ECC-VAV-W / ECC-VVT-W

ECC-VAV-W / ECC-VVT-W
easyCONTROLS
 LONMARK Certified
Wireless Single Duct Variable Air Volume /
Variable Volume Temperature Controllers
-
Wireless Receiver (868.3MHz)
4 Universal Inputs
4 Triac Outputs (Digital)
2 Universal Outputs
1 On Board Pressure Transducer (VAV-W Model)
Applications
- Designed to meet the requirements of single duct
variable air volume (VAV) or variable volume
according to temperature (VVT) applications
- Directly control a combination of up to 6 pieces
of equipment such as baseboards, duct
heating/cooling, multi-stage heaters. fans,
valves, lights, etc
- Compatible with a wide range of wired or
wireless sensors and peripheral equipment
Features
Interoperability
- Based on LONWORKS® technology for peer-topeer communication between controllers
without any intermediary
- LONMARK® certified according to the
Interoperability Guidelines Version 3.4
- LONMARK Functional Profile: SCC VAV
Controller #8502
Built-in Wireless Receiver
- Integrated
wireless RF technology allows
communication with a full suite of wireless
sensors and wireless light switches.
- Perfectly suited for retrofit installations and
buildings that don’t allow for in-wall wiring
- Using battery-less wireless sensors reduces
installation time and maintenance costs
Hardware
- Built-in brushless constant torque damper
actuator with improved life expectancy
- Integrated position feedback eliminates the
need for periodic re-initialization of the damper
- Accurate on-board air flow sensor for pressure
independent single duct VAV applications
- Air flow sensor zero pressure value is factory
calibrated
4 universal inputs (software configurable)
4 triac outputs (digital, PWM or floating)
2 universal outputs
Built-in occupancy output contact for the room
sensor LED
- Controller only (no actuator) VAV model
available to drive an external air damper
actuator
- Service pin positioned for easy commissioning
-
Software Plug-in
- Powerful and intuitive LNS® plug-in provides
-
-
-
-
easy customization of hardware I/O, control
sequences and communication schemes
Easily configure all features, including:
- Input and output types and properties
- Heating and cooling stages
- Control variable air flow
- PID control loops
Additional built-in features:
- Flow calibration
- Alarms
- Changeable network variable types
- Control of 2 rooms simultaneously
Various input types supported:
- Space temperature
- Setpoint adjustment
- Duct temperature
- Occupancy, bypass or window contacts
- CO2 concentration
Allows the use of spare I/O points to be linked
to other controllers on the network
The easyCONTROLS ECC-VAV-W / ECC-VVT-W line of controllers makes
use of the latest technology to provide more flexibility of control and reliability
than traditional VAV / VVT controllers. The integrated brushless constant torque
actuator has a longer life expectancy than standard brushed motors. The 16-bit
analog-digital converter provides high accuracy input and flow pressure sensor
readings and allows for precise VAV balancing.
The on-board wireless receiver provides support for a variety of wireless
sensors.The wireless peripherals supported by these controllers are easy to
install, highly adaptable and have no limitations as to the building materials they
can be mounted to. Distech Controls' wireless technology allows for batteryless wireless sensors and switches, reducing installation time and maintenance
costs. A wide selection of wireless temperature sensors, duct sensors,
window/door contacts and light switches can be used with the controller. The
ECC-VAV-W / ECC-VVT-W line features expanded I/O capability with 4
universal (analog digital) inputs, 4 digital outputs and 2 universal outputs. With
additional network outputs, the ECC-VAV-W can simultaneously control 8
instances of virtually any type of HVAC equipment including baseboards, duct
heaters/cooling, fans, multi-stage heaters, analog and floating valve actuators,
lights, etc.
The ECC-VAV-W / ECC-VVT-W can be configured by using the EC-Configure
plug-in through either any LNS-based software such as Distech Controls
Lonwatcher, or by using a multi-protocol platform software supporting
LONW ORKS devices such as EC-Net and EC-NetAX software powered by the
Niagara Framework and NiagaraAX Framework respectively. These
configuration interfaces are designed to simplify configuring and sequencing
methods by prompting the user for the necessary configuration data. The
controller then automatically selects the operation sequence according to the
input and output configurations and dynamically adapts itself to the network
variables that are bound to the controller.
The ECC-VAV-W model features a drift-free differential pressure sensor that
resists loss of accuracy over time due to dust particle accumulation.
Distech Controls also offers the EC-Smart-Sensor-VAV, a portable balancing
tool designed to work with the ECC-VAV-W / ECC-VVT-W. The EC-SmartSensor-VAV is used to facilitate flow calibration. The easyCONTROLS product
line is built to meet rigorous quality standards and carries a two-year warranty.
The complete line of easyCONTROLS controllers is designed for use with any
LONW ORKS-based and/or any other open and interoperable system – such as
EC-NetAX Pro. This provides both the contractor and the end user with the
flexibility of using “best of breed” products in system design.
Distech Controls’ quality management system is ISO 9001:2000 certified.
Product Specifications
Power
Voltage
Protection
Typical Consumption
Maximum Consumption
Inputs
24VAC; ±15%, 50/60Hz, Class 2
3A removable fuse for triac when using
the internal power supply
5VA
10VA (normal), or up to 50VA if internal
power supply is used for triac
(special application)
Environmental
Operating Temperature
Storage Temperature
Relative Humidity
0oC to 70oC; 32oF to 158oF
-20oC to 70oC; -4oF to 158oF
0 to 90% Non-condensing
Quantity
Input Types:
-Voltage
-Current
-Digital
-Resistor
Thermistor
Platinum
General
Standard
Processor
Memory
Communication
Transceiver
Channel
Wireless Receiver
Wireless Reception
Range
LONMARK Functional Profile: SCCVAV Controller #8502
Neuron® 3150®; 8 bits; 10MHz
Non-volatile Flash 64K (APB application
& configuration)
LonTalk® Protocol
FTX-1
TP/FT-10; 78Kbps
EnOcean® RCM120, 868.3 MHz1
10-30m in buildings, ~300m in free
propagation
Enclosure
Material
Color
Dimension w/ Screws
Shipping Weight
FR/ABS
Black & blue casing & grey connectors
4.9” x 8.9” x 2.5”
(124mm x 226 x 63mm)
2.30lbs (1.05kg)
Potentiometer
Differential
Pressure Sensor
(VAV model only)
Input Resolution
Quantity
4 Digital
6
Each (1) Triac Max 1A @ 24VAC
Max. Oper. Temp: 40oC; 104oF @ 1A
2 Universal
(Analog/Digital)
CE -Emission
-Immunity
Output Resolution
FCC
Type 2, 3 10KΩ
Range: -40oC to 120oC; -40oF to 248oF
Accuracy: ±0.5o C; ±0.9o F
RTD 1KΩ
Range: -40oC to 120oC; -40oF to 248oF
Accuracy: ±1.0oC; ±1.8oF
PT100 100Ω
Range: -40oC to 120oC; -40oF to 248oF
Accuracy: ±1.0oC; ±1.8oF
Translation table configurable on
several points, Accuracy ±0.5%
Range: 0-250Pa (0-1 in. W.C.)
Resolution: 0.04 milli-inches W.C.
Accuracy: ±3% full scale
16-bit analog / digital converter
Hardware Outputs
Electromagnetic Compatibility
EN55022:1998 class B
EN61000-4-2: 1995, level 3 in air
EN61000-4-2: 1995, level 2 by contact
EN61000-4-3: 1996, level 2
EN61000-4-4: 1995, level 2
EN61000-4-6: 1996, level 2
ENV 50204 : 1995, level 2
This device complies with FCC rules part
15, subpart B, class B
4
Universal (software configurable)
0-10VDC, Accuracy ±0.5%
4-20mA with 249Ω external resistor
(wired in parallel), Accuracy ±0.5%
Dry contact
Total (4) Triac Max 3A @ 24VAC
External or internal power supply
0-10VDC linear, digital 0-12VDC or
PWM Max: 20mA
Maximum load 600Ω
10-bit digital / analog converter
Network Outputs
Quantity
6 (software configurable)
The network outputs are used by
binding them to the free physical
outputs of controllers on the network.
Damper Actuator
Motor
Torque
Angle of Rotation
Fits Shaft Diameter
Power Supply
Belimo LMZS-H (Brushless)
35 in-lb, 4Nm
UL Listed
UL6EA7 Energy management equipment
95° adjustable
(CDN & US)
5/16-3/4"; 8.5-18.2mm
Material1
UL94-5VA
From controller
LONMARK
LONMARK certified
1. Before purchase, verify that local communication regulations allow the installation of devices that operate at a frequency of 868.3MHz.
2. All materials and manufacturing processes comply with the directive on Waste Electrical and Electronic Equipment (WEEE).
Agency Approvals
ECC-VAV-W
ECC-VVT-W
Distech Controls, Inc.
Tel. Toll-free North America: 1-800-404-0043
Tel. International: 450-444-9898
http://www.distech-controls.com
sales@distech-controls.com
ECC-VAV-W and EC-VVT-W Controller Selection Guide
Model Name
4 UI, 4 Triac
DO, 2 AO
On-Board
Pressure
Transducer
Brushless
Belimo
Actuator
Actuator
Feedback
Wireless
Receiver
ECC-VAV-W
ECC-VAV-N-W
ECC-VVT-W
Distech Controls Software Plug-ins and Wizards
Software Preview
LNS Monitoring Plug-in*
LNS Configuration Plug-in*
EC-Net
The monitoring plug-in is a graphical
user interface that monitors all device
parameters including inputs, outputs,
alarms and device status. There is no
more need to create any graphics
pages and as it can be launched from
any GUI that supports plug-in
applications, graphics dynamically
adapt themselves to the configuration
of the device as well as the real time
values being monitored.
Easily configure all of the devices’
parameters including inputs, outputs,
fan and valve settings, heating and
cooling setpoints, amongst others. You
can also enable and configure
additional built-in features such as
optimum start, load shedding, frost
protection and slave operation mode.
AX
and EC-Net Wizards
Designed for use with the NiagaraAX
Framework and Niagara Framework, the
EC-NetAX and EC-Net Wizards offer all the
same features accessible within the LNS
plug-in. Simply add the device to your
LON network and immediately launch the
configuration wizard with a couple clicks of
your mouse!
* LNS Plug-ins can be used with any LNS based network management and GUI tool, such as
Distech Controls’ Lonwatcher or Londisplay.
ECC-VAV-W
ECC-VVT-W
Distech Controls, Inc.
Tel. Toll-free North America: 1-800-404-0043
Tel. International: 450-444-9898
http://www.distech-controls.com
sales@distech-controls.com
Recommended Peripherals
Wireless Sensors*
SR04 Series
Wireless Room Temperature Sensor: Solar cell powered; With optional setpoint
adjustment and override
SRW01
Wireless Door/Window Contact: Solar cell powered
SR65 AKF Series
Wireless Duct Temperature Sensors: Solar cell powered
2-Channel Light
4-Channel Light
Wireless 2-Channel White Light Switch
Wireless 4-Channel White Light Switch
* Not all available wireless sensors listed. Please contact sales@distech-controls.com for a complete list of wireless sensors
Communicating LCD Sensor
EC-Smart-Sensor-VAV
Temperature Sensors*
EC-SENSOR
EC-SENSOR-LO
EC-SENSOR-SLO-CW
EC-SENSOR-AVG
EC-SENSOR-AVG-LO
Communicating Sensor with 2-line LCD display. Functionality includes setpoint
adjustment, indoor and outdoor air temperature display, occupancy state display
and VAV balancing (wired permanently or in portable mode, using 2-wire serial
communication interface). Especially designed to work with the ECC-VAV
line of controllers
Room sensor
Room sensor with LED and override push button
Room sensor with LED, override push button and setpoint adjustment (cool/warm)
Averaging room sensor, no setpoint (Up to 3 in parallel)
Averaging room sensor with LED and override push button
* Not all available temperature sensors listed. Please contact sales@distech-controls.com for a complete list of temperature sensors
Please contact sales@distech-controls.com for a complete list of available products and peripherals.
ECC-VAV-W
ECC-VVT-W
Distech Controls, Inc.
Tel. Toll-free North America: 1-800-404-0043
Tel. International: 450-444-9898
http://www.distech-controls.com
sales@distech-controls.com
Wireless Sensors and Open Networks
ECC-VAV-W
ECC-VVT-W
Distech Controls, Inc.
Tel. Toll-free North America: 1-800-404-0043
Tel. International: 450-444-9898
http://www.distech-controls.com
sales@distech-controls.com
Product Warranty and Total Quality Commitment
The easyCONTROLS product line is built to meet rigorous quality standards and carries a two-year
warranty. Distech Controls is an ISO 9001 registered company. Distech Controls' products provide both
the contractor and the end user with the flexibility of using “best-of-breed” products in system design.
LONMARK Objects & Network Variables
Specifications subject to change without notice. easyCONTROLS, Distech Controls logos are trademarks of Distech Controls Inc.;
LONW ORKS, LONMARK, LonTalk, LNS and LON are registered trademarks of Echelon Corporation.
AX
Niagara Framework and Niagara Framework are trademarks of Tridium, Inc. EnOcean is a registered trademark of EnOcean Gmb.
*05DI-DSCVAVW-22*
05DI-DSCVAVW-22
ECC-VAV-W
ECC-VVT-W
Distech Controls, Inc.
Tel. Toll-free North America: 1-800-404-0043
Tel. International: 450-444-9898
http://www.distech-controls.com
sales@distech-controls.com