Sample Cover and ULPA-Filtered Enclosures for SC-DX Autosamplers Elemental Scientific Introduction

Transcription

Sample Cover and ULPA-Filtered Enclosures for SC-DX Autosamplers Elemental Scientific Introduction
Elemental Scientific
Enclosures for SC-DX Autosamplers
Sample Cover and ULPA-Filtered Enclosures
for SC-DX Autosamplers
Introduction
ICP and ICPMS sample integrity is maintained with the enclosures
for the ESI SC-2 DX and SC-4 DX autosamplers. The enclosures
can be configured either as a dust cover or ULPA-filtered minienvironment.
Benefits
• Protects samples from airborne contamination
• Exhaust acid fumes to protect the laboratory environment
• Clear acrylic construction for easy sample viewing
• Covers only the sample area—the electronics are kept outside the enclosure
• Large hinged door provides easy access to sample racks at any time
SC-2 DX Autosampler with Enclosure
• Exhaust port (50 mm, included) connects to
laboratory ventilation system
• The ULPA (Ultra-Low Particle Arrester) filter upgrade is 99.999%efficient down to 0.12 microns
SC-2 DX and SC-4 DX with ULPA Filter
SC-4 DX Autosampler with Enclosure
ULPA Filter Specifications
Air Vol.
Noise Level
Power
1 m /min
56 dBA
25 W
3
Enclosure with
ULPA Filter
Autosampler Model
Enclosure
Enclosure for SC-µ
SC-8106
Enclosure for SC-2 DX
SC-1207-DX
SC-1207-DX-1200
Enclosure for SC-4 DX
SC-1407-DX
SC-1407-DX-1200
Enclosure for SC-8 DX
SC-1807-DX
SC-1807-DX-1000
Enclosure for SC-14 DX
SC-1107-DX
SC-1107-DX-1030
Elemental Scientific
1500 North 24th Street
Omaha, NE 68110 USA
Phone: 1.402.991.7800
Fax: 1.402.991.7799
SC-8 DX
Autosampler
with Enclosure
Email: esi@icpms.com
Web: www.icpms.com