Portable Event Stalls - Hi-Hog

Portable Event Stalls
Your exhibitors will thank you
1
11
11
8
11
5
4
9
3
10
8
12
6
2
7
2
13
Figure 1: Item #4404, Portable Stall with full height swing door
Figure 2: Item 4410, Portable Stall Partition
For those who demand excellence, Hi-Hog’s 10’ x 10’ portable event stalls are designed for quick, hassle free installation,
year after year. The 7’ high stall fronts and partitions are light enough to handle and strong enough to endure multiple
installations. The ideal stall for the equine event market.
Hi-Hog’s portable horse stalls are designed for quick and efficient installation without sacrificing durability or safety. Our partition panels
come with three-way connectors on one end. This design means that a bank of back-to-back stalls will only need one stall post. This
makes installations a breeze. The fronts are available with either a 3/4 height door or a full height door (as shown above). The doors
swing out of the stall and can lie flat against the stall front.
1.
2.
3.
4.
5.
6.
7.
8.
9.
One piece solid welded frame. No assembly required. Simply pin the
panels together.
Large heavy duty connectors allow for quick and simple installation,
even on uneven grades.
Partitions come with a 3” forklift slot to make installation easier.
The top rail of the 3/4 height stall front gate is extended to the door
frame to remove a potential leg trap.
All tubing ends have been coned to provide a safe rounded finish.
The gate come with a simple but secure latch.
The gate will swing out and lay flat against the front of the stall.
The front comes with four tie-down-loops for feed and water pails.
The top portion of the partition is filled with 16 gauge sheet metal.
Stalls can be purchased with or without roofs. Roof tarps are
designed for stall configurations 20’ wide by 30’ long minimum.
Please call 1-800-661-7002 for pricing. Pricing varies with
options and quantities.
10. The metal has been formed with ridges to provide additional
strength and reduce vibration.
11. The interior verticals provide additional strength to the stall front,
the door panel, and the partition.
12. The supporting flat iron has been slotted to allow for the expansion
and contraction of the HDPE Copolymer panel.
13. We use bright white HDPE Copolymer sheets to fill the bottom half
of our stall fronts and partitions. The UV treated, HDPE copolymer
sheets are designed for extreme outdoor applications. The sheets
possess high rigidity and excellent impact strength, even in the cold.
Our sheets are easy to clean and are highly resistant to chemicals.
14. Frames are powder coated hunter green.
Portable Event Stalls
Item No.
Description
Weight (LBS)
4401
10’w x 7’h Portable Stall Front with 3/4 Door
181
4404
10’w x 7’h Portable Stall Front with Full Door
192
4410
10’w x 7’h Portable Stall Partition
4421
7’h Portable Stall 3-Way Connecting Post
181.5
10
320 stalls at Pima fairgrounds in Tucson, Arizona
Toll Free 1-800-661-7002
September 2011
|
Direct 1-403-280-8300
|
salesinfo@hi-hog.com
|
www.hihog.com