With know-how to success! – Get fit! KaVo CAD/CAM Training Schedule

KaVo CAD/CAM Training Schedule
July – November 2014
With know-how to success! – Get fit!
Overview:
For the second half of year 2014 we offer the following courses:

KaVo ARCTICA CAD/CAM System – advanced level

KaVo ARCTICA Engine – training on milling unit

KaVo multiCAD Expert training – provisional crown, bite splints, virtual
articulator

KaVo multiCAD Expert training – implant module, bar design, tooth library

KaVo Everest CAM²
General information on the courses:
All trainings will take place at KaVo head quarter in Biberach an der Riss,
Germany. The number of participants is limited to a maximum of 8.
For further information and/or to register for one of the above mentioned
trainings, please contact our KaVo CAMPUS team:
Your personal contact person for international course organization is:
Mrs. Ana Villarrubia, you may reach her via email: ana.villarrubia@kavo.com;
phone: 0049 (0) 7351 56 1437.
1
KaVo CAD/CAM Training Schedule
July – November 2014
KaVo ARCTICA CAD/CAM System – advanced level
This two-day training will focus on bridges, inlays, onlays and veneers. You will
learn to do a good nesting and how to import STL-data. Furthermore you will get
an overview of the add-on modules we offer for our KaVo multiCAD software. Of
course our application engineers will provide you with useful tips and tricks that
you can make first use of during the hands on part of the training.
Target group: English-speaking ARCTICA users with basic skills in working with
the system components.
Minimum requirements for participation: Basic skills in scanning with a KaVo
scanner and designing with KaVo multiCAD basic software.
Costs: This training is FOC for KaVo Sales Reps and specialized dealers. End
customers who register for this training will be charged with 450,00 € + VAT per
participant, for any additional participant per lab we will charge 350,00 € + VAT.
Course dates:
 10th and 11th November 2014
 24th and 25th November 2014
2
KaVo CAD/CAM Training Schedule
July – November 2014
KaVo ARCTICA Engine – training on milling unit
This one-day training will introduce you to our KaVo ARCTICA mill. You will get
an overview of the ARCTICA CAM software, the Nesting and KaVo CSS. You will
learn how to import STL files from third party scanners and/or CAD SW. A short
excursion to the KaVo CAD/CAM material variety is also part of the training. Of
course there is enough time for questions and answers, discussion and practice.
Target group: English-speaking dental technicians and dentists
Costs: This training will cost 300,00 € + VAT per participant, any additional
participant per lab will be charged with 200,00 € + VAT.
Course dates:
 20th October 2014
 21st November 2014
3
KaVo CAD/CAM Training Schedule
July – November 2014
KaVo multiCAD Expert training – provisional crown, bite splints,
virtual articulator
During this one day training our application engineers will show you expert skills
and teach you with tips and tricks on how to successfully work with the new
KaVo multiCAD Upgrade Modules. The training will focus on the Upgrade Modules
Provisional crown, bite splints and virtual articulator. You will have enough time
to practically work with the software and consequently will be well prepared for
your daily work back in your lab or practice.
Target group: English-speaking ARCTICA and Everest customers that already
work with the KaVo multiCAD software.
Requirements for participation: Basic skills in designing with KaVo multiCAD
basic software.
Costs: This training will cost 300,00 € + VAT per participant, any additional
participant per lab will be charged with 200,00 € + VAT.
Course dates:
 30th July 2014
 17st September 2014
4
KaVo CAD/CAM Training Schedule
July – November 2014
KaVo multiCAD Expert training – implant module, bar design, tooth
library
During this one day training our application engineers will show you expert skills
and teach you with tips and tricks on how to successfully work with KaVo
multiCAD Upgrade Modules. The training will focus on the implant module, bar
design and tooth library. You will have enough time to practically work with the
software and consequently will be well prepared for your daily work back in your
lab or practice.
Target group: English-speaking ARCTICA and Everest customers that already
work with the KaVo multiCAD software.
Requirements for participation: Basic skills in designing with KaVo multiCAD
basic software.
Costs: This training will cost 300,00 € + VAT per participant, any additional
participant per lab will be charged with 200,00 € + VAT.
Course dates:
 31th July 2014
 18st September 2014
5
KaVo CAD/CAM Training Schedule
July – November 2014
KaVo Everest CAM² - Come and visit us for testing!
Learn more about the new features and functionalities of new Everest CAM²
software. The one-day course will offer you the opportunity to practically work
with the new software. One of our well-experienced application engineers will
personally take care of you and support you with your decision to invest.
Target group: English-speaking Everest users that have not yet bought the new
Everest CAM² software.
Costs: This training is free of charge, travel costs (journey, hotel, etc.) have to
be borne by participants
Course date: 10th October 2014
6