Chemical Injectors

Chemical Injectors
E0777
ChemFlex Injectors
6350 Pulse Pump
Pulse Pump from Cat Pumps® permits chemical injection at pressures
up to 3000 PSI. Mounts on the center inlet port of many Cat Pumps
and is activated with each stroke of the pump.
Includes a prime bulb to start chemical.
Requires correct 76400
Series adapter for specific
Cat Pumps® models.
D
Shown
Mounted on
Cat Pump
Innovative Chemical Injectors for use with
Automatics, Self-Serve Systems and even
pressure washers applications. 3/8” MPT
stainless steel inlet and outlet ports and PVDF/
Kynar injection bodies with Teflon o-rings,
ensure the highest chemical and corrosion
resistance available.
Part No.
Threaded fitting to allow for
installation of metering tips
Hastelloy®
spring
Nozzle
0.057 in.
1100830.083 in.
Teflon
1100860.086 in.
Insert molded Kynar® body
is resistant to chemicals &
corrosion
Adjustable Chemical Injector from
Suttner. Forged brass housing with
stainless steel spring and ball. Rated to
3600 psi. Large control knob for easy
adjustment. Siphon rate of up to 10:1. Inlet
and outlet ports are 3/8” FPT. Chemical
barb is 1/4”.
D
Chem-Flex comes in
many convenient sizes,
body color is coded to
the nozzle size
1100980.098 in.
1210830.083 in.
Max.Flow
Part No.
PSI
Rate
Net Ea.
NP ST62
3600
5 GPM
$ 21.95
Convenient NPT attachment
D
Part No.
Upstream Injectors
NP ST64
NP ST64-5
110057
Proprietary O-ring for increased
chemical resistance to reduce
O-ring swelling
Adjustable Injector
Part No.
Color
Barb Fitting
Call Us for Details !
These adjustable injectors are designed
to introduce chemicals into the upstream
side of pumps. This allows for high
pressure chemical applications. Brass
body with stainless ball and spring are
standard. Ports are 1/2" FPT inlet and
1/2" MPT outlet. 4' of tubing with strainer
is also included. Rated to 140 PSI.
D
D
Color coded and clearly marked for a wide variety of
flow ranges. Available with single, double and triple
chemical barbs for injection of more than one chemical at the same time. Slip-in
replacement for injectors used on most of the common high pressure automatics in
the car wash industry. Chemical barbs are 1/4” and are standard with internal threads
to accept a wide range of orifice tips, (sold separately). Rated to 1000 PSI and 175° F.
Flow Rate
Ports
Net Ea.
1.5 - 3.9 gpm
4.0 - 7.0 gpm
1/2"
1/2"
$ 29.65
29.70
Flow
Office
*Flow
Range
No. of
Barbs
Color
HF 110057
.057
1.0 GPM
1
Red
HF 110070.070
2.2 GPM
1
Orange
HF 110083.0832.3 GPM
1
Grey
HF 110086.0862.5 GPM
1
Blue HF 110098.098
4.0 GPM
1
Green
HF 121057.057
1.0 GPM
2
Red
HF 121070.070
2.2 GPM
2
Orange
HF 121083.0832.3 GPM
2
Grey
HF 121086.086
2.5 GPM
2
Blue
HF 121098.098
4.0 GPM
2
Green
HF 118125.125 5.0 1 Green HF 131057.057
1.0 GPM
3
Red
HF 131070.070
2.2 GPM
3
Orange
HF 131083.083
2.3 GPM
3
Grey
HF 131086.086
2.5 GPM
3
Blue
HF 131098.098
4.0 GPM
3
Green
DE 100-15K
Tip Kit, Standard..................................... DE 100-15KU Tip Kit, Ultra Lean................................... Net Ea.
$ 37.95
37.95
37.95
37.95
37.95
48.75
48.75
48.75
48.75
48.75
37.95
71.95
71.95
71.95
71.95
71.95
7.10
37.95
* Flow based on 250 PSI incoming water pressure.
Pulse Pump
Injector
D
PUMP
ADAPTER VALVE
SERIES FITTING ASSEMBLY
60 (TC)
44 (EZ)
63 (TX)
47
66 (TSF)
520222
520197
520197
520190
520223
Part No.
103036
103036
103036
103035
103090
Pulse Pump Injectors from General
Pump are designed to inject
chemicals with every stroke of the
pump. Designed to mount to the
valve port of General Pump models.
Construction is 303 Stainless Steel
with Buna diaphragm. Inlet and outlet
are 1/8” FPT, pulse port is 1/4” FPT.
To convert existing pumps, one
adapter and one valve assembly is
also required from the chart shown.
MaximumMaximum
Pressure
Flow
IP 100906 Pulse Pump
1500 PSI .75 GPM
Viton® is a registered trademark of DuPont Performance Elastomers
DULTMEIER SALES
OMAHA, NE (800)
Net Ea.
$ 239.00
228-9666
•
Stainless Steel
Chemical Injectors
Stainless Steel Chemical Injectors for use as
replacements in many common Automatics such as PDQ
Systems.Injectors are stainless steel construction with
3/8" MPT inlet and outlet. Chemical barbs are
1/4" hose barb with internal threads for "screw in"
metering tips, (not included). Rated to 5500 PSI.
316SS, Viton® seal. Rated to 190° F. Available in
single barb or dual barb models.
Part No.
Orifice Barbs.
GPM
IP 100336.057 1 1-2
Dual Barb
IP 100835.070 1 2-3
No. 100541
IP 100334.083 1 2-4
IP 100333.086 1 3-5
D
IP 100339.098 1 5-8
IP 100541.083 2 2-4
DE 100-15K Tip Kit, Standard
DE 100-15KU Tip Kit, Ultra Lean
IP 100464
Repair Kit
DAVENPORT, IA (800) 553-6975 • www.dultmeier.com
Color Coded
Metering
Tips Are
Optional
D
Net Ea.
$ 25.95
38.15
25.95
25.95
25.95
51.95
7.10
4.07
16.95
E0777