Apollo® Quicktops® Quartz
Apollo® Quicktops® Quartz is a 15mm solid, through coloured
engineered stone, with each piece of quartz matching the next one
in the same batch.
40MM
Apollo® Quicktops® Quartz keeps its lustrous gloss and ultra smooth
surface without polishing.
Aesthetics
• Solid 15mm quartz on moisture resistant MDF sub-frame giving the
appearance of a solid 40mm quartz worktop
• Looks and feels like granite
• Downturn on three sides (islands all four sides)
• Beautiful crystaline appearance - made from 93% quartz crystals and
polymer resin
• Non-porous material - naturally resistant to mould, bacteria and mildew
• Scratch resistant - one of the hardest substances on earth
Revolutionary “V” Groove method
• Doesnʼt need sealing
• Easy to clean and maintain - ideal for kitchen worktops
ANGEL WHITE§
CREAM PEARL
DESERT CRYSTAL§
SILVER DUST§
CONCRETE GREY#
SAND BEIGE
SEASCAPE§
BLUEBELL §
CLAY BROWN#
PALMA BROWN§
COSMIC BLACK
ONYX BLACK§
IRIDIUM›
STRONTIUM›
TUNGSTEN›
TITANTIUM›
Apollo Quartz Metallica
CHROMIUM›
14
# Concrete colours require more
maintenance
§ Contains mirror flecks
› Contains chrome flakes
Apollo® Quicktops Quartz - 15/20mm
material subject to availability
FIRA
Apollo® Quicktops® Quartz is tested to BS6222:
Part 3 1999 durability of finish for worktops by
the furniture industry research association.
For further information Tel: 0845 618 9945 sales@apolloworktops.com www.apolloworktops.com
Important - please note
Apollo® Quicktops® Quartz
Worktops have downturns to front and both ends, Breakfast Bars to both long sides
and one short side, Islands downturns to all four sides.
(price also includes single bevel edge detail)
Worktops 40mm thick (edged 3 sides) Length
Width
Band 1 Band 2 Band 3
1040mm 625mm £188
1040mm Worktop
2200mm 625mm £327
2200mm Worktop
2800mm Worktop
2800mm 625mm £426
3300mm 625mm £546
2200mm Worktop/Avignon sink cutout† 2200mm 625mm £489
2200mm Worktop/Auxerre sink cutout† 2200mm 625mm £545
3300mm 3 piece Belfast Worktop**
£194
£339
£195
£343
£441
£446
£501
£506
£563
£569
£557
£560
2000mm Breakfast Bar (edged 3 sides) 2000mm 900mm £433
£448
£454
1860mm 1200mm £628
£648
£653
£34
£34
£102
£103
Breakfast Bars 40mm thick
2800mm Breakfast Bar (edged 3 sides) 2800mm 660mm £456
Island Units 40mm thick
1860m Island Unit (edged all round)
1570m Island Unit (edged all round)
1570mm 970mm £509
Upstand
2000mm 50mm
Other Items (15/20mm thick)
Return End cap
Length
Height
950mm
25mm
600mm
750mm £86
£33
£16
2000mm 250mm £98
Cill
Splashback
Splashback
Installation Care & Maintenance Kit
2000mm 500mm £170
£471
£522
£17
£87
£172
Stone Bonder Glue Cartridge (80ml) (specially formulated epoxy/acrylic glue
-use in silicone gun with adaptor) this is required when fitting new endcap
£477
£526
£17
£87
£172
£47
£20
• Engineered stone is manufactured in batch processes and
includes naturally occurring components. Some colours have
different levels of pigmentation and/or particle distribution. This
may lead to variation in the appearance of the worktop and is not
a product fault.
• Plain colours are prone to contamination (e.g. light colours show
small dark spots while darker colours may appear patchy with
lighter spots) and occasional contrasting coloured stone chips can
be expected in material of natural origin; these are not defects in
the material.
• Where mirror reflectors form part of the matrix of the worktop their
distribution and orientation will be random; it is not possible for all
mirrored flecks to be facing the surface; where surface mirror
flecks become detached these may sometimes be repaired using
a resin filler, this is not a product fault.
• Apollo® Quartz is vibrated to remove air trapped during
manufacture and it is common to find very small air holes in the
surface of all colours, these are inherent in the manufacturing
process of engineered stone and are not considered as
defects.
This process is industry standard and does not affect your warranty.
We endeavour to produce your worktops without voids or airholes,
inevitably this is not always practically possible.
† Includes drainer and polished cutout to take Apollo® Avignon/Auxerre One
and Half Bowl Stainless Steel Sink not included.
** Includes polished cut out and two sets of drainer grooves.
(please see page 20 for sink cost - please specify handing).
Technical Information
• Apollo® Quicktops® worktops can expand as much as 1mm/mtr,
so always allow a gap of at least 3mm if for example, worktops
are captive between walls
• Overhangs in excess of 300mm need support
• Should be supported every 600mm
• Allow a minimum of 50mm from the cutout to the front edge,
50mm from the back edge and 120mm between two hob cutouts
• Splash backs over 100mm high must have a minimum gap at the
rear of the hob to the face of:
Electric 50mm, Gas 120mm
• Plastering or tiling should ideally be completed after installation.
• Hob flange needs to sit on aluminium thermal insulation tape
around the cut-out, to avoid conducting too much heat and
causing cracks in the worktop
• Drainer grooves may have a slightly duller appearance than
the worktop
• Tolerence in Quicktop® Quartz ±2mm
• If you have heat-producing appliances, such as a dishwasher,
washer or cooker beneath your worktop, you must place a
aluminum foil membrane on the underside of the worktop.
• Aluminum foil deflects heat and moisture preventing heat
damage to the worktop
Band 1 Use
Glue Colour
Band 3 (Metallica) Use Glue Colour
Cosmic Black
Black
Iridium›
Oyster
Cream Pearl
Limestone
Strontium›
Black
Band 2 Use
Glue Colour
Tungsten›
Black
Angel White
White
Titanium›
Oyster
Bluebell§
Bluebell
Chromium›
White
Desert Crystal§
Limestone
Band 3 (Concrete) Use Glue Colour
Onyx Black§
Black
Clay Brown
Clay Brown
Palma Brown§
Brown
Concrete Grey
Oyster
Seascape§
Seascape
Sand Beige
Limestone
Silver Dust§
Oyster
For further information Tel: 0845 618 9945 sales@apolloworktops.com www.apolloworktops.com
15
Introduction to Apollo® Quicktops®
Solid Surface
Apollo® Quicktops® Solid Surface is a 12mm solid through coloured
mineral material, with an acrylic polyester resin pigment base.
Apollo® Quicktops® Solid Surfaces offer coved upstands as standard
50MM
(where specified), with seamless joints and integrated sinks with a silky
smooth finish that is warm and inviting to the touch.
38MM
Aesthetics
• Solid 12mm solid surface on MDF sub-frame giving the appearance of
a solid 38mm worktop
• Downturn on three sides (islands all four sides)
• Warm and inviting to touch, takes on the ambient room temperature
• Seamless joints, homogeneous
Coved
upstand
(now also
available
without
upstand)
• Non-porous material - naturally resistant to mould, bacteria and mildew
• Coved upstand option available as standard
Revolutionary “V” Groove method
• Option of integrated solid surface sinks
• Excellent impact resistance
• Scratches and marks can be polished out
FIRA
Apollo® Quicktops® Solid Surface is tested to
BS6222: Part 3 1999 durability of finish for
worktops by the furniture industry research
association.
• Monolithic appearance
ICE WHITE
CREAM
WHITE STAR
OATMEAL
GREY MIST
DOVE
AUTUMN TONE
CHARCOAL
≈ Please Note:
Dark, heavily pigmented colours will show scratches, dust
and ordinary wear and tear more readily than light or
textured colours and should not be used in high traffic areas.
NIGHTFALL ≈
16
BLACK VELVET ≈
These colours require a disclaimer form to be completed
prior to worktops being manufactured
For further information Tel: 0845 618 9945 sales@apolloworktops.com www.apolloworktops.com
Apollo® Quicktops® solid surface
Worktops have a 38mm downturn to the front and both ends, Breakfast Bars to both
long sides and one short side, Islands downturn to all four sides.
(price also includes single bevel edge detail)
Worktops with coved upstand
Length
3.6m Worktop
3600mm 625mm
1.8m Worktop
Width
1800mm 625mm
band 1 band 2 band 3
£304
£322 £372
£536
£572 £641
1.8m Worktop 11/2 sink cut out†
1800mm 625mm
£382
£400 £448
Cornerpiece
650mm
£189
£197 £220
1.8m W/top with 11/2 moulded sink
Worktops without upstand
1800mm 625mm
650mm
£601
£620 £694
1.8m Worktop
1800mm 625mm
£255
£271 £304
1.8m Worktop 11/2 sink cut out†
1800mm 625mm
£300
£317 £355
3.6m Breakfast Bar double p/f
3600mm 660mm
£557
£594 £665
3.6m Curved B/Bar curved edge
3600mm 660mm
£613
£649 £727
3.6m Worktop
1.8m W/top with 11/2 moulded sink
Breakfast Bars with coved upstand
1.8m Breakfast Bar double p/f
1.8m Curved B/Bar curved edge
Breakfast Bars without upstand
3600mm 625mm
1800mm 625mm
1800mm 900mm
1800mm 900mm
£463
£503
£447
£478
£497 £557
£520 £582
£471 £528
£503 £563
Technical Information
• Apollo® Quicktops solid surface can expand as much as 1mm/mtr
so always allow a gap of at least 3mm if, for example worktops are
captive between walls
• Splashbacks and upstands over 100mm high must have a
minimum gap from the face to the rear of the hob:
Electric 50mm, Gas 120mm
• Allow a minimum 50mm from the cutout to the front edge
• Allow minimum 120mm between heated cutouts
• Overhangs in excess of 300mm should be supported and
worktops should be supported every 600mm
• Do not pour boiling hot water directly into solid surface sinks, and
where constant boiling hot water taps are fitted please ensure
they are not left running directly into solid surface sinks
• Heat producing appliances that sit beneath the worktop must
have an aluminium foil membrane placed on underside of
worktop directly above the aplliance
• Ensure that pans used on gas hobs are of correct size
3.6m Breakfast Bar double p/f
3600mm 660mm
£503
£539 £604
3.6m Curved B/Bar curved edge
3600mm 660mm
£526
£563 £631
• Hob flanges need to sit on aluminium thermal insulation tape
around the cut-out to avoid conducting too much heat and causing
cracks in the worktop
£596 £668
• Tolerance in Apollo® Quicktops® solid surface is ±2mm
1.8m Breakfast Bar double p/f
1.8m Curved B/Bar curved edge
Island Units (no upstand)
1.86m Island Unit p/f all round
1.57m Island Unit p/f all round
Upstands & Splashbacks
3.6m Upstand (50mm high)
1.8m Splashback (12mm thick)
0.6m Splashback (12mm thick)
Other Items
End Panel (38mm thick)
Return End cap (27mm high)
Installation Care & Maintenance Kit
Glue Cartridge (80ml)
1800mm 900mm
1800mm 900mm
£389
£389
1860mm 1200mm £563
1570mm 970mm
3600mm
12mm
£428
£50
£73
£79
£88
£142
610mm
870mm
£164
950mm
12mm
£433 £485
£45
500mm
750mm
£413 £463
£43
1800mm
600mm
£413 £463
£19
£156 £175
£172 £190
£20
(use in silicone gun with adaptor)
£22
£47
£20
sufficient for 3 site joints (or 12m upstand)
• Flush mounted or recessed hobs are not covered under warranty
• Some colours have different levels of pigmentation (particles). This
may lead to a variation in the aesthetic appearance of the worktop
and is not a product fault
• Plastering or tiling should be completed after installation
• Regular use of your Care & Maintenance Kit should ensure that
your worktops always look good
Visit our website for more useful tips, if the answerʼs not there ask
a question and we will endeavour to answer within 24 hours.
† Includes drainer and polished cutout to take Apollo® one and half bowl
Avignon or Auxerre (please specify) stainless steel sink is not included in
the price.
(please see page 20 for sink costs - please specify handing ).
BAND 1 COLOUR
Autumn Tone
USE GLUE COLOUR
BAND 2 COLOUR
USE GLUE COLOUR
Cream
Sepia
Charcoal
White Chocolate
Jet Black
Nightfall
White Star
Jet Black
Dove
Ice White
Oatmeal
Pearl
Glacier White
Rhine
Grey Mist
BAND 3 COLOUR
Black Velvet
Pearl
Glacier White
USE GLUE COLOUR
Jet Black
For further information Tel: 0845 618 9945 sales@apolloworktops.com www.apolloworktops.com
17
Introduction to Apollo® Acrylic Doors
Apollo® Acrylic Doors offer the latest in fashion trends, with high
gloss the symbol of modernity. With a luxuriously smooth, non-
porous surface, Apollo® Acrylic Doors are hygienic, easy to clean
and maintain, in addition to being both UV light, stain and
moisture resistant.
Aesthetics
• 18mm high gloss, 100% acrylic doors
• Rich, solid and uniform in colour
• Manufactured in 4mm and 18mm thicknesses
• Non-porous material - naturally resistant to mould, bacteria and
mildew.
• Offers a sleek, stylish and contemporary look
FIRA
Apollo® Acrylic Doors are tested to BS6222:
Part 3 1999 durability of finish for worktops
by the Furniture Industry Research
Association.
• Can be thermoformed into curved shapes
• Available in made to measure or standard sizes
Traffic White
(RAL9016)
Signal White
Pure White
(RAL9010)
Grey White
(RAL9002)
Pale Grey
(RAL7035)
French Grey
Vanilla
Cream
(RAL9001)
Light Ivory
(RAL1015)
Stone Grey
Light Blue
(RAL5012)
Cobalt Blue≈
(RAL5013)
Zinc Yellow
(RAL1018)
Bright Orange
(RAL2004)
Red
Chocolate
Brown≈
Anthracite Grey≈
(RAL7016)
Red Brown≈
(RAL3009)
Lime
18
Grey Beige
(RAL1019)
Black Red≈
(RAL3007)
Jet Black≈
(RAL9005)
≈ Please Note:
Dark, heavily pigmented colours
will show scratches, dust and
ordinary wear and tear more
readily than light colours and
should not be used in high traffic
areas.
For further information Tel: 0845 618 9945 sales@apolloworktops.com www.apolloworktops.com
Technical Information
Apollo® Acrylic Doors solid 18mm
• It should be noted that dark, heavily pigmented colours will show
18mm available in bespoke drawer or door sizes (four edge profiles
available as standard, 1mm, 2mm, 3mm and 6mm radius)
To calculate bespoke door costs, please follow the examples below.
COST CALCULATOR (EXAMPLES)
Door Size
(in metres)
0.5 x 0.7m
x price
(per sq. metre)
sub total
(includes standard edge)
= £101.50
x £290
0.4 x 0.6m
0.3 x 0.5m
x £290
= £69.60
0.2 x 0.3m
x £290
= £17.40
colours
Final Cost £
(rounded up)
£102
£70
= £43.50
x £290
scratches, dust and ordinary wear and tear more readily than lighter
£44
£18
Please go to www.apolloworktops.com website to download our easy to
use cost calculator.
Tolerance in Apollo® Arylic Doors is ±2mm
18mm APOLLO® ACRYLIC DOORS
DOOR PULLS (per 100mm)
Straight rear door pull
Rounded facing door pull
£4
£4
Scooped rear door pull
£4
Curving
£120
ADDITIONAL ITEMS
Holes for hinges (per hole)
£4
£4
Cut out for handles
£9
Care & Maintenance Kit
reverse of Apollo® Acrylic Doors, this is not a fault and is inherant
with the manufacturing process.
• Do not use scouring pads or any abrasive material, dust with a soft
cloth only
• Do not use wax-furniture polish, abrasive or aggressive cleaners,
bleach or other hypochlorate (chlorine) based cleaners, multi
• Newly plastered rooms should be left to environmentally stabilise
Rounded rear door pull
Facing straight door pull
• The manufacturing process can result in small air holes on the
products
£129
3070mm x 1020mm x 4mm
• Tolerance in Apollo® Acrylic Doors is ±2mm
• Spills should always be cleaned up immediately using a damp cloth
£656
3000mm x 1140mm x 18mm
they will not fade or lose their high gloss finish
purpose cleaners, dilutes, acetone, alcohol, solvent or similar
Apollo® Acrylic is also available in 18mm thickness at £290 per sqm.
FULL SHEET SIZES
• Apollo® Acrylic Doors are resistant to moisture, stains and UV light,
£4
£20
Please note there is an additional £250 charge for a curved door former per radius
Apollo® Acrylic Doors is a range of high gloss acrylic doors, that is
rich, solid and uniform in colour. Apollo® Acrylic Doors offer a sleek,
stylish and contemporary look to your home. Available in 18mm
thickness, Apollo® Acrylic high gloss doors can be cut into almost
any size and even thermoformed into curves, offering that much
sought after modern look. Apollo® Acrylic is also available in 4mm,
which is ideal for backsplashes, plinths or cladding.
before storage or installation of doors
• Doors are supplied with a protective film on the face which must not
be exposed to direct sunlight. It is recomended that this film is
removed as soon as possible
• For product cleaning, use a 5% soap (liquid soap), 95% water
solution, wiping with a damp cloth and finally drying with a soft
clean cloth
Apollo® Acrylic Doors - typical kitchen layout
F
F
F
F
E
C
C
C
A
B
D
DESCRIPTION
Item/No. Req.
500 x 700mm Base Unit Doors
600 x 700mm Base Unit Doors
500 x 130mm Base Unit Drawers
A3
B1
C3
500 x 300mm Base Unit Drawers
D1
600 x 1200mm Larder Unit Door
E1
500 x 700mm Wall Unit Doors
F4
A
A
Cost
sub total
£122
£330
£44
£44
£102
£19
£102
£209
GRAND TOTAL
£306
£57
£408
£209
£1354
For further information Tel: 0845 618 9945 sales@apolloworktops.com www.apolloworktops.com
TRADE
19
Introduction to Apollo® Stainless Steel Sinks
A new member of the Apollo® family of products, our stainless steel
stainless steel sinks
sinks are a perfect addition to any of our Apollo® Worktop products.
Cat No.
cast iron, and more forgiving than composites. Stainless steel sinks
APUM4634†
resistant to rusting, staining or fading, and the finish resists
APUM5540† LH left /RH right hand small bowl* 330 x 400 x 185mm £212
will show their age.
APUM9948
Stainless steel is of course, much more durable than porcelain and
won't chip, nick or crack and of course a stainless steel sink is
scratches. Stainless steel maintains its lustre whilst other materials
Description
Sizes (L x W x D)
Price
AVIGNON
Undermounted 11/2 Bowl
AUXERRE
Undermounted 11/2 Bowl
150 x 400 x 130mm ONLY
Inset 11/2 Bowl
175 x 299 x 110mm
BIARRITZ
Other Items
180 x 360 x 130mm ONLY
LH left /RH right hand small bowl* 346 x 460 x 200mm £150
ONLY
340 x 400 x 180mm £109
Universal drainer
Aesthetics
We recommend Rotabond 2000 Silicone Sealant when undermounting or
sealing sinks, see website: www.kenteurope.com/uk for details
• Impact resistant - gives on impact
* Please specify left or right handed
• High grade 18/8 stainless steel brush satin finish
• Compliment any decor
• Resistant to mould, bacteria and mildew
• Extremely hard wearing - scratch and heat resistant
† includes a full plumbing kit, basket strainer waste
§ Right hand version of Avignon Sink not available in the above size until mid
2013, until then half bowl size = 175 x 300 x 130mm
full bowl size = 340 x 400 x 180mm
• Easy to clean and maintain
• Has more overall usable space than ceramic or cast iron
• Full anti condensation gypsum coating and silencer pad
See our website for further information on this and other Apollo®
products.
Apollo® Avignon
APUM4634LH/RH
Specify handing (includes plumbing kit)
Apollo® Auxerre
APUM5540LH/RH
Specify handing (includes plumbing kit)
SILICONE SEALANT
We recommend Rotabond 2000 silicone sealant when
sealing/undermounting sinks. For further details:
Freephone 0800 136925 email KENTsales.UK@kenteurope.com
website: www.kenteurope.com/uk
If a waste disposal unit is fitted to an undermounted sink after
installation additional support will be required!
20
Apollo® Biarritz
APUM9948 (includes waste only)
For further information Tel: 0845 618 9945 sales@apolloworktops.com www.apolloworktops.com
urban® sinks
apollo® urban
The Apollo® Urban sink 60mm internal radius (unsuitable for waste disposal)
Cat No. Description
U851#
Single Bowl
U853#
Half Bowl
U871#
Large Single Bowl
U752#
One & Half Bowl
Length
Width
Depth
500mm
413mm
210mm
317mm
168mm
317mm
168mm
413mm
175mm
352mm
413mm
352mm
Price
£432
150mm
£384
175mm
150mm
£683
£532
The Apollo® Urban sink has a stainless steel base and is available in
the colour of your choice to match or co-ordinate with your worksurface.
The top edge detail will be bevel edge unless otherwise stated.
Stainless steel bases can be susceptible to scratching.
There can be a slight variation in colour between sink and worktop.
In order to avoid any colour variance between the top and the bowl, we
suggest a bevel or moulded edge if this is not specified we will use our
discretion as to which detail will be used.
# Includes drainer - please add cost of your Urban sink to cost of selected blank and
advise position of the overflow when specifying an apollo® urban sink.
Urban sinks are not available in disclaimer colours
168mm
317mm
U851
U853
413mm
413mm
500mm
U871
Available in the Apollo® Slab Tech or Corian® colour of your
choice, the New Apollo® Urban sink is manufactured from the
same material as your worktop to create that much sought after
“monolithic look”.
352mm
413mm
168mm
317mm
U752
Wouldn't it be wonderful if you could design a kitchen where
even the kitchen sink could be seamlessly integrated into your
worktops?
All Apollo® Urban sinks come with a stainless steel base,
combining the practical qualities of stainless steel (which has
proved to be an extremely durable material ideal for kitchen
sinks and commercial applications) whilst maximising the
beauty of solid surface.
Apollo® Urban sinks are available at around half the cost of
similar solid surface sinks on the market and are available in a
number of popular sizes.
The Apollo® Urban sink enables the sink to be integrated
seamlessly into the worktop, so effectively it looks like part of
the worktop.
WARRANTY
All Apollo® products carry
a 10 Year Manufacturerʼs
Limited Warranty!
For further information Tel: 0845 618 9945 sales@apolloworktops.com www.apolloworktops.com
21
tools list
The Apollo® Worksurface range can be installed using the
woodworking tools that would be used by a skilled kitchen Installer.
The only other specialist tools that would be required, are listed
below, along with the consumables (which we expect to last for a
minimum of 50 installations).
Apollo® Quicktops® Granite & Quartz
Machine Tools
Supplier Make
Angle Grinder
Sheridan EDX
Ref
Nett Nett
Cost £
Sheridan Alpha
ASW-125
£218
Grinder Blade
Sheridan
270030
£24
Rambo Pad
Sheridan
652004
£36
Diamond Polishing Pads
Sheridan grey
173050
Diamond Polishing Pads
Sheridan yellow
173052
Dual Speed Stone Saw
Consumables
Velcro Backing Pad
Sheridan
Diamond Polishing Pads (available in packs)
Diamond Polishing Pads
Diamond Polishing Pads
Diamond Polishing Pads
Diamond Polishing Pads
Diamond Polishing Pads
Sheridan red
Sheridan blue
Sheridan green
Sheridan orange
Sheridan pink
25mm Hole Saw
Sheridan
Multi Radius Jig
Sheridan
35mm Hole Saw
Sheridan
EDX ST30H
986017
£5
173051
173054
173056
777031
Sheridan
Standard Inclusive Equipment:
Earth Fault Ciruit Interrupter,
Water Valve and Hose
Wrench, Straight Cutting Guide (Reversible)
Extra Carbon Brush Set, Self-Stick Felt Strips
DX ST 30H Variable Speed Grinder (110/240 Volt)
Specifications:
Power: 1200 watts
No Load Speed: 3000 - 6000 rpm
Spindle: M14
Max. Wheel Diameter: 125mm
Size: 303 x 72 x 80mm (L x W xH )
Standard Inclusive Equipment:
Wrench, Detachable Guard
£10
Apollo® Magna or Apollo® Slab Tech
5 Piece Router Bit Set
(includes presentation case)
173058
777091
Specifications:
Power: 1200 watts
No Load Speed: 13000rpm
Arbor: 20mm
Cutting Disc Diameter: 100/115mm
£20/pack
173057
Apollo® Slab Tech/Magna/Quicktops® Solid Surface
5 Piece Router Bit Set
£222
AWS-110 Wet Stone Cutter
£12
£45
£49
All the router bits you need for installing
Apollo® Magna or Apollo® Slab Tech
(please specify which when you order)
NEW
ONLYPER
£49
SET
MULTI RADIUS JIG
ALL COSTS ARE NETT NETT
22
For further information Tel: 0845 618 9945 sales@apolloworktops.com www.apolloworktops.com
installation training
Install Yourself - Free Training!
Any fears about being able to install Apollo® worktops
should be quickly dispelled, as installation is relatively easy
to carry out for either a competent DIY enthusiast or
recognised kitchen installer.
An installation video with easy to follow guide to installing
Apollo® worktops is available to download. In addition to this
free installation training courses are also available.
For further details of Apollo® installation training courses
please contact your Apollo® distributor (contact details on
reverse of this price list).
See below, this is taken from the granite/quartz section
fitting an end cap to a worktop
Mark where worktop
to be cut, before
taking outside to cut
measure position for
cutting guide
tape where cut will
be made and cutter
will be running
The Apollo® Installation video is available on-line to download
from www.apolloworktops.com
clamp guide in
position
commence cutting
with Alpha Cutter
until all waste
section removed
For further information Tel: 0845 618 9945 sales@apolloworktops.com www.apolloworktops.com
23
care & maintenance
The Apollo Installation and
Care & Maintenance Kits
Caring for your Apollo® worktop couldnʼt be
easier, all you need is included in the Apollo®
Installation/Care & Maintenance Kit. Please
read the instructions contained in the kit
carefully for full details of how to keep your
worktop in pristine condition.
Cleaning Apollo® worktops:
Wipe down the worktops daily and as
needed using water. Once a week wipe down
with a damp cloth and the detergent (which
formulated with a neutral pH) contained in
your Installation/Care & Maintenance Kit.
Do not use harsh chemicals!
Apollo® Granite, Quartz & Wood worktops:
Never use abrasive cleaners on Granite,
Quartz or wood worktops, they can scratch
and pit the surface of the worktop.
Apollo® Slab Tech, Apollo® Magna &
Quicktops® Solid Surface worktops:
For more stubborn marks and stains on solid
surface worktops, use Cream Clean (which is
contained in your Care Kit). Follow the
instructions in the booklet contained in your
Apollo® Installation/Care & Maintenance Kit.
24
Apollo® Installation/Care &
Maintenance Kits include everything
you need to install and care for your
Apollo® worktop.
For further information Tel: 0845 618 9945 sales@apolloworktops.com www.apolloworktops.com
MODULAR SYSTEM
Apollo® Wood kitchen layout
DESCRIPTION
3000mm Worktop
Item/No. Req.
AWA x 2
Cost
sub total
£175
£350
3000mm Breakfast Bar
AWD x 1
£238
£238
2000mm Upstand
AWE x 3
£9
£27
Stainless Steel Sink
SSS x 1
£150
£150
GRAND TOTAL
£765
TRADE
Apollo® Quicktop Granite kitchen layout.
DESCRIPTION
1040mm Worktop
2200mm Worktop
Item/No. Req.
Cost
sub total
QGB x 1
£323
£323
SSS x 1
£150
£150
QGE x 3
£33
£99
QGA x 2
2200mm Worktop sink c/o
QGC x 1
2000mm Breakfast Bar
QGD x 1
Stainless Steel Sink
3600mm Upstand
£191
£382
£501
£501
£440
GRAND TOTAL
£440
£1895
TRADE
Apollo® Quicktop Quartz kitchen layout.
DESCRIPTION
1040mm Worktop
2800mm Worktop
Item/No. Req.
Cost
sub total
QQB x 1
£426
£426
SSS x 1
£150
£150
QQA x 2
2200mm Worktop sink c/o
QQC x 1
2000mm Breakfast Bar
QQD x 1
Stainless Steel Sink
3600mm Upstand
QQE x 3
£188
£489
£433
£33
GRAND TOTAL
£376
£489
£433
£99
£1973
For further information Tel: 0845 618 9945 sales@apolloworktops.com www.apolloworktops.com
TRADE
25
MODULAR SYSTEM
Apollo® Quicktops® Solid Surface layout.
DESCRIPTION
Item/No. Req.
1800mm Worktop
3600mm Worktop
1800mm Worktop with One & Half
Bowl Solid Surface Sink
650mm Corner Piece
Cost
sub total
QSB x 1
£515
£515
QSF x 1
£182
£182
GRAND TOTAL
£1997
QSA x 1
(white)
1800mm Breakfast Bar
QSC x 1
QSD x 1
£292
£578
£430
Apollo® Slab Tech kitchen layout
DESCRIPTION
Item/No. Req.
£497
STC x 1
£753
2000mm Breakfast Bar
STD x 1
Bowl Solid Surface Sink
(white)
3000mm Upstand
DESCRIPTION
£753
£596
GRAND TOTAL
£2396
Item/No. Req.
£44
£88
Cost
sub total
£330
£330
AMA x 1
£225
1800mm Worktop with One & Half
AMC x 1
£383
£383
1800mm Breakfast Bar
AMD x 1
£297
£297
GRAND TOTAL
£1328
1800mm Worktop
3600mm Worktop
Bowl Solid Surface Sink
3600mm Upstand
(white)
AMB x 1
AME x 3
£31
For further information Tel: 0845 618 9945 sales@apolloworktops.com www.apolloworktops.com
TRADE
£462
£596
STE x 3
Apollo® Magna kitchen layout.
26
£497
2500mm Worktop with One & Half
STB x 1
£430
sub total
£231
2500mm Worktop
£578
Cost
STA x 2
1210mm Worktop
£292
TRADE
£225
£93
TRADE
distributors
The Apollo® range is available from our appointed distributors across the UK, please contact the distributor
for your region for further details about how to purchase any product from the Apollo® range.
27
support
Point of Sale
The Apollo® Display package includes:
• One Countertop Display Unit
• 8 Sample Folders
• Price Lists
• Product Brochures
Leaflets & Price Lists
Countertop Displays
Sample Books...
Training Days
containing samples of every Apollo®
worktop are available from your dealer
For you and your sales team
at our Head Office
Sales Training Manuals
Installation Training Manuals
Training videoʼs
On-line updates
YOUR APOLLO® DISTRIBUTOR
email: sales@apolloworktops.com
Current price lists and product
catalogues are available for
download from
www.apolloworktops.com
website: www.apolloworktops.com