Marine and Land Based AM/FM Antenna
Transcription
Marine and Land Based AM/FM Antenna
FAME4 Marine and Land Based AM/FM Antenna FAME4 is a high quality fiberglass omnidirectional receiving AM/FM antenna. The FAME4 is manufactured in premium quality materials in order to prevent galvanic corrosion and has a chrome ferrule for 1”-14 TPI threads. FAME4 has been sold worldwide through more than three decades. The antenna is subject for improvement at all times. The antenna has the same rugged design as all other AC Antennas products thus it withstands harsh environmental conditions, both on sea and land. Electrical specifications Frequency range (MHz) AM: 0.15-30.0 FM: 88.0-108.0 Nominal impedance (ohm) 75 VHF power rating (Watt). Receiving only Gain (dBd/Marine dB) AM: 3/6 FM: 3/6 Polarization Vertical Connector 18m/60ft RG58C/U Cable DC-shorted No Mechanical specifications Length (m/ft) 2.68/8.8 Weight (kg/lbs) (incl. Cable) 1.34/3.0 Wind rating (m/s / mph) 45/101 Material Fibreglass Colour White polyurethane lacquer Temperature range (°C/°F) -55 to +60 / -67 to +140 Ingress Protection IP66 Mounting No mount included. Recommended: N200F supporting the antenna radome must be ordered separately. Can be used with all 1”-14 thread standard AC Antennas mounting equipment. AC Antennas A/S · Fabriksparken 40 · DK-2600 Glostrup · Denmark · Tel: +45 4581 0413 acantennas@acantennas.com · www.acantennas.com Specifications subject to change without further notice. The information in this document does not form part of any quotation or contract. 30 April 2015