PHENOM 100 - Inwavetech

Transcription

PHENOM 100 - Inwavetech
PHENOM 100
AM Technology Antenna
•
•
•
•
•
•
•
•
•
•
•
•
Fully Integrated Electronic
Two loop Antenna
Detection up to 1,00m each side with labels
Compatible with all 58kHz Hard Tags and Labels providers
Mono antenna Master with optional Slave Antenna
Wireless setting with Palm© or web browser (wifi,
internet / ethernet)
Ultra Fast Logical Technology
Easy to fix and install
Independent setting Buzzer/Lamp duration and type
Fast detection up to 3,00m/sec
Easy Trimmer setting monitoring antenna current
Only need 220Vac/110Vac supply connection
INWAVE TECHNOLOGIES: Our EAS Solutions use significantly
more advanced technology than other products on the market
for an equivalent investment.
The PHENOM system is a stand-alone antenna able to detect
58kHz Labels and Hard Tags, from any provider.
The anti-theft system emits a beep and red light signal at the
exit of the store when an activated Label (that has not been
deactivated at the checkout) or when a Hard Tag (that cannot
be deactivated) is passing through the magnetic field of the
antennas.
The PHENOM System allows full adjustments by a Palm
Software communicating with the electronic board through
an IR wireless interface. That includes basic adjust as buzzer
duration and volume as complex adjust only authorized for
trained technician.
The PHENOM antenna is fitted with all the electronic boards
inside providing easier installation and connection.
info@inwavetech.com
www.inwavetech.com
Phone: + 55 21 2604 2685
Electronic
Technician Settings
Operating Frequency
Field rotation
58.0/58.2 kHz
Field rotation
Hor/Ver/Multiplex
Vertical/Horizontal
Frequency
transmission
58.0/58.2/Multiplex
Antenna Current
Receiver Inputs
16A peak
2Ports multiplexed
Step Frequency receiver
28.5Hz
Integrated Counter
Alarm
4Bytes EEprom
Burst Transmission
duration
Sinal/Noise Ratio
0-6dB (15steps)
3-10 (7steps)
AC-191
Adjustment interface (palm)
AC-192
Web ethernet adjustment
interface
AC-193
Web wifi adjustment interface
AC-300
Events remote logger
AC-310
Relay output board
AC-460
Anti-jamming
AC-410
Pager transmiter
AC-411
Pager receiver
0-3 (3steps)
>57.597 <59.831
255 steps
Buzzer duration
0 to 15sec
(16 steps for change Q filter limits)
Lamp duration
Lamp blinking choice
0 to 15sec
4
Electrical
Entry voltage
Frequency
Consumption
Primary Power Fuse
info@inwavetech.com
www.inwavetech.com
>20 <120
Mechanical
Size
42.7x11.3cm
Height
152cm
Weight Master Pedestal
12.3Kg
Weight Single Pedestal
11.8Kg
Weight Slave Pedestal
8.1Kg
220/110Vac
50/60Hz
160W Max
2.5A
Accessories
Hits for Alarm
Sensibility
15 steps or trimpot
PHENOM slave antenna
IRDA adapter (for adjustments)
Q tag range
Buzzer Volume
PHENOM master antenna
PH-102
AC-190
Frequency tag
range
4
PH-101
300-920µS (15steps)
255 steps
Buzzer melody choice
PHENOM System (Mst.+Slv.)
1.6/1.0/0.8/0.5 ms
(16 steps for change Frequency filter limits)
Transmission delay
PH-100
Receiver delay
Background filter
Basic Settings
Purchase code
External Conditions
Temperature
0 to 45° C
Relative air humidity
up to 90%
Add “I” for Ipoint
Wireless setting with
Palm© or web browser
(wifi, internet / Ethernet)
Tested LCIE - Laboratoire
Central des Industies
Electriques - Une Société de
Bureau Veritas - France
Phone: + 55 21 2604 2685