Main catalogue 2016 Woodworking machines for DIY

Transcription

Woodworking machines
for DIY enthusiasts and craftsmen
Main catalogue 2016
HOLZSTAR woodworking machines – for DIY enthusiasts and professionals
Sales and service Germany in Hallstadt/Bamberg
Dear Customer,
Preface
There are many good reasons for taking a close look at this catalogue!
Our objective is to facilitate your work with products by HOLZSTAR.
HOLZSTAR offers discerning DIY enthusiasts a state-of-the-art, entrylevel woodworking program.
In this catalogue, you will find machines for a wide range of
applications such as model building, interior design, the building site,
toy making, handicrafts and much, much more.
Thanks to our comprehensive network of specialist retailers, you are
guaranteed to find a local partner happy to offer you advice, hands-on
support and after-sales service. And, of course, our in-house team of
experts is there to help you at any time.
www.holzstar.de
Kilian Stürmer
General Manager
Robert Stürmer
Sales Manager
The STÜRMER Logistics Centre with approx. 22,000 m² of storage space
More than 345,000 articles are available for delivery from stock at the
STÜRMER Logistics Centre. This allows for fast shipment of almost all of
our products to Germany and throughout Europe.
2
Sanding/grinding
Turning
Wet and dry bench grinder
Lathes
NTS 251
4-5
DB 450
DB 900 /DB 1100
Belt and disk sanders
BTS 150 / BTS 250
6-7
Cylinder sanding machine
ZSM 405
8
Edge milling machines
29
30 - 31
DB 1202
32
Accessories
33
Extraction
Extraction units
KSO 790 (230 V / 400 V)
9
SAA 901
34
10
SAA 2001
34
KSO 850 (230 V / 400 V)
10
SAA 2003
34
KSO 1500 F
11
SAA 3001
34
Planing
SAA 3003
34
Jointing/thicknessing planers
Workshop equipment
KSO 750 (230 V / 400 V)
ADH 200 / ADH 250 / ADH 305
ADH 260
New
12 - 13
14
Workshop accessories
Measuring tape TBM 5 x 19
35
Milling/multi-purpose combinations
Protractor WM 180
35
Spindle moulder
Workpiece stop
35
TF 200 SE
15
Universal multiple combination
UMK 6
16 - 17
Sawing
36
MS 1 R
36
MS 3 R
36
SB 1
18
Table saws
36
Folding trestle
FAB 1
TKS 255 M
19
TKS 315 E
20
TKS 315 Pro
21
TKS 250 SC (230 V / 400 V)
MS 1 K
Sawbuck
Chop and mitre saws
KGZ 305 E
Material supports
22 - 23
Sliding table saws
36
Telescopic trestle
TAB 1300
36
Universal material supports
UMS 1
37
Clamping table/workbench
FKS 315-1500 E
24
FKS 315-2000 E
25
Wood band saws
SWT 100
37
Cantilever roller conveyor
SRB 130
37
HBS 251
26 - 27
Universal workbench
HBS 351-2
26 - 27
UWT 3200
HBS 400
26 - 27
Carpenter's workbenches
HBS 471
26 - 27
HB 1401
39
HBS 473
26 - 27
HB 1901
39
Jig saw
DKS 502 Vario
HB 1701
38 - 39
New
39
28
3
Wet and dry bench grinder
HOLZSTAR NTS 251 – Universally deployable web/dry grinding machine
for grinding metal, glass, stone and other materials
XXIdeal for DIY enthusiast and crafts
professionals
XXFor wet and dry sanding and grinding
XXMany holding devices for various tools
available
XXThird-party holding devices can be used
on the height-adjustable clamp
XXSpecially developed, water-resistant grinding
disk with a long service life
Model
Art. no.
Technical data
Grinding stone dimensions
Honing disk dimensions
Speed
Motor output
Electrical connection
Weight
Dimensions (L x W x H)
4
XXDue to the low speed of just 90 rpm in
combination with water, no heat is generated
during grinding; this avoids affecting the tool
hardness
XXLockable on/off switch with emergency stop
XXIncl. leather honing disk, universal holder, and
angle setting gauge
XXEasy to transport
NTS 251
5902251
Max. Ø 250 x 50 mm
Max. Ø 220 x 30 mm
90 rpm
200 W
230 V/50 Hz
16 kg
340 x 280 x 460 mm
Angle setting gauge
(Registered design)
Accessories
Grinding stone Ø 245 x 50 mm
Leather honing disk Ø 220 x 30 mm
Art. no.
5910251
5910252
Sanding/grinding
Accessories NTS 251
Grinding cutting tools
(Art. no.: 5910018)
Grinding hatchets and axes
(Art. no.: 5910018)
Grinding gouges
(Art. no.: 5910021)
Grinding planer knives
(Art. no.: 5910024)
Grinding device for knives
(Art. no.: 5910027)
Dressing the grinding stone
(Art. no.: 5910029)
(Rough/fine) dressing of the grinding stone
(Art. no.: 5910030)
Grinding round blades
(Art. no.: 5910032)
Sawing
Art. no.
5910018
5910021
5910024
5910027
5910032
5910038
5910026
5910029
5910030
Turning
Accessories
Preparing axes/cutting tools, etc.
Jig set for gouges
Machine planer blade jig *
Jig for blades *
Jig for round blades
Multi-purpose grinding device, 0-30° *
Slide rail for grinding devices
Dressing diamond with holding device *
Dressing grindstone rough/fine
Multi-purpose combinations
Planing
Holding device slide rail
(Art. no.: 5910026)
* This accessory can only be used in combination with slide rail Art. no. 5910026
Grinding at angles between 0-30°
(Art. no. 5910038)
Step 1: Check and determine the cutting angle.
Step 2: Setting the measured angle of cut.
Step 3: Set the matching height for the cutting
angle.
5
Workshop equipment
Extraction
The 3 steps to achieving a perfect angle setting:
Belt and disk sanders
HOLZSTAR belt and disk sanders BTS 150 and BTS 250 – Universally deployable for deburring,
surface and contour sanding. Ideal for model makers and DIY enthusiasts.
XXSuitable for many materials and shapes
XXTorsion-free machine housing made of grey
cast iron
XXThe infinitely pivotable belt sander, from 0° to
90°, can be used horizontally and vertically
XXDouble-guide, pivoting work table, infinitely
adjustable between 0° and 45°
XXFaster and easier sanding belt replacement
without tools thanks to quick clamping device
XXIntegrated extraction duct for connecting an
external extraction unit
XXIncl.incl. sanding belt and sanding disk
The sanding unit can be
infinitely pivoted from
0° to 90°
(BTS 150 only)
BTS 150
With mitre stop as a factory
standard
BTS 150
With pivoted sanding unit. The
table can also be pivoted.
BTS 150
The BTS 150 is guided on both
sides for enhanced stability
Model
Art. no.
Technical data
Sanding belt size
Disk size
Table size
Speed
Motor output
Extraction duct Ø
Weight
6
BTS 150
5904150
BTS 250
5904250
915 x 100 mm
150 mm
150 x 230 mm
2850 rpm
400 W
230 V/50 Hz
58 mm
17 kg
560 x 270 x 300 mm
1220 x 150 mm
250 mm
360 x 200 mm
1440 rpm
800 W
230 V/50 Hz
58 mm
47 kg
720 x 410 x 440 mm
For sanding long edges, faces, curves, mitres and for flat surfaces at
right-angles. For machining softwood and hardwood.
Large sanding disk
for sanding curves
and radii.
Sanding/grinding
The factory-standard stop can
be used as a sanding table for
sanding with a pivoted sanding
device.
Faster and easier sanding
belt replacement thanks to
quick-clamping system
The BTS 250 is
equipped with a
large aluminium
work table.
The work table is
guided on both
sides for even
more stability
The robust work table pivots
through 0° to 45°. The preset
angle can be read off on a scale.
Planing
Additionally features practical carrying handles.
(BTS 250)
With lockable emergency off switch to
prevent unauthorised use.
(BTS 250)
BTS 250
With optional chassis
(Art.no. 5914250)
Included in scope of delivery:
60 grain sanding belt, 80
grain sanding disk
Accessories
Art. no.
PU
Sanding belts BTS 150 (915 x 100 mm)
60 grain
5911006 (PU 10)
80 grain
5911008 (PU 10)
100 grain
5911010 (PU 10)
120 grain
5911012 (PU 10)
150 grain
5911015 (PU 10)
Sanding disk* and hook and loop mount BTS 150
60 grain hook and loop 5911506 (PU 10)
Hook and loop mount
5911001
*Hook and loop mount for sanding disk from the accessories range also required. Hook and loop mount not included in BTS 250 scope of supply.
Extraction
Optional angle stop BTS
250
Partition plate for replacing the
sanding disk
·· For easy installation and
removal of sanding disks with
a hook and loop fastener on
belt and plate grinders
·· Art no. 5900301
7
Workshop equipment
Accessories
Art. no.
PU
Chassis for BTS 250
5914250
Angle stop for
BTS 250
5910814
Reducing socket Ø60/100 514 2427 (PU 1)
Sanding belts BTS 250 (1,220 x 150 mm)
60 grain
5911206 (PU 10)
80 grain
5911208 (PU 10)
100 grain
5911210 (PU 10)
120 grain
5911212 (PU 10)
180 grain
5911218 (PU 10)
Sanding disk* and hook and loop mount BTS 250
60 grain hook and loop
5912506 (PU 10)
80 grain hook and loop
5912508 (PU 10)
Hook and loop mount
5912501
With integrated extraction duct
for connecting an external extraction device.
Turning
Sawing
The BTS 250 is guided on both
sides for enhanced stability
Cylinder sanding machines
HOLZSTAR cylinder sanding machine ZSM 405
For surface sanding of workpieces with width of up to 405 mm
XXThe ideal cylinder sanding machine for DIY
enthusiasts
XXcontinuously variable feed speed of 0 - 3 m/
min for optimum sanding results
XXSanding unit can be quickly and precisely
adjusted to the workpiece with a heightadjustment crank and scale
XXSuitable for use with commercially available
emery cloth
Travel device for easy displacement
of the machine
Fast and easy sanding belt change
Height adjustment of the sanding
unit can be read off on a scale
Features
·· Extraction unit
·· Front table extension
·· Rear table extension
·· Travel device
Model
Art. no.
Technical data
Sanding length x width max.
Workpiece thickness max.
Sanding roller Ø
Sanding roller width
Infinite feed
Speed
Extraction duct Ø
Motor output
Weight
8
ZSM 405
5901405
60 x 405 mm
130 mm
132 mm
410 mm
0.5 - 3.0 m/min
1440 rpm
100 mm
1.5 kW
230 V
80 kg
1030 x 950 x 1300 mm
Sanding belts ZSM 405 (bulk on roll)
80 mm x 50 m, 60 grain
80 mm x 50 m, 80 grain
80 mm x 50 m, 100 grain
80 mm x 50 m, 120 grain
80 mm x 50 m, 150 grain
80 mm x 50 m, 180 grain
80 mm x 50 m, 220 grain
Art. no.
5918760
5918780
5918710
5918712
5918715
5918718
5918722
Approx. 2.5 m sanding belt are required for one winding.
XXLongitudinal table is height-adjustable by 110 mm
for optimum use of the sanding belt width
XXIncl. infinitely adjustable mitre stop
XXGraphite coating on the sanding show for improved
gliding properties of the sanding belt and longer
service life
Mitres up to 45° by pivoting the
longitudinal table
Planing
XXLongitudinal and transverse table for mitres
infinitely pivotable between 0° and 45°
XXHorizontal and vertical sanding device; thus
supports a wide range of applications
XXvertical sanding possible
XXSanding belt quick clamp
XXFactory-standard transverse table for contour
sanding, pivotable up to 45°
Sanding/grinding
Edge milling machines KSO 790
With pivotable sanding unit and 2 adjustable work tables
Turning
Sawing
Easiest possible approach to
sanding radii
Scope of supply:
·· Mitre stop
KSO 790 (400 V)
5900790
810 / 890 mm
810 / 890 mm
80 mm
80 mm
790 x 221 mm
790 x 221 mm
514 x 21 mm
514 x 21 mm
2010 x 152 mm
2010 x 152 mm
790 x 152 mm
790 x 152 mm
70 mm
70 mm
11 m/s
11 m/s
1.5 kW
1.5 kW
230 V/50 Hz
400 V/50 Hz
100 mm
100 mm
78 kg
78 kg
1270 x 540 x 1020 mm 1270 x 540 x 1020 mm
Sanding belts KSO 790
Art. no.
2010 x 152 mm, 60 grain
2010 x 152 mm, 80 grain
2010 x 152 mm, 100 grain
2010 x 152 mm, 120 grain
2010 x 152 mm, 150 grain
2010 x 152 mm, 180 grain
2010 x 152 mm, 220 grain
Woven sanding belts KSO 790
2010 x 152 mm, 60 grain
2010 x 152 mm, 80 grain
2010 x 152 mm, 100 grain
2010 x 152 mm, 120 grain
2010 x 152 mm, 150 grain
2010 x 152 mm, 180 grain
2010 x 152 mm, 220 grain
5917560
5917580
5917510
5917512
5917515
5917518
5917522
Packaging
unit
(10)
(10)
(10)
(10)
(10)
(10)
(10)
5917660
5917680
5917610
5917612
5917615
5917618
5917622
(10)
(10)
(10)
(10)
(10)
(10)
(10)
Extraction
Technical data
Table height min./max.
Table height adjustment
Longitudinal table dimensions
Transverse table dimensions
Sanding belt dimensions
Sanding surface
Sand roller diameter
Sanding belt speed
Motor output
Motor output oscillation
Extraction duct Ø
Weight
KSO 790 (230 V)
5900791
9
Workshop equipment
Model
Art. no.
HOLZSTAR edge milling machine KSO 850
Standard edge milling machines with pivoting sanding unit and
oscillating sanding belt
XXWith oscillating sanding belt for good material
removal, a clean finish and improved sanding belt
service life
XXWith height-adjustable sanding table
XXWith -45° to +45° infinitely adjustable mitre and
workpiece stop as factory standard
XXInfinitely pivoting sanding unit (0 - 90°) for vertical and
horizontal sanding
XXTable height-adjustable via handwheel
XXRobust grey cast iron work table with T-grooves,
improved machine stability during working
XXWith height-adjustable additional table for contour
sanding
XXFast and easy sanding belt replacement thanks to
quick-clamping system
XXSpring-loaded clamping device for
even belt tension
XXGrinding shoe with graphite coating as factory
standard
XXExtraction port Ø 100 mm
XXWith lockable storage space in factory standard
chassis
XXWith lockable emergency off switch
New
KSO 750
Thanks to the pivotable sanding
unit, the edge milling machine can
be used for a variety of sanding
tasks, such as vertical and horizontal sanding
KSO 850
Scope of supply:
·· Mitre stop
·· Workpiece stop 700 x 60 mm
New
Model
Art. no.
Technical data
970 / 1050 mm
80 mm
Longitudinal table dimensions 750 x 250 mm
300 x 250 mm
2260 x 150 mm
Sanding area
820 x 170 mm
(graphite coating)
110 mm
Sanding belt speed
16.3 m/s
Motor output
2.2 kW
230 V / 50 Hz
Extraction duct Ø
100 mm
Weight
120 kg
1300 x 750 x
Dimensions (LxWxH) in mm
1200
10
New
KSO 750 (230 V) KSO 750 (400 V) KSO 850 (230 V) KSO 850 (400 V)
5900751
5900750
5900851
5900850
970 / 1050 mm
80 mm
750 x 250 mm
300 x 250 mm
2260 x 150 mm
950 / 1030 mm
80 mm
840 x 300 mm
300 x 250 mm
2515 x 152 mm
950 / 1030 mm
80 mm
840 x 300 mm
300 x 250 mm
2515 x 152 mm
820 x 170 mm
950 x 180 mm
950 x 180 mm
110 mm
16.3 m/s
2.2 kW
400 V/50 Hz
100 mm
120 kg
1300 x 750 x
1200
110 mm
16 m/s
2.2 kW
230 V / 50 Hz
100 mm
148 kg
1430 x 600 x
1250
110 mm
16 m/s
2.2 kW
400 V/50 Hz
100 mm
148 kg
1430 x 600 x
1250
Art. no.
2250 x 150 mm, 60 grain 5372306
2250 x 150 mm, 80 grain 5372308
2250 x 150 mm, 100 grain 5372310
2250 x 150 mm, 120 grain 5372312
2250 x 150 mm, 150 grain 5372315
2250 x 150 mm, 180 grain 5372318
2250 x 150 mm, 220 grain 5372322
2250 x 150 mm, 60 grain
5373306
2250 x 150 mm, 80 grain
5373308
2250 x 150 mm, 100 grain 5373310
2250 x 150 mm, 120 grain 5373312
2250 x 150 mm, 150 grain 5373315
2250 x 150 mm, 180 grain 5373318
2250 x 150 mm, 220 grain 5373322
Art. no.
2515 x 152 mm, 60 grain 5918560
2515 x 152 mm, 80 grain 5918580
2515 x 152 mm, 100 grain 5918510
2515 x 152 mm, 120 grain 5918512
2515 x 152 mm, 150 grain 5918515
2515 x 152 mm, 180 grain 5918518
2515 x 152 mm, 220 grain 5918522
2515 x 152 mm, 60 grain 5918660
2515 x 152 mm, 80 grain 5918680
2515 x 152 mm, 100 grain 5918610
2515 x 152 mm, 120 grain 5918612
2515 x 152 mm, 150 grain 5918615
2515 x 152 mm, 180 grain 5918618
2515 x 152 mm, 220 grain 5918622
PU
(10)
(10)
(10)
(10)
(10)
(10)
(10)
(10)
(10)
(10)
(10)
(10)
(10)
(10)
PU
(10)
(10)
(10)
(10)
(10)
(10)
(10)
(10)
(10)
(10)
(10)
(10)
(10)
(10)
XXOscillating sanding belt with separate gear
motor for improved sanding results
XXOscillation can be optionally engaged
XXSanding shoe graphite coated as factory
standard for a longer service life of the
sanding belt
XXHeight-adjustable sanding table utilises the
entire width of the sanding belt
XXHeight-adjustable additional table with
extraction unit for sanding radii
XXAutomatically compensates for bend length
differences through spring-loaded belt
tensioner
Planing
XXThe welded steel machine stand guarantees
a high level of torsion stiffness and
vibration-free processing
XXSanding unit pivotable up to 45° via lever for
sanding straight and bevelled edges
Sanding/grinding
HOLZSTAR edge milling machine KSO 1500 F
Standard edge milling machines with pivoting sanding unit and oscillating sanding belt
for perfect sanding results
Sawing
Height-adjustable additional
table with extraction unit for
sanding radii
Turning
Height-adjustable sanding table
utilises the entire width of the
sanding belt
Scope of supply:
·· Mitre stop
740 / 920 mm
180 mm
750 x 300 mm
330 x 330 mm
2600 x 150 mm
850 x 200 mm
100 mm
20 m/s
3.0 kW
400 V/50 Hz
0.25 kW
120 / 80 mm
180 kg
1720 x 700 x 1030 mm
Extraction
Technical data
Longitudinal table dimensions
Sanding surface
Sanding belt speed
Motor output
Motor output oscillation
Extraction duct Ø
Weight
KSO 1500 F
5901500
incl. mitre stop
Sanding belts KSO 1500 F
2600 x 150 mm, 60 grain
2600 x 150 mm, 80 grain
2600 x 150 mm, 100 grain
2600 x 150 mm, 120 grain
2600 x 150 mm, 180 grain
2600 x 150 mm, 220 grain
Art. no.
5372806
5372808
5372810
5372812
5372818
5372822
PU
(10)
(10)
(10)
(10)
(10)
(10)
11
Workshop equipment
Model
Art. no.
Jointing/thicknessing plane combinations
HOLZSTAR jointing and thicknessing planes ADH 200, ADH 250 and ADH 305
Compact, portable surface and thicknessing plane for DIY and professionals
XXIdeal for mobile use thanks to small and
compact design
XXFor angle joints (90°) and precise surface
planing of solid wood boards, planks and
slats
XXEasy and precise adjustment of chip removal
in precision thicknessing of up to 2 mm
XXAutomatic workpiece feed
XXGeared steel intake roller for even and
constant feeding of the wood
XXRubberised intake and discharge rollers are
gentle on the surface during thicknessing
XXInfinite pivotable aluminium jointing stop
from 0° to 45°
XXJointing table made of milled cast aluminium
XXBlade shaft with 2 HSS planing knives
XXPowerful 230 volt, 1.5 kW motor
XXPluggable chip extraction hood
ADH 200
Includes integrated extraction unit
and chip catchment sack as standard
ADH 200
Converted to thickness planing
Model
Art. no.
Technical data
Max. planing width
Min./max. working height
Max. material removal
Number of planing knives
Planing shaft Ø
Feed speed
Speed
Motor output
Dimensions (LxW) jointing table
Dimensions (LxW) thicknessing table
Rip fence
Extraction duct Ø
Weight
12
ADH 200
5905200
ADH 250
5905250
ADH 305
5905305
204 mm
5 / 120 mm
2 mm
2
50 mm
7 m/min
8500 rpm
1.5 kW
230 V/50 Hz
737 x 210 mm
255 x 204 mm
590 x 102 mm
58 mm
29 kg
790 x 470 x 465 mm
254 mm
6 / 160 mm
2 mm
2
50 mm
7 m/min
8500 rpm
1.5 kW
230 V/50 Hz
1050 x 260 mm
450 x 254 mm
610 x 122 mm
80 mm
40 kg
1105 x 550 x 570 mm
305 mm
6 / 160 mm
2 mm
2
50 mm
7 m/min
9500 rpm
1.8 kW
230 V/50 Hz
1075 x 310 mm
500 x 305 mm
610 x 127 mm
100 mm
42 kg
1135 x 600 x 570 mm
Sanding/grinding
The planer knives are covered
by a guard with a practical quick
clamping mechanism. The desired
chip removal can be set via a convenient hand crank for thickness
planing of up to 2 mm. Easy to
read off on the scale (fig. shows
ADH 250).
In the case of the
ADH 250 and ADH
305, an integrated storage compartment provides storage space. This
means that you can take, e.g., small
operating tools with you in a space
saving way.
Art. no.
5915200
5915250
5915300
5915201
5142427
5142421
13
Workshop equipment
Accessories
Replacement planing knives ADH 200 (PU 2 pc.)
Replacement filter bag ADH 200
Reducing socket Ø60/100
Reducing socket Ø80/100
Extraction
ADH 305
Features an integrated storage compartment
Turning
Sawing
ADH 250
Features an integrated storage compartment
Planing
The aluminium jointer stop is infinitely pivotable through 45°. The
preset angle can be read off on a
scale.
(Fig. shows ADH 250)
Jointing/thicknessing planes
HOLZSTAR jointing/thicknessing plane ADH 260
With 260 mm planing width, incl. chassis
The spring mounted intake rollers prevent indentations on the
wood. The thicknessing table is
guided on four columns.
XXSpace-saving, ideal for DIY enthusiasts and
hobbyists
XXFor angle joints (90°) and precise surface
planing of solid wood boards, planks and
slats
XXEasy and precise adjustment of chip removal
in precision thicknessing of up to 3 mm
XXAutomatic workpiece feed (5 m/min)
XXGeared steel intake roller for even and
constant feeding of the wood
XXA rubberised discharge roller is gentle on the
surface in thicknessing operations
XXEasily-adjustable aluminium jointing stop,
pivotable from 90° to +45°
XXGenerously dimensioned jointing table made
of ribbed cast aluminium
XXBlade shaft with 2 HSS planing knives
XXLarge grey cast iron thicknessing table with
polished surface, 4x bearings
XXEmergency stop switch
XXPowerful 230 volt, 2.0 kW motor
XXIntegrated, pluggable chip extraction hood
Easy and convenient table
height adjustment thanks to
handwheel
Automatic, uniform feed with
anti-kickback device. The geared
infeed roller guarantees a constant wood feed speed.
The pluggable extraction hood is used for
both jointing and thickness planing
The planing knives are adjusted
via the enclosed planing knife
setting gauge.
The aluminium jointer stop is
infinitely pivotable through 45°.
The preset angle can be read off
on a scale.
Incl. carriage
Model
Art. no.
The factory standard chassis
with two steering rollers ensures
ease of transport. To move the
machine, simply step on the
chassis bar, which moves the
rollers down. The chassis is then
returned to its original position
by a spring-loaded bar.
14
Technical data
Dimensions (LxW) jointing table
Dimensions (LxW) thicknessing table
Max. working width
Planing shaft Ø
Planing shaft speed
Feed speed
Speed
Motor output
Extraction duct Ø
Weight
ADH 260
Converted to thickness planing
ADH 260
5903260
1030 x 280 mm
260 x 400 mm
260 mm
3 mm
63 mm
2
6500 rpm
5 m/min
2800 rpm
2.0 kW
230 V/50 Hz
100 mm
66 kg
Scope of supply:
·· Setting gauge
Accessories
Replacement planing knives
(PU 2 pc.)
Art. no.
5913260
Spindle moulder
XXSelector switch for CW or CCW run of the
milling spindle
XXMilling spindle pivots away to the rear for
optimum use of a feed device, maximum
safety, and a cleaning milled finish
XXHold-down unit for precise workpiece
guidance
XXDelivery table available as an accessory
Milling spindle pivots away to the
rear for optimum use of a feed device,
maximum safety, and a cleaning milled
finish
Planing
XXEasy action sliding carriage for precise
workpiece guidance
XXMilling stop with finely adjustable aluminium
stops
XXFast and easy speed change thanks to
multiple V belt
XXLarge work area thanks to solid, torsion-free
grey cast iron table
XXGenerously dimensioned milling machine
made of grey cast iron, pivotable from +5 to
-45°
Sanding/grinding
HOLZSTAR spindle moulder TF 200 SE
Spindle moulder with aluminium sliding carriage and pivoting milling spindle
Milling stop with finely adjustable
aluminium stops
Fast and easy speed change thanks to
multiple V belt
Turning
Sawing
Hold-down unit for precise
workpiece guidance
Scope of supply:
·· Mitre stop
·· Hold-down unit
·· Milling guard hood
1000 x 240 mm
100 mm
5° to -45°
180 mm
30 mm
1800 / 3000 / 6000 / 9000 rpm
400 V/50 Hz
2.8 kW
100 mm
900 mm
1000 x 850 x 1200 mm
218 kg
Extraction
Technical Data
Dimensions of alum. sliding carriage
Usable spindle length
Spindle angle
Tool Ø max. retractable
Milling spindle Ø
Spindle speed
Motor output
Extraction port Ø
Working height
Weight
TF 200 SE
5902000
Accessories
Delivery table for TF 200 SE
Art. no.
5912000
15
Workshop equipment
Model
Art. no.
Universal multiple combination
HOLZSTAR Universal multiple combination UMK 6
The entry-level solution for sawing, milling, jointing, thicknessing, and slot mortising
XXWith sliding carriage for safe and easy
workpiece guidance during sawing and milling
XXVersatile adjustable angle and stop rails for
precision work
XXWith extraction unit connection option for
clean work
Model
Art. no.
Technical data circular saw
Sliding carriage dimensions
Sliding carriage stroke
Max. saw blade diameter
Saw blade speed
Max. cutting height
Work table dimensions
Jointing
Working width
Jointing table length
Planing shaft speed
Thicknessing
Table length
Clearance width
Min./max. clearance height
Feed speed
16
XXPractical machine chassis available as an
option for easy and fast displacement of the
machine, and an optimum working height
XXSuitable for mobile use on the construction
site, or stationary use in the workshop
UMK 6
5905600
120 x 740 mm
500 mm
200 mm
4200 rpm
65 mm
620 x 300 mm
154 mm
620 mm
1.5 mm
6000 rpm
2
320 mm
154 mm
9 / 92 mm
1.0 mm
7 m/min
Spindle moulder
Spindle holder
End mill chuck
Spindle height adjustment
Spindle speed
General Information
Motor output
Weight
Extraction duct diameter
Extraction duct thickness
Extraction duct Ø Saw blade protection
Slot mortising unit
Work table
Chuck clamping range
Chuck for slot mortising unit
Slot height
Transverse stroke (drilling width)
Longitudinal stroke (drilling depth)
12 mm
6/8 mm
0 - 42 mm
9000 rpm
1.0 kW
230 V/50 Hz
52 kg
880 x 835 x 345 mm
58 mm
50 mm
21 mm
260 x 125 mm
13 mm
6 / 8 / 10 mm
95 mm
60 mm
45 m
UMK 6
Figure shows
optional chassis
Sanding/grinding
Turning
Thicknessing planes
·· Workpieces up to 92 mm height can
be planed with the thicknessing
feed
·· Convert from jointing to thickness
planing in just a few actions
Fig. shows accessory machine chassis with
carriage
Sawing unit
·· Saw including practical mitre stop
·· Stop for parallel cut included
·· With saw blade 200 mm Ø for
max. 65 mm cutting height
Art. no.
5260200
5916000
5916002
5916005
Slot mortising unit
·· an easy option for creating grooves,
mortises and plug joints
17
Workshop equipment
Extraction
Scope of supply:
·· 2-blade planing shaft
·· Set of planing knives (2 pcs.)
·· Saw blade 200 x 30 x 2.6 mm, Z20
·· Sliding carriage for saw and end mill
·· Multifunctional stop for parallel cutting
and jointing
·· Mitre stop
·· Slot mortising unit with clamping arm
·· Workpiece pusher
Accessories
Carbide saw blade 200 x 30 x 2.8 mm, Z24
Set of planing knives for UMK 6 (2 pcs.)
Slot mortising set Ø 6, 8, 10 mm
Machine chassis with carriage
Sawing
Jointing plane
·· Featuring 2-blade planing shaft as
factory standard
·· Easily-adjustable aluminium
jointing stop, pivotable from 90°
to +45°
Planing
Spindle moulder
·· For jointing and profiling slats and
boards
·· With sliding carriage for safe and
easy workpiece guidance
Mitre saws with pull function
HOLZSTAR KGZ 305 E
Mitre saw with pull function – for versatile and mobile use
XXFeatures soft start
XXBase plate and rotating platen made of die
cast aluminium, compact, rugged and easy to
transport at the same time
XXLaser projection on the workpiece for precise
control of the cutting position
XXInfinitely adjustable double mitre and double
angle
XXAdjustable stop rails and laterally extendable
support aids for longer workpieces
XX2x adjustable cutting depth limiter with an easily
convertible stop
XXWith pull function for an extended cutting range
XXWith·C-clamp and clamping device as factory
standard to safely hold the workpiece
XXWith extraction duct for a dust collection bag or
connecting an external extraction unit
Double angle
·· With double angle and double
mitre as a factory standard
2x adjustable cutting
depth limiter
Cut laser for
checking the cut
position
Screw clamp for
workpiece clamping
Extendable stop
rails right and left
Model
Art. no.
With·screw clamp for
safe workpiece fixing
as factory standard
KGZ 305
5702305
Technical data
Motor output
2.0 kW
230 V
Saw blade speed
4500 rpm
Saw blade ø
305 mm
Cutting capacity for angle/mitre (height x width)
At 0°/0°
100 x 340 mm
At 45°/0° left
40 x 340 mm
At 45°/0° right
40 x 340 mm
At 0°/45° left
100 x 240 mm
At 45°/45° left
40 x 240 mm
At 45°/45° right
40 x 240 mm
Weight
23 kg
Dimensions L max x W max x H
835 x 570 x 790 mm
18
·· With·C-clamp and clamping device
as factory standard to safely hold the
workpiece
·· Laser projection on the workpiece for
precise control of the cutting position
Scope of supply:
·· C-clamp
·· Clamping device
·· Dust-collection bag
·· Saw blade Ø 305 x 3.2 x Ø 30 mm Z48
Accessories
Art. no.
Saw blade 305 x 3.2 x 30, 60 TPI angled teeth neg. 5°
perfect for panels
5260306
Saw blade 305 x 3.2 x 30, 72 TPI TF neg.
for non-ferrous metals, plastic profiles
5260305
HOLZSTAR Mobile table saw TKS 255 M
The compact table saw for mobile use. Ideal for the
hobby workshop and DIY enthusiast.
XXWith workpiece pusher for safe and easy workpiece
guidance during sawing and milling
XXVertical storage possible thanks to integrated feet
XXThe optional, folding feet allows user to quickly
set up the machine without tools for an optimum
working height; they simply fold in for transport or
space-saving storage
Saw blade height adjustment via
handwheel
Fast width extension of the work
table without needing tools
Planing
XXSuitable for mobile use, or stationary use in the
workshop
XXEasy to move thanks to integrated chassis with
transport rollers and pull-out handle
XXThe height and angle of sawing unit can be adjusted
from the operator side using a handwheel
XXThe chip collection sack pulls out and can be quickly
and easily emptied using a zipper
Sanding/grinding
Mobile table saw
Sawing
Integrated chip sack with practical
table extension
Saw blade inclination angle
adjustable via handwheel
Turning
Practical:
TKS 255 M incl. folding
chassis
TKS 255 M
5902255
* Chassis as accessory
255 mm
80 / 56 mm
620 mm
90° - 45°
60° (left/right)
640 x 730 mm
380 mm
800 mm
4500 rpm
1.8 kW
230 V/50 Hz
32 kg
760 x 800 x 500 mm
Space-saving storage
Scope of supply:
·· Mobile table saw TKS 255 M incl. wheeled
chassis
·· Carbide saw blade 254 mm / Z36
·· Table width and length extension
·· Rip fence
·· Mitre stop
·· Chip bag
·· Workpiece pusher
·· Folding chassis
Accessories
Saw blade 254 x 30 x 2.6 mm, Z36
Dust collection bag
Art. no.
5912255
5912256
Rip fence with eccentric quick
coupling, easily and precisely
adjustable via scale
Extraction
Easy to transport
Technical data
Max. saw blade Ø
Max. cutting height 90°/45°
Max. cutting width with stop
Saw blade angle
Mitre stop
Table dimensions (L x W)
Table height without chassis
Table height with chassis*
Speed
Motor output
Weight
Mitre stop and workpiece pusher with
practical holders
19
Workshop equipment
Model
Art. no.
Table saws
HOLZSTAR table saw TKS 315 E
Deployable as a table saw for interior fitting out or as a site table saw
XXGenerously dimensioned steel machine table,
galvanized as a factory standard to prevent corrosion
XXSaw blade pivots from 0° to 45°; adjustable without
tools via star handle bolts
XXSaw blade height adjustment via handwheel and scale
XXLarge aluminium rip fence with eccentric quick release
XXEasy to move thanks to integrated chassis with
transport rollers and folding handles
XXScope of supply incl. carbide saw blade
Ø 315 mm / Z24
XXMachine not preassembled
The rip fence is designed for
peeling boards, rip cutting,
bevelling, and angled cutting
Sliding carriage with
ball-bearings, infinitely
adjustable from -45° to +45°
with quick release lever
Easy height and angle adjustment
of the sawing unit with a simple
handwheel and star wheel bolts
Easy and precise setting of
the rip fence via scale with
eccentric quick coupling
TKS 315 E
Figure shows factory standard
table extension, sliding carriage
with mitre stop and second
aluminium stop
Easy to move thanks to
integrated chassis with
transport rollers and
folding handles
Model
Art. no. (230 V)
Technical data
Max. saw blade Ø
Saw blade angle
Table dimensions
Table height
Speed
Motor output
Extraction port Ø
Weight
20
TKS 315 E (230 V)
5903315
TKS 315 E (400 V)
5903316
315 mm
83 / 60 mm
90° - 45°
800 x 550 mm
800 mm
2800 rpm
2 kW/2.8 kW
230 V/50 Hz
top: 38 mm/bottom: 100 mm
53 kg
315 mm
83 / 60 mm
90° - 45°
800 x 550 mm
800 mm
2800 rpm
2.8 kW/2.8 kW
400 V / 50 Hz
53 kg
Scope of supply:
·· Chassis
·· Sliding carriage
·· Table width/length extension
·· Rip fence
·· Carbide saw blade Ø 315 mm / Z24
·· Saw blade protective hood with
extraction hose
Accessories
Cross cutting replaceable saw
blade 28 teeth, Ø 315 mm
Art. no.
5263128
Table saws
XXSaw blade height adjustment also via
handwheel from the operator side
XXThe stable sawing unit mounts at the front
and rear allow for precise cutting.
XXPowerful industrial motor with brake;
designed for continuous operation
XXThanks to the powerful motor, hardwood can
be processed with ease
XXIncl. saw blade protective hood with
integrated extraction duct
XXEasy to move thanks to integrated chassis
with transport rollers and folding handles
XXLocking switch/connector combination
XXThe folding feet and fast release screws
allow fast and easy folding of the machine for
transport or space-saving storage
Planing
XXGenerously dimensioned steel machine table,
galvanized as a factory standard to prevent
corrosion
XXThe factory standard table length extension
can also be fitted on the right as a table width
extension.
XXSaw blade pivots from 0° to 45°, precisely
and easily adjustable to a single degree of
accuracy via handwheel and scale
XXLarge central extraction duct Ø 100 mm
Sanding/grinding
HOLZSTAR table saw TKS 315 Pro – premium, precision table saw.
Universally deployable for interior fitting out or as a site table saw
The rip fence is designed for
peeling boards, rip cutting, bevelling,
and angled cutting
Model
Art. no.
The switch/plug combination with
emergency stop switch is lockable. The
TKS 315 Pro is available in 230-volt or
400-volt versions.
TKS 315 Pro (230 V)
5903251
Technical data
Max. saw blade Ø
315 mm
90 / 50 mm
Saw blade angle
90° - 45°
Table dimensions (L x W)
800 x 550 mm
Table height
810 mm
Speed
2800 rpm
Motor output
2.2 kW/2.8 kW
230 V/50 Hz
Extraction duct Ø
Net weight
44 kg
Dimensions (LxWxH)
2000 x 1360 x 1000 mm
Features precise, easy-action height and
angle adjustment of the sawing unit thanks
to easy to use handwheels.
TKS 315 Pro (400 V)
5903253
315 mm
90 / 50 mm
90° - 45°
800 x 550 mm
810 mm
2800 rpm
2.2 kW/2.8 kW
400 V/50 Hz
44 kg
2000 x 1360 x 1000 mm
Extraction
Scope of supply:
·· Chassis
·· Sliding carriage
·· Table extension
·· Rip fence
·· Carbide saw blade Ø 315 mm / 36 Z
extraction hose
·· Mitre stop without aluminium profile
(profile available as accessory)
Turning
TKS 315 Pro (400 V)
Figure with table extension
accessory and aluminium
profile on mitre stop (not
included)
Accessories
Cross cutting replaceable saw
blade 28 teeth, Ø 315 mm
Additional table extension right,
800 x 550 mm
Alum. profile for mitre stop
Art. no.
5263128
5913251
5910315
21
Workshop equipment
Ball-bearing mounted sliding
carriage with mitre stop,
continuously adjustable
from -45° to +45° with quick
release lever
Sawing
The rip fence with eccentric quick
release can be precisely and easily
adjusted thanks to the scale.
Table saws
HOLZSTAR table saw TKS 250 SC
Ideal for beginners and demanding DIY enthusiasts.
XXVery robust and precise design with premium
sliding carriage
XXThe heavyweight grey cast iron table allows
for low-vibration work and precise, straight
cuts
XXFactory standard sliding carriage with ball
bearings and bolt-on clamp sleigh
XXPivoting, pull-out telescope stop up to 228
mm, stop rail for mitre cuts on both sides, 45°
XXWith optical magnifying lens on telescope
stop
XXMitre stop adjustable from -45° to +45°
XXSaw blade pivots from 0° to 45°, easily
adjustable via gear rack mechanism with
rotary knob and scale
XXSaw blade height adjustment is via
handwheel from the operator side
XXLarge aluminium rip fence with rod guides and
eccentric quick coupling
XXPowerful industrial motor with brake;
designed for continuous operation
XXLarge central extraction duct (Ø 100 mm)
integrated extraction duct ø 38 mm
XXIncluding carbide saw blade ø 250 mm / 36 Z
XXLocking switch/connector combination
Scope of supply:
·· Sliding table with extension
·· Clamp sleigh
·· Rip fence
extraction hose
·· Table width extension with support foot
·· Carbide saw blade 250 mm / Z36
Model
Art. no.
TKS 250 SC (230 V)
5900256
TKS 250 SC (400 V)
5900255
Technical data
Max. saw blade Ø
254 mm
254 mm
42 / 80 mm
42 / 80 mm
900 mm
900 mm
Saw blade angle
90° - 45°
90° - 45°
Mitre stop
45° (left/right)
45° (left/right)
Table (LxW)
800 x 348 mm
800 x 348 mm
Table height approx.
895 mm
895 mm
Trimming length
1300 mm
1300 mm
Table length extension (L x W)
800 x 355 mm
800 x 355 mm
Speed
4000 rpm
4000 rpm
Motor output
2.5 kW
2.5 kW
230 V / 50 Hz
400 V/50 Hz
Extraction duct Ø
top: 38 mm/bottom: 100 mm top: 38 mm/bottom: 100 mm
Weight
190 kg
190 kg
Dimensions (LxWxH)
950 x 760 x 1030 mm
950 x 760 x 1030 mm
22
With folding magnifying lens on cross cut stop. Allows for
precise reading of the desired setting.
Sanding/grinding
The saw blade pivots through
45°.
The cross cut stop supports mitre
cuts on both sides, 45°
Accessories
Art. no.
Angle stop for TKS 5910259
250 SC
Chassis
5910258
Angle stop
TKS 250 SC
Turning
Chassis
TKS 250 SC
Sawing
Planing
Precise, easy-action height and
angle adjustment of the sawing
unit via easily operable handwheels.
(1)
(2)
(3)
(4)
250
30
3.0
80
5262581
Pivoting telescope stop on sliding
carriage; extendable to 2280 mm,
and foldable
23
Workshop equipment
HOLZKRAFT saw blades for TKS 250 SC
Diameter
Cutting width
Teeth
Art. no.
Drill hole
mm
mm
mm
(1) Cross-cutting flat toothed circular saw blade for all round use
250
30
3.2
18
5262518
(2) Cross-cutting replaceable circular saw blade for rip and cross cutting solid wood and board materials; chip
thickness limitation reduces blade break-out due to loose knots and other inclusions
250
30
3.2
24
5262524
(3)Peeling and finish cut circular saw blade for finish cutting of solid wood and other materials
250
30
3.2
40
5262542
(4) Special sliding and peeling circular saw blade for board materials, covered with veneer, plastic, melamine, paper, etc.; 30° replaceable teeth, and negative rake angle guarantee tear-out free cutting without
using a scoring unit, noise-damping thanks to special laser elements for noise reduction
Extraction
With two lateral extraction ports
(Ø 100 mm)
Panel saws
HOLZSTAR sliding table saw FKS 315-1500 E
Robust and precise design with sliding carriage
XXThe grey cast iron work table allows for lowvibration work
XXExtendable telescopic stop, pivots from -45°
to +45°
XXSaw blade pivots from 0° to 45° via
handwheel and scale
XXSaw blade height adjustment via handwheel
XXLarge central extraction duct Ø 100 mm
integrated extraction duct ø 38 mm
Saw blade pivots from 0° to 45°,
easily adjustable via gear rack
mechanism with rotary knob and
scale
Large aluminium rip fence with rod
guides and fine adjustment
Model
Art. no.
Technical data
Max. saw blade Ø
Max. scoring saw blade
Saw blade angle
Table dimensions
Table height
Trimming length
Table extension
Table width extension
Saw blade speed
Scoring blade rotational speed
Motor output
Extraction duct Ø
Weight
24
FKS 315-1500 E
5900315
315 mm
100 / 75 mm
940 mm
90° - 45°
760 x 350 mm
870 mm
1370 mm
350 x 500 mm
600 x 760 mm
4250 rpm
3.0 kW
400 V/50 Hz
38 mm/100 mm
260 kg
3480 x 2430 x 1270
Scope of supply:
·· Sliding carriage with boom
·· Clamp sleigh
·· Rip fence with rod guide and fine
adjustment
extraction hose
(1)
(2)
HOLZKRAFT saw blades for FKS 315-1500 E
Diameter mm
Cutting width
Teeth
Art. no.
Drill hole
mm
mm
(1) Cross-cutting replaceable circular saw blades for rip and cross cutting of solid wood and board materials.
Chip thickness limitation reduces blade break-out due to loose knots and other inclusions.
315
30
3.2
28
5263128
(2)Peeling & finish cutting circular saw blades for finish cutting of solid wood & various materials
315
30
3.2
48
5263148
315
30
3.2
60
5263160
Sliding table saws with scoring unit
XXSaw blade pivots from 0° to 45° via handwheel
and scale
XXStable sawing unit guarantees vibration-free
and precise work
XXSolid extension table with roller and telescope
arm for maximum stability
XXMitre stop and hold-down unit sliding across
entire carriage length
XXPowerful drive motor for constant cutting
speed, even at 100 mm cutting height
XXGenerously dimensioned work table and
factory standard table extension for cutting
widths up to 1220 mm
Planing
XXWith scoring unit as factory standard
XXExtendable telescopic stop, pivots from -45° to
+45° with finely-adjustable flip stop
XXRobust and precise design with sliding carriage
XXThe grey cast iron work table allows for lowvibration work
XXSaw blade height adjustment via handwheel
Sanding/grinding
HOLZSTAR sliding table saw FKS 315-2000 E
Robust and precise design with sliding carriage and scoring unit
315 mm
90 mm
100 / 80 mm
1220 mm
90° - 45°
680 x 580 mm
870 mm
2000 mm
310 x 500 mm
440 x 800 mm
4000 rpm
5800 rpm
4.0 kW
400 V/50 Hz
38 mm/100 mm
260 kg
4330 x 4155 x 1150
(1)
(2)
Scope of supply:
·· Sliding carriage with boom
·· Material roll on boom
·· Rip fence with rod guide and fine
adjustment
·· Table extension
·· Table width extension
·· Flip stop
·· Clamp sleigh
·· Eccentric clamp
·· Scoring unit
extraction hose
Extraction
Technical data
Max. saw blade Ø
Max. scoring saw blade
Saw blade angle
Table dimensions
Table height
Trimming length
Table extension
Rear table
Steel extension table
Saw blade speed
Scoring blade rotational speed
Motor output
Extraction duct Ø
Weight
FKS 315-2000 E
5900317
HOLZKRAFT saw blades for FKS 315-2000 E
Diameter mm
Cutting width
Teeth
Art. no.
Drill hole
mm
mm
(1) Cross-cutting replaceable circular saw blades for rip and cross cutting of solid wood and board materials. Chip thickness limitation reduces blade break-out due to loose knots and other inclusions.
315
30
3.2
28
5263128
(2)Peeling & finish cutting circular saw blades for finish cutting of solid wood & various materials
315
30
3.2
48
5263148
315
30
3.2
60
5263160
25
Workshop equipment
Model
Art. no.
Turning
Sawing
Large aluminium rip fence with rod
guides and fine adjustment
Band saws
HOLZSTAR HBS series wood band saws
Reliable band saws for precise work
XXTorsion-resistant design
XXExcellent stability on the smallest possible
footprint
XXFast and clean sawing of wood, plastic and
non-ferrous metals
XXThe heavy cast iron work table with its
polished surfaces pivots
from 0 to 45°
XXPowerful motor
XXSafety switch shuts down the motor on
opening the door, thus preventing undesirable
post-run and start-up
XXWith precision 3 roller saw band guide at top
and bottom
The 3 roller saw band guide at the
top and bottom reduces friction, is
precise and easily adjustable.
HBS 251 and HBS 351-2
XXIdeal for demanding model makers and DIY
enthusiasts.
XXAluminium rip fence with eccentric quick
release and scale
XXThe rocker-mounted saw table is continuously
tilting from 0-45° with a scale to show the set
angle of inclination
XXPrecision-mounted flywheels made of die cast
aluminium with special coating for a longer
saw band service life
XXThe saw band can be centred by changing the
tracking at the rear
XXWithout angle stop and without chassis
The aluminium rip fence with
eccentric quick release clamp is
easily and precisely adjustable.
The preset value can be easily
read off via an integrated
magnifying lens in combination
with a millimetre scale.
HBS 351-2
Rear view
with saw table
pivoted
2-stage speed adjustment for the HBS
351-2 is handled manually by shifting
the belt. Equipped with chip brushes
for clean drive wheel surfaces.
Scope of supply HBS 251 and HBS 351-2:
·· Without angle stop and without
chassis
Model
Art. no.
Technical data
Flywheel Ø
Max. cutting width*
Max. cutting width**
Max. cutting height
Cutting speed
Saw blade length
Table size
Motor output
Extraction duct Ø
Weight
Dimensions in mm
*with stop ** without stop
26
HBS 251
Fig. shows internal view
with optional accessories (chassis)
HBS 351-2
Fig. shows internal view
with optional accessories
(chassis)
HBS 351-2
Standard design with
optional angle stop
HBS 251
5900251
HBS 351-2
5900351
HBS 400
5900410
HBS 471
5900471
HBS 473
5900473
250 mm
121 mm
245 mm
120 mm
696 m/min
1790 mm
290 x 290 mm
350 W
230 V/50 Hz
58 mm
32 kg
520 x 450 x 880
350 mm
299 mm
345 mm
200 mm
438 / 900 m/min
2490 mm
548 x 400 mm
1000 W
230 V/50 Hz
100 mm
70 kg
750 x 630 x 1150
426 mm
266 mm
416 mm
305 mm
460 / 980 m/min
3378 mm
530 x 480 mm
1500 W
230 V/50 Hz
2 x 100 mm
135 kg
765 x 520 x 1750
470 mm
390 mm
465 mm
285 mm
460 / 980 m/min
3455 mm
535 x 485 mm
1500 W
230 V/50 Hz
100 mm
146 kg
800 x 490 x 2000
470 mm
390 mm
465 mm
285 mm
460 / 980 m/min
3455 mm
535 x 485 mm
1500 W
400 V/50 Hz
100 mm
146 kg
800 x 490 x 2000
HBS 400 and HBS 471-473
XXProfessional band saw with closed chassis
XXQuick clamping of saw band via eccentric lever on
rear of machine without changing the basic tension
setting
XXGrey cast iron flywheels ensure smooth action
XXEasy pivoting of the table from 0 to 45° via rocker
mount
XXTwo-speeds as factory standard
XXPreset cutting width can be easily read off
on a scale.
XXSuitable for saw blade widths from 6 to 25 mm
XXHBS 400: Including easy-action aluminium rip fence
with quick lock on solid rod guide
XXHBS 471/473: Aluminium rip fence with eccentric
quick release and scale
The aluminium stop can be converted within seconds using the
quick release lever for working
with a flat stop
Planing
Grey cast iron
flywheels ensure
smooth action
Sanding/grinding
HBS 400
Integrated saw blade
guide display
The saw table can be
pivoted from 0° to 45°
thanks to its rocker mount
HBS 471-473
Two speeds selectable via
v-belt adjustment
Sawing
Scope of supply
HBS 400/HBS 471/HBS 473:
·· Incl. saw blade
·· Aluminium rip fence
HBS 400
The saw belt tension can be read
off externally thanks to a view
pane integrated in the door.
HBS 473
Saw blade quality
Made in Germany
variable use
*Teeth per inch
5160250
5160251
5160252
5160351
5160352
5160353
5160354
5160401
5160402
5160403
5160404
5160405
5163806
5163810
5163815
5163820
5163825
UF 230
Wheels rotate through 360°
Accessories
Universal wheeled chassis UF 230
Load-bearing capacity 230 kg
Weight 7.7 kg
Max. size 1290 x 480mm
Angle stop for HBS 251
Angle stop for HBS 351-2
Chassis for HBS 251
Chassis for HBS 351-2
Reducing socket Ø 60/100 mm
Angle stop
HBS 251
Angle stop
HBS 351-2
Art. no.
6190230
5910810
5910814
5910411
5910814
5910814
5910813
5910812
5142427
Reducing
socket
Extraction
Art. no.
HBS 471-473
Precision 3-roller guide with fine
adjustment as factory standard
27
Workshop equipment
Accessories
Belt length
Saw bands for HBS 251
mm
6.0 x 0.65 x 1790 mm /14 TPI*
1790
6.0 x 0.65 x 1790 mm /6 TPI*
1790
12.0 x 0.4 x 1790 mm /4 TPI*
1790
Saw bands for HBS 351-2
6.0 x 0.65 x 2490 mm /14 TPI*
2490
6.0 x 0.65 x 2490 mm /6 TPI*
2490
12.0 x 0.5 x 2490 mm /4 TPI*
2490
16.0 x 0.5 x 2490 mm /4 TPI*
2490
Saw bands for HBS 400
6.0 x 0.65 x 3378 mm /6 TPI*
3378
10.0 x 0.5 x 3378 mm /4 TPI*
3378
16.0 x 0.5 x 3378 mm /4 TPI*
3378
20.0 x 0.5 x 3378 mm /4 TPI*
3378
25.0 x 0.5 x 3378 mm /4 TPI*
3378
Saw bands for HBS 473 for wood
6.0 x 0.6 x 3455 mm /6 TPI*
3455
10.0 x 0.5 x 3455 mm /4 TPI*
3455
16.0 x 0.5 x 3455 mm /4 TPI*
3455
20.0 x 0.5 x 3455 mm /4 TPI*
3455
25.0 x 0.5 x 3455 mm /4 TPI*
3455
Turning
HBS 400
Jig saws
HOLZSTAR jig saw DKS 502 Vario – Jig saw with infinitely adjustable
stroke control. Ideal for all fine sawing work.
XXUniversally deployable in mould making,
precision mechanics, model making, toy
making, at schools and training workshops,
for designers and architects as well as crafts
professionals and DIY enthusiasts
XXFor machining softwood, plastics, and similar.
XXThe large reach also allows larger workpieces
to be processed
XXWork table pivots from -45° to 0°
XXThe robust cast iron design guarantees
smooth, low-vibration action
The large table pivots from -45° to
0°. The angle of inclination can be
read off on a scale.
XXThe integrated dust blowing device removes
the dust particles from the cutting line during
cutting
XXThe transparent saw blade guard is height
adjustable for optimum safety
XXWith flexible LED lamp for optimum
illumination of the cutting area
XXFits any workbench or work top thanks to
compact design
D
Now with LE
lamp
The integrated dust
blowing device removes
the dust particles during
cutting
Ideal for all fine sawing work.
appro
x. 400
mm
Max. 50 mm
The transparent saw blade
guard is height adjustable
and individually adjustable
to suit the workpiece. It
provides optimum protection while guaranteeing
an unobstructed view. The
saw blade is completely
protected.
For wood workpieces with a thickness of up to 50 mm
Vario design with continuously variable stroke control
via rotary knob on front of
machine
Work table pivots from
-45° to 0°
With flexible LED lamp for optimum
illumination of the cutting area
Model
Art. no.
Technical data
Max. cutting height at 90°
Max. cutting height at 45°
Reach
Saw blade length
Stroke speed
Table size
Motor output
Extraction duct Ø
Weight
28
0°
DKS 502 Vario
5900504
50 mm
27 mm
approx. 400 mm
133 mm
700 - 1400 rpm
380 x 250 mm
120 W
230 V
38 mm
12 kg
610 x 310 x 290 mm
Flexible LED lamp
°
45
With integrated extraction
duct for connecting an
external extraction device.
Freely oscillating saw blade mount for standard saw blades with cross pin
1
Made in Germany
2
3
Pin saw blades
1) For wood, plastic, plaster
135 x 3.0 x 0.25 mm
2) For wood
135 x 6.0 x 0.4 mm
3) For metal
135 x 6.0 x 0.4 mm
Z/cm PU
Art. no.
6
10
pcs. 5911628
6
6
pcs. 5911660
6
12
pcs. 5911661
Small-scale lathes
XXTorsion-resistant grey cast iron machine bed
for smooth, precision running
XXTailstock and headstock also made of
stable grey cast iron
XXIncl. easily adjustable turning tool support
XXOptionally available with peak width of
1000 mm
Sanding/grinding
HOLZSTAR small-scale lathe DB 450
Compact design for DIY enthusiasts and professionals
XXTailstock (stroke 50 mm) with travelling centre
punch as factory standard
XXTailstock quill with drill hole for machining
longer workpieces
XXSpeed adjustment, 5-stage via V-belt
XXParticularly quiet and smooth action
With a view window for checking
the selected speed on the V-belt
pulley. Easy shifting of the V-belt
via levers.
1000 mm
The grey cast iron tailstock is quickly and easily fixed in place using
a clamping lever. The quill is adjusted by means of a handwheel.
Planing
Smooth
running!
450 mm
Sawing
DB 450
With optional table extension to a max.
width of 1000 mm, Art. no. 5920451,
Turning
DB 450
On a lathe by
HOLZKRAFT
DB 450
Standard equipment
1
254 mm
127 mm
450 / 1000* mm
M33 x 3.5
680, 1000, 1400, 2000, 2800 rpm
5
370 W
230 V / 50 Hz
MK 2
35 kg
820 x 430 x 300 mm
* optionally with bed extension accessory Art.no. 592 0451
Extraction
Technical data
Max. turning Ø
Max. height
Max. width
Spindle head thread
Speeds
Speed stages
Motor output
Morse cone
Weight
Dimensions
DB 450
5920450
2
3
Accessories
1)4-jaw chuck set 1 Ø 100 mm, M33 x 3.5
3)8-part turning tool set
Art. no.
5931021
5931023
5931011
29
Workshop equipment
Model
Art. no.
Lathes
HOLZSTAR lathes DB 900 and DB 1100
Variable-speed lathes for DIY enthusiasts and professionals
XXTorsion-resistant grey cast iron machine bed
for smooth, precision running
XXTailstock and headstock made of
XXWide, easily adjustable turning tool support
XXHeadstock with quick release lever and
handwheel
XXTailstock (stroke 50 mm) with travelling centre
longer workpieces
XXVariable speed control from 500-2000 rpm
with digital speed display
DB 900
Standard equipment
DB 1100
Standard equipment
Scope of supply DB 900 and DB 1100:
·· Face plate Ø 15 cm
·· Travelling tailstock quill
·· Machine chassis
·· Four-pronged face tang
Model
Art. no.
Technical data
Max. turning Ø
Max. height
Max. width
Spindle head thread
Speeds
Speed stages
Motor output
Morse cone
Weight
Dimensions
30
XXThe headstock rotates through 180°
XXIdeal for turning larger diameters
XXLockable emergency stop switch
Fixed steady DB 900/1100
For machining longer workpieces and
preventing oscillation and chatter
marks on the lathed part in progress.
DB 900
5920900
DB 1100
5921100
306 mm
153 mm
900 mm
M33 x 3.5
500 - 2000 rpm
Variable, 10 stages
550 W
230 V/50 Hz
MK 2
80 kg
1380 x 330 x 370 mm
358 mm
179 mm
1100 mm
M33 x 3.5
500 - 2000 rpm
Variable, 10 stages
750 W
230 V/50 Hz
MK 2
92 kg
1620 x 340 x 430 mm
Copy device for DB 900/1100
Time-saving manufacturing of dimensionally identical workpieces with
identical profiles, comprising a stable, torsion-resistant aluminium profile
carrier and a grey cast carriage with steel guide rails.
Accessories
Fixed steady DB 900
Fixed steady DB 1100
Copy device for DB 900
Art. no.
5931050
5931030
5931101
5931102
Sanding/grinding
A digital display shows the
currently selected speed.
The headstock on the
DB 900 and DB 1100 can
be rotated through 360°
and stopped at 45°, 90°
and 180°.
With travelling centre
A copy device is optionally
available for the DB 900 and
DB 1100. For rational copying
of original parts, or working
with templates.
Vario speed control from 500 2000 rpm via V-belt and adjustable cone plates.
Planing
On all models, the
tailstock is quickly and
easily clamped on the
machine bed with a
single lever clamp.
The desired speed is easily and
quickly set using a lever on the
operator side.
The headstock can be pivoted for
turning workpieces in cross grain
operations that are larger than the
inside dimension of the lathe.
The bed extension in combination
with the convertible manual tool
support ensure maximum flexibility.
DB 1100
Fig. with factory standard grey cast chassis and
optional copy device (Art. no. 5931102)
2
3
Turning tool set
8-part
4-jaw chuck set 1
Ø 100 mm with
screw insert
Accessories
1)8-part turning tool set
4)External turning device DB 1100
Art. no.
5931011
5931021
5931023
5931052
Extraction
4-jaw chuck set 2 Ø
100 mm with replaceable jaws and screw
insert
4
Solid steel design only for
manual lathes with rotatable
headstock.
The headstock on the DB 1100
can also be laterally displaced
and fixed at any point on the
lathe bed.
31
Workshop equipment
1
Turning
Sawing
Grey cast chassis for even smoother
action.
Lathes
HOLZSTAR lathe DB 1202
Lathe with continuously variable speed control
XXThe torsion-resistant grey cast iron machine
bed ensures smooth, precision running
XXThe tailstock and headstock are made of
XXThe drive can be freely displayed on the lathe
XXHeadstock with quick release lever and
handwheel
XXTailstock with travelling centre punch as
factory standard
longer workpieces
XXVariable speed control from 0 - 3200 rpm in
two speed stages: 0-1200 and 0-3200 rpm
Variable speed control from 0 1200 rpm (L) and 0 - 3200 rpm
(H) in two speed stages.
With travelling centre punch
as factory standard
A digital display shows the
currently selected speed.
2
3
Maximum length of workpie
ce
1,185 mm
The tailstock is easily and
quickly clamped on the
machine bed thanks to single lever clamping
1
(1)Frequency inverter for continuous speed control
(2)Motor circuit switch
(3)Switch for selecting clockwise or anti-clockwise run
(4)With emergency stop
switch
Grey cast chassis for even
smoother action.
No tools required to change the
gear ratio due to easy shifting of
the V-belt
Fig. with optional tool holder Art. no. 5931051
Model
Art. no.
The headstock can be pivoted for
turning workpieces in cross grain
operations that are larger than the
inside dimension of the lathe.
The optional bed extension in combination with the convertible manual tool support ensure maximum
flexibility.
32
Technical data
Max. turning Ø
Max. height
Max. width
Spindle head thread
Speeds
Speed stages
Motor output
Morse cone
Weight
Dimensions
DB 1202
5921202
460 mm
230 mm
1,185 mm
M33 x 3.5
0 - 3200 rpm
Variable, 2 stages
1.5 kW
230 V/50 Hz
MK 2
185 kg
2060 x 500 x 1200 mm
Optional accessories
External turning device for machining large diameters
Art no. 5931053
Accessories
Tool holder for DB 1202
External turning device f.
DB 1202
Art. no.
5931051
5931053
5931060
Lathe accessories
Art. no.
5931023
Mount external clamping area:
51 mm / 78 mm
50 mm / 90 mm
Mount internal clamping area:
40 mm / 63 mm
38 mm / 73 mm
XXCentric clamping
4-jaw chuck set 1 Ø 150 mm, M33 x 3.5
Art. no.
5931020
42 mm / 157 mm
4-jaw professional chuck set M33 x 3.5
External (closed):
50 mm
Internal (closed):
38 mm
Art. no.
5931101
5931102
Art. no.
5931054
External (closed):
90 mm
Internal (closed):
75 mm
22 mm / 59 mm
XX M33 thread mount
XX Chuck clamps up to 157 mm
XX Individually clamping jaws
XX M33 thread mount
XX Chuck clamps up to 100 mm
XX With screw insert
XX With replaceable jaws
XXCentric clamping
External (closed):
21 mm
Internal (closed):
9 mm
External (closed):
38 mm
Internal (closed):
18 mm
Art. no.
5931056
Tang set 3-part.
Tangs for use on lathes. The mount on the shaft
is MK2; it can be used on all suitable lathes.
Face plate for professional 4-jaw chuck set
Art. no.
5931055
8-part turning tool set
Extraction
Time-saving manufacturing of dimensionally identical workpieces with identical
profiles, comprising a stable, torsionresistant aluminium profile carrier and a
grey cast carriage with steel guide rails.
Set of 3 tangs
Wooden box included in scope of supply
Cone mount MK2
Art. no.
5931011
73 mm / 140 mm
53 mm / 96 mm
Scope of supply:
·· 3 x gouges
·· 1 x mortise chisel
·· 1 x roughing tool
·· 1 x round chisel
·· 2 x straight
turning chisels
33
Workshop equipment
Scope of supply:
·· Add-on parts for longitudinal
and cross-grain turning
·· Fastening bracket for
templates
·· One diamond point
·· Probe
·· Chip guard
Planing
Sawing
Art. no.
5931021
Turning
Sanding/grinding
HOLZSTAR lathe accessories
Extraction units
HOLZSTAR chip extraction units SAA series
Boosts the performance of your woodworking machines and offers user health benefits
XXFor milling, planing and saw chips
(not suitable for dust)
XXPlastic fan and housing; impeller design
boosts extraction performance
XXStable design·made of solid sheet steel,
no fragile plastics
XXLess static charge compared with plastic
designs
XXHigh extraction performance and
extremely quiet
XXEasily movable thanks to steering rollers
XXExcellent value for money
SAA 2003
SAA 3003
SAA 901
Scope of supply SAA:
·· One hose
·· Two clamps (SAA 901,
SAA 2001, SAA 2003)
Model
Art. no.
Technical data
Air flow rate
Duct input
Duct output
Motor output
Weight
34
SAA 901
5923901
SAA 2001
5922201
SAA 2003
5922203
SAA 3001
5922301
SAA 3003
5922303
1150 m³/h
Ø 100 mm
1 x Ø 100 mm
550 W
230 V / 50 Hz
25 kg
870 x 500 x 1495 mm
2,553 m³/h
Ø 125 mm
2 x Ø 100 mm
1.5 kW
230 V/50 Hz
47 kg
1000 x 750 x 2000 mm
2,553 m³/h
Ø 125 mm
2 x Ø 100 mm
1.5 kW
400 V / 50 Hz
47 kg
1000 x 750 x 2000 mm
3,910 m³/h
Ø 150 mm
3 x Ø 100 mm
2.2 kW
230 V/50 Hz
59 kg
1450 x 800 x 2000 mm
3,910 m³/h
Ø 150 mm
3 x Ø 100 mm
2.2 kW
400 V / 50 Hz
59 kg
1450 x 800 x 2000 mm
Extraction units/measuring tools/workpiece stops
PU extraction hose
XX2.5 m, transparent, spiral
Sanding/grinding
Dimensions
Ø 100 mm/2.5 m
Floor cleaning set 1
Suitable for all extraction units
XXIncludes premium
2.5 m spiral hose, extraction pipe,
floor nozzle with rollers, handle and
2 pipe clamps
Article no.
5142510
Reducing socket
Machine connecting pieces,
XXstraight, non-crimped, interior Ø
Planing
Article no.
5142427
Polyurethane flexible hose
XXtransparent with spiral, flame resistant,
available in 2.5 / 5.0 / 7.5 or 10.0 m lengths
Modell
Art. no.
Dimensions
Ø 40 mm
Ø 60 mm
Ø 80 mm
Ø 100 mm
Ø 120 mm
Accessories
Filter bag SAA 901
Filter bag SAA 2003
Filter bag SAA 3003
Chip sack for SAA 901 (PU 10)
Chip sack for SAA 2003 + 3003 (PU 10)
Article no.
5142500
5142501
5142502
5142503
5142504
Dimensions
Ø 100- 60 mm
BRS 1
5148100
Article no.
5930901
5932203
5932303
5930902
5123055
Protractor
XXFor precise angle adjustment of saw blades,
e.g., for sliding table, or mitre saws, magnet
integrated in housing
XXVersatile in use due to battery operation
(battery included)
XXResolution: 0.1°
XXPrecision: 0.1°
XXMeasuring range: 0° to 180°
XXDimensions (LxWxH): 50 x 50 x 33 mm
XXIncluding leather pouch with belt clip
Workpiece stop
XXAs a practical anti-slip aid for workpieces
during milling, planing, polishing, painting
work and much more
XXScope of supply: Set of 4 workpiece stops
Type
Measuring tape TBM 5 x 19
Type
Protractor WM 180
Type
Workpiece stop (4 pcs.)
Art. no.
5910519
Art. no.
5910180
Art. no.
5100004
35
Workshop equipment
Extraction
Turning
Measuring tape
XXMeasuring tape length: 5 m
XXMeasuring tape width: 19 mm
XXMeasuring tape thickness: 0.135 mm
XXAutomatic tape recoil
XXHousing made of impact-proof plastic
material and stainless steel housing
XXRugged loop and metal belt clip
Sawing
HOLZKRAFT measuring tools and workpiece stops – Useful helpers for your daily work
Material stands/telescoping trestle/sawbuck/folding trestle
HOLZSTAR material stands – Stable helpers in the workshop – space-saving, folding
XXMaterial stands universally deployable on
band saws, table saws and other woodworking
machines
XXPerfect for supporting long, bulky, or heavy
workpieces on the feed or discharge side
XXFolding design, thus particularly space-saving and
easy to transport
XXInfinite height adjustment
XXWith stable galvanized steel rollers
1
Model
Art. no.
Technical data
Load bearing capacity in kg
Min./max. support height
Max. support width
Weight
Dimensions (L x W x H) in mm
MS 1 K
5900004
MS 1 R
5900003
2
MS 3 R
5900005
3
1 MS 1 K
With ball top for, e.g., boards, lateral
movements are also possible.
2 MS 1 R
With roller top. Universally deployable.
70
70
700 / 1150 mm
700 / 1150 mm
450 mm
400 mm
10 kg
10 kg
460 x 470 x 1150 460 x 470 x 1150
45 / 60 / 90
670 / 1080 mm
285 mm
4 kg
430 x 500 x 1150
3
MS 3 R
With roller top and handle for fast adjustment.
Load-bearing capacities:
> Lowest position
- 90 kg
> Middle position
- 60 kg
> Highest position:
45 kg
HOLZSTAR sawbuck SB 1 – Extremely robust
XXStable and steady steel angle sections
XXExcellent corrosion protection thanks
to galvanised zinc surface
XXAnti-slip, toothed support surface
Model
Art. no.
Technical data
Load-bearing capacity
Weight
Dimensions (L x W x H) max.
XXFolds to a compact size
XXEasy to transport
XXFoldable
SB 1
5900008
180 kg
7.2 kg
800 x 850 x 780 mm
HOLZSTAR folding trestle FAB 1
Model
Art. no.
Technical data
Weight
FAB 1
5900006
XXHeight-adjustable without tools
XXAnti-slip coated surface
XXIdeally transportable: folds together with
carrying handle
200 kg
640 / 1030 mm
8.3 kg
970 x 620 x 1030 mm
HOLZSTAR Telescopic trestle TAB 1300
Height-adjustable, space-saving, foldable
Model
Art. no.
Technical data
Weight
36
TAB 1300
5900007
150 kg
805 / 1300 mm
6.6 kg
580 x 580 x 1300 mm
XXLatch folds out to prevent lateral slipping
of the worktop (max. width 640 mm)
XXEasy installation
800 - 1300 mm
XXStable and steady square steel tube
XXImpact- and scratch-proof plastic coating
XXSpace saving - foldable
XXHeight-adjustable thanks to easy-to-use latching
safety bolts
Universal material stand/Machining and work table/cantilever roller conveyor
HOLZSTAR universal material stand UMS 1
Roller stand, v-roller stand and trestle combined
Use as V roller conveyor:
Load bearing capacity
45 kg
Use as roller conveyor:
100 kg
75 cm
45/200 kg
820 / 1270 mm
10.4 kg
750 x 680 x 1270 mm
Planing
Use as workbench
200 kg
HOLZSTAR Clamping table/workbench SWT 100
Height-adjustable, pivoting, foldable, space-saving
XXEasy worktop height-adjustment in 7 stages
with foot pedal
XXHeight- and angle adjustment possible ergonomic work posture whether standing or
seated, independently of body height
XXRobust work table made of aluminium and
steel
XXStable and steady chassis made of powdercoated square steel tube
XXWork table folds for space-saving storage or
ease of transport
SWT 100
5900010
Sawing
Technical data
Max. load-bearing capacity
100 kg
Min./Max. table height
770 - 1070 mm
Max. clamping width with work table
201 mm
Max. clamping width with clamping jaws
410 mm
Table area - width
600 mm
Table area - depth closed
284 mm
Table area - depth open
485 mm
Angle of inclination - worktop
0°/25°/45°/80°
Weight
12.5 kg
Dimensions assembled (LxWxH)
600 x 580 x (770 - 1070) mm
Dimensions folded
950 x 570 x 250 mm
770 – 1070 mm
Model
Art. no.
XX8 continuously variable plastic clamping jaws
provide versatile clamping options, including
flat clamping or clamping of round workpieces
in horizontal and vertical positions
XXRotating clamping jaws with various profiles
for versatile workpiece clamping options
Height-adjustable
Pivoting
Technical data
Max. load-bearing capacity
Wheel diameter
Min./max. length
Min./max. height
Weight
Dimensions (LxWxH) min.
XXAll steering rollers made of plastic and fitted
with parking brakes
XXMultiple conveyors can be easily connected
using two hooks
130 kg
50 mm
450 - 1300 mm
670 - 920 mm
36 kg
450 x 480 x 670 mm
- 130
0 mm
Extraction
SRB 130
5900012
450
670 - 920 mm
XXExtremely robust made of square steel tube
XXNine galvanized steel rollers
XXDurable cantilever frame, fully galvanised
design
XXExcellent manoeuvring capability thanks to
four steering rollers
XXSteering rollers rotate through 360°
Turning
HOLZSTAR Scissor roller conveyor SRB 130
Height and length-adjustable
Model
Art. no.
UMS 1
5900009
35 cm
·· With folding hook for
connecting in series
37
Workshop equipment
Technical data
Weight
820 - 1270 mm
XXConvertible without tools
XXExtremely robust workmanship
XXWith non-slip rubber covering
Model
Art. no.
Sanding/grinding
15 cm
Universal workbench
HOLZKRAFT UWT 3200 universal workbench and roller conveyor with fast
clamping system. Can be used as a material stand or holding frame.
XXUniversally deployable for mitre saws, belt
sanders, re-saws, etc.
XXDesigned for guiding long workpieces
XXMinimal setup time
XXSpace-saving thanks to folding feet
XXGripping jaws with quick clamping
mechanism
XXHeight-adjustable roller supports
XXContinuously extendable support arms on
both sides to max. 2400 mm
XXAssembles and adjusts without tools
XXStable aluminium/steel design
XXExcellent load-bearing capacity up to 225 kg
Three integrated 230 V sockets on the
operator side.
Max. 2400 mm
Fig. shows standard
scope of supply
One integrated storage compartment for
spanners, screws, etc.
Optional accessories
Additional roller jig set (2 pcs.)
Art. no. 5900025
Ideal for cutting
long workpieces.
Retooling is fast and
easy thanks to fast
clamping system.
Work lamp on clamping rail
Art. no. 5900023
Vice with quick release
Art. no. 5900024
Model
Art. no.
UWT 3200
5900020
Technical data
850 / 1000 mm
Max. width
2400 mm
Weight
30 kg
1600 x 600 x 850 mm
38
Space-saving
folds for transport or storage.
Additional clamping rail set (2 pcs.)
Art. no. 5900022,
Universal workbench/carpenter's workbenches
Sanding/grinding
Quick clamping
The holding rails can be easily and conveniently positioned, moved or removed thanks to a quick release system.
The roller conveyors and height and
laterally adjustable. Extendable to
500 mm.
The roller conveyors are each equipped with a folding end
stop as a factory standard. Ideal for convenient cross cutting.
The roller conveyor mounting
bracket can also be rotated.
Planing
Ideal as a support when cross cutting longer workpieces (fig. shows a metal hacksaw).
Typical application - as a feed aid in thickness planing.
HOLZKRAFT carpenter's workbenches – for DIY fans through to joiners
HOLZKRAFT HB 1701 New
XXCompact carpenter's bench for craftsmen
and training
XXUpper part made of solid beech glued
laminated timber
XXChassis made of finger jointed beech glued
laminated timber
XXCarefully machined tool drawer
XXWith French front and rear jaws
XXWith two rows of bench dog holes
XXEnvironmentally-friendly oiled surfaces
XXSuitable for left- and right-handers thanks
to pre-drilled holes for vice
XXDelivery broken down for self-assembly
Sawing
HOLZKRAFT HB 1401 and 1901
XXCompact carpenter's bench for craftsmen and
training
XXFinger jointed, glued beech laminate
XXPrecision made and finished with care
XXMade of solid, steamed copper beech
XXDelivery broken down for self-assembly
XXWith tray and four round bench dogs as
factory standard
XXWith two rows of bench dog holes
XXSurface untreated
XXHB 1401 and
HB 1901 with two
rows of bench dog
holes
Turning
2 rows of bench
dog holes
HB 1701
New
New
Scope of supply HB 1401
4 round bench dogs
4 round bench dogs
4 round bench dogs
Technical Data
Overall dimensions
Dimensions without claws
Long front/rear jaw
Wide front/rear jaw
Clamping width front/rear jaw
Board width/bench dog rail
Weight
HB 1401
5101411
HB 1901
5101911
HB 1701
5101711
Fitted cupboard H1
Fitted cupboard H2
Scope of supply H1*
Scope of supply H2*
2 storage compartments
2 storage compartments
1 door
2 doors
*Delivered completely installed
1500 x 650
2000 x 650
1800 x 760 mm
1340 x 500 mm
1840 x 500 mm
1650 x 610 mm
360 mm/360 mm 360 mm/360 mm 360 mm/360 mm
55 mm/55 mm
55 mm/55 mm
55 mm/55 mm
160 mm/160 mm 160 mm/160 mm 130 mm/130 mm
30 mm / 30 mm / 30 mm
47 kg
57 kg
62 kg
Model
Art. no.
Technical Data
Dimensions in mm
Weight
Fitted cupboard H1 Fitted cupboard H2
5102155
5102156
1000 x 430 x 500
25 kg
1000 x 410 x 460
30 kg
39
Workshop equipment
Model
Art. no.
New
Extraction
HB 1901
Sales Germany:
HOLZSTAR - Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
96103 Hallstadt/Germany
Phone: +49 (0) 9 51 - 96 555 - 0
Fax
+49 (0) 9 51 - 96 555-55
email:info@holzkraft-maschinen.de
Web:www.holzstar.de
holzkraft.de
metallkraft.de
cleancraft.de
schweisskraft.de
unicraft.de
aircraft-kompressoren.de
finikompressoren.de
Your specialist retailer:
·· The publication of this catalogue renders all
previous price lists invalid.
·· Prices are recommended retail prices,
subject to change, in €, plus statutory VAT, plus
packaging, shipping, transportation, unloading,
installation and training costs as applicable.
·· We accept no liability for printing errors, mistakes
or incorrect representation.
·· Technical and visual changes reserved.
·· Some illustrations show optional accessories.
·· Delivery is effected solely on the basis of our
terms of delivery and payment.
·· All items are sold through specialist retailers.
·· The goods shall remain our property until
payment has been received in full.
·· Our retention of title shall remain valid in case of
sale to a third-party.
·· Legal warranty conditions apply for businesses.
·· Copying and reproduction in full or in part is
subject to written approval by us.
8005509-16
optimum-maschinen.de
Sales Austria:
AIRCRAFT Kompressorenbau und
Maschinengroßhandel GmbH
Gewerbestraße Ost 6
4921 Hohenzell / Austria
Phone: +43 (0) 77 52 - 70 929 - 0
Fax:
+43 (0) 77 52 / 70 929 - 99
email: info@aircraft.at
Web:www.aircraft.at
© Stürmer Maschinen GmbH / Art. no. 8005509-16
2016-05 / PT5.5K

Main catalogue 2016 Woodworking machines for DIY

Transcription

Similar documents

Woodworking machines

SPURBILDUNGSTESTGERÄT HAMBURG WHEEL TRACKER

iPHONE4/4S