Anlage - DAkkS

 Deutsche Akkreditierungsstelle GmbH Anlage zur Akkreditierungsurkunde D‐PL‐18137‐01‐00 nach DIN EN ISO/IEC 17025:2005 Gültigkeitsdauer: 26.04.2016 bis 27.02.2018 Ausstellungsdatum: 26.04.2016
Urkundeninhaber: Continental Reifen Deutschland GmbH Vahrenwalder Straße 9 30165 Hannover an den Standorten: Jädekamp 30, 30419 Hannover Philipsstraße 15, 52068 Aachen Contistraße 1, 29323 Wietze‐Jeversen 1588 Dabieshan Road, 231283 Hefei/Anhui (China) 6969 FM 117 Batsville Road, 78801 Uvalde/Texas (USA) Prüfungen in den Bereichen: Prüfungen von Reifen und Material für die Automobilindustrie verwendete Abkürzungen: siehe letzte Seite Die aufgeführten Prüfungen sind, bezogen auf die Standorte, wie folgt gekennzeichnet: H = Standort Hannover A = Standort Aachen W = Standort Wietze‐Jeversen C = Standort Hefei (China) U = Standort Uvalde (USA) Seite 1 von 11
Anlage zur Akkreditierungsurkunde D‐PL‐18137‐01‐00 Hochgeschwindigkeitstest (H; A; C) UNECE‐R 30 Regelung Nr. 30 der Wirtschaftskommission der Vereinten 2013 Nationen für Europa (UN/ECE) ‐ Einheitliche Bedingungen für die Genehmigung der Luftreifen für Kraftfahrzeuge und ihre Anhänger, Revision 3 UNECE‐R 54 Regelung Nr. 54 der Wirtschaftskommission der Vereinten 2013 Nationen für Europa (UN/ECE) ‐ Einheitliche Bedingungen für die Genehmigung der Luftreifen für Nutzfahrzeuge und ihre Anhänger 92/23/EWG RICHTLINIE 92/23/EWG DES RATES vom 31. März 1992 über 1992 den Reifen von Kraftfahrzeugen und Kraftfahrzeuganhängern und über ihre Montage Regelung Nr. 75 der Wirtschaftskommission für Europa der UNECE‐R 75 2010 Vereinten Nationen (UN/ECE) ‐ Einheitliche Bedingungen für die Genehmigung der Luftreifen für Krafträder und Mopeds FMVSS 109 New Pneumatic And Certain Specialty Tires
2013 FMVSS 119 New Pneumatic Tires For Motor Vehicles With A GVWR Of 2012 More Than 4,536 Kilograms (10,000 Pounds) And Motorcycles FMVSS 139 New Pneumatic Radial Tires for Light Vehicles 2012 GB/T 4501 Laboratory Test Methods for Truck and Bus Tyres Capabilities
2008 GB/T 4502 Laboratory Test Method for Passenger Car Tyres Capabilities
2009 GB/T 13203 Test Methods for Verifying Capabilities of Motorcycle Tyres
2014 IS 15627 Automotive vehicles ‐ Pneumatic tyres for two and three‐
2005 wheeled motor vehicles ‐ specification (bis Amendment 1 vom Mai 2011) IS 15633 Automotive vehicles ‐ pneumatic tyres for passenger car 2005 vehicles ‐ diagonal and radial ply ‐ specification (bis Amendment 3 vom Juli 2014) Gültigkeitsdauer: 26.04.2016 bis 27.02.2018
Ausstellungsdatum: 26.04.2016 Seite 2 von 11
Anlage zur Akkreditierungsurkunde D‐PL‐18137‐01‐00 IS 15636 2012 GSO 52 2007 GSO 53 2007 INMETRO 83/2008 2008 INMETRO 165/2008 2008 INMETRO 205/2008 2008 INMETRO 544/2012 2015 SNI 0098 2012 SNI 0100 2012 TSD 109 2013 TSD 119 2013 TSD 139 2013 MS 149 2008 MS 1394 2008 Automotive Vehicles ‐ Pneumatic Tyres for Commercial Vehicles ‐ Diagonal and Radial Ply – Specification (bis Amendment 1 vom Juli 2014) Passenger Car Tyres Part 2: General Requirements Passenger Car Tyres Part 3: Methods Of Test Technical regulation of the quality of new tires for motorcycle, scooter and moped Technical quality regulation for new tires used on passenger cars, including those intended for mixed use, and towed vehicles Technical quality regulation for new tires used on commercial, light commercial and towed vehicles Requirements for Conformity Assessment of new tyres (einschließlich der Amendments 538/2013 und 365/2015) National Standard of Indonesia of Passenger Car Tires National Standard of Indonesia of Light Truck Tires New Tires and Certain Specialty Tires
New Tires of Motor Vehicles With a GVWR of more than 4,536 kg and Motorcycles New Radial Ply Tires for Motor Vehicles With a GVWR of 4,536 kg or Less Specification for New Pneumatic Passenger Car Tyres (First Revision) New Pneumatic Tyres for Highway Vehicles Other Than Passenger Cars ‐ Specification (First Revision) Gültigkeitsdauer: 26.04.2016 bis 27.02.2018
Ausstellungsdatum: 26.04.2016 Seite 3 von 11
Anlage zur Akkreditierungsurkunde D‐PL‐18137‐01‐00 NTE INEN 2097 2012 NTE INEN 2099 2013 NTE INEN 2100 2013 NOM‐086‐SCFI 2010 Pneumatic Tires Type II and Type III ‐ Test Methods Pneumatic Tires for Passenger Cars ‐ Specifications Pneumatic Tires for Freight Cars ‐ Specifications New radial tires, used by any vehicle with a gross weight equal to or less than 4,536 kg (10,000 pounds) ‐ Safety specifications and testing methods Dauerhaltbarkeit (H; A; C) UNECE‐R 54 2013 Richtlinie 92/23/EWG 1992 FMVSS 109 2013 FMVSS 119 2012 FMVSS 139 2012 GB/T 4501 2008 GB/T 4502 2009 GB/T 13203 2014 IS 15627 2005 Regelung Nr. 54 der Wirtschaftskommission der Vereinten Nationen für Europa (UN/ECE) ‐ Einheitliche Bedingungen für die Genehmigung der Luftreifen für Nutzfahrzeuge und ihre Anhänger RICHTLINIE 92/23/EWG DES RATES vom 31. März 1992 über den Reifen von Kraftfahrzeugen und Kraftfahrzeuganhängern und über ihre Montage New Pneumatic And Certain Specialty Tires
New Pneumatic Tires For Motor Vehicles With A GVWR Of More Than 4,536 Kilograms (10,000 Pounds) And Motorcycles New Pneumatic Radial Tires for Light Vehicles Laboratory Test Methods for Truck and Bus Tyres Capabilities
Laboratory Test Method for Passenger Car Tyres Capabilities
Test Methods for Verifying Capabilities of Motorcycle Tyres
Automotive vehicles ‐ Pneumatic tyres for two and three‐
wheeled motor vehicles ‐ specification (bis Amendment 1 vom Mai 2011) Gültigkeitsdauer: 26.04.2016 bis 27.02.2018
Ausstellungsdatum: 26.04.2016 Seite 4 von 11
Anlage zur Akkreditierungsurkunde D‐PL‐18137‐01‐00 IS 15633 2005 IS 15636 2012 GSO 52 2007 GSO 53 2007 GS 646 1996 INMETRO 205/2008 2008 SNI 0098 2012 SNI 0099 2012 SNI 0100 2012 TSD 109 2013 TSD 119 2013 TSD 139 2013 NTE INEN 2097 2012 NTE INEN 2099 2013 Automotive vehicles ‐ pneumatic tyres for passenger car vehicles ‐ diagonal and radial ply – specification (bis Amendment 3 vom Juli 2014) Automotive Vehicles ‐ Pneumatic Tyres For Commercial Vehicles ‐ Diagonal And Radial Ply – Specification (bis Amendment 1 vom Juli 2014) Passenger Car Tyres ‐ Part 2: General Requirements Passenger Car Tyres ‐ Part 3: Methods Of Test Multi Purpose Vehicles, Trucks Buses and Trailer Tyres ‐ Part 2: Methods of test Technical quality regulation for new tires used on commercial, light commercial and towed vehicles National Standard of Indonesia of Passenger Car Tires National Standard of Indonesia of Truck and Bus Tires National Standard of Indonesia of Light Truck Tires New Tires and Certain Specialty Tires
New Tires of Motor Vehicles With a GVWR of more than 4,536 kg and Motorcycles New Radial Ply Tires for Motor Vehicles With a GVWR of 4,536 kg or Less Pneumatic Tires Type II and Type III ‐ Test Methods Pneumatic Tires for Passenger Cars ‐ Specifications Gültigkeitsdauer: 26.04.2016 bis 27.02.2018
Ausstellungsdatum: 26.04.2016 Seite 5 von 11
Anlage zur Akkreditierungsurkunde D‐PL‐18137‐01‐00 NTE INEN 2100 2013 MS 149 2008 MS 1394 2008 NOM‐086‐SCFI 2010 Pneumatic Tires for Freight Cars ‐ Specifications Specification for New Pneumatic Passenger Car Tyres New Pneumatic Tyres for Highway Vehicles Other Than Passenger Cars ‐ Specification New radial tires, used by any vehicle with a gross weight equal to or less than 4,536 kg (10,000 pounds) ‐ Safety specifications and testing methods Durchstoßprüfung (H; A; C) FMVSS 109 2013 FMVSS 119 2012 FMVSS 139 2012 GB/T 4501 2008 GB/T 4502 2009 IS 15627 2005 IS 15633 2005 IS 15636 2012 GSO 52 2007 New Pneumatic And Certain Specialty Tires
New Pneumatic Tires For Motor Vehicles With A GVWR Of More Than 4,536 Kilograms (10,000 Pounds) And Motorcycles New Pneumatic Radial Tires for Light Vehicles Laboratory Test Methods for Truck and Bus Tyres Capabilities
Laboratory Test Methods for Passenger Car Tyres Capabilities
Automotive vehicles ‐ Pneumatic tyres for two and three‐
wheeled motor vehicles ‐ specification (bis Amendment 1 vom Mai 2011) Automotive Vehicles ‐ Pneumatic Tyres For Passenger Car Vehicles ‐ Diagonal And Radial Ply – Specification (bis Amendment 3 vom Juli 2014) Automotive Vehicles ‐ Pneumatic Tyres For Commercial Car Vehicles ‐ Diagonal And Radial Ply ‐ Specification (bis Amendment 1 vom Juli 2014) Passenger Car Tyres ‐ Part 2: General Requirements Gültigkeitsdauer: 26.04.2016 bis 27.02.2018
Ausstellungsdatum: 26.04.2016 Seite 6 von 11
Anlage zur Akkreditierungsurkunde D‐PL‐18137‐01‐00 GSO 53 2007 GS 646 1996 GS 647 2005 SNI 0098 2012 SNI 0099 2012 SNI 0100 2012 TSD 109 2013 TSD 119 2013 TSD 139 2013 NOM‐086‐SCFI 2010 Passenger Car Tyres ‐ Part 3: Methods Of Test Multi Purpose Vehicles, Trucks Buses And Trailer Tyres ‐
Part 2: Methods Of Test Multi Purpose Vehicles, Trucks, Buses And Trailer Tyres ‐ Part 3: General Requirements National Standard of Indonesia of Passenger Car Tires National Standard of Indonesia of Truck And Bus Tire National Standard of Indonesia of Light Truck Tire New Tires and Certain Specialty Tires
New Tires of Motor Vehicles With a GVWR of more than 4,536 kg and Motorcycles New Radial Ply Tires for Motor Vehicles With a GVWR of 4,536 kg or Less New radial tires, used by any vehicle with a gross weight equal to or less than 4,536 kg (10,000 pounds) ‐ Safety specifications and testing methods Wulstabdrücktest (H; A; C) FMVSS 109 2013 FMVSS 119 FMVSS 139 2012 GB/T 4502 2012 New Pneumatic And Certain Specialty Tires
New Pneumatic Tires for Motor Vehicles with a GVWR of more than 4,536 kilograms (10,000 Pounds) and Motorcycles New Pneumatic Radial Tires For Light Vehicles Laboratory Test Methods For Passenger Car Tyres Capabilities
Gültigkeitsdauer: 26.04.2016 bis 27.02.2018
Ausstellungsdatum: 26.04.2016 Seite 7 von 11
Anlage zur Akkreditierungsurkunde D‐PL‐18137‐01‐00 IS 15633 2005 GSO 52 2007 GSO 53 2007 SNI 0098 2012 NOM‐086‐SCFI 2010 Automotive Vehicles ‐ Pneumatic Tyres For Passenger Car Vehicles ‐ Diagonal And Radial Ply – Specification (bis Amendment 3 vom Juli 2014) Passenger Car Tyres ‐ Part 2: General Requirements Passenger Car Tyres ‐ Part 3: Methods Of Test National Standard of Indonesia of Passenger Car Tires New radial tires, used by any vehicle with a gross weight equal to or less than 4,536 kg (10,000 pounds) ‐ Safety specifications and testing methods Reifenvermessung (H; A; C) UNECE‐R 30 2013 UNECE‐R 54 2013 UNECE‐R 75 2010 FMVSS 109 2013 FMVSS 139 2012 INMETRO 83/2008 2008 INMETRO 165/2008 2008 Regelung Nr. 30 der Wirtschaftskommission der Vereinten Nationen für Europa (UN/ECE) ‐ Einheitliche Bedingungen für die Genehmigung der Luftreifen für Kraftfahrzeuge und ihre Anhänger, Revision 3 Regelung Nr. 54 der Wirtschaftskommission der Vereinten Nationen für Europa (UN/ECE) ‐ Einheitliche Bedingungen für die Genehmigung der Luftreifen für Nutzfahrzeuge und ihre Anhänger Regelung Nr. 75 der Wirtschaftskommission für Europa der Vereinten Nationen (UN/ECE) ‐ Einheitliche Bedingungen für die Genehmigung der Luftreifen für Krafträder und Mopeds New Pneumatic And Certain Specialty Tires
New Pneumatic Radial Tires for Light Vehicles Technical regulation of the quality of new tires for motorcycle, scooter and moped Technical quality regulation for new tires used on passenger cars, including those intended for mixed use, and towed vehicles Gültigkeitsdauer: 26.04.2016 bis 27.02.2018
Ausstellungsdatum: 26.04.2016 Seite 8 von 11
Anlage zur Akkreditierungsurkunde D‐PL‐18137‐01‐00 INMETRO 205/2008 2008 MS 149 2008 SNI 0098 2012 IS 15627 2005 IS 15633 2005 IS 15636 2012 GB/T 521 2012 Technical quality regulation for new tires used on commercial, light commercial and towed vehicles Specification for New Pneumatic Passenger Car Tyres (First Revision) National Standard of Indonesia of Passenger Car Tires Automotive vehicles ‐ Pneumatic tyres for two and three‐
wheeled motor vehicles ‐ specification (bis Amendment 1 vom Mai 2011) Automotive Vehicles ‐ Pneumatic Tyres For Passenger Car Vehicles ‐ Diagonal And Radial Ply ‐ Specification Automotive Vehicles ‐ Pneumatic Tyres For Commercial Car Vehicles ‐ Diagonal And Radial Ply ‐ Specification (bis Amendment 1 vom Juli 2014) Test Method of Measuring Peripheral Dimensions for Tyres Rollwiderstand (H; A) UNECE R‐117.02 2014 Regulation 1222 2009/EC (as amended by Regulation 228/2011/EU, 1235/2011/EU) 2011 ISO 28580 2009 Inmetro 544/2012 2012 SASO 2857 2015 Uniform provisions concerning the approval of tyres with regard to rolling sound emissions and to adhesion on wet surfaces and/or to rolling resistance Labelling Of Tyres With Respect To Fuel Efficiency And Other Essential Parameters Passenger car, truck and bus tyres ‐ Methods of measuring rolling resistance ‐ Single point test and correlation of measurement results Requirements for Conformity Assessment of new tyres (einschließlich der Amendments 538/2013 und 365/2015) Vehicle Tires Rolling Resistance And Wet Grip Requirements
Gültigkeitsdauer: 26.04.2016 bis 27.02.2018
Ausstellungsdatum: 26.04.2016 Seite 9 von 11
Anlage zur Akkreditierungsurkunde D‐PL‐18137‐01‐00 Korean Label Regulation
2011/237 2013 Korean Regulations regarding car tire energy consumption efficiency measurements, grade standards, markings, etc. (einschl. der Änderungen bis 23.10.2013) Geräuschtest (W; U) UNECE R‐117.02 2014 Uniform provisions concerning the approval of tyres with regard to rolling sound emissions and to adhesion on wet surfaces and/or to rolling resistance Labelling Of Tyres With Respect To Fuel Efficiency And Other Essential Parameters Regulation 1222 2009/EC (as amended by Regulation 228/2011/EU, 1235/2011/EU) 2011 Inmetro 544/2012 Requirements for Conformity Assessment of new tyres 2012 (einschließlich der Amendments 538/2013 und 365/2015) Nassgriff (W; U) UNECE R‐117.02 2014 Regulation 1222 2009/EC (as amended by Regulation 228/2011/EU, 1235/2011/EU) 2011 Inmetro 544/2012 2012 SASO 2857 2015 Korean Label Regulation
2011/237 2013 Uniform provisions concerning the approval of tyres with regard to rolling sound emissions and to adhesion on wet surfaces and/or to rolling resistance Labelling Of Tyres With Respect To Fuel Efficiency And Other Essential Parameters Requirements for Conformity Assessment of new tyres (einschließlich der Amendments 538/2013 und 365/2015) Vehicle Tires Rolling Resistance And Wet Grip Requirements
Korean Regulations regarding car tire energy consumption efficiency measurements, grade standards, markings, etc. (einschließlich der Änderungen bis 23.10.2013) Gültigkeitsdauer: 26.04.2016 bis 27.02.2018
Ausstellungsdatum: 26.04.2016 Seite 10 von 11
Anlage zur Akkreditierungsurkunde D‐PL‐18137‐01‐00 verwendete Abkürzungen AIS CMVSS EWG FMVSS GB/T GS GSO INMETRO IS MS NOM NTE INEN SASO SNI TSD UNECE (Indian) Automotive Industry Standard Canadian Motor Vehicle Safety Standards Europäische Wirtschaftsgemeinschaft United States´ Federal Motor Vehicle Safety Standards Guo Biao Tuijian (Chinese Recommended National Standard) Gulf Standard Standardization Organization of the Gulf Cooperation Council Brazilian National Institute of Metrology, Normalization and Industrial Quality Indian Standard Malaysian Standard Mexican Standard Ecuador Standard Saudi Standards, Metrology and Quality Organization Standard Nasional Indonesia (Indonesian National Standard) (Canadian) Technical Standards Document United Nations Economic Commission for Europe Gültigkeitsdauer: 26.04.2016 bis 27.02.2018
Ausstellungsdatum: 26.04.2016 Seite 11 von 11