stk 2800 / fakra

wire processing
!
W
E
N
STK 2800 / FAKRA
STK 2800 - FAKRA
Automatic Machine
for
Processing Coax Cable
for
Automotive Applications
Designed for flexible product processing with variable performance, this modularly designed machine is capable of processing various types of
coaxial cables and various types of FAKRA automation standard coax connectors in 90° and/or 180° versions.
The typical process steps are:
•
•
•
•
•
•
Cable feeding from a pre-feeder and cutting to length or
Manual cable loading by operator (pre-coiled or not)
Outer insulation stripping
Support sleeve crimping, if needed
Shield folding back, if needed
Support sleeve crimping, if needed
•
•
•
•
•
•
•
Inner insulation stripping
Inner connector crimping
Outer connector feeding, placing and crimping
Plastic housing feeding, coding verification and assembly
Product testing and verification
Product labeling
Buffering, coiling and packaging
Fully configured, this type of machine can produce up to 1’100 fully tested and ready to ship cables per hour. The modular machine concept
allows machine configurations to either assemble only one connector gender or to produce combination such as male/female or even straight
or angled connectors on the same line.
A typical machine configuration:
Technical Data / Technische Daten:
Cable types / Kabeltypen:
Cable length / Kabellänge:
Stripping length outer insulation / Abmantellänge Aussenisolation:
Stripping length dielectric insulation / Abmantellänge Isolation Innenleiter:
Connector type / Kontakttyp:
Inner conductor crimping / Innenleiter Anschlagen:
Outer connector crimping / Aussenkontakt Anschlagen:
Production rate – Fertigungsleistung:
Machine control / Maschinensteuerung:
Machine availability / Maschinenverfügbarkeit:
Electrical supply – Elektrischer Anschluss:
Air supply - Druckluft:
RG 174; RG 58; 75 Ω; RTK031
other types upon request / andere Typen auf Anfrage
150 mm - 10’000 mm
≥ 5m requires conveyor on floor; ≥5m benötigt Förderband am Boden
3 - 20mm; adjustable / einstellbar
2 - 10mm; adjustable / einstellbar
FAKRA compatible; designed for automated processing
FAKRA-kompatibel; Entwickelt für automatische Verarbeitung
electro mechanical press / elektrische Anschlagpresse
with crimp force monitoring / mit Crimpkraftüberwachung
electro mechanical press / elektrische Anschlagpresse
with hexagon crimp / mit hexagonaler Crimpform
ca. 550 cables/h @ cable length ≤ 2m; auto or handloading
ca. 550 Kabel/h bei einer Kabellänge ≤ 2m; Auto or Handladen
ca. 1’100 cables/h @ Kabellänge < 2m, double station
ca. 1’100 cables/h @ Kabellänge < 2m, Doppelstationen
Siemens S7 PLC with MMI-terminal
Siemens S7 SPS mit MMI-Terminal
90 - 95%, depending on cable and contact configuration
90 - 95%, abhängig von der Kabel- und Kontaktkonfiguration
400 VAC, ± 10% (3P+N+E), 50Hz
≥ 6 bar
Innovation by
Curti Costruzioni Meccaniche S.p.A.
Via Emilia Ponente 750, 48014 Castel Bolognese (RA), Italy
Tel: +39 0546 656 065 - Fax: +39 0546 505 51 - Email: infocable@curti-it.com - Web: www.curti.com
Questi dati potranno essere variati senza preavviso. This data can be changed without notice.