Deck Mower for Skid Steers

FRM76
Deck Mower for Skid Steers
• Full 72” Cutting Width
• 15” Dual Sided Rotary Axe Blades
fecon.com
sales@fecon.com
+1 513 696 4430
800.528.3113
Technical Specifications
Cutting Width
72”
Overall Width
76”
Overall Height
40.5”
Overall Length
81”
Weight
Cross Carrier 1900 lbs
Round Carrier 2200 lbs
Round Carrier
The FRM76 for skid steers offers a full 72” working width and
can run on skid steer power as low as 21gpm and up to 45gpm.
It does not require a case drain hydraulic connection and
installation on any appropriately sized skid steer is plug-andgo. It offers both a cross, and round disk blade carrier to
match customer preference. The FRM76’s bi-directional
rotation allows for control of the discharge to the desired side
and eliminates the need to “flip” the double sided rotary axe
blades. The front chained intake door lifts to cut larger material
and the smooth deck surface promotes minimal debris buildup.
The robust construction of the FRM76 includes the thickest
wall components in the industry and replaceable AR400 steel
skid shoes providing for optimum service life.
FRM76-A-21
21-26 gpm
FRM76-A-27
27-30 gpm
FRM76-A-31
31-35 gpm
FRM76-A-36
36-41 gpm
• Heavy Duty Forestry Brush Cutter
FRM76-A-42
42-45 gpm
• Low and High Flow Hydraulic Set Ups (21 to 42gpm)
Cross Carrier
FRM76-21
21-26 gpm
FRM76-27
27-30 gpm
FRM76-31
31-35 gpm
FRM76-36
36-41 gpm
FRM76-42
42-45 gpm
*Pressure not to exceed 4100 PSI
• Replaceable AR400 Steel Skid Shoes
• 4-15” Dual-Sided Rotary Axe Blades
• Bi-directional Direct Drive Gear Motor
• Reinforced Front Push Bar
• Front Chained Intake Door Lifts for larger material
• Smooth Deck Service – Minimal debris build up
• Excellent material containment for better sizing
• • • • • • • Operator’s cab must be protected with both properly maintained 1/2” LEXAN® Glass (or equal) and Falling Object Protection.
Always ensure that your carrier manufacturers safety features (including Falling Object Protection, and Roll-Over Protection) meet your job safety requirements.
Certain guarding and features may have been removed for illustrative purposes, always run with proper guarding.
Weights may vary based on options.
Safety Is The Responsibility Of The Operator.
Specifications subject to change without notice.
Photographs may have been altered for marketing purposes.
GS-30F-0019S
9/13