gps antennas - Haigh

W
THE
ORL
D
LEA
N HIG
DER I
H PERFORM
A N C E W RA PA RO U N D ™
ANTEN
NAS.
GPS ANTENNAS
Haigh-Farr GPS antennas are available at the L1 frequency or
at both the L1 and L2 combined in a single connector. Our GPS
antennas are designed for flat, cylindrical or conical shaped
mounting surfaces and represent the future in aerospace
engineering as GPS receiver technology leaps forward.
Hemispherical coverage is provided when a single element is
used and spherical coverage is provided when Haigh-Farr’s
Wraparound™ configuration is used.
Dual channel designs are available which contain both a GPS
and Telemetry antenna in a single package.
Haigh-Farr GPS antennas are conformal and may be mounted
flush or on the exterior of the vehicle.
For high aero-heating applications an ablative heat shield may
be added. The single element may be provided inside a thin
conformal radome for enhanced ruggedization.
FEATURES
APPLICATIONS
• Flat, Cylindrical or Conical Shapes
• Launch Vehicles
• Single Element or Wraparound™
Configurations
• Hemispherical or Spherical
Coverage
• Atmospheric Rockets
• Missiles
• Drones
• Aircraft
• GPS L1 or Combined L1 and L2
• Helicopters
• Thin Aerodynamic Shape
• Spacecraft
• Conformal-Flush or External
• Targets
Mounting
• Rugged Construction - Designed
for Tactical Missile Environments
9/99
• Scoring Systems
• Guided Bombs
DESIGN CAPABILITY
With over 30 years of design history, your antenna configuration/
performance requirements may already exist, or extrapolations
from similar Haigh-Farr designs may be possible with minimal
effort. If a design meeting your requirements does not exist,
Haigh-Farr has the experience and modeling capability to
customize a solution. Contact Haigh-Farr for a review of your
antenna requirements.
Haigh-Farr, Inc. 43 Harvey Rd, Bedford, NH 03110
Tel: 603-644-6170, Fax: 603-644-6190
E-mail: sales@haigh-farr.com, Web Site: www.haigh-farr.com
GPS ANTENNAS
THE WORLD LEADER IN
HIGH PERFORMANCE
WRAPAROUND™
ANTENNAS.
TYPICAL SPECIFICATIONS
Antenna Type:
Wraparound™ or Single Element
Operating Bands:
L1 or L1 & L2
Input Impedance:
50 Ohms
VSWR:
2:1 Max across Band
Polarization:
RHC
Radiation Pattern: 1
See plots to right
Connector:
SMA standard, other connector
options available including direct
cable feeds
Weight:
Function of electrical requirements
2.5 ounces (70 g), basic L1 antenna
Dimensions:
Design parameter
Basic L1 antenna dimensions:
Width: 3.5” (89 mm)
Length: 4.0” (102 mm)
Thickness: .1” (2.5 mm)
Mounting Surface:
Antenna is flexible and provided to
naturally mate with specified
cylindrical, conical or flat surface
Securing:
Screw and/or Bond
Altitude:
Any
Environment:
Design parameter, typical of tactical
supersonic missiles and kinetic kill
weapons
ROLL
L1 WRAPAROUND™
PITCH
L1 WRAPAROUND™
ISOTROPIC - 0 dB
ISOTROPIC - 4 dB
PITCH
L1 SINGLE ELEMENT
PITCH
L2 SINGLE ELEMENT
ISOTROPIC - 5 dB
ISOTROPIC - 6 dB
1Radiation patterns are a function of the vehicle shape and size since
the vehicle serves as the ground plane for the antenna. The patterns
shown were measured on a typical smooth cylindrical ground plane.
Represented by:
Haigh-Farr, Inc.
43 Harvey Road
Bedford, NH 03110
Tel: 603-644-6170
Fax: 603-644-6190
E-mail: sales@haigh-farr.com
Web Site: www.haigh-farr.com