The all new volvo FMX 520 26.1 cu. M DuMP Truck

Transcription

The all new volvo FMX 520 26.1 cu. M DuMP Truck
Volvo Trucks. Driving Progress
The all new volvo FMX 520
26.1cu.m DUMP Truck
Innovative. Productive. Efficient.
Volvo FMX 520
26.1 Cu.m Dump Truck
With the rapid growth in the mining industry, the market is constantly striving to meet the rising demand of mineral
output. ‘Being More Productive’ has therefore become the essence of every customer’s requirement. However,
shifting to a higher tonnage class of machine has traditionally been a challenge for customers, given the high
acquisition and operating costs.
The all new Volvo FMX 520 26.1 Cu.m Dump Truck is a groundbreaking innovation for mining
applications, providing customers an opportunity to work with a highly productive solution at a more affordable
cost and better operational efficiency. Built on a robust new FMX platform with a mighty driveline, sturdy
chassis and large capacity dump body, this dump truck ensures that you achieve high productivity combined with
an improved bottom-line.
With a smart technology in place, you can also have control on your dump truck’s performance and take
desired actions to improve its efficiency.
2
3
Built for high productivity
Low Fuel consumption.
– Fuel efficient engine
– Close, well balanced
transmission ratio
– Optimum drive axle ratio
– Low vehicle unladen weight
4
Good drive comfort.
– Comfortable driver seat
– Ergonomically designed
dashboard and instrument
panel
– Sleek steering column for
better leg space
– 4-point cab mounting with
coil suspension and shock
absorbers
Safe operation.
– Cab tested for world’s most
stringent safety norms
– Large windscreen giving good all
round visibility
– Strong headlamp illumination
– DGMS features
Low Maintenance cost.
– Rugged driveline
– Robust chassis and
components
– Easy serviceability
– Cab front specifically designed
for mining operation
High Productivity.
– 26.1 Cu.m (Struck volume) Rock Body
– 67 tonne Gross Vehicle Weight
– High power-to-weight ratio
– High torque-to-weight ratio
5
Power for performance
Heavy power for mighty
performance
The Volvo D13A520 is a 520 hp, 12.8 litre in-line 6-cylinder engine with an overhead camshaft, 4 valves per
cylinder and unit injectors. The engine meets Euro 3 exhaust emission regulations. It is designed to ensure
excellent driving characteristics, high reliability and excellent fuel efficiency. The timing gear is located at the rear
of the engine, which reduces vibration. With a cylinder block and cylinder head made of cast iron, a strong base is
created for a dependable engine.
The Volvo D13A520 engine offers a steady flow of power uphill and massive braking power downhill and evens
out the gradients. The engine’s power is available virtually from idling speed, which ensures excellent starting
traction. This power stays with you throughout and maximum torque is available high upto the rev range (2500 Nm
at 1050-1450 rpm). A wide economic speed range of 1050-1600 rpm helps to get the maximum fuel efficiency.
The Volvo torque curve.
You’ll feel it in the pedal.
Excellent torque at low revs. An extremely
wide max torque range. Peak torque meets
peak power. Volvo’s leadership in diesel
engine technology is clearly visible once
you start comparing engine curves. You’ll
experience fast acceleration, excellent
pulling power, comfortable low-speed
handling and not least, a fuel efficient
and pleasurable ride at cruising speed.
6
Fuel efficiency built-in.
The optimised combustion chamber
geometry. The fast and precise EMS
controlled injection. The high gas-fill ratio.
We could go on listing what makes Volvo
engines hard to beat when it comes to fuel
economy. Your bottom-line will reap the
benefits. So will the environment.
VEB+
Volvo’s famous engine brakes.
Minimise wear on the brake pedal.
Volvo’s patented engine brakes produces
impressive braking forces. Integrated with
the cruise control, it makes a descent into
the gravel pit or mine comfortable without
compromising on safety or fuel economy.
Accurate engine
management through
Volvo EMS.
Volvo EMS provides precise and
efficient engine control. The
engine control module takes
in data from several sensors,
compares current readings with
stored parameters and adjusts
fuel quantity and injection timing
accordingly.
Gear driven camshaft.
Gear driven camshaft ensures
precise control over the unit
injectors and valve timing. The
unit injectors are positioned
vertically and centrally which
provides extremely fast,
well controlled injection and
symmetrical distribution of the
fuel in the combustion chamber.
Low exhaust and noise
emission.
The D13A520 more than meets
the demand for high performance
in conjunction with low exhaust
(Euro 3) and noise emissions. The
crankshaft and camshaft have
hydraulic vibration dampers which
minimise noise and vibration – a
particularly low noise is evident at
idling speed.
Dependable construction
and design.
A strong engine foundation is formed
by a cylinder block and a cylinder
head made of cast iron. The lower
part of the cylinder block has a
steel reinforced ladder frame – this
minimises vibration and increases
rigidity. The timing gear is located at
the rear of the engine which reduces
the number of components.
3
7
matched gearbox
Transmission for efficiency
Fully synchronised manual gearbox
You’ll have to look hard for a gearbox that is faster and easier to use. Servo synchromesh and cable linkage
mean a vibration-free gear lever and slick gear changes. The wide ratio span gives high starting traction while
simultaneously ensuring that there are ample resources for high average speeds.
The new Volvo FMX 26.1 Cu.m Dump Truck is fitted with fully synchronised 14-speed splitter-range gearbox
VT2514B, matched perfectly to the fitted D13A520 engine’s characteristics. Close and well balanced ratios make
it easy for the truck to climb steep gradients and facilitate smooth acceleration. Extreme low crawler ratio 16.41:1
ensures good startability when hauling heavy loads in difficult driving conditions.
8
Cable link gear-changing.
The VT2514B is equipped with a newly
developed shift by cable which results in
short, distinct gear lever movements. The
gear lever is completely free of vibration,
which contributes to comfortable operation
and a lower noise level in the cab. The
gearbox also has patented synchronisation
which, with the assistance of a mechanical
servo function, provides extra power at the
moment of synchronisation. The torque
that arises when the synchronisation starts
to slow down the rotation is converted to
an axial force which gives the driver servo
assistance. This design solution contributes
to low gear-shifting forces and increased
driver productivity.
Robustly dimensioned
components.
New high performance
transmission oil cooler.
All shafts, bearings and gears are robustly
dimensioned for high reliability and long
service life. All the gears are made of
special steel that has been case-hardened
to give high strength. The gears in the
basic unit are bevel gears, which mean that
several gears can be in mesh with each
other at the same time. This results in quiet
operation and high reliability.
The gears on the input, main and
reversing shafts are journalled with double
needle bearings, with bearing holders in
steel, which give low friction. All the shafts
and planetary gears in the range-change
gearbox are journalled in roller bearings,
with the exception of the low-loaded output
shaft which is journalled in a ball bearing.
New oil cooler is based on air cooling of
the agent that cools the transmission fluid.
The system consists of a separate radiator
at the front of the vehicle that is
series-connected to the engine’s cooling
system, and a heat exchanger attached to
the gearbox. The coolant is cooled in the
front-mounted radiator before it reaches
the heat exchanger where the transmission
oil is circulating. In this way, oil temperature
is lowered very effectively, giving the
gearbox considerable operating reliability.
9
more load carrying capacity
Sturdy axles and chassis
for heavy load
Volvo FMX 26.1 Cu.m Dump Truck can carry heavy loads, thanks to its high tonnage front twin axles, rear
tandem drive axle and a tag non-driven axle. Rear bogie and front suspension is reinforced to withstand
high loads under tough conditions. Tag axle is equipped with hydraulic suspension for efficient load
distribution over three rear axles, ensuring high stability and optimised traction.
10
Steerable front axles.
Rear tandem drive axle.
Non-driven steerable tag axle.
Twin front axles’ heavy duty I-beam design
provides both high load carrying capacity
and good approach angle, important for
mining application.
Tandem drive offers excellent traction
and superb pulling power. The result is
excellent get-you-there ability and low tyre
wear. The reduction at hubs takes places
at 4 planetary gears, giving more uniform
and steady load distribution, resulting in
higher truck vehicle availability.
Electronic-hydraulic steering mechanism
improves drivability with increased
manoeuvrability and reduces tyre wear.
The steering angle is based on wheelbase
and vehicle speed, while a potentiometer
reads the position of the front axle;
the ECU calculates the corresponding
theoretical steering angle of the tag axle.
Solenoid activated hydraulic valves steer
the tag axle to its calculated position.
Strong chassis.
Cross members.
Mining tyres.
The chassis frame is made from highstrength steel. Its front section is bent
outwards to accommodate the cab
and engine, and has the same material
thickness (8 mm) in the web and the
flanges. Frame is reinforced with 5 mm
thick inner liner, made from high strength
steel, which runs from the front of frame
to end of frame.
Front closing member with central heavy
duty towing device, certified for 25 tonnes
and passed internal Volvo tests with
forces upto 32 tonnes (lateral pull / push).
Reinforced cab, engine, transmission
and chassis cross member provide extra
ruggedness to the chassis suitable for
tough off-road applications.
12-24 cross-ply (20 ply rating) mining
tyres ensure better footprint of the vehicle
in rough mining roads, while carrying
heavy loads. It also helps in improving
the ground clearance of the vehicle, to
ensure unhindered operation in off-road
applications.
11
Large capacity dump body
Delivering high productivity
The new Volvo FMX 520 26.1 Cu.m Dump Truck offers a large dump body of 26.1 Cu.m struck volume
capacity. The body is made of thick wear resistant steel on floor, sides and head board, suitable for mineral
overburden application. 10 degree scow is provided at the end for better material flowability during
tipping. The high capacity body enables the customer to get higher productivity without compromising on
operational efficiency.
Rigid canopy with truss beam
structure allowing the cab to
tilt even without tipping – very
handy during maintenance
works under the cab.
12
Heavy duty 192 mm dia
Nitrided telescopic front
end tipping cylinder.
Flexible and strong sub-frame
to arrest torsional loads
compatible with chassis frame.
Double hyfix clamps to arrest
vibrations.
Heavy duty stabiliser bar and
rear hinge making the body
robust.
7 nos. solid rock breakers, which
run across the floor and halfway
through the headboard.
13
built-in robustness
Rugged design for high
durability
The Volvo FMX has been designed as a highly robust and durable piece of equipment. The front towing member, is one
piece of cast iron and is strong enough to hold up to 32 tonnes with its tow hook. The corner bumpers are made out
of three-millimetre thick high grade steel. With its new box-like construction, the front becomes incredibly sturdy. So it
absorbs the energy of a low speed impact like a giant spring.
There is nothing hanging down underneath the truck except wheels. The new headlights are positioned higher
up where they are less likely to get damaged and best kept. Body panels are split rather than overlapping so that
any cosmetic damage is isolated.
And if you do manage to do any serious damage to the front, you’ll probably be able to replace the part yourself as
the screws are all visible and easily accessible. We’re pretty sure this is going to be popular with customers as it
offers savings and increases uptime.
14
The sturdy bumper.
Push and pull 32 tonnes.
It’s made of 3 mm thick high grade steel, it’s
in three parts and the attachments are visible
and easy to undo. The corner bumpers
now have the same exposed fasteners for
easier replacement. The steel bumper is also
covered by a thick polypropylene coat that
largely regains its form if damaged.
The towing member is one piece of cast iron.
It’s strong enough to hold upto
32 tonnes with its tow hook. And the fact
that the towing member is exposed means,
you can use it like a ladder to climb up
the front. Wherever you step you’ll find it’s
solid, nothing is going to break or crack. A
handle opens so that the towing pin can be
accessed when needed.
Strong headlamp with
protective mesh.
Sturdy mirror and brackets.
Improved engine mounting.
Cab mounting.
Robust rear-view mirrors with sturdy
mountings withstand rough treatment, thus
also giving a steady image in the mirror.
Four point engine mounting optimised to
reduce road induced vibrations and improve
road handling. Rear engine mounting with
more rubber increases insulation, improves
ride comfort and durability. Front engine
anchorages made of aluminium instead of
cast iron in order to save weight.
Four point coil suspension with shock
absorbers with vertical stroke of + / - 50 mm
to reduce the risk of bottoming out even in
the worst road conditions.
The attachments of the lights are sturdy
enough to safeguard the lamp bulbs from
vibrations and keep the lamp bodies in
place, even if you happen to bump into
something. A new headlight protection mesh
protects the headlight from stone chipping,
while keeping the illumination unaffected.
Unique front suspension
geometry.
New front parabolic leaf suspension’s
unique design ensures that the leaves lie
flush with each other only in the middle
and at the ends. This ensures that friction
between leaves is very low, thus giving a
smooth and comfortable ride without any
bumps.
The spring leaves are made from special
steel and are dimensioned so that the
load is evenly distributed over each crosssection of the leaf. Front shock absorbers
contribute to the less vibration of chassis.
Front stabiliser ensures better torsional
rigidity during turning of the vehicle at
speed.
Reinforced bogie structure.
Inverted bogie suspension design provides
equal load distribution between both rearforward and rear-rearward axles. Rubberjournalled V-stays and reaction rods provide
better distribution of torsional load to the
chassis.
Rubber springs between the spring leaves
and axle, and two shock absorbers for the
front driven axle contribute to less vibration
of chassis and good comfort under all axle
loads. Rear stabiliser provides torsional
rigidity to the chassis under rough terrain.
Rear bogie suspension is reinforced to
better withstand high loads under tough
conditions.
Electronically controlled
hydraulic-pneumatic suspension.
The system is designed for mining
operation and combines efficient load
distribution over three rear axles, high
stability and optimised traction. Hydraulicpneumatic suspension optimises
compensation between the left hand and
the right hand side of the chassis. The
suspension cylinders can be locked by
means of a switch controlled by the driver,
to achieve maximum tipping-stability. To
improve traction on slippery soil, a traction
improvement function is available to
transfer load from the tag axle to the leafsuspended driven rear axles, for a limited
time.
15
driver comfort
Spacious room for
stress free work
Despite being a tough truck, everything inside the cab feels inviting. Sitting in the comfortable driver seat, the
first thing that strikes you is the clean design – the dash, steering wheel and instrument cluster. The gently
curved dash not only looks appealing; it’s also designed for an ergonomic and comfortable driving position with all
buttons, instruments and storage within easy reach.
The instrument cluster puts vital information where the driver can see it at a glance, while the less frequently
used controls are further away. The sleek steering column design allows comfortable leg space for the driver to
wriggle around.
Raven is the colour of the dashboard. It is especially developed for the mining and construction environment,
because this colour is less sensitive to dirt.
16
Modern and ergonomic
dashboard.
Easy glance instrument cluster.
All at your thumb tips.
The instrument cluster has a contemporary
design with easily read and understood
distinct graphics for a convenient overview.
Driver related information has a high and
central position in the driver’s view. All
warnings and vital information are shown
in the Driver Information Display (DID) at
the right of the instrument.
Keypads provided on steering for cruise
control and navigation on information
display, allows you to keep a tight grip
on the wheel - always. Stalk switches
are provided on steering for direction
indicators, main beam, windscreen wiping
& washing and exhaust brake operation.
More knee space.
A great position to be in.
Steering column has been made sleek in
design to provide more knee space for the
driver, bringing more comfort while driving.
The steering lock mechanism is combined
with vehicle ignition electrical switch on
the dashboard.
The driver seat has a well-shaped seat
cushion and backrest. Thanks to its
advanced ergonomic design, the driver gets
perfect support and seating comfort. Airsuspended seat variant provides even better
comfort by offering automatic adjustment to
the weight of the driver and wide variety of
fore-aft adjustments.
Electrical manually controlled
climate unit.
Plenty of room for storage.
Electric parking brake.
There are plenty of places in the interior
and exterior of the cab for keeping
personal belongings, like dash panel
center section storage, panel top tray etc.
Extra storage space is also provided on
the cab exterior on both the driver and
passenger side.
The parking brake activation is through
an easy access electrical switch on the
dashboard. Automatically engaged at
key-off, and automatically released when
taking off.
The gently curved dash not only looks
appealing. It’s also designed for an
ergonomic and comfortable driving
position, with all controls, instruments and
storage within easy reach.
Electrical switches for climate control allow
the system to remember the settings made
in the climate control system when the
truck is switched off. When the truck starts
the next time it will have the same settings.
17
Telematics solution
Dynafleet Online enabled
Dynafleet is Volvo Trucks Online Transport Information System for improved profitability. Customers can see in
real time their vehicles’ performance data that is critical, to have control on their fleet. In addition, Dynafleet shows
the areas of improvement to support profitability in the long run. By providing clear and accurate information, the
system makes it easier to take the right decisions. And customers can access this information anywhere, also
outside the office, from any standard PC and device with an internet connection.
The Volvo FMX 26.1 Cu.m Dump Truck comes enabled for Dynafleet Online service of ‘Fuel & Environment’.
The Fuel & Environment service saves customers time and effort in analysing vehicle data and helps find ways to
cut fuel cost. Customer simply has to sign-up for the service and stay connected by paying the monthly / annual
subscription fee.
Fuel & Environment
The Fuel & Environment service provides you all the critical information related to
the vehicles’ performance. It also saves you time and effort analysing vehicle data
and helps you find ways to cut fuel costs. Through the various reports, both potential
savings and progress over time can be made visible in just seconds.
18
Safety
Safe as Volvo
Safety in trucks means prevention of hazardous
incidents and reduction of any damage and trauma
that may occur. This means taking into account
the protection of the driver, passenger, cargo and
all road users in traffic. Safety is as always a Volvo
hallmark, Volvo is safer than other trucks. Yet, more
safety features have been added.
Toughest tests in the world.
Volvo is the only truck manufacturer in the world to
conduct the extremely tough cab tests that we do
at our collision centre. All cabs meet the Swedish
cab strength standards – the toughest in the world.
In real life, the test is comparable to a crash at
80 km/h with a stationary truck, and suggests that
the driver too would survive the crash.
PSS-DUAL system.
Anti-slip front footsteps.
Electric parking brake.
PSS-DUAL system is an emergency
steering system, wherein, in addition
to the engine driven pump, there is a
transmission mounted pump to power
assist steering in case of engine failure.
This pump will be operational only when
there is a cut off in the engine pump line. It
is an additional stand-by system offered as
a safety feature to avoid accidents.
Fixed footstep with anti-slip function
secures the best possible grip in all
weather conditions, for cleaning the
windshield. An extra foldable footstep
further improves the climbing access on
trucks.
The parking brake activation is through
an easy access switch on the dash. Also
the parking brake activates automatically
when the engine is turned off to ensure
a high degree of safety even if the driver
misses it.
19
DGMS Compliant
Features & accessories to
meet DGMS requirements
Directorate General of Mines Safety (DGMS) is the Regulatory Agency under the Ministry of Labour and
Employment, Government of India, in matters pertaining to the occupational safety, health and welfare of persons
employed in mines. Volvo in India is committed to meet safety requirements laid down by DGMS and offer a
complete range of features and accessories to meet DGMS standards.
Volvo offers the following features and accessories on Volvo FMX 520 26.1 Cu.m Dump Truck, which make it
compliant with the safety norms specified by DGMS.
Cabin guard extension.
An extended canopy provided on the dump
body covers the cabin fully, in order to
prevent any damage to the cabin during
loading.
Fire resistance hoses at the hot
zone & fire resistance quality
electric wires and sleeves.
The pneumatic hoses and electric wire
sleeves are made of Polyamide (PA), which
is thermoplastic. It is not inflammable and
can withstand heat up to 100O C.
20
Body lifting position locking
arrangement (Body Tipping
Position Sensor).
A body tipping position sensor is mounted
on the sub-frame. A visual warning is
displayed on the dashboard when the dump
body is not fully seated on the sub-frame.
Tail-gate protection.
In the event of head to tail collision, the
tail-gate protection system reduces
penetration of scow end into cab and
retains survival space for the occupants.
Blind spot mirror
(in front of cabin).
A blind spot mirror is mounted in front of
the cabin on the co-driver side to help
driver get a view of any blind spot area in
the front.
Audio-visual alarm while
reversing.
A DGMS approved audio-visual alarm is
mounted at the end of chassis frame, in
order to alert while reversing the vehicle.
Exhaust / Retard brake.
Propeller shaft guard.
Limiting speed device.
The Volvo engine is designed with an in-built
auxiliary brake with braking effect of 536 hp
at 2300 rpm. When the trucks is negotiating
downhill gradients, the auxiliary brake coupled
with the driveline characteristics ensures a
very high level of retardation.
The propeller shaft guard prevents fall out
of propeller shaft in the rare case of any
breakage.
An electronically controlled governor
enables locking of the speed of the vehicle
at the desired speed limit. Currently, for
Volvo dump truck, the speed is restricted to
not more than 45 km/h.
Fire suppression system.
Rear vision system.
Load indicator & recorder.
Fire suppression system is offered as an
optional fitment. For vehicles with semiautomatic fire suppression system – in
case of fire, the operator has to remove knob
pin & press the knob provided in the cabin.
Consequently, powder spray starts in the
hot zone area from the main cylinder which
suppresses the fire. For vehicles with
fully-automatic fire suppression system – there
is a separate sensor for sensing any fire in the
vehicle.
The rear vision system is offered as an
optional fitment. It consists of a 7” digital
display monitor fitted on the dashboard and
an Infra LED night vision camera mounted
at the rear of chassis. It displays 180
degree vision of the rear area of vehicle
and also operates in no-light conditions
with infrared image sensing. The system
automatically gets activated when reverse
gear is engaged.
Load indicator & recorder measures and
records the payload being carried by the
truck. Load cells are installed on the lifting
arms. As the load is lifted, the trigger and
load cell output is processed by the main
control unit and information of weight is
displayed in the local display unit installed
in the cab.
Seat-belt reminder.
Retro reflective reflectors on
all sides.
Proximity warning device.
The seat-belt reminder is an audio visual
warning displayed on the dashboard if the
driver moves the vehicle without fastening
the seat-belt.
Turbocharge guard & exhaust
tube coated with heat insulated
paint.
A heat shield of aluminised coated steel is
provided over the vertical muffler till the top
of the cabin and over the turbocharger. The
coating quickens heat loss and eliminates
any chances of injury upon contact.
Reflective tapes on sides, front and rear of
the vehicle improves visibility.
The proximity warning device is an optional
fitment on the truck, designed to warn the
driver if there is any obstacle in front of the
vehicle. The system consists of sensors
and a buzzer which provides a beep sound
based on proximity of the obstacle.
Provision of two brakes (Fail safe).
Fail safe brakes are provided in addition to
the dual line service brakes. The fail safe
brakes ensure that the mechanical spring
brakes are applied in the case of complete
failure of the service brakes.
Battery cut-off switch.
Auto dipping system.
A battery cut-off switch is provided in
order to decrease the chance of fire due to
overcharging.
The solution is under development and
testing.
21
truck Specification
10925
1956
3836
1221
6394 (PIVOT LENGTH)
1518
5585
ENGINE
REAR AXLES
Six-cylinder, in-line direct injection diesel engine
Drive tandem hub reduction axles with four planetary gears
Overhead camshaft with four valves per cylinder
Differential locks – inter-wheels and inter-axles
Electronically regulated fuel injection with unit injectors
Ratio
Heavy duty turbocharger and intercooler
Non-driven heavy duty tag axle
7.21:1
Engine management system with driving information and diagnosis
Displacement
12.8 litre
Bore x stroke
131 mm x 158 mm
Compression ratio
18.1:1
Max. power
520 hp @ 1500-1800 rpm
Max. torque
2500 Nm @ 1050-1450 rpm
Economy speed range
1050-1600 rpm
Emissions*
BS III / Euro 3
Max. engine brake power
536 hp (VEB+)
* Emission requirements conform to ECE / EEC regulations and MOST / CMVR / TAP 115 / 116
SUSPENSION
Front
Parabolic suspension with S-shaped leaf geometry
Double-action shock absorbers and stabilisers
No. of leaves
Tandem Axle
Heavy duty bogie suspension with conventional multi-leaf spring
Rubber-journalled V-stays, reaction rods, stabiliser and two shock
absorbers
CLUTCH
No. of leaves
Power assisted drag type dual friction discs
Tag Axle
Plate diameter
400 mm
11
Electronically controlled hydraulic-pneumatic suspension
GEARBOX
WHEELS AND TYRES
Manual synchronised range / splitter gearbox
Tyre size
Heavy duty transmission oil cooler with additional radiator
Wheel rim size
No. of gears Total no. of wheels fitted
12 forward + 2 crawler + 4 reverse
3
Rear
12” x 24” Cross Ply (20 Ply)
8.5” x 24”
16
1 no. spare wheel rim and tyre
POWER TAKE-OFF
Clutch dependent gearbox mounted power take-off
CHASSIS FRAME
‘C’ channel section side members made of high-strength steel
FRONT AXLES
Cross section
Twin heavy duty steerable front axles with high ground clearance
Full length inner reinforcement
Inner reinforcement thickness
22
300 mm x 90 mm x 8 mm
5 mm
STEERING
Exteriors
Hydraulic power steering with variable displacement pump for
front axle.
New heavy duty bumper with extremely robust design and high
approach angle
Electronically controlled hydraulic steering system for tag axle
Robust front towing device certified for 25 tonnes
Tilt and telescopic adjustable steering wheel
Distinct V-shape Daytime Running Light (DRL)
Steering wheel diameter
500 mm
Heavy duty headlamp unit with higher illumination main beam
Cab fully suspended by four coil springs and shock absorbers
Front Xenon spot lamps
EXHAUST SYSTEM
Vertical muffler, vertical exhaust outlet on right hand side
DUMP BODY & HYDRAULICS
BRAKES
All-steel welded construction Rock Body
Dual-line air brake system
Struck volume
Z-cam drum brakes with automatic adjustments
Floor, side board and head board made of high tensile wear resistant
steel
New electronic parking brake activation
Spring type parking brake chambers on 2nd front axle, 1st rear axle
and 2nd rear axle
7 nos. solid angular rock breakers on the floor
Full length canopy
Tipping angle with knock-off valve
PNEUMATICS
26.1 Cu.m
45 deg
Heavy duty front mounted telescopic cylinder
Gear driven, double cylinder reciprocating air compressor
Direct-mounted hydraulic pump on P.T.O.
Max. compressor capacity
Oil tank with breather filter, oil level indicator and return line filter
900 l /min
New electronically controlled air pressure modulator (APM)
Total air tank capacity
Oil tank capacity
178 litre
123 litre
VEHICLE DIMENSIONS, mm
ELECTRICALS
New improved truck electronic architecture
System voltage
24 V
Volvo maintenance-free batteries (2 nos.)
Battery voltage
Battery capacity
Alternator capacity
12 V
170 Ah
120 A
TELEMATICS
Volvo Dynafleet Online services
TOOLS AND ACCESSORIES
Standard tool kit, first-aid kit, two warning triangles, bulb and fuse kit
20 tonne hydraulic jack
CAB
Overall length
10925
Overall width
2800
Overall height
Turning circle diameter
Minimum ground clearance
3836
25500
390
VEHICLE WEIGHTS, kg
Unladen weight
23000
Max. gross vehicle weight
73000
Max. payload
50000
PERFORMANCE DATA
Economy speed range on top gear
32-50 kmph
Max. speed (Geared)
65 kmph
Max. speed (Limited)
40 kmph
FMX day cabin
Crash tested steel welded structure
Accommodation
Cabin tilt angle
1 driver + 1 co-driver
700
Interiors
Electrical manually controlled climate unit
New ergonomically designed dashboard with easy access stalks,
switches and controls
New instrument cluster with easy glance displays and on-board
diagnostics
Comfortable driver’s seat with adjustment of fore-aft, height,
backrest, lumber support and seat tilt
Cushioned foldable co-driver seat
Red safety belt
Caution: Do not drill or weld on the frame.
Note: Volvo has a policy of continual product improvement. The specifications / images
shown here are indicative and are subject to change without prior notice. Performance
parameters are subject to stability of the vehicle.
23
Speed
The following graph depicts the truck’s capability to maintain high average speeds even at the high grades of mining roads.
Even at a steep gradient of 1:16, enough power is available with the vehicle to propel it at a constant speed of 26 kmph.
Speed [km/h]
50
Grade: 0%



40
30
Grade: 6.25% (1:16)
20

Grade: 10% (1:10)



10











0


10
20
30

Time [s]

Gradeability

40

50

60









 effort pattern of the vehicle
The following
graph demonstrates the tractive
at various gears and vehicle speeds.
Each curve
represents the tractive force at the rear wheels. The right side data shows
the
inclination
(in
percent)
at
which
the

 truck can
climb in each gear. To determine the gear, plot the point which would denote the given speed against a given gradient. Gears
on the curves above the point would take up the given conditions. Any conditions outside the curve would be non-feasible.




























        

DISCLAIMER:
Results shown in this computer simulation are based upon ideal conditions. Factors including, but not limited to, environmental conditions,

driver behavior, vehicle maintenance, fuel quality and / or a change in the truck specifications or operating conditions may cause actual results to vary.

24
Competence development
Making good drivers
better
Driver Training & Competence Development
Providing state-of-the-art trucks is only a part of the transport solution. Customers must get the best output from
the vehicles and higher return on the investment. Volvo Driver Training Center offers various training programs
to help customer improve profitability. The center helps understand the importance of the link between high
performance trucks and the drivers, mechanics and fleet managers. It also helps better understanding of vehicles,
maintenance practices and efficient operation, which goes a long way in improving safety, uptime and higher
productivity throughout the life-cycle of the vehicle. Training helps in fuel saving, safety and higher profitability.
Volvo training programs give special importance to driving practices and routine maintenance that helps in
achieving higher fuel efficiency in the most demanding off-road applications. Our new Value Program on fuel
economy helps to create awareness among the drivers on the importance of saving fuel, features available in
the trucks to improve fuel efficiency and appropriate driving practices. It also offers operational consulting to
customers through regular feedback on site conditions and operating practices that influence fuel economy.
25
Volvo services
Support all the way
World class trucks require world class service to maximise its operational efficiency. At Volvo we focus on
ensuring that your Volvo trucks continue to perform, delivering the best-in-class vehicle uptime, fuel efficiency
and driver productivity. We not only believe in protecting your investment, but also enhancing your operational
profitability. Simply put, our aftermarket services complement our range of world class trucks.
Countrywide Service Network
Volvo Trucks has a comprehensive network of service
and parts centres in India. The network is divided
into 4 regions and each region has a Hub Dealer
fully equipped with infrastructure, tools, equipment
and manpower. Apart from the Hub Dealer there are
other dealerships who work in close proximity with the
customers. Site support is provided at the remotest
locations and is managed by site support dealerships.
There are also sub dealers who are an extension of the
private service dealers and they provide on-site support
to the remotest locations of mines across India.
Container workshops are deployed at select mining
sites to offer service at the customer’s doorstep.
–
–
–
–
–
–
Manali
Chandigarh
Delhi
North
Gurgaon
Jaipur
east
Singrauli
Ahmedabad
Surat
Mumbai
West
Dhanbad
Korba
Kolkata
Howrah
Nagpur
Chandrapur
Bhiwandi
Pune
Bhubaneswar
Ramagundam
Hyderabad
Goa
Hospet
Chennai
south
Kochi
26
Type
Vijayawada
Hoskote
Bengaluru
Genuine Volvo Parts
A Volvo truck is chosen because it comes with a
promise that encompasses productivity, uptime and
driver safety. The same is applied while choosing
Genuine Volvo Parts for service and repair. They are the
best choice; simply because they are made by Volvo
Trucks and offer a long service life, protecting your
investment hence giving the best returns. You trust
Volvo to build the best trucks; you can also be assured
of the best quality of the Genuine Volvo Parts.
Each Genuine Volvo part is manufactured according
to the exact specifications, material, dimensions and
tolerance as the part it is replacing. These stringent
quality norms ensure that the new part works in parallel
with the other parts, thus ensuring higher vehicle
uptime.
Volvo Genuine Parts offer the following benefits:
Key
Nos
V
S
P
C
Hub Dealer
4
Sub Total
14
P
S
D
Dealer
10
Dealer
4
Site Support
6
Sub Dealer
3
Sub Total
13
Total
27
Site Support
132
Total Customer Touch Points
159
Better quality
Higher reliability
Better availability
Flexibility of inventory and logistics management
Promised warranty
Higher lifetime performance
Genuine Volvo Lubricants
Genuine Volvo Lubricants are manufactured for exact
specifications and specially tested to meet the stringent
requirements of quality & safety to guarantee efficient
performance and higher vehicle uptime. Volvo has its
own quality norm – the Volvo Drain Specification (VDS)
to ensure optimum engine performance and protection.
It also ensures longer service intervals, which reduces
the maintenance cost. It enhances the life of aggregates,
thereby preventing frequent stops and ensuring better
uptime. Genuine Volvo Lubricant barrels guarantee the
right quality and quantity.
Key advantages:
– Customised service offerings best suited for your
business needs
– More hours available for truck operation
– Protection from unexpected expenses
– Well planned maintenance cost for today and
tomorrow
Volvo Service Agreements
Volvo Service Agreements provide the best care for
your trucks to ensure higher efficiency and uptime
to continue delivering world class performance. The
service is done by certified technicians at a time that
is convenient to you, resulting in minimal operation
disruption. The Service Agreements not only adds value
to your business but also has an encouraging effect on
your bottom-line. The Agreements help you save time,
money and control vehicle maintenance expenditure. A
properly serviced truck runs more efficiently and lowers
the total cost of ownership.
Fleet Management
Volvo offers a host of soft offerings taking the service
experience to an all new level, which includes new
offerings such as Dynafleet Telematic Solution for realtime fleet management, hassle-free insurance, collision
restorative services and driver advisories.
The existing agreements are further enhanced with
new offerings spanning from dedicated uptime support,
customized service value packs to managing an entire
fleet through Fleet Management Services.
Uptime Support
Moving high volumes at optimal cost is critical in the
mining industry for higher operational efficiency. Given
the need it is imperative for mining trucks to endure dusty
environment, tougher terrains, higher payloads and longer
operating hours. To ensure higher efficiency, we have
integrated uptime into the core of our service offerings
with faster turnaround times and improved driver comfort
& safety.
Service Value Packs
Our customised Service Value Packs are designed to suit
a variety of requirements, such as preventive maintenance,
driveline coverage, hassle-free insurance, availability of
parts on site and the ease of fleet monitoring systems.
27
Unit No. 502, 5th Floor, Southern Wing (Wing-B), Embassy Prime, Bagmane Techpark, C V Raman Nagar, Bengaluru - 560 093.
Phone: +91 80 6788 7000, Fax: +91 80 6788 7124.
For more information contact: vtimarketing@volvo.in
Follow us on:
BR-New FMX 520 26.1 DT_11.15A
www.volvotrucksindia.com
New Delhi: 401, 4th Floor, Salcon Aurum, Plot No. 4, Jasola District Centre, Jasola, New Delhi 110 025. Phone: 011 4065 6700-03, Fax: 011 4065 6707.
Raipur: #505-506, Mangeto Offizo, Labhandi, G E Road, Raipur 492 010. Phone: 0771 404 5449, Fax: 0771 404 5449.
Bengaluru: Unit No. 502, 5th Floor, Southern Wing (Wing-B), Embassy Prime, Bagmane Techpark, C V Raman Nagar, Bengaluru 560 093. Phone: 080 6788 7000, Fax: 080 6788 7124.
Mumbai: 205 - 208, B- Wing, Floral Deck Plaza, MIDC Central Road, Andheri (E), Mumbai 400 093. Phone: 022 2834 5020, 2834 4293 / 2834 4266, Fax: 022 2834 4263 .
Ahmedabad: D-706, Ganesh Meridian, Opp. Gujarat High Court, S G Highway, Ahmedabad 380 061. Phone: +91 90990 81669.
Kolkata: 7A /1A, Middleton Street, Gooptu Court, 2 nd Floor, Kolkata 700 071. Phone: 033 2281 0794 / 95 / 2280 8241, Fax: 033 2283 1767.
Hyderabad: 404, Prajay Corporate House, Chikoti Gardens, Begumpet, Hyderabad 500 016. Phone: 040 4020 0929, Fax: 040 6648 2674.